HVP 2016_FINAL_RFQ

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn High Value Parts Catalogue 2016 Edition– Please visit us at: www.koncepttech.com Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed. Page 1 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInContentsWolfking® / CFS® / GEA® / Simo Grinder Parts ........................................................................................................................................4Wolfking® / CFS® / GEA® / Simo Grinder Parts (continued).....................................................................................................................5Wolfking® / CFS® / GEA® / Simo Grinder Parts (continued).....................................................................................................................6Wolfking® / CFS® / GEA® Grinder parts –screw cap.................................................................................................................................7Wolfking® / CFS® / GEA® Grinder parts –Pulleys/Poly-V belts.................................................................................................................8Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger.........................................................................................................................9Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger.......................................................................................................................10Wolfking® / CFS® / GEA® Grinder Parts – Lining / knife housing / Worm..............................................................................................11Wolfking® / CFS® / GEA® Grinder Parts – Lining / knife housing / Worm..............................................................................................12Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts.......................................................................................................................13Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts.......................................................................................................................14Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts (continued) ..................................................................................................15Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts (continued) ..................................................................................................16Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts (continued) ..................................................................................................17Wolfking® / CFS® / GEA® Grinder Parts – Overview of parts for C250/300 UNI ....................................................................................18Wolfking® / CFS® / GEA® Grinder Parts - Overview of parts for C250/300 UNI (continued) .................................................................19Wolfking® / CFS® / GEA® Grinder Parts – Electrical parts ......................................................................................................................20Wolfking® / CFS® / GEA® / Simo® Type Grinder Parts...........................................................................................................................21Wolfking® / CFS® / GEA® Grinder Parts – AutoGrind 280 ......................................................................................................................22Wolfking® / CFS® / GEA® Grinder Parts – AutoGrind 280 ......................................................................................................................23Wolfking® / CFS® / GEA® Grinder Parts Emulsifier Parts - Ecocut E.225................................................................................................24Wolfking® / CFS® / GEA® Grinder Parts Emulsifier Parts - Ecocut E.225................................................................................................25Wolfking® / CFS® / GEA® Emulsifier Parts - Ecocut E.225......................................................................................................................26Wolfking® / CFS® / GEA® Emulsifier Parts - Ecocut E.225 Electrical parts .............................................................................................27Wolfking® / CFS® / GEA® Emulsifier Parts - Ecocut E.225......................................................................................................................28Wolfking® / CFS® / GEA® Emulsifier Parts – Quadrocut 225/ Ecocut E.225...........................................................................................29Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts ..................................................................................................................30Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts ..................................................................................................................31Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts ..................................................................................................................32Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts ..................................................................................................................33Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts / Mixing Wing seal assembly....................................................................34Wolfking® / CFS® / GEA® / Simo® Type Pump Parts ..............................................................................................................................35Wolfking® / CFS® / GEA® / Simo® Type Pump Parts (continued)...........................................................................................................36Wolfking® / CFS® / GEA® / Simo® Type Pump Parts ( continued ) .........................................................................................................37Wolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machine ...............................................................................................38 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 2 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machine ...............................................................................................39Wolfking® / CFS® / GEA® Contiflow Pump.............................................................................................................................................40Wolfking® / CFS® / GEA® Contiflow Pump-250 & Vanepump SF &DF ...................................................................................................41Wolfking® / CFS® / GEA® Contiflow Pump-250 & Vanepump SF &DF ...................................................................................................42Cozzini® Type Pump Parts......................................................................................................................................................................43Cozzini® Type Pump Parts (continued) ..................................................................................................................................................44Cozzini® Type Cozzini 400 Gear ............................................................................................................................................................45Refurbishments and Exchange Parts .....................................................................................................................................................46Refurbishments and Exchange Parts .....................................................................................................................................................47New Machines – www.scansteelfoodtech.com.....................................................................................................................................48Meet our Global Team...........................................................................................................................................................................49Meet our Global Team...........................................................................................................................................................................51Koncept Tech ApS member of scansteel foodtech group......................................................................................................................52 How to Request For Quote:Throughout the catalogue, you will find this icon .When you click this icon, you will add the item next to it to youritem list.Click the when you have finished and you want toRequest For Quote. Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 3 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® / Simo Grinder PartsWolfking® / CFS® / GEA® / Simo Grinder Parts We supply parts for the following mincers/grinders:GEA® PowerGrind 280 Wolfking® Waliant 140GEA® AutoGrind 280 Wolfking® C.160-UNI (L or S)GEA® AutoGrind 200 Wolfking® C.200-UNI (L or S)GEA® UniGrind 160 Wolfking® C.250-UNI (L, S or S2T)GEA® UniGrind 200 Wolfking® C.300-UNI (L, S or S2T)GEA® UniGrind 250 Wolfking® C.300 Frozen Block GrinderGEA® ComboGrind 1500/250 Wolfking® C.400-UNI-(L, S or S2T)GEA® MaxiGrind 400 Wolfking® C.400-UNI-HD (S or S2T)GEA® MaxiGrind 400 HD (Heavy Duty) Wolfking® C.400-2T70 Wolfking® B.400-UNI-(L, S or S2T)CFS® PowerGrind 280 Wolfking® B.400-UNI-HD (L, S or S2T)CFS® AutoGrind 280 Wolfking® BB.400CFS® AutoGrind 200 Wolfking® BF.400CFS® UniGrind 160 Wolfking® BMF.400CFS® UniGrind 200 Wolfking® Self Feeding Grinder, SFG 800/200CFS® UniGrind 250 Wolfking® Self Feeding Grinder, SFG 1500/250CFS® SpeedGrind 250 Wolfking® Homogenizer 250/75CFS® ComboGrind 1500/250 Wolfking® Homogenizer 250/125CFS® ComboGrind 850/200CFS® MaxiGrind 400 Simo® SuperGrind 300/150CFS® MaxiGrind 400 HD (Heavy Duty) Simo® SuperGrind 300/230CFS® ChunkMaster 400 Simo® SuperGrind 400/190CFS® SuperGrind 300/150 Simo® SuperGrind 400/260CFS® SuperGrind 300/230 Simo® SuperGrind 400/260-HDCFS® SuperGrind 400/190 Simo® SuperGrind 550/260-HDCFS® SuperGrind 400/260CFS® SuperGrind 400/260-HDCFS® SuperGrind 550/260-HDCFS® ComboGrind 850/200CFS® ComboGrind 1500/250CFS® SpeedGrind 250/75CFS® SpeedGrind 250/125 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 4 of 52

Follow Koncept Tech on LinkedInFollow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® / Simo Grinder Parts (continued) Grinder PartsWolfking® /TCypFSe®: W/ GalEiAan®t/1S4im0,oC.G1r6in0d-UerNPI,aCrt.2s00-UNI, C.250-UNI, C.300-UNI, C.400-UNI, C.400-2T70, B.400, BB.400, BF.400, FBG.300- Worms/augers Ø400 knife housing Machine shoes- Linings Ø400 knife housing Machine shoes- Knife housings Cylinder for BES Roller bearing, bushing, and D-nut- Clamps for knife housings Cylinder for BES Roller bearing, bushing, and D-nut- Clamps for linings- Distance rings for knife housings- Major parts BES- Major parts CFD- Gear boxes- Pulleys- Belt pulleys- Knife sets all types- Pilot bearings- Roller bearings- Bushings- D-nuts for bushings- Machine shoes- Accessory trolleys- Screw caps Clamps Wolfking® / CFS® / GEA®/ Simo Grinder Parts - ContinuedCla mps Lining for C.160Lining for C.250 Lining for C.160 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 5 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® / Simo Grinder Parts (continued)Wolfking® / CFS® / GEA®/ Simo Grinder Parts - ContinuedD-Nut, lining and roller bearing D-nut, roller bearing and lining. D-nut, roller bearing and lining.D-Nut, lining and roller bearing nut Bushing Roller bearing Machine Type 30667 30991 N/A 30664 30819 N/A C.160-UNI / UniGrind 160 30005 31246 31177 C.200-UNI / UniGrind 200 36588 35920 36587 C.250-UNI / UniGrind 250 309664 30378 32549 C.300-UNI / UniGrind 300 /30666 /32554 C.400-UNI / UniGrind 400 Machine Type Pilot BearingC.160-UNI / UniGrind 160 30353C.200-UNI / UniGrind 200 30343C.250-UNI / UniGrind 250 30351 /367446C.300 FBG 35921C.400-UNI / UniGrind 400 32555 /365446C.400-Uni closed pilot bearing 404247AutoGrind 200 452319AutoGrind 280 452402Simo 300 3508-37 Pilot bearing C.250 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comLining for C.160All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 6 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder parts –screw capWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWPoalfrktinngu®m/bCeFrS® / GEA® Grinder Parts – Worm / Auger Screw cap30897 Screw cap Ø250, stainless steel35882 Screw cap Ø300, stainless steel for Frozen Block Grinder 30690 / CFS® / GEASc®rGewrincdaepr PØa4r0ts0–wWithortmhr/eaAdu,gsetrainless steelWolfking®Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger - ContinuedWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / Auger Screw cap Ø250 part number 30897 Lining for C.160 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 7 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder parts –Pulleys/Poly-V beltsWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerPart number Pulleys302332 Pulley 260/75mm M24 Tape/look.Wolf3k0in2g3®3/1CFS® / GEAP®ulGleryin2d4eMr P1a8r0ts, b–oWreodrmØ7/5Auger23842 Pulley 24M 63023819 Pulley 32L 400Wo6lf4ki0n9g-®2 / CFS® / GEAP®ulGleryinSdPeBr 2P4a1rt0s – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / Auger - ContinuedWPoalfrktinngu®m/bCeFrS® / GEA® Grinder Parts – Worm / Auger Poly V-belt24048 Poly-V belt 1185 M2424047 Poly-V belt 1060 M2424046 Poly-V belt 990 M24, 2.515 mmWolfk2i4n0g®28/ CFS® / GEAP®olGy-rVinbdeelrtP9a1r5tsL3–2Worm / Auger24027 Poly-V belt 880L3224022 Poly-V belt 815 L32Wolfking® / CFS® / GEA® Grinder Parts – Worm / Auger Pulley part no.: 6409-2 - SPB 2410 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] Lwinwingwfo.rkCo.1n6c0epttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 8 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AuDgiearmeter Lenght (L2) Description Part number mm Lenght (L1) Pin part numberWorm Waliant 140 S/S 33414 33562Worm Ø160-S SFG and TSMG models 33100Worm for C.W16o0lfUkinnigL® / CFS® / GEA® Grinder P3a2rt9s2–1 Worm / AugerWorm C.250-L / UniGrind-L S/S 30186 192 1189 153 30024 /322971Worm C.250-L / UniGrind-L M/S 30052 192 1189 153 30024Worm C.250W-So/lfUkniniGg®ri/ndC-FSSS®//SGEA® Grinder P3a0rt0s5–3 Worm / Auger192 929 153 30024 /322971Worm C.250-S2T M/S 30189 /30019 192 854Worm TSMG/250-L S/S 30179 192 1047 153 30024 /322971Worm TSMG/250-S S/S 30178Worm C.250W-So2Tlfkwinitgh®c/uCttFiSn®g /edGgEeAs® Grinder P3a0rt5s5–1 Worm / Aug1e4r7/192 854 153 30024 /322971Worm C.250-S2T spec.lenght 48257Worm C.200-L UniGrind-L S/S 32455 126 1072 32933Worm C.200-S UniGrind-S S/S 32924 126 32933Worm C.200W-LoUlfnkiiGnrgi®nd/-CLFMS®/S/ GEA® Grinder P3a2r9ts2–5 Worm / AugerWorm TSMG/200-L S/S 32923 126 32933Worm C.300 FBG S/S 37327 192 979 153 37328Worm C.300 FBG M/S 37329 37328Worm C.400-S M/S 31196 1641.5 220Worm C.400-S S/S 31197 1641,5 220Worm C.400-S UniGrind-S M/S 31036 310/354 1241 (48,875) 220 (8,66) 30224Worm C.400-S UniGrind-S S/S 31035 310/354 1241 (48,875) 220 (8,66) 30224Worm C.160 –L 33099 1070 115 30377Worm C.160 30324Worm C.400-S2T S/S 31191Worm C.400-S2T M/S 31192 30224Worm B. / C.400-S2T HD S/S 31200 255/354 1641 (64,625) 222 (8,66) 30224Worm B. /C.400-S2T HD M/S 31201 30224Worm B.400-S2T M/S 309709 1641 255 Extra long worm pinWorm B.400-S2T S/S 309713 1641 255 Extra long worm pinWorm C.400-2T-70 Type A. M/S 30335Worm C.400-2T-70 Type B. M/S 30322Worm BB.400 High capacity 46647 1679 140Worm BF.400 HD 45260 /364041 308 1881 140Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 9 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolDfkeinscgr®ip/tiCoFnS® / GEA® Grinder PartsP–arWt nourmmb/eAruger Diameter Lenght Lenght (L2) Pin part numberWorm WinkelWolf/WW200 M/S 198D038M mm (L1) 120 052B001T 160 510,5 165 36100S2501Worm AutoGrind 200 S/S, fresh 3610522G02 160 700Feeding worm AutoGrind 200 3610784KFeeding woWrmolfAkuintog®Gr/inCdFS2®80/ GEA® Grinder Parts35–5W40o0rm01/ AugerFeeding worm AutoGrind 280 3550847K 345 1283 114Worm Short MC250 3502-160Worm for MH400/190 high speed 3502-258Worm for CW25o0lf-kSin2gT®M//CSFS® / GEA® Grinder Parts –30W0o1r9m / AugerGrinding worm AutoGrind 280, special 3550848M-SGrinding worm AutoGrind 280, special 3550847K-SWorm TSMWIGo2lf7k5in0g/®22/5C-FUSn®i /L GEA® Grinder Parts –3W87o4r2m / Auger 1002Worm TSMIG 2750/225-Uni M 38755 852 840Grinding worm AG 280 3550848M 192 1175 130 192 1175 112Worm C.250-L/CFD M/S 30302 192 1033 112 30228 192 1033 110 30228Worm C.25W0-oLl/fCkFinDg®S//SCFS® / GEA® Grinder Parts –3W03o0r3m / Auger 110 30228 30228Worm TSMG/C.250-L/CFD M/S 30182Worm TSMG/C.250-L/CFD S/S 30183*M/S = Mild steel S/S = Stainless steel Wolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWorm pin Auger/wormWorm pin Auger/worm for C.160-UNI-L & SWorm pin Auger/worm for C.160-UNI-L & SWorm pin Auger/worm for C.160-UNI-L & SWorm for WinkelWolf200/WW200, 198D038M Worm for AutoGrind 200/AG200, 3610522G02Worm pin Auger/worm for C.160-UNI-L & SAuger/worm for C.160-UNI-L & S Auger/worm for C.160-UNI-L & SKoncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] Auger/worm for C.160-UNI-L & SWorm pin www.koncepttech.comAuger/worm for C.160-UNI-L & S Auger/worm for C.160-UNI-L & SAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Worm pin Auger/worm for C.160-UNI-L & SPoss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassAocuiagtioenr/orwafofilriamtionfowirthCa.n1y6en0ti-tiUesN/ cIo-mLp&aniSes listed. Page 10 of 52 Auger/worm for C.160-UNI-L & SWorm pin Auger/worm for C.160-UNI-L & S

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – Lining / knife housing / WormWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerPart number Flange for worm 30167 Flange with square hole for worms, stainless steelWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerPart number Knife housingWo3lf0k7in7g9® / CFS® / GEKAn®ifeGrhinoduesirnPgaCrt.2s0–0W(moromde/l A8u2)geSr/S- Continued38744 Knife housing Ø225 for BES TSMIG/225 stainless steel30443 Knife housing C.25030205 Knife housing for BES ( model 82) S/SWo3lf5k8in8g1® / CFS® / GEKAn®ifeGrhinoduesirnPgaCrt.3s0–0WFBoGrm / Auger36147 /309382 Knife housing C.30030420 Knife housing C.400 trapez thread S/SWo3lf8k3in8g7® / CFS® / GEKAn®ifeGrhinoduesirnPgaLritnsin–gWCo.2r5m0-/LA, Su/gSerwith water jacket for C.250UNI/C.300UNI/TSMG models with same grinder unit30646 Lining/knife housing for C.400-2T-70 S/SWo3lf13k00in36g24®5/ CFS® / GEKKAnn®iiffeeGrhhinooduuessiirnnPgga/cLr.ti4ns0i–n0g/WbØo.44r00m00-/U(tAnyupi gmeeAirld), steel with trapeze thread stainless steel for C.400-2T-7030646 Knife housing/Lining Ø400 (type B), stainless steel for C.400-2T-70Part number Key for knife housing 30913 Key for knife housing C.250 30910 Key for knife housing C.300 30725 Key for knife housing C400 MD82 30724 Parallel key for C.400 (knife housing and lining) Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 11 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – Lining / knife housing / WormWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerPart number Lining 30681 Lining C.160/200-L stainless steelWolfkin33g33®7711/ 23CFS® / GEA® GrinLLiidnneiinnr ggPaCCr..11ts66–00//W2200o00r--mSL ss/ttAaaiiunnglleeessrss steel steel35292 Lining C.250-L stainless steel35293 Lining C.250-S stainless steelWolfkin3g5®29/4CFS® / GEA® GrinLidneinrgPaCr.2ts50–-WS2oTrmsta/inAleusgsersteel32452 Lining C.400-S stainless steel30647 Lining C.400-S2T stainless steel30650 Lining C.400-S/B.400-S mild steelWolfkin4g9®88/1CFS® / GEA® GrinLidneinrgPaBrFt.s4–00WHoDrmsta/iAnluegsesrs-teCeolntinued38743L Lining Ø225-L TSMIG38756 Lining Ø225-M TSMIG/TSMIP stainless steelWolfk3in6g1®07/0C5FS® / GEA® GrinLidneinrgPaØr2ts00– AWuotormgri/nAdu2g0e0r 30645 Knife housing/Lining Ø400 (type A), stainless steel for C.400-2T-7030646 Knife housing/Lining Ø400 (type B), stainless steel for C.400-2T-70Wolfking® / CFS® / GEA® Grinder Parts – Worm / AugerWolfking® / CFS® / GEA® Grinder Parts – Worm / AugerLining/knife housing for BB 400 L, 30645 Lining for C.400Worm pin Worm pinWorm pin Worm pinKoncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] pin www.koncepttech.com Worm pinAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Worm pin Worm pinPoss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 12 of 52Worm pin Worm pin

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsWolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsWolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsWolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsGear box for C.400/B.400 Gear box for C.250 Gear box for C.160/C.200Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Drive shaft for C.160/C.200 GearboxWolfking® / CFS® / GEA® Grinder Parts - Gear BoDxrivPeashrtasft for C.250 Gearbox Gear box for C.160/C.200 Drive shaft for C.400/B.400 Gearbox Gear box for C.160/C.200Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Drive shaft for C.160/C.200 Gearbox GearboxDrive shaft for C.400/B.400 Gearbox Drive shaft for C.250 Gearbox Gear box for C.160/C.200WolGfekairnbgox® / CFS® / GEA® Grinder Parts - Gear BoxGePaarbrotxs Gear box for C.160/C.200 Gear box for C.250 Drive shaft for C.160/C.200 GearboxGear box for C.400/B.400 PS Seal for C.160/C.200 Gearbox Drive shaft for C.400/B.400 Gearbox Drive shaft for C.250 Gearbox Gear box for C.160/C.200Shaft sealing for C.400/B.400 Gearbox Shaft sealing for C.250 Gearbox Gear box for C.160/C.200Drive shaft for C.400/B.400 Gearbox Drive shaft for C.250 Gearbox Drive shaft for C.160/C.200 GearboxGGeeaarrbbooxx for C.400/B.400 Gearbbooxx for C.250 GearboxDrive shaft for C.400/B.400 Gearbox David Brown GDeraivrbeosxhfaoftr fCo.r40C0.2/5B0.4G00e-aUrbNoI/xHeavy Duty Drive shaft for C.160/C.200 GearboxShaft sealing for C.400/B.400 Gearbox Shaft sealing for C.250 Gearbox PS Seal for C.160/C.200 GearboxKoncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation oDGr arefifaivliaretibosnohwxaitfhftoafrnoyCre.nC4ti.t0i4e0s0//0cBo/.mB4p.0a4n00ie0s liGsteeda. rbox PageGD1eriav3rebosohfxa5ffto2froCr.C2.52050 Gearbox Drive shaft for C.160/C.200 Gearbox Gearbox Gearbox Gearbox

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Exploded view of gear unit 302421 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 14 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts (continued) Exploded view of gear unit 302421 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200 Gear box for C.160/C.200 Gear box for C.160/C.200 Gear box for C.160/C.200 Gear box for C.160/C.200 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 15 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts (continued)Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Part number 30861 Parts for C.400/B.400 30861 46115WGoelfakrin1g2®5/HCPF,S5®.2/1G:1E,As®haGfrtinØd7e5r fPoarrmtsa-xG. 9ea0rkBWoxCP.4a0r0ts-UNI. 302422 Gear housing, belt pulley Gear housing, worm Drive shaft 19 teeth Ø75WDorlifvkeinsgh®a/ftCgFeSa®r/5G:2E:1A® Grinder Parts - Gear Box Parts Toothed wheel 99 teethParts for C.250 Part number 45087Gear 75 HP 4.4:1, shaft 060 for C.250- UNI, C.250-UNI with CFD 45087Driving shaft 19 teeth 30943Driving shaft 30944Toothed wheel 84 teeth 30945Gear housing, internal part 35677Gear housing, external part 30947Parts for C.160/200 Part number 30860/316489Gear 30/40 HP 3.2:1, shaft 045 for C.160 UNI/C.200 UNI 30860Pinion shaft 14 TD 30286Driving shaft gear 3.2:1 30245Toothed wheel 45 TDGearbox 30HP outer part 30295Shaft without air for driving shaft 30245 30410 315567 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 16 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts (continued) Special gear box for C.250 Partno. 312879Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Gear box for C.160/C.200Gear box for C.160/C.200Gear box for C.160/C.200Gear box for C.160/C.200Gear box for C.160/C.200Parts for C.250 Part number 312879Gear 75 HP 4.4:1, shaft 060 for C.250- UNI, C.250-UNI with CFD 312879 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 17 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Grinder Parts – Overview of parts for C250/300 UNI Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 18 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts - Overview of parts for C250/300 UNI (continued) Wolfking® / CFS® / GEA® Grinder Parts - Gear Box Parts Part number Qty.Pos. No. Description 101 Cabinet 80400 202 WolfkingC®la/mCFpS® / GEA® Grinder Parts - Gear Box Parts 35330 2 30396 203 Nut for clamp 35317 4 22146 404 Retainer for clamp 30965 4 27874 805 WolfkingFL®eit/gte,CdHFS=b®1o8/lt0GfoErAc®laGmripnder Parts - Gear Box Parts 22310 1606 22034 16 22707 407 Machine shoe 30906 1 35292 108 Stainless steel nut M24 35293 1 35294 109 Set screw M12x25 30186 1 30052 110 Facet washer M12 30053 30021 111 Dead end screw 30189 /30019 30551 112 Lining C.250-L stainless steel 30443 1 26990 112 Lining C.250-S stainless steel 30390 1 30897 112 Lining C.250-S2T stainless steel 30912 31173 /30351 113 Worm C.250-L / UniGrind-L S/S /367446 1 30005 113 Worm C.250-L / UniGrind-L M/S 31177 1 31246 113 Worm C.250-S / UniGrind-S S/S 1 22311 113 Worm C.250-S / UniGrind-S M/S 23063 2 22540 413 Worm C.250-S2T M/S 25679 2 113 Worm C.250-S2T S/S14 Knife housing15 Wrench key16 Key for screw cap17 Screw cap18 Retaining ring19 Pilot bearing20 Nut for pilot bearing(20) Roller bearing(20) Steel bushing for pilot bearing with roller bearing, stainless steel21 Holeplate22 Knife23 Precutter24 Stainless nut M3025 Brass washer, Ø50x30,5x3mm26 Allen MSP M10x1027 Fixed key Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 19 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – Electrical parts Wolfking® / CFS® / GEDAe®sGcrriipntdieornParts - Gear Box Parts Part numberTemperature sensor pipe 14499TemWpeorlfaktiunrge®a/mCpFlSif®ie/rGEA® Grinder Parts - Gear Box Parts 496655Temperature sensor 369708Safety relay 2NO+aux:1ss 200455Safety switch magnetic 10m wire 682208SafeWtyoslfwkiintcgh®R/FCIDFS1®0/mGwEAir®e Grinder Parts - Gear Box Parts 300332Ferrogard Magnetic switch 10m Wire 367768Safety wire Kit 20m (Tripwire,Wire20M,Spring) otmm900-xSafetywirekit Temperature sensor for mixer 369708 Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersQuadroCut knife housing for E. 225 Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® Emulsifiers Ecocut Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] 225www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentemulsifiersmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 20 of 52 Ecocut E.225 Retrofit Kit for

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® / Simo® Type Grinder Parts Wolfking® / CFS® / GEDAe®sGcrriipntdioernParts - Gear Box Parts Part numberMain bearing for MC250/300 2515-38WorWmoSlfhkoinrtg®M/CC2F5S0® / GEA® Grinder Parts - Gear Box Parts 3502-160Lining for MC250/125PF 3501-121Worm Short MC250 part no. 3502-160 Lining for MC250/125PF part no. 3501-121 Main bearing for MC250/300 2515-38 Koncept Tech ApS, Industrivej 6, 4200ESclaogcweultwseEw,.2D.k2eo5nnmRcaeertkrpoPttfheitocKnheit.:cf+oo4mr5W7o02lf7k1in4g1®0 E/ -mail: [email protected] CFS® / GEA® EmulsifiersAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Ecocut 225Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Peagme 2u1 olfs5i2fiers

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – AutoGrind 280Wolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsWolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsWolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsBearing housing for AutoGrind 280, 389117 Bearing housing for AutoGrind 280, 389117Ecocut E.225 Retrofit Kit forWolfking® / CFS® / GEA® Ecocut E.225 Retrofit Kit forEmulsifiersQuadroCut knife housing for E. Wolfking® / CFS® / GEA®225 Bushing for pilot bearing for AutoGrind 280, 452403 EmulsifiersQuadroCut knife housing for E. Ecocut E.225 Retrofit Kit for Wolfkin22g5®Ecocut E.225 Retrofit Kit for / CFS® / GEA® EmulsifiersQuadroCut knife housing for E. 225Wolfking® / CFS® / GEA® Emulsifiers Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EcocutEcocut E.225 Retrofit Kit for Wolfking®E/mulsifiers 225 emulsifiersRing for AutoGrind 280, 389113 CFS® / GEA® Emulsifiers Ring for AutoGrind 280, 389115 Ecocut E.225 Retrofit Kit for Wolfking® / CAFSu®to/Grind 280 Ecocut Ecocut 2Pa2rt 5nu2m2be5rEceocmut Eu.2l2s5iRfeiterorfitsKit GEA® EmBeualsriinfigerHsoQuuasdinrogCut emulsifiers 389117 for Wolfking® / CFS® /EcokcniufethEou.s2in2Bg5ufosRrhEe.int2r2go5ffoitr Kpiiltoftobrearing 452403 GEA®Wolfking® R/inCgFS® / GEA® 389113EmulsifiersRQiunagdroCut knife housing for E. 389E1c1o5cut EE.m22u5lsRifeietrrosfQiutaKdriotCfuot krnife225 Ecocut E.H2o2u5sRinegtrofit Kit forEcocut E.225 Retrofit Kit for Wol3fk8i9nW1g6o®8lfkinhgo®us/ingCfForSE®. 2/25GEA® WolfkingS®p/riCnFgSf®or/ FGleExAG®rind/sCyFstSe®m/ GEA® EmulsifiersQuadroCu4t k3n0iEf0em98ulsifiersQuadroCut knife housing for E. EmulsifieSrpsring for FlexGrindhosuyssintgefmor E. 225 430202599Ecocut E.22W5eRaeritnrgofritngKiftofrodrrive shaft 361624 Ecocut E.225 Retrofit KitWolfking® D/rCivFeSs®h/afGt EA® 3550877K for Wolfking® / CFS® /Ecocut 225EmulsifiersBQeuaadrrionCgutckanpife housing fEorcEo. cut E.225 Retrofit Kit for Wo3lf5k5inE0g5co®27cut EG.2E2A5® ERmeturlosiffiiteKrsit for225 Pilot bearing / CFS® / GEA® EmulsifiersQuadroCu4t k5n2iWf4e 0o2lfking® / CFS® / GEA®Koncept Tech ApS, Industrivej 6,h4o2u0si0ngSfolargEe. 2ls2e5, Denmark Phone: + 45 7027E1m41u0lEsi-fmiearils: [email protected]. emulsifiers Ecocut 225www.koncepttech.com 225All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,emulsifiersSeydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noEcocut E.225 Retrofit Kitassociation or affiliation with any entities/ companies listed. Page 22 of 52 for Wolfking® / CFS® / GEA® EmulsifiersQuadroCut Ecocut E.225 Retrofit Kit

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Grinder Parts – AutoGrind 280Wolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsWoMlfkaining®be/aCrFinSg®s/hGafEtAf®orGAriuntdoegrriPnadrt2s8-0Gpeaarrt BnuoxmPbaerrts317557 /5000317557 Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersQuadroCut knife housing for E. 225Wolfking® / CFS® / GEA® Grinder Parts - Gear Box PartsDescription Part numberEcocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersMain bearing shaft for Autogrind 280 317557 /5000317557Ecocut 225 emulsifiersEcocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersQuadroCutknife housing for E. 225Ecocut E.225 Retrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersQuadroCutknife housing for E. 225 Shown from worm/auger side - Main bearing shaft for Autogrind 280 part number 317557 /5000317557 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 23 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Grinder Parts Emulsifier Parts - Ecocut E.225Emulsifier Ecocut E.225 E-mulsKinfiiefrePhaorutssi-nEgcsocut E.225 - Pilot bearings - QuadroCut: EmulsifieroPar4tsd-oEucbolecuktnEif.e22se5ts o 3 holeplates and o 4 knives E-mulsBiefiletrpPuallretsys- Ecocut E.225 - Pulleys - Machine shoes - Accessory trolleysQuadroCut knife housing for E. 225Ecocut E.225 Retrofit Kit forWolfking® / CFS® / GEA®EmulsifiersQuadroCut knife housing for E.225Ecocut E.225 Retrofit Kit forWolfking® / CFS® / GEA®Emulsifiers Ecocut 225 emulsifiersInlet pipe for EcoCut 225, 369888 EcKfoonrcifQeuuhtaodEurso.i2Cnug2ts52h2aRf5t etrofit Kit for Wolfking® / CFS® / GEA® EmulsifiersQuadroCut knife housing for E.Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone2:2+5Kn4if5e h7o0u2si7n1g4sh1a0ftE-mail: [email protected] www.koncepttech.cfoormQuadroCut 225All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. AllEcocut E.225 Retrofit Kit fororiginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Knife housing shaftPoss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noWolfking® / CFS® / GEA®association or affiliation with any entities/ companies listed.for QuadroCut 225Page 24 of 52EmulsifiersQuadroCut knife housing for E.225

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Grinder Parts Emulsifier Parts - Ecocut E.225 Emulsifier Parts - Ecocut E.225 Emulsifier Parts - Ecocut E.225 Emulsifier Parts - Ecocut E.225 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 25 of 52

Follow Koncept Tech on LinkedIn Part number Follow scansteel foodtech on LinkedIn 311453 Wolfking® / CFS® / GEA® Emulsifier Parts - Ecocut E.225 311449 304579 Emulsifier Parts - Ecocut E.225 312793 301935 Parts for EcoCut E.225 46473 38118NutEfmoruDlsrifivieerhPuabrtMs -2E7cxo2cut E.225 38121Nut for Drive hub M45x2Ribbon for Wear ring 317563Inlet pipe Wear ring 369888KnifEemhuolusisfiinegr Pwaeratsr -riEncgocut E.225 308583Spring for Outlet knife 305151Rotating Seal ring 26590Stationary Seal ring 311450Inlet pipe with Ribs ( 2pcs. clamp fitting, 1 pcs ext.threads) SS 311452Inlet pipe with Ribs ( 1pcs. clamp fitting, 1 pcs ext./internal threads) SS 311451Splined Output shaftInlet shaft for Main bearingWear ring for Inlet shaftNut for Drive hubDrive hub for second knifeHub for knife set Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 26 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Emulsifier Parts - Ecocut E.225 Electrical partsEmulsifier Parts - Ecocut E.225Emulsifier Parts - Ecocut E.225 Part number Description for electrical parts 14499 46607EmTuelsmifpieerrPataurtrse -sEecnosocur tpEip.2e25 14321 Pressure transmitter Safety lock switch 10m wire 367768 Ferrogard Magnetic switch 10m Wire otmm900-xSafetywirekit Safety wire Kit 20m (Tripwire,Wire20M,Spring) wkgr900-PT100xKP5452656-4 PT 100 Sensor with flangePT 100 sensor with clamp wkgr900-PT100xKP5452656-4Wolfking® / CFS® / GEA® Mixers & Mixer/ Grinders PartsQuadroCut 225 cassette systemKoncept Tech ApS, IndustrivejW6,o4lf2k0i0ngS®la/geClFsSe®, D/eGnmEAa®rk/PMhoinxee:rs+&45M70ix2e7r1/410 E-mail: [email protected] Grinders Parwtsww.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noWolfking® / CFS® / GEA® Mixers & Mixerassociation or affiliation with any entities/ companies listed. Page 27 of 52/ Grinders PartsQuadroCut 225 cassette system

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Emulsifier Parts - Ecocut E.225 Emulsifier Parts - Ecocut E.225 Emulsifier Parts - Ecocut E.225The scansteel foodtech QuadroCut 225 retrofit kit for Wolfking®/ CFS®/ GEA® emulsifiers, typeEcoEcmuutlEsi.f2ie2r5P,aurtpsg-raEcdoecsuytoEu.2r2e5xisting emulsifier to be capable of running productionwith a knife set consisting of three holeplates and four knives.The scansteel foodtech QuadroCut 225 retrofit kit is fully adaptable to your existingWolfking®/CFS®/GEA® emulsifier, type Ecocut E.225. Knife housing shaft for QuadroCut 225 Knife housing shaft for QuadroCut 225 Knife housing shaft for QuadroCut 225QuadroCut 225 cassette system Knife housing shaft for QuadroCut 225 QuadroCut 225 cassette system and QaudroCut 225 knife housing QuadroCut 225 cassette system and QaudroCut 225 knife housingWolfking® / CFS® /GEA® Mixers & Mixer / QuadroCut 225 cassette system and QaudroCut 225 knife housingGrinders PartsQuadroCut225 cassette system Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koQnucaderpoCtutet 2c2h5.ccaossmette system and QaudroCut 225 knife housingAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentWolfking® / CFS® / GEA®/manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Mixers & Mixer / GrindersSeydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed.Parts Page 28 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Emulsifier Parts – Quadrocut 225/ Ecocut E.225Parts needed for Quadro Cut set-up Emulsifier Parts - Ecocut E.225Position Part Description Qty. NeededNo. NumberEm1ulsifier Par3ts1-1E4c5o1cQut ED.2ri2v5ing Hub 1st knife set for QuadroCut 1 12 311452Q Driving Hub 2nd knife set for QuadroCut 1 13 311452 Driving Hub 3rd knife set for QuadroCut 3 2Em4ulsifier Pa3rt1s1-4E5c3ocut EN.2u2t5for driving hub M27x2 w=15 5 311549 Nut for driving hub M45x2 w=96 311450 Nut for driving hub M48x2 b=9 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 29 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders PartsWolfking® /WCFeSs®u/pGplEyAp®aMrtsixfeorrs t&heMfioxlelor w/ GinrginMdeixrserPsartsWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders PaTrwtsin Shaft Mixers,VacuumWolfking® brand name: CFS® brand name: GEA® brand name: XWolfking ® Twin Shaft Mixer Vacuum, TSMV 400 X GEA® UniMix V 1000Wolfking® /WCFoSlf®ki/nGgE®AT®wMinixSehrasf&t MMixixeerrV/aGcuriunmde,rTsSPMarVts850 CFS® UniMix V 1000 GEA® UniMix V 1500 Wolfking ® Twin Shaft Mixer Vacuum, TSMV 1250 CFS® UniMix V 1500 GEA® UniMix V 2000 GEA® UniMix V 2500Wolfking ® Twin Shaft Mixer Vacuum, TSMV 1750 CFS® UniMix V 2000 GEA® UniMix V 3000 GEA® UniMix V 3500Wolfking ® Twin Shaft Mixer Vacuum , TSMV 2250 CFS® UniMix V 2500 GEA® UniMix V 5000Wolfking ® Twin Shaft Mixer Vacuum, TSMV 2750 CFS® UniMix V 3000Wolfking ® Twin Shaft Mixer Vacuum, TSMV 3250 CFS® UniMix V 3500Wolfking ® Twin Shaft Mixer Vacuum ,TSMV 4250 CFS® UniMix V 5000Wolfking® brand name: Twin Shaft Mixers, Standard GEA® brand name:Wolfking ® Twin Shaft Mixer, TSM 400 CFS® brand name: GEA UniMix 400Wolfking ® Twin Shaft Mixer, TSM 850 CFS UniMix 400 GEA UniMix 1000Wolfking ® Twin Shaft Mixer, TSM 1250 CFS UniMix 1000 GEA UniMix 1500Wolfking ® Twin Shaft Mixer, TSM 1750 CFS UniMix 1500 GEA UniMix 2000Wolfking ® Twin Shaft Mixer, TSM 2250 CFS UniMix 2000 GEA UniMix 2500Wolfking ® Twin Shaft Mixer, TSM 2750 CFS UniMix 2500 GEA UniMix 3000Wolfking ® Twin Shaft Mixer, TSM 3250 CFS UniMix 3000Wolfking ® Twin Shaft Mixer, TSM 4250 CFS UniMix 3500 GEA UniMix 3500 CFS UniMix 5000 GEA UniMix 5000 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 30 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders PartsWolfking® / CSFtaSn®d/aGrdEAM®iMxeirxse,rIsn&terMmixeesrh/inGgrinders PartsWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts Twin Shaft Mixers, IntermeshingWolfking® brand name: CFS® brand name: GEA® brand name: GEA® UniMix I 1000WolfkingW®o/lfCkFinSg® ®/ GTwEAin®SMhaixfet rMs i&xeMr,iIxnetre/rmGerisnhdienrgsTPSaMrtIs1000 CFS® UniMix I 1000 GEA® UniMix I 1500 Wolfking ® Twin Shaft Mixer, Intermeshing TSMI 1500 CFS® UniMix I 1500 GEA® UniMix I 2000 GEA® UniMix I 2500Wolfking ® Twin Shaft Mixer, Intermeshing TSMI 2000 CFS® UniMix I 2000 GEA® UniMix I 3000 GEA® UniMix I 3500Wolfking ® Twin Shaft Mixer, Intermeshing TSMI 2500 CFS® UniMix I 2500 GEA® UniMix I 5000Wolfking ® Twin Shaft Mixer, Intermeshing TSMI 3000 CFS® UniMix I 3000Wolfking ® Twin Shaft Mixer, Intermeshing TSMI 3500 CFS® UniMix I 3500Wolfking ® Twin Shaft Mixer, Intermeshing TSMI 5000 CFS® UniMix I 5000 Twin Shaft Mixers, IntermeshingWolfking® brand name: CFS® brand name: GEA® brand name: GEA® UniMix I 1000Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 1000 CFS® UniMix I 1000 GEA® UniMix I 1500 GEA® UniMix I 2000Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 1500 CFS® UniMix I 1500 GEA® UniMix I 2500 GEA® UniMix I 3000Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 2000 CFS® UniMix I 2000 GEA® UniMix I 3500 GEA® UniMix I 5000Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 2500 CFS® UniMix I 2500Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 3000 CFS® UniMix I 3000Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 3500 CFS® UniMix I 3500Wolfking ® Twin Shaft Mixer, Intermeshing, Vacuum TSMI 5000 CFS® UniMix I 5000 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 31 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders PartsWolfking® /TCypFSe®: T/SGME/AT®SMiVx/eTrsSM& GM/iTxSeMr /I/GTrSinMdIeVr/sTPSaMrtIsG From 400 L – 7250 L - Conical shafts - Shaft sealing setsWolfking® / CFS-® / SGeEaAli®n/gsMfoixredrsis&chMarigxeerg/atGer(isn)ders Parts - Lid sealings - Bearing pin for mixing wingWolfking® / CFS-® / MGEaAc®hiMneixsehrose&s Mixer / Grinders Parts - For mixer/grinder ->As per above and see parts for grindersPart number Description 36290 Conical Shaft 36068 Conical Shaft UniMix 1500 30272 Conical Shaft 30273 Conical Shaft TSM 1500 30276 Conical shaft TSM 600 Conical shaft Ø 100 TSMG 2750 310278 Sealing for discharge gateLid sealing Sealing for discharge gateLid sealing Sealing for discharge gateLid sealingMachine shoes Bearing pin for mixing wing Sealing for discharge gateKoncept Tech ApSL,idInsdeaulsintgrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.com Wolfking® / CFS® / Shaft sealing setAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,GEA® / Simo® TypeHaarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Pump PartsPoss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Machine Page 32 of 52 Shaft sealing setshoes

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts Shaft Sealing blue for WK Mixing wingWolfking® / CFS® / GEA® Mixers & Mixer / Grinders PartsWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders PartsWolfking® / CFS® / GEA® Mixers & Mixer / Grinders Parts Shaft sealing set, 373015 Shaft sealing set, 383727Shaft sealing set Shaft sealing set Part number DescriptionShaft sealing set Ø93 mm. Split model for easy mounting, consisting oShfabftluseealiPnOg sMet 373015 Ø118 mm. Split model for easy mounting, consisting of blue POM 383727Shaft seawlinkgmsext926-xØ93 Shaft sealing kit for Ø93 (1x Glue,2x tools and 7x sealings) consisting wkgr926-xØ118 of blue POM Shaft sealing set Shaft sealing kit for Ø118 (1x Glue,2x tools and 7x sealings) consisting of blue POM Shaft sealing kit for 373015 and 383727 ( 1x Glue, 2x tools and 7x sealings , wkmx926-xØ93+118 Koncept Tech ApSSh,afItnsdeuaslintrgivseetj 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Shaft sealing setHaarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 33 of 52 Shaft sealing set

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders Parts / Mixing Wing seal assemblyWolfking® / CFS® / GEA® Mixers & Mixer / Grinders PartsWolfking® / CFS® / GEA®/ Mixers & Mixer / Grinders PartsWolfking® / CFS® / GEA® Mixers & Mixer / Grinders Parts Mixing Wing seal assemblyPos. no. Part number Description01 34006 Screw cap02 33556 Tightening hose Ø10003 33557 /383727 Shaft seal04 26621 Pin 18/8 5x1005 33554 House06 33553 Bushing Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 34 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® / Simo® Type Pump Parts Please press Simo® Type Pumps Model 200, 250, 290 ctrl+click toWolfking® / CFS® / GEA® / Simo® Type Pump Parts view part numbers atWolfking® / CFS® / GEA® / Simo® Type Pump Parts our Parts PortalDescription Part number DC 200 Part number DC 250 Part number DC 290Wolfking® / CDFrSi®ve/hGuEbA® / Simo® Type Pump Parts 0120-89 0120-285 0120-934 0120-212H 0120-236HStaybolt 0120-87H 0120-202H 0120-202H 0120-199H 012ctrl0-247HNut for staybolt 0120-463 0120-293H 0120-385H 0120-296H 0120-297HImpeller ( 1 set = 7 pcs.) 0120-75H 0120-101 0120-145Wear plate, lining end 0120-292H N/A 0120-0145Pur 290xUnbraco16x200Wear plate, bearing end 0120-295H xallenm16x160 0120-204 0120-139HCenter cam 0120-76 0120-664H 0120-211HCenter cam HD pur/steel N/A 0120-600 0120-639 25001 25004Allen screw otmm901-xm16x130Pump Housing 0120-71Axle Journal 0120-251HPump Worm 0120-649Gear Pump housings 200, 250 and 290 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] wwwP.ukmopnhcoeuspintgtse2c0h0,.c25o0mand 290All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept TePcuh mApps, hanodunsoitnthgeso2rig0in0a,l 2eq5u0ipmaenndt m2a9nu0facturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 35 of 52 Pump housings 200, 250 and 290

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® / Simo® Type Pump Parts (continued)Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® / Simo® Type Pump PartsWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® / Simo® Type Pump Parts Center Cam for 290, 250 and 200Wolfking® / CFS® / GEA® Contiflow Pump – 250C&entVeraCnaempfuorm29p0,S2F50&anDdF2W00 olfking® / CFS® / GEA® / Simo® Type Pump Parts Allen screw Drive hub Center Cam for 290, 250 and 200 Axle Journal Axle Journal Center Cam for 290, 250 and 200 Axle Journal Axle JournalImpellers for 290, 250 and 200 Axle Journal Axle JournalImpellers for 290, 250 and 200 Axle Journal Axle Journal Center Cam HD for 290,pur/steel Pur/Steeland 200Impellers for 290, 250 and 200 Axle JournalImpellers for 290, 250 and 200 Axle Journal Wear plate, bearing end Stay bolt for drive hub Wear plate, lining endWolfkiKnogn®ce/ptCTFeSc®h /ApS, Industrivej 6, 4200 SWlaogelflksein, gD®en/mCaFrkS®Ph/onGeE:A+®45/ 70271410 E-mail: partsW@ekoanrcpelpatttec, hb.ecoamring end Simwow® wTy.kpoenPcuemptptePcha.rctsomGEA® / Simo® TypePump Parts Wear Wear plate, lining endAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Wear plate, bearing endSeydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,plate, lining endPoss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed. Page 36 of 52 Wolfking® / CFS® / GEA® / Simo®Wolfking® / CFS® / GEA® Type Pump Parts Wear plate, bearing end

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® / Simo® Type Pump Parts ( continued )Wolfking® / CFS® / GEA® / Simo® Type Pump PartsWolfking® / CFS® / GEA® / Simo® Type Pump PartsWolfking® / CFS® / GEA® / Simo® Type Pump Parts Pump worm for 290 Pump,0120-639 Wear plate, bearing end Wear plate, bearing end Wear plate, bearing endStay bolt for pump housing, 0120-279Wear plate, bearing endWear plate, bearing endWear plate, bearing end Front cover for Pump, 0120-233 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 702W71e41a0r pEl-amteai,l:[email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. AllWear plate, bearing endoriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 37 of 52 Wear plate, bearing end

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machineWolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machine Parts available for Mechanical Deboning Machine types:RecoScreen (deboner): Type RS 100 and Type RS 150Wolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machineFilter types: Slit Filter Hole Filter 0.4 / 0.25 mm 3.00 mmWolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machine 0.5 mm 3.25 mm 0.6 mm 4.00 mm 0.8 mm 5.25 mmOther parts: Screw ConePumps: Slit filter for Reco screenType DC 200 (see pump section for details) Type DC 250 (see Wolfking® / CFS® / GEA® /pump section for details) Simo® Type Pump Parts Wear plate, lining end Wolfking® / CFS® / GEA® / Simo® Type Pump Parts Wolfking® / CFS® / GEA® Contiflow Pump – 250 & Slit and hole filter for Reco screen Vanepump SF &WDorFmWfoor Rlfekcoinscgre®en/ CFS® / GEA® / Simo® Type Pump Parts Wear plate, lining endWolfking® / CFS® / GEA® / Wolfking® / CFS® / GEA® / Simo®Simo® Type Pump Parts Type Pump Parts Wear plate,Wear plate, lining end Wolfking® /linCiFnSg®en/dGEA® / Simo® Type Pump Parts Wear plate, lining endKonWceoplftkTinecgh® A/pCSF,SI®nd/uGstEriAve®j /6,S4im20o0®Slagwelwsew, D.keonnmcaerkpPttheocnhe.:c+o4m5 70271410 E-mail: [email protected] Simo® Type Wolfking® / CFS® / GEA® /Type Pump Parts Pump PartsAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed.Wolfking® / CFS® / GEA® Page 38 of 52 Wolfking® / CFS® / GEA® ContiflowContiflow Pump – 250 & Pump – 250 & Vanepump SF &Vanepump SF & DFWolfking® / DFWolfking® / CFS® / GEA® / Simo®

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machineWolfking® / CFS® / GEA® Recoscreen – Mechanical deboning machineRecoscreen 100 Description Part number 1402-235Wolfking® / CSFliSt®fil/teGrEA® Recoscreen – Mecha0n,i4cal deboning machine 1402-191 1402-197Slit filter 0,25-0,4 1402-190 1402-313Slit filter 0,5 1402-248 1402-247Slit filter 0,4-0,5 1402-246 1402-59Wolfking® / CSFliSt®fil/teGrEA® Recoscreen – Mecha0n,i5c-a0l,d6e5boning machine 1402-60 1402-61Slit filter 0,25-0,5 1402-197 1402-276Hole filter Ø1,2Hole filter Ø2-3Hole filter Ø2.0Hole filter Ø3.0Hole filter Ø4.0Worm/Auger Three flightWorm/Auger Single flightRecoscreen 150 Description Part numberSlit filter 0,25-0,4 1402-193Slit filter 0,25-0,5 1402-192Slit filter 0,7-0,5 1402-201Slit filter 0,5 1402-198Slit filter 0,6 1402-243Slit filter 0,8 1402-187Slit filter 0,9 1402-250Slit filter 1,0-3,0 1402-297Worm/Auger Single flight 1402-209Worm/Auger Single flight 1402-300Worm/Auger (SEW) Three flight 1402-255Worm/Auger Three flight 1402-270 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 39 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Contiflow PumpWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFDescription Part number PositionMounting Knife Housing 30442 1Retaining device 30966 2Threaded piece 30508 3Flange bearing 778 JF 22x6 25344 4Handle 30510 5Ball PS40-M10 24936 6Pin 30509 7Seeger ring 24986 8Hinged pin 30507 9Key 14x15x37 AB for suction/pressure gate 30883 10Allen MC 6x12x 22605 11Bushing for drive hub Ø120xØ110x49 30673 12Axial bearing Ø170xxØ130x5 30380 13Bushing for suction gate Ø130xØ120x53 30381 14Key for mounting knife housing 30717 15Allen MC 8x35 22622 16Key for pump housing 32855 17Bushing for pressure gate Ø110xØ100x46 30379 18Bushing for part of driving hub Ø100xØ90x46 30672 19Loose pallet (1set=4 pcs. ) 34468 20Bearing for worm Contiflow Pump 37113Pallet Inserts for CFD Front/back metal 34469Part of drive hub 35594Wear ring pressure gate for CFD 250 35765Wear ring for suction gate CFD 250 35545 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 40 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInWolfking® / CFS® / GEA® Contiflow Pump-250 & Vanepump SF &DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF Part no. Position Description 32850 /35548 Pump housing for CFD pump 16 M3 32851 Pump housing for CFD pump 14 M3 32852Wolfking® / CPFuSm®p/hGoEuAs®inCgofnotrifCloFwD pPuummpp 1–22M503& Vanepump SF & DF 32853 Pump housing for CFD pump 10 M3 37597 Pump housing for CFD pump 20M3 30622Wolfking® / CTFruSs®t/coGlElaAr®foCroCnFtiDflo2w50Pump – 250 & Vanepump SF & DF 37697 Loose insert in Metal ( 1 set=4 pcs. ) 30569 /317627 Rear hub 30568 /317866 Front hubMetal insert for pallets ( set=4pcs.), 37697 PalletWolfking® / CFS® / GEA® Recoscreen – Wolfking® /Mechanical deboning machineImpellers CFS® / GEA®and inserts for impellers Recoscreen – Mechanical Plastic insert for pallets (set=4pcs.) 34468 deboningWolfking® / CFS® / GEA® Recoscreen – machineImpellMechanical deboning machine Pallets for ContiFlow, (seet=rs2apncds.)in3s8e5rt4s6 for impellersWolfking® / CFS® / GEA® Recoscreen – Wolfking® / CFS® / GEA® Recoscreen –MeWchoalfnkicnagl®d/eCbFoSn®in/gGmEaAc®hRineecIomspcerelleerns –anMd iencsheratnsifcoarlidmepbeollneirnsg machineImpellers and Mechanical deboning mWaoclhfkininegI®m/pellers and inserts for impellers CFS® / GEA® inserts for impellers Recoscreen –Various ContiFlow 250 Pump parts Mechanical Side plate/pressure padrteCbFoDni,nSgSWolfkingK®on/cCepFtST®ec/hGAEpAS®, InRdeucsotrsivcerje6e, n42–00 Wolfking® / CFS® / GEA®mReaccohsincereen –MeWcohlafkniincga®l /deCbFSo®ni/nGgEmA®acRheicnoesIcmrepeenlle–rs Slagelse, Denmark Phone: + M45e7c0h2a7n1ic4a1l0dEe-bmoanili:[email protected] www.koncepttech.comanMd iVencashreiarontusiscfaoClrodinmetbipFoelnolliwenrg2sm50aPchuimnep partsAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment Various ContiFlow 250WPuomlfpkipnagr®ts/manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,CFS® / GEA®Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Wolfking® / CFS® / GEA® Recoscreen –Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed. Page 41 of 52 Mechanical deboning mRaecchoisncereImenpe–llers and inserts for impellers MechanicalWolfking® / CFS® / GEA® Recoscreen – Various ContiFlow 250dPeubmopnipnagrtsMechanical deboning machineImpellers andinsVearrtisofuosrCimonpteiFllleorws 250 Pump parts

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Wolfking® / CFS® / GEA® Contiflow Pump-250 & Vanepump SF &DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DFWolfking® / CFS® / GEA® Contiflow Pump – 250 & Vanepump SF & DF Part of drive hub 35594Rear hub for contiflow pump 30569 /317627 Various ContiFlow 250 Pump partsVarious ContiFlow 250 Pump parts Various ContiFlow 250 Pump partsVarious ContiFlow 250 Pump parts Various ContiFlow 250 Pump partsVarious ContiFlow 250 Pump parts V Vari V VaariouosusContiVFlowa250 Pump parts DVarirvioeuhsuCbowntitiFhlopwall2e5t 0syPsutemmp parts orCoFtnsuiil tCo2VoCuaroPmspnsii5uawoFpr0lnt oruasContii onroFustCiilKoncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] woAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentFlmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,2 w 2Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. AllVarious ContiFlow 250 Pump parts ooriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,5 2 5Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noPage0Pu42 w502of 52 P05 Pu0association or affiliation with any entities/ companies listed.

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn Cozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsPosition numbers Cozzini Part number Descriptionfor Cozzini Pump CVP3X002 Housing pump 1 CVP3X021 Pump cover 2 CVP3X006 Cam 3 CVP3X012 Cover bushing 4 CVP3X016 Wear liner 5 CVP3X028 Thrust washer 6 CVP3X034 Vane set 7 CVP3X037 Rotor 8 07-001-0010 Bushings 9 98-SPX9P113B Thrust washer 10 98-SPX9P111B Pump drive shaft 11 11-005-0111 Clamp 12 CVP3X022 Hinge pump and cover 13 CVP3X025 Adaptor hinge 14 FNC10142 Hex Bolt -3 8-16 NC - 5 NC 15 FNC04065 Hex Nut Nylon Insert 3 8 - 16 NC 16 03-012-1759 Hex Bolt -3 8-16 UNC - 0.75 NC 17 12-001-0001 O RING 18 03-012-1759 Socket Bolt -3 8-16 NC - .75 NC 19 03-012-1752 Socket Bolt -3 8-16 NC - 1.5 NC 20 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 43 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInCozzini® Type Pump Parts (continued)Cozzini® Type Pump Parts Full range of spare and wear parts for Cozzini® pumps – Feel free to send us your parts number list plus the pump type/model name in order for us to provide you with our quotationCozzini® Type Pump PartsCozzini® TypeCaPmuhmeaprtPshaarptesd Full range of spare and wear parts for Cozzini® pumps – Feel free to Bushing send us your parts number list plus the pump type/model name in order for us to provide you with our quotationNew Machines – Newwww.scansteelfoodte Machines – www.scansch.comØ400 knife Fhouulslinrag nge of spare and wear parts for Cozzini® pumps – Feel free to teelfoodtec h.comØ400refurbished send us your parts number list plus the pump type/model name in order for us to provide you with our quotation Pump Rotor knife housing refurbishedNew Machines –www.scansteelfoodtech.com Full range of spare and wear partsNfeowr Cozzini® pumps – Feel free to New send us your parts number wlisitthpoluuMsr qtahuceohtpianuteimosnp–type/model name in Machines – Vane set order for us to provide you Wear Linwerww.scans www.scanste teelfoodtec h.comNew Machines – elfoodtech.c New Machines – www.scansteelfoodtewww.scansteelfoodte omØ400 knife ch.comNØe4w00 knife housingch.coNmeØw400Mknaifcehhoinuseinsg – housing refurbished refurbishedrefurbiswhewd w.scansteelfoodte Machines –ch.comØ400 knife housing refurbished New Machines –New Machines –www.scansteelfoodte www.scanste www.scansch.coNmeØw400Mknaifcehhoinuseinsg – elfoodtech.c New Mteaeclhfoinoedste–crefurbiswhewd w.scansteelfoodte om www.hsc.caonmstØe4e0l0foodte ch.com knife housingExample of Cozzini® type pump. For complete new scansteel pumpcsh, .pcleoamrsefeurabisshkedscansteel foodtech for a quote for our scansteel foodtech pump NewNew Machines – Machines – New MNaecwhines –www.scansteelfoodte www.scanste www.Mscacnhstineeslfo–odtech.comØ400 knife housing elfoodtech.c ch.comwØw40w0.ksncifae nhosusingRKeofuncrrebfpiustrhbTimsehceehdnAtpsSa, nIndduEsxtrcivheaj n6,g4e200 Slagwelwsew, D.keonnmocamerkØp4Ptt0he0ocknnheif.e:c+o4m5 70271410 E-mail: [email protected] refurbishteedelfoodtec housing refurbishedPartsExample of Cozzini® type h.comØ400All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,pump. knife housingHaarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,New Machines – refurbishedSeydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,New Machines –Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has nowww.scansteelfoodteassociation or affiliation with any entities/ companies listed. PagNe e4w4 of 52 www.scansteelfoodtech.comØ400 knife housing Machines – ch.comØ400 knife housingrefurbished www.scanste refurbished

Follow Koncept Tech on LinkedIn Bonfiglioli Gear box Follow scansteel foodtech on LinkedIn scgr320-MG400xPos.36 Cozzini® Type Cozzini® 400 GearCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump Parts Parts for Cozzini® 400 Bonfiglioli Shaft gear box type TA 125-125/DCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump PartsCozzini® Type Pump Parts Bonfiglioli shaft gear box type TA 125-125/D Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 45 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInRefurbishments and Exchange Parts Refurbishments and Exchange PartsRefurbishments and EFxochr aanllgwe oPramrtss/augers, linings, knife housings, and gear boxes we are able to supply you with a repair service. You send us the part that needs refurbishment and we return the refurbished part to you. Furthermore, we also offer you the possibility to get an extra 15% discount when buying new parts! This discount will be obtained when you return your old worm/auger, lining, knife housing, or gearbox.Refurbishments and Exchange PartsRefurbishments and Exchange PartsRefurbishments and EFxochr aanllgwe oPramrtss/augers, linings, knife housings, and gear boxes we are able to supply you witha repair service. You send us the part that needs refurbishment and we return therefurbished part to you. Furthermore, we also offer you the possibility to get an extra 15%discount when buying new parts! This discount will be obtained when you return your oldworm/auger, lining, knife housing, or gear box.Ø400 knife housing refurbished David Brown Gearbox for C.400/B.400-UNI/Heavy Duty Gear box for C.400 refurbishedNew MRacehinfeusr–bishments and Exchange Parts Gear box for C.400 refurbishedwww.scansteelfoodtercehfu.rcboishmedFaØo4r0re0apklanliifwre shooerurmsviniscg/ea.uYgoeurss,elnindinugss,thkenipfearhtotuhsaitnngse,eadnsdregfeuarrbbisohxmesenwteaanrdewaebGlereaerttbouorxsnufoptrhCpe.l4y00yoreufurwbiisthhed refurbished part to you. Furthermore, we also offer you the possibility to get an extra 15%discount when buying new parts! This discount will be obtained when you return your old worm/auger, lining, knife housing, or gear box. Gear box for C.400 refurbishedNew Machines –www.scansteelfoodtech.com Refurbishments and Exchange PartsDavid Brown Gearbox for C.400/B.400-UNI/Heavy DutyNew MFaocrhainllews o–rms/augers, linings, knife housings, and gear boxes we are able to supply you withwww.scaarnesptaeier lsfeorovdictee. You send us the part that needs refurbishment and we return the refurbished part to you. Furthermore, we also offer you the possibility to get an extra 15%ch.comdØi4s0c0okuninfethwouhsinegn bBueyfoirnegrenfuerbwishpmaerntts! This discount will bAeftoerbrteafuirnbeisdhmwenhten you return your oldrefurbished worm/auger, lining, knife housing, or gear box.New Machines –Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comch.comØ400 knife housingAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,refurbishedHaarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® typDe,aMviindceBmraostwer®ntyGpee,aArNbCoOx® ftyopre,CC.o4z0zin0i®/Bty.p4e0, W0-oUlfkNingI®/Htyepea,vCyomDvuaitr®y type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 46 of 52 David Brown Gearbox for David Brown Gearbox for

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInRefurbishments and Exchange PartsRefurbishments and Exchange PartsRefurbishments and Exchange PartsRefurbishments and Exchange Parts Refurbished cruscher shaft Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 47 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedIn New Machines – www.scansteelfoodtech.comNew Machines – www.scansteelfoodtech.comNew Machines – www.scansteelfoodtech.comNew MacThHinEesS–CAwNwSwT.sEcEanLsFteOeOlfoDoTdEtCecHh.GcoRmOUP – www.scansteelfoodtech.com - Suppliers of our own manufactured grinders, mixers, vacuum mixers, mixer/grinders, pumps, emulsifiers, silos, conveyors, as well as complete processing lines. - scansteel foodtech Group is among the World's most innovative manufacturers of food preparation machinery, equipment, and complete processing lines and solutions for the global food processing industry. The main focus is on the global meat, poultry, and cheese processing industries, as well as on the global pet food, rendering, and fur industry. THE SCANSTEEL FOODTECH GROUP – www.scansteelfoodtech.com - Suppliers of our own manufactured grinders, mixers, vacuum mixers, mixer/grinders, pumps, emulsifiers, silos, conveyors, as well as complete processing lines. - scansteel foodtech Group is among the World's most innovative manufacturers of food preparation machinery, equipment, and complete processing lines and solutions for the global food processing industry. The main focus is on the global meat, poultry, and cheese processing industries, as well as on the global pet food, rendering, and fur industry. THE SCANSTEEL FOODTECH GROUP – www.scansteelfoodtech.com - Suppliers of our own manufactured grinders, mixers, vacuum mixers, mixer/grinders, pumps, emulsifiers, silos, conveyors, as well as complete processing lines. - scansteel foodtech Group is among the World's most innovative manufacturers of food preparation machinery, equipment, and complete processing lines and solutions for the global food processing Konicnedput sTtercyh. TAhpeS,mInadiunsftorivceujs6i,s4o2n00thSelaggleolsbea,lDmeenmata,rpkoPuhlotrnye,:a+n4d5c7h0e2e7s1e41p0roEc-emsasiiln: pgairntsd@usktorniecse,pattsecwhe.clol mas on the global pet food, rendering, and wfuwr win.dkuosntrcye.pttech.com All items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipment manufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®, Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. All original equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type, Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®, Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has no association or affiliation with any entities/ companies listed. Page 48 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInMeet our Global TeamNew Machines – www.scansteelfoodtech.com Robert Holst Denmark Sales and parts shippingUsed Machines – www.koncepttech.com/used-macwhwiwn.keosncepttech.com Tel: +45 20 38 68 64 Fax: +45 70 27 14 11 E-mail: [email protected] Helle Friis Olsen Sales and global agent support Tel: +45 21 28 27 85 E-mail: [email protected] Machines – www.koncepttech.com/used-machinesMeet our Global Team Mr. Kim Jensen Tel.: + 45 98 43 05 66 Denmark Fax.: + 45 98 43 59 77 (Fur Industry) E-mail: [email protected] Machines – www.scansteelfoodtech.comUkraine, Russia Ms. Tatjana Jensen (Fur Industry) Russian/English/Finnish/Danish: Tel: +45 2019 5666Mexico E-mail: [email protected] Mr. Kaj Jensen English/German/Danish: Tel: +45 9843 1166 E-mail: [email protected] Sr. Jose Luis Malagon Phone: (044 81) 82 53 03 90 E-Mail: [email protected] Mrs. Marta Staniszewska E-mail: [email protected] www.premac.pl Tel: +48 531 464 264 Mr. Wojciech Nawrocki E-mail: [email protected] E-Mail: [email protected] Tel: +48 531 463 475 Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 49 of 52

Follow Koncept Tech on LinkedIn Follow scansteel foodtech on LinkedInMeet our Global TeamNew Machines – www.scansteelfoodtech.com Daglig leder: Mr. Odd Breigutu E-post: [email protected] Phone: +47 22 91 44 03 Mobil: +47 901 88 910Used Machines – www.koncepttech.com/used-machines Salg: Mr. Petter Breigutu Norway E-post: [email protected] www.bokken.no Phone: +47 22 91 44 08 Mobil: +47 908 56 777Used Machines – www.koncepttech.com/used-machinesMeet our Global Team Teknisk:New Machines – www.scansteelfoodtech.com Mr. Bjørn Schjelderup-Roemers E-post: [email protected] Phone: +47 22 91 44 07 Mobil: +47 900 29 998 Managing Director Mr. Charles Parker E-Mail: [email protected] Sales Mr. Aaron Chabino E-Mail: [email protected] Spareparts www.scanamcorp.com Mr. Greg Cole Phone: +1 816-210-5528 E-Mail: [email protected] Grinder/Emulsifier & Tooling Expert Mr. Morten Parmo Phone: +1 614-477-2408 E-Mail: [email protected] Mr. Noel Thomas Selective Sourcing Company phone 965-9967-8493 Email :[email protected] Koncept Tech ApS, Industrivej 6, 4200 Slagelse, Denmark Phone: + 45 70271410 E-mail: [email protected] www.koncepttech.comAll items, parts, and accessories listed on the website of Koncept Tech Aps, are manufactured by Koncept Tech Aps, or manufactured to Koncept Tech Aps, specifications. The names of the original equipmentmanufacturers referred to on this site, such as but not limited to: Carnitech®, Handtmann®, K&G®, Krämer + Grebe®, CFS®, GEA®, Karl Schnell®, KS®, Laska®, Palmia®, Petsmo®, Seydelmann®, Simo®,Haarslev®, Weiler®, Mincemaster®, ANCO®, Cozzini®, Wolfking®, Comvair®, Autio®, Beehive®, Yieldmaster®, Meatmaker®, Poss®, Townsend®, etc., are all registered trademarks of their respective companies. Alloriginal equipment manufacturer's names are listed as Carnitech® type, Handtmann® type, K&G® type, Krämer + Grebe® type, CFS® type, Karl Schnell® type, KS® type, Laska® type, Palmia® type, Petsmo® type,Seydelmann® type, Simo® type, Haarslev® type, Weiler® type, Mincemaster® type, ANCO® type, Cozzini® type, Wolfking® type, Comvair® type, Autio® type, Beehive® type, Yieldmaster® type, Meatmaker® type®,Poss® type, Townsend® type to indicate that these items are manufactured by Koncept Tech Aps, and not the original equipment manufacturers. Unless specifically stated otherwise, Koncept Tech Aps, has noassociation or affiliation with any entities/ companies listed. Page 50 of 52