Catalogue 8

WIRING ACCESSORIES IP68 Sealing Gels & DIN Rail WIRING ACCESSORIES PRONTOGEL IP68 Insulating Paste Gel • IP68* Mono-component paste gel • Ready to use, no mixing • Suitable for vertically mounted fixings • Re-accessible, Re-moldable & Re-usable • Transparent • No shelf life & non toxic • High dielectric strength • Suitable for installations up to 1Kv Part Number Description GSM250 250ml IP68 Mono-component Paste Gel in Squeezable Tube GSM280 280ml IP68 Mono-component Paste Gel in Sealant Gun Cartridge GSM030 300ml IP68 Mono-component Paste Gel in re-sealable tub GSM1 1L IP69 Mono-component Paste Gel in resealable tub *IP68 when used in IP rated enclosure GSM250 GSM280 GSM030 DIN Rail TS Series DIN Rail & Accessories • Industry standard DIN rail • 32 G rail, 35 & 35/15mm top hat • Slotted rail, unslotted also available • Angled mounting bracket accessory • Supplied in 1 or 2 Metre lengths • Custom lengths also available TS-AB Part Number Description TS-32 32 x 15mm G DIN Rail Slotted 2 Metre Length TS-35(1000) 35 x 7.5mm Top Hat DIN Rail Slotted 1 Metre Length TS-35 35 x 7.5mm Top Hat DIN Rail Slotted 2 Metre Length TS-35/15 35 x 15mm Top Hat DIN Rail Slotted 2 Metre Length TS-AB DIN Rail Angled Mounting Bracket Other Lengths and cut sizes also available WIRING ACCESSORIES 49 Web: www.switchtec.com email: [email protected]

WIRING ACCESSORIES CWAIBRILENGTEARCCMIESNSATOIRIOENS IP68 Sealing Gels ISOLKIT IP68 Insulating Bi-component Kits • IP68* Bi-component Gel, Rubber or Paste Kits • Comprising of : Plastic IP rated enclosure 3 x M20 cable glands Terminal connector Bi-component Gel, Rubber or Paste • Supplied in 1 complete kit/box GI-BOX80 *IP68 when used in IP rated enclosure Part Number Description GI-BOX80 80 x 80 x 40mm enclosure, 4mm² 4 Way Terminal block, 3 Cable glands & 1 bag of Bi-component Gel GI-BOX100 100 x 100 x 60mm enclosure, 4mm² 4 Way Terminal block, 3 Cable glands & 1 bag of Bi-component Gel GL-BOX80 80 x 80 x 40mm enclosure, 4mm² 4 Way Terminal block, 3 Cable glands & 300ml Bi-component Rubber GL-BOX100 100 x 100 x 60mm enclosure, 4mm² 4 Way Terminal block, 3 Cable glands & 300ml Bi-component Rubber GM-BOX100 100 x 100 x 60mm enclosure, 4 x 3 Way Terminal connector, 3 Cable glands & 1 pot of Gel Paste GI-BOX100 GL-BOX100 GM-BOX100 Mix both parts of the Bi-component Pour into the enclosure & leave to set Gel & stir well for 30 seconds for at least 15 minutes WIRING ACCESSORIES 50 Telephone: 01785 818600 Fax: 01785 811900

WIRING ACCESSORIES Cable Trunking WIRING ACCESSORIES KABLO Cable Trunking • RAL7030 Grey slotted cable trunking • 6mm slot with 6.5mm segment Part Number • Available from 25 x 25mm to 100 x 100mm V6K2525 • Supplied in 2 metre lengths* V6K2540 • Easy fit, non slip cover V6K2580 • Anti-sag reinforced base structure V6K4025 • UL, CSA, VDE, IMQ, CE & UKCA approved V6K4030 • Conforms to IEC50085-2-3. UL94:V0 & IK 08(6J) V6K4040 • Also available in White RAL9003 & Blue RAL5012 V6K4060 V6K4080 Dimensions (W x H x L) Pack Size* V6K60100 V6K60120 25 x 25mm x 2 Metres 25 Lengths (50 Metres) V6K6025 40 x 25mm x 2 Metres 24 Lengths (48 Metres) V6K6030 80 x 25mm x 2 Metres 12 Lengths (24 Metres) V6K6040 25 x 40mm x 2 Metres 24 Lengths (48 Metres) V6K6060 30 x 40mm x 2 Metres 20 Lengths (40 Metres) V6K6080 40 x 40mm x 2 Metres 25 Lengths (50 Metres) V6K80100 60 x 40mm x 2 Metres 20 Lengths (40 Metres) V6K80120 80 x 40mm x 2 Metres 15 Lengths (30 Metres) V6K8025 100 x 60mm x 2 Metres 8 Lengths (16 Metres) V6K8030 120 x 60mm x 2 Metres 6 Lengths (12 Metres) V6K8040 25 x 60mm x 2 Metres 30 Lengths (60 Metres) V6K8060 30 x 60mm x 2 Metres 24 Lengths (48 Metres) V6K8080 40 x 60mm x 2 Metres 20 Lengths (40 Metres) V6K10030 60 x 60mm x 2 Metres 12 Lengths (24 Metres) V6K10040 80 x 60mm x 2 Metres 10 Lengths (20 Metres) V6K10060 100 x 80mm x 2 Metres 6 Lengths (12 Metres) V6K10080 120 x 80mm x 2 Metres 8 Lengths (16 Metres) V6K100100 25 x 80mm x 2 Metres 10 Lengths (20 Metres) 30 x 80mm x 2 Metres 12 Lengths (24 Metres) 40 x 80mm x 2 Metres 10 Lengths (20 Metres) 60 x 80mm x 2 Metres 10 Lengths (20 Metres) 80 x 80mm x 2 Metres 6 Lengths (12 Metres) 30 x 100mm x 2 Metres 24 Lengths (48 Metres) 40 x 100mm x 2 Metres 20 Lengths (40 Metres) 60 x 100mm x 2 Metres 8 Lengths (16 Metres) 80 x 100mm x 2 Metres 8 Lengths (16 Metres) 100 x 100mm x 2 Metres 6 Lengths (12 Metres) Easy fit cover Cable tie loops Reinforced base Textured base Precut segments Non slip cover Replacement Covers & Halogen Free versions also available *Sold in pack quantities only WIRING ACCESSORIES Web: www.switchtec.com email: [email protected] 51

CONTROL COMPONENTS CONTROL COMPONENTS Push Buttons PB Series 22.5mm Push Buttons • IP65 22.5mm panel mount • 10 Amp rated contact • Snap Fit contacts, easy to install • Normally Open & Normally Closed contacts • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 contacts can be added to 1 Push Button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Description PB22BFR-1B Red Push Button with 1 Normally Closed Contact PB22BFG-1A Green Push Button with 1 Normally Open Contact PB22BFY-1A Yellow Push Button with 1 Normally Open Contact PB22BFBL-1A Blue Push Button with 1 Normally Open Contact PB22BFW-1A White Push Button with 1 Normally Open Contact PB22BFB-1A Black Push Button with 1 Normally Open Contact PB22BFWA-1A White Push Button with Black Arrow & 1 Normally Open Contact PB22BFBA-1A Black Push Button with White Arrow & 1 Normally Open Contact PB Series 22.5mm LED Illuminated Push Buttons • IP40 22.5mm panel mount • LED Illuminated 24VAC/DC & 230VAC versions • 10 Amp rated contact • Snap Fit contacts, easy to install • Normally Open & Normally Closed contacts • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 Contacts can be added to 1 Push Button • UL, CSA, TUV, CCC, CE & UKCA Approved 24VAC/DC Part Number 230VAC Part Number Description PB22IF7RL-1B PB22IF2RL-1B Red LED Illuminated Push Button with 1 Normally Closed Contact PB22IF7GL-1A PB22IF2GL-1A Green LED Illuminated Push Button with 1 Normally Open Contact PB22IF7YL-1A PB22IF2YL-1A Yellow LED Illuminated Push Button with 1 Normally Open Contact PB22IF7BLL-1A PB22IF2BLL-1A Blue LED Illuminated Push Button with 1 Normally Open Contact PB22IF7WL-1A PB22IF2WL-1A White LED Illuminated Push Button with 1 Normally Open Contact Other voltages available. Accessories including additional contact blocks, IP67 Sealing Caps, Shrouds & Legends are detailed on page 57 CONTROL COMPONENTS 52 Telephone: 01785 818600 Fax: 01785 811900

CONTROL COMPONENTS Push Buttons CONTROL COMPONENTS PB Series 22.5mm Latching Push Buttons • IP65 Latching 22.5mm panel mount • 10 Amp rated contact • Snap Fit contacts, easy to install • Normally Open & Normally Closed contacts • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 contacts can be added to 1 Push Button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Description PB22BAR-1B Red Latching Push Button with 1 Normally Closed Contact PB22BAG-1A Green Latching Push Button with 1 Normally Open Contact PB22BAY-1A Yellow Latching Push Button with 1 Normally Open Contact PB22BABL-1A Blue Latching Push Button with 1 Normally Open Contact PB22BAW-1A White Latching Push Button with 1 Normally Open Contact PB22BAB-1A Black Latching Push Button with 1 Normally Open Contact Illuminated versions also available PB Series 22.5mm Mushroom Headed Push Buttons • Mushroom Headed momentary Push Button • IP65 22.5mm panel mount • 10 Amp rated contact • Snap Fit contacts, easy to install • Normally Open & Normally Closed contacts • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 Contacts can be added to 1 Push Button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Description PB22BMR-1B Red Mushroom Headed Push Button with 1 Normally Closed Contact PB22BMG-1A PB22BMY-1A Green Mushroom Headed Push Button with 1 Normally Open Contact PB22BMBL-1A PB22BMW-1A Yellow Mushroom Headed Push Button with 1 Normally Open Contact PB22BMB-1A Blue Mushroom Headed Push Button with 1 Normally Open Contact White Mushroom Headed Push Button with 1 Normally Open Contact Black Mushroom Headed Push Button with 1 Normally Open Contact Dimensions Illuminated versions also available PB22 Series PB22 Series Illuminated Standard Latching Mushroom Emergency Stop CONTROL COMPONENTS 53 Web: www.switchtec.com email: [email protected]

CONTROL COMPONENTS CONTROL COMPONENTS Push Buttons PB Series 22.5mm Emergency Stop Twist to Release Mushroom Headed Push Button • IP65 22.5mm panel mount • 10 Amp rated contact • Snap fit contacts, easy to install • Normally Closed contact • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 contacts can be added to 1 push button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Description PB22BKR-1B Red Emergency Stop Twist to Release Push Button with 1 Normally Closed Contact PB Series 22.5mm Dual Red & Green Push Button • IP40 22.5mm panel mount • Dual Head, Red & Green • 10 Amp rated contact • Snap fit contacts, easy to install • 1 Normally Open & 1 Normally Closed contacts • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 contacts can be added to 1 push button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Description PB22BT-1AB Dual Red & Green Push Button with 1 Normally Open & 1 Normally Closed Contact Illuminated version also available CONTROL COMPONENTS 54 Telephone: 01785 818600 Fax: 01785 811900

Push Buttons CONTROL COMPONENTS CONTROL COMPONENTS PB Series 22.5mm Selector Switches • IP65 22.5mm panel mount • 10 Amp rated contact • Snap fit contacts, easy to install • Normally Open contacts • Supplied complete with contact & coupling • Colour coded contact blocks • Up to 8 contacts can be added to 1 push button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Positions Description PB22SS2B-1A 90O 2 Position Latching Selector Switch with 1 Normally Open Contact PB22SS3B-1A 90O 2 Position Spring Return to Left Selector Switch with 1 Normally Open Contact PB22SS4B-1AA 45O 3 Position Latching Selector Switch with 2 Normally Open Contacts PB22SS5B-1AA 45O 3 Position Selector Switch Right Spring Return to Off, Left Latching with 2NO Contacts PB22SS6B-1AA 45O 3 Position Selector Switch Left Spring Return to Off, Right Latching with 2NO Contacts PB22SS7B-1AA 45O 3 Position Spring Return to Off Selector Switch with 2 Normally Open Contacts Illuminated & Long Leaver versions also available PB Series 22.5mm Key Switches • IP65 22.5mm panel mount • 10 Amp rated contact • Snap Fit contacts, easy to install • Normally Open contacts • Supplied complete with contact & coupling • Colour coded contact clocks • Up to 8 contacts can be added to 1 push button • UL, CSA, TUV, CCC, CE & UKCA Approved Part Number Positions Description PB22KS21-1A 90O 2 Position Latching Key Switch with 1 Normally Open Contact Key Removal 0 1 PB22KS22-1A 90O 2 Position Latching Key Switch with 1 Normally Open Contact Key Removal 0 PB22KS32-1A 90O 2 Position Spring Return to Left Key Switch with 1 NO Contact Key Removal 0 PB22KS44-1AA 45O 3 Position Latching Key Switch with 2 Normally Open Contacts Key Removal 1 0 2 PB22KS45-1AA 45O 3 Position Latching Key Switch with 2 Normally Open Contacts Key Removal 0 PB22KS55-1AA 45O 3 Position Key Switch Right Spring Return to Off, Left Latching 2NO Key Removal 0 PB22KS65-1AA 45O 3 Position Key Switch Right Latching, Left Spring Return to Off 2NO Key Removal 0 PB22KS75-1AA 45O 3 Position Spring Return to Off Key Switch with 2 NO Contacts Key Removal 0 Dimensions PB22 Series PB22 Series Illuminated Selector Long Selector Key Switch Dual Push Button CONTROL COMPONENTS Web: www.switchtec.com email: [email protected] 55

CONTROL COMPONENTS CONTROL COMPONENTS Push Buttons PB Series IP65 Enclosed Push Button Stations • IP65 Ingress Protection • Base mounted contacts • Supplied complete with contact blocks fitted • 10 Amp contacts • Colour coded contact blocks • Yellow or Grey plastic enclosure • 2 x 22mm Knockouts • Customised versions also available Emergency Stop Single Push Button Stations Part Number Description PB1-BKR3-Y-1B Red Emergency Stop Twist to release with 1NC Contact & Yellow Enclosure EM.STOP PB1-BPR3-Y-1B Red Emergency Stop Push, Pull to release with 1NC Contact & Yellow Enclosure EM.STOP PB1-BMR3-Y-1B Red Mushroom Headed Push Button, momentary, with 1NC Contact & Yellow Enclosure EM.STOP PB1-KMR322-Y-1B Red Emergency Stop Key Release with 1NC Contact & Yellow Enclosure EM.STOP Single Push Button Stations Part Number Description PB1-BFG2-G-1A Green Push Button with 1NO Contact & Grey Enclosure ON PB1-BFR1-G-1B Red Push Button with 1NO Contact & Grey Enclosure OFF PB1-SS2B-G-1A 90o 2 Position Latching Selector Switch with 1NO Contact & Grey Enclosure ON OFF PB1-SS4B-G-1AA 45o 3 Position Latching Selector Switch with 2x1NO Contacts & Grey Enclosure ON OFF ON PB1-KS21-G-1A 90o 2 Position Latching Key Switch with 1NO Contact & Grey Enclosure ON OFF PB1-KS44-G-1AA 45o 3 Position Latching Key Switch with 2x1NO Contacts & Grey Enclosure ON OFF ON Double Push Button Stations Part Number Description PB2-BFRG-G Green & Red Push Button with 1NO & 1NC Contact Grey Enclosure START STOP PB2-BSW1-G Green & Emergency Stop Twist Release with 1NO & 1NC Contact Grey Enclosure ON EM.STOP PB2-BFBWA-G White & Black Arrowed Push Buttons with 2x1NO Contacts Grey Enclosure UP DOWN Triple Push Button Stations Part Number Description PB3-BSW1-G Green, Red & Emergency Stop Twist Release Push Buttons 1NO 2x1NC Grey Enclosure PB3-BFBWAK-G White & Black Arrowed Push Buttons with Emergency Stop 1NC 2x1NO Contacts Grey Enclosure PB3-BFBR-G White & Black Arrowed Push Buttons with Red Push Button 1NC 2x1NO Contacts Grey Enclosure PB1-SS2B-G-1A PB2-BFRG-G PB3-BFBR-G CONTROL COMPONENTS 56 Telephone: 01785 818600 Fax: 01785 811900

Push Buttons CONTROL COMPONENTS CONTROL COMPONENTS PB Series Push Button Accessories • Contact blocks • Fixing tools • Sealing Caps • Couplings • Empty enclosures • Legend plates Contact Blocks Description Part Number 1 Normally Open Contact Block 1 Normally Closed Contact Block PB22-A 1 Normally Open & 1 Normally Closed Contact Block PB22-B 1 Normally Open Contact Block Base Mount PB22-C 1 Normally Closed Contact Block Base Mount PB22-B1A 1 Normally Open & 1 Normally Closed Contact Block Base Mount PB22-B1B PB22-B1C Other Accessories PB22-A PB22-GR Part Number Description PB22-B1G PB22-EA & PB22-FT PB22-SC IP67 Sealing Cap for 22.5mm Push buttons PB22-BTSC IP65 Sealing Cap for Dual Head PB22BT-1AB Push button PB22-EA Yellow Push button protection Shroud PB22-FT PB Series Fixing tool PB22-COUPLING PB22 Series Coupling PB22-GR Push button Lock Out Shroud Empty Enclosures Description Yellow Part Number Grey Part Number 1 Hole IP65 Enclosure with 2x 22mm Knockouts PB22-B1Y PB22-B1G 2 Hole IP65 Enclosure with 2x 22mm Knockouts PB22-B2Y PB22-B2G 3 Hole IP65 Enclosure with 2x 22mm Knockouts PB22-B3Y PB22-B3G 4 Hole IP65 Enclosure with 2x 22mm Knockouts PB22-B4Y PB22-B4G 5 Hole IP65 Enclosure with 2x 22mm Knockouts PB22-B5Y PB22-B5G Legend Plates Legend Part Number Legend Part Number ON PB22P-15 ON OFF ON OFF PB22P-19 AUTO OFF MAN PB22P-01 START PB22P-21 MAN OFF AUTO PB22P-02 STOP PB22P-17 FWD OFF REV PB22P-03 OFF ON PB22PE-02* EMERGENCY STOP PB22P-04 01 PB22PEL-02** EMERGENCY STOP PB22P-13 PB22P-71 Other legends available * = 60mm Yellow Disc ** = 90mm Yellow Disc LEGEND PLATES CONTROL COMPONENTS 57 Web: www.switchtec.com email: [email protected]

CONTROL COMPONENTS CONTROL COMPONENTS Push Buttons i Series 22.5mm Push Buttons • 22.5mm panel mount • 10 Amp rated contact • Metal bezel & metal coupling • Normally Open & Normally Closed contacts • Colour coded contacts • Supplied complete with contact & coupling • Quick fit, easy to install • Manufactured to IEC 60947-5-1 • CE & UKCA Approved Part Number Description IPB-R-01 Red Push Button with 1 Normally Closed Contact IPB-G-10 Green Push Button with 1 Normally Open Contact IPB-Y-10 Yellow Push Button with 1 Normally Open Contact IPB-BL-10 Blue Push Button with 1 Normally Open Contact IPB-W-10 White Push Button with 1 Normally Open Contact IPB-B-10 Black Push Button with 1 Normally Open Contact IPB-WDPB-11 Dual Red & Green Push Button with 1NO & 1NC Contact i Series 22.5mm LED Illuminated Push Buttons • 22.5mm panel mount • LED Illuminated 24VAC/DC, 110 & 230VAC versions • 10 Amp rated contact • Metal bezel & metal coupling • Normally Open & Normally Closed contacts • Colour coded contacts • Supplied complete with contact & coupling • Quick fit, easy to install • Manufactured to IEC 60947-5-1 • CE & UKCA Approved Part Number Description IPBI-R-01-* Red LED Illuminated Push Button with 1 Normally Closed Contact IPBI-G-10-* Green LED Illuminated Push Button with 1 Normally Open Contact IPBI-Y-10-* Yellow LED Illuminated Push Button with 1 Normally Open Contact IPBI-BL-10-* Blue LED Illuminated Push Button with 1 Normally Open Contact IPBI-W-10-* White LED Illuminated Push Button with 1 Normally Open Contact * Insert Voltage 230 = 230VAC, 110/230 = 110/230VAC or 24 = 24VAC/DC IPB-R-01 IPB-B-10 IPB-Y-10 IPBI-G-10-24 IPBI-BL-10-230 IPBI-R-01-110/230 58 CONTROL COMPONENTS Telephone: 01785 818600 Fax: 01785 811900

CONTROL COMPONENTS Push Buttons CONTROL COMPONENTS i Series 22.5mm Selector Switches • 22.5mm panel mount • 10 Amp rated contact • Metal bezel & metal coupling • Normally Open contacts • Colour coded contacts • Supplied complete with contact & coupling • Quick fit, easy to install • Manufactured to IEC 60947-5-1 • CE & UKCA Approved Part Number Positions Description ISS-2P-10 90O 2 Position Latching Selector Switch with 1 Normally Open Contact ISS-SR-2P-10 90O 2 Position Spring Return to Left Selector Switch with 1 Normally Open Contact ISS-3P-20 45O 3 Position Latching Selector Switch with 2 Normally Open Contacts ISS-SR-3P-20 45O 3 Position Spring Return to Off Selector Switch with 2 Normally Open Contacts ISS-SRL-3P-20 45O 3 Position Selector Switch Left Spring Return to Off, Right Latch with 2 NO Contacts ISS-SRR-3P-20 45O 3 Position Selector Switch Right Spring Return to Off, Right Latch with 2 NO Contacts i Series 22.5mm Key Switches • 22.5mm panel mount • 10 Amp rated contact • Metal bezel & metal coupling • Normally Open & Normally Closed contacts • Colour coded contacts • Supplied complete with contact & coupling • Quick fit, easy to install • Manufactured to IEC 60947-5-1 • CE & UKCA Approved Part Number Positions Description IKS-2P-10 90O 2 Position Latching Key Switch with 1 Normally Open Contact Key Removal 0 IKS-2P-10-KOA 90O 2 Position Latching Key Switch with 1 Normally Open Contact Key Removal 0 1 IKS-SR-2P-10 90O 2 Position Spring Return Key Switch with 1 Normally Open Contact Key Removal 0 IKS-3P-20 45O 3 Position Latching Key Switch with 2 Normally Open Contacts Key Removal 0 IKS-3P-20-KOA 45O 3 Position Latching Key Switch with 2 Normally Open Contacts Key Removal 1 0 2 IKS-SR-3P-20 45O 3 Position Spring Return to Off Key Switch with 2 NO Contacts Key Removal 0 IPB-WDPB-11 ISS-2P-10 ISS-3P-20 IKS-2P-10 IKS-3P-20-KOA IKS-SR-3P-20 CONTROL COMPONENTS 59 Web: www.switchtec.com email: [email protected]

CONTROL COMPONENTS CONTROL COMPONENTS Push Buttons i Series 22.5mm Emergency Stop Push Buttons • 22.5mm panel mount • 10 Amp rated contact • Metal bezel & metal coupling • Normally Closed contacts • Colour coded contacts • Supplied complete with contact & coupling • Quick fit, easy to install • Manufactured to IEC 60947-5-1 • CE & UKCA Approved Part Number Description IESTR-R-01 Red Emergency Stop Twist to Release Push Button with 1 NC Contact 40mm Head IESTR60-R-01 Red Emergency Stop Twist to Release Push Button with 1 NC Contact 60mm Head IESKR-R-01 Red Emergency Stop Key Release Push Button with 1 Normally Closed Contact IESPP-R-01 Red Emergency Push, Pull to Release Push Button with 1 Normally Closed Contact IESSR-R-01 Red Mushroom Headed, Momentary, Push Button with 1 Normally Closed Contact Other colours available IESTR-R-01 IESTR60-R-01 IESKR-R-01 IESPP-R-01 IESSR-R-01 i Series Push Button Accessories • Contact Blocks • Couplings • Spare Keys • Ba9s LED Bulbs • Legend Plates • Empty Enclosures Legend Plates White on Black Part Number Description Part Number Legend IP-NO IP-NC 1 Normally Open Contact Block ILP-BLANK IP-BMNO IP-BMNC 1 Normally Closed Contact Block ILP-UP UP IP-COUPLING IKS-SPAREKEY 1 Normally Open Contact Block Base Mount ILP-DOWN DOWN IP-BA9SLED-24V 1 Normally Closed Contact Block Base Mount ILP-RESET RESET IP-BA9SLED-110V IP-BA9SLED-230V i Series Coupling ILP-FORWARD FORWARD IPBE-1 IPBE-2 Spare Key for i Series Key Switches ILP-REVERSE REVERSE IPBE-3 Ba9s 4.1mA LED Bulb 24V White ILP-OFF/ON OFF ON 60 Ba9s 3mA LED Bulb 110V White ILP-HOA HAND OFF AUTO Ba9s 12mA LED Bulb 230V White Legend Plate Black on Yellow 1 hole IP65 Enclosure with 2 x 22mm Knockouts 2 hole IP65 Enclosure with 2 x 22mm Knockouts Part Number Legend 3 hole IP65 Enclosure with 2 x 22mm Knockouts ILP-ESTOP60 EMERGENCY STOP CONTROL COMPONENTS Other legends available Telephone: 01785 818600 Fax: 01785 811900

CONTROL COMPONENTS Push Buttons CONTROL COMPONENTS i Series IP65 Enclosed Push Button Stations IPBS-ESTR • IP65 Ingress Protection • Base mounted contacts • Supplied complete with contact blocks fitted • 10 Amp Contacts • Colour coded contact blocks • Yellow or Grey plastic enclosure • 2 x 22mm Knockouts • Customised versions also available Emergency Stop Single Push Button Stations Part Number Description IPBS-ESTR Red Emergency Stop Twist to release with 1NC Contact & Yellow Enclosure IPBS-ESTR-S Red Emergency Stop Twist to release with 1NC & Yellow Enclosure with protection shroud IPBS-ESKR Red Emergency Stop Key Release with 1NC Contact & Yellow Enclosure IPBS-ESKR-S Red Emergency Stop Key Release with 1NC & Yellow Enclosure with protection shroud Single Push Button Stations Part Number Description IPBS-G Green Push Button with 1NO Contact in a Grey Enclosure IPBS-R Red Push Button with 1NC Contact in a Grey Enclosure IPBS-ESSG Green Mushroom Headed Push Button with 1NO Contact in a Grey Enclosure IPBS-ESSR Red Mushroom Headed Push Button with 1NC Contact in a Grey Enclosure IPBS-SS 90o 2 Position Latching Selector Switch with 1NO Contact in a Grey Enclosure IPBS-SS-3P 45o 3 Position Latching Selector Switch with 2x NO Contacts in a Grey Enclosure IPBS-KS 90o 2 Position Latching Key Switch with 1NO Contact in a Grey Enclosure IPBS-KS-3P 45o 3 Position Latching Key Switch with 2x NO Contacts in a Grey Enclosure Double Push Button Stations Part Number Description IPBS2-RG Green & Red Push Button with 1NC & 1NO Contact in a Grey Enclosure IPBS2-UD White & Black Arrowed Push Buttons with 2x NO Contacts in a Grey Enclosure IPBS2-G-ESTR Green & Emergency Stop Twist Release with 1NO & 1NC Contact in a Grey Enclosure IPBS2-G-ESKR Green & Emergency Stop Key Release with 1NO & 1NC Contact in a Grey Enclosure Triple Push Button Stations Part Number Description IPBS3-FSR Green, Red, Green Push Buttons 1NO 1NC 1NO in a Grey Enclosure IPBS3-UED White & Black Arrowed Push Buttons with Emergency Stop 1NO 1NC 1NO Contacts Grey Enclosure IPBS3-USD White & Black Arrowed Push Buttons with Red Push Button 1NO 1NC 1NO Contacts Grey Enclosure IPBS-ESKR IPBS-ESTR-S IPBS-G IPBS2-UD IPBS2-G-ESKR IPBS3-FSR CONTROL COMPONENTS 61 Web: www.switchtec.com email: [email protected]

CONTROL COMPONENTS CONTROL COMPONENTS Pilot Lamps i Series 22.5mm Pilot Lamps • 22.5mm panel mount • Supplied separately, Head, Lamp Holder & Bulb • Ba9s LED Bulb • Metal bezel & metal coupling • Coupling supplied with the Lamp Holder • Quick fit, easy to install • Colours Red, Green, Yellow, Blue, White • Manufactured to IEC 60947-5-1 • CE & UKCA Approved Part Number Description IPL-R Red 22.5mm Pilot Lamp Head IPL-G IPL-Y Green 22.5mm Pilot Lamp Head IPL-BL IPL-W Yellow 22.5mm Pilot Lamp Head IP-LAMPHOLDER Blue 22.5mm Pilot Lamp Head IP-BA9SLED-24V White 22.5mm Pilot Lamp Head IP-BA9SLED-110V IP-BA9SLED-230V Ba9s Lamp Holder & Coupling for IPL Pilot Lamps. Direct connect (Any Voltage) Ba9s LED Bulb 24V White Ba9s LED Bulb 110V White Ba9s LED Bulb 230V White Coloured LED’s also available PL16 Series 16mm Pilot Lamps • IP65 16mm panel mount • Colours Red, Green, Yellow, Blue, White • 12V, 24V AC/DC, 110V & 230V AC • High visibility in all colours • Long life multi chip LED technology • Low power consumption • Cool running & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved 12VAC/DC 24VAC/DC 110VAC 230VAC Description PL16-12R PL16-24R PL16-110R PL16-230R Red IP65 16mm LED Pilot Lamp PL16-12G PL16-24G PL16-110G PL16-230G Green IP65 16mm LED Pilot Lamp PL16-12Y PL16-24Y PL16-110Y PL16-230Y Yellow IP65 16mm LED Pilot Lamp PL16-12B PL16-24B PL16-110B PL16-230B Blue IP65 16mm LED Pilot Lamp PL16-12W PL16-24W PL16-110W PL16-230W White IP65 16mm LED Pilot Lamp PL16-12R PL16-24G PL16-24Y PL16-110B PL16-230W CONTROL COMPONENTS 62 Telephone: 01785 818600 Fax: 01785 811900

CONTROL COMPONENTS Pilot Lamps CONTROL COMPONENTS PL22 Series 22.5mm Pilot Lamps • IP65 22.5mm panel mount • Colours Red, Green, Yellow, Blue, White • 12V, 24V AC/DC, 110V & 230V AC • High visibility in all colours • Long life multi chip LED technology • Low power consumption • Cool running & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved 12VAC/DC 24VAC/DC 110VAC 230VAC Description PL22-12R PL22-24R PL22-110R PL22-230R Red IP65 22.5mm LED Pilot Lamp PL22-12G PL22-24G PL22-110G PL22-230G Green IP65 22.5mm LED Pilot Lamp PL22-12Y PL22-24Y PL22-110Y PL22-230Y Yellow IP65 22.5mm LED Pilot Lamp PL22-12B PL22-24B PL22-110B PL22-230B Blue IP65 22.5mm LED Pilot Lamp PL22-12W PL22-24W PL22-110W PL22-230W White IP65 22.5mm LED Pilot Lamp PL22-12R PL22-24G PL22-24Y PL22-110B PL22-230W PL22-AI Series 22.5mm Pilot Lamps with Anti-interference Technology • IP65 22.5mm panel mount • Anti-interference technology with transient voltage suppression • Colours Red, Green, Yellow, Blue, White • 24V AC/DC, 110V & 230V AC • High visibility & Long life multi chip LED • Low power consumption • Cool running & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved 24VAC/DC 110VAC 230VAC Description PL22-AI-24R PL22-AI-110R PL22-AI-230R Red IP65 22.5mm LED Pilot Lamp PL22-AI-24G PL22-AI-110G PL22-AI-230G Green IP65 22.5mm LED Pilot Lamp PL22-AI-24Y PL22-AI-110Y PL22-AI-230Y Yellow IP65 22.5mm LED Pilot Lamp PL22-AI-24B PL22-AI-110B PL22-AI-230B Blue IP65 22.5mm LED Pilot Lamp PL22-AI-24W PL22-AI-110W PL22-AI-230W White IP65 22.5mm LED Pilot Lamp All PL Series Pilot lights PL22-AI with built in anti- are fitted with colour interference technology; reducing coded terminal covers the affect of low voltage glow. CONTROL COMPONENTS 63 Web: www.switchtec.com email: [email protected]

CONTROL COMPONENTS CONTROL COMPONENTS Pilot Lamps PL22 Series 22.5mm Lamp Test Pilot Lamps • IP65 22.5mm panel mount • Lamp Test LED with 3rd terminal lamp test input • Colours Red, Green, Yellow, Blue, White • 24V, 110V & 230V AC • High visibility in all colours • Long life multi chip LED technology • Low power consumption • Cool running & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved 24VAC 110VAC 230VAC Description PL22-LT-24R PL22-LT-110R PL22-LT-230R Red IP65 22.5mm Lamp Test LED Pilot Lamp PL22-LT-24G PL22-LT-110G PL22-LT-230G Green IP65 22.5mm Lamp Test LED Pilot Lamp PL22-LT-24Y PL22-LT-110Y PL22-LT-230Y Yellow IP65 22.5mm Lamp Test LED Pilot Lamp PL22-LT-24B PL22-LT-110B PL22-LT-230B Blue IP65 22.5mm Lamp Test LED Pilot Lamp PL22-LT-24W PL22-LT-110W PL22-LT-230W White IP65 22.5mm Lamp Test LED Pilot Lamp PL22-LT-12R PL22-LT-24G PL22-LT-24Y PL22-LT-110B PL22-LT-230W PL22 Series 22.5mm Flashing Pilot Lamps • IP65 22.5mm panel mount • Flashing LED Pilot Lamp 1Hz Flash • Colours Red, Green, Yellow, Blue, White • 24V AC/DC, 110V & 230V AC • High visibility in all colours • Long life multi chip LED technology • Low power consumption • Cool running & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved 24VAC/DC 110VAC 230VAC Description PL22-FL-24R PL22-FL-110R PL22-FL-230R Red IP65 22.5mm Flashing LED Pilot Lamp PL22-FL-24G PL22-FL-110G PL22-FL-230G Green IP65 22.5mm Flashing LED Pilot Lamp PL22-FL-24Y PL22-FL-110Y PL22-FL-230Y Yellow IP65 22.5mm Flashing LED Pilot Lamp PL22-FL-24B PL22-FL-110B PL22-FL-230B Blue IP65 22.5mm Flashing LED Pilot Lamp PL22-FL-24W PL22-FL-110W PL22-FL-230W White IP65 22.5mm Flashing LED Pilot Lamp All PL22-LT Series Lamp Test Pilot lights are fitted with screw retained colour coded terminal covers CONTROL COMPONENTS 64 Telephone: 01785 818600 Fax: 01785 811900

CONTROL COMPONENTS Pilot Lamps CONTROL COMPONENTS SP/SC Series 22.5mm Piezo Alarm & Combined Piezo Alarm & LED Indicator • IP54 22.5mm panel mount • Available with or without LED indication • LED Colours Red, Green, Yellow, Blue, White • Continuous or Pulsating Alarm • LED Indicator & Pulsating Alarm • 12V, 24V AC/DC, 110V & 230V AC • 70db @ 10cm • Low power consumption & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved 12VAC/DC 24VAC/DC 110VAC 230VAC Description SC-22B-12V SC-22B-24V SC-22B-110V SC-22B-230V Black IP54 Continuous Piezo Alarm SP-22B-12V SP-22B-24V SP-22B-110V SP-22B-230V Black IP54 Pulsating Piezo Alarm SP-22R-12V SP-22R-24V SP-22R-110V SP-22R-230V Red IP54 Piezo Alarm & LED Pilot Lamp* SP-22G-12V SP-22G-24V SP-22G-110V SP-22G-230V Green IP54 Piezo Alarm & LED Pilot Lamp* SP-22Y-12V SP-22Y-24V SP-22Y-110V SP-22Y-230V Yellow IP54 Piezo Alarm & LED Pilot Lamp* SP-22BL-12V SP-22BL-24V SP-22BL-110V SP-22BL-230V Blue IP54 Piezo Alarm & LED Pilot Lamp* SP-22W-12V SP-22W-24V SP-22W-110V SP-22W-230V White IP54 Piezo Alarm & LED Pilot Lamp* PL16/PL22 Series Fixing Tool * Pulsating sound, Continuous version also available 16mm Part Number 22mm Part Number Description PL16-FT PL22-FT Fixing tool for PL Series LED Pilot Lamps SP-22B-230V SP-22R-24V SP-22Y-110V SP-22G-230V PL22-FT PL22-VM Series 22.5mm Voltmeter Pilot Lamps • IP65 22.5mm panel mount • 8 Segment LED Display • Colours Red, Green, Yellow, Blue, White • High visibility in all colours • Long life LED Technology • Available for AC or DC circuits • AC version voltage range 50-380VAC • DC version voltage range 10-200VDC • Low power consumption & Vibration resistant • Manufactured to IEC 60947-5-1 • CE & UKCA Approved AC Part Number DC Part Number Description PL22-VMAC-* PL22-VMDC-* 22.5mm IP65 LED Voltmeter Pilot Lamp * = Add to select colour. B = Blue, G = Green, R = RED, W = White, Y = Yellow. ie PL22-VMAC-R is a 50-380VAC RED voltmeter pilot lamp CONTROL COMPONENTS Web: www.switchtec.com email: [email protected] 65

SWITCHGEAR SWITCHGEAR Enclosed Switch Disconnectors TD Series 3 & 4 Pole IP65 Enclosed Switch Disconnectors • 16 to 80 Amp AC21 690V • 3 & 4 Pole • IP65 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • CE, UKCA & TUV Approved • Conforms to IEC/EN 60947-3 • Earth & Neutral terminals included • 6 x Knockouts (16-40Amp M20, 63-80Amp M25) 3 Pole IP65 Enclosed Switch Disconnectors Part Number 440V AC23A Description TD316 3 Kw 16 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD325 5.5 Kw 25 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD332 5.5 Kw 32 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD340 7.5 Kw 40 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD363 11 Kw 63 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD380 18.5 Kw 80 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) 4 Pole IP65 Enclosed Switch Disconnectors Part Number 440V AC23A Description TD416 3 Kw 16 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD425 5.5 Kw 25 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD432 5.5 Kw 32 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD440 7.5 Kw 40 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD463 11 Kw 63 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD480 18.5 Kw 80 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD Series IP65 Enclosed Switch Disconnectors in Larger Enclosure • 16 to 40 Amp AC21 690V • 3 & 4 Pole • IP65 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • CE, UKCA & TUV Approved • Conforms to IEC/EN 60947-3 • Earth & Neutral terminals included • 6 x M25 Knockouts 4 Pole IP65 Enclosed Switch Disconnectors in Large Enclosure Part Number 440V AC23A Description TD416 3 Kw 16 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD425 5.5 Kw 25 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD432 3 Kw 32 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD440 5.5 Kw 40 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) SWITCHGEAR 66 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Enclosed Switch Disconnectors SWITCHGEAR TD Series 6 Pole IP65 Enclosed Switch Disconnectors • 16 to 80 Amp AC21 690V • 6 Pole • IP65 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • CE, UKCA & TUV Approved • Conforms to IEC/EN 60947-3 • Earth & Neutral terminals included • 6 x Knockouts (16-40Amp M20, 63-80Amp M25) 6 Pole IP65 Enclosed Switch Disconnectors Part Number 440V AC23A Description TD625 5.5 Kw 25 Amp 6 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD632 5.5 Kw 32 Amp 6 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD640 7.5 Kw 40 Amp 6 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 128 x 116 x 127mm) TD663 11 Kw 63 Amp 6 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD680 18.5 Kw 80 Amp 6 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 180 x 180 x 142mm) TD Series Additional Poles / Auxiliary Contacts • 16 to 80 Amp AC21 690V • Single Pole Normally Open • Fully rated contact • Suitable for 3 & 4 Pole Switches Only • CE, UKCA & TUV Approved • Conforms to IEC/EN 60947-3 Part Number Description TDS16-AB 16 Amp 1 Normally Open Contact TDS33-AB 32 Amp 1 Normally Open Contact TDS40-AB 40 Amp 1 Normally Open Contact TDS66-AB 63 Amp 1 Normally Open Contact TDS80-AB 80 Amp 1 Normally Open Contact Rear & Base Mount Switch Disconnectors see page 79 Metal Enclosed IP65 Switch Disconnectors see page 71 SWITCHGEAR 67 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Enclosed Switch Disconnectors IS Series 3 & 4 Pole IP65 Enclosed Switch Disconnectors 3 Pole IP65 Enclosed Switch Disconnectors • 20 to 150 Amp AC23A 690V • 3 & 4 Pole • IP65 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • Captive retained cover screws • Conforms to IEC/EN 60947-3. UKCA & CE Approved • Earth & Neutral terminals included • 4 x Knockouts (20-40Amp M20) (63-100Amp M25) Part Number 440V AC23A Description IS320 5.5 Kw 20 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 125 x 100 x 120mm) IS332 11 Kw 32 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 125 x 100 x 120mm) IS340 15 Kw 40 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 175 x 114 x 135mm) IS363 22 Kw 63 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 175 x 114 x 135mm) IS380 30 Kw 80 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 240 x 160 x 165mm) IS3100 37 Kw 100 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 240 x 160 x 165mm) IS3150 55 Kw 150 Amp 3 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 240 x 160 x 165mm) 4 Pole IP65 Enclosed Switch Disconnectors Part Number 440V AC23A Description IS420 5.5 Kw 20 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 125 x 100 x 120mm) IS432 11 Kw 32 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 125 x 100 x 120mm) IS440 15 Kw 40 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 175 x 114 x 135mm) IS463 22 Kw 63 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 175 x 114 x 135mm) IS480 30 Kw 80 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 240 x 160 x 165mm) IS4100 37 Kw 100 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 240 x 160 x 165mm) IS4150 55 Kw 150 Amp 4 Pole IP65 Enclosed Switch Disconnector (Enclosure Dimensions 240 x 160 x 165mm) IS Series 3 & 4 Pole IP65 Enclosed Switch Disconnectors in Larger Enclosure • 20 & 32 Amp AC23A 690V • 3 & 4 Pole • IP65 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • Captive retained cover screws • Conforms to IEC/EN 60947-3. UKCA & CE Approved • Earth & Neutral terminals included • 4 x Knockouts M20/25 3 & 4 Pole IP65 Enclosed Switch Disconnectors in Large Enclosure 3 Pole 4 Pole 440V AC23A Description IS320L IS420L 5.5 Kw 20 Amp IP65 Enclosed Switch Disconnector (Enclosure Dimensions 175 x 114 x 135mm) IS332L IS432L 11 Kw 32 Amp IP65 Enclosed Switch Disconnector (Enclosure Dimensions 175 x 114 x 135mm) SWITCHGEAR 68 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Enclosed Switch Disconnectors SWITCHGEAR IS Series 3 & 4 Pole IP54 Metal Clad Enclosed Switch Disconnectors 3 Pole IP54 Metal Clad Enclosed Switch Disconnectors • 20 to 100 Amp AC23A 690V • 3 & 4 Pole • IP54 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • Captive retained cover screws • Conforms to IEC/EN 60947-3. UKCA & CE Approved • Earth & Neutral terminals included • 4 x Cable Entries (20-40Amp M20) (63-100Amp M25) Part Number 440V AC23A Description ISMC320 5.5 Kw 20 Amp 3 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 147 x 111 x 122mm) ISMC332 11 Kw 32 Amp 3 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 220 x 144 x 132mm) ISMC340 15 Kw 40 Amp 3 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 220 x 144 x 132mm) ISMC363 22 Kw 63 Amp 3 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 220 x 144 x 132mm) ISMC380 30 Kw 80 Amp 3 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 270 x 220 x 151mm) ISMC3100 37 Kw 100 Amp 3 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 270 x 220 x 151mm) 4 Pole IP54 Metal Clad Enclosed Switch Disconnectors Part Number 440V AC23A Description ISMC420 5.5 Kw 20 Amp 4 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 147 x 111 x 122mm) ISMC432 11 Kw 32 Amp 4 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 220 x 144 x 132mm) ISMC440 15 Kw 40 Amp 4 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 220 x 144 x 132mm) ISMC463 22 Kw 63 Amp 4 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 220 x 144 x 132mm) ISMC480 30 Kw 80 Amp 4 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 270 x 220 x 151mm) ISMC4100 37 Kw 100 Amp 4 Pole IP54 Metal Clad Switch Disconnector (Enclosure Dimensions 270 x 220 x 151mm) IS Series Auxiliary Contacts for AC Switches • Side Mount Auxiliary Contact • 1 Pole Normally Open + 1 Pole Normally Closed • 20A rated contact • Suitable for 3 & 4 Pole AC Switches Only • CE Approved • Conforms to IEC/EN 60947-3 • Max 2 Auxiliary contacts on 3 Pole Switches • Max 1 Auxiliary contact on 4 Pole Switches Part Number Description ISAUX-1 Size 1 Auxiliary Contact for 20A & 32A IS Series Switch Disconnectors ISAUX-2 Size 2 Auxiliary Contact for 40A & 63A IS Series Switch Disconnectors ISAUX-3 Size 3 Auxiliary Contact for 80A, 100A & 150A IS Series Switch Disconnectors SWITCHGEAR 69 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Enclosed Switch Disconnectors IS Series 2 Pole 25 Amp IP66 Enclosed DC Switch Disconnector Part Number • 25 Amp DC21B 510V ISDC225 • 2 Pole (1 String) • IP66 Weatherproof enclosure • Padlockable in the off position • Door interlocked handle • Captive retained cover screws • Conforms to IEC/EN 60947-3. UKCA & CE Approved • Earth & Neutral terminals included • 4 x M25 & 2 x M20 threaded cable entries • Dimensions 160 x 85 x 113mm Description 25 Amp 2 Pole IP66 Enclosed DC Switch Disconnector Voltage 510VDC 600VDC 690VDC Amps DC21B 25 Amp 23 Amp 19 Amp TDCI-32 4 Pole 32 Amp 1000V IP66 Enclosed TRUE DC Switch Disconnector • 32 Amp DC21B 1000V • 4 Pole On-Off (1 or 2 String) • Supplied with bridging links • IP66 Weatherproof enclosure • -40oC to +85oC Operating Temperature • Padlockable in the off position • Door interlocked handle • Captive retained cover screws • Conforms to IEC/EN 60947-3 & UKCA/CE Approved • Earth & Neutral terminals included • 4 x M25 threaded cable entries Part Number Description TDCI-32 32 Amp 1000V 4 Pole IP66 Enclosed DC Switch Disconnector (Enclosure Dimensions 188 x 99 x 109mm) 2 Pole (4 Poles in Series) 1 String* 4 Pole (0 Pole in Series) 2 String Voltage Voltage Amperage DC21B 300VDC Amperage DC21B 500VDC 32 Amp 300VDC 32 Amp 600VDC 32 Amp 800VDC 13 Amp 500VDC 32 Amp 1000VDC 9 Amp 9 Amp 600VDC 32 Amp 800VDC 32 Amp 1000VDC 32 Amp * Using bridging links provided SWITCHGEAR 70 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Enclosed Switch Disconnectors SWITCHGEAR NTE Series 3 Pole + Neutral IP65 Metal Enclosed Switch Disconnectors • 63 to 1250 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 RAL7035 Metal weatherproof enclosure • Padlockable in the off position • Defeatable door interlocked handle • IP20 Terminal protection included • Removable top and bottom gland plates • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved Also available with • Door earth lead fitted as standard Red & Yellow Handle. • 3 Pole & 3 Pole with Fixed neutral also available Part Number Amps AC21 Amps AC23 3pH Motor Rating Enclosure Dimensions NTE0063 63 Amp 63 Amp 34.9 Kw 400 x 300 x 150mm NTE0080 80 Amp NTE0125 125 Amp 63 Amp 34.9 Kw 400 x 300 x 150mm NTE0160 160 Amp NTE0200 200 Amp 125 Amp 69.2 Kw 500 x 400 x 200mm NTE0250 250 Amp NTE0315 315 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTE0400 400 Amp NTE0630 630 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTE0800 800 Amp NTE1000 1000 Amp 250 Amp 138.5 Kw 500 x 400 x 200mm NTE1250 1250 Amp 315 Amp 174.5 Kw 800 x 600 x 300mm 400 Amp 221.7 Kw 800 x 600 x 300mm 630 Amp 349.1 Kw 1000 x 800 x 300mm 800 Amp 443.4 Kw 1000 x 800 x 300mm 800 Amp 443.4 Kw 1000 x 800 x 300mm 800 Amp 443.4 Kw 1000 x 800 x 300mm NTE0125 NTE0063 NTE0250 Also available in GRP enclosures, see page 72 SWITCHGEAR 71 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Enclosed Switch Disconnectors NTEG Series 3 Pole + Neutral IP65 GRP Enclosed Switch Disconnectors • 63 to 630 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 RAL7035 GRP weatherproof enclosure • IK10 impact protection • Padlockable in the off position • Defeatable door interlocked handle • IP20 Terminal protection included • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved Also available with • 3 Pole with Fixed neutral also available Red & Yellow Handle. Part Number Amps AC21 Amps AC23 3pH Motor Rating Enclosure Dimensions NTEG0063 63 Amp 63 Amp 34.9 Kw 400 x 300 x 150mm NTEG0080 80 Amp 63 Amp 34.9 Kw 400 x 300 x 150mm NTEG0125 125 Amp 125 Amp 69.2 Kw 500 x 400 x 200mm NTEG0160 160 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTEG0200 200 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTEG0250 250 Amp 250 Amp 138.5 Kw 500 x 400 x 200mm NTEG0315 315 Amp 315 Amp 174.5 Kw 800 x 600 x 300mm NTEG0400 400 Amp 400 Amp 221.7 Kw 800 x 600 x 300mm NTEG0630 630 Amp 630 Amp 349.1 Kw 800 x 600 x 300mm NTE Series 6 & 8 Pole IP65 Metal Enclosed Switch Disconnectors 25-80 Amp • 63 to 200 Amp AC21 • 6 & 8 Pole Switches 125 Amp + • IP65 RAL7035 Metal weatherproof enclosure • Removable top and bottom gland plates • Padlockable in the off position • Defeatable* door interlocked handle • IP20 Terminal protection included • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified • UKCA & CE Approved • Auxiliary contacts available, see page 86 6 Pole Part No 8 Pole Part No Amps AC21 Amps AC23 3pH Motor Rating Enclosure Dimensions NTE0025-6 NTE0025-8 25 Amp 20 Amp 10 Kw 300 x 200 x 150mm NTE0040-6 NTE0040-8 40 Amp 32 Amp 16 Kw 300 x 200 x 150mm NTE0080-6 NTE0080-8 80 Amp 45 Amp 22 Kw 300 x 200 x 150mm 6 Pole Part No 8 Pole Part No Amps AC21 Amps AC23 3pH Motor Rating Enclosure Dimensions NTE0125-6 NTE0125-8 125 Amp 125 Amp 69.2 Kw 500 x 400 x 200mm NTE0160-6 NTE0160-8 160 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTE0200-6 NTE0200-8 200 Amp 200 Amp 110.8 Kw 500 x 400 x 200mm * 125A & above • 25 to 80 Amp manufactured using Telergon ZBK Switches. 125 Amp & above manufactured using Telergon S6N Switches SWITCHGEAR 72 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR SWITCHGEAR Enclosed Fuse Switches ESFS Single Phase Metal Clad Fused Switch • Single phase fused switch • Supplied with 63, 80 & 100 Amp fuses • 100 Amp AC-22A main switch • IP20 Metal clad enclosure • 2 x 25mm & 6 x 32mm Cable entries • Earth & Neutral terminals included • Cable sizes 2.5-50mm2 • 22 x 58 Cylindrical fuse • Conforms to IEC/EN 60947-3 • UKCA & CE Approved Part Number Description ESFS-1002PF Single Phase Metal Clad Fused Switch with 63, 80 & 100A Fuses (Enclosure Dimensions 238 x 125 x 102mm) NTFS Series 4 Pole IP65 Metal Enclosed Fused Switches • 32 to 125 Amp AC23A 690VAC • 4 Pole (3P+N) • IP65 RAL7035 Metal weatherproof enclosure • Door interlocked handle • Padlockable in the off position • IP20 Touch proof terminals • Removable top and bottom gland plates • Conforms to IEC/EN 60947-3 • UKCA & CE Approved • Door earth lead fitted as standard • Supplied complete with Fuses Part Number 440V AC23A Fuse Description NTFS432 11 Kw 10 x 38mm 32 Amp 4 Pole IP65 Metal Enclosed Fused Switch (Enclosure Dimensions 300 x 200 x 150mm) NTFS463 22 Kw 22 x 58mm 63 Amp 4 Pole IP65 Metal Enclosed Fused Switch (Enclosure Dimensions 400 x 300 x 150mm) NTFS480 30 Kw 22 x 58mm 80 Amp 4 Pole IP65 Metal Enclosed Fused Switch (Enclosure Dimensions 400 x 300 x 150mm) NTFS4100 37 Kw 22 x 58mm 100 Amp 4 Pole IP65 Metal Enclosed Fused Switch (Enclosure Dimensions 400 x 300 x 150mm) NTFS4125 45 Kw 22 x 58mm 125 Amp 4 Pole IP65 Metal Enclosed Fused Switch (Enclosure Dimensions 400 x 300 x 150mm) Need a Stainless Steel enclosures? Need an additional Emergency Stop push button fitting? Special builds available. Please contact sales for further details. SWITCHGEAR 73 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Enclosed Switch Fuses NTF Series 3 Pole + Neutral IP65 Metal Enclosed Switch Fuses • 63 to 800 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 RAL7035 Metal weatherproof enclosure • Padlockable in the off position • Defeatable door interlocked handle • IP20 Terminal protection included • Removable top and bottom gland plates • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved Also available with • Door earth lead fitted as standard Red & Yellow Handle. • Supplied with or without BS88 Fuses Part Number Part Number Amps AC21 Amps AC23 3pH Motor BS Fuse Enclosure Dimensions without Fuses with Fuses Rating Size NTF0063 NTF0063F 63 Amp 63 Amp 30 Kw A2-A3 400 x 400 x 200mm NTF0100 NTF0100F 100 Amp 100 Amp 55 Kw A2-A3 400 x 400 x 200mm NTF0160 NTF0160F 160 Amp 160 Amp 90 Kw B1-B2 500 x 400 x 200mm NTF0200 NTF0200F 200 Amp 200 Amp 110 Kw B1-B2 500 x 400 x 200mm NTF0250 NTF0250F 250 Amp 250 Amp 132 Kw B1-B2 500 x 400 x 200mm NTF0315 NTF0315F 315 Amp 315 Amp 160 Kw B1-B3 800 x 600 x 300mm NTF0400 NTF0400F 400 Amp 400 Amp 220 Kw B1-B4 800 x 600 x 300mm NTF0630 NTF0630F 630 Amp 630 Amp 355 Kw C1-C2 1000 x 800 x 300mm NTF0800 NTF0800F 800 Amp 800 Amp 355 Kw C1-C3 1000 x 800 x 300mm NTFG Series 3 Pole + Neutral IP65 GRP Enclosed Switch Fuses • 63 to 400 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 RAL7035 GRP weatherproof enclosure • IK10 impact protection • Padlockable in the off position • Defeatable door interlocked handle • IP20 Terminal protection included • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved Also available with • Supplied with or without BS88 Fuses Red & Yellow Handle. Part Number Part Number Amps AC21 Amps AC23 3pH Motor BS Fuse Enclosure Dimensions without Fuses with Fuses Rating Size NTFG0063 NTFG0063F 63 Amp 63 Amp 30 Kw A2-A3 400 x 400 x 200mm NTFG0100 NTFG0100F 100 Amp 100 Amp 55 Kw A2-A3 400 x 400 x 200mm NTFG0160 NTFG0160F 160 Amp 160 Amp 90 Kw B1-B2 500 x 400 x 200mm NTFG0200 NTFG0200F 200 Amp 200 Amp 110 Kw B1-B2 500 x 400 x 200mm NTFG0250 NTFG0250F 250 Amp 250 Amp 132 Kw B1-B2 500 x 400 x 200mm NTFG0315 NTFG0315F 315 Amp 315 Amp 160 Kw B1-B3 800 x 600 x 300mm NTFG0400 NTFG0400F 400 Amp 400 Amp 220 Kw B1-B4 800 x 600 x 300mm SWITCHGEAR 74 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Enclosed Changeover Switches SWITCHGEAR IC Series 2 & 4 Pole Enclosed Changeover Switches • 20 to 100 Amp AC21 690V • 2 & 4 Pole • IP65 Weatherproof enclosure • 3 Position rotary handle (centre off) • Captive retained cover screws • Conforms to IEC/EN 60947-3 • UKCA & CE Approved • Earth & Neutral terminals included • 4 x Knockouts (20-40Amp M20/25) (63-100Amp M25/32) 3 Position Centre Off Changeover Switches (1-0-2) 2 Pole Part No 4 Pole Part No AC23A Description IC220 IC420 3.7 Kw 20 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 125 x 100 x 120mm) IC240 IC440 7.5 Kw 40 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 175 x 114 x 135mm) IC263 IC463 15 Kw 63 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 240 x 160 x 215mm) IC280 IC480 18.5 Kw 80 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 240 x 160 x 215mm) IC2100 IC4100 22 Kw 100 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 240 x 160 x 215mm) 2 Position No Off Changeover Switches (1-2) 2 Pole Part No 4 Pole Part No AC23A Description 40 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 175 x 114 x 135mm) CH240 CH440 7.5 Kw NTCZ Series 4 Pole Metal Enclosed Changeover Switches (1-0-2) • 40 & 63 Amp AC21 690V • 4 Pole • IP65 RAL7035 Metal Weatherproof enclosure • Removable top and bottom gland plates • 3 Position rotary handle (centre off) • Padlockable in the off position • Door earth lead fitted • Conforms to IEC/EN 60947-3 • UL, EAC, CCC, UKCA & CE Approved Part Number AC23A Description 9 Kw 40 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 400 x 300 x 150mm) NTCZ0040 15 Kw 63 Amp IP65 Enclosed Changeover Switch (Enclosure Dimensions 400 x 300 x 150mm) NTCZ0063 Also available from Switchtec, Switch Disconnectors for PV & HVDC Switching SWITCHGEAR 75 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Enclosed Changeover Switches NTC Series 3 Pole + Neutral IP65 Metal Enclosed Changeover Switches (1-0-2) • 125 to 1250 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 RAL7035 Metal weatherproof enclosure • Padlockable in the off position • Defeatable door interlocked handle • IP20 Terminal protection included • Removable top and bottom gland plates • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved Also available with • Door earth lead fitted as standard Red & Yellow Handle. • Supplied with bridging links Part Number Amps AC21 Amps AC23 3pH Motor Rating Enclosure Dimensions NTC50125 125 Amp 125 Amp 69.2 Kw 500 x 400 x 200mm NTC50160 160 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTC50200 200 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTC0200 200 Amp 160 Amp 80 Kw 800 x 600 x 300mm NTC0250 250 Amp 180 Amp 90 Kw 800 x 600 x 300mm NTC0315 315 Amp 200 Amp 100 Kw 800 x 600 x 300mm NTC0400 400 Amp 250 Amp 125 Kw 800 x 600 x 300mm NTC0630 630 Amp 500 Amp 250 Kw 1000 x 800 x 300mm NTC0800 800 Amp 630 Amp 315 Kw 1000 x 800 x 300mm NTC1000 1000 Amp 800 Amp 501 Kw 1000 x 800 x 300mm NTC1250 1250 Amp 800 Amp 626 Kw 1000 x 800 x 300mm NTCG Series 3 Pole + Neutral IP65 GRP Enclosed Changeover Switches (1-0-2) • 125 to 400 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 RAL7035 GRP weatherproof enclosure • IK10 impact protection • Padlockable in the off position • Defeatable door interlocked handle • IP20 Terminal protection included • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved • Supplied with bridging links Also available with Red & Yellow Handle. Part Number Amps AC21 Amps AC23 3pH Motor Rating Enclosure Dimensions NTC5G0125 125 Amp 125 Amp 69.2 Kw 500 x 400 x 200mm NTC5G0160 160 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTC5G0200 200 Amp 160 Amp 88.6 Kw 500 x 400 x 200mm NTCG0200 200 Amp 160 Amp 80 Kw 800 x 600 x 300mm NTCG0250 250 Amp 180 Amp 90 Kw 800 x 600 x 300mm NTCG0315 315 Amp 200 Amp 100 Kw 800 x 600 x 300mm NTCG0400 400 Amp 250 Amp 125 Kw 800 x 600 x 300mm SWITCHGEAR 76 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Automatic Transfer Switches (ATS) SWITCHGEAR Mains - Standby Supply Automatic Transfer Switches • Single or Three Phase ATS • Mechanically & Electrically interlocked contactors • AC1 rated contactors to BS EN 60947-6-1 • Removeable top and bottom gland plates • IP65 Enclosure • Auto / Manual test switch • Designed for Mains - Generator or Mains - Mains • Two wire generator start • Configurable timers • Panel status LED indicators • Available up to 1250A • Custom designs available Single Phase Three Phase Description 240VAC 400VAC ATS40A1PHM-S ATS40A3PHM-S 40 Amp IP65 Metal Enclosed Mains - Standby ATS (Enclosure Dimensions 400 x 300 x 200mm) ATS60A1PHM-S ATS60A3PHM-S 60 Amp IP65 Metal Enclosed Mains - Standby ATS (Enclosure Dimensions 400 x 300 x 200mm) ATS100A1PHM-S ATS100A3PHM-S 100 Amp IP65 Metal Enclosed Mains - Standby ATS (Enclosure Dimensions 400 x 300 x 200mm) ATS125A1PHM-S ATS125A3PHM-S 125 Amp IP65 Metal Enclosed Mains - Standby ATS (Enclosure Dimensions 400 x 300 x 200mm) Description & Function A range of ATS panels to be used where the local Mains (primary) supply is backed up by a generating* set or secondary power supply. The ATS panel monitors the local Mains supply and will switch to the secondary if this should fail or fall outside pre-set limits. The ATS panel controls the switching of the load from the Mains supply to the standby supply. On return of the Mains supply the ATS panel will monitor it to ensure it is stable and then transfer the load from the standby back to the Mains supply. If the secondary supply is a generator, at this point the ATS panel will request the generator to stop. A phase failure relay is used for Mains voltage monitoring and offers under and over voltage protection as well as phase sequence. The panel uses two timer relays to control timing functions in the panel. Timer one is used to control the Mains restoration period, this controls the period the Mains supply has to be healthy before engaging the Mains contactor. Timer two controls the standby settling period, this timer is useful for situations when the standby supply is a generator as it ensures the generator has ran up to speed and stabilized before a load is applied to the generator. The default setting for the primary Mains restoration period is one minute and timer two is set for 15 seconds. (Both are fully adjustable). The generator start signal is by means of volt free normally open (N/O) contact closing when the generator is required to run. A two position on selector switch is used for control. In the AUTO position on all operations are automatic with the panel switching to the standby supply when there is a failure of the primary Mains supply. The second position - TEST - switches the load to the secondary supply (The start signal is given to the generator). Cable entry as standard is arranged for bottom entry with a direct connection into the contactors. A 16A auxiliary output is provided for use with battery chargers, water jacket heaters etc. *The Generator is required to have a 2 wire start / Auto start facility Available up to 1250A. Custom designs also available. SWITCHGEAR 77 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Enclosed Stud Terminals ST Series Enclosed Stud Terminal Blocks • 4 Pole enclosed stud terminals • Cable size 50, 95, 150 & 240mm2 • Metal or GRP Enclosures • Metal IP65 RAL7035 weatherproof enclosure • GRP IP66 RAL7035 weatherproof enclosure • Metal Enclosure has removable top & bottom gland plates. • GRP Enclosure has IK10 impact protection • Supplied with phase colour coded covers • Conforms to EN6947-7-1, UKCA & CE Approved • Customised versions available Metal Part No (Dimensions) GRP Part No (Dimensions) Description STJB50M (400x300x150mm) STJB50G (400x300x200mm) 150 Amp 4 Pole Enclosed Stud Terminal M8 50mm2 STJB95M (500x400x200) STJB95G (500x400x200mm) 232 Amp 4 Pole Enclosed Stud Terminal M8 95mm2 STJB150M (600x400x200) STJB150G (600x400x230mm) 309 Amp 4 Pole Enclosed Stud Terminal M12 150mm2 STJB240M (800x600x300) STJB240G (800x600x300mm) 415 Amp 4 Pole Enclosed Stud Terminal M12 240mm2 For more information on our range of Stud Terminals, see page 46 Panel Mount True DC Switch Disconnector TDCI-DR 4 Pole 32 Amp 1000V DIN Rail Mount TRUE DC Switch Disconnector • 32 Amp DC21B 1000V • 4 Pole (1 or 2 String) • DIN rail mount • Supplied with direct handle fitted • Padlockable in the off position • Conforms to IEC/EN 60947-3 • UKCA & CE Approved • Bridging links included Part Number Description TDCI-32-DR 32 Amp 1000V 4 Pole True DC Switch Disconnector DIN Rail Mount 2 Pole (2 Poles in Series) 1 String* 4 Pole (0 Pole in Series) 2 String Voltage Amperage DC21B Voltage Amperage DC21B 500VDC 32 Amp 500VDC 32 Amp 600VDC 32 Amp 600VDC 13 Amp 800VDC 32 Amp 800VDC 9 Amp 1000VDC 32 Amp 1000VDC 9 Amp * Using bridging links provided SWITCHGEAR 78 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Panel Mount Switches SWITCHGEAR IS Series 3 & 4 Pole Panel Mount Switch Disconnectors • On-Off Switch Disconnector • 20 to 100 Amp AC21 • Panel mounted switch & handle • IP55 handle • IP20 terminals • Padlockable in the off position • UKCA & CE Approved • Conforms to IEC60947-3 3 Pole Part No 4 Pole Part No 440V AC23A Description IS320-PM IS420-PM 5.5 Kw 20A Panel Mount Switch Disconnector with Red & Yellow Handle IS332-PM IS432-PM 11 Kw 32A Panel Mount Switch Disconnector with Red & Yellow Handle IS340-PM IS440-PM 15 Kw 40A Panel Mount Switch Disconnector with Red & Yellow Handle IS363-PM IS463-PM 22 Kw 63A Panel Mount Switch Disconnector with Red & Yellow Handle IS380-PM IS480-PM 30 Kw 80A Panel Mount Switch Disconnector with Red & Yellow Handle IS3100-PM IS4100-PM 37 Kw 100A Panel Mount Switch Disconnector with Red & Yellow Handle IS Series 3 & 4 Pole Door Interlock Switch Disconnectors • On-Off Switch Disconnector • 20 to 150 Amp AC21 • Rear Panel / DIN Rail mounted switch • Red & Yellow Door Interlocked handle • IP55 handle • IP20 terminals • Padlockable in the off position • UKCA & CE Approved • Conforms to IEC60947-3 3 Pole Part No 4 Pole Part No 440V AC23A Description IS320-DI IS420-DI 5.5 Kw 20A Door Interlock Switch Disconnector with Red & Yellow Handle IS332-DI IS432-DI 11 Kw 32A Door Interlock Switch Disconnector with Red & Yellow Handle IS340-DI IS440-DI 15 Kw 40A Door Interlock Switch Disconnector with Red & Yellow Handle IS363-DI IS463-DI 22 Kw 63A Door Interlock Switch Disconnector with Red & Yellow Handle IS380-DI IS480-DI 30 Kw 80A Door Interlock Switch Disconnector with Red & Yellow Handle IS3100-DI IS4100-DI 37 Kw 100A Door Interlock Switch Disconnector with Red & Yellow Handle IS3150-DI IS4150-DI 55 Kw 150A Door Interlock Switch Disconnector with Red & Yellow Handle Panel Mount Switches from 20 Amp up to 6000 Amps see page 83 SWITCHGEAR 79 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Cam Switches Panel Mount On - Off Cam Switches • 4 Hole fixing • IP65 when installed in IP rated enclosure • Supplied complete with legend plate and fixings • IP20 Touch proof terminals • Ergonomic handle with position indicator • Manufactured to IEC 60947-3 • cULus, UKCA & CE Approved • 22mm Single hole fixing version also available Amperage AC21A 1 Pole 2 Pole 3 Pole 4 Pole 16 Amps T-0001200010E1N1 T-0001200011E1N1 T-0001200012E1N1 T-0001200013E1N1 25 Amps T-0002000010E1N1 T-0002000011E1N1 T-0002000012E1N1 T-0002000013E1N1 32 Amps T-0002500010E1N1 T-0002500011E1N1 T-0002500012E1N1 T-0002500013E1N1 40 Amps T-0003200010E1N1 T-0003200011E1N1 T-0003200012E1N1 T-0003200013E1N1 63 Amps T-0005000010E1N1 T-0005000011E1N1 T-0005000012E1N1 T-0005000013E1N1 80 Amps T-0006300010E1N1 T-0006300011E1N1 T-0006300012E1N1 T-0006300013E1N1 125 Amps T-0001000010E1N1 T-0001000011E1N1 T-0001000012E1N1 T-0001000013E1N1 Panel Mount Changeover Cam Switches • 4 Hole fixing • IP65 when installed in IP rated enclosure • Supplied complete with legend plate and fixings • IP20 Touch proof terminals • Ergonomic handle with position indicator • Manufactured to IEC 60947-3 • cULus, UKCA & CE Approved • 22mm Single hole fixing version also available 3 Position I-0-II Changeover Cam Switches Amperage AC21A 1 Pole 2 Pole 3 Pole 4 Pole 16 Amps T-0001200400E1N1 T-0001200401E1N1 T-0001200402E1N1 T-0001200403E1N1 25 Amps T-0002000400E1N1 T-0002000401E1N1 T-0002000402E1N1 T-0002000403E1N1 32 Amps T-0002500400E1N1 T-0002500401E1N1 T-0002500402E1N1 T-0002500403E1N1 40 Amps T-0003200400E1N1 T-0003200401E1N1 T-0003200402E1N1 T-0003200403E1N1 63 Amps T-0005000400E1N1 T-0005000401E1N1 T-0005000402E1N1 T-0005000403E1N1 80 Amps T-0006300400E1N1 T-0006300401E1N1 T-0006300402E1N1 T-0006300403E1N1 125 Amps T-0010000400E1N1 T-0010000401E1N1 T-0010000402E1N1 T-0010000403E1N1 2 Position (No Off) I-II Changeover Cam Switches Amperage AC21A 1 Pole 2 Pole 3 Pole 4 Pole 16 Amps T-0001200500E1N1 T-0001200501E1N1 T-0001200502E1N1 T-0001200503E1N1 25 Amps T-0002000500E1N1 T-0002000501E1N1 T-0002000502E1N1 T-0002000503E1N1 32 Amps T-0002500500E1N1 T-0002500501E1N1 T-0002500502E1N1 T-0002500503E1N1 40 Amps T-0003200500E1N1 T-0003200501E1N1 T-0003200502E1N1 T-0003200503E1N1 63 Amps T-0005000500E1N1 T-0005000501E1N1 T-0005000502E1N1 T-0005000503E1N1 80 Amps T-0006300500E1N1 T-0006300501E1N1 T-0006300502E1N1 T-0006300503E1N1 125 Amps T-0010000500E1N1 T-0010000501E1N1 T-0010000502E1N1 T-0010000503E1N1 SWITCHGEAR 80 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Cam Switches SWITCHGEAR Panel Mount Cam Switches (Ammeter, Voltmeter, Reversing, Star Delta & Dahlander) • AC21 Ratings, 16 Amp or 25 Amp • 4 Hole fixing • IP65 when installed in IP rated enclosure • Supplied complete with legend plate and fixings • IP20 Touch proof terminals • Ergonomic handle with position indicator • Manufactured to IEC 60947-3 • cULus, UKCA & CE Approved • 22mm Single hole fixing version also available Part Number Description T-0001200727E1N1 Ammeter Panel Mount Cam Switch 16 Amp AC21 2 Pole 3 Lines 3CT's T-0001200731E1N1 Ammeter Panel Mount Cam Switch 16 Amp AC21 1 Pole 3CT's T-0001200701E1N1 Voltmeter Panel Mount Cam Switch 16 Amp AC21 Phase to Phase T-0001200702E1N1 Voltmeter Panel Mount Cam Switch 16 Amp AC21 Phase to Neutral T-0001200705E1N1 Voltmeter Panel Mount Cam Switch 16 Amp AC21 Phase to Phase & Phase to Neutral T-0002000102E1N1 Motor Reversing Panel Mount Cam Switch 25 Amp AC21 3 Phase Changeover T-0002000300E1N1 Star Delta Panel Mount Cam Switch 25 Amp AC21 3 Phase T-0002000331E1N1 Dahlander Panel Mount Cam Switch 25 Amp AC21 3 Phase Other amperages & switching diagrams also available Panel Mount Multi-step Cam Switches • Step Switch, one contact closed in each position • 16 Amp AC21 • 4 Hole fixing • IP65 when installed in IP rated enclosure • Supplied complete with legend plate and fixings • IP20 Touch proof terminals • Ergonomic handle with position indicator • Manufactured to IEC 60947-3. • cULus, UKCA & CE Approved • 22mm Single hole fixing version also available Positions 1 Pole 2 Pole 3 Pole 4 Pole 2 T-0001200410E1N1 T-0001200420E1N1 T-0001200430E1N1 T-0001200440E1N1 T-0001200411E1N1 T-0001200421E1N1 T-0001200431E1N1 T-0001200441E1N1 3 T-0001200412E1N1 T-0001200422E1N1 T-0001200432E1N1 T-0001200442E1N1 4 T-0001200413E1N1 T-0001200423E1N1 T-0001200433E1N1 T-0001200443E1N1 5 T-0001200414E1N1 T-0001200424E1N1 T-0001200434E1N1 T-0001200444E1N1 6 T-0001200415E1N1 T-0001200425E1N1 T-0001200435E1N1 T-0001200445E1N1 7 T-0001200416E1N1 T-0001200426E1N1 T-0001200436E1N1 T-0001200446E1N1 8 T-0001200417E1N1 T-0001200427E1N1 T-0001200437E1N1 T-0001200447E1N1 9 T-0001200418E1N1 T-0001200428E1N1 T-0001200438E1N1 T-0001200448E1N1 10 SWITCHGEAR 81 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Panel Mount Switches ZBK Series 3, 4, 6 & 8 Pole Base Mount Door Interlocked Switch Disconnectors • 20 to 125 Amp AC21 690V • 3, 4, 6 & 8 Pole • Padlockable in the off position • IP65 Door interlocked handle • 22mm Single hole fixing* • High breaking capacity & contact pressure • Supplied with Red & Yellow handle & 100mm shaft • Conforms to IEC/EN 60947-3 • UL, EAC, CCC & CE Approved 3 & 4 Pole Base Mount Door Interlocked Switch Disconnectors * If 4 hole fixing, J3631N+D accessory required 3 Pole Part No 4 Pole Part No AC23A Description ZBK20VZVHN4A3 ZBK20VZVHN4A4 4 Kw 20 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK25VZVHN4A3 ZBK25VZVHN4A4 5.5 Kw 25 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK40VZVHN4A3 ZBK40VZVHN4A4 9 Kw 40 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK63VZVHN4A3 ZBK63VZVHN4A4 15 Kw 63 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK80VZVHN4A3 ZBK80VZVHN4A4 15 Kw 80 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK125VZVHN4A3 ZBK125VZVHN4A4 30 Kw 125 Amp IP65 Base Mount Door Interlocked Switch Disconnector 6 & 8 Pole Base Mount Door Interlocked Switch Disconnectors 6 Pole Part No 8 Pole Part No AC23A Description ZBK25VZVHN4A6 ZBK25VZVHN4A8 5.5 Kw 25 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK40VZVHN4A6 ZBK40VZVHN4A8 9 Kw 40 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK80VZVHN4A6 ZBK80VZVHN4A8 15 Kw 80 Amp IP65 Base Mount Door Interlocked Switch Disconnector ZBK Accessories Part Number Description ZBK-0002 200mm Extension Shaft for ZBK Switches ZBK-0003 300mm Extension Shaft for ZBK Switches ZBK-0004 400mm Extension Shaft for ZBK Switches ZBKLH11X* 1 Normally Open + 1 Normally Closed Auxiliary Contact Block (Early Make, Late Break) ZBKLH20V/02E* 2 Normally Open Auxiliary Contact Block * Not suitable for 125A Switches ZBK Series 4 Pole Base Mount Door Interlocked Changeover Switches (1-0-2) • 40 & 63 Amp AC21 690V • 4 Pole Changeover (1-0-2) • Padlockable in the off position • IP65 Door interlocked handle • 22mm Single hole fixing* • High breaking capacity & contact pressure • Supplied with Grey & Black handle & 100mm shaft • Conforms to IEC/EN 60947-3 • UL, EAC, CCC & CE Approved * If 4 hole fixing, J3631N+D accessory required 4 Pole Base Mount Door Interlocked Changeover Switches Part Number AC23A Description ZBK40VZVH4U4 9 Kw 40 Amp 4 Pole IP65 Base Mount Door Interlocked Changeover Switch ZBK63VZVH4U4 15 Kw 63 Amp 4 Pole IP65 Base Mount Door Interlocked Changeover Switch SWITCHGEAR 82 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Panel Mount Switch Disconnectors SWITCHGEAR S5000 Series 4 Pole (3P+N) Base Mount Door Interlocked Switch Disconnectors • 40 to 1250 Amp AC21 • Available up to 6300 Amp • 3 Pole & Switched Neutral (4th Pole) • IP65 Handles padlockable in the off position • Defeatable door interlock • IP20 Terminal protection shrouds • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved • Supplied as a Kit or as a component • 3 Pole with Fixed neutral also available Kit Part Number Switch Handle *² Shrouds *³ Description PMSDK00403NB S5-00403NB0*¹ DS-SA01 N/A 40A 3P+N Blue Handle & 177mm Shaft PMSDK00633NB S5-00633NB0*¹ DS-SA01 N/A 63A 3P+N Blue Handle & 177mm Shaft PMSDK00803NB S5-00803NB0*¹ DS-SA01 N/A 80A 3P+N Blue Handle & 177mm Shaft PMSDK01253NB S5-01253NB0*¹ DS-SA01 N/A 125A 3P+N Blue Handle & 177mm Shaft PMSDK01253NS S5-01253NS0 DS-SA01 DS-CU04 125A 3P+N Blue Handle & 177mm Shaft PMSDK01603NB S5-01603NB0*¹ DS-SA01 N/A 160A 3P+N Blue Handle & 177mm Shaft PMSDK01603NS S5-01603NS0 DS-SA01 DS-CU04 160A 3P+N Blue Handle & 177mm Shaft PMSDK02003NS S5-02003NS0 DS-SA01 DS-CU07 200A 3P+N Blue Handle & 177mm Shaft PMSDK02503ND S5-02503ND0*⁴ DS-SA01 DS-CU07 250A 3P+N Blue Handle & 177mm Shaft PMSDK02503NR S5-02503NR0 DS-SA11 DS-CU11 250A 3P+N Blue Handle & 227mm Shaft PMSDK03153NR S5-03153NR0 DS-SA11 DS-CU11 315A 3P+N Blue Handle & 227mm Shaft PMSDK04003NC S5-04003NC0 DS-SA11 DS-CU12 400A 3P+N Blue Handle & 227mm Shaft PMSDK06303NR S5-06303NR0 DS-LA21 DS-CU21 630A 3P+N Blue Handle & 195mm Shaft PMSDK08003NC S5-08003NC0 DS-LA21 DS-CU21 800A 3P+N Blue Handle & 195mm Shaft PMSDK12503NC S5-12503NC0 DS-LA31 DS-CU31 1250A 3P+N Blue Handle & 186mm Shaft *¹ IP20 Rising clamp terminals. All other switches lug terminals Red & Yellow handles on page 86 *² Standard size shaft included with handle *³ 2 Shrouds per switch supplied/needed *⁴ Compact version Extension shafts & Auxiliarycontacts on page 86 Rating 40A 63A 80A 125A 160A 200A 250A*⁴ 250A 315A 400A 630A 800A 1250A AC22 400V 50A 63A 80A 125A 160A 200A 250A 250A 315A 400A 630A 800A 1250A AC23 400V 50A 63A 63A 125A 160A 160A 160A 250A 315A 400A 630A 800A 1000A Power 3x 400V 28kW 35kW 35kW 69kW 89kW 89kW 89kW 138kW 174kW 222kW 349kW 443kW 554kW S5-01253NB0 S5-02503ND0 S5-08003NC0 SWITCHGEAR 83 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Panel Mount Switch Fuses M11/M21 Series 4 Pole (3P+N) Base Mount Door Interlocked Switch Fuses • 32 to 800 Amp AC21 • 3 Pole & Switched Neutral (4th Pole) • IP65 Handles padlockable in the off position • Defeatable door interlock • IP20 Terminal protection shrouds • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/CE Approved • Supplied as a Kit or as a component Kit Part Number Switch Handle *² Shrouds *³ BS Fuse Description Size PMSFK00323N M1100323NBBA0*¹ DS-SA02 N/A A1 32A 3P+N Handle & 250mm Shaft PMSFK00633N M1100633NBBB0*¹ DS-SA02 N/A A2-A3 63A 3P+N Handle & 250mm Shaft PMSFK01003N M1101003NBB00*¹ DS-SA02 N/A A2-A3 100A 3P+N Handle & 250mm Shaft PMSFK01603N M2101603NSB10# DS-SA11 DM2CU13 B1-B2 160A 3P+N Handle & 227mm Shaft PMSFK02003N M2102003NSB20 DS-SA11 DM2CU13 B1-B2 200A 3P+N Handle & 227mm Shaft PMSFK02503N M2102503NSB20 DS-SA11 DM2CU13 B1-B2 250A 3P+N Handle & 227mm Shaft PMSFK03153N M2103153NSB40 DS-LA22 DM2CU23 B1-B3 315A 3P+N Handle & 239mm Shaft PMSFK04003N M2104003NSB50 DS-LA22 DM2CU23 B1-B4 400A 3P+N Handle & 239mm Shaft PMSFK06303N M2106303NSB70 DS-LA31 DM2CU33 C1-C2 630A 3P+N Handle & 186mm Shaft PMSFK08003N M2108003NJB80 DS-LA31 DM2CU33 C1-C3 800A 3P+N Handle & 186mm Shaft Kits also available with Fuses included, to order add F to end of part number. e.g. PMSFK01603NF *¹ IP20 Rising clamp terminals & side mount handle. All other switches Lug Terminals *² Standard size shaft included with handle *³ 2 Shrouds per switch supplied/needed Extension shafts & Auxiliary contacts available on page 86 BS Fuses & Solid links available on page 87 M1101003NSBB00 + DS-SA02 # 200A Switch suplied Rating 32A 63A 100A 160A 200A 250A 315A 400A 630A 800A 400A 630A 800A AC22 400V 32A 63A 100A 160A 200A 250A 315A 400A 630A 630A 220kW 355kW 355kW AC23 400V 32A 63A 100A 160A 200A 250A 315A B1-B4 C1-C2 C1-C3 Power 3x 400V 15kW 30kW 55kW 90kW 110kW 132kW 160kW Red & Yellow Handle available page 86 Fuse Size A1 A2-A3 A2-A3 A4 B1-B2 B1-B2 B1-B2 M1101003NSBB00 M2101603NSB10 M2108003NSB80 SWITCHGEAR 84 Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR Panel Mount Changeover Switches SWITCHGEAR S5L/CCF Series 4 Pole (3P+N) Base Mount Door Interlocked Changeover Switches (1-0-2) • 125 to 1250 Amp AC21 • Available up to 3150 Amp • 3 Pole & Switched Neutral (4th Pole) • IP65 Handles Padlockable in the off position • Defeatable door interlock • IP20 Terminal protection shrouds • Conforms to IEC/EN 60947-1 & 3 • Bureau Veritas, KEMA certified, UKCA/ CE Approved • Supplied as a Kit or as a component • Kit includes Bridging Links Kit Part Number Switch Handle *² Shrouds A Shrouds B Description 125A 3P+N Handle & 177mm Shaft PMCOKF01253N S5F01253NS0*¹ D5LLA01 DS-CU04 DS-CU04 160A 3P+N Handle & 177mm Shaft PMCOKF01603N S5F01603NS0*¹ D5LLA01 DS-CU04 DS-CU04 200A 3P+N Handle & 177mm Shaft PMCOKF02003N S5F02003NS0*¹ D5LLA01 DS-CU07 200A 3P+N Handle & 227mm Shaft PMCOK02003N CCF02003NS0 DCCLA11 DS-CU07 DCCCU12 250A 3P+N Handle & 227mm Shaft PMCOK02503N CCF02503NS0 DCCLA11 DCCCU12 315A 3P+N Handle & 227mm Shaft PMCOK03153N CCF03153NS0 DCCLA11 DM2CU13*³ DCCCU12 400A 3P+N Handle & 227mm Shaft PMCOK04003N CCF04003NS0 DCCLA11 DM2CU13*³ DCCCU12 630A 3P+N Handle & 195mm Shaft PMCOK06303N CCF06303NS0 DCCLA21 DM2CU13*³ DCCCU22 800A 3P+N Handle & 195mm Shaft PMCOK08003N CCF08003NS0 DCCLA21 DM2CU13*³ DCCCU22 1250A 3P+N Handle & 186mm Shaft PMCOK12503N CCF12503NS0 DCCLA31 DM2CU23*³ DCCCU32 DM2CU23*³ DM2CU33*³ Rating 125A 160A 200A 250A 315A 400A 630A 800A 1250A Bridging Link Amperage AC21 400V 125A 160A 200A 250A 315A 400A 630A 800A 1250A AC22 400V 125A 160A 200A 250A 315A 400A 630A 800A 1000A D5LPC03 125 - 200 Amp Power 3x 400V 69kW 89kW 80kW 90kW 100kW 125kW 250kW 315kW 626kW *¹ S5F Switches require external bridging links D5LPC03 D5LPC03 supplied when ordered as a kit. CCF switches are internally linked *² Standard size shaft included with handle. *³ 2x A (Input) Shrouds per switch supplied/needed Extension shafts & Auxiliary contacts available on page 86 Auxiliary contacts available for position indication. See page 86 S5F02003NS0 CCF02003NS0 CCF04003NS0 SWITCHGEAR 85 Web: www.switchtec.com email: [email protected]

SWITCHGEAR SWITCHGEAR Panel Mount Switch Disconnectors S5/M11/M21/S5L & CCF Panel Mount Switch Disconnector Accessories • Extension Shafts • Red & Yellow Handles • Auxiliary Contacts Extension Shafts Part Number Description DS-EP05 387mm Extension Shaft suitable for S5 40A up to 250ND0, M11 32-100A & S5L 40-160A Switches DS-EP15 536mm Extension Shaft suitable for S5 from 250NR0 to 400A & M21 160A-250A Switches DS-EP24 535mm Extension Shaft suitable for S5 630A-1250A & M21 315A-800A Switches DM2EP11 305mm Extension Shaft suitable for CCF 200-400A Switches DM2EP21 290mm Extension Shaft suitable for CCF 630-800A Switches DM2EP31 275mm Extension Shaft suitable for CCF 1000-1250A Switches Red & Yellow Defeatable door interlocked Handles Part Number Description DS-SR01 For 40A-250ND0 S5 Switches DS-SR02 For M11 32-100A Switches DS-SR11 For 250NR0 to 400A S5 Switches & 160A-250A M21 Switches DS-LR21 For 630A-800A S5 Switches & 315A-400A M21 Switches DS-LR31 For 1000A-1250A S5 Switches & 630A-800A M21 Switches Auxiliary Contacts 1NO & 1NC 2NO & 2 NC Description DS-AU11 DS-AU12 For 125A-200A S5F Switches For 40A-1250A S5 Switches, 160A-800A M21 Switches & 200-1250 CCF Switches D5LAU01 D5LAU02 For M11 32-100A Switches DM1AUB1 DM1AUB2 Metal Clad Modular Enclosures Metal Clad Modular Enclosures • Metal clad enclosure • Metal hinge lid • Supplied with DIN Rail • Earth & Neutral terminals included • 4 or 6 Module • IP30 or IP40 DEKMF-SPC Part Number Dimensions Description DMC4M 237 x 126 x 111mm 4 Module IP30 Metal Clad Enclosure DMC4M DMC6M 257 x 160 x 111mm 6 Module IP40 Metal Clad Enclosure 86 DEKMF-SPC 1/2 module (8.75mm) DIN Rail mount Blank DMC6M SWITCHGEAR Telephone: 01785 818600 Fax: 01785 811900

SWITCHGEAR SWITCHGEAR Fuses, Fuse Holders & Solid Links Cylindrical Fuses, BS88 Fuses & Solid/Neutral Links • 10 x 38mm & 22 x 58mm Cylindrical Fuses • BS88 415VAC 80kA Fuses • 32 Amp to 800 Amp • BS88 Solid/Neutral Links B2-C3 • Manufactured to IEC 60269 • ASTA 20 Certified, UKCA & CE Approved • Motor rated fuses also available Cylindrical Fuses BS88 Solid / Neutral Links Part Number Fuse Size Description Part Number Size Description C10G32(M) 10 x 38mm 32 Amp 500V Fuse SLB2200 B2 200 Amp Solid Link 63 Amp 500V Fuse 315 Amp Solid Link C22G63(M) 22 x 58mm 80 Amp 500V Fuse SLB3315 B3 400 Amp Solid Link 100 Amp 500V Fuse 630 Amp Solid Link C22G80(M) 22 x 58mm 125 Amp 500V Fuse SLB4400 B4 800 Amp Solid Link C22G100(M) 22 x 58mm SLC2630 C2 C22G125(M) 22 x 58mm SLC3800 C3 BS88 Fuses Fuse Size Description Part Number A1 32 Amp 415V BS88 Fuse A3 63 Amp 415V BS88 Fuse NIT32 A3 100 Amp 415V BS88 Fuse TIS63 B2 160 Amp 415V BS88 Fuse TIS100 B2 200 Amp 415V BS88 Fuse CTF160 B3 250 Amp 415V BS88 Fuse CTF200 B3 315 Amp 415V BS88 Fuse TKF250 B4 400 Amp 415V BS88 Fuse TKF315 C2 630 Amp 415V BS88 Fuse TMF400 C3 800 Amp 415V BS88 Fuse TTM630 TLM800 Fuse Holders Cylindrical Fuse Holders • 10 x 38mm Fuse Holders rated to 690V 32A • 22 x 38mm Fuse Holders rated to 690V 125A • DIN Rail Mount • Single Pole and 3 Pole versions • Manufactured to IEC 60269 • IP20 Touchproof terminals Part Number Fuse Size Description DMS-101 10 x 38mm 1 Pole DIN Rail Mount Modular Fuse Holder DMS-103 10 x 38mm 3 Pole DIN Rail Mount Modular Fuse Holder DMS-221 22 x 58mm 1 Pole DIN Rail Mount Modular Fuse Holder DMS-223 22 x 58mm 3 Pole DIN Rail Mount Modular Fuse Holder SWITCHGEAR 87 Web: www.switchtec.com email: [email protected]

POWER POWER Switch Mode Power Supplies HDR Series DIN Rail mount Switch Mode Power Supplies • Compact design • Output 15W to 150W • Input range 85-264VAC / 120-370VDC • Output voltages 12 & 24VDC* • Built in voltage adjustment • Power on LED • Built in overload & over voltage protection • cULus, TUV, EAC, CB, UKCA & CE Approved Part Number Power Input Voltage Dimensions (HxWxD) Output HDR-15-12 15 Watt 85-264VAC / 120-370VDC 90 x 17.5 x 58.5mm 12VDC 1.25 Amps HDR-15-24 15 Watt 85-264VAC / 120-370VDC 90 x 17.5 x 58.5mm 24VDC 0.63 Amps HDR-30-12 30 Watt 85-264VAC / 120-370VDC 90 x 35 x 58.5mm 12VDC 2 Amps HDR-30-24 30 Watt 85-264VAC / 120-370VDC HDR-60-12 60 Watt 85-264VAC / 120-370VDC 90 x 35 x 58.5mm 24VDC 1.5 Amps HDR-60-24 60 Watt 85-264VAC / 120-370VDC HDR-100-12N 100 Watt 85-264VAC / 120-370VDC 90 x 52.5 x 58.5mm 12VDC 4.5 Amps HDR-100-24N 100 Watt 85-264VAC / 120-370VDC 90 x 52.5 x 58.5mm 24VDC 2.5 Amps HDR-150-12 150 Watt 85-264VAC / 120-370VDC 90 x 70 x 58.5mm 12VDC 7.5 Amps HDR-150-24 150 Watt 85-264VAC / 120-370VDC 90 x 70 x 58.5mm 24VDC 4.2 Amps 90 x 105 x 58.5mm 12VDC 11.3 Amps 90 x 105 x 58.5mm 24VDC 6.25 Amps * Other voltages available MDR Series DIN Rail mount Switch Mode Power Supplies • Modular design • Output 10W to 100W • Input range 85-264VAC / 120-370VDC • Output voltages 12 & 24VDC* • Built in voltage adjustment • Power on LED • Built in overload & overvoltage protection • cULus, TUV, UKCA & CE Approved Part Number Power Input Voltage Dimensions (HxWxD) Output MDR-10-12 10 Watt 85-264VAC / 120-370VDC 90 x 22.5 x 100mm 12VDC 0.8 Amps MDR-10-24 10 Watt 85-264VAC / 120-370VDC 90 x 22.5 x 100mm 24VDC 0.4 Amps MDR-20-12 20 Watt 85-264VAC / 120-370VDC 90 x 22.5 x 100mm 12VDC 1.67 Amps MDR-20-24 20 Watt 85-264VAC / 120-370VDC 90 x 22.5 x 100mm 24VDC 1 Amps MDR-40-12 40 Watt 85-264VAC / 120-370VDC 90 x 40 x 100mm 12VDC 3.33 Amps MDR-40-24 40 Watt 85-264VAC / 120-370VDC 90 x 40 x 100mm 24VDC 1.7 Amps MDR-60-12 60 Watt 85-264VAC / 120-370VDC 90 x 40 x 100mm 12VDC 5 Amps MDR-60-24 60 Watt 85-264VAC / 120-370VDC 90 x 40 x 100mm 24VDC 2.5 Amps MDR-100-12 100 Watt 85-264VAC / 120-370VDC 90 x 55 x 100mm 12VDC 7.5 Amps MDR-100-24 100 Watt 85-264VAC / 120-370VDC 90 x 55 x 100mm 24VDC 4 Amps * Other voltages available POWER 88 Telephone: 01785 818600 Fax: 01785 811900

POWER Switch Mode Power Supplies POWER EDR & NDR Series DIN Rail mount Switch Mode Power Supplies • EDR Output 75W to 150W • NDR Output 75W to 480W • Input range 90-264VAC / 127-370VDC • Output voltages 12VDC, 24VDC* • Built in voltage adjustment • Power on LED • Built in overload, over voltage and over temperature protection • cULus, TUV, UKCA & CE Approved EDR Series Power Input Voltage Dimensions (HxWxD) Output Part Number 75 Watt 90-264VAC / 127-370VDC 125.2 x 32 x 102mm 12VDC 6.3 Amps 75 Watt 90-264VAC / 127-370VDC 125.2 x 32 x 102mm 24VDC 3.2 Amps EDR-75-12 120 Watt 90-264VAC / 127-370VDC 125.2 x 40 x 113.5mm 12VDC 10 Amps EDR-75-24 120 Watt 90-264VAC / 127-370VDC 125.2 x 40 x 113.5mm 24VDC 5 Amps EDR-120-12 150 Watt 90-264VAC / 127-370VDC 125.2 x 40 x 113.5mm 24VDC 6.5 Amps EDR-120-24 EDR-150-24 NDR Series Power Input Voltage Dimensions (HxWxD) Output Part Number 75 Watt 90-264VAC / 127-370VDC 125.2 x 32 x 102mm 12VDC 6.3 Amps 75 Watt 90-264VAC / 127-370VDC 125.2 x 32 x 102mm 24VDC 3.2 Amps NDR-75-12 120 Watt 90-264VAC / 127-370VDC 125.2 x 40 x 113.5mm 12VDC 10 Amps NDR-75-24 120 Watt 90-264VAC / 127-370VDC NDR-120-12 240 Watt 90-264VAC / 127-370VDC 125.2 x 40 x 113.5mm 24VDC 5 Amps NDR-120-24 480 Watt 90-264VAC / 127-370VDC NDR-240-24 125.2 x 63 x 113.5mm 24VDC 10 Amps NDR-480-24 125.2 x 85.5 x 128.5mm 24VDC 20 Amps * Other voltages available DRH, DRT & TDR Series 2 & 3 Phase DIN Rail mount Switch Mode Power Supplies • 2 & 3 Phase versions • Output 120W to 960W • Input range 340VAC-550VAC / 480-780VDC • Output voltages 24VDC* • Built in voltage adjustment • Power on LED • Built in overload & overvoltage protection • cULus, TUV, UKCA & CE Approved Part Number Power Input Voltage Dimensions (HxWxD) Output DRH-120-24 120 Watt 340-550VAC / 480-780VDC 125.2 x 65 x 100mm 24VDC 5 Amps DRT-240-24 240 Watt 3 Phase 340-550VAC / 480-780VDC 125.2 x 125.5 x 100mm 24VDC 10 Amps TDR-480-24 480 Watt 3 Phase 340-550VAC / 480-780VDC 125.2 x 85.5 x 128.5mm 24VDC 20 Amps TDR-960-24 960 Watt 3 Phase 340-550VAC / 480-780VDC 125.2 x 110 x 150mm 24VDC 40 Amps * Other voltages available POWER 89 Web: www.switchtec.com email: [email protected]

POWER POWER Single Phase Transformers Single Phase Single Voltage Transformers • Single phase single voltage panel transformers • 50VA up to 1000VA • IP20 touch proof terminals • Designed to EN61558-1 Class E insulation • Varnish impregnation and core earth connection • Also available in 240-110VAC, 415-240VAC & 415VAC-24VAC • UKCA & CE Approved Part Number VA Rating Input Voltage Output Voltage SV0050P4S6 50VA 0/240VAC 0/24VAC SV0100P4S6 100VA 0/240VAC 0/24VAC SV0150P4S6 150VA 0/240VAC 0/24VAC SV0200P4S6 200VA 0/240VAC 0/24VAC SV0250P4S6 250VA 0/240VAC 0/24VAC SV0300P4S6 300VA 0/240VAC 0/24VAC SV0400P4S6 400VA 0/240VAC 0/24VAC SV0500P4S6 500VA 0/240VAC 0/24VAC SV0750P4S6 750VA 0/240VAC 0/24VAC SV1000P4S6 1000VA 0/240VAC 0/24VAC Single Phase Multi Voltage Transformers • Single phase multi voltage panel transformers • 50VA up to 1000VA • IP20 touch proof terminals • Designed to EN61558-1 Class E insulation • Varnish impregnation and core earth connection • Other voltage versions available • UKCA & CE Approved Part Number VA Rating Input Voltage Output Voltage MV0050P1S3 50VA 10/0/220/240VAC 0/12/0/12VAC MV0100P1S3 100VA 10/0/220/240VAC 0/12/0/12VAC MV0150P1S3 150VA 10/0/220/240VAC 0/12/0/12VAC MV0200P1S3 200VA 10/0/220/240VAC 0/12/0/12VAC MV0250P1S3 250VA 10/0/220/240VAC 0/12/0/12VAC MV0300P1S3 300VA 10/0/220/240VAC 0/12/0/12VAC MV0400P1S3 400VA 10/0/220/240VAC 0/12/0/12VAC MV0500P1S3 500VA 10/0/220/240VAC 0/12/0/12VAC MV0750P1S3 750VA 10/0/220/240VAC 0/12/0/12VAC MV1000P1S3 1000VA 10/0/220/240VAC 0/12/0/12VAC Custom built Transformers available upon request. Speak to our sales team for further details. POWER 90 Telephone: 01785 818600 Fax: 01785 811900

MODULAR DEVICES Modular Electronic Timers MODULAR DEVICES H3D-M Multi Function Modular Timer • Multi function, 7 functions • Multi voltage, 12-240VAC/DC • 17.5mm width • Time range 1 second to 100 hours • DIN rail mountable • Power and timing LED • UL, UKCA & CE Approved • 8 Amp contact rating • Time functions a, b, c, d, e, f & g (see page 93) Part Number Description H3D-M SPCO 8 Amp Multi Function DIN Rail Mount Timer 12-240VAC/DC AMY Series 4 Pole 14 Pin Plug In Dual Function Timer • Dual function, On delay & cyclic • 8 adjustable time ranges, 1 second to 600 hours • 4 Pole changeover contacts • 14 Pin plug in • High repeat accuracy • LED indication • UKCA & CE Approved • 5 Amp contact rating Part Number Description AMY-N4-12/24VACDC 4PCO Dual Function Plug In Timer 12/24VACDC AMY-N4-240VAC 4PCO Dual Function Plug In Timer 240VAC 18FF-4Z-C8 14 Pin DIN Rail Mount Socket for AMY Series Other voltages available Mechanical Time Switches NAPA Series Mechanical Time Switches • Daily & Weekly versions • Visual time display • 230VAC • 72mm width • DIN rail, surface or screw panel mount • UKCA & CE Approved • 16 Amp contact rating • 200 Hour supply failure reserve • Minimum time interval: NAPA-D 10 minute NAPA-W 1 hour Part Number Description SPCO 16 Amp Daily (24 Hour) Analogue Time Switch 230VAC NAPA-D SPCO 16 Amp Weekly (168 Hour) Analogue Time Switch 230VAC NAPA-W MODULAR DEVICES Web: www.switchtec.com email: [email protected] 91

MODULAR DEVICES MODULAR DEVICES Modular Electronic Timers STM Series Multi Function Modular Timer • Multi function, 10 functions • Multi voltage, 12-240VAC/DC • Single & Double pole versions • 17.5mm width • Time range 0.1 second to 10 days • DIN rail mountable • Power and timing LED • UKCA & CE Approved • 16 Amp contact rating • Time functions a, b, c, d, e, f, g, h, i & j (see page 93) Part Number Description SPCO 16 Amp Multi Function DIN Rail Mount Timer 12-240VAC/DC STM-10 DPCO 16 Amp Multi Function DIN Rail Mount Timer 12-240VAC/DC STM-102 STT-OD Delay Off Timer without Supply Voltage (True Off Delay) • Delay off function after supply failure • Multi voltage, 12-240VAC/DC • 17.5mm width • Time range 0.1 second to 10 minutes • DIN rail mountable • Power and timing LED • UKCA & CE Approved • Single pole • 16 Amp contact rating Part Number Description STT-OD SPCO 16 Amp Delay Off without Supply Voltage DIN Rail Mount Timer 12-240VAC/DC STD-D Double Stage Delay Off Timer • Delay off function after supply failure • Multi voltage, 12-240VAC/DC • 17.5mm width • Time range 0.1 second to 10 days • DIN rail mountable • Power and timing LED • UKCA & CE Approved • Double pole (Independent timing circuits) • 16 Amp contact rating Part Number Description STD-D DPCO 16 Amp Double Stage Delay Off DIN Rail Mount Timer 12-240VAC/DC 92 MODULAR DEVICES Telephone: 01785 818600 Fax: 01785 811900

MODULAR DEVICES Modular Electronic Timers MODULAR DEVICES STA-C Asymmetric Cycler Timer • Asymmetric cycler function • Multi voltage, 12-240VAC/DC • 17.5mm width • Time range 0.1 second to 10 days • DIN rail mountable • Power and timing LED • UKCA & CE Approved • Single pole • 16 Amp contact rating Part Number Description STA-C SPCO 16 Amp Asymmetric Cycler DIN Rail Mount Timer 12-240VAC/DC STS-D Star Delta Timer • Star - Delta time function • Multi voltage, 12-240VAC/DC Part Number • 17.5mm width STS-D • Star time range 0.1 seconds to 10 Minutes • Delta time range 0.1 second to 1 second • DIN rail mountable • Power and timing LED • UKCA & CE Approved • Single Pole • 16 Amp contact rating Description DPCO 16 Amp Star Delta DIN Rail Mount Timer 12-240VAC/DC Multi Function Timer Function Chart MODULAR DEVICES 93 Web: www.switchtec.com email: [email protected]

MODULAR DEVICES MODULAR DEVICES Time Switches SDT Series Digital Time Switches • Daily/Weekly digital time switch • 230VAC • 35mm width DIN rail mountable • Automatic summer(BST)/winter(GMT) conversion • Memory battery backup • 88 Program locations (44 on - 44 off) • UKCA & CE Approved • Single or Double Channel (Independent programs) • 16 Amp contact • SDT-EDW-230 Minimum program time 1 minute • SDT-2DW-230 Minimum program time 1 second, ideal for School bell applications Part Number Voltage Description 230VAC Basic Single Channel Daily or Weekly Programmable Time Switch 230VAC SDT-EDW-230 230VAC Double Channel Daily or Weekly Programmable Time Switch 230VAC SDT-2DW-230 STS Series Digital Time Switches • Daily/Weekly digital time switch • 230VAC & 12-240VAC/DC versions • 35mm width DIN rail mountable • Automatic summer(BST)/winter(GMT) conversion • Memory battery backup • 100 Program locations (50 on - 50 off) • UKCA & CE Approved • Single or double channel (Independent programs) • 16 Amp contact • Minimum program time 1 second, ideal for School bell applications Part Number Voltage Description STS-DW 12-240VAC/DC Single Channel Daily or Weekly Programmable Time Switch 12-240VAC/DC STS-DW-230 230VAC Single Channel Daily or Weekly Programmable Time Switch 230VAC STS-2DW 230VAC Double Channel Daily or Weekly Programmable Time Switch 230VAC Datasheets & programming information available at www.switchtec.com Alarm Bells? see page 142 MODULAR DEVICES 94 Telephone: 01785 818600 Fax: 01785 811900

MODULAR DEVICES Monitoring Relays MODULAR DEVICES Current Monitoring Relay • Current monitoring relay • Multi voltage, 24-240VAC & 24VDC • 17.5mm width • Built in power up delay and tripping delay • Time range 0.5 second to 10 seconds • DIN rail mountable • Power and output LED • UKCA & CE Approved • Single pole 16 Amp contact rating Part Number Description SCR-0.5A 0.05-0.5 Amp DIN Rail Mount Current Monitoring Relay 24-240VAC/24VDC SCR-1A 0.1-1 Amp DIN Rail Mount Current Monitoring Relay 24-240VAC/24VDC SCR-2A 0.2.5 Amp DIN Rail Mount Current Monitoring Relay 24-240VAC/24VDC SCR-5A 0.5-5 Amp DIN Rail Mount Current Monitoring Relay 24-240VAC/24VDC SCR-8A 0.8-8 Amp DIN Rail Mount Current Monitoring Relay 24-240VAC/24VDC SCR-16A 1.6-16 Amp DIN Rail Mount Current Monitoring Relay 24-240VAC/24VDC Phase Sequence & Phase Failure Monitoring Relay • Phase sequence & phase failure monitoring relay • 17.5mm width • DIN rail mountable • Power and Output LED • UKCA & CE Approved • Single pole 10 Amp contact rating Part Number Description 3 Phase Sequence & Phase Failure Monitoring Relay SPR-415 3 Phase & Neutral Sequence & Phase Failure Monitoring Relay SPR-415N Phase Under & Over Voltage Monitoring Relay • Phase under & over voltage monitoring relay • Selectable voltages • Time range 0.1 second to 10 seconds • 17.5mm width • DIN rail mountable • Power and output LED • UKCA & CE Approved • Single pole 10 Amp contact rating Part Number Description Single Phase Under & Over Voltage Monitoring Relay SVR-1N-02 3 Phase Under & Over Voltage Monitoring Relay SVR-3 3 Phase & Neutral Under & Over Voltage Monitoring Relay SVR-3N MODULAR DEVICES Web: www.switchtec.com email: [email protected] 95

MODULAR DEVICES MODULAR DEVICES Modular Latching Relays & Bell Transformer Modular Electrical Latching Relay • 2 Pole 16 Amp latching relay • Electrically latching (Requires power at all times) • Multi voltage, 12-240VAC/DC • 17.5mm width • Power and output LED • UKCA & CE Approved • Positional memory in the event of power failure (Keeps position in memory when supply lost and when power restored returns to original position) Part Number Description SLR-2 2 Pole 16 Amp Modular Electrical Latching Relay 12-240VAC/DC Modular Mechanical Impulse Latching Relay • 2 Pole 16 Amp latching relay • Mechanically (Impulse) latching • Continuously rated coil • Manual mechanical override button • 17.5mm width • DIN rail mount • UKCA & CE Approved Part Number Description SCLR2-12VDC 2 Pole 16 Amp Modular Mechanical Latching Relay 12VDC SCLR2-24VDC 2 Pole 16 Amp Modular Mechanical Latching Relay 24VDC SCLR2-24VAC 2 Pole 16 Amp Modular Mechanical Latching Relay 24VAC SCLR2-110VAC 2 Pole 16 Amp Modular Mechanical Latching Relay 110VAC SCLR2-230VAC 2 Pole 16 Amp Modular Mechanical Latching Relay 230VAC Other Voltages available DIN Rail mount Bell Transformer • DIN rail mount • 8VA • IP20 Touch proof terminals • 230VAC input • 8, 12 or 24VAC output • UKCA & CE Approved Part Number Description STS-BT DIN Rail mount Bell Transformer 8VA 8-12-24VAC Output 230VAC Input 96 MODULAR DEVICES Telephone: 01785 818600 Fax: 01785 811900

MODULAR DEVICES Modular Contactors & DIN 3 Pin Socket MODULAR DEVICES 2 & 4 Pole Modular Contactors SMC-2520-240 • Available in 2 or 4 pole • Normally open & normally closed versions 2 Pole • 25, 40, 63 & 100 Amp AC1 & AC7a • 35mm DIN rail mount Part Number • IP20 Touch proof terminals • UKCA & CE Approved SMC-2520-240 • 240VAC Coil SMC-2502-240 SMC-4020-240 Other Voltages and contact configurations available SMC-6320-240 SMC-10020-240 Dimensions (HxWxD) Description 81 x 18 x 68mm 25 Amp 2 Pole DIN Mount Modular Contactor 2 x NO 240VAC 81 x 18 x 68mm 25 Amp 2 Pole DIN Mount Modular Contactor 2 x NC 240VAC 85 x 36 x 68mm 40 Amp 2 Pole DIN Mount Modular Contactor 2 x NO 240VAC 85 x 36 x 68mm 63 Amp 2 Pole DIN Mount Modular Contactor 2 x NO 240VAC 85 x 54 x 68mm 100 Amp 2 Pole DIN Mount Modular Contactor 2 x NO 240VAC 4 Pole Dimensions (HxWxD) Description Part Number 81 x 36 x 68mm 25 Amp 4 Pole DIN Mount Modular Contactor 2 x NO 240VAC 81 x 18 x 68mm 25 Amp 4 Pole DIN Mount Modular Contactor 2 x NC 240VAC SMC-2540-240 85 x 54 x 68mm 40 Amp 4 Pole DIN Mount Modular Contactor 2 x NO 240VAC SMC-2504-240 85 x 54 x 68mm 63 Amp 4 Pole DIN Mount Modular Contactor 2 x NO 240VAC SMC-4040-240 85 x 108 x 68mm 100 Amp 4 Pole DIN Mount Modular Contactor 2 x NO 240VAC SMC-6340-240 SMC-10040-240 SMC-2540-240 SMC-6320-240 SMC-1004-240 DIN Rail mountable UK 3 Pin Socket • DIN rail mount • UK 3 Pin • 16 Amp • 250VAC • IP20 Touch proof • Dimensions 53 x 82 x 60mm Part Number Description MARL1412-UK DIN Rail Mountable UK 3 Pin Socket 16 Amp 240VAC MODULAR DEVICES 97 Web: www.switchtec.com email: [email protected]

MODULAR DEVICES MODULAR DEVICES Industrial Ethernet Switches OPAL Series Unmanaged Industrial Ethernet Switches • 5, 8 & 16 Port RJ45 fast Ethernet switches • Unmanaged (plug & play) • AC/DC Voltages 18-30VAC/12-48VDC • Dual/redundant power inputs • -10oC to +60oC Operating temperature • Rugged Aluminium IP30 DIN rail mount housing • Dual LED power supply indication • Full LED Link/ACT indication • Selectable storm protection via DIP switch • 5 Year warranty • cULus, ATEX (EX), UKCA & CE Approved Part Number Description OPAL5-E-5T-LV-LV 5 Port RJ45 Unmanaged Industrial Ethernet Switch 18-30VAC/12-48VDC OPAL8-E-8T-LV-LV 8 Port RJ45 Unmanaged Industrial Ethernet Switch 18-30VAC/12-48VDC OPAL20-E-16T-LV-LV 16 Port RJ45 Unmanaged Industrial Ethernet Switch 18-30VAC/12-48VDC OPAL5-E-5T-LV-LV OPAL8-E-8T-LV-LV OPAL20-E-16T-LV-LV Part Number OPAL 5 OPAL 8 OPAL 20 Number of RJ45 Ports Supply Voltage OPAL5-E-5T-LV-LV OPAL8-E-8T-LV-LV OPAL20-E-16T-LV-LV Standards 5 8 16 MAC Table 18-30VAC / 12-48VDC Packet Buffer Packet Forward Rate IEEE 802.3i (10Base-T) Switching Delay Protection IEEE 802.3u (100Base-TX & 100Base-FX) Standards Approvals IEEE 802.3ab (1000Base-T)(Opal 20) Dimensions 2K 2K 8K 1Mbit 1Mbit 2Mbit 0.75Mpps 1.2Mpps 5.7Mpps <10uS Overload, Reverse Polarity & Redundancy EMI: FCC CFR47 Part 15, EN55022/CISPR22 Class A EMS: IEC61000-4-2/3/4/5/6 IEC60068-2-6/27/32 UL61010 Class I Div 2, Atex Zone 2, IECEx, CE, FCC 115 x 30 x 68mm 115 x 46 x 68mm 134 x 79.5 x 106mm MJ8 RJ45 Surge Protection see page 108 MODULAR DEVICES 98 Telephone: 01785 818600 Fax: 01785 811900