Schaefer

STANDARD RIVET HEADS (DIMENSIONS IN INCHES) 1:r ~ 1;r~ t r 1Ti;;=,,t.I;J~r - -I • ....!.... RMI (AN 435) (AN-C30) (AN-C55) (AN-t56) (AN-tlO) (AN.-U2)DtaM.ler ROUND ROUND BRAZIER MODIFIED UNIVERSAL FLAT(ltlclMs) ,BRAZIER A 8 c R 8 c R 8 cR8 c8 cR£ 8c .109 .055 ;125 .G65 'M .166 .047 .084 .187 .OU .098 .156 .031 .113 .117 .023 .125 .'117 .054 :..o0.3nt · .125 .G25 '.it .219 .070 .111 .250 .070 .130 .234 .047 .110 .156 .031 .187 .041 .082 .187 .037 .273 .094 .138 .312 .094 .162 .312 .063 .226 .235 .047 .250 .054 .108 .063 .250 .050 •\"' .117 .117 .390 .078 .283 .312 .063 .312 .067 .135 .078 .312 . •~2 >,{& .328 .141 .166 .375 .141 .195 .468 .094 .3-40 ·.390 .078 .375 .082 .164 JIM .375 .075 .437 .188 .221 .500 .188 .260 .625 .125 .453 .468 .OM .500 .107 ·.217 .125 .500 .100 \4 .546 .234 .276 .648 .234 .325 .781 .156 .565 .625 .125 .648 .136 .272 .156 .648 .125 .656 .281 .332 .750 .281 .391 .9-40 .187 .680 .781 .156 .750 .164 .328 .187 .750 .150 ~ ff Cuppings for those rivets illustrated above as well as TUBULARS, HUCKS and HIGH-SHEARS are normally carried in stock. In addition, upon request, we can furnish cuppings for OVAL-HEAD, WAGON-HEAD,• TRUSS-HEAD, CONE-HEAD and others. Prices on request. WARRA:NTY JI WE guarantee our tools to be free from harmful defects both in material and workmanship. Our obligation and liability under this Warranty being limited to replacement or correction ·of defective tools only after written permission to return said parts for inspection has been obtained from our factory. • WE cannot assume any liability or responsibility for tool failure which occurs as a result of alteration or improper use over which we have no control. Schaefer Machine Co., Inc. Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227

·.40111 Shank Rivet Sets ~01STRAIGHT TUBULAR SETS PAGE 24 OFFSR Part Ne. (AN450 SME RIVETS) Part Na. SM 10 ,.L,, Dim. SM20 SM 11 SM21 SM 12 3¥.i\" SM22 SM 13 SM23 SM 14 5¥.l\" SM24 SM 15 7¥.l\" SM25 10¥.i\" 13¥.i\" Specify CUPPINGS 1/16 3/32 1/8 S/32 3116 1/4Round-AN 430 4302 4303 4304 4305 4306 4308 4422 4423 4424 4428Flat-AN 442 4552 4554 4425 4426Brazier-AN 455 4562 4553 4564 4555 4556 * 4558 See SM50 &SM60Mod. Brazier-AN 456 4702 4563 4704 4565 4566Universal-AN 470 ·4354 4705 4706 4568Round-AN 435 4352 4703 4355 4353 4356 4708 llllTON 4358 FLUSH HARD SOFT ¥.l\" Dia. SOOH 5005 %\"Dia. 625 H 6255 Example: To order .401\" x 3\-2\" - ~,,AN 470 Specify: SM 1G-4704 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 2

.49811 Shank Rivet Sets:'198STRAIGHT TUBULAR SETS PAGE 24 · OFFSET (AN450 STYLE RIVETS) Part No. Part No. \"L\" DIM. SM30 SM40 SM31 3V:t\" SM41 SM32 SM33 5V:t\" SM42 SM34 7V:t\" SM43 lOV:t\" SM44 SM35 13V:t\" Specify SM45 CUPPINGS 3/32 118 S/32 3116 1/4Round-AN 430 4303 4304 4305 4306 4308Flat---AN 442 4423 4553 4424 4425 4426 4428Brszier-AN 455 4563Mod. Brazier--AN 456 4554 4555 4556 I* 4558 See SM70 & SM80Universal-AN 470 4703 4564 4565 4566Rounaudn-oANN 435 4704 4705 4706 4568 4353 4354 4355 4356 4708 FLUSH 4358 Y2\" Dia. %\"Dia. HARD SOFT 500H SOOS 625H 6255 Example: To order .498\" x 5¥2\"- %\"AN 470 Specify: SM 31-4708Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 3

.40111 Shank Bell Rivet Sets L ·1 -L r.40• , / .. ~ ~~ ~ ~~01] -..... ~~ t :n ~~STRAIGHT ' Part No~ ...... Dim. OFFSET ·., SMSO 3¥.l\" Part Ho• SM51 5¥.l\" SM52 7¥.l\" SM60 SM53 10¥.l\" SM61 SM54 13¥.l\" SM62 SM55 Specify SM63 SM64• SM65 CUPPINGS 1/4 5/16 318 Round-AN 430 43010 43012 Flat-AN 442 44210 44212 45510 45512 Brazier-AN 455 4558 45610 4561.2 Mod.·Brazier-AN 456 47010 47012 43510 43512 Univer5al-AN 470 RouanudnO-ANN 435 FLUSH HARD SOFT , -% Dia. 750 H 750 s . Example: To order .401\" x 3¥.l\" - %\"AN 455 Specify: SM 50-4558 Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 4

.49811 Shank Bell Rivet SetsSTRAIGHT 3%\" OFFSET Part No. 5¥2\" Part No. SM70 10%\" SM80 SM71 SM81 SM72 13¥2\" SM82 SM73 Specify SM83 SM74 SM84 SM75 SM85 CUPPINGS 1/4 5116 3/8Round-AN 430 4558 43010 43012Flat-AN 442 44210 44212Brazier-AN 455 45510 45512Mod. Brazier-AN 456 45610 45612Universal-AN 470 47010 47012Round-AN 435 43510 43512 BUTTON FLUSH HARD SOFT fa Dia. 875 H 875 s Example: To order .498\" x 3¥2\" - %\" AN 442 Specify: SM 80-4428Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 5

Flush Sets with Rubber GuardPart No. Shank Dia. (D)SM 170 .401\" 3A\" 011 11 DIA.SM 171 .401\" 1\"SM 172 .401\" 1%\" - - - - - - 21/4 TO 2 % ----.....SM 173 .498\" 3A\" To order rubber guard only, specify part numberSM 174 .498\" 1\" followed by dash \"2\"SM 175 .498\" 1%\"To order hammer, less rubber guard, specify part number followed by dash \"l\" Flush Rivet Sets L---~1._____L~l I DIA. I~01 ~98 DIA ~ _l.401 11 Shank .49811 Shank Part No. Dia. L Part Na. Dia. LSM90 1\" 2¥.z\" SM 100 1\" 2¥2\"SM 91 SM 101SM92 1\" 3\" SM 102 1\" 3\"SM 93 SM 103SM94 1\" 5¥.z\" SM 104 1\" 5%\"SM95 SM 105SM96 1\" 7¥.z\" SM 106 1\" 7%\"SM 97 SM 107SM98 1%\" 3\" SM 108 1%'' 3 \"SM99 SM 109SM99A 1%\" 5¥2\" SM 109A 1%\" 5%\" 1%\" 3 Va II 1%\" 3 Va II 13A\" 3 % II 13A\" 3%11 1Va\" 2%\" 1Va\" 2%\" 1lts,, 2%\" 1%\" 21/4\" Specify Dia. & \"L\" Specify Dia. & \"L\"Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 6

Offset Flush Rivet Sets Part No. Shank lenlJlh (l) Dia. (D) Part No. Shank length (l) Dia. (D)SM 140 .401\" 3Y.i\" 1\" SM 160 .498\" 3-W' l IISM 141 .401 11 5W' 1\" SM 161 .498\" 5Y.i\" 111SM 142 .401\" 7Y.i\" 1II SM 162 .498\" 7Y.l' 111SM 143 .401 11 3Y.i\" 1%11 SM 163 .49811 3Y.i\" 1%11SM144 .401\" 5~\" 1%11 SM 164 .498\" 5Y.i\" 1%\"SM 145 .401\" SM 165 .498\" 7Y.i\" 1%11SM 146 .401\" 7~\" 1%\" SM 166 .498\" Specify Specify Specify Specify Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request Flush Rivet Sets I4~ TO .401 .401 11 Shank .49811 Shank Part No. Dia. Part No. Dia.SM 110 3,4\" SM 120 1\"SM 111 SM 121 1Ve\"SM 112 l\" SM 122 1%\"SM 113 1'!4\" SM 123 1Y2\" 1~\" Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 7

Double Offset Rivet Sets Part Na. Shank Length \"L\" i---------- L ----------SM 130 .401\" 5Yl' SHANKSM 131 .401\"SM 132 .498\" 7~\"SM 133 .498\" 5¥1\" 71h\" CUPPINGS t./16 3/32 t/I 5132 3116 t/4Round-AN 430 4302 4303 4304 4305 4306 4308Flat-AN 442 4422 4423 4424 4425 4426 4428Brazier-AN 455 4552 4553 4554 4555 4556 4558Mod. Brazier-AN 456 4562 4563 4564 4565 4566 4568Universal-AN 470 4702 4703 4704 4705 4706 4708 4352 4353 4354 4356 4358Round:.-AN 435 4355 IUTION Example: To order .401\" x 7W' -3/16\" AN 470 Specify: SM 131 - 4706• Gooseneck Rivet Sets 1112\" '.401 112\" 4 SMGN- CUPPINGS t,/16 3/32 t/8 5/32 3116 Round-AN 430. 4302 4303 4304 4305 4306 Flat-AN 442 4422 4423 4424 4425 4426 Brazier-AN 455 4552 4553 4554 4555 4556 Mod. Brazier-AN 456 4562 4563 4564 4565 4566 Universal-.AN 470 4702 4703 4704 4705 4706 Roundl-u:-nAONH 435 4352 4353 4354 4355 4356 Example to order .401 Shank x AN 470 % Specify SMGN-4704 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 8

\"Knock-out\" Punchesr r 31/2\" ;~~li~--t_l PART NO. RIVET SIZE .401 SHANK~_ ITRIVET SIZE SMK-3 3/32I f. ,, SMK-4 1/8 .._. ,,. SMK-5 5/32 SMK-6 3/16 SMK-7 7/32 SMK-8 1/4 SMK-10 5/16 SMK-12 3/8• \"K. nock•out\" Punches r ·\"t\" ~li~--t_l \"A\" Dash rSHANK __,-' Dim. No. f '- TI A 1/8 -4 5/32 -5 -6 3/16 -8 1/4 .401 11 Shan~k \"L\" Dim. .49811 Shank SMi<O 10 3~\" SMKO 30 SMKO 11 SMKO 31 SMKO 12 5~\" SMKO 32 SMKO 13 SMKO 33 SMKO 14 7%\" SMKO 34 SMKO 15 10%\" SMKO 35 13%\".... Specify Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 9

.187 Shank Cupped Squeezer Sets \.-r--....L- . , Part No. \"L\" Dim.TUBULAR SETS PAGE 24 SM200 %\"(AN450 STYLE RIVETS) SM201 %\" SM202 'Y.1' SM203 %\" SM204 SM205 3.4\" Specify CUPPINGS 1/16 ~/32 111 5132 3/16 1/4Round-AN 430 4302 4303 4304 4305 4306 4308Flat-AN 442 4422 4423 4424 4425 4426 4428Brazier-AN 455 4552 4553 4554 4555 4556 4558 4566 4568Mod. Brazier-AN 456 4562 4563 ·4564 4565 4708 4706 4358Universal-AN 470 4702 4703 4704 4705 4356Rounadu-nAoNN 435 4352 4353 4354 4355 Example: To order L= %\" - Mi\" AN 470 Specify: SM 200-4704.250 Shank Cupped Squeezer Sets --L~---1·1 Pent No. \"L\" Dim. SM220 %\"TUBULAR SETS PAGE 24 SM221 %\"(AN450 STYLE RIVETS) SM222 V2\" SM223 %\" 3.4\" SM224 Specify SM225CUPPINGS 1/16 3/32 111 S/32 3/16 1/4 5/16 311Round-AN 430 4302 4303 4304 4305 4306 4308 43010 43012 44210 44212Flat-AN442 4422 4423 4424 4425 4426 4428 45510 45512 4558 45610 45612Brazier-AN 455 4552 4553 4554 4555 4556 4568 47010 47012 43510 43512. Mod. Brazier-AN 456 4562 4563 4564 4565 4566 4708Universal-AN 470 4702 4703 4704 4705 4706 4358Round-AN 435 4352 4353 4354. 4355 4356 IUtTON Example: To order L= %\" - Mi\" AN 470 Specify: SM 220-4704 Schaefer Machine Company• Tel. 516.248.6880 • Fax. 516.747.2227 10

.312 Shank Cupped Squeezer. Sets Part No. L11 11 Dim. ,____ L - - - - 1 •1SM 240 %\" TUBULAR sm PAGE 24SM 241 %\"SM242 (AN450 STYLE RIVETS)SM243 ~IISM 244SM 245 %\" %\" Specify CUPPINGS 3/32 . 1/1 5/32 3/16 1/4 5/16 3/1Round-AN 430 4303 4304 4305 4306 4308 43010 43012 44210 44212Flat-AN442 4423 4424 4425 4426 4428 45510 45512 45610 45612Brazier-AN 455 4553 4554 4555 4556 4558 47010 47012 43510 43512Mod. Brazier-AN 456 4563 4564 4565 4566 4568Universal-AN 470 4703 4704 4705 4706 4708Round-AN 435 4353 4354 4355 4356 4358 BUTTON Example: To order l = %\" - Ya\" AN 470 Specify: SM 240-4704.375 Shank Cupped Squeezer Sets Part No. \"L\" Dim. TUBULAR sm PAGE 24SM260 V..\" (AN450 STYLE RIVETS)SM261 %\"SM262SM263 ~\"SM264SM265 %\" %\" SpecityCUPPINGS 3/32 1/1 5/32 3/16 1/4 5/16 3/1Round-AN 430 ~ 4303 4304 4305 4306 4308 43010 43012 44210 44212Flat-AN442 4423 4424 4425 4426 4428 45510 45512 45610 45612Brazier-AN 455 4553 4554 4555 4556 4558 47010 47012 43510 43512Mod. Brazier-AN 456 4563 4564 4565 4566 4568Universal-AN 470 4703 4704 4705 4706 4708Round-AN 435 4353 4354 4355 4356 4358 BUTTON Example: To order l = % \" - Va\" AN 470 Specify: SM 260-4704 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 11

Flush Squeezer Sets _r·l:_ CL---1 r·2: CL=:i iE:--...:l ~ l l -(N r -\"~ VllCO -'· ·-r - t -- LJ .250 Shank JJ.187 Shank CAN BEPart No. \"I!' Dim. Part No. \"L\" Dim. FURNISHED WITH 1/2 B.D.SM210 1/8\" SM230 ' 1/8\"SM211 1/4\"SM212 3/8\" SM231 1/4\"SM213 1/2\"SM214 5/8\" CAN BE SM232 3/8\"SM215 3/4\" FURNISHEDSM216 7/8\" WITH 3/8 B.D. SM233 1/2\" -SM217SM218 1\" c=:L. I SM234 5/8\" Specify SM235 3/4\" * l SM236 7/8\" ,.~2 uIO(CX> SM237 1\",, ~ SM 238 Specify 1 -r--1 , .375• r---L I -,, I - I I -' ~ ,-- (t) LJ.312 Shank .375 ShankPart No. \"'L\" Dim. Part No. ''L\" Dim. SM270 1/8\" ; SM 271SM250 1/8\" ~ SM 272 1/4\"SM251 1/4\" SM 273 3/8\"SM252 3/8\" SM 274 1/2\"SM253 1/2\" SM275 5/8\"SM 254 5/8\" SM276 3/4\"SM 255 3/4\" SM 277 718\"SM 256 7/8\" SM 278SM 257 1\"SM 258 1\" Specify Specify Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 12

Spacer Shims Part Shank \"A\"+010 Part Shank \"A\"+-oOolOo No. Size -000 No. Size 1/32 SM-SO .187 1/64 SM-S6 .312 1/16 SM-Sl 1/32 5M-57 .312 1/8 SM-S2 .187 1/16 5M-S8 .312 1/32 SM-S3 .187 1/32 5M-59 1/16 SM-S4 1/16 5M-S10 .375 1/8 .250 1/8 SM-511 .375 SM-S5 .250 .250 .375 Shank Adapters Part No. \"\"A'' ''8'\" \"C'\" ,- ---- _l_ SMSA-1 1/2 .250 .187 --- SMSA-2 3/8 .312 .187 \_ c SMSA-3 3/8 .375 .187 T f--A--+I Threaded Adiustable DolliesT. .,~F------- B---~ FLUSH THREADED DOLLIESl ~1111.L.:.L:..L.:.L:I~L-----h\"T'T~r:r.r:r.1\\"'--r'f Part No. A I cD SMTD-1 3/8 -24 1% 5/8 1/2 SMTD-2 3/8 -24 2% 5/8 1/2 SMTD-3 7/16-20 l1~6 3/4 5/8 SMTD-4 7/16-20 3% 3/4 5/8 SMTD-5 5/8 -18 3% 3/4 5/8TO ORDER CUPPED DOLLY, USE THE NUMBERS Example:.....BELOW, PRECEDED .SY FLUSH DOLLY NUMBER.Size 3/32 1/8 5/32 3/16 1/4 To order 3/8-24 Flush Dolly x 2%\" longAN435 4353 4354 4355 4356 4358 Specify: SMTD-2AN430 4303 4304 4305 4306 4308 Example: To order 7/16-20 Dolly x 3 Y2 longAN442 4423 4424 4425 4426 4428 x 5/32 AN470 cuppingAN455 4553 4554 4555 4556 4558 Specify: SMTD-4-4705AN456 4563 4564 4565 4566 4568AN470 4703 4704 4705 4706 4708AN450 4503 4504 4505 4506 4508 AN4558 not available in -1 or -2 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 13

Drive Sets for ''Huck'' Lockbolt·b- L 1· L l ]-h] I JCStraight Bell .401 Shank .498 ShankSTRAIGHT BELL \"L\" Dim. STRAIGHT BELL SMH10 SMH50 3%\" SMH 30 SMH 70 SMH 11 SMH 51 5%\" SMH 31 SMH 71 SMH12 SMH 52 7%\" SMH 32 SMH 721/8 5/32 3/16 1/4 5/16 3/8 Rivet Sizes 1/8 5/32 3/16 1/4 5/16 3/8 Available-4 -5 -6 -8 -10 -12 Rivet Dash No. -4 -5 -6 -8 -10 -12Straight Offset· Bell Offset .401 Shank .498 ShankSTRAIGHT BELL \"L\" Dim. STRAIGHT BELL SMH 20 SMH 6.0 3%\" SMH 40 SMH 80 SMH 21 SMH 61 5%\" SMH 41 SMH 81 SMH 22 SMH62 7%\" SMH 42 SMH 821/8 5/32 3/16 1/4 5/16 3/8 Rivet Sizes 1/8 5/32 3/16 1/4 5/16 3/8 Available -4 -5 -6 -8 -10 -12-4 -5 -6 -8 -10 -12 Rivet Dash No. Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 14

Drive Sets for \"Huck\" Lockbolt Double Offset,. L rLij :D ~ STRAIGHT BELL.401 Shank .498 ShankSTRAIGHT BELL \"'L11 Dim. STRAIGHT BELLSMH 130 SMH 135 5112 II SMH 132 SMH 137SMH 131 SMH 136 SMH 133 SMH 138 Rivet Sizes1/8 5/32 3/16 1/4 5/16 3/8 Available 1/8 5/32 3/16 1/4 5/16 3/8 Rivet Dash No. -4 -5 -6 -8 -10 -12-4 -5 -6 -8 -10 -12 Note: 3/8 Rivet size available in 7 Y2\" length only.Squeezer Set for \"Huck\" Lockbolts.----SHANK Rivet Size Dash No. Body Length Body Dia. Part No. Shank Dia. 1/8 -4 5/8 5/8 5/32 -5 5/8 5/8SMH 205 .187 3/16 5/8 5/8 'SMH 225 .250 -6SMH 245 .312 1/4 3/4 5/8SMH 265 •.375 -8 5/16 1 7/8 3/8 -10 1 114 1 Ye -12 Note: 3/8 Rivet size NOT available in 3/16 shank. 1/8 Rivet size ONLY available in 3/16 shank.Example: To order .250 Shank Squeezer for 3/16 Lockbolt Specify: SMH 225-6Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 15

Straight Drive Sets for High-Shear· Rivets;-NK~ :Il~L-=-~---.i~I SHANK LSTRAIGHT OFFSET.401 SHANK .498 SHANK \"L\"Dlm. .401 SHANK .498 SHANKSMHS 10 SMHS 30 31/2 11 SMHS 20 SMHS 40SMHS 11 SMHS31 51/2 11 SMHS 21 SMHS 41SMHS 12 SMHS 32 7%\" SMHS 22 SMHS 42SMHS 15 SMHS 35 23/c\" Rivet Dash No.Example: To order a .498 Shank, 5 % \" long, for 3/16 Rivet, l/811 -;-4 Specify: SMHS 31-6. 5/3211 -5 3/16\" -6 1/4\" -8Bell Type Drive Sets for High-Shear Rivets ·I I· L *. . ,STRAIGHT OFFSD.401 SHANK .498 SHANK ''L\"Dlm. .401 SHANK .498 SHANKSMHS50 SMHS 70 31/2 11 SMHS 60 SMHS 80SMHS 51 SMHS 71 5%\" SMHS 61 SMHS 81 SMHS 72 71/2 11 SMHS62 SMHS 82SMHS 52 Rhwt Dash No. Note: Order as above for aluminum rivets. For monel or stain- less, add suffix \"M\" after the \"dash\" number.5/16\" -103/811 -12Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 16

Drive Sets for High-Shear Rivets L >i Rivet Size 1/8 5/32 3/16 1/4 5/16 3/8 --I ---(/ Dash No's. -4 -5 -6 -8 -10 -12 II I ,.---l._ II ' SHANK.401 SHANK 2\" .498 SHANK Example: To order .401 shank, 2 Ya II 2% 11 long for 3/16 Rivet, SMHS 16 SMHS36 SMHS 17 SMHS 37 Specify SMHS 18-6. SMHS 18 211211 SMHS 38 SMHS 19 2 3.4 II SMHS 39 .401 shank available all sizes..498 shank in-6,-8, Note: Order as above for aluminum rivets. For monel -10,-12 rivets only. or stainless, add suffix \"M\" after dash number. •401 SHANK .498 SHANK SMHS 401K SMHS 498K RIVET SIZE Rivet Size 1/8 5/32 3/16 1/4 5/16 3/8 Example: To order \"Knock-out\" for 3/16 Dash No's. -4 -5 -6 -8 -10 -12 rivet x .401 shank. Specify: SMHS 401 K-6. .High-Shear Rivet Removersi .401 SHANK Part No. SMHSRR Dash No• Example: To order a remover for 3/16 rivet. Specify: SMHSRR-6. Rivet Size 1/8 5/32 3/16 1/4 5/16 3/8 Dash No's. -4 -5 -6 -8 -10 -12 Can be furnished in different lengths and shanks. Prices on request. Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 17

Gooseneck Insert Adapters FOR HUCK LOCKBOLT AND HIGH SHEAR RIVO INSERTS SHANK \"A\" \"A\" Dim. 401 Shank 498 Shank .406 SMA 450 SMA 455 .531 SMA 451 SMA 456 Inserts for Gooseneck AdaptersFor High-Shear Rivet Rivet Dash No. For Huck Lockbolt\"A\"pm. P.-tNo. 1/8\" -4 \"A\"Dlm. Part No. 5/32\" .406 SMHS460 3/16\" -5 .406 SMH 465 SMHS461 1/4\" .531 SMH 466 .531 5/16\" -6 3/8\" -8 -10 -12To order for Stainless or Monel .406 Inserts available for -4, Example: To order a .531rivets, add suffix \"M\" after -5, -6 rivets. insert for 1/4\" lockbolt.\"dash\" number. .531 Inserts available for -8, Specify: SMH 466-8 -10,-12 rivets.Notched Sets for High-Shear RivetsSHANK Rivet Dash No. lhonkDlm. P.-tNo. 1/8\" -4 5/32\" -5 .401 SMHS 150 -6 .498 3/16\" SMHS 155 -8 1/4\" -10 5/16\" -12 3/8\" Example: To order .401 shank, notched Rivet set for 3/16 Rivet, Specify SMHSl 50-6. Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 18

Squeezer Sets for High-Shear Rivets SHANK \ \ \ \'--- ( \ \ \ I \,,_,,--- I l.., Rivet .187Shanlc .2SOShank .312 Shanie .375 Shanie1/8 SMHS 200-4 SMHS 220-4 SMHS 240-4 SMHS 260-45/32 SMHS 200-5 SMHS 220-5 SMHS 240-5 SMHS 260-53/16 SMHS 200-6 SMHS 220-6 SMHS 240-6 SMHS 260-61/4 SMHS 200-8 SMHS 220-8 SMHS 240-8 SMHS 260-85/16 SMHS 220-10 SMHS 240-10 SMHS 260-103/8 SMHS 220-12 SMHS 240-12 SMHS 260-12 Example: To order .312 Shank for 1/4\" Rivet Specify: SMHS 240-8Squeezer Sets for High-Shear Rivets For use with Stationary Pedestal Squeezers and with Portable Counter-Balanced Heavy-Duty PneumaticCompression Riveters.SHANK Rivet Dash Sise No. 1/8 -4 -5 5/32 -6 3/16 -8 -10 1/4 -12 5/16 3/8Shank Part No. Note: Order as above for aluminum rivets. For Monel or Stainless, add suffix \"M\" after Rivet Dash Number..250 SMHS 190 ·.312 SMHS 191 Example: To order .31 2 Shank for 3I16 Rivet,•375 SMHS 192 Specify: SMHS 191-6•Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 19

·Rivet Sets For Use With Jiffy Series B Type Riveters STRAIGHT CUPPED RIVET SETSSHANK Shank Dim. Part No. ''L\"' Dim. .401 SMJ 510 1~' SMJ 515 .498 1 3/a OFFSET CUPPED RIVET SETSSHANK *~10° .401 SHANK .498 SHANK • Part No. \"l\"Dim. Part No. \"l\" Dim. SMJ 520 1 o/a SMJ 525 JIM, I SMJ 521 P.U I SMJ 522 1 Ya SMJ 526 l1%, SMJ 527 lI SMJ 523 2 SMJ 528 2M, l 2M, l CUPPINGS, 1/16 3/32 1/1 5/32 3/16 114 I Round-AN 430 4302 4303 4304 4305 4306 4308 Flat-AN442 4422 4423 4424 4425 4426 4428 Brazier-AN 455 4552 4553 4554 4555 4556 4558 4568 Mod. Brazier-AN 456 4562 4563 4564 4565 4566 4708 Universal-AN 470 4702 4703 4704 4705 4706 4358 Round-AN 435 4352 4353 4354 4355 4356 IUTTON Example: To order 1/8\" AN442 x 401 Shank Straight Set Specify: SMJ510-4424 Flush Sets .498 SHANKSHANK .401 SHANK Part No. \"l\"Dim. \"A\" Dim. Part No. \"L\" Dim. \"A\" Dim. SMJ 500 u~, 3/8 SMJ 505 1 3/a 3/8 SMJ 501 1~, 1/2 l3/a 1/2 SMJ 502 1~, 5/8 SMJ 506 P/a 5/8 SMJ 503 1~, Specify SMJ 507 P/a Specify SMJ 508 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 20

Rivet Sets For Use With Jiffy Series B Type Riveters HIGH-SHEAR STRAIGHT DRIVE sns SHANK RIVET .,...401 Shank .498 Shank SHANK SIZE Part No.SHANK Part No. ''I!' SHANK 1/8 SMJ 540 1~6 5/32 SMJ 545 1 Y2 3/16 SMJ 541 1~6 SMJ 546 1/4 SMJ 547 1% 'SMJ 542 1%6 SMJ 548 SMJ 543 l1~6 1 3Jc 2 HUCK STUMP BOLT STRAIGHT DRIVE sns RIVET .401 Shank .498 Shank SIZE Part No. \"I!'' Part No. .'L.. 1/8 5/32 SMJ550 1% SMJ 555 Hi, 3/16 1/4 SMJ 551 1~, SMJ 556 1% SMJ 552 1% SMJ 557 1%6 SMJ 553 1~6 SMJ 558 1 Va FLUSH sns WITH RUBBER GUARD T \"D\"Dlm. .401 Shanie .498 Shank 3/4\" SMJ 530 SMJ 535 1\" SMJ 531 SMJ 536 1 %\" SMJ 532 SMJ 537 FLUSH sns .401 Shanie •..,., Dim. .491Sllmlk D SMJ 559 3/4\" SMJ 564 SMJ 560 1\" SMJ 565 SMJ 561 11Jc II SMJ 566 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 21

Drive Sets For AN450 Tubular Rivets,.. L .401 SHANK L ~·J]ij -1 ,.. ] ~ ijISTRAIGHT ''l\" Dim. OFFSET SM 20 SM 10 3112 II SM 21 SM 11 5112\" SM22 SM 12 7112\" <AN450> FLARING Rivet ANVIL <OVAL> Can also be Size -20VALfurnished with 4502 -30VAL Example: To order 498 Shank- 4503 1/16 -40VAL 5/32 Flaring Tool x 3/32 -50VAL 5 1/2\" long (straight) Prices on 4504 -60VAL application 4505 1/8 -80VAL Specify: 4506 5/32 -lOOVAL SMl 1-4505 4508 3/16 1/4 45010 5/16Squeezer Sets For AN450 Tubular Rivets SHANK SIZESAN450 .187 .250 .312 .375 \"l\" Dim. TYPE SM200 SM 220 SM240 SM 260 1/4\" SM 201 SM 221 SM 241 SM 261 3/8\" SM 202 SM222 SM262 1/2\" SM 203 SM 223 SM 242 SM 263 5/8\" SM 204 SM 224 SM 264 3/4\" SM 205 SM 225 SM 243 SM 265 Specify SM 244 SM 245 Example: To order 1/8\" Anvil x .250 Shank x 1/2\" Body length Specify: SM222-4 OVAL Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 22

Dimple Tools-Squeezer Type for 100· Rivets CAN426) L=1 RIVET SIZESSHANK 1/16 4262 3/32 4263 1/8 4264 5/32 4265 3/16 4266 4268 1/4 For 100\" Screws CAN509J Punch Die RIVET SIZES .117 .250 .a12 ''°L\"Dlon. .187 .2SO ' .a12 #8 5095 #10 5096SMP 211 SMP 231 SMP 251 1/4\" SMD 211 SMD 231 SMD 251 1/4 5098SMP212 SMP 232 SMP 252 3/8\" SMD 212 SMD 232 SMD 252 5/16SMP213 SMP 233 SMP 253 1/2\" SMD 213 SMD 233 SMD 253 50910 Example: To order .250 Shank x 3/8 B.L. x 1/8 AN426 100· Punch Specify: SMP 232-4264 SWivel Dimpling Tools~----31/2-------·~---:TI----.JJlr/fa PUNCH TYPE For 100° Rivets (AN426J DIE TYPE SM10SP· SM10SD· RIVET SIZES 1/16 4262 3132 4263 1/8 4264 5/32 4265 3116 4266 oooExample: To order 31/2 Long x 1As AN 426 1 punch Specify SMIOSP-4264 Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 23

Huck & High-Shear Collar Removers Hand-Type ChiselPart No. Rivet Stock A±010 8 c DSMHSC-4 1/8 1/2 .136 9/16 .083 5% Can be furnished with a 1o·SMHSC-5 5/32 1/2 .167 9/16 .104 5V2SMHSC-6 3/16 11/16 .125 6Y2 bend near the chisel edge.SMHSC-8 1/4 5/8 ~199 13/16 .165 7 When ordering. specify as anSMHSC-10 5/16 3/4 7/8 .206 7 SMHSCB.SMHSC-12 3/8 3/4 .259 7/8 .248 7 3/4 .321 Prices on application. .384 ---GL-u-e-~n~-T~r~y-.p5-1t'-/!2-_l\"·eC----h-'-is--~·e-~l-~i-~<7--~-1~-~-3-Jt-.4'.,=CQ) Part No. Rivet ~ \"A\"-+ooooo1 8 cSMHSC401-4 1/8 .125 3/4 1/2 Can be furnished with a 10°SMHSC401-5 bend near the chisel edge.SMHSC-401-6 .5/32 .156 3/4 1/2 When ordering specify os onSMHSC-401-8 3/16 .187 3/4 5/8 SMHSC401B.SMHSC-401-10 1/4 .250 3/4 5/8SMHSC-401-12 5/16 .312 3/4 5/8 Prices upon request. 3/8 .375 7/8 3/4 Can be furnished with a .498 shank in all rivet siz:es except 1/8 and 5/32. Prices upon application. Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 24

Huck & High-Shear Collar Remover~' Special Gun-Type \ 7112 .401 SHANK PART NO. RIVETSET SMH-SllHS-S lil32 SMH-sMHs-& 3116 SMH-SllHs-8 114 SMH-SllHS-10 5116 SMH-SllHS-12 318 • In Swivel Type Flush Sets ,,... I I \L______..I0',____,.-- . . . - - - ' PART NO. SHANK DIA.D L SM180 .401 314• 3• SM181 .401 1 3116\" 3• SM182 3• SM183 ••.498 314• 3• SM185 ••.401 13116\" SM186 SHANK ONLY -- SM187 CAP ONLY SHANK ONLY SM188 CAP ONLY - SM189 SPECIFY 314• 13116\" - SPECIFY SPECIFY Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 25

0,.. Hand Rivet Sets ~ I ::: I l . ,•Example: .S\"T6 order- 1/8\" AN 470 CUPPINGS 1/16 3/32 111 5/32 3116Specify: SMHR-4704 Round-AN 430 4302 4303 4304 4305 4306 4422 4423 4424 4426 -I Flat-AN442 4552 4425 4562 4553 4554 4555 4556 I Brazier-AN 455 4702 4563. 4564 4565 I Mod. Brazier-AN 456 4703 4704 4705 4566 Universal-AN 470 4352 4354 4706 I Round-AN 435 4353 4355 4356 I~I IUTlON I \"TEE\" Pins I ~IB - Part No. A-+.o.oooooso 1±1/64 :I ~ 11-A SMTP-6 .1875 1'¥1\" SMTP-8 .2500 2\" •[ D SMTP-10 · .3125 2¥2\" ! SMTP-12 .3750 .3y,\" ~ SMTP-16 .5000 4\" Rivet Set ExtensionL 0.401 ~ t~:::Jf , 8\" .. -I .-r1.. ] I SM401 E I Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 26

Flat Chisel for Pneumatic GunsPart No. Shanie (D) Let19th (L)SM 451 .401\" 5~\"SM 454 .498\" 5~\"Above sets can be furnished with grooved shoulder for \"Beehive\" retainer spring Prices on request SM 9111-11\"1.1..9-- - - 6~--~1I ::ilr-.401 -l,---/·f~t-----...J.L-----·T 119 DIA. _J SM 912 ~ c= IJ( :] 5~jJJ__ ~r -.401 (Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 27

Flush Setswith. Aluminum, Brass or Plastic Face..,..___._ _ _ _ 3Y2 -----~, --.'1 .... ...----.._·__.___ _j_1\" FACEPART NO. SHANK HEADSM50·1A .401 ALUM•SM70-1A .498 ALUM•SM50·1B .401 BRASS• SM70·1B .498 BRASSSM50-1P .401 PLASTICSM70·1P .498 PLASTIC .Replacement HeadsPart No. Head Type - -lA Aluminum -1 B Brass Plastic -1 pSchaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 28

\"C\" Y.okes for use with Portable Squeezers SMCY-3 REACH~ GAP SMCY-27I1Y2\" REACH 1 Y4 II GAP I2 Ya\" REACH 1 Ya\" GAP for use with I for use with CP-214C I CP351C I CLEC0-41C 0I CLECO-A81C THOR PRS12 0 I I THOR PRS-1Send for our Free literature SMCY-40 SMCY-27 can be furnishedon the complete range of for use with our Threadedyokes that can be supplied I2Ya\" REACH ~%\"GAP Dollies illustrated on page 15to fill your particular needs. of this catalog. for use with CP-355t..:; J4 Transfer Punches ~ Part Number SMDP (Dash No. J ..._L_--..._-_.-:_-:_-:_-:_-:_-:_-=_-3-Yi-------------------------__,-..,~l-· _,.Dash No. -20 -22 -24 -26 -21 --30 -2 -4 -6 -10 -12 -14 -16Drill Size 3/32 #40 1/8 #30 5/32 #19 3/16 ;! 10 7/32 1/4 5/16 3/8 7/16 1/2 9/16\"L\" Dim. 1/4 1/4 3/8 3/8 1/2 1/2 1/2 1/2 1/2 1/2 1/2 1/2 5/8 5/8 5/8 Available from stock in sizes listed above. Can be furnished in additional sizes-Prices upon request. Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 29

Bucking Bars SMBB-2 Weight: 2 lbs.Weight: 1 31.. lbs. SMBB-1 SMBB-6Weight: 2 lbs. Weight: 1 lb.SMBB-14 SMBB-9Weight: 1 lb. Weight: 3/.i lb.Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 30

U·niversal Type Bucking Dollyp_____t IA___) Part No. A BcD E FG--IE I--- o--~ SMBD-1 V2 1 SMBD-2 5\" 2 3f. 2 % 31. 1 y.. SMBD-3 6\" 2Y2 1 2Yz 31. 1 1 Y2 7\" 3 1'h 3 1. _ _ _-lrTa ..-------..~ When ordered as above, Dollies will be furnished plain, as illustrated. Can also be furnished for use with Squeezers and Adapters with the various shank holes added in the areas indicated by the dotted lines. Please specify shank size desired. Prices upon request. Bucking Bars SMBB-15 SMBB-16 RH ISHOWNJ SMBB-16 LH (OPP.)Weight: 2Y2 lbs. Weight: 1 lb. SMBB-10 SMBB-11 Weight: 1 V2 lbs.Weight: 1 Y2 lbs.Schaefer Machine Company• Tel. 516.248.6880 •Fax. 516.747.2227 31