Austco Tacera Products

Generic Callpoint Inserts Tacera» Changeable Inserts available in a number of standard AM-CPG-CP AM-CPG-LG AM-CPG-CP-T colours and icons for easy and fast identification AM-CPG-CC-T AM-CPG-SA AM-CPG-EM-T» Push and Back lit buttons available with horizontal and vertical text and icon order options AM-CPG-CN AM-CPG-SP AM-CPG-R» Hard-wearing and washable AM-CPG-Y AM-CPG-EM AM-CPG-CW Call Button Inserts AM-CPG-SP-T AM-CPG-B AM-CPG-CO Large and easy to activate, the Austco Call Button Inserts provide a positive tactile response when pressed. Callpoints are designed for changeable inserts in vertical or horizontal forms as shown in picture. The Call Button Insert design enables a facility to swap out and replace the current call button instead of needing to replace the whole callpoint. For example, if a facility had a Staff Assist Callpoint in a room and now wanted that callpoint to be an Emergency Callpoint, they simply swap out the staff Assist Insert button for an Emergency Call Insert and reconfigure to alert as an emergency call on the system when pressed. With this added flexibility and low maintenance feature the facility can work out which alerts need to be where long after the initial install. This helps to drive workflow efficiencies throughout their healthcare organisation thus increasing patient car Vertical Inserts AM-CPG-PC-T AM-CPG-CC AM-CPG-W AM-CPG-GAM-CPG-CR AM-CPG-CO-T AM-CPG-ME AM-CPG-O AM-CPG-CB-TAM-CPG-CW-T AM-CPG-SC AM-CPG-PC AM-CPG-CB AM-CPG-SA-TTo learn more about Austco products and solutions, visit Austcowww.austco.ca or call to speak to our experts about acommunications solution for your facility.

Generic Callpoint Inserts Horizontal InsertsAM-CPG-ME-H AM-CPG-CB-H AM-CPG-EM-H AM-CPG-R-H AM-CPG-CP-H AM-CPG-PC-T-HAM-CPG-CO-T-H AM-CPG-SA-T-H AM-CPG-CP-T-H AM-CPG-W-H AM-CPG-SC-H AM-CPG-SP-T-HAM-CPG-CC-T-H AM-CPG-CN-H AM-CPG-CR-H AM-CPG-PC-H AM-CPG-SP-H AM-CPG-CB-T-HAM-CPG-CW-H AM-CPG-CC-H AM-CPG-CO-H AM-CPG-Y-H AM-CPG-B-H AM-CPG-LG-H AM-CPG-G-H AM-CPG-O-H AM-CPG-CW-T-HAustco Compliance© 2013 Austco Marketing & Service (Canada) Ltd Designed to comply with:All rights are reserved. • UL 1069 Hospital Signaling and Nurse Call Equipment.Austco Marketing & Service (Canada) Ltd reserves the right to make • C-Tick Electromagnetic compatibility.changes in specifications and/or discontinue any product at any timewithout notice or obligation and will not be liable for any consequences • IEC 60601-1, UL 60601-1 and CAN/CSA C22.2 No. 601.1-M90: Medicalresulting from the use of this publication. electrical equipment - Part 1: General requirements for safety. • CE Mark of European Conformity. Manufactured in general accordance with the requirements of international quality assurance standard ISO9002.Product Code Description Order OptionsAM-CPG Generic Callpoint Insert Vertical *Note: AM-CPG-H - Horizontal refers to when ordering H - (Horizontal) the horizontal hanging callpoints. Normal vertical hanging callpoints do not have a (H) when orderingCanada Authorised Austco Reseller60 Granton Drive, Unit 6Richmond Hill Ontario L4B 2N6CANADA +1 905 731 1830 +1 905 731 1816www.austco.ca

ErgoPlus Patient Call Pendant»»Reassurance indication and large back-lit buttons Tacera»»Ergonomic all-in-one design that is easy to grip»»Embossed Braille characters for the visually impaired Large back-lit buttons»»Improved infection control Call Button»»Dip sterilizable (IP67) Non-slip caseErgoPlus Patient Call Pendant Anti-bacterial An ergonomically designed, easy-to-grip pendant for patients protection to activate calls on the Tacera Nurse Call System. The solid blue, water resistant case is non-slip and dip sterilizable, and AAuussttccoo is available with or without lighting controls. The soft touch buttons are recessed to avoid accidental activation. The entire pendant is manufactured from silicone rubber with an anti- bacterial additive for improved infection control. The pendant socket incorporates a pendant removal alarm, to ensure that the pendant is not inadvertently unplugged. It is suitable for use by left and right handed patients. The Nurse Call and light control buttons are large, backlit for ease of use at night and with Braille dots on the CALL button for easy identification by the visually impaired. The non-slip case and large linen clip on the cable ensure that the pendant does not slip off the bed and is always at hand for your patient.Easy to Identify and Use A simple patient pendant that provides your patient with a call button to activate calls on the Tacera Nurse Call System. It is available with or without patient control of lights. The unique shape and ergonomic design fits comfortably in your patient’s hand. Textured, colored, back-lit buttons avoid confusion and assist visually impaired patients, especially at night and in low light conditions.To learn more about Austco products and solutions, visitwww.austco.ca or call to speak to our experts about acommunications solution for your facility.

ErgoPlus Patient Call Pendant The buttons on the ErgoPlus Patient Call Pendant are easy to Technical Specifications activate and are suitable for use by the infirm or patients with manipulative disabilities. Feature Description Height 110mm Long Lasting Design Width 50mm Manufactured from silicone rubber, the solid blue case has Depth an all-in-one design that is robust and durable. The cable Weight 25mm is manufactured from multi-strand, double insulated, white Mounting Method PVC cable and includes a large, smooth plastic linen clip that, 165 grams together with the non-clip case, helps keep the pendant within Housing easy reach of your patient. Connectors Connects to any Tacera callpoint fitted with a Temperature 6.5mm pendant socket The easy release design of the moulded right-angle plug Humidity Range protects the callpoint socket, pendant plug and cable from Cable Anti-bacteria silicone case damage should the cable be placed under tension, such as moving the bed with the pendant still connected. 6.5mm stereo jackImproved Infection Control 0-50˚C 0-85% Non Condensing The pendant has an IP67 rating, allowing it to be dip sterilised for easy cleaning after patient use. The soft touch silicone 2m of 3-core multi-strand, double insulated, case and buttons have an anti-bacterial additive for improved white PVC cable with a plastic linen clip infection control. attachedLight Control Up to 2 lights can be controlled by the press on the left or right of the light control button. One press ON, second press OFF. A dual relay is used to control the lights.Austco Compliance© 2013 Austco Marketing & Service (Canada) Ltd Designed to comply with:All rights are reserved. • UL 1069 Hospital Signaling and Nurse Call Equipment. • C-Tick Electromagnetic compatibility.Austco Marketing & Service (Canada) Ltd reserves the right to make • IEC 60601-1, UL 60601-1 and CAN/CSA C22.2 No. 601.1-M90: Medicalchanges in specifications and/or discontinue any product at any timewithout notice or obligation and will not be liable for any consequences electrical equipment - Part 1: General requirements for safety.resulting from the use of this publication. • CE Mark of European Conformity. Manufactured in general accordance with the requirements ofProduct Code Description international quality assurance standard ISO9002.CP-PCP/xx Patient Call Pendant with Light Control, 2mCP-SCP/xx Patient Call Pendant, 2m Order Options Pendant/Handset Holder GB – (Green Button)CP-Holder OB – (Orange Button) Cable Length: For a 4m cable length, add /4M e.g. CP-PCP/xx/4MCanada Authorized Austco Reseller60 Granton Drive, Unit 6Richmond Hill Ontario L4B 2N6CANADA +1 905 731 1830 +1 905 731 1816www.austco.ca

IP Callpoint General»»Hard-wearing and washable (IP65 Rated) Tacera»»Anti-bacterial protection with Infection Control Anti-bacterial protection»»Fully Supervised Callpoint, with backlight Anti-bacterial protection»»Pendant Removal Alarm Optional 6.5mm Pendant Socket»»“Three Button Press” for Emergency Calls Bright reassurance LEDIP Callpoint General Optional 8 pin DIN Pendant Socket Large and easy to activate, the Austco silicon call button provides a for TV control positive tactile response when pressed. This makes it ideal for patient/ residents with restricted or limited movement. Austco Standard features include back lit buttons for night viewing by residents and patients, a reassurance LED and tone sounder for audibly or visually impaired patients, and call mute mode for cleaners. Callpoints are also available with changeable inserts as shown in picture. The call button insert design enables a facility to easily swap out and replace the current call button instead of having to replace the whole Callpoint. For example, if a facility had a Staff Assist Callpoint in a room and they wanted the Callpoint to be an Emergency Callpoint, they simply swap out the Staff Assist button for an Emergency Call button in the insert and reprogramme to alert as an emergency on the system when pressed. With this added flexibility and low maintenance feature the facility can work out which alerts need to be where long after the initial install to drive efficiencies throughout their organisation thus increasing patient care.Lower “Whole-of-Life” Costs IP Callpoints General are IPnet and feature plug-and-play functionality. They are connected in series using standard CAT5/6 cable that also provides POIPnet (Power Over IPnet). Each callpoint has a unique address and is supplied configured for immediate use. Once connected, the callpoint is quickly and easily assigned to a room using a browser, which simplifies the installation process and reduces the cost of installation and commissioning.To learn more about Austco products and solutions, visitwww.austco.ca or call to speak to our experts about acommunications solution for your facility.

IP Callpoint General The system continuously checks the functionality of each callpoint To avoid nuisance alarms during cleaning, the callpoint and will immediately notify staff if any problem is detected. Callpoints incorporates a cleaning mode. The cleaning time and date is are hot swappable, making maintenance a breeze, simply replace a logged on the central server, providing an important audit trail for callpoint and then use a browser to quickly configure the device. infection control compliance.Easy to Identify and Use Over Bed Indicator IP Callpoints General feature soft-touch push buttons that are clearly An over bed indicator can be added to display the call status. labelled with text or icons for easy and fast identification. The CALL button is available in a number of standard colors and icons, allowing Technical Specifications the system to operate a variety of alarm levels and system inputs as determined by the protocols of your facility. Feature Description Height 116mm (Australian/New Zealand Plate) The callpoint can be configured to allow active calls to be upgraded to a higher level by pressing the CALL button three times or holding it for Width 76mm (Australian/New Zealand Plate) three seconds. This feature can eliminate the need for separate staff Depth assist buttons thus further reducing infrastructure costs. 26mm (Standard) Weight 37mm (With pendant socket) All callpoints are available with an optional socket for a Call Pendant Mounting Method or Patient Entertainment Handset. Users can easily initiate a call by 70 grams pressing the CALL button on a plug-in pendant or the callpoint. Screw on All callpoints are connected on the Nurse Call LAN to all other components of the Tacera system to initiate communication between Plate Austco Modular Plate nursing staff and patients. Wall Box Size Housing Standard Australian/New Zealand Size Wall BoxImproved Infection Control Connectors Wall Box These ergonomic callpoints are flush, wall mounted with a Cable configurable CALL button. Each callpoint has a separate CANCEL button Ipnet: 2xR5-45 socket that illuminates red, giving visual reassurance that a call has been Temperature Over bed indicator: 2-pm screw terminal initiated. Both buttons are manufactured from silicone rubber with an Humidity Range (AWG 24) anti-bacterial additive for improved infection control. CAT5 or CAT6 modular cable (AWG 24) Data / Security cable to over bed indicator light 0-50˚C 0-85% Non CondensingAustco Compliance© 2013 Austco Marketing & Service (Canada) Ltd Designed to comply with:All rights are reserved. • UL 1069 Hospital Signaling and Nurse Call Equipment.Austco Marketing & Service (Canada) Ltd reserves the right to make • C-Tick Electromagnetic compatibility. • IEC 60601-1, UL 60601-1 and CAN/CSA C22.2 No. 601.1-M90: Medicalchanges in specifications and/or discontinue any product at any time electrical equipment - Part 1: General requirements for safety.without notice or obligation and will not be liable for any consequences • CE Mark of European Conformity. Manufactured in general accordance with the requirements ofresulting from the use of this publication. international quality assurance standard ISO9002.Product Code Description Order Options /WR - Water ResistantIP-CPG Callpoint General only /V- Vertical InsertsIP-CPG-CO/P Callpoint with Pendant Socket /H - Horizontal InsertsIP-CPG-EHO/CO Callpoint with Entertainment Handset Outlet * See Inserts Design DocumentCanada Authorised Austco Reseller60 Granton Drive, Unit 6Richmond Hill Ontario L4B 2N6CANADA +1 905 731 1830 +1 905 731 1816www.austco.ca

IP Callpoint General-Vertical InsertsAM-CPG-EM-H AM-CPG-CR-H AM-CPG-CO-H AM-CPG-CC-H AM-CPG-SP-HAM-CPG-SA-H AM-CPG-CP-H AM-CPG-CB-H AM-CPG-ME-H AM-CPG-SC-H CODE CODEAM-CPG-CW-H AM-CPG-PC-H AM-CPG-CN-H AM-CPG-CB-T-H AM-CPG-CP-T-HCODE PORTER CALLAM-CPG-CW-T-H AM-CPG-EM-T-H AM-CPG-SA-T-H AM-CPG-PC-T-H AM-CPG-CC-T-HPRESENCE CALLAM-CPG-SP-T-H AM-CPG-CO-T-HCanada Authorised Austco Reseller60 Granton Drive, Unit 6Richmond Hill Ontario L4B 2N6CANADA +1 905 731 1830 +1 905 731 1816www.austco.ca

IP Callpoint General-Horizontal Inserts AM-CPG-EM AM-CPG-CR AM-CPG-CO AM-CPG-SP AM-CPG-SA AM-CPG-CC AM-CPG-CB AM-CPG-ME AM-CPG-CW AM-CPG-PC AM-CPG-CP AM-CPG-CB-T AM-CPG-CP-T AM-CPG-SC AM-CPG-EM-T AM-CPG-SA-T AM-CPG-CN CALL PRESENCE AM-CPG-CW-T AM-CPG-CC-T AM-CPG-SP-T PORTER AM-CPG-W AM-CPG-B AM-CPG-PC-T AM-CPG-G AM-CPG-Y CALL AM-CPG-O AM-CPG-CO-T Authorised Austco Reseller AM-CPG-R AM-CPG-LGCanada60 Granton Drive, Unit 6Richmond Hill Ontario L4B 2N6CANADA +1 905 731 1830 +1 905 731 1816www.austco.ca

IP Pull Cord Callpoint»» Low activation force Tacera»» Easy to clean vinyl cable prevents spread of bacteria»» Suitable for wet areas Low activation»» To prevent damage strain relief will break above a force 10kg loadIP Pull Cord Callpoint Clear colours and concise labels Water resistant, wall or ceiling mounted callpoints that initiate calls on the Tacera Nurse Call System. The cord has a wipe-clean surface and has its own strain relief to ensure reliable operation without any possibility of damage. Standard features include a reassurance LED, tone sounder for audibly or visually impaired patients and call mute mode for cleaners. Pull Cord Callpoint fits into standard electrical wall boxes, reducing installation times and costs. Manufactured from an impact- resistant polycarbonate / ABS plastic, all Pull Cord Callpoints feature concealed stainless steel fixings to maximize the life of the callpoint and reduce maintenance costs.Lower “Whole-of-Life” Costs Pull Cord Callpoints are IPNet and feature plug-and-play functionality. They are connected in series using only standard CAT5/6 cable that also provides POIPNet (Power Over IPNet). Each callpoint has a unique address and is supplied configured for immediate use. Once connected, the callpoint is quickly and easily assigned to a room using a browser, which simplifies the process and reduces the cost of installation and commissioning. The system continuously checks the functionality of each device and immediately notifies maintenance staff if any problem is detected. Pull Cord Callpoints are hot swappable, making maintenance a breeze – simply replace a callpoint and use a browser to quickly configure the new device.To learn more about Austco products and solutions, visit Austcowww.austco.ca or call to speak to our experts about acommunications solution for your facility.

IP Pull Cord Callpoint These callpoints feature a pull cord with handle that is brightly Feature 116mm (Australian/New Zealand Plate) HeightWater Resistant Width 76mm (Australian/New Zealand Plate) Depth 26mm (Standard) Pull Cord Callpoints are typically installed in bathrooms, toilets 37mm (With pendant socket) and other wet areas, so are supplied with a water resistant Weight 70 grams the callpoint at the back (where moisture ingress normally Screw on occurs) and between the wall plate and wall. Plate Wall Box Size Austco Modular Plate Standard Australian/New Zealand Size Wall Housing Box Connectors Wall Box IPNet: 2xR5-45 socketThese ergonomic callpoints are wall or ceiling mounted with a Cable Over bed indicator: 2-pm screw terminalcontrol. Each wall mounted Pull Cord Callpoint has a separate (AWG 24) Temperature CAT5 or CAT6required for ceiling mounted Pull Cord Callpoints. Humidity Range (AWG 24) Data / Security cable to over bed indicator light 0-50˚C 0-85% Non Condensingcords with a user friendly vinyl pull cord.To avoid nuisance alarms during cleaning, the callpointlogged on the central server, providing an important audit trailAustco Compliance 2017All rights are reserved. Designed to comply with: • UL 1069 Hospital Signaling and Nurse Call Equipment. • C-Tick Electromagnetic compatibility. • IEC 60601-1, UL 60601-1 and CAN/CSA C22.2 No. 601.1-M90: Medical electrical equipment - Part 1: General requirements for safety. • CE Mark of European Conformity. Manufactured in general accordance with the requirements of international quality assurance standard ISO9002.Product Code IP Pull Cord Callpoint, “C” on cancel button, Green fly leadIP-CPG-PC/GIP-CPG-PC/R IP Pull Cord Callpoint, “C” on cancel button, Red fly lead *Note: Cord sold seperatelyCanada Authorized Austco Reseller60 Granton Drive, Unit 6Richmond Hill Ontario L4B 2N6CANADA +1 905 731 1830 +1 905 731 1816www.austco.ca





    IP‐ODL‐4RGB – Over Door Light         4 segments, auto matically maximizes  segment display for  one to four call levels     Features     Ultra high visibility with wide 180˚ viewing angle     Steady or flashing illumination     Fail safe operation     High reliability with long life LEDs           IP Over Door Light    The  IP  Over  Door  Light  is  used  to  indicate  active  alarms/calls    using  four  segments.  The  colors  and  flash  rates  are  uniquely  programmable for each call priority, allowing any existing Nurse  Configure colors to Nurse  Call protocols to be simulated.   Call Standard Code Alerts  The  IP  Over  Door  Lights  have  been  engineered  to  operate  independently  of  the  primary  Nurse  Call  Floor  Controller  ensuring fail‐safe operation.  Lower ‘Whole‐of‐Life’ Costs  With the use of highly reliable LED technology, Over Door Lights  do not require incandescent lamp replacement.   Each  light  has  a  unique  address  and  is  supplied  configured  for  immediate  use.  Once  connected,  the  light  is  quickly  and  easily  assigned to a room using a browser, which simplifies the process  and reduces the cost of installation and commissioning.  Tacera  continuously  checks  the  functionality  of  each  light  and  will  immediately  notify  maintenance  staff  if  any  problem  is  detected.  The  Over  Door  Lights  are  hot‐swappable,  making  maintenance  a  breeze  –  simply  replace  a  light  and  then  use  a  browser to quickly re‐assign functionality to the new light.                www.austco.com 

IP‐ODL‐4RGB – Over Door Light    Information Easily Viewed from a Distance  Technical Specifications  There  are  red,  green  and  blue  LEDs  in  each  segment  that  Feature  Description  provide  improved  reliability  and  increased  brightness  to  Height  115 mm (4.53 in) (Australian  ensure alerts are easy to view from a distance of up to 15 m  Plate)  and from either side.  Width  145 mm (5.71 in) (Australian  Depth  Plate)  Easy to Program On‐site  55 mm (2.17 in) (Standard)  For each call priority, the colors and flashing rate of the Over  Weight  110 g (3.9 oz)  Door Light can be programmed on‐site using a browser. These  Mounting Method  Wall Box or Surface Mount  parameters  can  be  set  as  a  specific  standard  for  a  ward,  Housing  (options)  individual rooms or as a global standard for the site.  Connectors  Shatterproof, heat‐resistant  Optional RGB Coloured Segments  polycarbonate plastic dome  2 x RJ45 IPnet ports  Four segments each have red, green, and blue LEDs allowing  Cable  Cat5/6  for  a  wide  range  of  colors  to  be  displayed  to  comply  with  Color Options  9 different color outputs in four  Nurse  Call  Standard  code  alerts.  Each  segment  can  segments  independently  show  a  color  or  all  segments  can  show  the  Temperature Range  0–50˚C (32–122˚F)  same color. The available colors are shown in this table:  Humidity Range  0–85% Non‐condensing                              Compliance  Designed to comply with:   • AS 3811:1998 Hard‐wired patient alarm systems for  hospitals.  • AS 2999:1989 Alarm systems for the elderly and other  persons at risk.  • HTM 08‐03: Bedhead services.  • UL 1069 Hospital Signaling and Nurse Call Equipment.  • C‐Tick Electromagnetic compatibility.  • IEC 60601‐1, UL 60601‐1 and CAN/CSA C22.2 No. 601.1‐ M90: Medical electrical equipment ‐ Part 1: General  requirements for safety.  • CE Mark of European Conformity.    Manufactured in general accordance with the requirements  of international quality assurance standard ISO9002.  Product Codes  Description  Order Options IP‐ODL‐4RGB    IP Over Door Light, four segments  (Product Family: Tacera)    Terms & Conditions: For specific terms and conditions related to this product and    other company products, please refer to the company website www.austco.com  2015‐10‐30 

  IP‐PSA – IP Power Supp ly Features     Both outputs protected against overload     External LEDs indicate operational status   110–240 V AC Input     Battery backup in case of power failure  Two individually switch  ed power outputs        Key switch protection  IP Power Supply      The IP‐PSA is a wall‐ or rack‐mounted 24 V DC battery‐backed  power  supply  that  is  compatible  with  the  Tacera  Nurse  Call    System. It operates on 110–240 V AC input via a fuse‐protected    mains input socket and cable.    The IP Power Supply is small in size, allowing it to be installed in    the communications room with minimal footprint. LEDs on the    front  panel  of  the  power  supply  display  operational  status.  IP‐PSA‐24V/R (front)    Electronic  fuses  protect  the  power  supply  and  automatically    reset when the overload is removed.    The IP Power Supply provides two 24 V DC power outputs, each  capable of 4 A continuous power to a total output of 8 A.      UPS Battery Backup      The  IP  Power Supply  incorporates  a  24 V battery backup  and  External LEDs indic  ate operational status  charging  circuit  with  two  internal,  sealed  lead  gel  batteries    rated  at  7  Ah  (the  standard  batteries  are  not  included  and    should be ordered locally).      Safe and Reliable    The on/off switches for the DC power outputs are key‐switch    protected  to  prevent  inadvertent  or  malicious  changes  in    settings.    Both  outputs  are  protected  against  overload  by  a  fuse  that    automatically resets after the overload is removed.      IP‐PSA‐24V/R (rear)           www.austco.com 

IP‐PSA – IP Power Supply     Alarms and Indicators  Technical Specifications  External  alarm  outputs  are  provided  for  mains  and/or  DC  Feature  Description  output  failures.  There  is  cabling  to  allow  external  plug‐in  screw connectors to be conveniently accessed and a safety  Height  430 mm (16.93 in)   earth output is provided.  Width  200 mm (7.87 in)  Each  of  the  two  DC  outputs  has  an  ON/OFF  push  button  which  switches  the appropriate  output ON  or OFF.  Above  Depth  130 mm (5.12 in)  each  switch  are  two  green  indicator  LEDs.  The  top  one  indicates  whether  the  OUTPUT  is  OK  or  not.  This  LED  will  Weight (2 m cable)  2.6 kg (5.73 lb)   turn  off  if  the  output  fuse  has  tripped.  The  second  LED  shows whether the output relay is switched ON or OFF.  Mounting Method  Supplied in 19” rack mount  format but is site changeable to  The  BATTERY  OK  LED  is  green  when  the  battery  is  fully  wall mount by reversing rack  charged  and  the  output  voltage  is  above  26  Volts.  When  wings.  running on batteries, this LED will go off when the battery  voltage  becomes  less  than  22  V,  which  indicates  the  Housing  1.2 mm (0.05 in) thick powder‐ batteries  are  getting  dangerously  low.  It  will  reilluminate  coated steel  when the mains power is restored and the battery voltage  exceed 26 V. The LED may stay off when a battery is faulty  Current  2 x 4 amp outputs  and not charging properly.  Voltage  Input: 110–240 V AC 60/60 Hz  The MAINS/FAN FAIL red indicator LED comes on when the  incoming  AC  supply  or  the  fan  fails.  At  the  same  time,  the  Input Fuse  5 A 250 V  corresponding ALARM OUTPUT is activated.   Alarms  Mains fail  The  OUTPUT  LOCKED  green  LED  comes  on  when  the  key  Output fail <19.5 V  switch has been locked.  Batteries (not  Lead acid gel  The OUTPUT FAIL red indicator LED comes on, together with  included)  the corresponding ALARM OUTPUT, when either of the DC  outputs is below 19.5 Volts. This is usually because the fuse  Low Voltage  <18 V  has tripped, or the system is running on batteries and they  Disconnect  are getting low.   Connectors  Plug‐in screw terminals  The  output  connectors  will  be  completely  disconnected  from the power source when running on batteries and the  Cable Length  2 core 2 mm2 TPS (AWG 14)  battery  voltage  becomes  less  than  18  V.  This  is  to  protect  Temperature Range  power cable for each power  the electronics from not operating correctly and to protect  feed  the  batteries  from  deep  discharge  potentially  destroying  0–50˚C (32–122˚F)  the  battery,  reducing  its  ability  to  be  recharged  or  shortening  its  life.  When  AC  mains  supply  is  restored  the  Humidity Range  0–85% Non‐condensing  outputs will automatically be reconnected.           Compliance  Designed to comply with:   • AS 3811:1998 Hard‐wired patient alarm systems for  hospitals.  • AS 2999:1989 Alarm systems for the elderly and other  persons at risk.  • HTM 08‐03: Bedhead services.  • UL 1069 Hospital Signaling and Nurse Call Equipment.  • C‐Tick Electromagnetic compatibility.  • IEC 60601‐1, UL 60601‐1 and CAN/CSA C22.2 No. 601.1‐ M90: Medical electrical equipment ‐ Part 1: General  requirements for safety.  • CE Mark of European Conformity.    Manufactured in general accordance with the requirements  of international quality assurance standard ISO9002. Product Codes  Description  Order Options IP‐PSA‐24V/R    IP Power Supply, 24 V (240 V AC Input)  Wall mount delete /R  IP‐PSA‐10/110/950  IP Power Supply, 24 V (110 V AC Input)  Note: Battery is a standard 7 Ah lead gel, we recommend  (Product Family: Tacera)  local purchase  Terms & Conditions: For specific terms and conditions related to this product and    other company products, please refer to the company website www.austco.com  2015‐10‐26  

Touch Screen Nurse Station» Sleek & specialized design focused on healthcare» Natural viewing experience with 16:9, 11.6\" display» Easy to clean full-flat, front touch panel IP 65 compliant» Powered by an Intel®Atom™ D510 ProcessorIP-TSNS/M NurseStation DimensionsIP-TSNS/M Healthcare Terminal has an 11.6” single-surface 302.50 6.75touchscreen, is powered by an Intel® AtomTM D510 Processor,supports Windows, Android and Linux operating systems, and is 220.25 2.75built with a compact, VESA mountable form factor. 43.00The IP-TSNS is a robust medical device which has a slim designmaking it an exceptional choice for healthcare applications.Features• Revolutionary & specialized design focused on healthcare applications and terminal leasing market• 43 mm thick slim design achieves balance between fanless & Atom dual-core performance• Easy to clean full-flat, front touch panel IP 65 compliant• VESA 75 mm standard mounting holes for varied mounting demands• Rich options - Handset/ RFID/ Smart card reader/ Barcode Scanner/ MSR• ITE & medical dual certificates provide complete application coveragewww.austco.us or call to speak to our experts about a

SpecificationsHardware CPU Intel Atom (N450/D510) 1.6 GHz Processor Front Side Bus Supports FSB 667 MHzDisplay System Chipset Intel N450/D510 + ICH8MTouchscreen Memory up to 2 GB Storage CF or SATA HDD interfaceI/O Ports Camera 2 megapixel CCD Module (Optional)Audio Bus Expansion Mini PCIe x 2Network Size 11.6\" W TFTEmergency Alarm Max Resolution 1366 x 768Bus Expansion Luminance 200 cd/m2Software Contrast Ratio 400:1Mechanical Type Analog Resistive Light Transmission 80%Options Durability 30 million USB Port 3 (side x 2, rear x 1)Power Supply Smart Card Rearder 1 (Removeable with Insert sealed by plastic changecord) Line out 1Environment Microphone in 1 COM Port (Isolated) 1 Speaker 2 watt x 2 Microphone 1 LAN 10/100/1000 RJ-45 x 1 WLAN 802.11 b/g/n Hotkey 5 programmable touch buttons with 2 types of artwork LED Light Indicator 1 mini-PCI Slot 2 (1 for WLAN, 1 for tuner) Operating System Support WES, WES7, Win7 / Linux: Fedora 13, Ubuntu, Android Mounting VESA 75 x 75 mm Dimensions ( W x H x D) 302.5 x 220.25 x 43 mm Weight 2.3 kg TV Tuner Yes, Optional Handset Yes, Optional Barcode Scanner Yes, Optional. 2D type Table Stand Yes, Optional RFID Yes, Optional AC/DC Adapter 100 ~ 240 VAC, 1.1 ~ 0.45 A @ 47~ 63 Hz Input Voltage IT: 19 VDC, 3.95 A MAX; Medical: 16 ~ 21 VDC (SET UP 19V), 2.63 A MAX Output Voltage 0 ~ 40° C Operating Temperature Front Panel: IP65; IPX1 All around IP Rating 1G Vibration 50 G Shock CE, FCC, CCC, CB, ITE UL, EN 60950 & EN 60601-1 approved Certifications 2015 (USA) Inc.All rights are reserved.Austco Marketing & Service (USA) Ltd. reserves the right to makechanges in specifications and/or discontinue any product at any timewithout notice or obligation and will not be liable for any consequencesresulting from the use of this publication.Product CodeIP-TSNS/MUnited States Latin America Authorized Austco Reseller9155 Sterling Street, 2010 Rossmore CtSuite 100 New Smyrna Beach FL 32168Irving TX 75063 UNITED STATESUNITED STATES +1 407 574 7234 +1 972 929 0974 +1 407 574 7234 +1 972 929 0976 www.austco.comwww.austco.us

Helping you keep a PULSE on your business PULSE Mobile Your alarms, on your phone, when and where you need them.What is Pulse Mobile?Pulse Mobile is a component of Austco’s Pulse platform and allows healthcare personnel to receive critical nurse call alarmnotifications directly on their smartphones. Pulse Mobile ensures that the right alarms are sent to the right caregiver,at the right time.Alarm PrioritizationPulse Mobile automatically prioritizes active nurse call alarms,placing the highest priority alarm at the top of the alarm list.This ensures that caregivers respond quickly to the highestpriority alarms.Call Back FeaturePulse Mobile provides touch-to-call functionality allowing caregiversto initiate a voice call from their smartphone directly to the locationwhere the alarm was activated. This enhanced communicationhelps caregivers better prioritize their workflow and assist withmanaging responses to various patient/resident alarms.

PULSE MobileDownload and Go Alarm Active Alarm Location DurationPulse Mobile is conveniently available for download in the Color CodedApple and Google play stores. Simply connect to your Alarm Typesfacility’s Wi-Fi network, allowing the mobile app tocommunicate with the Austco Integration Server software. Comprehensive & robust reporting: Customizable reporting of all facility alarms and responses toIMPROVE PATIENT critical events.OUTCOMES Intuitive User Interface: Extremely easy to learn and navigate using technology that staff are already If you are connected to Wi-Fi using Austco’s Integration familiar with. Server, Pulse Mobile will automatically be configured and updated. All that users need to do is log in with a valid Safe and Secure: Smartphones are used on the username and password. facility’s reliable Wi-Fi network providing consistent and secure communication. At no time is patient When a user logs in, they will begin to receive all active information stored on a recipient’s smartphone, alarms that are assigned to them. which ensures regulatory compliance. Pulse Mobile sends active alarms using push notifications to Easy installation and application updates: Pulse alert caregivers that an alarm has occurred. Mobile is conveniently available for download from the Apple and Google Play stores.Benefits Enhances staff mobility: Gives caregivers access to nurse call event data which eliminates the need to walk back and forth to the nurses' station. Increases staff efficiency: Routing nurse call alarms directly through smartphones allows staff to determine which alarms require immediate attention at a quick glance. Enhances established workflows: Ensures the right alarms are sent to the right caregiver at the right time. Increases patient satisfaction: Faster response times and reduced audible alarms create a quieter healing environments and provide a better overall patient experience. USA LATIN AMERICA CANADA9155 Sterling Street, Suite 100 2010 Rossmore Court 60 Granton Drive, Unit 6 Richmond Hill, Ontario, L4B 2N6 Irving, TX 75063 New Smyrna BeachUNITED STATES OF AMERICA FLORIDA CANADA 905-731-1830 +972-929-0974 407-574-7234 [email protected] [email protected] [email protected] L-213 www.austco.com

Achieve your facility goals with Ease and Simplicity Reports and DashboardsNurse Call Performance PortalTacera Pulse is part of a suite of software applications for personal computers or mobile devices that delivers business intelligenceinformation to an interactive dashboard, allowing you to make data driven decisions using current data from your organization.Reports With the urgent need to identify methods for validating nurse workload, productivity, and system effectiveness, facility managers and administrators now have a solution that tracks and manages critical caregiver-to-patient interactions and events. Tacera Pulse monitors nurse call alarms, collects alarm and response data, then creates metrics for measuring and analyzing performance outcomes. Facility and workflow data is now routinely captured and easily accessible. Tacera Pulse Reports gives decision makers the information they need to make informed decisions that optimize operations. Streamlining complex processes; such as scheduling staff, managing housekeeping, and overseeing maintenance creates more time to focus on high-quality patient care.Dashboards Dashboards provide a visual presentation of your facility’s KPIs (Key Performance Indicators), which allows you to effortlessly monitor many areas of operational performance simultaneously. Tacera Pulse dashboards are highly configurable and allow users to set preferences in terms of how their dashboards display and are organized.

SIMPLE TO USE AND LEARNLooks great, functions even better. Technology Tacera Pulse is a web-based KPI portal that uses modern web technology to create an intuitive, interactive desktop experience. Its responsive design allows the application to run on a desktop browser, tablet, or smartphone. A cloud based or hybrid installation reduces or eliminates the need to purchase and maintain server hardware and software.User-Friendly Graphical InterfaceTacera Pulse comes with an easy-to-use interface developed withinput from healthcare professionals. Accomplish your facility goalswith minimal training and administrative costs, thanks to TaceraPulse’s intuitive navigation and interactions.Use a mouse or a touch-enabled device to efficiently monitor andreport on the state of your facility.

DELIVER HIGH QUALITY CAREImprove Operational EfficienciesComprehensive and Robust ReportingThe healthcare industry is both competitive and highly regulated. Healthcare facilitiesare required to report on quality and capture key metrics necessary to validate theirability to provide a safe and efficient patient environment.Using Tacera Pulse’s enterprise level Reporting module, healthcarefacilities can aggregate data on specific KPI’s (key performanceindicators), giving facilities the ability to measure data with thegranularity needed to achieve facility goals which is essential toauditing performance and improving patient workflow. Personalized Dashboards Tacera Pulse’s personalized Dashboards provide hospital staff the ability to monitor call activity, staff response and other KPIs through an interactive dashboard. In addition, facility management and administrators can generate several types of reports, capturing metrics and information critical to validating nurse workload, increasing productivity and system effectiveness, and ultimately increasing the quality of patient care.

Manage performance data and optimize your facility strategy inreal-timeFeatures and BenefitsFeatures BenefitsCentralized database for dashboard and Utilizes a Cloud infrastructure for deployment, which allows for greaterreporting accessibility, flexibility, reliability and scalabilityConfigurable dashboards Provides flexible dashboard configurations. Each dashboard can display multiple widgets which are configured to display the exact KPI informa-Intuitive user interface tion that each user wants to see based on location(s), alarm type(s), etc. Reduces training and administration costs by providing an intuitive andComprehensive & robust reporting easy to learn interface designed with the contribution from Nurses and CNO’s Customizable reporting of all alarms and responses to critical eventsImproves patient and staff satisfaction Improves HCAHPS scores through increased patient satisfaction & safetyIntegrationBrowser based Collects and measures data that can be analyzed to better manage staffActive Directory integration and patient loads Provides greater accessibility. No installation is required, so users can access the system using their current browser (Internet Explorer, Firefox, Safari, Chrome) Simplifies management and control of usernames and passwords USA www.austco.com CANADA9155 Sterling Street, Suite 100 60 Granton Drive, Unit 6 Richmond Hill, Ontario, L4B 2N6 Irving, TX 75063UNITED STATES OF AMERICA CANADA 905-731-1830 972-929-0974 [email protected] [email protected]/AustcoNurseCall Austco_com facebook.com/Austco company / austco ©2015 Austco Communication Systems. L-003, Rev. A