2021 Van Isle Product Catalogue WS - Unpriced w: Hyperlinks

2017

Terms And Conditions Terms of Payment: All product shipped from VAN ISLE WATER will be C.O.D. unless prior credit approval is obtained. C.O.D. shipments will be VISA, MC, or Certified Cheque prior to shipping. Qualified accounts have net 30 days from time of order. Prices & Taxes: Catalogue is “List” pricing in Canadian dollars. “List” pricing is only suggested retail pricing and not actual. Actual retail pricing varies by product and region. All prices are as of date of printing and are subject to change without notice. Van Isle Water is not responsible for printing errors. Buyer shall pay all applicable taxes. Freight Policy: Freight is prepaid on $1000 net pre tax value for net 30 account customers. Items requiring special handling such as dangerous goods and oversize products are designated by a \" \" symbol and are exclusive of prepaid freight. Van Isle Water will use the carrier of its choice. Freight Claims: Van Isle Water does not assume responsibility for freight damage. All freight damage and shipping discrepancies must be claimed within 48 hours of receipt of goods. Customer must inspect shipments for damage and make claim with carrier. Short Shipment: Van Isle Water must be notified of any short shipments within 48 hours of receipt of goods with copy of carrier waybill and customer count. Return Goods: Return goods must be authorized by Van Isle Water. A copy of original invoice must accompany all returns. All returns must be shipped prepaid freight and are subject to a restocking fee up to 25%. Product damaged in freight return will not be accepted. Credit will be issued to account for future purchases. No returns after 30 days. Special order items are not returnable. Warranty: All defective items within the manufactures warranty period must be authorized first and returned to Van Isle Water with a RGA#. Customer is responsible for return of item(s) and all freight costs. Item(s) will either be replaced or repaired at Van Isle Water’s discretion. Item(s) sent back must be accompanied with customer proof of purchase and retail customer receipt. Shipment of replaced or repaired item will be responsibility of customer. Replacement or repaired items may be added to a prepaid shipping order. Contact Victoria, BC Head Office Administration: Hours of Operation: 461 Dupplin Rd, Mon to Fri 7:30 am - 5:00 pm [email protected] Victoria, BC V8Z 1B8 Sat: 8:00 am - noon Phone: 250-383-7145 Sun: Closed Sales: Toll-Free: 1-888-444-8497 Fax: 250-385-1216 Hours of Operation: [email protected] [email protected] Mon to Fri 8:00 am - 5:00 pm Sat: Closed Website Support: Courtenay, BC Sun: Closed [email protected] 260B Tsolum Rd, Commercial / Contractor Courtenay, BC V9N 3R2 Sales Only Shipping/Receiving: Phone: 250-338-8737 Mon to Fri 8:00 am - 4:30 pm Toll-Free: 1-800-665-8311 Saturday: Closed [email protected] Fax: 250-338-7933 Sunday: Closed [email protected] Surrey, BC 800-10281 Grace Rd, Surrey, BC V3V 3V7 Phone: 778-357-0257 [email protected]

Index Ground Water Pumps & Equipment Submersible Pumps & Drives........................................................................................................................................... 4 Cistern & Booster Pumps.................................................................................................................................................. 14 Jet Pumps & Controls....................................................................................................................................................... 17 Pressure Tanks................................................................................................................................................................. 18 Specialty Pumps............................................................................................................................................................... 20 DAB Water Technology..................................................................................................................................................... 22 Special Application Pumps................................................................................................................................................ 26 Pipe, Fittings, & Well Components.................................................................................................................................... 27 Water Treatment & Filters Ultraviolet Systems, Lamps & Sleeves............................................................................................................................. 32 Water Conditioners & Media............................................................................................................................................. 38 Filter Housings & Reverse Osmosis................................................................................................................................. 47 Fitler Cartridges................................................................................................................................................................ 51 Chemical Injection Equipment.......................................................................................................................................... 55 Wastewater Control Equipment Sump Pumps.................................................................................................................................................................... 57 Effluent & Sewage Pumps................................................................................................................................................ 58 Panels & Switches............................................................................................................................................................ 65 Septic Tanks & Aeration.................................................................................................................................................... 68 Bacteria Treatment............................................................................................................................................................ 70 Mechanical Components Tubing & Pipe.................................................................................................................................................................... 71 PVC & Poly Fittings........................................................................................................................................................... 72 Valves/Controls, Clamps, & Glue...................................................................................................................................... 83 Tools.................................................................................................................................................................................. 89 Irrigation Equipment Irrigation Timers............................................................................................................................................................... 90 Soaker Hose.................................................................................................................................................................... 91 Micro Irrigation................................................................................................................................................................. 92 Garden Hose & Fittings................................................................................................................................................... 93 Controllers & Nozzles...................................................................................................................................................... 95 Rainwater Management Filters.............................................................................................................................................................................. 97 Tanks............................................................................................................................................................................... 99 Monitors, Guages, & Equipment..................................................................................................................................... 100 This catalogue does not reflect true market retail prices. Pricing is subject to change. Refer to vanislewater.com for accurate pricing.

MOVING WATER. MOVING FORWARD. A Systems Approach To Pumps, Motors, Drives And Controls Founded in 1944, Franklin Electric has grown from a small motor manufacturing company into a global leader in the manufacturing and distribution of products and systems focused on the movement and management of water and fuel. Franklin offers pumps, motors, drives, and controls for use in a wide variety of residential, commercial, agricultural, industrial, and municipal applications. Franklin Electric's principle markets include clean water systems, water transfer and grey water systems. 4 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

DRIVES & CONTROLS PRODUCT COMPARISON Manufactured specifically for water pumping applications by a pump manufacturer, Franklin Electric’s more than 15 years of drive engineering expertise is incorporated into our product designs. FEATURES & PROTECTION SPECIFICATIONS CONTROL PROTECTION VARIABLE FREQUENCY DRIVES (VFD) Control Box QD Pumptec Pumptec Pumptec Plus SubMonitor SubDrive SubDrive SubDrive 15/20/ SubDrive Connect Utility UT2W Utility UT3P 30/50 Connect Connect Plus QD Features Constant Pressure Pumptec     Electrical Filtering QD NEMA 3R NEMA 3R NEMA 3R NEMA 3R Rating NEMA 3R Pumptec NEMA 3R NEMA 3R Base: NEMA 1 Display: NEMA 4X Underload Protection Under/Over Voltage Soft Start Soft Start Soft Start Rapid Cycle Phase Loss Overload/Locked Pump Input/Output/Control Hand/Off/Auto Run/Stop Open Circuit Modbus Hand/Auto Short Circuit Phase Imbalance Accessory, 2 Drives Accessory, 2 Drives Built-in, 2 Drives Built-in, up to 8 Drives Pressure Sensor (Hobbs) Pressure Transducer (4-20mA) Run Relay Output Fault Relay Output Broken Pipe Pressure Sensor Error Auxilliary Control Wet Floor Sensor Lead/Lag/Alternate Mobile App (Setup, Monitoring, Troubleshooting) SUBMERSIBLE MOTORS GOOD:  BETTER:  BEST:  SPECIFICATIONS CONTROL PROTECTION VARIABLE FREQUENCY DRIVES (VFD) Phase Volts Horsepower Control Box Pumptec Pumptec Plus SubMonitor SubDrive SubDrive SubDrive 15/20/ SubDrive 1-Phase 115 V Connect Utility UT2W Utility UT3P 30/50 Connect Connect Plus 2-Wire 230 V 1/3 hp – 1/2 hp 1/3 hp 115 V 1/2 hp – 1.5 hp 1-Phase 3-Wire 230 V 1/3 hp – 1/2 hp 1/3 hp 200 V 3-Phase 230 V 1/2 hp – 1 hp 1.5 hp 460 V 2 hp 3 hp – 5 hp 5 hp – 15 hp 1/2 hp – 30 hp 1/2 hp 1 hp – 2 hp 1.5 hp – 5 hp 5 hp – 15 hp 15 hp – 30 hp 1/2 hp – 30 hp 1/2 hp – 200 hp SURFACE PUMPS SPECIFICATIONS CONTROL PROTECTION VARIABLE FREQUENCY DRIVES (VFD) Phase Volts Horsepower Control Box Pumptec Pumptec Plus SubMonitor SubDrive SubDrive SubDrive 15/20/ SubDrive Connect Utility UT2W Utility UT3P 30/50 Connect Connect Plus 1-Phase 115 V 1/3 hp – 1 hp 2-Wire 230 V 1/2 hp – 2 hp 1/10 hp – 50 hp 200 V 3-Phase 230 V 1/2 hp – 200 hp 1/2 hp – 2 hp 460 V 3 hp – 5 hp 5 hp – 15 hp 15 hp – 400 hp 1/2 hp - 30 hp 30 hp - 500 hp The Water System Experts Ground Water Pumps & Equipment 5

SubDrive Utility Variable Frequency Drives are your quick and easy-to- install multi-tools for 2-wire, 3-wire, and 3-phase requirements in both 115V and 230V applications. Submersible Applications Drive Model 115 V 2-Wire 230 V 2-Wire Item # List UT2W w/ Pressure Sensor 1/3, 1/2 HP 1/2, 3/4, 1, 1.5 HP FRA-5870202003 *UT2W - w/ Analog Pressure Transducer  FRA-5870202003XD *Special Order  Drive Model 230 V 1Ph, 3-Wire 230 V 3Ph Item # List 1/2, 3/4, 1, 1.5, 2 HP 1, 1.5, 2 HP UT3P w/ Pressure Sensor FRA-5870202303 *UT3P - w/ Analog Pressure Transducer   FRA-5870202303XD *Special Order   Drive Model Submersible PSC and Surface Applications 115 V 2-Wire or 230 V 2-Wire Motor Overload Protection Ratings SubDrive Utility UT2W SubDrive Utility UT3P 4.6 A 4.7 A 5.0 A 6.0 A 6.2 A 6.4 A 8.1 A 8.4 A 9.1 A 9.5 A 9.8 A 10.0 A 10.4 A 11.0 A 12.0 A 13.1 A   Franklin Constant Pressure subdrive Connect 3 Wire, 230 Volt Franklin Motor Item # List SDC15 (Old - SD75) 1/2, 3/4, 1 HP Single Phase & 1 & 1 1/2 HP, Three Phase FRA-5870205103 SDC20 (Old - SD100) 1/2, 3/4, 1, 1 1/2 & 2 HP Single Phase & 1, 1 1/2 & 2 HP, Three Phase FRA-5870205303 SDC30 (Old - SD150) 1/2, 3/4, 1, 1 1/2 & 2 HP Single Phase & 1, 1 1/2, 2 & 3 HP Three Phase FRA-5870205403 SDC50 (Old - SD300) 1/2, 3/4, 1, 1 1/2, 2 & 3 HP Single Phase & 1, 1 1/2, 2, 3 & 5 HP Three Phase FRA-5870205503C All above Subdrives have Nema 3R Enclosures. Franklin Control Boxes Deluxe Control Boxes SUBDRIVE DUPLEX ALTERNATOR HP Volts Item # List Deluxe control box has a Balanced workload for parallel systems. built-in magnetic contactor. 1/2 115 FRA-CB05115 Allows a water system to alternate 1/2 230 FRA-CB05 HP Volts Item # List between two parallel pumps controlled by 3/4 230 FRA-CB07 2 230 FRA-CB2D separate SubDrives using the traditional 1 230 FRA-CB1 3 230 FRA-CB3D SubDrive pressure sensor. 1.5 230 FRA-CB15 5 230 FRA-CB5D Item # 2 230 FRA-CB2 FRA-5850012000 3 230 FRA-CB3 7.5 230 FRA-CB75D 5 230 FRA-CB5 7.5 230 FRA-CB75 10 230 FRA-CB100D List 10 230 FRA-CB100 15 230 FRA-CB150D Pumptec Low Water Sensors Description Volt HP Item # List QD - C/B Internal 230 1/3 - 1 FRA-PTQD PT 5800, IR Dual 1/3 - 1.5 FRA-PT5800 Pumptec Plus 1/2 - 5 FRA-PTPLUS 6 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

Pressure Setting Guide Maximum Velocity 8 fT-sec (2.4 m/s) Pressure Sensor Pressure Tank Min Pipe Dia Max GPM (lpm) Set Point (PSI) Pre-charge (± 2 PSI) 1/2\" 4.9 (18.5) 25 18 3/4\" 11.0 (41.6) 30 21 1\" 19.6 (74.2) 35 25 1 1/4\" 30.6 (115.8) 40 28 1 1/2\" 44.1 (166.9) 45 32 2\" 78.3 (296.4) 50 (Factory set) 35 2 1/2\" 176.3 (667.4) 55 39 Pressure Tank Size (Total Capacity) 60 42 Controller Model Minimum Tank Size 65 46 Pump Flow Rating (Less than 12 GPM) 70 49 SD15 or UT3P 2 gallons (7.6 liters) 75 53 SD20/30 or MD-XT 4 gallons (15.1 liters) 80 56 Pump Flow Rating (More than 12 GPM) SubDrive Specifications SD15 4 gallons (15.1 liters) SD20/30 or MD-XT 8 gallons (30.3 liters) UT2W UT3P UT2W 20 gallons (75.7 liters) Input Voltage 115/208/230 230 Required Cooling Flow Phase In SIngle-Phase SIngle-Phase Input Frequency 60 Hz 60Hz Minimum US GPM Required for Motor Cooling in Input Current (max) 20 Amps 20 Amps Water up to 86ºF (30ºC) Power Factor -0.52 -0.52 Casing or 4\" Motor (3-10 HP) 6\" Motor 8\" Motor Output Voltage Variable based Adjusts with Sleeve I.D. 0.25 FT-S 0.50 FT-S 0.25 FT-S Phase Out on frequency frequency Single-Phase Single-Phase (3- Inches (mm) GPM (L/M) GPM (L/M) GPM (L/M) Output Frequency wire) or three-phase (2-wire) Single-Phase (3- 4 (102) 1.2 (4.5) - - wire) Submersible: 35-60 Hz 30-63 Hz / Three- 5 (127) 7 (26.5) -- Phase Submersible: 30-60 Hz / Three- 6 (152) 13 (49) 9 (34) - Phase Surface: 15-60 Hz 7 (178) 20 (76) 25 (95) - 8 (203) 30 (114) 45 (170) 10 (40) 10 (254) 50 (189) 90 (340) 55 (210) Output Current (max) 13.1 Amps 13.2 Amps 12 (305) 80 (303) 140 (530) 110 (420) Factory: 50 PSI Factory: 50 PSI / 14 (356) 110 (416) 200 (760) 170 (645) Pressure Setting / Adjustment Adjustment range: range: 25-80 PSI 25-80 PSI 16 (406) 150 (568) 280 (1060) 245 (930) SubDrive Max Pump Cable Length (in ft) SubDrive Max Pump Cable Length (in ft) Controller 140ºF (60ºC) INSULATION Controller 140ºF (60ºC) INSULATION Model HP 14 12 10 8 6 Model HP 14 12 10 8 6 1/2 400 650 1020 - - SD 15 1 1/2 420 670 1060 - - 3/4 300 - UT2W 480 760 1000 - SD 20 2 320 510 810 1000 - UT3P SD 30 3 240 390 620 990 - 1 250 400 630 990 SD 50 5 - 230 370 590 920 SubDrive Specifications SDC15 SDC20 SDC30 SDC50 Input (From Power Source) Voltage 200 - 250 V/Single Phase 190 - 260 V/Single Phase 190 - 260 V/Single Phase 190 - 260 V/Single Phase Frequency 60 Hz 60 Hz 60 Hz 60 Hz Amps 11.0 A 19.0 A 23.0 A 36.0 A Output Voltage Variable V/Three Phase Variable V/Three Phase Variable V/Three Phase Variable V/Three Phase Output Frequency Variable (30-80 Hz) Variable (30-80 Hz) Variable (30-80 Hz) Variable (30-80 Hz) Output Amps 5.9 A 8.1 A 10.9 A 17.8 A Enclosure NEMA 3R (indoor use) NEMA 3R (indoor use) NEMA 3R (indoor use) NEMA 3R (indoor use) Use with Pump Rating 3/4 HP, 1 HP, 1 1/2 HP 1 HP, 1 1/2 HP, 2 HP 1 1/2 HP, 2 HP, 3 HP 3 or 5 HP Use with Motor Rating 1 1/2 HP, 3 Phase, 230V 2 HP, 3 Phase, 230V 3 HP, 3 Phase, 230V 5 HP, 3 Phase, 230V The Water System Experts Ground Water Pumps & Equipment 7

Franklin Subdrive Performance Charts SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE Pump SUBDRIVE 15 Connect ( 1 1/2 HP - 3ph Motor) Maximum HP End Shut-Off TOTAL DYNAMIC HEAD (TDH) Head ft. GPM 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 3/4 5 8877776543 899' 3/4 7 752' 12 12 11 11 10 9 8 6 3 3/4 10 765' 100 120 140 160 180 200 240 280 320 360 400 440 480 500 550 600 650 3/4 15 467' 1 20 13 13 13 13 13 12 12 11 11 11 10 9 9 9 8 7 6 379' 1 25 297' 1 35 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 226' 20 20 19 19 18 17 16 14 11 8 4 27 26 24 22 20 17 6 33 31 29 27 25 21 19 45 43 40 38 31 27 23 18 SUBDRIVE 20 Connect ( 2 HP - 3ph Motor) 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 17 12 12 11 11 10 9 8 6 3 969' 80 100 120 140 160 180 200 240 260 300 360 400 440 480 500 600 700 800 900 1000 1 10 14 13 13 12 11 10 10 9 6 770' 1 15 20 20 19 18 18 17 15 13 12 10 8 590' 1 20 24 23 20 16 12 453' 1 25 33 32 30 28 25 24 20 375' 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 1 35 45 43 41 38 34 31 28 19 288' SUBDRIVE 30 Connect ( 3 HP - 3ph Motor) 60 80 100 200 300 400 500 600 700 800 900 1000 1100 1200 1300 1400 1.5 7 10 9 9 8 7 7 6 5 4 2 1310' 120 140 160 180 200 240 260 300 360 400 440 480 500 600 700 800 900 1000 1034' 802' 1.5 10 14 13 13 12 12 11 9 7 5 601' 519' 1.5 15 20 20 19 18 17 16 15 15 12 8 396' 1.5 20 24 22 20 18 16 14 265' 1.5 25 33 32 30 29 28 24 22 19 15 167' 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 1.5 35 45 44 42 41 38 32 28 18 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 2 60 70 66 60 53 46 37 2 90 110 96 79 64 49 SUBDRIVE 50 Connect ( 5 HP - 3ph Motor) 100 120 140 160 180 200 240 260 300 340 360 400 440 480 500 600 700 800 900 1000 3 20 24 23 20 16 982' 20 40 60 80 100 120 140 160 180 200 240 260 300 360 400 440 480 500 600 700 3 25 33 32 31 30 28 28 24 20 833' 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 3 35 45 43 40 37 33 30 26 21 12 638' 3 45 54 52 48 43 38 32 26 17 575' 3 60 71 68 65 62 54 42 27 425' 3 90 113 106 96 85 74 64 41 285' All charts above are in U.S. Gallons. Please Contact Us For Charts For Pump Models Not Shown. SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE 8 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

1 Phase, 3 Wire, 4\" Motors HP Amps Volts Item # List 1/2 HP 12.0 115 V FRA-305115 4\" Stainless Steel Submersible Pumps 1/2 HP 6.0 230 V FRA-305230 3200 series 3/4 HP 8.0 230 V FRA-307230 1 HP 9.6 230 V FRA-31230 Item # List Item # List 1.5 HP 11.5 230 V FRA-315230 2 HP 13.2 230 V FRA-32230 HP GPM Series 230V 3 Wire Motor Pump 3 HP 16.5 230 V FRA-33230 & Pump End End Only 5 HP 26.5 230 V FRA-35230 1/2 5 3200 FRA-S55 FRA-LP55 1/2 7 3200 FRA-S57 FRA-LP57 1/2 10 3200 FRA-S510 FRA-LP510 3/4 5 3200 FRA-S75 FRA-LP75 1 Phase, 2 Wire, 4\" Motors 3/4 7 3200 FRA-S77 FRA-LP77 3/4 10 3200 FRA-S710 FRA-LP710 HP Amps Volts Item # List 1/2 HP 12.0 115 V FRA-205115 1 5 3200 FRA-S15 FRA-LP15 1/2 HP 6.0 230 V FRA-205230 3/4 HP 8.0 230 V FRA-207230 1 7 3200 FRA-S17 FRA-LP17 1 HP 9.6 230 V FRA-21230 1.5 HP 13.1 230 V FRA-215230 1 10 3200 FRA-S110 FRA-LP110 4\" Stainless Steel Submersible Pumps tri-seal 4400 series HP GPM Model Item # List 1/2 15 93771505 FRA-LP515 1 Phase, 3 Wire, 6\" Motors 3/4 15 93771510 FRA-LP715 3/4 20 93772010 FRA-LP720 HP Amps Volts Item # List 7.5 HP 40.0 230 V FRA-375230 1 15 93771515 FRA-LP115 10 HP 51.0 230 V FRA-3100230 1 20 93772015 FRA-LP120 1 25 93772515 FRA-LP125 1 1/2 5 93770520 FRA-LP155 1 1/2 7 93770720 FRA-LP157 3 Phase (Specify Voltage) 1 1/2 10 93771020 FRA-LP1510 1 1/2 15 93771520 FRA-LP1515 HP Item # List 1 HP FRA-3PH1HP230 825.00 1 1/2 20 93772020 FRA-LP1520 1.5 HP 4 Inch FRA-3PH15HP230 940.00 2 HP 4 Inch FRA-3PH2HP230 940.00 1 1/2 25 93772520 FRA-LP1525 3 HP 4 Inch FRA-3PH3HP230 1290.00 5 HP 4 Inch FRA-3PH5HP2304IN 2190.00 25 93770525 FRA-LP25 7.5 hp 4 Inch FRA-3PH75HP4IN 10 HP 4 Inch FRA-3PH10HP4IN 27 93770725 FRA-LP27 5 HP 4 Inch FRA-3PH5HP6IN 7.5 hp 6 Inch FRA-3PH75HP6IN 2 10 93771025 FRA-LP210 10 HP 6 Inch FRA-3PH10HP208 10 HP 6 Inch FRA-3PH10HP 2 15 93771525 FRA-LP215 15 HP 6 Inch FRA-3PH15HP 20 HP 6 Inch FRA-3PH20HP 2 20 93772025 FRA-LP220 25 HP 6 Inch FRA-3PH25HP 30 HP 6 Inch FRA-3PH30HP 2 25 93772525 FRA-LP225 40 HP 6 Inch FRA-3PH40HP 50 HP 6 Inch FRA-3PH50HP 3 10 93771030 FRA-LP310 60 HP 6 Inch FRA-3PH60HP 6 Inch 3 20 93772030 FRA-LP320 3 25 93772530 FRA-LP325 4\" Stainless Steel high capacity Submersible pump ends (no check Valve) 1 35 93653505 FRA-LP135 Franklin Motor Leads 1 1/2 35 93653507 FRA-LP1535 1 1/2 45 93654505 FRA-LP1545 SJOOW Motor Lead Jacketed (Sewage 35 93653509 FRA-LP235 Application) 2 45 93654507 FRA-LP245 2 60 93656007 FRA-LP260 2 Wire - 10 ft FRA-ML2 2 90 93659006 FRA-LP290 2 Wire - 25 ft FRA-ML225FT 2 35 93653512 FRA-LP335 3 Wire 10 ft FRA-ML3 3 45 93654510 FRA-LP345 3 60 93656010 FRA-LP360 3 90 93659008 FRA-LP390 3 45 93654516 FRA-LP5045 5 60 93656016 FRA-LP5060 5 90 93659013 FRA-LP5090 5 Please inquire about pricing for pump models not shown. The Water System Experts Ground Water Pumps & Equipment 9

5 GPM 3200 Series Submersible Performance Charts SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE Depth To Pumping Water Level, in Feet. Shut-off 390 ft HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 8887776543 20 8 8 8 7 7 7 6 6 6 4 3 30 8 8 7 7 7 7 6 6 6 5 4 1 1/2 40 8 7 7 7 7 6 6 6 5 5 3 50 7 7 7 7 6 6 5 5 4 4 2 60 7 7 6 6 6 5 5 4 4 3 80 6 6 6 5 5 4 4 3 2 Shut-off PSI 161 12 143 135 126 117 109 100 91 83 61 39 18 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 8888776654 2 20 8 8 8 7 7 7 7 6 6 5 4 2 30 8 8 8 7 7 7 7 7 6 5 4 3 1 Shut-off 541 ft 3/4 40 8 8 8 7 7 7 7 7 6 6 5 4 3 50 8 8 8 7 7 7 7 7 6 6 5 4 3 2 60 8 8 7 7 7 7 6 6 6 6 5 4 3 80 7 7 7 7 6 6 6 6 5 5 4 3 Shut-off PSI 226 217 209 200 191 183 174 165 157 148 126 105 83 61 39 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 88887766552 20 8 8 8 8 7 7 7 6 6 5 5 4 1 Shut-off 666 ft 30 8888777766543 1 40 88887777665543 50 8 8 8 8 7 7 7 7 7 6 6 5 4 3 2 60 8 8 8 7 7 7 7 7 7 6 6 5 5 4 3 1 80 8 7 7 7 7 7 7 6 6 6 5 5 4 3 1 Shut-off PSI 280 271 263 254 245 237 228 219 211 202 180 159 137 115 94 72 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 8887776543 Shut-off 899 ft 20 8 8 8 7 7 7 6 6 5 4 2 30 8 8 8 7 7 7 6 6 6 5 3 1 1 1/2 40 888877766543 50 8888777666543 60 8 8 8 8 8 7 7 7 7 6 6 5 5 4 2 80 8 8 8 8 8 7 7 7 7 7 6 6 5 5 4 3 1 Shut-off PSI 381 372 364 355 346 338 329 320 312 303 281 260 238 216 195 173 130 86 43 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 8887776654 3 20 8 8 8 7 7 7 7 6 5 5 4 2 Shut-off 1152 ft 30 888877776543 2 2 40 8888777766543 1 50 8 8 8 8 8 7 7 7 7 6 6 5 4 3 1 60 8 8 8 8 8 7 7 7 7 6 6 5 5 4 2 80 8 8 8 8 8 8 7 7 7 7 6 6 6 5 4 3 2 Shut-off PSI 491 482 473 465 456 447 439 430 421 413 391 369 348 326 304 282 239 195 152 109 66 SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE 10 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

7 GPM 3200 Series Submersible Performance Charts SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE Depth To Pumping Water Level, in Feet. Shut-off 324 ft HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 12 12 11 11 10 10 9 7 3 20 12 12 11 11 10 9 9 8 7 4 30 12 12 11 11 10 9 9 8 7 6 1 1/2 40 12 11 11 10 9 9 8 7 5 4 50 11 10 10 9 8 8 7 5 4 1 60 10 10 9 8 7 6 5 3 1 80 9 8 7 6 5 3 Shut-off PSI 132 123 115 106 97 89 80 71 63 54 32 10 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 Shut-off 421 ft 0 12 12 11 11 10 9 8 5 2 20 12 12 11 11 10 10 9 8 6 2 30 12 12 11 11 10 10 9 9 7 4 3/4 40 12 11 11 11 10 10 9 9 8 6 3 50 12 11 11 11 10 10 9 8 8 7 5 1 60 11 11 10 10 10 9 8 8 7 6 3 80 10 10 9 9 8 7 7 6 5 3 Shut-off PSI 174 165 156 148 139 130 122 113 104 96 74 52 31 9 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 12 12 12 11 10 9 8 7 5 Shut-off 586 ft 20 12 12 11 11 11 10 9 8 7 5 3 30 12 12 11 11 11 11 10 9 7 6 4 1 1 40 12 12 11 11 11 10 10 9 8 7 5 3 50 12 12 11 11 11 10 10 10 9 8 6 5 2 60 12 12 11 11 11 10 10 10 9 8 7 5 3 80 12 11 11 11 10 10 10 9 9 8 7 6 3 Shut-off PSI 245 237 228 219 211 202 193 185 176 167 146 124 102 81 59 37 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 12 12 11 11 10 9 8 6 3 20 12 12 11 11 10 9 8 7 5 Shut-off 752 ft 30 12 12 12 11 10 10 9 8 7 4 1 1/2 40 12 12 12 11 11 10 9 8 8 6 3 50 12 12 12 11 11 10 10 9 8 7 6 2 60 12 12 11 11 11 11 10 9 9 8 7 5 1 80 12 12 12 11 11 11 11 10 10 9 9 8 7 5 4 Shut-off PSI 317 309 300 291 283 274 265 257 248 239 218 196 174 153 131 109 66 23 HP PSI 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 600 700 800 900 1000 0 12 12 11 11 10 9 8 6 3 Shut-off 969 ft 20 12 12 11 11 10 10 8 7 5 1 30 12 12 11 11 10 10 9 8 6 4 2 40 12 12 12 11 11 10 10 9 8 6 3 50 12 12 12 11 11 10 10 9 9 7 5 3 60 12 12 12 12 11 11 10 10 9 8 7 5 2 80 12 12 12 12 11 11 11 10 10 9 8 8 6 4 Shut-off PSI 411 403 394 385 376 368 359 350 342 333 312 290 268 247 225 203 160 117 73 30 SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE The Water System Experts Ground Water Pumps & Equipment 11

10 GPM 3200 Series Submersible Performance Charts SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE Shut-off 353 ft Depth To Pumping Water Level, in Feet. HP PSI 20 40 60 80 100 120 140 160 180 200 240 280 320 360 400 440 480 500 550 600 700 0 13 13 13 12 12 11 11 10 10 9 8 6 4 10 13 13 12 12 11 11 10 9 9 8 7 5 1 20 12 12 12 11 11 10 9 9 8 7 6 3 30 12 11 11 10 10 9 9 8 7 6 4 1/2 40 11 11 10 10 9 9 8 7 6 5 3 50 11 10 10 9 8 8 7 6 5 4 60 10 10 9 8 8 7 6 5 4 2 70 10 9 8 8 7 6 5 4 2 80 9 9 8 7 7 6 5 3 1 Shut-off PSI 144 135 127 118 110 101 92 84 75 66 49 32 14 Depth To Pumping Water Level, in Feet. Shut-off 455 ft HP PSI 20 40 60 80 100 120 140 160 180 200 240 280 320 360 400 440 480 500 550 600 700 0 14 13 13 13 12 12 12 11 11 10 9 9 7 6 5 2 10 13 13 13 12 12 11 11 11 10 10 9 8 7 5 3 20 13 12 12 12 11 11 11 10 10 9 8 7 6 4 1 30 12 12 12 11 11 11 10 10 9 9 8 7 5 3 3/4 40 12 12 11 11 10 10 10 9 9 8 7 6 4 50 12 11 11 10 10 10 9 9 8 8 6 5 3 60 11 11 10 10 10 9 9 8 8 7 6 4 70 11 10 10 9 9 8 8 7 7 6 5 2 80 10 10 9 9 8 8 7 7 6 5 3 Shut-off PSI 188 180 171 162 154 145 136 128 119 110 93 76 58 41 24 6 Depth To Pumping Water Level, in Feet. Shut-off 618 ft HP PSI 20 40 60 80 100 120 140 160 180 200 240 280 320 360 400 440 480 500 550 600 700 0 14 13 13 13 13 12 12 12 12 11 11 10 9 9 8 7 6 6 4 2 10 13 13 13 13 12 12 12 12 11 11 10 10 9 8 8 7 6 5 3 20 13 13 13 12 12 12 12 11 11 11 10 9 9 8 7 6 5 4 2 30 13 13 12 12 12 11 11 11 11 10 10 9 8 7 7 6 4 4 1 40 12 12 12 12 11 11 11 11 10 10 9 9 8 7 6 5 3 2 50 12 12 12 11 11 11 11 10 10 10 9 8 7 6 5 4 2 60 12 12 11 11 11 10 10 10 10 9 8 8 7 6 5 3 70 12 11 11 11 10 10 10 9 9 9 8 7 6 5 4 2 80 11 11 11 10 10 10 9 9 9 8 8 7 6 4 3 Shut-off PSI 259 250 242 233 224 216 207 198 190 181 164 146 129 112 94 77 60 51 29 Depth To Pumping Water Level, in Feet. HP PSI 20 40 60 80 100 120 140 160 180 200 240 280 320 360 400 440 480 500 550 600 650 700 0 14 14 14 14 13 13 13 13 13 12 12 11 11 11 10 9 9 9 8 7 6 4 10 14 14 14 13 13 13 13 13 12 12 12 11 11 10 10 9 9 8 7 6 5 4 20 14 13 13 13 13 13 12 12 12 12 11 11 10 10 9 9 8 8 7 6 5 3 Shut-off 765 ft 30 13 13 13 13 13 12 12 12 12 12 11 11 10 10 9 8 8 7 7 5 4 1 1/2 40 13 13 13 13 12 12 12 12 12 11 11 10 10 9 9 8 7 7 6 5 3 50 13 13 13 12 12 12 12 12 11 11 11 10 10 9 8 8 7 7 5 4 60 13 13 12 12 12 12 11 11 11 11 10 10 9 9 8 7 7 6 5 3 70 13 12 12 12 12 11 11 11 11 11 10 9 9 8 8 7 6 6 4 80 12 12 12 12 11 11 11 11 10 10 10 9 9 8 7 6 5 5 3 Shut-off PSI 323 314 305 297 288 279 271 262 253 245 227 210 193 175 158 141 123 115 95 71 50 28 SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE 12 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

4\" Submersible Pumps Performance Chart SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE 15 GPM Series (Based on 50 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 240 260 300 360 400 440 480 500 600 S/O ft 1/2 HP Franklin 10 5 170' 3/4 HP Franklin 17 15 13 11 9 5 257' 1 HP Franklin 18 18 17 16 14 13 12 10 8 5 343' 1.5 HP Franklin 20 19 19 18 17 17 16 15 14 13 12 11 7 467' 2 HP Franklin 20 20 19 19 19 18 17 17 16 15 14 13 10 7 4 594' 3 HP Franklin 20 20 20 19 19 19 18 18 17 15 14 13 12 11 7 802' 20 GPM Series (Based on 50 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 240 260 300 360 400 440 480 500 600 700 S/O ft 3/4 HP Franklin 19 16 10 190' 1 HP Franklin 25 23 21 19 16 12 251' 1.5 HP Franklin 27 26 25 23 22 21 19 17 15 7 379' 2 HP Franklin 24 23 22 20 19 16 14 10 453' 3 HP Franklin 24 24 22 21 19 16 13 601' 5 HP Franklin 24 22 20 17 15 982' 25 GPM Series (Based on 50 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 240 260 300 360 400 440 480 500 S/O ft 1 HP Franklin 26 24 21 16 222' 1.5 HP Franklin 32 29 27 25 23 21 18 297' 2 HP Franklin 33 32 30 29 27 26 24 22 20 18 375' 3 HP Franklin 33 32 31 31 30 29 28 27 24 23 21 15 519' 5 HP Franklin 33 33 32 31 30 28 27 25 24 23 19 833' 35 GPM Series (Based on 0 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 550 600 S/O ft 1 HP Franklin 44 40 34 28 22 13 171' 1.5 HP Franklin 45 43 40 36 31 27 23 18 226' 2 HP Franklin 45 43 41 38 34 31 28 19 288' 3 HP Franklin 45 44 42 40 38 32 28 18 396' 5 HP Franklin 45 43 40 37 33 30 26 21 12 638' 45 GPM Series (Based on 0 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 250 300 350 400 450 500 S/O ft 190' 1.5 HP Franklin 52 46 38 30 21 250' 337' 2 HP Franklin 55 51 46 41 36 30 23 17 575' 3 HP Franklin 53 49 46 42 38 27 5 HP Franklin 54 52 48 43 38 32 26 60 GPM Series (Based on 0 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 250 300 350 400 S/O ft 195' 2 HP Franklin 66 57 47 35 21 265' 425' 3 HP Franklin 70 66 60 53 46 37 5 HP Franklin 71 68 65 62 54 42 27 90 GPM Series (Based on 0 PSI DISCHARGE PRESSURE, Flow in US GPM) Depth to Water Level 20 40 60 80 100 120 140 160 180 200 250 300 350 400 S/O ft 120' 2 HP Franklin 113 92 67 48 167' 3 HP Franklin 110 96 79 64 49 SHADED AREAS INDICATE MOST EFFICIENT PERFORMANCE CAUTION: Please note that some charts are based on 50 PSI wellhead discharge pressure and some are based on 0 PSI wellhead discharge pressure. The Water System Experts Ground Water Pumps & Equipment 13

C1 Series Cistern Pumps The C1 Series cistern pump provides high performance and long life in less than ideal water conditions. The C1 Series pump is able to pass solids up to 1/8”. The pump’s unique bottom suction design allows for maximum fluid draw down without the use of a flow induction sleeve. Features: Applications: • Supplied with a removable 5” base for secure and reliable mounting. • Grey water. • Robust thermoplastic discharge head with SS insert design resists breakage. • Filtered effluent. • Optimized hydraulic design allows for increased performance and decreased power usage. • Rain catchment • All metal components are made of high grade stainless steel for corrosion resistance. • Fluid flows of 10 and 20 gpm, with a max shut-off pressure of over 97 PSI. basins. • No control box necessary. • Fountain or pond • Cord length 10' - 2 Wire (No Plug). • Heavy duty 600 V 10 foot SJOOW jacketed wire lead. applications. Model # Voltage Item # List Model # Voltage Item # List 10 FPS-90301005 10 FPS-90301010 20 FPS-90302005 20 FPS-90302010 20X 115 FPS-90302015 20X 230 FPS-90302020 FPS-90303005 FPS-90303010 30 30 SERIES PSI 30 40 50 60 MAX PSI Amps 10 GPM 14 13 11 9 97 5 20 GPM 24 18 11 - 60 5 20x GPM 25 21 12 5 73 5 30 GPM 26 6 x x 40 5 Inline 400 Pressure Boosting System The Inline 400 is designed to be compact and an economical way to meet all of your pressure needs. The unit's symmetrical design allows for easy installation (mounting either vertically or horizontally) while also enabling it to work with your existing plumbing configuration. Features: • The Inline 400 can increase your existing inlet water pressure up to 50 PSI. • Utilizes proven Franklin Electric pump and motor to create the most trustworthy product on the market. • Simple flow-based controls mean you get the pressure every time you need it. • Whisper quiet operation. Applications: • 1\" FIPT Inlet and Outlet. • City water pressure boosting. • 10' plug-in electrical cord connected unit. • Pressurize water from cistern tank. • Product Power Rating: 1/3 HP, 0.246 kw. • Re-pressurizing after filtration. • Maximum Water Temperature: 120ºF / 49ºC. • Irrigation system boosting. Voltage Item # List Voltage Item # List 115 FPS-92061501 230 FPS-92061502 PSI 20 30 40 50 MAX PSI Amps 6.6 / 3.3 Inline 400 GPM 18 15 12 6 55 Divertron Ecodiver Multipurpose submersible pressure pumps for The Divertron’s integral electronics are use in wells, cisterns, lakes, and other places programmed to start and stop the pump for dewatering and irrigation. Perfect for automatically when a valve or tap is rainwater harvesting applications! opened or closed, so it is useful for sprinkling and washing applications. • Energy efficient motor with double ball The pump will also stop in the event of bearing construction, stainless steel shaft running dry. It has a stainless steel shaft and motor housing; plus built in overload fitted with dual lip seals, an integral protection. starting capacitor, a check valve, and is supplied with a 48’ power cord. • Environmentally safe, oil-free. • Perfect cooling allows running of pump • Warranty 1 Year. even if only partially submerged. Model HP Watts Item # List * • Stainless steel intake screen. 1000 3/4 1000 LEA-DT1000 • Cord length 16’. 1200 1 1100 LEA-DT1200 • Warranty 1 Year. 1200X* 1 1100 LEA-DT1200X Model HP Watts Item # List 750 1/2 650 LEA-ED750 1000 3/4 900 LEA-ED1000 Max PSI 1200 1 1100 LEA-ED1200 SO 35 GPM Flow @ Feet of Head Max PSI GPM Flow @ Feet of Head 52 30’ 45’ 60’ 75’ 90' 105’ 120' 135' SO 64 23’ 35’ 46’ 69’ 92’ 115’ - 1000 22 20 18 13 8 6 52 750 20 17 15 8 - 2 1000 8 1200 23 22 21 19 18 14 11 6 69 1200 22 19 17 12 8 1200X 23 22 21 19 18 14 11 6 68 23 20 19 15 12 14 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

200 1 hp 600 250 ¾ hp 5 GPM 5 GPM 4\" SUBMERSIBLE DEEP WELL PUMPS 150 500 • 1/2 HP to 1 HP single-phase 2-wire motors. 300 200700 • 3 performance ranges - 5, 8, and 12 GPM. • Available with thermoplastic discharge and motor 200 600 4010hp½ hp bracket. • Ceramic bearing sleeve for durability. 250 150 100 • Hex rubber bearing has an extra large surface to 30¾0 hp assure shaft stability and multiple flow channels to 150 500 keep small particles away from bearing surfaces. 200 100 • Celcon® disk allows for close tolerances for increased performance. 200 • Acetal disk facilitates close tolerances for increased 100 50 400 performance.. 150 ½ hp • Stainless steel up thrust washer prevents excessive 50 100 wear in severe applications. 300 • Built-in, Flomatic® check valve keeps water in the system at all times. • Removable suction screen prevents debris 1000 0 50000 1 23 4 5 67 8 GPM 150 200 0.5 1.0 1.5 M3PH from clogging impellers and provides full flow Meters 0 performance. PSI 23 0.5 Feet 1 hp 50 200 ¾ hp ½ hp • Stainless steel shaft features high quality, premium 50 1 hp materials at a competitive price. 01 • Powered bliymFiteradnwklainrrEanletcy.t5ricGSPupMer Stainless Motor. 125 100 0 • Two-year 400 1 hp ¾ hp 8 GPM ¾ hp 1 Item # GPM Wire HP Volts Price 0 0 1500 0 4 5 67 8 GPM 100 1.0 1.5 M3PH LG-558551 5 2-Wire 1/2 115 Meters LG-558552 5 2-Wire 3/4 230 PSI 0300 Feet LG-558553 5 2-Wire 1 230 ½ hp LG-558557 8 2-Wire 1/2 115 75 LG-558558 8 2-Wire 1/2 230 100 LG-558559 8 2-Wire 3/4 230 200 LG-558560 8 2-Wire 1 230 50 450 LG-558564 12 2-Wire 1/2 115 LG-558565 12 2-Wire 1/2 230 LG-558566 12 2-Wire 3/4 230 50 100 LG-558567 12 2-Wire 1 230 400 125 1 hp 25175 1-1/4” FNPT Discharge 150 350 23 4 5 3.40 7 8 GPM 100 0 0 0 0 1 23 45 67 8 912 G10 PM11 12 GPM 0.5 1.0 6 1.5 M3PH Meters 0.5 1.0 1.5 M3PH PSI 2.0 2.5 Feet 450 300 0¾ hp 125 3.90 125 71575 4002510hp 100 ½ hp 12.03 150 350200 27.07 100 75 12 GPM 2.15 50 30015¾0 hp 125 50 75 250100 21500 ½ hp 22500 50 50 75 10 11 12 13 14 15 16 17 18 19 20 GPM 0 1050 0 0 1 2 3 4 5 6 7 8 9 Meters PSI M3PH Feet 50 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 100 9.51 25 25 50 12 GPM 0 0 0 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 GPM Meters 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 M3PH PSI Feet ½ hp Ground Water Pumps & Equipment 15 The Water System Experts

Inline Controls Franklin Electric’s Inline Controls include five pump starting and control devices that pair with a variety of submersible or surface pumps up to 20 amps (or approximately 3 hp) to provide or boost the system’s overall water pressure – in many cases, without the need of an additional bladder tank. • Built-in Control: Allows pump to start automatically, on- demand. • Simplified Installation: Reduces time, labor and the need for heavy equipment in applications where a buried tank would have been used. • Built-in Control: Allows pump to start automatically, on- demand. • Automatic Restart Feature: Eliminates the need to manually activate the pump after a system fault. • System Reliability: Built-in pump dry-run protection, check valve, and dead-head prevention. Voltage Description Item # List 115/230 FLW series, max 15 amp, 1\" MNPT FRA-91987102 115/230 SWC series, max 16 amp, 1\" MNPT FRA-91987103 Inline adj series, max 16 amp, 1\" MNPT FRA-91987105 115 Inline adj series, max 16 amp, 1\" MNPT FRA-91987106 230 Model Flow Based Run Dry Low-Pressure Replaces Positive Includes Adjustable Description Pump Protection Backup Pressure Switch Suction Lift Pressure Low-Pressure Backup Activation Inline FLW Activation √ Activation and Tank - Gauge Inline SWC √ √ - √ √ - - InlineADJ 115/230 V √ √ √ √ - - √ √ √ √ √ √ BT4 Booster Pumps Multi-Stage Ss Centrifugal Pumps The BT4 horizontal booster pump is a low to medium The FPS MH Series is offered in capacity, high pressure, multi-stage unit. It can function three flow rates (15, 30 & 45 GPM) as a multi-purpose high pressure pump, boosting water and five horsepower sizes (1/2-2 pressure from either city mains or private water systems. HP 1-phase or 3-phase). Pressure Also ideal for applications that require more pressure than capabilities to 140 PSI. flow. 25 curves across 100 models to choose from. • All 300 Series Stainless Steel wetted components. • Able to pump fluids at temperatures up to 225 °F. • Stainless steel discharge • Can operate in suction lift installation up to 10 feet. head on all models. Series Pump Model HP Voltage Ph Item # List • Available with Cast Iron or Stainless Steel motor 15FMH1S4 1 115/230 1 FPS-96061502 bracket. 15 GPM 15FMH15S5 1 1/2 115/230 1 FPS-96061503 • 1\" suction and 1\" discharge for all models. 15FMH2S6 2 115/230 1 FPS-96061504 • 1/2 to 2 HP motors are 115/ 30FMH1S3 1 115/230 1 FPS-96063001 230V, 3 HP are 230V only. 30 GPM 30FMH15S4 1 1/2 115/230 1 FPS-96063002 • Shut-off pressures up to 270 PSI, flow rates from 5 to 25 gpm, and temperatures up to 120° F / 49° C. 30FMH2S5 2 115/230 1 FPS-96063003 Applications: 45 GPM 45FMH15S2 1 1/2 115/230 1 FPS-96064500 45FMH2S3 2 115/230 1 FPS-96064501 • Boosting water pressure from either city mains or private water systems 15FMH1S4 Flow in US GPM SO 15FMH15S5 Total Head in Feet FT • Pressure washing buildings and floors 15FMH2S6 50 70 100 130 160 190 220 250 203 • Poultry houses 30FMH1S3 - 25 21 17 12 5 - - 256 • Spray cooling equipment 30FMH15S4 - 27 25 22 19 15 10 4 312 • Lawn and crop irrigation 30FMH2S5 - - 26 24 21 19 16 12 160 • Evaporative cooling system misters 45FMH15S2 43 40 32 22 - - - - 215 • Water circulation 45FMH2S3 44 42 38 33 26 15 - - 268 • General purpose pumping - 44 41 38 34 28 21 - 109 • Reverse osmosis - stainless steel BT4 - 59 26 - - - - - 164 • Filtration - stainless steel BT4 - - 58 42 9 - - - View stocking models on our website. Inquire about a model to suit your application. 16 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

INLINE CONTROL PACKAGES Franklin Versajet Pumps VERSAJET W/ SWC CONTROL • Shallow well ONLY. • Plastic impeller. Specifically built for water • Inlet 1 1/4\" FIPT, Outlet 1\" pumping applications, Inline Control Packages are comprised FIPT. of two proven products that have • c/w 30/50 pressure switch. been combined, optimized, and • Pressure gauge Not Included. engineered to work together • Packages come complete without the Model HP Voltage Item # List need for on-site wiring - just plug and play. JVJ05CI 1/2 HP 115/230 FPS-91180005 • Boosts water pressure with consistent output and no maintenance. JVJ07CI 3/4 HP 115/230 FPS-91180007 • Eliminates the need for a pressure switch and, in most instances, a pressure tank. JVJ1CI-PRO 1 HP 115/230 FPS-91180010 • Control provides run-dry protection to the pump and an auto-run feature to keep the system free of Pressure Guage not included, use PA-PG100, or PG100CBM2 debris and clogs if idle for more than 24 hours. Based on 5' Suction lift, Flow in US GPM SO Discharge PSI 30 40 50 60 PSI Model Nozzle B 10.1 8.5 4.9 2.1 70 JVJ05CI C 8.3 7.6 6.3 4.0 86 A 12.1 5.2 - - 47 Pump HP Item # List D 14.7 14.1 9.6 4.8 73 1/2 FPS-91180105 JVJ07CI C 15.1 14.1 9.0 3.8 70 VersaJet Inline A 18.4 11.6 - - 47 SWC 3/4 FPS-91180107 66 B 28.2 27.8 24.0 11.6 72 JVJC1 PRO C 27.9 27.6 26.8 15.5 59 A 29.5 29.2 19.5 - Thermoplastic Jet Pumps • Shallow well ONLY. Deep Well Convertible Jet Pump - • Plastic impeller. Little Giant • Inlet 1 1/4\" FIPT, Outlet 1\" FIPT. • c/w 30/50 pressure switch. • Shallow and deep well. • Pressure gauge Not Included • Plastic impeller. • Pressure gauge Included. Model HP Voltage Item # List • c/w 30/50 pressure switch. JCY05P 1/2 HP • Inlet 1 1/4\" FIPT, Outlet 1\" FIPT. JCY07P 3/4 HP 115/230 FPS-91090005 Model HP Voltage Item # List 115/230 FPS-91090007 115/230 LG-558282 JPC-075-C 3/4 Based on 5' Suction lift, Flow in US GPM Based on 5' Suction lift, Flow in US GPM SO SO PSI PSI 30 35 40 45 50 55 60 71 PSI 30 35 40 45 50 55 60 65 PSI JPC-075-C 17.7 16.6 14.3 12.0 9.7 7.4 5.1 5CY 12 10.7 9.1 7.2 4.9 2.8 .09 - 62 7CY - 16 14.4 12.6 10.6 8.3 5.0 1.8 68 Pro Convertible Jet Pump C Series Cast Iron Jet Pumps • Stainless Steel impeller. • Shallow and deep well. • Inlet 1 1/4\" FIPT, Outlet 1\" FIPT. • Stainless Steel impeller. • c/w 30/50 pressure switch. • Inlet 1 1/4\" FIPT, Outlet 3/4\" FIPT. • Pressure gauge Included. • c/w 30/50 Pressure Switch. • Pressure gauge Included. Model HP Voltage Item # List • Includes Shallow Well Injector (Deep Well Injector FP1C1-C 1 HP extra). 115/230 FPS-91140010 Model HP Voltage Item # List JC05CI-C 1/2 HP 115/230 FPS-91060020 Based on 5' Suction lift, Flow in US GPM JC07CI-C 3/4 HP 115/230 FPS-91060053 SO Cock Valve EXTRA ( if required for deep well use) PSI 30 35 40 45 50 55 60 65 70 PSI FP1C1-C - - - 16.8 14.0 11.1 8.1 5.0 1.8 73 Based on 5' Suction lift, Flow in US GPM SO PSI High Pressure Injector 60 65 70 75 80 85 PSI 30 35 40 45 50 63 1 RM 2 11.2 8.9 6.8 4.9 3.1 1.4 84.2 5C 12 12 10.5 8 6 61 7C 18.5 17.5 15.5 12.5 9.5 The Water System Experts Ground Water Pumps & Equipment 17

Flexcon FLEX 2 PRO Engineered with the contractor in mind, the improved Flexcon FLEX 2 PRO comes standard with a stainless steel water connection, and it’s the only well water tank in this category offering CAD-2 diaphragm technology and a silver-ion-infused antimicrobial liner that helps limit possible water born health hazards.. The result is superior air and water separation with unmatched performance. FLEX 2 PRO, high-end features, for less. Item # Volume Height Diameter Connection Total Weight Price In Cm Lbs Kg FLX-BF2P20 Gal L In Cm 16 40.64 1” NPT 36 16.3 FLX-BF2P32 16 40.64 1” NPT 49.5 22.5 FLX-BF2P44 20 80 29.42 74.73 21 53.34 1 1/4” NPT 67 30.4 FLX-BF2P65 21 53.34 1 1/4” NPT 82 37.2 33 130 43 110.28 44 170 37.39 94.97 62 240 48 122.19 Flexcon Well Rite Pressure Tanks Well Rite tanks feature stainless Description Gallons Item # List steel inlet ports and have a patented, controlled action, 3/4” MPT Vertical 2.1 FLX-PJR6 double diaphragm assembly that is completely contained in a 3/4” MPT Vertical 4.8 FLX-PJR15 pre-pressurized air cushion that reduces condensation and regulates 3/4” MPT Vertical 8.5 FLX-PJR25 diaphragm action. Clean, airtight welds are achieved using the 3/4” MPT Horizontal PMB 8.5 FLX-PJR25S most modern welding equipment available. Well Rite tanks undergo 1” MPT Horizontal PMB 14 FLX-PJR44S comprehensive testing and are finished with appliance quality paint Use 1\" x 11” Tank Tee 14 FLX-WR45 over a primer coat, which combines durability and high luster. 5 Year Use 1\" x 11” Tank Tee 20 FLX-WR60 Limited Warranty, additional 2 years available. Use 1\" x 11” Tank Tee 26 FLX-WR80 Use 1\" x 11” Tank Tee 33 FLX-WR120 Use 14” Tank Tee + 11/4x1 Bush 32 FLX-WR100 Use 14” Tank Tee + 11/4x1 Bush 44 FLX-WR140 Use 14” Tank Tee + 11/4x1 Bush 62 FLX-WR200 Use 14” Tank Tee + 11/4x1 Bush 81 FLX-WR240 Maximum working pressure: 125 PSI. Use 14” Tank Tee + 11/4x1 Bush 85 FLX-WR260 Use 14” Tank Tee + 11/4x1 Bush 119 FLX-WR360 Flexlite Pressure Tanks Proven performance of Flexcon's steel tanks with the lightweight, non-corrosive features of a composite tank. • Top and bottom domes: Injection molded co-polymer polypropylene. • Shell: Extruded co-polymer polypropylene. • Factory precharge 38 PSI. • Outer shell: Fiberglass-wound, coated with epoxy resin. • Connection: Rigid PVC, 1” or 11/4” MPT. Model MPT Gal Item # List FL 7 1\" 22 FLX-FL7 FL 12 1\" 35 FLX-FL12 Flexcon Mix Master Flexcon’s Mix Master baffle tank is one of the most effective High Mixing Disinfection Systems currently available. New anti-microbial baffle design ensures uniform mixing and exceeds health agency contact time standards. Turbulent water exits diffuser cap at top of standpipe beginning the first stage of mixing process. This remains true even when water is flowing continuously. With a 0.6 baffle factor, as tested by the Water Quality Association test labs, it also takes up less space because one tank does the work of 4 normal tanks. Item # Volume Height Floor to CL Diameter Threaded FPT Total Weight Price Gal L In Cm In Cm In Cm Connection Lbs Kg FLX-BAF80 90 303 57 108 2.25 5.7 24 61.4 1 1/4” NPT 1 1/4” 73 33 FLX-BAF120 119 450 72.1 181.6 2.25 5.7 24 61.4 1 1/4” NPT 1 1/4” 83.5 38 18 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

Flow-Thru Pressure Tanks Flexlite Retention Tanks These no bladder tanks are ideal for a The Flow-Thru connection diverts variety of uses including commercial and system water into and, more residential storage, chlorine/chemical importantly, out of the tank while contact, degassing and many other the pump is running. This constant applications. flushing action assures that the water in the tank remains as fresh • No bladder tank. as possible and eliminates the • Top and bottom domes: Injection molded possibility of stagnant water during normal system operations. The copolymer polypropylene. Flow-Thru features a 16-gauge • Shell: Extruded copolymer polypropylene solid steel tank finished with the • Outer shell: Fiberglass-wound, coated highest quality urethane paint. Assuredly tested with a 100% with epoxy resin. pressure helium test and backed by • Base: Injection molded high-impact ABS. a five year warranty. • Bottom connection: 1 1/4\" PVC Socket in/out. 5 Year Limited Warranty • Top port fitting: 1 1/4\" FIPT Stainless Steel reinforcement ring encapsulated in precision molded top dome. Connection Gallons Item # List Model Volume Item # List 1” MPT SS Nipple 4.5 FLX-FT18 FLU 80 80 gal FLX-FLU80 1 1/4” MPT SS Tee 20 FLX-FT66 FLU 120 120 gal FLX-FLU120 Maximum working pressure: 125 PSI. Composite FLU Tank Dimensions PVC Socket in/out glue connection 1 1/4\" SCH 80 Top Port FIPT 1 1/4\" A simple way of calculating the correct size of a pressure tank for a conventional pump system is Total A B C D Total to multiply the pump’s nominal flow rate by 6. For example, a nominal flow rate of 6 gpm x 6 = a 36 Tank Floor CL to Weight gallon tank, so using a 33 or 44 gallon tank would be fine. For a nominal flow of 10 gpm, use a 62 or 85 Volume Height to CL Diameter fitting end gallon tank. It is never a mistake to go larger as it is FLU gal liters in cm in cm in cm in cm lbs kg always good to extend a pump’s cycle time. 40 40 151.4 53.4 135.6 1.75 4.4 16.5 41.9 15.5 39.4 25 11.3 80 80 310.4 64.1 162.8 2.25 5.7 21.4 54.4 18.3 46.5 41 18.6 120 120 450.5 71.5 181.6 2.25 5.7 24.2 61.5 20.2 51.3 61 27.7 Maximum working pressure: 100 PSI. Maximum working temperature, internal & external: 120º F. WELL RITE PRESSURE TANKS (Stainless Steel Inlet Port) Total Tank Total Drawdown* Volume Height Diameter Total Weight Connec- Model 20/40 30/50 40/60 in cm in cm lbs kilos tion gal liters gal liters PJR6 2.1 8 gal liters gal liters 8 20 5 2.3 3/4” .8 2.9 .7 2.5 .6 2.1 12 30 PJR15 4.8 18 1.7 6.6 1.5 5.6 1.3 4.8 14.5 37 11 24 10 4.6 3/4” PJR25 8.5 32 3.1 11.7 2.6 9.8 2.3 8.7 20 51 12.5 32 13 6.9 3/4” PJR25S 8.5 32 3.1 11.7 2.6 9.8 2.3 8.7 17 43.2 12.5 32 13 6.9 3/4” PJR44S 14 53 5.1 19.3 4.3 16.4 3.8 14.2 20.8 52.8 16.3 41.4 27 12.3 1” WR45 14 60 5.6 21.35 4.8 18.1 4.1 15.6 22 55.88 16 40.64 28.0 12.7 1” WR60 20 80 8.1 30.51 6.8 25.8 5.9 22.3 29 73.66 16 40.64 36.0 16.3 1” WR80 26 100 10.5 39.66 8.9 33.6 7.7 29.0 34.5 87.63 16 40.64 41.0 18.6 1” WR120 33 130 13.3 50.34 11.3 42.6 9.7 36.8 42.75 108.58 16 40.64 49.0 22.2 1” WR100 32 120 12.9 48.81 10.9 41.3 9.4 35.7 27.75 70.48 21 53.34 54.0 24.5 11⁄4” WR140 44 170 17.7 67.12 15.0 56.8 13.0 49.1 36.25 92.07 21 53.34 67.0 30.4 11⁄4” WR200 62 240 25.0 94.57 21.1 80.0 18.3 69.2 48 121.92 21 53.34 82.0 37.2 11⁄4” WR240 81 310 32.6 123.6 27.6 104.5 23.9 90.4 62 157.48 21 53.34 99.0 44.9 11⁄4” WR260 85 325 34.3 129.7 29.0 109.7 25.1 94.9 44.5 113.03 26 66.04 121.0 54.9 11⁄4” WR360 119 450 48.0 181.5 40.6 153.6 35.1 132.9 59.75 150.49 26 66.04 153.0 69.5 11⁄4” * Total drawdown assumes pre-charge set 2 PSI below cut-in pressure. Drawdown is affected by temperature, pressure, and elevation. Maximum working pressure 125 PSI. Maximum working temperature, 140º F. Tank pre-charge PJR6 - PJR44S 28 PSI, WR45 - WR360 38 PSI. Butyl rubber diaphgram handles up to 2500 ppm chlorine. FLEXLITE COMPOSITE PRESSURE TANKS Total Tank Total Drawdown* Model Volume 20/40 30/50 40/60 Height Diameter Total Weight Connection gal liters gal liters gal liters gal liters in cm in cm lbs kilos 1” NPT FL 5 15 60 6.0 24.1 5.1 20.4 4.4 17.7 25.2 64.0 16.5 41.9 15 6.8 FL 7 22 80 8.8 32.2 7.5 27.2 6.5 23.6 33.1 84.1 16.5 41.9 18 8.2 1” NPT FL 12 35 130 14.1 52.3 11.9 44.2 10.3 38.3 47.9 121.7 16.5 41.9 26 11.8 1” NPT FL 17 50 190 20.1 76.4 17.0 64.6 14.7 56.0 42.9 109.0 21.4 54.4 41 18.6 1 1/4” NPT FL 22 65 250 26.1 100.5 22.1 85.0 19.1 73.6 50.9 129.3 21.4 54.4 51 23.1 1 1/4” NPT FL 28 82 300 33.0 120.7 27.9 102.0 24.1 88.4 64.3 163.3 21.4 54.4 62 28.1 1 1/4” NPT FL 30 90 340 36.2 136.7 30.6 115.6 26.5 100.1 56.6 143.8 24.2 61.5 72 32.7 1 1/4” NPT FL 40 119 450 47.9 181.0 40.5 153.0 35.0 132.5 71.7 182.1 24.2 61.5 91 41.3 1 1/4” NPT * Total drawdown assumes pre-charge set 2 PSI below cut-in pressure. Drawdown is affected by temperature, pressure, and elevation. Maximum working pressure is 125 PSI. Maximum working temperature, 120º F. FLOW-THRU PRESSURE TANKS Total Tank Total Drawdown* Volume Height Diameter Total Weight Model 20/40 30/50 Connection gal liters gal liters gal liters in cm in cm lbs kilos FT 18 4.5 18 1.03 4.14 1.08 4.32 13.25 37.0 11.0 28.0 10.0 4.6 1” NPT FT 66 20 80 4.60 18.40 4.80 19.20 29.0 73.66 16.0 40.64 36.0 16.4 1 1/4” NPT FT 144 44 170 10.12 39.10 10.56 40.80 36.25 92.07 21.0 53.34 68.0 30.9 1 1/4” NPT * Total drawdown assumes pre-charge set 2 PSI below cut-in pressure. Drawdown is affected by temperature, pressure, and elevation. Maximum working pressure is 125 PSI. Maximum working temperature, 120º F. The Water System Experts Ground Water Pumps & Equipment 19

FAOT FRAME MOUNT Centrifugal Pumps LGDR Series FAOT end suction centrifugal pumps can These close-coupled end suction be either belt or direct drive through a centrifugal pumps offer robust flexible coupling. This allows the option of construction and design to enable connecting these pumps to the motor or handling a wide array of applications engine of your choice. Open impeller such as water circulation, booster service, liquid transfer, spraying systems, jockey Model Disc. Item # List pump and other general service pumping. FAOT-4 1 x 1 1/4 FPS-90251004 FAOT-5 1 1/4 x 1 1/2 FPS-90251005 To ensure improved energy efficiency in clean FAOT-6 1 1/2 x 2 FPS-90251006 water pumps in Canada, a new regulation (NRCan Amendment 16) mirrors DOE requirements. These pumps carry an energy efficiency verification mark that meets these SCC requirements. Flow in US GPM Model HP Voltage Item # List Transm. Pumps based on 3450 RPM LGDR1S05-CP 1/2 115/230 LG-558255 FAOT 30' 40' 50' 60' 70' 80' 100' 120' SO LGDR1S07-CP 3/4 115/230 LG-558256 4 72 60 40 8 62 LGDR1S1-CP 1 115/230 LG-558257 5 95 86 72 40 68 6 X X 120 105 85 60 87 FRANKLIN Turf Boss Model 30' 40' 50' 60' 70' 80' 90' 100' SO LGDR1S05-CP 59 53 46 39 29 - - - 85' These self priming pumps cover LGDR1S07-CP - 59 54 47 40 31 21 - 97' a wide range of applications LGDR1S1-CP - - 58 53 47 40 32 24 111' and are ideal for lawn or turf sprinkling or as a standby pump FAC End Suction Centrifugal Pumps for fire protection. The versatile FAC Centrifugal Pump is High Head Self Priming Pumps constructed from durable cast iron and includes a carbon/ceramic mechanical Model HP Voltage Disc. Item # List seal with FKM elastomer. With a maximum temperature of 212°F and vertical or FTB3CI 3 2 x 2 FPS-92980030 horizontal mounting orientations, this pump is ideal for numerous applications. FTB5CI 5 230 2 1/2 x 2 FPS-92980050 Turf Boss Less Power (Call For Motor Pricing) Model HP Voltage Disc. Item # List List FAC-300S 3 230 2 x 2 FPS-90210030 Model Motor Disc. Item # List FAC-500S 5 230 2 x 2 FPS-90210050 FTB3CI-PE 145JM-3 HP 2 x 2 FPS-92980033 FAC Less Power FTB5CI-PE 184JM-5 HP 2 1/2 x 2 FPS-92980053 Model Motor Disc. Item # 2x2 FPS-90220030 US GPM Flow FAC-300-K 145JM-3 HP 2x2 FPS-90220050 NSPHE / SPHE based on 5' Suction Lift FAC-500-K 184JM-5 HP 10 20 30 40 50 60 Max Flow in US GPM PSI PSI PSI PSI PSI PSI PSI 59 FAC 40' 50' 60' 70' 80' 100' 120' 140' 160' 74 3 HP 122 118 113 109 101 85 66 45 - FTB3CI 124 110 95 77 54 - 5 HP FTB5CI 150 147 144 140 136 125 110 96 76 170 165 146 128 109 85 Franklin End Suction Centrifugal Pump End Kits HC-Series Industrial Pumps Design Data: Franklin HC Series horizontal • Suction Sizes: Flanged 3” to 10” (150# ANSI). centrifugal pumps are constructed • Discharge Sizes: 1-1/2” to 10”. of premium ductile iron with superior • Max Capacity: to 6000 GPM, Max HP: 200 HP. NPSH characteristics. Close • Max Total Dynamic Head (TDH): To 450 ft. Coupled, Bearing Frame, and SAE Mounting configurations available. Features: • Heavy-duty cast iron body for increased durability. Model Motor • DA1A to DB2 have bronze impellers, DB3 to DC4 HP Frame RPM Item # List DA1A 1/3 to 1 56C 3500 FPS-93R011 have cast iron impellers. DA1B 1/2 to 2 56C 3500 FPS-93R021 • Impellers must be trimmed to match motor DB1-1/2 K 1/3 to 1 56C 1750 FPS-93R252 DB1-1/2 K1 1 to 3 56C 3500 FPS-93R072 horsepower. DB1-1/2 K2 5 to 7 1/2 182-184JM 3500 FPS-93R083 • 1/3-2HP models have shaft coupling for 56C frame DC1-1/2 K3 10 to 15 213-215JM 3500 FPS-93R173 DB2-K1 1 to 1 1/2 56C 1750 FPS-93R272 motors. DB2-K2 5 to 7 1/2 182-184JM 3500 FPS-93R113 • 5-50HP models use JM/JP motors with stainless DB2-K3 10 213-215JM 3500 FPS-93R123 steel shaft sleeve/O-Ring design. • 3HP models are either JM frame or 56C frame. • Max operating pressures 150 PSI. • Maximum operating temperature 212º F. Please Note: Motor Is Not Included In Price 20 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

Shallow Well Jet Pumps 1/2 HP Shallow Well Jet Pump & Pressure Tank Ideal for the supply of fresh water to rural homes, farms, and cabins that Ideal for the supply of fresh water have suction lifts down to 25'. to rural homes, farms, and cabins • Shallow well jet pump - ideal that have suction lifts down to 25'. for use in pumping at depths of 25' • Jet pump and pre-charged or less. pressure tank are factory • Pressure gauge NOT Included. assembled and ready to install. • Inlet 1 1/4\" FIPT, Outlet 1\" FIPT. • Pump casing is made of rugged • c/w 30/50 pressure switch. cast iron. • Heavy-duty cast iron construction - for years of service and • Low profile, compact horizontal pressure tank. reliability. • c/w 30/50 pressure switch. • Pressure gauge NOT Included. Model HP Voltage Item # List RL-SWJ50 1/2 115/230 RL-97080502 RL-SWJ75 3/4 115/230 RL-97080701 Model HP Voltage Item # List RL-SWJ100 1 115/230 RL-97081001 RL-SWJ50/RL6H 1/2 115/230 RL-97080503 Based on 5' Suction lift, Flow in US GPM SO Based on 5' Suction lift, Flow in US GPM SO PSI PSI PSI 20 30 40 50 60 64 PSI 20 30 40 50 60 64 70 RL-SWJ50 13.6 12.6 7.3 3.4 1 74 RL-SWJ50 13.6 12.6 7.3 3.4 1 RL-SWJ75 13.4 13 9.1 4.8 1.5 RL-SWJ100 17.3 17 12.9 8.5 44 Multi-Purpose Transfer Pump SS Sprinkler Utility Pump Ideal for draining hot water tanks, appliances, and For pressure boosting, sprinkler aquariums as well as water List systems, and general purpose transfer applications where applications where portability easy portability is required. and corrosion-resistance is important. • Portable non-submersible • Self-priming utility pump transfer pump. designed to lift water up to 25'. • Stainless steel construction. • Corrosion resistant stainless steel pump • Includes replacement impeller kit. • Includes hoses and suction attachment. housing ideal for operating lawn sprinklers, pressure boosting, and other general purpose Model Amps Volts Connection Item # applications. MPFVK115 1.6 115 3/4\" GHT RL-14942015 • Includes cord, carry handle, and garden hose adapter. MPFV12 7 12 v DC 3/4\" GHT RL-14942004 • Inlet/Outlet 1\" FIPT. • 2 year warranty. Model HP Voltage Item # List 12V Utility Transfer Pump 115 RL-614432 RJSE-75SS 3/4 Based on 5' Suction lift, Flow in US GPM SO Designed for the outdoor, PSI 10 20 30 40 50 60 PSI hunting, camping and fishing RJSE-75SS 9.5 9.0 7.3 4.6 2.3 0.4 64 enthusiast, this pump is ideal for pumping out boat bilges and SS Shallow Well Jet Pump stock tanks, water transfer for washing an RV or ATV, and any Ideal for the supply of fresh water other applications where easy portability is required. to rural homes, farms, and cabins Includes a vehicle power adapter with 6' cord for use with that have suction lifts down to 25'. any car, boat, truck, RV or ATV equipped with a 15A (or greater), 12VDC vehicle outlet. • Corrosion-resistant stainless Model Connection Item # List steel pump housing - for years of service and reliability. MPFV12CAMO 3/4\" GHT RL-14942008 • Includes factory pre-set 30/50 pressure switch - produces Red Lion 156 GPH Drill Pump up to 50 psi with automatic shut-off. • Thermoplastic self-priming • Includes cord, carry handle, and garden hose adapter. construction for best pump • 115/230 Volt heavy-duty motor - TEFC design with simple performance and extended service life. connection to existing power source. • Connects to standard drill and Model HP Voltage Item # List garden hose. RJS-75SS 3/4 9.0A @ 115V RL-97080702 4.5A @ 230V Based on 5' Suction lift, Flow in US GPM SO Model Connection Item # List PSI MPDP PSI 30 40 50 60 73 3/4\" GHT RL-14942003 RJS-75SS 12.8 9.1 5.3 2.1 The Water System Experts Ground Water Pumps & Equipment 21

Cloud Modem Device STEPANOTHER Compatible Products DConnect Box FORWARD! For over 40 years, DAB has been a main player in the sector of the technologies for the movement and management of our most precious resource, water. DAB offers technological solutions capable of ensuring reliability and efficiency, and to optimize energy consumption in residential building service, commercial building service, agricultural and irrigation applications. DAB puts people at the centre of every action, strategy and development plan. 22 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

Automatic Booster System w/ Inverter E.sybox mini uses the most advanced DAB technologies to create constant pressure according to the system demands, thus an optimization of energy consumption. Suitable for use with potable water. The new 3-rotor model ensures further noise reduction & energy consumption. Managing the water pressure in your home has never been so simple and quiet. Operating Range Flow rate up to 21 gpm; head up to 180 ft Clean, free from solids or abrasive substances, non viscous, Pumped Liquid non aggressive, non crystallized and not chemically neutral. Liquid Temp Range 0°C to + 35°C for domestic use / 0°C + 40°C for other uses Max Suction Lift 26 ft Item # List DAB-60188927 PSI 13 30 50 70 78 Max Flow Max PSI Voltage GPM 20 16 11 8 4 22 80 115/230 Automatic Booster System w/ Inverter E.sybox is a patented booster system, unique in its category, with high performances, efficient, compact, easy and satisfying in the use both for the installer and the final user. While E.sybox mini is the solution for water boosting in small dwellings, E.sybox offers the same advantages in collective residential applications, such as villas or condos. Wireless technology allows to set up booster sets up to 4 pumps. Operating Range Flow up to 32 gpm; head up to 215 ft. Pumped Liquid Clean, free from solids or abrasive substances, non viscous, non aggressive, non crystallized and not chemically neutral. Liquid Temp Range 0°C to + 35°C for domestic use / 0°C + 40°C for other uses Max Suction Lift 26 ft Max Working Pressure 116 PSI Item # List DAB-60161182 PSI 88 84 75 60 40 15 Max Flow Max PSI Voltage GPM 5 8 13 18 23 28 32 86 230 DAB esydock & Esytwin docking stations E.sydock is used to be able to mount 1 qty E.sybox's. For systems where you want to pipe up the system now and install the pump later or where you want to be able to change the pump easily or remove it for the winter. E.sytwin is used to mount two E.syboxes side by side for systems where either a larger flow or a where stand-by pump is required. • The suction and discharge 1 1/4\" NPT connection can be made at either side of the dock or on the same side to make piping up the dock as easy as possible. • E.syboxes can communicate with each other by means of wireless communications of up to four E.syboxes that can talk to each other to allow for easy set-up and duty rotation. • The pump is mounted in a sound-proof closed ABS housing. • The inverter and Item # List synchronous motor DAB-60150514 provide energy savings E.sydock DAB-60162081 E.sydock E.sytwin with no pressure E.sytwin surges and less stress on pipes & fittings. DAB E.sywall Mounting Kit Esywall is a fitting kit that allows the DAB E.sybox pump to be mounted directly to a wall. Complete wall mounting kit with brackets, screws, dowels, and two spacers for shock absorption. Complete wall mounting kit with Item # List hardware. Suitable for both E.sybox and E.sybox Mini 3. DAB-60161442 The Water System Experts Ground Water Pumps & Equipment 23

7\" MULTISTAGE SUBMERSIBLE PUMP DTron 2 is a 7” submersible electronic multi-impellers pump for clean water designed for use in wells and tanks. It can be used submerged, partially submerged or on the surface (with the appropriate accessory). It is suitable for use in domestic and residential environments for pressurization, rainwater reuse, gardening and irrigation activities. The pump can be installed even horizontally. It is also available in version X with 1” inlet and kit X which includes 3.2 ft (1 meter) suction hose and float to prevent the suction of impurities from the bottom. The entire pump is classified IP 68, with the DOC68 accessory (supplied separately) it becomes an IP 68 surface pump that can be used under the level of the water. On request a certified version for drinking water is available. The expansion vessel is integrated, no external expansion vessel is required. Item # List DAB-60197690 Model HP Hydraulic Data PSI 62 57 50 40 30 17 Max Max Discharge Voltage Flow PSI DTron2 45/90 .8 GPM 2 6 10 14 18 22 32 63 1 1/4\" 110/240 7\" MULTISTAGE SUBMERSIBLE PUMP DTron 3 is a 7\" submersible electronic multi-impeller pump designed for use in wells, cisterns or tanks. It can be used submerged, partially submerged or on the surface, with DOC68 (supplied separately). DTron 3 is suitable for use in residential building service to increase water pressure, reuse of rainwater and to water the garden or irrigate small vegetable gardens. DTron 3 integrates the electronics for automatic switching on and off. The suction height is adjustable from the bottom up to 8 cm. It is possible to connect a float without compromising the watertight of the pump thanks to the NFC (Near Field Communication) pocket. Com Box available soon - it allows to set the cut-in pressure Item # List and to control the alarms, it communicates with the pump through the PLC technology (PowerLine Communication), without other DAB-60195642 connection cables if not the electrical power. Wi-Fi connectivity as standard. Model HP Hydraulic Data PSI 17 30 40 50 57 62 Max Max Discharge Voltage Flow PSI DTron3 45/90 .8 GPM 22 18 14 10 6 2 26 64 1 1/4\" 110/240 7\" MULTISTAGE SUBMERSIBLE PUMP W/ VARIABLE FREQUENCY DRIVE 7” multi-stage electronic pump with variable frequency drive for clean water designed for use in wells, cisterns or tanks. Usable submerged, partially submerged or on the surface (with the appropriate accessory). It is suitable for pressurization, reuse of rainwater and activities gardening and irrigation in domestic and residential environments. The pump can also be installed horizontally. Equipped with PLC (PowerLine Communication) and Wi-Fi technology. If combined with an identical pump two Esydivers can work in twin mode one in place of the other or in support mode when the system requests are higher than what can be supplied by a single pump. Available in version X with 1 “union and kit X which includes the 3.3 ft / 1 meter suction pipe and float to prevent the suction of impurities from the bottom. The entire pump is IP 68 certified. With the DOC68 accessory (supplied separately) it becomes an IP 68 surface pump to be used under the leaf. Certified version for drinking Item # List water available on request. DAB-60197922 Model HP Hydraulic Data PSI 28 37 45 56 65 78 Max Max Discharge Voltage Flow PSI Esybox Diver 1.3 GPM 28 24 22 20 18 14 32 78 1 1/4\" 240 24 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

DAB DCONNECT BOX 2 DConnect is the new DAB cloud service that allows you to remotely control your installations, in real time and HEATING wherever you are. It is possible to control pressurization and water management pumps, and heating or air conditioning circulators. CONDITIONING DConnect Box 2 expands the range of DConnect products. This latest addition is the ideal solution for systems connecting up to 4 products, and is compatible with a wide range of DAB products. It can also be used on already RAIN WATER installed products. All that is required is constant internet access at the place of installation. Using the DConnect App, available on App Store and GARDENING & IRRIGATION Google Play, it is possible to check the settings of compatible products. Taking advantage of the Cloud service, through the website internetofpumps.com or the DConnect App, it is also possible to remotely check the installation and WATER BOOSTING receive alarms in real time, wherever you are, through an extremely clear and functional user interface. WASTE WATER DAB NFC WATER LEVEL MEASUREMENT DAB NFC FLOAT Once connected to the DConnect Detects the level of water in a Box 2, controls the level of water tank, preventing emptying of the in the tank and notifies the user latter and seizing of the pump of the level via an App. (Only for avoiding the dry running, due to DTron 3 and Esybox diver). too low a level of water. Item # List Item # List DAB-60184570 A DAB-60184577 c D DAB DOC68 DAB Floating Suction Kit The DOC68 permits installation Used to collect water at such a of the DTron and Esybox Diver level as to avoid the pumping even outdoors as an IP68 certified of dust and mud found at the surface pump. With this accessory bottom of wells and tanks. and IP68 certification, the DTron This suction kit is suitable for pumps can be installed even out connection to the DOC68. 300 of water and used, therefore, like micron SS fine mesh. real traditional booster pumps. Item # List Item # List DAB-60192276 b WIS-FSF12 A BC D The Water System Experts Ground Water Pumps & Equipment 25

Special Application Pumps Flojet LITTLE GIANT 115 Volt PSI Ports Open Flow Item # List Cord Amps Disch. Item # List 22/35 1/2\" 3.3 US GPM, FLO-04406043A Corrosion Resistant Nylon Housing (Multiple Uses) .4 AMPS @ 10 PSI NK 2UL WG 15’ 1.7 1/4\" MPT LG-527300 12 Volt 45 1/2\" 5.0 US GPM FLO-04300143A Parts Washer Pump 1/2\" MPT Conduit Fitting 1 YS 6’ 1.1 1/4\" MPT LG-501020 Utility PE-2YSA 6' .8 1/4\" MPT LG-518550 Stainless Steel Housing Flow in US GPH @ Total Head in Feet SO 3/4\" Garden Hose Thread In/Out Head 1’ 3’ 5’ 10’ 12.3 170 7.4 NK 2UL WG 325 300 270 12.2 - Cord Amps Volt Item # List 1 YS 205 168 120 130 Pump 6’ 1.6 115V LG-555112 PP 1 Pump 1' 7.0 12V LG-555602 PE-2YSA 300 270 240 PP 12 Condensate Flow in US GPH @ Total Head in Feet 20’ SO 1’ 5’ 10’ 15' 125 Head Designed for in-pan placement, the 125 25.0 1-ABS shallow pan pump offers 555502 360 260 220 170 25.0 next generation technology for air 555602 360 260 220 170 conditioner condensate removal. Totally submersible pump with built- Magnetic Drive in, advanced mechanical switch that automatically triggers operation when condensate is in the For semi-corrosive chemicals and pan or the reservoir reaches a preset level. Automatic shutoff solutions. Features leakproof, occurs when the condensate level drops. seal-less magnetic drives and are designed for in-line, non-submersed VCMX Series is ideal for collecting, use. 6' power cord. detecting, and the automatic removal of condensate from Suction/Disch Item # List air conditioning equipment, Amps FIPT x MIPT LG-580503 dehumidifiers, high efficiency 2 MD SC 1.4 1/2\" x 1/2\" LG-581503 furnaces, condensing boilers, 3 MD SC 2.4 3/4\" x 1/2\" LG-582503 and other equipment where an 4 MD SC 1.7 1\" x 1/2\" LG-583503 automatic drain pump is required. 5 MD SC 2.0 1\" x 1/2\" Cord Amps Disch. Item # List Flow in US GPH @ Total Head in Feet SO 1-ABS 9' 1.1 1/4\" MIPT LG-550521 Head 1’ 3’ 6’ 9’ 15’ 18’ 24’ 14.6 VCMX 20 ULS 6' 1.0 3/8\" Barb LG-554530 - 21.9 2 MD SC 510 465 410 330 - - - 24.3 60 27.5 3 MD SC 750 710 665 660 425 300 Flow in US GPH @ Total Head in Feet SO 265 Head 4 MD SC 850 810 765 710 550 450 1’ 3’ 5’ 10’ 15' 20' 10.0 - 21.0 5 MD SC 1050 990 920 840 655 550 1 ABS 205 180 145 - - 10 12 Volt Demand VCMX 20 ULS 84 80 75 60 42 Flow 1 US GPM, 40 PSI, 3/8\" barbs. Cistern Hand Pump Item # List • Depth rating 30 Feet. • Made of heavy cast iron. BE-90220202 • Black enamel paint finish. • 1 1/4\" FPT inlet. Pail/Drum HAND PUMP List Item # Fits standard drum openings. Cylinder head allows a 360º spigot orientation. Comes with extension PA-HP tubes and will pump any 15, 30 or 55 gallon drum. Item # List Plastic ROTARY Hand Pump PU-BP Superior petroleum / chemical resistance, Yard Hydrant Polypropylene construction, Ryton vanes, teflon seals, 8 GPM, 1\" barbed discharge, 2” barrel adaptor. Description Size Item # List Rotary Item # List 2 foot bury 3/4” VA-YH2 Barrel Pump PU-RP90PT 26 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

TORQUE ARRESTER Pressure Reducing Valve Snug fit in well casings from List The dezincification resistant 4” to 8” I.D. bronze body and dielectric polymer cage provide maximum corrosion Item # resistance. Features a stainless PA-TA48 steel adjusting screw, internal thermal expansion bypass and SS 3/16\" SHACKEL sealed cage for vault installations. Designed for easy in-line servicing Maximum corrosion resistance and durability. with simple cartridge removal. 100% factory tested. Preset at 50 PSI. Item # List Made in USA. PA-SSS Adjustable Size Item # List 25-75 PSI 3/4” VA-PRV07 SUPER-TIE ROPE HANGER 25-75 PSI 1” VA-PRV1 Fits 6” & 6 1/4” Casings. Larger Sizes Available Size Item # List Water Meters 6” PA-STRH6 (Direct Read, US Gallons, 1/4\" POLYESTER DBL BRAID ROPE No Lead) Works well in pulleys & winches. Size Item # List Available 5000’ roll or by the foot. Description Size Item # List Tail Pieces Extra 5/8 x 3/4\" PA-WM06 (1840 lb Test) 1/4” PA-ROPE14 Flow Rating: 1-20 GPM Maximum - 15 GPM Continuous Tail Piece for Meter 5/8\" & 3/4\" PA-WMTP Stainless Steel Wire 1 Cubic Meter of Water = 264.6 US Gallons Used to lower and raise deep well MonoDrive Mounting Bracket submersible pumps. Nominal Breaking Strength 2,400 lbs. Working Load Allows a manifold to be secured Limits will depend on the actual usage to the brackets with\"U\" bolts (NBS/Safety Margin). and a small pressure tank inserted to the manifold. Item # List Stainless Steel Wire 5/32” x 7 x 19 PA-SSW Split Bolts, Wire Clamps 3/16” PA-KS20 Item # List PA-MDB Stainless Steel Wire available in 5000' roll. (2 Brackets in Box) Flow Sleeve Well pumps are designed with the intake to the pump section directly above the motor. Most overheating problems are due to failure to install the well pump per the manufacturer's specifications. Each pump manufacturer will list \"cooling requirements\" specifying a minimum flow requirement of water over the motor to achieve proper cooling. The flow sleeve routes the water over the motor creating the flow needed to cool the pump and insure a properly running pump. Storage tank, cisterns, ponds, water wells, and aeration systems installations are in definite need of a flow sleeve. • Available for a 1, 1 1/4, and 2\" discharge pipe. Pump • Includes discharge cover, motor center, wire grommet and stainless steel hardware. • 4\" SCH40 PVC Required for flow sleeve. Pump Stand & Pump Center Kits Motor Allows horizontal Item # List installations in tanks, PA-FS41 rivers, etc. Simply bolt 4\" Motor x 1\" Pipe PA-FS412 together the assembly 4\" Motor x 11/4\" Pipe PA-FS42 and install 1” PVC pipe PA-FSPS as stabilizers. The 4\" Motor x 2\" Pipe PA-FSCS pump stand kit contains Pump Stand one stand but 2 kits may be required as Pump Center Kit in the above image. The Water System Experts Ground Water Pumps & Equipment 27

Pressure Switches Pressure & Vacuum Gauges This standard duty water pump switch is designed for the control Description PSI Item # List of electrically driven water pumps of all types. Square D Standard Pressure Gauge \"Center Back Mount\" Description Number Preset Item # List 1/8” BM - 2” 100 PA-PG100BM1 2HP, 65 PSI max FSG2 20/40 PA-PS2040 1/4” BM - 2” 100 PA-PG100BM2 2HP, 65 PSI max FSG2 30/50 PA-PS3050 Standard Pressure Gauge \"Lower Mount\" 2HP, 65 PSI max FSG2 40/60 PA-PS4060 1/8” L.M. - 2” 100 PA-PG100LM1 Low PSI Cut Out 1/4” L.M. - 2” 15 PA-PG15 2HP, 65 PSI max FSG2-M4 30/50 PA-PSLOP 1/4” L.M. - 2” 30 PA-PG30 Bronze Tank Tees 1/4” L.M. - 2” 60 PA-PG60 1/4” L.M. - 2” 100 PA-PG100 1/4” L.M. - 2” 200 PA-PG200 Liquid Filled Pressure Gauge \"Center Back Mount\" 1/4” BM - 2” 100 PA-PG100BM2LIQ PA-TT14U PA-TTMANIFOLD Liquid Filled Pressure Gauge \"Lower Mount\" Description Size Ports Item # List 1/4\" L.M. - 2\" 100 PA-PG100LIQ 11” 1” (2) 1/2\", (2) 1/4\" PA-TT11 1/4\" L.M. - 2\" 200 PA-PG200LIQ 11” c/w Union 1” (2) 1/2\", (2) 1/4\" PA-TT11U 14” 1” (2) 1/2\", (2) 1/4\" PA-TT14 Pressure Relief Valve 14” c/w Union 1” (2) 1/2\", (2) 1/4\" PA-TT14U Pressure relief valves are recommended for all cold water system installations to 14” c/w Union 11/4” (2) 3/4\", (2) 1/4\" PA-TT14U12 protect against damage to piping and pressure tanks. Manifold 1\" (3) 3/4\" PA-TTMANIFOLD Pitless Adapters Description Size Item # List Set at 75 PSI 1/2” PA-RV05 A pitless adapter is a two piece, quick Set at 75 PSI 3/4” PA-RV07 connect device that will allow you to connect your well pump to your home Set at 100 PSI 3/4” PA-RV07100 through the well casing. This bronze device should be installed below the Set at 65 PSI (Max 150 PSI) 1/2” PA-RVHD05 frost line and on the side of the well casing where the supply line will run Well Seals from the well. Description Load Size Item # List Description Size Item # List PA-PA1 Cast Iron 6x1 PA-WS61 Bronze 2000lb 1\" Cast Iron 6 x 1 1/4 PA-WS612 Cast Iron 6 x 1 1/4 x 1 PA-WS6121 Bronze 2000lb 1 1/4” PA-PA12 Cast Iron 8 x 1 1/4 x 1 PA-WS81 Bronze 5000lb 2\" PA-PA2 Plastic 4x1 PA-WS41P Plastic 5x1 PA-WS51P Brass Snifter Valve Plastic 6x1 PA-WS61P A Snifter Valve is a one way Well Caps valve used to allow air into a system or tank. Heavy duty aluminum vermin proof well cap that covers an 8\" Description Size Item # List well to keep contaminants from Chrome Plated Brass 1/8” PA-SV1 entering the well from the surface. 1/4” PA-SV2 Flomatic Check Valve Description Size Item # List Watertight-Vermin Proof - Vented 1\" VA-100E Aluminum - Fits 1\" Conduit 6” PA-WCV6LOCK- 1 1/4\" VA-125E BLUE Bronze Fipt x Fipt Alum. - Fits 1 1/4\" Conduit 8\" PA-WCV8 28 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

Bronze Fittings & Brass Nipples - no lead Size Item # List Size Item # List 1/4\" B-50002 Tee 1/4\" B-05002 Plug 1/2\" B-50005 List 3/4\" B-50007 List 1/2\" B-05005 1\" B-50010 1 1/4\" B-50012 3/4\" B-05007 2\" B-50020 1\" B-05010 1 1/4\" B-05012 1 1/2\" B-05015 2\" B-05020 Union 3/4\" B-58007 1\" B-58010 90 Elbow 1/4\" B-08002 1 1/4\" B-58012 1/2\" B-08005 2\" B-58020 3/4\" B-08007 1\" B-08010 Brass 1/4\" x Close B-80005 1 1/4\" B-08012 1 1/2\" B-08015 Nipples 1/4\" x 2\" B-80020 2\" B-08020 1/4\" x 2 1/2\" B-80025 1/4\" x 3\" B-80030 Str. 90 1/4\" B-12002 1/4\" x 4\" B-80040 3/4\" B-12007 1\" B-12010 1/4\" x 6\" B-80060 3/8\" x 2\" B-81020 1/2\" x Close B-82005 45 Elbow 1/4\" B-18002 1/2\" x 1 1/2\" B-82015 1/2\" B-18005 3/4\" B-18007 1/2\" x 2\" B-82020 1\" B-18010 1 1/4\" B-18012 1/2\" x 2 1/2\" B-82025 1 1/2\" B-18015 1/2\" x 6\" B-82060 3/4\" x Close B-83005 3/4\" x 1 1/2\" B-83015 Coupling 1/4\" B-30002 3/4\" x 2\" B-83020 1/2\" B-30005 3/4\" B-30007 3/4\" x 3\" B-83030 1\" B-30010 1 1/4\" B-30012 3/4\" x 5\" B-83050 1 1/2\" B-30015 2\" B-30020 3/4\" x 6\" B-83060 Reducing 3/4\" x 1/2\" B-30101 1\" x Close B-84005 1\" x 3/4\" B-30131 1 1/4\" x 1\" B-30151 1\" x 2\" B-84020 1\" x 3\" B-84030 1\" x 4\" B-84040 1\" x 5\" B-84050 1\" x 6\" B-84060 1 1/4\" x Close B-85005 1 1/4\" x 2\" B-85020 Reducing 1/2\" x 1/4\" B-39072 1 1/4\" x 3\" B-85030 Bushing 3/4\" x 1/4\" B-39098 3/4\" x 1/2\" B-39101 1 1/2\" x Close B-86005 1\" x 1/4\" B-39127 1\" x 3/8\" B-39128 1 1/2\" x 2 1/2\" B-86025 1\" x 1/2\" B-39130 1\" x 3/4\" B-39131 2\" x 2 1/2\" B-87025 1 1/4\" x 1/2\" B-39166 1 1/4\" x 3/4\" B-39167 2\" x 3\" B-87030 1 1/4\" x 1\" B-39168 1 1/2\" x 3/4\" B-39210 Bronze Insert Coupling 1 1/2\" x 1\" B-39211 1 1/2\" x 1 1/4\" B-39212 Size Item # B-39249 1\" B-24010 2\" x 1\" B-39251 B-24012 2\" x 1 1/2\" 1 1/4\" Bronze Male Adapter Cap 1/4\" B-48002 Size Item # 1/2\" B-36005 3/8\" B-48003 3/4\" B-36007 1\" B-36010 1/2\" B-48005 Long 1 1/4\" B-36012 Union 1 1/2\" B-36015 3/4\" B-48007 Reducing 2\" B-36020 Long Reducing 1\" B-36010LONG 1\" B-48010 Increasing 1\" B-36010U Increasing 1\" ins x 11/4\" MPT B-36121 1 1/4\" B-48012 1\" ins x 11/4\" MPT B-36121LONG 1\" ins x 3/4\" MPT B-36131 1 1/2\" B-48015 1 1/4\" ins x 1\" MPT B-36132 2\" B-48020 The Water System Experts Ground Water Pumps & Equipment 29

Hose Bibb with 1/4 Turn Handle Flomatic Flo-Trol Automatic Flow Control Valve Description Size Item # List Stainless Steel 1/2\" VA-BDS05 Stainless Steel 3/4” VA-BDS07 Description GPM Item # List 3/4\" F x 3/4\" F 10 VA-CDY10 S.S. Pressure Relief Valve Stainless Steel Pitless Adapters Description Size Item # List Size Load Item # List 1\" 6000 lb PA-PA1SS Set at 100 PSI 3/4 PA-RV07100SS 6000 lb PA-PA12SS 1 1/4\" 6000 lb PA-PA2SS Stainless Steel Pressure 2\" Gauges Stainless Spring Check Valve Description PSI Item # List Liquid Filled Pressure Gauge \"Center Back Mount\" FIPT 1/2” VA-SSCV05 Stainless Steel 100 PA-PG100CBMSS 3/4” VA-SSCV07 Liquid Filled Pressure Gauge \"Lower Mount\" S.S. Manifold Stainless Steel 100 PA-PG100LIQSS Flomatic Stainless Check Valves Size Item # List 1\" VA-100SS VA-XLCH1 Size Ports Item # List 1\" Extra Long VA-125SS PA-TTMANISS 1 1/4\" VA-150SS 1\" (2) 1\", (1) 1/4\", (2) 3/4 1 1/2\" VA-200SS PA-TT14USS 2\" VA-125100SS S.S. Tank Tees PA-TT13USS 1\" x 14\" (2) 3/4\", (2) 1/4\" 1\" x 13\" (2) 3/4\", (2) 1/4\" Stainless Steel Fittings & Nipples - no lead Size Item # List Size Item # List Tee 1/2\" S-05005 Plug 1/4\" S-50002 Nipples 1/2\" S-50005 3/4\" S-05007 3/4\" S-50007 1\" S-50010 1\" S-05010 90 Elbow 1/2\" S-08005 3/4\" S-08007 1\" S-08010 1/4\" x Close S-80005 1/4\" x 2\" S-80020 Coupling 1/2\" S-30005 1/4\" x 4\" S-80040 3/4\" S-30007 S-83005 1\" S-30010 3/4\" x Close S-83020 3/4\" x 2\" S-83040 Reducing 1/2\" x 1/4\" S-39072 3/4\" x 4\" S-83060 Bushing 3/4\" x 1/4\" S-39098 3/4\" x 6\" S-84005 3/4\" x 1/2\" S-39101 1\" x Close S-84020 1\" x 1/4\" S-39127 1\" x 2\" S-84030 1\" x 1/2\" S-39130 1\" x 3\" S-84040 1\" x 3/4\" S-39131 1\" x 4\" S-84060 1 1/4\" x 1\" B-39168 1\" x 6\" Teflon Tape for Grey Stainless Steel PTFE 1/2\" x 260\" PA-SSTT 30 Ground Water Pumps & Equipment vanislewater.com 1-888-444-8497

Deep-Set Sch 120 Submersible Pump Wire, Flat Threaded PVC Drop Pipe Please Call for Full Roll (984 ft) Pricing ASTM D1785 - Item # List Type 1 Grade 1 12/4 per ft WI-RAIN124 10/4 per ft WI-RAIN104 NSF STD 61 and 8-4 per ft WI-RAIN84 NSF STD 14 Splicing Kits & Tape Potable Water 304 SS Coupling Tapered Black Heat Shrink Kits Item # List Ream & Drift Thread Threads Deep Set PVC SCH 120 is a specially constructed heavy duty 14-10ga ( 4 Tubes) Heavy Wall PA-SPL pipe for well pump installations. The substantially increased wall thickness helps maintain pipe strength lost as threads are 8ga ( 3 Tubes ) PA-SPL8 cut. In contrast, when SCH 80 pipe is threaded, approximately 1/2 the pipe thickness is cut away. The increase in strength 6ga ( 3 Tubes ) PA-SPL6 of SCH 120 is much greater than the percentage increase in wall thickness. The tapered threads are designed to maximize Clear Heat Shrink Kits strength when reamed and drifted 304 S.S. couplings are used with full thread engagement. 14-10ga ( 4 Tubes) Heavy Wall PA-SPLCL Splicing Tapes PVC Electr. Tape 3/4” x 60’ PA-TAPE Sch 120 Threaded PVC Drop Pipe Wire Size Chart, in Feet, Approx. Single Phase, Awg Cable, Copper Conductors Max Ft. Per Nom. Piece List 230V 12 10 8 6 4 Size Setting Max. Crate/ Item # 20 ft. 1/2HP 641 1003 1575 2450 3750 Depth ft. HP # Pieces Length 1\" 3/4HP 473 740 1161 1810 2760 1.25\" 750 1.5 2600/130 PVC-DS1 1HP 392 617 968 1507 2300 1 1/2HP 326 510 801 1248 1920 590 2.0 2000/100 PVC-DS12 2HP 250 390 620 970 1530 Please Note: Price for 1\" & 1.25\" Deep Set 3HP 190 300 470 750 1190 Does Not Include SS Couplings 5HP 110 180 280 450 710 • Approximate setting depths are based on typical 115V operating parameters. Type of coupling used, pumping water level, flow rate, tank pressure, 1/3HP 212 333 522 810 1240 etc., may affect this value. 1/2HP 159 249 390 608 930 Three Phase 230 Volt - Copper Wire Schedule 120 Dimensions (in inches) 230V 12 10' 8 6 4 2 1 1/2HP 670 1060 1670 2610 4050 6160 Nom. Pipe Average Min. Nom. Max 510 810 1280 2010 3130 4770 Size (in) PSI 2HP 390 620 990 1540 2400 3660 1” O.D. I.D. Wall Wt./Ft. 720 3HP 230 370 590 920 1430 2190 1 1/4” 5HP 260 420 650 1020 1560 1 1/2” 1.315 .891 0.200 0.445 600 7 1/2HP 310 490 760 1170 2” 10HP 330 520 800 1.660 1.204 0.215 0.619 540 15HP 400 610 20HP 500 1.900 1.423 0.225 0.750 480 25HP 410 30HP 2.375 1.845 0.250 1.054 Stainless Steel R&D Coupling For 208 volt 3 phase, multiply 230 volt number Item # List by 0.75 or consult Franklin AIM Manual. S-30010RD 1\" Ream & Drift Thread S-30012RD \"Use a multiplier of .6 for Canadain Electrical Code.\" 1.25\" Ream & Drift Thread SEE PAGE 7 FOR MONO/SUBDRIVE PUMP CABLE Check Valve For Deep Set PVC MAXIMUM ALLOWABLE LENGTH Item # List Municipal Service Poly Tubing VA-XLCH1 (extra long) 1\" CSA, Max. 200 PSI (Sold In Full Lengths Only) 1 1/4\" VA-125SS Size Length OD Item # List 3/4” 100’ 0.875 PO-M07100 Submersible Drop Poly 160 PSI 1” 200’ 1.125 PO-M07200 (Sold In Full Lengths Only) 100’ PO-M10100 1 1/4” 200' 1.375 PO-M10200 Size Length ID Item # List 300’ PO-M10300 500’ PO-M10500 100’ PO-D10100 100’ PO-M12100 200’ PO-M12200 1” 200’ 1.049 PO-D10200 300' PO-M12300 300’ PO-D10300 500' PO-M12500 500’ PO-D10500 Blue 1\" 100' PO-D10100B 300' PO-D10300B The Water System Experts Ground Water Pumps & Equipment 31

UV Dynamics is a Canadian company that designs and manufactures Ultraviolet (UV) water disinfection systems. UV Dynamics continues to invest in production automation equipment enabling them to produce quality products in North America, at competitive prices. All UV Dynamics power sources incorporate both visual and audible lamp failure alarms, an annual lamp change reminder timer, and a proprietary True Lamp Current detection feature. This feature ensures that the lamp alarm will always work properly regardless of the AC line voltage level. Products without true lamp current detection are prone to giving false indications that the lamp is on when in actuality it is not. Mini Rack Whole Home UV Disinfection Systems A customizable, whole home water treatment system. Combines one or two filter sump housings and a UV disinfection system into one simple, clean, integrated product line. • Connection 3/4\" FIPT inlet x 3/4\" MIPT outlet. • Comes fully assembled. • Filter/s not included. c/w Big Blue 4 1/2\" Filter Housings GPM Filters Item # List 6 1 x 10\" UVD-MR180TP1100 8 1 x 10' UVD-MR245TP1100 10 1 x 10\" UVD-MR320ETP1100 10 2 x 10\" UVD-MR320ETP2110 c/w Standard 2 1/2\" Filter Housings 10 1 x 20\" UVD-MR320ETP1200 GPM Filters Item # List 10 2 x 20\" UVD-MR320ETP2220 8 1 x 20\" UVD-MR245TP1S20 13 2 x 20\" UVD-MR400ETP2220 10 2 x 20\" UVD-MR245TP2S20 Standard Series 1\" Solenoid Valve Kit UV Dynamics • Annual lamp life change timer. • Lamp life remaining feature. Solenoid valve kit includes a valve, remote solenoid • No tools required for regular servicing. interface and power cord. • Remote solenoid interface provides stable GPM Connection Length Item # List power supply to solenoid as well as an override 6 3/4” MIPT 14.5\" UVD-180 option during alarm conditions. 8 3/4” MIPT 18\" UVD-245 10 3/4” MIPT 18\" UVD-320E • 1” solenoid shut off valve will close during power 13 3/4” MIPT 22\" UVD-400E outages, lamp outages, and low UV level conditions. 20 1” MIPT 37\" UVD-600 40 1” MIPT 50.5\" UVD-1200 • Must be used together (does not work separately). 50 1” MIPT 50.5\" UVD-1500 Item # List Solenoid Valve & Remote 1\" UVD-P400455 Interface Kit We recommend using a surge protector (UVD-P400467) on all U.V. installations to protect the life of the ballast. 32 Water Treatment & Filters vanislewater.com 1-888-444-8497

Lamps Quartz Sleeves • Includes O-Rings. • Includes O-Rings. Length Models Item # List Length Models Item # List 13.75 180, 245 UVD-QS400435 13.0 180, 245 UVD-RL400434 17.0 240, 320, 320E UVD-QS400151 16.25 240, 320, 320E UVD-RL400152 21.0 400, 400E UVD-QS400129 20.0 400, 400E UVD-RL400128 23.0 485, NSF 8.40C UVD-QS400273 22.25 485, NSF 8.40C UVD-RL400269 31.25 NSF 11.40C UVD-QS400274 28.0 NSF 11.40C UVD-RL400270 38.5 NSF 14.40C UVD-QS400323 35.0 600, 800, 1000, NSF 14.40C UVD-RL400158 35.0 600, 800, 1000 UVD-QS400157 49.0 1200, 1500, NSF 20.40C UVD-QS400275 46.0 1200, 1500, NSF 20.40C UVD-RL400271 Power Supply 120V 1\" Solenoid Valve Kit UV Dynamics The MF series UV power sources are used with all Solenoid valve kit includes a single lamp UV Dynamics valve, remote solenoid interface water disinfection products. and power cord. The MF series is one of the • Remote solenoid interface provides stable most advanced UV power power supply to solenoid as well as an override sources available anywhere. option during alarm conditions. Microprocessor control with programmed lamp start • 1” solenoid shut off valve will close during power insures adequate lamp pre-heating and predictable outages, lamp outages, and low UV level conditions. ignition voltages resulting in maximum lamp life and • Must be used together (does not work separately). reliable lamp ignition at all ambient temperatures. Lamp current is constantly controlled regardless of the Item # List AC line voltage variations. Solenoid Valve & Remote 1\" UVD-P400455 Models Item # List Interface Kit 1\" UVD-P400454 Standard Series Solenoid Valve Only 1\" UVD-P400429 Remote Interface Only 240 MF-SLC120 UVD-P400201 180, 245, 320E MF-SLE120 UVD-P400235 320 MF-SL120 UVD-P400203 Mini Rack Filter Housings 400E MF-LLE120 UVD-P400255 10\" x 2 1/2\" x 3/4\" FIPT w/ PR Button. 400, 600 MF-LL120 UVD-P400156 800, 1000, MF-LLG120 UVD-P400233 Item # List 1200, 1500 UVD-FH10 800/S, 1000/S, MF-LLG120/S- UVD-P400357 Mini Rack Filter Housing Big Blue 1200/S, 1500/S NC 10\" x 4 1/2\" x 3/4\" FIPT w/ PR Button. Certified Series UVD-FHBB10 Mini Rack Filter Housing Big Blue 8.40C, 11.40C MF-LL120/S UVD-P400206 20\" x 4 1/2\" x 3/4\" FIPT w/PR Button. 20.40C MF-LLG120/S UVD-P400250 We recommend using a surge UVD-FHBB20 protector on all U.V. installations to All UV Systems should be protect the life of the ballast. pre-filtered down to 5 Micron. Misc Parts Mini Rack Brackets Item # List UVD TP1 Filter Housing Mini Rack Bracket (Single Big Blue Filter). Gland Nut All Standard Models UVD-P400103 Item # List UVD-P400620 Lamp Spring All Standard Models UVD-P400111 Metal Bracket All Standard & UVD-P400163 UVD TP2 Filter Housing Mini Rack Bracket Mounting Set Certified Models (Double Big Blue Filter). UV Sensor Probe UVD-P400195 UVD-P400621 The Water System Experts Water Treatment & Filters 33

RUGGED & DURABLE UV DISINFECTION SYSTEMS UV technology is proven to control microbiological (bacteria & virus) issues in water including E.coli, Cryptosporidium and Giardia lamblia. Intended for easy, do-it-yourself installation, a LTW-4 system can be installed on the home’s main water line at the point-of-entry, treating all the water coming into the home. Designed to effectively treat flow rates from 8-15 gpm, the axial flow and rack systems offer the quality, flexibility, and convenience that you require for all of your residential and light commercial applications. Features: • 10 and 15 gpm axial flow system, 8 and 15 gpm rack system with single 10” and 20” sump. • 304 SS LPHO-based system (LPSO on LTW-C4R1). • Integral lamp life monitor, with audible and visual indication of lamp life. • Reliable, industry proven, proprietary low pressure coated UV lamps with ceramic bases for durability and long life (10,000 hours on HO systems, 9,000 hours on SO systems). • Constant current electronic controller in a splash proof case, fully potted ballast virtually eliminates common water damage issue. • 110-230V/50-60Hz. GPM Connection Filters Axial Flow System Item # List 10 1\" MNPT No 10 gpm LP-HO system, audible/visual lamp-out, 10,000 hr lamp life - 420 days LTW-C4101 15 1\" MNPT No 15 gpm LP-HO system, audible/visual lamp-out, 10,000 hr lamp life - 420 days LTW-C4151 Contractor Series Rack System 8 1\" MNPT 1 x 10\" 8 gpm 1-sump LP system, single 10\" sediment, audible/visual lamp-out, 9,000 LTW-C4R1NC hr lamp life - 375 days 15 1\" MNPT 1 x 20\" 8 gpm 1-sump LP-HO system, single 20\" sediment, audible/visual lamp-out, LTW-C4R2NC 10,000 hr lamp life - 420 days CONVENIENT ALL-IN-ONE UV/FILTER SYSTEMS Rack-mount UV/filtration systems offer the convenience of an all-in-one package making installation a simple “in & out” connection. The plug and play platform has the most advanced residential controller on the market with a colour screen user interface giving a multitude of screens displaying diagnostics, status, warnings and even QR codes for a link back to the website. Designed to effectively treat flow rates of 8 & 15 Systems feature gpm, rack-mount UV’s provide the required 5 micron one-piece, 2-sump pretreatment with the option of a full-flow, carbon filter filter heads for a to treat taste and odour. Installation of a UV system leak-free design. has never been easier with an innovative design that (On 2-sump units only) allows for feedwater to enter the filters from either the right or left side of the unit. Combine this with the capability to fully customize the Rack Mount UV Systems colour screens with your own dealer information, or different language, and you can easily see how this GPM Filters Description Item # List integrated UV/filter system shines above all others. Sample screens: 8 1 x 10\" LP-based LTW-LB5Z1NC 8 1 x 20\" system, colour LTW-LB5Z2NC screen, lamp 8 1 x 10\" & 1 x 20\" countdown, LTW-LB5Z12NC 15 1 x 20\" audible, 1\" LTW-LBH5Z2NC 15 1 x 10\" & 1 x 20\" MNPT ports, LTW-LBH5Z12NC 110V, 50-60Hz LTW-LBH5Z22NC 15 2 x 20\" 34 Water Treatment & Filters vanislewater.com 1-888-444-8497

CONDITIONS FOR USE Your system will provide years of use provided the system is maintained on a regular basis as per the specifications outlined in the Owner’s Manual. For the system to perform as tested, the following water quality parameters must be met. Parameter Level Hardness < 120 mg/L (7 gpg) Iron (Fe) < 0.3 mg/L (ppm) < 0.05 mg/L (ppm) Manganese (Mn) < 0.1 mg/L (ppm) Tannins Turbidity < 1 NTU > 75% UVT Transmittance For levels outside those specified in the table above, please contact the factory for further technical assistance. Manufacturer's Warranty Lightwave Replacement Lamps Reactors - 10 year Limited Warranty Electronics - 3 year Limited Warranty UV Lamps - 1 year Limited Warranty Quartz Sleeves - 1 year Limited Warranty Length Models Item # List Guaranteed OEM Lamp Replacement 12.0\" For LB4-031, LB5-031, LB6-031 LTW-RL290 with Lightlock technology (305 mm) series Tired of losing that lucrative For all rack-mount standard-output LTW-RL420 replacement lamp sale to a systems cut-rate online marketer or to an inferior offshore manufacturer? 19.1\" For LB4-061, LB5-061, LB6-061 LTW-RL470 Protect your replacement lamp (486 mm) series revenue stream with Lightwave's truly proprietary UV lamps with Lightlock technology. Maintain your 32.9\" For LB4-101, LB5-101, LB6-101 LTW-RL820 lamp sales and more importantly your lamp margin (836 mm) series all while protecting the integrity of the product and its performance. 34.1\" For LB4-201, LB5-201, LB6-201 LTW-RL850 (836 mm) series OPTIONAL EXPANSION MODULES For LBH4-151, LBH5-151, LTW-RL420HO LBH6-151 series 41.3\" For LB4-401-HW/2, LB5-401- LTW-RL950HW (1050 mm) HW/2, LB6-401-HW/2 UV Concierge Lightwave QUARTZ SLEEVES Available for WEB, iOS, and Android platforms providing live, (SOLD IN SINGLES - INDIVIDUALLY PACKAGED) dynamic feedback on all features and functions of your UV system. Models Item # List Water Quality Monitor For LB4-031/2, LB5-031/2 (20 x 22.5 x 336 LTW-RQ290 Allows for remote monitoring of mm, domed) LTW-RQ420 all major and minor alarms that For LBH4-151, LBH5-151, LBH6-151 (20 x LTW-RQ470 take place on the main UV 22.5 x466 mm, domed) LTW-RQ820 system. Three LED’s visually For LB4-061/2, LB5-061/2, LB6-061/02 (20 x LTW-RQ850 display system functionality 22.5 x 516 mm, domed) LTW-RQ950 from up to 150’ away. For LB4-101/2, LB5-101/2, LB6-101/2 (20 x Custom Dealer Programmer 22.5 x 866 mm, domed) LTW-RSB25 Customize your UV controller For LB4-201, LB5-201, LB6-201 (20 x 22.5 x with your company name, logo, 900 mm, domed) website, QR code and contact For LBH4-401, LBH5-401, LBH6-401 (20 x info. Capture the lucrative 22.5 x 996 mm, domed) replacement lamp market by For all Lightwave 6.1 residential creating a direct link back to products w/ 2.5\" diameter chamber your own website! (LB6-02, LB6-03, LB6-06, LB6-10, LB6-15 series) Fits 5.1 chambers The Water System Experts Water Treatment & Filters 35

UV LED water treatment systems Incorporate integrated, real-time This fully integrated LED based UV I/O monitoring for: disinfection system is available with either the simple multi-state status indicator (GUV4S), Temperature or the full colour screen interface (GUV5S & • Prevents overheating of LED’s includes IEP port for expansion modules). • Alarm alerts of over temperature conditions Packaged with a 12 volt power supply with no LED Status need for a lamp change, as in traditional UV • Always know when UVC LED is on or off systems. The system only turns “on” when • Alarm is signaled in event that the UVC needed based on an integral flow switch, and LED fails last for 5,000 hours of “on” mode operation. UV Output - coming soon • Allows user to know UV output the Model Item # List system is delivering GUV-5S w/ multi-state status LED LTW-GUV4S • Alarms for low UV “dose” GUV-5S w/ full colour screen interface LTW-GUV5S FLOWMETER MODULE • Uses the latest in ultrasonic technology to measure water flow. • Sensors communicate using ultra-sonic sound that travels through the Flowmeter pipe. • Accurately and reliably measures flow without any mechanical wear or fatigue. • Allows the UV system to enter Energy Saver Mode by dimming the UV lamp when no water is being used after a period of time. • Reduces energy costs associated with running the UV Model Item # List system, and prevent over heating of standing water in LTW-LFM10 the UV chamber. Module w/ 1\" MNPT connections LTW-LFM15 Module w/ 1.5\" MNPT connections SOLENOID CONNECTION MODULE • Allows for a solenoid connection on Lightwave (5.1 and 6.1 only) products (will work on lamp failure only on Lightwave 5.1 systems). • Customer simply needs to purchase a normally closed line voltage solenoid valve and affix the module's supplied bare lead cord to the solenoid valve. • Connect power cable to electrical outlet and the other lead to the Item # List \"future-proof\" expandability port on the controller. LTW-SOL1 4-20mA CONNECTION MODULE Item # List MOD-420 • Allows for a 4-20A connection on Lightwave (5.1 and 6.1 only) products. • This device will allow for a 4-20A signal transfer of the UV output to a remote device such as a data logger or computer. • Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system). • No wire is supplied with this system, however 16-22 AWG is required. REMOTE ALARM MODULE Item # List MOD-RAM • Allows for a remote connection on Lightwave (5.1 and 6.1 only) products. • Allows remote installation of alarms, lights, PLC input, data logger, flow control, etc. • Simply plug the supplied into the IEP expandability port on the UV sensor module (or daisy chain to any other module used in the system. • Supplied with three screw terminals (NO, NC & common) to connect to the receiving end of the dry contacts. • As the distance required is unknown, no wire is supplied with the system, however 16-22 AWG is required 36 Water Treatment & Filters vanislewater.com 1-888-444-8497

Ultraviolet Parts Lamps Lamp Base (4 Pin, Stepped) Length Models Item # List Lamp 9.50\" MAX B, B4 TRO-602804 15.75\" MAX C/D, C4-D4 TRO-602805 Length Models Item # List 25.25\" MAX E, E4, PRO7 TRO-602806 39.75\" MAX F, F4, PRO15 TRO-602807 9\" SQ, SC1 STE-S212RL 11.89\" S1Q-PA, SC-2.5 STE-S287RL 13.5\" S2Q-PA, SC4 STE-S330RL Length Models Item # List 18.86\" S5Q-PA STE-S463RL TRO-602854 MAX G PLUS, PRO 10 TRO-602855 32.52\" S8Q-PA STE-S810RL TRO-602856 MAX H PLUS, PRO 20 33.74\" S12Q, S24Q S40Q (+ gold) STE-S36RL 37.0\" MAX J PLUS, PRO 30 Quartz Sleeves Lamp Models Item # List Length SPV-3, SP200-HO, STE-S200RLHO Domed One End 11.81\" SC-200, SCM-2000 SPV-6, SP320-HO, STE-S320RLHO Models Item # List 16.54\" SC-230, SCM-320 STE-S410RLHO 20.08\" SPV-8, SP410-HO STE-S600RLHO B, B4 TRO-602731 27.56\" SPV-12, SP600-HO, SC-600, SCM-600 STE-S740RLHO C, C+, C4, C4+, D, D+, D4, D4+ TRO-602732 33.07\" SPV-15, SP740-HO, STE-S950RLHO 41.34\" SC-740, SCM-740 E, E+, E4, E4+ TRO-602733 SPV-20, SP950-HO F, F+, F4, F4+ TRO-602734 Open Both Ends H, H+, Pro20 TRO-602975 J, J+, Pro30 TRO-602976 Power Supply 120V Quartz Sleeves Open Both Ends Models Item # List Length Models Item # List Current Systems 10\" SQ-PA, VT1 STE-QS212 UV MAX D4 TRO-650713007 14.8\" S2Q-PA, VT4, SSM-17 STE-QS330 For use in Systems (from 1994 to 2008) 20\" S5Q-PA, SSM-24 STE-QS463 UV MAX C TRO-650716006 33.3\" SQ8-PA, SSM-37 STE-QS810 Misc. Parts S12Q, S24Q, S40Q, 35\" SSM-39, SUV & SHF- STE-QS012 Models Sleeve Bolt ALL UV MAX 140 Item # List Closed (Domed) at one end TRO-602665 SPV-200, SP200-HO, STE-QS200 13.1\" SPV-3.5, SC-200, SCM-200 Power Supply 120V 17.8\" SC-320, SCM-320, STE-QS320 SP320-HO SC-410, SCM-410, STE-QS410 21.3\" SPV-410, SP410-HO, SPV-8 Models Item # List SC-600, SCM-600, STE-QS600 STE-BAICE3F 28.8\" SPV-600, SP600-HO, Ice (260022) S 2-12 Q STE-BAICES SPV-12 Controller (Replaces SQ & QPA STE-BAICEC 34.3\" SC-740, SCM-740, STE-QS740 STE-BAICECM SPV-740, SP740-HO, ICE 1F & 2F) STE-260010 SPV-15 Controller (Cobalt Basic) SC200 - 740 Controller (Cobalt Plus) SCM200 - 740 42.6\" SPV-950, SP950-HO, STE-QS950 SPV-20 Power Cord ICE Ballast The Water System Experts Water Treatment & Filters 37

Water Treatment Systems Water Softeners Water softening systems are designed to remove calcium and magnesium ions from incoming water and replace them with soft sodium ions. Our complete system series are made by industry leaders Clack and are designed for simple operation and efficient regeneration. Features and Benefits: • Fully automatic regeneration. • Includes brine safety valve which provides extra overflow protection. • Plastic salt grid prevents salt bridging. • 10 Year Warranty on NSF Certified fiberglass tanks; 1 year on valve. Clack WS1 Valve Metered Softeners Resin Capacity Capacity Backwash Mineral Item # List 10lbs 6lbs Tank 1 cu/ft 1.5 cu/ft 24,000 20,000 2.2 10 x 47 CLK-KWS1M 2 cu/ft 36,000 30,000 2.0 10 x 54 CLK-KWS15M 48,000 40,000 3.2 12 x 52 CLK-KWS2M Clack Bypass Assembly & 1\" PVC Male Elbow Tubing Kit Included Eco Mix Filters ECO MIX is a mixture of five specially prepared components that separate into five separate layers. ECO MIX media is designed specifically for the treatment of high levels of hardness, iron, manganese and tannins/organics. Eco Mix can treat much higher levels of iron and manganese than traditional ion-exchange media used for water softening without the risk of fouling while at the same time removing organics that interfere with disinfection (UV) and discolor the water. Features and Benefits: • Lightweight, easy to backwash at low • More cost effective than individual flow rates. treatment options for each contaminant. • See our website for more technical info. • WQA validated to ANSI-NSF Standards • Uses less salt than a Water Softener. 44, 61, and 372. Clack WS1 Valve Media Service Flow Rate Mineral Item # List 4 Peak Backwash Tank 1 Bag 5.7 4 2.6 CLK-ECOMIX1 1.5 Bags 8 5.7 2.7 10\" x 47\" CLK-ECOMIX15 2 Bags 11 8 4.2 10\" x 54\" CLK-ECOMIX2 3 Bags 11 6.5 12\" x 52\" CLK-ECOMIX3 14\" x 65\" See Page 41 for valve descriptions and specifications. 38 Water Treatment & Filters vanislewater.com 1-888-444-8497

Carbon Filters Automatic backwashing Carbon Filters will provide cleaner, better tasting water with less chlorine, taste, odor and contaminants that are found in many water supplies. Features and Benefits: • Fully automatic backwash control valve. • Saves cost of cartridge replacements. • Uses high quality carbon to remove chlorine. • Additional sizes and options available. Clack WS1 Valve Media Flow Rate Mineral Item # List 1 cu/ft Service Peak Backwash Tank 1.5 cu/ft 2 cu/ft 3 6 5.3 10 x 47 CLK-KCF1 4 7 5.3 10 x 54 CLK-KCF15 5 8 7.5 12 X 52 CLK-KCF2 Clack Bypass Assembly & 1\" PVC Male Elbow Tubing Kit Included Catalytic Carbon Filters Catalytic Carbon is specifically designed for the removal of Hydrogen Sulfide in water. Hydrogen sulfide gives off the characteristic \"rotten egg\" sulfurous odor. A backwashing schedule is programmed into the fully automatic valve. No chemicals are needed for regeneration. Features and Benefits: • Fully automatic backwash control valve. • Uses high quality Centaur Carbon. • Chemical free operation. Clack WS1 Valve Media Flow Rate Mineral Item # List 1 cu/ft Service Peak Backwash Tank 1.5 cu/ft 3 6 5.3 10 x 54 CLK-KCC1 4 8 7.5 12 x 52 CLK-KCC15 All H2S Units Remove 5 ppm Clack Bypass Assembly & 1\" PVC Male Elbow Tubing Kit Included Nextsand Turbidity/Sediment Filters For silt and sediment removal to 3 to 5 microns. Nextsand is a rare natural mineral that is highly processed and graded. Its unique properties make it a perfect media for virtually every sediment filtration application in the water treatment industry. Features and Benefits: • Fully automatic backwash control valve. • Additional sizes and options available. • Saves cost of cartridge replacements. Clack WS1 Valve Media Flow Rate Mineral Item # List 1 cu/ft Service Peak Backwash Tank 1.5 cu/ft 2 cu/ft 4 6 7.5 10 x 47 CLK-KS1 5 8 7.5 10 X 54 CLK-KS15 7 10 10 12 X 52 CLK-KS2 Clack Bypass Assembly & 1\" PVC Male Elbow Tubing Kit Included See Page 41 for valve descriptions and specifications The Water System Experts Water Treatment & Filters 39

Neutralizing Filters Neutralizing filters raise the pH of acidic water to neutralize corrosiveness, protecting fixtures, pipes and appliances. Features and Benefits: • Fully automatic backwash control valve. • Will not over correct pH. • Uses Calcite (crushed) marble. • Additional sizes and options available. We recommend AC-5 test strips to monitor pH after install. Clack WS1 Valve Media Service Flow Rate Backwash Mineral Item # List 3 Peak 5.3 Tank 1 cu/ft 6 CLK-KN1 1.5 cu/ft 4 5.3 10 x 47 CLK-KN15 10 10 X 54 Clack Bypass Assembly & 1\" PVC Male Elbow Tubing Kit Included Tannin Removal Filter Tannins (humic acid) are found in waters which have passed through large quantities of decaying vegetation. Tannins can cause yellow water and yellow staining on fabrics and fixtures. If your well water has multiple problems such as a combination of tannins, hard water, iron, manganese, and sulfur odor, please contact us for technical assistance. Features and Benefits: • Fully automatic backwash control valve. • Additional sizes available. Clack WS1 Valve Media Service Flow Rate Backwash Mineral Item # List 3-5 Peak 2.2 Tank 1.5 cu/ft 6 CLK-KTR15 2 cu/ft 6-8 3.2 10 x 54 CLK-KTR2 9 12 X 52 Clack Bypass Assembly & 1\" PVC Male Elbow Tubing Kit Included Note: Tannin removal filters are available with a mixed bed option. Katalox Light Filter Media w/ Clack Metered Control Valve Katalox Light is a new brand of revolutionary advanced filtration media. It‘s composition makes it outstanding against the contemporary filter media available in water treatment industries, like sand, BIRM, Greensand Plus, Manganese Greensand etc. Engineered with unique MnO2 coating technique on ZEOSORB®, providing it light weight, higher filtration surface, more service life and more reliable performance (filtration down to 3 μm). Can be used in numerous system for residential, commercial, industrial and municipal applications worldwide, for High level filtration, color and odor removal, Iron, Manganese, Hydrogen sulfide removal, efficient reduction of Arsenic, Zinc, Copper, Lead, Radium, Uranium and other radionuclides and heavy metals. Features and Benefits: • High content MnO2 coating (10%). • Light Weight - providing significant savings on backwash water. • Very High Surface Area. • Filtration of sand, sediment and suspended solids, down to 3 micron. • Contains NO Crystalline Silica. • High efficiency removal capacity of Iron, Manganese and Hydrogen sulfide. • Higher Filtration rates. • Very High Surface Area. • Media replacement every 7 - 10 • Effective reduction of Arsenic, Zinc, Copper, Lead, Radium, Uranium, years. radionuclides and other heavy metals. • No disinfection by-product. • No mandatory KMnO4, chlorine Clack WS1 Valve or chlorine dioxide dosing. Media Flow Rate Mineral Item # List • Low operational costs. • Unique product, unmatched by Service Peak Backwash Tank our competitors. 1 cu/ft 3 4 7.5 10 x 54 CLK-KATALOX1 1.5 cu/ft 4 5 8.5 12 X 52 CLK-KATALOX1.5 2 cu/ft 4.5 5.28 10.5 13 X 54 CLK-KATALOX2 40 Water Treatment & Filters vanislewater.com 1-888-444-8497

Clack WS-1 Metered Control Valve Timer Accessories • 8 hr. battery back-up. Motorized Alternating Valve • Microswitches available. • Front panel display with totalizer. Clack motorized alternating List • Double backwash feature. valve is designed to allow • Adjustable 6-cycle controls two meter controlled valves (volumetric) to work together (time clock or meter control). in an alternating mode • Four modes of operation: meter immediate, meter configuration. Connections Item # delayed, time clock, or pressure differential. • Treated water regenerant refill. 1\" FIPT x FIPT CLK-V3069FF • Twin alternating option. Bypass Assembly *For Softener, Greensand Filter, Designed to connect to Clack Water & Catalytic Carbon Units Conditioners. Also connects to fittings Item # List CLK-V1EADME from many other manufacturers. Item # List CLK-V3006 Clack Ws-1 Timer Control Valve Shark Bite Kit For Filters (Backwash Only) With Sharkbite connectors, you simply • 8 hr. battery back-up. push-in-and-lock a 3/4\" Copper, PEX or • Microswitches available. CPVC pipe. No sweating, glue or solvents. • Front panel display with totalizer. Item # List • Double backwash feature. CLK-V300712 • Solar powered option. 1\" PVC Male Tubing Kit • Backwash valve only. Carbon / Media Filters Plastic Male NPT Assembly is Item # List designed to connect to either the CLK-V1EEBTZ Valve or the By-Pass for Clack Water Conditioners. Also connects to fittings from many other manufacturers. In & Out Head w/ Manual Backwash Item # List CLK-V300704 Manual Filter Valve offers a simple to use manually controlled adjustable 3 cycle control for ease of operation. Fiberglass Tank & Base • 2 1/2\" base. Item # List • 1\" inlet, outlet & drain. 10” x 47” FL-1047 • Upper basket included. 10” x 54” FL-1054 12” x 52” FL-1252 • Tank Diameters: 6” – 12”. Tank & Base Item # List 13\" X 54\" FL-1354 HYD-AQTMFV1 Distributor Tube 1” X 54” FL-19477 Brine & Solution Tanks Clack Feeder & Parts Solution Tanks Item # List 35 gal 18\" x 33\" CLK-G21832P Brine Tank c/w Safety Float Item # List 30 gal 15” x 32” FL-BTFLOAT Clack 42 gal 21” x 38” FL-BTFLOAT42 Permanganate 5 gal FL-33017 Safety Shut Off Float (Brine Tank) Feeder FL-13622 Felt Pad FL-33047 The Water System Experts Water Treatment & Filters 41

Res Care Feeder Starter Kit Pro Ban-T (Alkaline Water Neutralizer) If you own a water softener, you should be using Res-Care. Here's the bottom Pro Ban-T is a water softener iron removal line: Drip feeding Res-Care into your cleaner that is specially formulated to brine tank will pay for itself very quickly. effectively lower pH and remove iron and Your softener resin will last longer, your other contaminants from fouled water softener will run more efficiently, and you softeners. Ban-T is an environmentally will save money. Res-Care will maintain friendly water softener iron removal your resin safely and effectively, and the cleaning agent that removes hard water auto drip feeder makes it easy to deposits, lime scale and moderate iron consistently dose the right amount. staining from household fixtures. Includes: Auto Drip Feeder & 2 lt Res Care Liquid. Item # List CH-PROBAN Item # List 4 lb Container FL-RESFEED Res Care Liquid Resin Cleaner Pro Neutra Sul Resin cleaner maintains performance Formulated to neutralize the rotten egg of softener resin. Pro Res Care is a smell and pollutants from any water specially formulated liquid resin cleaner supply through oxidation. Neutra Sul designed to clean resin pores of iron, should be used in place of Hydrogen manganese, silt, metal particles and Peroxide 7% solution to prevent the organic compounds that cause softener formation of colors, tastes, corrosion and inefficiencies. Regular use of Res Care scaling by pollution degradation. resin cleaner will restore the softener beads and control valve parts back to Item # List peak efficiency and maintain the life of CH-HP4IN the unit. For best results, use a Res Care Automatic Feeder or manually add during CHECK OUR WEB SITE regeneration to prevent mineral build up. Pro Res Care • Up To Date Pricing is NSF Certified to meet NSF/ANSI Standard 60 for • Technical Information drinking water additives. vanislewater.com Size Item # List 1 Gallon CH-RESCARE Super Iron Out Water Softener Resin Softener Resin Cleaner Super Iron Out chemically changes rust Premium high capacity gel polystyrene and iron into a clear, soluble state that strong acid cation exchange resin easily rinses away without scrubbing. supplied regenerated in the sodium form. Suitable for use as either residential or Item # List commercial water softening equipment. CH-IRON28 28 oz CH-IRON5 equipment Buy 6 or 5 lb Item # List more and 1 cft MED-21501 save 20% Potassium Permanganate Water Softener Salt Ideal carbon for general taste and odor Contains up to 99.6% pure salt. removal as well as chlorine, chloramine Evaporated naturally by the sun and wind, and hydrogen sulfide reduction. these solar crystals have a white, opaque appearance and a low insoluble content. Item # List Formulated to resist mushing and bridging, CH-POT2 minimizing the accumulation of brine tank 5 lb residue. Bulk Price For 6 CH-POT2 (Save 10%) Item # List DANGEROUS GOODS SHIPPING REGULATIONS APPLY 18 kg (40 lbs) CH-SALT18 (Should Be Picked Up In Person) Bulk Price (63 Bags) CH-SALT18 42 Water Treatment & Filters vanislewater.com 1-888-444-8497

Filter Media Multi-Use Nextsand (Processed Filter Ag) Ion Exchange (Ecomix A) Advanced turbidity and sediment reduction media capable of filtration Efficient removal of five major pollutants, down to the 3 to 5 microns with regardless of pH, chlorine and hydrogen higher flow rates, less pressure sulfide content in the source water. drop and lower backwash rates than Removes: Hardness, Iron, Manganese, multi-media filters. Ammonium and Total organic carbon. Item # List Item # List 1 cft (55 lbs) MED-NEXTSAND MED-EM25L 1 bag MED-EM25L12CF 1/2 bag ResinTech SBACR-MP Manganese Greensand Plus A chloride form acrylic macroporous strong base anion resin. Allows organic Common media used for the removal of ions to move in and out of the resin easily. iron, manganese, and hydrogen sulfide. Intended as an organic trap when the highest possible removal of naturally Item # List occurring organics is needed. 1/2 cft MED-52000 Item # List MED-SBACRMP Calcium Carbonate Calcite Water Softener Resin Industry-leading media to raise pH. Item # List Premium high capacity gel polystyrene .6 cft MED-3237605 strong acid cation exchange resin supplied regenerated in the sodium form. Suitable for use as either residential or commercial water softening equipment. Activated Carbon (12/40 Mesh) Item # List Buy 6 or 1 cft MED-21501 more and Carbon absorbs organic compounds save 20% which produce taste, odor, color or toxicity and reduces free chlorine. Item # List Katalox Light 1 cft MED-C1 Buy 6 or more and save 20% Advanced catalytic filtration media for iron, manganese and hydrogen sulfide removal. Centaur Carbon Item # List (For Catalytic Units) 1 cft (66 lbs) MED-KATALOX Ideal carbon for general taste and odor removal as well as chlorine, List Metsorb chloramine and hydrogen sulfide reduction. A highly effective granular adsorbent that removes arsenic III & V, and Item # a wide variety of heavy metals including Lead, Cadmium, Copper, 1 cft MED-22018 Chromium+6, Selenium, and Zinc from aqueous sources. Its adsorbent ResinTech Mixed Bed technology utilizes a patented Titanium compound to adsorb both High purity grade H/OH form. Designed forms of arsenic as well as a wide to produce very high water quality and range of contaminants in water. The to separate easily for regeneration. increased surface area afforded by Intended for use in all mixed bed Titanium coupled with advanced pore deionization applications that require volume provides excellent kinetics of high resistivity and high capacity. adsorption. Item # List Item # List 1 cft (55 lbs) MED-MBD15 1 cft MED-METSORB1CU The Water System Experts Water Treatment & Filters 43

Water Softener Trouble-Shooting Guide PROBLEM CAUSE CORRECTION 1 Softener fails to A) Electrical service to unit has A) Assure permanent electrical service regenerate been interrupted. (check fuse, plug, pull chain or switch) B) Timer is defective. B) Replace timer motor. C) Power failure occurred. C) Reset time of day 2 Softener delivers A) By-pass valve is open. A) Close by-pass valve. hard water B) No salt in brine tank. B) Add salt to brine tank and maintain C) Injectors or screen plugged. salt level above water level. D) Insufficient water flowing into C) Replace injectors and screen. brine tank. D) Check brine tank fill time and clean E) Hot water tank hardness. brine line flow control if plugged. F) Leak at distributor tube. E) Repeated flushings of the hot water tank is required. G) Internal valve leak. F) Make sure distributor tube is not H) Reserve capacity has been cracked. Check O-ring and tube pilot. exceeded. G) Replace seals and spacers I) Program wheel is not rotating with and/or piston. meter output. H) Check salt dosage requirements J) Meter is not measuring flow. and reset program wheel to provide additional reserve 3 Unit uses too A) Improper salt setting. much salt B) Excess water in brine tank. I) Pull cable out of meter cover and rotate manually. Program wheel must move without binding and clutch must give positive “clicks” when program wheel strikes regeneration stop. If it does not, replace timer valve head. J) Check output by observing rotation of small gear on front of timer with water running in house (Note: program wheel must NOT be against regeneration stop (0) for this check.) Each tooth to tooth is approximately 30 gals. If not performing properly, replace meter cover (dome). A) Check salt usage and salt setting. B) See problem #7 4 Loss of Water A) Iron buildup in line to water A) Clean line to water conditioner Pressure conditioner B) Clean control and add resin cleaner B) Iron buildup in water conditioner to resin bed. Increase frequency of regeneration. C) Inlet of control plugged due to foreign material broken loose from pipes by C) Remove piston and clean control. recent work done on plumbing system. 5 Loss of resin A) Air in water system. A) Assure that well system has proper air eliminator control. Check for dry well through drain line condition. 6 Iron in A) Fouled resin bed. A) Check backwash, brine draw and brine conditioned tank fill. Increase frequency of water regeneration. Increase backwash time. 44 Water Treatment & Filters vanislewater.com 1-888-444-8497

PROBLEM CAUSE CORRECTION 7a Excessive water A) Plugged drain line flow control. A) Clean flow control. in brine tank 7b Salt water in A) Plugged injector system. A) Clean injector and replace screen. service line B) Timer not cycling. B) Replace timer. C) Foreign material in brine valve. C) Clean or replace brine valve. 8 Softener fails to D) Foreign material in brine line D) Clean brine line flow control. draw brine flow control. A) Clean drain line flow control. B) Clean or replace injectors. A) Drain line flow control is plugged. C) Replace screen. B) Injector is plugged. D) Increase line pressure (Pressure C) Injector screen plugged. D) Line pressure is too low. must be at least 20 PSI at all times). E) Change seals, spacers and/or piston E) Internal control leak. assembly. 9 Control cycles A) Faulty timer mechanism. continuously A) Replace timer. A) Foreign material in control. 10 Drain flows A) Remove piston assembly and continuously B) Internal control leak. inspect bore. Remove foreign C) Control valve jammed in brine or material and check control in various regeneration positions. backwash position. D) Timer motor stopped or jammed. B) Replace seals and/or piston assembly C) Replace seals and/or piston assembly D) Replace timer. 11 Piston Stuck in A) It is very common for the main and brine A) Replace the main piston and the Control Valve pistons to need replacement after 5-10 brine piston assembly. If the valve years of use. The valve will get stuck is on a chlorinated water source or trying to complete a regeneration cycle. over 10 years old, it’s a good idea Very often this occurs at the beginning of to replace the main piston seals at the “brine rinse” cycle. The timer motor the same time. may stop at this point also. The motors are made to stop instead of forcing the On rare occasions the timer motor valve (which results in gear damage). may also need to be replaced. Try the pistons replacement first, this usually does the trick. 12 Gears inside the A) To test if gears need replacement, remove the meter dome, turn the cable by hand metered dome and observe the small white gears inside. You should be able to make them turn cover fail with normal finger pressure. They should also continue to spin for a moment after you stop applying pressure. If you cannot turn the white gear, you need to replace the “meter cover”. Most residential models use the standard range (0-21, i.e. 2,100 gallons) black plastic meter cover and matching program wheel on the control. There is an extended range (0-55, i.e. 5,500 gallons) that is also available. Fleck also makes a brass 1” meter. This would only be found on large commercial applications. The Water System Experts Water Treatment & Filters 45

Inline Filter w/ SS Screen Premium line of rugged and easy to clean filter when visual inspection of accumulated debris is important. • Accommodate smaller applications at a very affordable price. • Handle high pressure associated with secondary water. • The industry recognizes this filter as the standard for function and dependability. • 100% stainless steel screen. • Heavy duty construction. • 200 PSI max. Working pressure. • Simple center flush - makes cleaning easy. • Easy access to element without the use of tools for manual cleaning. • Max temp 73º F. Size Element Flow GPM LxW PSI Loss Item # List 1” Slip 50 mesh 0 - 40 9\" x 5\" 3.3 @ 20 GPM AFI-150 1 1/2” Slip 100 mesh AFI-1100 50 mesh 0 - 60 12\" x 5 5/8\" 2.4 @ 35 GPM AFI-1550 2” Slip 100 mesh AFI-15100 150 mesh 0 - 90 13 3/4\" x 6 1/4\" 3.7 @ 60 GPM AFI-15150 200 mesh AFI-15200 32 mesh AFI-232 50 mesh AFI-250 100 mesh AFI-2100 150 mesh AFI-2150 High Flow 3\" Filters are Available. Contact us for more info. Size Rep. Elements Item # List 1\" 8 mesh AFI-S18 32 mesh AFI-S132 Mesh vs Micron 1 1/2” 50 mesh AFI-S150 100 mesh AFI-S1100 Mesh Micron 2” 150 mesh AFI-S1150 2” 200 mesh AFI-S1200 8 = 2,380 32 mesh AFI-S1532 50 mesh AFI-S1550 32 = 500 100 mesh AFI-S15100 150 mesh AFI-S15150 50 = 297 200 mesh AFI-S15200 8 mesh AFI-S28 100 = 149 32 mesh AFI-S232 50 mesh AFI-S250 150 = 106 100 mesh AFI-S2100 150 mesh AFI-S2150 200 = 75 200 mesh AFI-S2200 Sumps AFI-CC20 1\" Sump O-Ring Kit AFI-OR10 1 1/2” AFI-OR15 AFI-OR20 2” Y Strainer Filters In-Line Filters Remove debris from the water Item # List source, reducing clogged MI-50LF emitters and sprinkler nozzles. Item # List 1/2\" Poly Inline Filter MI-75YF w/80 Mesh Screen MI-75LF Wye Filter, 3/4” MIPT, 155 mesh MI-75YFGH MI-75LFSCREEN Wye Filter, 3/4” GHT, 155 mesh MI-75YSRS Garden Hose Inline Filter, Wye Filter Repl. Screen, 155 mesh 3/4” GHT, 120 mesh Inline Repl. Screen, 120 mesh 46 Water Treatment & Filters vanislewater.com 1-888-444-8497

Filter Housings Made to house 2.5\" diameter cartridges. Ideal for typical applications as pre and post- Width Length Case Size Item # List filtration for RO systems, under sink filters, 2.5\" 10\" 12 3/8” HYD-HF210BLBK38 List countertop systems, ice machines, food 2.5\" 10\" 12 1/2” HYD-HF210WHWH12 service and other applications. • Maximum - 75 PSI • Temperature 40-125 deg F Filter Housings High durability commercial filter housings for C/W Air Release Button 10\" and 20\" length cartridges. Housing have excellent chemical resistance and are ideal Width Length Case Size Item # for many residential, commercial and light industrial applications. 2.5\" 5\" 3/8\" HYD-HF25WHWH38 2.5\" 10\" 12 3/4\" HYD-HF510BLBK34PR 2.5\" 20\" 8 3/4\" HYD-HF520BLBK34PR • Maximum FH10 & 20 - 100 PSI • Temperature BB10 & 20 - 90 PSI 4.5\" 10\" 6 1” HYD-HF4510BLBK10PR FH10 & 20 - 40-125 deg F BB10 & 20 - 90 deg F 4.5\" 20\" 4 1” HYD-HF4520BLBK10PR 4.5\" 20\" 4 11/2\" HYD-HF4520BLBK15PR Note: Hand Tighten Only. Silicone Lube Recomended. Filter Housings • Three piece design for easy disassembly. High Flow, Three Piece • Maximum pressure 100 PSI. • Pressure release button and drain plug. Cartridge Length Size Item # List • Mounting bracket/wrench are included in 4.5\" 10\" 1\" STE-AWP40B price. 4.5\" 20\" 1\" STE-AWP42B • Threaded port for pressure gauge installation. Hydronix 4.5\" Stainless Steel Ideal for commercial and industrial filter Single Element Filter Housings application. Made with Heavy duty 304 or 316 stainless steel construction for maximum durability, Uses 4 1/2'' diameter Description Ports Drains Item # List (Big Blue style) Double Open-End (DOE) Accepts 4.5\" x 10\" 1\" 1/4\" HYD-T130434 cartridges. Designed for operation up to 250°F (120°C) and high-pressure Filter Cartridge FNPT FNPT Accepts 4.5\" x 20\" 1\" 1/4\" HYD-T130434 applications, the housings ring nut closure provides quick cartridge change outs. Filter Cartridge FNPT FNPT Stainless Steel Filter Housings • Maximum - 250 PSI. Hot & Cold Water • Temperature 200°C (425°F). • 304 Stainless Steel Sump & Head. Length Size Item # List F-FHSS10 2.5\" 10\" 3/4\" F-FHSS20 2.5\" 20\" 3/4\" See Page 50 for Mounting Brackets, Wrenches and Replacement O-Rings Ecosoft 3 Stage Under Sink Replacement Filter Package Water Filtration System • Three stage filtration. • Cartridges included. • John Guest fittings used. • Spring water quality. • Use with 3 stage RO and under • Full set of accessories, filters the sink units. and fittings in the box. Item # List ECO-CMV3ECOEXP Item # List ECO-FMV3ECOEXP The Water System Experts Water Treatment & Filters 47

Hydronix Residential Reverse Osmosis System (NSF Certified) 5 stage Item # List 50 gallon per day HYD-RO550Q1 With the quality of our drinking water increasingly coming under question, people are now looking for alternative sources of quality water. Reverse Osmosis Drinking Water Systems provide the most convenient and economical solution. Neatly stored under the counter, the RO system provides you with clean and delicious water right from its own dedicated tap. Kit includes: TFC membrane, tubing, quick connects, storage tank & sink faucet. LIQ-R50-NSF Replacement Filters: • LIQ-510, (2) LIQ-CB1010, LIQ-M50, LIQ-ICE. Hydronix 300 Gallons Per Day Reverse Osmosis System Item # List HYD-RO300G Recovery Rate: 1:4 Product Waste Nominal Salt Rejection: 98% Operating Pressure: 120 PSI Water Hardness: < 120 PPM (7 GPG) Ph Range: 3 - 11 TDS: < 1500 PPM Hydronix 600 Gallons Per Day Reverse Osmosis System Item # List HYD-RO600G Recovery Rate: 1:4 Product Waste Nominal Salt Rejection: 98% Operating Pressure: 120 PSI Water Hardness: < 120 PPM (7 GPG) Ph Range: 3 - 11 TDS: < 1500 PPM Hydronix 3 Stage 100 GPD Reverse Osmosis System Item # List HYD-RO3100Q Recovery Rate: 1:4 Product Waste 98% Nominal Salt Rejection: 40 - 80 PSI < 120 PPM (7 GPG) Operating Pressure: 3 - 11 Water Hardness: < 1000 PPM Ph Range: TDS: 48 Water Treatment & Filters vanislewater.com 1-888-444-8497

Replacement R.O. Membrane Reverse osmosis filter cartridge removes dissolved solids, chemicals, micro-organisms Item # List and contaminants from water. HYD-TW181250 50 GPD TFC HYD-TW181275D • Replacement RO Membrane for Aquaflo, 75 GPD TFC HYD-TW2012100 Puretec, Vectapure, & other generic models. 100 GPD TFC Replacement 3.2 Gallon • Stainless steel connector, side mounting for R.O. Storage Tank air valve. Max. PSI Item # List • Maximum working pressure: 100 PSI. 100 HYD-RO132W14 • Tank stand included. Mounting R.O. Clips Item # List Fits RO System Membranes requiring 2-1/2\" Clips to connect to a 2\" In-Line Filter (or In-Line 2\" x 2 1/2\" RO Mount Clip HYD-CLP2520W UV) (Pkg 2) Your best choice for limiting water pressure to your Hydronix Shok Blok water filtration device. Designed for high pressure Filter Protection Valve installations to protect reverse osmosis systems, water filters, ice makers, coffee machines, chillers, Item # List hot tanks and water coolers to name a few. HYD-SBFVB70 1/4\" Quick Connects Hydronix Flow Restrictor List Hydronix Flow Restrictors are used to control Item # the amount of water your RO can produce per day. Ideally the RO membrane GPD is matched 36 GPD HYD-IFR420QC with the same restrictor. 55 GPD HYD-IFR550QC 100 GPD HYD-IFR1000 Lead Free Faucets For use in drinking water or reverse osmosis Finish Item # List systems. Available in most of the popular finishes including: Antique Wine, Satin Nickel, Antique Wine HYD-LFEC25AW1 Brushed Nickel and Chrome Plated. Satin Nickel HYD-LFEC25BN1 Chrome Plated HYD-LFEC25CP1 Elegant Ceramic Faucet The LF-EC32 faucet serves as a dedicated dispenser for reverse osmosis (RO) water. Its Finish Item # List stylish look complements any kitchen. Enjoy Chrome Plated HYD-LFEC32CP1 the convenience of ultra-purified RO water for Brushed Nickle HYD-LFEC32BN1 cooking and drinking straight from this faucet. Faucets Chrome Plated Brass Faucet Hydronix LF Series Lead Free Faucets are NSF certified. Item # List • Made of high quality material. HYD-LFBLR • Professional workmanship. 3”, Long Reach, 3/8” UNS Flowlok Leak Detector The Flowlok Safety Kit combines the Flowlok Item # List leak detector and a safety tray in one box. It 1/4\" Valve HYD-FLK14 comes with installation instructions and two 1/4\" Valve & Tray HYD-FLKKIT safety discs. An absolute MUST HAVE on all Replacement Pad HYD-FLKPAD below sink water filtration systems! The Water System Experts Water Treatment & Filters 49

Mounting Brackets Item # List • Fits Hydronix & Pentek Housings. HYD-FM20W #10, #20 • Made from white powder coated, cold BB #10, #20 HYD-FM25W rolled steel. Double #10, #20 HYD-FM40W Wrenches Pentek Housing Item # List Hydronix Housing F-158002 F-SW1 FH1003, FH1005 Item # List F-SW2 FH10, FH20 HYD-FW1 FH10, FH20, Pentek F-SW3 FHBB10, FHBB20 HYD-FW2 FHBB10 (old), Pentek F-SW4 HYD-FW3 FHBB20 (old), Pentek O-Rings Hydronix Housing Item # List Pentek Housing Item # List FH1003, FH1005 HYD-HF23ORING 2.74 HYD-HF5ORING F-158002 Pentek OR-237 2.74 FH10, FH20 HYD-HF45ORING 5.99 FHBB10, FHBB20 FH10, FH20, Pentek OR-241 6g Silicon O-Ring Lubricant PA-LPST111 When Replacing O-Rings it is Recommended to use Silicone Lubricant. Aqualux Shower Filter for Reduces the harmful effects of chlorine and other Dechlorinating and pH Balancing contaminants. The 4 stage filtration process utilizes Coconut Shell Carbon, KDF Chlorine Scavenging Item # List media, BioCeramic pH Balancing spheres and HYD-HDGSFCH Sediment filtration. Maximum flow: 1.3 - 2.6 GPM. Chrome Finnish Hydronix Empty Cartridges Can be used with carbon, resin, KDF or any other media. Made from High Impact Size Item # List Polystyrene to withstand continuous usage 10\" x 2 1/2\" HYD-EC2510C and media changes. Clear 10\" x 4 1/2\" HYD-EC4510W White 20\" x 4 1/2\" HYD-EC4520W Faucet Water Supply Hose • 1/2\" FIP x 3/8\" Compression. Length Item # List • Water supply hose for faucet,mixer,toilet or closestool. 20\" F-FT20 • Ok for hot/cold water. 36\" F-FT36 • Durable 304 high grade stainless steel wire Compression x MIPT Brass Connector braided hose. 3/8\" x 1/2\" F-FTCON 3/8\" x 1/4\" F-686B 3/8\" x 3/8\" F-686C Digital Tds Meter List • TDS Meter 3 - Measurement range: Item # MUR-TDSMETER • 0-9990 ppm with built-in digital thermometer. Commercial In-Line Dual TDS Monitor • Highly efficient and accurate due to its advanced microprocessor technology. Item # List HM-DM2 • Displays TDS levels of the Feed Water and Product Water with in & out electrode probes. • Auto-Off function conserves battery power. QUICK CHECK TDS & CONDUCTIVITY MONITOR • Eight programmable set points (by dip switch). • Bright LED lights. Item # List • Simple to use - Quick Easy Installation HM-QC1 • Factory Calibrated to 100 ppm NaCl. Re- calibration is unnecessary. 50 Water Treatment & Filters vanislewater.com 1-888-444-8497