American Value Product specifications

General AMERICAN VALUE By Hi-Lo Industries, Inc. 3/21/2016 American Value 1

Table Of Contents 1. Warranty 3 2. Credit Policy 4 3. Jobsite Delivery Guidelines 4 4. Company Policies 5-8 5. Hi-Lo Industries and Dealer Agreement 9 6. Sales Aides 10-11 7. Style Choices 12-13 8. Construction Specifications 14-18 12. Modifications M1-M10 13. Wall Cabinets W1-W20 14. Base Cabinets B1-B14 15. Vanity Cabinets V1-V7 16. Tall Cabinets T1-T11 17. Accessories ACC 1- ACC 9 18. Forms Form 1 - Form 3 19. Index Index 1 - Index 3 American Value 2 Revised 07/23/2012

Introduction WARRANTY Under no circumstances shall Hi-Lo Industries be lia- ble to the purchaser or any other persons for any spe- Hi-Lo Industries, Inc. D/B/A cial or consequential damages, whether arising out of General Hi-Lo Industries, Inc. breach of warranty, breach of contract, or otherwise. 908 West Chestnut Street Except as provided herein, no warranty or affirmation, Chanute, KS 66720 of fact, express or implied is made or authorized by Hi- 620-431-8300 (Phone) Lo Industries and the company's liability is in all events limited to the purchase price paid. 620-431-8325 (Fax) This warranty gives you specific legal rights and you Hi-Lo Industries gives a limited warranty to the original may also have other rights, which vary, from state to purchaser of this product that, should it prove defec- state. Certain aspects of disclaimers are not applicable tive by reason of improper workmanship or materials to consumer products in some states: e.g.. (a) Some under normal and reasonable use, that: states do not allow the exclusion or limitation of inci- dental or consequential damages, so the above limita- tion or exclusions may not apply to you: (b) Also, some states do not allow limitations on how long an implied A. For three (3) years from the date of warranty lasts, consequently the above limitation may the original purchase at retail, Hi-Lo Industries will re- not apply to you, and (c) by law, during the period of pair or replace, at its option, any defective part without this limited warranty, any implied warranties of mer- charge for the parts, materials or in factory labor. Parts chantability or fitness for a particular purpose applica- used for replacement are warranted for the remainder ble to consumer products purchased by consumers of the original warranty period. may not be excluded or otherwise disclaimed. This warranty disclaimer shall be effective unless prohibited by provisions of state law where the product is sold to B. For warranty service the customer the original purchaser and in that event the provisions must contact an authorized Hi-Lo Industries service of applicable state law shall apply. center designated by the company and may be re- quired to deliver the product to the service center. Any PROMPT DISPOSITION. Hi-Lo Industries will make a shipping expenses necessary are the purchaser's re- good faith effort for prompt correction or other adjust- sponsibility. ment with respect to a product covered by this limited warranty. For service under this limited warranty con- THIS LIMITED WARRANTY DOES NOT COVER De- tact your dealer. If shipment to an authorized service fects caused by Modification, Alteration, Repair or Ser- center is necessary, the purchaser must obtain a re- vice of the product by anyone other than an authorized turn authorization number from the service center and Hi-Lo Industries service center, physical abuse to or it must be displayed on the return package, shipment misuse of the product or operation or use thereof in a of any product to a service center must be prepaid by manner contrary to the product instructions, which are the purchaser and is at the purchaser's expense. Hi- attached to your cabinets; commercial or rental use; or Lo Industries is not responsible for damage in transit costs of shipment of the product to an authorized ser- and the purchaser must file a damage claim with the vice center for service. carrier. WARRANTY DISCLAIMER. Any express warranty not provided herein, and any remedy for breach of con- tract which but for this provision might arise by implica- tion or operation of law, is hereby excluded and dis- claimed. The implied warranties or operation of law, is hereby excluded and disclaimed. The implied warran- ties of merchantability and of fitness for any particular purpose are expressly limited to a term of three (3) years. Hi-Lo Industries has made a diligent effort to illustrate and describe the products in its literature ac- curately; however, such illustrations and descriptions are for the sole purpose of identification and do not express or imply a warranty that the products are mer- chantable, or fit for a particular purpose, or that the products will necessarily conform to the illustrations or descriptions. American Value 3 Revised 03/09/2012

Introduction CREDIT POLICY the job site must meet the safety and entry guidelines All orders are subject to approval by our credit depart- below. ment. Terms for open account customers are 1% 10 days, net 30 days. Payment is considered to be re- JOB SITE DELIVERY GUIDELINES ceived if postmarked and mailed on or before the dis- count due date or net due date. Merchandise is billed When requesting a job site delivery, please be sure to F.O.B. Chanute, Kansas. review and follow these important guidelines: The following polices apply to cash discount: 1)The original order form must be marked for job site A. Discount will not be allowed when there are open delivery. undisputed, past due items on the account. 2)All requests for job site deliveries must be accompa- B. Cash discount is allowed on the net total, not nied by the following: freight. *Address and name of customer of where the cabinets C. If customer takes an unearned cash discount, it will are to be delivered be charged back regardless of amount. *Telephone number (if possible) of job site address or D. Cash discounts do not apply to display merchan- cell phone number dise. These items will be billed with published display discount shown on the invoice. These items will be *Detailed map of how to get to the job site from the billed at terms of net 30 days for open account cus- Dealer's place of business tomers. *All maps must be legible. Maps must consist of street E. Company may demand check upon delivery if ac- #, hwy # etc. count is delinquent. *If the job site is a new construction, provide Hi-Lo In- dustries with F. Order processing, as well as production is halted if *Lot number, contractor's name and subdivision name. account is delinquent. 3)The job site delivery charge includes the area within FREIGHT POLICY a 50-mile radius from the Dealer's place of business. All shipments are F.O.B. shipping point Chanute, Kan- A quote must be obtained from the factory for deliver- sas. The responsibility of the manufacturer ceases ies exceeding this radius. upon delivery of goods in good condition. Merchandise is not to be returned to the manufacturer without prop- 4)The job site must be accessible to a 72-foot tractor- er authorization from the factory. trailer. All shipping costs are based on Hi-Lo Industries Carri- 5)There can be no signs prohibiting truck from enter- ers. When shipping on dealer specified carri- ing the area. ers delivery charges may vary. 6)The carrier must be able to deliver the merchandise without damaging neighboring Note any damaged items received, but not returned to property. the factory on the packing slip, and have the driver initial agreement. 7)The job site must be accessible from the main roads. There can be no overhangs, dirt roads, sharp **Shipping information** turns or electrical lines, on the carrier's route to the job * Ship on our trucks or factory approved carrier site. * Package wrap At least 60 feet of roadway is required for the * Inspect upon delivery carrier to make a turn. All roads must be paved or * Have adequate personnel to accept tailgate delivery. rocked. No weight restrictions on roads or bridges. * Return damaged goods on same truck 8) The driver must be able to legally park the delivery **Job site delivery information** truck without impeding the flow of traffic or unloading. Job Site Delivery is available in some areas for an ad- Parking is very critical in metropolitan areas. ditional charge. Contact Customer Service or Schedul- ing / Shipping for additional charges and availability in 9) The dealer is responsible for delivering the cabinet your area. If Job Site Delivery is available in your area, order to the job site if a carrier determines the job site American Value 4 Revised 2/28/2016

Introduction is inaccessible. Drivers have final approval on job E-mail your orders to the following address: site deliveries. Job site delivery charge will still be [email protected] assessed if driver deems site inaccessible. General When we receive your order you will immedi- 10) If delays result because of the carrier's inability to ately get a response from our system acknowledging enter a job site, the dealer is responsible for all that we have received your email. reasonable costs resulting from the delay. Certain delays out of our control may occur. Should these de- Your orders are downloaded and placed on lays occur, and your scheduled delivery is going to be hold for 72 hours unless you have pre-approved the more than one hour late, our driver will notify you of immediate release of your order. If you have pre- the delay and let you know an approximate time of approved the release of your order a job number will delivery. be assigned and your order will be released to go onto our production schedule and no changes can be 11) The dealer is required to have adequate receiving made. An acknowledgement of receipt and confirma- personnel at the job site to unload the merchandise. tion of order will be sent back to you via e-mail to the The driver is only responsible for getting the mer- originating e-mail address that sent the order. We will chandise to the tail of the trailer. not fax you a copy of the original order that you e- mailed. 12) We recommend that all dealers visit job site loca- tion, prior to delivery, to ensure each of the above con- If you have not pre-approved your order a job ditions have been met. number will be assigned to your order and we will email an acknowledgement of receipt and confirmation of order. Your order will then be placed on hold for a How To Order maximum of 72 hours or until we receive the release of order authorization from the dealer giving permis- **Orders will be accepted only on Hi-Lo Industries E- sion to allow the order to go onto our production catalog program. You may e-mail your orders using schedule immediately. By sending the release of order the following address: authorization you are not only giving us permission to [email protected]. place your order on our production schedule but you are also agreeing not to submit any changes to the NO ORDERS WILL BE TAKEN BY PHONE OR FAX. order. No changes can be made once the release of order authorization has been received or 72 hours has elapsed since MAKE SURE YOU INCLUDE THE FOLLOWING IN- FORMATION: receipt of the order. It is the dealers’ responsibil- ity to ensure that the file that is sent as an order is the 1) PURCHASE ORDER NUMBER correct file. Hi-Lo Industries will not be responsible for 2) DATE OF ORDER incorrect files sent in as an order. 3) STYLE CHOICE Emailed orders are not checked by Hi-Lo In- 4) CUSTOMER NAME-WARRANTY dustries staff, so please ensure that the order is cor- rect and to the specifications that you need it to be. In the Ecatalog program you will have the opportunity We will not be accepting any changes via typed-in re- to indicate if you want the order released for immedi- quests on the e-mail that your order is attached to. ate production. There are 2 places in the Ecatalog pro- gram that you can indicate that decision. One place is No changes will be allowed once on the screen where you add your cabinets to the or- the signed release authorization has been der. The second will be in the print order section of the Ecatalog. For your order to go immediately onto received or the 72 hour timeframe has ex- our production schedule you must select this op- pired. tion prior to emailing the order. If you do not select this option, when we receive the order we will place it If there is an accessory, modification or customization into the 72 hour confirmation status. that you are unable to accomplish on the e-catalog please contact your sales representative or our cus- You may at any time during the 72 hour waiting period tomer service department for assistance. They can place the order onto our production schedule by re- help you accomplish what you need to do to ensure loading your order into the Ecatalog program and se- that your order is as complete as possible prior to the lecting “release” the order. You will then need to print order being submitted. the form and fax or re-email the order with the release authorization. **For Quick ship orders** American Value 5 Revised 04/15/2013

Introduction must be submitted using the e-catalog program. The To qualify for our standard quick ship program an or- E-catalog has the most up to date listing of items that der can only have a certain number of cabinets. are available on the 1-wk QS program. All items are Currently the limits are: those that can be shipped FEDEX. Therefore we are limited to the size of the item that can be shipped. The - A maximum of 28 items total following shipping options are the only shipping op- nd - A maximum of 3 cabinets tions available: FEDEX ground, FEDEX 2 day, FED- - A maximum of 25 accessories EX overnight. Customer pick up is not allowed. - A maximum of 10 doors / drawer fronts You may send in your order via e-mail only. If your order does not fall within these limits you will need to generate your order as a normal order. There will be an upcharge added to your or- der. This charge will be deducted from the order if we 24 hour hold policy for standard quick do not meet our 1-week lead time. If we do not ship ship orders. This policy applies to all orders All or- your order in the 1-week allotted we will also deduct ders received will automatically be placed into a 24 the cost of shipping from your order. We will then ship hour hold status unless it is marked for immediate re- your order by the shipping method indicated on the lease. This hold status is given to allow the dealer time order. You are limited to 3 line items and/or a total of for any changes / corrections to their order. Any 10 items. I.e.: (2) mcm (3) ocm & (4) sm or (10) mcm. changes / corrections to the order will be done at no charge during the 24 hour period. At anytime during that 24 hour timeframe the dealer may release the or- **For Quick ship orders** der for immediate placement into our production schedule. At the end of the 24 hours the order will au- No changes will be accepted by phone. A written re- tomatically be placed onto our production schedule. quest for changes must be submitted by fax. Compa- Once the order has been released for production, ny policy requires any orders with changes must whether by means of the dealer sending in a re- be re-sent for confirmation. lease of order authorization or the 24 hour time Changes to the ship to address on regular orders will period has expired, no changes can be made. be allowed up to 2 weeks after date of confirmation. By sending the release of order authorization you Any changes to the ship to address after 2 weeks from are not only giving us permission to start produc- date of confirmation will result in a minimum $130.00 tion on your order but you are also agreeing not to change order charge to the order and a possible submit any changes to the order. The date to base change to your shipping date depending on the loca- your lead time for production and delivery of the tion of the ship to address. order will be the date your order was released for Quick Ship changes. No changes will be accepted by production. phone. A written request for changes must be submit- ted by fax. You may only make changes to Quick All 24 hour holds will run from noon to Ships within 24 hours from date of confirmation. No noon Monday thru Friday. For example, if you re- changes will be allowed if request is submitted after 24 ceive a confirmation of your order at 10:00 A.M. on hours from date of confirmation. th Monday the 10 , then you will have until noon on th Tuesday the 11 to send in any changes or correc- **Cancel order policy ** tions to the order. If you receive your first confirmation for your or- No cancellation of orders will be taken by phone. You der at 2:00 P.M. on Monday, you will have until must fax a written cancellation order request. We ask noon on Wednesday to send in any changes or that the cancellation request be submitted on company corrections to the order. Please note: The 24 hour letterhead and signed. Upon receipt of the request we hold is from the first confirmation you received. will fax back an acknowledgment of cancellation. If you Additional confirmations sent due to changes will have not received a confirmation of cancellation within not add an additional 24 hours to the order. The 48 hours then it is the dealers responsibility to follow order will still be released at noon 24 hours after up. the first confirmation. **Order lead time ** 1-week expedited quick ship program: This is a limited version of our standard quick ship of- We will do our best to maintain a 25 working day lead- fering. This program will enable you to order selected time for our standard production orders. Certain cir- cumstances, incomplete orders and other unforeseen items with an expedited turn around time. It is limited to a very select few items. To ensure compatibility to factors may require additional time. For our quick ship orders our standard lead time is 10-15 working days our 1-week expedited quick ship program, all orders American Value 6 Revised 2/28/2016

Introduction from date of confirmation. **Concealed Damage** THE 25 WORKING DAY PRODUCTION AND DELIV- General ERY TIME BEGINS UPON THE COMPLETION OF When a shipment is delivered with no visible damage, THE 72 HOUR HOLD OR UPON RECEIPT OF THE but damage is discovered at a later time, the following AUTHORIZATION FOR IMMEDIATE RELEASE steps should be taken: FORM. Once damage is discovered, leave packaging intact **Ship With” standards** and notify the carrier immediately. Request that an inspection be made as soon as possible. All paperwork must have the ship with job #’s noted on Do not attempt to alter contents or packaging until in- the special instruction section. No PO’s please. spection is made or claim is settled. Standard lead-time orders that are requested to ship Record the date and name of person you contacted on with another order must be submitted with each other. freight bill. If an inspection has been waived, file a Quick Ship orders that are requested to ship with an claim immediately. Photograph the damages during existing order must be received in time to be produced inspection or only after inspection has been waived. and still match the load cycle of the order it is shipping Shortages: Before signing delivery receipt, check ship- with. This typically would be in the beginning of the ment for shortages. week before scheduled delivery. (Check shipping Examine the delivery receipt for a proper description schedule on our web page for more complete infor- and piece count. mation on truck schedules) Depending on size of item Determine the number of pieces missing for each item. being shipped, another mode of shipment other than If available, refer to the packing list for possible ship- our truck may be desirable. per errors. Notify carrier immediately when shortage occurs. Or- **Shipping definitions** ders that ship via our carriers and have missing items, those items must be reported within 24 hours of deliv- Full lead time deliveries: Full lead time deliveries are ery to be considered a short ship. those deliveries made up of standard full lead time Note the description and number of each item that is orders. Full lead time deliveries ship on contract carri- short on the delivery receipt. ers with drivers who are dedicated to hauling Hi-Lo If carrier cannot locate missing items within 72 hours, Industries products and are trained in Hi-Lo policies initiate claim procedure. and procedures. Hi-Lo freight rates for full lead time Photograph the damages during inspection or only are assigned to dealers at the time of account opening after inspection has been waived. and are subject to change upon written notice. PROCEDURE FOR RETURN GOODS FEDEX: This option is recommended to speed deliv- ery of smaller items. Freight charges are standard AUTHORIZATION FedEx including a packaging fee of $10.50 per item. Common Carrier: This option is available to speed A return goods authorization (RGA) should be issued delivery if larger items if necessary. Charges will vary for unacceptable parts due to freight damage or quality depending on size and destination of shipments. Call problems discovered at the time of delivery or during for delivery quote before choosing this delivery option. installation. **Loss and damage guidelines ** Below is the procedure for RGA submittals: Visible Damage: 1) All damaged items upon delivery should be Before signing delivery receipt, inspect for possible refused and returned on original truck or delivery. The damage dealer should qualify the problem personally, then When accepting damaged merchandise, place a writ- contact the manufacturer and be issued an RGA num- ten notation on delivery receipt. ber. If replacement parts are required, it is the dealer’s Always make a list of the following: responsibility to send in an order for them. a. Specific items damaged, the extent of the 2) If it is determined that a field repair is accepta- damage, and the value of the damaged items. Use ble to both the dealer and the manufacturer, and field specifics such as “top left corner”, “bottom right dent- repair is the most expedient and cost effective manner ed” Do not accept freight that is damaged beyond re- to solve the problem, then a cost should be agreed pair or is unusable. Note on delivery receipt upon between the two parties (in writing) before action “Damaged Refused”; describe items and umber of is taken. Dealer must be aware that this action must pieces being refused. Photograph damaged merchan- be approved (in writing) by the factory, and that any dise. action taken by the dealer, including labor claims prior American Value 7 Revised 2/28/2016

Introduction to obtaining factory approval is the responsibility of the what your dealer ID number is call our customer ser- dealer. A picture of the damaged merchandise must vice department and they can provide that for you. be submitted along with an invoice of the repairs, be- 6. That you enter the correct registration code at the fore credit will be issued. If an outside contractor is bottom. Your registration code will be located on the approved by the factory to do field repair work, the cover sleeve of the CD that your program came in. invoice must be submitted to the factory on that con- The code is case sensitive so ensure that you enter it tractor's invoice form. A credit will be issued to the all in UPPER CASE. dealer's account in the case of approved field repairs. Once you have all the information filled out then click No checks will be issued by the factory for field repair. on “OK”. If you have everything correct the window will We reserve the right to repair or replace any defective go away and then you can start generating your order. material after field inspection by our representative. It is very important that you use the correct dealer ID number. That ID number will ensure that all your or- 3) All replacement parts will be invoiced to the ders will be shipped and billed to the correct dealer. It dealer at our regular rate until the defective part is re- also provides a seamless transition from point of order turned (identified by RGA number) for credit. Parts being placed, to production, shipping and invoicing. returned with no RGA number will not be credited. 4) RGA returns can be sent back on our trucks to save the cost of freight charges and to limit the chanc- *** Hi-Lo Industries, Inc. reserves the right to change es of further damage to the merchandise. Our drivers the product specifications at any time without prior no- will not pick up any product that does not have an at- tification.*** tached RGA number that has been assigned by the factory. (Paperwork must be attached to each item.) 5) Should you choose to ship RGA parts via FEDEX ground, freight charges will be credited upon determination that the part is in fact a warranted item. Any damage incurred in this shipment will null and void warranty, and becomes the responsibility of the dealer to file freight claims. 6) Because of the time lapse that may occur be- fore our truck returns to your facility, RGA invoices will not be considered for collection for 60 days. This should allow the dealer ample time to return the mer- chandise in question. After 60 days the RGA will lapse and the invoiced amount should be paid. 7) If a dealer receives a shipment via FEDEX and there is visible damage to the package, the dealer should refuse the package and call our customer ser- vice department. If the dealer accepts the package and realizes once the package is opened that the mer- chandise is damaged, call our customer service de- partment. **E-catalog registration procedures ** The first time that you generate a new order after the initial installation of the program you will be asked to register. 1. Place a bulls eye next to “generate an order” 2. Bottom right hand click on “Next” 3. At that time a window will pop up asking you to register the program. Click on “OK” 4. A blank registration form will pop up. Fill this form out in its entirety. The 2 most important things are: 5. To fill in the dealer ID number in the box to the right of the dealer name window. If you don’t know American Value 8 Revised 2/28/2016

Introduction Hi-Lo Industries And Dealer Agreement General What our dealers can expect from us: Hi-Lo Industries is committed to supplying innovative wide-ranging flexible product lines that give our dealers an edge in their local markets. Hi-Lo continues to build long-term business relationships with our dealers by:  Providing information systems that keep our dealers current and up to date on all aspects of our business.  Producing high-quality cabinets  Shipping on-time and complete  Basing our future business decisions on maintaining our position in the marketplace while providing you the maximum service and product achievable under those constraints.  Providing a well trained and knowledgeable staff to help us meet your needs in all aspects of your day-to-day business. We promise to take these commitments seriously and strive to do each of these to the highest level of our capabil- ities. What we expect from our dealers: As with any relationship a good understanding up front usually heads off many of the problems that can occur later. The guidelines listed below are just good business practices and will mutually benefit both dealer and manufacturer in the long term. 1. Current displays and sales aids: Our product line changes as old trends die and new ones emerge. Wood mellows and ages to a point it no longer represents the true tones of a newly produced kitchen. We recommend replacing color samples every two years, and displays every three to five years. We ask that you review your samples and destroy anything that exceeds 24 months in age to assure your sales staff is not selling from sam- ples that no longer represent our products, thus voiding any commitment on our part concerning color or wood tone. 2. Train your customer and your sales staff: Because there are so many choices offered by Hi-Lo Industries , it is easy to overlook providing vital information to your customer at the proper time. Hi-Lo’s electronic catalog is designed to prompt you of any issues that we think should be covered with your customer, but ultimately you must be the one to follow through and make sure that your customer fully understands what they are buying. Because we realize that a knowledgeable sales staff is essential for you to represent our products, our sales representa- tives are well trained and willing to provide this service to you at your request. 3. Be thorough and complete: We have to begin with the correct information to produce the correct order. Take the time to review your work before submitting to assure it meets your customer’s expectations and desires and can be processed by Hi-Lo with minimal questions. Taking this time upfront lowers the number of order changes, quick ships and reorders after delivery, assuring a pleasant experience for all involved. Be there to receive order: When the order arrives, it is the dealer’s responsibility to check it over right away. Problems must be reported quickly, and incorrect or defective products should never be installed. Call your rep or Hi-Lo customer service before performing any warranty repairs you expect to have credited by Hi-Lo. All returns or credits require prior approval. Provide service after delivery:  When there is minor shipping damage that can be serviced, please do so.  Review work after installation to assure that job is properly installed and adjusted to meet the customer’s ex- pectations.  Handle all customer concerns immediately. The longer these go unattended the more unreasonable the cus- tomer will become. Incidental expenses such installation of replacement parts, trips to job sites, minor touch up etc. should be consid- ered in your original bid and are a real and expected cost to retail kitchen businesses. American Value 9 Revised 03/09/2012

Sales Aids Sales Aids BRO BROCHURES SHOWROOM DISPLAYS: DISCOUNTS AVAILABLE ON DISPLAY ORDERS SALES REP MUST SUBMIT A DISPLAY DISCOUNT FORM FOR EFFECTIVE DISCOUNT. DISCOUNTS MUST BE SUBMITTED PRIOR TO OR AT THE TIME THE DISPLAY ORDER IS SUBMITTED. Promotional discounts are not available with a display discount. American Value Sample Kit VLSK Items Included Hawthorne Berkshire Wakefield Claybourne Buxton Teton Classic Dover Molding Chain 2 Catalogs Brochures American Value 10 Revised 2/28/2016

Sales Aids American Value Kiosk General AVKSK Features include: A Hawthorne style base cabinet that shows all the standard construc- tion features that make American Value so desirable. We showcase this cabinet with raised panel decorative ends and 2 adjustable solid wood rollout trays to showcase one of the many accessories available in the American Value line. The upper section not only displays the complete door offering, but graphically features the benefits of the line. The Kiosk is easy to assemble, and is designed to be free stand- ing, but since the back of the cabinet is not finished, it works best against a wall. Great for home shows, or showrooms when space is an issue. Includes molding chain, 2 price books and 1 package of brochures. Overall display dimensions: 37.5” W x 82” T x 24 D Note: Does not come with knobs Sample door and drawers fronts pictured are included. American Value Kiosk Wall Mount Door Display AVWMD Great for dealers who already have an American Value display with matching construction, but need to show the product selection in an organized highly visible fashion. Designed to be adaptable to any future product changes. Includes molding chain, 2 price books and 1 package of brochures. Overall display dimensions: 35.75” W x 47.5” T Sample doors and drawer fronts pictured are included. American Value 11 Revised 2/28/2016

Sales Aids American Value Mini-Base Cabinet Features include: Framed Mini box - Plywood construction . Finished end, left. VMBFR E-catalog code: VMBFR - Framed American Value Mini-Base Available In Hawthorne Style Only Dovetailed Drawer Finished End 5 Piece Mitered Drawer Front Mitered Door Raised Panel End Sample Door And Drawer SADRF Door and Drawer Front are doweled together. There is no Face Frame American Value 12 Revised 2/28/2016

Style Choices Note: Door color and wood General species have been pre- selected. Name Species Color Name Species Color Chestnut Vintage Cotton Hawthorne Cherry Berkshire Hardwood Liquorice Glaze Caramel Glaze Name Species Color Name Species Color Toffee Butterscotch Wakefield Maple Claybourne Maple Liquorice Glaze Mocha Glaze American Value 13 Revised 09/13/2012

Style Choices Note: Door color and wood species have been pre- selected. Name Species Color Name Species Color Rustic Buxton Harvest Maple Dunn Alder Classic Name Species Color Name Species Color Rustic Dover Maple Harbor Mist Teton Harvest Alder American Value 14 Revised 10/21/2012

Construction Sides Sides of cabinets are ½” hardwood veneer plywood. Secured to the face frame with a rabbet and dado combination joint, glued and nailed. Finished ends are available, but not included unless noted. See accessories for finished end options. General Backs Backs are constructed using 1/2' hardwood veneer plywood attached to the sides with rabbet joints. This eliminates the need for unsightly hang rails. Floors Floors are constructed using 1/2' hardwood veneer plywood dadoed and locked into the face frame, sides and back with glue and nails. Shelves Shelves are constructed using 3/4' plywood. Shelves are fully adjustable. On wall cabinets over 27” wide shelves are supported in back by shelf clips to eliminate sagging. Drawers Drawers boxes are constructed with 5/8” solid hardwood sides, back and front, dadoed to lock in a 1/4” plywood bottom. Drawer slides Drawer slides come standard with full extension soft close undermount hardware with a lifetime guar- antee. Doors See style section for specifics. Hinges Fully concealed European style hinges. All hardware carries a lifetime warranty to the original pur- chaser. All cabinets come standard with full-overlay soft close hinges. Interior Interior is natural hardwood veneer, finished clear, with conversion varnish. Exterior Exterior color determined by style choice. Wood Species Available in Maple, Cherry or Rustic Alder. American Value 15 Revised 07/11/2012

Tall Cabinets 3' mullion Right side reveal Top reveal 1 1 4 1 1 1 4 4 1 4 Standard gap Left side Doors over 48” high between reveal will be constructed doors/doors 1 as 2 doors dowelled doors/drawers 2 together. with cabinets that have a 3' mullion 84 1 1 4 'gap' between 'gap' between 4 drawerfronts drawerfronts and top doors 1 1 4 4 'gap' between drawerfronts 1 Bottom 2 reveal American Value 16 Revised 03/20/2012

Tall Cabinets 3' mullion General Top reveal 1 1 4 1 1 1 4 4 Right side 1 reveal 4 1 2 84 Left side reveal 1 4 Gap between left doors and Gap between right doors top doors and bottom doors 1 2 Doors over 48” high will be constructed as 2 doors dowelled together. Bottom 1 reveal 2 American Value 17 Revised 03/20/2012

Tall Cabinets 3' mullion Top reveal Top reveal 1 1 4 1 1 1 4 3 4 1 1 4 1 1 4 16 1 4 Right side reveal 1 1 1 4 8 4 84 Left side 16 1 2 reveal Gap between 16 1/4 top doors 16 1/2 Right side reveal 1 Left side 4 reveal 1 4 Doors over 48” high will be constructed as 2 doors dowelled Bottom together. reveal 1 2 CAUTION: When installing any tall cabinet with doors at the top next to a Utility cabinet, the top doors will not “match”. Due to the aggressiveness of our full overlay application, because the utility cabi- net has cross rail that both the upper and lower doors overlay, we cannot extend the top doors down an additional 1/4” to match up the doors (see illustration above). The bottom doors on the utility cabinet only have a 1/4” overlay. To decrease the overlay any further would be taking a chance of exposing the cross rail altogether and creating a gap. American Value 18 Revised 04/26/2012

Wall And Base Cabinets Reveal at General the top of doors 3' mullion 1 1 4 1 4 1 1 Right side Left side 4 reveal 1 reveal 4 1 Standard gap between 2 doors/doors doors/drawers with cabinets that have a 3' mullion 1 4 Reveal at the bottom Reveal at the top of drawers/doors Right side reveal Left side 1 1 reveal 4 4 1 Standard gap 4 1 between 4 doors/doors doors/drawers 1 4 Reveal at the bottom 1 2 American Value 19 Revised 03/22/2012

This Page Intentionally Blank American Value 20

Modifications Dimension Modification You can modify the cabinet width, height or depth in 1/16 inch increments. The maximum width for a cabinet is the widest size listed for that cabinet in this catalog. The maximum height for a cabinet is the tallest size listed for that cabinet in this catalog. The maximum depth for a cabinet is the deepest size listed for that cabinet in this catalog, with the exception that a 12 inch deep wall cabinet can be modified up to 15 inches deep. The minimum width of cabinets (unless otherwise noted) is 9 inches. There is a dimensional modification charge that will be added to the list price of next largest cabinet size. For example, if you want a 24.5 inch wide cabinet you start with a B27 and reduce the width. You will be charged for the B27 + the dimensional modification charge. Modifications American Value M 1 Revised 2/28/2016

Modifications Toe Kick Modifications Mod9 - Flush Toe Kick Flush toe kick. This modification re- Mod moves the recessed toe kick from your cabinet. 9 24 This makes the bottom rail of your cabi- net 5” as illustrated to the right. 4 1 2 34 1 2 22 5 Mod9A - Add Toe Kick Toe Kick added to the left, right or back of a base, vanity or tall cabinet. Mod Adds a standard 3-1/2” tall, 3” deep toe 9A kick to your selected area. 24 Please specify left, right or back. A 4 1 $48.00 charge is applied for each toe 2 kick added. Note: Toe Kick 3 sides or more. Toe 34 1 2 base ships loose. 22 3 1 2 3 Illustration shows Toe kick left added. Mod9N - No Toe Notch No toe notch for DEP’s, UEP’s & VEP’s Mod etc. Removes the standard toe notch. 9N 1 1 2 34 1 2 American Value M 2 Revised 2/28/2016

Modifications Finished End Modifications Mod13L - Ship Finished End Loose Ship finished end loose Mod Finished end shipped loose 13L Face Frame Modifications Modifications Mod10V - Fill Blind Void Mod Fill blind void with 3/4” plywood. The wood species and color of the plywood is matched to the cabinet. 10V Before After 5 1 2 5 1 2 Grain exaggerated for illustration purposes American Value M 3 Revised 2/28/2016

Modifications Face Frame Modifications Mod7 - Face Frame & Door only Face frame and door only. This modification re- Mod moves the face frame and door/drawer front from your selected cabinet and ships that assembly 36 4 1 7 without the cabinet box. There is a reduction in 2 price for this modification. Illustration at right shows a FF&D for a B36. For Example - Assuming the price adjustment in the price list is 34%, you would deduct 34% from the list price of your cabinet. 22 If the list price of a cabinet is $670, you would subtract $227.80 (34% of $670), making the list 31 price $443.00, rounded up, for that FF&D Mod25D - Remove Center Mullion Mod Before After 25D Used to remove the center mullion from the cabinet. As illustrated at top, when you use the Mod 25D it only removes the mullion from one area. To remove the mullion from the top and bottom the modification needs to be applied for every mullion removed. Caution: Removing the mullion increases the door sizes. This may cause the doors to become too large for warranty purposes. Check door section for sizing limitations. American Value M 4 Revised 2/28/2016

Modifications Door Modifications Mod19 - Add Door After Mod Before 19 Used to add a door to a cabinet to change a single hung door cabinet to butt doors as illustrated at left. This modification may not be possible for certain cabinet sizes due to door size limitations. For example, if it would make the door narrower than our minimum door size.. Single hung Butt doors Modifications Mod19D - Remove Door Before After Mod 19D Used to remove the door from a cabi- net to change a butt door cabinet to a single hung cabinet. Depending on the size of cabinet, re- moving one door from the cabinet may increase the size of the other door beyond warranty size. Butt doors Single hung Mod19FD - Add Single Lite Prepped For Glass Door Used to add a single lite prepped for glass door to a cabinet. See “Also Available” note on Style Choic- Mod es page to determine if modification is applicable. 19FD American Value M 5 Revised 2/28/2016

Modifications Door Modifications Mod19SL - Ship Door Loose Ship door loose. Mod No prep no hinge. 19SL American Value M 6 Revised 2/28/2016

Modifications Drawer Modifications Mod21S - Scoop Drawer Scooping the drawer Mod changes the drawer Before After sides to the next small- 21S er size, mainly for ap- pliance applications. Drawer box sizes: 2-1/4” 3-1/4” 5-1/4” 2 1 4 8-1/4” Modifications American Value M 7 Revised 2/28/2016

Modifications Shelf Modifications Mod26A - Add 1/2 Depth Shelf Used to add additional 1/2 Before Mod depth shelves to cabinet. After 26A Mod26C - Change 1/2 Depth Shelf to Full Depth Used to change a stand- Before Mod ard 1/2 depth shelf to a After full depth shelf, as illus- 26C trated at right. Mod26D - Remove 1/2 Depth Shelf Used to remove the 1/2 Before Mod depth shelf. After 26D Note: If cabinet has multi- ple shelves please specify number of shelves to re- move. American Value M 8 Revised 2/28/2016

Modifications Shelf Modifications Mod27 - Add Full Depth Shelf Used to add a full Mod depth shelf. Before After 27 1 1 2 2 3 3 4 Mod27D - Remove Full Depth Shelf Modifications Used to remove a Before After Mod full depth shelf. 27D If cabinet has mul- tiple shelves please specify number of shelves to remove. American Value M 9 Revised 2/28/2016

Modifications Interior Modifications Mod29 - Install A Vertical Partition In A Tall Cabinet Before After Mod 29 Used to add a verti- cal partition in a tall cabinet. The illustration at left shows the parti- tion installed cen- tered in cabinet . Please specify lo- cation of partition. Location is speci- fied from the inside of the face frame not the inside of end panel. Partition is 3/4” Partition dadoed into thick material. floor panel. When partition is added the shelves are removed. Use Mod 26A to reinstall shelves when using the E-catalog program to per- form this modification Mod31 - Stained Interior Mod31 is used to paint After or stain the interior and Before Mod shelves of any cabinet to match the face frame. 31 For illustration pur- poses the shelves were not stained to show contrasting differences. American Value M 10 Revised 2/28/2016

Wall Cabinets 12” Tall 12” Deep 15” Tall 12” Deep 12 12 12 15 To make this cabinet into a Cabinet Cabinet To make this cabinet into a peninsula cabinet, add a “P” to peninsula cabinet, add a “P” the nomenclature. See price W912(1) W915(1) to the nomenclature. See list for pricing. W1212(1) W1215(1) price list for pricing. W1512(1) W1515(1) For example: WP2718 For example: WP2721 W1812(1) W1815(1) (1) Single hung specify left or right hinge. W2112(1) W2115(1) (1) Single hung specify left W2412(1) W2415(1) or right hinge. (2) 2 door Butt doors W2712(2) W2715(2) (2) 2 door Butt doors (3) 2 door w/mullion. W3015(2) W3012(2) (3) 2 door w/mullion. W3312(2) W3315(2) W3612(2) W3615(2) W3912(3) W3915(3) W4212(3) W4215(3) W4512(3) W4515(3) Wall Cabinets W4812(3) W4815(3) American Value W1 Revised 2/28/2016

Wall Cabinets 18” Tall 12” Deep 21” Tall 12” Deep 12 12 18 21 Cabinet Cabinet Cabinet Cabinet W918(1) W3018(2) W921(1) W3021(2) W1218(1) W3318(2) W1221(1) W3321(2) W1518(1) W3618(2) W1521(1) W3621(2) W1818(1) W3918(3) W1821(1) W3921(3) W2118(1) W4218(3) W2121(1) W4221(3) W2418(1) W4518(3) W2421(1) W4521(3) W2718(2) W4818(3) W2721(2) W4821(3) To make this cabinet into a pen- (1) Single hung specify To make this cabinet into a pen- (1) Single hung specify insula cabinet, add a “P” to the left or right hinge. insula cabinet, add a “P” to the left or right hinge. nomenclature. See price list for nomenclature. See price list for pricing. (2) 2 door Butt doors pricing. (2) 2 door Butt doors For example: WP2721 (3) 2 door w/mullion. For example: WP2721 (3) 2 door w/mullion. 18” Tall 24” Deep 20” Tall 24” Deep 24 24 18 20 (1) Single hung specify left or Cabinet Cabinet (1) Single hung specify left right hinge. or right hinge. RW3018(2) RW3020(2) (2) 2 door Butt doors RW3318(2) RW3320(2) (2) 2 door Butt doors (3) 2 door w/mullion. RW3618(2) RW3620(2) (3) 2 door w/mullion. RW3918(2) RW3920(2) RW4218(2) RW4220(2) RW4518(3) RW4520(3) RW4818(3) RW4820(3) American Value W2 Revised 2/28/2016

Wall Cabinets 24” Tall 12” Deep 27” Tall 12” Deep 12 12 24 27 Cabinet Cabinet Cabinet Cabinet W924(1) W3024(2) W927(1) W3027(2) W1224(1) W3324(2) W1227(1) W3327(2) W1524(1) W3624(2) W1527(1) W3627(2) W1824(1) W3924(3) W1827(1) W3927(3) W2124(1) W4224(3) W2127(1) W4227(3) W2424(1) W4524(3) W2427(1) W4527(3) W4824(3) W2724(2) W2727(2) W4827(3) To make this cabinet into a peninsula cabinet, add a “P” to the nomenclature. See price list for pricing. WP2724 / 27 Single hung specify left or right hinge. (2) 2 door Butt doors (3) 2 door w/mullion. 24” Tall 24” Deep 27” Tall 24” Deep Wall Cabinets 24 24 27 24 (1) Single hung specify left or Cabinet Cabinet (1) Single hung specify left right hinge. or right hinge. RW3024(2) RW3027(2) (2) 2 door Butt doors RW3324(2) RW3327(2) (2) 2 door Butt doors (3) 2 door w/mullion. RW3624(2) RW3627(2) (3) 2 door w/mullion. RW3924(2) RW3927(2) RW4224(2) RW4227(2) RW4524(3) RW4527(3) RW4824(3) RW4827(3) American Value W3 Revised 2/28/2016

Wall Cabinets 30” Tall 12” Deep 33” Tall 12” Deep 12 12 30 33 To make this cabinet into a Cabinet Cabinet To make this cabinet into a peninsula cabinet, add a “P” to W933(1) peninsula cabinet, add a “P” the nomenclature. See price W930(1) to the nomenclature. See list for pricing. W1230(1) W1233(1) price list for pricing. W1530(1) W1533(1) For example: WP2730 For example: WP2733 W1830(1) W1833(1) (1) Single hung specify left or (1) Single hung specify left right hinge. W2130(1) W2133(1) or right hinge. W2430(1) W2433(1) (2) 2 door Butt doors (2) 2 door Butt doors W2730(2) W2733(2) (3) 2 door w/mullion. W3030(2) W3033(2) (3) 2 door w/mullion. W3330(2) W3333(2) W3630(2) W3633(2) W3930(3) W3933(3) W4230(3) W4233(3) W4530(3) W4533(3) W4830(3) W4833(3) American Value W4 Revised 2/28/2016

Wall Cabinets 36” Tall 12” Deep 39” Tall 12” Deep 12 12 36 39 To make this cabinet into a Cabinet Cabinet To make this cabinet into a peninsula cabinet, add a “P” to peninsula cabinet, add a “P” Wall Cabinets the nomenclature. See price W936(1) W939(1) to the nomenclature. See list for pricing. W1236(1) W1239(1) price list for pricing. W1536(1) W1539(1) For example: WP2736 For example: WP2739 W1836(1) W1839(1) (1) Single hung specify left or (1) Single hung specify left right hinge. W2136(1) W2139(1) or right hinge. W2436(1) W2439(1) (2) 2 door Butt doors (2) 2 door Butt doors W2736(2) W2739(2) (3) 2 door w/mullion. W3036(2) W3039(2) (3) 2 door w/mullion. W3336(2) W3339(2) W3636(2) W3639(2) W3936(3) W3939(3) W4236(3) W4239(3) W4536(3) W4539(3) W4836(3) W4839(3) American Value W5 Revised 2/28/2016

Wall Cabinets 42” Tall 12” Deep Wall Spice Rack 12” Deep 12 42 Cabinet Cabinet To make this cabinet into a W942(1) (1) Single hung specify left or WSPR1530(1) peninsula cabinet, add a “P” to W1242(1) right hinge. WSPR1830(1) the nomenclature. See price list for pricing. W1542(1) WSPR2130(1) W1842(1) For example: WP2742 W2142(1) WSPR1536(1) (1) Single hung specify left or W2442(1) WSPR1836(1) right hinge. W2742(2) WSPR2136(1) (2) 2 door Butt doors W3042(2) (3) 2 door w/mullion. W3342(2) WSPR1542(1) W3642(2) WSPR1842(1) W3942(3) WSPR2142(1) W4242(3) W4542(3) W4842(3) American Value W6 Revised 2/28/2016

Wall Cabinets Wall Angle Corner 12” Deep Wall Angle Corner 15” Deep Cabinet Cabinet 24 24 27 27 WAC30 WACF30 12 12 15 15 (a) (a) WAC36 WACF36 (a) (a) WAC39 36 WACF39 36 (a) (a) WAC42 WACF42 (b) (b) WAC48 WACF48 (b) * (b) 12 12 15 15 (a) - 2 shelves * - Has finished ends Includes finished ends below 30” cabinet height (b) - 3 shelves (a) - 2 shelves Specify left or right hinge. (b) - 3 shelves Standard Opening 14”. Specify left or right hinge Standard Opening 14” Note: No width or depth Note: No width or depth modifications allowed. modifications allowed. You may change the height. You may change the height. Wall Angle Lazy Susan 12” Deep Wall Angle Lazy Susan 15” Deep Cabinet Cabinet 24 24 24 27 27 Wall Cabinets WLS30 WLSF30 12 12 15 15 14 WLS36 WLSF36 WLS39 WLSF39 WLS42 WLSF42 WLS48 WLSF48 Comes with pole- mounted plastic 12 12 lazy susan. Comes with pole- mounted plastic 15 15 lazy susan. Specify left or right hinge. Note: No width or depth Standard Opening 14” modifications allowed. You may change the height. Specify left or right hinge. Note: No width or depth Standard Opening 14” modifications allowed. Includes finished ends. You may change the height. American Value W7 Revised 2/28/2016

Wall Cabinets Wall Angle Corner Peninsula 12” Deep Wall Angle Corner Peninsula 15” Deep Cabinet Cabinet 24 24 27 27 WAP30 WAPF30 12 12 15 15 (a) (a) WAP36 WAPF36 (a) (a) Adjustable shelf WAP42 Adjustable WAPF42 shelf 36 36 (b) (b) Adjustable Adjustable shelf shelf 15 12 12 15 Specify left or right hinge Specify left or right hinge Specify left or right peninsula (a) - 2 shelves (b) - 3 shelves (a) - 2 shelves (b) - 3 shelves Includes finished ends. Standard Opening 14” Specify left or right Note: No width or depth peninsula Note: No width or depth modifications allowed. modifications allowed. You may change the height. Standard Opening 14” You may change the height. Wall Angle Lazy Susan Peninsula 12” Deep Wall Angle Lazy Susan Peninsula 15” Deep Cabinet Cabinet 24 24 WLSP30 27 27 WLSPF30 12 12 (a) WLSP36 15 15 WLSPF36 WLSP42 (b) WLSPF42 (b) Includes full ht. Includes finished finished ends ends Comes with pole- Comes with pole- 15 15 mounted plastic 12 12 mounted plastic lazy susan. lazy susan. Specify left or right hinge Specify left or right hinge Specify left or right Note: No width or depth Specify left or right Note: No width or depth peninsula modifications allowed. peninsula modifications allowed. Standard Opening 14” You may change the height. You may change the height. Standard Opening 14” American Value W8 Revised 2/28/2016

Wall Cabinets Wall Angle Corner W/Appliance Door 12” Deep Wall Angle Corner W/Appliance Door 15” Deep Cabinet Cabinet 24 24 27 27 WACAGBD48 WACAGBDF48 12 12 15 15 (a) WACAGBD54 WACAGBDF54 WACAGBD60 (b) Includes finished WACAGBDF60 ends for butt door 48 (b) section only. Full 48 height FE’s ordered Includes finished separately. ends. 18 Lower doors have (a) - 2 shelves 18 (b) - 3 shelves / 1/8” offset for clear- 1 12 12 ance on countertops. 8 1 Note: No width or depth 8 modifications allowed. Note: No width or depth You may change the height. modifications allowed. You may change the height. Wall Lazy Susan W/Appliance Door 12” Deep Wall Lazy Susan W/Appliance Door 15” Deep Cabinet Cabinet 24 24 27 27 WLSAGBDF48 Wall Cabinets WLSAGBD48 (a) 12 12 (a) 15 15 WLSAGBDF54 WLSAGBD54 (b) (b) WLSAGBDF60 WLSAGBD60 (b) (b) Comes with pole- Includes finished mounted plastic lazy ends. susan. Lower doors have 1/8” offset for clear- ance on countertops. 18 Lower doors have 18 Comes with pole- 1/8” offset for clear- 1 mounted plastic lazy 8 ance on countertops. susan. 1 Note: No width or depth 8 modifications allowed. Note: No width or depth You may change the height. modifications allowed. You may change the height. American Value W9 Revised 2/28/2016

Wall Cabinets Wall Wine Rack 12” Deep Plate Rack 12” Deep 12 12 18 Cabinet Cabinet 16 1 2 PR1818 PR3618 PR2418 PR4218 PR3018 Removable 3/8” dowels for easy cleaning Includes finished interior 15 EZ Corner 12” Deep Cabinet (1) Single hung specify left or right hinge. WWR1830(1)(a) Cabinet 24 WWR2430(1)(a) (2) 2 door Butt Doors 24 12 EZ2430(a) WWR3030(2)(a) (3) 2 door w/mullion 12 12 12 EZ2436(a) WWR3630(2)(a) Includes finished interior EZ2442(b) WWR4230(3)(a) (a) no shelf 30 (b) 1 shelf WWR1836(1)(a) WWR2436(1)(a) WWR3036(2)(a) WWR3636(2)(a) WWR4236(3)(a) Specify left or right hinge. BLS style hinges are used. WWR1842(1)(b) Any EZ cabinet 36” in height or taller must be hinged separately. Specify which door opens first left or right. WWR2442(1)(b) (a) - 2 shelves WWR3042(2)(b) (b) - 3 shelves / Specify left or right hinge. WWR3642(2)(b) WWR4242(3)(b) American Value W10 Revised 2/28/2016

Wall Cabinets Wall Blind Corner 15” to 24” Tall 12” Deep Wall Blind Corner 30” Tall 12” Deep 12 1 13 2 12 1 13 2 5 1 2 5 1 2 30 24 To make this cabinet Cabinets Cabinets Cabinets To make this cabinet into into a peninsula cabi- (15” Tall) (18” Tall) (30” Tall) a peninsula cabinet, net, change the no- WBC2415(1) WBC2418(1) WBC2430(1) change the nomenclature menclature to read: to read: BCWPxxxx WBC2715(1) WBC2718(1) WBC2730(1) BCWPxxxx WBC3015(1) WBC3018(1) WBC3030(1) Wall Cabinets (1) Single hung spec- (1) Single hung specify ify left or right WBC3315(1) WBC3318(1) WBC3330(1) left or right hinge. hinge. WBC3615(1) WBC3618(1) WBC3630(1) (2) 2 door Butt doors WBC3915(2) WBC3918(2) WBC3930(2) (2) 2 door Butt doors WBC4215(2) WBC4218(2) WBC4230(2) 15” and 18” tall cabi- 30” tall cabinets come nets do not come with Cabinets Cabinets with one shelf. shelves. 21” and 24” tall cabinets come WBC2421(1) WBC2424(1) with one shelf. WBC2721(1) WBC2724(1) WBC3021(1) WBC3024(1) WBC3321(1) WBC3324(1) WBC3621(1) WBC3624(1) WBC3921(2) WBC3924(2) WBC4221(2) WBC4224(2) Caution: Blind corner cabinets must be pulled a Caution: Blind corner cabinets must be pulled a minimum of 1.5” to a maximum of 3”. Cabinet butting minimum of 1.5” to a maximum of 3”. Cabinet butting into blind must have filler equal to the amount of pull. into blind must have filler equal to the amount of pull. Specify blind left or right Blind left shown Use mod. Specify blind left or right Blind left shown Use mod. 10V to fill blind void. 10V to fill blind void. American Value W11 Revised 2/28/2016

Wall Cabinets Wall Blind Corner 33” and 36” Tall 12” Deep Wall Blind Corner 39” and 42” Tall 12” Deep 12 1 13 2 12 1 13 2 5 1 2 5 1 2 42 36 To make this cabinet into a Cabinets Cabinets Cabinets Cabinets To make this cabinet into a peninsula cabinet, change (33” Tall) (36” Tall) (49” Tall) (42” Tall) peninsula cabinet, change the nomenclature to read: WBC2433(1) WBC2436(1) WBC2439(1) WBC2442(1) the nomenclature to read: BCWPxxxx BCWxxxx WBC2733(1) WBC2736(1) WBC2739(1) WBC2742(1) (1) Single hung specify left WBC3036(1) WBC3039(1) WBC3042(1) (1) Single hung specify left or right hinge. WBC3033(1) or right hinge. WBC3333(1) WBC3336(1) WBC3339(1) WBC3342(1) (2) 2 door Butt doors WBC3633(1) WBC3636(1) WBC3639(1) WBC3642(1) (2) 2 door Butt doors WBC3933(2) WBC3936(2) WBC3939(2) WBC3942(2) WBC4233(2) WBC4236(2) WBC4239(2) WBC4242(2) 33” and 36” tall cabi- 39” tall cabinets in- nets come with one clude 2 shelves. 42” shelf. tall cabinets include 3 shelves. Caution: Blind corner cabinets must be pulled a Caution: Blind corner cabinets must be pulled a minimum of 1.5” to a maximum of 3”. Cabinet butting minimum of 1.5” to a maximum of 3”. Cabinet butting into blind must have filler equal to the amount of pull. into blind must have filler equal to the amount of pull. Specify blind left or right Blind left shown Use mod. Specify blind left or right Blind left shown Use mod. 10V to fill blind void. 10V to fill blind void. American Value W12 Revised 2/28/2016

Wall Cabinets Wall Appliance Door 48” 54” 60” Tall 12” Deep Cabinet Cabinet Cabinet 12 WAD1248 WAD1254 WAD1260 (1) (1) (1) WAD1548 WAD1554 WAD1560 (1) (1) (1) WAD1848 WAD1854 WAD1860 (1) (1) (1) WAD2148 WAD2154 WAD2160 (1) (1) (1) WAD2448 WAD2454 WAD2460 (1) (1) (1) WAD2748 WAD2754 WAD2760 (2) (2) (2) WAD3048 WAD3054 WAD3060 (2) (2) (2) WAD3348 WAD3354 WAD3360 (2) (2) (2) WAD3648 WAD3654 WAD3660 18 (2) (2) (2) WAD3948 WAD3954 WAD3960 (3) (3) (3) 1 WAD4248 WAD4254 WAD4260 8 (3) (3) (3) Lower doors have 1/8” offset for clearance on counter- Does not include finished (2) 2 door Butt Doors Wall Cabinets tops. ends. (3) door w/mullions. (1) Single hung specify left American Value W13 Revised 2/28/2016

Wall Cabinets Wall 1 Drawer 48” 54” 60” Tall 12” Deep Wall 3 Drawer 48” 54” 60” Tall 12” Deep 12 12 19 1 2 4 1 2 4 1 2 4 1 2 4 1 2 Cabinet Cabinet Cabinet Cabinet Cabinet Cabinet W1D1248 (1) W1D1254 W1D1260 WD1248 WD1254 WD1260 W1D1548 (1) (1) (1) (1) (1) (1) W1D1554 W1D15460 WD1548 WD1554 WD1560 W1D1848 (1) (1) (1) (1) (1) (1) W1D1854 W1D1860 WD1848 WD1854 WD1860 W1D2148 (1) (1) (1) (1) (1) (1) W1D2154 W1D2160 WD2148 WD2154 WD2160 W1D2448 (1) (1) (1) (1) (1) (1) W1D2454 W1D2460 WD2448 WD2454 WD2460 W1D2748 (1) (1) (1) (1) (1) (2) W1D2754 W1D2760 WD2748 WD2754 WD2760 W1D3048 (2) (2) (2) (2) (2) (2) W1D3054 W1D3060 WD3048 WD3054 WD3060 W1D3348 (2) (2) (2) (2) (2) (2) W1D3354 W1D3360 WD3348 WD3354 WD3360 (2) (2) (2) (2) (2) Does not include finished ends. (2) 2 door Butt Does not include finished ends. (2) 2 door Butt Doors Doors Drawers have 7/8 extension slide Drawers have 7/8 extension slide (1) Single hung specify left or right (1) Single hung specify left or right hinge. hinge. American Value W14 Revised 2/28/2018

Wall Cabinets Appliance Garage 12” Deep Microwave Wall 30” 36” 42” 48” Tall 21” Deep (1) - no shelf upper wall 24 24 section. (2) 1 shelf 21 All cabinets are 2 door Butt Doors. 12 12 Includes finished 18 interior. 16 1 2 For 18” deep cabinets add “E”. For example: MW2739E Cabinet Door has 1/8” offset for clearance on countertops. Cabinet Cabinet AGBD MW2730(1) MW2739(2) Note: No width or depth Includes finished ends modifications allowed. MW3030(1) MW3039(2) You may change the MW2733(1) MW2742(2) height. MW3033(1) MW3042(2) MW2736(1) MW2748(2) MW3036(1) MW3048(2) Wall Range Rood Cabinets W/Spice Pullout Wall Cabinets 9 21 Above illustration shows a fully assembled range hood. To build your own range hood see page W16 30 Specify left or right hinge. Cabinet RHWCSP960 Finished ends standard. 12 RHWCSP972 RHWCSP984 American Value W15 Revised 2/28/2016

Wall Cabinets How To Order Range Hood Using The Wall Range Hood Cabinets 54 Standard BB3 9 21 42 9 21 72 30 72 12 54 For a raised panel look 30 Standard order loose doors with BB3 matching overlay and 12 attach to front BB3. 42 To order range hood shown on page W15 and above Follow Cabinet Upper section ht. these instructions: RHWCSP960 30 1. Determine size of the range hood wall cabinet that will be RHWCSP972 42 needed. RHWCSP984 54 2. From the chart shown at right determine the upper cabinet height. 3. Order your bar back to the upper cabinets specified height and to your desire length. 4. Repeat same process to determine and order your back 3/4” plywood material. Liners and vent system not supplied. That’s it, that simple For example to order range hood shown above we would need **Please check your local building code before placing the following materials: order. Range hoods are subject to local building codes. It is your responsibility to ensure that the range hoods 1. Two range hood wall cabinets: RHWCSP972 meet your local code** 2. Two BB3 (3/4” thick plywood material) 42” x 54” American Value W16 Revised 12/13/2013

Wall Cabinets Straight Range Hood Illustration at Cabinet left shows RHST48. RHST36 RHST42 RHST48 Range hood includes liner. **Range hoods are subject to local building codes. It is your responsibil- ity to ensure that the range hoods meet your local code. Please check before you order.** Range Hood Chimney Illustration at Cabinet left shows RHCH36 RHCH48. RHCH42 RHCH48 Wall Cabinets Range Hood Ventilator Cabinet RHV2 (250cfm) RHV3 (390cfm) RHV5 (500cfm) Above illustration shows a fully assembled range hood, RHST with RHCH. American Value W17 Revised 2/28/2016

Wall Cabinets Wall Finished End Acc. WFE 27 End panel Specify left or right 12 Finished end 1/2 1/4 3/4 Finished ends are 1/16 made with plywood that has an MDF core. Reveal past Face Frame 21 face frame Wall Raised End Panel - Framed Acc. Loose RPEW Installed on Cab RPEW Specify Right/Left End panel installation, installed at factory. RPEW RPEW increases 1/2 width of cabinet 3 3/4 by ' . RPE set back 1/16” 4 from face frame. 3/4 Face Frame 24' 24 3/4' Chrome Stemware Racks (Subject to Availability) Width 4” Acc. 11” 16” & 18” 4” Depth 11”, 16” & 18” SWC11 Height 1” SWC16 SWC18 Inner dimension for stemware: 3- 1/2” Shipped loose American Value W18 Revised 2/28/2016

Wall Cabinets Wall Cabinet With Door Mounted Pull Out Spice Wall Cabinet With Door Mounted Pull Out Spice Rack 30” Tall Rack 36” Tall Cabinet Cabinet 9 9 WWSR930 WWSR936 12 12 WWSR1236 WWSR1230 Size modifications are not Size modifications are not allowed on the spice pullout allowed on the spice pullout cabinets. cabinets. 36 Wooden pull-outs with Wooden pull-outs with chrome rails feature “tri- 30 chrome rails feature “tri- slides” for complete stability slides” for complete stability and easy installation. and easy installation. Full extension is standard. Full extension is standard. Door mounted Only Door mounted Only Spice rack is 30” tall. See picture at left Wall Cabinet With Door Mounted Pull Out Spice Angle Wall 12” Deep - Framed & Frameless Rack 42” Tall Cabinet 12 Wall Cabinets 9 12 Note: No WWSR942 12 width or WWSR1242 depth modi- fications Size modifications are not allowed. You allowed on the spice pullout may change cabinets. the height. Wooden pull-outs with 42 chrome rails feature “tri- slides” for complete stability and easy installation. Full extension is standard. Door mounted Only Spice rack is 30” tall. Specify Left or Right Cabinet AW30 Left shown AW36 AW42 American Value W19 Revised 2/28/2016

Wall Cabinets Wall Filler Spice Rack 30” Tall Cabinet WFSR330 WFSR630 WFSR’s are designed to be installed between the stiles of the adjoining cabinets to resemble a filler piece between 2 30 cabinets. Cabinet comes with no end panels. It is open on the left and right. Cabinet cannot be modified in width, height or depth. To see cabinets installed go to the dealer section of our web site. Spice rack comes with full extension ball bearing guides. Some form of handle, not supplied, will need to be applied to pullout spice rack. Cabinet is a true 3” or 6” width. Filler included with unit Wall Filler Spice Rack 36” Tall Cabinet WFSR336 WFSR636 WFSR’s are designed to be installed between the stiles of the adjoining cabinets to resemble a filler piece between 2 36 cabinets. Cabinet comes with no end panels. It is open on the left and right. Cabinet cannot be modified in width, height or depth. To see cabinets installed go to the dealer section of our web site. Spice rack comes with full extension ball bearing guides. Some form of handle, not supplied, will need to be applied to pullout spice rack. Cabinet is a true 3” or 6” width. Filler included with unit Wall Filler Spice Rack 42” Tall Cabinet WFSR342 WFSR642 WFSR’s are designed to be installed between the stiles of the adjoining cabinets to resemble a filler piece between 2 42 cabinets. Cabinet comes with no end panels. It is open on the left and right. Cabinet cannot be modified in width, height or depth. To see cabinets installed go to the dealer section of our web site. Spice rack comes with full extension ball bearing guides. Some form of handle, not supplied, will need to be applied to pullout spice rack. Cabinet is a true 3” or 6” width. Filler included with unit American Value W20 Revised 2/28/2016