TNL5850FG-1E4a

Nycolube 5850 FG High Temperature Chain Oil For Food Industry NSF H1 registered for incidental food contactDescription ISO VG 220 AdvantagesNycolube 5850 FG is a high temperature chain oil for • Very good anti-wear performancesthe use in industry where incidental food contact may • High flash pointoccur. It is based on complex neopolyol esters (HX1 • Excellent lubricityapproved) and can be used at operating temperature • Excellent adhesion propertiesup to +240°C max. It contains specific HX-1 additiv es • Low volatility (reduced consumption)and its formulation is registered with H1 requirement • Can stand high temperature (up to 240°C)(available on NSF website • Excellent resistance to cokingwww.nsf.org/USDA/whitebook/whitebook.pdf -) • Certified Star-K Kosher pareveIt will exhibit good coking resistance and lubrication • Certified Halalproperties.ApplicationNycolube 5850 FG is recommended in all applicationswhere performances at high temperature are required,especially in high temperature chain oils in the foodindustry.The selection of a highly oxidation stable esters withappropriate anti-oxidant provides excellent resistance tooxidation and coking. Nycolube 5850 FG isrecommended for high temperature applications, up to240 °C.Characteristic Unit Result Test methodNSF registration number - 143673 -- Appearance - Clear, bright and free from visual sediments and other examination- Colour Gardner - impurities. kg/dm 3 ISO 4630- Density at 20°C 6 (*) ISO 12185 °C ISO 2592- Flash point, COC °C 1.003 ISO 3016 % AS TM D 972- Pour point 260 ISO 3104 mm²/s-Volatility 6h30 at 204 °C mass fraction -42 ISO 2909 -- Kinematic viscosity at 100°C 2.2 TNL5850FG-1E4a 40°C 0°C 26 -10°C 226 -20°C 3480 9345- Viscosity Index 29245 149- Acid number (pH=11) mg KOH/g 1.67 ISO 6619- Foaming at 24°C ml/ml 0/0 ISO 6247- Steel corrosion - conform ISO 7120 A- 4-ball scar diameter 1hour – 392 N mm 0.36 ASTM D 4172- 4 ball welding (welding load) kg 200 ASTM D 2783(*) colour may change from yellow to slightly red with sunlight due to specific additive without affecting performance of the product.The values above are typical values. They do not constitute any contractual commitment.Sales specifications are available on request. The present technical data sheet replaces all the previous editions.