• Advanced easy-to-use Beckhoff PLC control system BA 6LABEL MACHINES • Touch screen 7’’ or 15’’ operator panel D • OCT Single-cable Servo Motors C • Input Full, Output Full and all sensors in the machine report on the screen when there is 51 an error • Reporting servo motor temperatures and powers on the screen • OP System: Over power protection due to wrong setting • CFR 21 PART 11 Requirements (Optional) • Audit trail ,Data integrity (Optional) • All Controls On-Screen Thanks to Analog Cards • Aluminum Structure • Labeling module with X-Y-Z axis (three-way) adjustable • Adjustable start photocell from the screen with offset adjustment • Photocell selection suitable for packaging • Photocell selection suitable for the label • Setting label offset • Rewind system suitable for high speeds • Maximum label slip (±1mm) • Automatic label size recognition and automatic correction of errors • Sensors (photocell) used on the machine SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All reducers used on the machine are Bonfiglioli • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-ETK-A04 1500 1500 2000 950±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected]
7SLEEVE MACHINES M-SLV-A02 HIGH CAPACITY BECHOFF SLEEVE MACHINE System Linear Automatic Sleeve Fast and easy Multifunctional, Working Principle Non-stop running Feeding System setting Easily Adjustable, Construction Chassis is steel, all visible surfaces are AISI 304 quality stainless and anodized. Screen Design Control unit Beckhoff Packaging Plastic, glass, metal Easy Integration Packing diameter 35-130mm With Other Machines Packing height 40-300mm Sleeve Pet,Pvc Sleeve thickness 30μ-70μ Sleeve height 35mm-300mm Sleeve roll inner diameter 127mm Sleeve roll outer diameter 500mm Blade cutting diameters 35-55 / 55-105 / 105-130mm (Only one option is available on the machine) Error rate ± 0,8 Electricity requirement 380V,50Hz,3 Phase Air requirement 6-8 bar Energy consumption 4kW Air consumption 300 lt/min Weight ~900kg Capacity Two different models are produced as 200 and 400 BPM capacities in 100mm. ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 52
SLEEVE MACHINES 7 • Advanced easy-to-use Beckhoff brand PLC control system 2335,20D A • Touch screen 15” operator panel • An easy-to-change double-coil magazine is used for sleeve feeding. When the sleeve decreases, the 2606,30 machine speed slows down. After the change, acceleration is achieved with a single button. E • Machine height adjustment with automatic motor control • Hourly capacity can be changed at the time of operation and the machine will automatically change 992,01 sleeve pulling speed, blade cutting speed, throwing speed, conveyor speed, separator (helical) speed, 1300 sensor sensing distance according to the target capacity. • Infinitely variable speed helical sorter C • SERVO motor driven rotary steel blade set with high cutting speed, easy to change • SERVO motor driven sleeve pulling rollers 1235B • SERVO motor driven sleeve take-up rollers • Tension system to facilitate sleeve flow Model A (mm) B (mm) C (mm) D (mm) E (mm) • Automatic sleeve feeding system from roll M-SLV-A02 2650 1250 1350 2250 950±50 • Easy change in a short time and easy recall of parameters from PLC memory according to different packages • The feature of not working when the inlet is empty, the outlet is full and there is no packaging • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors (photocell) used on the machine SICK, KEYENCE • Pneumatic materials used on the machine SMC,FESTO • All gearboxes used on the machine are Bonfiglioli • Easy format change in a short time • Ease of maintenance and service ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 53
7SLEEVE MACHINES M-SLV-A03 DUAL FEED BODY SLEEVE MACHINE System Linear Automatic Sleeve Fast and easy Working Principle Non-stop running Feeding System setting Construction Chassis is steel, all visible surfaces are AISI 304 quality stainless and anodized. Control unit Beckhoff Packaging Plastic, glass, metal Packing diameter 35-130mm Packing height 40-300mm Sleeve Pet, Pvc Sleeve thickness 30μ-70μ Sleeve height 35mm-300mm Sleeve roll inner diameter 127mm Sleeve roll outer diameter 500mm Blade cutting diameters 35-55 / 55-105 / 105-130mm (Only one option is available on the machine) Error rate ± 0,8 Electricity requirement 380V, 50Hz, 3 Phase Air requirement 6-8 bar Energy consumption 8 kW Air consumption 300lt/min Weight ~1500kg Capacity Up to 1000 BPM at 100mm ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 54
SLEEVE MACHINES 7 • Advanced easy-to-use Beckhoff brand PLC control system BA C • Touch screen 15” operator panel • An easy-to-change double-coil magazine is used for sleeve feeding. When the sleeve decreases, Model A (mm) B (mm) C (mm) M-SLV-A03 2250 1650 6000 the machine speed slows down. After the change, acceleration is achieved with a single button. • Machine height adjustment with automatic motor control • Hourly capacity can be changed at the time of operation and the machine will automatically change sleeve pulling speed, blade cutting speed, throwing speed, conveyor speed, separator (helical) speed, sensor sensing distance according to the target capacity. • Infinitely variable speed helical sorter • SERVO motor driven rotary steel blade set with high cutting speed, easy to change • SERVO motor driven sleeve pulling rollers • SERVO motor driven sleeve take-up rollers • Tension system to facilitate sleeve flow • Automatic sleeve feeding system from roll • Easy change in a short time and easy recall of parameters from PLC memory according to dif- ferent packages • The feature of not working when the inlet is empty, the outlet is full and there is no packaging. • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors (photocell) used on the machine SICK, KEYENCE • Pneumatic materials used on the machine SMC,FESTO • All gearboxes used on the machine are Bonfiglioli • Easy format change in a short time • Ease of maintenance and service ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 55
7SLEEVE MACHINES M-SLV-A01 LOW CAPACITY BODY SLEEVE MACHINE System Linear Multifunctional, Automatic Sleeve Working Principle Non-stop running Easily Adjustable, Feeding System Construction Chassis is steel, all visible surfaces are AISI 304 quality stainless and anodized. Screen Design Control unit Omron Packaging Plastic, glass, metal Fast and easy Packing diameter 35-130mm setting Packing height 40-300mm Sleeve Pet,Pvc Easy Integration Sleeve thickness 30μ-70μ With Other Machines Sleeve height 35mm-300mm Sleeve roll inner diameter 127mm Sleeve roll outer diameter 400mm Blade cutting diameters 35-55 / 55-105 / 105-130mm (Only one option is available on the machine) Error rate ± 0,8 Electricity requirement 380V,50Hz,3 Phase Air requirement 6-8 bar Energy consumption 4kW Air consumption 300lt/min Weight ~600kg Capacity Up to 200 BPM at 100mm ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 56
SLEEVE MACHINES 7 • Advanced easy-to-use Omron brand PLC control system BAC • Touch screen 7’’ operator panel D • Infinitely variable speed helical sorter • SERVO motor driven rotary steel blade set with high cutting speed, easy to change • SERVO motor driven sleeve pulling rollers • SERVO motor driven sleeve take-up rollers • Air blower fan system that facilitates sleeve flow • Easy change in a short time and easy recall of parameters from PLC memory according to different packages • The feature of not working when the inlet is empty, the outlet is full and there is no packaging • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All gearboxes used on the machine are Bonfiglioli • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-SLV-A01 2150 1400 1300 950±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 57
7SHRINK NECK BANDING MACHINE M-SLVD-A01 SHRINK NECK BANDING MACHINE System Linear Multifunctional, Automatic Sleeve Working Principle Non-stop running Easily Adjustable, Feeding System Construction Chassis is steel, all visible surfaces are AISI 304 quality stainless and anodized. Screen Design Control unit Omron Packaging Plastic, glass, metal Easy Integration Packing diameter 30-80mm With Other Machines Packing height max : 300mm Sleeve Pet,Pvc Sleeve thickness 40μ-80μ Sleeve height 50-140mm (folded) Sleeve roll inner diameter 30-60mm Sleeve roll outer diameter 127mm Blade cutting diameters 400mm Error rate ± 0,8 Electricity requirement 220V, 50Hz, single phase Air requirement 6-8 bar Energy consumption 1.1kW Air consumption 200lt/min Weight ~900 kg Capacity It varies according to sleeve length and package diameter. ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 58
SHRINK NECK BANDING MACHINE 7 • Advanced easy-to-use Omron/Beckhoff PLC control system BAC • Touch screen Omron/Beckhoff 5/7” operator panel D • Machine height adjustment manual • Packing sorter star with adjustable speed • Easy-to-change pneumatic steel blade set with high cutting speed • SERVO motor driven sleeve pulling rollers • SERVO motor driven vacuum sleeve positioning • Electrostatic prevention and improved vacuuming system that facilitates sleeve flow • Automatic sleeve feeding system from roll • Easy change in a short time and easy recall of parameters from PLC memory according to packaging • The feature of not working when the inlet is empty, the outlet is full and there is no packaging • Quiet operation without using compressed air • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All gearboxes used on the machine are Bonfiglioli. • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-SLVD-A01 2000 1350 1300 950±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 59
8 STEAM TUNNELS M-TNL-A01 STEAM TUNNELS System Linear Fast Heating Process Working Principle Non-stop running Construction Chassis and all surfaces are AISI 304 quality stainless steel Fast and easy Easy Integration Packaging Glass, Plastic, PET, PE setting With Other Machines Packing diameter max:130mm Packing height Max:300mm Control unit Omron Steam Nozzle 4-6-8 Set (Optional according to capacity) Vapor Pressure 4 Bar (Vapor pressure used in the tunnel ≥ 2bar) Steam Inlet 1” Steam Usage 2-2.5 kg/min (depends on product features) Required Generator Power 85 kW(varies according to product specifications) Electricity requirement 220V, 50Hz Energy consumption 0,5kW Weight ~280kg Capacity It varies according to the product and packaging features. ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 60
• Conveyor system with automatic or manual speed adjustment BA 8STEAM TUNNELS • Synchronous operation with sleeve machine • 4-6-8 steam adjustment valves (Optional) D • 2 independently adjustable sections C • Steam is sucked in and removed from the system • More efficient working and quality surface is obtained compared to the resistance tunnel system. • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-TNL-A01 2100 1100 2600 950±50 M-TNL-A02 2100 1100 3200 950±50 M-TNL-A03 2100 1100 4200 950±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 61
9CARTONING MACHINE M-KTM-B01 HORIZONTAL CARTONING MACHINE System Linear Working Principle Non-stop running Construction Chassis is stainless steel, other visible surfaces are anodized aluminum Multifunctional, Easily Adjustable, Control unit Beckhoff Fast Boxing Process Screen Design Packaging Plastic, glass, metal Box width 30-80mm (Can be designed according to customer’s product) Easy Integration Box width 20-70mm (Can be designed according to customer’s product) With Other Machines Box height 50-200mm (Can be designed according to customer’s product) Electricity requirement 380V,50Hz,3 Phase Fast and easy Air requirement 6-8 bar setting Energy consumption 3kW Air consumption 200lt/min Weight ~1500kg Capacity 50-150 BPM (may vary depending on product and box.) ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 62
• Advanced easy-to-use Beckhoff brand PLC control system 9CARTONING MACHINE • Touch screen 15” operator panel • Working with Guk BA C • Motion Control 1 ms cycle time D • OCT Single-cable servo motors • Scada Display Model A (mm) B (mm) C (mm) D (mm) • Unlimited Recipes M-KTM-B01 1400 1550 4300 950±50 • Remote Access: the ability to access and interfere with machine screens from your desk or • being able to see the production quantities. • The feature of not working when the inlet is empty, the outlet is full and there is no packaging • Safety contact door and emergency stop • On-screen reporting of servo motor temperatures and powers • Automatic acceleration and deceleration according to the input product amount • OP System: Over power protection due to wrong setting, safe operation with torque control • Low electricity consumption and quiet operation thanks to variable conveyor speed • Thanks to analog cards, all controls are on the screen. • Fault display with graphics • Fault description in setting language • Graphically defined money for easy setting • meters • Box length and width change with a single mechanical adjustment • motorized box carrier • Box carriers with millimeter counters • Jog mode • Dry vacuum pump • Easy change in a short time and easy recall of parameters from PLC memory according to packaging • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All gearboxes used on the machine are Bonfiglioli. • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Easy format change in a short time • Ease of maintenance and service ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 63
9CARTONING MACHINE M-KTM-A01 VERTICAL CARTONING MACHINE System Linear Multifunctional, Fast Boxing Process Easy Integration Working Principle Stop Start or Non-Stop Easily Adjustable, With Other Machines Screen Design Construction Chassis is stainless, other visible surfaces are anodized aluminum Fast and easy Control unit Beckhoff setting Packaging Glass, Plastic, Metal Box width 22-120 mm (Can be designed according to customer’s product) Box width 20-60 mm (Can be designed according to customer’s product) Box height 70-200 mm (Can be designed according to customer’s product) Electricity requirement 380V,50Hz,3 Phase Air requirement 6-8 bar Energy consumption 3 kW Air consumption 200 lt/min Weight ~1100kg Capacity 50-60 BPM (depends on feeding) ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 64
9CARTONING MACHINE • Advanced easy-to-use Beckhoff brand PLC control system BA C • Touch screen 15” operator panel D • Working with Guk • Motion Control 1 ms cycle time Model A (mm) B (mm) C (mm) D (mm) • OCT Single-cable servo motors M-KTM-A01 1700 1800 4000 950±50 • Scada Display • Unlimited Recipes • Remote Access: the ability to access and interfere with machine screens from your desk or • being able to see the production quantities. • The feature of not working when the inlet is empty, the outlet is full and there is no packaging • Safety contact door and emergency stop • On-screen reporting of servo motor temperatures and powers • OP System: Over power protection due to wrong setting, safe operation with torque control • Low electricity consumption and quiet operation thanks to variable conveyor speed • Thanks to analog cards, all controls are on the screen. • Fault display with graphics • Fault description in setting language • Graphically defined parameters for easy adjustment • Box length and width change with a single mechanical adjustment • motorized box carrier • Box carriers with millimeter counters • jog mode • dry vacuum pump • Easy change in a short time and easy recall of parameters from PLC memory according to packaging • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All gearboxes used on the machine are Bonfiglioli. • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Easy format change in a short time • Ease of maintenance and service ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 65
10CASE PACKER MACHINES M-KAC-A01 CARTON OPENING MACHINE System Linear Working Principle Non-stop running Construction Chassis is aluminum, other visible surfaces are anodized aluminum Control unit Beckhoff Packaging RSC parcel Box width 300 mm (Can be designed according to customer’s product) Box length 400 mm (Can be designed according to customer’s product) Box height 350 mm (Can be designed according to customer’s product) Electricity requirement 380V, 50Hz, 3 Phase Air requirement 6-8 bar Energy consumption 1 kW Air consumption 800 lt/min Weight ~500kg Capacity 10-15 BPM ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 66
10CASE PACKER MACHINES • Advanced easy-to-use Beckhoff/Omron brand PLC control system BA C • Touch screen 7’’ operator panel or integrated into the cartoning machine • Manual size adjustment for different box sizes • Automatic, with box top cover closure • With side drag straps, Total of 2 • Drag belt speed 21 meters/minute • Top and Bottom K12 taping dispensers (K11 taping dispenser support is available) • Height adjustable aluminum feet between 480-820mm for working height • Speed regulator on top cover closing pistons • Gradual top cover closure with 2 pistons • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) M-KAC-A01 1400 1900 2200 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 67
10CASE PACKER MACHINES M-OKM-A01 BOTTLES CASE PACKING MACHINE System Linear Working Principle Step by Step Chassis is stainless steel, other surfaces are AISI 304 and anodized Construction aluminum Beckhoff Control unit Glass, Plastic, Metal Packaging 300 mm (Can be designed according to customer’s product) Packing width 400 mm (Can be designed according to customer’s product) Packing length 350 mm (Can be designed according to customer’s product) Packing height 380V, 50Hz, 3 Phase Electricity requirement 6-8 Bar Air requirement 4 kW Energy consumption 500 lt/min Air consumption ~1100kg Weight 10-15 BPM Capacity ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 68
10CASE PACKER MACHINES • Advanced easy-to-use Beckhoff PLC control system BA D • Touch screen 15” operator panel • Use of corrugated cardboard C • Boxing of packages of different sizes in the same machine • Easy mold change and fine adjustment • The bottle holder is in such a way that it will not damage the safety band. • Box counting system • Fault and fault point are displayed graphically on the digital screen. • Easy maintenance of pneumatic components • Infrastructure suitable for carrying with vacuum or gripper • Easy change in a short time and easy recall of parameters from PLC memory according to packaging • The feature of not working when the inlet is empty, the outlet is full and there is no packaging. • Quiet operation without using compressed air • Project specific vacuum generator • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All gearboxes used on the machine are Bonfiglioli. • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-OKM-A01 3200 1800 1500 950±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 69
10CASE PACKER MACHINES M-OKM-B01 CASE PACKER MACHİNE System Linear Working Principle Step by Step Chassis is stainless steel, other surfaces are AISI 304 and anodized Construction aluminum Beckhoff Control unit Glass, Plastic, Metal Packaging 320 mm (Can be designed according to customer’s product) Packing width 380 mm (Can be designed according to customer’s product) Packing length 250 mm (Can be designed according to customer’s product) Packing height 380V, 50Hz, 3 Phase Electricity requirement 6-8 Bar Air requirement 4 kW Energy consumption 500 lt/min Air consumption ~900kg Weight 10-15 BPM Capacity ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 70
10CASE PACKER MACHINES • Advanced easy-to-use Beckhoff PLC control system BA D • Touch screen 15” operator panel • Use of corrugated cardboard C • Boxing of packages of different sizes in the same machine • Easy mold change and fine adjustment • High speed box sorting system • Box counting system • Fault and fault point are displayed graphically on the digital screen. • Easy maintenance of pneumatic components • Variable multiple speed with servo motor • Easy change in a short time and easy recall of parameters from PLC memory according to packaging • The feature of not working when the inlet is empty, the outlet is full and there is no packaging. • Quiet operation without using compressed air • Transport system solutions suitable for the project • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All reducers used on the machine are Bonfiglioli. • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-OKM-B01 2300 2150 3000 950±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 71
10CASE PACKER MACHINES M-BUN-A01 BUNDLE System Linear B H Working Principle Step by Step ED Chassis is stainless steel, other visible surfaces are Construction AISI 304 and anodized aluminum C AF Beckhoff Control Unit Box Packaging 20-200 mm (Can be designed according to customer’s product) A dimension 12-85 mm (Can be designed according to customer’s product) B dimension 50-220 mm (Can be designed according to customer’s product) C dimension 85-520 mm (Can be designed according to customer’s product) D dimension 24-300 mm (Can be designed according to customer’s product) E dimension 50-220 mm (Can be designed according to customer’s product) F dimension 40-150 mm (Can be designed according to customer’s product) H dimension 4-6 Bar Air requirement 3.5 kW Energy consumption 300 lt/min Air consumption ~800kg Weight 20-25 BPM Capacity ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 72
10CASE PACKER MACHINES • Advanced easy-to-use Beckhoff brand PLC control system BA D • Touch screen 15” operator panel C • Extremely compact and easy to use design • Packing of packages of different sizes in the same machine • Easy blade change and adjustment • Ability to work at high speeds • Fault and fault point are displayed graphically on the digital screen. • Easy maintenance of pneumatic components • Variable multiple speed with servo motor • Easy change in a short time and easy recall of parameters from PLC memory according to packaging • The feature of not working when the inlet is empty, the outlet is full and there is no packaging. • Transport system solutions suitable for the project • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All reducers used on the machine are Bonfiglioli. • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) D (mm) M-OKM-B01 2000 1250 1800 1000±50 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 73
11 PALLETIZING MACHINES M-PAL-A01 PALLETIZING MACHINE System Linear Working Principle Step by Step Construction Chassis painted steel Control unit Beckhoff Packaging Carton Box width 300 mm (Can be designed according to customer’s product) Box length 400 mm (Can be designed according to customer’s product) Box height 350 mm (Can be designed according to customer’s product) Pallet dimensions 800x1200 , 1000x1200 mm Electricity requirement 380V,50Hz,3 Phase Air requirement 6-8 bar Energy consumption 4 kW Air consumption 600 lt/min Weight ~2500kg Capacity 10-15 BPM ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 74
• Advanced easy-to-use Beckhoff PLC control system 11PALLETIZING MACHINESBA • Touch screen 15” operator panel • Position identification with the remote C • Precise positioning in all axes with jog mode • Remote Access: the ability to access and interfere with machine screens from your desk or being able to see the production quantities • Safety barriers with high safety standards • Motion Control 1 ms cycle time • OCT Single-cable servo motors • Scada Display • Unlimited Recipes • Absolute Encoder Beckhoff Servo motors • Reporting servo motor temperatures and powers on the screen • OP System Over power protection due to wrong setting • Thanks to analog cards, all controls are on the screen. • Fault display with graphics • Fault definitions in the setting language • Log fault history • Closed enclosure in CE norms to ensure occupational safety and environmental cleanliness • Sensors used on the machine (photocell) SICK, KEYENCE • Pneumatic materials used on the machine SMC, FESTO • All reducers used on the machine are Bonfiglioli. • Easy format change in a short time • Ease of maintenance and service Model A (mm) B (mm) C (mm) M-PAL-A01 4400 2500 3200 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 75
12FEED AND COLLECTION TRAY M-DTT-A01 ve M-DTB-A01 ROTARY TRAY System Rotary Working Principle Non-stop running Construction Chassis is steel, all visible surfaces are AISI 304 quality stainless Packaging Glass, Plastic, PET, PE Control unit Omron Ambalaj çapı max:130mm Ambalaj yüksekliği Max:300mm Electricity requirement 220V, 50Hz Energy consumption 0,5kW Weight ~250kg Capacity Varies by packaging ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 76
FEED AND COLLECTION TRAY 12 • Adjustable speed via potentiometer A • Easy sync with other machines B • Extra strength stainless steel tray • High torque motor with gear reducer • Long life • Ease of maintenance Model A (mm) B (mm) R (mm) RR M-DTT-A01 1050 950±50 1000 M-DTB-A01 1050 950±50 1000 ELEKTROMAG │ +90 (212) 421 37 31 │ www.elektromag.com.tr - [email protected] 77
Center Office: Bağlariçi Cd. No:14 34230 Avcılar- İSTANBUL / TR USA Office : 3309 W Warner Ave, Santa Ana, Phone : +90 (212) 421 37 31 (Pbx) Fax : +90 (212) 676 10 09 CA 92704, USA Factory: Org. San. Böl. 3.cad. 15.sok. No:3 59500, Çerkezköy- TEKİRDAĞ Spain Office :Çakır Garcia S.L.U Distribuidor Oficial Phone : +90 (282) 726 13 14 (Pbx) Fax : +90 (282) 726 14 43 Espana / Portugal www.elektromag.com.tr - [email protected] PlasMag
Search
