36.how to install a backup camera stereo in a car

How To Install A Backup Camera Stereo In A Car We know that every person who has a car wants to enjoy an outdated ride. One of the main things that will provide a good car riding experience is a backup camera stereo in that car. The backup camera installation is such a great idea that every automobile manufacturer gives to their car buyer. The automotive industry is providing many safety features to the cars by using different helpful tools. Undoubtedly, we can say that a backup camera is also a good feature in the latest car models. These backup cameras are available at different rates. It helps us to update old vehicles. In branded vehicles, this camera is integrated into electronics. In this way, the components of the car model are hidden. It is the primary goal that every customer wants in their vehicles. You always do not need to contact manufacturers to install a backup camera because you can do this task by yourself. Here, we at Motoristcare will tell you that how you can install a backup camera in your car. How can you install a backup camera stereo in a car? If you want to install a backup camera in a car, you need some necessary tools. These tools include Phillips screwdriver, Wire strippers, Electric tape, Trim/panel removal tools, Zip ties, Flathead screwdriver, Cordless drill, and Wire connectors Posy-taps, Automotive Multi-meter, and other members like friends or family member. Now we will tell you some steps that you should follow to install a backup camera stereo in your car? Step 1: Connecting the camera: Firstly ensure your car is turned off and you disconnected the terminals of the car's battery. Now separate the license plate from your vehicle. Place the camera in your desire position. Mark that place where the camera's cord touches the vehicles. When you begin to drill holes on the car's outer surface, make sure that there are no cables, wires, and trim pieces. If these wires are present, they may be damaged by drilling. The size of the hole depends on the length and width of the camera's wire. You should have only a visual inspection in this regard. Step 2: The camera's wiring installation: Now connect the camera wire to the wire cluster. It will split into the power wire, reverse signal wire, and video wire. Look power source for the camera and use a multi-meter to recognize the negative and positive wires.

You should join positive wires of the camera and light together. Similarly, join their negative wires with the help of pos-tape. Step 3: Joining the wires: If you do not have posy-tape, then splice the wires through the military splice. Now use the wire stripper to hold the positive light wire and reveal the copper by removing the plastic coating. Pass this wire through the hole of the copper. Twist and wrap the positive wires of the camera and light to make a strong connection. Step 4: Wrapping up the wires: You need a signal to know that the vehicle is in reverse. It helps you to show a video feed. Now get prepared for routing and making all wire connections. After connecting wires, cut the extra cables, wires, and other waste pieces. Now connect the battery terminals again and wrap up the installation process. Final Thoughts: You always want to make your car more modern and safer. So when you consider important features of the car, you cannot forget the backup camera. If you do not have enough money to contact some manufacturer for the camera installation, save your money by following the above steps.