HELLA_AUS_CAT_2019_20_v0219

ACCESSORIES PUSH SWITCHES Max 5 23 Momentary Spring Return Push Button Switch Off-(On) o28 Water resistant push button type switch with 18 5 rubber cap. Off-momentary on push button 44 (spring return). 4503 6JF 001 571-003 h OFF-(ON) Mounting 22.5mm diameter opening. For Panels Up to 2mm thick. Maximum Load 16A @ 12V DC 8A @ 24V DC Do not remove rubber cap/front face nut when fitting. 28 16 63 27 Momentary Spring Return Push 6 Button Switch Off-(On) OFF-(ON) Water resistant starter switch. Off-momentary on push button (spring return). 4506 6JB 905 371-001 Mounting 16mm diameter opening. For Panels Up to 10mm thick. Maximum Load 60A @ 12V DC 40A @ 24V DC ACCESSORIES [email protected]   hella.com.au  349

PUSH/PULL SWITCHES Headlamp Switch Off-On-On 23 15 45 30 ACCESSORIES h OFF-ON-ON Three position headlamp switch without 24 10 30 pilot lamp. Features black grip and 20 amp glass fuse. 4055 6RD 905 343-001 Mounting 11mm diameter opening. For Panels Up to 10mm thick. Maximum Load 10A @ 12V DC 5A @ 24V DC Long Reach Switch Off-On 57 21 01 12 30 Two position long reach switch. 8 4400 6ED 001 563-005 h OFF-ON Mounting 9mm diameter opening. For Panels Up to 12mm thick. Maximum Load 10A @ 12V DC 5A @ 24V DC Short Reach Switch Off-On 47 21 01 7 30 Two position short reach switch. 8 14 4403 6ED 001 563-012 h OFF-ON Mounting 9mm diameter opening. For Panels Up to 2mm thick. Maximum Load 10A @ 12V DC 5A @ 24V DC ACCESSORIES Illuminated Switches Off-On M14 X 1 22 31 K 23 13 27 Knob incorporates red or green pilot lamp. 28 34 1 0 0.5-3 15 63 4411 6ED 004 778-023 h ■ GREEN 4412 Mounting 6ED 004 778-013 h ■ RED For Panels Maximum Load 14mm diameter opening. Globes to Suit Up to 6mm thick. 10A @ 12V DC 5A @ 24V DC 12V DC W121.2  Globe to be ordered separately. 24V DC W241.2  Globe to be ordered separately.  350 hella.com.au   [email protected]

FLASHER HAZARD WARNING SWITCHES ACCESSORIES 101 54 Hazard Warning Switches 49s 46 Operates all the flasher lamps of a 12V DC or 43 24V DC vehicle (and trailer) simultaneously. 0 1 22 h 12V DC Red knob with pilot lamp. Complete with cables, h 24V DC terminals and wiring instructions for easy 30 15 R L 54f installation. 5225 6HD 002 535-032 5226 Mounting 6HD 002 535-112 Voltage For Panels 12mm diameter opening. Globes to Suit 12V DC (Globe included) Note 24V DC (Globe included) Up to 7mm thick. 12V DC W121.2 24V DC W243 Not suitable for extended periods of continuous use 49 31 17 49 55 Hazard Warning Switch 57 01 32 For cars, trucks, buses with and without 18 OFF-ON trailers. Black plastic mounting panel. Red knob with pilot lamp. Includes 8 pole multiple 15 30 49a L R adaptor. Push-on 6mm terminals supplied. Wiring diagram and instructions are included. 5227 6HF 001 579-051 Mounting Maximum Load 29mm diameter opening. For Panels Globes to Suit 7A @12V DC Up to 3mm thick. 12V DC J122  Globe to be ordered separately. 24V DC J243  Globe to be ordered separately. ACCESSORIES [email protected]   hella.com.au  351

BATTERY SWITCHES Heavy Battery Master Switch 135 73 ACCESSORIES h OFF-1-2-BOTH Enables switching between battery 1 and 2 or 135 linking up of both batteries for extra power. May also be used as a manual isolator for charging batteries. 76 6EK 005 519-002 175A @12V DC Continuous 2765 87.5A @ 24V DC Continuous Maximum Load 4-posiiton switch (off-1-2-both) Function Dual Battery Master Switch - 153 67 Weatherproof 140 For 6-36V DC battery systems with alternators or generators. Water and vapour resistant. 70 6EB 950 870-001 OFF-1-2-BOTH 2767 Surface mount. or 84mm diameter opening Mounting Maximum Load 5 00A at 12V DC for 10 seconds 250A at 24V DC for 10 seconds Function 310A at 12V DC continuous For Panels 155A at 24V DC continuous 4-posiiton switch (off-1-2-both) Up to 25mm thick. Battery Master Switch 68 76 68 48 Suitable for cars and medium sized trucks. Complete with removable key. ACCESSORIES 4640 9SL 998 540-002 h OFF-ON Mounting Maximum Load Recess or surface mount. Maximum Continuous Load 12/24V DC 1250A for up to 10 seconds Termination Protection 12/24V DC 275A Spare Part 2 x 10mm studs. Spare key IP 56 4641  352 hella.com.au   [email protected]

ACCESSORIES BATTERY SWITCHES 66 40 57 Battery Master Switch 22 Suitable for cars and medium sized trucks. 10 Complete with removable key. For interrupting circuits (prevents theft and short circuit). 4650 6EK 002 843-057 h OFF-ON Mounting 24mm diameter opening Maximum Load 12V DC 1000A for up to 10 seconds. 24V DC 500A for up to 10 seconds. Maximum 12/24V - 50A at a maximum ambient temperature of 80°C with 35mm2 lead, Continuous Load connected with ring-type terminals. Termination 2 x 10mm studs. Protection IP X4 (Protection against water splashing) Spare Part 4652 Spare key Switch not designed for Marine applications. 109 120 Heavy Duty Battery Master Switch 100 For trucks, buses and earth moving 22 10 58 equipment. Complete with removable key. 75 62 10 4653 6EK 001 559-002 h OFF-ON Mounting 22mm diameter opening. Maximum Load 12V DC 5000A for 10 seconds. 24V DC 2500A for 10 seconds Maximum 12/24V DC 100A continuous at a maximum ambient temperature of Continuous Load 60°C with 50mm2 lead connected with ring-type terminals. Termination 2 x 10mm studs. Protection IP X4 (Protection against water splashing) Spare Part 4654 Spare key Switch not designed for Marine applications. ACCESSORIES [email protected]   hella.com.au  353

BATTERY MASTER SWITCHES ACCESSORIES Battery Master Switch 24 68 Battery master switch with threaded collar. 48 111 54 Suitable for cars and medium sized trucks. 48 Complete with removable key, labelled handle 4722 and removable back cover. For interrupting Mounting 54 circuits (prevents theft and short circuit). Maximum Load Maximum Continuous Load 9SL 980 833-001 h OFF-ON Termination Protection Recess or surface mount. 25mm diameter opening. 12/24V DC 1250A for up to 10 seconds. 12/24V DC 275A 2 x 10mm studs. IP 56 (Protection against solid foreign objects up to 1mm and powerful water jets) Remote Operated Battery 68 100 Master Switch 68 76 45 Battery switch with tin-plated copper studs and nuts. Can be operated manually or remotely 53 with a separate switch (not supplied). Suitable for mounting alongside battery reducing 4724 6EN 980 835-001 h OFF-ON cable lengths to starter motor. Complete with Mounting removable key and 3 way DTM plug. Voltage Recess or surface mount. 55mm diameter opening. Power Consumption Maximum Load 12/24V DC Maximum Continuous Load 2W @ 12V DC when operating, 0.25W static. Termination Cable Length 12/24V DC 1250A for up to 10 seconds. 12/24V DC 275A 2 x 10mm studs. 500mm ACCESSORIES 102 62 90 51 Heavy Duty Battery Master Switch 102 ON 85 For commercial use. Features sliding contact for self cleaning. OFF 89 4720 6EK 998 540-062 h OFF-ON Mounting Maximum Load Recess or surface mount. 85mm diameter opening. Maximum Continuous Load 12/24V DC 2500A for up to 10 seconds. Termination Protection 12/24V DC 600A 2 x 12mm studs. IP 56 (Protection against solid foreign objects up to 1mm and powerful water jets)  354 hella.com.au   [email protected]

ACCESSORIES BATTERY MASTER SWITCHES 67 Battery Master Switches 4642 6EK 905 424-001 109 4643 6EK 905 424-011 Mounting 19mm diameter opening. Double-pole, 2-position (off-on) Battery Master Maximum Load 1000A at 6-36V DC intermittent Switch with plated steel case designed to Maximum 125A at 6-36V DC continuous (large studs) 70 disconnect both battery and field circuit. Actuated Continuous Load 20A continuous (small studs) by chrome-plated die-cast lever. Part No. 4643 For Panels Up to 4.75mm thick. features silver laminated contacts. Spare Part 4645 Key 1 ■ SILVER CONTACTS 4646 Face Plate 2 Accessories 1 P/N 4645 2 P/N 4646 69.1 10 Battery Master Lockout Switches - 2 Pole 11.4 60.3 135.6 Heavy-duty 2-pole lockable battery lock out switch. The Battery lockout switch provides a HM7592B 9MK 910 109-001 ■ RED HANDLE reliable power disconnection and safety cut-off HM7592Y that protects the vehicle against tampering, Mounting 9MK 910 109-011 ■ YELLOW HANDLE theft and battery drain. It also protects service personnel from electrical hazards during service Operating Temp. operations. Maximum Continuous Load Sealed design allows switch to be mounted in the best location regardless of Protection environment. -40°C to +85°C 300A at 12V DC continuous 250A at 24V DC continuous Waterproof and dustproof to IP67. ACCESSORIES [email protected]   hella.com.au  355

BATTERY MASTER SWITCHES ACCESSORIES Battery Master Lockout Switch ON 65 - 4 Pole 45° OFF Heavy-duty 4-pole lockable battery lock out switch. The Battery lockout switch provides a 66.5 35 reliable power disconnection and safety cut-off 66.5 that protects the vehicle against tampering, theft and battery drain. It also protects service HM7591S 9MK 910 109-201 personnel from electrical hazards during service Mounting 19mm diameter opening. operations. Isolates of both positive and negative Operating Temp. -40°C to +29°C sides from the battery, or isolation of 2 circuits Maximum Load 125A at 6-36V DC continuous with only one switch. Protection Waterproof and dustproof to IP67. Battery Master Switch - Silver 67 112 Contacts - Weatherproof 70 Weatherproof double-pole, 2-position (off-on) 4644 6EK 905 424-021 ■ SILVER CONTACTS Battery Master Switch featuring plated steel Mounting 19mm diameter opening. case, silver laminated contacts and O-ring seal Maximum Load 1000A at 6-36V DC intermittent to protect from dirt and moisture. Also features Maximum 125A at 6-36V DC continuous (large studs) index pin to align unit and prevent rotation. Continuous Load 20A continuous (small studs) For Panels Up to 6.75mm thick. Spare Part 4645 Key 1 4646 Face Plate 2 Accessories ACCESSORIES 1 P/N 4645 2 P/N 4646  356 hella.com.au   [email protected]

ACCESSORIES 120 10 64 120 BATTERY MASTER SWITCHES 22 100 4655 75 Heavy Duty Battery Master Switch Mounting Maximum Load 64 10 Extremely robust, single-pole (2 post) Battery Maximum Master Switch featuring double-cut copper Continuous Load 6EK 905 397-001 contacts. Supplied complete with removable Protection 2 4mm diameter opening. handle, security chain and PVC protective cover. Spare Parts 2 500A at 12-24V DC for 5 seconds Suitable for industrial vehicles and agricultural machinery. 250A at 12-24V DC continuous IP 66 4655COV Strap & PVC Protective Cover 1 4655KEY Handle, Chain & Protective Cover 2 1 4655COV 2 4655KEY 133 108.5 29 Heavy Duty Battery Master Switch 110 10 4 Terminals Extremely robust, double-pole (4 post) Battery Master Switch featuring corrosion-resistant zinc- 21 92 plated housing and double-cut copper contacts. Suitable for industrial and agricultural vehicles. 13 42 43 ø 8mm 4657 6EK 905 249-001 Mounting 8 2mm x 77mm opening Mounting hole diameter 8mm Maximum Load 2500A at 12-24V DC for 5 seconds Maximum Continuous Load 250A at 12-24V DC continuous Termination 2 x 12mm studs. Protection IP 65 133 108.5 29 Heavy Duty Battery Master Switch ACCESSORIES 110 10 - Weatherproof 4 Terminals Extremely robust, double-pole (4 post) Battery 21 92 Master Switch with corrosion-resistant zinc- plated housing and double-cut copper contacts. 2 4 43 ø 8mm Specifically designed for marine applications 43 featuring additional white surface protection coating for extended durability. 2769 6EK 905 250-001 Mounting 8 2mm x 77mm opening Mounting hole diameter 8mm Maximum Load 2 500A at 12-24V DC for 5 seconds Maximum Continuous Load 250A at 12-24V DC continuous Termination 2 x 12mm studs. Protection IP 65 [email protected]   hella.com.au  357

BATTERY SELECTOR SWITCHES ACCESSORIES Battery Selector Switch 68 76 68 48 Battery Switch to select either from two power sources or combine together. Will also isolate from the power sources. 4723 9SL 980 834-001 OFF-B1-BOTH-B2 Mounting Maximum Load Recess or Surface Mount. Maximum Continuous Load 12/24V DC 1000A for up to 10 seconds. Termination Protection 12/24V DC 200A 3 x 5/16\" studs. IP 56 (Protection against solid foreign objects up to 1mm and powerful water jets) Battery Selector Switch 102 62 90 51 Battery Switch to select either from two power sources or combine together. Will also isolate 102 ON 85 from the power sources. OFF 89 4721 6EB 998 540-202 OFF-B1-BOTH-B2 Mounting Recess or Surface Mount. 85mm diameter opening. Maximum Load 12/24V DC 1500A for 10 seconds Maximum 12/24V DC 350A Continuous Load Termination 3 x 10mm studs. Protection IP 56 (Protection against solid foreign objects up to 1mm and powerful water jets) Switch can be locked using 6mm diameter padlock with 75mm reach. ACCESSORIES  358 hella.com.au   [email protected]

IGNITION AND STARTER SWITCHES ACCESSORIES Max 3.5 55 15/54 19 Diesel Pre-heating Starter Switch 50a 15/54 = Ignition Pre-heating Starter Switch supplied with 17 = Start two keys. Key removes in park and off. 17 30 19 19 = Preheat 5815/5427 58 = Park/Side Lamp 50a = Starter Control 11 67 30 = + Input 58 30 50a 17 4005 6JB 003 959-002 h Mounting 26.5mm diameter opening. For Panels Up to 3.5mm thick. Function 5 position switch (park, off, driving, pre-heat, start). TERMINAL POSITION FUNCTION CURRENT @ 24V 30-58 P Park Lamps 4A 30-15/54 1 Driving 18A 30-19 2 Preheat 35A 30-50a/17 3 Start 5A/35A 1 0 2 3 R/GA ST Ignition and Starter Switch BAT/30 15 50 Switch with spring loaded return. 7 16 19 12 32 54/R/GA 15 = Ignition Supplied with two keys. 15 ST/50 = Start R/GA = Accessories ST50 BAT/30 = + Input 25 19 BAT30 6JB 950 505-001 h 4008 19mm diameter opening. ACCESSORIES Mounting Up to 19mm thick. For Panels @12V ignition 25A, start 12A, accessory 15A. Maximum Load Blank key number Silica BH4. Spare Part Four position switch (accessory, off, ignition, start). Function 71 33 Heavy Duty Ignition and Starter Switch 43 15a15 P 50 30 Heavy Duty Ignition and Starter Switch, featuring plastic outer construction for 10 maximum protection against damage. Supplied with two keys. 4008HD 4008HD Mounting 6JK 905 339-001 h For Panels Maximum Load 19mm diameter opening. Function Up to 10mm thick. @12V park 2A, ignition 20A, start 25A., accessory 30A Four position switch (park, off, ignition, start). Key removes in park and off. [email protected]   hella.com.au  359

IGNITION AND STARTER SWITCHES Ignition and Starter Switches 75 15 50 0-10 31 ACCESSORIES ACC IGN START M22 x 1 Two keys supplied. Start-lockout mechanism to 30 50 22MM SHAFT prevent accidental engagement of starter. 75 15 30 = + Input 8 18MM SHAFT 15 = Ignition 66 50 = Start 75 = Acces 30 4009 6JK 950 838-001 4010 Mounting 6JK 905 340-001 For Panels 4009 22.5mm diameter opening Maximum Load 4010 18.5mm diameter opening Function Up to 19mm thick. @12V ignition 25A, start 50A, accessory 20A. Four position switch (accessory, off, ignition, start). Ignition and Starter Switch ACC OFF IGN START 80 44 BAT. = To battery 22 44 Switch with spring-loaded return. 4 screw AI ACC. = To accessories 29 20 terminals and satin finish. SB IGN. = To ignition Corrosion-resistant brass construction. SOL = To starter solenoid switch and ballast resistor by-pass. (if ballast resistor is fitted) BAT 2760 6JB 905 308-001 h Mounting 21mm diameter opening. For Panels Up to 30mm thick. Maximum Load @12V ignition 10A, start 5A, accessory 10A. Function Four position switch (accessory, off, ignition and start) Ignition and Starter Switch ACC IGN START Four position switch with spring loaded return. BAT. = To battery 87 36 Four screw terminals. ACC. = To accessories 28 36 IGN. = To ignition 20 BAT OFF ST. = To starter solenoid switch BAT ACC ST 29 IGN ACCESSORIES 2766 6JB 905 313-001 h Mounting 21mm diameter opening. For Panels Up to 25mm thick. Maximum Load @12V ignition 10A, start 5A, accessory 10A. Function Four position switch (accessory, off, ignition and start)  360 hella.com.au   [email protected]

ACCESSORIES STOP LAMP SWITCHES 30 100 32 Stop Lamp Switch Off-On 7 13 8 Normally open, contacts are closed when 8 16 tension is applied to the spring. Complete 24 with splash proof rubber cap. Brake linkage clamp 6mm diameter. h OFF-ON 4560 6DD 905 374-001 Maximum Load 10A @ 12V DC 5A @ 24V DC 80 22 Stop Lamp Switch On-Off 35 30 15 10 Thread M10 x 1.25. Suits most Japanese vehicles. 4562 6DF 007 365-001 h ON-OFF Maximum Load 10A @ 12V DC 1/8”- 27 42.9 9.7 Stop Lamp Switch Hydraulic NPTF 10 4 25 1/8” x 27 NPT Thread. 11.4 12 4566 6DL 905 375-011 h HYDRAULIC Maximum Load 9A @ 12V DC Replaces 4.5A @ 24V DC Suits Actuating Pressure Original No. 1997725, No. LC6870, No. P7715 Note G MH, Ford, Chrysler, and Dodge 3.7-8.2 Bar O nly suitable for use with brake fluid (not silicone based). 9 23 22 Stop Lamp Switch Hydraulic ACCESSORIES M10 x 1 9 M 10 x 1 Thread. 11 4567 6DL 905 375-021 h HYDRAULIC Maximum Load 9A @ 12V DC Replaces 4.5A @ 24V DC Suits O riginal No. 113 945 515C Actuating Pressure V olkswagen to 1970 Note 3-6 Bar O nly suitable for use with brake fluid (not silicone based). [email protected]   hella.com.au  361

STOP LAMP SWITCHES 59 22 ACCESSORIES h MECHANICAL Stop Lamp Switch Mechanical M 12 x 1 Thread, Plunger length 7.5mm 7.5 12 M12 x 1 9 13 16.5 4568 6DL 905 375-031 Maximum Load 4 0A @ 12V for 60 seconds 20A @ 24V for 60 seconds 10.5A @ 12V continuous 5.25A @ 24V continuous Stop Lamp Switch Mechanical 58.5 9 22 20 12.5 12 M 12 x 1 Thread, Plunger length 20mm M12 x 1 4569 6EZ 905 376-001 h MECHANICAL Maximum Load 5A @ 12V DC Replaces 2.5A @ 24V DC To Suit P art No. 7419748 Ford Capri 1969-73, Escort 1970-81, Jeep C17 and Holden HR. Stop Lamp Switch Mechanical 51 9 22 13 12.5 12 M 12 x 1 Thread. M12 x 1 4570 6EZ 905 376-021 h MECHANICAL Maximum Load 5A @ 12V DC Replaces 2.5A @ 24V DC O riginal No. 7438915 ACCESSORIES  362 hella.com.au   [email protected]

DOOR CONTACT SWITCHES ACCESSORIES 11 40 Door Contact Switch On-Off 30 20 24 Switch closes circuit if door is opened. 30 4550 6ZF 003 549-003 Mounting 21mm diameter opening. h ON-OFF Maximum Load 2A @ 12V DC 1A @ 24V DC 11 40 Door Contact Switch Off-On 20 24 Switch opens circuit if door is opened. 30 30 May be used as safety cut-off switch. 4551 6ZF 003 549-022 h OFF-ON Mounting 21mm diameter opening. Maximum Load 2A @ 12V DC 1A @ 24V DC 53 18 Door Contact Switch On-Off 9 36 Switch closes circuit if door is opened. Corrosion proof black plastic. Rubber seal. Push-on terminal. 4553 6ZF 905 373-001 h ON-OFF Mounting 12mm diameter opening and screw. Maximum Load 3.5A @ 12V DC Plunger automatically adjusts to door gap on initial operation. ACCESSORIES [email protected]   hella.com.au  363

OIL PRESSURE SWITCHES ACCESSORIES Oil Pressure Switch 53 6.3 1/8” x 28 BSP Thread 16.5 PT 1/8 (JIS)10 27 10.5 4571 6ZL 905 376-031 h Actuating Pressure 0.14 - 0.48 Bar Oil Pressure Switch 51 22 13 12.5 1/4” x 18 NPTF Thread M12 x 1 9 12 4574 6ZL 905 376-041 h Actuating Pressure 0.14 - 0.48 Bar ACCESSORIES  364 hella.com.au   [email protected]

ACCESSORIES PILOT LAMPS 31 9 16 Pilot Lamps 12 Volt Panel push fit Pilot Lamp with non-replaceable globe. 13 2708 2AA 905 300-001 h ■ RED h ■ GREEN 2709 2AA 905 300-011 h ■ BLUE h ■ AMBER 2710 2AA 905 300-021 2711 2AA 905 300-031 Mounting 12.5mm diameter opening. Voltage 12V DC Suitable for 12V DC only. Globe not replaceable. P/N 2709 P/N 2710 P/N 2711 10 36 25 Pilot Lamps 12 Volt 17 Pilot Lamp utilising bayonet based globe for use under heavy duty conditions. 2712 2AA 905 301-001 h ■ RED 2713 h ■ GREEN 2714 2AA 905 301-011 h ■ BLUE 2715 h ■ AMBER Mounting 2AA 905 301-021 Globes to Suit 2AA 905 301-031 2716 2716-24V 17mm diameter opening. 2717 2717-24V 12V DC H122 (included) P/N 2713 P/N 2714 P/N 2715 2718 24V DC H242 2718-24V 2719 52 30 LED Pilot Lamps 12/24V AC/DC 2719-24V 22 2720 Heavy duty multi-chip LED Pilot Lamp featuring 2720-24V 14 38 shock-resistant one-piece construction for long Mounting service life and polycarbonate lens. For Panels 2AA 910 233-041 – 12V AC/DC Voltage 2AA 910 233-101 – 24V AC/DC ■ RED ACCESSORIES Protection 2AA 910 233-031 – 12V AC/DC ■ GREEN 2AA 910 233-091 – 24V AC/DC ■ AMBER P/N 2717 P/N 2718 2AA 910 233-011 – 12V AC/DC ■ WHITE 2AA 910 233-061 – 24V AC/DC ■ BLUE 2AA 910 233-051 – 12V AC/DC 2AA 910 233-111 – 24V AC/DC P/N 2719 P/N 2720 2AA 910 233-021 – 12V AC/DC 2AA 910 233-071 – 24V AC/DC 22mm diameter opening. Up to 38mm thick. 12V or 24V AC/DC IP 65 (Protection against dust and water jets) when installed. [email protected]   hella.com.au  365

7 POLE ROUND PLUGS AND SOCKETS ACCESSORIES WATER TIGHT SOCKETS 7P/12V WATERTIGHT SOCKET # DIN SIGNAL COLOUR WIRE AWG CROSS A trailer socket, traditionally, is an open interface between 1 L Left Turn Signal Yellow SECTION 15 a trailer and a vehicle’s electrical wiring system. The current 15 standard of AS4177.5 (Flat Socket) or ISO 1724 (Round Socket) 2 54g Reverse Lamps Black 1.5 13 do not provide water protection. In existing sockets, water 1.5 15 can enter into the vehicles electronic module through capillary 3 31 Ground White 2.5 15 action of the wires and can cause enormous damage. 1.5 15 4 R Right Turn Signal Green 1.5 15 This new 100% watertight 7 Pin/12V connector system sets 1.5 the new standard in this segment. 5 58R Electric Brakes Blue 1.5 The sophisticated, double contact system with primary and 6 54 Stop Lamps Red secondary locks, together with the individual wire seals make it impossible for moisture penetration to occur in the vehicle 7 58L Tail Lamps Brown board network. Front View Front View Even under the most extreme conditions, the system provides 100% water-tightness. The connector system satisfies all 1 1 requirement of original equipment manufacturers in the 26 62 automotive industry such as the protection IPX7 (Waterproof 7 up to 0.5m depth) and IPX9K (Protection against water 3 5 7 during high pressure, eg. Steam jet cleaning). In addition 24 3 1 543 to the water-tightness our new 7P/12V system has greatly 47 56 simplified the installation options (Plug & Play). 7 Pole Flat Socket 7 Pole Round Socket ACCESSORIES Features & Benefits: → Hidden Cover Door Spring → 100% water barrier from plug side to cable harness side, → No Terminal Screws → Easy Grip Cover Door Lugs for ease of opening even when a plug is connected → Protection Cover and Flexible Rubber Grommet → Made in Europe from Quality Materials → 100% water tightness from cable harness side through → Secondary Contact Lock (OE standards) ensures secure single wire seals wire fitment and reduces In-Service failure → New socket design with compatibility for all existing → Short Fitment Time - Quick Connect Mechanism mounting plates → Strain Relief prevents harness strain → Wire cross sectional area: 1.0 – 2.5 mm2 → Housing material: Reinforced composite → Watertight to IXP7 (waterproof up to 0.5m depth) and IPX9K (steam jet resistant) → Reinforced Mounting Lugs 366 hella.com.au   [email protected]

ACCESSORIES TRAILER PLUGS AND SOCKETS Water Tight 7P/12V Flat Socket (as 4177.5) Metal Strain relief Individual Watertight New Watertight AMP Flexible Large Wire Seals MCP2.8 Square Nickle Cable Bending NEW AMP MCP 2.8 Nickle Plated Crimped Contacts Plated Contacts Grommet with Primary Lock Barbs Discreet Door Spring Waterproof Contacts Holder with Secondary Terminal Lock Extended Door Reinforced Attachment Lugs Finger Grip Lugs Door Dust Seal Trailer Connector Wiring Specifications Cable Entry View (old AS2513) 5 POLE CONNECTOR WIRING SPECIFICATIONS 276 62 216 1 Terminal Number Connect to 35 7 7 62 2 Left-hand flasher lamps 3 Earth return 53 34 5 7 5 Right-hand flasher lamps 7 Pole Socket 543 6 Stop lamps 5 Pole Socket 5 Pole Plug 7 Pole Plug 7 Rear position, number plate and clearance lamps Front View (old AS41775-2004) 16 5 3 2 74 7 POLE CONNECTOR WIRING SPECIFICATIONS ACCESSORIES 7 Pole Flat Plug Terminal Number Connect to 4723561 1 Left-hand flasher lamps 7 Pole Flat Socket 2 Reversing lamps 3 Earth return 4 Right-hand flasher lamps 5 Service brakes (or Auxiliary) 6 Stop lamps 7 Rear position, number plate and clearance lamps Note If separate earth cable is not used on vehicle, earthing strip supplied should be fitted into Terminal No. 3 of socket and under mounting screw as shown. * Where service brakes are not fitted, Terminal No. 5 may be used for auxiliaries. Trailer Socket Bracket 8022 8HG 905 430-001 h Zinc plated steel. To suit P/Ns 4901 and 4912. [email protected]   hella.com.au 367

7 POLE ROUND PLUGS AND SOCKETS ACCESSORIES 7 Pole Metal Socket 4901 8JB 001 941-004 - Metal Housing h 4901BULK Rubber Boot 9GD 735 641-001 Description 8JB 001 941-005 - Metal Housing h PACK OF 25 Maximum Load 7 Pole Plastic Plug Accessory Metal housing with securing cap locks plug in position. 4902 20A @ 12V (total). Description 10A @ 24V (total). Maximum Load 9GD 735 641-001 Rubber boot 8JA 905 386-001 - Plastic Housing h Black Plastic Plug with strain relief. 20A @ 12V (total). 10A @ 24V (total). 7 Pole Plastic Plug 4909 8JB 001 939-003 - Plastic Housing Description Simply stores in boot until required. Maximum Load Requires no permanent bumper mounting. 20A @ 12V (total). 10A @ 24V (total). 7 Pole Metal Plug 4911 8JA 001 918-003 - Metal Housing h 4911BULK Description 8JA 001 918-004 - Metal Housing PACK OF 25 Maximum Load Metal housing. 20A @ 12V (total). 10A @ 24V (total). 7 Pole Plastic Socket 4912 8JB 001 943-091 - Plastic Housing h Maximum Load 20A @ 12V (total). 10A @ 24V (total). Accessory 9GD 735 641-001 Rubber boot ACCESSORIES Rubber Boot 9GD 735 641-001 Round IP Rated Socket 8JB 910 032-041 – Watertight (refer page 367) Comes with Door Seal & Seal for Multi Core cables. *Watertight (refer to page 367 for details). IP Rating IPX7 and IPX9K Crimp Terminals AMP Round connector (929975-1) Wire Size 1.0 – 2.5mm² Standard ISO 1724 Accessories 8PE 014 032-011 Crimping tool (refer page 407 for details) 368 hella.com.au   [email protected]

ACCESSORIES 7 POLE FLAT PLUGS AND SOCKETS 4920 7 Pole Base Socket Maximum Load 8JB 910 032-011 h sImprpinagct-loreasdiesdtalnidt., UV-stabilised plastic Nickel plated contacts 20A @ 12V (total) for excellent electrical performance. 10A @ 24V (total) Mates with all standard 7 pole connectors. 8JB 910 032-021 – Watertight (refer page 367) Flat IP Rated Socket Comes with Door Seal & Strain Relief. *Watertight (refer to page 367 for details). IP Rating IPX7 and IPX9K Crimp Terminals AMP MCP 2.8 (1-968857-1) Wire Size 1.5 - 2.5mm² Standard Meets AS 4177.5 Accessory 8PE 014 032-001 Crimping tool (refer page 407 for details) 7 Pole Flat Plug 4921 8JA 910 032-001 h NImicpkaecltp-rleasteisdtacnotn,tUacVt-ssftoarbielixsceedllpelnatsetilce.ctrical 4921-BULK Maximum Load 8JA 910 032-002 PACK OF 50 performance. Mates with all standard 7 and 20A @ 12V (total) 12 pole connectors. 10A @ 24V (total) 7 Pole Socket - Metal, Small ACCESSORIES 4930 8JB 905 391-011 h Dbriaescassctoinntraocbtsusfotrzisnucpaelrloioyr. High-conductivity Mounting current flow. Maximum Load Flush Mount 20A @ 12V (total) 10A @ 24V (total) [email protected]   hella.com.au 369

7 POLE FLAT PLUGS AND SOCKETS ACCESSORIES 7 Pole Plug - Metal, Small 4931 8JA 905 391-021 h Maximum Load 20A @ 12V (total) Diecast in robust zinc alloy. High-conductivity 10A @ 24V (total) brass contacts for superior current flow. 7 Pole Socket - Plastic, Small 4932 8JB 905 391-031 h Mounting Flush Mount Unique twist lock/electrical connection block. Maximum Load 20A @ 12V (total) Compact design. Made of impact and UV- 10A @ 24V (total) resistant thermoplastic. High-conductivity brass contacts for superior current flow. 7 Pole Plug - Plastic, Small 4933 8JA 905 391-041 h Maximum Load 20A @ 12V (total) Made of impact and UV-resistant thermoplastic. 10A @ 24V (total) High-conductivity brass contacts for superior current flow. 2 POLE PLUGS AND SOCKETS 2 Pole Socket - 200A 99 30 48 75 9 2 Pole Socket designed for applications with 81 high Current Draw requirements. Easy to install 12 and operates indpendently of lighting circuit. 4941 Maximum Load 8JB 905 394-011 ACCESSORIES 200A @ 12V SOCKET h PLUG 2 Pole Plug - 200A 72 110 43 2 Pole Plug designed for applications with high 76 38.5 Current Draw requirements. Easy to install and operates indpendently of lighting circuit. 4940 8JA 905 394-001 Maximum Load 200A @ 12V 370 hella.com.au   [email protected]

ACCESSORIES TRAILER PLUGS & SOCKETS 5 POLE CONNECTOR WIRING SPECIFICATIONS DIN ISO Connnector Wiring Specifications Terminal Number Connect to: Diecast in robust zinc alloy. High-conductivity brass contacts for superior current flow. AS4735 - 2003 (SAE + ISO) 1 (31) Common Earth Return 2 (58L) Left-hand Rear Position/Marker & Clearance Lamps Cable entry view 3 (L) Left-Hand Direction Indicators 1 1 26 62 4 (54) Stop Lamps 7 7 5 (R) Right-hand Direction Indicators 35 53 6 (58R) Right-hand Rear Position/Marker, Clearance and Licence Plate Lamps 4 4 7 Pole Socket 7 Pole Plug 7 (Centre) Reversing Lamps 4907 8JB 003 833-002 SOCKET 7 Pole Heavy Duty Plug and Socket 4908 8JA 003 831-002 PLUG Maximum Load 15A @ 24V with 1.5mm2 cable (total) 7 x 40A @ +12V Plug and Socket made from metal, with 20A @ 24V with 2.5mm2 cable (total) 7 x 20A @ +24V screw terminals (ISO 1185). Manufactured in Suitability 4907 suits 4908, 4934 & 4934NY accordance with AS4735-2003 4908 suits 4907, 4935 & 4935NY (ISO1185 & SAE J560B) P/N 4908 ACCESSORIES [email protected]   hella.com.au 371

HEAVY DUTY TRAILER CONNECTORS ACCESSORIES PLUG 7 Pole Heavy Duty SAE Plug - Metal 72 110 43 Heavy-duty 7 Pole Metal Plug manufactured 76 38.5 in accordance with AS 4735-2003 (ISO1185 & SAE J560B) standards. Features die-cast zinc 4934 8JA 905 392-001 housing, high-conductivity 100% brass floating Maximum Load 70A @ 12V pins held between sonic-welded inserts and Suits Part No’s 4907, 4935 and 4935NY spring cable guard for additional support and protection. Larger finger grips set back from the latched socket lid allow for safe and trouble-free disconnection. 7 Pole SAE Socket - Metal 99 75 30 100 Heavy-duty 7 Pole Metal Socket die-cast in robust zinc and manufactured in accordance with 81 9 AS 4375-2003 (ISO1185 & SAE J560B) standards. 12 Features include full opening lid for ease of plug insertion and extended front barrel housing for 4935 8JB 905 392-021 SOCKET added plug support. Raised internal ribs allow Mounting 58.9mm diameter opening for drainage of moisture to prevent corrosion Maximum Load 70A @ 12V and short circuits. Includes protective rubber Suits Part Nos 4934 and 4934NY boot, Part No. 4936. Spare Part 4936 Protective Rubber Boot 1 1 P/N 4936 ACCESSORIES 372 hella.com.au   [email protected]

ACCESSORIES HEAVY DUTY TRAILER CONNECTORS 4934NY 8JA 905 392-011 140 43 7 Pole SAE Plug - Nylon Maximum Load 70A @ 12V 75 38.5 Suits Part No’s 4907, 4935 and 4935NY Heavy-duty 7 Pole Plug manufactured in h PLUG accordance with AS 4735-2003 (ISO1185 & SAE J560B) standards. The ultra-durable nylon housing is of lightweight and resistant to degreasers, solvents and contact cleaners. Other features include high-conductivity 100% brass pins, exclusive cable guard and 360 degree compression clamp creating a rear moisture seal, whilst also preventing accidental cable pull out. 99 33 100 7 Pole SAE Socket - Nylon 75 9 81 Heavy-duty 7 Pole Socket made from composite glass-filled nylon and manufactured 12 in accordance with AS 4735-2003 (ISO1185 & SAE J560B) standards. The ultra-durable 4935NY 8JB 905 392-031 h SOCKET nylon housing is of lightweight and resistant Mounting 58.9mm diameter opening to petrochemicals, solvents and contact Maximum Load 70A @ 12V cleaners. Raised internal ribs allow for drainage Suits Part No’s 4934NY and 4934 of moisture to prevent corrosion and short Spare Part 4936 Protective Rubber Boot 1 circuits. Other features include full opening lid and extended front barrel housing for additional support and protection. Supplied complete with protective rubber boot, Part No. 4936. 1 P/N 4936 ACCESSORIES [email protected]   hella.com.au 373

HEAVY DUTY TRAILER CONNECTORS ACCESSORIES Suzi Coil with 7P 8KA 227 440-101 ISO 1724 Plugs Housing Maximum working • Cable outlet: PG Gland length • Outer Coil Diameter: 50mm Cable outlet Wire cross section area Silver coloured break-proof metal Tail ends 4.6m PG Gland 6 x 1.5 mm2 + 1 x 2.5 mm2 Tail 1: 220 mm, Tail 2: 220 mm Suzi Coil with 7P 8KA 227 440-111 - Long Tail ISO 1724 Plugs Long tail • Cable outlet: PG Gland • Outer Coil Diameter: 50mm Housing Silver coloured break-proof metal Maximum working 5.6m length Cable outlet PG Gland Wire cross section 6 x 1.5 mm2 + 1 x 2.5 mm2 area Tail ends Tail 1: 300 mm, Tail 2: 1300 mm Straight Cable with 7P 8KA 227 440-131 ISO 1724 Plugs Housing Cable length • Ideal for dog trailer Cable outlet Wire cross section ACCESSORIES area Break-proof silver coloured metal Housing plug with PVC cable 3m Maximum PG Gland 7 x 1.5 mm2 374 hella.com.au   [email protected]

ACCESSORIES HEAVY DUTY TRAILER CONNECTORS 8KA 227 440-141 Suzi Coil with 7P ISO 1724 and Housing SAEJ560 Pins • Outer Coil Diameter: 50mm Maximum working • Maximum working length 4.6m length Wire cross section ISO plug: Silver coloured break-proof metal area SAE plug: Reinforced composite plastic Tail ends 7 4.6m 6 x 1.5 mm2 + 1 x 2.5 mm2 Tail 1: 300 mm, Tail 2: 300 mm 8KA 227 440-151 - Long Tail Suzi Coil with 7P ISO 1724 and SAEJ560 • Outer Coil Diameter: 50mm • Maximum working length 5.6m Housing ISO plug: Silver coloured break-proof metal SAE plug: Reinforced composite plastic Pins 7 Maximum working 5.6m length Wire cross section 6 x 1.5 mm2 + 1 x 2.5 mm2 area Tail ends Tail 1: 300 mm, Tail 2: 1300 mm ACCESSORIES [email protected]   hella.com.au 375

HEAVY DUTY TRAILER CONNECTORS ACCESSORIES 7P Trailer Adaptor 13P to 7P 8JA 227 440-121 Current Mini Short Adaptor from vehicle 13P /12V to Housing trailer 7P/12V. Contact surface 16A Reinforced Plastic Nickel Suzi Coil with Heavy Duty 7P 8KA 905 392-041 Uni-molded connector body seals out water and corrosive chemicals SAEJ560 Plugs Housing Molded, bending protection Cable outlet 4 x 3 mm2 + 2 x 5 mm2 + 1 x 8 mm2 These 7 pin spiral cable-plug assemblies Wire cross are designed to provide a superior electrical section area 4m connection between the Prime mover and trailer. Max. working length 4.5m The uni-molded connector bodies are extremely Max. extension robust providing best in class performance and length are completely unique to the market. • High performance crimped contacts • Integrated strain relief provides permanent kink protection • Resistant to diesel fuel, engine coolant, engine oil, gear oil, water, salt, dirt, UV radiant and impact resistance ACCESSORIES 376 hella.com.au   [email protected]

ACCESSORIES HEAVY DUTY TRAILER CONNECTORS 7P ABS/EBS CONNECTORS ISO 7638 The ABS/EBS/ADR connectors are used on nearly every # DIN SIGNAL COLOUR WIRE AWG commercial vehicle with ABS/EBS System. The connectors CROSS 11 show safety features like automatic ejection of the plug, in 1 30 (+) 12V or 24V Red SECTION case of faulty wiring. To avoid confusion between 24V and 12V permanent for connectors, the systems feature different codings. 4 All ABS/EBS sockets and plugs are ADR (dangerous goods) compliant. control valves Features: 2 15 (+) 12V or 24V via Black 1.5 15 ignition lock for → System meets the high requirements of modern trailer electronics connectors according to ISO 4091 3 31 Ground for Yellow 1.5 15 → Prevention of faulty wiring due to ejector pin electronics (Pin 2) 4 11 → Easy and efficient assembly 4 31 Ground for Brown control valves → Systems specially designed for the application (Pin 1) → Screw contacts for in field repair 5 ABS Fault White 1.5 15 Indication 1.5 15 → Simplified cabling through colour markings 1.5 15 6 CAN H, for EBS Green/White → Ingress protection to IP54 and ABS → Easy and efficient assembly via screw terminal for 7 CAN L, for EBS Brown/White connectable conductor cross section 1.0 – 6.0 mm2. and ABS This connector is intended to be used for ABS and EBS on 12V Plug 24V Plug heavy duty trailers. 12V ISO 7638-2 connector is identified with Cable entry view Cable entry view a key between pin 3 and 4, while 24V ISO 7638-1 connector is identified with a key at pin 5. ISO 7638-2 ISO 7638-1 Multivolt Connector: ACCESSORIES Only to be used on Multivolt ABS/EBS systems. It is the responsibility of the user to ensure correct voltage compatibility and latch alignment. System created for 12V and 24V. We assume no liability for damage resulting from improper application. Multivolt suzi coil comes with warning flags as below: Warning Multivolt 12V/ 24V [email protected]   hella.com.au 377

HEAVY DUTY TRAILER CONNECTORS ACCESSORIES 7P/12V ABS/EBS Socket with 8JB 227 440-011 12V DC screw contacts Operating voltage 7 Pins Reinforced Composite • With cover, and rubber seals Housing 9 - 16mm • Made of reinforce composite For Cable Screw Contact • High strength cable gland of the cable outlet Contact Termination ISO7638-2 Standard 7P/12V ABS/EBS Plug with 8JA 227 440-031 12V DC screw contacts Operating voltage 7 Pins Reinforced Composite • With rubber seals Housing 9 - 16mm • Made of reinforce composite For Cable Screw Contact • Mechanical strain relief Contact Termination ISO7638-2 • Safe latching in place Standard ACCESSORIES Suzi Coil with 7P/12V ABS/EBS Plug 8KA 227 440-051 • Max 4.5m cable length with plug at both ends Operating voltage 12V DC • Outer cable dia: 50mm • Bending protection grommet Pins 7 Max. Working Length 4m Max. Extension 4.5m Length Standard ISO7638-2 378 hella.com.au   [email protected]

ACCESSORIES HEAVY DUTY TRAILER CONNECTORS 7P/24V ABS/EBS Socket with 8JB 227 440-021 24V DC screw contacts Operating voltage 7 Pins Reinforced Composite • With cover, and rubber seals Housing 9 - 16mm • Made of reinforce composite For Cable Screw Contact • High strength cable gland of the cable outlet Contact Termination ISO 7638-1 • Colour coding for easy installation Standard 7P/24V ABS/EBS Plug with 8JA 227440-041 24V DC screw contacts Operating voltage 7 Pins Reinforced Composite • With rubber seals Housing 9 - 16mm • Made of reinforce composite For Cable Screw Contact • Mechanical strain relief Contact Termination ISO 7638-1 • Safe latching in place Standard • Colour coding for easy installation 8KA 227440-061 Suzi Coil with 7P/24V ABS/EBS Plug Operating voltage 24V DC • Max 4.5m cable length with plug at both ends • Outer cable dia: 50mm • Bending protection grommet Pins 7 ACCESSORIES Max. Working Length 4m Max. Extension Length 4.5m Standard ISO 7638-1 [email protected]   hella.com.au 379

HEAVY DUTY TRAILER CONNECTORS ACCESSORIES Suzi Coil without Plug 8JA 227 440-071 5 x 1.5mm2 Wire cross section 2 x 4 mm2 • Working length: 4.5 meters area • Temperature range: -4O °C to 100 °C • Outer coil diameter: 50mm Suzi Coil with 7P / Multivolt Warning Power Supply ABS/EBS Plug Multivolt 12V/ 24V • Temperature range: -4O°C to 100°C • Outer Coil Diameter: 50mm 8KA 227 440-081 Operating voltage Pins Multivolt* Maximum working 7 length 8KA 227 440-081 4.5m Wire cross section area 5 x 1.5 mm2 + 2 x 4.0 mm2 Tail ends *Caution 8KA 227 440-081 Tail 1: 300 mm, Tail 2: 300 mm Operator must confirm voltage compatibility of prime mover and trailer. Suzi Coil with 7P / Multivolt Warning Power Supply ABS/EBS Plug Long Tail Multivolt 12V/ 24V • Temperature range: -4O°C to 100°C • Outer Coil Diameter: 50mm 8KA 227 440-181 - Long tail Operating voltage Multivolt* Pins 7 Maximum working 8KA 227 440-181 5.2m length ACCESSORIES Wire cross section 5 x 1.5 mm2 + 2 x 4.0 mm2 area Tail ends 8KA 227 440-181 Tail 1: 300 mm, Tail 2: 1000 mm *Caution Operator must confirm voltage compatibility of prime mover and trailer. 380 hella.com.au   [email protected]

ACCESSORIES HEAVY DUTY TRAILER CONNECTORS Power Supply Warning Multivolt 12V/ 24V 7P / Multivolt ABS/EBS Plug 8JA 227 440-091 Multivolt* • With cover and rubber seals Operating voltage 7 • Made of reinforce composite Pins Reinforced Composite • High strength cable gland of the cable outlet Housing 11 mm to 18 mm For Cable Screw Contact Contact Termination Operator must confirm voltage compatibility of prime mover and trailer. *Caution 8HG 227 440-001 Park Socket Housing Suitable For Used when Plug is not connected to actual socket, to prevent the exposure to environment. Reinforced Composite 7P ABS/EBS Plugs 13P & 15P Plugs ACCESSORIES [email protected]   hella.com.au 381

ELECTRICAL CONNECTORS ACCESSORIES Magcode® Power Outlet Systems 38 18 60 System with magnetically coded flat contacts. 85 Port (outlet) and clip (connector) feature powerful magnets with integral switching 20 12 38 function ensuring stable connection and safe power supply. Easy to install, 100% short circuit HMPS12VKIT 8KW 910 169-001 h POWER SYSTEM - 12 V DC proof. Suits retro-fitting. HMPS24VKIT HMPS12VPT 8KW 910 169-351 h POWER SYSTEM - 24V DC HMPS24VPT HMPS12VCP 8KW 910 170-021 h POWER PORT - 12 V DC HMPS24VCP Mounting 8KW 910 169-341 h POWER PORT - 24 V DC Maximum Load Rated Voltage 8KW 910 168-001 h POWER CLIP - 12 V DC Locking Mechanism Protection 8KW 910 168-241 h POWER CLIP - 24 V DC 28mm dia. (M28) opening 25A @ +20oC 25A @ +70oC 20A @ +85oC 12V DC 24V DC Magnetic Connection Port (front side installed) IP6K9K Clip (not connected) IP40 Port (connection side) IP5K0 Clip (on port) IP42 MagCode® Pro Power Outlet Systems 24 25.5 38 65 27.4 Advanced system for higher power circuits 91 featuring additional mechanical twist lock for greater security (higher separation forces) and reliable prevention from arcing. 38 HMPSPRO12VKIT 8KW 910 169-011 h POWER SYSTEM PLUS - 12 V DC HMPSPRO24VKIT HMPSPRO12VPT 8KW 910 169-331 h POWER SYSTEM PLUS - 24V DC HMPSPRO24VPT HMPSPRO12VCP 8KW 910 170-011 h POWER PORT PLUS - 12 V DC HMPSPRO24VCP Mounting 8KW 910 170-241 h POWER PORT PLUS - 24 V DC Maximum Load Rated Voltage 8KW 910 168-011 h POWER CLIP PLUS - 12 V DC Locking Mechanism Protection 8KW 910 168-251 h POWER CLIP PLUS - 24 V DC 28mm dia. (M28) opening 26A @ +20oC 25A @ +70oC 20A @ +85oC ACCESSORIES 12V DC 24V DC Magnetic Connection plus mechanical twist lock Port (front side installed) IP6K9K Clip (not connected) IP40 Port (connection side) IP5K0 Clip (on port) IP42 382 hella.com.au   [email protected]

ACCESSORIES ELECTRICAL CONNECTORS 31 2 Pole Socket 38 Chrome-plated 2-pin polarised. All-brass connection. 2741 8JB 950 987-001 h SOCKET Maximum Load 22A @ 12V Mounting Surface Mount ( 3x3mm holes). 37 2 Pole Plug 25 Chrome-plated 2-pin polarised. All-brass h SOCKET construction. Waterproof gland cable entry. 2742 8JA 950 988-001 Maximum Load 22A @ 12V 2746 9NM 004 208-002 Grommet - Surface Mount - 8mm Cable Dimensions Up to 8mm diameter. 32 Chrome-plated Grommet ensures waterproof cable entry. All-brass construction. 18 h GROMMET 2747 9NM 004 209-002 Grommet - Surface Mount - 12mm ACCESSORIES Cable Dimensions Up to 12mm diameter. 38 Chrome-plated Grommet ensures waterproof 18 cable entry. All-brass construction. h GROMMET [email protected]   hella.com.au 383

ELECTRICAL CONNECTORS ACCESSORIES h PLUG 2 Pole Plug h SOCKET h SOCKET 21 36 25 h SOCKET 20 5 h SOCKET 4914 8JA 002 262-021 Maximum Load 16A @ 12V 8A @ 24V Sockets to Suit P/Ns 4915, 4916, 4917 and 4918. 2 Pole Socket with Cover 40 4 21 12 24 2 Pole Socket with Cover 9 - Insulated Earth 14 16 13 4915 28 Mounting Maximum Load 8JB 001 946-023 19mm diameter opening. 16A @ 12V 8A @ 24V 36 5 26 10 14 20 13 16 16 4916 13 Mounting 22 Maximum Load 8JB 004 777-013 19mm diameter opening. 16A @ 12V 8A @ 24V 2 Pole Surface Mount Socket 37 57 25 ACCESSORIES 13 4917 Mounting 8JB 004 123-005 Maximum Load Surface Mount. 16A @ 12V 8A @ 24V 2 Pole Socket with Metal Earth 39 5 20 9 26 Tab and Cover 11 18 35 13 43 27 4918 8JB 905 388-001 Mounting 22mm diameter opening. Maximum Load 16A @ 12V 8A @ 24V 384 hella.com.au   [email protected]

ACCESSORIES ELECTRICAL CONNECTORS 4950 8JA 905 395-001 2 Pole Power Plug Maximum Load 8A @ 12V 4A @ 24V 73 26 Suitable for standard cigarette sockets. Socket to Suit 4942 & 4943 20 8 h PLUG 78 25 2 Pole Fused Power/DIN Plug 11 8 Combination Lighter/DIN 2 Pole Plug with 4952 8JA 007 589-003 h PLUG in-built 8A ceramic type fuse suitable for both Maximum Load 8A @ 12V cigarette lighter and DIN ISO 4165 sockets Sockets to Suit P/Ns 4913, 4915, 4916, 4917, 4918, 4939, 4942 and 4943. (standard 2 pole sockets). 28 2 Pole Power Socket 55 2 Pole lighter size Power Socket with h SOCKET protective cover for connection of a variety of electrical accessories. 4943 8JB 008 023-001 Maximum Load 15A @ 12V Plugs to Suit P/Ns 4950, 4951, 4952 & 4939. 78 25 2 Pole Power Socket - Twin DIN Output 11 8 Twin Power Socket featuring two DIN 1465 4939 8JB 008 032-001 h SOCKET output sockets for connection of accessories. ACCESSORIES Maximum Load 10A Plugs into standard vehicle cigarette lighter sockets. Primary lighter plug connection features a removable extension piece allowing the unit to also plug into DIN 2 pole sockets if required. [email protected]   hella.com.au 385

ELECTRICAL CONNECTORS ACCESSORIES h SOCKET 2 Pole Power Socket 42 34 18 32.5 - Illuminated - 12V h 12 VOLTS 8 23 h 24 VOLTS 2-pole cigarette-lighter-size Power Socket 13 with protective cover and illuminated collar for 4942 h SOCKET connection of a variety of electrical accessories. Voltage 22 Maximum Load 32 h PLUG Globes to Suit Sockets to Suit 8JB 008 023-011 12V Globe included 15A @ 12V 12V (W121.2) 24V (W241.2) P/Ns 4950, 4951, 4952 & 4939. Cigarette Lighter - Illuminated 72 41 Illuminated Cigarette Lighter with inbuilt globe. 33 29 Ready to light in 10 seconds. 20 4937 8EZ 008 021-001 4938 8EZ 008 021-011 Voltage 12V 24V Globes to Suit 12V (W121.2) 24V (W241.2) 4 Pole SOCKET 31 38 Chrome-plated 4-pin polarised. All-brass construction. 2744 8JB 950 989-001 Mounting Surface Mount ( 3 x 3mm holes) Maximum Load 22A @ 12V ACCESSORIES 4 Pole Plug 37 25 Chrome-plated 4-pin polarised. All-brass construction. Waterproof gland cable entry. 2745 8JA 950 990-001 Maximum Load 22A @ 12V 386 hella.com.au   [email protected]

ACCESSORIES ELECTRICAL CONNECTORS 63 45 63 Jump Start Terminals 78 Heavy duty, high capacity Jump-Start HM7546J 8JB 177 305-001 JUMP START TERMINAL Connectors for vehicles and equipment. Ideal HM7546KIT 8HG 177 305-031 JUMP START TERMINAL KIT for use where access to terminals is restricted HM7546P 8JA 177 305-101 JUMP START PLUG or dangerous. Eliminates chance of cross Spare Parts HM7546B polarity connections through the specially HM7546C shaped plug. Reduces chance of sparking and possible ignition of flammable materials. Kit contains terminal, bracket and cap. Terminal Bracket 1 Terminal Cap 2 HM7546J 1 HM7546B 2 HM7546C Terminal Kit HM7546P 2782 8JA 006 801-802 h 2 POLE PLUG & SOCKET Weatherproof Connectors 2783 2784 8JA 006 803-802 h 3 POLE PLUG & SOCKET Plastic construction with screw-type 2785 connection and rubber O-ring seal for Mounting 8JA 006 805-802 h 4 POLE PLUG & SOCKET waterproof connection. Strain relief for plug Maximum Load cable and a protective cover to protect socket when not in use. Cable Dimensions Protection 8JA 006 807-802 h 7 POLE PLUG & SOCKET Suitable for surface mounting with mounting base, Part No. 2786 2, 3 and 4 pole –16A at 12V (Suitable for up to 48V) 7 pole – 10A to 12V (Suitable for up to 48V) Cross section up to 2.5m2 (5mm insulation) I P67 31 22 31 22 31 22 68 33 68 33 68 33 2784 Pin 2782 Pin 2783 Pin 2785 Pin ACCESSORIES 2786 Mounting Base Surface Mounting Base to suit 8XT 006 798-002 h Part Nos 2782-2785. Eliminates need to recess the socket. [email protected]   hella.com.au 387

HORNS 22 ACCESSORIES Ø8.5 Low Tone Disc Horn 12 VOLT DC 24 VOLT DC Single bolt mount. 92mm diameter. 122 122 97 54 6001 3AL 002 952-011 – 400Hz 6002 3BA 002 768-381 – 335Hz Power Consumption 72W 6A - 12V DC, 3A - 24V DC Frequency 6001 - 400Hz 6002 - 335Hz Sound Level 115dB @ 2.0m Super Tone S70 Horn 60 The HELLA Super Tone S70 disc horn provides Connection outstanding size/performance ratio with a long- 70 52 6.3mm flat plug copper range sound in a compact space-saving body. 6029 3AL 922 196-011 Rated voltage 12V DC Power Consumption 30 W Frequency 420 Hz (high tone) Acoustic pressure 112 dB @ 2 metres level at 2m Approval ECE R28 Bracket M8 mounting screw Sharp Tone M26S Horn Set 54 108 The HELLA Sharp Tone disc horn has a focused 122 and high-penetrating power tone for drivers who ACCESSORIES want to be heard. Robust yellow protective grille Connection and high corrosion protection make the Sharp 6.3mm flat plug copper Tone Horn ideal for tough off-road use. Unique design provides a dramatic look under your front 6028 3BB 922 000-731 grille. Rated voltage 12V DC Power Consumption 2 x 42 W Frequency 415 Hz (high tone) / 350 Hz (low tone) Acoustic pressure 115 dB @ 2 metres level at 2m Approval ECE R28 Bracket M8 mounting screw Kit Includes High-Tone Unit Low-Tone Unit Relay Mounting Brackets Step-by-Step Mounting Instructions 388 hella.com.au   [email protected]

ACCESSORIES HORNS 85 123 Super Tone B133 Horn Set 135 The HELLA Super Tone disc horn has a focused and high-penetrating power tone for drivers Connection who want to be heard. Robust housing and 6.3mm flat plug copper high corrosion protection make the Super Tone Horn ideal for tough off-road use. Unique design 6036 3AG 003 399-801 provides a dramatic look under your front grille. Rated voltage 12V DC Power Consumption 2 x 66 W Frequency 300 Hz (low tone) / 500 Hz (high tone) Acoustic pressure 118 dB @ 2 metres level at 2m Approval ECE R28 Bracket M8 mounting screw Kit Includes High-Tone Unit Low-Tone Unit Relay Mounting Brackets Step-by-Step Mounting Instructions 23 126 24 Twin Tone Scroll Horn - Set of 2 Ø9 126 Includes 12 volt relay. 97 Packaging 6004 3FH 007 424-804 110 100 Power Consumption Voltage h 12 VOLT DC Frequency 72W x 2 6A x 2 Sound Level 12V DC High Tone 500Hz Low Tone 400Hz Combined 110dB @ 2.0m Ø9 11 65 Twin Tone Scroll Horn - Set of 2 57 Galvanised metal housing and plastic horn. ACCESSORIES Safe from corrosion. 93 52 95 6005 3FH 007 728-835 h 12 VOLT DC Power Consumption Voltage 72W x 2 6A x 2 Frequency 12V DC Sound Level High Tone 500Hz Low Tone 400Hz Combined 110dB @ 2.0m Packaging [email protected]   hella.com.au 389

HORNS 166 ACCESSORIES h 12 VOLT DC Air Horn Kit - Triple Trumpet 217 h 12 VOLT DC Polished stainless steel triple electric horns h 24 VOLT DC including support brackets. 158 6007 Part No. 60037PD 003 001-623 Mounting Installation accessories included. Current Draw 20A @ 12V DC Power Consumption 240W Sound Level 1 18dB (at 2.0 metres) Frequency 780 / 820 / 880Hz Operating Pressure 110kPA (16psi) Dual Trumpet Air Horn Kit 166 Installation accessories included. 158 6014 3PB 003 001-602 6027 Part No. 6031P4B 003 001-612 Mounting Installation accessories included. Current Draw 20A @ 12V DC 10A @ 24V DC Power Consumption 240W Sound Level 118dB Frequency 780/840Hz Operating Pressure 110Kpa (16psi) Blister packaging ACCESSORIES 390 hella.com.au   [email protected]

ACCESSORIES HORNS 311 90 Compressed Air Operated Horn 119 97 Ideal for trucks and buses. Grey shock-proof 6025 3PA 004 206-041 12 VOLT DC and corrosion resistant trumpet. This horn is 24 VOLT DC designed to operate directly from the truck’s air supply via the existing horn-button or separate switch. 6026 3PA 004 206-051 Power Consumption 36W @ 12V DC, 48W @ 24V DC 3A @ 12V DC 2A @ 24V DC Sound Level 118dB (at 2.0m) Frequency 400Hz Operating Pressure 620-860Pa (90 -125psi) Air Tube: 10mm internal diameter. 415 Highway Compressed Air Operated 80 Twin Horn 6032 3PB 005 411-002 80 Air Tube Sound Level 6mm dia (4mm dia. internal) Compressed-Air-Operated Twin Horn featuring Frequency 118dB (at 2.0 metres) rust-proof, chrome-plated housing with black Operating Pressure h base and two trumpets. Designed to operate Accessories 300 / 320Hz off commercial vehicle air brake systems. The horn unit is supplied with brass fittings, mounting gear, connecting air tube, mounting gasket and detailed instructions. 4-8.5 bar 6033 ■ Pull-operated hand valve  1 6035 ■ E lectro valve – 24V DC, 20W (activated via horn push-button)  2 1 P/N 6033 2 P/N 6035 ACCESSORIES [email protected]   hella.com.au 391

HEAVY DUTY REVERSING ALARMS ACCESSORIES Heavy Duty Reversing Alarm 101 46 83 Heavy Duty Reversing Alarm with integral 74 Power Supply AMP connection and fixed sound pressure 6008 levels between 90 and 107dB @ 1.2 metres. 6009 AMP Plug Epoxy encapsulated circuit boards offer 6010 protection against humidity, dirt and vibration. 6011 Mounting Voltage 3SL 009 148-001 90dB Current Draw 3SL 009 148-011 97dB 3SL 009 148-021 107dB 3SL 009 148-061 97dB Integrated universal mounting bracket for upright, pendant or surface mounting. 12-24V DC (P/N 6011 - 12-48V DC) P/N 6008 0.1A - 90db P/N 6009 0.2A - 97dB P/N 6010 0.3A - 107dB P/N 6011 0.2A - 97dB Frequency 60 signals per minute (± 20%). Sound Level P/N 6008 90 ± 4dB @ 1.2m 1 P/N 9.6008.05 2 P/N 9.6008.06 P/N 6009 97 ± 4dB @ 1.2m P/N 6010 107 ± 4dB @ 1.2m P/N 6011 97 ± 4dB @ 1.2m Temperature Operating range -40°C to 85°C. Protection Spare Parts IP 66 (Protection against dust and high pressure washing) 9.6008.05 Rubber boot for AMP connection 1 9.6008.06 Wiring loom for AMP connection (2metres) 2 6041 Activating Switch 3 (see page 395) 3 P/N 6041 Compliance SAE J994 Multivolt Reversing Alarm 101 Power Supply and Signal Horn 83 46 Heavy Duty Reversing Alarm with integrated, 74 dual-tone Signal Horn. Reverse polarity and transient voltage spike protection. 6012 3SL 009 148-071 102dB Mounting 3 P/N 6041 Voltage Integrated universal mounting bracket for upright, pendant or surface mounting. Current Draw ACCESSORIES Frequency 12-24V DC Sound Level 0.3A Temperature Range Protection Back-up alarm 100 - 1500Hz Spare Part High Tone 1000 - 1500Hz Compliance Low Tone 80Hz (+/- 37%) 102 +/- 4dB at 1.2m -40°C to + 85°C IP 66 (Protection against dust and high pressure washing) 6041 Activating Switch 1 (see page 395) SAE J994 Type F 392 hella.com.au   [email protected]

ACCESSORIES HEAVY DUTY REVERSING ALARMS Power Supply 101 Heavy Duty Reversing Alarm 83 46 6013 Heavy Duty Reversing Alarm with integral Mounting 74 AMP connection. Automatically adjusts Voltage sound pressure level to changing noise Current Draw AMP Plug environments. Solid state electronics, Frequency self-adjusting to the minimum of 5dB Sound Level 3SL 009 148-101 82-102dB above surrounding noise levels effectively Temperature reducing irritation. Epoxy encapsulated circuit Protection Integrated universal mounting bracket for upright, pendant or surface mounting. boards offer protection against humidity, Spare Parts dirt and vibration. 12-24V DC Compliance 0.4A 60 signals per minute (± 20%). 82 - 102 ± 4dB @ 1.2m Operating range -40°C to 85°C. IP 66 (Protection against dust and high pressure washing) 9.6008.05 Rubber boot for AMP connection 1 9.6008.06 Wiring loom for AMP connection (2metres) 2 6041 Activating Switch 3 (see page 395) SAE J994 1 P/N 9.6008.05 2 P/N 9.6008.06 3 P/N 6041 20 Heavy Duty Reversing Alarm Power Supply 102 40 68 Heavy Duty Reversing Alarm equipped with reliable solid-state electronics. The compact 6015 8mm O design allows for installation on forklifts and Mounting other similarly sized vehicles. Manufactured in Voltage 3SL 910 035-001 102dB accordance with SAE J1446 and encapsulated Current Draw Surface mount (2 x 8.3mm dia. mounting holes) in weather-resistant nylon housing for Frequency 12-24V DC maximum protection against dust, moisture Sound Frequency 0.3A and vibration. Reverse-polarity and transient- Sound Level 80 signals per minute (typical). voltage-spike protected. Temperature 1200 Hz (typical) Protection 102 ± 4dB @ 1.2m ACCESSORIES Accessory Operating range -40°C to +74°C. IP 55 6041 Activating Switch 1 (see page 395) 3 P/N 6041 393 [email protected]   hella.com.au

HEAVY DUTY REVERSING ALARMS ACCESSORIES Heavy Duty Multivolt Reversing 127 96 Alarm - 107dB 76 113 6016 Heavy Duty Reversing Alarm with fixed sound pressure level of 107dB at 1.2 metres. Robust Power Supply glass filled nylon housing and mounting plate protected with powder-coat paint for 70 maximum durability. Completely sealed against humidity, dirt and vibration. Reverse- 6016 3SL 996 139-102 107dB polarity and transient-voltage-spike protected. Mounting Manufactured in accordance with SAE J944 Voltage Integrated universal mounting bracket for upright, pendant or surface mounting. standards Current Draw Frequency Multivolt (12-36V DC) Sound Level Temperature Range 0.4A Protection 1040-1560Hz 107 +/- 4dB at 1.2m -40°C to + 85°C IP 66 (Protection against dust and high pressure washing) Heavy Duty Multivolt Reversing 146 Power Supply Alarm - 112dB 103 78 Heavy Duty Reversing Alarm with fixed sound pressure level of 112dB at 1.2 metres. Robust 93 glass filled nylon housing and mounting 129 plate protected with powder-coat paint for maximum durability. Completely sealed 6017 3SL 996 139-112 112dB against humidity, dirt and vibration. Reverse- Mounting polarity and transient-voltage-spike protected. Voltage Integrated universal mounting bracket for upright, pendant or surface mounting. Manufactured in accordance with SAE J944 Current Draw standards. Frequency Multivolt (12-36V DC) Sound Level Temperature Range 0.4A Protection 1000-1500Hz 112 +/- 4dB at 1.2m -40°C to + 85°C IP 66 (Protection against dust and high pressure washing) ACCESSORIES Heavy Duty Multivolt Reversing 146 Power Supply Alarm, 87 - 112dB Automatic 103 78 Heavy Duty Reversing Alarm automatically adjusts sound pressure level to changing noise 93 environments. Solid-state electronics self- 129 adjust to a minimum of 5dB above surrounding noise levels effectively reducing irritation and 6018 3SL 996 139-002 87 - 112dB hearing impairment. Robust steel housing and Mounting mounting plate protected with powder-coat Voltage Integrated universal mounting bracket for upright, pendant or surface mounting. paint for maximum durability. Current Draw Frequency Multivolt (12-24V DC) Sound Level Temperature Range 0.4A Protection 960-1440Hz 87 to 112 +/- 4dB at 1.2m -40°C to + 85°C IP 66 (Protection against dust and high pressure washing) 394 hella.com.au   [email protected]

ACCESSORIES WARNING AND REVERSING ALARMS Warning Buzzer 50 5 120 23 Piercing continuous sound. Suitable for a variety of applications e.g. headlamp, oil, 43 handbrake, indicator, temperature, door close/open, brake fluid, etc. 6021 3SB 905 413-001 h 85dB 6022 3SB 905 413-241 h Voltage P/N 6021 12V DC P/N 6022 24V DC Power Consumption 6W Current Draw 12V DC Less than 50mA 24V DC Less than 25mA Sound Level 85dB 50 48 Multivolt Reversing Alarm 26 21 Durable intermittent Reversing Alarm. 64 48 36 Easily fitted to any car or truck’s reversing lamp wiring system or wire to a switch on Power Supply your dashboard. 6023 3SL 950 751-011 10 Ø9 Voltage 12-36V DC Current Draw Less than 50mA. 89dB Sound Level 89 +/- 2dB (at 1.2m) 6041 6EH 905 414-001 OFF-ON Activating Switch ACCESSORIES Mounting Adjacent to the gear shift lever or linkage. Protection IP 55 (Protection against dust and water jets) Single direction. Off-on switch. Suits all Suits 6043 - 6049 and 6008 - 6015 reversing alarms and buzzers. [email protected]   hella.com.au 395

WARNING AND REVERSING ALARMS ACCESSORIES Evacuator Plus Heavy Duty 35 62 Power Supply Reversing Alarm 74 76 The Evacuator Plus Heavy Duty Reversing 6043 3SL 905 415-001 97dB and Warning Alarm features a lightweight 6044 piezoelectric output circuit. Mounting 3SL 905 415-011 112dB The reduced weight of just 129 grams Voltage Universal mounting comes complete with heavy-gauge plated steel makes the Evacuator Plus virtually immune Current Draw mounting bracket. Can be installed on positive and negative ground vehicles. to vibration damage. Unique nickel plated Frequency conductive terminal inserts, which provide Sound Level P/N 6043/6044 - 12-48V DC power to the alarm, are hermetically sealed, giving superior water resistant performance. Temperature Less than 0.10A Protection The housing is constructed of high impact Compliance 80 signals per minute +/- 20% ABS plastic resin and is environmentally sealed against moisture, dust and corrosion. P/N 6043 97dB @ 1.2m Evacuator Plus reversing and warning alarms P/N 6044 112dB @ 1.2m are steam cleanable. Operating range -40°C to 74°C IP 55 (Protection against dust and water jets) SAE J994 Reversing Alarm 128 95 77 Power Supply Reactor Heavy Duty Reversing and Warning 6047 + 82-107dB AUTO Alarm automatically adjusts to changing noise Mounting - environments. State-of-the-art, solid-state Voltage electronics self-adjust to a minimum of 5dB Current draw 3SL 905 415-021 above surrounding noise levels, thus reducing Frequency Universal mounting brackets. irritation, complaints and hearing impairment. Sound level 9 - 56V DC (12 - 48V DC Systems) Temperature Less than 0.25A Reactor alarms feature integral universal Protection 80 signals per minute. 1.15kHz mounting brackets and high impact ABS plastic Compliance 82 to 107dB @ 1.2m resin housing and are totally environmentally -40°C to 77°C sealed in epoxy to guard against moisture, IP 55 (Protection against dust and water jets) dirt and vibration. SAE J994 ACCESSORIES 396 hella.com.au   [email protected]

ACCESSORIES WARNING AND REVERSING ALARMS Power Supply Reversing Alarm 6048 Durable intermittent Reversing Alarm. Mounting Easily fitted to any car or truck’s reversing Voltage lamp wiring system or wire to a switch on Current draw your dashboard. Frequency Sound level 3SL 905 415-031 87-112dB AUTO Temperature Universal mounting brackets. Protection 9 - 36V DC (12 - 24V DC Systems) Compliance Less than 0.50A 80 signals per minute. 1.15 kHz 87 to 112dB @ 1.2m -40°C to 77°C IP 55 (Protection against dust and water jets) SAE J994 Power Supply Reversing Alarm 6049 3SL 905 415-041 107/112dB MANUAL Durable intermittent Reversing Alarm. Easily fitted to any car or truck’s reversing lamp wiring system or wire to a switch on your dashboard. Mounting Universal mounting brackets. Voltage 6 - 36V DC (12 - 24V DC Systems) Current draw Less than 0.8A Frequency 80 signals per minute. 1.2 kHz Sound level 107 or 112dB @ 1.2m Temperature -40°C to 77°C Protection IP 55 (Protection against dust and water jets) Compliance SAE J994 Reactor alarms comply with SAE J994 requirements and OSHA regulations. Power Supply 3SL 012 870-001 92dB Broadband Reversing Alarm ACCESSORIES 6051 Reversing Alarm with multi-frequency 6052 broadband sound. Mounting Voltage 3SL 012 871-001 97dB Current Draw Frequency Integrated universal mounting bracket for upright, pendant or surface mounting. Sound Level 12-24V DC Temperature Protection Max. 0.5A Compliance White noise/broadband. P/N 6051 92 ± 4dB @ 1.2m P/N 6052 97 ± 4dB @ 1.2m Operating range -40 to 85°C. IP 68 (Protection against dust and water immersion) SAE J994 [email protected]   hella.com.au 397

TURBO FAN 188 95 ACCESSORIES 195 Turbo Fan 12 VOLT DC 6100 8EV 003 361-001 24 VOLT DC Turbo Fans provide high capacity at low power consumption. Features include impact 6100-W 8EV 003 361-021 – White resistant housing, low-noise operation and soft plastic impellers, shielded by sturdy protective grille for added safety. Fans can be turned in all directions, and locked in position. Airflow can be regulated by two-stage switch. 6101 8EV 003 361-011 Power Consumption 6.5W Cable Length Pre-wired with 1.4m of cable. Min. Service Life 5000 hours (tested under extreme conditions) BATTERY BOOSTER CABLES Battery Booster Cables 8852 8KA 910 236-011 Maximum Load 500A Durable Battery Booster Lead Set featuring fully-insulated clamps with shunt and 4.0 metres of jumper lead. Copper cross-section 39.5mm² (490/0.32mm). ACCESSORIES Battery Booster Clamps 8853 8KX 910 236-021 ■ RED 8854 8KX 910 236-001 ■ BLACK Fully-insulated Battery Booster Clamp with Maximum Load 500A shunt featuring chrome-plated finish. 398 hella.com.au   [email protected]