WG Catalogue 2021-2022

SNOW PLOUGHS 303 HEAVY DUTY PUSH ALONG SNOW PLOUGH ACCESS FROM 3-5 DAYS • Bi-directional snow plough • Simple design allows you to remove snow while keeping your £310.86 body in an upright, walking position • Minimises work by pushing instead of lifting and throwing BEST SELLER • Angled plough to allow snow to slide off the side of the blade HANDLING • Simply flip the handle to choose which side the snow is ploughed • Manufactured from mild steel with epoxy coated finish • Product is supplied fully assembled. • 160mm solid rubber tyred wheels and roller bearings Overall Width mm 1000 STORAGE Overall Depth mm 1140 Overall Height mm 1000 WORKSHOP Blade Height mm 330 Blade Width mm 1000 Weight kg 28 Ref WGHSP-4 Price £310.86 HEAVY DUTY SNOW PLOUGH SHELVING & RACKING FROM 7 DAYS • Heavy duty snow plough and yard scraper attachment to fit most fork lift trucks £657.09 • Fixed left hand sweep angle of 15 degrees • Heavy duty concave blade with bolt on 12mm thick reversible BEST SELLER rubber wear strip OFFICE • Wear strip thickness: 12mm • Blade height: 510mm PREMISES • Choice of 1200, 1500 or 2000mm blade widths • Overall depth: 1350mm • Plough fits over forks, secured with zinc plated ‘T’ bar screws • Fork pockets (H x W): 160 x 50mm. Fork centres: 800mm • Finish: Yellow epoxy coated Snow Plough Replacement Rubber Wearstrip Blade Width mm Weight Ref Price Blade Width mm Ref Price 1200 79 WGFSP-1 £657.09 1200 WGFSP-1RB £43.69 1500 98 WGFSP-2 £755.41 1500 WGFSP-2RB £48.60 2000 123 WGFSP-3 £912.02 2000 WGFSP-3RB £53.39 303

304 GRIT SPREADERS ACCESS CONTRACT SALT SPREADERS FROM • Superb range with up to 3 meters of spreading capacity • Adjustable gearbox £149.00 2-3 DAYS • Fitted with rugged pneumatic wheels • Supplied flat pack for self assembly HANDLING • Recommended use with processed salt and ice melts STORAGE WORKSHOP SHELVING & RACKING Capacity kg Ref Price Capacity kg Ref Price 22 WG380944DT1 £149.00 36 WG380945DT1 £199.00 LOADTEK SALT SPREADER FROM • UK manufactured product • Supplied fully assembled £310.85 5 DAYS • Hard wearing pneumatic wheels perfect for uneven ground • Adjustable lever to control salt spreading speed and distance BEST SELLER • Reccommended use with processed salt and ice melts OFFICE Capacity litre Ref Price 20 WGHSP-5 £310.85 PREMISES 304

SKIP BINS 305 AUTOMATIC SELF-TIPPING SKIPS ACCESS FROM £299.00 5-7 DAYS • A robust range of rear entry automatic tipping skips • Ideal for all types of waste handling • Activated by running container against side of a larger container HANDLING • For best performance the skip must be full • Designed for use with fork lift trucks but can also be used with Stackers (conversion kit required) and can be moved with pallet trucks • Manufactured from 2.5 or 3mm steel plate STORAGE WORKSHOP Lid sold seperately SHELVING & RACKING B2 B2 B1 Volume Litres External L x W x H mm B1 B2 Ref Price OFFICE 150 815 x 760 x 580 630 230 WG305010 £299.00 300 1235 x 840 x 750 630 230 WG305011 £399.00 PREMISES 600 1525 x 865 x 870 630 230 WG305012 £499.00 900 1525 x 1215 x 870 630 230 WG305013 £599.00 1100 1700 x 1215 x 1045 630 230 WG305014 £699.00 1600 2073 x 1066 x 1248 630 230 WG305015 £849.00 2000 2073 x 1316 x 1248 1035 230 WG305016 £1049.00 2500 2073 x 1566 x 1248 1035 230 WG305017 £1149.00 3000 2073 x 1866 x 1248 1035 230 WG305018 £1299.00 Accessories Capacity kg Height mm Wheel Ø mm Ref Price 1050 190 150 WG30491 £89.00 Description 1800 200 200 WG30700 £119.00 (A) Nylon wheel set 900 195 160 WG30087 £99.00 (A) Nylon wheel set 1200 240 200 WG30701 £129.00 (B) Polyurethane wheel set - - - WG30089 £75.00 (B) Polyurethane wheel set (C) Stacker conversion kit Get in contact for prices on optional lids 305

306 SKIP BINS ACCESS TILTING SKIP BIN • Choice of two capacities – 200kg (200 litres) or 400kg (260 litres) • Fabricated sheet steel body mounted on square frame chassis FROM • Reinforced body rim • No sharp edges £532.37 15 DAYS • Handle for pushing and load dumping • Load will not tip until retaining latch is released by the operator HANDLING • Welded fork guides are available as an option • Finish: Blue epoxy • Wheels: 200mm diameter axle mounted front wheels with single 200mm diameter rear swivel castor, fitted with solid rubber tyres and roller bearings STORAGE Capacity 250kg 400kg Body size L x W x H mm 1050 x 580 x 525 1200 x 630 x 700 Overall size L x W x H mm 1175 x 850 x 790 1320 x 900 x 970 Weight 68kg 75kg Ref WGSB08 WGSB10 WORKSHOP Price £532.37 £583.33 Including perf. base & drain tap Loose fitting perforated base and drain tap. Weight 71kg 78kg OPTIONAL EXTRAS: Ref WGSB08DT WGSB10DT Total stop brakes on single swivel castor Ref: WGB013/1 Price £8.73 Price £621.93 £672.95 Fork lift pockets (factory fitted extra) 125 x 40mm SHELVING & RACKING Ref WGSB/FP WGSB/FP Price £49.37 £49.37 WHEELBARROW SKIP • Fully welded construction in sheet steel with formed top edge and front nose strengthening FROM • Tubular push handle continues down length of body for extra strength £406.86 15 DAYS • Front and rear tubular supports allow for static and tipping use • Finish: Blue epoxy OFFICE • Wheels: Fully supported tubular axle fitted with choice of 400mm diameter solid rubber or pneumatic tyred wheels with roller bearings PREMISES Body dims L x W x H mm 1155 x 625 x 460 1155 x 625 x 460 Overall dims L x W x H mm 1650 x 900 x 680 1650 x 900 x 680 Weight kg 58 47 Wheel type Solid Pneumatic Ref WGSB12 WGSB12P Price £416.39 £406.86 306

SPECIALS SERVICE 307 Need something out of the ordinary? Why not use our specials service. This catalogue contains many hundreds of products and variations, but no matter how many we offer, there will always be a requirement for something different or special. Our specials service is here to provide solutions to those specific requirements. All you need to do is tell us what you need it to do, or sketch it out. Our design team will work with you to produce the ideal product for your special requirements. We can help in two ways, either adapt a product, starting with one of our standard products and amend it to your requirements. Or, design from scratch, starting from a blank piece of paper we will come up with a solution to solve your needs. All our special products can be made as a ‘one off’ or on batch production, just tell us how many you need. To contact your nearest Work Gear distributor please call 01527 529002 or email [email protected] 307

TOUGH SOLUTIONS FOR THE WORKPLACE www.workgearhq.co.uk We reserve the right to alter designs and specifications without prior notice. All technical data, dimensions, weights etc. stated in this catalogue serve only as a guide. The seller cannot accept any liability which may be attributed in any way to the use of this information. All goods are sold strictly in accordance with our terms and conditions of sale, details are available on request.