Our series of high-quality Regula Handheld Glass Lens Magnifiers are provided with the finest optically ground ophthalmic glass lenses. The chrome-plated brass frames hold the lenses in the center of the frames to prevent the lenses from being scratched when the magnifiers are placed on hard or rough surfaces.
This fixed-focus 5X Folding Fingerprint Magnifier has a folding metal stand and two optically ground and polished glass lenses. This magnifier is provided in a leatherette protective case which allows you to use it in the field as well as the lab.
EXpress Order System, Inc. folding magnifier (linen tester) with light
Camel Hair Brushes are excellent for field or laboratory processing. The gentle touch of this brush is ideal for general processing and fine tuning of fragile latent prints. Quality natural hair bristles are combined with a contoured wooden handle. Packaged in clear plastic storage tubes
Fiber/Filament Brush Our brushes are the finest fiberglass latent print powder brushes available anywhere. Both the 7.5” long and 6” long Whisper™ Brushes contain thousands of ultra fine and ultra soft fiberglass filaments which pick up and hold fingerprint powder. The filaments are permanently affixed to the brush handle and do not fall out. Features: • Filament length - 2\" • Handle length - 5.5\" long for the 7.5\" brush, 4\" long for the 6\" brush • Lightweight - 0.7 oz. for the 7.5\" brush, 0.5 oz. for the 6\" brush • Excellent balance • Fine Quality - Made of thousands of ultra fine and ultra soft fiberglass filaments • Always Soft - The tip of the fiberglass filaments becomes even softer with use • Protective Tube - Includes a clear plastic tube to protect the fiberglass filaments when the brush is not in use
This two-in-one, fixed-focus Fingerprint Magnifier changes from 3.5X to 7X simply by lowering the smaller lens into place. The 2.5” (65 mm) diameter and the 1” (25 mm) diameter lenses are optically ground and polished glass, providing uniform magnification, brightness, contrast, and color without significant geometric distortion.
Our Inking Slabs are available in two different sizes and in either polished stainless steel or .25” thick glass. The stainless steel slabs are pre-drilled for table top mounting, and an optional .25” thick wood backing plate is available to raise the slab off the table for easy cleaning. Glass slabs are provided with nonskid rubber feet.
Our Fingerprint Ridge Counters are the finest ridge counters available. Model A has a retractable tip which stores within the handle, and Model B has a fixed tip. They are supplied in clear, capped plastic protectors.
Our series of Lifting Tapes are the finest tapes available. They have a uniform application of adhesive and are heat treated and pressure wound to eliminate fish-eyes found in other brands of lifting tape. These tapes (360” L) are supplied on one inch cores, are available in both transparent and frosted versions, and come in 1.5’, 2”, 3”, and 4” widths. To prevent contamination, we provide our tape rolls in either ziplock bags or plastic tubes.
Comes in plastic or wood/metal. The wood/metal can be used for A4 cards. In addition, this unique packaging solution is transparent to allow items to be inspected without removal.
Porelon® Folding Fingerprinting Station, Tabletop, Single With ultra-black, nonfading ink always ready for use, Porelon® Inking Pads are an ideal choice of inking method in portable fingerprinting stations. FOLDING DESKTOP FINGERPRINTING STATION These compact Folding Desktop Fingerprinting Stations fold in half for easy storage and mobility. Each station comes with one attached Porelon® Inking Pad and one polymer cardholder, as well as non-skid rubber feet. This portable station measures 20.375\" L x 4.25\" W. FOLDING TABLETOP FINGERPRINTING STATIONThis sturdy Folding Tabletop Fingerprinting Station has fold-up-and-lock-down legs and is wood covered with an easy-to-clean black laminate. It measures 21.25\" L x 9.5\" W x 10\" H and has one Porelon® Inking Pad and one polymer cardholder attached. A free, lifetime-guaranteed black nylon carrying bag with built-in protective padding is included, with dual compartments for the station and for supplies, allowing for easy transport to field locations.
TRITECHFORENSICS' specifically formulated black Fingerprint Slab Ink is recognized as the best ink by identification bureaus throughout the world. This Slab Ink dries quickly on all paper forms yet remains soft on inking slabs and rollers for days.
Fingerprint Ink Rollers have comfortable, unbreakable, tapered black plastic handles that suit any hand size. When turned over, the stainless steel frame prevents the inked rubber roller from contacting the table top when not in use. Available in 2\", 3\", and 4\".
These standard 8” x 8” Fingerprint Record Cards are made of select 110 lb. index card stock. Our cards quickly absorb fingerprint ink without smudging or smearing. Flexible yet tough enough to resist creasing and wrinkling, our cards are printed front and back in red and can be used with any type of fingerprint ink your agency prefers. Note: Our Record Cards can be custom printed with your organization name and logo. Check out our custom products page for more information.
Fingerprint Chart illustrates and names common fingerprint comparison characteristics. It's a very useful reference and teaching tool.
Atomic Latent Print Powders - Triple A Triple A Powders contain an exclusive base ingredient to make these powders extra \"smooth\" and can be used on practically any surface. Our Triple A Powders are specifically formulated for use on old prints but can also be used on fresh prints as well. All Latent powders are packaged by volume. The net weight of the contents varies according to the color and composition.
Our series of Master Latent PrintK its are designed to provide an Kit components: investigator with a variety of latent powders, brushes, tapes, hinged • 1 ea. Master Carrying Case, 13\" L x 8\" W x 11\" H, with foam insert and divider lifters, etc., for the proper collection and preservation of latent prints at • 1 ea. 1 oz. Jar Midnight Black Magnetic Latent Print Powder virtually any crime scene. • 1 ea. 1 oz. Jar Gray Magnetic Latent Print Powder • 1 ea. 1 oz. Jar White Magnetic Latent Print Powder All of our Master Latent Print Kits are supplied in our lifetime warranty • 1 ea. 1 oz. Jar Red Magnetic Latent Print Powder Master Crime Scene Kit Cases; therefore, you’ll never have to deal with • 1 ea. 1 oz. Jar Silver Magnetic Latent Print Powder the expense or inconvenience of replacing your kit case. • 1 ea. 1 oz. Jar Dual Purpose Silver/Black Magnetic Latent Print Powder • 1 ea. TEX Retractable Magnetic Wand • 1 ea. 1.5\" x 360\" Lifting Tape, transparent, in plastic tube • 1 ea. 2\" x 360\" Lifting Tape, transparent, in plastic tube • 1 ea. 4\" x 360\" Lifting Tape, transparent, in plastic tube • 1 ea. Retractable Blade Scalpel • 1 ea. Reversible Latent Print Backing Card Pad, white, 50 cards/pad • 1 ea. Reversible Latent Print Backing Card Pad, black, 50 cards/pad • 1 ea. 2.5X Magnifier, 2.5\" diameter • 1 ea. L-Shaped Photomacrographic Scale • 10 ea. Nitrile Barrier Gloves
Our Disposable Fingerprint Inking Sheets consist of two pre-inked sheets of .010” acetate sandwiching a thin, even layer of fingerprint ink. Each sheet measures 1.5\" H x 5\" W or 6\" H x 10\" W. To use the pre-inked sheets, simply peel back the top sheet of acetate to expose the ink. Resting the sheet on a smooth, flat surface, roll the subject’s finger(s) on the bottom sheet and record the prints as you would using any other inking system. The black ink is quick drying and quickly absorbs into any type of record card. Advantages of Disposable Sheet: • Easy to use - Pre-inked, no rollers, no slabs, completely disposable. • Excellent Reproduction - Ultra-black, non-fading, quick drying, permanent fingerprint ink. • Reusable - Simply fold the sheet together, press firmly on a flat surface, and the sheet is re-inked for additional use.
Our Rubber/Gelatin Hinged Latent Print Lifters are specifically designed for lifting fingerprints from paper, cardboard boxes, or even wallpaper without destroying the surface. The low-adhesive gelatin on the rubber backing \"card\" allows the collection of developed prints from rough, grained or irregular surfaces, as well. Our series of Rubber/Gelatin print lifters are available in 3 different sizes with white, black, or transparent adhesive rubber backing cards and crystal clear mylar cover sheets.
The single color TRITECHFORENSICS Hinged Print Lifter Kit consists of a 4.75\" L x 4.75\" W x 1 .375\" H plastic box containing 48 lifters with either white, black, or transparent backing cards.The covers are made from .005\" thick, crystal clear, adhesive-backed mylar that is hinged to .01\" thick vinyl backing cards. After developing the print, simply peel off the inside release liner to expose the adhesive, \"lift\" the print, then close the mylar against the vinyl backing card to permanently secure it. Kit Components 24 ea. 1.5\" x 2\" Hinged Print Lifters 12 ea. 2\" x 4\" Hinged Print Lifters 12 ea. 4\" x 4\" Hinged Print Lifters
Fingerprint Developing and Lifting Fingerprint Taking •1 Black Powder, 2 oz. •1 Glass Inking Slab, 4”x10”, non-skid •1 White Powder, 2 oz. •1 Fingerprint Card Holder •1 Silver/Gray/Gold Powder, 2 oz. •1 Ink Roller, 2” •5 Regular Powder Brushes •1 Fingerprint Ink, 2 oz. •1 Ninhydrin Spray,8 oz./250 ml. •10 Ink Cleaner Towelettes •1 Transparent Lifting Tape, 1 2/3” x 360” •10 Fingerprint Record Cards •12 Transparent Hinge Lifter •12 Black Hinge Lifter Evidence Collection & ID •12 White Hinge Lifter •1 Handheld Magnifier •1 Penlight •1 Retractable Measuring Tape •1 Illuminated Folding Magnifier •1 Scissors •1 Latent Disposable Gloves, Pair •6 Evidence Bags
1 ea. 6\" Whisper Fiberglass Brushes 1 ea. 2\" x 360\" Lifting Tape, transparent, in plastic tube 1 ea. 2\" x 360\" Lifting Tape, frosted, in plastic tube 12 ea. 2\" x 4\" Hinged Print Lifters, white 12 ea. 2\" x 4\" Hinged Print Lifters, black 1 ea. Reversible Latent Print Backing Card Pad, white, 50 cards/pad 1 ea. Reversible Latent Print Backing Card Pad, black, 50 cards/pad Latent Print Chemical Development: 1 ea. 8 oz. Ninhydrin Pump Spray 10 ea. Press & Fume™ Cyanoacrylate Developer Fingerprinting: Our Three-tier Master Crime Scene Investigation Kit is the most 1 ea. Single Fingerprinting Cardholder extensive investigation kit we offer. 1 ea. Porelon® Fingerprint Pad, 5\" x 2.5\" 50 ea. Criminal Fingerprint Record Cards Our kit is supplied with all of the necessary components to develop 40 ea. Ink Remover Towelettes and lift latent prints, collect and preserve evidence, and take Evidence Collection: 1 ea. 2.5X Magnifier, 2.5\" diameter fingerprints from subjects at a crime scene. 1 ea. Ridge Counter 1 ea. Pocket Penlight, with batteries This kit is supplied with several latent print powders and both lifting 1 ea. 6\" Scissors tapes with backing cards and hinged lifters. 1 ea. 16 ft. Tape Measure 1 ea. Super-Stick Evidence Tape, 1\" wide 1 ea. Adhesive Backed Photo Scale Tape, 1\" wide Kit Components: 1 ea. Pocket Notebook 1 ea. Master Carrying Case, with foam inserts and dividers 20 ea. Nitrile Barrier Gloves 12 ea. Evidence Tags Latent Print Development: 12 ea. Evidence Labels 1 ea. 2 oz. Jar Velvet Black Latent Print Powder 10 ea. Evidence Security Bags, 5\" x 8\" 1 ea. 2 oz. Jar Dual Purpose Silver/Black Latent Print Powder 10 ea. Evidence Security Bags, 9\" x 12\" 1 ea. 1 oz. Jar Midnight Black Magnetic Latent Print Powder 1 ea. 1 oz. Jar Dual Purpose Silver/Black Magnetic Latent Print Powder Master Crime Scene Investigation Kit1 ea. Retractable Magnetic Wand 2 ea. 4.5\" Camel Hair Latent Print Powder Brushes
Our Bag It and Tag It™ Master Evidence Collection Kit is 1 ea. Black Evidence Marking Crayon specifically designed to assist crime scene investigators in 1 ea. White Evidence Marking Crayon finding, collecting, packaging, and preserving evidence found 3 ea. Marking Chalk 20 ea. Nitrile Barrier Gloves at a crime scene. 4 ea. 1 oz. Plastic Evidence Collection Jars 4 ea. 2 oz. Plastic Evidence Collection Jars Kit Components: 5 ea. .5 oz. Metal Evidence Collection Containers 1 ea. Master Carrying Case, with foam inserts and divider (21\" L x 14\" W x 10\" H) 5 ea. 1 oz. Metal Evidence Collection Containers 1 ea. Shirt Pocket Long Wave 4 Watt UV Lamp, with batteries 5 ea. 2 oz. Metal Evidence Collection Containers 1 ea. 5.5\" Straight Hemostats 10 ea. Evidence Security Bags, 5\" x 8\" 1 ea. 6\" Scissors 10 ea. Evidence Security Bags, 9\" x 12\" 1 ea. Retractable Tip Carbide Scriber 10 ea. Evidence Security Bags, 12\" x 15\" 1 ea. Disposable Scalpel with Retractable Blade 10 ea. Paper Evidence Security Bags, 5.25\" W x 3.5\" D x 10.75\" L 10 ea. Paper Evidence Security Bags, 7\" W x 4.5\" D x 13.75\" L 10 ea. Paper Evidence Security Bags, 12\" W x 7\" D x 17\" L 10 ea. Kraft Evidence Security Envelopes, 6.5\" x 9.5\" 10 ea. Kraft Evidence Security Envelopes, 9\" x 12\" 5 ea. Small Evidence Boxes, 2.25\" L x 1.25\" W x .75\" H 5 ea. Small Evidence Boxes, 2.75\" L x 1.75\" W x 1.125\" H 5 ea. Small Evidence Boxes, 3.5\" L x 2.5\" W x 1.5\" H 1 ea. 3.5\" diameter Magnifying Glass 1 ea. Flashlight, with batteries 1 ea. Sawtooth® Evidence Tape, Red 1 ea. Permanent Ink Evidence Marker 10 ea. Paper Evidence Tags 10 ea. Plastic Evidence Tags
2 ea. 4.5\" Camel Hair Latent Print Powder Brushes 1 ea. 6\" Whisper Fiberglass Brushes 1 ea. 2\" x 360\" Lifting Tape, transparent, in plastic tube 1 ea. 2\" x 360\" Lifting Tape, frosted, in plastic tube 12 ea. 2\" x 4\" Hinged Print Lifters, white 12 ea. 2\" x 4\" Hinged Print Lifters, black 1 ea. Reversible Latent Print Backing Card Pad, white, 50 cards/pad 1 ea. Reversible Latent Print Backing Card Pad, black, 50 cards/pad DNA Collection: 5 ea. DNA Blood Stain Collection Kits 5 ea. Suspect DNA Buccal Swab Collection Kits Gunshot Residue Collection: 5 ea. 12 Swab GSR-AA Collection Kits OR This three-tier kit is specifically designed for homicide 5 ea. 4 Stub GSR-SEM(C) Collection Kits investigators and contains all necessary components for Fingerprinting: developing and lifting latent prints, taking elimination prints, 1 ea. 2\" Elimination Print Kit and packaging evidence. In addition to the comprehensive Evidence Collection investigation components, our Master Homicide Investigation 1 ea. 8 oz. Luminol Blood Detection Reagent 1 ea. 2.5X Magnifier, 2.5\" diameter 1 ea. Pocket Penlight, with batteries Kit also contains fifteen individual forensic kits: 1 ea. 6\" Scissors 5 ea. Gunshot Residue Collection Kits 1 ea. 16 ft. Tape Measure 5 ea. DNA Blood Stain Collection Kits 1 ea. Super-Stick Evidence Tape, 1\" wide 5 ea. Suspect DNA Buccal Swab Collection Kits 1 ea. Adhesive Backed Photo Scale Tape, 1\" wide 1 ea. Pocket Notebook Kit Components: 10 ea. Nitrile Barrier Gloves 12 ea. Evidence Tags 1 ea. Master Carrying Case, 21\"L x 14\" W x 10\" H, with foam insert and divider 12 ea. Evidence Labels Latent Print Development: 1 ea. 2 oz. Jar Velvet Black Latent Print Powder 10 ea. Evidence Security Bags, 5\" x 8\" 1 ea. 2 oz. Jar Silver/Black Latent Print Powder 1 ea. 1 oz. Jar Black Magnetic Latent Print Powder SEM Master Homicide Investigation Kit10 ea. Evidence Security Bags, 9\" x 12\" 10 ea. Paper Evidence Security Bags, 7\" W x 4.5\" D x 13.75\" L 1 ea. 1 oz. Jar Silver/Black Magnetic Latent Print Powder 1 ea. TEX Retractable Magnetic Powder Wand
1 ea. 6\" Whisper Fiberglass Brushes 1 ea. 2\" x 360\" Lifting Tape, transparent, in plastic tube 1 ea. 2\" x 360\" Lifting Tape, frosted, in plastic tube 12 ea. 2\" x 4\" Hinged Print Lifters, white 12 ea. 2\" x 4\" Hinged Print Lifters, black 1 ea. Reversible Latent Print Backing Card Pad, white, 50 cards/pad 1 ea. Reversible Latent Print Backing Card Pad, black, 50 cards/pad Presumptive Drug Testing: 10 ea. NIK® Test A, Opium Alkaloids 10 ea. NIK® Test E, Marijuana 10 ea. NIK® Test G, Cocaine 10 ea. NIK® Test K, Opiates 10 ea. NIK® Test L, Brown Heroin This three tier kit is designed for narcotic officers and contains a total of 70 10 ea. NIK® Test Q, Ephedrine individual Presumptive Drug Testing Pouch Kits and 50 Cocaine Identification 10 ea. NIK® Test U, Methamphetamine/Ecstasy Swabs. 50 ea. NIK® Cocaine ID Swabs Fingerprinting: 1 ea. 2\" Elimination Print Kit The kit also contains all necessary components for developing and lifting latent Evidence Collection: prints, packaging evidence, and taking elimination fingerprints. 1 ea. 2.5X Magnifier, 2.5\" diameter 1 ea. Pocket Penlight, with batteries Supplied in our lifetime warranty Master Crime Scene Kit Case, reagent shelf 1 ea. 6\" Scissors life is indefinite if stored out of direct sunlight and at room temperature. Tube 1 ea. 16 ft. Tape Measure kits are also available. Please call our customer service department for pricing. 1 ea. Super-Stick Evidence Tape, 1\" wide 1 ea. Adhesive Backed Photo Scale Tape, 1\" wide Kit Components: 1 ea. Pocket Notebook 1 ea. Master Carrying Case, 21\"L x 14\" W x 10\" H, with foam insert and divider 10 ea. Nitrile Barrier Gloves 12 ea. Evidence Tags Latent Print Development: 12 ea. Evidence Labels 1 ea. 2 oz. Jar Velvet Black Latent Print Powder 10 ea. Evidence Security Bags, 5\" x 8\" 1 ea. 2 oz. Jar Silver/Black Latent Print Powder 10 ea. Evidence Security Bags, 9\" x 12\" 1 ea. 1 oz. Jar Black Magnetic Latent Print Powder 10 ea. Paper Evidence Security Bags, 7\" W x 4.5\" D x 13.75\" L 1 ea. 1 oz. Jar Silver/Black Magnetic Latent Print Powder Master Narcotics Investigation Kit1 ea. TEX Retractable Magnetic Powder Wand 2 ea. 4.5\" Camel Hair Latent Print Powder Brushes
The ability to study and measure the spread and distribution of firearms discharge particles on the clothing of a victim or upon an object can be a useful tool in determining the distance and angle of firearms discharge. Although the traditional methods of examining visible particles and scorching or tattooing are useful, smaller particles and condensed gases are generally not observable. A chemical method of detection and enhancement allows these particles and condensed lead gases to turn a pink color then a blue color for more accurate determinations. This method can also be utilized to determine if a suspicious hole in an object is in fact a bullet hole. In this case, the lead wipe commonly present around a bullet hole will be visualized as a blue color. Our Firearms Residue Detection Kit provides all of the chemical reagents and supplies required to perform these enhancement procedures. The kit contains eight sets of premeasured reagents, spray heads, positive control strips, and instructions for use. KIT COMPONENTS: • Plastic Kit Box, 12\" L x 7.5\" W x 4\" H • Firearm Residue Detection Powder – 8 vials per kit • Firearm Residue Detection Reagent A – 8 bottles per kit • Firearm Residue Detection Reagent B – 3 bottles per kit • Firearm Residue Detection Reagent C – 3 bottles per kit • Container of Positive Control Strips • Spray Heads – 4 per kit • Kit Instructions Affixed to Inside of the Box
Our quick drying Ninhydrin Spray is supplied in an easy-to-use pump misting bottle and is an extremely sensitive method for developing old latent prints on paper documents, letters, newspaper, envelopes, wrapping paper, checks, and even wallpaper at a crime scene. Ninhydrin reacts to the proteins and amino acids found in fingerprints. When ninhydrin is sprayed on the suspected area, the print will appear purple in color when heated to approximately 220 degrees in an oven or with a hair dryer or infrared lamp. A detailed instruction sheet is supplied with each bottle of our Ninhydrin Spray.
Our individual, disposable Fingerprint Ink Remover Towelettes are ideal for removing fingerprint ink from fingers and hands. Each 5” x 8” towelette is saturated with a specially formulated ink removing solvent and stays moist in a hermetically sealed foil package.
TRITECHFORENSICS' Fingerprint Ridge Builder is used to add definition and clarity to fingerprint ridges, permitting you to obtain readable prints from the elderly, subjects with poor ridge structure, or subjects who work with their hands, such as brick layers or farm workers. Our Fingerprint Ridge Builder is also used in our master Postmortem Fingerprinting Kit as a method for restoring deflated finger bulbs. Our Fingerprint Ridge Builder is supplied in a convenient pump spray bottle. Simply spray the subject’s fingertips with our fast drying, antiseptic ridge builder, then follow your normal fingerprinting procedures.
The Fuma-Dome™ is a revolutionary system for developing latent prints via cyanoacrylate (superglue) fumes. Unlike other fuming guns, the Fuma-Dome™ combines a fuming gun and fuming chamber into one system specifically designed for use at a crime scene. It can also be used in the crime laboratory. This innovative design also incorporates a rechargeable cyanoacrylate cartridge, eliminating the need to purchase expensive one-use-only cartridges. At less than 25 cents per charge, the Fuma-Dome™ is extremely cost effective for your department. Fuma-Dome™ is supplied with: 1 ea. 1.48 oz. Pressurized Butane Fuel Container 1 ea. 1 oz. Liquid Cyanoacrylate Bottle (to recharging the cartridge) 1 ea. Detailed Instruction Sheet
Our completely redesigned, portable and lightweight fuming chamber fits a wide variety of commonly processed evidence, including cans, bottles, and weapons. The chamber has an integrated port in the side which allows for insertion of a fuming wand or can be used with a fume extraction device. This versatile chamber can be used at the crime lab or in the field. SPECIFICATIONS • Includes (2) hanging bars with (4) clips for suspending evidence • Magnetic latch simplifies chamber loading and unloading • Convenient metal carrying handle allows for easy transportation and storage at the crime scene or the lab • Made from durable ABS plastic • 15” W x 11” H x 8” D (38.1 x 27.9 x 20.3 cm) • Weighs 4 lbs.
Kit Components The Fume-A-Wand butane fueled, auto-igniting fuming gun can be • 1 ea. Copolymer Carrying Case, w/foam inserts ( 10.25\" L x 7\" W x 1.75\" H) used in the lab or at a crime scene for developing prints by means • 1 ea. Complete Cyanoacrylate Fuming Gun of cyanoacrylate fuming. • 1 ea. 1.48 oz. Butane Cartridge • 10 ea. Standard Cyanoacrylate Cartridges To use the gun, simply insert a fuming pellet and ignite the safety • 1 ea. Cartridge Extraction Tool trigger switch. Cyanoacrylate fuming begins almost immediately. • 1 ea. Kit Instruction Sheet The gun is also provided with a built-in bipod stand which keeps the hot tip of the gun off surfaces during cool down. The cyanoacrylate pellets are available in standard for traditional fuming and Orange-Aid UV for enhanced coloring and UV viewing without additional chemical treatments. Our butane cartridge will fuel three to four hours of continuous operation. Note: Traditional standard size brass fuming cartridges can be used with the Fume-A-Wand by inserting the cartridge into the fuming head in the same manner as you would with the pellets.
Iodine Fuming Kit Iodine Fuming is one of the traditional development methods which is generally used on porous materials such as paper and cardboard and is generally applied before Ninhydrin or Silver Nitrate processing. The Iodine Fuming Kit contains a .75\" diameter glass tube iodine fuming apparatus, drying crystals, filter wool, Iodine crystals, and instructions in a sturdy plastic carrying case. To use the fuming gun, iodine crystals, filtering wool, and drying granules are inserted into the glass tube. Gently blowing into the gun warms the crystals, allowing them to release a vapor which is directed onto the area to be fumed via included tubing. When fuming is completed, the gun may be kept assembled until the crystals have been exhausted.
TRITECHFORENSICS is proud to offer the newly enhanced CSIpix® Comparator, Version 5.0, an innovative forensic imaging software that runs on your PC – no new hardware required. Some of the most respected names in the forensics field are using this software to efficiently process forensic images like fingerprints, palm prints, footprints, treadmarks, and ballistics markings from the crime scene to the court room. Scan crime scene images directly into CSIpix® Comparator 5.0 or simply drag and drop these images from e-mails or folders. Scroll through folders efficiently using the thumbnail preview feature. Quickly display two images side by side at the same magnification. Print at 1:1 scale. Easily prepare court exhibits and paste them directly into a slideshow presentation or print them. New Features SYSTEM REQUIREMENTS •Ridge tracing Processor: Pentium 4 •Polynomial Regional of Interest (ROI) for Enhance functions Operating System: Windows XP Service Pack 3/Windows Vista/Windows 7 •Edge blending for Enhance RAM: 1.0 Gigabytes Graphics Card: 32 bit color Monitor: 1024 x 768 pixel resolution
SYSTEM REQUIREMENTS CSIpix® Matcher, Version 5.0 is a powerful new tool based on the CSIpix® Processor: Pentium 4 Comparator. Operating System: Windows XP Service Pack 3/Windows The Matcher can be used to perform an in-depth automated comparison Vista/Windows 7 between a latent fingerprint and a tenprint card or between a latent and a RAM: 1.0 Gigabytes known palmprint. Graphics Card: 32 bit color The Matcher assists examiners with the comparison of a latent print to a known Monitor: 1024 x 768 pixel resolution print by highlighting regions on the known tenprint or palm that match the features of the latent print. The latent print is also rotated appropriately so it lines up with the matching region of the known print. In many cases only one region is highlighted, so the examiner can quickly exclude non-matches or begin work on the detailed comparison. New Features In Version 5: The Matcher can be especially useful when a latent print (finger or palm) is of poor quality with few minutiae and small area. It can save significant time when comparing a partial latent palmprint to the relatively large area of a known palmprint. In cases where a latent fingerprint is poor quality with few minutiae and/or a small usable area, more than one matching region may be highlighted. In this case non-matching regions can typically be eliminated quickly.
CSIpix AFIS installs right on your computer in minutes. You just copy images of fingerprints (latent or knowns), palm-prints, or even whole ten-prints into a directory, run the batch to enroll and then search. There is no database and no special formatting is required. You can put all of your ‘usual suspects’ in a directory and do a quick Case AFIS search before going through the process of submitting a latent to a larger regional AFIS. It is a quick way to process elimination prints and it allows you to remove unwanted prints from the directory if required by privacy protocols. When you get a hit from a search, the latent and known prints are displayed with the matching minutia patterns clearly highlighted at the same orientation. Ideal for quick searches of: •‘Usual’ Suspects •Suspects •Eliminations •Victims Flexible features and search capabilities: •Simply copy finger/palm images to a directory – no complex data entry •No database to install •Auto minutia detection/enrollment •Search with as few as five minutia points •360 degree search or restrict angles •With or without level one info •Search any image with friction ridges, including ten-print cards, palms, fingerprints, and latents •Remove elimination prints after searching to accommodate privacy restrictions
FEATURES The Regula MAG-FM5 and MAG-FM/L Fingerprint Magnifiers were designed specifically for • 5X magnification classification and investigation of fingerprints and for examination of small objects using 5X • High Illumination magnification. Each magnifier contains one 1.8 in (46 mm) diameter, optically ground, and • Henry Disc polished glass lens, providing uniform and crystal clear magnification across the entire field. • Easy-to-use • Optically Ground The MAG-FM5 and MAG-FM/L Fingerprint Magnifiers provide excellent central and side • Polished Glass Lens sharpness, brightness, and contrast with correct color range, magnification, and convenience in • Precision Focusing use. The field of view is sharp with no distortion and precision focusing is accomplished with a • Wooden Stand for Safe Storage worm screw height adjustment. The MAG-FM5/L model boasts a light source that makes viewing easy in any lighting condition. The built-in LED light source has three levels of intensity that can easily be adjusted by pressing the power button. Both MAG-FM5 and MAG-FM5/L are supplied with a single Henry coding disc and include a convenient wooden stand for safe storage of the unit and coding disc. Note: The coding disc fits only our Regula MAG-FM5 or MAG-FM5/L Fingerprint Magnifier. SPECIFICATIONS • Unit Dimensions: 3.5 in x 2.2 in x 2.7 in (90 mm x 56 mm x 69 mm)* • Lens Diameter: 1.8 in (46 mm)* • Weight: 0.7 lbs (320 g)* • Power Supply: 2 AAA Batteries * These sizes are only an approximate. Actual size may differ slightly.
Our nontoxic Thief Detection Powders are used to trap thieves. These powders are usually applied to articles subject to theft or tampering such as currency, paper money, alarm boxes, cash drawers, etc. The color of the powder selected should be compatible to the surface color of the article being treated. Upon direct contact with the article, the suspect can be easily identified by the incriminating stain on his/her hands. The special dye formulation actually intensifies and spreads once the thief attempts to wash off the stain. Usually the stain remains on the hands and clothing for days, even after several attempts to wash it off. When exposed to a long wave UV lamp (black light), these detection powders have a powerfully brilliant fluorescent quality impervious to washing. They are supplied in a variety of natural colors to blend with nearly any background to eliminate visual detection by the perpetrator. Our Thief Detection Pastes and Powders are available in two ounce volume jars packaged by volume. The net weight of the contents varies according to the color and composition. Notice: This item can be purchased by law enforcement agencies or private investigators only. These fluorescent detection powders are manufactured in our laboratories solely for the purpose of criminal detection. Our powders also provide excellent adhesive properties assuring transfer from the treated article to the suspect's hands or clothing. These Invisible Detection Powders are recommended for indoor application and are supplied in two ounce volume jars.
Natural hair brushes are the most commonly used brushes for developing latent prints. We offer a wide variety of lengths, shapes, and types of soft, high quality natural hair brushes. Each brush is packaged in a clear plastic tube with a cap to prevent damage to the hairs when not in use. Our wooden brush handles are painted with a high gloss black enamel for easy cleaning. (A) Black Goat Hair – Flat, 9.5″ L (B) Black Goat Hair – Flat, 7″ L (C) Pony Hair – Flat, 7″ L (D) Black Goat Hair – Flat, 7″ (E) Kazan Squirrel Hair – Rounded, 6.375″ L (F) Black Squirrel Hair – Rounded, 6.75″ L (G) Black Goat Hair – Flat, 6.5″ L (H) Camel Hair – Flat, 4.5″ L (I) Camel Hair – Flat, 6″ L
Search
