Two-Striper_Shoulder-Prep_links

(Click on any Red Reorder Number to place order) Shoulder Prep/Butt-Joint Margin • Choose flat-end tapered or flat-end cylindrical diamonds to create shoulder preparations with a 90˚ margin “L” “L” S S 1.5mm 1.5mm longer longer shank shank Flat-End Taper 700.5 700.6 700.8 700.9 700.11 701.5 701.7 L701.7 701.9 L701.9 702.8 703.8 703.9 703.10 704.9 708.3 Coarse Medium Fine Very Fine P71-4446 Minor/Major Diameter P71-4418 P71-4422 P71-4432 P71-4448 P71-4420 P71-4424 P71-4434 0.6 / 1.1 0.7 / 1.2 0.6 / 1.8 0.6 / 1.4 0.7 / 1.8 0.8 / 1.2 1.1 / 1.8 1.1 / 1.8 0.9 / 1.8 0.9 / 1.8 0.9 / 1.4 1.2 / 1.8 1.1 / 1.8 1.1 / 1.8 1.3 / 1.8 1.3 / 2.1 Flat-End Taper 708.4 721.6 721.8 721.10 722.6 722.8 722.10 723.4 723.6 723.8 723.10 724.8 724.10 725.10 726.10 727.10 Coarse Fine P71-4484 Minor/Major Diameter P71-4458 P71-4466 P71-4472 P71-4482 1.3 / 2.0 0.8 / 1.1 0.8 / 1.2 0.8 / 1.3 1.0 / 1.4 1.0 / 1.5 1.0 / 1.6 1.5 / 2.0 1.3 / 1.6 1.3 / 1.7 1.3 / 1.8 1.5 / 2.0 1.5 / 2.1 0.9 / 1.8 1.1 / 2.0 1.4 / 2.3 Flat-End Taper 798.10 Flat-End Cylinder 513.4 513.5 514.3 514.4 514.5 514.7 515.5 515.7 515.8 516.7 520.4 Coarse Coarse Fine P71-4486 Medium P71-4712 P71-4488 Fine Minor/Major Diameter 0.5 / 1.5 Minor/Major Diameter P71-4690 P71-4696 P71-4700 P71-4706 P71-4708 P71-4714 1.0 1.0 1.1 1.1 1.1 1.1 1.2 1.2 1.3 1.6 1.4 S TS2000 2000.7 2000.8 2000.9 2000.10 2001.7 2001.8 2001.9 2001.10 2002.7 2002.8 2002.9 2002.10 Flat-End Taper P71-8255 0.9 / 1.4 0.9 / 1.4 0.9 / 1.4 0.9 / 1.4 1.1 / 1.6 1.1 / 1.6 1.1 / 1.6 1.1 / 1.6 1.3 / 1.8 1.3 / 1.8 1.3 / 1.8 1.3 / 1.8 Coarse Minor/Major Diameter TS2000 2013.7 2013.8 2013.10 Flat-End Cylinder P71-8450 Coarse 1.5 1.5 1.5 Minor/Major Diameter S Available as a short shank diamond. (Click on any Red Reorder Number to place order)

(Click on any Red Reorder Number to place order) KR Modified Shoulder Prep • Creates a margin with rounded internal angles • Flat-end tapered or parallel diamond instruments featuring a rounded (beveled) edge Modified Shoulder KR Cylinder 515.6 521.4 521.6 TS2000 Modified Coarse P71-5804 Shoulder Fine Minor/Major Diameter P71-5808 KR Cylinder 2013.8KR 1.2 1.4 1.4 Coarse P71-4865 Minor/Major Diameter 1.6 837KRT-016 Modified Modified Shoulder Shoulder TS2000 KR Taper 703.8 KR 708.4 KR 712.3 KR 722.8 KR 723.6 KR KR Taper 2001.8KR Coarse Fine P71-4863 Coarse P71-5810 P71-4864 Minor/Major Diameter 1.2 / 1.8 1.3 / 2.0 2.0 / 2.2 1.0 / 1.5 1.0 / 1.5 Minor/Major Diameter 1.0/1.6 847KRT-016 Bevel Shoulder Prep TS2000 2016.8 2016.10 Bevel-End • Recommended for porcelain-fused-to-metal Cylinder P71-8490 or cast gold crowns 1.4 1.8 Coarse • Establish a 45˚ - 60˚ angle Minor/Major Diameter • Place bevel finish line Bevel-End 244.10 248.8 250.8 250.9 250.11 251.8 255.8 Flame 290.2 Cylinder P71-4752 Coarse Coarse Medium Fine Medium P71-4348 Minor/Major Diameter P71-4742 P71-4213 P71-4746 P71-4750 P71-4754 Fine 0.5 / 1.3 0.4 / 1.1 0.4 / 1.2 0.4 / 1.2 0.4 / 1.2 0.4 / 1.2 0.4 / 1.8 Minor/Major Diameter 1.6 (Click on any Red Reorder Number to place order)