7

www.mechanical-tools.com pREMIUM Mechanical Tools ‫ﺻـــــﺎروخ ﻗﻄﻊ و ﺗﺠﻠﻴﺦ‬ ELECTRIC ANGLE GRINDER EN ORIGINAL INSTRUCTIONS pREMIUM Mechanical Tools DG-180FB, DG-230FB DG-180FB 62 E9l-,GSoamndhaonr-reoy,aD,aAnlwAoznb-gauk,eAynas,aCna-siri,oGGyoevoenrgngoi-draot,eRepublic of Korea DG-180FC, DG-230FC DG-230FB Mechanical Tools 02 2T5e9l1: 5In9t+5852--301-249205-5931090971 post code : 11111 DG-924FC DG-180FC DG-180FB, DG-230FB DG-230FC DG-180FC, DG-230FC DG-924B DG-924B, DG-924FC DG-924FC DG-924AVT DG-924AVT DG-924AVTA DG-924AVTA DG180-22, DG180-22F DG180-22 DG230-22, DG230-22F DG180-22F DG230-22 DG230-22F To reduce the risk of injury, user must read instruction manual  Mechanical Tools

It is essential that instruction 2) Electrical safety A wrench or a key left attached to a rotating performed. Use of the power tool for manual is read before the power part of the power tool may result in personal operations different from those intended could tool is operated for the first time. a) Power tool plugs must match the injury. result in a hazardous situation. Always keeps this instruction manual outlet. Never modify the plug in any way. together with the power tool. Do not use any adapter plugs with e) Do not overreach. Keep proper 5) Service Ensure that the instruction manual earthed (grounded) power tools. footing and balance at all times. This a) Have your power tool serviced by a is with the power tool when it is Unmodified plugs and matching outlets will enables better control of the power tool in given to other persons. reduce risk of electric shock. unexpected situations. qualified repair person using only identical replacement parts. This will ensure that the Table of Contents 2 b) Avoid body contact with earthed or f) Dress properly. Do not wear loose safety of the power tool is maintained. 3 grounded surfaces, such as pipes, clothing or jewellery. Keep your hair, 1. General Power Tool Safety Warnings 6 radiators, ranges and refrigerators. clothing and gloves away from moving 2. Angle Grinder Safety Warnings 2. Angle Grinder Safety Warnings 7 There is an increased risk of electric shock if parts. Loose clothes, jewellery or long hair 3. Check Before Use 8 your body is earthed or grounded. can be caught in moving parts. 1) Safety instructions for all operations 4. Noise and Vibration Emissions 9 5. Specifications and List of contents 10 c) Do not expose power tools to rain or g) If devices are provided for the Safety warnings common for grinding, 6. Descriptions of functions and Applications 12 wet conditions. Water entering a power tool connection of dust extraction and Sanding, Wire Brushing, Polishing or 7. Operating Instructions will increase the risk of electric shock. collection facilities, ensure these are Abrasive Cutting-Off operations 8. Maintenance and Servicing connected and properly used. Use of dust d) Do not abuse the cord. Never use collection can reduce dust-related hazards. a) This power tool is intended to Note the cord for carrying, pulling or function as a grinder, sander, cut-off tool. unplugging the power tool. Keep cord 4) Power tool use and care Read all safety warnings, instructions, As our engineers are striving for the away from heat, oil, sharp edges or illustrations and specifications provided constant research and development to moving parts. Damaged or entangled cords a) Do not force the power tool. Use the with this tool. Failure to follow all instructions develop the quality of products, shape or increase the risk of electric shock correct power pool for your application. listed below may result in electric shock, fire structure of our model can be The correct power tool will do the job better and/or serious injury. changed without previous notice. e) When operating a power tool and safer at the rate for which it was designed. outdoors, use an extension cord suitable b) Operations such as wire brushing, 1. General Power Safety Warnings for outdoor use. Use of a cord suitable for b) Do not use the power tool if the polishing are not recommended to be outdoor use reduces the risk of electric switch does not turn it on and off. Any performed with this power tool. Operations WARNING Read all safety warnings shock. power tool that cannot be controlled with the for which the power tool was not designed may switch is dangerous and must be repaired. create a hazard and cause personal injury. and all instructions. f) If operating a power tool in a damp location is unavoidable, use residual c) Disconnect the plug from the power c) Do not use accessories which are not Failure to follow the warnings and instructions current device (RCD) protected supply. source and/or the battery pack from the specifically designed and recommended by may result in electric shock, fire and/or Use of an RCD reduces the risk of electric power tool before making any adjustments the tool manufacturer. Just because the serious injury. Save all warnings and shock. changing accessories, or storing power accessory can be attached to your power tool, instructions for future reference. The term tools. Such preventive safety measures it does not assure safe operation. power tool in the warnings refers to your 3) Personal safety reduce the risk of starting the power tool mains-operated (corded) power tool or accidentally. d) The rated speed of the accessory battery-operated (cordless) power tool. a) Stay alert, watch what you are doing must be at least equal to the maximum and use common sense when operating a d) Store idle power tools out of the speed marked on the power tool. 1) Work area safety power tool. Do not use a power tool while reach of children and do not allow persons Accessories running faster than their rated you are tired or under the influence of speed can break and fly apart. a) Keep work area clean and well lit. drugs, alcohol or medication. A moment of unfamiliar with the power tool or these Cluttered or dark areas invite accidents. inattention while operating power tools may instructions to operate the power tool. e) The outside diameter and thickness of result in serious personal injury. Power tools are dangerous in the hands of your accessory must be within the capacity b) Do not operate power tools in untrained users. rating of your power tool. Incorrectly sized explosive atmospheres, such as in the b) Use personal protective equipment. accessories cannot be adequately guarded or presence of flammable liquids, gases or Always wear eye protection. Protective e) Maintain power tools. Check for controlled. dust. Power tools create sparks which may equipment such as dust mask, non-skid misalignment or binding of moving parts, ignite the dust or fumes. safety shoes, hard hat, or hearing protection breakage of parts and any other condition f) Threaded mounting of accessories used for appropriate conditions will reduce that may affect the power tools operation. must match the grinder spindle the thread. c) Keep children and bystanders away personal injuries. If damaged, have the power tool repaired For accessories mounted by flanges, the while operating a power tool. Distractions before use. Many accidents are caused by arbour hole of the accessory must fit the can cause you to lose control. c) Prevent unintentional starting. poorly maintained power tools. locating diameter of the flange. Accessories Ensure the switch is in the off position that do not match the mounting hardware of before connecting to power source and/or f) Keep cutting tools sharp and clean. the power tool will run out of balance, vibrate battery pack, picking up or carrying the Properly maintained cutting tools with sharp excessively and my cause loss of control. tool. Carrying power tools with your finger on cutting edges are less likely to bind and are the switch or energising power tools that easier to control. g) Do not use a damaged access- ory. have the switch on invites accidents. Before each use inspect the accessory g) Use the power tool, accessories and d) Remove any adjusting key or tool bits etc., in accordance with these wrench before turning the power tool on. instructions, taking into account the working conditions and the work to be 2 3

such as abrasive wheels for chips and inside the housing and excessive and cause loss of control or kickback. a) Do not “jam” the cut-off wheel or cracks, backing pad for cracks, tear or accumulation of powdered metal may cause e) Do not attach a saw chain apply excessive pressure. Do not attempt excess wear, wire brush for loose or electrical hazards. to make an excessive depth of cut. cracked wires. If power tool or accessory woodcarving blade or toothed saw blade. Overstressing the wheel increases the is dropped, inspect for damage or install o) Do not operate the power tool near Such blades create frequent kickback and loading and susceptibility to twisting or an undamaged accessory. After specting flammable materials. Sparks could ignite loss of control. binding of the wheel in the cut and the and installing an accessory, position these materials. possibility of kickback or wheel breakage. yourself and bystanders away from the 3) Additional safety instructions for plane of the rotating accessory and run p) Do not use accessories that require grinding and cutting-off operations b) Do not position your body in line the power tool at maximum no-load speed liquid coolants. Using water or other liquid Safety Warnings Specific for Grin- with and behind the rotating wheel. When for one minute. Damaged accessories will coolants may result in electrocution or shock. ding and Abrasive Cutting-Off the wheel, at the point of operation, is moving normally break apart during this test time. Operations away from your body, the possible kickback 2) Further safety instructions for all may propel the spinning wheel and the power h) Wear personal protective equipment. operations Kickback and Related a) Use only wheel types that are tool directly at you. Depending on application, use face shield, Warnings recommended for your power tool and the safety goggles or safety glasses. As specific guard designed for the selected c) When wheel is binding or when appropriate, wear dust mask, hearing Kickback is a sudden reaction to a pinched or wheel. Wheels for which the power tool was interrupting a cut for any reason, switch protectors, gloves and workshop apron snagged rotating wheel, packing pad, brush not designed cannot be adequately guarded off the power tool and hold the power tool capable of stopping small abrasive or or any other accessory. Pinching or snagging and are unsafe. motionless until the wheel comes to a workpiece fragments. The eye protection causes rapid stalling of the rotating accessory complete stop. Never attempt to remove must be capable of stopping flying debris which in turn causes the uncontrolled power b) The grinding surface of centre the cut-off wheel from the cut while the generated by various operations. The dust tool to be forced in the direction opposite of depressed wheels must be mounted wheel is in motion otherwise kickback mask or respirator must be capable of the accessory’s rotation at the point of the below the plane of the guard lip. An may occur. Investigate and take corrective filtrating particles generated by your binding. improperly mounted wheel that projects action to eliminate the cause of wheel operation. Prolonged exposure to high through the plane of the guard lip cannot be binding. intensity noise may cause hearing loss. For example, if an abrasive wheel is snagged adequately protected. or pinched by the workpiece, the edge of d) Do not restart the cutting operation i) Keep bystanders a safe distance the wheel that is entering into the pinch point c) The guard must be securely in the workpiece. Let the wheel reach full away from work area. Anyone entering the can dig into the surface of the material attached to the power tool and positioned speed and carefully re-enter the cut. The work area must wear personal protective causing the wheel to climb out or kick out. for maximum safety, so the least amount wheel may bind, walk up or kickback if the equipment. Fragments of workpiece or of a The wheel may either jump toward or away of wheel is exposed towards the operator. power tool is restarted in the workpiece. broken accessory may fly away and cause from the operator, depending on direction of The guard helps to protect operator from injury beyond immediate area of operation. the wheel’s movement at the point of broken wheel fragments, accidental contact e) Support panels or any oversized pinching. Abrasive wheels may also break with wheel and sparks that could ignite workpiece to minimize the risk of wheel j) Hold the power tool by insulated under these conditions. clothing. pinching and kickback. Large workpieces gripping surfaces only, when performing tend to sag under their own weight. Supports an operation where the cutting accessory Kickback is the result of power tool misuse d) Wheels must be used only for must be placed under the workpiece near the may contact hidden wiring or its own and/or incorrect operating procedures or recommended applications. For example: line of cut and near the edge of the workpiece cord. Cutting accessory contacting a “live” conditions and can be avoided by taking do not grind with he side of cut-off wheel. on both sides of the wheel. wire may make exposed metal parts of the proper precautions as given below. Abrasive cut-off wheels are intended for power tool “live” and could give the operator peripheral grinding, side forces applied to f) Use extra caution when making a an electric shock. a) Maintain a firm grip on the power these wheels may cause them to shatter. “pocket cut” into existing walls or other tool and position your body and arm to blind areas. The protruding wheel may cut k) Position the cord clear of the allow you to resist kickback forces. e) Always use undamaged wheel gas or water pipes, electrical wiring or objects spinning accessory. If you lose control, the Always use auxiliary handle, if provided, flanges that are of correct size and shape that can cause kickback. cord may be cut or snagged and your hand or for maximum control over kickback or for your selected wheel. Proper wheel arm may be pulled into the spinning torque reaction during start-up. The flanges support the wheel thus reducing the 5) Additional safety instructions for accessory. operator can control torque reactions or possibility of wheel breakage. Flanges for sanding operations Safety Warnings kickback forces, if proper precautions cut-off wheels may be different from grinding Specific for sanding Operation l) Never lay the power tool down until are taken. wheel flanges. the accessory has come to a complete a) Do not use excessively oversized stop. The spinning accessory may grab the b) Never place your hand near the f) Do not use worn down wheels from sanding disc paper. Follow manufacturers surface and pull the power tool out of your rotating accessory. Accessory may larger power tools. Wheel intended for recommendations, when selecting control. kickback over your hand. larger power tool is not suitable for the higher sanding paper. Larger sanding paper speed of a smaller tool and may burst. extending beyond the sanding pad presents m) Do not run the power tool while c) Do not position your body in the a laceration hazard and may cause carrying it at your side. Accidental contact area where power tool will move if 4) Additional safety instructions for snagging, tearing of the disc or kickback. with the spinning accessory could snag your kickback occurs. Kickback will propel the cutting-off operations clothing, pulling the accessory into your body. tool in direction opposite to the wheel’s 6) Additional safety warnings movement at the point of snagging. Additional Safety Warnings Specific n) Regularly clean the power tool’s air for Abrasive Cutting-Off Operations a) Wear ear protectors vents. The motor’s fan will draw the dust d) Use special care when working Exposure to noise can cause hearing loss. corners, sharp edges etc. Avoid 4 bouncing and snagging the accessory. Corners, sharp edges or bouncing have a tendency to snag the rotating accessory 5

b) Use auxiliary handles supplied with When the extension cord is Before switching on the disc 4. Noise and Vibration Emissions the tool. Loss of control can cause personal damaged, you must change or grinder, be sure the rotating part of injury. repair it immediately. the disc grinder is not contacted 1. Noise emission 89 dB(A) 3. The power source work material. Accidental switching The A-weighted emission c) The use of any accessory or You must use the tool in the power source on with contacted other objects sound pressure level(LpA) 100 dB(A) attachment, other than those specified in the nameplate. When you use may cause personal injury by The A-weighted emission 3 dB recommended in the instruction manual, the tool for 110 V in 220V/230V, the speed damaged grinding stone. sound power level(LwA) may present a risk of personal injury. of the motor will be increased abnormally. Uncertainty(K) In result, the grinding stone and the tool 8. An explanation of any symbols or pictograms d) The secure the workpiece. may be damaged. marked on the tool relevant to safe use 2. The operator to wear hearing protection A workpiece clamped with clamping devices or in a vice is held more secure than by hand. When you use the tool for 110V n rated speed 3. Vibration emission in 220V/230V, the motor can be V volts e) When working with the machine, damaged by a fire. Grinding mode Cutting-off mode always hold it firmly with both hands and provide hold it firmly with both hands and 4. The switch A amperes Vibration emission value(ah,AG) Uncertainty(K) provide for a secure stance. The power When you plug in the power tool is guided more secure than by hands. source with the tool switched on, Hz hertz 8.5 m/s² 1.5 m/s² you may be injured seriously by W watts f) Use suitable detectors to determine sudden rotating of the tool. revolutions or reciprocations Disc -type sanding mode if utillity lines are hidden in the work area per minute or call the local utillity company for Make sure the switch lever is returned to /min Vibration emission value(ah,AG) Uncertainty(K) assistance. Contact with electric lines can its original position by pushing or pulling it. lead to fire and electric shock. Damaging a ~ alternating current 4.5 m/s² 1.5 m/s² gas line can lead to explosion. Penetrating a water line causes property damage or may Class ้ construction 4. The following information cause an electric shock. ̻ The declared vibration total value Disposal of Old Electrical & 3. Check Before Use 5. The wheel guard Electronic Equipment has been measured in accordance 1. Connection to Power Supply The wheel guard is a protective with a standard test method and may be wall preparing for the damage of used for comparing one tool with another. ସ 110-127 V~ହ ସ 220-240 V~ହ the grinding stone. You must 9W. hMeaninisnsOeurttilnegt the plug, if a sound is ̻ The declared vibration total value install the wheel guard. heard or if it is a taken out easily, you may also be used in a preliminary must repair it. Please contact nearby assessment of exposure. You can set the desired angle of the wheel electric shop. When you use the mains guard by unfastening two small screws. outlet as it is, it causes the accident by 5. A warning Please use the tool after adjusting the angle of overheating. ̻ The vibration emission during actual the wheel guard for the work. After adjustment, please fasten two small screws use of the power tool can differ from tightly. the declared total value depending on the ways in which the tool is used. 2. The extension cord 6. Checking and installing the ̻ Identify additional safety measures grinding stone to protect the operator that are based 110-127 V 220-240 V on an estimation of exposure in the actual conditions of use (taking seNcoctmioonnindaaullcoctfrooarsresa Mlaexnimgtuhm seNcoctmiooninndaaullcoctfrooarsresa Mlaexnimgtuhm Be sure the grinding stone is in account of all parts of the operating 1.0 mm2 10 m 1.0 mm2 20 m normal condition and free from cycle such as the times when the cracks or damage. Make sure tool is switched off and when it is running 1.5 mm2 15 m 1.5 mm2 30 m the grinding stone is installed idle in addition to the trigger time). securely. To install the grinding 2.5 mm2 25 m 2.5 mm2 50 m stone, see to the section installing and removing When the power source is located far from grinding stone. your location, you may use the extension cord. However, you should use the extension 7. Trial run cord with proper length and thickness not to Always make a trial run before operation prohibit the current. When you use too long with grinding stone pointed away from or thin extension cord, the voltage drop will people to check the tool. be higher. In result, the power of the motor will be decreased. Please use the shortest Trial When replacing 3 minutes or more extension cord possible. grinding stone run time When using grinder initially 1 minute or more 6 7

5. Specifications and List of contents 6. Description of functions and Applications 1.Specifications 1. Description of functions Items Model DG-180FB DG-230FB DG-924B DG-924AVT DG180-22 DG230-22 DG-180FB, DG-230FB, DG-180FC, DG-230FC, DG-924B, DG-924FC DG-180FC DG-230FC DG-924FC DG-924AVTA DG180-22F DG230-22F Power source A : AC 220-240 V~ , 50/60 Hz A : AC 220-240 V~ , 50/60 Hz A : AC 220-230 V~ , 50/60 Hz B : AC 220-230 V~, 50/60 Hz B : AC 220-230 V~, 50/60 Hz B : AC 240 V~ , 50/60 Hz Handle Motor Single phase series commutator series motor Lock pin Handle Lock pin Rated Input(W) 2000 W 2000 W 2400 W 2400 W 2200 W 2200 W Trigger switch Brush cap Trigger switch Rated speed Stopper Stopper n 8400 /min n 6500 /min n 8450 /min n 6500 /min Size of grinding stone 180× 6× 22.23 230 × 6 × 22.23 180× 6× 22.23 230× 6× 22.23 Brush cap Wheel guard (outer dia. x thickness x minor dia., mm) Weight (Without cord) 4.3kg 4.3kg 4.9kg 4.9kg 5.3kg 5.5kg Side handle Grinding stone Side handle Grinding stone Wheel guard Cord 2-core cabtyre cable Spindle Thread M 14 Protection Class (้) DG180-22, DG180-22F, DG230-22, DG230-22F DG-924AVT, DG-924AVTA Handle Handle Brush cap Lock pin Lock pin 2. List of contents Trigger switch Trigger switch Model DG-180FB DG-230FB DG-924B DG-924AVT DG180-22 DG230-22 Brush cap Stopper DG-180FC DG-230FC DG-924FC DG-924AVTA DG180-22F DG230-22F Side handle Handle Lock Damper Items Grinding stone Optional Optional Optional Optional Optional Optional Grinding stone Wheel guard Grinding stone Side handle Wheel guard Wheel guard(type27) Wheel guard(type42) Optional Optional Optional Optional Optional Optional Spanner 2. Applications To do finishing work and removing splinters of iron, bronze, aluminum, cast. Carbon brush Optional Optional Optional Optional Optional Optional To grind of welding section part and removing rust. To do finishing work for the surface of synthetic resin, slate, brick and marble. Side handle To groove and cut tile and stone. D handle ̀ ̀ Optional Optional ̀ ̀ 8 9

7. Operating Instructions Adjust the protection guard in 3. Avoid excessive pressure on the 7. How to rotate the head of the disc grinder such a manner that sparking is grinding stone. 1. Installing and Removing prevented in the direction of Remove the plug from plug socket before Always turn off the switch and the operator. Avoid excessive pressure on the grinding any operation. For the above purpose, disconnect the plug from the power stone. Grinding is done by tool’ s weight. rotate the head of the disc grinder in a 90- supply before installing and removing Depending on the specific Apply the grinding stone lightly to the work. degree turn instead of rotating the handle. grinding stone. Never use the configuration, protective guard Excessive pressure on the grinding stone And then, unscrew four screws and the grinding stone below the peripheral 1/2/3 may be equipped with will decrease grinding speed and cause head. Do not remove the head from the velocity (See to specifications). various attachment fittings. rough finishing surface. Also, it may cause main body wholly but rotate to new position. Pcaronteocntliyvebecoavdejurswteitdh wcliathmapitnogols.crew, overheating and motor failure. After that, set four screws and fasten them. You must install the wheel guard 4. Pressing angle 8. How to rotate the handle of the disc and wear the safety goggles Protective cover with quick during using of the disc grinder cthlaemups,ecoafntoboels.adjusted without Side handle grinder (DG-924AVT, DG-924AVTA) Warning with the special parts. aPdrojutestcetidvewicthoovuetr twheithusloecokf, tcoaonls.be Do not press the whole surface of the 9. Residual current device Grinding stone grinding stone to the grinding surface. It is Protective guard with clamping screw recommended to use the disc grinder by (Only for Australia and Newzealand markets) Spanner Fastening - Loosen the clamping screw 4. inclining it in 15~30 degrees as the picture Recommendation that the tool always be Wheel nut - Insert protective guard 1/2/3 with the to do grinding work with circumference of supplied via residual current device with a the grinding stone. rated residual current of 30 mA or less. Grinding cam into the groove on auxiliary 5. Grinding direction stone handle collar 5 of machine head 6 When using a new grinding stone, be 8. Maintenance and Servicing and turn to the required position certain to grind while pulling tool Wheel Projection (working position). backwards (B direction) until the grinding Disconnect the plug from washer Lock pin - Tighten clamping screw 4. stone becomes rounded on its edge. mthaekipnogwaenry smuapipnltyenbaenfcoer.e Spindle Protection Guard with Quick Clamp Then, the grinder can be moved to any Do not touch anywhere Wheel - Open the clamping lever 7. direction. This grinding stone (Grinding before cooled down guard - Insert protective guard 1/2/3 with the particle: A, Mesh: #36) is best for heavy P1.leCahseancgheanogfeththeeggrriinnddiinnggsstotonneewith new cam into the groove on auxiliary grinding in general steel materials. Also, it one when outer diameter of the grinding 1) Place the spindle upwards. Insert the handle collar 5 of machine head 6 can be used in wide range of other stone in 180mm is worn to 100mm (For the depressed part of the wheel washer onto and turn to the required position materials. For its lower mesh, apply the grinding stone in 230mm is 130mm) the plane part of the spindle. grinding stone to the work material lightly (working position). and grind steadily to create smooth 2) Place the prominent part of the grinding - To fasten the protection guard, close finishing surface that can be made by the stone onto the wheel washer. grinding stone with higher mesh. the clamping lever 7. 6. Caution after use 3) Set the wheel nut onto the spindle over Switch off to stop the rotation of the the grinding stone by a screw. -NOTE- grinding stone, and keep the disc grinder The protection guard 1/2/3 is preadjusted in safe place. When you keep the disc 4) Insert the lock pin in the gear cover, then to the diameter of the spindle collar 5. If grinder with the grinding stone rotated in fasten the wheel nut with the spanner. requirde, the tightening tension of the the place filled with dust and shavings, clamping bracket can be changed by dust and shavings can be gotten into the 2. Mounting the Protective Devices tightening or loosening the adjustment disc grinder. Before carrying out any work on screw. Always ensure that the protection the machine, pull the mains plug. guard 1/2/3 is seated tightly on the Tcrhaeckgeridndoirnggrostoovneedcbaynabne When working sith roughing or cutting spindle collar. itmo pimapcta.cPt loenastehetadkiesccare not discs, the appropriate protective hgirtinadgeari.nIsftthsoemdeistchignrginodrer is guard must be mounted. Protective cover with lock tfahlelegnridnodwinng, sytoounemaunsdt cdhisecck - Depending on the application, adjust grinder. 7 protective guard 1/2/3 as far as the stop 6 without tools. 4 12 3 5 10 11

2. Screws 4. Motor 10. After-sales Service and Customer The winding and commutator in the motor Assistance Make sure screws in each part are set are the core of the disc grinder. tightly at regular intervals. When screws Do not scratch the surface of the winding Our after-sales service responds to your are loose, fasten them tightly. The loose and commutator in the motor, and do not questions concerning maintenance and screw causes the danger situation. apply oil or water on it. repair of your product as well as spare 3. Carbon brush parts. Exploded views and information on Disposable carbon brush is used in the Dust in the motor causes the sapre parts can also be found under : motor. The heavily worn carbon brush trouble of the motor. After www.keyang.com, Our customer service causes the trouble of the motor. using the disc grinder for represen- tatives can answer your When the length of the carbon brush is 50hours, let the compressed questions concerning possible applications reached at the wear tolerance line, air in the ventilation slots in and adjustment of products and accessorie change it with new carbon brush. the handle side by rotating Korea Also, keep the carbon brush clean to be the disc grinder in no-load Keyang Electric Machinery Co.,Ltd. moved in the brush holder freely. revolution to eliminate dust 9, Sandan-ro, Danwon-gu, Ansan-si, Gyeonggi- ୔We may apply the auto-stop carbon from the motor. do, Republic of Korea Tel : +82 31 490 5300 bwriuthsohuftorpimrepvrioovuesmneontict ein. Aquuatoli-tsytop will 5. Keep after operation Europe ionftethrreucpat rcbuornrebnrtuasuht.oWmahteicnatlhlyefodriswc ear You must keep the tool out of reach of Hoogstraat 9, 5469 EL Erp, Netherland sgtroinpd,ecrhiescsktothpepecdarfboor nthberubsuhilta-inndauto- children in dry place. Tel : + 31 413 288 345 change it. 6. Abnormal operation China It is very dangerous for customers to Keyang Electric Machinery (Suzhou) Co.,Ltd. How to change : Remove the brush troubleshoot or repair the tool for No. 889, Songjia Road, Wusongjiang Science cap with the minus driver to take off the themselves. Contact nearby A/S center and Technology Industrial Park, carbon brush. (agencies) for solution. 9W\\JQPI&KUVTKEV5W\\JQW,KCPIUWa%JKPC 7. X attachment cord Tel : +86 512 6561 3321 You must purchase the If the supply cord of this power tool is Disposal of Old Electrical & Electronic genuine parts in A/S centers damaged, it must be replaced by a Equipmen (Applicable in the European authorized by Keyang Electric specially prepared cord available through Union and other European countries with Machinery Co., Ltd. for the service organization. separate collection systems) change. When you use the 8. Caution after use carbon brush other than the Switch off to stop the rotation of the This symbol on the product or genuine parts, the commutator grinding stone, and keep the disc grinder on its packaging indicates that may be worn rapidly. In result, insafe place. When you keep the disc this product shall not be treated the life of the tool can be grinder with the grinding stone rotated in as household waste. Instead it shortened. the place filled with dust and shavings, shall be handed over to the dust and shavings can be gotten into the applicable collection point for the disc grinder. recycling of electrical and electronic equipment. By ensuring this product is The grinding stone can be disposed of correctly, you will help cimrapcakcet.dPolreagrsoeotvaekde bcyaraennot prevent potential negative conseq- tIfotihmepdaicstcognrinthdeerdiisschgitraingdaeinr.st uences for the environment and human msoumstecthhinegckotrhfealglerninddionwgns,toynoeu health, which could otherwise be caused and disc grinder. by inappropriate waste handling of this 9. Malfunction or failure product. The recycling of materials will Troubleshooting or repairing by consumer help to conserve natural resources. For is dangerous. Call for Keyang Service more detailed information about Center for the best solution. recycling of this product, please contact your local city office, your household 12 waste disposal service or the shop where you purchased the product. 13

14 15