MATO Belt Lacing Systems Heavy Duty

Catalogue 2015 seit 1906Belt Lacing Systems forHigh Tensile Conveyor Belts above 750 kN/mTechnology in Motion

Table of Contents 4 5 Belt Lacing Systems for High Tensile Conveyor Belts 7 High Performance Fasteners U68, Machine Installed Plate Fasteners and Accessories High Performance Fasteners U30, Machine Installed Plate Fasteners, Stainless Steel Fasteners S30S, Machine Installed Plate Fasteners Eco-Fasteners E30, Machine Installed Plate Fasteners Accessories for Machine Installed Systems U30, S30S, E30 7 Connecting Pins for Systems U68, U30, S30S, E30 14 Stainless Steel Fasteners H60S,H30S, Hammer Installed Plate 22 23 Fasteners 24 26 Eco-Fasteners H60E, H60E, Hammer Installed Plate Fasteners 27 Eco-Fasteners MR30, Hammer Installed Plate Fasteners Accessories for Hammer Installed Systems H60, H30, MR30 Connecting Pins for Systems H60, H30, MR30 Standard Fasteners MS, Screw Installed Fasteners 31 High-Carbon Steel Fasteners MS H, MS B, Screw Installed Fasteners 32 Stainless Steel Fasteners MS S, Screw Installed Fasteners 32 Repair Fasteners S80, Hammer Installed Fastener 33 Tools and Templates for Screw Installed Systems MS 34 Belt Clamp 60 kN 37 Belt Clamp 30 kN 37 T-Square 37 Belt Cutter TMG, T, ECO, and Accessories 38 Belt Cutter HD, Spare Blades for Belt Cutter 381,2,3.. § Abc... §…. Order No. Index, Terms & Conditions, General Remarks 39 1 Please note: pictures may differ from original product 1 Product Catalogue 2015

High Performance Fasteners I M2 c Machine Installed Plate Fasteners2 Product Catalogue 2015 2

Selection Chart for Machine Installed Plate FastenersFasteners U68 and U68A are another step-up compared to our U30 Fasteners, so far the safest andthe highest performance mechnical Fasteners worldwide. The outstanding features of both types are:Press fit of spring steel Plate compressed into the staple belt with up to 4 tons force (vice like effect) Additionally, Fasteners U68 and U68A have a deeper reachback and higher High Wear plate thickness, bringing even more Resistant safety and wear resistance. Chromium SteelStaple guarded by forged Cold forged plate w. loop pocket for highest strengthsThe S30S-System is used in applications where higher corrosion is a problem. In comparison toU30, the S30S has stainless steel staples.The E30-System is used in applications with regular and short runtime.In comparison to U30, the E30 has special steel staples and carbon steel plates. Belt Thickness (mm) Belt Strength Min. Drum5 6 7 8 9 10 11 12 13 14 15 16 17 18 >18* (kN/m) DiameterU35A up to 1050 250 mmS35AS E35A U35 S35BS E35B U37A up to 1400 350 mm S37AS E37A U37 S37BS E37B S37CS 600 500 mm E37C mm U38A up to 3500 U38 U68A up to 4000 U68Materials Plate / Staples:Cr (S)- / Spring Steel Cr (S)- / CrNi (SS) Steel Carbon- / Special Steel* Thicker belts can be skived (covers) to fit3 Product Catalogue 2015 3

High Performance Fastener U68 I M2 c Machine Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener U68A - Standard 4.8 5.6Belt Strength up to 4000 kN/m Minimum Pulley Diameter 600mm 6.5up to 1000mm 12-15mm 41 168 15 00 4.8up to 1200mm 12-15mm 41 168 15 12 5.6up to 1400mm 12-15mm 41 168 15 14 6.5Belt Fastener U68 - StandardBelt Strength up to 4000 kN/m Minimum Pulley Diameter 600mmup to 1000mm 15-18mm 41 168 14 44up to 1200mm 15-18mm 41 168 14 45up to 1400mm 15-18mm 41 168 14 46 -High compression into the belt -Press fit of staples -Staple guard -Cold forged plate with loops for highest strengths -High wear resistant plate material (chromium steel) -High tensile spring steel staples Staple Material: Spring Steel Plate Material: Stainless Chromium Steel Units: based on boxes with Fastener Strips of 200mm length, (can be shortened individually).Content is sufficient for one complete lace of according belt width (without Connecting Pin) Accessories I M2 c for Machine Installed System U68 (limited use with systems U30, S30S, E30)Belt Width Order No. kgScrew Clamping Frame SS 68 (Stainless Steel)up to 1200mm 41 129 44 17 33.6 For use with Lacers LM 35-68 and YM-D2S as well asup to 1400mm 41 129 44 18 36.2 Machine Skivers XTV / XTV-BS. For installation ofup to 1600mm 41 129 44 19 40.0 Fastener series U68A / U68 Picture see page 7Screw Clamping Frame MF 68 (Stainless Steel) For use with Lacers LM 35-68 and YM-D2S as well asup to 1200mm 42 160 20 13 39.6 Machine Skivers XTV / XTV-BS. For installation ofup to 1400mm 42 160 20 12 43.3 Fastener series U68A / U68. Quickens the installationup to 1600mm 42 160 20 11 47.4 process and minimizes errors. Picture see page 8Lacers with manual transport For use with Frames SS-68 and MF-68. Pneumatic Lacer LM 35-68 installs all Fasteners of the series U68 / U68A.Pneumatic Lacer LM35-68 41 130 40 12 24.0 Driven by compressed air 4-8 bar Picture see page 8Hydraulic Lacer YM-D2S 41 304 44 00 21.7 For use with Frames SS-68 and MF-68. Hydraulic Lacer YM-D2S installs all Fasteners of series U68 / U68A.Machine Skiver U68 42 124 00 07 Driven by hydraulic power, pressure range 120 - 160 bar / 42 124 00 10 8l/min.Machine Skiver XTV-BS Picture see page 8Skiving on both sidesMachine Skiver XTV Reduction of covers of conveyor belts. For use withSkiving on one side 6.9 Frames MF and SS. Belt thickness 7-31mm. Skiving on both sides together with Frame MF only. Blade XTV can be adjusted to skiving width, enables cleaner friendly 6.9 skiving. Crank Drive. Picture see page 10Connecting Pins see pages 14 - 19. Product Catalogue 2015 4 4

High Performance Fastener U30 I M2 c Machine Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener U35A - Standard 2.6 3.1Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 3.6up to 1000 mm 5 - 9 mm 41 114 14 29 2.7up to 1200 mm 5 - 9 mm 41 114 14 30 3.2up to 1400 mm 5 - 9 mm 41 114 14 31 3.7Belt Fastener U35 - Standard 3.2 3.8Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 4.5up to 1000 mm 7 - 11 mm 41 114 07 16 3.2up to 1200 mm 7 - 11 mm 41 114 07 12 3.9up to 1400 mm 7 - 11 mm 41 114 07 10 4.5 -High compression into the beltBelt Fastener U37A - Standard -Press fit of staples -Staple guardBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm -Cold forged plate with loops for highest strengths 4.2 -High wear resistant plate material (chromium steel)up to 1000 mm 8 - 12 mm 41 114 15 54 5.0 -High tensile spring steel staplesup to 1200 mm 8 - 12 mm 41 114 08 12 5.8up to 1400 mm 8 - 12 mm 41 114 08 16 Staple Material: Spring Steel Plate Material: Stainless Chromium SteelBelt Fastener U37 - Standard 4.2 Units: based on boxes with Fastener Strips of 200mm length, (canBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm be shortened individually).Content is sufficient for one completeup to 1000 mm 10 - 14 mm 41 114 00 18 5.0 lace of according belt width (without Connecting Pin)up to 1200 mm 10 - 14 mm 41 114 00 15 5.9up to 1400 mm 10 - 14 mm 41 114 00 12 2.7Belt Fastener U38A - Standard 3.2 3.8Belt Strength up to 3500 kN/m Minimum Pulley Diameter 500 mm 2.8up to 1000 mm 12 - 15 mm 41 114 15 21 3.3up to 1200 mm 12 - 15 mm 41 114 14 22 3.9up to 1400 mm 12 - 15 mm 41 114 14 14 3.3Belt Fastener U38 - Standard 4.0 4.6Belt Strength up to 3500 kN/m Minimum Pulley Diameter 500 mm 3.4up to 1000 mm 15 - 18 mm 41 114 14 16 4.0up to 1200 mm 15 - 18 mm 41 114 14 19 4.7up to 1400 mm 15 - 18 mm 41 114 17 82 - Sealing prevents spillage of the material and increasesBelt Fastener U35A+ - Sealed life of the Connecting Pin by a grease filling 4.3Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 5.2 Staple Material: Spring Steel 6.1 Plate Material: Stainless Chromium Steelup to 1000 mm 5 - 9 mm 41 114 15 47up to 1200 mm 5 - 9 mm 41 114 07 35 Units: based on boxes with Fastener Strips of 200mm length, (canup to 1400 mm 5 - 9 mm 41 114 07 09 be shortened individually).Content is sufficient for one completeBelt Fastener U35+ - Sealed 4.3 lace of according belt width (without Connecting Pin) 5.2Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 6.2up to 1000 mm 7 - 11 mm 41 114 07 17up to 1200 mm 7 - 11 mm 41 114 07 18up to 1400 mm 7 - 11 mm 41 114 07 08Belt Fastener U37A+ - SealedBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mmup to 1000 mm 8 - 12 mm 41 114 15 55up to 1200 mm 8 - 12 mm 41 114 15 56up to 1400 mm 8 - 12 mm 41 114 15 59Belt Fastener U37+ - SealedBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mmup to 1000 mm 10 - 14 mm 41 114 00 21up to 1200 mm 10 - 14 mm 41 114 00 22up to 1400 mm 10 - 14 mm 41 114 00 24Belt Fastener U38A+ - SealedBelt Strength up to 3500 kN/m Minimum Pulley Diameter 500 mmup to 1000 mm 12 - 15 mm 41 114 15 22up to 1200 mm 12 - 15 mm 41 114 14 18up to 1400 mm 12 - 15 mm 41 114 14 15Belt Fastener U38+ - SealedBelt Strength up to 3500 kN/m Minimum Pulley Diameter 500 mmup to 1000 mm 15 - 18 mm 41 114 15 27up to 1200 mm 15 - 18 mm 41 114 14 23up to 1400 mm 15 - 18 mm 41 114 14 95Connecting Pins and Accessories see pages 7 - 12, 14 - 19. 5 5 Product Catalogue 2015

Stainless Steel Fastener S30S I M2 c Machine Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener S35AS - Standard 2.6 3.1Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 3.6up to 1000 mm 5 - 9 mm 41 114 07 68 2.7up to 1200 mm 5 - 9 mm 41 114 07 50 3.2up to 1400 mm 5 - 9 mm 41 114 07 44 3.7Belt Fastener S35BS - Standard 3.2 3.8Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 4.5up to 1000 mm 7 - 11 mm 41 114 07 73 3.2up to 1200 mm 7 - 11 mm 41 114 07 42 3.9up to 1400 mm 7 - 11 mm 41 114 07 45 4.5 -High compression into the beltBelt Fastener S37AS - Standard -Press fit of staples -Staple guardBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm -Cold forged plate with loops for highest strengths 3.4 -High wear resistant plate material (chromium steel)up to 1000 mm 8 - 12 mm 41 114 07 56 4.1 -Stainless Steel Staplesup to 1200 mm 8 - 12 mm 41 114 07 48 4.8 Staple Material: Stainless Steelup to 1400 mm 8 - 12 mm 41 114 07 46 Plate Material: Stainless Chromium SteelBelt Fastener S37BS - Standard Units: based on boxes with Fastener Strips of 200mm length, (can be shortened individually).Content is sufficient for one completeBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm lace of according belt width (without Connecting Pin)up to 1000 mm 10 - 14 mm 41 114 07 61up to 1200 mm 10 - 14 mm 41 114 07 43up to 1400 mm 10 - 14 mm 41 114 07 47Belt Fastener S37CS - StandardBelt Strength up to 1400 kN/m Minimum Pulley Diameter 500 mmup to 1000 mm 13 - 16 mm 41 114 07 80up to 1200 mm 13 - 16 mm 41 114 07 81up to 1400 mm 13 - 16 mm 41 114 07 64Belt Fastener S35AS+ - SealedBelt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mmup to 1000 mm 5 - 9 mm 41 114 07 69 2.7up to 1200 mm 5 - 9 mm 41 114 07 70 3.2up to 1400 mm 5 - 9 mm 41 114 07 85 3.7Belt Fastener S35BS+ - SealedBelt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mmup to 1000 mm 7 - 11 mm 41 114 07 74 2.8up to 1200 mm 7 - 11 mm 41 114 07 75 3.3up to 1400 mm 7 - 11 mm 41 114 07 66 3.9Belt Fastener S37AS+ - SealedBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mmup to 1000 mm 8 - 12 mm 41 114 07 57 3.3up to 1200 mm 8 - 12 mm 41 114 07 58 4.0up to 1400 mm 8 - 12 mm 41 114 07 67 4.6Belt Fastener S37BS+ - SealedBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mmup to 1000 mm 10 - 14 mm 41 114 07 62 3.4up to 1200 mm 10 - 14 mm 41 114 07 63 4.0up to 1400 mm 10 - 14 mm 41 114 07 83 4.7 Sealing prevents spillage of the material and increases lifeBelt Fastener S37CS+ - Sealed of the Connecting Pin by a grease fillingBelt Strength up to 1400 kN/m Minimum Pulley Diameter 500 mmup to 1000 mm 13 - 16 mm 41 114 17 48 3.6up to 1200 mm 13 - 16 mm 41 114 17 49up to 1400 mm 13 - 16 mm 41 114 07 84 4.3 Staple Material: Stainless Steel 5.0 Plate Material: Stainless Chromium SteelConnecting Pins and Accessories see pages 7 - 12, 14 - 19. Units: based on boxes with Fastener Strips of 200mm length, (can be shortened individually).Content is sufficient for one complete 6 Product Catalogue 2015 lace of according belt width (without Connecting Pin) 6

Eco-Fastener E30 I M2 c Machine Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener E35A - Standard 2.6 3.1Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 3.6up to 1000 mm 5 - 9 mm 41 114 07 38 2.7up to 1200 mm 5 - 9 mm 41 114 07 51 3.2up to 1400 mm 5 - 9 mm 41 114 92 01 3.7Belt Fastener E35B - Standard 3.2 3.8Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 4.4up to 1000 mm 7 - 11 mm 41 114 07 39 3.2up to 1200 mm 7 - 11 mm 41 114 07 40 3.9up to 1400 mm 7 - 11 mm 41 114 92 02 4.5 -Light compression into the beltBelt Fastener E37A - Standard -Staple guard -Cold forged plate with loopsBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm -High wear resistant plate material 3.4 -High tensile special steel staplesup to 1000 mm 8 - 12 mm 41 114 07 54 4.1up to 1200 mm 8 - 12 mm 41 114 07 49 4.7 Staple Material: Special Steelup to 1400 mm 8 - 12 mm 41 114 92 03 Plate Material: Carbon SteelBelt Fastener E37B - Standard Units: based on boxes with Fastener Strips of 200mm length, (can be shortened individually).Content is sufficient for one completeBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm lace of according belt width (without Connecting Pin)up to 1000 mm 10 - 14 mm 41 114 07 59up to 1200 mm 10 - 14 mm 41 114 07 41up to 1400 mm 10 - 14 mm 41 114 92 04Belt Fastener E37C - StandardBelt Strength up to 1400 kN/m Minimum Pulley Diameter 500 mmup to 1000 mm 13 - 16 mm 41 114 07 76up to 1200 mm 13 - 16 mm 41 114 07 77up to 1400 mm 13 - 16 mm 41 114 92 05 Accessories I M2 c for Machine Installed Systems U30, S30S, E30Belt Width Order No. kgScrew Clamping Frame S 41 129 43 01 28.5 41 129 44 01up to 1000 mm 41 129 46 01 32.5up to 1200 mm 41 129 47 01up to 1400 mm 36.1up to 1600 mm 40.0 For use with Lacers HM, LM and YM-D2S as well as Skivers S and HD. For installation of Fastener series U30, S30S and E30Screw Clamping Frame SS (Stainless Steel)up to 1000 mm 41 129 44 05 29.6up to 1200 mm 41 129 44 07 33.6up to 1400 mm 41 129 44 08up to 1600 mm 41 129 44 09 36.2 40.0 For use with Lacers HM, LM and YM-D2S as well as Skivers S and HD. For installation of Fastener series U30, S30S and E30Connecting Pins and Accessories see pages 7 - 12, 14 - 19. 7 7 Product Catalogue 2015

Accessories I M2 c for Machine Installed Systems U30, S30S, E30,Belt Width Order No. kgScrew Clamping Frame MF (Stainless Steel - makes belt handling easier)bis 1200 mm 42 160 20 03 39.6bis 1400 mm 42 160 20 02 43.3bis 1600 mm 42 160 20 01 47.4 For use with Lacers HM, LM, and YM-D2S as well as Belt Skivers S, HD, XTV / XTV-BS. For installation of Fastener series U30, S30S, and E30. Quickens the installation process and minimizes errorsQuick Clamping Frame SP 41 129 53 20 30.0 41 129 54 20bis 1000 mm 41 129 56 20 34.0bis 1200 mmbis 1400 mm 38.0 For use with Lacers HM, LM, and YM-D2S as well as Belt Skivers S and HD. For installation of Fastener series U30, S30S, and E30. Belt Clamping through prestressed Spring AssemblyLacers with manual transport For use with Frames S, SS, MF, and SP. The Manual Lacer HM 35-38 installs all Fasteners of the series U30, S30S, E30. Driven byManual Lacer HM 35-38 41 129 40 02 15.8 manual forcePneumatic Lacer LM 35-38 41 129 40 30 24.0 For use with Frames S, SS, MF, and SP. The Pneumatic Lacer LM 35-38 installs all Fasteners of the series U30, S30S, E30. Driven by compressed air 4-8barHydraulic Lacer YM-D2S 35-68 41 304 44 00 21.7 For use with Frames S, SS, MF, and SP. The Hydraulic Lacer YM-D2S 35-68 installs all Fasteners of the series U30, U68, S30S, E30. Driven by hydraulic power. Pressure range 120-160 bar / 8l/min. Incl. Storage case, see page 98 Product Catalogue 2015 8

Accessories Hydraulic Lacer YM-D2S 35-68Description Order No. kgStorage CaseStorage Case YM-D2S 41 304 44 01 Solid sheet metal470 x 248 x 348 mm (LxWxH) 9.8 Storage Case - it willHydraulic Power Pack for Lacer YM-D2S 35-68 ensure safe transport and storage of theCompact-Hydraulic Power Pack 41 304 44 12 Lacer YM-D2S. ItYM-D2S 400V/50Hz/3Phases 41 304 44 13 comes with a 41 304 44 14 hinged cover and 2Compact-Hydraulic Power Pack swivelling handles.YM-D2S 110V/60Hz/1Phase Measurements inside 470 x 248 x 348 mmCompact-Hydraulic Power Pack (LxWxH)YM-D2S 220V/60Hz/1Phase 27.7 34.8 34.4 Compact-Hydraulic Power Pack specially aligned for use with the Lacer YM-D2S 35-68. Dual-circuit Power Pack with 120/140 bar, available in different electrical types. Suitable for continuous use with Lacer YM-D2S 35-68.Transport and Storage Cases for ToolsStorage Case 1400 41 127 00 01 67.01700 x 440 x 490 mm (LxWxH) Solid metal sheet Storage Case, for safe transportation and storage of equipment. It comes with a hinged cover and 2 swivelling handles. Internal measurements 1700 x 440 x 490 mm (LxWxH)9 Product Catalogue 2015 9

Accessories I M2 c for Machine Installed Systems U30, S30S, E30 Skiver Blade S for Machine SkiverBelt Thickness Order No. kgMachine Skiver S 42 123 00 04 In order to reduce top layer thickness ofMachine Skiver S conveyor belts. To5-20 mm use with Frames S, SS, MF, and SP. Belt thickness range 6.9 5-20mm. Crank Drive.Skiver Blade S 42 123 00 06 0.1Machine Skiver HDMachine Skiver HD 42 124 00 04 6.9 In order to reduce top Skiver Blade HD for15-30 mm layer thickness of Machine Skiver conveyor belts. ToSkiver Blade HD 42 123 02 00 use with Frames S, SS, MF, and SP.Machine Skiver XTV-BS 42 124 00 07 Belt thickness range 42 124 00 10 15-30mm. CrankMachine Skiver XTV-BS Drive.7-31 mmMachine Skiver XTV 0.1Skiving on one side 7.1 In order to reduce top layer thickness of 6.9 conveyor belts. To use with Frames S, SS, Skiver Blade XTV for Skiver MF, and SP. Belt XTV-BS thickness range 7-31mm. Skiving on both sides at once only possible with Frame MF. Skiver Blade XTV can be adjusted to the skiving width, it enables cleaner friendly skiving. Crank Drive.Skiver Blade XTV 42 123 01 14 0.1Skiver Blade BS 42 123 01 12 0.1 10 Product Catalogue 2015 Skiver Blade BS for Skiver XTV-BS 10

Accessories I M2 c for Machine Installed Systems U30, S30S, E30 In order to minimize wave and bowingDescription Order No. kg when installing machine fastenersWave Master Systems WSS and OptimatWave Master Kit (Metal Box) V2 41 129 58 22 3.8(Clamping Unit with Quick ClampingDevice, 20 Tension Ropes with oneend,safety ferrule (2600 mm),Pincer and Distance Holder)WSS-Installation Unit 43 121 34 40 WSS-Installation Unit(PU= 10 pieces) 0.7 consists of Clamping Unit und Clamping PieceTension Ropes with one end 43 121 34 36 0.8safety ferrule (PU= 20 pieces) 43 121 34 56L=1800 mm Tension Ropes for 1.1 WSS-Installation UnitTension Ropes with one endsafety ferrule (PU= 20 pieces) In order to minimize waveL=2600 mm and bowing when installing machine fasteners with highOptimat Installation Unit 43 122 10 20 belt strengths(Measuring and Tensioning Block)Optimat Pincer 43 122 10 14 0.4 For cutting Optimat Tension RopesTension Ropes with two end 43 122 10 15safety ferrule 43 122 10 04 0.2Width 1000 43 122 10 05(PU = 2 pieces) 0.2Tension Ropes with two end Tension Ropes forsafety ferrule Optimat InstallationWidth 1200(PU = 2 pieces) 0.3 UnitTension Ropes with two endsafety ferrule Setting Gauge for allWidth 1400 types of Lacers and(PU = 2 pieces) Machine Skivers S and 0.3 HDSetting Gauge for Lacers and SkiversSetting Gauge 43 122 10 10for Lacers and Skivers11 Product Catalogue 2015 11

Additional AccessoriesDescription Order No. kg 46 000 07 60Mark and Cut Belt Marker permanently marks conveyor belts. Marking depth approx. 0.8 mm, width approx. 2.0 mmBelt Marker 0.1Belt Knife 42 123 00 00 0.1(incl. 5 Spare Blades) 1.1Installation Tools for Connecting PinsHammer Pin Driver 42 123 00 27 I M2 cfor Plain Connecting PinsInserting Tool 42 123 00 03 1.4 I M2 cfor Screw Connecting Pins 42 123 00 07 To install Screw Connecting PinsInsert Ratchet Ecofor Screw Connecting Pins 0.9 Inexpensive type for installing ScrewScrew Pin Inserting Tool SS2 42 123 03 00 Connecting Pins by ratchfor Screw Connecting Pins To install Screw Connecting Pins.Belt Skiving 42 160 10 20 Both-sided quick chuck for counter- clockwise and clockwise rotation.Power Tool (230V/50Hz) 42 160 10 12 3.3 Working pressure 4 - 6 barfor Skiving Blade fls e 42 160 10 13 42 160 10 14 I M2 cflsBlade e H30/60-22 mm Skiving Depth 1.8flsBlade e H30/60-33 mm Skiving Depth without skiver bladeflsBlade e H30/60-44 mm Skiving Depth 0.1 Blade for Power Tool, available in 3 different skving 0.1 depths: 2 mm, 3 mm, and 4 mm 0.112 Product Catalogue 2015 12

Selection Chart Connecting Pins for Plate FastenersMATO Connecting Pins are aligned in design and material composition to MATO Fasteners. Choosing theright Connecting Pin is important for reaching the optimum performance of the splice in your application. Selection Chart Connecting Pin Size Belt Thickness (mm) Belt Strength 5 6 7 8 9 10 11 12 13 14 15 16 17 18 >18* (kN/m) U35A, S35AS, E35A, H35AS, H35AE P1… P2… up to 1050 MR35A L1, P1E U35, S35BS, E35B, H35BS, P1. P2… U37A, S37AS, E37A, P2… P3… MR37A up to 1400 L2, P2E U37, S37BS, E37B, H37BS, P2. P3… S37CS, E37C P3… H67CS, H67CE up to P4… 1800 H67DS, H67DE P4…, P5E U38A, U68A P3… P4. up to U38, U68 4000 P4… * Thicker belts can be skived (covers) to fit. Selection Chart Connecting Pin Type Connecting Pin type High Belt Tension Trough No Trough Rust Resistance Chemical Resistance Abrasion Resistance (Life Time) Magnetism L... good good acceptable good poor acceptable highly P…E poor good magnetic P…S very good very good very good acceptable P…C magnetic P…K very good very good very good very good acceptable good magnetic L… - Design very good very good very good excellent very good very good slightly P… - Design magnetic excellent very good very good acceptable poor excellent magnetic High Tensile Galvanized Cable High Tensile Stainless Chromium-Nickel Cable P…E - Special Steel P…S - Stainless Chromium Steel P…C - Stainless Chromium-Nickel Steel P…K - High Wear Resistant Steel13 Product Catalogue 2015 13

Connecting Pins Plain Ends for Systems U68, U30, S30S, E30, H30Length Order No. kgConnecting Pins P1K 42 140 07 35 0.1 42 139 20 17 0.1Min. Diameter 5,3 mm 42 140 08 85 0.2 42 139 20 18 0.2 735 mm 42 140 10 35 0.2 785 mm 42 139 20 19 0.2 885 mm 42 140 13 35 0.2 985 mm 42 139 20 20 0.2 1035 mm 42 140 15 85 0.3 1185 mm 1335 mm 42 131 07 35 0.2 1385 mm 42 131 08 00 0.2 1585 mm 42 131 08 85 0.2 42 131 10 00 0.2Connecting Pins P2K 42 131 10 50 0.3 42 131 12 00 0.3Min. Diameter 6,4 mm 42 131 13 35 0.3 42 131 14 00 0.4 735 mm 42 131 15 85 0.4 785 mm 885 mm 42 139 07 35 0.2 High Tensile 985 mm 42 139 20 25 0.2 Stainless Chromium- 1035 mm 42 139 08 85 1185 mm 42 129 25 81 Nickel Steel 1335 mm 42 139 10 35 0.3 1385 mm 42 129 25 84 1585 mm 42 139 13 35 0.3 42 129 25 87Connecting Pins P3K 42 129 26 04 0.3 High WearMin. Diameter 7,1 mm 42 133 07 35 42 133 08 00 0.3 Resistant Steel 735 mm 42 133 08 85 0.4 785 mm 42 133 10 00 885 mm 42 133 10 35 0.4 985 mm 42 133 12 00 1035 mm 42 133 13 35 0.5 1185 mm 42 133 14 00 1335 mm 42 129 29 09 Highest wear resistance 1385 mm 0.3 1585 mm Excellent forConnecting Pins P4K 0.4 high belt tension 0.4Min. Diameter 8,9 mm very good for 735 mm 0.4 - trough / no trough 785 mm 0.5 885 mm 985 mm 0.5 1035 mm 1185 mm 0.6 1335 mm 1385 mm 0.6 1585 mm 0.7Installation Tools for Connecting Pins see page 12 14 14 Product Catalogue 2015

Connecting Pins With Threaded Ends for Systems U68, U30, S30S, E30, H30Length Order No. kgConnecting Pins P1KG 42 129 20 73 0.1 42 139 20 21 0.1Min. Diameter 5.3 mm 42 139 09 00 42 139 20 22 Recommended for 750 mm 42 139 10 50 0.2 Sealed Fasteners. 800 mm 42 139 20 23 0.2 Easy installation, 900 mm 42 139 13 50 1000 mm 42 139 20 24 Installation Tools 1050 mm 42 139 16 00 0.2 required (page 12) 1200 mm 0.2 1350 mm 42 132 07 50 0.2 1400 mm 42 132 08 00 0.2 1600 mm 42 132 09 00 0.3 42 132 10 00Connecting Pins P2KG 42 132 10 50 0.2 42 132 12 00 0.2Min. Diameter 6.4 mm 42 132 13 50 0.2 42 132 14 00 0.3 750 mm 42 132 16 00 0.3 800 mm 0.3 900 mm 42 129 25 38 0.3 1000 mm 42 139 20 26 0.4 1050 mm 42 129 25 39 0.4 1200 mm 42 129 25 82 1350 mm 42 129 26 05 0.2 1400 mm 42 129 25 85 High Tensile 1600 mm 42 129 26 06 42 129 25 88 0.2 StainlessConnecting Pins P3KG 42 129 26 03 0.3 Chromium-NickelMin. Diameter 7.1 mm 42 134 07 50 Steel 42 134 08 00 0.3 750 mm 42 134 09 00 800 mm 42 134 10 00 0.3 High Wear 900 mm 42 134 10 50 0.3 Resistant Steel 1000 mm 42 134 12 00 1050 mm 42 134 13 50 0.4 1200 mm 42 134 14 00 1350 mm 42 134 16 00 0.4 1400 mm 1600 mm 0.5Connecting Pins P4KG Highest wear resistanceMin. Diameter 8.9 mm 0.3 750 mm 0.4 Excellent for 800 mm high belt tension 900 mm 1000 mm 0.4 1050 mm very good for 1200 mm 1350 mm 0.4 - trough / no trough 1400 mm 1600 mm 0.5 0.5 0.6 0.6 0.7Installation Tools for Connecting Pins see page 12 15 15 Product Catalogue 2015

Connecting Pins Plain Ends for Systems U68, U30, S30S, E30, H30Length Order No. kgConnecting Pins P1C 42 127 01 59 0.1 42 127 01 35 0.1Min. Diameter 5.3 mm 42 127 00 32 0.2 42 127 01 30 0.2 735 mm 42 127 01 33 0.2 785 mm 42 127 01 34 0.2 885 mm 42 127 00 41 0.2 985 mm 42 127 00 37 0.2 1035 mm 42 127 00 38 0.3 1185 mm 1335 mm 42 128 00 16 0.2 1385 mm 42 128 00 13 0.2 1585 mm 42 128 00 06 0.2 42 128 09 86 0.3Connecting Pins P2C 42 128 00 04 0.3 42 128 00 02 0.3Min. Diameter 6.4 mm 42 128 00 08 0.3 42 128 00 12 0.4 735 mm 42 128 00 03 0.4 785 mm 885 mm 42 129 24 80 0.2 985 mm 42 129 24 92 0.2 High Tensile 1035 mm 42 129 24 81 1185 mm 42 129 24 99 Stainless Chromium- 1335 mm 42 129 24 82 0.3 Nickel Steel 1385 mm 42 129 27 42 0.3 1585 mm 42 129 24 83 42 129 24 93 0.3Connecting Pins P3C 42 129 24 95 Stainless Chromium-Min. Diameter 7.1 mm 42 129 25 92 0.3 Nickel Steel 42 129 25 96 0.4 735 mm 42 129 25 93 785 mm 42 129 25 48 0.4 885 mm 42 129 25 94 985 mm 42 129 25 49 0.5 1035 mm 42 129 25 67 1185 mm 42 129 25 97 Very high wear resistance 1335 mm 42 129 29 07 0.3 1385 mm 0.3 Highest level of corrosion resistance as 1585 mm well as chemical resistanceConnecting Pins P4C 0.4Min. Diameter 8.5 mm Very good for 0.4 - high belt tension 735 mm 0.4 - trough / no trough 785 mm 885 mm 0.5 slightly magnetic 985 mm 0.5 1035 mm 1185 mm 0.6 1335 mm 1385 mm 0.6 1585 mmInstallation Tools for Connecting Pins see page 12 16 16 Product Catalogue 2015

Connecting Pins With Threaded Ends for Systems U68, U30, S30S, E30, H30Length Order No. kgConnecting Pins P1CG 42 129 20 59 0.1 42 129 20 42 0.1Min. Diameter 5.3 mm 42 129 20 58 42 129 20 40 Recommended for 750 mm 42 129 20 32 0.2 Sealed Fasteners. 800 mm 42 129 20 41 0.2 Easy installation, 900 mm 42 129 20 60 1000 mm 42 129 20 43 Installation Tools 1050 mm 42 129 20 53 0.2 required (page 12) 1200 mm 0.2 1350 mm 42 128 21 16 0.2 1400 mm 42 128 21 04 0.2 1600 mm 42 129 21 10 0.3 42 128 21 03Connecting Pins P2CG 42 128 20 94 0.2 42 128 20 95 0.2Min. Diameter 6.4 mm 42 128 21 15 0.2 42 128 21 05 0.3 750 mm 42 128 21 12 0.3 800 mm 0.3 900 mm 42 129 24 01 0.3 1000 mm 42 129 25 52 0.4 1050 mm 42 129 24 02 0.4 1200 mm 42 129 25 50 1350 mm 42 129 24 03 0.2 High Tensile 1400 mm 42 129 25 51 0.2 Stainless Chromium- 1600 mm 42 129 24 04 42 129 25 53 Nickel CableConnecting Pins P3CG 42 129 25 74 0.3 0.3Min. Diameter 7.1 mm 42 129 24 05 0.3 42 129 27 43 0.3 Stainless 750 mm 42 129 24 06 800 mm 42 129 27 44 Chromium- 900 mm 42 129 24 07 0.4 Nickel Steel 1000 mm 42 129 27 45 0.4 1050 mm 42 129 24 08 0.5 1200 mm 42 129 27 46 1350 mm 42 129 27 61 Very high wear restistance 1400 mm 0.3 1600 mm highest level of corrosion resistance as wellConnecting Pins P4CG 0.3 as chemical resistance 0.4Min. Diameter 8.5 mm very good for 750 mm 0.4 - high belt tension 800 mm 0.4 - trough / no trough 900 mm 0.5 slightly magnetic 1000 mm 0.5 1050 mm 0.6 1200 mm 0.6 1350 mm 1400 mm 1600 mmInstallation Tools for Connecting Pins see page 12 17 17 Product Catalogue 2015

Connecting Pins Plain Ends for Systems U68, U30, S30S, E30, H30Length Order No. kgConnecting Pins P1S 42 127 01 14 0.1 42 127 01 22 0.1Min. Diameter 5.3 mm 42 127 01 25 0.2 42 127 01 20 0.2 735 mm 42 127 01 26 0.2 785 mm 42 127 01 21 0.2 885 mm 42 129 20 10 0.2 985 mm 42 127 01 23 0.2 1035 mm 42 127 15 85 0.3 1185 mm 1335 mm 42 128 07 50 0.2 1385 mm 42 128 07 85 0.2 1585 mm 42 128 08 85 0.2 42 128 09 85 0.2Connecting Pins P2S 42 128 10 35 0.3 42 128 11 85 0.3Min. Diameter 6.4 mm 42 128 13 35 0.3 42 128 13 85 0.4 735 mm 42 128 15 85 0.4 785 mm 885 mm 42 129 25 41 0.2 985 mm 42 129 25 01 High Tensile 1035 mm 42 129 25 15 1185 mm 42 129 25 02 0.2 Stainless 1335 mm 42 129 25 11 0.3 Chromium-Nickel 1385 mm 42 129 25 03 1585 mm 42 129 25 14 Cable 42 129 25 04 0.3Connecting Pins P3S 42 129 25 19 0.3 0.3 StainlessMin. Diameter 7.1 mm 42 129 26 01 0.4 Chromium Steel 42 129 27 01 0.4 735 mm 42 129 27 13 0.5 785 mm 42 129 27 02 885 mm 42 129 27 06 High corrosion resistance 985 mm 42 129 27 03 0.3 1035 mm 42 129 27 12 1185 mm 42 129 27 04 Very good for 1335 mm 42 129 27 09 0.3 - high belt tension 1385 mm 0.4 - trough / no trough 1585 mm 0.4 0.4Connecting Pins P4S 0.5 0.5Min. Diameter 8.5 mm 0.6 0.6 735 mm 785 mm 885 mm 985 mm 1035 mm 1185 mm 1335 mm 1385 mm 1585 mmInstallation Tools for Connecting Pins see page 12 18 18 Product Catalogue 2015

Connecting Pins With Threaded Ends for Systems U68, U30, S30S, E30, H30Length Order no. kgConnecting Pins P1SG 42 129 20 22 0.1 Recommended for 42 129 20 15 0.1 Sealed Fasteners.Min. Diameter 5.3 mm 42 129 20 19 0.2 Easy installation, 42 129 20 16 0.2 Installation Tools 750 mm 42 129 20 20 0.2 required (page 12) 800 mm 42 129 20 17 0.2 900 mm 42 129 13 50 0.2 1000 mm 42 129 20 18 0.2 1050 mm 42 129 20 25 0.3 1200 mm 1350 mm 42 128 20 90 0.2 1400 mm 42 128 20 82 0.2 1600 mm 42 128 20 83 0.2 42 128 20 79 0.3Connecting Pins P2SG 42 128 20 84 0.3 42 128 20 77 0.3Min. Diameter 6.4 mm 42 128 20 89 0.3 42 128 20 80 0.4 750 mm 42 128 20 81 0.4 800 mm 900 mm 42 129 25 66 0.2 High Tensile 1000 mm 42 129 25 23 0.2 Stainless 1050 mm 42 129 25 24 1200 mm 42 129 25 20 Chromium- 1350 mm 42 129 25 25 0.3 Nickel Cable 1400 mm 42 129 25 21 0.3 1600 mm 42 129 25 32 0.3 Stainless 42 129 25 22 0.3 Chromium SteelConnecting Pins P3SG 42 129 25 30 0.4 0.4Min. Diameter 7.1 mm 42 129 27 33 0.5 42 129 27 20 750 mm 42 129 27 22 High corrosion resistance 800 mm 42 129 27 16 0.3 900 mm 42 129 27 23 1000 mm 42 129 27 30 Very good for 1050 mm 42 129 27 47 0.3 - high belt tension 1200 mm 42 129 27 18 0.4 - trough / no trough 1350 mm 42 129 27 21 0.4 1400 mm 0.4 1600 mm 0.5 0.5Connecting Pins P4SG 0.6 0.6Min. Diameter 8.5 mm 750 mm 800 mm 900 mm 1000 mm 1050 mm 1200 mm 1350 mm 1400 mm 1600 mmInstallation Tools for Connecting Pins see page 12 19 19 Product Catalogue 2015

Hammer Installed Plate Fasteners I M2 c20 Product Catalogue 2015 20

Selection Chart Hammer Installed Plate FastenersThe Systems H30 and H60 are the strongest Hammer Systems. Belt ends with H30 / H60 areconnectable to belt-ends with U30 or S30S or E30. Its outstanding features are: Clearance fit of carbon steel staple Low compression into the beltif H30E/H60E or stainless steel staple Fastener fits to variations in belt thickness if H30S/H60S Wear Resistant Carbon Steel if H30E/H60E or Chromium Steel if H30S/H60S Staple Cold forged plate w.loopguarded by forged for highest strengths pocketThe MR30-System is a simple and easy to use Hammer System. In comparison to other Wide PlateFasteners, the MR30-System has a long life time and can be installed within a short time.Clearance fit of carbon Low compression into the steel staple belt Fastener fits to variations in belt thicknessStaple guarded by forged Plate made from pocket Galvanized Carbon Steel Belt Thickness (mm) Belt Strength Min. Drum Diameter5 6 7 8 9 10 11 12 13 14 15 16 17 18 >18* (kN/m)H35AS up to 1800 up to 1400 up to 1050 250 mmH35AEMR35A H35BS H35BE H37AS 350 mm H37AE MR37A H37BS H37BE H67CS 500 mm H67CE H67DS H67DEMaterials Plate / Staples:Cr (S)- / CrNi (SS) Steel Carbon Steel / Special Steel* Thicker belts can be skived (cover) to fit21 Product Catalogue 2015 21

Stainless Steel Fastener H30S and H60S I M2 c Hammer Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener H35AS - Standard 2.4 2.7Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 2.9 3.3up to 900 mm 6 - 9 mm 41 116 22 17 3.7up to 1000 mm 6 - 9 mm 41 116 22 18 3.9up to 1050 mm 6 - 9 mm 41 116 22 19 4.4up to 1200 mm 6 - 9 mm 41 116 22 30up to 1350 mm 6 - 9 mm 41 116 22 21 2.4up to 1400 mm 6 - 9 mm 41 116 22 22 2.7up to 1600 mm 6 - 9 mm 41 116 22 24 2.9 3.3Belt Fastener H35BS - Standard 3.8 3.9 -Low compression into the beltBelt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 4.4 -Stainless steel staplesup to 900 mm 7 - 11 mm 41 116 22 26 -Staple guardup to 1000 mm 7 - 11 mm 41 116 22 27 -Cold forged plate with loops for highest strengthsup to 1050 mm 7 - 11 mm 41 116 22 28 -High wear resistant plate material (chromium steel)up to 1200 mm 7 - 11 mm 41 116 20 30 2.9 -Fits to variations in belt thicknessup to 1350 mm 7 - 11 mm 41 116 18 30 3.3up to 1400 mm 7 - 11 mm 41 116 22 31 3.5up to 1600 mm 7 - 11 mm 41 116 22 33 3.9 4.5 Staple Material: Stainless SteelBelt Fastener H37AS - Standard 4.6 Plate Material: Stainless Chromium Steel 5.3Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Units: based on boxes with 2 Fastener Strips with length accordingup to 900 mm 8 - 12 mm 41 116 22 62 belt width, (can be shortened individually).Content is sufficient forup to 1000 mm 8 - 12 mm 41 116 22 63up to 1050 mm 8 - 12 mm 41 116 22 64 2.9 one complete lace. (without Connecting Pin)up to 1200 mm 8 - 12 mm 41 116 22 65 3.3up to 1350 mm 8 - 12 mm 41 116 22 66 3.5up to 1400 mm 8 - 12 mm 41 116 22 67 4.0up to 1600 mm 8 - 12 mm 41 116 22 69 4.5 4.7Belt Fastener H37BS - Standard 5.3Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm 4.5 5.0up to 900 mm 10 - 14 mm 41 116 22 71 5.3up to 1000 mm 10 - 14 mm 41 116 22 72 6.0up to 1050 mm 10 - 14 mm 41 116 22 73 6.7up to 1200 mm 10 - 14 mm 41 116 22 74 6.9up to 1350 mm 10 - 14 mm 41 116 22 75 7.9up to 1400 mm 10 - 14 mm 41 116 22 76up to 1600 mm 10 - 14 mm 41 116 22 78 4.5 5.0Belt Fastener H67CS - Standard 5.3 6.0Belt Strength up to 1800 kN/m Minimum Pulley Diameter 500 mm 6.7 -Low compression into the belt 6.9 -Stainless steel staplesup to 900 mm 12 - 16 mm 41 118 50 24 7.9 -Staple guardup to 1000 mm 12 - 16 mm 41 118 50 25up to 1050 mm 12 - 16 mm 41 118 50 26 -Cold forged plate with loops for highest strengthsup to 1200 mm 12 - 16 mm 41 118 50 16 -High wear resistant plate material (chromium steel)up to 1350 mm 12 - 16 mm 41 118 50 27 -Fits to variations in belt thicknessup to 1400 mm 12 - 16 mm 41 118 50 28up to 1600 mm 12 - 16 mm 41 118 50 29Belt Fastener H67DS - StandardBelt Strength up to 1800 kN/m Minimum Pulley Diameter 500 mmup to 900 mm 15 - 18 mm 41 118 50 30up to 1000 mm 15 - 18 mm 41 118 50 31up to 1050 mm 15 - 18 mm 41 118 50 32up to 1200 mm 15 - 18 mm 41 118 50 20up to 1350 mm 15 - 18 mm 41 118 50 33up to 1400 mm 15 - 18 mm 41 118 50 34up to 1600 mm 15 - 18 mm 41 118 50 35Connecting Pins and Accessories see pages 27 - 28 and page 12. Staple Material: Stainless Steel Plate Material: Stainless Chromium Steel 22 Product Catalogue 2015 Units: based on boxes with 2 Fastener Strips with length according belt width, (can be shortened individually).Content is sufficient for one complete lace. (without Connecting Pin) 22

Eco-Belt Fastener H30E and H60E I M2 c Hammer Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener H35AE - StandardBelt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mmup to 900 mm 6 - 9 mm 41 116 20 00 2.4up to 1000 mm 6 - 9 mm 41 116 20 01 2.7up to 1050 mm 6 - 9 mm 41 116 20 02 2.9up to 1200 mm 6 - 9 mm 41 116 20 03 3.3up to 1350 mm 6 - 9 mm 41 116 20 04 3.7up to 1400 mm 6 - 9 mm 41 116 20 05 3.9up to 1600 mm 6 - 9 mm 41 116 20 07 4.4Belt Fastener H35BE - StandardBelt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mmup to 900 mm 7 - 11 mm 41 116 20 09 2.4up to 1000 mm 7 - 11 mm 41 116 20 10up to 1050 mm 7 - 11 mm 41 116 20 11 2.7up to 1200 mm 7 - 11 mm 41 116 20 12up to 1350 mm 7 - 11 mm 41 116 20 13 2.9up to 1400 mm 7 - 11 mm 41 116 20 14up to 1600 mm 7 - 11 mm 41 116 20 16 3.3Belt Fastener H37AE - Standard 3.7Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm 3.9 -Low compression in the beltup to 900 mm 8 - 12 mm 41 116 21 45 4.4 -Staple guardup to 1000 mm 8 - 12 mm 41 116 21 46 -Cold forged plate with loops for highest strengthsup to 1050 mm 8 - 12 mm 41 116 21 47up to 1200 mm 8 - 12 mm 41 116 21 48 -Wear resistant plate material (Chromium Steel)up to 1350 mm 8 - 12 mm 41 116 21 49up to 1400 mm 8 - 12 mm 41 116 21 50 -High tensile special steel staplesup to 1600 mm 8 - 12 mm 41 116 21 52 2.9 -Fits to variations in belt thickness 3.3 3.5 3.9 Staple Material: Special Steel Plate Material: Carbon Steel 4.5 4.6Belt Fastener H37BE - Standard 5.3Belt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm Units: based on boxes with 2 Fastener Strips with length according belt width, (can be shortened individually).Content is sufficient for one complete lace. (without Connecting Pin)up to 900 mm 10 - 14 mm 41 116 21 54 2.9up to 1000 mm 10 - 14 mm 41 116 21 55up to 1050 mm 10 - 14 mm 41 116 21 56 3.3up to 1200 mm 10 - 14 mm 41 116 21 57up to 1350 mm 10 - 14 mm 41 116 21 58 3.5up to 1400 mm 10 - 14 mm 41 116 21 59up to 1600 mm 10 - 14 mm 41 116 21 61 3.9 4.5 4.6 5.3Belt Fastener H67CE - StandardBelt Strength up to 1800 kN/m Minimum Pulley Diameter 500 mmup to 900 mm 12 - 16 mm 41 118 49 80 4.5up to 1000 mm 12 - 16 mm 41 118 49 81 5.0up to 1050 mm 12 - 16 mm 41 118 49 82 5.3up to 1200 mm 12 - 16 mm 41 118 50 00 6.0up to 1350 mm 12 - 16 mm 41 118 49 83 6.7up to 1400 mm 12 - 16 mm 41 118 49 84 6.9up to 1600 mm 12 - 16 mm 41 118 49 85 7.9Belt Fastener H67DE - Standard 4.5 5.0Belt Strength up to 1800 kN/m Minimum Pulley Diameter 500 mm 5.3 6.0up to 900 mm 15 - 18 mm 41 118 49 86 6.7 -Low compression in the beltup to 1000 mm 15 - 18 mm 41 118 49 87 6.9 -Staple guardup to 1050 mm 15 - 18 mm 41 118 49 88 7.9 -Cold forged plate with loops for highest strengthsup to 1200 mm 15 - 18 mm 41 118 50 04up to 1350 mm 15 - 18 mm 41 118 49 89 -Wear resistant plate material (Chromium Steel)up to 1400 mm 15 - 18 mm 41 118 49 90 -High tensile special steel staplesup to 1600 mm 15 - 18 mm 41 118 49 91 -Fits to variations in belt thicknessConnecting Pins and Accessories see pages 27 - 28 and page 12. Staple Material: Special Steel Plate Material: Carbon Steel 23 Product Catalogue 2015 Units: based on boxes with 2 Fastener Strips with length according belt width, (can be shortened individually).Content is sufficient for one complete lace. (without Connecting Pin) 23

Installation Units and Accessories for Hammer Installed Systems H30 and H60Belt Width Order No. kgInstallation Unit HTA H30 - Aluminium Frame Standard equipment of all Installation Units includes a Hammer Frame and a Lacing Head. 400 mm 41 119 04 00 14.21000 mm 41 119 10 00 24.61200 mm 41 119 12 00 26.41400 mm 41 119 14 00 28.31600 mm 41 119 16 00 31.0Installation Unit HTA H60 - Aluminium Frame 400 mm 41 119 12 65 14.3 - Aluminium Frame1000 mm 41 119 12 66 24.7 - The Installation Units HTA H30 can be adjusted to the1200 mm 41 119 12 67 26.51400 mm 41 119 12 68 28.4 Fastener sizes H35A and H35 as well as H37A and H37.1600 mm 41 119 12 69 Simply turn the Comb Pins to the required Fastener size. - The Installation Units HTA H60 can be used for Fastener sizes H67CE and H67DE - The low weight of the Installation Unit allows easy handlingInstallation Unit HTS H37 - Steel Frame600 mm 41 119 06 02 16.6Installation Unit HTS H67 C/D - Steel Frame - Steel Frame. - The Installation Unit HTS H37 is used to install the Fastener sizes H37A and H37. - The Installation Unit HTS H67 C/D is used to install the Fastener sizes H67C and H67D.H67D.600 mm 41 119 06 05 16.6Hammer Ergonomic Hammer with Fiber Glass Shaft (2kg)Hammer HM 44 130 16 03 2.1Pneumatic HammerPneumatic Hammer 46 100 10 60 9.8Complete H30/H60Belt Skiver 41 129 58 50 0.8 Maximum Operating Pressure 41 129 58 51 0.1 6 bar.Belt Skiver 17/20 - H30/H60 For installing Fasteners H30 /Spare Blade Belt Skiver 17/20 H60, incl. Head.24 Product Catalogue 2015 24

Accessories for Hammer Installed Systems H30 and H60Belt Width Order No. kgLacing Head 41 117 01 00 3.6 Lacing Head for installing fasteners H30 / H60 manuallyLacing Head HK H30 by hammerLacing Head HK H60 41 117 01 67 3.9 I M2 cPneumatic HammerPneumatic Hammer H30/H60 46 000 10 00 6.9Head Complete for Pneumatic Hammer Maximum Operating Pressure 6 bar. For installing Fasteners H30 / H60.Pneumatic Hammer Head H30/H60 46 000 10 50 2.9 Delivery without Head.Punch for Pneumatic Hammer Pneumatic Hammer-Lacing Head For installing Fasteners H30 / H60.Punch for Pneumatic Hammer 46 000 10 70 0.6 Suitable for Pneumatic Hammer Nr.H30/H60 4.2 46 000 10 00. H30/H60. Suitable for all HammerHead Complete for Electric Hammer (SDS-MAX Take-Up) Frames H30 / H60Electric Hammer Head H30/H60 43 333 02 00 Electric Hammer-Lacing Head For installing Fasteners H30 / H60.Punch for Electric Hammer (SDS-MAX Take-Up) Suitable for all brands with SDS- MAX take-up. (Minimum of 12Punch 43 333 03 00 0.6 Joule necessary for installation!)for Electric Hammer H30/H60 2525 Product Catalogue 2015

Eco-Fastener MR30 Hammer Installed Plate FastenersBelt Width Belt Thickness Order No. kgBelt Fastener MR35A - Standard 3.0 3.2Belt Strength up to 1050 kN/m Minimum Pulley Diameter 250 mm 3.3 3.5up to 900 mm 5 - 10 mm 46 000 10 36 3.8 I M2 cup to 1000 mm 5 - 10 mm 46 000 10 37 3.9up to 1050 mm 5 - 10 mm 46 000 10 38up to 1200 mm 5 - 10 mm 46 000 10 39up to 1350 mm 5 - 10 mm 46 000 10 40up to 1400 mm 5 - 10 mm 46 000 10 41Belt Fastener MR37A - Standard -Low compression in the belt -Staple GuardBelt Strength up to 1400 kN/m Minimum Pulley Diameter 350 mm 3.2 -Wear resistant plate material (galvanized) -High tensile special steel staplesup to 900 mm 10 - 15 mm 46 000 10 44 3.5 -Fits to variations in belt thicknessup to 1000 mm 10 - 15 mm 46 000 10 45up to 1050 mm 10 - 15 mm 46 000 10 46 3.7up to 1200 mm 10 - 15 mm 46 000 10 47 4.2 Staple Material: Special Steelup to 1350 mm 10 - 15 mm 46 000 10 48up to 1400 mm 10 - 15 mm 46 000 10 49 Plate Material: Carbon Steel 4.7 4.9 Units: based on boxes with 2 Fastener Strips with length according belt width, (can be shortened individually).Content is sufficient for one complete lace. (without Connecting Pin) Installation Units and Accessories for Hammer Installed Systems MR30Belt Width Order No. kgInstallation Unit MRTA MR301000 mm 46 000 10 52 21.501200 mm 46 000 10 531400 mm 46 000 10 54 25.10 Standard equipment of Installation Units 28.70 (Aluminium Frame) includes a Hammer FrameHammer 46 000 00 78 and a Lacing Head.Hammer H3 (3kg) Hammer (3 kg) 3.60Lacing Head 46 000 10 56 Hammer-Lacing Head. For installing the 3.20 Fastener series MR30Lacing Head MRK MR30Head Complete for Electric Hammer (SDS-MAX Take-Up)Electric Hammer Head MR30 46 333 02 00 2.90 Electric Hammer-Lacing Head. 0.6 For installing Fasteners MR30.Punch for Electric Hammer (SDS-MAX Take-Up) Suitable for all brands with SDS- MAX Take-Up.Punch for Electric Hammer 46 333 03 00Head MR30 (Minimum of 12 Joule necessary for installation!)Conneting Pins and Accessories please see pages 12 and 27-29. 26 26 Product Catalogue 2015

Connecting Pins Plain Ends for Systems U68, U30, S30S, E30, H30Length Order No. kgConnecting Pins P1S 42 127 01 14 0.1 42 127 01 22 0.1Min. Diameter 5.3 mm 42 127 01 25 0.2 42 127 01 20 0.2 735 mm 42 127 01 26 0.2 785 mm 42 127 01 21 0.2 885 mm 42 129 20 10 0.2 985 mm 42 127 01 23 0.2 1035 mm 42 127 15 85 0.3 1185 mm 1335 mm 42 128 07 50 0.2 1385 mm 42 128 07 85 0.2 1585 mm 42 128 08 85 0.2 42 128 09 85 0.2Connecting Pins P2S 42 128 10 35 0.3 42 128 11 85 0.3Min. Diameter 6.4 mm 42 128 13 35 0.3 42 128 13 85 0.4 735 mm 42 128 15 85 0.4 785 mm 885 mm 42 129 25 41 0.2 High Tensile 985 mm 42 129 25 01 0.2 Stainless Chromium- 1035 mm 42 129 25 15 1185 mm 42 129 25 02 Nickel Cable 1335 mm 42 129 25 11 0.3 1385 mm 42 129 25 03 1585 mm 42 129 25 14 0.3 42 129 25 04 0.3 StainlessConnecting Pins P3S 42 129 25 19 Chromium SteelMin. Diameter 7.1 mm 42 129 26 01 0.3 42 129 27 01 735 mm 42 129 27 13 0.4 785 mm 42 129 27 02 885 mm 42 129 27 06 0.4 985 mm 42 129 27 03 1035 mm 42 129 27 12 0.5 1185 mm 42 129 27 04 1335 mm 42 129 27 09 High corrosion resistance 1385 mm 1585 mm 0.3Connecting Pins P4S 0.3 Very good for - high belt tensionMin. Diameter 8.5 mm 0.4 - trough / no trough 735 mm 785 mm 0.4 885 mm 985 mm 0.4 1035 mm 1185 mm 0.5 1335 mm 1385 mm 0.5 1585 mm 0.6 0.6Installation Tools for Connecting Pins please see page 12 27 27 Product Catalogue 2015

Connecting Pins Plain Ends for Systems E30, H30, H60, MR30Length Order No. kgConnecting Pins P1E 42 134 07 35 0.1 42 134 07 85 0.1Min. Diameter 5.3 mm 42 134 08 85 0.2 42 134 09 85 0.2 735 mm 42 134 10 35 0.2 785 mm 42 134 11 85 0.2 885 mm 42 134 13 35 0.2 985 mm 42 134 13 85 0.2 1035 mm 42 134 15 85 0.3 1185 mm 1335 mm 42 135 07 35 0.2 1385 mm 42 135 07 85 0.2 1585 mm 42 135 08 85 0.2 42 135 09 85 0.2Connecting Pins P2E 42 135 10 35 0.3 42 135 11 85 0.3Min. Diameter 6.4 mm 42 135 13 35 0.3 42 135 13 85 0.4 735 mm 42 135 15 85 0.4 785 mm 885 mm 42 136 07 35 0.2 985 mm 42 136 07 85 0.2 1035 mm 42 136 08 85 0.3 1185 mm 42 136 09 85 0.3 1335 mm 42 136 10 35 0.3 1385 mm 42 136 11 85 1585 mm 42 136 13 35 High Tensile 42 136 13 85 0.3 StainlessConnecting Pins P3E 42 136 15 85 0.4 Chromium- 0.4 Nickel CableMin. Diameter 7.1 mm 42 139 47 35 0.5 42 139 47 85 735 mm 42 139 48 85 Special Steel 785 mm 42 139 49 85 885 mm 42 139 40 35 0.3 985 mm 42 139 41 85 0.3 1035 mm 42 139 43 35 0.4 1185 mm 42 139 43 85 0.4 1335 mm 42 139 45 85 0.4 1385 mm 0.5 1585 mm 42 139 57 35 0.5 42 139 57 85 0.6Connecting Pins P4E 42 139 58 85 0.6 42 139 59 85Min. Diameter 8.5 mm 42 139 50 35 Very good for 42 139 51 85 0.5 - high belt tension 735 mm 42 139 53 35 0.6 - trough / no trough 785 mm 42 139 53 85 0.6 885 mm 42 139 55 85 0.7 985 mm 0.7 1035 mm 0.8 1185 mm 1.0 1335 mm 1.0 1385 mm 1.1 1585 mmConnecting Pins P5EMin. Diameter 10.5 mm 735 mm 785 mm 885 mm 985 mm 1035 mm 1185 mm 1335 mm 1385 mm 1585 mmInstallation Tools for Connecting Pins please see page 12 28 28 Product Catalogue 2015

Connecting Pins Plain Ends for Systems MR30Length Order No. kgConnecting Pins L1 42 126 07 35 0.1 42 126 07 85 0.1Min. Diameter 5.3 mm 42 126 08 85 0.1 42 126 09 85 0.1 735 mm 42 126 10 52 0.1 785 mm 42 126 11 85 0.2 885 mm 42 126 13 50 0.2 985 mm 42 126 13 85 0.2 1035 mm 42 126 15 85 0.2 1185 mm 1335 mm 42 125 13 10 0.1 1385 mm 42 129 12 01 0.1 1585 mm 42 125 09 00 0.1 42 125 09 85 0.2Connecting Pins L2 42 125 10 35 0.2 42 125 11 85 0.2Min. Diameter 5.6 mm 42 125 13 35 0.2 42 125 13 85 0.2 735 mm 42 125 15 85 0.3 785 mm 885 mm 42 129 15 86 0.2 985 mm 42 129 07 85 High Tensile 1035 mm 42 129 09 00 1185 mm 42 129 09 85 0.2 Galvanised 1335 mm 42 129 10 52 0.2 Cable 1385 mm 42 129 11 85 1585 mm 42 129 10 53 0.2 42 129 13 85Connecting Pins L3 42 129 15 85 0.3Min. Diameter 6.9 mm 0.3 735 mm 0.3 785 mm 885 mm 0.3 985 mm 1035 mm 0.4 Good for 1185 mm - high belt tension 1335 mm - trough 1385 mm 1585 mmInstallation Tools for Connecting Pins please see page 12 29 29 Product Catalogue 2015

Screw Installed Fasteners I M2 c30 Product Catalogue 2015 30

Standard Fastener MS I M2 c Screw Installed FastenersThe Screw System MS is used for belt splicing and rip repairs. It is easy to install.The Fastener guarantees good compression into the belt (vice like effect)Fastener MS 1 MS 140 MS 190 MS 1½ MS 2 MS 2¼ MS 2½ MS 3Belt Thickness mm 5-11 5-11 8-14 11-17 14-21 14-30 19-25 >24Belt Strength kN/m 300 400 630 500 800 1050 800 1050Min Pulley Ø mm 250 300 400 400 700 1000 1000 1000Description Width Order No. kgBelt Fastener MS - Box 46 100 60 10 1,4 46 100 60 53 1,8Content 25 units 46 100 60 54 2,0 46 100 60 30 2,5MS 1 750 mm 46 100 60 40 3,3MS 140 750 mm 46 000 11 72 4,6MS 190 750 mmMS 1½ 950 mmMS 2 1050 mmMS 2¼ 1050 mmBelt Fastener MS - BoxContent 10 unitsAnzahl 10MS 2½ 500 mm 46 100 60 60 2,7 46 000 13 54 Material Upper / Lower Plate:MS 3 500 mm 46 000 09 82 3,0 Special SteelBelt Fastener MS - Bucket 46 000 09 78 Steel Series Fastener for 46 000 09 79 general applicationContent 100 units 46 000 09 83 46 000 09 84 5,7MS 1 3000 mm 46 000 11 73 7,2MS 140 3000 mm 8,1MS 190 3000 mm 41 178 17 71 9,8MS 1½ 3800 mm 41 178 17 72 13,3MS 2 4200 mm 18,3MS 2¼ 4200 mm 13,5Belt Fastener MS - Bucket 15,0Content 50 unitsMS 2½ 2500 mmMS 3 2500 mm31 Product Catalogue 2015 31

Standard Fastener MS I M2 c Screw Installed FastenersDescription Width Order No. kgBelt Fastener MS H - BoxContent 25 unitsMS 1H 750 mm 46 100 62 48 1.4MS 140H 750 mm 46 100 62 51 1.8MS 190H 750 mm 46 100 62 52 2.0MS 1½H 950 mm 46 100 62 49 2.5MS 2H 1050 mm 46 100 62 50 3.3Belt Fastener MS H - BucketContent 100 unitsMS 1H 3000 mm 46 000 09 85 5.7 Material Upper Plate:MS 140H 3000 mm 46 000 09 80MS 190H 3000 mm 46 000 09 81 7.2 High Carbon SteelMS 1½H 3800 mm 46 000 09 86MS 2H 4200 mm 46 000 09 87 8.1 Material Lower Plate: Special Steel 9.8 13.3 Fastener with Upper Plate made of high carbon steel for higher wear resistanceBelt Fastener MS B - BoxContent 25 unitsMS 140B 750 mm 41 178 17 74 1.8MS 190B 750 mm 41 178 17 75 2.0MS 1½B 950 mm 41 178 17 76 2.5MS 2B 1050 mm 41 178 17 77 3.3Belt Fastener MS B - BucketContent 100 unitsMS 140B 3000 mm 41 178 17 78 7.2MS 190B 3000 mm 41 178 17 79MS 1½B 3800 mm 41 178 17 80 8.1 Material Upper / Lower Plate:MS 2B 4200 mm 46 101 09 87 9.8 High Carbon Steel 13.3 Fastener with Upper and Lower Plate made of high carbon steel for higher wear resistanceBelt Fastener MS S - BoxContent 25 unitsMS 140S 750 mm 41 178 17 82 1.8MS 190S 750 mm 41 178 17 83 2.0MS 1½S 950 mm 46 100 60 55 2.5MS 2S 1050 mm 46 100 60 56 3.3 Material Upper / Lower Plate: Stainless Chromium-Nickel Steel Stainless Chromium-Nickel Steel Fastener for higher corrosion resistance32 Product Catalogue 2015 32

Repair Fastener S80 I M2 c Hammer Installed FastenersDescription Belt Thickness Order No. kg 0.2Belt Fastener S82Side Length 8 mm, Fastener Width 12 mmS82 (200) up to 4 mm 42 701 20 00Belt Fastener S83Side Length 10 mm, Fastener Width 14 mmS83 (201) up to 6 mm 42 701 20 10 0.2Belt Fastener S84Side Length 12 mm, Fastener Width 17 mmS84 (202) up to 8 mm 42 701 20 20 0.5Belt Fastener S85Side Length 16 mm, Fastener Width 23 mmS85 (203) up to 10 mm 42 701 20 30 0.9 - Fastener Installation without lacing toolBelt Fastener S86 - For rip repairsSide Length 20 mm, Fastener Width 25 mm Material: 1.5 Special SteelS86 (204) up to 13 mm 42 701 20 40 Packing units:Belt Fastener S87 100 pieces per packSide Length 23 mm, Fastener Width 30 mm 2.4S87 (205) up to 15 mm 42 701 20 50Belt Fastener S88Side Length 29 mm, Fastener Width 35 mmS88 (206) up to 18 mm 42 701 20 60 4.0 6.6Belt Fastener S89Side Length 38 mm, Fastener Width 43 mmS89 (207) up to 21 mm 42 701 20 7033 Product Catalogue 2015 33

Installation Tools MS I M2 c for Screw Installed FastenersDescription Order No. kgBelt Punch 46 100 67 23 0.1 46 100 67 24 0.1SL 1 - 140 - 190 46 100 67 25 0.2SL 1½ - 2 - 2¼SL 2½ - 3 46 100 67 29 0.1 46 100 67 30 0.1Power Punch 46 100 67 31 0.1ML 1 - 140 - 190 46 100 67 26 0.2ML 1½ - 2 - 2¼ 46 100 67 27 0.2ML 2½ - 3 46 100 67 28 0.3Hand Nut Tightener 46 100 66 05 0.1 46 100 66 10 0.1HS 1 - 140 - 190 46 100 66 15 0.1HS 1½ - 2 - 2¼HS 2½ - 3 46 100 67 32 0.1 46 100 67 33 0.1Brace Nut Tightener 46 100 67 34 0.1HB 1 - 140 - 190 46 100 67 20 0.4HB 1½ - 2 - 2¼ 46 100 67 21 0.7HB 2½ - 3 46 100 67 22 1.2Power Nut Tightener 46 100 67 42 0.2MB 1 - 140 - 190MB 1½ - 2 - 2¼MB 2½ - 3Bolt BreakerSB 1 - 140 - 190SB 1½ - 2 - 2¼SB 2 ½ - 3Quick Change ChuckSK 1 - 3Additional accessories are available upon request 34 34 Product Catalogue 2015

Templates MS I M2 c for screw installed Fasteners Template for punching andDescription Width Order No. kg keeping the correct pitchTemplates for MS 1 35LL-MS 1-600 600 mm 46 100 63 02 1.0LL-MS 1-750 750 mm 46 100 63 30 1.2LL-MS 1-900 900 mm 46 100 63 23 1.4LL-MS 1-1050 1050 mm 46 100 61 25 1.6LL-MS 1-1200 1200 mm 46 100 63 09 1.8Templates for MS 140LL-MS 140-600 600 mm 46 100 63 00 1.0LL-MS 140-750 750 mm 46 100 63 28 1.2LL-MS 140-900 900 mm 46 100 63 21 1.4LL-MS 140-1050 1050 mm 46 100 62 60 1.6LL-MS 140-1200 1200 mm 46 100 63 07 1.8Templates for MS 190LL-MS 190-600 600 mm 46 100 63 01 0.9LL-MS 190-750 750 mm 46 100 63 29 1.3LL-MS 190-900 900 mm 46 100 63 22 1.6LL-MS 190-1050 1050 mm 46 100 62 61 1.9LL-MS 190-1200 1200 mm 46 100 63 08 2.2LL-MS 190-1500 1500 mm 46 100 63 35 2.9Templates for MS 1½LL-MS 1½-600 600 mm 46 100 63 04 0.9LL-MS 1½-750 750 mm 46 100 63 32 1.1LL-MS 1½-900 900 mm 46 100 63 25 1.4LL-MS 1½-1050 1050 mm 46 100 62 62 1.6LL-MS 1½-1200 1200 mm 46 100 63 11 1.8LL-MS 1½-1500 1500 mm 46 100 63 37 2.3Templates for MS 2LL-MS 2-600 600 mm 46 100 63 05 1.1LL-MS 2-750 750 mm 46 100 63 33 1.4LL-MS 2-900 900 mm 46 100 63 26 1.6LL-MS 2-1050 1050 mm 46 100 63 38 1.9LL-MS 2-1200 1200 mm 46 100 63 12 1.9LL-MS 2-1500 1500 mm 46 100 63 39 2.8Templates for MS 2¼LL-MS 2¼-600 600 mm 46 100 67 36 1.3LL-MS 2¼-750 750 mm 46 100 67 37 1.7LL-MS 2¼-900 900 mm 46 100 67 38 2.1LL-MS 2¼-1050 1050 mm 46 100 67 39 2.4LL-MS 2¼-1200 1200 mm 46 100 67 40 2.8LL-MS 2¼-1500 1500 mm 46 100 67 41 3.6Templates for MS 2½LL-MS 2½-600 600 mm 46 100 63 42 1.6LL-MS 2½-750 750 mm 46 100 63 43 2.0LL-MS 2½-900 900 mm 46 100 63 44 2.4LL-MS 2½-1050 1050 mm 46 100 63 40 2.8LL-MS 2½-1200 1200 mm 46 100 63 13 3.2LL-MS 2½-1500 1500 mm 46 100 63 41 4.0Templates for MS 3LL-MS 3-900 900 mm 46 100 63 45 2.4LL-MS 3-1050 1050 mm 46 100 63 46 2.8LL-MS 3-1200 1200 mm 46 100 63 47 3.2LL-MS 3-1500 1500 mm 46 100 63 48 4.0Additional accessories are available upon request 35 Product Catalogue 2015

Accessories I M2 c36 Product Catalogue 2015 36

Safety Accessories I M2 c for Heavy Duty Textile Conveyor Belts PU = 2 pieces (One for each belt end)Description Admissible Belt Width Order No. kgBelt Clamp S - Admissible Working Load 60 kN, Belt Thickness 5 - 35 mmBelt Clamp S 60kN 920 ÷ 1000 41 126 13 92 116.8(Nominal Width 1000 mm)Belt Clamp S 60kN 1140 ÷ 1220 41 126 13 94 128.0(Nominal Width: 1200 mm)Belt Clamp S 60kN 1320 ÷ 1400 41 126 13 96 137.2(Nominal Width: 1400 mm)Belt Clamp S - Admissible Working Load 30 kN, Belt Thickness 5 - 30 mm Safety is MATO's top priority; therefore, our Belt Clamps are subject to high inspection requirements (e.g. 2-times nominal load). They are load handling devices, theyBelt Clamp S 30kN 920 ÷ 1000 41 125 12 04 63.0 tension and relieve the conveyor belt, and they are applied in pairs.(Nominal Width: 1000 mm) While in service, they form a secure working area with a relieved conveyor belt. They come in 2 nominal strengths 30 kN and 60 kNBelt Clamp S 30kN 1140 ÷ 1220 41 125 12 15 73.6 Further sizes are available upon request(Nominal Width: 1200 mm)Belt Clamp S 30kN 1320 ÷ 1400 41 125 12 31 79.8(Nominal Width: 1400 mm) Other Accessories I M2 cBelt Width Order No. Price in € kgT-Square for all Belt Thicknessesup to 1000 mm 41 122 00 00 4.4up to 1200 mm 41 122 00 10up to 1400 mm 41 122 00 20 5.0up to 1600 mm 41 122 00 30 5.6 T-Square (90°) with Blade Guide - concipated for cutting to 7.0 square conveyor belts with a knife.Mark and Cut Belt Marker permanently marks conveyor belts. Marking depth approx. 0,8 mm, width approx. 2,0 mmBelt Marker 46 000 07 60 0.03Belt Knife 42 123 00 00 0.10(incl. 5 Spare Blades)37 Product Catalogue 2015 Price recommendation without obligation, ex works, without VAT 37

Other Accessories I M2 cDescription Order No. kgRotary Belt Cutter ECO - without gear for Belt Thicknesses up to 15 mmup to 900 mm 41 000 10 64 18.7up to 1200 mm 41 000 10 67up to 1500 mm 41 000 10 69 22.4 For a perfect symmetric cut in textile conveyor belts up toup to 1800 mm 41 000 10 70 15 mm thickness. Drive through hexagon SW 19 26.1 29.8Handle Assembly (for Rotary Belt Cutter) 46 000 1068 1.1 Handle Assembly - Handle Assembly - 41 000 10 71 ECO suitable for all Standard suitable forHandle Assembly ECO 46 000 1066 Rotary Belt Cutters all Rotary Belt Cutters(for Rotary Belt Cutter) 2.2 T-Square suitable for all Rotary Belt CuttersT-Square (for Rotary Belt Cutter)Rotary Belt Cutter T - without gear for Belt Thicknesses up to 15 mmup to 900 mm 41 000 10 61 18.7up to 1200 mm 41 000 10 63up to 1500 mm 41 000 10 65 22.4up to 1800 mm 41 000 10 72 26.1 For a perfect symmetric cut in textile conveyor belts up to 15 mm thickness. Usable from both sides. Drive Handle* 29.8 is removable.Rotary Belt Cutter TMG - with gear for Belt Thicknesses up to 25 mmup to 900 mm 41 000 13 28 22.4up to 1200 mm 41 000 13 32up to 1500 mm 41 000 13 60 26.1up to 1800 mm 41 000 13 72 For a perfect symmetric cut in textile conveyor belts up to 29.8 25 mm thickness. Usable from both sides. It comes with a gear for lesser effort. Drive Handle* is removable. 33.5HD Belt Cutter - Belt Thickness 15 - 35 mmup to 1200 mm 42 123 00 37 45.1up to 1400 mm 42 123 00 38up to 1600 mm 42 123 00 32 47.0up to 1800 mm 42 123 01 00 50.9 For a perfect symmetric cut in textile conveyor belts from 15 - 35 mm thickness. Usable from both sides. designed 54.8 especially for high tensile belts.Spare Blades for Belt Cutter 46 000 10 67 0.1Spare Blade TMG + HDSpare Blade T 41 000 20 00 0.1 Spare Blade for* included in delivery Product Catalogue 2015 Spare Blade for Belt Cutter TMG + HD 38 Belt Cutter 38 ECO + T

Order Number IndexOrder No. P. Order No. P. Order No. P. Order No. P. Order No. P. Order No. P. Order No. P. Order No. P.410001061 38 411141527 5 411270001 9 421270121 18.27 421292401 17 421292742 16 421391335 14 460001000 25410001063 38 411141547 5 411294002 8 421270122 18.27 421292402 17 421292743 17 421391350 15 460001036 26… 411141554 5 411294030 8 421270123 18.27 421292403 17 421292744 17 421391600 15 …… … …… …410001072 38 411141555 5 411294301 7 421270125 18.27 421292404 17 421292745 17 421392017 14 460001049 26410001328 38 411141556 5 411294401 7 421270126 18.27 421292405 17 421292746 17 421392018 14 460001050 25410001332 38 411141559 5 411294405 4.7 421270130 16 421292406 17 421292747 19 421392019 14 460001052 26410001360 38 411141748 6 411294407 4.7 421270133 16 421292407 17 421292761 17 421392020 14 460001053 26410001372 38 411141749 6 411294408 4.7 421270134 16 421292408 17 421292907 16 421392021 15 460001054 26410002000 38 411141782 5 411294409 7 421270135 16 421292480 16 421292909 14 421392022 15 460001056 26411140012 5 411149201 7 411294601 7 421270159 16 421292481 16 421310735 14 421392023 15 460001066 38411140015 5 411149202 7 411294701 7 421271585 18.27 421292482 16 421310800 14 421392024 15 460001067 38411140018 5 411149203 7 411295320 8 421280002 16 421292483 16 421310885 14 421392025 14 460001068 38411140021 5 411149204 7 411295420 8 421280003 16 421292492 16 421311000 14 421392026 15 460001070 25411140022 5 411149205 7 411295620 8 421280004 16 421292493 16 421311050 14 421394035 28 460001172 31411140024 5 411161830 22 411295822 11 421280006 16 421292495 16 421311200 14 421394185 28 460001173 31411140708 5 411162000 23 411295850 24 421280008 16 421292499 16 421311335 14 421394335 28 460001354 31411140709 5 411295851 24 421280012 16 421292501 18.27 421311400 14 421394385 28 461001060 24411140710 5 411162016 23 411304012 4 421280013 16 421292502 18.27 421311585 14 421394585 28 461006010 31411140712 5 411162030 22 411681444 4 421280016 16 421292503 18.27 421320750 15 421394735 28 461006030 31411140716 5 411162145 23 411681445 4 421280750 18.27 421292504 18.27 421320800 15 421394785 28 461006040 31411140717 5 411162146 23 411681446 4 421280785 18.27 421292511 18.27 421320900 15 421394885 28 461006053 31411140718 5 411162147 23 411681500 4 421280885 18.27 421292514 18.27 421321000 15 421394985 28 461006054 31411140735 5 411162148 23 411681512 4 421280985 18.27 421292515 18.27 421321050 15 421395035 28 461006055 32411140738 7 411162149 23 411681514 4 421280986 16 421292519 18.27 421321200 15 421395185 28 461006056 32411140739 7 411162150 23 411781771 31 421281035 18.27 421292520 19 421321350 15 421395335 28 461006060 31411140740 7 411162152 23 411781772 31 421281185 18.27 421292521 19 421321400 15 421395385 28 461006125 35411140741 7 411162154 23 411781774 32 421281335 18.27 421292522 19 421321600 15 421395585 28 461006248 32411140742 6 23 421281385 18.27 421292523 19 421330735 14 421395735 28 461006249 32411140743 6 411162161 23 411781780 32 421281585 18.27 421292524 19 421330800 14 421395785 28 461006250 32411140744 6 411162217 22 411781782 32 421282077 19 421292525 19 421330885 14 421395885 28 461006251 32411140745 6 411162218 22 411781783 32 421282079 19 421292530 19 421331000 14 421395985 28 461006252 32411140746 6 411162219 22 413044400 4.8 421282080 19 421292532 19 421331035 14 421400735 14 461006260 35411140747 6 411162221 22 413044401 9 421282081 19 421292538 15 421331200 14 421400885 14 461006261 35411140748 6 411162222 22 413044412 9 421282082 19 421292539 15 421331335 14 421401035 14 461006262 35411140749 7 411162224 22 413044413 9 421282083 19 421292541 18.27 421331400 14 421401335 14 461006300 35411140750 6 411162226 22 413044414 9 421282084 19 421292548 16 421340735 28 421401585 14 461006301 35411140751 7 411162227 22 421230000 12.37 421282089 19 421292549 16 421340750 15 421601012 12 461006302 35411140754 7 411162228 22 421230003 12 421282090 19 421292550 17 421340785 28 421601013 12 461006304 35411140756 6 411162230 22 421230004 10 421282094 17 421292551 17 421340800 15 421601014 12 461006305 35411140757 6 411162231 22 421230006 10 421282095 17 421292552 17 421340885 28 421601020 12 461006307 35411140758 6 411162233 22 421230007 12 421282103 17 421292553 17 421340900 15 421602001 4.8 461006308 35411140759 7 411162262 22 421230112 10 421282104 17 421292566 19 421340985 28 421602002 4.8 461006309 35411140761 6 ……… 421230114 10 421282105 17 421292567 16 421341000 15 421602003 4.8 461006311 35411140762 6 411162278 22 421230027 12 421282112 17 421292574 17 421341035 28 427012000 33 461006312 35411140763 6 411170100 25 421230032 38 421282115 17 421292581 14 421341050 15 427012010 33 461006313 35411140764 6 411170167 25 421230037 38 421282116 17 421292582 15 421341185 28 427012020 33 461006321 35411140766 6 411184980 23 421230038 38 421290785 29 421292584 14 421341200 15 427012030 33411140767 6 421230100 38 421290900 29 421292585 15 421341335 28 427012040 33 461006348 35411140768 6 411184991 23 421230200 10 421290985 29 421292587 14 421341350 15 427012050 33 461006605 34411140769 6 411185016 22 421230300 12 421291052 29 421292588 15 421341385 28 427012060 33 461006610 34411140770 6 411185020 22 421240004 10 421291053 29 421292592 16 421341400 15 427012070 33 461006615 34411140773 6 411185024 22 421240007 4.10 421291185 29 421292593 16 421341585 28 431213436 11 461006720 34411140774 6 421240010 4.10 421291350 19 421292594 16 421341600 15 431213440 11411140775 6 411185035 22 421250900 29 421291385 29 421292596 16 421350735 28 431213456 11 461006734 34411140776 7 411185000 23 421250985 29 421291585 29 421292597 16 421350785 28 431221004 11 461006736 35411140777 7 411185004 23 421251035 29 421291586 29 421292601 18.27 421350885 28 431221005 11 461006737 35411140780 6 411190400 24 421251185 29 421292010 18.27 421292603 15 421350985 28 431221010 11 461006738 35411140781 6 411190602 24 421251310 29 421292015 19 421292604 14 421351035 28 431221014 11 461006739 35411140783 6 411190603 24 421251335 29 421292016 19 421292605 15 421351185 28 431221015 11 461006740 35411140784 6 411191000 24 421251385 29 421292017 19 421292606 15 421351335 28 431221020 11 461006741 35411140785 6 411191200 24 421251585 29 421292018 19 421292701 18.27 421351385 28 433330200 25 461006742 34411140812 5 411191265 24 421260735 29 421292019 19 421292702 18.27 421351585 28 433330300 25 461010987 32411140816 5 … 421260785 29 421292020 19 421292703 18.27 421360735 28 441301550 37 463330200 26411141414 5 411191269 24 421260885 29 421292022 19 421292704 18.27 421360785 28 441301603 24 463330300 26411141415 5 411191400 24 421260985 29 421292025 19 421292706 18.27 421360885 28 460000078 26411141416 5 411191600 24 421261052 29 421292032 17 421292709 18.27 421360985 28 460000760 12.37411141418 5 411220000 37 421261185 29 421292040 17 421292712 18.27 421361035 28 460000978 31411141419 5 411220010 37 421261350 29 421292041 17 421292713 18.27 421361185 28 460000979 31411141422 5 411220020 37 421261385 29 421292042 17 421292716 19 421361335 28 460000980 32411141423 5 411220030 37 421261585 29 421292043 17 421292718 19 421361385 28 460000981 32411141429 5 411251204 37 421270032 16 421292053 17 421292720 19 421361585 28 460000982 31411141430 5 411251215 37 421270037 16 421292058 17 421292721 19 421390735 14 460000983 31411141431 5 411251231 37 421270038 16 421292059 17 421292722 19 421390885 14 460000984 31411141495 5 411261392 37 421270041 16 421292060 17 421292723 19 421390900 15 460000985 32411141521 5 411261394 37 421270114 18.27 421292073 15 421292730 19 421391035 14 460000986 32411141522 5 411261396 37 421270120 18.27 421292110 17 421292733 19 421391050 15 460000987 3239 39

General Conditions of Sales, Supply and PaymentI. QuotationThe documentation pertaining to the quotation such as illustrations, drawings, details of weights and dimensions are only approximately authoritative where they are notexpressly designated as binding. The supplier retains the right to ownership and Copyright of all cost estimates, drawings and other papers. These must not be madeaccessible to third parties The supplier has an obligation not to make accessible to third parties any plans designated as confidential by the purchaser, without the latter'sapprovaII. Scope of the deliveryThe written order confirmation from the supplier is definitive for the scope of the delivery. In the case of a quotation from the supplier with a time commitment and timelyacceptance, the quotation is definitive, where there is no confirmation of the Order in good time. Supplementary agreements and changes require the written confirmationof the supplier.III. Price and payment1. In the absence of any special agreements the prices are ex works, including loading at the factory, but excluding packing. VAT at the applicable statutory rate must beadded to the prices.2. In the absence of any special agreement payment is to be made in cash with no deductions and free of charge at the supplier's point of payment within 30 days afterdispatch. We grant a discount of 2% if the payment is carried out within 14 days after dispatch.3. The withholding of payments or the offsetting of any counter claims by the purchaser which are disputed by supplier are not permitted.4. For orders of less than EUR 50,- nett invoice value we charge a handling charge of additional EUR 15,- for each order.5. In case of disproportional increases of costs such as labour or material costs we preserve the right for price adaptations even within the period of validity of this pricelist.IV. Delivery time1. The delivery time begins with the sending of the order confirmation but not before the purchaser furnishes the documents, approvals, clearances to be provided andalso the arrival of the agreed down payment.2. The delivery times will be extended commensurately in the event of actions which form part of labour disputes, especially strikes and lockouts and also in the event ofany unforeseen impediments which are outside the control of the supplier where such impediments can be shown to have a considerable influence of the manufacture orshipment of the object being supplied. This also applies when these circumstances occur at sub-suppliers. The circumstances described are also not to be blamed by thesupplier when they arise during an already existing delay. In important cases the supplier will notify the purchaser of the beginning and end of such impediments as soonas possible.3. The delivery times has been adhered to if by the time it expires the object being supplied has left the factory or its readiness for despatch has been notified.4. When damage is suffered by the purchaser as a result of delay which has occurred due to the supplier, the purchaser is entitled to request compensation for the delay,to the exclusion of further claims. For each full week of lateness this will amount to 1/2 of 1%, but at the most 5% of the value of that part of the total delivery which as aresult of the delay cannot be utilised in good time or in accordance with the contract.5. If despatch is delayed at the wish of the purchaser he will be charged for the cost of storage beginning one month after indication of readiness for despatch, for storageat the supplier's factory however at least 1/2 of 1% of the invoiced amount for each month. The supplier however is entitled after setting a suitable period and its fruitlessexpiry to make other use of the object being supplied and to supply the purchaser over a suitable extended period.6. Adherence to the delivery period assumes the purchaser meets his contractual obligations.V. Transfer of risk and acceptance1. The risk is transferred to the purchaser at the latest upon despatch of the supplied parts, i.e. even if partial deliveries are made or the supplier has taken on furtherservices such as the costsof despatch or transport and setting up. At the request of the purchaser, and at his expense, the shipment can be insured against theft, breakage, transport, fire and waterdamage and other insurable risks.2. If the despatch is delayed as a result of circumstances which are the fault of the purchaser, then the risk Is transferred to the purchaser from the day of readiness fordespatch; the supplier is however under an obligation, at the wish and expense of the purchaser, to effect insurance which the latter request.3. Objects supplied, even if they exhibit insignificant defects, are to be accepted by the purchaser regardless of the rights under section VII.4. Partial deliveries are permissible.VI. Right of ownership1. The supplier retains the right of ownership to objects supplied until the arrival of all payments under the contract to supply.2. The supplier is entitled to insure the object supplied against theft, breakage, transport, fire and water damage and other damage at the purchaser's expense when thepurchaser has not shown that he has taken out hat insurance himself.For defects in the delivery, which includes the absence of the properties explicitly promised, the supplier has the following obligations, to the exclusion of further claimsregardless of section IX, 4.VII. Liability for defects in the delivery1. All parts which within six month of commissioning prove to be unusable or whose usability is significantly impaired as a result of a state of affairs which was presentbefore the transfer of risk, particularly due to faulty construction, poor material or bad workmanship will be repaired or supplied new at the choice of the supplier, as hejudges best.The discovery of such defects is to be reported to the supplier in writing without delay. Replaced parts become the property of the supplier. If despatch, set up orcommissioning is delayed, without blame being attached to the supplier then this liability expires at the latest 12 month after the transfer of risk. For essential third partyproducts the supplier's liability is limited to the transfer of the entitlement to liability which exists vis a vis the sup-supplier of the third party product.2. The right of the purchaser to assert claims due to defects expires in all cases in 6 months from the time of the punctually made complaint, or upon the expiry of thewarranty period.3. No warranty is taken on for damage which occurs due to the following reasons; unsuitable or improper use, incorrect fitting or incorrect repair by the purchaser of by athird party, natural wear and tear, incorrect or negligent treatment, unsuitable operating materials, replacement materials defective construction work, unsuitableconstruction site, chemical, electro-chemical or electrical effects for which the blame cannot be attributed to the supplier.4. To allow the repairs and the supply of replacements to be carried out, which appear necessary in the best judgment of the supplier the purchaser, after agreement withthe supplier, must provide the necessary time and opportunity otherwise the supplier is released from his obligation for the defect. Only in urgent cases where operationalsafety is a risk or to avoid disproportionately large damage, whereupon the supplier must be made aware immediately, or if the supplier is delayed in eliminating thedefect, the purchaser has the right to eliminate the defect himself or have it eliminated by a third party and to demand reimbursement of the necessary costs from thesupplier.5. Of the direct costs in cured by the repairs of the supply of replacements the supplier will - insofar as the complaint is shown to be justified- bear the cost of thereplacement items including the despatch, plus the reasonable costs for the removal and fitting and furthermore, where this can be rightly requested depending on thesituation of the individual case, any necessary costs for providing his mechanics and assistants. The purchaser generally bears all other cost.40 Product Catalogue 2015 40

General Conditions of Sales, Supply and Payment6. The warranty period on the replacement items and the repair is three months, but this will run until the time of the expiry of the original warranty period for the objectsupplied. If repairs are necessary the period of liability for the object supplied will be extended by the length of the interruption in operation caused by this.7. Any modifications or repair work carried out on the part of the purchaser or a third party either inexpertly or without the prior approval of the supplier will cancel theliability for the consequences such actions.8. Further claims by the purchaser, especially claims for damage which did not occur on the supplied object itself are excluded. The exclusion of liability does not apply ifthe owner or leading the owner or leading employee, the supplier is only liable for sensibly foreseeable damage typical of the contract. The exclusion of liability also doesnot apply in cases where in accordance with the product liability law liability is accepted for damage to persons or property on privately used objects, where faults exist onthe object supplied. It also does not apply when properties.VIII. Liability for associated obligationWhen, through the fault of the supplier, the object supplied cannot be used by the purchaser in accordance with the contract as a result of omitted or incorrectimplementation of suggestions or advice which occurred before or after conclusion of the contract and also other obligations related to the contract, especially instructionsfor the operation and maintenance of the object supplied then the rulings in Section VII and IX apply appropriately, to the exclusion of further claims by the purchaser.IX. The rights of the purchaser to withdrawal, variation and other liability of the supplier1. The purchaser can also withdraw from the contract is the whole provision of supplies and/or services becomes completely impossible for the supplier before thetransfer of risk. The same applies in the event of the supplier’s inability to deliver. The purchaser can also withdraw from the contract, for an order of objects of the sametype, the implementation of a part of the delivery becomes impossible with respect to quantity or he has a justified interest in refusing a partial delivery, if this is not thecase the purchaser can reduce the counter payment to suit.2. If a delivery delay exists as defined under Section IV of the Conditions of Supply and if the purchaser grants the supplier who is in arrears with the delivery a suitableextension period with an explicit declaration that after the expiry of this period he will refuse to accept the goods and/or services, and it this extended deadline is not met,then the purchaser is entitled to withdraw.3. If the impossibility occurs during the delay in acceptance or due to the fault of the purchaser then the purchaser remains obliged to make the counter payment.4. The purchaser also has the right to cancellation of the contract if the supplier, through his own fault, allows a suitable extension period granted to him for repairs of thesupply of replacements with regard to a defect, as defined in the conditions of supply and attributable to him, to expire fruitlessly. The right of the purchaser to cancellationof the contract also exists in other cases of failure of the supplier to repair or supply a replacement.5. Further claims by the purchaser are excluded, especially to termination or reduction and also to compensation for damages of any kind i.e. also for any damageswhich did not occur on the supplied object itself. This exclusion of liability does not apply if the owner or leading employee have acted with intent or gross negligence andalso if there has been blameworthy violation of essential obligations under the contract. In the event of blameworthy violations of essential obligations under the contract,except in cases of intent or gross negligence by the owner of leading employee, the supplier is only liable for sensibly foreseeable damage typical of the contract. Theexclusion of liability also does not apply in cases where In accordance with the product liability law liability is accepted for damage to persons or property on privately usedobjects, where faults exist on the object supplied. It also does not apply when properties are absent which were expressly promised when the promise had the intention ofcovering the purchaser against damage which did not arise on the supplied object itself.X. Court of jurisdictionIf the purchaser is a fully qualified merchant, a legal personage in public law or a legally separate property proceedings for all disputes arising from a contractualrelationship are to be taken at the court with jurisdiction for the supplier's head office or the branch of the supplier which made the delivery. The supplier is also entitled lotake proceedings against the buyer at the court of jurisdiction for his head office.MATO GmbH & Co. KG63165 MühlheimGermany41 Product Catalogue 2015 41

Global Expertise in Belt Maintenance Products Valid from 01 January 2015 · All previous price lists are superseded by this price list.MATO GmbH & Co. KGHeadquartersBenzstraße 16-2463165 Mühlheim am MainTel.: +49 (0) 6108-906-0Fax: +49 (0) 6108-906 [email protected] Industries Ltd. MATO France S.A.R.L. MATO Iberica, S.L.U. MATO Corporation MATO Australia Pty Ltd.Unit 1 Philips Road Z.A. - Rue du 19 Mars 1962 Polígono Industrial Mora Garay 201 Resource Drive PO Box 448Whitebirk Ind. Estate F-57490 L’Hôpital Calle Marie Curie, parc. 36/38 Beckley, WV 25801 2/ 152 Mitchell AvenueBlackburn, Lancashire France E-33211 Gijón, Asturias West Virginia 2327 Kurri Kurri NSWBB1 5PG United Kingdom Tel.: +33 (0) 3-87821215 Spain USA AustraliaTel.: +44 (0) 1254-387638 Fax: +33 (0) 3-87297213 Tel.: +34 (0) 985-328900 / 328211 Tel.: +1 304 255-1280 Tel.: +611300-850 795Fax: +44 (0) 1254-238023 [email protected] Fax: +34 (0) 985-322647 Fax: +1 304 255-2501 Fax: +61 2 [email protected] [email protected] [email protected] [email protected] Products Pty Ltd. MATO Belt Maintenance Equipment Langfang Co Ltd. MATO Sib MATO UglemechanisatijaP.O. Box 224 Building No. 36, Tianshan International business park Uliza Telefonnaja 15 Uliza Oboronnaja 34gKempton Park, 1620 065201 Yanjiao, Sanhe, Hebei Kemerovo 91047 Lugansk28 Forge Road, Spartan P.R. China 652523 Leninsk Kusnezkij UkraineSouth Africa Tel.: +86 (0) 10-61593667 Russia Tel.: +38 (0) 6 42 502 949Tel.: +27 (0) 11-928 4163 Fax: +86 (0) 316-3310575 Tel.: +7 (8) 38456-35166 Fax: +38 (0) 6 42 428 880Fax: +27 (0) 11-923 6071 [email protected] Fax: +7 (8) 38456-35166 [email protected]@multotec.co.za [email protected] Your Specialist for MATO Quality ProductsMATO Suisse GmbH MATO Kasachstan GmbHIndustriestrasse 53 Erzhanov Straße 10/2CH-6034 Inwil 100009 KaragandaSwitzerland Republik KasachstanTel.: +41 (0) 41-4490990 Tel.: +7 (0) 7 212 910 063Fax: +41 (0) 41-4490992 Fax: +7 (0) 7 212 910 [email protected] · www.mato.ch [email protected]