Venfilter-EN-imprenta-2020 02 07 VERSION 20 digital

EPA/HEPA/ULPA 0 Terminal block without INFORMA- regulation replaceable TION Absolute Filtration / Clean Rooms 1 Class: H and U PRE- FILTERS Terminal unit for HEPA / ULPA filters replaceable from Dimensions 2 room. Certification PAINTINGS Technical features BOOTHS Type: Terminal Unit for HEPA / ULPA laminar flow filters. 3 Frame: Extruded and anodized aluminum profile. Fixation: It is installed from the side of the clean room, the repla- COMFORT cement is repositioned and held by means of 4 support springs. PRODUCTS Filtering Element: Incorporates a LAMINARVEN gel seal filter. 4 Separators: Thermoplastic glue beads. Sealant: It is achieved automatically by penetration in its fluid joint in EPA/HEPA the living edge of the box. /ULPA Protective grille: Steel grid at the exit, painted in white epoxy. MPPS Efficiency: 99,995%. 5 EN 1822 Class: H14 - U15. Recommended Final Pressure Pressure Drop: 600 Pa. HIGH Temperature: 80ºC in continuous service. TEMPERA- Advantages TURE - Very light weight and easy to install. 6 - Filter verified and and factory certified. - Ease of filter change from the side of the room. - Terminal or return air filtration in clean rooms. - Air inlet neck available in various diameters. References EQUIP- MENTS Reference Model Dimensions For filters Model Efficiency EN Filter Nominal Initial Unit Weight UxP Stock 7 BxHxP BxHxP (MPPS 1822 surface flow Pa Volume (Kg) ** BTSRR1212/250H14 BTSRR LVGRB E %) Class (m3/h) MOTORS BTSRR1212/250U15 BTSRR LVGRB 99,995 H14 (m2) (m3) 1F AND BTSRR1224/250H14 BTSRR LVGRB 99,995 U15 1F BTSRR1224/250U15 BTSRR 305x305x165 270x270x104 LVGRB 99,995 H14 2,7 150 120 0,03 5,5 1F TURBINES BTSRR2424/250H14 BTSRR 305x305x165 270x270x104 LVGRB 99,995 U15 1F BTSRR2424/250U15 BTSRR 610x305x165 575x270x104 LVGRB 99,995 H14 2,7 150 145 0,03 5,5 1F 8 BTSRR2436/250H14 BTSRR 610x305x165 575x270x104 LVGRB 99,995 U15 1F BTSRR2436/250U15 BTSRR 610x610x165 575x575x104 LVGRB 99,995 H14 5,8 300 120 0,06 8,0 1F ADSOR- BTSRR2448/250H14 BTSRR 610x610x165 575x575x104 LVGRB 99,995 U15 1F TION AND BTSRR2448/250U15 BTSRR 915x610x165 880x575x104 LVGRB 99,995 H14 5,8 300 145 0,06 8,0 1F DESODO- 915x610x165 880x575x104 99,995 U15 1F RIZATION 1220x610x165 1185x575x104 12,6 600 120 0,11 13,5 1220x610x165 1185x575x104 9 12,6 600 145 0,11 13,5 INTER- 19,2 900 120 0,16 19,5 NATONAL NORMATI- 19,2 900 145 0,16 19,5 VE 25,9 1200 120 0,21 26,0 25,9 1200 145 0,21 26,0 *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock Venfilter [email protected] 149 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 EPA/HEPA/ULPA INFORMA- Graphics TION Terminal block without regulation replaceable 1 BTSRR-H14 PRE- FILTERS Initial Pressure Drop(Pa) 190 171 2 152 90 180 270 360 450 540 630 720 810 133 PAINTINGS 114 Airflow rate (m3/h) BOOTHS 95 76 3 57 38 COMFORT 19 PRODUCTS 0 4 0 EPA/HEPA Venfilter [email protected] /ULPA Tel +34 937 862 607 www.venfilter.com 150 Fax +34 937 862 493 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 Microven (MDF) INFORMA- TION Function of Initial Pressure Drop vs. flow rate MCDMP-150 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4250 4 MCDMP-292 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 4250 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 151 INTER- www.venfilter.com NATONAL NORMATI- VE

0 EPA/HEPA/ULPA INFORMA- Graphic TION Microven (Galvanized) 1 Function of Initial Pressure Drop vs. flow rate PRE- MCGVP-150 FILTERS 4250 2 MCGVP-292 PAINTINGS BOOTHS 4250 3 Venfilter COMFORT Tel +34 937 862 607 [email protected] PRODUCTS Fax +34 937 862 493 www.venfilter.com 152 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 Astroven (MDF) INFORMA- TION Function of Initial Pressure Drop vs. flow rate AVDMPH13-150 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4250 4 AVDMPH13-292 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 4250 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 153 INTER- www.venfilter.com NATONAL NORMATI- VE

0 EPA/HEPA/ULPA INFORMA- AVDMPPH13-150 TION 4250 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 AVDMPPH13-292 4250 EPA/HEPA 154 Venfilter [email protected] /ULPA Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 AVDMPH14-150/292 INFORMA- TION AVDMPPH14-150/292 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 155 INTER- www.venfilter.com NATONAL NORMATI- VE

0 EPA/HEPA/ULPA INFORMA- Astroven (Galvanized) TION Function of Initial Pressure Drop vs. flow rate 1 AVGVPH13-150 PRE- 4250 FILTERS AVGVPH13-292 2 4250 PAINTINGS BOOTHS Venfilter 3 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com COMFORT 156 PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 AVGVPPH13-150 INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 34250 COMFORT PRODUCTS AVGVPPH13-292 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 74250 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 157 INTER- www.venfilter.com NATONAL NORMATI- VE

0 EPA/HEPA/ULPA Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- AVGVPH14-150/292 Fax +34 937 862 493 TION AVGVPPH14-150/292 1 158 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 Poliven INFORMA- TION Function of Initial Pressure Drop vs. flow rate PVGV/PV-E10 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4250 4 PVGV/PV-H13/H14 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 4250 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 159 INTER- www.venfilter.com NATONAL NORMATI- VE

0 EPA/HEPA/ULPA [email protected] www.venfilter.com INFORMA- Laminarven 66 mm TION Function of Initial Pressure Drop vs. flow rate 1 LV-66 PRE- LV66 FILTERS Laminarven Plus 90/110 mm 2 Function of Initial Pressure Drop vs. flow rate PAINTINGS LV-90/110-H14 BOOTHS Venfilter 3 Tel +34 937 862 607 160 Fax +34 937 862 493 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 Function of Initial Pressure Drop vs. flow rate INFORMA- LV-90/110-U15 TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 Laminarven 78 mm EPA/HEPA /ULPA Function of Initial Pressure Drop vs. flow rate LV-78 H13 5 LV-78 H13 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 161 INTER- www.venfilter.com NATONAL NORMATI- VE

0 EPA/HEPA/ULPA [email protected] www.venfilter.com INFORMA- Laminarven Gel TION Function of Initial Pressure Drop vs. flow rate 1 LVG-H14 PRE- LVG-U15 FILTERS Venfilter 2 Tel +34 937 862 607 162 Fax +34 937 862 493 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

EPA/HEPA/ULPA 0 Laminarven DM INFORMA- TION Function of Initial Pressure Drop vs. flow rate LVDM-H13 1 LVDM78 H13 PRE- FILTERS Laminarven GV 2 Function of Initial Pressure Drop vs. flow rate LVGV-H13 PAINTINGS BOOTHS LVGV78 H13 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 163 INTER- www.venfilter.com NATONAL NORMATI- VE

0 High temperature Dimensions INFORMA- HT-1000 TION High Temperature Filters 1 Air suction and expulsion in painting cabins up to 300ºC. PRE- FILTERS Technical features 2 Type: Flat fiberglass panel filter for high temperatures. Frame: Galvanized Steel with protective fabric on both sides PAINTINGS or expanded aluminum. BOOTHS Media: Fiberglass with a high efficiency interfacing in the air outlet. 3 Average yield % (Em): 93% Average efficiency % (Am): 98% COMFORT EN 779 Class: G4 and M5. PRODUCTS Recommended Final Pressure Pressure Drop: 250 Pa. Temperature: G4 300ºC, M5 200ºC. 4 References EPA/HEPA /ULPA Reference Dimensions Average Efficiency EN 779 Nominal Initial Unit Weight UxP Stock BxHxP % (Am) Class flow Pa Volume (Kg) * * 5 HT202014 (m3/h) HT242414 480x480x14 93% G4 1000 70 (m3) 0.25 25 S HIGH HT-CM202018 610x610x14 93% G4 1600 70 0.11 0.4 25 F TEMPERA- HT-CM242418 490x490x18 93% G4 1000 70 0.13 0.35 25 S 610x610x18 93% G4 1600 70 0.11 0.5 25 F TURE 0.13 6 HT202014F5 480x480x14 98% M5 350 50 0.11 0.35 25 F HT-CM202018F5 490x490x18 98% M5 350 50 0.13 0.5 25 F EQUIP- MENTS *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 7 Venfilter MOTORS AND 164 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

High temperature Dimensions 0 Certification Quebraven Galvanized INFORMA- High Temperature TION Pre-filtration High Temperature 1 Metallic pre-filter (Galvanized) for the retention of coar- PRE- ser particles in industrial installations and processes with FILTERS a large airflow, high temperatures with reduced spatial area. Silicone free. 2 Technical features PAINTINGS BOOTHS Type: Disposable filter with an uneven surface, zigzag plea- ted, with fiber glassl and a grille on both sides. 3 Frame: Galvanized Steel. Grille: Galvanized metal on one side. COMFORT Media: Fiber glass. PRODUCTS EN 779 Class: G4. Recommended Final Pressure Pressure Drop: 250 Pa. 4 Temperature: 270ºC. References EPA/HEPA /ULPA 5 Reference Dimensions Average EN 779 *ME ISO 16890 Filter Nominal Initial Unit UxP Stock HIGH BxHxP Efficiency Class % surface flow Pa Volume * * TEMPERA- QMHT242404G4 % (Am) 35 Coarse 60% (m3/h) QMHT202404G4 QMHT 592x592x96 G4 Coarse 60% (m2) 110 (m3) 3.5 SL TURE QMHT202004G4 QMHT 592x492x96 G4 35 Coarse 60% 110 0.03 3.3 F QMHT122404G4 QMHT 492x492x96 G4 Coarse 60% 2.2 3400 110 0.028 3.2 F 6 QMHT242402G4 QMHT 592x287x96 G4 Coarse 60% 110 0.023 1.75 F QMHT202402G4 QMHT 592x592x48 G4 Coarse 60% 1.8 2800 100 0.015 2.3 SL QMHT202002G4 QMHT 592x492x48 G4 Coarse 60% 100 0.02 1.7 F QMHT122402G4 QMHT 492x492x48 G4 Coarse 60% 1.5 2500 100 0.014 1.6 F QMHT 592x287x48 G4 100 0.012 1.2 F 1.1 1700 0.01 EQUIP- MENTS 1.1 2000 0.90 1650 7 0.75 1375 MOTORS AND 0.60 1000 TURBINES *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 165 INTER- www.venfilter.com NATONAL NORMATI- VE

0 High temperature INFORMA- Variven HT TION High Temperature Filters 1 Filtration in cabins & Painting Ovens. PRE- FILTERS 2 Technical features Dimensions PAINTINGS Type: Compact filter with High Efficiency for high tempera- VVHTP VVHT BOOTHS tures. Frame: Galvanized Steel. Certification 3 Filtering Element: Fiberglass Paper. Separators: Corrugated aluminum or Fiberglass Strip COMFORT Sealant: Fiberglass PRODUCTS Clamp or flange: Galvanized Steel. Joint: Fiberglass with exterior covering or ceramic. 4 Average efficiency % (Am): 60 Em 80% and 90 Em 95%. EN 779 Class: M6 and F8. EPA/HEPA ISO 16890: ePM10 65% and ePM1 65%. /ULPA Recommended Final Pressure Pressure Drop: 450 Pa. Temperature: Max. in service 250ºC, Max. in beaks 350ºC. 5 VVHTP: With flange or clamp. VVHT: Without flange or clamp. HIGH TEMPERA- Advantages TURE - Silicone Free. 6 References EQUIP- Reference Model Dimensions EN *ME ISO 16890 Filter Nominal Initial Energy Energy Energy Unit Weight UxP S. MENTS BxHxP 779 % VVHTP242412F8 VVHTP Class ePM1 65% surface flow Pa Class Cons. Cons. Volume (Kg) * * 7 VVHTP202412F8 VVHTP ePM1 65% VVHTP122412F8 VVHTP (m2) (m3/h) 16890 kWh/ kWh/ (m3) MOTORS VVHTP122406F8 VVHTP AND VVHTP242412F6 VVHTP **** year year VVHTP202412F6 VVHTP TURBINES VVHTP122412F6 VVHTP 779 16890 VVHTP122406F6 VVHTP 8 * ** ADSOR- 592x592x292 F8 65 12 3400 150 D 2550 1891 0.11 8.2 1 S TION AND 490x592x292 DESODO- 9 2750 D 0.09 7.8 1 F RIZATION 287x592x292 ePM1 65% 6 1700 D 0.05 4.2 1 F 9 287x592x150 592x592x292 ePM1 65% 3 850 D 0.03 2.8 1 F INTER- 490x592x292 NATONAL 287x592x292 M6 ePM10 65% 12 3400 130 E 2000 >1200 0.11 8.2 1 F NORMATI- 287x592x150 ePM10 65% 9 2750 E 0.09 7.8 1 F VE ePM10 65% 6 1700 E 0.05 4.2 1 F ePM10 65% 3 850 E 0.03 2.8 1 F * ME%: Minimum Efficiency EN779: 2012 *UxP *Stock * Energy Consumption kWh / year: Calculated according to Eurovent 4 / 21-2017 guidelines. Units per box F: Manufacturer, S: Stock, SL: Limited Stock ** Energy Consumption kWh / year: Calculated according to Eurovent guidelines. **** Energy class according to Eurovent. Venfilter 166 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com

High temperature 0 References INFORMA- TION Reference Model Dimensions EN 779 *ME ISO 16890 Filter Nominal Initial Unit Weight UxP Stock % surface flow Pa 1 VVHT242412F8 VVHT BxHxP Class ePM1 65% (m3/h) 160 Volume (Kg) * * VVHT122412F8 VVHT ePM1 65% (m2) 4250 100 PRE- VVHT242478F8 VVHT ePM1 60% 14 2125 (m3) FILTERS VVHT243678F8 VVHT ePM1 60% 7 2000 100 VVHT183678F8 VVHT 610x610x292 F8 65 ePM1 60% 7.5 3000 140 0.11 11 1 F 2 VVHT191978F8 VVHT 305x610x292 F8 69 ePM1 60% 11.25 2250 90 VVHT242455F8 VVHT 610x610x78 ePM1 60% 8.5 1240 0.05 6 1 F PAINTINGS VVHT242412F6 VVHT 915x610x78 F8 n.a. ePM10 70% 4.6 2000 BOOTHS VVHT122412F6 VVHT 915x457x78 M6 n.a. ePM10 70% 7.5 4250 0.09 4.4 1 F VVHT242478F6 VVHT 480x480x78 M6 ePM10 65% 14 2125 3 VVHT243678F6 VVHT 610x610x55 ePM10 65% 7 2500 0.06 6.5 1 F VVHT183678F6 VVHT 610x610x292 ePM10 65% 7.5 3750 COMFORT VVHT191978F6 VVHT 305x610x292 ePM10 65% 11.25 2800 0.12 4.9 1 F PRODUCTS VVHT242455F6 VVHT 610x610x78 ePM10 65% 8.5 1550 915x610x78 4.6 2500 0.06 2.7 1 F 4 915x457x78 7.5 480x480x78 0.06 3.9 1 F EPA/HEPA 610x610x55 /ULPA 0.11 11 1 F 5 0.05 6 1 F HIGH 0.09 4.4 1 F TEMPERA- 0.06 6.5 1 F TURE 0.12 4.9 1 F 6 0.06 2.7 1 F EQUIP- MENTS 0.06 3.9 1 F 7 *UxP *Stock *ME%: Minium Efficiency to EN779:2012 Units per box F: Manufacturer, S: Stock, SL: Limited Stock MOTORS AND Venfilter [email protected] 167 Tel +34 937 862 607 www.venfilter.com TURBINES Fax +34 937 862 493 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 High temperature INFORMA- Micropac HT TION High Temperature Filters 1 PRE- FILTERS Filtration in cabins & Painting Ovens. 2 Technical features Dimensions Certification PAINTINGS Type: Compact filter with High Efficiency for high temperatures. BOOTHS Frame: Extruded and anodized aluminum. Filtering Element: Fiberglass Paper. 3 Separators: Fiberglass Strip. Joint: Fiberglass with exterior covering. COMFORT EN 1822 Class: E10. PRODUCTS Protective grid: Aluminum perfoNominal on both sides. Average efficiency % (Am): 85% 4 Recommended Final Pressure Pressure Drop: 450 Pa Temperature: 250ºC EPA/HEPA - Filtration in cabins & Painting Ovens. /ULPA - Silicone Free. 5 HIGH References Model Dimensions Efficiency EN 1822 Filter Nominal Initial Weight UxP Stock TEMPERA- BxHxP (MPPS Class Surface flow Pa Reference E%) TURE 663x358x48 85 E10 (m2) (m3/h) 60 663x663x48 85 E10 3,5 360 60 (Kg) * * 6 625x320x38 85 E10 7 420 60 MPHT35866348H10 MPHT 625x625x38 85 E10 2,5 150 60 3,2 1 F EQUIP- MPHT66366348H10 MPHT 5 300 5,5 1 F MENTS MPHTP62532038H10 MPHT 3 1F MPHTP62562538H10 MPHT 5 1F 7 *UxP *Stock *ME%: Minium Efficiency to EN779:2012 MOTORS Units per box F: Manufacturer, S: Stock, SL: Limited Stock AND TURBINES 8 ADSOR- 168 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL NORMATI- VE

High temperature Dimensions 0 Certification Multiven HT 120º INFORMA- TION Air Treatment 1 Intake, discharge and recirculation in ventilation systems requiring HIGH TEMPERATURE: in air conditioning equi- PRE- pment (air conditioning units, ventilation chambers, etc.), FILTERS air conditioning systems (hospitals, laboratories, museu- ms, airports, etc.), industrial processes (the pharmaceu- 2 tical food, optics, microelectronics, veterinary medicine and chemical industries and for surface treatments) and PAINTINGS as a pre-filter for Hepa and Ulpa filters. BOOTHS Technical features 3 Type: Compact filter - polyhedral rigid bag. COMFORT Frame: Polycarbonate. PRODUCTS Filter Component: Fiberglass paper. Separators: High temperature glue beads. 4 Sealant: Polyurethane. Average Efficiency % (Em): 60% ‹ Em ‹ 80%, 80% ‹ Em ‹ 90%, EPA/HEPA 90% ‹ Em ‹ 95% and 95% ‹ Em. /ULPA EN 779 Class: M6, F7, F8 and F9. ISO 16890: ePM10 65%, ePM1 50%, ePM1 65% and ePM1 80%. 5 Recommended Final Pressure Drop: 600 Pa. Temperature: 120-150ºC continuous service. HIGH TEMPERA- Advantages TURE - High Capacity of dust retention. - Temperature: 350 ° C continuous service. 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 169 INTER- www.venfilter.com NATONAL NORMATI- VE

0 High temperature INFORMA- References TION 1 Reference Model Dimensions EN ME ISO 16890 Nominal Nominal Unit Weight UxP Stock BxHxP 779 % flow flow PRE- Class Volume (Kg) * * FILTERS (m3/h)/Pa (m3/h)/Pa (m3) 4250/155 3400/115 MVHT120242412F9 MVHT120 592x592x292 F9 80 ePM1 80% 0.12 5 1 F MVHT120202412F9 MVHT120 592x492x292 ePM1 80% 3500/155 2800/115 0,09 4 1 F 2 MVHT120122412F9 MVHT120 592x292x292 ePM1 80% 2125/155 1750/115 0,06 3 1 F MVHT120242412F8 MVHT120 592x592x292 F8 65 ePM1 65% 4250/125 3400/92 0,12 5 1F MVHT120202412F8 MVHT120 592x492x292 ePM1 65% 3500/125 2800/92 0,09 4 1F PAINTINGS MVHT120122412F8 MVHT120 592x292x292 ePM1 65% 2125/125 1750/92 0,06 3 1F BOOTHS MVHT120242412F7 MVHT120 592x592x292 F7 54 ePM1 50% 4250/115 3400/78 0,12 5 1F MVHT120202412F7 MVHT120 592x492x292 ePM1 50% 3500/115 2800/78 0,09 4 1F 3 MVHT120122412F7 MVHT120 592x292x292 ePM1 50% 2125/115 1750/78 0,06 3 1F MVHT120242412F6 MVHT120 592x592x292 MVHT120202412F6 MVHT120 592x492x292 M6 ePM10 65% 4250/100 3400/65 0,12 5 1F ePM10 65% 3500/100 2800/65 0,09 4 1F COMFORT MVHT120122412F6 MVHT120 592x292x292 ePM10 65% 2125/100 1750/65 0,06 3 1F PRODUCTS * ME%: Minimum Efficiency EN779: 2012 4 * Energy Consumption kWh / year: Calculated according to Eurovent 4 / 21-2017 guidelines. *UxP *Stock ** Energy Consumption kWh / year: Calculated according to Eurovent guidelines. Units per box F: Manufacturer, S: Stock, SL: Limited Stock **** Energy class according to Eurovent. EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- 170 Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION 9 INTER- NATONAL NORMATI- VE

High temperature 0 Multiven HT 350ºC INFORMA- TION Air Treatment 1 Intake, discharge and recirculation in ventilation systems re- Dimensions PRE- quiring HIGH TEMPERATURE: in air conditioning equipment Certification FILTERS (air conditioning units, ventilation chambers, etc.), air condi- tioning systems (hospitals, laboratories, museums, airports, 2 etc.), industrial processes (the pharmaceutical food, optics, microelectronics, veterinary medicine and chemical indus- PAINTINGS tries and for surface treatments) and as a pre-filter for Hepa BOOTHS and Ulpa filters. 3 Technical features COMFORT Type: Compact filter - polyhedral rigid bag. PRODUCTS Frame: Polycarbonate. Filter Component: Fiberglass paper. 4 Separators: High temperature glue beads. Sealant: Polyurethane. EPA/HEPA Average Efficiency % (Em): 60% ≤ Em < 80% and 90% ≤ Em < 95%. /ULPA EN 779 Class: M6 and F8. ISO 16890: ePM10 60% and ePM1 60%. 5 Recommended Final Pressure Drop: 450 Pa. Temperature: 350ºC continuous service. Advantages - Temperature: 350°C continuous service. References HIGH TEMPERA- Reference Model Dimensions EN *ME ISO 16890 Nominal Initial Energy Energy Energy Unit UxP S BxHxP 779 % flow Pa Class Cons. Cons. Volume * * TURE Class (m3/h) 16890 kWh/ kWh/ **** year year (m3) F 6 779 16890 F MVGVHT350232312F8 MVGVHT350 592x592x292 F8 85 ePM1 60% 3400 140 D 0,12 1 F EQUIP- MVGVHT350202312F8 MVGVHT350 592x492x292 M6 ePM1 60% 2500 97 D * ** 0,09 1 F MENTS MVGVHT350112312F8 MVGVHT350 592x287x292 ePM1 60% 1700 D 1830 1900 0,06 1 F MVGVHT350232312F6 MVGVHT350 592x592x292 3400 E 0,12 1 F 7 MVGVHT350202312F6 MVGVHT350 592x492x292 65 ePM10 60% 2500 E 1426 >1200 0,09 1 F MVGVHT350112312F6 MVGVHT350 592x287x292 ePM10 60% 1700 E 0,06 1 MOTORS MVGVHT350242416F6 MVGVHT350 610x305x400 ePM10 60% 1700 - 0,09 1 AND ePM10 60% TURBINES * ME%: Minimum Efficiency EN779: 2012 8 * Energy Consumption kWh / year: Calculated according to Eurovent 4 / 21-2017 guidelines. ADSOR- *UxP *Stock ** Energy Consumption kWh / year: Calculated according to Eurovent guidelines. TION AND Units per box DESODO- F: Manufacturer, S: Stock, SL: Limited Stock **** Energy class according to Eurovent. RIZATION Venfilter [email protected] 171 9 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 INTER- NATONAL NORMATI- VE

0 High temperature Dimensions Certification INFORMA- Poliven HT 120ºC TION High Temperature Filters 1 The HEPA absolute filters are used for filtration of incoming, PRE- outgoing and recirculation air in ventilation systems such as: FILTERS Incoming Air: Clean Rooms, Operating Theatres, Laboratories, etc. Industrial Processes: Microelectronics, food industry, optics, 2 pharmaceutical industry, fine chemistry, etc. Treatment of Dangerous substances: Asbestos, Metal dust, Bacteria, Viruses, PAINTINGS Radioactive Particles. BOOTHS Technical features 3 Type: Compact Polyhedral Absolute Filter with Very High COMFORT Efficiency and Large Flow. PRODUCTS Frame: Galvanized Steel with handle Filtering Element: Glass microfiber paper. 4 Separators: Glue beads Higt Temperature. Sealant: Polyurethane. EPA/HEPA Joint: Bicomponent polyurethane liquid system. (Semi-cir- /ULPA cular expanded polyurethane) MPPS efficiency: 85%, 99.95% and 99.995% 5 EN 1822 Class: E10, H13 and H14. Recommended Final Pressure Pressure Drop: 600 Pa. HIGH Temperature: 120-145ºC in continuous service. TEMPERA- Advantages TURE - High Nominal flow for a low pressure Pressure Drop. 6 - Filters totally interchangeable with the minipleat aluminum separator filters which have Galvanized steel or wooden frames. EQUIP- MENTS References 7 Reference Model Dimensions Efficiency Class Filter Nominal Initial Unit Weight UxP Stock BxHxP (MPPS E EN Surface flow Pa MOTORS PVGVHT120122412.4H13 1822 Volume (Kg) * * AND PVGVHT120242412.8H13 %) H13 (m2) (m3/h) 250 PVGVHT120242412.10H13 99,95% H13 16 1700 250 (m3) TURBINES PVGVHT120122412.4H14 99,95% H13 32 3400 280 PVGVHT120242412.10H14 PVGVHT120 305x610x292 99,95% H14 40 4000 280 0,05 14 1 F 8 PVGVHT120 610x610x292 99,995% H14 16 1200 280 PVGVHT120 610x610x292 99,995% 40 3000 0,12 21 1 F ADSOR- PVGVHT120 305x610x292 TION AND PVGVHT120 610x610x292 0,12 23 1 F DESODO- RIZATION 0,05 14 1 F 9 0,12 23 1 F INTER- *UxP *Stock NATONAL Units per box F: Manufacturer, S: Stock, SL: Limited Stock NORMATI- Venfilter VE 172 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com

High temperature 0 Poliven HT 250ºC Dimensions INFORMA- TION High Temperature Filters H 1 The absolute HEPA filters are used for a filtration of air inlet, PB outlet and recirculation in ventilation systems such as: Air inlet: PRE- Clean Rooms, Operating Rooms, Laboratories, etc. Industrial Certification FILTERS Processes: Microelectronic, food, optical, pharmaceutical, fine chemical, etc. Hazardous Substances Treatment: Asbestos, 2 Metallurgical Powders, Bacteria, Viruses, Radioactive Particles. PAINTINGS Technical features BOOTHS Type: Absolute Multidihedral Compact Filter of Very High 3 Efficiency and High Flow. Frame: Galvanized or Stainless Steel. COMFORT Filter Element: Glass microfiber paper. PRODUCTS Separators: High Temperature glue beads. Sealant: Silicone. 4 Gasket: Silicone MPPS efficiency: 85%, 99.95% and 99.995%. EPA/HEPA EN 1822 Class: E10, H13 and H14. /ULPA Recommended Final Pressure Drop: 600 Pa. Temperature: 250ºC in continuous service. 5 HIGH TEMPERA- TURE Advantages 6 - High nominal flow for low Pressure Drop. EQUIP- - Filters fully interchangeable by aluminum separator filters, minipleat MENTS and with galvanized steel frames. 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 173 INTER- www.venfilter.com NATONAL NORMATI- VE

0 High temperature INFORMA- References Model Dimensions Efficiency EN Filtrant Nominal Initial Unit UxP Stock TION BxHxP (MPPS 1822 Surface Flow Pa Volume ** Reference PVGVHT250 E %) Class (m3/h) 1 PVGVHT250 287x595x292 99.95% H13 (m2) 1250 240 (m3) 1F PVGVHT250112312H13 PVGVHT250 305x610x292 99.95% H13 11 1250 240 0,05 1F PRE- PVGVHT250122412H13 PVGVHT250 490x595x292 99.95% H13 11 1900 240 0,05 1F FILTERS PVGVHT250202312H13 PVGVHT250 490x610x292 99.95% H13 17 1900 240 0,09 1F PVGVHT250202412H13 PVGVHT250 595x595x292 99.95% H13 17 2500 240 0,09 1F 2 PVGVHT250232312H13 PVGVHT250 610x610x292 99.95% H13 22 2500 240 0,12 1F PVGVHT250242412H13 PVGVHT250 287x595x292 99.995% H14 22 1250 260 0,12 1F PAINTINGS PVGVHT250112312H14 PVGVHT250 305x610x292 99.995% H14 11 1250 260 0,05 1F BOOTHS PVGVHT250122412H14 PVGVHT250 490x595x292 99.995% H14 11 1900 260 0,05 1F PVGVHT250202312H14 PVGVHT250 490x610x292 99.995% H14 17 1900 260 0,09 1F 3 PVGVHT250202412H14 PVGVHT250 595x595x292 99.995% H14 17 2500 260 0,09 1F PVGVHT250232312H14 610x610x292 99.995% H14 22 2500 260 0,12 1F COMFORT PVGVHT250242412H14 22 0,12 PRODUCTS PVINHT250112312H13 PVINHT250 287x595x292 99.95% H13 11 1250 240 0,05 1 F 4 PVINHT250122412H13 PVINHT250 305x610x292 99.95% H13 11 PVINHT250202312H13 PVINHT250 490x595x292 99.95% H13 17 1250 240 0,05 1 F EPA/HEPA PVINHT250202412H13 PVINHT250 490x610x292 99.95% H13 17 /ULPA PVINHT250232312H13 PVINHT250 595x595x292 99.95% H13 22 1900 240 0,09 1 F PVINHT250242412H13 PVINHT250 610x610x292 99.95% H13 22 5 PVINHT250112312H14 PVINHT250 287x595x292 99.995% H14 11 1900 240 0,09 1 F PVINHT250122412H14 PVINHT250 305x610x292 99.995% H14 11 HIGH PVINHT250202312H14 PVINHT250 490x595x292 99.995% H14 17 2500 240 0,12 1 F TEMPERA- PVINHT250202412H14 PVINHT250 490x610x292 99.995% H14 17 PVINHT250232312H14 PVINHT250 595x595x292 99.995% H14 22 2500 240 0,12 1 F TURE PVINHT250242412H14 PVINHT250 610x610x292 99.995% H14 22 1250 260 0,05 1 F 6 1250 260 0,05 1 F EQUIP- MENTS 1900 260 0,09 1 F 7 1900 260 0,09 1 F MOTORS 2500 260 0,12 1 F AND 2500 260 0,12 1 F TURBINES *UxP *Stock 8 Units per box F: Manufacturer, S: Stock, SL: Limited Stock ADSOR- Venfilter TION AND DESODO- 174 Tel +34 937 862 607 [email protected] RIZATION Fax +34 937 862 493 www.venfilter.com 9 INTER- NATONAL NORMATI- VE

High temperature 0 Graphic INFORMA- TION HT-1000 1 Function of Initial Pressure Drop vs. flow rate HT PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 Variven HT EPA/HEPA /ULPA Function of Initial Pressure Drop vs. flow rate VVHTP 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 4250 ADSOR- TION AND Venfilter DESODO- Tel +34 937 862 607 RIZATION Fax +34 937 862 493 9 [email protected] 175 INTER- www.venfilter.com NATONAL NORMATI- VE

0 High temperature [email protected] www.venfilter.com INFORMA- Variven HT TION Function of Initial Pressure Drop vs. flow rate 1 VVHT PRE- 4250 FILTERS Venfilter 2 Tel +34 937 862 607 176 Fax +34 937 862 493 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Purifier MIA AIR PLUS INFORMA- TION Purifiers: VEN AIR 1 Unit for air purification, and an immediate recirculation of the interior air. It complements the ventilation PRE- systems. Designed for offices, shops, gyms, schools, FILTERS museums, medical and dental clinics, nursing homes, etc. 2 Technical features Dimensions PAINTINGS BOOTHS Type: Air purifier MIA AIR for immediate recirculation of the interior air, H converting the polluted air into BP 3 clean in minutes, in a space of up to 100m2. Construction: ABS Shock resistant. COMFORT Voltage: 230 VAC, 50/60 Hz. PRODUCTS Power Consumption: 25-105W. Dimensions: 66x38x38 cm. 4 Weight: 16/18 Kg. Air Volume: 90 to 910 m3 / h with six speeds EPA/HEPA /ULPA 94 to 530 cfm with six speeds Renewals: For 50m2 it will renew the air a minimum of 6 times per hour. 5 For 100m2 it will renew the air a minimum of 3 times per hour. HIGH Sound level: <60 dB (Automatic mode) TEMPERA- Control: Remote by Mobile Application. (APP). Wi-Fi connection: With 802.11 b / g / n router in Wi-Fi network band of 2.4 Ghz. TURE Sensors: VOC, ePM1, ePM2.5, ePM10, CO2, Temperature and Moisture. Colours: White and Grease Space. 6 References EQUIP- MENTS References Model Colour Dimensions UV Lamp Weight UxP Stock White 380x660x380 mm No 18 1 SL 7 MIA-AIR-PLUS/BH14 MIA-AIR Space Grey 380x660x380 mm No 18 1 SL White 380x660x380 mm Yes 18 1 SL MOTORS MIA-AIR-PLUS/GSH14 MIA-AIR Space Grey 380x660x380 mm Yes 18 1 SL AND MIA-AIR-PLUS/BH14UV MIA-AIR TURBINES MIA-AIR-PLUS/GSH14UV MIA-AIR 8 *UxP Units per box ADSOR- *Stock F: Manufacture, S: Stock, SL: Limited Stock TION AND DESODO- Filtration RIZATION Type Dimensions mm. Efficency MPPS Class EN 1822 Treatment* 9 H14 ANTIMIC HEPA FILTER 260x495x60 >99,999% INTER- NATONAL * ANITIMIC: Antimicrobial coating, viricide and fungicide. NORMATI- ** Optional VE Type Dimensions mm. Efficency VOC CARBON FILTER 260x495x18 Benzene, Formaldehyde, Toluene, Xylene, ETHYL ALCHOL, etc. Venfilter [email protected] 177 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493

0 Equipments INFORMA- TION The equipment is provided with filters on the sides, composed of: 1 - Pre-filter: Filters out the thicker particles. - Carbon filter: Captures chemical (VOC's) or atmospheric pollutants suspended in the air, reducing the risk of health problems caused by pollution. PRE- - Hepa Filter: HEPA filter that traps and neutralizes particles of 0.01 microns or FILTERS bigger (including microbes, bacteria, viruses and nanoviruses) preventing them from spreading in the air. 2 The filter is impregnated with an ANTIMIC solution that besides trapping the microorganisms, it kills them, so they cannot create colonies within the PAINTINGS equipment. BOOTHS 3 The air enters from the sides where the filter packs are placed, as the air passes first through the pre-filter, then through the carbon filter and COMFORT finally through the HEPA filter, in a matter of seconds, it is completely PRODUCTS free of particles and contaminants, the powerful fan at the top, returns that clean and healthy air, distributing it in a circular way providing a 360º distribution. 4 APP EPA/HEPA The equipment is equipped with a router for Wi-Fi connection, which allows /ULPA connecting it to the local network and installing the PPP. The practical mobile App allows having the control of the device and the conditions of its environment 5 at all times, and from anywhere. Easy to install application, with only one screen, it provides instantaneous and real time information on: air quality, life span of filters and gives access to all device related parameters. HIGH Different modes of operation of the device: TEMPERA- - Silent - Turbo TURE - Auto - Eco 6 - Manual EQUIP- Data provided: MENTS - Air Quality Index (AQI) - Particle counter ePM1, ePM2.5 and ePM10 7 - VOC particle counter - Temperature, Relative Humidity and CO2 level information MOTORS - Status and life span of the filter AND - Filter Status and Life Cycle TURBINES Air Quality Index Rating Table 8 ePM 2.5 VOC Good 0-30 Good 0-60 Moderate 30-100 Moderate 60-200 ADSOR- Poor 100-150 Poor 200-600 TION AND Unhealthy 150-200 Unhealthy 600-2000 DESODO- Extremely Harmful 200-300 Extremely Harmful 2000-5300 RIZATION Dangerous >300 Dangerous >5300 9 178 Venfilter [email protected] INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

Equipments 0 UPA AIR Purifier INFORMA- TION Purifiers: VEN AIR 1 The main route of transmission of viruses, bacteria, dust particles and other polluting aerosols is the airway, therefore it must be controlled PRE- and reduced to the maximum in all types of buildings, especially those FILTERS where there is a high level of occupancy. . The comfort and health levels of the users and workers of these spaces can be dramatically 2 improved thanks to the facilities of the buildings themselves, this includes HVAC systems and other elements such as air purifiers. PAINTINGS BOOTHS Dimensiones 3 Technical features COMFORT Type: UPA series filtration units. H PRODUCTS Construction: Smooth interior and exterior finishes, without screws, making them easy to clean and maintain. P 4 Rock wool insulation in 30mm thick panels. Access: Access for maintenance in all equipment sections. EPA/HEPA Filter attachment: BTRA frame and GUIDES /ULPA Installation: Air discharge from the unit is conducted to the outside. Suction of room where the unit is located. 5 Vertical (purifier with wheels) or horizontal configuration. HIGH Fan B TEMPERA- Plug&Play unit with EC fans and speed regulation 10-100% by means of potentiometer (optional RC to TURE keep the flow rate constant independently of the filter clogging status). Led indicator: - Filter dirty - Fan status - UV lamp (optional) ON/OFF switch: - For the unit - For the UV lamp (optional) Advantatges 6 Depending on the installation of the equipment, it can operate in three different modes of operation: EQUIP- MENTS 1. Unit to generate room depression that isolates the cabin: Extracts and expels clean air to prevent the spread of 7 viruses, bacteria and aerosols outdoors ( requires exhaust duct mouth in purifier drive). Installation mode: Air supply from the unit to the outside. Suction from room where unit is located. MOTORS afrnodmspthreeaudnoitfdviirreucstelys,tobatchteerroiaoamnd(paoesrsoib-i-TURABNIDNES 2. Unit for recirculation and cleaning of room air: To avoid proliferation sols without the need to connect to ducts. Installation mode: Air supply lity of MIFV 1-4 way accessory for grid drive of simple deflection on 1,2,3 or 4 sides). Room suction where the unit is located. 8 3. Unit for generating room overpressure: So that clean air is supplied air without the presence of viruses, bac- teria or aerosols. Installation mode: Supply of air from the unit directly into the room (possibility of MIFV 1-4 way ADSOR- accessory for impulse through single deflection grille with 1,2,3 or 4 sides). Suction conducted from outside the TION AND premises. DESODO- RIZATION Venfilter 9 Tel +34 937 862 607 Fax +34 937 862 493 [email protected] 179 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments Absolute filtration HEPA H13-H14 They have a 99.95% filtration efficiency under the INFORMA- Composition standard EN1822 with particle sizes between 0.15 and TION 0.3 μm. The transmission of viruses takes place as Drive plenums usual by means of two types of droplets: large (>10 1 For the vertical range there are μm) and small (>5 μm), resilient in the environment. modules that allow the drive In this component you would eliminate almost entirety PRE- .by simple defelction air grilles the first particle transmission mechanism attached to FILTERS saliva droplets. The absolute filters with a large filtering surface (bo- 2 ttom 292) have a much higher particle retention ca- pacity PAINTINGS than low depth filters, reducing notably its need for BOOTHS maintenance and improving their amortization. 3 ePM1 Filtration 80%/F9 ePM1 Filtration 70%/F8 COMFORT Under ISO 16890, these filters have a 80% filtration PRODUCTS efficiency against particles of 1 μm, significantly redu- cing the transmission of viruses, bacteria and aerosols 4 Support attached to the droplets of saliva The vertical range incorporates EPA/HEPA wheels to facilitate moving the Active Carbon Filtration /ULPA unit. In the horizontal range you As a complement to air purification, the gas filters can choose from equipment in with chemical absorbent are capable of eliminating 5 .suspension or fixed odours by adsorption of gases such as hydrogen sulfide, dimethyl sulfide mercaptans, nitrogen HIGH 180 oxides, formaldehydes, VOCs, formaldehyde, TEMPERA- ethylene, chlorine ammonia, mercury TURE Ultraviolet lamps UVC radiation inactivates and inhibits replication of 6 the nucleic acids (DNA and RNA) of microorganisms (viruses, bacteria, etc.). The absorption of a very EQUIP- high energy in a wave length of 253nm generates MENTS irreversible damage in the structure of nucleic acids and proteins at the molecular level (Ashrae 7 Fundamentals, Ch62,) Ultraviolet and surface treatement MOTORS EC Fans AND EC technology in plugfan fans with motor incorporated, fully implanted in the market TURBINES European HVAC represents a competitive advantage in terms of efficiency, consumption, level sound and 8 regulation, as opposed to any other type ADSOR- ePM pre-filter 10-50% TION AND The installation of an ePM10-50% pre-filter allows the protection of DESODO- the equipment’s interior components, extending its life and improving RIZATION the efficiency of UV lamps 9 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INTER- Fax +34 937 862 493 NATONAL NORMATI- VE

Equipments 0 Codification V/H 6000 H13 CG INFORMA- TION UPA Range: Flow Eficacia Grmicide Model V: Vertical m3/h CA/F7 ePM1 50% chamber 1 H: Horizontal Arrangement F8 ePM1 70% PRE- F9 ePM1 80% FILTERS H13/H14 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE Vertical arrangement Horizontal arrangement 6 References EQUIP- MENTS 1st Stage 1st Stage 2nd Stage 2nd Stage 3rd Stage 3rd Stage No. of filters No. of filters No. of Filters No. of Filters No. of Filters No. of Filters References Model AxBxC (mm) 287x592x48 592x592x48 287x592x292 592x592x292 305x610x292 610x610x292 Weight Kg UxP Stock 7 82 1 F UPA-H-1500 UPA-AIR 474x1714x704 1 1 1 1 1 1 1 UPA-H-3000 UPA-AIR 754x1714x704 2 1 2 1 125 1 F MOTORS 2 2 2 165 1 F AND UPA-H-4500 UPA-AIR 754x1714x1029 1 2 11 225 1 F TURBINES 1 1 1 UPA-H-6000 UPA-AIR 754x1814x1334 2 1 1 22 2 1 2 UPA-H-7500 UPA-AIR 754x2044x1659 2 2 2 2 22 275 1 F 2 UPA-V-1500 UPA-AIR 1714x474x704 1 1 882 1 F UPA-V-3000 UPA-AIR 1714x754x704 1 125 1 F UPA-V-4500 UPA-AIR 1714x754x1029 1 11 165 1 F UPA-V-6000 UPA-AIR 1814x754x1334 2 22 225 1 F ADSOR- TION AND UPA-V-7500 UPA-AIR 2044x754x1659 2 22 275 1 F DESODO- *UxP Units per box RIZATION *Stock F: Manufacture, S: Stock, SL: Limited Stock 9 Venfilter Tel +34 937 862 607 [email protected] 181 INTER- Fax +34 937 862 493 www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Accesories TION - UPA-MIFV: Frontal supply module with 1,2,3 or 4-way single deflection grille. 1 - UPA-MAFV: Suction module for overpressure operation. - UPA-MHS: System for equipment suspension (Horizontal Range) PRE- - UPA-RC: Flow regulator (to maintain constant flow) FILTERS - UPA-CG: Accessory for UVC germicidal lamps. 2 Suction/Supply Module (Optional for vertical range) PAINTINGS - MAFV: Suction BOOTHS 1V 2V 3 - MIFV: Supply COMFORT PRODUCTS 3V 4V 4 Dimensions EPA/HEPA References A B D /ULPA UPA-H-1500 474 704 274 5 UPA-H-3000 754 704 274 UPA-H-4500 754 1029 274 HIGH UPA-H-6000 754 1334 334 TEMPERA- UPA-H-7500 754 1659 334 TURE Technical data 6 Model Flow Nominal Maximum Supply Sound level Fan Effective (m3/h) pressure pressure voltage (V) dB(A) (kW) radiation EQUIP- available (Pa) available (Pa) 49 power (W) MENTS 230V 50/60Hz 1Ph 53 (1x) 0.75 UPA-H-1500 1500 200 500 230V 50/60Hz 1Ph 54 (1x) 1,27 102 7 400V 50/60Hz 3Ph 59 (1x) 1,72 153 UPA-H-3000 3000 200 300 400V 50/60Hz 3Ph 56 (1x) 2,95 207 MOTORS 400 50/60Hz 3Ph 49 (1x) 2,7 264 AND UPA-H-4500 4500 200 400 230V 50/60Hz 1Ph 53 (1x) 0.75 352 230V 50/60Hz 1Ph 54 (1x) 1,27 102 TURBINES UPA-H-6000 6000 200 650 400V 50/60Hz 3Ph 59 (1x) 1,72 153 400V 50/60Hz 3Ph 56 (1x) 2,95 207 8 UPA-H-7500 7500 200 400 400 50/60Hz 3Ph (1x) 2,7 264 352 ADSOR- UPA-V-1500 1500 200 500 TION AND DESODO- UPA-V-3000 3000 200 300 RIZATION UPA-V-4500 4500 200 400 9 UPA-V-6000 6000 200 650 INTER- NATONAL UPA-V-7500 7500 200 400 NORMATI- Nominal and maximum available pressure with G4 + H13 filtration (c2 configuration). VE Sound levels calculated with G4 + H13 filtration (c2 configuration). Venfilter Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com 182

Equipments 0 Hygienic Change INFORMA- TION Mounting parts 1 Hermetic filter unit for secure filter change, without contamination, designed for applications with safety PRE- demands, in zones with contaminated air (particles, FILTERS microorganisms, molecules), environments that can adversely affect the operator’s safety. Suited for the 2 pharmaceutical, biotechnology, chemical industries, hospitals, biosafety laboratories, facilities for animals. PAINTINGS BOOTHS Technical features 3 Type: Hermetic modular filter unit for filter change without contamination, designed for applications with safety demands. COMFORT Construction: Watertight welded steel, continuous welding, safety PRODUCTS cover. Finish: White epoxy paint (RAL 9010) and oven dried. Possible in 4 stainless steel. For filters: HEPA/ULPA filters like our Poliven, Astroven with a EPA/HEPA depth of 292 mm Carbon filters Poly-carb with a depth of 292mm and /ULPA Quebraven, Varipleat type filters. Depth of 98 mm. Filter assembly: Fast filter securing through the lever system, 5 equipped with “double safety” both on the support frame and on the door: Impossible to fasten the filter if it is not placed correctly and HIGH impossible to close the door if the filter is not fastened to the frame. TEMPERA- Connection: Pre-drilled rectangular brackets. Options: Stainless steel, configuration for ATEX environments. Many TURE options are available regarding installation configuration. Please ask our experts. 6 Advantages EQUIP- MENTS - Secure filter change, no risk of contamination. - Configuration as per requirements. A wide range of con- 7 tainers with various options is offered. Individual or possibi- lity of various stages of filtration in just one container. MOTORS - Lateral or upper/lower air input/output plenums availa- AND ble. - Procedure manual to replace the filter. TURBINES - ATEX version possible. 8 Accessories ADSOR- - Safe changing bag with sealed O-ring TION AND - Safety bags with O-ring and arm protection DESODO- - Connection ducts 1-6 in parallel for high flow rates RIZATION - Analog pressure gauge integrated in console - Support table for filter change 9 - Inspection records - System for filter scanning - Inspection records Venfilter [email protected] 183 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Equipments Filter placement With support table INFORMA- Equipment with plenums Securing the filter Check the tightness of the filter TION Lid opening Filter 1 Bag securing O-ring inspection Scanning record PRE- FILTERS 184 Pressure drop Aerosol control injection port 2 for scanning PAINTINGS Pressure gauge console BOOTHS Venfilter [email protected] 3 Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Module configuration system INFORMA- TION Model Filter measurements (mmxmm) 1 CCH1 610x610 PRE- FILTERS CCH2 305x610 2 * 610 is always the front measurement. PAINTINGS Model Pre-filter Filter BOOTHS Height: 98mm Height: 292mm F 3 PF+F 0 1 F+F 1 1 COMFORT PF+F+F 0 2 PRODUCTS 1 2 4 FILTER 292 FILTER 98 + FILTER 292 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS References Accessories 7 Reference Description MOTORS CCH/CHANGE Hygienic change bag kit + adjustment o-ring AND CCH/CHANGE-CB Hygienic changing bag kit with arm guard + adjustment o-ringe TURBINES CCH/SCAN-POINTS System for scanning the filter by points CCH/LOCAL-SCAN System for local filter scanning 8 CCH/PRESSURE GAUGE Analog pressure gauge integrated in console CCH/SOPORT Support table for maintenance changes CCH / REGISTER-DOOR Door inspection record ADSOR- TION AND CCH/REGISTER-FILTER Filter visual inspection record DESODO- RIZATION CCH / TEST-JOINTS Checking the seal in the filter gasket 9 Venfilter Tel +34 937 862 607 [email protected] 185 INTER- Fax +34 937 862 493 www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Configuration with FILTER 610mm TION 3000 6000 9000 1 [email protected] PRE- www.venfilter.com FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 186 Venfilter Tel +34 937 862 607 EPA/HEPA Fax +34 937 862 493 /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 15000 18000 0 12000 INFORMA- TION 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 187 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- Configuration with FILTER 305mm TION 1200 1 2400 3600 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 188 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com EPA/HEPA Fax +34 937 862 493 /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 6000 0 4800 INFORMA- TION 17200 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 189 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- References TION Pre-filter 1 Reference Measurements Classification Classification Filtering Nominal Initial (BxH) as per as per Surface Flow Pa PRE- QME61030598G4 EN779 (m3/h) FILTERS QME61061098G4 610x305x98 G4 ISO16890 (m2) 2340 45 VPLPL122404F7 610x610x98 G4 ePM10 50% 0,51 5130 45 2 VPLPL242404F7 305x610x98 F7 ePM10 50% 1,05 1600 90 PVGV122412.4F9 610x610x98 F7 ePM1 55% 5,8 3200 90 PAINTINGS PVGV242412.8F9 305x610x292 F9 ePM1 55% 11,6 2250 160 BOOTHS 610x610x292 F9 ePM1 80% 14 4500 160 ePM1 80% 28 3 Reference Measurements Classification as Filtering Nominal Initial COMFORT (BxH) per EN1822 Surface Flow Pa PRODUCTS AVGVPP122411H14 (m3/h) AVGVPP242411H14 305x610x292 H14 (m2) 1330 280 4 610x610x292 H14 12,48 2680 280 PV122412.4H14 305x610x292 H14 25,17 1600 280 EPA/HEPA PV242412.10H14 610x610x292 H14 4000 280 /ULPA PV242412.10H14 610x610x292 H14 20 4000 280 40 5 40 HIGH Reference Measurements Carbon ºC MAX % Weight TEMPERA- (BxH) Volume Recommended (Kg) CAF122412 45 relative humidity TURE CAF242412 305x610x292 10 45 18 610x610x292 20 30-70 30 6 30-70 EQUIP- 190 Venfilter [email protected] MENTS Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments Dimensions 0 Surgery ceiling INFORMA- TION Mounting parts For 66 mm filters 1 Surgery ceilings with plenum with replaceable HEPA/ PRE- ULPA filters, Laminarven type, for a correct diffusion of FILTERS air in operating rooms with laminar flow. 2 Technical features PAINTINGS Type: Diffusor terminal unit for ceiling installation, for the final filtration BOOTHS in operating rooms. Construction: Electro-galvanised watertight welded steel, white epoxy 3 paint (RAL 9010) and oven dried. Air input: Lateral or superior, as per project needs. The standard version COMFORT is manufactured with lateral input. PRODUCTS Installation: Handles to fasten it allowing for fast and easy mounting. For filters: Laminarven type with depths of 66, 69 mm in the standard 4 version. 80 mm when filters have a gel seal. Control: Connection is standard feature in the structure. EPA/HEPA Options: /ULPA - Plenum, structure and stainless-steel grid. - Watertight receptacle to place the lamp, position it as per project 5 needs. - Possibility to construct plenum to place filters with gel seal. HIGH - Steel protection grid white epoxy paint RAL 9010 oven dried. TEMPERA- - Protection screen made of nylon cloth tensed over the frame. TURE Advantages 6 - Smooth coating, easy cleaning of the diffusor grid. - Internal centring parts for the filters and fasteners to place the filter EQUIP- within the structure. MENTS - Replaceable Hepa or Ulpa Filter. - Dismounting the filter without altering ceiling water-tightness. DOP connections and Pressure Drop. 7 MOTORS AND TURBINES Filter fastener For DOP measures Integrity test probe 8 Side view Brackets Air outlet ADSOR- [email protected] TION AND Venfilter www.venfilter.com DESODO- Tel +34 937 862 607 RIZATION Fax +34 937 862 493 9 191 INTER- NATONAL NORMATI- VE

0 Equipments INFORMA- TION 1 References PRE- Reference Model Dimensions Total Filter BxHxP Filter BxHxP Flow Flow Sections Suspension Panel for UxP Stock FILTERS BxHxP Surf. Units (mm) Units (mm) m3/h m3/h points surgery ** (m2) 2 at 0,30 at 0,25 18 lamp 1F 4 18 (*) 1F 4 m/s m/s 18 YES 1F 10 2 10 YES 1F 2 VENHOSP.TYPE1P VENHOSP 2552x400x1332 3,4 8 915x610 4 1220x305 2813 2344 2 12 YES 1F VENHOSP.TYPE2P VENHOSP 1963x400x1942 3,7 10 915x610 2 2 12 YES 1F VENHOSP.TYPE3P VENHOSP 2552x400x1963 5,01 14 1220x610 2 610x610 3214 2679 3 12 YES 1F 915x610 YES 1220x610 2 915x610 4420 3683 YES 1220x610 4 PAINTINGS VENHOSP.TYPE4P VENHOSP 2552x400x2594 6,62 1220x610 2 6028 5023 BOOTHS VENHOSP.TYPE5P VENHOSP 3225x400x2512 8,05 915x610 7635 6362 VENHOSP.TYPE6P VENHOSP 3200x400x3200 10 610x610 9644 8037 3 VENHOSP.TYPE7P VENHOSP 3225x400x3733 11,96 610x305 11654 9711 PERFORATED GRIDS PROTECTION COMFORT Reference Model Dimensions Total Filter BxHxP Filter BxHxP Flow Flow Sections Suspension Panel for UxP Stock PRODUCTS BxHxP surf Units (mm) Units (mm) m3/h m3/h points surgery ** (m2) 2 915x610 4 at 0,30 at 0,25 18 lamp 1F 4 915x610 2 18 (*) 1F 4 4 1220x610 2 m/s m/s 18 YES 1F 10 915x610 2 10 YES 1F VENHOSP.TYPE1S VENHOSP 2552x400x1332 3,4 8 1220x610 2 1220x305 2813 2344 2 12 YES 1F VENHOSP.TYPE2S VENHOSP 1963x400x1942 3,7 10 1220x610 4 2 12 YES 1F 14 1220x610 2 610x610 3214 2679 3 12 YES 1F YES EPA/HEPA VENHOSP.TYPE3S VENHOSP 2552x400x1963 5,01 915x610 4420 3683 YES /ULPA VENHOSP.TYPE4S VENHOSP 2552x400x2594 6,62 6028 5023 5 VENHOSP.TYPE5S VENHOSP 3225x400x2512 8,05 915x610 7635 6362 VENHOSP.TYPE6S VENHOSP 3200x400x3200 10 VENHOSP.TYPE7S VENHOSP 3225x400x3733 11,96 610x610 9644 8037 610x305 11654 9711 NYLON SCREENS PROTECTION HIGH TEMPERA- TURE 6 VENHOSP TYPE 6: The VENHOSP type 6 ceiling with an operational surface of around 10m2 is ideal for “hea- vy” surgical interventions (orthopaedic, cardiology, etc.) EQUIP- because it offer the surgical team great relief (recommendation in the“ Guide to air treatment in hospitals” by MENTS INCLIMA) used at a speed of 0,25m/s to 0,30 m/s in a surgery of 45 m2. VENHOSP TYPES 3 and 4: THE 3 and 4 TYPES with injection surfaces of 5 and 7 m2 respond to the needs in 7 “lighter” surgical interventions. VENHOSP TYPE 3: guarantees the minimum index required by standard NF S90-351 in a surgery of 40 m2 MOTORS functioning at an average speed of 0,30m/s. AND VENHOSP TYPE 1: In ultra-sensitive services (third degree burns, patients with immune system disorders, etc.). It specifically adapts to protect the bed. TURBINES *UxP *Stock 8 Units per box F: Manufacturer, S: Stock, SL: Limited Stock ADSOR- Venfilter TION AND DESODO- Tel +34 937 862 607 [email protected] RIZATION Fax +34 937 862 493 www.venfilter.com 192 9 INTER- NATONAL NORMATI- VE

Equipments 0 Technical Documentation INFORMA- TION On request, available filters and position lamp panel on demand. 1 TYPE 1 PRE- FILTERS 1332 mm Filter measure: 610x610 mm 2 Filter measure: 915x610mm 2552 mm Filter measure: 1220x610 mm PAINTINGS Filter measure: 305x305 mm BOOTHS TYPE 2 Filter measure: 610x305 mm Filter measure: 915x305 mm 3 1942 mm Filter measure: 1220x305 mm Lamp panel: COMFORT 1963 mm On request, measures from 420x420 to PRODUCTS 595x595 mm. TYPE 3 In relation to filters according to scheme. 4 1963 mm 193 EPA/HEPA /ULPA 2552 mm 5 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com HIGH Fax +34 937 862 493 TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

0 2594 mmEquipments Filter measure: 610x610 mm INFORMA- 2512 mm TYPE 4 2552 mm Filter measure: 915x610mm TION TYPE 5 3225 mm TYPE 7 3225 mm Filter measure: 1220x610 mm 1 Filter measure: 305x305 mm 194 Filter measure: 610x305 mm PRE- Filter measure: 915x305 mm FILTERS Filter measure: 1220x305 mm 2 Lamp panel: On request, measures from 420x420 to PAINTINGS 595x595 mm. BOOTHS In relation to filters according to scheme. 3 3733 mm COMFORT Venfilter [email protected] PRODUCTS Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE

Equipments 0 Metal Housing INFORMA- TION For 66 and 78 mm filters. Mounting elements 1 Terminal Diffuser for replaceable HEPA/ULPA filters, for PRE- air diffusion in Clean Rooms with turbulent and laminar FILTERS flow. 2 Technical features PAINTINGS Type: Diffuser Terminal unit for ceiling or wall installation for the BOOTHS final filtration of a Clean Room. Construction: Airtight welded electrogalvanized steel, white epoxy 3 paint (RAL 9010) and kiln dried. Air intake: At the top (HTMBS) or at the side (HTMBL), circular, with COMFORT an attachment neck. PRODUCTS Installation: Openings for attachment, which make for easy and quick fitting. 4 Filter attachment: In the lower part, against the smooth frame, one single piece and held by attachment devices that exert a continuous EPA/HEPA and constant pressure. /ULPA For filters: Filters of 69, 78 mm. in depth. We have a shallow model with upper air inlet (HTMBP) 5 Advantages HIGH TEMPERA- - Smmoth coating, facilitates cleaning the diffuser grid. - Internal centring devices for filters and fixed moutings for the positioning of the TURE filter inside the housing, preventing the filter from falling. 6 - Easy filter assemble and replacement. INSTALLATION: EQUIP- - Rigid construction design, allows quick and easy installation. MENTS - Installation in ceilings using side or upper entry. - Also equipped with four drilled brackets for suspended-type fitting. 7 MOTORS AND TURBINES 8 Steel plenum. Moutings for filter Probes for integrity testing Diffuser grids: PerfoNomi- ADSOR- retention. and differential pressure nal or ratational, painted TION AND measurement. in white (RAL 9010). DESODO- RIZATION Venfilter Tel +34 937 862 607 9 Fax +34 937 862 493 [email protected] 195 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments INFORMA- References TION HTMBL-Air intake at the side 1 Dimensions (mm) For Filters Neck PRE- BxHxP (mm) inlet FILTERS Reference A A1 A2 B B1 B2 H (mm) UxP* Stock* 2 HTMBL1212.2 367 264 319 367 264 319 290 305x305x66/78 150 1F HTMBL1224.2 672 569 624 367 264 319 290 610x305x66/78 150 1F PAINTINGS HTMBL1818.2 519 416 471 519 416 471 340 457x457x66/78 200 1F BOOTHS HTMBL2121.2 597 494 549 597 494 549 340 535x535x66/78 200 1F HTMBL2323.2 637 534 589 637 534 589 390 575x575x66/78 250 1F 3 HTMBL2424.2 672 569 624 672 569 624 390 610x610x66/78 250 1F HTMBL2436.2 977 971 929 672 569 624 390 915x610x66/78 250 1F COMFORT HTMBL2448.2 1282 1179 1234 672 569 624 390 1220x610x66/78 250 1F PRODUCTS HTMBS-Air intake at the top 4 Dimensions (mm) For Filters Neck EPA/HEPA BxHxP (mm) inlet /ULPA Reference A A1 A2 B B1 B2 H (mm) UxP* Stock* 5 HTMBS1212.2 367 264 319 367 264 319 340 305x305x66/78 150 1 F HTMBS1224.2 672 569 624 367 264 319 340 610x305x66/78 150 1 F HIGH HTMBS1818.2 519 416 471 519 416 471 390 457x457x66/78 200 1 F TEMPERA- HTMBS2121.2 597 494 549 597 494 549 390 535x535x66/78 200 1 F HTMBS2323.2 637 534 589 637 534 589 430 575x575x66/78 250 1 F TURE HTMBS2424.2 672 569 624 672 569 624 430 610x610x66/78 250 1 F HTMBS2436.2 977 874 929 672 569 624 430 915x610x66/78 315 1 F 6 HTMBS2448.2 1282 1179 1234 672 569 624 430 1220x610x66/78 315 1 F EQUIP- HTMBP-Shallow model with upper air inlet MENTS Reference Dimensions (mm) B B1 B2 H For Filters Neck UxP* Stock* 7 A A1 A2 BxHxP (mm) inlet (mm) 1 F MOTORS HTMBP1212.2 367 264 319 367 264 319 280 305x305x66/78 1 F AND HTMBP1224.2 672 569 624 367 264 319 280 610x305x66/78 150 1 F HTMBP1818.2 519 416 471 519 416 471 280 457x457x66/78 150 1 F TURBINES HTMBP2121.2 597 494 549 597 494 549 280 535x535x66/78 200 1 F HTMBP2323.2 637 534 589 637 534 589 280 575x575x66/78 200 1 F 8 HTMBP2424.2 672 569 624 672 569 624 280 610x610x66/78 250 1 F HTMBP2436.2 977 874 929 672 569 624 280 915x610x66/78 250 1 F ADSOR- HTMBP2448.2 1282 1179 1234 672 569 624 280 1220x610x66/78 315 TION AND 315 DESODO- RIZATION *UxP *Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 9 Venfilter INTER- NATONAL Tel +34 937 862 607 [email protected] NORMATI- Fax +34 937 862 493 www.venfilter.com 196 VE

Equipments 0 Technical Documentation INFORMA- TION HTMBL-Air intake at the top 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 Venfilter ADSOR- Tel +34 937 862 607 TION AND Fax +34 937 862 493 DESODO- RIZATION 9 [email protected] 197 INTER- www.venfilter.com NATONAL NORMATI- VE

0 Equipments Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com INFORMA- HTMBL-Air intake at the side Fax +34 937 862 493 TION 198 1 PRE- FILTERS 2 PAINTINGS BOOTHS 3 COMFORT PRODUCTS 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 INTER- NATONAL NORMATI- VE