NBCONTROLSINGLE FUNCTION CONTROLA durable chrome finish control with stainless steel lever arms, suitable for exposed installations.Controls with throttle lever have a twist grip throttle brake to handle larger diesel mechanism throttle/governor loads. Suits inboards with hydraulic gearbox, stern drives and outboards.FEATURES• One function, one or two levers• One handle for gear, one handle for throttle• Available as throttle only, or gear and throttle, or twin throttle• The throttle brake is simply applied by twisting the lever once the desired setting has been established• Detents for forward/neutral/reverse incorporated in gear controls• Can be used for dual station installations, where both stations move together, although care must be taken to avoid operating one station if the other throttle is firmly dampened down• Especially suitable for engines with heavy governor load (ie. Gardner diesel)CABLESAccepts 3 & 4 Series (Refer Page's 6 & 7 ) Cables. Fittings for these cables are supplied withcontrol.MATERIALS• Marine quality chrome plated• Die cast zinc alloy housing• Stainless steel lever arms• Die cast zinc alloy internal rocker arm 138 90 R225 267Code Description 150 147NB0124 NB Single control (Red with brake) NB0239NB0239 NB Twin control ( Red & Black )Other controls available upon request 112 51
D SERIESCONTROL & CABLES‘D’ Series Side Mount ControlSingle Function Control:These controls are used in heavy duty applications with a maximum load of up to 50kg force. They are also usefulwherelong travel is required, e.g. marine jet bucket control.Features:• Can be mounted left-hand or right-hand• Rotary drive mechanism gives 225mm (9\") travel over 230˚ handle movement• Suits mechanical marine gearboxes• Suits most marine jet units, e.g. Hamilton reverse bucketCable:• Accepts D0499 only Code Description D0002 D Series Control D0499 D series Cable - XXXX Where XXXX is overall length in cm52
CANTRAK - MEASURE, DISPLAY, STORE PROCESS, TRANSMIT DATA CANtracl 800 Series CANtracl GEM 320 Series The CANtrak has established a standard for intelligent, multi-function displays. The ideal man-machine interface, it is easily configured via the application of user-friendly software, to measure, display, store, process and transmit data. FEATURES • Graphical high resolution FSTN LCD • Rugged ABS case • IP67/ NEMA protection rating • Low operating temperature range • Data logging/diagnostics and control capability • Contrast control/variable backlighting • Internal sounder • Multiple accessed screens via illuminated soft-keys • The display is RS232, RS485 and CANbus datalink compatible • Front mountable • Integral Deutsch 12 way connector • Internal 500mA open collector output driver (possibly for external output alarm) • Front cover (optional) • CE Approved designGENERIC ENGINE MONITORING FOR J1939/J1587 ENGINES Generic Engine Monitor (GEM) CANtrak displays transmitted J1939 and J1587 engine and transmission data, active and stored alarms where supported, plus is a trip and fuel computer. The GEM application runs on the renowned CANtrak robust industrial graphical displays. The GEM offers user selectable icon based display layouts as well as including a comprehensive multi language text based fault warning and acknowledgement system. 53
Delivering Global Solutions for Fluid Level IndicatorsProduct Push 2 Seal Fluid Level IndicatorGeneral Product for Market T-Handle (Special Order) Status Globally Other Colors (Special Order) Availability Pull Ring (Standard) Debris Skirt Appearance Other Seals (Special Order) Yellow Color (Standard) Seal ISO Oil Can Graphic Recommended Size Metric NBR O-Ring (Basic – Seal) P1 – 2.0Size Range Tube I.D Range P1 – 2.4 Basic P1 – 2.5 Imperial (Inch) Metric (mm) P1 – 3.0 P1 Series P2 – 2.0 0.320 – 0.345 8.13 – 8.76 P2 – 2.4 P2 Series P2 – 2.5 0.340 – 0.370 8.63 – 9.40 P2 – 3.0 P3 Series P3 – 2.0 0.355 – 0.380 9.00 – 9.65 P3 – 2.4 P3 – 2.5 0.375 – 0.400 9.53 – 10.16 P3 – 3.0 0.400 – 0.425 10.16 – 10.80 0.420 – 0.445 10.67 – 11.30 0.430 – 0.455 10.92 – 11.56 0.450 – 0.475 11.43 – 12.07 0.465 – 0.490 11.81 – 12.45 0.480 – 0.505 12.19 – 12.83 0.500 – 0.525 12.70 – 13.34 0.520 – 0.555 13.21 – 14.10Mechanical PropertiesTensile Strength (Pull Ring to Blade/Zinc Connector)-40°F (-40°C): min. 250lbf, 113kgf+75°F (+24°C): min. 225lbf, 100kgf+225°F (+108°C): min. 180lbf, 82kgfSide Loading (Pull Ring to Blade at 8”/200mm)+75°F (+24°C): min. 30lbf, 14kgfTypical Part Weight: 0.02-0.025lb, 8-12gPerformance 54
Credit Account Application Form To Be completed and submitted along with at least 3 trade references [email protected] NAME: .........................................................................................................................................................POSTAL ADDRESS: ............................................. DELIVERY ADDRESS: .................................................................................................................................. ......................................................................................................................................................................... ........................................................................................TELEPHONE: ........................................................ FAX: ..............................................................................EMAIL: ............................................................................................................................................................................PREFERRED FREIGHT METHOD ................................................................................................................................ACCOUNT NUMBER (if known) ....................................................................................................................................TYPE OF BUSINESS:.......................................................... YEARS OPERATING: ..................................................LEGAL ENTITY: Company Individual Partnership Corporate Trustee(Please Circle) Trust Club/Assoc. ABN: ......................................................................COMPANY NAME: ..........................................................DIRECTORS NAMES: ..................................................... .................................................................................ADDRESSES: .................................................................. .................................................................................PROPRIETOR'S NAMES: ............................................... .................................................................................ADDRESSES: .................................................................. .................................................................................REFERENCES At least 3 suppliers, no dealershipsSUPPLIERS 1) ................................................................ Contact .......................................................................Phone No .......................................................................... Fax No .......................................................................Address .......................................................................... email .......................................................................SUPPLIERS 2) ................................................................ Contact .......................................................................Phone No .......................................................................... Fax No .......................................................................Address .......................................................................... email .......................................................................SUPPLIERS 3) ................................................................ Contact .......................................................................Phone No .......................................................................... Fax No .......................................................................Address .......................................................................... email ....................................................................... TERMS AND CONDITIONS PART (A)I/We hereby request that an account be opened to facilitate the sale of goods/services on credit to the legal entityindicated on this application. It is agreed that I/we will be answerable and responsible to you for the due payment forall such goods/services as you have supplied and may from time to time supply to it. This agreement shall be acontinuing guarantee to you for all debts whatsoever and whenever contracted with you in respect of goods/servicessupplied and to be supplied.TERMS: STRICTLY 30 DAYS FROM END OF MONTH. ACCOUNTS ARE PLACED ON AUTOMATIC STOP CREDIT AT 45 DAYS FROM END OF MONTH.I/WE hereby agree that all stock supplied remains the property of Control Connections until payment is made in full.Accounts that remain unpaid will be forwarded to our collection agency for processing. Under the “Terms of Trade” ofthis practice, fees and charges incurred by the collection agency will be added to the balance of this account.It is acknowledged that I/we have read the above Part (A) and attached Part (B) terms and conditions of Control Connections and hereby agree to abide by them.SIGNED: .......................................................................... SIGNED: ................................................................PRINT NAME: .................................................................. PRINT NAME: .......................................................DATED: ............................................................................ DATED: .................................................................* To be signed by the proprietor/s of the business 55
TERMS AND CONDITIONS OF SALE PART (B)CREDIT TERMSAt CONTROL CONNECTIONS sole discretion payment shall be due on delivery of the Products ; or payment shall be duebefore delivery of the Products. Payment for the Products sold by CONTROL CONNECTIONS to approved account Customersshall be tendered no later than the expiration of 30 days from the end of the month sold.All payment terms are based on the date of the invoice and not the date Products are received.Any variation of these payment terms shall be in writing and signed on behalf of CONTROL CONNECTIONS by a partner ofCONTROL CONNECTIONS.A charge of 2.5% per month, calculated on a daily basis, may be applied on all overdue accounts. The charge will accrue untilall overdue amounts are paid. The customer hereby acknowledges and agrees that this rate and the amount chargeable are agenuine pre-estimate of the minimum loss and liquidated damages which will be sustained by CONTROL CONNECTIONS inthe event of non-payment in accordance with these Conditions and the rate of interest and amount chargeable are not a penalty. Any discount given is subject to the account being kept in order and within the requirements of this clause.In the event that the Customer ’s payment is dishonoured for any reason the Customer shall be liable for any dishonour feesincurred by CONTROL CONNECTIONS.If the Customer defaults in payment of any invoice when due, the Customer shall indemnify CONTROL CONNECTIONS fromand against all costs and disburse- ments incurred by CONTROL CONNECTIONS in pursuing the debt including legal costs ona solicitor and own client basis and CONTROL CONNECTIONS collec- tion agency costs.WARRANTYCONTROL CONNECTIONS warrants all products pursuant to a sale agreement hereunder for one year from the date ofshipment to the customer against defective material or workmanship (but not against damage caused by accident or abuse )when such products are used on equipment within the specification limits approved. CONTROL CONNECTIONS will at its solediscretion repair or replace such products free of charge if found on examination by it to be defective, provided any neces- saryreturn charges are prepaid . Our guarantee only covers faulty material and workmanship but not faults caused by incorrectfitting or improper use of our equip- ment.CONTROL CONNECTIONS will not under any circumstances be liable to the Customer or any other person or entity related toor associated with the Customer for direct, indirect, consequential or incidental loss, costs, damages or expenses of whatevernature (including but not limited to loss of profits, loss of savings or other incidental or consequential damages) arising out of orrelating to the Products or the sale, use or inability to use the Products or for any other cause of whatever nature including anydefects in the Products.The Company, makes no warranty or representation in relation to the Products (unless set out in writing by the Company)whether express or implied as to their state, quality or merchantability.These warranties will not be read or applied so as to purport to exclude, restrict or modify provisions of Part V of the TradePractices Act 1974 or by any other statute, act or law of any State of Territory of the Commonwealth of Australia which by lawcannot be excluded, restricted or modified.SHIPMENTSAll shipments are made FOB at CONTROL CONNECTIONS premises or such other place as CONTROL CONNECTIONS mayapprove. Full risk of loss (including transportation delays and losses) shall pass to the customer upon delivery of the products atthe FOB point. Shipments will be made according to CONTROL CON- NECTIONS best judgement unless the Customer givesCONTROL CONNECTIONS prior written notice of the method by which the Products are to be shipped. Any payment of freightby CONTROL CONNECTIONS will not prejudice the conditions set out above.CLAIMSClaims for shortages/defects will not be recognised unless advised to CONTROL CONNECTIONS within 7 days of delivery.If the Customer does not give notice within time, the Customer waives and relinquishes all and any claims and causes of actionit has or may have had against CON- TROL CONNECTIONS in respect of those Products.RETURNED GOODS POLICYAcceptance of returned Products is at the absolute discretion of CONTROL CONNECTIONS and in any event:-All returned Products must be freight pre-paid and advised to CONTROL CONNECTIONS prior to return.Products being returned for credit must be on CONTROL CONNECTIONS normal stocking list. Special “Buy-in’ or manufactured products will NOT be accepted for credit.Where Products returned are in their original condition, a 15% handling and restocking charge will be incurred with a minimumof $15.00.Invoice number and/or delivery docket numbers must be quoted when returning ProductsCANCELLATIONOrders accepted by CONTROL CONNECTIONS cannot be countermanded or delivery deferred or goods returned except withthe written consent of CONTROL CONNECTIONS and upon terms that reimburse and indemnify CONTROL CONNECTIONSagainst all loss including cartage, bank charges and other incidental expenses on any part of the order that is cancelled.Cancellation of orders for Products made to the Customer’s specifications or non-stocklist items will definitely not be acceptedonce production/ordering has com- menced. 56
RETENTION OF TITLEThe Customer agrees that goods supplied shall remain the sole and absolute property of CONTROL CONNECTIONS as legal and beneficialowner until such time as the Customer shall have paid the purchase price of such goods . Until such payment the Customer will hold thegoods as bailee for and one behalf of CONTROL CONNECTIONS . The Customer must store and maintain the Products separately andapart from all or any other products or items of stock presently stored, or held by it as bailee. All payments the Customer may receive for thesale of the Products will be held in trust for CONTROL CONNECTIONS pending payment thereof. In the event the Customer fails to pay for goods the Customer irrevocably gives CONTROL CONNECTIONS its servants and agents leave and licence without the necessity of giving any notice to enter at any time on and into any premises occupied by the Customer to inspect search for or remove any of the goods supplied pursuant to these terms and conditions. PERSONAL PROPERTIES AND SECURITIES ACT 2009 (PPSA) In this clause financing statement, financing change statement, security agreement, and security interest has the meaning given to it by the PPSA. Upon assenting to these terms and conditions in writing the Customer acknowledges and agrees that these terms and conditions constitute a security agreement for the purposes of the PPSA and creates a security interest in all Goods that have previously been supplied and that will be supplied in the future by CONTROL CONNECTIONS to the Customer. The Customer undertakes to: a) promptly sign any further documents and/or provide any further information (such information to be complete, accurate and up-to-date in all respects) which CONTROL CONNECTIONS may reasonably require to; register a financing statement or financing change statement in relation to a security interest on the Personal Property Securities Register; ii) register any other document required to be registered by the PPSA; or iii) correct a defect in a statement referred to in clause 7.3(a)(i) or 7.3(a)(ii); b) indemnify, and upon demand reimburse, CONTROL CONNECTIONS for all expenses incurred in registering a financing statement or financing change state- ment on the Personal Property Securities Register established by the PPSA or releasing any Goods charged thereby; c) not register a financing change statement in respect of a security interest without the prior written consent of CONTROL CONNECTIONS; d) not register, or permit to be registered, a financing statement or a financing change statement in relation to the Goods in favour of a third party without the prior written consent of CONTROL CONNECTIONS; e) immediately advise CONTROL CONNECTIONS of any material change in its business practices of selling the Goods which would result in a change in the nature of proceeds derived from such sales. CONTROL CONNECTIONS and the Customer agree that sections 96, 115 and 125 of the PPSA do not apply to the security agreement created by these terms and conditions. The Customer waives their rights to receive notices under sections 95, 118, 121(4), 130, 132(3)(d) and 132(4) of the PPSA. The Customer waives their rights as a grantor and/or a debtor under sections 142 and 143 of the PPSA. Unless otherwise agreed to in writing by CONTROL CONNECTIONS, the Customer waives their right to receive a verification statement in accordance with sec- tion 157 of the PPSA. The Customer must unconditionally ratify any actions taken by CONTROL CONNECTIONS under clauses 7.3 to 7.5. Subject to any express provisions to the contrary nothing in these terms and conditions is intended to have the effect of contracting out of any of the provisions of the PPSA. GENERAL Any terms and conditions on a Customer 's order which are inconsistent with or additional to the terms and conditions hereof shall not be binding on CONTROL CONNECTIONS . All such terms and conditions are hereby expressly rejected. No waiver, alteration or modification of any CONTROL CONNECTIONS terms and conditions shall be binding on CONTROL CONNECTIONS unless made in writing and agreed to by a duly authorised official of CONTROL CONNECTIONS. Any order placed or made by the Customer for the purchase of Products shall be irrevocable and constitute an unqualified acceptance by the Customer of these conditions. Any time or date named or accepted by Company for delivery of the Products is an estimate only and does not constitute a condition of the contract or warranty. CONTROL CONNECTIONS delay or failure to exercise any right, power or privilege will not operate as a waiver of any such right, power or privilege.These conditions will be governed with the law in force in the State of Queensland and any applicable Federal Legislation and the partieshereby submit to the non-exclusive jurisdiction of the Courts of Queensland and to any Federal Courts.If any terms in these conditions shall for any reason be declared or become unenforceable, invalid or illegal for any reason, the other termsand provisions of these conditions shall remain in full force and effect as if these conditions never included the unenforceable, invalid orillegal terms. 57
Working Hand in Hand with the Global .Brisbane Leaders in motion control systems .Sydney.Locations . MelbourneServicing:AustraliaNew ZealandSouth East Asia
Search
