»MOTORPLATES SPRINT H | LEAD E | FRONT MOTORPLATE A | ALUMINUM REAR BALLAST BARS MOTORPLATES $8499 pr WITH BUSHINGS • Choose either 7” or 7.5” motor heights • Put the weight on your car 7999 ea • Shell milled for the ultimate in weight where you want it • Bushings allow chassis to flex and respond savings 14999 ea to changing track conditions 910-45003 13 lbs. each (2) 910-45002 25 lbs. 910-45001 50 lbs. 940-18004 Motorplate w/ bushing $6999 ea • Available for standard and raised rail car 940-901B Bushing w/washer 999 ea 940-36012 $22499 ea 940-36013 Raised rail 19999 ea Standard (shown) 940-36015 Raised rail 7.5 22499 ea 940-36016 Standard 7.5 22499 ea 945-36014 Steel raised rail 19999 ea 945-36015 Steel standard 19999 ea J | CHASSIS BALLAST • Nests within your frame and secures with five stainless steel U-Clamps • Clamps come in two sizes: 1.25” and 1.375” tube diameters • Lead can be easily trimmed to fit any model chassis • Standard rail is 45 lbs (RH or LH use), trimmed for Raised Rail is 37 lbs 1 946-17220 Chassis ballast $19999 ea F | J&J FRONT MOTORPLATE B | REAR MOTORPLATES 2 910-471-SIZE (clamps sold separately) 499 ea AND SHIMS • Relieved for dash Weight clamp • Brake line pass through • Shims fit between rear motorplate and chassis • Steel version easily adds weight 940-37021 Steel - short $15999 ea • Raises or lowers the front of the engine one 940-37112 Steel - RR - long 21999 ea degree depending on which direction you 940-37113 Steel - std. - long 21999 ea install them 940-37016 Alum. - std. - short 15999 ea 940-37015 Alum. - RR - long (shown) 16999 ea • Two-piece motorplate has three holes 940-37111 Alum. - std. - long 16999 ea that allow you to use your original front motorplate tabs 1 940-10104 Rear shims $2999 pr 940-37022 Alum. - RR - long - Ford 19999 ea 2 940-10101 Front motorplate 6399 pr 940-37023 Alum. - std. - long - Ford 21999 ea K | 25 LB - CLAMP ON 940-2255 Throttle stand 3499 ea LEAD BALLAST 191⁄2\" • Clamp-on design is formed of two halves which bolt together around 11⁄8\" to 15⁄8\" round tubing allowing easy installation and removal • Bolts included 910-45004 41⁄2\" x 51⁄2\" $7999 ea C | FRONT MOTORPLATE • Change engine angle with ease using a pre- drilled plate 546-185 Front motorplate (shown) $5999 ea 940-18005 Black front motorplate 6499 ea L | TRU-LITE TITANIUM BOLT - 9/16\" HEX HEAD 191⁄2\" • Greater tensile strength than Grade 8 bolts G | TWO-PIECE • 3 times the strength of aluminum • 42% lighter than steel FRONT MOTORPLATES D | J&J ALUMINUM FRONT 940-6068 11⁄2\" coarse thread 3⁄8\"-16 $699 ea • Choose bushing mounted for optimum MOTORPLATE 940-6126 2\" coarse thread 3⁄8\"-16 599 ea chassis flex 940-6094 21⁄2\" fine thread 3⁄8\"-24 699 ea • Integrated dry sump tank mount and an oil • Milled 3/8” aluminum 940-6095 21⁄2\" coarse thread 3⁄8\"-16 699 ea filter housing mount in the block off plates • Works with any chassis 940-6046 .875\" fine thread 3⁄8\"-24 • Set up for S/B Chevy 940-6045 1\" fine thread 3⁄8\"-24 $599 ea 1 940-18003 Bushing mounted plates, plain $9799 pr 599 ea 2 940-18001 STD plates 7999 pr 940-1037 $5999 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 49 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT BRAKE/THROTTLE PEDALS A | DELUXE D | ALUMINUM G | OUTLAW PEDAL BELLCRANK KIT THROTTLE PEDAL • Floor mounted • Kit includes: rod ends, set of aluminum rods • Increase your control and lessen fatigue with • Zero bind mounting and aluminum bellcranks this full length flat bottom throttle pedal location for throttle linkage • Specify Eagle, Maxim or J&J • Rigid feel while giving your • Lightweight foot a solid resting place 916-55019 $3499 ea 910-55325-MODEL Kit - silver (shown) $6999 kit 910-55320 Kit - purple 6999 kit • Dual mounting position eliminates 910-55300 1999 ea twist or deflection 910-55301 Bellcrank 1999 set Bellcrank rods 799 ea 117-0700 Female rod end B | ALUMINUM 945-17302 $6999 ea BELLCRANKS W/ BEARING CENTER 910-55300 $1999 ea 910-553001 Purple 2199 ea Black E | STANDARD THROTTLE PEDAL H | TITANIUM THROTTLE PEDAL • Firewall mount • Positive throttle response • 2 throttle pick-up points • Lightweight aluminum 940-55011 $9799 ea C | ALUMINUM 916-55015 $3999 ea $899 ea THROTTLE LINKAGES F | ALUMINUM 999 ea J | CHROMOLY THROTTLE LINKAGE THROTTLE PEDAL • Put anywhere on the injector shaft without having to take the injector apart 940-55000 • Choose between 5/16\" or 3/8\" shaft 1 910-18400-SIZE Standard $999 ea 940-55301-LENGTH Black $5999 ea 2 910-18410-SIZE Lite 1499 ea 940-55301-LENGTH Helix is a chassis CHASSIS ONLY From $219999 ea created through CHASSIS & BODY From 325499 ea shared expertise and unique engineering. Inputs from EMi and Speedway Motors has delivered a versatile sprint car chassis design that incorporates traditional race proven specifications with modern day options. Geared for all classes of competition, the Helix can be outfitted with your custom requests. 50 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»BRAKE/THROTTLE PEDALS/STEERING SPRINT D | LINKAGE ROD ENDS A | PRO GRIP AND STANDARD GRIP FLAT K | JET NUT 40-PIECE KIT 175-0100 RH male (shown) $399 ea ALUMINUM STEERING 175-0300 LH male 399 ea WHEELS • Built in washers and reduced hex heads 175-0200 RH female (shown) 399 ea • Hundreds of uses on your sprint car 175-0400 LH female 399 ea • Features 3 spoke design • Each kit has ten each of 10-32; 1/4\", 5/16\", 3/8\" 117-0700 RH aluminum female 799 ea • Both 1/4” and 5/16” bolt mounting holes • Includes carrying case 117-0800 RH aluminum male 799 ea • Finger nubs are spaced 1” apart 150-011 799 ea • Pro grip wheel has a big 1.25” rim 940-04013 40-piece kit $3499 ea 150-012 FK RH aluminum female 799 ea • Standard grip wheel has smaller .875” rim 940-04100 10 pack - 10-32 499 ea FK RH aluminum male 940-04105 10 pack - 1⁄4 -28 599 ea 940-04110 10 pack - 5⁄16-24 899 ea E | THROTTLE CABLE 910-32721 13\" Standard grip flat $4999 ea 940-4017 10 pack - 3⁄8-24 999 ea 910-32722 13\" Pro grip flat 4999 ea • 10-32 male ends 910-32725 15\" Standard flat 4999 ea L | TI THROTTLE • 48\" long $5999 ea 910-32726 15\" Standard 3\" dish 4999 ea 910-55010 Cable 399 ea 910-32727 15\" Pro grip flat 4999 ea 175-0200 Female rod ends 910-72412 Elite nose pad 2199 ea 457-13600 Steering wheel tape 899 ea HARDWARE 940-6057 940-6056 1⁄4\"-28 x 1.500\" $499 ea F | SPLINED 940-6093 1⁄4\"-28 x 1.750\" 499 ea 5⁄16\"-24 x 1.250\" 499 ea QUICK RELEASES 910-32896 New style KSE 11⁄4\"-19-spline 11999 ea 940-4505 51⁄6\"-18\"x.500\"Tisteeringwheelbolt 299 ea 940-4506 Ti steering wheel bolt kit 599 kit M | ALUMINUM G | TITANIUM B | FLAT THROTTLE STAND STEERING WHEEL STEERING BOLT KIT WHEELS • Attaches to rear motorplate with 5/16\" bolts • Eliminates throttle hang-ups • (3) 5/16”-18 x .500” Ti bolts • Aluminum structure • Hole pattern: 3 + 3 holes (fits all 940-2255 $3499 ea 940-4506 $599 kit 3 bolts quick release) • Solid spokes • 15 inch diameter H | STEERING WHEEL 1 530-11501 15\" flat steering wheel $12899 ea SPACERS 530-11601 16\" flat steering wheel 12899 ea 530-11701 17\" flat steering wheel 12899 ea 960-13700-.5 1⁄2\" $2499 ea 1w5h\" espelri-nBtlsatcekerin 22499 ea 960-13700-1 1\" 2499 ea 2 530-11521 960-13700-1.5 11⁄2\" 2699 ea 960-13700-2 2\" 2899 ea N | BRAKE PEDALS C | ALUMINUM STEERING WHEELS BILLET PEDALS MOUNT M/C PRICE J | HEEL FLOORBOARD RISERS LOW MOUNT • Dished wheel with drilled grip POINT • Dish depth: 21⁄2\" 1 940-3013007 Pedal 14.5\" 2.25\" $6999 ea PLASTIC • Grip diameter: 11/4\" 940-30138 Brake spacer 399 ea 910-55002 21⁄4\" rise $1199 ea • 3 Mounting holes 5/16\" on a 1-3/4\" bolt circle 946-13905 Push rod spacer 299 ea 910-55001 11⁄8\" rise 1399 ea (hole distance 11/2\" center-to-center) ALUMINUM CHROMOLY PEDAL 14\" 2.25\" $4999 ea 910-55108 11⁄4\" tall $1999 ea 475-56866 15\" drilled 8999 ea 2 940-55027 NON-SKID TAPE $899 ea 475-56867 aluminum wheel - Plain 8999 ea STEEL PEDAL 910-80710 Non-skid tape 15\" drilled 3 940-45012 14.5\" 2.25\" $5999 ea aluminum wheel - Black SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 51 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT KSE RACING PRODUCTS B | POWER E | ALUMINUM HALF STEERING PUMP BOX MOUNTS • 1.4 lb. lighter • Gen 2 mount is necessary for use of new half • 25% more efficient than previous design boxes • AN 10 inlet 910-32915 Pump $61099 ea 910-37049 KSE Black Series $5999 ea 910-32941 Rebuild kit 3399 ea C | GEN 2 SUPPLY HOSE • Allows maximum flexibility for connecting the pump and gear within a tight area F | STEERING GEAR MOUNTS • Inner material prevents collapsing A | GEN 2 HALF BOX and distortion by tight bends or • Billet 6061 aluminum, plain or black anodize STEERING UNITS high suction 1 940-1441 Black anodize $2499 ea 2 546-188 Plain aluminum 1999 ea • Built-in reservoir, eliminating turbulence, 940-1891 $6499 ea 3 940-1430 Black anodize 2499 ea aeration and additional cooling 945-17500 45o-8 O-Ring to 90o- 8 9499 ea 4 546-200 Plain 2499 ea 5 940-1440 Black anodize 2499 ea • Easy fill 2” diameter cap is vented and built-in dipstick D | STEERING GEAR G | HALF PRESSURE LINES STEERING • More positive feel • Improved durability, less weight, simplified • Lightweight stainless steel braided high flow line plumbing • Eliminates binding 940-1894 14\" steel braided $3899 ea MOUNT TABS • Now available in black 940-1897 • Includes quick release hub (except Black 940-1893 • Use these tabs to adapt your chassis to a 940-1892 Series version) 940-1898 1 910-324943 Black Series $213599 ea 945-17501 18\" steel braided 4099 ea 2 910-324941 16\" output 207599 ea 14\" Kevlar 4299 ea 16\" output 207599 ea 22\" steel braided 4299 ea Gen 2 or other short style steering gear units 910-324942 18\" output 799 ea 22\" black high • 5/16\" bolt holes 940-32946 Wing valve port 5999 ea pressure rubber 3499 ea 940-2050 fittings AN 3 to AN 4 1 916-37047 Bottom tab $399 ea Knee protector 12” Kevlar w/ 9799 ea 2 916-37046 Top tab 399 ea Port Fittings 3 916-37048 Long tab 499 ea 52 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»STEERING SPRINT F | RESERVOIR TANK A | DUAL FILTER • Aluminum , 24 oz capacity POWER STEERING • 6\" inlet, 1⁄2\" NPT outlet RESERVOIR TANK 910-32878 Black alum. res dash mount $7499 ea • Removeable dual stainless screen 910-32877 6499 ea filter elements Firewall mount • Inegral firewall mounting system • Features internal filter, vented cap $16399 ea and AN 6 inlet/AN 10 outlet 910-32862 G | POWER STEERING B | FC300 HOSE PUMP ADAPTERS & FITTINGS • 5/8\" thick • Aeroquip FC 300 spec for power steering line 546-189 Speedway purple $2999 ea 546-190 Speedway black (shown) 4499 ea 940-10069 Hank's w/dirt shield 4499 ea H | STEERING $1299 ea PRESSURE LINE AN 6 hose $2399 ft GEAR FITTING 106-FC3000-3 AN 6 straight end 799 ea 106-1302 AN 6 45° end • AN 6 with 1/8\" NPT port fitting for tying in 106-1386 AN 6 90° end 1499 ea wing slider valve inline or off steering gear 106-1389 1499 ea INLET LINE AN 10 hose $1099 ft 617-7034 106-FC301 AN 10 45º end 2799 ea 106-1388 AN 10 90º end 2399 ea J | POWER STEERING 106-1390 FLUIDS -1 QUART • Compatible with all racing power steering systems 910-1086 KSE Elixer (shown) $1599 ea C | DRIVE SPUDS $2699 ea 910-44010 LE 1499 ea 2999 ea 484-104421 Lucas 799 ea 624-S202 Speedway 1\" long shoulder 1799 ea 607-10006 Red Line 1199 ea 624-S202L Speedway 1.5\" long shoulder 1599 ea 466-132001 KRC 1399 ea 101-9340005 ARP 1\" long shoulder 101-9340006 ARP 1.5\" long shoulder INTEGRATED ROD END SPACERS K | KNEE D | PITMAN ARMS PROTECTORS • Integrated rod end spacer 1 940-2050 Half box protector $5999 ea • Tapered design for increased spline 2 940-2000 Speedway carbon fiber 9499 ea 3 392-5081 5999 ea engagement 4 940-20501 Speedway aluminum 8099 ea 940-37019 Straight $5899 ea Full Knee Pad Protector 940-37020 Angled (shown) 4499 ea 1\" L | CAM SEALS E | PITMAN ARMS 93⁄4\" 103⁄4\" 624-S203 Stock Chevy – 2.105\" $1699 ea • 10° angled offset 940-14002 W/roller bearing cam 2499 ea Increased gear mating surface 3⁄4\" 2.253\" O.D. 624-S209 Dart Little M block – 2299 ea • Maximizes spline engagement on gear 53 940-14003 2.385\" O.D. 899 ea • Includes pinch bolt 940-14004 Replacement seal 50 mm Cam seal 2.3\" O.D. 2299 ea 910-32045-BLK Black - tapered (shown) $3999 ea 815-C00105 12\" w/ 10° offset 4299 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT FRONT AXLES INCLUDES ROTOR AND CALIPER A | 21⁄2\" FRONT AXLE KITS G | CHOKE STYLE AXLE TETHER • Now available in black • Meets SFI 55.1 specifications • Kits contain 21/2” M&W axle, steel kingpins, aluminum spindles with • Newest addition in Sprint Car racing safety components • Available in 86\", 87\" and 88\" wheel base lengths steel snouts, aluminum steering arms, Winters direct mount hubs, LF • Will need 2 per car brake bracket, LF aluminum brake rotor, rotor bolts, LF two-piston caliper, brake pads, steel tie rod, steel rod ends, aluminum jam nuts, 940-10223 Choke style axle tether (2 per car) $9899 ea Grade 8 bolt and nut kit, requires assembly 940-10355-SIZE King pin axle tether restraint (1 per car) 23999 ea $21999 pr 940-35500 50\" $87999 kit Professional Seat Systems 19999 pr 940-35502 52\" 87999 kit $10999 ea 940-35503 50\" - black 87999 kit 9699 ea 23999 ea B | 21⁄2\" FRONT AXLE KIT H | FRONT AXLE TETHER • All new front axle kit from Eagle Motorsports • Required by Knoxville and the WoO • Kit includes 50½” plain finished axle, two-tone Eagle steering arms, • Billet aluminum bracket clamps to axle • Cover nylon cap to attach to the frame Winters aluminum spindles with steel snouts, 5.5” kingpins, thrust • For 2¼”, 23/8” or 2½” axles bearings, chrome powder coat 4130 chromoly tie rod, FK steel rod • Complete with all hardware ends, jam nuts, carbon fiber brake line guard, Winters black aluminum • Sold in pairs front hubs, Wilwood LF brake kit and all necessary hardware • Assembly required 202-4922-SIZE Axle tether 202-49241-SIZE Spare axle brackets 940-357 $99999 kit J | RACING AXLE TETHER SYSTEM C | FRONT AXLES • Required by Knoxville and the WoO in 2014 • Newly re-designed, your choice of 4130 chromoly sprint axles • Amick tethers meet that requirement • 21/2\" axle has .095\" wall tubing, 21/4\" axle has .120\" wall tubing • Must use 2 radius rod tethers that are the correct • Available with the standard 10° or 8°-12° kingpin inclination • 50\" built with 1/2\" LH offset, 52\" built with 11/2\" RH offset length 940-10222-size and 1 Kingpin tether that is the correct length 940-10355-size 916-350-50 21⁄4\" axle 10° both $15999 ea 940-10222-SIZE Bolt on radius rod tether 916-352-WIDTH 21⁄4\" axle, 8°/12° Starting at 17999 ea 940-10221-SIZE Choke style radius rod tether 916-355-WIDTH 21⁄2\" axle, 8°/12° 940-10355-SIZE Axle tether 917-357-WIDTH 21⁄2\" axle, 8°/12° - black 17999 ea 17999 ea D | ADJUSTABLE FRONT AXLE K | SPRINT AXLE REAMER $12499 ea • 21/2\" with 9°/11° kingpins inclination, in 50\" and 53\" lengths • Now for .859\" kingpins • Plain finish • 11/2\" long pilot cobalt steel for extra-long life • Optimized caster/camber splits for precise balance • Reams to .860\", 3/4\" O.D. 940-860 945-359 Axle $23499 ea 946-17400 Adjustable shock mount spacer 299 ea E | J&J 50\" FRONT AXLE $23999 ea L | AXLE TETHER $12599 ea $21999 ea SYSTEM • 50\" x 23/8\" with 8°/12° kingpins inclination • Plain finish • Comes with one axle king pin to king pin tether 940-1029 and 2 bolt on style radius rod tethers F | FRONT AXLES • Works with 50\" axles • (2) Tethers 54\" • 10/12 degree camber, 2 degree caster split • (2) Kingpin Stud Kits • 50\" length , 2.5\" Tube O.D. • Wing Sprint Car Tethers 54'' end-to-end 945-358 • 27'' Radius Rod Tethers & Heim Kit • Check rules to be sure it is approved 940-5427 54 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»STEERING/FRONT END SPRINT A | ALUMINUM D-MOUNT FRONT HUBS H | REM LOW E | ULTRA HUB FRICTION BEARING • Includes bearings, seals, wheel studs, nuts, • Aluminum, for dirt use only LH hub w/brake mount, RH hub without • Fits all sprint car front hubs using brake mount and billet threaded hubcaps lightweight spindles and all midget hubs 815-80883-SIDE Hub (shown) $29699 ea Replacement 1099 ea 802-3981 Front hub - black (shown) $25499 pr • REM finished for less drag 912-T15120 bearing 899 ea 802-3980 Front hub - gold 24999 pr 912-S405685 Replacement seal 802-39802 Front Hubs - gold w/dual mount 25999 pr 940-13634 Bearing and race $6499 ea 802-39803 RF Hub - gold 10499 ea 546-013607 Adj. bearing spacer 4999 ea 802-39804 LF Hub - gold w/rotor mount 10999 ea 802-39813 RF hub - black 10499 ea 802-39814 LF hub - black w/mount 10999 ea 802-3749 Replacement hub cap - gold 1799 ea J | FRONT HUB F | 13/15 802-3750 Replacement hub cap - black 1999 ea HARDWARE 802-8419 Hubcap O-ring MAGNUM HUBS 912-T15120 Replacement bearing 299 ea SMOOTH AND THREADED FRONT DRIVE PINS 802-72910 Replacement seal 1099 ea 1 910-03996 Threaded $799 ea • 100% CNC machined aluminum, black or 940-8088 Wheel nuts, bag of 10 910-03900 Smooth 499 ea gold anodize 802-3748 Shim for double lip seal 899 ea 919-1657 Alum. nuts 5⁄8\" coarse 799 ea 802-72911 Double lip seal for oil hubs 499 bag 910-05906 Nylock, 1⁄2\" nut, 6 pack 399 pk • Accommodates a straight shaft spindle 399 ea • Left side hub includes rotor mount 899 ea STANDARD HUB PARTS BLACK 815-80881-SIDE Hub $26599 ea 2 910-58213 Pressure plate $6499 ea 815-110323 Replacement hub cap 4199 ea 910-58724 Nut RH 25⁄8\" 2199 ea 910-58723 Nut LH 25⁄8\" 2199 ea GOLD 815-8088-SIDE Hub $26599 ea 3 SIX PIN SPACERS 815-C0323 Replacement hub cap 3999 ea 916-58220-THICKNESS 1⁄8\", 1⁄4\", 3⁄8\", 1⁄2\" $999 ea PARTS 912-T15120 Replacement bearing $1099 ea 912-S40568S Replacement seal 899 ea 940-8088 Wheel nuts, bag of 10 499 bag B | TRACKSTAR FRONT HUBS K | SPINDLE & HUB • Forged 2024-T3 aluminum WRENCHES • Reduces flywheel and rotating weight • Includes screw on caps, wheel studs, • Durable stainless steel construction • Sized for most popular combinations bearing and races and seals G | FRONT HUB 802-39805 Trackstar hubs (2) $35999 set BEARING SPACER 1 940-35016 17⁄8\" hex heads, $2199 ea star end fits spindle nut 1999 ea • Increases wheel spin 2 940-35018 17⁄8\" and 13⁄8\" hex ends • Allows the car to roll more freely, putting more hp to the track and decreasing corner drag C | BLACK • Once adjusted for your hub, simply lock WIDOW HUBS L | LF- 4 HUB LUBE down the spindle nut for a perfect set of freewheeling bearings • Forged for increased strength and • Pair with REM low drag race set and TFE low machined for substantial weight savings drag seal for the most wheel spin possible • Threaded dust cap with black anodize finish 910-31028 Single 4 oz bottle $399 ea 546-013607 Adj. bearing spacer $4999 ea 910-31030 4 bottles 1499 set 546-025605 TFE low drag seal 1499 ea 910-31031 12 bottle case 4599 set 940-13634 Bearing and race 6499 ea 940-1968 RF hub $19999 ea 940-1969 LF hub 19999 ea 912-T15120 Replacement bearing 1099 ea 912-S405685 Seal-sprint hubs, Ford spindle 899 ea SPEEDWAY AXLES ARE ALL REAMED FOR CORRECT KINGPIN FIT! SQUARING THE FRONT AXLE 4. Caster is now set by placing an angle finder on top of D | ULTRA WHEEL HUB the RF steering arm. Adjust the radius rods to achieve an 1. Having already squared the rear axle first, place the front angle of +10°. Now ensure arm length is still at the desired • Aluminum construction axle on 4\" blocks. Be sure to use a 1\" shorter block on left measurement. • Anodized finish side for raised rail cars. • 15.00\" outside diameter 2. Adjust the sway bar so the shock brackets are equal 5. Set the lead by measuring the distance between the • 4.50 pounds distances from the bottom frame rails. This ensures proper front and rear axles on the right side of the car, then set the • Hardware included offset. left side with this measurement minus the amount of lead 3. Set the front arm length by adjusting the radius rods desired. This is generally 1⁄4\". 815-808831 $29699 ea until the desired distance is obtained from the center 6. Measuring from the inside of the wheels, set 1⁄8\" of tow of the RF torsion tube to the center of the axle. This is out by adjusting the tie rod. generally 131⁄2\" with the tape measure running parallel to the bottom frame rail. 7. Finally, set the axle on your race height blocks and install the stops. SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 55 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT SPINDLES/STEERING ARMS F | ALUMINUM SPACER KIT • Use these 1/2\" I.D. spacers to allow rod ends to swivel • Great for tie rod, drag link, rear shocks and pitman arm • Four lengths included: (8) 1/4”, (4) 1/2”, (2) 3/4” and (2) 1”, 16-pieces • Now available in black A | KINGPINS HARDWARE Winters-aluminum cap $299 ea 940-04016 Plain $2199 ea 802-110902A 940-04017 Black 2599 ea 940-1322 KINGPINS 940-2045 Speedway-cap 599 ea 1 940-35014 Winters steel, 5.6\" long $2199 ea 910-32361 for chromoly kingpins 2 546-01440 Winters Titanium 5.6\" 7499 ea 940-32350 940-2059 DMI - Titanium, 5.6 8999 ea DMI - black aluminum cap 799 ea G | TORSIONAL Bushing 399 ea 3 940-1321 Speedway- chromoly 5.5\" 1999 ea 699 bag Shims 7/bag BEARING KIT • Fits between spindle and axle to eliminate binding 910-32352 Speedway bearing kit (shown) $999 ea 940-32350 Shims 7/bag 699 bg 940-02003 DMI bearing kit 2599 kt B | ALUMINUM D | STEERING ARMS H | SPINDLE NUTS $2999 ea SPINDLES 2999 ea 802-2377 Winters aluminum nut 1599 ea • 31⁄4\" arm mount 802-23771 Winters steel nut 3999 pr 940-35013 Ultra-Lite 546-0142KLT MPD - fine 940-37013 Eagle - black, RH std $2399 ea 940-37014 Eagle - black, LF combo 4499 ea 802-7075 Alum/steel snout $11499 ea 815-C00030- Aluminum/steel snout - 14499 ea SPECIFY 802-7076 black (shown) 17999 ea M&W - plain, RH standard 3999 ea 19999 ea 802-7075T Aluminum/Ti snout - plain 815-C00040- M&W - plain, LH combo 5999 ea J | SPINDLE NUT WRENCH SPECIFY 802-7077 Aluminum/Ti snout - black 940-102- 802-3621 $2099 ea SPECIFY 3199 ea M&W - black, RH standard 940-101- M&W - black, LH combo 5299 ea SPECIFY 802-3651 Winters - plain RH 3.25 2399 ea 802-3652 Winters - plain LH combo 3.25 3999 ea K | LOW PROFILE GREASE ZERKS $799 bag • Great for spindles and other areas 799 ea needed added clearance 5/16\" hex head stainless steel with 1/4\"-28 UNF thread 910-10595 Zerks 910-1187 Grease needle C | FORGED .220\" L | FINE THREAD ALUMINUM TITANIUM BOLTS SPINDLE E | CONE SPACERS 940-5817 1⁄2\"-20 x 1.750\"- RF steering $899 ea • Comparable to 2024 billet • Obtaining maximum clearance on rod ends arm to spindle • Features 31/4” bolt spacing • 1\" O.D. aluminum or steel 940-5820 1⁄2\"-20 x 2.000\", tie rod to 999 ea • Straight snout • 8 per pack 940-5822 steering arm 999 ea • Locknut and washer included 940-5825 1⁄2\"-20 x 2.250\", pitman arm 1099 ea 940-7075 $11499 ea 546-4108 1⁄2\" hole aluminum $799 pk 1⁄2\"-20 x 2.500\" 546-4107 1⁄2\" hole steel 799 pk 546-4109 5⁄8\" hole aluminum 799 pk 56 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»NON-WING SPRINT 53\" 8\" 311⁄2\" 12\" 28\" 11\" A | NON-WING FRONT AXLES • Hand crafted construction of 21/4\" diameter .120\" all of the finest .4130 material for durability and longevity H | LONG 916-352-52 M&W 52\" $17999 ea RADIUS ROD MOUNTS 916-352-53 M&W 53\" with sway bar studs (shown) 17999 ea 945-359-53 Eagle 53\" 23499 ea • Mounts to chassis at motorplate • Lines up front of long radius rod with torque ball • 3 adjustment holes on RH side, 5 on LH • Sold in pairs, two-tone aluminum 940-4930 $3499 pr J | ANGLED AND S-BEND E | SWAY BAR TORSION ARMS ARMS & STOP • Angled RF torsion arms are 17\" • 2024 billet aluminum • Splines broached at a 10° angle to the arm • Fully radiused • Black anodized to get contact area further out on the axle • Hardware included 1 940-1165 Stop 910-55410 2\" offset $5499 ea 2 940-1175 Splined RF arm $4999 ea 3 940-1185 LF arm 7999 ea 7999 ea B | STAINLESS 815-C00085 17\" 10° RF arm $4999 ea STEEL BATTLE BARS • Fits on any chassis • Excellent for wheel-to-wheel combat 910-55400 Curved LF arm $5499 ea 910-73080 RH $11999 ea 910-73081 LH - standard rail 11999 ea 910-73082 LH - raised rail 11999 ea F | SWAY BAR LINK • Swedged 4\" aluminum rod 940-38000 S-bend LF arm $7999 ea 910-351-4 Link $899 ea 175-0313 LH 3⁄8\" steel rod end 599 ea 175-0113 RH 3⁄8\" steel rod end 599 ea 315-9599 LH aluminum jam nut 499 6 /pk 315-9598 RH aluminum jam nut 499 6 /pk C | STAINLESS STEEL BASKET REAR BUMPER 910-73078 $9499 ea K | NON-WING D | BILLET TANK BIRDCAGES MOUNT CLAMPS G | CARBON FIBER VISORS • Don't fight hole placement of brackets • Utilized by top USAC teams when changing tanks • Billet aluminum construction 1 940-1015 Speedway - Standard visor $8999 ea • Close ratio pick-up points to optimize rear 2 940-1010 Speedway - aero front visor 9799 ea arm angle 946-14225 Front visor, carbon fiber 11999 ea • Bearings not included 946-14229 LH side visor, carbon fiber 12999 ea 946-14228 RH side visor, carbon fiber 12999 ea 940-4018 LR birdcage $19999 ea • Use these clamps to position the tank in the 940-4019 20999 ea correct spot with ease RR birdcage 3499 ea • Clamps to 13/8\" diameter tube 940-59142RS28 28mm angular 940-1005 $3999 pr contact bearing SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 57 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT SWEDGED TUBES A | RADIUS G | ALUMINUM THREADED ROD TOOLS SWEDGED TUBES 940-37119 • 5/8”-18, 11/8” O.D., RH and LH threads $3999 pr 910-355-LENGTH 13.5\"-22.5\" $1799 ea 910-355-LENGTH 23\" - 50\" 2199 ea 910-3551-LENGTH Black tubes 1999 ea B | STEEL SWEDGED H | ALUMINUM SWEDGED N | BLACK RADIUS ROD KIT RADIUS RODS RADIUS RODS • Kit includes 5/8” NF thread, 1” O.D. black • Steel or chromoly • 5/8\" NF thread, 1\" O.D., RH and LH threads aluminum swedged tubes • 4\"-24\" lengths, 5/8\" RH and LH threads • Yellow zinc finish • Choice of (3) 22.5”, 24”, 23.5”, 18.5” lengths 910-34258-LENGTH Steel-7⁄8\" O.D. Starting at $999 ea • Includes black FK aluminum rod ends and 910-34558-LENGTH Chromoly-1”O.D. Starting at 1899 ea plain aluminum jam nuts 910-354-LENGTH 131⁄2\" - 19\" $1099 ea 940-2004 $25499 ea 910-354-LENGTH 20\" - 24\" 1199 ea 910-354-LENGTH 27\" - 31\" 1299 ea P | JAM NUTS ALUMINUM - BLACK C | ALUMINUM BLACK J | STEEL RADIUS RODS 315-9494 10 - 32 RH/LH $899 12/bag ANODIZE SWEDGED 315-9495 899 12/bag RADIUS RODS • Available in 21”, 21.5”, 22”, 22.5”, 23” and 315-9496 1⁄4\" - 28 RH/LH 999 12/bag 23.5” lengths, 5/8\" RH and LH threads • 5/8\" NF thread 315-9497 5⁄16\" - 24 RH/LH 1099 12/bag • 1\" O.D., RH and LH threads 1199 12/bag 940-5800-LENGTH $3499 ea 315-9498 3⁄8\" - 24 RH/LH 1299 12/bag 910-3541-LENGTH 17\" - 24.5\" 910-3541-LENGTH 27\" - 31\" 315-9499 1⁄2\" - 20 RH/LH 125 ea $1399 ea 117-9999 5⁄8\" - 18 RH/LH 1599 ea ALUMINUM - PLAIN 5⁄8\" - 18 RH/LH K | SAFETY STRAP FOR 315-9592 10 - 32 RH $499 6 pk DRAG LINK 315-9593 10 - 32 LH 499 6 pk 315-9594 499 6 pk D | 4130 • Available in red, blue or black 315-9595 1⁄4\" - 28 RH 499 6 pk CHROMOLY 1⁄4\" - 28 LH 499 6 pk TIE ROD AND DRAGS 910-79-COLOR Safety Strap (shown) $1099 ea 315-9596 499 6 pk 916-37082 Speedway safety strap locator 199 ea 315-9597 5⁄16\" - 24 RH 499 6 pk • Available in plain, chrome powder coat or 940-135 299 ea 315-9598 5⁄16\" - 24 LH 499 6 pk black, 5/8\" RH and LH threads 199 Eagle safety strap locator 315-9599 3⁄8\" - 24 RH 199 ea 3⁄8\" - 24 LH ea 315-9603 910-353-LENGTH Plain $3599 ea 315-9604 5⁄8\" - 18 RH 5⁄8\" - 18 LH 910-353-LENGTH Chrome powder coat 4299 ea ALUMINUM - 5/16\" O.D. HEX 910-353-LENGTH Black 4299 ea 315-9663 $199 ea L | ANTI-SEIZE STEEL - PLAIN 175-6041-THREAD 1⁄4\" $199 6 pk 1 324-025 Copper graphite anti-seize 4oz $899 ea 175-6043-THREAD 3⁄8\" 199 6 pk 2 910-16011 Klever bolt dip & brush 16 oz can 2599 ea 175-6044-THREAD 7⁄16\" 199 6 pk E | STEEL 299 6 pk HEX TUBE 175-6045-THREAD 1⁄2\" 399 6 pk 175-6046-THREAD 5⁄8\" 399 6 pk • 11/8\" diameter tube with a 175-6047-THREAD 3⁄4\" 3/4\" hex end LH thread side only STEEL - 3/4\" O.D. HEX 175-6048-THREAD $399 6 pk • Available in plain or black • 5/8\" RH and LH threads $3599 ea 946-17805-SPECIFY F | RADIUS ROD M | PANHARD CLAMPS FOR QUICK REFERENCE BUILDING TOOL WHEN NEEDING TO ADJUST • Machined in the USA from 7075-T6 billet IN A HURRY – PLACE RADIUS • Fits 1/2\", 5/8\" and 3/4\" rod ends aluminum RODS ON THE CAR SO THAT • 32\" long LH THREADS ARE TO YOUR • Helps to quickly adjust roll center LEFT HAND AND RH THREADS 300-8005 • Beautiful two-tone black anodize finish ARE TO YOUR RIGHT HAND. $3499 ea 940-35027 13⁄8\" $2999 ea 950-35024 11⁄8\" 2999 ea 950-35028 11⁄8\" EMi 4299 ea 58 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»FK ROD ENDS SPRINT A | 5⁄8\" X 1⁄2\" ALUMINUM ROD ENDS • 3-piece extra strength rod end with heavy-duty shank • Ball is made of 52100 steel, heat treated and hard chrome plated and race is heat treated steel alloy, zinc plated and chromate treated .Body is 7075-T6 aluminum with hard red or black anodize finish FK ALUMINUM 150-008-THREAD Red $1399 ea FK STEEL 150-015-THREAD Black 1399 ea FK JACOBS B | 5⁄8\" X 1⁄2\" STEEL ROD ENDS LADDER • 3-piece extra strength rod end with heavy-duty shank • Ball is made of 52100 steel, heat treated and hard chrome plated • Race is heat treated steel alloy, zinc plated and chromate treated • Body is low carbon steel, heat treated, zinc plated and chromate treated 150-016-THREAD Low carbon steel $1199 ea 150-007-THREAD Alloy steel 2099 ea C | JACOBS LADDER ROD ENDS • 5/8\"-18 male x 3/8” hole 150-017 RH Red $1499 ea 150-018 RH Black 1499 ea 150-019 LH Red 1499 ea 150-020 LH Black 1499 ea E | THROTTLE LINKAGE ROD ENDS • 3/16\"-10-32 150-011 FK RH aluminum female $799 ea 150-012 FK RH aluminum male 799 ea F | ALUMINUM ROD ENDS D | ALUMINUM JAM NUTS • 3/8\"-24 x 3/8” hole $999 ea 999 ea 315-9600 1⁄2\" - 20 RH $199 ea 150-013 FK RH female aluminum 315-9601 1⁄2\" - 20 LH 199 ea 150-014 FK RH male aluminum 315-9603 5⁄8\" - 18 RH 199 ea 315-9604 5⁄8\" - 18 LH 199 ea G | ROD ENDS $1299 ea 315-9605 3⁄4\" - 16 RH 199 ea 1299 ea 315-9606 3⁄4\" - 16 LH 199 ea • 7/16\"-20 x 7/16 hole” 117-0807L FK LH male aluminum 117-0807 FK RH male aluminum SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 59 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT ROD END SUPPLY 3⁄8\" Hole A | BLACK ANODIZE ROD ENDS C | CHROMOLY ROD ENDS • Self-lubricating and self-sealing • Works perfect for jacobs ladders • 7075-T6 aluminum • 4130 chromoly • Black anodize • Eliminate the need to add a spacer or drill the ladder • Reduces to a 3/8\" hole 910-02158 1⁄2\"hole - 1⁄2\" x 20 RH $1099 ea 910-02124 1⁄2\" x 3⁄8\" RH male $1599 ea 910-02159 1⁄2\" hole - 1⁄2\" x 20 LH 1099 ea 910-02125 5⁄8\" x 3⁄8\" RH male 1899 ea 910-02160 1⁄2\"hole - 5⁄8\" x 18 RH 1099 ea 910-02161 1⁄2\" hole - 5⁄8\" x 18 LH 1099 ea B | 7⁄16\" ALUMINUM ROD ENDS $1099 ea D | BIRDCAGE BEARINGS $3499 ea 1099 ea • 7075-T6 aluminum • Available in standard single or dual angular contact • 7/16\" shank 3/8\" hole 940-59142RS28GG 1.1 x 3.94 with grease groove - dual • Self-lubricating and self-sealing 117-0809 7⁄16\" RH 117-08009 7⁄16\" LH don’t just s8e0ll 0em.2, 8W4e.r2a9c0e e2m ... We RTBTBRaoonaeiorrrddaddssirmucEiiioonasnunnggdcRsesAShostrdmomspossre... Log on and request your Free catalog today www.rodendsupply.com P.O. Box 2080 Olathe, KS 66051 PH. 913-768-1017 FAX 913-768-4462 60 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»ROD ENDS SPRINT A | PRECISION ROD ENDS • Application: tie rods, drag link, jacobs ladder STEEL WITH TEFLON KEVLAR RACE PRICE SHANK/HOLE MALE LH MALE RH FEMALE LH FEMALE RH $599 ea 3⁄16\" 175-0310 175-0110 175-0410 175-0210 PRECISION 1⁄4\" 175-0311 175-0111 175-0411 175-0211 499 ea 5⁄16\" 175-0312 175-0112 175-0412 175-0212 599 ea 3⁄8\" 175-0313 175-0113 175-0413 175-0213 599 ea 7⁄16\" 175-0314 175-0114 175-0414 175-0214 899 ea 1⁄2\" 175-0315 175-0115 175-0415 175-0215 899 ea SHANK HOLE MALE LH MALE RH PRICE 5⁄8\" 1⁄2\" 175-0326 175-0126 $1399 ea 175-0327 175-0127 1799 ea 3⁄4\" 5⁄8\" PRICE B | PRO-1 BLACK CHROMOLY ROD ENDS $1199 ea • Application: tie rods, drag link, jacobs ladder 1399 ea HEAT TREATED CHROMOLY 2PC. BLACK OXIDE COATED PRICE $1599 ea PRO-1 SHANK HOLE MALE LH MALE RH CHROMOLY 1⁄2\" 1⁄2\" 175-0705 175-0505 1899 ea 5⁄8\" 1⁄2\" 175-0726 175-0526 2099 ea 1999 ea C | CHROMOLY ROD ENDS 2599 ea 2599 ea • Application: rear arms, tie rods, drag link, jacobs ladder PRICE WITH TEFLON KEVLAR RACE $999 ea SHANK HOLE MALE LH MALE RH 1⁄2\" 3⁄8\" 910-02124 999 ea 5⁄8\" 3⁄8\" 910-02125 5⁄8\" 1⁄2\" 910-02326 910-02126 5⁄8\" 5⁄8\" 910-02316 910-02116 3⁄4\" 5⁄8\" 910-02346 910-02146 3⁄4\" 3⁄4\" 910-02336 910-02136 D | ALUMINUM ROD ENDS • Application: radius rods, jacobs ladder WITH TEFLON KEVLAR SELF LUBRICATING & SELF SEALING RACE ALUMINUM SHANK HOLE MALE LH MALE RH 117-0808 1⁄2\" 1⁄2\" 117-0808L 117-0810 5⁄8\" 1⁄2\" 117-0810L F | 1⁄2\" TO 3⁄8\" NYLON ROD END SPACER • 10 spacers in a bag 175-900 $599 bag E | INDUSTRIAL TAPS G | SEALS-IT ROD END SEALS • Four flutes • Neoprene rubber seal bonded to an aircraft quality washer • Specify LH or RH thread • Extends the life of rod ends by keeping the dirt out SIZE LH RH 910-01500 5⁄16\" $1099 6 pk 912-81032 3⁄8\" - 24 $1899 ea $999 ea 910-01501 3⁄8\" 1099 6 pk 912-81033 7⁄16\" - 20 N/A 1199 ea 910-01502 7⁄16\" 1099 6 pk 912-81034 1⁄2\" - 20 2399 ea 1499 ea 910-01503 1⁄2\" 1099 6 pk 912-81036 5⁄8\" - 18 3999 ea 2199 ea 910-01504 5⁄8\" 1199 6 pk 912-81037 11⁄16\" - 18 3499 ea 3499 ea 910-01505 3⁄4\" 1299 6 pk 912-81038 3⁄4\" - 16 4499 ea 2799 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 61 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT PIT ACCESSORIES A | BRUNNHOELZL G | TORSION TUBE $2999 ea ALUMINUM 3 BULLET TOOL PUMP JACK • Mandrel can be inserted • Max height of 171/8” into a damaged torsion tube • Weighs only 32 lbs. for removal of dents or kinks • Includes 40” 1-piece handle • Available in black • Small diameter end is sized to fit into an old torsion bar for use as an extension when hammering it through the tube 910-82365 Brunnhoelzl jack (shown) $79999 ea 910-82366 Brunnhoelzl dirt wings 5999 pr • Hardened steel 910-82360 Goodyear 1.5 ton jack • Sized for .095\" wall tubes 910-82357 Goodyear dirt wings 14999 set 946-17308 2999 pr H | TWO-HANDLED UTILITY JUGS • 5 gallon, available in black, blue, purple, red, white and yellow B | MUD RELEASE AGENTS 696-500-COLOR $2099 ea • Keep dirt, mud and debris from sticking 50\" • Will not harm paint, plastics or metals 23\" • Environmentally safe $1999 ea 910-80102 Mudd-Off - 1 qt. = 3 gal. $999 qt J | TRACK MAT 910-80160 Mud-X - 1 qt. = 10 qts. 699 qt 910-80165 Mud-X - 1 gal. = 10 gal. • Padded vinyl 1999 qt • 23\" x 50\" • Folds into quarters for easy storage C | SPRAYERS 910-78310-COLOR • Steel can with adjustable nozzle K | TODD'S PERFORMANCE • Available in black powder coat or maroon SPRINT CAR FLOATER WHEEL • One quart $4999 ea 1 910-1002 Black 2999 ea • Find a new or used LR or RR wheel (must be able to hold air) 2 728-19419 Maroon • Remove wheel center, replace with floater wheel • Use for loading, unloading, moving around the shop, moving D | MUD SCRAPERS into car washes, etc. • Takes twisting motion off axle, making car much easier to move around • 32” foam-gripped handle • 41/4” wide blade 910-666 $19999 ea • Long reach 1 910-04310 Speedway $1499 ea 2 106-80715 AFCO 1999 ea 3 910-04300 Scraper Kit 599 ea E | TITAN GRINDER L | CAR STANDS WITH 7\" DISC KIT • Sturdy fabricated stands won’t buckle under high load capacity • Adjustable dial speed control • Strong 3.5” rubber casters smoothly runs over metal shavings, • Lock-on switch • Auxiliary handle mounts small bolts and other debris • 7” carbide grinding disc with 5/8”-11 center 940-81105 $21999 pr 910-82082 Grinder kit (shown) $11999 kit M | HOOD BLANKET & 728-22504 8999 ea TAIL TANK COVER 910-82080 7\" 11 amp polisher grinder 3499 ea 910-82085 4\" carbide disc 4499 ea • Hood blanket - helps keep heat 910-82081 7\" carbide disc 5999 ea in the motor 7\" nail head • Triple layer design, vinyl cover $3999 ea 2499 ea sewn on for protection 799 ea • Top snaps around down tubes, F | WORK LIGHT 1999 ea bottom includes a heat flap to go around the header • Retro fits into existing cord/handle/hose • One size fits all combos or pull down reel cord • Tail tank cover - fits standard 910-81014 Light kit (shown) outlaw style fuel tanks 910-81012 910-81013 Light cord 940-2610 Hood blanket (shown) $17999 ea 910-81011 Replacement bulb 940-3800 8499 ea Housing w/bulb Tail tank cover 62 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»SET-UP BLOCKS/FRONT TORSION ARMS/STOPS SPRINT J | TORSION STOP D | FRONT TORSION ARMS A | SET-UP • 13/4” tube split EAGLE Front black (shown) $4999 ea BLOCKS • Available in aluminum or titanium 940-37004-SIDE Right front (shown) $5499 set SCHNEE Left front • Adjustable in 1/4\" increments 1 910-373281 Two-tone aluminum $4999 ea 940-36010 5499 set • Use 6” blocks to square the rearend and 4” 2 940-21800 DMI Titanium 11499 ea 940-36009 blocks to race, on raised rail cars subtract 1” on this set-up on the LH side STANDARD $6999 pr 910-82750 1.75\" - 4\" 7999 pr 910-82755 3\" - 6\" K | TITANIUM $8999 ea E | FRONT TORSION ARMS PROFESSIONAL $8499 pr STOP 8999 ea 940-82752 1.75\" - 4\" 9499 pr • Updated design, clean anodized 940-82754 3\" - 6\" • Complete with Ti pinch • 2024 material and adjuster bolts • 11/8\" spline • Hardware included 802-2160 13⁄4\" split (shown) 802-2170 2\" split L | TORSION STOP 940-4901 RF - black (shown) $5499 ea ACCESSORIES 940-4903 LF - black 5499 ea 1 940-82758 Adapters • Black anodize finish 940-4911 RF - plain 4499 ea 2 910-5125 Cradle rollers • Machined from aircraft grade aluminum 940-4913 LF - plain 4499 ea • Hardware included $3999 pr 940-37011 Aluminum (shown) $2599 ea 8999 pr 940-37012 Black 3999 ea 940-37040 Titanium 6999 ea M | ALUMINUM F | FRONT TORSION ARMS TORSION STOP 940-5150-SIDE Plain $4499 ea B | SPRINT • Hardware included 940-5151-SIDE Black 5499 ea ALIGNMENT TOOL 815-C00090 M&W 13⁄4\" split 815-C00095 M&W 2\" split $2199 ea • Available in either Standard or Pro Models 2199 ea • Quick attachment system for rearend N | LPS $3199 ea G | ALUMINUM CHROMOLY 199 ea TORSION ARMS squaring TORSION STOP 299 ea • All aluminum construction 899 ea • Available in 18” or 22” lengths • Pro Model has black anodize/polished finish • 11/8\" serrations, 13/4\" split • 1” or 11/8” serrated, 1” thick • Fits 3” axle • Visit our website to see the latest \"how-to\" video 490-14 Eagle/Maxim (shown) 910-37220 18” long, 1” serration $3999 ea 940-81055 Standard $13999 ea 490-15 Pinch bolt 910-37222 22” long, 1” serration 3999 ea 910-81056 Pro (shown) 19999 ea 910-37340 Stop bolt 7⁄16\" 3299 ea 940-6102 Titanium stop bolt 7⁄16\" 910-37221 18\" long, 11⁄8\" serration 3999 ea 910-37223 22\" long, 11⁄8\" serration H | ANGLED AND S-BEND TORSION ARMS P | STOP BOLTS 815-C00085 RF 17\" Short 10° $4999 ea C | SQUARING BLOCKS $5499 ea GRADE 8 $199 ea 910-55400 LF S-Bend $7999 ea • The ultimate setup blocks for squaring your 910-37339 1.5 x 7⁄16\" UNF 299 ea sprint car 910-37340 21⁄4\" x 7⁄16\" UNF TITANIUM - TRU LITE $899 ea • EZ Square Tools have adjustable blocks and 940-6102 1.9\" x 7⁄16\" 3999 ea quickly and securely mount to your car and 940-6104 Titanium stop bolt kit cradle the axle, making it a breeze to set JAM NUTS $199 ea height and square 315-9602 Alum. jam nut 7⁄16\"-20 RH 199 pk 940-38000 175-6044-RH Steel jam nut 7⁄16\" 6/pack • The Optional (sold separate) Adjustable Rule Arms (pair) give you precise and quick setups all the time! LF S-Bend 1 940-6011 Squaring block sprint $28999 ea 2 940-60112 Squaring arms sprint 6999 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 63 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT REAR TORSION ARMS/TORSION BARS A | HOLLOW TORSION BARS • 29\" or 30\" • Made of proprietary high alloy steel 1.015\", 1.025, 1.050, .1.065 G | TORSION STOP RETAINERS • 11/8\" serrated, available in .925, .950, .975, 1.000, $11999 ea 624-155-DIA 29\" length 11999 ea • Installs and removes quickly and easily, makes a one person job 624-156-DIA 30\" length • Same torque specs and bolt size as all other front end bolts • Holds over 5000 lbs. of force, weighs only 2.5 oz • Knurled for extra grip 910-11783 $4299 pr B | CHALK STIX TORSION BARS • Made of the highest quality material available • 30” long, 11/8” serrated • Available in .950”, .975”, 1.000”, 1.012”, 1.025”, 1.037”, 1.050” H | SWAY A WAY 272-30-SIZE Maxx $14999 ea 272-31-SIZE Standard 10999 ea • Pre-stressed torsion bars • Heat treated aircraft alloy steel • Centerless ground with 34% More travel • No settling • Every bar individually tested • Left Front or Right Rear , Right Front or Left Rear 625-30 $10799 ea C | REACTOR TORSION BARS • 30” length – 11/8” diameter • Maintains consistency • Available in .975”, 1.000”, 1.015\", 1.025”, 1.050” J | FACTORY REAR ARMS 1 940-2395-SIZE $11999 ea 2 940-37037 T-rex torsion stop retainer 1299 ea • Eagle – beautiful two-tone finish • Triangulated pockets for superior strength • Schnee – oval pocket anti-deflection system • Common lengths and offsets work with any chassis D | HOLLOW TORSION BAR EAGLE Eagle Black Series (shown) $6999 ea 940-37006-SIDE $6999 ea • Made of proprietary high alloy steel SCHNEE RR • Bars are machined in one continuous pass and polished to assure no 940-36008 LR 6999 ea 940-36007 LR Stack tube (shown) 8499 ea surface imperfections, to assure consistent and responsive performance 940-36011 • Available in .975”, .987, 1.000”, 1.015”, 1.025”, 1.035”, 1.050\" $5999 ea 5999 ea 1 561-25300-SIZE 30\" torsion bar $11999 ea K | TWO-TONE REAR TORSION ARMS 561-25310-SIZE 31\" torsion bar 11999 ea Torsion stop retainer 1799 pr • Constructed of 2024 billet aluminum for added stiffness 2 561-718750 31\" bar adapter 299 ea • Integrated pockets to keep parts lightweight 946-17400 • Beautiful, black anodize two-tone finish • Hardware included 940-4906 RR torsion arm 5\" offset (shown) 940-4908 E | HOLLOW GUNDRILLED TORSION BAR LR torsion arm 3.5\" offset • Made of proprietary high alloy steel L | 4130 REAR ARM KIT • Bars are machined in one continuous pass and polished to assure no • Includes chromoly 1.375\" bent tube with .120\" wall surface imperfections, to assure consistent and responsive performance • Threaded shock/rod end spud • Gundrilling allows use of superior material which will allow the bar to • Splined torsion bar end • Welding and fitting required twist farther and store more energy during windup for a quicker rebound • Available in .975”, .987, 1.000”, 1.015”, 1.025”, 1.035” 910-37308 11⁄8\" spline (shown) $4999 kit 490-8 3399 ea 561-25301-SIZE Torsion bar $13999! ea 490-82 .120\" steel torsion arm end 3399 ea 561-718750 Torsion stop retainer 1799 pr .095\" steel torsion arm end MEASURING DIAGRAM A CL F | TORSION STOP RETAINER KIT TO MEASURE “A” CL CL MEASURE FROM • Keep torsion arms and stops from falling off CENTER OF THE B • Simply place the rod inside the torsion bar and thread on the end caps SPLINED HOLE TO • Quick and easy installation THE END OF ARM 940-37007 Torsion stop retainer kit $2799 ea TO MEASURE “B” PLACE ARM ON A FLAT 940-37027 Black torsion stop retainer kit (shown) 2999 ea SURFACE AND MEASURE TO CENTER OF ROD END HOLE 64 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»BUSHINGS SPRINT C | TORSION BAR/BUSHING REAMER • Billet aluminum construction 2-piece take apart design • Black anodize for added protection 940-81035 $22499 ea A | SPRINT ALIGNMENT TOOL • Available in either Standard or Pro Models • Quick attachment system for rearend squaring • All aluminum construction • Pro Model has black anodize/polished finish • Fits 3” axle • Visit our website to see the latest \"how-to\" video D | BUSHING INSTALL KIT 940-81055 Standard $13999 ea 910-81056 Pro (shown) 19999 ea • Tool – safely drives the bushing into the E | BUSHINGS torsion tube without bending or breaking the flange BRONZE Swindell Series-.095\" x 11⁄8\" $699 ea 1 910-37117 Precision Oillte -.120\" x 1\" 599 ea • Install bushings straight and true every 2 910-37100 Precision Oillte -.120\" x 11⁄8\" 499 ea time Precision Oillte -.095\" x 11⁄8\" 599 ea 910-37118 • Bushings – bronze and oil impregnated 910-37119 • Narrowed face for more spline engagement • Recess bore for grease barrier ALUMINUM 3 910-37219 Speedway - .095\" x 11⁄8\" $599 ea 910-37218 Speedway - .120\" x 11⁄8\" 599 ea 910-37114 Tool w/4 bushings .095\" bronze $3999 kit 910-37121 Set of 4 bushings .095\" 2499 set PLASTIC 910-37117 Bushing .095\" bronze 699 ea 4 910-37319 M&W - Delrin .095\" $399 ea 910-37115 BushingTool 1999 ea B | 32\" LONG STRAIGHT EDGE 910-37318 M&W - Delrin .120\" 399 ea 946-17308 Torsion tube repair bullet 2999 ea 940-37322-SIZE Zemco - .095\" or .120\" 499 ea 946-17307 Nerf spud tool 4999 ea • Used to check for straightness 577-620 $9499 ea HARTFORD, WISCONSIN PROUDLY MADE IN THE U.S.A. SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 65 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT COCKPIT A | TEL TAC TACHOMETERS F | GAUGE KITS • Self-contained digital tach with built-in memory • Stewart-Warner – kit includes 21/16” standard oil pressure 0-100 psi • Tel Tac II recalls and displays the highest overall rpm and 100° F-250° F water temperature gauges for 30 minutes after race • Speedway – kit includes 25/8” standard oil pressure 0-100 pressure and • Tel Tac Oval Track Pro show the highest overall rpm, 100° F-280° F water temperature gauges the four lowest rpms and the four highest rpms • Both kits include an aluminum gauge panel from two laps 910-82020 Tel Tac II $30499 ea 940-8300 Stewart Warner $9799 kit 910-82030 Tel Tac Oval Track Pro 42499 ea 940-8301 Speedway (shown) 4499 kit 910-82021 Wiring Harness 2899 ea B | XTREME ACCU-TACH G | KEVLAR OIL $3299 kit PRESSURE LINE KIT 1499 ea • Works with 4, 6 and 8 cylinder engines using an MSD ignition or a • Kit includes Kevlar 18” AN 4 line, 90° magneto gauge fittings • Factory set for 8 cylinder engines and 1 910-1898 Kit will function up to 15,000 rpm 2 940-2176 Oil gauge fitting • This digital tach accepts any standard H | TOGGLE K | GAUGE PANELS alkaline 9-volt battery to function for IGNITION many hours of operation ON SWITCH • Nest both gauges in a clean, simply and easily removable • When the display button is pushed • Works great as a kill switch or plate after your last race, the Accu-Tach with other auxiliary equipment will display four numbers: • Attaches with fastener buttons • Comes with rubber boot and springs • 1st number is the highest rpm turned in the last race • Single pole, double throw • 2nd number is the low average rpm turned in the last race • 3rd number is the high average rpm turned in the last race 913-64380 On/off $999 ea 940-8361 25⁄8\" $799 ea • 4th number is the time in seconds your engine took to rev from your 940-8362 799 ea 21⁄16\" low average rpm to your high average rpm 940-101025-SIZE J&J 2899 ea • The display button has three different functions: • Starts the display cycle of highest rpm, average low rpm, average high rpm and ramp time • Resets any stored information if held for more than five seconds • Displays the engine's current rpm for fifteen seconds while engine is running 910-11781 $36999 ea C | VTAC TACHOMETER 63⁄4\" • Easily removes when at car wash or 27\" for quick installation in a back-up car 63⁄16\" • Works with 4, 6 or 8 cylinder engines with magnetos or standard ignitions 255⁄16\" • Comes with instructions, mounting J | EXTREME 63⁄4\" bracket and wire loom for installation ENVIRONMENT $42999 kit SERIES 21⁄16” GAUGES 251⁄4\" 910-82028 Tachometer 12499 ea 910-82036 Slide bracket 4499 ea • Waterproof design - sealed L | ROCK SCREENS 910-82037 Cable $8499 ea front and rear for protection 12199 ea against the elements in • Choose wrap-around or flat-style D | AUTO METER 25⁄8\" 11999 ea exposed cockpits • Available in zinc non-glare, black ULTRA-NITE GLOW-IN- 1499 ea • 6 pin DTM connector at gauge THE-DARK GAUGES 1799 ea makes for a sealed connection finish or stainless • Ultra light weight construction • Glow-in-the-dark with blue anodize bezels • White through-dial LED lighting 1 910-55100- Wrap-around $3999 ea • Waterproof and designed for extreme racing conditions with red pre-set full dial BLK 182-4521 Oil pressure 0-100 psi warning with solid and 910-55100 182-4535 Water temperature - 140° F - 280° F 4' blink transitions -CHROME Wrap-around 3999 ea 182-4531 Water temperature - 140° F - 280° F 6' 182-2272 Water temperature adapter, aluminum, 3⁄8\" 2 910-55101- Flat style 3699 ea 182-2271 Water temperature adapter - brass long, 3⁄8\" BLK 910-55101 E | STEWART-WARNER -CHROME Flat style 3699 ea 21⁄16\" GAUGES 1 182-9253 Oil Pressure $20499 ea 3 910-55102 Stainless 3499 ea • Nests in tight confines 0-120 psi - Flat • Chrome bezels with black face • 36” lead for water temperature 2 182-9255 Water Temp. 17299 ea 665-82209 Oil pressure 0-100 psi 100°-300°F 665-82236 Water temperature, 100° F-250° F 940-8362 21⁄16\" gauge panel 182-9217 Battery Pack/ 7999 ea Charger Kit $3999 ea See the entire line of M | TRANSPONDER 5499 ea Auto Meter gauges at MOUNT 799 ea SpeedwayMotors.com 910-12863 $3999 ea 66 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»NOSE WINGS SPRINT E | ADJUSTABLE TUBULAR NOSE WING STRAPS • Chromoly straps have formed mounting tabs for greater stability 940-1876 Maxim 6\" - 7.5\" $3999 pr 90º 940-1872 Maxim 8.75\" - 10.25\" 3999 pr 940-1873 J & J 8.75\" - 10.25\" 3999 pr 940-1874 Eagle 7.75\" - 9.25\" 3999 pr F | STAINLESS NOSE WING STRAPS 60º • Durable 304 stainless steel construction $10999 ea • Offset fits any chassis with three height adjustments – 8.25”, 8.75”, 9.25” 3999 ea 1299 ea 940-1877 Lightened $1199 ea A | NOSE WINGS 940-1878 Solid 1199 ea $11999 ea • Large outlaw side boards available: 3999 ea G | NOSE WING POSTS $4999 ea 1\" or 2\" dip 1999 ea 4999 ea • 13\" long STRAIGHT SIDE BOARDS $14999 ea ALUMINUM 1 940-3200-DISH-STR Nose wing 3999 ea 940-1850 Straight (shown) TITANIUM 910-77400-2 Carbon fiber cap 940-1855 Curved $999 ea 940-1851 Straight 940-3201-SIDE $13499 ea 1099 ea 940-1856 Curved Side board 13499 ea 60° ANGLE SIDE BOARDS 999 ea 1299 ea 2 940-3200-DISH-ANG Nose wing 3999 ea H | NOSE WING POSTS 1199 ea 910-77400-2 Carbon fiber cap 1299 ea 940-3202-SIDE Side board $4999 pr 1199 ea SHARK NOSE WING STAINLESS 3 940-3205 Complete wing 946-12024 Bent w/ Single hole 910-77400-2 Carbon fiber cap 946-12026 Straight w/ Single Hole 946-12028 Bent w/ Slotted Hole 946-12030 Straight w/ Slotted Hole (Shown) J | REAR NOSE WING STRAPS 1 910-77460 Econo, aluminum $499 ea B | NOSE WINGS 2 940-1865 Milled, aluminum 999 ea ANGLE BOARD NOSE WINGS 940-5592 Outside mount 940-5593 STANDARD Inside mount K | NOSE WING CLAMPS OFFSET 940-5603 Replacement wicker bill ALUMINUM 910-77552 Nose wing cap 940-1860 Standard clamp 940-1830 Aero clamp $2999 ea AERO C | ADJUSTABLE NOSE STEEL 4999 ea WING STANDS 940-1837 Offset $3599 ea • Accept into the 1” spuds on the chassis • Sideboard mount • 23/4” slot 940-2353 L | TOP WINGS D | NOSE WING STANDS • Outfitted with the same options and features used by champions, these • Mount off your torsion bar tube wings are furnished with the major components, factory assembled CHROMOLY AERO POSTS 1 940-1825-SIDE Clampandpost(shown) $6999 ea 1 940-1832 Post - 113⁄4\" 3999 ea ASCS DISH TOP WING ACCESSORIES 940-1821 4299 ea 940-5604 Replacement wicker bill 1999 ea Post - 12\" 3999 ea 19499 ea 940-1822 3999 ea 940-5596-SIDE Replacement side boards 940-1831 Post - 121⁄2\" 4999 ea 6499 ea 3899 ea 940-5598-SIDE Side board bracket kit 2599 ea Post - 123⁄4\" $1999 ea $6999 ea 940-8809 Top wing post 15999 ea 2 940-1830 Alum. clamp - universal black 4999 ea 6499 ea 4999 ea FLAT TOP WING ACCESSORIES 11999 ea 1 940-1820-SIDE Alum. clamp - plain 2999 ea 940-5604 2599 ea TITANIUM Replacement wicker bill 940-1800-SIDE Clamp and post 67 940-5594-SIDE Replacement side boards 940-5595-SIDE Side board bracket kit 940-1856 Universal, curved 910-77551 940-1862-SIDE Post - outer mount, curved 940-8809 Carbon fiber cap 940-1860 Alum. clamp Wing post SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT TOP & NOSE WINGS A | 5' X 5' WING KITS— F | NO-RIVET COUNTERSUNK RIVETS WING CAPS • WoO, ASCS, Knoxville & IRA approved • Self-adhesive black plastic • Recessed rivets • Heat to make soft and mold to fit wing • 25 square feet • Includes internal runners 940-3245 36\" x 3.5\" nose wing $3499 ea • Chromoly front posts, flush rivets 940-3240 60\" x 4.5\" top wing 6499 ea • All holes are pre-drilled for easy assembly DISH WINGS 21⁄2\" dish wing with super boards $64999 ea G | 1\" AND 2\" WICKER BILLS 940-5553 21⁄2\" dish wing 59999 ea 940-5549 21⁄2\" dish wing 1° slant with super boards 69999 ea • Use where rules allow 940-5551 Belly rudders for 21⁄2\" dish wing 2399 ea • Fasten-on style under rear wing edge 940-5052-SIDE Std side board 9799 ea 940-3554-SIDE Right hand super board 12999 ea 940-5540 1\" Nose wing - 36\" wide $1499 ea 940-3554-RHSB 940-5542 1\" Top wing - 60\" wide 2499 ea FLAT TOP WINGS Flat-top wing $59999 ea 940-5544 2\" Top wing - 60\" wide 1999 ea 940-5550 Flat-top wing 1° slant with super boards 69999 ea 940-5546 Flat-top wing belly rudder 2399 ea 940-5051-SIDE B | SHARK 5' X 5' 940-5552 Flat $66999 ea H | EASY GLIDE TOP WING KITS 940-5554 21⁄2\" dish 67499 ea TOP WING POSTS 940-8812 Wing post 2799 ea • WoO, ASCS, Knoxville and IRA approved 910-77400-1 Carbon fiber cap 9799 ea • Steel t-post with a radius wing • 25 square feet ride surface • Narrow nose Flat • 75° posts • 113/4\" tall • Reduced weight on all components • 1” wicker bill (.060” 2024) 1 940-8811 Steel std. $2399 ea • .016” 6061 aluminum skin 2 940-8812 Steel ang. 2799 ea • Reinforced tail section • All holes are pre-drilled for easy assembly • Aerodynamic caps on front and rear of sideboards 940-1841 Titanium 11999 pr 940-8813 T-top post 999 ea C | HRP F-KIT TOP WING 940-8815 WoO, ASCS/others approved 2999 ea FLAT RACER SERIES 940-5555 $55999 kit J | TOP WING • Introducing our new \"Racer\" Series Sprint FRONT ROLLER Car top wings T-POSTS • High quality at an economical price • Include roller bearings that • We lowered the cost, not your provides better wing movement and prevents binding expectations. • Recessed rivet • Twist-in style • .018 aluminum construction • Chromoly construction • Bare aluminum finish • Sold in pairs • Ships in a tube 940-1840 $6499 pr E | WING CAP PROTECTORS K | CLECO KIT • Protects wings and keeps contour of wing $2199 kit for proper aerodynamics • Includes tool 799 pk D | HRP D-KIT TOP WING • Twenty 3⁄16\" clecos, 1 clamp 899 pk DISHED RACER SERIES SPEEDWAY-CARBON FIBER 910-04001 Kit 999 ea 910-77400 Top and nose $13999 pr 910-04002 10 pk. 3⁄16\" clecos 999 ea • Introducing our new \"Racer\" Series Sprint Car 910-77400-1 9799 ea 910-04009 10 pk. 1⁄8\" clecos top wings 910-77400-2 Top 3999 ea 910-04005 Cleco tool 910-040011 Holding tray • High quality at an economical price $8499 pr • We lowered the cost, not your expectations. Nose 5999 ea L | WING TOOL TRAY • Recessed rivet AEROTEC-HIGH IMPACT PLASTIC 3499 ea • .018 aluminum construction 910-77500 Top and nose • Aluminum construction • Bare aluminum finish 910-77500-1 $11999 ea • Mounts on nose wing • Ships in a tube 910-77500-2 Top • Provisions for spark plug and/or injector Nose nozzle storage VORTEX-CARBON FIBER • 12” x 18” x 3” 910-77551 Top (flat top wing) 940-5556 $55999 kit 910-77552 3999 ea 910-81010 $4999 ea Flat Nose 68 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
FLARE CAPS »WING LINES SPRINT BLUE BLACK PRICE A | WING VALVE AN 3 617-6194 617-61941 $599 ea AN 4 617-6195 617-61951 • Offers 3” per second movement and able to AN 6 617-6196 617-61961 699 ea move wing forward at speed AN 8 617-6197 617-61971 699 ea 799 ea • Plumbed straight from pump with -6 lines and -3 to the cylinder FLARE REDUCERS PRICE BLUE BLACK $699 ea • Lightweight cast construction with unique mounting feature for easy access AN 3 - AN 4 617-6175 617-61751 699 ea AN 4 - AN 6 617-6176 617-61761 90° FLARE ADAPTERS 940-10100 $30999 ea BLUE PRICE BLACK PRICE AN 3 3⁄8\" 617-6079 $899 617-60791 $899 AN 4 1⁄8\" 617-6080 999 617-60801 999 STRAIGHT FLARE ADAPTERS B | STINGRAY BLUE PRICE BLACK PRICE WING VALVE AN 3 1⁄8\" 617-6041 $499 617-60411 $599 • Lightweight all billet design – 30% lighter AN 4 1⁄8\" 617-6042 499 617-60421 599 • Flow performance matched to entire power 45º FLARE ADAPTERS steering system BLUE PRICE BLACK PRICE • Ergonomic “F1” style handle AN 3 1⁄8\" 617-6093 $899 617-60931 $899 • Precision seal technology AN 4 1⁄8\" 617-6094 799 617-60941 799 • 100% bench-flow tested H | QUICK DISCONNECT F | WING SLIDER HOSE KIT 546-365 $18599 ea WING FITTINGS $13999 ea • Supplies you with hoses and fittings to C | HOTWING VALVE • Eliminate mess and reduce the time to change a plumb your valve to your cylinder wing or ram after a crash 940-2920 • Comes with two hoses • No tools needed, plumb into existing lines or valves • Two 90° fittings for the wing cylinder • Select a socket and a plug to complete one coupler • Four fittings for the valve • Due to variances in steering gears, you 1 468-21802 1⁄8\" NPT Male Socket $3299 ea 468-21403 AN 3 Male Socket 2999 ea will have to select hose lengths for your 468-22406 AN 3 Male Plug 1999 ea pressure and return lines AN 4 Male Socket 2999 ea • Available in either braided or Kevlar 2 468-21404 AN 4 Male Plug 1899 ea • Fits most popular chassis brands 3 468-22404 1⁄8\" NPT Male Plug 2099 ea 4 468-22802 1 940-1899 Braided hose kit $4999 ea 2 940-1895 Kevlar hose kit 5999 ea J | STEERING GEAR FITTING D | WING VALVE BOLTS • AN 6 with 1/8” NPT port fitting • Works for tying in wing slider valve inline or 940-380 $699 pr off steering gear 940-381 Ti64 hex (shown) 699 pr 617-7034 $1299 ea G | AN 4 940-6060 Ti64 button 299 ea KEVLAR Tru-Lite hex WING LINES K | WING SLIDER PLUMBING • Rated for pressurized systems • Smooth bore lines features a low expansion • push-lock hose end 1/8” fittings for 1/4\" O.D. nylon tubing PTFE inner-liner • Compatible with all hydraulic/brake fluids 940-1880 90° fitting $599 ea • Extremely durable and very flexible 940-1885 Straight fitting 399 ea 940-1890 Hose per foot STRAIGHT TO STRAIGHT $1299 ea 0.99 ea 910-31812-4 12\" 1499 ea 910-31818-4 18\" 1599 ea L | REPLACEMENT 910-31820-4 20\" 1699 ea E | COMPLETE KEVLAR O-RINGS FOR AN 910-31822-4 22\" 1699 ea WING LINE KIT FITTINGS 910-31824-4 24\" 1899 ea 910-31829-4 30\" 1999 ea • Sized for KSE Gen 2 steering • Nitrile 1\" O-rings are designed 910-31834-4 34\" 2099 ea • Everything you need to plumb your wing for standard fuel or oil applications 910-31838-4 38\" 2299 ea 910-31848-4 48\" system • Nitrile come in packs of 10 STRAIGHT TO 45 $3499 ea • Works from steering gear to a 10” cylinder • EPR2 O-rings are for alcohol or nitro, bag of 5 910-31832-4 32\" 3599 ea • Includes four AN 4 Kevlar pressure and 910-31833-4 331⁄2\" 617-3472 AN 3, Nitrile 1 $499 set STRAIGHT TO 90 $1799 ea return lines 617-3473 AN 4, Nitrile 1 499 set 910-31815-4 15\" 1999 ea 617-3474 AN 6, Nitrile 1 699 set 910-31816-4 16\" 940-1896 Gear to valve lines $11999 kit 617-3462 AN 3, EPR2 499 set 945-17502 Gear to valve lines 6999 ea 617-3463 AN 4, EPR2 499 set 945-17503 6499 ea 617-3464 AN 6, EPR2 699 set SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 69 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT WING TREES/WING CYLINDERS A | COMPLETE WING F | MPD WING $999 ea CYLINDER KITS CYLINDER ADAPTER • Included is everything you need 546-3580A to hook up your Gen 2 to your top wing cylinder G | WING RAM ADAPTER $1999 ea $499 pr • All kits include Goodridge • Install this adapter to add 15/8” more length and Kevlar wing lines and additional movement to your wing ram fittings, wing cylinder, MPD wiper and a FK aluminum 940-2330 rod end $29999 kit H | WING CLIPS • Speedway kit includes a 40499 kit Speedway wing cylinder and MPD wing valve • Allows quick wing tree adjustments with no wrenches • KSE kit includes a Stingray wing cylinder and valve 940-1991 Speedway 940-1802 940-1992 KSE (shown) B | AERO WING TREE INSERTS $1499 ea J | STINGRAY $15599 ea 1899 ea WING CYLINDER 18599 ea 940-8083-SIZE HRP - 3⁄16\", 1⁄4\", 5⁄16\" 399 ea 910-77852 Speedway .38\" • Engineered hydraulic wing cylinder • Internal quad seal technology 163⁄4\" • Rod end bearing mounting and standard porting • Standard 10” length C | ROUND TUBE • Pair with KSE Stingray wing valve REAR WING TREE 546-366 Cylinder 546-365 Wing valve 910-77855 Chromoly 946-17603 Wing cylinder reducer 3⁄8\" x1 ⁄4\" 940-77870 Wing tree leg chromoly $9799 ea K | HYDRAULIC 1699 ea WING CYLINDER • 8” stroke/13” body, 10” stroke/14” body, 12\" stroke/16” body 546-358-STROKE $4999 ea D | DIGITAL $6999 ea L | WING CYLINDER ANGLE GAUGE • Mate with Sweet wing valve (940-10100) • New digital angle finder reads from 0° to for optimum performance 90° in .05° increments • Rated to 1300 psi 910-89429 • First 10” cylinder designed for oil use 940-10200 Cylinder 940-10100 Wing valve $15999 ea 946-17603 Wing cylinder reducer 30999 ea 399 ea E | 3⁄8\" ROD ENDS 150-013 FK RH female aluminum $999 ea M | MANUAL WING SLIDER 150-014 FK RH male aluminum 999 ea 117-0730 RH Female aluminum 799 ea • 18\" - 29\" range 117-0806 RH Male aluminum 175-0213 RH Female steel 1199 ea 910-77810 Manual wing slider (shown) $5499 ea 175-0113 RH Male steel 599 ea 910-77811 Black manual wing slider 5999 ea 599 ea 946-17603 Wing cylinder reducer 399 ea WHEN NOTCHING TOP WING POSTS FOR CHASSIS CLAMPS ALWAYS ENSURE GRINDING OR DRILL BIT IS SPINNING TO THE FRONT OF THE CAR. THIS WILL KEEP THE POST FROM RAISING OUT OF THE CLAMP WHILE NOTCHING. 70 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON F | WING SPUD GUSSET ANY POLLUTION CONTROLLED MOTOR VEHICLE. 940-130 $699 ea D | VORTEX TIG WELDING CUP L | POSI-LOCK 916-90210 Welding cup $4999 ea SHIFTER TAB 916-90211 3 pack filters 699 pk 940-131 $499 ea 916-90217 Gas lens for 17 1999 ea A | 1\" NOSE WING POST SPUD 916-90220 Gas lens for 20 1299 ea 940-140 $2499 ea G | THROTTLE STAND 940-134 $1599 ea B | ADJUSTABLE AERO E | SHOCK SPACER SHOCK TOWERS 940-3761 $22999 pr 940-3762-SIDE 11499 ea 940-37030 $499 ea S | TORQUE TUBE HOOP »EAGLE /SCHNEE CHASSIS REPAIR 946-11296 $2999 ea SPEEDWAYMOTORS.COM M | WING SPUD 940-133 $1999 ea H | TETHER TAB N | BRAKE PEDAL TAB 940-135 $299 ea 940-137 $699 ea P | RH STEERING RING 940-139 $2499 ea Q | WING VALVE TAB 940-132 $399 ea SPRINT R | LR SHOCK ADJUSTER SYSTEM C | TORSION TUBE SPACER K | UPPER MOTOR 945-3700 Tube Kit 6499 ea J | RADIATOR BRACKET 945-3762 Steel Adjuster 9799 ea 71 MOUNT TAB 945-3763 Ti Adjuster 13999 ea 940-141 $499 ea 940-136-SIDE $799 ea 945-3013001 940-138 $499 ea Bung 1999 ea
»SPRINT CHASSIS REPAIR A | SAFETY BAR KITS G | BRAKE TABS • Protect from side intrusion 1 916-37068 Pedal tab $299 ea • Bent to conform to the most popular fiberglass 2 916-37069 LF/RR bulkhead tab 199 ea 3 916-37070 Inboard bulkhead tab 199 ea options 11/4\" x .065 wall 4130 chromoly H | TUBE GUSSETS • Each kit includes bent upright and support • Brace repair areas gusset 916-37019 Right side $4499 kit 916-37020 Rear tube gusset $799 ea 916-37026 Left side 4499 kit 916-37021 Front tube gusset 799 ea B | FUEL BRACKETS 1 499 ea • Eliminates fighting tank alignment 2 916-37022 Jacobs ladder gusset 1499 ea 916-37023 Safety bar gusset • Use brackets and sliding tank washers for easy J | SHIFTER TABS fuel cell installation 1 916-37076 1 916-37066 Posi-lock $299 ea 916-37079 Upper tank bracket w/washer $999 kit 2 916-37067 Twist-lock 199 ea Upper tank mount 599 ea K | FUEL CELL TABS 2 916-37077 Sliding washer 299 ea • Alter mounting location or update for a 3 916-37078 Fuel block bracket 599 ea different fuel cell brand or size Atl upper bracket 599 ea 970-16027 Schnee tank washer 299 ea 1 916-37054 Varied alignment $299 ea 940-36004 Lower tank mount 699 ea 2 916-37064 ATL lower tab, 3⁄8 hole 299 ea 940-36014 C | TORSION BAR TUBES 3 916-37065 2-sided, 3⁄8 hole 299 ea • Factory replacement 4130 chromoly tubes L | FUEL VALVE TAB 11/2\" O.D. with either .095\" or .120\" wall thickness 916-37071 3⁄16\" hole $299 ea 916-37034 285⁄16\" front tubes .095\" $4999 pr M | LOWER 'V' BRACES/'K' MEMBERS 916-37035 28\" rear tubes .095\" 4999 pr • 1\" diameter 916-37033 28\" rear tubes .120\" 5499 pr 916-37089 Front $999 ea 916-37031 31\" x .120\" 4999 pr 916-37090 Regular rear 999 ea D | TORSION TUBE SPACER 916-37091 Long rear 999 ea • 13/8\" x .095\" wall 4130 chromoly tubing N | WING VALVE TABS • Laser cut to fit 13/4\" tube split rack • Works with all wing slider valves 916-37036 $499 ea E | REPAIR SLUGS 1 916-37080 Standard $299 ea 2 916-37081 Angled 299 ea • Use when butting tubes together 3 916-37092 Long 899 ea • CNC turned inserts gives joint proper alignment 940-10102 Sweet 699 ea and added strength • 3\" long 916-37098 For 1.5\" x .095\" top rail $799 ea P | SAFETY STRAP LOCATOR 916-37099 For 1.375\" x .095\" bottom rail 799 ea • Keep tethers and cage nets in place F | BOSSES 916-37082 Safety strap $199 ea 940-135 Drag link tether 299 ea • Upgrade, relocate and repair 916-37103 Rearend tether 399 ea • 4130 chromoly 1 916-37058 Seat bar - 1\" tube 3⁄8\" bolt $299 ea Q | HALFSTEERINGMOUNTTABS 916-37059 299 ea Seat bar - 11⁄4\" tube 3⁄8\" bolt 399 ea • Use when upgrading to a Gen 2 or short 2 916-37060 style steering gear 3 916-37061 Jacobs ladder - chassis 399 ea 916-37062 Radius rod 916-37063 Steering mount 1\" tube, 5⁄16\" bolt 299 ea 916-37015 Steering mount 11⁄4\" tube, 5⁄16\" bolt 299 ea 1 916-37047 Bottom tab $399 ea Threaded radius rod 499 ea 2 916-37046 Top tab 399 ea 3 916-37048 Long tab 499 ea 72 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»CHASSIS REPAIR SPRINT H | FLOOR A | NERF AND BUMPER SPUDS PAN STRAP • 4130 chromoly • 4130 chromoly • Will fit any chassis • Will fit any chassis 1 916-37041 Front bumper and nerf $599 ea 2 916-37042 Rear bumper 699 ea 916-37040 3⁄16\" holes $699 ea 3 916-37043 Torque tube hoop 599 ea 946-12251 Short 999 ea Solid nerf spud 599 ea 946-12101 $499 ea J | STOP PAD 599 ea B | 4130 CHROMOLY MATERIAL • Flat contact surface for bolt • Make repair easier • Contoured to tube • Pre-cut tubes • Available in 2' or 4' lengths 916-37053 946-12266 Wide pad 916-37093-2 2' - 1\" x .049 wall $999 ea 916-37093-4 4' - 1\" x .049 wall 1999 ea K | FRONT CROSSMEMBERS 916-37094-2 1299 ea 916-37094-4 2' - 1\" x .065 wall 1999 ea • Sized to fit the most popular brands 916-37095-2 4' - 1\" x .065 wall 1499 ea 916-37095-4 2499 ea 2' - 1.25\" x .065 wall 4' - 1.25\" x .065 wall • Tubes are 1\" diameter 4130 chromoly C | TOP WING TABS • Choose \"X\" configuration as a factory replacement • 4130 chromoly 916-37084 'X' member (unassembled) $3999 kit 1 916-37050 3⁄8\" hole - wing tree $299 ea 916-37088 Radiator 'V' 1999 ea 2 916-37051 5⁄16\" hole - wing tree 399 ea 946-11232 Short “X” member 7499 ea 3 916-37052 1⁄4\" hole - wing cylinder 399 ea L | FRONT MOTOR TABS D | NOSE WING TABS • Mounts to shock spud on tower 1/4\" hole, 1\" length from cope to hole center 916-37055 RF bent tab $499 ea 916-37056 LF bent tab 499 ea 916-37049 $399 ea 916-37057 Straight tab 399 ea 940-901 Flex tabs w/ E | SHOCK TOWERS 940-138 bushings 2799 pr 916-37030 Universal (shown) $4999 ea 946-12504 Upper motor 499 ea 940-3761 Adjustable (set of 2) 22999 pr 946-12506 499 ea 940-3762-SIDE Adjustable (single) 11499 ea 499 ea F | RADIATOR MOUNTING BRACKET M | AERO SPUD GUSSETS • Standard hole size and spacing • Formed and fit for bracing shock and 916-37044 Speedway (shown) $699 ea wing spuds 940-136-SIDE Eagle 799 ea 946-22004-SIDE Schnee 999 ea 1 916-37037 Top wing spud $399 ea Small top 2 916-37038 wing spud 399 ea G | JACOBS LADDER TABS 399 ea 3 916-37039 Front axle spud • Standard or 2-hole positions available with 940-130 Wing spud gusset 699 ea 4 940-133 Wing spud 1999 ea factory locations 1 916-37072 Std. upper $299 ea N | COIL MOUNT BRACKET 2 916-37073 2-hole upper 399 ea 3 916-37074 Std. lower 299 ea • Eliminate stress to your dash by welding 4 916-37075 2-hole lower 399 ea this bracket to your motorplate upright 916-37018 Upper tab spud 999 ea 1\" 1\" • Slotted 3/8\" coil mounting holes 73 916-37083 $499 ea 916-37022 Ladder gusset 499 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT 74 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»AFCO SHOCKS SPRINT A | 16 SERIES TWIN-TUBE SMALL BODY REBOUND ADJUSTABLE ALUMINUM SHOCKS • Re-buildable and repairable • Twin-tube design for traction in the slickest of track conditions • Rebound adjustments won’t affect compression • Shim stack technology in a lightweight, small body design 106-SPECIFY Afco 16 Series Aluminum Small Body Rebound Adj. Smooth Body Starting at $32099 ea 106-16A-SPECIFY Custom Afco 16 Series Aluminum Small Body Adj. 31999 ea 106-20150 Remote cockpit adjuster 9599 ea 6\" STROKE – 7\" STROKE – 8\" STROKE – 9\" STROKE – 106-SPECIFY 106-SPECIFY 106-SPECIFY 106-SPECIFY PART # COMP. REBOUND PART # COMP. REBOUND PART # COMP. REBOUND PART # COMP. REBOUND 166225S 2 2-5 167225S 2 2-5 168248S 2 4-8 169225S 2 2-5 166236S 2 3-6 167236S 2 3-6 168348S 3 4-8 169236S 166248S 2 4-8 167248S 2 4-8 168448S 4 4-8 169248S 2 3-6 166325S 3 2-5 167325S 3 2-5 168548S 5 4-8 169325S 2 4-8 166336S 3 3-6 167336S 3 3-6 COMP. LENGTH 13.60\" 169336S 3 2-5 166348S 3 4-8 167348S 3 4-8 EXT. LENGTH 21.60\" 169348S 3 3-6 166425S 4 2-5 167425S 4 2-5 169425S 3 4-8 166436S 4 3-6 167436S 4 3-6 169436S 4 2-5 166448S 4 4-8 167448S 4 4-8 169448S 4 3-6 166525S 5 2-5 167525S 5 2-5 169525S 4 4-8 166536S 5 3-6 167536S 5 3-6 169536S 5 2-5 166548S 5 4-8 167548S 5 4-8 169548S 5 3-6 COMP. LENGTH 11.60\" COMP. LENGTH 12.60\" 5 4-8 COMP. LENGTH 14.60\" EXT. LENGTH 17.60\" EXT. LENGTH 19.60\" EXT. LENGTH 23.60\" B | 16 SERIES TWIN-TUBE SMALL BODY Custom Valving Available ALUMINUM SHOCKS • Rebound adjustments won’t affect compression • Custom valving available, 1.68” O.D. • Twin-tube design for traction in the slickest of track conditions • Re-buildable and repairable • Shim stack technology in a lightweight, small body design 106-SPECIFY Afco 16 Series Aluminum Small Body Non-Adj. Smooth Body Starting at $20299 ea 106-16-SPECIFY Custom Afco 16 Series Aluminum Small Body Non-Adj. 22299 ea 6\" STROKE – 7\" STROKE – 8\" STROKE – 9\" STROKE – 106-SPECIFY 106-SPECIFY 106-SPECIFY 106-SPECIFY PART # COMP. REBOUND PART # COMP. REBOUND PART # COMP. REBOUND PART # COMP. REBOUND 1661S 1 1 1671S 1 1 16813S 1 3 1691S 11 16613S 1 3 16713S 1 3 1682S 2 2 16913S 1662S 2 2 1672S 2 2 16821S 2 1 1692S 13 166205S 2 0.5 16721S 2 1 16824S 2 4 16921S 22 16621S 2 1 16724S 2 4 1683S 3 3 16924S 21 16624S 2 4 1673S 3 3 16831S 3 1 1693S 24 1663S 3 3 16731S 3 1 16835S 3 5 16931S 33 16631S 3 1 16735S 3 5 16836S 3 6 16935S 31 16635S 3 5 1674S 4 4 1684S 4 4 16936S 35 1664S 4 4 16745S 4 5 16845S 4 5 1694S 36 16645S 4 5 16746S 4 6 16846S 4 6 16945S 44 16646S 4 6 1675S 5 5 1685S 5 5 16946S 45 1665S 5 5 16753S 5 3 16853S 5 3 1695S 46 16653S 5 3 COMP. LENGTH 12.50\" COMP. LENGTH 13.50\" 16953S 55 EXT. LENGTH 19.50\" EXT. LENGTH 21.50\" 53 COMP. LENGTH 11.50\" COMP. LENGTH 14.50\" EXT. LENGTH 17.50\" EXT. LENGTH 23.50\" D | CARBON FIBER C | PREMIUM $2139 ea SHOCK PROTECTORS $3199 ea SHOCK OIL 75 • Protect shocks from debris with durable and 4299 ea 106-MT59506 1 quart lightweight guards • Installation is simple; the snap fit design hugs the shock body for secure placement, no tools needed 106-203793 Small body shock 106-203794 Large body shock SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT AFCO SHOCKS E | PROGRESSIVE $12499 ea BUMP KIT 22499 ea • Kits available in 26 piece full kit or 15 piece half kit • Instruction sheet included • For shafts sizes ½” or 9⁄16” 940-2600-SIZE 940-2601-SIZE A | RACE CAR F | PRESSURE DECAL KIT HAULING SHOCKS • Great way to determine how hard your getting into the bump rubber • Replaces shocks when hauling your car to the track 940-2603 $4999 ea • Saves wear and tear on suspension components $6999 set • Fits ½” mounts 6499 set • Save buying 2 sets 940-36037 940-36037-QTY BUY 2 SETS AND SAVE B | SMALL BODY G | SHOCK COVERS ROD ENDS • Easily snaps on and off • Use these factory replacements to rebuild or optimize the extended • Built specifically to protect CSI shocks length of small body shocks 1 940-71000 Carbon fiber gas shock protector $4599 ea 106-550149110 1\" extended $4299 ea 2 940-70000 Carbon fiber twin-tube shock protector 3999 ea 106-550165101 For coil-over 4299 ea 3 940-72000 Poly-twin-tube shock cover 1299 ea 106-550000103 With adjustor 9499 ea Poly-twin-tube shock cover 4999 4/pk 940-72100 C | BIG BODY H | BUMP RUBBER CUP ROD ENDS • Works with CSI and AFCO adjustable shocks, • Factory replacements to rebuild not running springs or optimize the extended lengths of big body shocks • Overall height is 3”, diameter big end is 2.5”, diameter small end is 2.04”, I.D. is 2.09” 106-20176 Standard $3699 ea 940-55500 Small body $4999 ea 106-201761 1\" extended 4799 ea 940-55600 Big body 4999 ea 106-201762 2\" extended 4799 ea 106-10243SR Clip 499 ea J | COCKPIT ADJUSTER ASSEMBLY D | SHOCK REBUILD • Available in 3, 4, 5 or 6 foot lengths ACCESSORIES 940-20010 Handle $5999 ea 940-2090-SIZE Cable v 4999 ea 940-55150 1/2\" packer kit $2499 kit 940-200350 999 ea 940-555250 9/16\" packer kit 2499 kit Adjuster adapter 76 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»SHOCKS SPRINT D | AFCO 16 SERIES A | PRO RED TOP NON ADJUSTABLE • Small body, twin tube construction enhances driver feel • Redesigned valve body for more repeatability and tune-ability • Deflective disk construction promotes at the race track consistency and long term reliability • The 2 piece valve body improves serviceability of • Adjustable shocks feature completely independent seals and reliability of internal components adjustments and have a positive detent position • A proven, no-leak sealing system 940-16600 Set of 8 Non Adj. AFCO 16 series $167999 set 940-A800 Set of 8 Non Adj. PRO 159999 set 940-16721 RF Heavy 16 Series AFCO Shock 22999 ea 940-A721 RF Heavy PRO Shock 22999 ea 940-16722 RF Slick 16 Series AFCO Shock 22999 ea 940-A722 RF Slick PRO Shock 22999 ea 940-16711 LF Heavy 16 Series AFCO Shock 22999 ea 940-A711 LF Heavy PRO Shock 22999 ea 940-16712 LF Slick 16 Series AFCO Shock 22999 ea 940-A712 LF Slick PRO Shock 22999 ea 940-16831 LR Heavy 16 Series AFCO Shock 22999 ea 940-A831 LR Heavy PRO Shock 22999 ea 940-16832 LR Slick 16 Series AFCO Shock 22999 ea 940-A832 LR Slick PRO Shock 22999 ea 940-16941 RR Heavy 16 Series AFCO Shock 22999 ea 940-A941 RR Heavy PRO Shock 22999 ea 940-16942 RR Slick 16 Series AFCO Shock 22999 ea 940-A942 RR Slick PRO Shock 22999 ea 940-16606 122499 set 940-16071 Set of 4 custom valve 16 series shocks 33999 ea 940-16072 LF rebound adjustable 33999 ea 940-16083 RF rebound adjustable 33999 ea 940-16094 LR rebound adjustable 33999 ea RR rebound adjustable E | AFCO 63 SERIES B | TWIN TUBE A1 SERIES SINGLE ADJUSTABLE • Base valve designed and engineered to maximize low speed control and grip • New valve body with 32 click for fine adjustment • Low speed adjustable for ultimate driver feel • Features a low friction, high temperature sealing system • New steel billet piston design for • 1⁄2\" shaft with minimal rod pressure internal sealing and endurance gain to maximize grip • Individually dynoed and serial numbered 940-A1R400 Set of 4 Rebound Adj. PRO 132999 set 940-A1R72 RF Rebound Adj. PRO Shock 36999 ea 940-A1R71 LF Rebound Adj. PRO Shock 36999 ea 940-A1R83 LR Rebound Adj. PRO Shock 36999 ea 940-A1R94 RR Rebound Adj. PRO Shock 36999 ea 940-63000 Set of 4 Rebound Adj. AFCO 63 Series 159999 set 940-63062 RF Rebound Adj. AFCO 63 Series Shock 41999 ea 940-63061 LF Rebound Adj. AFCO 63 Series Shock 41999 ea 940-63073 LR Rebound Adj. AFCO 63 Series Shock 41999 ea 940-63084 RR Rebound Adj. AFCO 63 Series Shock 41999 ea 940-63085 RR Compression Adj. AFCO 63 Series Shock 41999 ea F | BIG BODY REBOUND C | PRO GAS ADJUSTABLE ADJUSTABLE • Independent rebound bleed circuit • Piston and base valve designed • Friction reduction CSI \"Gold\" shaft coating to optimize hysteresis, improved car response • Premium steel race spherical bearing • Extensive research and development to optimize internal pressure balances, increase stability and provide maximum grip • Precision machined to increase weight reduction 940-RS15LT-7-Y RF CSI Big Body Rebound Adj. RS-15LT 46999 ea 582-GA400 Set of 4 Rebound Adj. PRO Gas 189999 set 940-RS15LT-6-Y LF CSI Big Body Rebound Adj. RS-15LT 46999 ea 582-GA062 RF Rebound Adj. PRO Gas Shock 49999 ea 940-RS15LT-8-Y LR CSI Big Body Rebound Adj. RS-15LT 46999 ea 582-GA061 LF Rebound Adj. PRO Gas Shock 49999 ea 940-RS15LT-9-Y RR CSI Big Body Rebound Adj. RS-15LT 46999 ea 582-GA073 LR Rebound Adj. PRO Gas Shock 49999 ea 582-GA084 RR Rebound Adj. PRO Gas Shock 49999 ea 582-GA085 RR Compression Adj. PRO Gas Shock 49999 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 77 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT PRO SHOCKS A | ALUMINUM BODY SHOCKS C | ALUMINUM BODY SHOCKS • Serial numbered and dyno tested • Comes with a dyno graph 6\" SHAFT WITH BEARING LARGE AND SMALL BODY 9\" SHAFT WITH BEARING LARGE BODY 582SBA-SPECIFY Small body $20999 ea 582A-SPECIFY Large body 19999 ea 582A-SPECIFY $19999 ea LARGE BODY COMP REBOUND SMALL LARGE COMP REBOUND 929B 2 9 641B 641B 4 1 9210B 2 10 642B 642B 4 2 9211B 2 11 645B 645B 4 5 930B 3 3 646B 646B 4 6 935B 3 5 651B 651B 5 1 938B 3 8 652B 652B 5 2 939B 3 9 653B 653B 5 3 9310B 3 10 654B 654B 5 4 9311B 3 11 656B 656B 5 6 940B 4 4 94.5B 4.5 4.5 7\" SHAFT WITH BEARING LARGE AND SMALL BODY E | ADJUSTABLE 943B 4 3 945B 4 5 582SBA-SPECIFY Small body $19999 ea SHOCKS 946B 4 6 582A-SPECIFY Large body 19999 ea RED TOP ADJ $43999 ea 947B 4 7 948B 4 8 SMALL LARGE COMP REBOUND PART# COMP REB 949B 4 9 - 730B 3 3 6 INCH 950B 5 5 74B 740B 4 4 Reb. adjustable 953B 5 3 741B 741B 4 1 582-G64-A6D LF 4 comp digressive piston 956B 5 6 742B - 4 2 957B 5 7 745B 745B 4 5 582-G65-A6D LF 5 comp Reb. adjustable 960B 6 6 746B 746B 4 6 digressive piston 75B 750B 5 5 8\" SHAFT WITH BEARING LARGE BODY 751B 751B 5 1 582G65-A5.5D RF 5 comp Reb. adjustable 752B 752B 5 2 582-G6ARD digressive piston 753B 753B 5 3 582-G6ACD 582A-SPECIFY $19999 ea 754B 754B 5 4 6\" Custom Reb. Reb. adjustable 756B 756B 5 6 LARGE BODY COMP REBOUND 757B 757B 5 7 6\" Custom Comp Comp. adjustable 829B 2 9 - 760B 6 6 8210B 2 10 764B 764B 6 4 REPLACES STANDARD 7\" STROKE TWIN-TUBE 8211B 2 11 - 770B 7 7 SHOCK. 12.68\" COMPRESSED 18.68\" EXTENDED 838B 3 8 - 791B 9 1 839B 3 9 7 INCH Reb. adjustable 8310B 3 10 digressive piston 8311B 3 11 582-G74-A6D LF 4 Comp 840B 4 4 845B 4 5 582-G75-A5D LF 5 Comp Reb. adjustable 84.5B 4.5 4.5 digressive piston 846B 4 6 847B 4 7 582-G75-A5.5D RF 5 Comp Reb. adjustable 848B 4 8 digressive piston 849B 4 9 850B 5 5 582-G74-A7.5D LR 7\"- 4 Comp Reb. adjustable 856B 5 6 digressive piston 860B 6 6 582-G74-A8D LR 7\"- 4 Comp Reb. adjustable digressive piston SAVE WEIGHT! IF YOU RUN THE SHOCKS IN THE 6\" BODY, YOUR 582-G74-A9D LR 7\"- 4 Comp Reb. adjustable SHOCK IS WORKING MORE IN THE MIDDLE OF ITS TRAVEL. digressive piston D | ALUMINUM BODY 582-G7ARD 7\" Custom Reb. Reb. adjustable SHOCKS 582-G7ACD digressive piston • All Ultimate II shocks are serial numbered 7\" Custom Comp Comp. adjustable and dyno tested REPLACES STANDARD 8\" STROKE TWIN-TUBE • Each aluminum Ultimate II shock comes with SHOCK. 13.68\" COMPRESSED 20.68\" EXTENDED a serial numbered dynograph 8 INCH Reb. adjustable digressive piston IMPORTANT: 6\" BODY, 7\" SHAFT WITH BEARINGS 582-G84-A7.5D LR 4 Comp B | SHOCK ENDS 582SBA-SPECIFY Small body $20999 ea 582-G84-A8D LR 4 Comp Reb. adjustable 582A-SPECIFY Large body 19999 ea digressive piston • Factory replacement eyelet • Steel or aluminum construction SMALL LARGE COMP REBOUND 582-G84-A9D LR 4 Comp Reb. adjustable • Large and small body 64B7 64B7 4 4 digressive piston • Available in gold or black - 641B7 4 1 582-G85-A5.5D RR 5 Comp Reb. adjustable - 646B7 4 6 582-G8A6.5-5D RR 5 Reb. Comp adjustable 1 582-200 Large body - gold $1999 ea 65B7 65B7 5 5 582-G8ARD 8\" Custom Reb. Reb. adjustable 582-2201 Large body - black 1899 ea - 653B7 5 3 582-G8ACD 8\" Custom Comp Comp adjustable 582-53420 Large body +1\" - gold 2299 ea - 654B7 5 4 582-53421 Large body +1\" - black 1899 ea 664B7 664B7 6 4 REPLACES STANDARD 9\" STROKE TWIN-TUBE Small body - gold 1599 ea SHOCK. 14.38\" COMPRESSED 22.68\" EXTENDED 2 582-275 78 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»PRO SHOCKS SPRINT B | TWIN TUBE A2 SERIES DOUBLE REBOUND ADJUSTABLE • Independent high and low speed rebound adjustability • 32 click for low speed adjustment and 40 clicks for high speed adjustment • Low speed adjustable for ultimate driver feel • New steel billet piston design for internal sealing and endurance • Fluid recirculation system to balance internal pressures and give the ultimate in drive feel • Individually dynoed and serial numbered 582-A2XXXX $49999 ea A | TWIN TUBE A1 SERIES SINGLE ADJUSTABLE • New valve body with 32 click for fine adjustment LENGTH COMP REBOUND • Low speed adjustable for ultimate driver feel FRONT 4 3-7 • New steel billet piston design for internal sealing and endurance 6 5 3-7 • Individually dynoed and serial numbered 6 4 3-7 7 5 3-7 582-A1XXXX $34999 ea 7 6 3-7 7 LENGTH COMP REBOUND LEFT REAR FRONT 8 3 3-7 6 4 4-7 8 4 3-7 6 5 4-7 8 5 3-7 7 4 4-7 8 6 3-7 7 5 4-7 8 3 6-11 LEFT REAR 4 4-7 8 4 6-11 8 5 4-7 8 5 6-11 8 4 6-9 RIGHT REAR 3 6-9 9 8 5 6-9 9 3 6-11 8 3 4-7 9 4 6-11 8 4 4-7 9 5 6-11 RIGHT REAR 5 4-7 9 3 3-7 9 6 4-7 9 4 3-7 9 9 5 3-7 9 6 3-7 9 Let the Experts at Speedway Motors Rebuild, Tune and Dyno Test Your Racing Shocks! Same Day Service Available! 800.979.0122 Shock Service Includes: Precision Dyno Testing: • Shock disassembly and cleaning • Non-adjustable: $10 per shock • Thorough inspection of all parts • Double adjustable : $15 and Up • New factory oil for all shocks serviced • Roehrig Dynos • Dyno test to verify performance Coil Spring Rating Available SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 79 SpeedwayMotors.comANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT BUMP STOPS/ADJUSTERS A | BUMP RUBBER F | COCKPIT REMOTE SHOCK 570-BR28 Red - soft $1999 ea ADJUSTERS 570-BR32 White - medium 1999 ea 570-BR38 Black - hard 1999 ea CSI 106-20173 AFCO aluminum cover 1999 ea 940-20500-LENGTH 3', 4', 5' or 6' complete assembly $9499 kit 940-20010 Handle 5999 ea B | SPEEDTHANE 940-20900 Cable 4999 ea BUMP RUBBER 940-200350 Adjuster adapter 999 ea AFCO 106-20150 Adjuster $9599 ea 106-A550040022X Cockpit adjuster adapter 999 ea 21⁄4\" Red - soft $2699 ea G | BUMP STOP DIVIDER $999 ea 106-223527 Natural - medium 2699 ea 999 ea 106-223533 Blue - hard 2699 ea • Adjustable with flat, 5°, 10° or 15° washers to adjust the 106-223539 progression of the bump stop 3\" Red - soft $2699 ea 106-223541 Natural - medium 2699 ea 1 910-45705-SIZE 1/2\" Shaft divider 106-223550 Blue - hard 2699 ea 2 910-45715-SIZE 5/8\" Shaft divider 106-223559 C | BUMP STOP KITS H | BUMP RUBBERS • Kits include everything you need to • In 60, 70, or 80 durometer set-up and tune your bump stops for • In ½” or 1” thick and stackable changing track conditions 1 910-45710-SIZE 5/8\" Shaft bump stop $1899 ea • Choose from .500” (1/2” shaft), .562”, 2 910-45700-SIZE 1/2\" Shaft bump stop 1899 ea .625” or 15mm hole diameters 940-1776-SIZE Winged sprint single $17499 ea bump stop kit (shown) 29999 ea 940-1777-SIZE Winged sprint double bump stop kit J | PENSKE SHOCK RESERVOIR MOUNT • Choose 1\", 11/4\", 11/2\" or 13/4\" tubing size 1 570-138-SIZE Reservoir mount $3999 ea 570-152 Quick knob 798 ea Sweep tool 2 570-7999 2499 ea $3999 ea D | HIGH PRESSURE $10499 ea K | SHOCK CUPS SHOCK TOOLS 10699 ea 3999 ea 54599 ea • 3.375”, fits PRO and AFCO large 3999 ea 1 570-7990 Penske body shocks 3999 ea 2 106-20109 AFCO 3 300-100675 Intercomp digital • Holds rubber secure for rate 699 ea 4999 ea consistency • Conceals your tuned stack 499 ea • 1.250\" hex replaces jam nut E | GAS PRESSURE 1 916-2010 9⁄16\" - 18 GAUGE FOR PGA 916-2011 7⁄16\" - 20 582-GAUGE 916-2012 1⁄2\" - 20 $7699 ea 916-2013 12 mm - 1.25 916-2015 Washer CSI bump rubber cup 2 940-55500 Clip 106-10243SR 80 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»SHOCK REBUILD ACCESSORIES SPRINT G | RICOCHET $2999 ea A | SHOCKWEARS SHOCK GUARD ARMOR PROTECTORS • Protects shock • Premium cover that will protect shocks and 25/8\" coils • Fits most length of shocks • Flexible armor plated material • Sold individually • Adjustable Velcro closure 910-45725 • Vented to release heat • Available in 14”, 17”, 19” and 21” lengths $3599 ea 564-2601-SIZE H | SHOCK OIL B | BLUE COIL-OVER SHOCK COVERS • Superior damping • Controls heat • Full-size coil-over 25/8 \" cover • Lower operating temperatures • Excellent thermal stability 106-OWSCR14 14\" $3699 ea • Contains special anti-wear and lubricity agents 106-OWSCR19 19\" 3699 ea • Excellent for high performance and heavy-duty 106-OWSCR21 21\" 3699 ea applications 484-104881 $2799 ea C | SHOCKWEAR ARMOR • For non-coil-over shocks • Flexible armor plated material protects against mud and debris • Will deflect heat allowing shock to run cooler 564-2878 6 & 7\" Stroke shocks $3599 ea 564-2877 8 & 9\" Stroke shocks 3599 ea J | SHOCK VISE BRACKET D | BUMP RUBBER COVER INCLUDED • A must have for rebuilding and revalving shocks • Made from Armor Fabric this covers are made to last 106-20113 $29999 ea • The securely wrap around your bump rubber stack and fasten using industrial strength Velcro $4999 ea • Comes two to a pack 940-2602 E | STEEL SHOCK EXTENSIONS K | SHOCK REBUILD KITS STEEL Pro -1\" small body 1⁄2\"-20 $1999 pr 391-7481 Pro - 2\" small body 1⁄2\"-20 1999 pr 106-MTTTSB Main shims $27799 ea 391-7482 Bilstein -1\" M12 - 1.0 metric 1999 pr 106-TTBVAC Base/bleed shims 32099 ea 391-7483 Bilstein -2\" M12 - 1.0 metric 1999 pr 106-TTJETKIT Main jets 19299 ea 391-7484 AFCO/Pro - 1\" 1100/1300 R series/Pro big body 1599 ea 106-20180 AFCO/Pro - 2\" 1100/1300 R series/Pro big body 2139 ea 106-201801 F | LARGE BODY SHOCK TUNING KIT L | SHOCK WRENCH • For FC, 50, 51, 60 and 62 Series • CNC machined aluminum shocks • Extra long handles for maximum leverage • Choose for shock brand and size • Includes two pistons, seal kits, 0-5 base valve 916-1005 AFCO big body, 63 and 64 series 5999 ea 721-TK01 QA1 $14999 kit SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 81 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT SHOCK MOUNT KITS 4\" TALL 4\" TALL USE WHERE 47⁄8\" RULES APPLY 47⁄8\" 31⁄8\" 31⁄8\" A | STEEL SHOCK MOUNT KITS 940-1152 One nut style, 24-piece Eagle/Maxim $7999 kit 940-1153 One nut style, 24-piece Eagle 7999 kit B | TITANIUM SHOCK MOUNT KITS J | ALUMINUM SHOCK 940-1052 One nut style, 24-piece Eagle/Maxim $11999 kit MOUNT KITS 940-1053 One nut style, 24-piece Eagle (shown) 12499 kit 940-1252 One nut style, 24-piece Eagle/Maxim $4999 kit 940-1055 Quick release pin style, 32-piece Eagle/Maxim 11999 kit 940-1253 4999 kit 940-1056 Quick release pin style, 32-piece Eagle 13499 kit One nut style, 24-piece Eagle 4999 kit 940-1056M Quick release pin style, 32-piece Maxim 13499 kit 940-1253M One nut style, 24-piece Maxim 6499 kit 940-1065 Through bolt Maxim, 18-piece 12999 kit 940-1255 5499 kit 940-1067 Through bolt Eagle, 18-piece 12999 kit 940-1256 Quick release pin style, 32-piece Eagle/Maxim 5999 kit Quick release pin style, 32-piece Eagle (shown) .600\" 940-1256M Quick release pin style, 32-piece Maxim $1699 ea 999 ea C | LOWER SHOCK 3.125\" K | SHOCK 2.750\" 799 ea MOUNT-ONE NUT $1599 ea MOUNT 4.00\" 999 ea 4.00\" $1799 ea 799 ea ONE NUT 999 ea 940-1053A Titanium .600\" 940-1053C Titanium $1699 ea 940-1153A Steel 940-1153C Steel 799 ea 940-1253A Aluminum 940-1253C Aluminum $2299 ea L | SHOCK 2.700\" 999 ea MOUNT 4.00\" D | LOWER SHOCK 4.00\" $199 ea MOUNT-QUICK QUICK 299 4/pk RELEASE 3.125\" RELEASE 2.100\" 940-1056A Titanium $1399 ea 940-1056C Titanium 940-1256A Aluminum 799 ea 940-1256C Aluminum M | LOWER 2.125\" SHOCK MOUNT 3.38\" E | SHOCK MOUNT 3.38\" QUICK 3.630\" 3.38\" ONE NUT 3.38\" RELEASE 4.88\" 3.630\" 940-1053B Titanium $1599 ea 940-1056B Titanium 940-1153B Steel 999 ea 940-1256B Aluminum 940-1253B Aluminum 799 ea N | SHOCK F | SHOCK MOUNT 4.88\" $1999 ea MOUNT 4.88\" ONE NUT 999 ea 4.88\" QUICK 999 ea RELEASE 940-1053D Titanium 940-1056D Titanium 940-1153D Steel 940-1256D Aluminum 940-1253D Aluminum P | RUE CLIP FOR QUICK RELEASE G | 1/2\"-20 NYLOCK 940-1001 $0.99 ea HALF NUTS 940-1002 3⁄8\" 0.99 ea 1⁄2\" 940-04240 Aluminum $3199 25/bag 940-04242 Black steel (shown) 1399 25/bag 940-04140 Zinc steel 999 50/bag Q | ALUMINUM SHOCK SPACER • .96\" long, 1\" O.D. 940-37030 Spacer $499 ea 940-5825 1⁄2\"-20 x 2.5 Ti bolt 1099 ea H | 12 PT. 940-199 Ti shock nut 699 ea FLARE NUTS R | 1/2\" X .200 ALUMINUM SHOCK SPACER 1 940-11115 Speedway - steel 3⁄8\" - 16 headers torque tube $899 7/bag 2 940-11117 Speedway - steel 1⁄2\" - 20 radius rod to birdcage 499 2/bag 940-1000 Aluminum (shown) 940-115 Ti64 - Titanium 3⁄8\" - 24 4199 8/bag 940-1094 Plastic 82 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»MASTER CYLINDERS SPRINT F | COMPACT A | REMOTE RESERVOIR MASTER CYLINDER MASTER CYLINDER • External return spring maintains positive pedal feel and helps prolong pad life by • Only 3.73” long from where it mounts to the fitting boss ensuring quick reaction to released pedal force • Same two bolt mounting flange as other models • Slim design rubber boot allows easy installation into most pedal assemblies • Now features a heavy internal return spring • Common dual-mounting bolt patterns for most racing applications • Includes a large and small reservoir, hose and hardware • Available in 3/4\", 7/8” and 1” bore • Designed for standard 1/8\" NPT fittings for easy replacement for remote mounting if needed • 1/8\" NPT outlet • Aluminum bore design with hard anodized piston • Available in 5/8\", 3/4\", 13/16\", 7/8\", 1\" and 11/8\" bores 835-260103-SIZE 1⁄8\" NPT outlet $8399 ea 106-6620110 Master cylinder 3⁄4\" remote reservoir $4999 ea 106-6620111 Master cylinder 7⁄8\" remote reservoir 4999 ea 106-6620112 Master cylinder 1\" remote reservoir 5499 ea G | KNOB STYLE PROPORTIONING VALVES B | ALUMINUM MASTER CYLINDERS • Allows easy adjustments of front-to-rear brake bias • Die-cast housing allows a better finish in the bore • Universal design works on all race cars • Less porosity and more accurate casting • 100 to 1500 psi range • Includes internal return spring and baffles to decrease sloshing • 1/8\" NPT • 3/4\", 7/8\", 1\" bore available • 1/8\" NPT single outlet 1 835-2608419 Wilwood $4199 ea 2 910-31353 Speedway - purple 3499 ea 835-260676-SIZE Master cylinder $5396 ea 3 910-31354 Speedway - polished 3999 ea 835-2606-SIZE 3199 kit Rebuild kit H | ALUMINUM M/C ROD END $799 ea C | UNIVERSAL MASTER CYLINDERS 499 6/pk 117-0720 Rod end 5⁄16\" - 24 RH female • 3/8\" x 24 single outlet 315-9596 Jam nuts • Comes with both large and small reservoirs • Reservoirs can be direct or remote mounted • Available in 5/8\", 3/4\", 7/8\", 13/16\", 1\" and 11/8\" bores J | MASTER 701-74-SIZE Master cylinder $8099 ea CYLINDER 835-26010500 Replacement remote reservoir kit 3299 ea RETURN SPRING KIT 701-74K-SIZE Rebuild kit 2599 ea • Helps keep the driver from $1999 ea D | ALUMINUM MASTER CYLINDER $5499 ea burning up the brakes 2999 ea • External return spring for positive feel and helps prolong pad life 2999 ea 940-2400 • Slim design rubber boot allows easy installation 2999 ea • Aluminum bore with hard anodized pistons K | RATCHET STYLE • Built-in fill tabs are easy to read in dark pit areas $8399 ea PROPORTIONING VALVE • Common dual-mounting bolt patterns for most 8399 ea 8399 ea • Six preset positions racing applications • 1/8\" NPT outlet 8399 ea • Available in 3/4\", 7/8\" and 1\" bores 8399 ea • Aluminum body 106-662-SIZE Master cylinder- 1⁄8\" NPT outlet 83 • Allows quick and accurate adjustment of brake bias 106-20111512K 106-20111514K Rebuild kit - 3⁄4\" bore 835-2608420 $8399 ea 106-20111516K Rebuild kit - 7⁄8\" bore Rebuild kit - 1\" bore L | ADJUSTABLE 15⁄8\" E | SIDE MOUNT MASTER CYLINDERS PROPORTIONING • Designed for limited space applications with the output VALVE 2\" of a full-size master cylinder • Very compact • The ultra short 3.37\" body with a 1.12\" of piston stroke • Incorporates integral side mounting lugs • Available in 3/4\", 7/8\", 13/16\", 1\" and 11/8\" bores • Can be hidden in cars that don't allow adjustable 835-26012385 Short remote side mount kit - 3⁄4\" bore proportioning valves 835-26012386 Short remote side mount kit - 13⁄16\" bore 835-26012387 Short remote side mount kit - 7⁄8\" bore • 1/8\" NPT 835-26012388 Short remote side mount kit - 1\" bore 835-26012389 Short remote side mount kit - 1 1⁄8\" bore 910-31357 $3499 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT BRAKE LINES A | KEVLAR BRAKE LINES L | AN 2 BRAKE LINES • Aluminum ends • Compliment AN 2 brake line kit by 910-31812-3 12\" brake line - AN 3 completing with system with AN 2 caliper 910-31812-4 12\" brake line - AN 4 $1299 ea lines with AN 3 fittings 1299 ea 910-31818-3 18\" brake line - AN 3 1499 ea F | STEEL 910-31818-4 18\" brake line - AN 4 1499 ea BRAIDED LINES 940-31812-8 8\" straight to straight $3799 ea 910-31822-3 22\" brake line - AN 3 1699 ea 940-31812-10 10\" straight to straight 3799 ea 910-31822-4 22\" brake line - AN 4 1699 ea • With 90° fitting on one end 940-31812-12 12\" straight to straight 3899 ea • AN 3 or AN 4 fittings 910-31824-3 24\" brake line - AN 3 1699 ea 910-31897-SIZE 12\" $1399 ea 940-31812-14 14\" straight to straight 3999 ea 910-31824-4 24\" brake line - AN 4 1699 ea 910-31898-SIZE 15\" 1499 ea 940-31812-16 16\" straight to straight 4099 ea 910-31829-3 30\" brake line - AN 3 1899 ea 910-31892-SIZE 19\" 1499 ea 940-31812-18 18\" straight to straight 4199 ea 910-31893-SIZE 1599 ea 940-31812-20 4299 ea 910-31829-4 30\" brake line - AN 4 1899 ea 910-31894-SIZE 26\" 1799 ea 940-31812-24 20\" straight to straight 4499 ea 910-31834-3 34\" brake line - AN 3 1999 ea 910-31895-SIZE 36\" 1899 ea 940-31824 24\" straight to straight 4999 ea 910-31834-4 34\" brake line - AN 4 1999 ea 48\" 24\" 90º to straight 910-31838-3 38\" brake line - AN 3 2099 ea 910-31838-4 38\" brake line - AN 4 2099 ea 910-31848-3 48\" brake line - AN 3 2299 ea 910-31848-4 48\" brake line - AN 4 2299 ea B | AN2 BRAKE LINE KITS G | STEEL BRAIDED LINE • Simply zip-tie this Sprint car AN2 soft • Straight AN 3 or AN 4 fittings on line system in place of your hard-line both ends for brakes and gauges to increase brake pressure, eliminate threaded joints, and add durability. A 910-31841-SIZE 6\" $999 ea M | G-LINK QUICK direct replacement consisting of AN3 910-31843-SIZE 8\" 999 ea DISCONNECT COUPLINGS female ends and black coated braided line 910-31842-SIZE 12\" 999 ea 910-31844-SIZE 18\" 946-17900 2 Wheel system w/-3 ends $15999 kit 910-31845-SIZE 1099 ea 1 940-1087 Female $12499 ea 946-17902 -3 complete kit 19999 kit 910-31846-SIZE 25\" 1199 ea 2 940-1088 Male 13999 ea 946-17904 2 wheel system w/banjo fitting 16999 kit 910-31847-SIZE 36\" 1299 ea 946-17906 48\" 1499 ea Banjo complete kit 20999 kit C | 37° TUBE H | 37° TUBE FLARING TOOL FLARING TOOL • The flaring tool you need to make • Makes clean, accurate flare every time the 37° flare so essential to • Simple and easy to use working with AN fittings 910-89520 37° Flaring tool $4099 ea • Standard brake and fuel lines are flared at 45° - which is not compatible with AN hardware $9799 ea J | LEVER TYPE TUBE BENDER • This tool makes a clean, accurate flare every time • Works on tubing from 3⁄16” to 5⁄8” • 10” handle gives plenty of 910-89528 37° Flaring tool - made in U.S.A leverage to make smooth, professional 5⁄8” radius bends in D | HEAVY DUTY RATCHETING 3⁄16” stainless or mild steel $8999 ea 37° FLARING TOOL brake line tubing • It has a ratcheting feed screw • The graduated scale of the hard that has a hardened flaring steel die permits accurate, cone supported by needle bearings repeatable bends time after time • Will put a 37° flare in 3⁄16”, 1⁄4”, 910-89527 5⁄16”, 3⁄8”, 1⁄2”, 5⁄8” and 3⁄4” tubing • Works great flaring 3⁄16” stainless steel brake line 910-89524 $14499 ea E | PRESSURE $4999 ea K | MINI TUBING BENDER $1499 ea BRAKE BLEEDER • Bends 1⁄8\", 3⁄16\" and 1⁄4\" tubing • Fits Wilwood screw-type up to 90 degrees and other manufacturers’ master cylinders • Use with brass, copper, steel or aluminum • Compact for limited accessibility applications 910-83891 Wilwood 728-51503 84 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
BRAKE LINE FITTINGS » SPRINT L | RESIDUAL F | FLARE BULKHEADS PRESSURE VALVES AND TEE ADAPTERS • For in-line use, 2 psi (disc.) FEMALE SWIVEL RUN TEE • 1/8\" NPT female 617-614403 AN 3 $1599 ea 1 835-26013706 2 psi 1⁄8\" NPT - Wilwood $1799 ea 617-614404 AN 4 1499 ea 2 910-31340 2 psi 1⁄8\" NPT male inlet 2999 ea 3 910-31345 2 psi 1⁄8\" NPT - Speedway 1499 ea FLARE PLUGS $399 ea A | QUICK 617-6017 AN 3 399 ea DISCONNECT FITTINGS 617-6018 AN 4 399 ea 617-6019 AN 6 • Chose Fitting Size: -03AN or -04AN • Both male and female fitting included SWIVEL COUPLERS 617-3998 AN 3 $799 ea 940-1082 Titanium $7999 ea 617-3999 AN 4 799 ea 940-1083 Aluminum 5999 ea 617-4000 AN 6 899 ea 617-4001 AN 8 999 ea B | MOTIVE 617-4002 AN 10 1199 ea PRODUCTS BLEEDER M | 90° AN TO NPT TUBE NUT COUPLERS CATCH AND SLEEVES ALLOW BOTTLE 617-4279 90° AN 3 to 1⁄8\" NPT - Steel $499 ea Tube Nut YOU TO ATTACH 324-962204 90° AN 4 to 1⁄8\" NPT - Steel 499 ea HARD LINE TO AN • Checks for air bubbles 617-8515 90° AN 3 to 1⁄8\" NPT - Tubing FITTING. YOU NEED • Contains the mess Stainless steel 1299 ea Tube Sleeve TO FLARE THE TUBE • Recycles clean fluid TO 37° TO MATCH 910-83893 37° Flared THE AN FITTINGS. $1499 ea Tube End (NOT 45°) G | ALLEN PIPE PLUG 617-6203 1⁄8\" $499 2/pk OPTIONAL SPEED BLEEDER SHOWN INSTALLED BRASS FITTINGS H | SLEEVES C | BLEEDER REPAIR KIT PART# AN TUBE PRICE 617-6063 3 3⁄16\" $599 6/pk 835-2200063 Bleeder kit 1⁄8\" NPT $299 ea 617-6064 599 6/pk 835-2200627 Set of four 1299 set N | NYLON BRAKE LINE KIT 4 1⁄4\" • 25 feet of line J | TUBE NUT COUPLERS • Includes all necessary fittings • 1/8\" NPT PART# AN TUBE PRICE 617-6055 3 3⁄16\" $699 6/pk 910-31896 Brake line kit $2999 kit 617-6056 4 1⁄4\" 699 6/pk 910-318960-10 Extra line - 10 ft. 1299 ea 910-318960-15 Extra line - 15 ft. 1899 ea PART# AN PIPE PRICE D | SPEED BLEEDER 910-318960-20 Extra line - 20 ft. 2499 ea 617-6041 3 1⁄8\" $499 ea 617-6042 4 1⁄8\" • Direct replacement for bleed P | BRASS PART# AN PIPE 499 ea screw-in caliper REPLACEMENT FITTINGS 617-6079 3 1⁄8\" PRICE 617-6080 4 1⁄8\" $899 ea • Makes brake bleeding a one $1499 pr • For nylon brake line kit shown above 617-4279 3 Steel 1⁄8\" 999 ea person operation 324-962204 4 Steel 1⁄8\" 499 ea Just crack loose bleeder, pump PART# AN PIPE 499 ea brakes, then close bleeder 617-6093 3 1⁄8\" PRICE 617-6094 4 1⁄8\" $899 ea • 1/4\"-28 617-4293 3 Steel 1⁄8\" 799 ea 324-962304 4 Steel 1⁄8\" 1099 ea 617-3954 399 ea 917-623 Union $399 ea PART# AN PIPE 917-643 T 399 ea 617-6110 3 1⁄8\" PRICE 917-6832 1⁄8\" pipe straight 399 ea 617-6111 4 1⁄8\" $1099 ea 917-6932 1⁄8\" pipe 90° 399 ea 917-603 Ferrule (10 pk) 499 ea 1199 ea PART# AN PIPE PRICE E | BRAKE LINE QUICK 617-4244 3 Steel 1⁄8\" $299 ea DISCONNECTS 324-961604 4 Steel 1⁄8\" 199 ea • Designed to be used with brake fluid, AN 3 ends Q | STEEL K | 90°AN ADAPTER 1 940-1073 Quick disc. brake coupler $15999 ea BRAKE LINE 2 940-1115 Steel - Male half 3699 ea $1499 ea PART# AN THREAD PRICE 3 940-1117 Steel - Female half 12499 ea • 20 ft. roll of steel 3⁄16” brake line 617-2060 3 3⁄8\"-24 $899 ea 910-31810 SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 85 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT FRONT BRAKE CALIPERS E | BRAKE MOUNTS K | SINGLE PISTON CALIPER • Floating caliper for 10\" rotor and 31/4\" spindle mount PART# STYLE SCPABALOCIPLINTEGR SCPEBINONTDLTELRE DIA. PRICE 940-31014 Single piston caliper $13999 ea 940-31015 Bracket 3999 ea 1 546-0179K3 Top 3.25\" 3.75\" 11\" $1699 ea 940-31017 Pad 2699 ea 2 546-0179K4 Front 3.25\" 4.25\" 11\" 1699 ea 940-31043 Heat shield 1299 ea A | RACING BRAKE FLUIDS 3 546-0179K9 Top 3.25\" 3.25\" 11\" 1699 ea 940-191625 O-ring 399 ea 4 546-0179K10 Top 3.25\" 3.25\" 10\" 1499 ea 106-6691903 AFCO - 16.9 oz $1999 ea 940-31023 Birdcage brake bracket 1999 ea 106-6691904 AFCO - case of 12 22499 box 1099 ea 835-2900632 Wilwood 570° F - 12 oz 1099 ea 940-6377 Ti 1⁄2\" x 2\" brake bolt 835-2906209 940-31090 Wilwood 600°+F - 16.9 oz 1899 ea 940-31091 1499 ea 910-125121 Ultra-Lite 12 oz 3499 ea Ultra-Lite quart 6999 ea Castrol - 1 liter L | FRONT BRACKET FOR FLOATING CALIPER - 3.25 F | DYNALITE SINGLE 940-31015 $3999 ea ALUMINUM CALIPER • Floating billet aluminum caliper 835-1202498 .25\" rotor $11699 ea M | ALUMINUM 835-1203277 .38\" rotor 11699 ea FRONT BRACKET CALIPER B | DYNAPRO CALIPERS G | BRAKE LINE GUARDS $1299 kit WILWOOD - SPEEDWAY • For 3.25\" spindles with 1299 kit • 1.75\" steel piston 916-41030 Steel $999 ea countersunk bolts 1499 kit 835-1209689 3.75\" mount $10099 ea ULTRA-LITE 1599 kit 835-12010188 3.25\" mount 10099 ea 940-3251 101⁄4\" rotor 940-3252 107⁄8\" rotor 940-3253 101⁄8\" rotor - black (shown) 940-3254 10.88\" rotor - black 835-13011789 Rebuild kit 2499 ea 940-4990 Carbon fiber (shown) $3499 ea H | WILWOOD GP320 FOUR N | BRAKE $499 ea PISTON CALIPER ROTOR 199 ea • For .235\" rotor, 3.50\" mount MOUNTS 399 ea 899 ea 546-179BK1 Spacer only 916-31951-1 Steel screw only 940-31018 Red Devil steel screw only 940-6383 Titanium screw only 835-1208524 Caliper $14999 ea 835-8596 Polymatrix Wilwood pads 11899 set C | DYNALITE SINGLE CALIPER P | INBOARD $1499 ea BRAKE • Lightweight, compact and strong PAD SHIMS • Two stainless steel 1.75\" pistons 835-1204062 Caliper $11599 ea 910-5657-SIZE .063\" or .120\" 916-41030 Brake line guard 999 ea J | FORGED ALUMINUM 835-13011789 Rebuild kit 2499 ea F11 BRAKE CALIPER 835-1803862 Retaining clips 4 pack 1199 ea • Less brake heat • Internal brake fluid passages Q | ALUMINUM • 13⁄4” Billet pistons with hard coat anodizing BRAKE PAD SPACER D | BOLT KIT FOR FRONT • 1⁄8” - 3⁄8” Rotors BRAKE BRACKET • 30% stiffer for better feel and less drag • Place plates between caliper piston and pad • Stainless steel abutment plates • Piston stays more firmly seated while using 835-2303356 Kit -2 bolts/washers $1299 kit 106-6630420 33⁄4” mounts $10999 ea the remainder of the pad surface 1099 ea 106-6630410 31⁄4” mounts 11999 ea 940-6377 1⁄2\"-20 x 2.00\" Ti bolt 940-31046-SIZE .050\" or .125\" $299 ea 86 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»BRAKE PADS SPRINT E | LEFT FRONT C | LEFT A | LEFT FRONT BRAKE KITS STEEL BRAKE KIT FRONT • High quality kit at affordable pricing BRAKE • Includes Wilwood Dynalite caliper • Dynapro single caliper KITS • Aluminum 107/8\" rotor Nickel plated 910-31960 WithSpeedwayrotor(shown) $15999 kit • 10\" titanium rotor, 910-31965 With Wilwood rotor 17999 kit • 11” scalloped steel drilled round or scalloped rotor $23299 kit • Left front single- • Includes bracket, bolts, piston caliper, left front and pads brake bracket 835-14012957 • 31/4\" mount • Pads for ceramic coated rotors 940-31020 10\" Round rotor $67499 kit 940-31120 10\" Round - Black caliper 61999 kit 940-31022 10\" Scalloped (shown) 61999 kit 940-31122 10\" Scalloped - Black caliper 61999 kit 940-4990 Carbon fiber brake line guard 3499 ea 940-31018 Red Devil steel screw only 399 ea F | SINGLE LEFT D | ALUMINUM B | STAINLESS LEFT FRONT BRAKE KIT LEFT FRONT FRONT ROTOR KIT BRAKE KIT • 11\" rotor diameter • Increases braking and adds durability • LH side • Dynapro single caliper Nickel plated • Includes 3.25\" spindle mount • Slotted titanium construction • 10.95 aluminum drilled rotor • 4-piston caliper 835-14014270 • Includes bracket, bolts, and pads 835-10798 $47299 ea $78199 ea 835-15014362K High temp brake pads 11199 4 pads 835-14012956 $21299 kit G | AFCO FRONT ALUMINUM ROTORS PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 106-6640129 Front 0.312\" 10.875\" 3 5\" Thru 2.2 lbs. Alum. drilled $9999 ea 106-6640131 Front 0.312\" 10.125\" 3 5\" Thru 2.2 lbs. Alum. drilled 9999 ea 106-6640129 H | WILWOOD FRONT ALUMINUM ROTORS PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 835-1603411 Front 0.312\" 10.2\" 3 5\" Thru 1.6 lbs. Alum. drilled $6299 ea 835-1603327 Front 0.312\" 10.88\" 3 5\" Thru 1.8 lbs. Alum. drilled 6299 ea 835-1603411 J | WILWOOD FRONT STEEL ROTORS WEIGHT DESCRIPTION PART# STYLE THICKNESS O.D. B.C. THREAD PRICE 835-1603458 Front 0.312\" 10.25\" 3 5\" Thru 3.9 lbs. Drilled $10599 ea 835-1603458 835-16010475 Front 0.312\" 11\" 3 5\" Thru 3.2 lbs. Drilled & scalloped 8399 ea 835-1602084 Front 0.312\" 11.000\" 3 5\" Thru 7999 ea 4.7 lbs. Drilled K | ULTRA LITE FRONT TITANIUM ROTORS 940-31016 PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 940-31016 Front 0.25\" 10\" 3 5\" Thru 2.1 lbs. Ti Scalloped $49999 ea 940-31013 Front 0.25\" 10\" 3 5\" Thru 2.25 lbs. Ti Round 49999 ea L | SPEEDWAY FRONT ALUMINUM ROTORS 940-2700 PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 940-2700 Front 0.312\" 10.125\" 3 5\" Thru 1.3 lbs. Drilled $4499 ea 87 940-2710 4699 ea Front 0.312\" 10.875\" 3 5\" Thru 1.6 lbs. Drilled M | SPEEDWAY FRONT STEEL ROTORS 940-2705 PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 940-2705 Front 0.312\" 10.750\" 3 5\" Thru 2.7 lbs. Drilled & scalloped $8499 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT BRAKE PADS A | SINGLE CALIPERS SPEEDWAY COMPOUND DESCRIPTION THICKNESS PRICE 919-1566 156 Best for aluminum rotors 0.490 $899 ea 919-3385 Street performance 0.490 ULTRA LITE 338 DESCRIPTION 699 ea COMPOUND Ceramic coated rotors THICKNESS PRICE 940-31017 Metallic Heat shield .065” for single pin caliper 0.440 $2699 ea 940-31043 0.065 1299 ea Width 2.00” B | F11, DYNAPRO AND SINGLE CALIPERS Width 2.00” AFCO COMPOUND DESCRIPTION THICKNESS PRICE 106-6654002 Best for aluminum rotors $8999 4 pads 106-6654011 0.630 106-6654021 C1 Medium to high temperature pad 8999 4 pads THICKNESS 7999 4 pads 106-6654012 C2 High temperature high grip 0.490 11999 4 pads 0.500 PRICE Titanium Titanium alloy or stainless alloy rotors 0.500 $8599 4 pads WILWOOD COMPOUND DESCRIPTION 0.500 2299 ea 835-15012242K BP-40 High temperature racing pad 0.490 5199 4 pads 835-8272 CM High temperature racing pad 0.500 8099 4 pads 835-1509765K BP-20 8799 4 pads 835-15Q10144K PolyMatrix Q Street performance and racing pad 7499 4 pads 835-15B9819K Best for aluminum rotors 835-9820 PolyMatrix B High temperature racing pad PolyMatrix E Street performance and racing pad C | F33, DYNALITE DOUBLE QUICK CHANGE CALIPERS AFCO COMPOUND DESCRIPTION THICKNESS PRICE 106-12511000 C1 Medium to high temperature pad 0.480 $7999 4 pads 106-12512000 C2 High temperature high grip 0.480 106-6655011 8999 4 pads 106-6655021 C1 Medium to high temperature pad 0.600 9999 4 pads C2 High temperature high grip 0.600 11999 4 pads 106-6655012 Titanium Titanium alloy or stainless steel rotor 0.600 15999 4 pads 106-12511002 C1 7999 4 pads 106-6652002 Medium to high temperature pad 0.630 14999 4 pads 32 Medium to high temperature range 0.630 14999 4 pads 106-6652012 9999 4 pads 33 Cold power wide temperature range 0.630 14999 4 pads 106-12512002 C2 15999 4 pads Width 4.00” 106-6652022 High temperature high grip 0.630 PRICE $6499 4 pads 106-6656012 34 Cold power wide temperature range 0.630 PRICE $899 ea HAWK Titanium Titanium alloy or stainless steel rotor 0.630 COMPOUND DESCRIPTION THICKNESS 699 ea 919-10010 DTC-30 Wide temperature range 0.480 PRICE SPEEDWAY COMPOUND DESCRIPTION THICKNESS $5499 4 pads 919-1568 156 Low temperature street and performance 0.490 1099 ea 919-3387 11099 4 pads 338 Medium temperature street and performance 0.490 8099 4 pads WILWOOD COMPOUND DESCRIPTION THICKNESS 11199 4 pads 835-1509413K BP-20 Street performance and racing pad 0.490 835-3991 BP-10 Light to medium braking performance 0.490 835-15B3991K Polymatrix B 835-6096 High temperature racing pad 0.490 Polymatrix E Street performance and racing pad 0.490 835-15A5734K Polymatrix A High temperature racing pad 0.490 D | ULTRA LITE 200, 240, 250, 260 SERIES CALIPERS 240/250 - 2.75” wide ULTRA LITE COMPOUND DESCRIPTION THICKNESS PRICE 200/260 - 4.00” wide 940-31042 200 Series Ceramic coated rotors 0.630 $4499 ea 940-31057 200 Series Ceramic coated rotors 0.480 940-31012 200 Series Titanium heat shield 0.070 4499 ea 940-31010 240/250 Series Ceramic coated rotors 0.450 1499 ea 940-31039 240/250 Series Titanium heat shield 0.070 3999 ea 950-31031 260 Series Ceramic coated rotors 0.490 1499 ea 3999 ea 88 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»BRAKE PADS SPRINT A | F22, NDL OR DYNALITE WITH BRIDGE BOLT CALIPERS AFCO COMPOUND DESCRIPTION THICKNESS PRICE 106-6652002 32 Low grip racing pad 0.630 $14999 4 pads 106-12511002 C1 106-6652012 33 Medium to high temperature pad 0.630 7999 4 pads 106-12512002 C2 14999 4 pads 106-6652022 34 Cold power wide temperature range 0.630 HAWK COMPOUND 9999 4 pads 919-B237M Black High temperature high grip 0.630 14999 4 pads 919-M237MT Black PRICE 919-B237LT Blue 9012 Cold power wide temperature range 0.630 $6399 4 pads 919-23710 DTC-30 DESCRIPTION THICKNESS 919-23720 DTC-30 Medium torque and temperature racing pad 0.480 6399 4 pads ULTRA LITE COMPOUND 7099 4 pads 940-31036 Metallic Medium torque and temperature racing pad 0.625 8299 4 pads 940-31037 Metallic 8299 4 pads 940-31038 Medium to high torque and temperature racing pad 0.625 PRICE WILWOOD COMPOUND $3999 ea 835-15014346K PolyMatrix B Best for dirt track 0.625 3999 ea 835-15014345K PolyMatrix B 1499 ea 835-7264 PolyMatrix B Best for dirt track 0.480 PRICE 835-15B9836K PolyMatrix B DESCRIPTION THICKNESS $12999 ea 835-7266 PolyMatrix E Ceramic coated rotors 0.630 11299 ea 835-6098 PolyMatrix E 13699 4 pads 835-8858 BP-10 Ceramic coated rotors 0.485 13299 4 pads 835-9136 BP-10 9799 4 pads Titanium heat shield THICKNESS 9699 4 pads DESCRIPTION 0.600 5299 4 pads High temperature racing pad 4899 4 pads High temperature racing pad 0.490 High temperature racing pad 0.630 High temperature racing pad 0.490 Street performance and racing pad 0.600 Street performance and racing pad 0.490 Light to medium braking performance 0.600 Light to medium braking performance 0.490 B | SUPERLITE OR ULTRA LITE 300 SERIES CALIPERS HAWK COMPOUND DESCRIPTION THICKNESS PRICE 919-HB101M Black Medium torque and temperature racing pad 0.810 $9699 4 pads 919-HB101L Blue MT4 13699 4 pads 919-10110 DTC-30 Medium to high torque and temperature racing pad 0.810 12099 4 pads SPEEDWAY COMPOUND PRICE 919-2153 338 Best for dirt track 0.790 $1299 ea ULTRA LITE COMPOUND DESCRIPTION THICKNESS PRICE 940-31030 Metallic Medium temperature street and performance 0.730 $4499 ea WILWOOD COMPOUND DESCRIPTION THICKNESS PRICE 835-2392 Gator Ceramic coated rotors 0.780 $3199 ea 835-3992 PolyMatrix B DESCRIPTION THICKNESS 835-6100 PolyMatrix E Low to medium temperature high grip 0.800 4299 ea 835-8856 BP-10 11799 4 pads High temperature racing pad 0.800 7699 4 pads Street performance and racing pad 0.800 Light to medium braking performance 0.800 C | F88, SUPERLITE WITH BRIDGE BOLT THICKNESS AFCO COMPOUND DESCRIPTION 0.490 PRICE 106-6651011 C1 Medium to high temperature pad $14999 4 pads 106-6651012 THICKNESS 106-6651021 33 Cold power wide temperature range 0.800 18999 4 pads 15999 4 pads 106-6651022 C2 High temperature and grip THICKNESS 18999 4 pads 0.650 PRICE HAWK 34 Cold power wide temperature range 0.650 $12499 4 pads COMPOUND DESCRIPTION 0.800 PRICE 919-52110 DTC-30 Best for dirt track 0.800 $10999 4 pads WILWOOD COMPOUND DESCRIPTION 0.800 835-6707 Polymatrix E Street performance and racing pads 7699 4 pads 835-8855 15399 4 pads 835-5939 BP-10 Light to medium braking performance 10699 4 pads 835-6084 Polymatrix B High temperature racing pads 7699 4 pads 835-8854 Polymatrix E Street performance and racing pads BP-10 Light to medium braking performance SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 89 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT REAR CALIPERS/BRAKE KITS G | INBOARD BRAKE KITS A | INBOARD BRAKE KITS • Wilwood, dynapro caliper • Radial mount Dynalight nickel plated caliper • Two brake pads • Rotor mount with Dynamic mounting • Axle clamp with bolts • Complete with bolts, brackets, pads • Choice of Speedway rotor • Solid mount 910-31975 Standard 12.19\" x .810\" rotor $36999 kit 910-31980 Drilled 12.19\" x .810\" rotor 37999 kit 835-14015347 12.19 steel .810 vented rotor (shown) $49999 ea $19999 kit 835-14011206 10.5” Stainless steel .780 vented scalloped rotor 65799 ea $19999 kit 835-14011507 12.19 steel .350 solid scalloped rotor 53799 ea B | F88 SERIES FORGED $18999 ea H | RIGHT REAR BRAKE KIT ALUMINUM CALIPERS 18999 ea • Stiffest calipers on the market • definitive increase in braking and durability • Less brake heat $14399 ea over traditional aluminum rotor systems • Forged 6061 aluminum construction • 10.50 x 0.19\" Super Alloy steel rotor, Composition Metallic brake pads, lightweight aluminum dynamic mount splined rotor adapter and T-nut hardware kit 910-31970 • 1/8\" NPT inlet port • Speed bleeders for easy maintenance • Billet pistons with hard coat anodizing 106-6630010 106-6630020 .810\" rotor - 13⁄8\" piston J | RIGHT REAR BRAKE KIT .810\" rotor - 13⁄4\" piston • Includes Wilwood Dynalite caliper with 3.25\" mounts C | FORGED DYNALITE CALIPERS • Two brake pads 10.2\", .312\" thick aluminum splined Wilwood • Strongest caliper in its class rotor • 3.50\" mount center • Side inlet and 4 bleed screws 910-31970 835-12011571 .38\" rotors D | FORGED K | INBOARD BRAKE KIT SUPERLITE CALIPERS • Fully engineered bolt-on brake system • Forged design • for sprint car quick change rears with 3.00 x 46 splined axles • Features increased strength and improved fluid displacement • Titanium, Super Alloy or Steel, .810 vented or solid discs and a newly • Four-piston design for 12\" x .810\" thick rotors • 1/8\" NPT inlet and 3.50\" mounting centers designed dynamic mount rotor axle clamp, are the lowest rotating weights available for Sprint racing 835-12011128 1.38\" piston $17499 ea • Billet Dynalite Radial mount calipers with either Composition 835-12011134 1.75\" piston 17499 ea Metallic or BP-40 pads, produce superior stopping power and 835-12011135 1.75\" piston, side inlet 19199 ea consistent fade-free response 835-5939 Poly B brake pads - set of 4 15399 set • Kit includes Axle Clamp with Dual Mount Rotor Adapter with T-nuts, radial mount bracket assembly and mounting hardware E | INBOARD BRAKE KIT 835-14015346 $119999 kit • Radial mount Dynalight nickel plated caliper L | EVEN-FLOW CALIPER LINE KIT • Rotor mount with Dynamic mounting • Equalizes brake pressure to each side of inboard calipers • Complete with bolts, brackets, pads • Gives even pad wear and more consistent pedal 835-14011206 10.5” Stainless Steel Kit $65799 ea 940-31080 $3499 ea 835-12013406N Caliper 21299 ea 835-27012633 Rotor Clamp 20299 ea M | INBOARD CALIPER F | SEAL KIT DOGBONE RETAINER KIT • Does one caliper • Put on dogbone under the caliper mounting bolts 835-1302658 1.38\" diameter (4pk) $899 ea • Caliper bolts included 835-1302946 1.75\" diameter (4pk) 899 ea 940-2235 $1599 ea 90 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»ROTOR HUBS/BRACKETS SPRINT K | 4-BOLT $8999 ea E | DYNAPRO A | ALUMINUM 2-PIECE INBOARD MOUNT 999 ea SINGLE 21999 ea BRAKE ROTOR CLAMP RIGHT REAR • Reduces the stress placed on BRAKE KIT • Clamps to Winters axle the two rearend side mounts • 8 on 7\" rotor bolt pattern • Dyna Pro single • All hardware included caliper 940-31045 Mount 940-6366 Caliper bolt 835-14013502 10.2 Drilled alum rotor 626-1669 $18999 ea L | TITANIUM INBOARD CALIPER BOLT • For Ultra-Lite/Red Devil brackets only 940-6366 7⁄16\"-14 x 1.250\" $999 ea M | INBOARD F | DYNAMIC MOUNT B | LIGHTWEIGHT BRAKE ROTOR CLAMP INBOARD FLOATER HUB MOUNT KIT • Clamps to a Winters axle and dynamic • Aluminum • A must for titanium rotor mount rotors applications to eliminate bolt failure 835-27012635 51⁄2\" x 6 bolt $20299 ea • Fits most rear axles and 8 on 7\" rotors 835-27012633 7\" x 8 bolt 20299 ea • 1.2 lbs. 940-31025 835-2309752 6 bolt kit 3799 ea 835-23010483 8 bolt kit 4999 ea 940-2930 $11999 ea $6999 kit N | LEFT REAR BRAKE G | INBOARD BRACKET ROTOR CLAMP C | LIGHTWEIGHT • Aluminum brake bracket • Fix the rotor in place by floating it into • Fits standard Eagle and Maxim birdcages position, 51/2\" x 6 bolt pattern 940-31009 $3999 ea 802-4767 $13999 ea INBOARD BRAKE CLAMP • Super lightweight and strong • Designed for 8 on 7\" floating rotors 940-2932 $19999 ea P | RIGHT REAR BRAKE H | SPLINED BRACKET RIGHT REAR • For 3.25\" mount caliper and 10\" rotor ROTOR MOUNT 940-31028 Titanium $5999 ea • Allows you to run a LF rotor on the right rear 940-31027 Steel 1499 ea • Even if the rotor is warped or bent, it's still easy to remove 940-2230 3 on 5\" $5799 ea Q | RIGHT REAR J | ALUMINUM D | ALUMINUM BRAKE BRACKET BRAKE ROTOR CLAMP • .750” vertical rise, sized for INBOARD BRAKE 940-31011 51⁄2\" x 6 bolt $39999 ea 10.5” rotors 3.25” caliper CLAMP SPACER 950-31019 Buttons 5499 set 940-920150 Aluminum hub only 9499 ea • Zinc plated • Tapped for direct mount to birdcage 940-8073 $1599 ea 802-2299 1.1\" thick $1899 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 91 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT ULTRA-LITE BRAKES AND COMPONENTS C | RIGHT REAR BRAKE KIT A | INBOARD BRAKE KITS • 10\" floating titanium • Save weight and increase braking rotor and mount .810\" x 10.4\" rotor is ceramic coated for durability and performance and is mated to a billet caliper 940-31024 Brake kit $69999 kit 940-31010 3999 ea 940-31056 .810\" titanium rotor inboard kit hd - 4 bolt mount $139999 kit 950-31031 Ceramic Ultra-Lite 240 pad 3999 ea 940-311056 .810\" titanium rotor inboard kit hd - 4 bolt mount- black caliper 139999 kit 940-31039 Ceramic Ultra-Lite 260 pad 1499 ea 940-31000 Standard titanium rotor - 2 bolt mount 134999 kit Heat Shield -240/250 940-31100 Standard titanium rotor - 2 bolt mount- black caliper 134999 kit $29999 ea 940-31001 99999 kit D | FEATHERWEIGHT 3999 ea 940-31055 Standard steel rotor - 2 bolt mount 129999 kit INBOARD CALIPER 4499 ea 940-31155 Inboard titanium brake kit non-vented rotor hd - 4 bolt mount 119999 kit 1499 ea Inboard ti brake kit non-vented rotor hd - 4 bolt mount- black caliper • 200 Series 4499 ea 940-31002 Scalloped steel rotor - 2 bolt mount 109999 kit 940-31032 Caliper 1499 ea 940-31033 Bracket B | LEFT FRONT BRAKE KITS 940-31042 Pad 940-31012 Heat shield • 10\" titanium rotor, round or scalloped 940-31057 Pad .480\" thick • Left front single-piston caliper, left front brake 940-180200 O-ring kit bracket E | SINGLE PISTON CALIPER • 31/4\" mount • Pads for ceramic coated rotors • Floating caliper for 10\" rotor and 31/4\" spindle mount 940-31020 10\" Round rotor $67499 kit 940-31120 10\" Round rotor - Black caliper 61999 kit 940-31014 Single piston caliper $13999 ea 940-31022 10\" Scalloped rotor (shown) 61999 kit 940-31015 3999 ea 940-31122 10\" Scalloped rotor - Black caliper 61999 kit 940-31017 Bracket 2699 ea 940-4990 Carbon fiber brake line guard 3499 ea 940-31043 Pad 1299 ea 940-31018 Red Devil steel screw only 399 ea 940-191625 Heat shield 399 ea O-ring MRP Dropship Apparel No Minimum Order - No Inventory - No Hassle Dropship Apparel makes it easy for you to sell T-Shirts with very little cost and management. MyRacePass will create the store, create the design, print the shirts and then ship the shirts either to you or your fans/customers. Your profits, that you can set, will be automatically deposited into your bank account. Get Started Today at www.MRPDropship.com 888-970-4734 | [email protected] @MyRacePass 92 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
BRAKE ROTORS » SPRINT A | STEEL OR CAST IRON ROTORS 835-1600277 940-31065 PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 835-1603458 Front 0.312\" 10.25\" 3\" 5\" Thru 3.9 lbs. Drilled $10599 ea 940-2705 5\" Thru 2.7 lbs. Drilled & scalloped 8499 ea 940-2705 Front 0.312\" 10.750\" 3\" 5\" Thru 835-1605865 835-16010475 Front 0.312\" 5\" Thru 3.2 lbs. Drilled & scalloped 8399 ea 11\" 3\" 835-1602084 Front 0.312\" 11.000\" 3\" 4.7 lbs. Drilled 7999 ea 835-1603450 Inboard 6999 ea 835-1603455 Inboard 0.75\" 10.5\" 6\" 5.5\" Thru 7.1 lbs. Vented 7999 ea 835-1600277 Inboard 0.35\" 10.5\" 6\" 5.5\" Thru 4.8 lbs. Drilled 3799 ea 835-1605865 Inboard 6999 ea 940-31060 Inboard 0.81\" 12.19\" 8\" 7\" Thru 9.1 lbs. Vented 5499 ea 940-31064 0.81\" 12.19\" 8\" 7\" Thru 8.6 lbs. Drilled 5499 ea 940-31065 0.81\" 12.19\" 8\" 7\" Thru 6.13 lbs. Scalloped 4999 ea 940-31062 Inboard 1.250\" 11.75\" 8\" 7\" Thru 6.36 lbs. Scalloped 6499 ea 940-31066 Inboard 0.81\" 11.75\" 8\" 7\" Thru 6.58 lbs. Scalloped 6499 ea 940-31068 5999 ea Inboard 0.81\" 12.19\" 8\" 7\" Thru 5.56 lbs. Drilled & scalloped Inboard 1.250\" 11.75\" 8\" 7\" Thru 6.13 lbs. Drilled & scalloped Inboard 0.81\" 11.75\" 8\" 7\" Thru 5.07 lbs. Drilled & scalloped 835-1609773 Inboard 0.35\" 12.19\" 8\" 7\" Thru 4.6 lbs. Drilled & scalloped 8399 ea 835-1608136 Inboard 0.81\" 12.19\" 8\" 7\" Thru 5.9 lbs. Scalloped 8999 ea 835-1605538 Inboard 0.35\" 12.19\" 8\" 7\" Floating 4.6 lbs. Drilled & scalloped 15299 ea 835-1600495 Inboard 0.31\" 7999 ea 12\" 8\" 7.62\" Threaded 4.7 lbs. Drilled B | TITANIUM AND CHROMOLY ROTORS CERAMIC COATED PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 940-31068 940-31016 Front 0.25\" 10\" 3 5\" Thru 2.1 lbs. Ti Scalloped $49999 ea 835-1603411 940-31013 Front 0.25\" 2.25 lbs. Ti 49999 ea 950-31020 Front 0.25\" 10\" 3 5\" Thru 2.8 lbs. C/M Scalloped 39999 ea 940-31019 LR or RR 10\" 3 5\" Thru Drilled 49999 ea 940-31005 IB 0.25\" 1.75 lbs. Ti 72999 ea 940-31006 IB 0.810\" 10\" 42-spline Floating 3.011 lbs. Ti 69499 ea 0.810\" 3.45 lbs. Ti 10.4\" 6 5.5\" 10.4\" 6 5.5\" 835-1603458 940-31016 C/M = CHROMOLY Ti = TITANIUM C | WILWOOD SUPER ALLOY ROTORS PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 835-16012571 Inboard 0.36\" 12\" 8 x 7.00\" 8 through 3.3 Slotted / Solid $72999 ea 835-16011763 Drilled / Scalloped 68999 ea 835-16011217 Inboard 0.78\" 10.5\" 6 x 5.50\" 8 through 2.5 Drilled / Scalloped 19999 ea 835-16010717 Inboard 0.78\" 10.5\" 6 x 5.50\" 6 through 3.2 Inboard 0.78\" 10.5\" 9 X 7.00\" 9 through 1.3 Drilled / Scalloped / solid 15999 ea D | ALUMINUM ROTORS PART# STYLE THICKNESS O.D. B.C. THREAD WEIGHT DESCRIPTION PRICE 940-2700 Front 0.312\" 10.125\" 3 5\" Thru 1.3 lbs. Drilled $4499 ea 835-1603411 Front 0.312\" 10.2\" 3 5\" Thru 1.6 lbs. Alum. drilled 6299 ea 940-2730 4999 ea 940-2710 Front 0.312\" 10.875\" 3 5\" Thru 2.2 lbs. Solid 4699 ea 835-16012571 Front 0.312\" 10.875\" 3 5\" Thru 1.6 lbs. Drilled 835-1603327 5\" Thru 1.8 lbs. Alum. drilled 6299 ea 835-1603270 Front 0.312\" 10.88\" 3 Floating 1.9 lbs. Alum. drilled 6999 ea LR or RR 0.312\" 10.2\" 42-spline 835-16011763 106-6640129 Front 0.312\" 10.875\" 3 5\" Thru 2.2 lbs. Alum. drilled 9999 ea 106-6640131 Front 0.312\" 10.125\" 3 5\" Thru 2.2 lbs. Alum. drilled 9999 ea E | PILLAR VANE FLAT ROTORS 106-6640100 835-16010717 950-31005 • Strength of 80 vane, weight of a 32 vane • 7”, 8 hole bolt circle • Thru thread PART# THICKNESS O.D. WEIGHT PRICE 106-6640100 0.810\" 11.75\" 8.20 lbs. $5499 ea F | DISC BRAKE ROTORS • RaceSaver Approved! PART# THICKNESS O.D. PRICE 950-31005 0.810\" 10.4\" $16999 ea SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 93 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT JACOBS LADDERS / SETUP BLOCKS A | CHROMOLY M | 6-PIECE QUICK JACOBS LADDER RELEASE PIN KITS • Available in 121/4\", 131/4\", 131/2\", 135/8\", 14, 141/4\" • Three 3/8\" pins 940-55121-SIZE Chrome - ladder $5499 ea 940-950 Ti - 3⁄8\" at Clevis/Rod end $2899 kit 940-55122-SIZE Plain - ladder 5499 ea 940-951 Ti -1⁄2\" at Clevis/Rod end 2799 kit 940-9600 1799 ea 940-9600 Steel - 3⁄8\" at Clevis/Rod end 1799 set 940-9602 Ladder pin kit - 3⁄8\" 1799 ea 940-9602 Steel - 1⁄2\" at Clevis/Rod end 1799 set 940-9605 Ladder pin kit - 1⁄2\" 199 pr 940-950-2 Ti - 3⁄8\" at Clevis/Rod end single 799 ea Ladder springs 940-1001 Rue Clip3⁄8\" 940-1002 Rue Clip 1⁄2\" $0.99 ea 135⁄8” 0.99 ea B | ADJUSTABLE H | ALUMINUM JACOBS LADDER JACOBS LADDER N | LIGHTENED • Lightweight milled aluminum with bearing ALUMINUM STRAPS • Available in 121/4\", 131/4\", 135/8\" and 14\" straps • 7\" centerline to centerline 940-55123-SIZE $5499 ea 546-800 7\" straps $6499 ea 940-45011 Plain (shown) $599 ea 940-45015 Black 699 ea J | JACOBS 940-45016 6\" center to center plain 599 ea LADDER ROD END C | TITANIUM JACOBS LADDER 910-02124 1⁄2\" shank 3⁄8\" hole $1599 ea 910-02125 5⁄8\" shank 3⁄8\" hole 1899 ea • Available in 121/4\", 131/4\", 131/2\", 135/8\" or 14\" 150-017 FK aluminum 5⁄8\" shank 3⁄8\" hole 1499 ea P | NYLON ROD END SPACER 940-55120-SIZE $10999 ea 150-018 FK blk. alum. 5⁄8\" shank 3⁄8\" hole 1499 ea • Bag of 10 • 1/2\" to 3/8\" D | 3 HOLE 175-900 $599 bag JACOB LADDERS • 1/2\" adjustments 940-1981 For XP cages - 14.25\" $6399 ea K | BIRDCAGE CLEVIS Q | CALIPER BRACKETS 940-1982 For std. cages - 13.25\" 6399 ea 940-1983 For std. cages - 12.25\" 6399 ea 815-C00150 Ti 5⁄8\" birdcage clevis $3499 ea FOR CLOSE RATIO BILLET 175-6046-RH 5⁄8\" shank 3⁄8\" hole 399 pk 175-6048-RH 5⁄8\" steel jam nut 6pk 399 pk BIRDCAGES 5⁄8\" steel jam nut, 3⁄4\" hex 940-31023 .650\" rise (shown) $1999 ea 940-8073 .750\" rise 1599 ea E | JACOBS R | SET-UP LADDERS • Fabricated out of 3⁄4” round solid steel tube • Adjustable in 1⁄2” increments • Features Ti Hardware 945-17102 13.25” Black Ladder Assembly $11999 ea BLOCKS 946-27400 13.25” Single Hole 6399 ea • Adjustable in 1/4\" increments • Use 6” blocks to square the rearend and 4” blocks to race, on raised rail cars subtract 1” on this set-up on the LH side F | REAREND SQUARING TOOL STANDARD $6999 pr 910-82750 1.75\" - 4\" 7999 pr • Allows you to work on other points of the 910-82755 3\" - 6\" car at the same time without moving out of square • Quick attachment, aluminum construction 802-12441 $11999 ea PROFESSIONAL 940-82752 1.75\" - 4\" 940-82754 3\" - 6\" $8499 pr 9499 pr G | SPRINT L | SQUARING BLOCKS ACCESSORIES ALIGNMENT TOOL 1 940-82758 Adapters • Adjustable blocks and quickly and securely 2 910-5125 Cradle rollers 940-81055 Standard mount to your car and cradle the axle, 910-81056 Pro (shown) making it a breeze to set height and square $13999 ea 1 940-6011 Squaring block sprint $28999 ea $3999 pr 19999 ea 2 940-60112 Squaring arms sprint 6999 ea 8999 pr 94 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»BIRDCAGES SPRINT H | CLOSE RATIO A | BDS BIRDCAGES BILLET BIRDCAGES D | FORGED • Increased rigidity • 7075 billet aluminum BIRDCAGES • Angled radius rod spud • LR and RR brake mounts • Spacers included • Easily greased • Fully greasable • Tighter profile • 28mm angle contact bearing 940-37028 LH birdcage $16599 ea • Precise pick-up points • Integrated timing level 940-37029 16499 ea 802-2575 Birdcages 910-02116 RH birdcage 1999 ea 802-3597 Lock plate 5⁄8\" Chromoly heim • Same design run by top outlaw teams E | AXLE SAVERS $29999 pr 299 ea 940-22006 LH complete birdcage $14999 ea • For use with axles that are 940-22007 RH complete birdcage 14999 ea splined next to the birdcage 1 940-22002 8999 ea 2 940-22003 LH birdcage-only 7999 ea • Protects splines RH birdcage-only 3499 ea 802-2269 3 940-59142RS28GG Angular contact bearing 802-12239 Splined 4 940-4014 Radius rod spud 299 ea 5 912-55601 1999 ea 6 940-22005 Spiral lock 399 ea 7 940-31023 Steel flag bolt 1999 ea 940-22001 Brake bracket 999 ea $1699 ea 799 ea 5999 ea 910-10595 Birdcage hardware kit Low profile grease zerks F | STEEL CANTED BIRDCAGE SPUD SPACERS B | BIRDCAGES • Completely redesigned • Ultra tight ratio • Canted radius rod spud for zero bind J | BILLET BIRDCAGES 802-6156 3⁄16\" $1199 ea EAGLE 624-S403 9⁄16\" 1199 ea 940-37017 W/ bearings (shown) $32999 set • Machined from 2024 aluminum 940-37018 29999 set • Lightweight and durable 940-37024 W/O bearings • Built with angled brake mounts on both sides Long Birdcage flag 3499 ea 940-37025 RH birdcage 16499 ea and solid race bearings 940-37026 16499 ea 910-10595 LH birdcage 799 bag 940-4010 $37999 pr Low profile zerks 940-59142RS28GG Angular contact bearing 3499 ea G | LOW FRICTION BEARINGS • 28mm double row K | BIRDCAGE BEARING • 1.1\" wide, 3.940\"outside diameter INSTALLATION TOOL • Fits many different birdcages 940-2254 $4499 ea 940-59142 $9799 ea L | BIRDCAGE BEARING CHART PART# DESCRIPTION WIDE M.M. O.D. PRICE DOUBLE ROW BEARING 940-59142RS28GG Angular contact STD race w/ grease groove 1.1\" 28 3.94\" $3499 ea 940-59142RS28 Angular contact split race 1.1\" 28 3.94\" 3499 ea C | BIRDCAGES 912-55600 Angular contact STD race w/ grease groove 1.26\" 28 3.94\" 4999 ea SINGLE ROW BEARING • Proven and reliable 0.63\" • Reinforced radius rod spud 0.79\" 28 3.94\" $1599 ea • Versatile design mates with any arm 912-69142RS Lightweight 0.79\" 32 4.33\" 1999 ea SCHNEE 912-60142RS 0.79\" 912-B6014LL Single row medium 0.83\" 32 4.33\" 2999 ea 940-36001 RH birdcage $17499 ea 0.942\" 624-6014RS Single row medium 32 4.33\" 3999 ea 940-36002 LH birdcage 17499 ea 624-6211RS Single row medium 28 3.94\" 3599 ea 940-36003 LH stack tube (shown) 20999 ea 624-6214RS Midget 32 4.92\" 3999 ea 910-10595 Low profile zerks 799 bag Standard single row SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 95 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT U-JOINTS/DRIVESHAFTS A | HOLLOW STEEL DRIVESHAFTS H | COMPLETE CONVERSION KITS • Lightweight • 10-spline end to 16-spline other end • Includes everything you need to convert your driveline to the new swivel spline driveline 802-39425 Gundrilled steel driveshaft and steel lower shaft $67999 kit 624-S16416 Sander (shown) $14999 ea J | SWIVEL SPLINE 940-2430 DMI - 30\" 13999 ea 940-2481 DMI - 26\" swivel coupler 16 x 16 spline 12999 ea B | TITANIUM DRIVESHAFT SEAL KIT • Gundrilled, 10-16 spline • Replacement kit includes Viton O-ring, sealing boot, snap ring and • Available in 28\", 30” and 32\" length boot retainer 802-5988TG-30 940-3942 $5499 kit $71999 ea C | 32-SPLINE BALL DRIVESHAFTS K | U-JOINTS • Reduces deflection and eliminates bind MPD • Lighter than many Titanium driveshafts 1 546-638 Chevy 16-spline $26999 ea • Large O.D. shaft WINTERS $28999 ea • 32-spline 2 802-4865-SPECIFY Hercules 16 or 32 spline • Non-swivel style rearends can be upgraded to accept this shaft 16499 ea • 27.5” long 17499 ea $26999 ea 802-394203 Shaft (shown) $34999 kit 940-2320 Billet 16-spline 22499 ea 802-3700 U-joint 17499 ea 802-3700 $13999 ea DMI Billet 32-spline 8499 ea 940-2359 2K11 Alum./Chromoly 8499 ea 3 940-2355 32499 ea 2K11 Gladiator aluminum SANDER ENGINEERING D | SWIVEL SPLINE QR KIT 624-S304 Steel - 16-spline 802-12240-SPECIFY Swivel spline coupler (shown) $41999 ea 802-12438 Ret assy - QR swivel spline 12499 ea 624-S301 Alum. crank flange, for early S/B Chevy 41999 ea 916-25100 802-666103 Tube and collar for QR 5999 ea 624-304 Alum. crank flange, for late S/B Chevy 802-12239 LH axel spine saver Roush Yates E | REAREND L | U-JOINT SPRING $599 ea CONVERSION KIT $499 kit 624-S306 2999 kit • Converts old style rear to swivel splined driveline 699 ea 802-39421 Steel conversion kit $32999 kit M | U-JOINT BOLT KITS 802-39422 Titanium conversion kit 69999 kit $1299 ea • Set of 4 10 ea 1 940-11111 Speedway - steel, socket head 1099 ea 2 940-120 499 ea F | DRIVE LINE INSTALLATION 940-6103 Ti64 - Ti, hex head 4999 ea KIT W/ DRIVESHAFT Speedway - Ti hex head • Complete swivel spline driveshaft kit • 16-spline 802-39423 Steel - Gundrilled $34999 kit 802-39424 Titanium - Gundrilled 89499 kit G | TUBULAR ALUMINUM DRIVESHAFTS N | RACING • Lightweight GREASE Almagard • Great for 305 Sprints Mobil 1 Fully Synthetic grease • 10-16 spline 1 498-3752 Mobil Polyrex EM grease • 30\" long 2 324-1210711 Lucas Oil Red \"N\" Tacky 3 940-1612 Driveline spline grease, 1⁄2 lb tub 940-2430A DMI - 30\" $18499 ea 4 484-105741 5 910-7070 96 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
»WINTERS REARENDS/COMPONENTS SPRINT CHECK WEBSITE FOR PRICING H | ALUMINUM E | LH AXLE SPLINE SAVER REPLACEMENT AXLE 802-12239 $5999 ea A | PRO ELIMINATOR REARENDS 802-5778A Standard 1.750 I.D. $57999 ea 802-5778L Lightweight 1.875 I.D. 59999 ea • Right hand bell is part of the magnesium 802-5778UL Ultra lite 2.062 I.D. case, allowing it to be stronger and lighter 109999 ea • Pinion posi-lock nut assembly F | REAR COVER GASKETS • Pinion nose roller bearing • 52” lightweight aluminum axle option 1 344-2303 Fel Pro for Franklyn / DMI $999 ea 802-6729HD Winters - steel 799 ea (saves 3 lbs.) 399 ea 2 802-6729 Winters - paper 699 ea INTERNAL COUPLER 802-8440 Winters - O-ring 999 ea 802-837SC-411 4.11 $149999 ea 299 ea 802-837SC-486 146999 ea J | REAR COVER 3 919-6875 Halibrand SWIVEL BALL COUPLER 4.86 NUTS & STUDS 919-6876 Super seal - Winters $159999 ea 802-837SC-411SS 4.11 156999 ea • Set of 10 802-837SC-486SS 910-47842 Speedway - set of 10 2999 set 4.86 802-7794AR Individual nuts 599 ea 802-7794ASR Red short nut alum 499 ea 910-47843 Halibrand - set of 12 3999 set K | FILL B | COMPETITION 305-6 BREATHER CAN • For 305 Sprints • 8 3/8\", 3.78 ratio ring and pinion reduces • AN 6 inlet on side and AN 8 flywheel weight return at bottom • Great for small tracks • Accepts 6-Spline quick-change gears • Can be cleaned and reused G | PRO ELIMINATOR SWIVEL 802-3056 $169999 ea • Fully welded lightweight SPLINED DRIVE LINE $13999 ea C | COMPETITION 305-10 aluminum $899 ea • Swivel spline eliminates common • Weighs .70 lbs driveline problems • For 305 Sprints 802-4763 • 8\", 4.11 ring gear for weight and space savings • Improved spline wear 28-spline lower • Great for small tracks L | REAREND shaft replaces 10-spline • Accepts 10-Spline quick-change gears BREATHER • 16-31 spline driveshaft replaces 16-10 • Clamp on design, no welding spline required • Retrofits in all Winters 10” shifter rears • Thread Size (in): 0.125 • For 1/2\" connection # DESCRIPTION PART# PRICE 465-621330 1* Lower shaft, steel 802-2973 $12999 1* Lower shaft, titanium 802-2973T 39999 2 Seal 802-7280 1399 3 Snap ring 802-7619 299 802-30510 4 Spacer 802-6680 999 $189999 ea 5 Bearing 802-7531 3299 6 Coupler 802-2975 16999 M | PRO 7 Core plug 802-7918 199 ELIMINATOR 8 Snap ring 802-8337 299 REAREND 9 3⁄8\"-24 x 11⁄4\" FHCS 802-8723 199 FINISH KIT 10 C-Sunk washer 802-2978 499 $9799 ea 11 Snap ring 802-7687 199 802-8269-STD 12 Swivel insert 802-2976 9799 BILLET HEAVY-DUTY 15 Sealing boot 16 spline 802-7287 3299 15 Sealing boot 32 spline 802-728732 3299 D | REAR COVERS 16 Snap ring 802-8340 299 17 Boot retainer 802-3564 1599 • Magnesium N | PRO 18* Driveshaft steel, GD 802-2974G 16999 • Complete with bearings $15999 ea ELIMINATOR 802-K6508 Standard 17999 ea REAREND BREATHER KITS 18* Driveshaft, titanium, GD 802-2974TG 46999 802-6746C Standard coated 18999 ea • *Part Numbers in this list may vary depending on 802-K3736 Heavy-duty 20999 ea options ordered at time of purchase. 802-K3736C Heavy-duty coated 24999 ea 802-2966 $2199 kit 802-4873 Billet aluminum SOME PARTS ARE NOT LEGAL FOR SALE OR USE IN CALIFORNIA ON SPEEDWAYMOTORS.COM 97 ANY POLLUTION CONTROLLED MOTOR VEHICLE.
»SPRINT C | DRIVE COUPLERS A | POSI-LOCK NUT ASSEMBLY • Easy removal but stays when changing gears • Fits current and old-style ring and pinion • Specify left or right EXTERNAL COUPLERS 802-6498-SPECIFY $5499 set 802-5987 Winters - 10-10 spline $4299 ea D | RING AND PINIONS WINTERS INTERNAL COUPLERS 802-6676A Aluminum internal coupler $5999 ea • For quick-change with threaded ring gears 802-5714 4.12 bare $32499 ea 802-6676 Steel internal coupler 10-10 7499 ea 802-51457 4.57 bare 36999 ea spline 802-5400 4.86 bare 27999 ea LOADED W/ ROLLER BEARING AND POSI-LOCK NUT 802-5714L 4.12 loaded $41999 ea 802-52457 4.57 loaded 45999 ea 802-5400L 4.86 loaded 41999 ea E | LOWER SHAFTS $9499 ea B | PRO-ELIMINATOR REAREND $10999 ea REPLACEMENT PARTS 802-6250 Rear LOWER SHAFT INTERNAL COUPLER 36999 ea 802-6678-01 Steel $12999 ea 802-6678T Titanium LOWER SHAFT SWIVEL SPLINE 39999 ea 802-2973 Steel 802-2973T Titanium 1 Winters Pro center coated 802-K2225C $69999 ea 49 Ball bearing 802-7390 1899 ea 2 Mag Pro elim. side bell 802-K6964 26499 ea 50 Snap ring, stationary coupler 802-7673 299 ea 3 Mag Pro elim. side bell coated 802-K6964C 32499 ea 51 Ball bearing, stationary coupler 802-7391 4 Shim kit, axle bearings 802-6115 1399 kit 52 Internal snap ring, rear bearing 802-7636 2799 ea 7 O-ring, side bell 802-7403T 899 ea 53 Stationary coupler 802-6252 499 ea 8 O-ring, side bell seal 802-7433 699 ea 54 Small bearing, stationary coupler 802-7392 9 Seal side bell 802-7224 2199 ea 55 Sliding coupler 802-6265 12499 ea 10 Internal snap ring, side bell seal 802-7626 499 ea 56 External snap ring, stub shaft 802-7637 899 ea 13 Ring and pinion (Standard with 4.86 Ratio) 802-5400 27999 ea 57 Shielded ball bearing, stub shaft 802-7390 14 3⁄8 Belleville washer 802-7815 199 ea 58 Stub shaft 802-6250 8999 ea 15 Ring gear bolt 802-7852 299 ea 59 Snap ring, lower shaft 802-7610 299 ea 16 ⁄716 -20 nylon locknut (use with P/N 802-2266) 802-7177N 199 ea 60 1⁄4 diameter steel detent ball 802-7347 17 Stud, steel 802-2266 399 ea 61 Detent spring 802-6318 1899 ea 20 Stud 802-7863 399 ea 62 Shifter arm, cast 802-1524 9499 ea 22 1⁄2-13 adjusting screw 802-6149 1699 ea 63 Gasket shifter housing 802-6515 25 Thrust block 802-5010 1899 ea 64 Shifter shaft 802-6251 399 ea 29 Roller bearing, pinion nose shaft 802-7331 3299 ea 65 Shift arm 802-6496 199 ea 30 Bearing cone, pinion shaft 802-7308 2399 ea 68 O-ring, shifter shaft (large) 802-7442 399 ea 31 Double bearing cup, pinion shaft 802-7307 3399 ea 69 O-ring, shifter shaft (small) 802-7443 5999 ea 32 Bearing washer, pinion 802-5055 599 ea 71 Shifter housing 802-6264 499 ea 33 Posi-Lock nut 802-6485R 3499 ea 72 External snap ring, shifter shaft 802-7631 6999 ea 34 O-ring, Posi-Lock retainer 802-7445 299 ea 73 Driveshaft snap ring 802-7605 2199 ea 35 Posi-Lock retainer 802-6484 2999 ea 75 Special seal ball bearing, lower shaft 802-7383F 299 ea 36 Retaining ring, pinion 802-5020 1999 ea 76 Ext. snap ring, lower. shaft for integral coupler 802-7660 299 ea 37 Retainer plate, pinion 802-6296A 2999 ea 77 Standard lower. shaft, shifter w/integral coupler 802-6678-01 5999 ea 38 Bearing retainer 802-6267 3299 ea 78 Spacer, front bearing 802-6680 199 ea 39 Lock tab, pinion retainer plate 802-2374 599 ea 79 O-ring, lower shaft w/integral coupler 802-7452 399 ea 41 Quick-change gear set 802-85-SET 6499 ea 80 Seal, integral coupler 802-7242 3199 ea 42 Gasket, gear cover 802-6729HD 799 ea 81 Internal snap ring, integral coupler 802-7664 299 ea 42A O-ring for billet rear cover 802-8440 699 ea 82 Integral 10-10 coupler, steel 802-6676 10999 ea 43A Billet rear cover 802-4873 24999 ea 83 Sealed ball bearing, integral 10-10 coupler 802-7531 999 ea 44 Double row ball bearing w/ snap ring 802-7521 3999 ea 84 External snap ring, integral 10-10 coupler 802-7657 499 ea 45A Back-up ring, O-ring 802-7496 299 ea 1399 ea 199 ea 7499 ea 3299 ea 299 ea 98 ORDER 7AM TO 10PM: 800.979.0122 // SPEEDWAYMOTORS.COM
Search
Read the Text Version
- 1
- 2
- 3
- 4
- 5
- 6
- 7
- 8
- 9
- 10
- 11
- 12
- 13
- 14
- 15
- 16
- 17
- 18
- 19
- 20
- 21
- 22
- 23
- 24
- 25
- 26
- 27
- 28
- 29
- 30
- 31
- 32
- 33
- 34
- 35
- 36
- 37
- 38
- 39
- 40
- 41
- 42
- 43
- 44
- 45
- 46
- 47
- 48
- 49
- 50
- 51
- 52
- 53
- 54
- 55
- 56
- 57
- 58
- 59
- 60
- 61
- 62
- 63
- 64
- 65
- 66
- 67
- 68
- 69
- 70
- 71
- 72
- 73
- 74
- 75
- 76
- 77
- 78
- 79
- 80
- 81
- 82
- 83
- 84
- 85
- 86
- 87
- 88
- 89
- 90
- 91
- 92
- 93
- 94
- 95
- 96
- 97
- 98
- 99
- 100
- 101
- 102
- 103
- 104
- 105
- 106
- 107
- 108
- 109
- 110
- 111
- 112
- 113
- 114
- 115
- 116
- 117
- 118
- 119
- 120
- 121
- 122
- 123
- 124
- 125
- 126
- 127
- 128
- 129
- 130
- 131
- 132
- 133
- 134
- 135
- 136
- 137
- 138
- 139
- 140
- 141
- 142
- 143
- 144
- 145
- 146
- 147
- 148
- 149
- 150
- 151
- 152
- 153
- 154
- 155
- 156
- 157
- 158
- 159
- 160
- 161
- 162
- 163
- 164
- 165
- 166
- 167
- 168
- 169
- 170
- 171
- 172
- 173
- 174
- 175
- 176
- 177
- 178
- 179
- 180
- 181
- 182
- 183
- 184
- 185
- 186
- 187
- 188
- 189
- 190
- 191
- 192
- 193
- 194
- 195
- 196
- 197
- 198
- 199
- 200
- 201
- 202
- 203
- 204
- 205
- 206
- 207
- 208
- 209
- 210
- 211
- 212
- 213
- 214
- 215
- 216
- 217
- 218
- 219
- 220
- 221
- 222
- 223
- 224
- 225
- 226
- 227
- 228
- 229
- 230
- 231
- 232
- 233
- 234
- 235
- 236
- 237
- 238
- 239
- 240
- 241
- 242
- 243
- 244
- 245
- 246
- 247
- 248
- 249
- 250
- 251
- 252
- 253
- 254
- 255
- 256
- 257
- 258
- 259
- 260
- 261
- 262
- 263
- 264
- 265
- 266
- 267
- 268
- 269
- 270
- 271
- 272
- 273
- 274
- 275
- 276
- 277
- 278
- 279
- 280
- 281
- 282
- 283
- 284
