Rebuildable Upper Ball Joints FRONT SUSPENSION SCREW IN SCREW IN BOLT IN SCREW IN BOLT INA | UPPERBALL JOINTS MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 21034 $4999 917 22320S $7499 ea 721 10105 $5499 ea K772 Steel Cap 917 2103402 917 22320 7499 ea'SCREW IN' Aluminum Cap 2999 ea 721 9033 2499 Extended +0.2\" 2499 917 22330 7° TAPER Stud OnlyAPPLICATION '68-'89 Chrysler. Also ts Howe, Finishline, Lefthander, AFCO, Port City, Dirt Works. Also ts upper taper of Pinto spindle. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 223001 $7499 ea 721 10101 $5499 ea K6024 Steel Cap 917 22300 7499 ea 2499'BOLT IN' Aluminum Cap 917 22330 2999 ea 721 90337° TAPER Stud OnlyAPPLICATION '63-'71 Chevy Pickup. Also ts Howe, Finishline, Masterbilt, GRT, American Made, Swartz, Bernheisel, Rocket, Shaw, Bulit, Rayburn, Harris, AFCO, Port City, and the upper taper of the Pinto spindle. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICEK5108 'BOLT IN'Steel Cap 7° TAPERAPPLICATION '67-'69 Camaro/Firebird, '70-'72 Monte Carlo, '64-'72 Chevelle, '68-'74 Nova, '64-'72 Cutlass, '64-'72 Lemans. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 223021 $7499 ea 721 10104 $5499 ea K5208 Steel Cap 917 22302 7499 ea'BOLT IN' Aluminum Cap 917 22360 2999 ea 721 9032 2499 ea10° TAPER Extended +0.5\" Stud OnlyAPPLICATION '71-'85 Impala, '70-'81 Camaro/Firebird/TransAm, '73-'88 Chevelle/Monte Carlo/Metric Cars, '78-'83 Malibu, '73-'87 Regal, '73-'88 Grand Prix, '73-'82 LeMans, '71-'94 Caprice, '94-'96 Impala SS, '75-'79 Nova, '82-'02 S-10 2WD. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 223011 $7499 ea 721 10103 $5499 ea K6136 Steel Cap 917 22301 7499 ea'BOLT IN' Aluminum Cap 917 22350 2999 ea 721 9031 2499 ea10° TAPER Stud OnlyAPPLICATION '73-'95 Chevy Pickup, '71-'76 Impala.D | TALL UPPER SCREW IN C | TALL UPPER SCREW IN ••BAAAvllLaoiwLlasbJflOreoinnItN.e2nT00dS,g.5e0o0m, .e7t5r0y,•BAAvLaiLlabJlOe inIN.5T00S, 1.000 PRICE change SCREW IN BOLT IN $4999 ea 1.000PART# MOOG# B | TALL UPPER BALL JOINTS917 21534 K772 - .500 4999 ea917 21134 K772 - 1.000 PART# MOOG# PRICE • Available in .100, .500, 1.000 917 22320S1 K772 $7499 ea PART# MOOG# PRICEE | TALL REPLACEMENT PINS 917 22332 .200 long $3299 ea 721 101051 K772 $5999 ea 917 22335 .500 long 3299 ea 721 101011 K6024• For 917-22320S1 917 223375 .750 long 3499 ea 721 9033 SIZE Replacement pin 5999 ea 917 223310 1.00 long 3499 ea 721 101041 2499 ea 721 9032 SIZE K5208 5999 ea 721 101031 Replacement pin 2499 ea 721 9031 SIZE 5999 ea K6136 2499 ea Replacement pinORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 99
FRONT SUSPENSION Lower Ball Joints SCREW IN PRESS IN SCREW IN PRESS IN SCREW IN PRESS INA | LOWER LOW FRICTIONBALL JOINTSMOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 20036 $1499 ea 106 20036 $3499 ea 106 20036LF $3999 eaK727 Steel Cap'SCREW IN' Aluminum Cap7° TAPER Stud OnlyAPPLICATION '60-'66 Chrysler, '71-'76 Impala. Most aftermarket tubular or strut type lower arms. Large taper late model cars.MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 20039 $1499 ea 106 20039 $2499 ea 106 20039LF $3999 eaK6145 Steel Cap 3599 ea'PRESS IN' Extended +0.5\" 917 20139 3599 ea10° TAPER Extended 1\" 917 20139 1APPLICATION '73-'87 Regal, '70-'81 Camaro/Firebird, '73-'88 Monte Carlo, '78-'88 Chevelle, '73-'88 Malibu, '77-'94 Impala/Caprice, '75-'79 Nova, '94-'96 Impala SS, '82-'02 S-10 2WD, '73-'88 Cutlass, '73-'88 Grand Prix, '73-'82 LeMans, Mini Stocks.MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 20043 $1999 ea 106 20033 $2499 ea 106 20033LF $3999 eaK5103 Steel Cap PRICE'PRESS IN' Aluminum Cap $3999 ea7° TAPER Stud Only PRICEAPPLICATION '67-'69 Camaro/Firebird, '70-'72 Monte Carlo, '64-'72 Chevelle, '68-'74 Nova, '64-'72 Cutlass, '64-'72 Lemans. $3999 eaMOOG # DESCRIPTION PART # PRICE PART # PRICE PART # 917 20038 1 $1699 ea 106 200381 $2499 ea 106 200381LFK6117 Steel Cap'PRESS IN' Aluminum Cap10° TAPER Stud OnlyAPPLICATION '73-'95 Chevy Pickup, '71-'76 Impala. 3⁄8\" longer stud, ts many Street and Hobby Stocks, and common on Modi eds to raise roll center.MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # 917 20038 $1499 ea 106 20038 $2499 ea 106 20038LFK6141 Steel Cap'PRESS IN' Aluminum Cap10° TAPER Stud OnlyAPPLICATION '71-'76 Impala, Rayburn, GRT, Warrior, Howe, and most wide-type dirt cars. TIE ROD BALL JOINT D | BALL JOINT •WERasEy bNalCl joHint removalB | TIE ROD AND BALL and installation F | DOUBLE••JOOBrpIeNeankTilnogoSssEeizetPieisAr2o1R⁄d32s”AafonTrdtObieaRrllojdoints ••• One end for upper and one end for lower SHEAR For screw-in style ball joints MOUNTING and 15⁄16” for ball joint Ultimate all-in-one front suspension tool ••BRESleiAmt oiCnf a4KteEs cTroSss shaft910 89610 Tie rod910 89600 Ball joint 910 452600 $3999 ea 916 45470C | BALL $1499 set•JOFitIsNboTthBOOT $999 ea E | UPPER G | ALUMINUM CROSS SHAFT upper and 999 ea ••MNWOeewlUds-NoinngTale-aprmosimtioonunmtsount has 2° of lower joints • Used for making adjustable a-arm 6\" center917 22399 $599 ea anti-dive built in 916 34309 6\" center to center $899 ea to center holes 916 34312 67⁄8\" center to center 1299 ea 106 20080 AFCO upper arm mount 2799 ea 910 34355 $4999 ea100 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Rebuildable Lower Ball Joints FRONT SUSPENSION SCREW IN PRESS IN SCREW IN PRESS IN SCREW IN PRESS INA | LOWERBALL JOINTS MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 21036 $4999 ea 917 22412S $7499 ea 721 10106 $5499 ea K727 Steel Cap 917 22412 7499 ea 'SCREW IN' Aluminum Cap 2999 ea 721 9034 2499 ea 7° TAPER Stud Only 917 2103602 2499 ea 917 22440APPLICATION '60-'66 Chrysler, '71-'76 Impala. Most aftermarket tubular or strut type lower arms. Large taper late model cars. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 21039 $4999 ea 917 224201 $7499 ea 721 10109 $5499 ea K6145 Steel Cap 917 22420 7499 ea 2499 ea 'PRESS IN' Aluminum Cap 2999 ea 721 9037 10° TAPER Stud Only 917 2103902 2499 ea 917 22470APPLICATION '73-'87 Regal, '70-'81 Camaro/Firebird, '73-'88 Monte Carlo, '78-'88 Chevelle, '73-'88 Malibu, '77-'94 Impala/Caprice, '75-'79 Nova, '94-'96 Impala SS, '82-'02 S-10 2WD, '73-'88 Cutlass, '73-'88 Grand Prix, '73-'82 LeMans, Mini Stocks. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 224211 $7499 ea 721 10110 $5499 ea K5103 Steel Cap 917 22421 7499 ea 'PRESS IN' Aluminum Cap 917 22480 2999 ea 721 9038 2499 ea 7° TAPER Stud OnlyAPPLICATION '67-'69 Camaro/Firebird, '70-'72 Monte Carlo, '64-'72 Chevelle, '68-'74 Nova, '64-'72 Cutlass, '64-'72 Lemans. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 215381 .500\" tall $4999 ea 917 224191 $7499 ea 721 10108 $5499 ea K6117 Steel Cap .375\" tall 4999 ea 917 22419 7499 ea 'PRESS IN' Aluminum Cap 917 210381 .500\" tall 2499 ea 917 22460 2999 ea 721 9036 2499 ea 10° TAPER Stud Only 917 21038102 917 22465 Stock 2999 ea Stud Only .500\" tallAPPLICATION '73-'95 Chevy Pickup, '71-'76 Impala. 3⁄8\" longer stud, ts many Street and Hobby Stocks, and common on Modi eds to raise roll center. MOOG # DESCRIPTION PART # PRICE PART # PRICE PART # PRICE 917 21038 $4999 ea 917 224131 $7499 ea 721 10112 $5499 ea K6141 Steel Cap 917 22413 'PRESS IN' Aluminum Cap 7499 ea 2499 ea 10° TAPER Stud Only 917 2103802 2499 ea 917 22430 2999 ea 721 9030APPLICATION '71-'76 Impala, Rayburn, GRT, Warrior, Howe, and most wide-type dirt cars.D | REBUILDABLE BALL•JOAvIaNilaTblWe inR1E3⁄4N\" aCndH17⁄8\"910 82161 $999 ea910 82162 13⁄4\" 999 ea SCREW IN PRESS IN SCREW IN PRESS IN 17⁄8\" PRICE C | TALL LOWER $4999 ea •BAAvLaiLlabJlOe inIN.5T00S, 1.000 PART# MOOG# SIZE 4999 ea 917 21536 K727 .500 4999 ea B | TALL LOWER BALL JOINTS 917 21538 K6141 .500 4999 ea 917 215381 K6117 .500 4999 ea • Available in .100, .500 917 21539 K6145 .500 4999 ea•E | BALL JOINT TOOL and putting 917 21136 4999 ea PART# MOOG# PRICE 917 21138 K727 1.000 4999 ea 721 101061 K727 $5999 ea Tool for taking apart, adjusting 917 211381 K6141 1.000 721 101091 K6145 together Speedway’s rebuildable ball joins 917 21139 K6117 1.000 721 101101 K5103 5999 ea• CNC machined from steel for a long life K6145 1.000 721 101081 K6117 5999 ea 721 101121 K6141 5999 ea910 89601 $2999 ea 5999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 101
FRONT SUSPENSION Upper Control ArmsA | UPPER CONTROL ARMS••IMRIMeCpClAAacaepMmpreOonvtDepdaIurFtpsIpliEestrDecdoSnbterloolwaramllos w easy ordering of crash parts1 910 34385 $8999 ea STYLE 1 STYLE 2 STYLE 32 910 34392 5999 ea PRICE3 916 74093 6999 ea3 916 74094 6999 ea $2199 ea 1999 eaREPLACEMENT PARTS REQUIRED STLYE 1 1699 ea STYLE 2 PRICE STYLE 3 LH STYLE 3 RH PRICECOLLAR 1 910 34361 1699 ea 910 34361 $2199 ea 910 34360 910 34359 $2199 eaMAIN SHAFT 1 910 34362 699 ea N/A N/A N/A N/ASHORT TUBE 1 910 34363 7 599 ea 910 34258 6 910 34258 5 910 34258 4 N/ALONG TUBE 1 910 34363 7.5 .99 ea 910 34258 7 999 ea 910 34258 6 910 34258 5 999 eaCLEVIS 1 910 02006 N/A 910 02006 999 ea 910 02006 910 02006 999 eaHEIM 2 175 0305 N/A 175 0306 699 ea 175 0306 175 0306 699 eaJAM NUT RH 2 175 0246 1299 ea 175 0246 599 ea 175 0246 175 0246 599 eaJAM NUT LH 2 N/A N/A .99 ea 175 0446 175 0446 .99 eaCONE SPACERS 1 N/A N/A N/A 546 4110 546 4110 .99 eaBALL JOINT 910 34323 910 34323 N/A 910 34323 910 34323 799 ea 1 1299 ea 1299 ea STRUT TYPE 1⁄2\" 5⁄8\" See CL 3⁄4\" Chart Below 6\" C | STEEL CLEVIS 1⁄2\" 20 RH STUD 3⁄8\" HOLE 5⁄16\" WIDE SLOT 910 02005 $599 eaB | STRUT TYPE UPPER CONTROL ARMS Speedway $699 ea 5⁄8\" 18 RH STUD 3⁄8\" HOLE 3⁄8\" WIDE SLOT 2499 ea 910 02006 $2499 eaSTRUT TYPE SPEEDWAY SPEEDWAY 106 10490 Speedway $1499 ea LENGTH ALUM SHAFT STEEL SHAFT OFFSET TYPE 71⁄4\" $3999 ea AFCO 71⁄2\" 917 20000 $3999 ea 5⁄8\" 18 RH STUD 1⁄2\" HOLE 3⁄8\" WIDE SLOT LH SHOWN 73⁄4\" $3999 ea N/A 106 10491 83⁄4\" 8\" 917 20000 1 N/A AFCO 81⁄4\" $3999 ea N/A 3⁄4\" 16 RH STUD 3⁄8\" HOLE 3⁄8\" WIDE SLOT SPEEDWAY 81⁄2\" 917 20001 N/A 910 02007 STEEL SHAFT 83⁄4\" $3999 ea N/A Speedway 917 20002S 9\" 917 20008 N/A 91⁄4\" $3999 ea D | TUBULAR UPPER 11⁄4\" $3999 ea 91⁄2\" 917 20004 917 20005S •COAvNailaTbRleOin LanAofRfseMt anSd CL SPEEDWAY 93⁄4\" $3999 ea $3999 ea STEEL SHAFT 10\" 917 20004 1 • aluminum or steel cross shaft 6\" 917 20003S $3999 ea 917 20009S Accept K6024 or K6136 style ball joints $3999 ea 917 20005 $3999 ea $3999 ea OFFSET TYPE SIDE SPEEDWAY 917 20009 917 20006S 83⁄4\" LH ALUM. SHAFT $3999 ea $3999 ea 917 20002 917 20006 OFFSET TYPE SIDE $3999 ea 917 20007S 83⁄4\" RH $3999 ea 917 20007 $3999 ea SPEEDWAY $3999 ea N/A ALUM. SHAFT 917 20007 1 917 20003 $3999 ea 917 20010S $3999 ea 917 20010 $3999 ea $3999 ea102 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Upper Control Arms FRONT SUSPENSIONG | UPPERCONTROLARM FOR 73⁄4\"••••CAUASDtvseoMeasciiwglkaAnilbteehlnRedgKitOnt6oh08b2i”se4, 98us11ts⁄⁄44ye””l,de8bw1⁄2ai”tl,lh8jos3⁄ti4no”,tc9k”m, 9o1⁄4u”n, 9t 1⁄2” LH, C C = 8.5” RH, C C = 8.0” ALUMINUM OR STEEL A | IMCA SPEC 67⁄8\" ••••STMUSBposOideeltc-wCtsiofiiyztKyehloeGKfuCtM5ro2Asrm0tor8RiecgstkhrtCiymtcleoOobnulanNyltlsjToiRntO(IMLCAAHRobMby, and Southern910 34397 SPECIFY Upper control arm $4299 eaH | MIDSIZE Stock cars, Northern Sport Mod)METRICUPPER 910 34393 SIDE Aluminum shaft $4499 eaCONTROL 910 34394 SIDE Steel shaft 4999 ea•ARReMclaiSmed ‘78-’87 GM midsize metric 916 34312 67⁄8” center to center upper mount plate 1299 ea upper control arms cleaned up and painted at black• Ball joints and bushings will need to be replaced• Specify LH or RH LH, C C = 8.5”910 34357 SIDE RH, C C = 8.0” $8999 ea B | METRIC ALUMINUM UPPER CONTROL 67⁄8\" LH, C C = 8.5” RH, C C = 8.0” 67⁄8\" ••••ARALUUHvpsMaepisilewa8rSbi.a5tlher”mawKn5bidt2oh0Rlts8Hstetsioestyl8yol.oe0ru”barlausltmlojocinkiunmmt ocurnotss shaft STEELJ | UPPER CONTROL ARM 910 31133 SIDE Aluminum shaft 67⁄8\"••FOUDseResiwgMnitehdEKtT7o7Rb2eIstuCysleeCdbHwaliltAjhoiSsnttoScIkSmount 910 31134 SIDE Steel shaft 916 34312 67⁄8” center to center upper mount plate $4499 ea 4999 ea 1299 ea910 34395 8.5 81⁄2” LH $4299 ea910 34395 9 9” LH 4299 ea910 34396 8 8” RH 4299 ea910 34396 8.5 81⁄2” RH 4299 eaK | STEEL BALL•JOUsIeNd Tto SLEEVE E | A ARM SHIMS C | TAPERED UPPER build or ••COFToaprNeursTeedRwtioOtheLlcimoAnintrRaotleMabrminSsdPoinngA6\"CbEolRt cSenters repair control arms •• Adjust camber and caster Package contains (4) 1⁄16\" and (6) 1⁄8\" shims910 34812 Fits 910-34323 upper $799 ea910 34814 Fits 917-20038 lower 799 ea 917 21003 $499 pk910 34816 Fits 917-20036 lower 799 ea910 34818 Fits 917-20038-1 lower 799 ea 457 14220 1⁄16\" Taper $1599 ea910 34820 Fits 917-20039 lower 799 ea 457 14230 1⁄8\" Taper 1599 ea 457 14240 1⁄4\" Taper 1499 ea 457 14250 Set – 1⁄32\", 1⁄16\", 1⁄8\", 1⁄4\" 4999 setL | WELD IN BALL F | TUBULAR 7\"JOINT SLEEVE •••U5US⁄P8ts”eerePowlduEitpehRpnKed6rAs0a2rRm4 Mstyle ball joint •D |A ARM SPACERTHREADED Flanged ts 106-20036 $1999 ea106 20041 For use in setting camber or106 20042 changing camber gain and roll center106 20043 Fits 106-20036 1999 ea 910 34410 Upper arm only $2499 ea •• 1⁄8\", 3⁄16\", 1⁄4\", 3⁄8\", 1⁄2\" thickness availableSMOOTH Fits 106-20034, 106-20035 1999 ea 175 0526 5⁄8” RH, 1⁄2” hole 1399 ea Use with 6\" bolt centers106 20044 175 0506 5⁄8” RH male 1299 ea106 20045 Fits 106-20039 $1999 ea 175 6046 5⁄8” RH jam nut, 6 pack 399 ea 917 21005 SIZE 1⁄8\", 3⁄16\", 1⁄4\" $599 ea106 20046 Fits 106-20038 1999 ea 910 34411 499 ea 917 21005 SIZE 3⁄8\" 699 ea Fits 106-20038-1 1999 ea Ball joint plate only 917 21005 SIZE 1⁄2\" 799 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 103
FRONT SUSPENSION Lower Control ArmsA | LOWERCONTROL•ARCleManSed and ball joints removed E | PRECISION BUMP STEER Specify LH or RH •GAMoUstGacEcurWateI,TeaHsiesBt aInLdLqEuiTckePstLwAayTtoE•• New bushings recommended for reclaimed arms measure your critical bump steer New precision plate, 3/8\" thick T6 Billet916 34300 SPECIFY ‘68-’74 Nova - NEW Stamping $10999 ea • aluminum for the ultimate in accuracy910 34290 SPECIFY ‘78-up Metric midsize 9799 up Anodized and laser engraved910 34294 SPECIFY ‘78-up Metric Impala - reclaimed 6999 ea ••• New compact frame910 62016 SPECIFY ‘78-’94 Metric Impala - NEW Stamping 7499 ea More rigid billet and tube910 35295 SPECIFY ‘68-’72 Chevelle - NEW Stamping design for the best accuracy916 73086 10499 ea ••• Bright dip anodized916 73087 Jet mod - left with ball joints/shock mounts 14999 ea Extended height design - check bump steer at ride height or on stands Jet mod - right with ball joints/shock mounts 16999 ea Includes new 3⁄8\" thick billet wheel plate with mounting holes for $14499 ea* Also ts ‘73-’77 Chevelle and ‘75-’79 Nova 1299 ea 14499 ea most 5 bolt patterns (41⁄2\" - 5\") and most wide 5 plus 4, 5 & 8 bolt drive flanges, adjustable stand and precision dial indicator CHEVELLE 1299 ea • Center hole is 31⁄4\" $2999 eaB | UMP LOWER 1 475 79005 Precision bump steer gauge with billet plate $25999 ea•COMaNdeToRf 1O1⁄4”LDA.O.RMMS 1999 ea 2 475 79121 Snap cap hub mounting stand-o s 4299 ea•• tubing for maximum strength Accepts press-in ball joints Spring will need to be installed NOVA with closed end down and open end up F | BUMPSTEER •GAPreUcisGioEn-ground steel• Rod end spacer kit needed for installation910 34293 SIDE ‘68-’72 Chevelle plate, bottle jack with910 34291 Spacer kit for 910-34293 adjustable height910 34296 SIDE ‘68-’74 Nova and location910 34292 Spacer kit for 910-34296 • Adjustable-height • gauges Slotted mounting holes on plate allow use of 41⁄2”-5” bolt circles without removing rotors •• Must be modified for four-lug use An exclusive design, our bumpsteer gauge features two gauges for fast, accurate readings of degree of toe-in change that occurs as theC | ROD END KIT front suspension moves up and down•• K727 style ball joints for screw-in 910 82700 $16999 ea K6141 style ball joints for press-inPRESS IN BALL JOINT MASTERSBILT106 20023K 3⁄4” Rod end kit for inner mount106 10820 Solid rod end for strut rod •G | TOE PLATE against the tire on each side Rest one of these plates and use a tape measure • Comes with two tape measures 475 7950 $5999 setD | GUN GREASE’S 14OZ. TUBES H | TOE GAUGE gauge for • High-tech aluminum measuring toe1 498 1275 Almaplex $1299 ea ••• Eliminates need for tape measure2 498 3752 Almagard 1299 ea Meaures in 1⁄16” increments3 607 10002 Synthetic grease 14 oz. 1299 ea 671⁄2” max width4 484 10484 G3 Racing grease 2499 ea5 484 105741 Red ‘N’Tacky 499 ea 300 8000 $6999 ea104 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Bushings FRONT SUSPENSIONUPPER CONTROL ARM BUSHINGSUSE PART #916 340## SPEEDWAY FOR STEELUSE PART #916 345## SPEEDWAY FOR URETHANE USE PART #106 200## AFCO FOR STEEL A|MODEL YEAR SPEEDWAY URETHANE SPEEDWAY STEEL AFCO STEEL UPPER A ARM SEE APPLICATION CHART AT LEFT FRONT REAR FRONT REAR FRONT REARIMPALA & ‘71-’73 40 40 40 40 99 99 SPEEDWAY URETHANE O.D. X I.D. PRICECAPRICE ‘74-’79 41 40 41 40 98 99 916 34539 $899 eaCHEVELLE, ‘80-’96 41 41 41 41 98 98 916 34540 1.275 x .670 899 eaMONTE CARLO ‘74-’77 41 40 41 40 98 99 899 eaMONTE CARLO ‘73 40 40 40 40 99 99 916 34541 1.310 x .688 899 ea& MALIBU ‘67-’72 39 39 39 39 78 78NOVA ‘78-’88 42 42 42 42 79 79 916 34542 1.385 x .688 PRICECAMARO $999 eaREGAL ‘75-’79 1.480 x .688 999 eaFIREBIRD ‘68-’74 999 ea ‘71-’79 UPPER A ARM SEE APPLICATION CHART AT LEFT 999 eaCUTLASS ‘67-’69 SPEEDWAY STEEL O.D. X I.D. ‘78-’’88 916 34039 PRICE ‘75-’79 41 40 41 40 98 99 916 34040 1.275 x .670 $2799 ea ‘70-’74 39 39 39 39 78 78 ‘67-’69 41 40 41 40 98 99 916 34041 1.310 x. 688 2799 ea ‘78-’88 39 39 39 39 78 78 2799 ea 42 42 42 42 79 79 916 34042 1.385 x .688 2799 ea 41 40 41 40 98 99 40 40 40 40 99 99 1.480 x .688 39 39 39 39 78 78 42 42 42 42 79 79 AFCO STEEL O.D. X I.D. $899 ea $899 ea $999 ea $999 ea $2799 up $2799 up 106 20078 1.275 x .670 106 20079 1.530 x .688 106 20098 1.385 x .688 106 20099 1.310 x .688 B|LOWER CONTROL ARM BUSHINGS LOWER A ARM SEE APPLICATION CHART AT LEFT SPEEDWAY URETHANE O.D. X I.D. PRICEUSE PART #916 340## SPEEDWAY FOR STEEL 916 34546 $1499 eaUSE PART #916 345## SPEEDWAY FOR URETHANE USE PART #106 200## AFCO FOR STANDARD STEEL 916 34534 OvalUSE PART #106 200## AFCO FOR STEEL USE PART #106 200##LW AFCO FOR L.W. STEEL 1299 ea 916 34535 1.400 x .500 1299 ea 1299 ea SPEEDWAY AFCO AFCO 916 34536 1.450 x .500 1299 ea URETHANE 1299 eaMODEL YEAR FRONT REAR SPEEDWAY STEEL STANDARD STEEL L.W. STEEL 916 34537 1.650 x .500 37 38 FRONT REAR PRICE FRONT REAR FRONT REAR 916 34538 1.650 x .563 $1499 ea 37 38IMPALA & ‘71-’96 76 77 76LW 77LW 1.910 x .563 1499 eaCAPRICE 1499 ea LOWER A ARM SEE APPLICATION CHART AT LEFT 1499 ea SPEEDWAY STEEL O.D. X I.D. 1499 eaMONTE ‘75-’77 37 38 37 38 76 77 76LW 77LW 916 34030 1499 eaCARLO & ‘73-’74 34 38 34 38 75 77 75LW 77LW 916 34034 1.400 x .500 x 3.00 PRICECHEVELLE ‘67-’72 34 36 34 36 75 76 75LW 76LW $2799 ea OVAL 34 46 916 34035 1.400 x .500 x 2.40 2799 ea 2799 eaMONTE 35 36 35 36 69 76 69LW 76LW 916 34036 1.450 x .500 2799 eaCARLO & 37 38 37 38 76 77 76LW** 77LW** PRICEMALIBU* ‘78-’88 36 36 36 36 76 76 76LW** 76LW** 916 34037 1.650 x .500 $4699 eaNOVA 36 34 36 34 76 75 76LW** 75LW* 4699 ea ‘75-’79 37 38 37 38 76 77 76LW** 77LW** 916 34038 1.650 x .563 4699 eaCAMARO ‘73-’74 34 36 34 36 75 76 75LW 76LW 4699 eaREGAL ‘68-’72 35 36 35 36 69 76 69LW 76LW* 1.910 x .563FIREBIRD ‘73-’79 37 38 37 38 76 77 76LW* 77LW ‘67-’72 34 36 34 36 75 76 75LW 76LW AFCO STANDARD STEEL O.D. X I.D. ‘78-’88 106 20069 2.94” long 1.400 x .500 ‘73-’79 106 20075 2.39” long 1.400 x. 500 ‘67-’72 106 20076 1.650 x .500 106 20077 1.900 x .563CUTLASS ‘78-’88 35 36 35 36 69 76 69LW 76LW AFCO LIGHTWEIGHT STEEL O.D. X I.D. $1299 ea $1299 ea $1499 ea $1499 ea $2799 ea $2799 ea $4699 ea $4699 ea 106 20069LW 2.94” long 1.400 x .500 106 20075LW 2.39” long 1.400 x. 500* Must drill frame for 1⁄2” bolts 106 20076LW 1.650 x .500 106 20077LW 1.900 x .563 IMCA/UMP MODIFIED FOUR BALL JOINTS AND FOUR LOWER BUSHINGS 106 2001007 ‘67-’72 Chevelle with screw-in upper ball joint $31999 ea 106 2001009 ‘67-’72 Chevelle with bolt-in upper ball joint 31999 ea 106 2001008 ‘78-’88 GM Midsize Metric with screw-in upper ball joint 31999 ea 106 2001010 ‘78-’88 GM Midsize Metric with bolt-in upper ball joint 31999 ea STREET STOCK FOUR BALL JOINTS AND EIGHT CONTROL ARM BUSHINGSC | AFCO LOW FRICTION 106 2001001 ‘66-’72 Chevelle, Monte Carlo, LeMans, Cutlass $36999 ea•SUIncSluPdeEfNouSr eIaOchNof KITS ‘67-’69 Camaro, ‘68-’74 Nova AFCO’s low 106 2001002 ‘78-’88 GM Midsize Metric 36999 ea friction ball joints lower control 106 2001003 ‘70-’72 Camaro, Firebird, ‘73 Chevelle 32999 ea arm bushings 106 2001004 ‘75-’79 Camaro, Firebird, Ventura, ‘74-’79 Firebird•• Increase ability to transfer weight ‘75-’77 Chevelle, Monte Carlo, Regal Cutlass 36999 ea Frees up suspension 106 2001006 ‘82-’92 Camaro, Firebird strut style 21999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 105
REAR SUSPENSION Torque Links & SpringsHardM, edui mS,oft••••A | LIGHTWEIGHT BISCUIT BAR length Comes with an 10” sleeve that gives you a 22” center-to-center installed F | PULL BAR SPRINGS If a different length is required, simply order a different length sleeve Replacement biscuits are available in three durometer ratings •• Available in 4”, 6 ¾”, or 7” free heights Two biscuits needed per bar Guaranteed consistency with in 2%910 45509 Biscuit bar $9799 ea •• of advertised rate910 34234 SPECIFY 999 up Lifetime warranty910 45515 BLK Sleeve 9”-30” and 37” 5” outside diameter910 45515 RED Black biscuit - hard #88 1299 ea910 45515 BLU Red biscuit - medium #73 1299 ea Blue biscuit - soft #60 1299 ea 4” LINEAR 330 400 $6099 ea 6 3⁄4” PROGRESSIVE 400, 450, 500 lb. $6099 ea 17\" 330 675 500 500-1000 lb. 6099 ea 330 675 600 750-1500 lb. $6099 eaB | LIGHTWEIGHT SPRING 7” LINEAR•ANUtiDlizePs aUsoCft,K4”sPprUingL(LsolBd sAepRarate) to initiate 330 700 8999 ea 600 or 800 lb. 8999 ea••••••• traction then amplify it as pucks engage G | 5” TORQUE $3999 ea Washers available in 0, 5, 10, and 15 degree tapers •LIDNesKignSePd sRpeIcNifiGcalSly for 9799 set Pucks available in 60, 70, 80, or 90 durometers Smaller size reduces unsprung weight and helps with clearance issues use on IMCA type torque Innovative puck and washer system creates the most tunable, longest lasting pull bar on the market links and pull bars Washers and pucks will retro fit most any 3/4” shaft pull bar Includes: (4) 90 durometer pucks, (2) 0 deg. washers, (3) 15 deg. washers • 5” O.D. x 65⁄8” tall Additional replacement parts available online910 45601 Pull bar, pucks & washers $29999 ea 106 32 600-1300 lb.910 45650 SPECIFY Puck – 60, 70, 80, 90 durometer 1999 ea 106 33 600-2000 lb.910 45660 SPECIFY Washer – 0, 5, 10, 15 degree 999 eaC | LIGHTWEIGHT•PUOnClyKbaPr oUn tLheLmBarAketRthat can be single, 201⁄2\"• double, or triple stage compression BUY 3 Utilizes pucks to initiate traction then amplify AND SAVE 4.5” O.D. it as bar locks out and more pucks engage••••••• Washers available in 0, 5, 10, and 15 degree tapers 7” TALL Pucks available in 60, 70, 80, or 90 durometers Reduces unsprung weight up to 7 lbs. over other triple stage bars and helps with clearance issues H | PROGRESSIVE Innovative puck and washer system creates the most tunable, longest lasting pull bar on the market •PUChLooLseB6A00R-12S00P, 9R00I-N13G00Sor Washers and pucks will retro fit most any 3/4” shaft pull bar Includes: (2) 80 durometer pucks, (5) 90 durometer pucks (2) 0 deg. washers, (6) 15 deg. washers Additional replacement parts available online910 45621 Pull bar, pucks & washers $34999 ea • 1000-1600 lb. rates910 45650 SPECIFY Puck – 60, 70, 80, 90 durometer 1999 ea Designed for racing demands910 45660 SPECIFY Washer – 0, 5, 10, 15 degree 999 ea 875 507 RATE One spring 875 5073 Set of three E | PULL BAR COVER 67⁄8\" • Keeps dirt and debris out of your pull barD | OUTLAW •••• Denier material••BEU22sA1e⁄4s”R5m”IisNnp,r2Gin8g1⁄4Ps” mUaLx eLyeB-toA-eRye Fits 5” O.D. spring 7” Length J | MODIFIED ADJUSTABLE Available in Black, Blue or Red PULL BAR BOLT910 25115 Pull bar $23999 ea 564 2608 COLOR Pull bar cover $2499 ea 916 73075 Pull bar bolt $2699 kit106 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Torque Links & Springs REAR SUSPENSIONE | CHASSIS LIMITER• Reduces tire unloading when suspensions top out• Easily mounted to a chassis by using a 1⁄2” rod end• Clevis provided for simple BUSHING BUSHINGS attachment to a chain or cable INCLUDED INCLUDED• Yellow (75 durometer) bushing included106 20478 Chassis limiter $7699 ea •A | THREE STAGE TORQUE LINK Adjustable progressive action for ultimate torque control and traction • Engagement point of the poly bushings can be adjusted independently from the coil springF | REPLACEMENT •• Allows corner entry and exit to be tuned separatelyBUSHING KITS Bushing/spring pre-load is always maintainedDESCRIPTION PART # PRICE 106 21207X Torque link only $38999 eaRed brake bushing Kit - (1 bushing & 2 washers per kit) 106 21209UK $2299 kit 106 31 RATE 5” AFCO Torque link spring 5999 eaDESCRIPTION 21⁄4” OD PRICE 33⁄8” OD PRICEGreen - 50 Soft 106 212093G $2899 ea N/A N/APurple - 60 106 212093P 2899 ea N/A N/AYellow - 75 106 212093Y 2899 ea 4999 eaBlue - 80 106 212093B 2899 ea 106 21208Y 4999 eaRed - 87 Hard 106 212093R 2899 ea 106 21208B 4999 ea 106 21208R BRAKE BUSHING INCLUDED B | DUAL SHAFT URETHANE •BUBuSiltH-inItNravGel TORQUE LINKG | ALUMINUM travel and•••••6TNCIU9n1oHsec⁄2emwl”uwmedCdsieietnOhwss,i1g5i1⁄t2Itn2h”Lh3ra6⁄4oal”0ldno0mdwelabn6sx.dtihsetpytcoreoin-sitlgwom-ievoyeuelnintsabllefloouwr directions indicator to monitor acceleration deceleration travel910 25110 ••• Heavy duty design to handle open class modified motors Add a second brake bushing for even wider brake tuning options Includes brake bushing but torque bushings sold separately $9799 ea 106 21206X Torque link only $28999 ea 106 21208Y 4999 ea 106 21208B Yellow torque bushings only – soft 4999 ea 106 21208R Blue torque bushing only – medium 4999 ea 106 21209UK Red torque bushings only – hard 2299 ea Brake bushing kit only C | DUAL SHAFT •TOUsResQ5”UO.ED. LINK by 65⁄8” springs, sold separatelyH | 5TH AND 6TH COIL MOUNTS •• Use a 1050 lb. springs on slick tracks and 1200 lb. springs normally Subtract 16” from finished center to center•••• Holds 5th and 6th coil assembly Mounts on 11⁄2” square tube or 11⁄2” round tube 106 21205X Dual shaft torque link (spring sold separately) $35999 ea Complete with quick pin for shock Made from aluminum1 917 21010 Square tube $3699 ea D | POLY BUSHING2 917 21015 Round tube 3699 ea •••••PUHROS2o0oauL1ldrtd⁄d2lL”aeewwlnnBeidtenbhAdgieontasuchRhrltiuanpdfgtoeldy bushingJ | PROGRESSIVE $8999 ea 910 25116 Pull bar only $24999 ea•••5TSWSotHiiffdtfesiCneriactOnoiagnlIedrLaaotrefSypipPmrreopR-lvrooiIdavNdeessaGqdfoujuriwcsktamrdenbtite 910 45518 8499 ea 910 45517 Double bushing - blue or red 5999 set application of torque to rear tires 910 45516 Bushings with washer - blue or red 2999 ea106 20087PR AFCO 5th arm spring Bushing only - blue or redORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 107
REAR SUSPENSION Spring Sliders 16\" COMPRESSED, 24” EXTENDEDA | DELUXE OUTLAW 910 45565 Standard version $15999 ea•••••BE2SMIPnl”uiAcedlllaoluepRsnrduiganeIrecesNdrcsteesw2Gshp4oiatg”sf1nSte⁄12xv”a0Ptelr”eloro-Rns1dwid5oIes”enNndeloadaGanvssnagyidlaS5ad1”bL6jOlue”Is.DcDftoom.rlsElepalonpRrnitsnsgegedsr springs 910 45568 2” longer shaft version 16499 ea 910 45566 Rebuild kit – standard version 5799 ea 14\" COMPRESSED, 221⁄2” EXTENDED 910 45569 Rebuild kit – 2” longer shaft version 6499 ea 910 45561 Shaft only – standard version 3199 ea 910 45563 Shaft only – 2” longer shaft version 3199 ea 910 45562 Slotted plate only 3199 ea 910 45564 Top plate only 3199 ea 910 45567 Lynch pin only 299 eaB | COIL SPRING SLIDER D | COIL ELIMINATOR COVER•• Oillight bronze shaft bushing, results in a bind-free slider •• Shockwear fit 5” diameter springs Bronze bushing also resists damage from debris and Two lengths - 13 or 16” requires just a light grease to keep the slider smooth 564 30261 SIZE $4399 pr 10” to 15” tall, 5” diameter spring can be used•••• Jam nut allows you to make quick adjustments Internal stop keeps the slider in place when jacking up the car Spring sold separately910 45555 Coil Spring Slider $7999 ea910 89808 Slider ratcheting wrench 999 ea910 45490 Rebuild kit324 025 Anti-seize 2999 ea 1599 ea E | DUAL BEARING ••••SPLFSIniehnRnaaeotfIautvNrsraetbtasiGavbfleliinlsiqSzehuiantLihfcgtkrIbeiDncaeltdiaepErsrinrnReagllepaissetoannd Torrington bearing adjusting nut for effortless chassis adjustments • Available in standard (24”) or 2” coarse thread extended (26”) lengthsC | XD COIL SPRING SLIDER linear bearing 910 45251 Standard length slider $19999 ea 910 45252 2” extended length slider 19999 ea••••• Can run 20x more side load than standard 910 45260 2999 ea Has 5x the life of standard bearing 910 45259 Adjuster wrench 5999 ea Slotted plate for fast spring changes 910 45253 Rebuild kit 2499 ea Spring retainers are 2” high 910 45254 2499 ea Double lip dirt seal 910 45255 Standard length shaft only 2499 ea 910 45256 2\" extended length shaft only 2199 ea910 47540 XD coil spring slider $18999 ea 910 45257 5\" spring cup with clip 4399 ea910 475402 2” long XD coil spring slider 18999 ea 910 45258 5\" spring cup adjuster side 2399 ea Adjuster nut with lock Lock with bolt & pin108 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Panhard Bars REAR SUSPENSION ADJUSTABLE 20” ADJUSTS FROM 19” 21” 22” ADJUSTS FROM 21” 23” 24” ADJUSTS FROM 23” 25” A | LIGHTWEIGHT CHROMOLY ••••ADACMMhdaaJojdduiUeecsetwoeSofrit4fToh13nA331⁄⁄4o20””Bn,che4heL1eri⁄2omEn”mdosProth5lyAa1⁄t2t”uNabdllirHonowgpAs aRppDroxBimAatRely 2” of adjustmentD | PANHARD BAR heims• Steel panhard bar with 3⁄4”1 910 45511 LENGTH Chromoly 9”-37” - *tube length $4499 up 916 45529 LENGTH 31⁄2”- 20”, 22” or 24” $7999 ea2 916 4551 261⁄2” eye-to-eye straight 3599 ea 916 45534 LENGTH 41⁄2”- 20”, 22” or 24” 7999 ea3 916 45504 Adjustable to a maximum of 261⁄2”. Threaded 5499 ea 916 45538 LENGTH 51⁄2”- 20”, 22” or 24” 7999 ea slug must be welded in. Bar can be shortened as needed. 3.5” drop4 917 20158 Rubber bushed J bar -19”-22” adjustable 9499 ea 5.5” drop 917 20159 1199 ea5 916 45580 Replacement bushing for 917-20158 7999 ea 30” eye-to-eye••E | DOUBLE ADJUSTER ••••B | PANHARD BARS Machined stainless steel thread Steel panhard bar with 3⁄4” ends Adjusters have 21⁄2” of RH and LH Choose 31⁄2” or 51⁄2” of bend Long end can be cut to length910 12500 3⁄4” x 51⁄2” $2799 ea Welding required910 12501 3⁄4” x 61⁄2” 2899 ea910 12502 3⁄4” x 71⁄2” 2999 ea 1 106 20224K 31⁄2” $9999 ea910 125 5⁄8” x 41⁄4” 2499 ea 1 106 20224K1 51⁄2” 11899 ea 2 106 20224B Weld bushing only 1199 eaF | RUBBER BUSHINGS• Replacement bushings for top links and panhard bars910 45503 Bushing $599 ea910 45504 Replacement washers 699 ea C | ALUMINUM PANHARD •MDOesUignNedTtoFreOplRaceQthUe yIoCkeKseCalHplaAteNonGEG | LIGHTWEIGHT Champ or Sprint style quick changes•••PIISMMNtaeCkeIAelOclaeodNgnjaustlsPrtumLcetAinotnTs wEitWh juIsTt oHneStoEolAL •• 3⁄4” stud can be switched to either side Hardware included910 7048 $12499 ea 1 916 45005 Replacement adjustable bolt $13499 ea 2 916 45007 13499 ea 4299 ea 916 45531 109ORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com
REAR SUSPENSION Mounts E | STEEL PANHARD BAR MOUNT FOR •••QH23U⁄41a”⁄2rI”adCdowjfKuaasrdteaCjuibnsHlctemlusAtdeuneNdtd GEA | 9” FORD PANHARD PINION MOUNTS 916 45003 Panhard bar, steel $8999 ea 916 4047S Replacement adjustable bolt 4299 ea• Drilled for LH or RH mount $2199 ea1 106 20220 Steel – LH or RH mount $4999 ea F | STEEL 9” FORD $6999 ea2 106 202201 Steel – Double sided with bottom mount 7699 ea $8999 ea3 106 20296 Steel – LH or RH with bottom mount 9999 ea PANHARD BAR •MSOevUeraNl mToIuNntGingBhoRleAs tCo aKdjEusTt roll center •• IMCA approved Fits 9” Ford rear ends 916 45512 Panhard bar mounting bracket, steel 51⁄2\"B | PANHARD G | 9” FORD••BASFiitnRsg3leB” amRxoleAutnuCtb, cKelaEmTp-on style panhard bracket STEEL PANHARD •BAAllRowMs yoOuUtoNmoTve the916 45524 Panhard bar bracket $6999 ea bar in 5⁄8” increments For 3⁄4” rod ends •• Includes spacer 916 45002 Panhard bar mount, steelC | STEEL PANHARD H | ADJUSTABLEBAR MOUNT •PASteNelHbrAacRkeDt allBowAs RyouBtoRcAhaCngKeET9••••F1O6CDH3⁄44aae”R5nrssd0itgbuw09ned0ae”sradwelFlPtoiitnoawOcnchfhsliuetRa2ddtr1dheD⁄2tebd”oaoperfoimtaphdouejuluranssrtti,9dms”teeeFenoltrd panhard bar height without changing the length (based on a 26” radius)916 4047S Replacement adjustable bolt $9499 ea •• ¾” I.D. 4299 ea Fits 1 ½” tubing 916 45486D | STEEL ADJUSTABLE J | FORD 9 INCH STEEL ARC CLIMBER $12499 ktPANHARD BAR $12499 ea ••PI3KN”eesIlpoOst toNrnacakMrclinfOoerdUq-uuNpiclkeTaftdKtjouIsrTtigmhetnts•••AXS3Ct”lauLomdfEapisdsM3j⁄t4uo”sOt3m”UaexnNlte tTubes 4299 ea 910 45591916 45585 Steel adjustable panhard bar axle mount916 45531 Replacement adjustable bolt110 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Mounts REAR SUSPENSIONF | ARC FRAME $14999 ea A | STEEL QC PINION MOUNTMOUNT CENTER 14499 ea••OCSFtoemTeleUAsrwBc ictElhimbbacinkgnfuratmanedmcloimunbter gear ••• Comes with climber gear for easy and fast adjustments Works on an arc to keep your rearend tracking right910 45592 11⁄2” square tube Made of high grade steel for unmatched strength910 45594 2” square tube 1 910 45219 Single $12499 ea 2 910 452191 Double 13499 eaG | SPORT MOD FRAME MOUNT B | STEEL DOUBLE ••SLCFoaOrn1Tb1e⁄2\"FfoliRpr p2A\"edsMqeuitEahreeMrtuwbOaeyUonNthTe tube to give you•• Clamp on steel climber frame mount for rear panhard bar tube Angle slots keeps rear end track lined up fits 1½” or 2” square910 45593 11⁄2” tube $14499 ea • three options for J-Bar lengths in one mount910 45597 2” tube 14499 ea Comes with all hardware 910 45271 $16999 ea $11999 eaH | LIMIT CHAIN AXLE CLAMP 2499 ea•• Fits 3” axle tube | AXLE TETHER Features double shear tabs Tie down for the Left Rear910 45293 $2799 ea C Includes axle limit chain and •• biscuits 1 910 3160 Axle Tether 2 910 3140 Fram clamps for frame 11⁄4”, 11⁄2”, 13⁄4”, and 2”J | QUICK ADJUST | CHAIN HOLDER•••STAYAolvElouaEiwlcaaLsbnyleLomufIoaMtkroe1c¼cIhhT”aa,n1iCng3⁄8eaH”d,y1joAuu½sIrt”mNc, h1ea¾nMitn”solOiernn2sUg”ettchNuobbnTeydsssiwmipthlynpoutlolinoglsa pin. D Includes axle limit chain Does not include axle mount ••910 45269 $6499 ea 1 910 3170 Chain holder $7499 ea 2 910 3140 Fram clamps for frame 11⁄4”, 11⁄2”, 13⁄4”, and 2” 2499 ea E | BEARING CHAIN HOLDERK | LIMIT CHAIN FRAME MOUNT ••••• New design is ligther and cleaner No snap ring to break• Adjustable chain mount allows you to align your chain Allows chain to rotate freely properly and adjust the length without unhooking the chain Chain pulls straight on rearend housing•• Comes complete with clevis, adjuster, and mount Keeps from lifting the rearend Order to fit 11⁄4\", 13⁄8\", 11⁄2\", 13⁄4\", or 2\" tube 1 910 7106 Bearing chain holder $10999 ea910 452141 $4999 ea 2 910 7018 Axle chain holder 4499 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 111
REAR SUSPENSION Mounts SINGLE MOUNT DUAL MOUNTA | SWING ARM E | STEEL PANHARD BAR •FREaAchMhavEe MOUNTS910 45505 19” arm – Speedway Motors $5999 ea bolts and accept a 3⁄4” panhard bolt916 73073 16” – Jet Mod/Viper 6499 ea two 1⁄2” mounting910 45507 Adjuster 1399 ea175 0107 3⁄4” RH heim 999 ea 916 45487 Single mount for 11⁄2” square tube $3499 ea 916 45495 Single mount for 2” square tube 3499 ea WELD ON CLAMP ON 916 45489 3899 ea 916 45496 Dual mount for 11⁄2” square tube 3899 ea 916 45497 Dual mount for 2” square tube 6499 ea Aluminum for 2” square tubeB | COIL/SHOCK LOWER LINK MOUNTS F | STEEL FRAME SLIDER••• Locates 2-link control arm to rearend housing • Allows movement of panhard bar without changing length Mounts shock and slider assembly Fits 3” axle tube 916 45493 1.5 11⁄2” square $8999 ea 916 45493 2 2” square 8999 ea917 20155 Weld-on $3999 ea917 20156 Clamp-on 5999 ea | PANHARD BAR MOUNT Clamps on to 11⁄2” square tubing Accepts 3⁄4” heim Forged steel Yellow zinc plated Fogred••••G 916 45525 $2999 eaC | BEHIND REAREND H | Z LINK /SLIDE MOUNTPANHARD BAR••BRFFoitAus r3C3”⁄4Ka”xhlEeolTteusSbe $2999 ea •• Allows easy adjustment 4799 ea Accepts 5⁄8” rod end916 45513 Weld-on - 4 hole916 45516 Clamp-on - 6 hole 916 45528 11⁄4” tube $2999 ea 916 73065 11⁄2” tube 3299 ea J | ALUMINUM 3 HOLE PANHARD BARD | AFCO COIL OVER •••BSAFRitlteuAsem2lC”iinnxKus2emE”rtoTirn1t1h⁄2e”•CL2 ApieMcePclaBmpR-oAnCreKarEaxTle x 11⁄2” square tube middle hole• mount for coil-overs 916 45498 2” square $6999 ea Uses axle wrap to load or unload 916 45499 11⁄2” square 6999 ea tire closest to clamp•• For 3” axle tubes K | STEEL SPACER 5” or 7” drop lengths 910 07000 3⁄4” x 1⁄2” steel spacer106 20140 5” drop $8999 ea 910 07001 3⁄4” x 1” steel spacer $399 ea106 20141 7” drop 8999 ea 499 ea112 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Mounts REAR SUSPENSIOND | 9” FORD LINK MOUNTS•• Mounts top link and 90/10 shock Mounts top link 91⁄4”, 103⁄8” or 113⁄8” above axle center line917 20402 Mounts $1999 pr916 45502 Damper mounts 1999 set A | TORQUE TOP LINK BRACKETS • 8° pinion angle allows torque link to be 4” ahead and 12” above axle centerline •• Made of steel Design increases pull bar angle and forward bite 1 106 20407 9” Ford $5999 pr 2 106 20406 Quick change 5999 prE | 9” FORD TOP LINK MOUNTS••• Mounts top link and 90/10 shock Made of 3⁄16” steel Mounts top link 131⁄2” above axle center line916 45480 Mounts $2999 pr916 45502 Damper mounts 1999 setF | 9” FORD TOP LINK MOUNTS $5999 pr B | HEAVY DUTY REAR FOUR BAR KIT 1999 set916 73092 Mounts • Includes frame brackets, rearend brackets, upper and lower shock916 45502 Damper mounts brackets, 3⁄4” rod ends, jam nuts and 14” threaded 1” O.D. tubes, bolts and washers LEFT 916 49069 Four-bar kit $35999 kitG | JET RACING RIGHT C | TWO PIECE SPLIT 1⁄2\"2 LINK SPORT •••RITWANalolborGwkhsasFsgrer1Oe⁄t2a”aitRhnwoelr3iettho”bbiTredUrceamBgeoEsveSd easily•••MBSNOteertowDtnedrgeBpeseri,RgrlfanoAsrStmpCloaonnKrgtcMeeEroTdSbrackets $999 ea $9499 ea 910 45521 Two piece split ring 1199 ea910 45595 Left 8499 ea 910 45523 Two piece split ring with tab910 45596 Right 113ORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com
REAR SUSPENSION Birdcages & Brake FloatersA | 2 LINK BIRDCAGE parts •••H | BEARING BRAKE FLOATER• Allows you to replace damaged One bearing design and run different shock drops Fits metric caliper• 2 piece ring design Includes retainer rings910 45590 Birdcage $13999 ea 910 45534 Floater $14499 ea 910 45525 3” split retainer ring 899 ea E | ULTIMATE STEEL •••BI4DFRi-utlsianDLlkHbCse/wRaAiHrninGggaEdrmeWs,i2g-nIliTnkH BEARINGB | LOWER 910 45558 Birdcage $23999 ea 910 45556 Replacement bearing 3299 ea•SPWReldINs toG3”PaxEleRtuCbHe for mounting conventional coil springs• Fits spring 3 ⁄ ” O.D. to 5” O.D.917 20243 Speedway $1299 ea106 20156 AFCO 2999 ea J | STANDARD STEEL BIRDCAGE WITH •SHHaOs tCwoKupMpeOr anUdNlowTer F | 90° STEEL 5⁄8” arm mounting holesC | LIGHTWEIGHT ••SHAMlolOouwnCstsmKtooMvsetemOeel bnUtirodNfcasThgoecsk eye to • For 3” tube axles••SPFCioRtsmIsepNsriinGngtswP3o”EsI.tRDy.lCetsoH, 5o”ffOse.Dt and regular prevent eye from breaking off 910 45545 Birdcage with mount $9799 ea 910 45533 Mount with clevis 910 45525 3” split retainer ring 899 ea 910 45539 Clevis only917 2045 2”O set spring perch $2299 ea $5999 ea917 2046 Centered spring perch 2199 ea 3499 ea G | ALUMINUM K | DOUBLE SHEAR 2•••• LINK MOUNT RIGHT •••SHASCtodaOmjnudesCtasarKwbdlie1tMh5fo°sOhran5o.gcU0kl”e,Np6in.0T” & 7.0” drop LightweightD | CLAMP ON Increased strengthSPRING PERCH IMCA approved LH side or RH side910 45522 R Spring perch 5999 ea 910 45535 Mount with clevis $7499 ea 910 80011 LH side $15499 ea 910 45539 Clevis only 3499 ea 910 80010 RH side 15499 ea114 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Birdcages REAR SUSPENSIOND | DOUBLE SHEAR $20999 ea•MKOit cDomUeLs wAitRh a2xleLcIaNmpK, shBoRckAplCateK, dEoTuble shear plate, swivel shock mount and all the hardware910 454004E | WHEEL WELL COMPASS• Marks your body for a clean A | STEEL BEARING SUSPENSION CAGES line to cut your wheel well • Split plate design allows you to change plates if you need to without910 45295 $7999 ea removing the hub, brake, and cage • Comes with clamp rings and all hardware 1 910 452001 LR brake combo cage w/clamp ring no shock mounts $39999 ea 2 910 452002 LR brake combo cage narrow double shear 41999 ea 3 910 452003 Lightweight LR bronze double shear quick adjust cage 23999 ea Narrow RR double shear cage 25599 ea 910 452012 Lightweight RR bronze double shear quick adjust cage 23999 ea 910 452013F | STEEL BOLT ONSHOCK MOUNTS1 910 82207 Angled shock mount $3499 ea B | LIGHTWEIGHT2 910 82206 Straight shock mount 3499 ea STEEL BEARING3 910 82208 Shock mount swivel 3799 ea •BISRtaDndCardAmGodEeSl comes4 910 82215 Replacement bearing 3999 ea $32999 ea with angled shock drop 32499 ea with a no bind swivelG | LIGHTWEIGHT DOUBLE • Bottom hole is 41⁄2” down from centerline of housing•••SHLRLaiogEtdheAstewtndRedeigrsBehigdtEnurecdAeporlRuabcbuIelesNahbsihGlneeghasBralvIeRs DCAGE and top is 41⁄2” up but features multiple holes to change the rate at which the birdcage indexes••• and spacers included • Also allows for various shock and spring mounting Angular contact bearings locations for ultimate tunability LH side or RH side Comes with 2 standard shock mounts, 1 910 82201 Left rear birdcage $32999 ea and 2 retainer rings 1 910 82202 Right rear birdcage 28999 ea 2 910 82206 Straight shock mount 4, 5, or 6” drop 3499 ea910 80052910 80061 LH side RH sideH | DOUBLE SHEAR•STPeErfEecLt bBeaIrRingDaCligAnmGeEnt, zero plate deflection, C | STEEL DUAL ROLLER BEARING BRAKE standard shock drops, and stainless steel bolts •FLThOisAduTalEbeRarWing/CoaLteAr dMesiPgnSts that are counter sunk for clearance• 1/2” bolts with shoulder and GM metric calipers and 3” axle tubes lock nut, no need for washers Holes are 5-1/2” and 6-1/2” up from center• Step bushing allow for dust boots •• Right and Left rear double shear brake oaters with clamp rings to protect rod ends from dirt910 80210 LH side $42499 ea 910 20016 RH brake oater with clamps $18999 ea910 80200 RH side 42499 ea 910 20017 LH brake oater with clamps 18999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 115
REAR SUSPENSION GM MetricA | REAR CONTROL ARMS••FOCMheRoaosMusereeImiDtehneStrsI‘7Za8reE-’8c8GenGtM-ebrody or ‘73-’77 A-body to center of the bushings• Arms shipped without bushings installed• Can be used with our polyurethane or stock bushings such as Moog K-6178• No provision for factory style sway bar on lower arms‘73 ’77 GM A BODY UPPERS 111⁄4” LOWERS 223⁄8”916 34053 $20499 set916 34051 Arms with polyurethane bushings 11999 set 2999 ea916 34054 Arms without bushings 3499 ea 9499 set916 34050 ‘73-’77 GM upper arm $18999 set916 34045 ‘73-’77 GM lower arm 11999 set 2999 ea Polyurethane bushings only 3499 ea‘78 ’88 GM G BODY UPPERS 111⁄4” LOWERS 191⁄2” 9499 set916 34057916 34055 Arms with polyurethane bushings916 34054 Arms without bushings916 34052 ‘78-’88 GM upper arm916 34045 ‘78-’88 GM lower arm Polyurethane bushings only D | REAR CONTROL ARM BUSHING WITH SPHERICAL •BEStAeeRl reIaNr cGontrol arm bushings have spherical bearings in them just like a rod end •••• Includes rubber insert seals for that oem look Frees up suspension movements and eliminates binding Fits ‘73-’88 GM midsize rear control arms Sold individuallyB | STAMPED GM METRIC UPPER 916 34048 Rear control arm bushing $2499 ea $3399 ea••ANSImtaDpmropLveedOtshWteeehlEa, nCRd-clihRnagnEonAfeylRoarumCr ‘s7Oa8r-eN’8s8tTrGoRMngOMaenLtdriAcstruReradMrysuspension by replacing twisted or worn out rear control arms E | SOFT REAR 3999 ea• Sold each ••COSFooNrftGmTMaRtmeOreitarLlicalAcloawrRssMfor BUSHINGS1 916 34058 Upper - 11.25 center to center $5499 ea2 916 34059 Lower - 19.63 center to center 6999 ea • more suspension travel and bite IMCA approved for Southern Sport Mods only OFFSET 916 34046 Speedway 910 34046 Seals-it•C | OFFSET REAR CONTROL ARM BUSHINGS Center hole offset 1⁄4” to allow you to compensate for wheel F | URETHANE REAR base or pinion angle issues•• Fits 65-88 GM midsize rear control arms •TRFitAs ‘I6L5-I’8N8 GCheAveRlleM, MoBnUte CSaHrloI,NCuGtlaSss, Regal, and Skylark Sold in pairs (One pair equals two bushings)916 34047 O set rear control arm bushings $3999 pr 916 34045 Rear trailing arm bushings $9499 set116 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
GM Metric REAR SUSPENSIOND | GM A | 9” FORD/METRICTRAILING ••CHLUopAwpeeSrrsmSwoIiSlul nwBtosraRkrewAtirtCihmKu-ptoEt-ofTit3S” to 31⁄2”•ARDeMsignBedRfAor C3”KO.ED.TaxSle106 20285 Not IMCA approved $7299 pr • tube diameter Welding and fabrication skills required 1 910 95347 IMCA hobby stock approved $9799 ea 2 910 95346 Includes caliper brackets 9799 ea IMCA stock car approved 3 910 95348 Has multiple holes 12999 ea IMCA stock car approvedE | LOWER SPRING PERCH• Welds to 3” axle tube for mounting conventional coil springs• Fits spring 3 ⁄ ” O.D. to 5” O.D.917 20243 Speedway $1299 ea106 20156 AFCO 2999 ea B | 5.5” X 12” STREET STOCK ••REDBleAascikRgnfienSdisPhfoRtrouIbsNee wsGtiotSchkinatpeprmeaeridnigate rear suspension 106 514 RATE 150, 175, 200, 225, 250 & 275 lb. $5999 ea••••F | ‘78 AND UP GM METRIC CALIPER Shielded bottom inlet IMCA approved No core charge Saves 3.5 lbs.*Does not include slider bolt, pads or bushing910 31045 SIDE New - 7⁄16”-20 inlet, caliper only $4299 eaG | GM METRIC C | 10 SERIES STEEL BODY‘78 AND UP ••STSVhaRlovcEekdEosfTpcehScoifTiicceaOlfloyCrfosKtrrecMiertclsOetotrcUakcNcklarTascseiSnsgH, aOsseCmKbleSd919 1562 Speedway 156 $1599 pr • in a “stock” configuration body106 12511154 Afco – C1 8999 set Split-valve options provide additional tuning capabilities over standard106 12512154 Afco - C2106 6653002 Afco 32 11999 set 106 SPECIFY $7999 ea106 6653012 Afco 33 13499 set106 6653022 Afco 34 13499 set FRONT REAR835 9422 Wilwood BP-20 13499 set '55 '86 GM MID AND FULL SIZE, '55 '86 GM MID AND FULL SIZE,835 6103 Wilwood Poly E '70 '81 CAMARO/FIREBIRD, '63 '86 MALIBU, CHEVELLE,835 8936 Wilwood BP-10 6899 set '65 '86 FORD FULL SIZE, MONTE CARLO, CUTLASS AND REGAL,919 D154 Hawk HPS 9199 set MONTEGO AND COUGAR '68 '79 NOVA919 D154P Hawk Plus 5299 set 1 COMP REB 2 COMP REB919 D154M Hawk Black 4699 set 1020 7 7 1030 5919 119A Hawk HPS DTC-15 8699 set 1021 6 6 1031 6 5919 119W Hawk HPS DTC-30 7299 set 1022 7 4 8599 set 1035 3 6 9499 set 5 COMP. LENGTH: 9.375\" EXT. LENGTH: 13.375\" COMP. LENGTH: 13.00\" EXT. LENGTH: 21.00\"ORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 117
REAR SUSPENSION Leaf Springs HEAT TREATED, SHOT PEENED FOR EXTRA LIFEA | LEAF SPRINGS for extra life• Heat treated, shot peenedPART # RATE TRUE ARCH SPRING TYPE PRICE PART # FRONT REAR APPROX. TRUE ROUGH PRICESPEEDWAY CAMARO, NOVA, FIREBIRD MULTI LEAF SPRINGS $14999 ea BOLT EYE LBS/INCH ARCH ARCH917 21340 175 6.5” SPEEDWAY CHRYSLER TYPE MONO LEAF SPRINGS $4499 ea917 21342 200 6.5” 4 leaf light 14999 ea 917 20242 5” 4499 ea 14999 ea 5⁄8” 1” 65 4.25 7”917 21344 225 6.5” 4 leaf medium $19999 ea 917 20240 $6999 ea 19999 ea 5⁄8” 1” 65 5.75 5” 6999 ea 4 leaf heavy 19999 ea LANDRUM CHRYSLER TYPE MONO LEAF SPRINGS 5” 6999 eaAFCO CAMARO, NOVA, FIREBIRD MULTI LEAF SPRINGS 19999 ea 5” 6999 ea106 20228LW 153 6.375” $12599 ea 917 20250ML 5⁄8” 1” 20 4.25 5” PRICE106 20228 176 6.375” 2300-2600# 12599 ea 917 20244ML 5⁄8” 1” 12599 ea 35 4.25 TRUE $8499 ea106 20228HD 205 6.375” 2500-3000# 12599 ea 917 20242ML 5⁄8” 1” ARCH 8499 ea $12599 ea 55 4.25106 20228XHD 238 6.375” 3000-3400# 12599 ea 917 20240ML 5⁄8” 1” 6.5” $19999 ea 12599 ea 65 4.25 6.5” 19999 ea 3200-3600# 19999 eaLANDRUM CAMARO, NOVA, FIREBIRD MULTI LEAF SPRINGS 5” 19999 ea917 21340SP 175 6.5” PART # FRONT REAR APPROX. 5” 4 leaf light BOLT EYE LBS/INCH 5” $12599 ea917 21342SP 200 6.5” 5” 12599 ea917 21344SP 225 6.5” 4 leaf medium SPEEDWAY CHRYSLER TYPE MULTI LEAF SPRINGS 12599 ea 6.5” 12599 ea917 21348SP 250 6.5” 4 leaf heavy 917 20230 5⁄8” 1” 175 6.5” 6.5” 5 leaf heavy 917 20231 5⁄8” 1” 200 6.5”LANDRUM PINTO MULTI LEAF MINI STOCK LEAF SPRINGS917 42450SP 100 • Stock front bushing AFCO CHRYSLER TYPE MULTI LEAF SPRINGS917 42452SP 125 • Less arch for lower roll center 106 20231 5⁄8” 1” 142 106 20231MHD 5⁄8”917 42454SP 150 • Teflon spring inserts to reduce inner leaf friction 106 20231HD 1” 152 5⁄8” 1” 166 106 20231XHD 5⁄8” 1” 194 LANDRUM CHRYSLER TYPE MULTI LEAF SPRINGS 917 20220SP 917 20230SP 5⁄8” 1” 150 917 20231SP 5⁄8” 1” 175 917 20240SP 5⁄8” 1” 200B | REINFORCED 5⁄8” 1” 225FRONT SEGMENT•••LERNPreAeodwvuFisdceeeScswoPinmhRdepearIrloyNbvlaeeGsdaeffSvdoaerrwsiaiagtrindonbsitdeuring braking and acceleration ‘70 ’75 CAMAROPART # RATE TRUE ARCH PRICE CHRYSLER ‘76 ’81CAMARO MULTI LEAF $21999 ea CAMARO106 20228RF 6.375” D | LEAF SPRING SHACKLES106 20228HDRF 176 6.375” 21999 ea $2999 ea $21999 ea 916 45570 ‘70-’75 Camaro – Speedway Motors 3899 ea 205 6.625” 106 202361 ‘70-’75 Camaro – AFCO 2499 eaCHRYSLER TYPE MULTI LEAF SPRING 916 45569 Chrysler type – Speedway Motors 2499 ea106 20231HDRF 916 45576 ‘76-’81 Camaro – Speedway Motors 3899 ea 166 106 202362 ‘76-’81 Camaro – AFCO 2” E | SHACKLE PLATES • 5⁄16” 6061-T6 aluminum, or steel 91⁄4” $1499 prC | COMPOSITE LEAF SPRINGS 910 43301 Speedway Motors aluminum 1699 ea 106 20235 AFCO aluminum 1899 ea••• Lighter than steel, respond faster, are more consistent 106 20281 AFCO steel Last up to five times longer than steel springs Springs are available for Chevy or Chrysler F | NYLON FRONT G | LEAF SPRING LEAF SPRING •PIFVitsOfroTntBeyUe SHINGPART # FRONT BOLT REAR BOLT ARCH RATE PRICECHRYSLER LEAF SPRING $33999 ea444 10203 41⁄2” 175 •BUFitSs fHronItNeyGe on on Chrysler444 10231 0.625 1⁄2” 41⁄2” 200 33999 ea type leaf $33999 ea AFCO Chrysler 0.625 1⁄2” 41⁄2” 175 type leaf springs - onlyCHEVY LEAF SPRINGS 41⁄2” 200 33999 ea springs only 11⁄2”444 11340 41⁄2” 225 33999 ea •5⁄8” ts AFCO leaf springs444 11342 0.562 1⁄2” Eliminates binding444 11344 0.562 1⁄2” 106 20229N $3999ea 106 20229P $7999 ea 0.562 1⁄2”118 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Leaf Springs REAR SUSPENSIONE | ALUMINUM LOWERING BLOCKS 5⁄8\"•• 21⁄2” wide x 5” long ⁄ ” pin916 43 1⁄4” $599 ea 916 43 21⁄2” $1299 ea916 43 1⁄2” 899 ea 916 43 3” 1399 ea916 43 3⁄4” 999 ea 916 43 31⁄2” 1499 ea916 43 1” 999 ea 916 43 4” 1699 ea916 43 11⁄2”916 43 2” 1099 ea 1199 eaF | ANGLE SHIMS A | ADJUSTABLE•• Available in 2° and 4° ALUMINUM 21⁄2” wide ••LO2Sp1⁄W2e”cwifEyidhReeiIgNht:G11⁄2B”, L2”O, 21C⁄2”KorS3”916 433 ANGLE Angle shims $1999 pr910 89409 Angle nder tool 999 ea 910 43320 SIZE Speedway Motors $2999 ea 106 20270 11⁄2” – AFCO 4999 eaG | LOWER SHOCK LH RH•••MASSOtpceceeUeclpifpNytlsaL2TtHe½IoN”rsRpGHrinPg LATE $1999 ea917 20249 SIDE Speedway Motors (shown) 2999 ea SOLD EACH106 20249 AFCO – LH 2999 ea106 20250 AFCO – RH SOLD IN PAIRS B | SPRING PADSH | UNIVERSAL LEAF 545 85090 Weld-on – Speedway Motors - sold in pairs $1499 pr 106 20232 Weld-on – AFCO 1699 ea 910 43303 Clamp-on – Speedway Motors 2499 ea•••SPFFUie-RtbastoIfurlNotrenhsGtoaalen½Psd”L⁄rmeA”aoraTuupnpaEtrittnog3b”osspsreinsg 10” 8”917 20248 Speedway Motors $2999 ea 3” 3” $599 ea C | U BOLTS 999 ea 599 ea •• Zinc plated, heat-treated U-bolt with nuts 799 ea 1⁄2” diameterJ | LEAF SPRING••BUOUrnSeethHpaanIirNedboGuessShoinngesspring end 910 43800 3” x 10” – Speedway Motors 106 202389 3” x 91⁄2” – AFCO910 43250 910 43801 3” x 8” – Speedway Motors910 43255 106 20238 3” x 8” – AFCO For rear eye and rear frame mount on Camaro, $1499 pr STANDARD Firebird, and Nova springs Chrysler type for rear eye - not for Mopar springs 999 pr D | LEAF SPRING •SLBoIDlts EonRinSplace HEAVY DUTYK | FRONT LEAF SPRING MOUNT 3” 6”• Weld-on front leaf spring mount • of shackle for Chrysler springs Standard model uses nylon blocks• 33⁄16” inside width with 5⁄8” bolt hole diameter (does not include bush) •• Heavy duty version with roller bearings910 43308 Speedway Motors $1199 ea For Chrysler or Camaro style springs106 50200 AFCO 2499 ea CHRYSLERL | ADJUSTABLE REAR LEAF 910 43306 Heavy duty model – Speedway $3999 ea•••SPSAThwdRajoucIskpNtloemsG8iet”niolStonbnHbogoltA3lt1”71Cw⁄⁄186”iK”ddheiLaoinmlEesei1Sd⁄t2e”erC, L71⁄4” long 106 20236S Heavy duty model – AFCO 9999 ea 910 43302 Standard model – Speedway 2999 ea916 45545 Spring shackles $4999 ea 910 43304 Replacement blocks for standard model 499 pr CAMARO 910 43305 Heavy duty model – Speedway $5499 ea 106 200036 Heavy duty model – AFCO 9999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 119
REAR SUSPENSION Rod Ends LOW CARBON STEEL 2 PIECE PRICE SHANK/HOLE MALE LH MALE RH FEMALE LH FEMALE RH $399 ea A | STANDARD ROD ENDS 3⁄16” 175 0300 175 0100 175 0400 175 0200GOOD 299 ea • General-purpose, two-piece, 1⁄4” 175 0301 175 0101 175 0401 175 0201 399 ea standard-duty rod end 399 ea • Carbon steel body, hardened ball, 5⁄16” 175 0302 175 0102 175 0402 175 0202 499 ea 3⁄8” 175 0303 175 0103 175 0403 175 0203 599 ea metal-to-metal contact 7⁄16” 175 0304 175 0104 175 0404 175 0204 599 ea • Application: Clutch, brake, steering 1⁄2” 175 0305 175 0105 175 0405 175 0205 1799 ea linkages, suspension components on 999 ea moderate horsepower applications 5⁄8” 175 0306 175 0106 175 0406 175 0206 999 ea 11⁄16” - 5⁄8” 175 0328 175 0128 3⁄4” 175 0307 175 0107 175 0407 175 0207 3⁄4” - .757” 175 0757 STEERING HEIM •B | PRECISION ROD ENDS Close-tolerance, three-piece, STEEL WITH TEFLON® KEVLAR® RACE medium-duty rod end SHANK/HOLE MALE LH MALE RHBETTER • Carbon steel body, 5210 3⁄16” 175 0310 175 0110 FEMALE LH FEMALE RH PRICE precision-ground ball, Kevlar race 1⁄4” 175 0311 175 0111 175 0410 175 0210 $599 ea • Self lubricating Teflon liner to seal out 5⁄16” 175 0312 175 0112 175 0411 175 0211 499 ea dirt and debris 3⁄8” 175 0313 175 0113 175 0412 175 0212 599 ea • Quieter, smoother, and more durable than 7⁄16” 175 0314 175 0114 175 0413 175 0213 599 ea two-piece rod ends 1⁄2” 175 0315 175 0115 175 0414 175 0214 899 ea • Tight tolerance reduces “slop” in steering 5⁄8” 175 0316 175 0116 175 0415 175 0215 899 ea and suspension 3⁄4” 175 0317 175 0117 175 0416 175 0216 1299 ea • Application: Clutch, brake, steering and SHANK HOLE MALE LH 175 0417 175 0217 1699 ea suspension components 5⁄8” 1⁄2” 175 0326 PRICE 3⁄4” 5⁄8” 175 0327 MALE RH C | PRO 1 ROD ENDS 175 0126 $1399 ea 175 0127 1799 ea • General-purpose, two-piece,LIGHTEST SUPER STRONG BEST heavy-duty rod end HEAT TREATED CHROMOLY 2 PIECE BLACK OXIDE COATED Chromoly steel body, black oxide coated SHANK HOLE MALE LH MALE RH PRICE • 175 0705 175 0505 $1199 ea to resist corrosion 1⁄2” 1⁄2” 175 0726 175 0526 ••• Heat treated, precision-ground ball 5⁄8” 1⁄2” 1399 ea Metal-to-metal contact 5⁄8” 5⁄8” 175 0706 175 0506 1299 ea Application: Steering and suspension 3⁄4” 5⁄8” 175 0727 175 0527 1699 ea 175 0707 175 0507 1599 ea components on moderate to high 3⁄4” 3⁄4” horsepower applications WITH TEFLON® KEVLAR® RACE D | CHROMOLY ROD ENDS SHANK HOLE MALE LH MALE RH PRICE 5⁄8” 1⁄2” 910 02326 910 02126 $2099 ea • Close-tolerance, three-piece, 910 02316 910 02116 extreme-duty rod end 5⁄8” 5⁄8” 910 02346 910 02146 1999 ea •• Heat-treated, 4130 chromoly steel body 3⁄4” 5⁄8” 910 02336 910 02136 2599 ea Hard-chrome, heat-treated ball to support 910 02356 910 02156 2599 ea 3⁄4” 3⁄4” 910 02366 910 02166 4799 ea 1” 1” 4799 ea heavy shock loads • Injection molded Kevlar/Teflon liner to seal 11⁄4” 1” out dirt and debris. Reduces slop and WITH TEFLON®/KEVLAR® SELF LUBRICATING & SELF SEALING RACE eliminates binding to provide smooth and SHANK/HOLE MALE LH MALE RH PRICE FEMALE LH FEMALE RH PRICE precise movement of steering & suspension 3⁄16” 117 0802 117 0800 $799 ea 117 0702 117 0700 $799 ea • Application: Steering and suspension for 1⁄4” 117 0804L 117 0804 799 ea 117 0712 117 0710 799 ea racing and high horsepower applications 5⁄16” 117 0805L 117 0805 1099 ea 117 0722 117 0720 1099 ea 3⁄8” 117 0806L 117 0806 1199 ea 117 0732 117 0730 1199 ea E | ALUMINUM ROD ENDS • Close-tolerance, three-piece, SHANK HOLE MALE LH MALE RH PRICE medium-duty rod end 1⁄2” 1⁄2” 117 0808L 117 0808 $999 ea • Hard anodized 7075-T6 7⁄16” 3⁄8” 117 08009 117 0809 1099 ea aerospace-quality aluminum body 5⁄8” 1⁄2” 117 0810L 117 0810 • Heat-treated, 5210 precision-ground 117 1010L 117 1010 999 ea ball, Kevlar race 5⁄8” 5⁄8” 117 1012L 117 1012 1499 ea • Self-lubricating Teflon liner to seal out 3⁄4” 5⁄8” 117 1212L 117 1212 1699 ea dirt and debris 1599 ea • All of the strength and features of the 3⁄4” 3⁄4” • precision rod ends, at half the weight G | ADVENTURE SERIES Application: Designed for motorsports •••ROFFBuoeCrnagrciKetnidognaEennaNdtd3hwD6e%iatShtmtrreeispaaltlaeigcdenhmmoeeunnstitnbgushing liner applications where weight is criticalF | SEALS IT 910 01500 5⁄16”, set/6 $999 set 721 1018 SPECIFY Adventure series rock ends - 11⁄4”-12 thread $3999 eaHEIM SEALS 910 01501 3⁄8”, set/6 999 set 721 1016 SPECIFY Adventure series rock ends - 1”-14 thread 3999 ea 910 01502 7⁄16”, set/6 999 set 910 01503 1⁄2”, set/6 999 set 910 01504 5⁄8”, set/6 910 01505 3⁄4”, set/6 1199 set 1299 set120 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Rod Ends REAR SUSPENSIONH | ROD END A | WELD BUNGS•WTIhTesHe roSdTenUdsDmake it easy to build carb or shift linkage, tie rod 910 02965 3⁄4” RH $999 ea 1” O.D. assemblies or anything else you can think of 910 02966 3⁄4” LH 999 ea GO TO SPEEDWAYMOTORS.COM• Teflon lined and the RH thread stud has a hex built in for easy installation 910 02967 5⁄8” RH 999 ea 910 02968 5⁄8” LH 999 ea FOR A COMPLETE SELECTION STUD/THREAD MALE LH MALE RH FEMALE LH FEMALE RH PRICE 910 02969 11⁄16” RH 999 ea 3⁄16” 175 0320 175 0120 175 0420 175 0220 $699 ea 910 02970 11⁄16” LH 999 ea 1⁄4” 175 0321 175 0121 175 0421 175 0221 5⁄16” 175 0322 175 0122 175 0422 175 0222 699 ea B | STEEL JAM NUTS 3⁄8” 175 0323 175 0123 175 0423 175 0223 699 ea 7⁄16” 175 0324 175 0124 175 0424 175 0224 799 ea • Specify RH/LH thread 1⁄2” 175 0325 175 0125 175 0425 175 0225 899 ea 5⁄8” 175 0329 175 0129 175 0429 175 0229 1099 ea 175 6041 SPECIFY 1⁄4” $199 6 pk 1299 ea 175 6042 SPECIFY 5⁄16” 199 6 pk 175 6043 SPECIFY 3⁄8” 199 6 pkJ | ALUMINUM $499 6 pk 315 9600 1⁄2” - 20 RH 199 ea 175 6044 SPECIFY 7⁄16” 199 6 pkJAM NUTS 499 6 pk 315 9601 1⁄2” - 20 LH 199 ea 175 6045 SPECIFY 1⁄2” 299 6 pk 499 6 pk 315 9603 5⁄8” -18 RH 199 ea 175 6046 SPECIFY 5⁄8” 399 6 pk315 9592 10-32 RH 499 6 pk 315 9604 5⁄8” -18 LH 199 ea 175 6047 SPECIFY 3⁄4” 399 6 pk315 9593 10-32 LH 499 6 pk 315 9605 3⁄4” -16 RH 199 ea 175 6050 SPECIFY 1” 499 ea315 9594 1⁄4” - 28 RH 499 6 pk 315 9606 3⁄4” -16 LH 199 ea 175 6052 SPECIFY 11⁄4” 499 ea315 9595 1⁄4” - 28 LH 499 6 pk315 9596 5⁄16” - 24 RH 499 6 pk C | STEEL 3/4”O.D.315 9597 5⁄16” - 24 LH 5/8” JAM NUTS315 9598 3⁄8” - 24 RH315 9599 3⁄8” - 24 LH 175 6048 RH $399 6 pk 175 6048 LH 399 6 pk D | STEEL CONTROL ARM SPACERS LH 910 06120 5⁄8” x 1⁄4” $199 ea 910 06122 199 eaK | HIGH 910 06124 5⁄8” x 1⁄2” 199 ea 910 06126MISALIGNMENT 910 06127 5⁄8” x 3⁄4“ 299 ea 910 06990•••ROUBThlpaDectskoeEo6hx4Nei°daoetD-ftcmroSeaiasttaeeldidghnemimenstare RH 910 07000 5⁄8” x 1” 299 ea misalignment chromoly steel, high 5⁄8” x 13⁄8” 5⁄8 x 1⁄2” tapered 399 ea 3⁄4“ x 1⁄2” tapered 399 ea .250”175 0805 1⁄2” LH male - NEW $1299 ea 1” HOLE175 0605 1⁄2” RH male - NEW 1299 ea175 0806 5⁄8” LH male 1499 ea E | CONE SPACERS175 0606 5⁄8” RH male 1499 ea175 0807 3⁄4” LH male 1899 ea ••• 1” O.D175 0607 3⁄4” RH male 1899 ea Aluminum or steel175 0827 3⁄4” LH male - 5⁄8” hole - NEW 1899 ea Eight per pack175 0627 3⁄4” RH male - 5⁄8” hole - NEW 1899 eaL | FK CMX ROD ENDS 546 4108 1⁄2” hole aluminum $799 pk 546 4107 1⁄2” hole steel 799 pk•••• General-purpose, two-piece, heavy-duty rod end 940 04016 1⁄2” 16 piece assortment aluminum Chromoly steel body, black oxide coated to resist corrosion 546 4109 5⁄8” hole aluminum 2199 pk Heat treated, precision-ground ball 546 4110 5⁄8” hole steel 799 pk PTFE Liner 799 pk F | ROD END REDUCER RH • Choose aluminum or steel $999 ea 1199 ea150 3008 SPECIFY 1⁄2\" rod end $1299 ea 910 04110 3⁄4” Bore, 5⁄8” bolt, aluminum $299 ea 1499 ea150 3010 SPECIFY 5⁄8\" rod end 1499 ea 910 04100 5⁄8” Bore, 1⁄2” bolt, aluminum 299 ea 2199 ea150 3012 SPECIFY 3⁄4\" rod end 2099 ea 910 04111 5⁄8” Bore, 1⁄2” bolt, steel 299 ea 3499 ea150 31008 SPECIFY 5⁄8\" x 1⁄2\" rod end 1499 ea 2799 ea150 31208 SPECIFY 3⁄4\" x 1⁄2\" rod end 1899 ea G | INDUSTRIAL TAPS150 31210 SPECIFY 3⁄4\" x 5⁄8\" rod end 2099 ea $999 ea •• Four-flutesM | TUBE ADAPTERS 1399 ea Specify LH or RH thread 1599 ea• Weld-in tube adapters are CNC 912 81032 SIZE LH machined from 1020 steel 912 81033 3⁄8” - 24 $1899 ea• Available with RH or LH threads 912 81034 7⁄16” - 20 912 81036 1⁄2” - 20 N/A910 02962 SPECIFY 1”for 11⁄2” O.D., .125”- wall tubing 912 81037 5⁄8” - 18 2399 ea910 02963 SPECIFY 11⁄4” for 13⁄4” O.D., .125”- wall tubing 912 81038 11⁄16” - 18 3999 ea910 02964 SPECIFY 11⁄4” for 2”O.D., .250”- wall tubing 3⁄4” - 16 3499 ea 4499 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 121
REAR SUSPENSION Steel Swedged Tubes ••••F | 5⁄8” AND 3⁄4”SWEDGED STEEL TUBESA | 5⁄8” STEEL SWEDGED SLEEVES Consistent wall thickness allows better thread engagement Black zinc-plated for increased part life••• 7⁄8” O.D. tube, .065” wall .095” DOM material 5⁄8” RH and LH threads Deep knurl for easy length adjustments Available in 1” increments from 4”-24” 106 5804 4” - 5⁄8” steel tube $1399 ea910 34258 LENGTH 4” - 10” $999 ea 106 5805 5” - 5⁄8” steel tube 1399 ea910 34258 LENGTH 11” - 14” 1499 ea 106 5806 6” - 5⁄8” steel tube 1399 ea910 34258 LENGTH 15” - 24” 1499 ea 106 5807 7” - 5⁄8” steel tube 1399 ea $999 ea 106 5808 8” - 5⁄8” steel tube 1399 ea•••B | 3⁄4” STEEL SWEDGED SLEEVES 1299 ea 106 5809 9” - 5⁄8” steel tube 1399 ea 1499 ea 106 5810 10” - 5⁄8” steel tube 1399 ea 1” O.D. tube, .095” wall to 30”, 37” 1699 ea 106 5811 11” - 5⁄8” steel tube 1399 ea 3⁄4” RH and LH threads $1899 ea 106 5812 12” - 5⁄8” steel tube 1599 ea Available in 1” increments from 9” 2199 ea 106 5813 13” - 5⁄8” steel tube 1599 ea 2499 ea 106 5814 14” - 5⁄8” steel tube 1599 ea910 34234 LENGTH 9” - 12” 106 5815 15” - 5⁄8” steel tube 1599 ea910 34234 LENGTH 13” - 20” 106 5816 16” - 5⁄8” steel tube 1599 ea910 34234 LENGTH 21” - 30” 106 5817 17” - 5⁄8” steel tube 1599 ea910 34234 LENGTH 37” 106 3409 1599 ea 106 3410 9” - 3⁄4” steel tube 1599 eaC | 5⁄8” CHROMOLY 106 3411 10” - 3⁄4” steel tube 1599 ea•••SW415⁄8”1”3O-E10.8DDtu.RtGbHuibnaEgen,Dd.0L6HT5”tUhwrBeaallEdsS 106 3412 11” - 3⁄4” steel tube 1599 ea 106 3413 12” - 3⁄4” steel tube 1599 ea910 34558 LENGTH 4” - 9” 106 3414 13” - 3⁄4” steel tube 1599 ea910 34558 LENGTH 10”-15” 106 3415 14” - 3⁄4” steel tube 1599 ea910 34558 LENGTH 16”-24” 106 3416 15” - 3⁄4” steel tube 1599 ea 106 3417 16” - 3⁄4” steel tube 1899 ea 106 3418 17” - 3⁄4” steel tube 1899 ea 106 3419 18” - 3⁄4” steel tube 1899 ea 106 3420 19” - 3⁄4” steel tube 1899 ea 106 3421 20” - 3⁄4” steel tube 1899 ea 106 3422 21” - 3⁄4” steel tube 1899 ea 106 3423 22” - 3⁄4” steel tube 1899 ea 106 3424 23” - 3⁄4” steel tube 1899 ea 106 3425 24” - 3⁄4” steel tube 1899 ea 106 3426 25” - 3⁄4” steel tube 1899 ea 106 3427 26” - 3⁄4” steel tube 1899 ea 27” - 3⁄4” steel tube 15º BENDD | 5⁄8” CHROMOLY G | 5⁄8” BENT CHROMOLYTIE ROD AND •••SW145⁄8”1”3O-E10.8DDtu.RtGbHuibnaEgen,Dd.0L6HT5”tUhwrBeaallEdsS•••D5P4R⁄85l”aA”-i,1n48G,6pR”o,HLw4Ia7dNn”ed4rK8Lc”Ho, a4tt9he”rd,eoasridlv5se0r” or black $3599 ea 4299 ea 910 34559 LENGTH 10” $2699 ea910 353 LENGTH PLN Plain 3599 ea 910 34559 LENGTH 11” and 12” 2999 ea910 353 LENGTH CHR Powder coated 910 34559 LENGTH 13” and 14” 3199 ea910 353 LENGTH BLK Black H | 3⁄4” CHROMOLY •••SW413⁄411”⁄83-E”10O6Dt.uRDGbH. itnauEgnbDde,L.H0T5tU8h”rBewaaEdllsSE | 1⁄2” STEEL SWEDGED SLEEVES••• 7⁄8” O.D. tube, .065” wall 910 34534 LENGTH 9” - 18” $2599 ea 1⁄2” RH and LH threads 910 34534 LENGTH 19”-27” 2799 ea Available in 1” increments from 8”-20” 910 34534 LENGTH 28”-37 3099 ea910 34212 LENGTH 8” - 14” $1199 ea910 34212 LENGTH 15” - 20” & 24” 1499 ea122 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Aluminum Swedged Tubes REAR SUSPENSION 1,000,000InStock!F | 3⁄16”ALUMINUM SWEDGED•••THA3M⁄1v6aR”adi(l1eOa0bo-lTf3e25iT⁄1n)6”RL3xH”E-.20a04nL”9dl”IeLtNnHugbtKthihnrsgAeiandG1⁄2”Eincrements A | 5⁄8” ALUMINUM SWEDGED940 55301 LENGTH Tube $899 ea •••STA51⁄8”vE”Oa-1Ei.l8DaRb.RlIeHNiannGtdh,eLHPfotlAlhorwNeaindHgs,AlmenRagdtDehsfr:Ao1m3N1⁄62”D0, 6116R-”T,A617aD”l,u1mI7Ui1n⁄2Su”,m1R8”O, 18D1⁄2S”, 19”, 21”, 211⁄2”,940 553011 LENGTH Black 999 ea117 0800 3⁄16” (10-32) RH Male - aluminum 799 ea 22, 221⁄2”, 22”, 221⁄2”, 23”, 231⁄2”, 24”, 27”, 28”, 29”, 291⁄2”, 30”, 31”117 0802 3⁄16” (10-32) LH Male - aluminum 799 ea 910 354 LENGTH 131⁄2” - 19” $1099 ea 910 354 LENGTH 21” - 24” 1199 ea 910 354 LENGTH 27” - 31” 1299 eaG | 7⁄16” ALUMINUM SWEDGED B | 5⁄8” BLACKSTEERING, PANHARD &••RA7A⁄1v6D”a-i2laI0bURleHSinanRthdeOLfHoDltlhoSrweiandgs,lemnagdthesf:r9o”m, 931⁄4⁄2””,x1.102”,01”2r”o,u1n2d1⁄2”6,061-T6 ALUMINUM 13”, 131⁄2”, 14”, 141⁄2”, 15”, 151⁄2”, 16”, 161⁄2”, 17”, 171⁄2”, 18”, ••••SW1S61t0”7e6”OEe1t.roDDian.3lgutG1u,m”pbEiaenn,Du5hm⁄8a”RrNdOFaRnDHd raSanddiuLsHrothdrseads 211⁄2”, 361⁄2”910 352 SPECIFY 9” - 17” $1099 ea910 352 SPECIFY 171⁄2”- 211⁄2” 1299 ea910 352 SPECIFY 361⁄2” 1299 ea 910 3541 SPECIFY Swedge aluminum rod $1399 up•••H | 1⁄2” ALUMINUM SWEDGED TUBES C | 3⁄8” ALUMINUM ••SW3A⁄8v”Ea-2ilD4abRGlHeEiannDldenLSgHTthtEhsrEferoaRdmIsN:,5mG”atod, eP34oA”f 3iNn⁄4”1H⁄x2”.1Ain2cR0r”eDrmoue&nntdRs6aA0n6dD13-IT8U61⁄2S” RODS Compatible with 600 Racing Legends cars 1⁄2”-20 RH and LH threads Choose 61⁄2”, 11”, 12” or 231⁄2”910 350 LENGTH Aluminum swedged tubes $1199 ea 910 351 SPECIFY 5” - 17” $1099 ea 910 351 SPECIFY 171⁄2”- 28” 1299 ea 910 351 SPECIFY 281⁄2” - 34” 2199 ea 910 351 SPECIFY 381⁄2” 2299 eaJ | 5⁄8” ALUMINUM $899 ea•••TIA51E⁄81v”⁄8a-”R1ilO8aOb.RDlHe.DtfaurnobAdme,NL.1H134Dt.05h””rDewtoaadR5lls0A6”0G61 LINK 1199 ea D | 5⁄8” ALUMINUM 1399 ea aluminum ••••TI7AA6E⁄80lv”l6atOR1iul.a-bDOTbe6.lsteDauhilbnuaeSmv1,e”5Lin⁄w8in”uErcRmeErHnemVcahneEfdnlatSLstHsfratonhmdrea5ard”estobr2ig4h” t gold anodized $1399 ea910 355 LENGTH Plain $2199 ea 910 34158 LENGTH ALU 5” - 15” 1599 ea 910 34158 LENGTH ALU 16” - 21”K | COPPER GRAPHITE 910 34158 LENGTH ALU 22” - 24” 123•ANCoTppIerS-gEraIpZhiEte lubricates, resists galling helps prevent galvanic attack•• Works with softer materials 4 oz. can with brush324 025 $1599 ea E | 3⁄4” ALUMINUM •••TI6AAE0vll6atR1iula-bOTbe6lseDahilnuaSmv1e”LinwinuErcmeErne, mVc1h”eEOfnla.tSDsts.f,ra3on⁄4m”dRa8Hr”eatobnrd2ig7Lh”HtL | RADIUS ROD BUILDING TOOL threads gold anodized•• Fits 1⁄2”, 5⁄8”, and 3⁄4” rod ends 32” long 910 34134 LENGTH ALU 8” - 21”300 8005 $3499 ea 910 34134 LENGTH ALU 22” - 27”ORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com
REAR AXLE Complete RearendsA | GRAND NATIONAL•REReAclaRimEeNd, oDriginal housings with new 3” tubes and ends• Cleaned and jig-welded to ensure straightness• Includes NEW solid 31-spline axles, hubs, drive plates, 5⁄8” studs, bearings, seals, rotors and lug nuts• Choose 58” or 60” pinion-centered widths• 5 on 5” or 5 on 43⁄4” bolt patterns910 48323 SPECIFY $67999 eaB | GRAND NATIONAL•REAvAailRabEleNinD58”, 60” and 62” widths• Comes complete with 31-spline solid axles, hubs, bearings, seals, rotors and a new housing• 5 on 5” or 5 on 43⁄4” bolt patterns910 48423 SPECIFY $72499 eaC | GRAND NATIONALREAREND WITH GM•MAEvaTilaRblIeCinB58R”, 6A0”CanKdETS 62” widths• Comes complete with 31-spline solid axles, hubs, bearings, seals, rotors and a new housing with brackets•• 5 on 5” or 5 on 43⁄4” bolt patterns With standard lower mount or IMCA approved adjustable lower mounts910 48424 SPECIFY Standard lower brackets $84999 ea910 48425 SPECIFY Adjustable lower brackets 84999 eaD | 9” GRAND NATIONAL HOUSING offset E | STAMPED CENTER ••••••GRB3ACIGM\"revraAaCOnanniAt.ldDeNdaarb.nNe,pDl.ede1apw8tiprnioN8oisnv\"5ntaiew4Aaomd”lna,sTlp5nle6DoId”OuO, t5sMst8Ne\"te,uAl6bc0eeL\"n,s6tHe2r\"OhwoiUdutshiSnsgING••• Available in 60” or 62” widths 60” width has two 30” tubes with centered pinion 910 48349 Stamped center housing 62” width has 31 ½” tube and 30 ½” tube with ½” pinion655 4800 60” housing $44999 ea $39999 ea655 4803 62” housing 44999 ea124 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Housings REAR AXLEE | CUT TO FIT 28 SPLINE AXLES A | 9 INCH FORD CUT TO FIT•••• 4\" of splines cut up to 3\" off for custom fit AXLE WITH • Drilled for 5 on 5”, 5 on 41⁄2” and 5 on 43⁄4” 28\" axle will cover 25\" to 28\" applications ••••BE2P2H18AuA⁄22bo”0rORp3sfielf1IostNestbpt(celGieannreitneagxr loef wheel bolt patterns using 0.685” knurl dia 32\" axle will cover 29\" to 32\" applications ••••• AR375 Torino retainer Compatible with \"standard small bearing\" the axle flange) 33” long has 9.25” spline, 291⁄2” long has 10” spline housing and brakes with 2.525\" brake spacing offset measures 3.055” O.D. of the axle flange measures 5.93”• Drilled for 5 on 4½\" wheel bolt patterns Axles sold each, not as a pair & includes ½\" - 20 wheel studs Wheel studs not included•• Customer installed bearing and retainer included Axles sold each, not as pair 910 45127 28 SHORT $14999 ea 910 45127 31 SHORT 14999 ea1 910 98828 28 spline 28\" long axle $19999 ea 910 45127 28 LONG 14999 ea2 910 98832 28 spline 32\" long axle 19999 ea 910 45127 31 LONG 14999 ea 199 ea 910 05959 999 ea 910 95300 1⁄2” x 115⁄16” stud 199 ea 545 46190 1⁄2”-20 x 1.9” press-In wheel studs, .685 Knurl 1499 ea 910 95302 1⁄2” x 3” stud 199 ea 1⁄2”-20 x 3” press-In wheel studs, .685 Knurl 910 95304 7⁄16” x 111⁄16” stud•F | CUT-TO-FIT 31 SPLINE AXLES Axles have 4” of spline which will allow you to cut a maximum of 3” off the spline to obtain the correct length• 5 on 41⁄2” and 5 on 43⁄4” bolt patterns •••••B | 9” GRAND NATIONAL HOUSING and include both 7⁄16” and 1⁄2” studs• Designed to be used with the common Reclaimed original center housing big Ford brakes with 21⁄2” offset New 3” tubes and snouts• Includes a set 20 bearing and retainer Centered pinion that you will have to press on Includes breather fitting, mounting studs, and pipe plugs• Axle length is from the flange to Available in 58” or 60” widths• the end of the splines 910 48353 58 58” housing $35999 ea Axles sold each, not as a pair 910 48353 60 60” housing 35999 ea 37499 ea910 45120 26” long $19999 ea 37499 ea910 45122 29” long 19999 ea910 45124 32” long 19999 ea910 45126 35” long 19999 eaG | FORD AXLE ••••C | 9” GRAND NATIONAL HOUSING•BAExAle RbeIaNrinGg reRtaEinTerAforIsNmEallR Ford housing and big Tornio housing New housing with 3” axle tubes• Zinc plated steel Available in 58”, 60” or 62” widths 58 and 60” housings have centered pinion 62” housing has ½” offset pinion910 48378 Small Ford housing $899 ea 802 95345 60 1 60” housing910 48379 999 ea 802 95345 62 1 62” housing910 48376 Big Ford housing 999 ea Old style big Ford housingH | 9\" FORD D | 9” FORD HOUSING WITH METRIC BRACKETST BOLT•KIETverWyth/inNg UyouTnSeed to mount ••••• New centerless ground 3” tubes installed in reclaimed original Ford 9” housings Housing ends and metric brackets jig welded in place brake backing plates to your new Centered or 2” offset to the right pinion locations 9\" Ford housing Works great with Currie cut-to-fit axles to the right Axles sold separatelyInc••lud(8e⁄ )s\"Tfi-nbeotlthsreanadd matching lock nuts 910 48373 58” hub-to-hub width - centered yoke (use 26” and 301⁄2” axles) $45999 ea910 9075 T-bolt kit $2799 kit 910 48371 583⁄4” hub-to-hub width - 2” o set yoke (use two 29” axles) 45999 ea 910 48374 60” hub-to-hub width - centered yoke (use 27” and 311⁄2” axles) 45999 ea 910 48375 603⁄4” hub-to-hub width - 2” o set yoke (use two 30” axles) 45999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 125
REAR AXLE Grand National Hubs E | GRAND NATIONAL STEEL DRIVE •FLInAcluNdeGs dErivKeIflTange, dust cap with o-ring, and bolts • Dual pattern fits 5 on 5” or 5 on 4 ¾” hubs • 24 spline, 6 ½” O.D.A | COMPLETE 910 48380 Flange kit $5999 ea•••GNI2Inn4vcsleHupsdtlUimenseeBbnsetteKacerailInsdTtgr4siv1, er4a0fclaehnseg(aietntsrteaallteedd),shteuebl seal, 910 48389 599 ea 802 7479 Dust cap .99 ea 910 48385 2 O-ring for dust cap 199 pr 802 7478 Drive ange bolts 199 ea Flange inner o-ring $7499 ea•••• O-rings, cap and screws, lug nuts and studs F | GRAND NATIONAL 7499 ea Winters available in 5 on 5” only •STFlEanEgeLoDnlyRIVE FLANGE 999 ea Speedway available in 5 on 5” or 5 on 4 ¾” .99 ea Fits 2 ½” Grand National axle tube end .99 ea Hub retaining nut not included 199 ea 299 ea910 48400 Speedway Hub $18999 ea • (dust cap and bolts not included) 199 pr802 22555 Winters Hub 19999 ea Choose either 5 on 4 ¾”912 HN 12 R RH retaining nut 999 ea or 5 on 5” pattern $11499 ea912 HN 12 L LH retaining nut 1499 ea • 24 spline, 6 ½” O.D. 8999 ea 802 1681 5 on 4¾” 802 1680 5 on 5” 802 1726 802 7479 Dust cap 802 7938 O-ring for dust cap 802 7478 10-24 dust cap bolt 802 7494 5 on 5” inner o-ring 910 48385 2 5 on 4¾” inner o-ring Drive ange boltsB | GRAND NATIONAL G | GRAND NATIONAL•••HUCAInavcsBaltuilsdSatbeeslOee5lir/nNe8p5”LlsoatYcnued4ms¾ean”nodtrhr5aucobenss5in” sbtoalltlepdattern ALUMINUM910 48384 Speedway 5 on 4¾” $12999 ea ••DBIRnlacIlcVukdaEensoFfdlaLinzeAgdeN,adluuGmstEicnaupm910 48385 Speedway 5 on 5” 12999 ea with o-ring, and bolts802 2566C Winters 5 on 4¾” 15499 ea •••• 5 on 5” bolt pattern802 2255 Winters 5 on 5” 15499 ea 24 spline DIR - 6.95” O.D. $14999 ea HAT – 6.2” O.D.C | LIGHTWEIGHT STEEL 910 48357 DIR For direct mount hub•••GRLRIniogcAtlhoutrNdwaeedDsiag5ph/N8tte”brAsistlluoeTdltdIssOstaeenepNdlahrrAaautcbeeLslsyHinsUtalBled 910 48357 HAT For rotor/hat hub •••H | STEEL ROTOR ADAPTER Fits eight-bolt-on 7” center rotors Mittler Bros GN hubs910 48351 DIR Mittler Bros. hub 910 48354 GN $4499 ea•••D | ROTOR/HAT BOLTS J | GRAND NATIONAL Ultralight, 5⁄16” thread •••RE2A2.0dA50j”u%RSsh-t3aoH0br0tleU%TraBmcokBr5e×Ef5rAeReeRsaprIinNvGs. nSo PspAaceCr ER Set of eight Self-locking nuts835 2300233 5⁄16” UNC x 3⁄4” bolts only $399 set 910 10518 $5999 ea835 2500071 1⁄8” 5⁄16” UNF x 3⁄4” bolts with nuts for steel hats 399 set835 2500071 1⁄4” 5⁄16” UNF x 1” bolts with nuts for aluminum hats 399 set126 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Axles and Seals REAR AXLEE | GRAND 3” x 3.75” x .38” Hub seal $699 ea A | SOLID WIDE 5 AXLENATIONAL Winters hub seal 799 eaSEALS Winters hub seal retainer 299 ea •••• For use with 24 spline drive flanges 1.375” x 1.831” Snout seal 699 ea 28 or 31 spline912 S29866 1.375” x 1.875” Snout seal 699 ea 28 spline available in 28.5” to 33” lengths802 7201 Winters snout seal 999 ea 31 spline available in 25.5” to 38” lengths802 7644 GN snout/wide 5 axle seal 799 ea912 S13537 655 79031 LENGTH Solid 31 spline - Winters $12999 ea912 S13535 Bearing 655 79028 LENGTH Solid 28 spline - Winters 12999 ea802 7271 Race 910 50028 LENGTH Solid 28 spline - PEM 8999 ea912 13540 910 50031 LENGTH Solid 31 spline - PEM 9499 eaF | GRAND B | DOUBLENATIONAL SPLINED AXLEBEARING $2499 ea •••FOFLLeiogRnrhg2tt4Wwh-esspiIaglDvihnateiElaadxb5rleilvefeHofoprrUlea3xt1Bter-sesSpamnliender3a:1c2i-8ns1pg⁄2l”icn,o2en9sd”p,ito3io0on”ls,s301⁄2”, 31”, 1199 ea912 TL610549 32”, 321⁄2”, 33”, 34”, 35”, 36”, 361⁄2”, 38”912 TL610510 910 480 Gundrilled 31-spline 14499 eaG | LOW DRAG ANGULARCONTACT GRAND•••NALCGehrseTosaoItfsrOfieoctrsNitoCanriAan,tlleeeLssassBnshdteEelaeiAmtl,oilRterescdsIeNehranomGersrigecSpyboeawqlluebarelcsalramisnsogersse speed C | DOUBLE SPLINED GRAND •NADoTubIOle sNplAineLaAxleXwLitEh shoulder802 7301AC Low drag bearing $5499 ea for outer axle seal found in Grand National rear 31 SPLINE INNER912 7301AC Ceramic ball bearing 12499 ea •• Will not work with mod-lite or wide 5 rearends LARGER DIA. FOR 281⁄2” to 341⁄2” AXLE SEALH | UNIVERSAL AXLE 655 790 LENGTH $10499 eaPULLING TOOL910 82309 Gundrilled axle 3⁄4” x 16 thread $2499 eaJ | GRAND NATIONAL D | MAX TORQUE••AXAFiltuLsm1E⁄2i”nNdurmiUveTratWcheRt ENCH ABSORBING AXLES910 82302 Nut wrench While all axles twist upon acceleration, DRP axles are designed for maximum twist and thus maximum bite. $2499 ea LIGHTWEIGHT AXLES LW : Up to 750 HP! Proven success in asphalt modifieds, lateK | GRAND NATIONAL $999 ea models, dirt modifieds (IMCA/UMP/NE mods), dirt late modelsHUB RETAINING NUT 1499 ea XTRA LIGHTWEIGHT AXLES XLW : $199 ea Up to 550 HP! Maximum twist and weight savings. Great for912 HN 12 R RH thread nut crate and lower horsepower engines912 HN 12 L LH thread nut ULTRA LIGHTWEIGHT AXLES ULW : 500 HP and below. Ideal for small crate engines and/or small/L | GRAND hard tire vehicles or very low grip tracksNATIONAL HUBLOCK WASHER ••••BeLIMSnnoaecavsrfieeneitsat4sast:-iie6nrsepsstobrauitcnetdiloosnnoguf enurdnespr raucncegl,erroattaiotinnganwdedigehcteleration912 HW 12 Lock washer•M | INNER AXLE SEALS Change type housings 910 7103 SPECIFY 281⁄2\" - 36\" $29999 ea For 9” Ford Grand National and Quick1 919 0970 Universal 2.50” - 2.75” $2499 ea2 802 2841 Winters .200” wall - 2.605” - red 2899 ea2 802 3485 Winters .156” wall - 2.693” - purple 2899 ea3 919 0951 2.500 2.500” gold seal 5599 ea3 919 0951 2.562 2.562” blue seal 5599 ea3 919 0951 2.625 2.625” red seal 5599 ea3 919 0951 2.750 2.750” silver seal 5599 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 127
REAR AXLE Third MembersA |YRFCPFurioocoOlumhlfresmepRcsssohoiwDnooodinlictoahe9Eplxlos”ytctfioeoar3lcsnarsktRiaeinyovmgoDsakbi3alelan.e5Mbdd0lepftEooinrM7ioo.3vnB3al EtraRckAusSe oSnElyMB•••••LYCVNS2o8iaet-lrowirdonyrcipnph3iginr1noi-ciosmoapnnsoleibslnyeesetaacyplrrloiernesgmsmpsaipuiynamvcaefrorywrgiethd spool shims•••••3RD MEMBER WITH MINI SPOOL910 48340 RATIO $49999 up910 48341 RATIO 28-spline 49999 up3RD MEMBER WITH FULL SPOOL 31-spline $55999 up 55999 up910 48342 RATIO 28-spline 5999 ea910 48343 RATIO 31-spline 6999 ea910 48339802 92417 Yoke option for 31⁄4” U-joint with 1- 1⁄16” caps $79999 upALL NEW 3RD MEMBER WITH FULL SPOOL New yoke only 79999 up $2099 add910 48346 RATIO 28-spline 5099 add910 48347 RATIO 8599 addSPOOL OPTIONS 31-splineLIGHTWEIGHT E | FORD 9”MEGALITEMOTIVE AX LIGHTENED RATIOS “••• ALFLeiaXgsshts”etrrowSateacEitcgienRhlgetIrrmaEintaigSossngGeaEr ARSB | FORD 9” RING AND PINION 919 19514 5.14 $16499 ea 919 89 4.78 4.78 $35199 eaCIRCLE TRACK GEARS 919 19529 5.29 16499 ea 919 89 5.00 5.00 35199 ea 919 19543 5.43 16499 ea 919 89 5.29 5.29 35199 ea919 19350 3.50 $16499 ea 919 19567 5.67 16499 ea 919 89 5.37 5.37 35199 ea919 19370 3.70 16499 ea 919 19583 5.83 16499 ea 919 89 5.43 5.43 35199 ea919 19389 3.89 16499 ea 919 19600 6.00 16499 ea 919 89 5.50 5.50 35199 ea919 19411 4.11 16499 ea 919 19620 6.20 16499 ea 919 89 5.57 5.57 34799 ea919 19457 4.56 16499 ea 919 19633 6.33 16499 ea 919 89 5.83 5.83 35199 ea919 19471 4.71 16499 ea 919 19650 6.50 16499 ea 919 89 6.00 6.00 34799 ea919 19486 4.86 16499 ea 919 89 6.14 6.14 34199 ea919 19500 5.00 16499 ea 919 89 6.20 6.20 34799 ea 919 89 6.33 6.33 34799 ea C | NEW 9” FORD 919 89 6.50 6.50 34199 ea •CA3.2R5”RcaIpEsRwiHll oOnlyUwSorIkNwGith 919 89 6.66 6.66 34499 ea 919 89 6.83 6.83 33799 ea 919 89 7.00 7.00 31099 ea 919 89 7.16 7.16 31399 ea 919 89 7.33 7.33 31399 ea CAST IRON •• 35-40 spline not 28- or 31-spline LITE ALUMINUM Forged caps Most stock differentials use the 3.062” O.D. bearings • Aluminum case will save you 20 lb. over F | ULTRA LITE the cast-iron version RING GEAR •OPLaTboIrOopNtion is only available on Ford 9” ring 910 48390 Cast-iron with 3.062” caps $23999 ea 910 48392 Cast-iron with 3.25” caps 24999 ea 910 48394 Aluminum with 3.25” caps 32999 ea gear when you purchase new ring and pinion 919 0957 3.25” bearing kit 8999 ea •• Made to order, ships 24-48 hours Can lighten up to 2.6 lb. depending on ratio 916 00013 $9799 ea D | FORD 9” PINION G | FORD 9” •••SUMTEihtuPehcyePhruscOstaersoRatn-ligTaroergSnretohrreOan.lDus.mtobicenkaurming than stock •STFiEtsEstLandYaOrd KE 910 48396 Cast-iron pinion support $7999 ea 28-spline pinion gear $6999 ea 910 48361 Aluminum pinion support 6999 ea 802 92417 Short narrow yoke 7499 ea 910 4839 Bearing and seal kit 4499 kit 919 71100 Short wide yoke 7499 ea 919 0920 Solid pinion spacer and shim kit 1499 kit 919 71101 Long wide yoke128 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
9” Ford Rebuild REAR AXLEE | ECONOMY MINISPOOLS FORD 9”Works for dirt applications withnarrow tires and claimer motors655 2801 28-spline – Speedway Motors $1899 ea655 3101 31-spline – Speedway Motors 1899 ea655 7520 3⁄4” chromoly cross pin 999 ea $2299 ea••F | PREMIUM MINI SPOOLS FORD 9” 2299 ea A | FORD 9” OVERHAUL KIT 999 ea 8620 steel for maximum strength • Includes pinion pilot, pinion shafts, pinion nut, pinion seal, Works for most dirt applications, some asphalt gasket, shims, crush collar, sealant, gear marking grease,655 2800 28-spline – Speedway Motors •• brush, thread locker655 3100 31-spline – Speedway Motors Specify kit #28, 31, or 31S, See chart below655 7520 3⁄4” chromoly cross pin Ring gear bolts not included Note: All Ford 9” full spools use overhaul kit #919-0950-31 919 0950 KIT# With carrier bearings $8999 kit 919 0955 Without carrier bearings 5999 kit CARRIER BEARING DIMENSIONS KIT # P/N 919 0950 KIT # CARRIER I.D. SIDE BEARING O.D 28 LM501349 2.879” 31 LM102949 1.625” 2.879” 31S 3.063”G | HOUSING STUDS •H | RING GEAR BOLTS LM603049 1.781”• Carrier mounts, 10 pack 9” Ford, 10 pack 1.781”919 0915 $2299 set 550 2094 $1999 setJ | RING GEAR BOLTS•• 8.8 and 9” Ford ring gear bolts B | FORD 9” STEEL 10 black oxide 3/4” 12-point bolts •••FULASitvgLaahniLltdawabSerldeiPgwihnOte2iwg8Oeh- iotgLirhs3s816.9-.s0plbllbisn.se.101 2503003 $2899 ea 802 5034 STD SPLINE Standard weight 802 5034 LITE SPLINE Light weight $10499 eaK | FORD 12999 ea9” REAR••PUSRteeMueslaPcbolKree,InNonG-stAickScKoaEtinTg $14999 ea L | FORD 9” SHIM KIT 14999 ea • Includes pinion depth shims, $2999 ea preload shims, spacer, nut, etc. 3999 ea344 2302 Fel-Pro $1999 ea919 2300 Tru-Seal 899 ea 545 84751 $2999 kit C | FORD 9” MEGALITE 129 •FUWLeigLhsS5P.5O5 lbOs.LM | SOLID PINION BEARINGSPACER KIT WITH SHIMS 910 48611 28-spline919 0920 $1499 kit 910 48610 31-spline919 0921 Long spacer kit 1499 kit for Daytona pinion supportN | PINION BEARING CLIP D | 9” REAREND919 0912 $699 ea •SEElAimLinaRteEbTlowAoIuNtsEfroRmP | PINION • pressure spikes•••SESGFotAooroc9Ldk”rtFuooborbdveeprrisn4ei0oa0nl°starts to Seal remains seated properly with fork preload deteriorate at about 250° 919 6887 Pinion nut $499 ea •• Easy two bolt installation 919 0910 Pinion crush 499 ea High luster stainless steel finish912 S18833V Viton $999 ea collar for Ford 9” 910 48391 9” seal retainer - Ford912 S18833T Low drag te on 1699ea 910 48395 9” seal retainer - DaytonaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com
REAR AXLE Setup ToolsA | FORD 9” F | FORD 9” CARRIERVERTICAL LOAD •BEAlAlowRsItNo pGropTeOrlyOadLjust the side•PRVeOrtiTcaEl loCaTd sOtorCagAe bSoEx with bolt down lid, 910 82740 carrier bearings on 9” Ford• Cases can be stacked $1499 ea458 105 $6499 ea910 81080 Red Safety Racing 3499 eaB | FORD 9” G | ECONO FORD 9” RING AND PINION•PRLoOw TprEofCileT, hOorizConAtaSl sEtorage, •SEAlTl thUe tPooTls OneeOdeLd KIT with interlocking stack design for easy storage in trailer to install Sealed to protect your 9” ring and pinion• Ford carrier • Dial indicator with stand, yoke lock/carrier bearing nut wrench458 100 $5499 ea 910 82720 Set-up tool kit $7499 kit 916 82724 Yoke lock/Adjustable wrench 2199 ea BENCH H | FORD 9” COVER housing MOUNT • Aluminum cover to keep 9” clean when you have your third member outC | ASSEMBLY STAND • Available in black, blue, purple, red or polished•FOMoRuDnt i9t t”o DIFFERENTIAL 910 81007 COLOR $1499 ea your workbench or remove the base and mount on your engine stand910 81005 $3999 ea STEEL MINI 8 BOLTD | PROFESSIONAL RING STEEL FULLAND PINION GEAR 8 BOLT••SEMUTsoesstUtahcePcusarTamtOeerbOinegaLrainnKgdItphTienicoanrrtioeroul asevsaitloabinlesure ALUMINUM FULL 10 BOLT•• proper center line to pinion measurement STEEL FULL Does not assume that the cap is on the center as other tools do 10 BOLT Comes complete with indicator to set backlash, wooden storage box and instructions on proper usage•• Works on 9” Ford ALUMINUM FULL Dans with lower number than 60 and most other passenger car 8 BOLT rear ends and small trucks910 82725 $39999 eaE | RICHMOND GEARINSTALLATION•INSShoTwRs yUouChTowIOtoNproDpeVrlyDinstall ring and | •••J DWARF AND LEGEND SPOOLS pinion gear sets bolt Toyota rear end Packed with important information for correct For Dwarf and Legend cars using the common 8 or 10• installation procedures Steel or aluminum Mini spool for the 8 boltAPPLICATIONS COVERED INCLUDE: 970 1000 Steel mini spool - 8 bolt - 1.18 lb. $3999 eaCHRYSLER 8.25”, CHRYSLER 8.75” AND 9.25”, CORVETTE 1955 PRESENT, 970 1002 Steel full spool - 8 bolt - 2.92 lb. 14999 eaDANA 28 44 60, FORD 7.50”, 8”, 8.8XV AND 9”, GM 10 BOLT, 970 1006 Aluminum full spool - 8 bolt - 1.24 lb. 16499 eaGM 12 BOLT CAR AND TRUCK. 970 1004 Steel full spool - 10 bolt - 3.56 lb. 14999 ea 970 1008 Aluminum full spool - 10 bolt - 1.74 lb. 16499 ea237 9334 $1999 ea130 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
10 & 12 Bolt Chevy REAR AXLED | RING & PINION •A | GM 10 BOLT 7.5•INInSclTudAesLcLovAerTgaIsOkeNt, cKrusIhTsSleeve, Specs: 7.50” dia. ring gear; marking compound and brush, pinion 1.438” dia. pinion 27-spline and carrier bearings, pinion nut •• See left for installation kit washer, pinion seal, thread locking Note: When using a carrier from an original 3.23 or numerically compound, sealer and shims lower, you need to use the ring gear spacer listedPART # APPLICATION PINION SPINE PRICE 910 48305 Ring spacer with bolts $4499 ea919 831023 GM 10 bolt, 7.5 R & P (‘81-up) 27 $7499 kit919 831021 GM 10 bolt, 8.5 R & P 30 MAKE YEAR 7499 kit All GM models except H body Monza, Vega and Starfire ‘77-’99 Camaro, Firebird ‘82-’99E | GM 8.5” STEEL S-10, S-15, Astro Van ‘83-’99•FUMaLdLe SPOOL alloy heat PART# RATIO PRICE 919 13 308 3.08 $23699 ea from 4130 Aircraft 919 13 323 3.23 treated steel 919 13 342 3.42 21099 ea•• Choose 28- or 30-spline 919 13 373 3.73 16499 ea Needs C-clip eliminator 919 13 390 3.90 16499 ea 919 13 410 4.10 25699 ea910 48528 28-spline $14999 ea 919 13 456 4.56 16499 ea910 48530 30-spline 14999 ea 22199 eaF | GM 12 BOLT STEEL•FUMaLdLe SPOOL from 4130 Aircraft alloy heat treated steel |• Needs C-clip eliminator B GM 10 BOLT 8.5 dia. pinion 30-spline910 41230 30-spline $14999 ea ••• Specs: 8.50” dia. ring gear; 1.625” and numerically lower, the $2499 ea See upper left for installation kits (Note: When replacing stock 2.56 carrier must be replaced with a carrier of 2.73 or higher.*)G | 4130 CHROMOLY • LH thread ring gear boltsCROSS PIN FOR GM 10•BOReLquTire8d.f5or R&P MAKE YEAR 5.38 or higher Chevrolet, Chevelle, Olds F-85 ‘70-’76 ratios of Chevy II ‘70-’75 Camaro, GTO/Firebird ‘70-’81919 800272 Z-28, Trans Am ‘72-’81 EXCEL RICHMOND GEARS RATIO PRICE 919 10 308 3.08 $20899 ea 919 10 342 3.42 919 10 373 3.73 16499 ea 919 10 410 4.10 16499 ea 919 10 456 4.56 16499 ea MOTIVE GEAR PERFORMANCE RATIO 16499 ea 919 10 390 3.90 PRICE 919 10 430 4.30 $22799 ea 919 10 488 4.88 25199 ea 919 10 513 5.13 21499 ea 919 10 538 5.38 22599 ea 919 10 557 5.57 26499 ea 27799 eaH | REAR AXLE BREATHER1 910 45845 AN 4 bulkhead $1299 ea ‘65 ’98 465 621330 Breather only 899 ea 7⁄16”-20 thread 999 ea C | GM AND CHEVY2 910 45840 13⁄4” Breather •MSIpNooIlsSaPvaOilabOleLinSfour different applications3 475 22564 11⁄2” Breather 2999 ea3 475 22566 13⁄4” Kit 2999 ea PART NO. YEAR BOLT RING GEAR DIA. AXLE SPLINE PRICE4 475 22568 11⁄2” Kit 4299 kit 910 48602** ‘65-’70 Chevy 28 $10499 ea4 475 22569 3⁄8” breather vent 4299 kit 910 48600** ‘65-’76 Chevy 10 8.2” 30 10499 ea5 465 621090 1⁄2” breather vent 1899 ea 910 48601** ‘70-’76 Chevy5 465 621100 5⁄8” breather vent 1899 ea 910 48603** ‘77-’98 GM 12 87⁄8” 28 10499 ea5 465 621110 3⁄4” breather vent 2799 ea5 465 621120 Breather and tank 2799 ea 10 8.5” 26 10499 ea6 910 45849 6999 ea 10 7.5” **WILL NOT WORK IN POSI REARENDSORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 131
REAR AXLE Quick Change GearsA | 10 SPLINE 8620 STEEL WINTERS 4.12 R & P RATIO 4.86 R & P RATIO E | PREMIUM LIGHTWEIGHT 8 33 TEETH 7 34 TEETH •••101GFi.rt5esSlaWbtPsif.noLltirgeIcrhrNsat,etFEerradlanGetkcelrEaemnaAodsed,RsBeuylsSollduEor grTo(tDatMinI)g, Twigeeigr,ht SET # #0F TEETH LOW HIGH LOW HIGH Halibrand, Jones and other 1 21/21 quick change rear ends 2 27/28 4.12 4.12 4.86 4.86STANDARD QUICK 5 24/25 3.97 4.27 4.69 5.04 566 650 SPECIFY $13999 set 15A 21/22 3.96 4.29 4.67 5.06CHANGE GEARS 15 19/20 3.93 4.32 4.64 5.09 PEM 4.11 R & P RATIO 4.86 R & P RATIO 26 27/29 3.91 4.34 4.62 5.11 8 33 TEETH 7 34 TEETH802 85 SPECIFY $6999 set 6 23/25 3.84 4.43 4.53 5.22 SET # #0F TEETH802 85 QTY Three or more sets 6499 set 25 20/22 3.79 4.48 4.47 5.28 LOW HIGH LOW HIGH 12 26/29 3.75 4.53 4.42 5.34 1 21//21B | PLASTIC GEAR BOX 7 23/26 3.69 4.60 4.36 5.42 2 27/28 4.11 4.11 4.86 4.86 7A 21/24 3.65 4.66 4.30 5.49 15 19/20 3.96 4.26 4.68 5.04•• Protects gears from damage 17 26/30 3.61 4.71 4.25 5.55 3.91 4.33 4.63 5.1 Speedway available in 17A 24/28 3.57 4.75 4.21 5.60 15/16 3.85 4.38 4.56 5.18 Black, Purple, Red or White 8A 23/27 3.53 4.81 4.17 5.67 26 27/29 3.83 4.41 4.52 5.22 8 22/26 6 23/25 3.78 4.47 4.47 5.28916 81204 Speedway Motors $599 ea 19 21/25 3.51 4.84 4.14 5.70 25 20/22 3.74 4.52 4.42 5.34106 60990 AFCO (Blue only) 1099 ea 9A 25/30 3.49 4.87 4.11 5.74 12 26/29 3.68 4.58 4.36 5.42 9 19/23 3.46 4.91 4.08 5.78 7 23/26 3.63 4.65 4.3 5.49C | QUICK 11 22/27 3.43 4.94 4.05 5.83 7A 21/24 3.6 4.7 4.25 5.55CHANGE 3 25/31 3.40 4.99 4.02 5.88 17 19/22 3.54 4.77 4.19 5.63•GEPeArfeRct CHART 13 20/25 3.36 5.06 3.96 5.96 8 22/26 3.48 4.86 4.11 5.74 18 23/29 3.32 5.11 3.92 6.02 19 21/25 3.45 4.89 4.08 5.78 for the 18A 22/28 3.30 5.15 3.89 6.07 9A 25/30 shop or the trailer 4A 18/23 3.27 5.20 3.85 6.12 9 19/23 3.42 4.93 4.05 5.83 20A 21/27 3.24 5.24 3.82 6.18 11 22/27 3.39 4.98 4.01 5.88916 81208 $399 ea 4 24/31 3.22 5.26 3.80 6.21 3 25/31 3.35 5.04 3.96 5.96 20 20/26 13 20/25 3.31 5.1 3.92 6.02D | OIL $3999 ea 22 19/25 3.20 5.30 3.78 6.25 18 19/24 3.29 5.14 3.89 6.07DRIP PAN 16 18/24 3.19 5.32 3.76 6.27 18A 22/28 3.26 5.18 3.85 6.12FOR QUICK 10 17/23 3.17 5.36 3.74 6.31 4A 18/23 3.23 5.23 3.82 6.18•••CHACMolalAmxailfNmuomruGtmianbEuclmeaUpecarogNcniotsnyItTor-um6Scqitciuohanartnsdle 10A 22/30 3.13 5.42 3.69 6.39 4 24/31 3.22 5.25 3.8 6.21 34A 16/22 3.09 5.49 3.65 6.48 20 20/26 3.18 5.31 3.76 6.27910 81009 34 21/29 3.05 5.57 3.59 6.57 22 19/25 3.16 5.34 3.74 6.31 14 23/32 3.02 5.62 3.56 6.62 16 24/32 3.12 5.41 3.69 6.39 14A 20/28 3.00 5.67 3.54 6.68 10 20/27 35 17/24 2.97 5.69 3.52 6.71 34 16/22 3.08 5.48 3.64 6.48 32 19/27 2.96 5.73 3.49 6.76 14 23/32 3.04 5.56 3.59 6.57 32A 23/33 2.94 5.77 3.47 6.80 35 17/24 2.99 5.65 3.53 6.68 24 20/29 2.92 5.82 3.44 6.86 32 19/27 2.95 5.72 3.49 6.76 36 17/25 32A 23/33 2.91 5.8 3.44 6.86 37 21/31 2.90 5.86 3.42 6.90 24 20/29 2.89 5.84 3.42 6.9 23 22/33 2.87 5.91 3.39 6.97 36 17/25 2.86 5.9 3.39 6.97 21 19/29 2.84 5.97 3.35 7.04 23 18/27 2.83 5.96 3.35 7.04 21A 15/23 2.80 6.06 3.31 7.14 21 17/26 2.79 6.05 3.3 7.14 27 22/34 2.79 6.08 3.29 7.17 27 22/34 2.74 6.16 3.24 7.29 43 16/25 2.75 6.18 3.24 7.29 43 16/25 2.69 6.28 3.18 7.43 28 19/30 2.70 6.29 3.18 7.41 28 19/30 2.66 6.35 3.15 7.51 28A 17/27 2.69 6.32 3.17 7.45 29 15/24 29 15/24 2.67 6.37 3.15 7.51 30 16/26 2.63 6.42 3.11 7.59 39 18/29 2.64 6.44 3.11 7.59 41 17/28 2.6 6.49 3.08 7.67 30 16/26 2.61 6.51 3.08 7.67 31 21/35 2.57 6.58 3.04 7.77 40 19/31 2.59 6.54 3.06 7.71 33A 16/27 2.53 6.68 2.99 7.91 41 17/28 31A 14/24 2.5 6.77 2.95 8 31 21/35 2.58 6.59 3.04 7.77 50 20/35 2.47 6.85 2.92 8.1 33A 16/27 2.56 6.64 3.02 7.83 2.44 6.94 2.88 8.2 33 20/34 2.54 6.70 2.99 7.89 2.39 7.05 2.83 8.33 31A 21/36 2.53 6.72 2.98 7.93 2.35 7.19 2.77 8.5 30A 15/26 2.50 6.81 2.95 8.00 50 20/35 2.47 6.87 2.92 8.10 51 17/30 2.44 6.95 2.88 8.20 52 18/32 2.42 7.00 2.86 8.26 53 19/34 2.40 7.06 2.84 8.33 54 15/27 2.38 7.14 2.80 8.42 55 16/29 2.35 7.21 2.78 8.50 56 17/31 2.34 7.27 2.75 8.57 57 16/30 58 17.32 2.32 7.32 2.73 8.64 2.30 7.37 2.72 8.69 2.29 7.42 2.70 8.74 2.27 7.47 2.68 8.80 2.26 7.51 2.67 8.86 2.20 7.73 2.59 9.11 2.19 7.76 2.58 9.14132 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Quick Change Gears REAR AXLEE | QUICK CHANGE GEARS• Made with proprietary steel and proprietary heat treating•• Under cut for light weight | AXLE TUBES Crown shaved tooth profile For wide 5 hubs917 14 SPECIFY Single sets $22499 ea •A917 14 QTY Three or more 21499 eaSET # # TEETH SPUR 4.11 4.11 4.57 4.57 4.86 4.86 919 7334 LENGTH Steel $9799 ea RATIO LOW HIGH LOW HIGH LOW HIGH 919 7335 LENGTH Aluminum 22499 ea1 20/20 1.000 4.11 4.11 4.57 4.57 4.862 28/27 1.037 3.96 4.26 4.41 4.74 4.69 4.86 TUBE LENGTH = A AXLE LENGTH = C LENGTH 4.39 4.76 4.67 5.04 265⁄8”5 25/24 1.042 3.95 4.28 4.35 4.80 4.63 5.06 25” 381⁄4” -38 4.30 4.86 4.57 -3615 21/20 1.050 3.91 4.32 4.24 4.92 4.51 5.10 241⁄2” 365⁄8” -36* 4.20 4.97 4.47 -3515K 17/16 1.063 3.87 4.37 4.15 5.03 4.42 5.16 231⁄2” 361⁄8” -34 4.09 5.11 4.35 -3326 28/26 1.077 3.82 4.43 4.04 5.17 4.30 5.23 221⁄2” 351⁄8” -32 -32*6 25/23 1.087 3.78 4.47 4.00 5.22 4.25 5.28 22” 341⁄8” -31 3.97 5.26 4.23 -2925 22/20 1.100 3.74 4.52 3.95 5.29 4.20 5.35 21” 331⁄2” -28 3.89 5.36 4.1412B 19/17 1.118 3.68 4.59 3.87 5.40 4.11 5.43 203⁄8” 325⁄8” 3.84 5.44 4.087 26/23 1.130 3.64 4.65 3.81 5.48 4.05 5.49 193⁄8” 32” 3.78 5.53 4.017K 24/21 1.143 3.60 4.70 3.74 5.59 3.98 5.55 181⁄8” 31” 3.70 5.65 3.9317K 23/20 1.150 3.57 4.73 5.59 165⁄8” 293⁄4” 3.66 5.71 3.8917 22/19 1.158 3.55 4.76 3.62 5.77 3.85 281⁄4” 3.59 5.82 3.82 5.63 * MUST BE SHORTENED APPROXIMATELY 1⁄2”8K 27/23 1.174 3.50 4.82 3.58 5.84 3.80 5.718 26/22 1.182 3.48 4.86 3.55 5.88 3.7819 25/21 1.190 3.45 4.89 3.52 5.94 3.74 5.74 3.47 6.01 3.699B 24/20 1.200 3.43 4.93 3.43 6.09 3.65 5.79 3.38 6.18 3.599 23/21 1.211 3.40 4.98 3.34 6.25 3.55 5.8311 22/18 1.222 3.36 5.02 3.31 6.31 3.52 5.88 3.29 6.35 3.503B 21/17 1.235 3.33 5.08 3.26 6.40 3.47 5.94 3.24 6.45 3.44 6.0013 25/20 1.250 3.29 5.14 3.22 6.49 3.4218 24/19 1.263 3.25 5.19 3.18 6.57 3.38 6.08 3.15 6.63 3.35 6.1418Q 28/22 1.273 3.23 5.23 3.11 6.72 3.30 6.19 B | RING AND PINION 3.10 6.75 3.29 6.214K 23/18 1.278 3.22 5.25 3.05 6.86 3.24 6.25 •• For quick change with threaded ring gears Comes with ring gear bolts4B 27/21 1.286 3.20 5.28 2.99 6.98 3.1820 26/20 1.300 3.16 5.34 2.95 7.08 3.14 6.32 802 5714 $32499 ea22 25/19 1.316 3.12 5.41 2.92 7.14 3.11 6.39 802 51457 4.11 bare 36999 ea 2.89 7.22 3.0816 24/18 1.333 3.08 5.48 2.88 7.26 3.06 6.48 802 5400 4.57 bare 27999 ea 2.86 7.31 3.0410 23/17 1.353 3.04 5.56 2.84 7.36 3.02 4.86 bare 6.58 LOADED WITH ROLLER BEARING AND POSI LOCK NUT34A 26/19 1.368 3.00 5.62 2.81 7.43 2.99 6.65 802 5714L $41999 ea34 29/21 1.381 2.98 5.68 2.80 7.46 2.98 6.71 802 52457 4.11 loaded 2.77 7.53 2.95 45999 ea14 25/18 1.389 2.96 5.71 2.74 7.62 2.92 6.75 802 5400L 4.57 loaded 41999 ea 2.71 7.71 2.8814K 28/20 1.400 2.94 5.75 2.69 7.77 2.86 6.80 4.86 loaded 2.67 7.83 2.8435 24/17 1.412 2.91 5.80 2.63 7.92 2.80 6.86 See lubricants on page 265-26932 27/19 1.421 2.89 5.84 6.9132B 23/16 1.438 2.86 5.9124 29/20 1.450 2.83 5.96 6.9936 25/17 1.471 2.79 6.04 7.05 C | FLUSH MOUNT REAR 7.15 •ENAlDumFinuILmL, 24CoAz. Nholds enough37B 31/21 1.476 2.78 6.0723 24/16 1.500 2.74 6.17 7.17 7.2921 29/19 1.526 2.69 6.27 7.42 rear end lube to fill standard27B 31/20 1.550 2.65 6.37 7.53 Winters or Franklin rear ends43 25/16 1.563 2.63 6.42 7.59 ••• 71⁄4” tall, 3” diameter28 30/19 1.579 2.60 6.49 7.67 Mounting flange is 81⁄2” diameter28B 27/17 1.588 2.59 6.53 7.72 AN 10 outlet29 24/15 1.600 2.57 6.5839 29/18 1.611 2.55 6.62 7.78 910 45850 $2999 ea 7.8330 26/16 1.625 2.53 6.6840 31/19 1.632 2.52 6.71 7.90 D | ALUMINUM CAN41 28/17 1.647 2.50 6.77 7.93 8.00 • Aluminum, 24 oz. holds enough 8.10 rear end lube to fill standard31 30/18 1.667 2.47 6.85 8.20 Winters or Franklin rear ends33K 27/16 1.688 2.44 6.94 8.26 Available in AN 833 34/20 1.700 2.42 6.99 8.33 •• 71⁄2” tall, 31⁄4” diameter31A 24/14 1.714 2.40 7.0530A 26/15 1.733 2.37 7.12 8.42 910 45852 $3999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 133
REAR AXLE Quick Change Replacement Parts A | QUICK CHANGE •GEPeArfeRct CHART for the shop or the trailer • Laminated 802 1000 10-spline $499 ea 802 6000 6-spline 499 ea WINTERS REPLACEMENT PARTSPART# DESCRIPTION # PART# DESCRIPTION #802 K1663 R Mag six rib right side bell 2 802 7406 30802 K1663 L Mag six rib left side bell 3 802 7476 O-ring, bearing cap ts heavy duty cover 30802 503411A 31-spline aluminum spool 30A802 5400 Ring and Pinion (Standard with 4.86 ratio) 4 802 7496 O-ring, bearing cap ts tumbled cover 802-6746 33802 7403 O-ring (8 rib bell) 35802 7403T O-ring (4 and 6 rib bell) Back up ring, O-ring ts heavy duty cover 36802 7205 Seal, side bell 5 802 7794AR 3⁄8”-16 aluminum high nut 37802 7310 Bearing cup, side bell 6 802 7802 3⁄8”-16 x 13⁄4” stud, gear cover 37802 7309 Bearing cone (Steel spools and di erentials) 6* 802 7610 38802 7340 Bearing cone (Aluminum spools and di erentials) Snap ring, lower shaft 39802 5295 Shim kit (Aluminum spools and di erentials) 7 802 500302 Standard lower shaft 40802 7852 Ring gear bolt (Threaded ring gear) 8 802 5003 Heat treated lower shaft 40802 7815 3⁄8” belleville washer (Threaded ring gear) 9 802 7390 41802 7111B 3⁄8” recessed socket head pipe plug 9 802 7413 Front ball bearing, lower shaft 41802 7331 Roller bearing, pinion nose 41802 7339 Shielded ball bearing, lower shaft 10 802 7653 O-ring, seal plate 42802 7308 Bearing cone, pinion shaft 43802 7307 Double bearing cup, pinion shaft 11 802 7652 Snap ring, seal plate (.375” seal) 44802 5055 Bearing washer 45802 6485R Posi-lock nut, pinion shaft 12 802 7204 Snap ring, seal plate (.750” seal) 46802 7445 O-ring, posi-lock 47802 6484 Posi-lock retainer, pinion shaft Seal, seal plate (Thin seal .375”) 48802 5020 Retaining ring, pinion 13 802 7204T Seal, seal plate (Thick seal .750”) 54802 6296A Retaining plate, pinion 14 802 7204V Seal, seal plate (Viton seal .750”) 54802 2374 Lock tab 15 802 7444 O-ring, seal 55802 6729 Gasket, gear cover 16 802 K501801M Seal plate .750 seal 56802 K3736 Heavy duty mag cover 17 802 7114 3⁄8” SAE flat washer 57802 6746 Standard rear cover 18 802 7107 58802 7524 Ball Bearing for 802-K6508 and 802-K3736 19 802 6532 3⁄8”-16 x 11⁄4” HHCS, Seal plate 58 60 20 802 5038 Spacer, drive yoke 61 21 802 5037 Drive yoke, steel 22 802 7155 Retaining washer, drive yoke 23 802 6149 1⁄2”-13 adjusting screw (8 rib bell) 24 802 7167 1⁄2”-13 adjusting screw ( 4 and 6 rib bell) 27 802 7137 1⁄2” SAE flatwasher, adjusting screw 28 802 5010 1⁄2”-13 jam nut, adjusting screw 28 802 7109 Thrustblock 3⁄8”-24 x 1” HHCS, 8 rib side bell 29 802 7109S 3⁄8”-24 x 3⁄4“ HHCS, 4 and 6 rib side bell 802 7454 O-ring, plug 802 6857 Inspection plug D | POSI LOCK •NUPeTrmAitsSeaSsyErMemBovLalYand doesn’t readily come off when changing quick change gears •• Fits current and old style ring and pinion Left or Right HALIBRAND WINTERS 802 6498 SPECIFY Winters $5499 eaB | GEAR COVER C | REAR END E | SET UP••SHSBelaOtcokRf 1T0 fNor UwinTteKrsIT COVER GASKETS ••BESSetAete-uRl poIrtNoaoluGlmoSninlyu,mnostpfooorlpermanent use802 6390ASBK Winters 919 6875 Halibrand Paper $999 ea802 7794AR Tall Red nuts only 919 6876 299 ea 802 6729HD Winters Paper 799 ea 802 8440 802 8447 Winters Heavy Duty 802 5138 2.000” Set-up - steel $4499 kit Winters billet cover O-ring 699 ea $2699 ea 599 ea Winters 6 bolt cover O-ring 699 ea 802 5294 2.031” Set-up - aluminum 2699 ea134 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Quick Change Rearends REAR AXLE QUICK-CHANGES FOR MODIFIEDSC | LIGHTWEIGHT 6 BOLT A | BASIC QUICK CHANGEREAR COVER WITH MANY •••••603S64Stp-1.”1re-ri2esbiOnplost3lriicNn”d4eete.nu8abCtb6leeuerErlsmilnasNwlgiunimtauThnmiEdnGusrRppaminonPdoicoalNnIsNeatiIoOnaNl ends•••••••FRSL64T3Sopth.1-I1rew-eriC2esbirnplmodTst3lrriiacn”daI4elegteO.cnu8ubostb6eeNleaetrartlrsilealnmsswRdlgiagiEtaghhnntDdGeaslrpuUiauimnnmCdiioncNInuaNamsteiGospnoaOloelPndTs IONS COMPLETE REARENDS COME WITHCOMPLETE REARENDS COME WITH •••••••••• Bare rear listed above Bare rear listed above Speedway Grand National hubs, bearings and seals Winters platinum Grand National hubs, bearings and seals Aluminum drive plates Aluminum drive plates 31-spline solid axle 31-spline gun drilled axle .810 brake rotors .810 brake rotors 802 5063 BARE Basic quick change - 4.86 rp $139999 ea802 5066 BARE 6-bolt rear cover quick change - 4.86 rp $189999 ea 802 5063 COMP Basic quick change and kit - 4.86 rp 179999 kit802 5066 COMP 6-bolt rear cover quick change and kit - 4.86 rp 229999 kit 802 5068 BARE Basic quick change - 4.12 rp 142499 ea802 5070 BARE 6-bolt rear cover quick change - 4.12 rp 192499 ea 802 5068 COMP Basic quick change and kit - 4.12 rp 179999 kit802 5070 COMP 6-bolt rear cover quick change and kit - 4.12 rp 244999 kit 802 5052 24 Axle tube only 10999 ea802 5052 24 10999 ea Axle tube onlyD | LIGHTWEIGHT 6 BOLT B | LIGHTER WEIGHT QUICK CHANGEREAR COVER WITH 27⁄8” LARGE HUB AND ••••••••WB346LSTSIotph1.-i1Tgrew-eri2esbibrnHplmodest3lrriiaacn”daM4relegtei.cnnu8ubosgtb6AeeleaetrrartlrseiNlealnmssawdlgiragYictaghhonntFvdGeaeRslrpuriauiwmnInmCdiiiotnhcNnTuaramseIteOitosapninNoaelorelRndEsDUCING OPTIONS••••••BESST364pth1-.1Are-eri2esbirnpRlmost3lriiacIn”d4eNlete.cnu8ubotb6GeleaetrrtlrsiSleanmswdlgiagFitaghhRnntdeaIslpCuiuimnTmiionIcnuOamseNspRooEl DUCING OPTIONS Grand National ends••• Low drag seals COMPLETE REARENDS COME WITH Lightweight 3” tubes with 27⁄8” bearings ••••• Winters platinum 27⁄8” Caliper not Bare rear listed above Grand National hubs, bearings and seals included Winters platinum Grand National hubs, bearings and seals••• Steel drive plates Aluminum drive plates 31-spline gun drilled axles 31-spline gun drilled axle .810 brake rotors .810 brake rotors802 5067 6-bolt rear cover quick change - 4.86 rp $224999 ea 802 5065 BARE Light weight quick change - 4.86 rp $179999 ea802 5071 6-bolt rear cover quick change - 4.12 rp 227499 ea 802 5065 COMP Light weight quick change and kit - 4.86 rp 229999 kit802 3269 Winters 27⁄8” nut wrench 999 ea 802 5069 BARE Light weight quick change - 4.12 rp 182499 ea802 7284 Viton hub seal 27⁄8” hubs 1599 ea 802 5069 COMP Light weight quick change and kit - 4.12 rp 224999 kit 802 5052 24 10999 ea Axle tube onlyORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 135
REAR AXLE Quick Change PartsA | QUICK CHANGER G | SPECIAL SEAL PLATE FOR MODIFIEDS••REQGruAeiacRkt fcoEhraNsntogDcekreBcaarrRseaEnndAdbmTreoHadthiEfeierRd 802 K501801M $4199 ea802 296602 $3199 eaB | GEAR OIL H | AXLE TUBE FOR GRAND ••NARFoeTrp6laI0cO”eomNnecAnetnL3t”eQsrtraeUnadrIeaCnrddKstubCeHs wAithNgGranEd national ends•••• 80-90-140w gear oil 1 Gallon 802 5052 24 Fits Grand National hubs $10999 ea Reduce friction 802 3916 Fits 27⁄8” hubs 9999 ea Lower temp802 1730 $5299 ea J | RACING GEAR OIL • Increases usable horsepower to the ground by reducing drag and frictionC | HUB BEARING NUT WRENCH, • Contains special anti-wear and lubricity agents••2 7/8 REAREND TUBES •• Special synthetic base stocks Increased thermal stability Steel Construction Zinc Finish 1 484 104561 L9 Racing gear oil, 1 qt. $2799 ea 484 10456 L9 Racing gear oil, case 12 25999 bx802 3269 $999 ea L10 Racing gear oil, 1 qt. 2 484 104601 L10 Racing gear oil, case 12 2899 ea 484 10460 28999 bxD | REPLACEMENT PARTS K | REAR END LUBEFOR 2 7/8 HUBS 910 44090 SAE 90, 1 gallon $5999 ea802 86822 27⁄8” bearing cup $1299 ea 910 44095 SAE 90, 1 gallon 26999 ea802 86821 27⁄8” bearing cone 3299 ea 910 44140 SAE 140, 1 gallon802 8349 27⁄8” retaining ring 499 ea 910 44145 SAE 140, 5 gallon 5499 ea802 3602 27⁄8” drive ange 7499 ea 26999 ea802 8423 27⁄8” hub o-ring 299 ea $1799 ea802 3935 27⁄8” hub kit 7199 ea 19999 ea 34899 eaE | REPLACEMENT O RING L | TRANSMISSIONFOR 6 BOLT BILLET AND GEAR LUBES 607 20100 Heavy gear oil, 1 quart 607 20120 Heavy gear oil, 1 gallon 607 20140 Gear oil, 5 gallon•••CORFSooeVrpldWlaEincinedRtmievrReidsnu6Eta-ObAllo-yrRlitncgEovNerDreSarends802 8447 $699 ea F | REAR COVERS M | SYNPOWER™ FULL SYNTHETIC GEAR OIL•• Magnesium 75W 90 1 quart $1199 ea Complete with bearings 795 9751 Box of 12 quarts 12599 bx 795 975 5 gallon 19999 ea 802 K6508 Standard $15999 ea 795 723856 $1499 ea 802 6746C Standard coated 17999 ea 75W 140 1 quart 17399 bx 802 K3736 Heavy-duty 18999 ea 795 9821 Box of 12 quarts 35999 ea 802 K3736C Heavy-duty coated 20999 ea 795 982 5 gallon 802 4873 Billet aluminum 24999 ea BILLET HEAVY DUTY 795 981136 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Brake Kits HUBS & BRAKESA | BOLT ON REAR DISC BRAKE KIT• Allow you to simply bolt disc brakes on 9” Ford, 10/12-bolt GM or 7.5” GM rearends• Includes two bolt-on caliper brackets, two vented rotors, two new GM metric calipers and hardware•••• Ford Kit has 5 on 41⁄2” and 5 on 43⁄4” bolt pattern 10/12-bolt GM kit has 5 on 41⁄2” and 5 on 43⁄4” bolt pattern 7.5” GM has 5 on 43⁄4” bolt pattern Minor ttting may be required1 910 31902 9” Ford $34999 kit2 910 31919 10 and 12 bolt GM 34999 kit3 910 31923 71⁄2” GM 29999 kit B | COMPLETE REAR DISC BRAKE KITD | BASIC REAR DISC BRAKE KIT •• Kits for both Big GM and metric calipers Mounts .81” x 11.75” Pro-lite vented•• Kits for both Big GM and metric calipers rotors and calipers to 3” tube rearend Basic kits include brackets, steel .810” x 11.75” • Complete with rotors, hats, calipers, brackets, brake pads, and slide bolts•• vented rotors, hats and bolts • Hat ts 41⁄2”, 43⁄4“, 5” bolt circle Caliper brackets weld to 3” tube rear end Hat ts 41⁄2”, 43⁄4”, 5” bolt circle 910 31936 ‘69-’77 Big GM kit with 3” BS steel hat $23999 kit 910 31935 ‘69-’77 Big GM kit with 1.96” BS aluminum hat 25999 kit910 31920 ‘69-’77 Big GM with 3” BS steel hat $13999 kit 910 31931 Metric kit with 3” BS steel hat 25999 kit910 31910 ‘69-’77 Big GM with 1.96” BS aluminum hat 19999 kit 910 31932 Metric kit with 1.59” BS aluminum hat 27999 kit910 31925 Metric with 3” BS steel hat 14999 kit SERVICE PARTS $2499 ea910 31915 Metric with 1.59” BS aluminum hat 20499 kit 910 31906 .810” Pro-lite vented rotor 8799 eaSERVICE PARTS 835 1700317 1.59” BS aluminum hat 8799 ea910 31906 .810” x 11.75” vented rotor $2499 ea 835 1700208 1.96” BS aluminum hat 2999 ea835 1700317 1.59” BS aluminum hat 8799 ea 910 31904 3” BS steel hat 399 set835 1700208 1.96” BS aluminum hat 8799 ea 835 2300233 Rotor hat bolts 5⁄16” coarse 399 set910 31904 3” BS steel hat, ts 5 on 41⁄2”, 5 on 43⁄4”, and 2999 ea 835 2500071 Rotor hat nuts and bolts 5⁄16” ne 299 ea835 2300233 5 on 5” bolt circle patterns 399 set 835 2300542 Caliper slide bolt 1599 pr835 2500071 1/8 399 set 919 1562 Metric Super Stopper pads 1599 pr 5⁄16” coarse bolts for aluminum hat 919 1563 ‘69-’77 Big GM Super Stopper pads 5⁄16” x 3⁄4” ne thread bolts with nuts for steel hatsC | 11” DRUM BRAKE KIT• Kit has new 11” x 21⁄4” drums, shoes, wheel cylinders, springs, emergency arm and hardware910 31937 New style Big Ford with 2.5” axle o set. Drums drilled for 5 on 41⁄2” bolt pattern. 3.15” axle bearing. $47999 kitORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 137
HUBS & BRAKES Wide 5 HubsA | WIDE 5 HUB SEAL HUB CABREPLACEMENT PARTS LOCK WASHER OUTER BEARING LOW DRAG AND SPINDLE NUT912 S23756 Seal – 2.375” x 3.486” $599 ea CERAMIC BEARINGS835 2700374 Hub cap – 8 bolt hubs (shown) 999 ea835 2709498 Hub cap – 5 bolt hubs 899 ea919 G109 Gaskets, (4 and 8 bolt cap/ ange) 599 ea919 N105 RH Spindle nut, requires two 799 ea919 L104 Lock washer 299 ea912 T18720919 B790 Inner bearing cup (race) 1999 ea802 7324AC Inner bearing cone (bearing) 1199 ea912 7324AC Low drag inner bearing and race 4899 ea912 T18620 Ceramic inner bearing and race 11999 ea919 B690 1999 ea802 7325AC Outer bearing cup (race) 1099 ea912 7325AC Outer bearing cone (bearing) 3899 ea106 10202 Low drag outer bearing and race 10499 ea106 10200 Ceramic outer bearing and race 1499 ea Steel self-locking nut 1499 ea Aluminum self-locking nut F | WIDE 5 WHEEL ••••BEASEAaendAstojyupdRsirintezaIs-ebNtldoalealaGldalutaimoSnndiPnuAmCERB | STARLITE 55LIGHTWEIGHT••DEMRaaIccVhhiEnveeFdbfLorolAtmdNr7iv0Ge75E-aTn6gaellkoiyt includes • reduce drag the end plate with screws Sold each835 2706733L $6999 ea 910 10503 $4499 eaC | WIDE 5 G | ALUMINUM $999 ea•••••DMWMWARvaaoiIdacdrViekhleasi5EnbfwrealoeixFdmtlihenfLosbsRrAtilea2lerd4Nlti-otsaeGrpluhGlimEunobelidnsum SELF LOCKING •••SPWMSeIaildNfd-eleoD5ocklfoLilnicgEkghnftNouartlUuadmTdinedumsafety and reliability835 2702290 COLOR 919 0210 $5199 eaD | LIGHTWEIGHT H | SELF LOCKING KIT•DDReIsVignEedFfLorAa NveGbEolt drive ange •••• Fits wide 5 (3⁄4 ton) spindles802 3230 Small hole for positive lock Stainless steel locking ring Replaces double locknuts and washer $5499 ea 106 10202 Steel $1499 ea 106 10200 Aluminum 1499 ea J | SPINDLE WRENCHE | LOW DRAG TEFLON ••• Fits all 3⁄4 ton/wide 5 spindle nutsSEAL FOR WIDE 5 1⁄2” drive, ts 23⁄8” O.D. nuts Purple anodized912 S23756T 2.375” x 3.486” x .437” $1899 ea 910 82301 $1999 ea138 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Wide 5 Hubs HUBS & BRAKES A | STARLITE “55” •W“I5D5” Ehu5bs RACING HUB•D | BALL BEARING WIDE 5 HUBS are a totally new design Includes drilled studs, seals, with gun drilled studs ball bearings and cap or drive ange ••••• Weigh only 6.57 lb. on the front, and 6.71 lb. on the rear•• Lightweight magnesium hubs reduce rolling resistance Rear hubs feature ve bolt drive anges Uses ball type bearings with oil instead of grease Front hubs feature snap on cap with hub cap 3.52” o set for DL/SL caliper802 4045 F Front hub $34999 ea Aluminum802 4045 R Rear hub 33999 ea802 3929 4299 ea 835 2706513BD Rear hub with drilled studs - black $13399 ea802 7439 Front cap 499 ea 835 2706735BD Front hub with drilled studs - black 14799 ea802 3230 Front cap o-ring 5499 ea 835 2706733 7499 ea802 7490 Drive ange 499 ea 835 2706913 Lightweight rear drive ange 1599 ea802 7210V Drive ange inner o-ring 1099 ea 835 2709498 Front snap on cap 899 ea802 8328 Oil seal 599 ea 5 bolt cap802 8430 Oil seal snap ring 499 ea Oil seal o-ring B | STARLITE “55” •W“I5D5” Ehu5bs RACING HUBE | G3 RACING GREASE are a totally new design• Full Synthetic with gun drilled studs Drip point 560 Degrees • Weigh only 6.57 lb. on the front, Long Lasting and 6.71 lb. on the rear• Designed for highest performance in •••• Rear hubs feature ve bolt drive anges wheel bearings and chassis lubrication Front hubs feature snap on cap with hub cap 3.52” o set for DL/SL caliper484 10484 $2499 ea AluminumF | RED N TACKY 835 2706513 Rear hub with drilled studs $11799 ea•GR16EoAz. cSarEtrid#g2e 835 2706513C Rear hub with 5⁄8” course studs 11199 ea 835 2706735 Front hub with drilled studs 13199 ea Rust and oxidation inhibitors 835 2706735C Front hub with 5⁄8” course studs 12499 ea Water resistant 835 2706733 7499 ea Excellent mechanical stability 835 2706913 Lightweight rear drive ange 1599 ea Long storage life 835 2709498 Front snap on cap 899 ea Agricultural, automotive and industrial applications 5 bolt cap484 105741 $21599 ea $499 ea C | STARLITE 19999 ea 1199 ea ••55BRootlXto-orDmn roWoutnoItrDpmlaoEtuen5stapHrelaUcteonBgured 4999 ea for both xed and dynamic rotor mounting 7199 eaG | ALMAGARD •• Include snap cap dust covers 2699 ea Rear drive anges, bolt-on dust caps, bearings/seals, and rotor bolt kits sold separately 139•VAMuRltiIfuPncUtioRnaPl gOreSasEe dLesUigBneRd fIoCr eAxcNepTtional mechanical stability, excellent extreme pressure 835 27012127C 55-XD Front Hub and high temperature capabilities 835 27012111C 55-XD Rear Hub• Use on chassis, wheel bearings and U-joints 835 2300840 Fixed mount bolt kit 835 2308454 Dynamic mount bolt kit498 3752 $1299 ea 835 2706732 Rear drive ange kits 835 3700563 Bearing/seal kitORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com
HUBS & BRAKES Front RotorsA | LIGHTWEIGHTHYBRID ROTOR••••FO15.58⁄801o”R.-05n1”1t5Ghd”UiicaoMNkmrC5eqMtoeunricE4k3⁄T4s”taRbrotIlsCttcuidrcsle D | HP MODIFIED*Not Designed for asphalt racing •••••HUNCE5GxoMeoaBmwncMte/5cteR”asotstbrlatOeioicnnrladtrgTonapstcOraodetrstwReisrint1h0r.5a0ce” sdaianmde5t/e8r”bcyo1a.r0s0e”wthhiecekl studs installed910 31034 5 on 5” Rotor – Speedway $5499 ea and ts the 1979 and up GM spindles910 31048 Bearing and seals, two rotors 3499 ea *Not Designed for asphalt racing 835 1609239 Rotor $5999 ea 835 3709537 Bearing and seals, one rotor 3499 kitB | ‘79 ’81 GM E | 101⁄2” GRANADA••••M‘51L8Ea02or.T5-ng’”8e5R7db”isIaoepCmarirn5einRdtogelneOr 4axtp3Ts1⁄4pm””OlbiocoaRsltttimocniersct,lremic uspstinudslees912-TS3 outer bearings •STDeYsiLgnEedRtoOTt OR Pinto spindles •• 5 on 5” bolt circles 5⁄8” coarse threads*Not Designed for asphalt racing *Not Designed for asphalt racing910 31061 5 on 5” Rotor – Speedway $4999 ea 916 74078 Rotor – Speedway (101⁄2”) $5499 ea910 31091 5 on 43⁄4” Rotor with 5⁄8” studs – Speedway 4999 ea 106 98506510 5499 ea912 TS3 899 ea 910 31071 Rotor – AFCO (11”) 599 pr550 2486 Outer bearing 699 pr 910 31000 Dust cap, 1.786” 1799 kit910 31048 Dust cap, 2.085” 3499 kit 910 615074 Bearing and seals, two rotors 699 kit Bearing and seals, two rotors Spindle nut kitC | GM METRIC F | ‘73 ’77BRAKE ROTORS MID SIZED•••••‘75RSW19t0aoohc.4nAcee”kes5-dNl”iansipaotsDumprtad5eelsaUltoereinindrnPs4xgt3a1⁄4l””letbdhoicltkcnirecslse •••G551M⁄81o””ncdRo5iaa”OrmbseoeTttltehOcrreixrRac1dle”s *Not Designed for asphalt racing*Not Designed for asphalt racing 910 31064 Rotor – Speedway $4999 ea 912 TLM11949 399 ea106 98506500 Rotor 5499 ea 912 TS34 ‘73-’77 Mid size outer bearing, .750” I.D. 999 ea106 98518550 Hub kit 2999 kit 550 2487 ‘80-’90 Impala spindle bearing, .844” I.D. 599 pr 910 31042 Dust cap, 2.085 zinc Bearing and seals, two rotors 2999 kit140 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Front Rotors HUBS & BRAKES Dust Cap with o-ring A | 10” HYBRID •RODeTsigOneRd to t Tapped plug for the Pinto spindle Complete with innerD | LOW FRICTION easy lling 1⁄8” NPT •••••O5OI5IM⁄8Lio”lCncbBAoa5atAa”hrpbsTp1eo0rtlHot”hvcHreei1rydacbd0lferosi”dr HYBRID ROTOR •• and outer races rotor with races installed 5 on 5” bolt circle Modi eds 5⁄8” coarse threads *Not Designed for asphalt racing*Not Designed for asphalt racing 910 31027 Rotor H.D. – Speedway $5499 ea 550 2486 699 pr910 31029 Rotor with dust cap $6999 ea 910 31000 Dust cap, 2.085”550 2489 499 ea 910 615074 Bearing and seals, two rotors 1799 kit557 75225 Dust cap for oil bath rotor only 199 ea Spindle nut kit 699 kit910 31000 Replacement dust cap o-ring only910 615074 Bearing and seals, two rotors 1799 kit910 31028 Spindle nut kit 699 kit LF-4 Hub Lube, 4 oz. 399 ea •B | 10” HYBRID ROTOR Designed to t the Pinto spindle • Complete with inner and outer racesE | SPINDLES WITH •• 5 on 5” bolt circle•PRAlElowLs OyouAr fDronBt hEuAbsRtoIbNeGtighStPwiAthCERS 5⁄8” coarse threads *Not Designed for asphalt racing• minimal drag and side pre-load 106 98506505 Rotor $5499 ea Easy adjust threaded sleeve and set screw ensure you’ll never 550 2486 699 pr worry about an over-tightened front hub again 910 31000 Dust cap, 2.085” 910 615074 Bearing and seals, two rotors 1799 kit1 910 31032 Pinto spindle $5499 ea Spindle nut kit 699 kit2 910 31033 Metric spindle 5499 ea E | 10” HYBRID •RODeTsigOneRd to t the Pinto spindle | • Complete with inner BEARING KITS and outer racesF •• 5 on 5” bolt circle For metric and hybrid rotors 5⁄8” coarse threads•WILWOOD835 3709537 Metric rotors $3499 ea *Not Designed for asphalt racing835 3709545 Hybrid rotors 2999 eaAFCO 835 1609240 Rotor $5999 ea106 98518550 Metric rotors $2999 kit 550 2486 699 pr106 98518551 Hybrid rotors 2999 kit 910 31000 Dust cap, 2.085” 910 615074 Bearing and seals, two rotors 1799 kit Spindle nut kit 699 kitORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 141
HUBS & BRAKES Bolt-On RotorsA | PRO LITE E | SRP DRILLEDVENTED ••PEPSurReitmaFbiuOlemfRogrrMamdoeAd, meNreaCdteiuEmRwOeigThtOcaRstSings•••RO3T7h2”, rT8vuahOtnohelrReeabSdolt circle temperature racing to street use PART # SIDE THICK O.D. WEIGHT PRICE 835 1607101BK Right 0.810” 11.75” 8.00 lb. $13699 eaPART # THICK O.D. WEIGHT PRICE 835 1607102BK Left 0.810” 11.75” 8.00 lb.910 31906 0.810” 11.75” 8.00 lb. $2499 ea 13699 ea910 31908 0.810” 12.19” 8.70 lb.910 31905 1.25” 11.75” 8.70 lb. 2499 ea 2499 ea F | PILLAR VANE •SLStOrenTgTthEofD80RvaOneT, ORS weight of a 32 vaneB | STRAIGHT •• 7”, 8 hole bolt circle•••V3T7Ah2”, rN8vuahtEnohelreReabOdoltTciOrclRe S Thru threadPART # THICK O.D. WEIGHT PRICE PART # SIDE THICK O.D. WEIGHT PRICE106 98506021 0.810” 11.75” 8.90 lb. $3999 ea 106 6640104 Right 0.810” 11.75” 8.10 lb. $7999 ea106 98506020 1.25” 11.75” 8.30 lb. 106 6640105 Left 0.810” 11.75” 8.10 lb. 3999 ea 106 6640108 Right 0.810” 12.19” 8.30 lb. 7999 ea 106 6640109 Left 0.810” 12.19” 8.30 lb. 7999 ea 106 6640121 Right 1.00” 11.75 10.00 lb. 7999 ea 106 6640122 Left 1.00” 11.75 10.00 lb. 7999 ea 106 6640106 Right 1.25” 11.75” 10.60 lb. 7999 ea 106 6640107 Left 1.25” 11.75” 10.60 lb. 7999 ea 106 6640110 Right 1.25” 12.19” 10.80 lb. 7999 ea 106 6640111 Left 1.25” 12.19” 10.80 lb. 7999 ea 7999 eaC | PILLARVANE FLAT•ROStrTenOgthRoSf 80 vane, G | PILLAR VANE weight of a 32 vane •••D37TRh2”, rI8vuLahtnLohelrEeeabDdoltRciOrclTe ORS•• 7”, 8 hole bolt circle Thru threadPART # THICK O.D. WEIGHT PRICE PART # THICK O.D. WEIGHT PRICE106 6640100 0.810” 11.75” 8.20 lb. $5499 ea 106 6640112 0.810” 11.75” 8.10 lb. $7999 ea106 6640102 0.810” 12.19” 8.40 lb. 106 6640116 0.810” 12.19” 8.30 lb.106 6640120 5499 ea 106 6640114 7999 ea106 6640101 1.00” 11.75” 10.09 lb. 5499 ea 106 6640118 1.25” 11.75” 10.60 lb. 7999 ea106 6640103 1.25” 11.75” 10.70 lb. 5499 ea 1.25” 12.19” 10.80 lb. 7999 ea 1.25” 12.19” 10.90 lb. 5499 eaD | ULTRALITE H | SUPERLITEVENTED ••RO7Th”, rT8uhOtohlrReeabSdolt circle•••RO37Th2”, rT8vuahOtnohelrReeabSdolt circle PART # THICK O.D. WEIGHT PRICEPART # THICK O.D. WEIGHT PRICE 835 1600495* 0.31” 12.00” 4.40 lb. $10599 ea835 1600471 0.810” 11.75” 8.00 lb. $3599 ea 835 1600525 0.35” 12.00” 5.00 lb.835 1600277 0.810” 12.19” 8.70 lb. 835 1600201 0.35” 11.40” 5.40 lb. 10599 ea835 1600276* 0.810” 12.19” 8.70 lb. 3799 ea 835 1609772** 0.35” 11.75” 4.10 lb. 7999 ea835 1600483 1.25” 11.75” 8.70 lb. 8199 ea 835 1609773** 0.35” 12.25” 4.50 lb. 8399 ea 3599 ea 8399 ea **Scalloped and drilled*7.62” bolt circle with ⁄ ” - 24 threads *7.62” bolt circle with ⁄ ” - 24 threads142 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Bolt-On Rotors HUBS & BRAKESE | STRAIGHT VANE A | DRILLED•••D3T7Rh2”, rI8vuLahtnLohelrEeeabDdoltRciOrclTe ORS ••SCT7h”,Ar8uhLtohLlreeOabdoPltEciDrcleROTORSPART # THICK O.D. WEIGHT PRICE106 98506120 1.25” 11.75” 7.90 lb. $3999 ea PART # THICK O.D. WEIGHT PRICE 940 31068 0.810” 11.75” 5.07 lb. $5999 ea 940 31062 0.810” 12.19” 5.56 lb. 940 31066 1.25” 11.75” 6.13 lb. 6499 ea 6499 eaF | LIGHTENED STRAIGHT•••V3T7Ah2”,rN8vuahtEnohelreDeabdRoltIcLirLclEe D ROTORSPART # THICK O.D. WEIGHT PRICE B | SCALLOPED835 1605863 0.810” 11.75” 7.20 lb. $6999 ea ••RO7Th”, rT8uhOtohlrReeabSdolt circle835 1605865 0.810” 12.19” 7.70 lb.835 1605864 1.25” 11.75” 8.20 lb. 6999 ea 4999 eaG | LIGHTENED PART # THICK O.D. WEIGHT PRICESTRAIGHT VANE 940 31065 0.810” 11.75” 5.58 lb. $4999 ea••SC7Th”,Ar8uhLtohLlreeOabdoPltEciDrcleROTORS 940 31060 0.810” 12.19” 6.13 lb. 940 31064 1.25” 11.75” 6.36 lb. 5499 ea 5499 eaPART # THICK O.D. WEIGHT PRICE ••• STEEL ROTOR ADAPTER835 1608135 0.810” 11.75” 5.20 lb. $8999 ea835 1608136 0.810” 12.19” 5.90 lb. Fits eight-bolt-on 7” center rotors835 1608343 1.25” 11.75” 5.80 lb. 8999 ea Mittler Bros 8999 ea GN hubs 910 48354 GN $4499 eaH | CURVED C | IMCA STEEL•VEAngNinEeeRredOtTo OwitRhstand extreme ••••••BRRIH5WSMp.ou8AeCutb3iognA”KrwhcsahsiltEpteaehjpasuerH.rsl75aoth”0nv2Aab”cetoldedbTwlitIa..iDcmthi.rec5tleeor,nemi4go1h⁄u2t”n, h5tionolgensh4o3⁄4l”eas;n3d.050o” no temperatures with the highest degree of resistance against distortion, warping, cracking, and wearPART # SIDE THICK O.D. WEIGHT PRICE 5” bolt circle patterns835 16013978 Right 0.99” 11.75” 7.10 lb. $7999 ea set; 3.06” diameter835 16013979 Left 0.99” 11.75” 7.10 lb. 7999 ea of center hole 910 31904 Speedway $2999 eaJ | GT 36 CURVED D | ALUMINUM BRAKE HAT••VASSupNietcaE-b3l7eRhfoOerahTviygOwhaRtellmcapsetirnagtusre racing to street use ••• Drilled with three wheel bolt patternsPART # SIDE THICK O.D. WEIGHT PRICE 5 on 41⁄2”, 5 on 43⁄4” and 5 on 5”835 16012285 Right 0.810” 11.75” 9.0 lb. $11999 ea 1⁄2” wheel stud hole835 16012286 Left 0.810” 11.75” 9.0 lb. 11999 eaPART # BOLT CIRCLE # OF HOLES ROTOR MOUNTING # OF HOLES HOLE BACK CENTER PRICE835 1700208 HOLE THREAD DIAMETER SPACING DIAMETER $8799 ea835 1700357 7.00” 8 5 multi- t835 1700259 7.00” 8 5⁄16” -18 5 multi- t .52 1.96” 3.06” 9199 ea835 1700317 7.00” 8 5⁄16” -18 5 multi- t .50 1.77” 3.06” 8799 ea835 1700764 7.00” 8 5⁄16” -18 5 multi- t .50 1.71” 3.06” 8799 ea 7.00” 8 5⁄16” -18 5 multi- t .50 1.59” 3.06” 8799 ea 5⁄16” -18 .50 1.41” 3.06” 143ORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com
HUBS & BRAKES Brake Pads A | SINGLE CALIPERS PRICE SPEEDWAY COMPOUND DESCRIPTION THICKNESS $899 ea 919 1566 156 Best for aluminum rotors 0.490 919 3385 Street performance 0.490 699 ea 338 DESCRIPTION PRICE ULTRA LITE COMPOUND Ceramic coated rotors THICKNESS $2699 ea 940 31017 Metallic Heat shield .065” for single pin caliper 0.440 1299 ea 940 31043 0.065 Width 2.00” B | F11, DYNAPRO AND SINGLE CALIPERS PRICE Width 2.00” AFCO COMPOUND DESCRIPTION THICKNESS $8999 4 pads 106 6654002 Best for aluminum rotors 106 6654011 0.630 8999 4 pads 106 6654021 C1 Medium to high temperature pad 7999 4 pads 106 6654012 C2 High temperature high grip THICKNESS 11999 4 pads 0.490 PRICE WILWOOD Titanium Titanium alloy or stainless alloy rotors 0.500 $7999 4 pads COMPOUND DESCRIPTION 0.500 2299 ea 835 15012242K BP-40 High temperature racing pad 0.500 5199 4 pads 835 8272 0.490 6099 4 pads CM High temperature racing pad 0.490 9599 4 pads 835 1509765K BP-20 0.500 8299 4 pads 835 9766 Street performance and racing pad 7299 4 pads Purple Best for aluminum rotors 835 15A10142K PolyMatrix A 835 15B9819K PolyMatrix B High temperature racing pad 835 9820 High temperature racing pad PolyMatrix E Street performance and racing pad C | F33, DYNALITE DOUBLE QUICK CHANGE CALIPERS AFCO COMPOUND DESCRIPTION THICKNESS PRICE 106 12511000 C1 Medium to high temperature pad 0.480 $7999 4 pads 106 12512000 C2 106 6655011 High temperature high grip 0.480 8999 4 pads 9999 4 pads 106 6655021 C1 Medium to high temperature pad 0.600 10999 4 pads 15999 4 pads 106 6655012 C2 High temperature high grip 0.600 7999 4 pads 14999 4 pads Titanium Titanium alloy or stainless steel rotor 0.600 14999 4 pads 106 12511002 C1 9999 4 pads 106 6652002 Medium to high temperature pad 0.630 14999 4 pads 15999 4 pads 106 6652012 32 Med temp wide tempaturer range 0.630 PRICE $6499 4 pads 33 Cold power wide tempaturer range 0.630 PRICE 106 12512002 C2 $899 ea 106 6652022 High temperature high grip 0.630 699 ea Width 4.00” 106 6656012 34 Cold power wide tempaturer range 0.630 PRICE $12199 4 pads Titanium Titanium alloy or stainless steel rotor 0.630 5499 4 pads HAWK COMPOUND DESCRIPTION THICKNESS 1099 ea 919 10010 DTC-30 Wide temperature range 0.480 10599 4 pads SPEEDWAY COMPOUND DESCRIPTION THICKNESS 8099 4 pads 919 1568 156 Low temperature street and performance 899 10699 4 pads 919 3387 WILWOOD 338 Medium temperature street and performance 0.490 COMPOUND DESCRIPTION THICKNESS 835 15012247K BP-40 Heavy braking and high temperatures 0.490 835 1509413K BP-20 835 3991 Street performance and racing pad 0.490 BP-10 Light to medium braking performance 0.490 835 15B3991K Polymatrix B 835 6096 High temperature racing pad 0.490 Polymatrix E Street performance and racing pad 0.490 835 15A5734K Polymatrix A High temperature racing pad 0.490 D | ULTRA LITE 200, 240, 250, 260 SERIES CALIPERS 240/250 - 2.75” wide ULTRA LITE COMPOUND DESCRIPTION THICKNESS PRICE 200/260 - 4.00” wide 940 31042 200 Series Ceramic coated rotors 0.630 $4499 ea 940 31057 200 Series Ceramic coated rotors 0.480 940 31012 200 Series Titanium heat shield 0.070 4499 ea 940 31010 240/250 Series Ceramic coated rotors 0.450 1499 ea 940 31039 240/250 Series Titanium heat shield 0.070 3999 ea 950 31031 260 Series Ceramic coated rotors 0.490 1499 ea 3999 ea144 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Brake Pads HUBS & BRAKESA | F22, NDL OR DYNALITE WITH BRIDGE BOLT CALIPERSAFCO COMPOUND DESCRIPTION THICKNESS PRICE106 6652002 32 Low grip racing pad 0.630 $14999 4 pads106 12511002 C1106 6652012 33 Medium to high temperature pad 0.630 7999 4 pads106 12512002 C2 14999 4 pads106 6652022 34 Cold power wide temperature range 0.630HAWK COMPOUND 9999 4 pads919 B237M Black High temperature high grip 0.630 14999 4 pads919 M237MT Black PRICE919 B237LT Blue 9012 Cold power wide temperature range 0.630 $6399 4 pads919 23710 DTC-30 DESCRIPTION THICKNESS919 23720 DTC-30 Medium torque and temperature racing pad 0.480 6399 4 padsULTRA LITE COMPOUND 7099 4 pads940 31036 Metallic Medium torque and temperature racing pad 0.625 8299 4 pads940 31037 Metallic 8299 4 pads940 31038 Medium to high torque and temperature racing pad 0.625 PRICEWILWOOD COMPOUND $3999 ea835 7264 PolyMatrix B Best for dirt track 0.625 3999 ea835 15014346K Metallic 1499 ea835 15B9836K PolyMatrix B Best for dirt track 0.480 PRICE835 7266 PolyMatrix E DESCRIPTION THICKNESS 13199 4 pads835 6098 PolyMatrix E Ceramic coated rotors 0.630 12999 4 pads835 8858 BP-10 12699 4 pads835 9136 BP-10 Ceramic coated rotors 0.485 9399 4 pads 9199 4 pads Titanium heat shield 4599 4 pads DESCRIPTION THICKNESS 4199 4 pads High temperature racing pad 0.630 High temperature racing pad 0.600 High temperature racing pad 0.490 Street performance and racing pad 0.600 Street performance and racing pad 0.490 Light to medium braking performance 0.600 Light to medium braking performance 0.490B | SUPERLITE OR ULTRA LITE 300 SERIES CALIPERSHAWK COMPOUND DESCRIPTION THICKNESS PRICE919 HB101M Black Medium torque and temperature racing pad 0.810 $9699 4 pads919 HB101L Blue MT4 13699 4 pads919 10110 DTC-30 Medium to high torque and temperature racing pad 0.810 12099 4 padsSPEEDWAY COMPOUND PRICE919 2153 338 Best for dirt track 0.790 $1299 eaULTRA LITE COMPOUND DESCRIPTION THICKNESS PRICE940 31030 Metallic Medium temperature street and performance 0.730 $4499 eaWILWOOD COMPOUND DESCRIPTION THICKNESS PRICE835 2392 Gator Ceramic coated rotors 0.780 $3199 ea835 3992 PolyMatrix B DESCRIPTION THICKNESS835 6100 PolyMatrix E Low to medium temperature high grip 0.800 4299 ea835 8856 BP-10 11799 4 pads High temperature racing pad 0.800 6599 4 pads Street performance and racing pad 0.800 Light to medium braking performance 0.800DYNALITE MEASUREMENTS DYNALITE WITH COTTER PIN / DL DYNALITE WITH BRIDGEBOLT / DLDYNALITE NARROW MOUNT DYNALITE SINGLE / DLS BEDDING IN PADS Proper bedding starts with the new pads being run through one complete heat cycle and then cooled before using them in race conditions. Best performance and overall results will come from bedding new pads on an already bedded or “seasoned” rotor. Used rotors must be at and smooth. New pads can be e ectively bedded to new rotors, if some care is taken at rst break-in.ORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 145
HUBS & BRAKES Brake Pads A | F88, SUPERLITE WITH BRIDGE BOLT THICKNESS PRICE AFCO COMPOUND DESCRIPTION 0.490 $14999 4 pads 106 6651011 C1 Medium to high temperature pad 106 6651012 THICKNESS 18999 4 pads 106 6651021 33 Cold power wide temperature range 0.800 15999 4 pads 18999 4 pads 106 6651022 C2 High temperature and grip THICKNESS PRICE 0.650 $12499 4 pads HAWK 34 Cold power wide temperature range 0.650 PRICE COMPOUND DESCRIPTION 0.650 $10499 4 pads 919 52110 DTC-30 Best for dirt track 0.800 WILWOOD COMPOUND DESCRIPTION 0.800 6599 4 pads 835 6707 Polymatrix E Street performance and racing pads 0.800 11399 4 pads 835 8855 14999 4 pads BP-10 Light to medium braking performance 10499 4 pads 835 15Q6828K Q 835 5939 Medium friction low abrasion 6599 4 pads 835 6084 Polymatrix B High temperature racing pads 835 8854 Polymatrix E Street performance and racing pads BP-10 Light to medium braking performance B | GM METRIC AFCO COMPOUND DESCRIPTION THICKNESS PRICE 106 6653002 C32 Low grip $13499 4 pads 106 12511154 C1 Medium to high temperature pad THICKNESS 106 6653012 33 Cold power wide temperature range 8999 4 pads 106 12512154 C2 High temperature and grip THICKNESS 13499 4 pads 106 6653022 34 Cold power wide temperature range THICKNESS 11999 4 pads HAWK COMPOUND DESCRIPTION 13499 4 pads 919 D154 HPS High friction with torque hot or cold 0.520 PRICE 919 D154P Plus Extremely high friction 0.520 $4699 4 pads 919 D154M Black Medium torque and temperature racing pad 0.520 919 119A DTC15 Medium torque and temperature racing pad 0.520 8699 4 pads 919 119W DTC30 Wide temperature range - best for dirt track 0.520 7299 4 pads SPEEDWAY COMPOUND DESCRIPTION 8599 4 pads 919 1562 156 Low temperature - easy on rotors 9499 4 pads WILWOOD COMPOUND DESCRIPTION PRICE 835 9422 BP-20 Street performance and racing pads $1599 2 pads 835 6103 Polymatrix E Medium friction PRICE 835 8936 BP-10 Light to medium braking performance $6899 4 pads 835 15A6219K Polymatrix A Cold power wide temperature range 9199 4 pads 835 15B3998K Polymatrix B High temperature racing pads 5299 4 pads 14399 4 pads 12999 4 pads A | GM STANDARD AFCO COMPOUND DESCRIPTION THICKNESS PRICE 106 12511052 C1 Medium to high temperature pad THICKNESS $9999 4 pads HAWK COMPOUND DESCRIPTION PRICE 919 D052 HPS High friction with torque hot or cold THICKNESS $5699 4 pads 919 D052P Plus Extremely high friction THICKNESS 919 D052M Black Medium torque and temperature racing pad 8899 4 pads 919 103A DTC-15 Medium torque and temperature racing pad 7299 4 pads 919 103W DTC-30 Wide temperature range - best for dirt track 9099 4 pads SPEEDWAY COMPOUND DESCRIPTION 9499 4 pads 919 1563 156 Low temperature street and performance PRICE WILWOOD COMPOUND DESCRIPTION $1599 2 pads 835 6102 Polymatrix E Medium friction PRICE 835 8939 BP-10 Light to medium braking performance 9199 4 pads 5299 4 pads HOW TO BED IN YOUR BRAKE PADSTo bed-in your brake pads, begin by applying the brakes at low speeds to assure proper system operation. On the race track or other safe location, make aseries of hard stops from moderate to slower speeds. Gradually increase the speed and the braking until the pads reach a hot racing temperature. If any brakepad fade is experienced during the bed-in, immediately begin the cool down process. Drive the car at slow to moderate speeds while the pads begin to cool,and be sure not to drag the brake pedal. Pit the car with minimal brake use and allow the brakes to nish cooling before subjecting them to race conditions.This procedure will minimize pad wear and maximize friction values over the broadest possible temperature band.146 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Calipers HUBS & BRAKES••••••E | STOCK GM CALIPER NEW ‘69-’77 mid- and full-size GM caliper 7⁄16”-20 inlet IMCA approved 3⁄8” 24” No core charge BLEEDER Fits 1” thick rotor 2.8” diameter piston910 31035 SIDE $3999 ea A | GM METRIC CALIPER • Based on popular GM Metric calipers with 51⁄2” mounting centersF | LIGHTWEIGHT • You have the choice of standard piston (21⁄2”) oversized (23⁄4”) or undersized (21⁄4”)•••GMN1L⁄8iog”thNCItPMwATCefAieLgmhaIptPapsletEreoienRvlleeadtlternative to • 10mm - 1.5” inlet 106 6635003 21⁄2” piston – RH (IMCA approved) $5499 ea 106 6635004 21⁄2” piston – LH (IMCA approved) 5499 ea ••• 2.812” diameter piston 106 72419001 7999 ea stock GM ‘69-’77 style caliper For use with 1.25” rotors 106 72419002 23⁄4” piston – RH (USMTS/UMP) 7999 ea Weighs just 7 lb. Will not work with stock caliper bolts 106 6630312 23⁄4” piston – LH (USMTS/UMP)• 106 72419005 L.W. 23⁄4” piston – LH or RH (USMTS/UMP) 8999 ea910 33700 $9599 ea 21⁄4” piston – RH (USMTS/UMP) 7999 eaG | GM IIIALUMINUM CALIPER’69 ’77 STYLE $13199 ea B | ‘78 AND UP GM METRIC CALIPER835 1205289 2.75” piston/1.25” rotor 13199 ea835 1205288 2.75” piston/.81” rotor 13199 ea ••• IMCA approved835 1205344 2.38” piston/1.25” rotor 13199 ea 2.38” piston835 1205343 2.38” piston/.81” rotor 7⁄16”-20 inlet‘78 NEWER STYLE $12499 ea835 1206427 2.38” piston/1.25” rotor 12499 ea 910 31045 SIDE New - caliper only $4299 ea835 1206426 2.38” piston/.81” rotor $2999 kit C | ALUMINUMH | BANJO BRAKE 2999 kit••FISITnecrTlvuiIdcNeessGtbwaonKjcoIa,Tlbipoeltrsand washers 3499 kit 3499 kit617 2930 7⁄16”-20 to AN 3 •MTEraTckRteIsCtedCaAndLpIrPovEenR617 2940 7⁄16”-20 to AN 4 to have less ex, better pedal feel, less fade,617 2950 10mm-1.50 to AN 3 and less pad taper than the competition617 2960 10mm-1.50 to AN 4 ••••• 2 or 2 3/8” bore Comes with standard bleederJ | BLEEDER OPTIONAL SPEED Quality control checked and pressure testedREPAIR KIT BLEEDER SHOWN 1/8”NPT inlet INSTALLED Fits left or right side835 2200063 Bleeder kit 1⁄8” NPT $299 kit835 2200627 Set of four 1299 set617 3954 1⁄4”-28 optional speed bleeder Used in conjunction with bleeder 1499 pr kit #835-220063 and #835-2200627 106 6630310 2” bore $10999 ea 106 6691310 Spacer for 2” piston 599 ea 106 6691311 Spacer for 23⁄8” piston 599 eaK | D154 R SINGLEPISTON FLOATER••••••CA1CAB2S⁄8t”lal”aauLlociiNmpnrkIPle2iPeanTr1sn⁄u2mEFso”mepsdoRmtiuiescztaeoneollntdenipsnitibngsrnotuleuoircstsenhtetiohsnrsetaodck height and o set D | ‘METRIC’ •••STBCSalhEemoeEodeseLperhfaCrynosdmiAcianelLlisetiIhtzPeearraeE2n”bdRoo5rth12⁄231”⁄40m”mboomurne-1sti.n5gwcheinchtearllows you to run these calipers on either side • Not IMCA approved835 12013899 2” piston bore $10399 ea 835 1208924 2.75” piston – Fits LH or RH $7999 ea835 12013900 21⁄2” piston bore 10399 ea 835 1209333 2” piston – Fits LH or RH 7999 eaORDER 7AM TO 10PM: 800.979.0122 SpeedwayMotors.com 147
HUBS & BRAKES Calipers E | FORGED NARROW •••DF13Yo.5⁄Nr””.8moA1ro01Lu”¾noItTr”in1pEg.i2sc5toe”nnrotetorsrsA | FORGED 835 12011575 $12999 eaALUMINUM 835 11572 .810” rotor – 13⁄8” piston 12999 ea••••••••••F11L3ISI1FEOnn⁄8eoxt30n”tt⁄a14ts%reee”ri-gsnerrB3ennpBBSlm⁄8eidaartil”elsaieRlleRcsckcbtadeoeesrArplrouttaihHeopifstksKioeyrseegetsrloarohbEabtnbvrbueisoedouiCtrddwgtwtepymAepitrabahabefsLnlsensoehsdeatIelaatlgPdptgsraredeleunasErscldtsyeoRtlsraehotsausatnndudorsadepgiiazsitn7o⁄1gn6”swrench 835 12011572 .810” rotor – 13⁄4” piston 14399 ea 835 12011576 .810” rotor – 13⁄4” piston (side inlet) 12999 ea106 6630420 33⁄4” mounts 835 11573 1.25” rotor – 13⁄8” piston 12999 ea 1.25” rotor – 13⁄4” pistonB | DYNA $12499 ea•••PRQ3In.u7Oc5irce”kaCmsEe-AoCdulLicnpltaIipnmPagpdEcinreRegnttaeeinr ecriency $14999 ea F | FORGED 12499 ea $9899 ea •••DF51Yo.2⁄Nr5”.”3oA8mr01Lo”¾,uIn.T8”t1piEn0isg”toocernn1t.2e5rs” rotors 12499 ea with less pedal travel 10199 ea 12499 ea835 1209689 1.75” piston – .380” rotor 835 1206808 .380” rotor – 13⁄8” piston 13899 ea835 1209690 1.380” piston – .380” rotor 835 1206818 .380” rotor – 13⁄4” piston 12499 ea 835 1206806 .810” rotor – 13⁄8” piston $899 kit 835 1206816 .810” rotor – 13⁄4” piston 899 kit 835 1206804 1.25” rotor – 13⁄8” piston 1199 ea 835 1206814 1.25” rotor – 13⁄4” piston 1199 ea WILWOOD REPLACEMENT PARTS 1199 ea 835 1302658 Seal kit – 13⁄8” piston 799 pk 835 1302946 Seal kit – 13⁄4” piston 835 2007518 13⁄8” Piston – DL/DP 835 2007531 13⁄4” Piston – SL/NDL 835 2001118 13⁄4” Piston – DLS/DL 835 1800056 Cotter pins – bag of 10C | DYNALITE G | FORGED•••SI3UTNw.s2e5oG”wsmtLiathoiEnu.l3enC8st”sActsehtnLeicteIeklPrr1o.E7to5Rr”spistons •••DSS3Yti.5drNo0en\"iAngmleeoLstutIancTntadlcEiep4neCbtrelieArneidLtssIccPlraesEws Rs S835 1204062 DL billet single $11599 ea 835 12011571 .38\" rotors $14399 ea835 12010188 Dynapro lightweight 9899 ea 835 12011572 .810\" rotor 14399 ea835 12010188N Dynapro lightweight nickel plated916 41030 Brake line guard 11399 ea 999 ea H | BILLET DYNAPRO • Narrow mount, 3.50” calipers made of billetD | DYNALITE SINGLE •• Available for 1.25”, .810” or .380” rotors•AFLloUatMingIbNillUet MalumCinAumLIcPaliEpeRr 1⁄8” NPT inlet835 1202498 .25\" rotor 835 1209729 1.38” piston – 1.25” rotor $15199 ea835 1203277 .38\" rotor 835 1209728 1.38” piston – .810” rotor 15199 ea $11199 ea 835 1209726 1.38” piston – .380” rotor 15199 ea 11199 ea 835 1209734 1.75” piston – .380” rotor 16499 ea148 SpeedwayMotors.com SOME PARTS NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON ANY POLLUTION CONTROLLED MOTOR VEHICLES
Search
Read the Text Version
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
- 285
- 286
- 287
- 288
- 289
- 290
- 291
- 292
- 293
- 294
- 295
- 296
- 297
- 298
- 299
- 300
- 301
- 302
- 303
- 304
- 305
- 306
- 307
- 308
- 309
- 310
- 311
- 312
- 313
- 314
- 315
- 316
- 317
- 318
- 319
- 320
- 321
- 322
- 323
- 324
- 325
- 326
- 327
- 328
- 329
- 330
- 331
- 332
- 333
- 334
- 335
- 336
- 337
- 338
- 339
- 340
- 341
- 342
- 343
- 344
- 345
- 346
- 347
- 348
- 349
- 350
- 351
- 352
- 353
- 354
- 355
- 356
- 357
- 358
- 359
- 360
- 361
- 362
- 363
- 364
- 365
- 366
- 367
- 368
- 369
- 370
- 371
- 372
- 373
- 374
- 375
- 376
- 377
- 378
- 379
- 380
- 381
- 382
- 383
- 384
- 385
- 386
- 387
- 388
- 389
- 390
- 391
- 392
- 393
- 394
- 395
- 396
- 397
- 398
- 399
- 400
- 401
- 402
- 403
- 404
- 405
- 406
- 407
- 408
- 409
- 410
- 411
- 412
- 413
- 414
- 415
- 416
- 417
- 418
- 419
- 420
- 421
- 422
- 423
- 424
