BTV 4x4 Lift Kit Isuzu V-cross 7 inch english version

ISUZU V-CROSS 7\" Lift Kit Installation Instruction Volume 1/2019

9 10 1 2 4 11 13 11 3 65 87 12 BTV 4x4 LIFT KITS 1. FRONT CROSS MEMBER 8. SWAYBAR LINK KIT 2. REAR CROSS MEMBER 9. STRUCT SPACER 10. STRUCT SPACER 3. PASS KNUCKLE 11. REAR 7\" BLOCK 4. DRIVE KNUCKLE 12. REAR U BOLT 5.TRACK BAR AXLE BRACKET KIT 13. BRAKE LINE 6.TRACK BAR AXLE BRACKET KIT 7. SWAYBAR LINK KIT Page 1

Page 2

Page 3 A Tie rod `s cutting space A space of tie rod that you prefer to cut ≈ 1”

Installation 1. Put a <Front Cross Member> (1) 2. Put a <Rear Cross Member> (2) as a below picture. as a below picture. 3. Put a Strut Spacer (9) in the middle of original control arm’s mounting bracket. 4. Cut out an original rear beam’s fixer, make it equal with a new rear cross member 5. Put Track bar Axle bracket kit (5) and (6) as a below picture, Fix it with a car original rear axle. 56 Page 4

6. Put a sway bar link kit (7), (8) as a below picture. 78 7. Put a Drive Knuckle (3) and Pass Knuckle (4) on the left and right of axle. (As a below picture) 3 2 8. Put an original rubber bumper Page 5

9. Put a rear block (11) and rear U bolt (12) as a below picture 12 11 10. Put a Strut spacer (10) as a below picture 10 Page 6