T&S 2020 Porcelain Catalog_direct

TILE & STONE Porcelain Product Guide Tempest, 155 Grey Mix (8\" × 48\") Casino, 121 Calacatta (24\" square) Tessuto, 550 Fumo (12\" × 24\") Savannah, 100 Pearl (8\" × 48\") shawfloors.com direct 05.20.2020 HS-317901-18

TILE & STONE Porcelain Product Guide PORCELAIN PORCELAIN continued PORCELAIN continued Altezza NEW! 2020 Iberian Brick Timeworn Arcadian Scene Independence Traditions Artisan Industry Tulum Tide Basis Islander Unveil Casino NEW! 2020 Jackson Urban Co-op Classico Marlow Valentino Coliseum Maximus Visionary Contour Napa Plank Voyage Courtside Petrified Hickory Zenith Covenant Range FEATURES & BENEFITS NEW! 2020 Crown Revival Warranty Crystal Riviera CDI Current Rockwood DCOF Diva San Francisco Porcelain Edinburg Santa Fe PEI Emberwood Savannah Shade & Texture Rating Fired Hickory Sculpture Polished Tile Fontana Senate Fusion Sophia Genesis Studio Glee Tempest Grand Strands Tessuto Harvest Timbered Hacienda 2 BACK TO TABLE OF CONTENTS

TILE & STONE ALTEZZA porcelain 150 Carrara 3 BACK TO TABLE OF CONTENTS

ALTEZZA TILE & STONE Style Number CS85X CS86X CS88X CS90X CS87X Construction porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 12\" × 24\" 13\" × 13\" 20\" × 20\" 2.75\" × 12\" 12\" × 12\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 350 > 350 > 350 > 350 > 350 Water Absorption < 0.5% < 0.5% < 0.5% < 0.5% < 0.5% DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V2 V2 V2 V2 V2 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors CS87X mosaic 150 Carrara 150 Carrara 4 BACK TO TABLE OF CONTENTS

TILE & STONE ARCADIAN SCENE porcelain 270 Moorland wall tile – 250 Range | floor tile – 100 Urban Co-op 100 Meadow 750 Tillage 5 BACK TO TABLE OF CONTENTS

ARCADIAN SCENE TILE & STONE Style Number CS81W Construction porcelain Tile Type floor Tile Size 12\" × 48\" Edges rectified Technical Wear Rating Group 4 Break Strength > 250 Water Absorption < 0.5% Pre-Consumer Recycled Content 31% Post-Consumer Recycled Content 9% DCOF > 0.42 Shade Variation V4 Installation Area Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Meadow 250 Range 270 Moorland 570 Terrain 750 Tillage MADE IN THE USA 6 BACK TO TABLE OF CONTENTS

TILE & STONE ARTISAN porcelain 150 Taupe 550 Ash 570 Warm Grey 700 Clay 7 BACK TO TABLE OF CONTENTS

ARTISAN TILE & STONE Style Number CS59V CS09V CS08V CS11V CS12V Construction porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 18\" × 18\" 12\" × 24\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 450 > 450 > 450 > 450 > 450 Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 V3 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 150 Taupe 550 Ash 570 Warm Grey 700 Clay CS12V mosaic 150 Taupe 550 Ash 570 Warm Grey 700 Clay 8 BACK TO TABLE OF CONTENTS

TILE & STONE BASIS porcelain 190 Zinc 590 Carbon 560 Lithium 180 Earth 9 BACK TO TABLE OF CONTENTS

BASIS TILE & STONE Style Number CS21W CS20W CS23W CS22W Construction porcelain porcelain porcelain porcelain Tile Type floor tile floor tile bullnose basketweave mosaic Tile Size 16\" × 32\" 12\" × 24\" 2.75\" × 12\" 12\" × 12\" × 2\" Technical Wear Rating Group 4 4 4 4 Break Strength > 350 > 350 > 350 > 350 Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 DCOF > 0.5 > 0.5 > 0.5 > 0.5 Shade Variation V3 V3 V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 180 Earth 190 Zinc 560 Lithium 590 Carbon 10 BACK TO TABLE OF CONTENTS

TILE & STONE CASINO porcelain 121 Calacatta 155 Zebrino 151 Statuario 11 BACK TO TABLE OF CONTENTS

CASINO POLISHED Nano sealed — does not require sealing on most normal applications TILE & STONE Uses the chemical method as described above. Suitable for most residential, but commercial may benefit from a sealer application. Sealer recommended if using a high-performance or contrasting grout color. Style Number CS37V CS88Z CS89Z CS87Z CS36V CS35V Construction porcelain porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile floor tile floor tile floor tile polished matte polished matte polished polished Tile Size 24\" × 24\" 16\" × 32\" 16\" × 32\" 12\" × 24\" 12\" × 24\" 4\" × 12\" Edges rectified rectified rectified rectified rectified rectified Technical Wear Rating Group 4 4 4 4 4 4 Break Strength > 500 lbs. > 500 lbs. > 500 lbs. > 450 lbs. > 500 lbs. > 500 lbs. Water Absorption < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 DCOF < 0.42 > 0.42 < 0.42 > 0.42 < 0.42 < 0.42 Shade Variation V2 V2 V2 V2 V2 V2 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors* Exteriors Exteriors* Exteriors Exteriors* Exteriors* *exterior wall only for polished product A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 121 Calacatta 151 Statuario *155 Zebrino (not available in CS37V) 200 Allure 500 Stella 12 BACK TO TABLE OF CONTENTS

TILE & STONE CASINO porcelain 500 Stella 121 Calacatta 13 BACK TO TABLE OF CONTENTS

CASINO POLISHED Nano sealed — does not require sealing on most normal applications TILE & STONE Uses the chemical method as described above. Suitable for most residential, but commercial may benefit from a sealer application. Sealer recommended if using a high-performance or contrasting grout color. Style Number CS90Z CS38V CS91Z CS40V CS39V Construction porcelain porcelain porcelain porcelain porcelain Tile Type bullnose bullnose basketweave basketweave hexagon mosaic matte polished polished matte polished Tile Size 2.75\" × 12\" 2.75\" × 12\" 12\" × 12\" × 2\" 12\" × 12\" × 2\" 11.5\" × 12\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 500 lbs. > 500 lbs. > 500 lbs. > 500 lbs. > 500 lbs. Water Absorption < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 DCOF > 0.42 < 0.42 < 0.42 > 0.42 < 0.42 Shade Variation V2 V2 V2 V2 V2 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors* Exteriors* Exteriors* Exteriors Exteriors* * exterior wall only for polished product A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors CS39V hexagon mosaic 121 Calacatta 151 Statuario 155 Zebrino 200 Allure 500 Stella CS40V basketweave mosaic 121 Calacatta 151 Statuario 155 Zebrino 200 Allure 500 Stella 14 BACK TO TABLE OF CONTENTS

TILE & STONE CLASSICO porcelain 200 Beige 150 Light Grey 100 Ivory 15 BACK TO TABLE OF CONTENTS

CLASSICO TILE & STONE Style Number CS71F CS70F CS69F CS75F CS74F Construction porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile surface bullnose mosaic Tile Size 12\" × 24\" 18\" × 18\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength 398 403 302 302 302 Water Absorption % 0.35 0.35 0.35 0.35 0.35 DCOF 0.55 0.55 0.55 0.55 0.55 Shade Variation V2 V2 V2 V2 V2 Installation Area Floors, Walls, Exteriors Floors, Walls, Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors CS72F 10” × 16” wall CS73F 2” × 10” listello 100 Ivory 200 Beige 100 Ivory 150 Light Grey 200 Beige Accents CS74F 13” × 13” × 2” mosaic 100 Ivory 150 Light Grey 200 Beige 16 BACK TO TABLE OF CONTENTS

TILE & STONE COLISEUM porcelain 700 Toast 500 Pewter 100 Shell 550 Coal 17 BACK TO TABLE OF CONTENTS

COLISEUM TILE & STONE **Polished product is not pre-sealed and requires sealing prior to and again after grouting. Style Number CS90Q CS91Q CS89Q CS92Q CS93Q CS94Q CS95Q Construction porcelain porcelain porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile floor tile bullnose bullnose basketweave polished** matte matte matte polished** matte mosaic matte Tile Size 12\" × 24\" 12\" × 24\" 18\" × 36\" 6\" × 36\" 3\" × 12\" 3\" × 12\" 12\" × 12\" × 2\" Edges rectified — rectified rectified — — — Technical Wear Rating Group 4 4 4 4 4 4 4 Break Strength > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. > 292 lbs. Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 DCOF < 0.42 > 0.5 > 0.5 > 0.5 < 0.42 > 0.5 > 0.5 Shade Variation V2 V2 V2 V2 V2 V2 V2 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors* Exteriors Exteriors Exteriors Exteriors* Exteriors Exteriors * exterior wall only for polished product A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Shell 500 Pewter 550 Coal 700 Toast CS95Q mosaic 12\" × 12\" × 2\" 100 Shell 500 Pewter 550 Coal 700 Toast 18 BACK TO TABLE OF CONTENTS

TILE & STONE CONTOUR porcelain 550 Void 150 Cast 500 Evolve 700 Emerge 19 BACK TO TABLE OF CONTENTS

CONTOUR TILE & STONE Style Number CS65Z* CS63Z CS84H CS86H CS85H Construction porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile bullnose mosaic Tile Size 20\" × 20\" 13\" × 13\" 12\" × 24\" 3\" × 12\" 12\" × 12\" × 2\" × 2\" Technical Wear Rating Group 4 4 4 4 4 Break Strength > 400 > 300 > 400 > 350 > 350 Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 DCOF > 0.65 > 0.65 > 0.65 > 0.65 > 0.65 Shade Variation V2 V2 V2 V2 V2 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors Exteriors *only available in colors Emerge and Evolve A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 150 Cast 500 Evolve* 550 Void 700 Emerge* 20 BACK TO TABLE OF CONTENTS

TILE & STONE COURTSIDE porcelain 500 Taupe 100 Bone 550 Anthracite 700 Brown 21 BACK TO TABLE OF CONTENTS

COURTSIDE TILE & STONE Style Number CS80Q CS79Q CS82Q CS83Q Construction porcelain porcelain porcelain porcelain Tile Type floor tile floor tile bullnose mosaic Tile Size 12\" × 24\" 18\" × 18\" 2.75\" × 12\" 12\" × 12\" × 2\" Technical Wear Rating Group 4 4 4 4 Break Strength 450 450 450 450 Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 DCOF > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Bone 500 Taupe 550 Anthracite 700 Brown CS83Q mosaic 100 Bone 500 Taupe 550 Anthracite 700 Brown 22 BACK TO TABLE OF CONTENTS

TILE & STONE COVENANT porcelain 159 Ocean 159 Ocean 23 BACK TO TABLE OF CONTENTS

COVENANT TILE & STONE Style Number CS89W CS73X Construction porcelain porcelain Tile Type floor offset mosaic Tile Size 8\" × 48\" 8\" × 23\" Technical Wear Rating Group 3 3 Break Strength > 562 > 562 Water Absorption % < 0.3 < 0.3 DCOF > 0.42 > 0.42 Shade Variation V4 V4 Installation Area Floors, Walls, Floors, Walls, Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors CS73X 8\" × 23\" Offset Mosaic 159 Ocean 24 BACK TO TABLE OF CONTENTS

TILE & STONE CROWN porcelain 200 Beige 100 White 550 Smoke 500 Grey 25 BACK TO TABLE OF CONTENTS

CROWN TILE & STONE Style Number 224TS 225TS 226TS 242TS 227TS 228TS Construction porcelain porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile hexagon mosaic bullnose mosaic Tile Size 13\" × 13\" 18\" × 18\" 12\" × 24\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" Technical Wear Rating Group Multiple* Multiple* Multiple* Multiple* Multiple* Multiple* Break Strength > 292 > 337 > 405 N/A > 292 > 292 Water Absorption % < 0.3 < 0.3 < 0.3 < 0.3 < 0.3 < 0.3 DCOF > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 > 0.42 Shade Variation V2 V2 V2 V2 V2 V2 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors Exteriors Exteriors * color 100 – 4; other colors - 3 A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 White 200 Beige 500 Grey 550 Smoke 26 BACK TO TABLE OF CONTENTS

TILE & STONE CRYSTAL porcelain 550 Dark Grey 250 Greige 500 Grey 27 BACK TO TABLE OF CONTENTS

CRYSTAL TILE & STONE Style Number CS24W CS26W CS25W Construction porcelain porcelain porcelain Tile Type floor tile bullnose mosaic Tile Size 12\" × 24\" 3\" × 12\" 12\" × 12\" × 2\" × 2\" Technical Wear Rating Group 4 4 4 Break Strength > 330 > 330 > 330 Water Absorption % < 0.5 < 0.5 < 0.5 DCOF > 0.5 > 0.5 > 0.5 Shade Variation V2 V2 V2 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 250 Greige 500 Grey 550 Dark Grey CS25W mosaic 250 Greige 500 Grey 550 Dark Grey 28 BACK TO TABLE OF CONTENTS

TILE & STONE CURRENT porcelain | ceramic 510 River Rush Basketweave Mosaic | 125 White Water 152 Niagara Crush 125 White Water 29 BACK TO TABLE OF CONTENTS

CURRENT TILE & STONE Style Number CS74Z CS75Z CS77Z CS78Z CS79Z CS80Z Construction porcelain porcelain ceramic ceramic porcelain porcelain Tile Type floor tile floor tile wall tile wall bullnose bullnose mosaic made in USA made in USA made in Italy made in Italy made in USA made in USA Tile Size 12\" × 48\" 12\" × 24\" 4\" × 12\" 4\" × 12\" 2.7\" × 12\" 12\" × 12\" Edges rectified — — — — — Technical Wear Rating Group 4 4 4 N/A N/A 4 Break Strength > 400 > 400 > 110 > 110 > 400 > 400 Water Absorption % < 0.5 < 0.5 N/A N/A < 0.5 < 0.5 Pre-consumer 31% 31% N/A N/A 31% 31% Recycled Content Post-consumer 9% 9% N/A N/A 9% 9% Recycled Content DCOF > 0.5 > 0.5 16 16 > 0.5 > 0.5 Shade Variation V3 V3 V3 V3 V3 V3 Installation Area Floors, Walls, Floors, Walls, Walls Walls Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 125 White Water 152 Niagara Crush 510 River Rush CS80Z basketweave mosaic 12\" × 12\" 125 White Water 152 Niagara Crush 510 River Rush MADE IN THE USA 30 BACK TO TABLE OF CONTENTS

TILE & STONE DIVA porcelain 100 White 100 White & 500 Black 550 Mica 31 BACK TO TABLE OF CONTENTS

DIVA Nano sealed — does not require sealing on most normal applications TILE & STONE Uses the chemical method as described above. Suitable for most residential, but commercial may benefit from a sealer application. Sealer recommended if using a high performance or contrasting grout color. Style Number CS05V CS04V CS03V* CS06V CS07V Construction porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile bullnose mosaic polished polished polished polished matte Tile Size 24\" × 24 12\" × 24\" 12\" × 12\" 3\" × 24\" 12\" × 12\" × 2\" Edges rectified rectified rectified rectified rectified Technical Wear Rating Group 4 4 4 4 4 Break Strength > 450 > 450 > 450 N/A N/A Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 < 0.5 DCOF < 0.42 < 0.42 < 0.42 < 0.42 > 0.42 Shade Variation V1 V1 V1 V1 V1 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors Exteriors * CS03V not available in colors 501 or 550 A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 White 101 Warm White 500 Black 501 Smoke* 550 Mica* CS07V matte mosaic 100 White 101 Warm White 500 Black 501 Smoke 550 Mica 32 BACK TO TABLE OF CONTENTS

TILE & STONE EDINBURG porcelain 200 Thatch 500 Smoke 700 Tobacco 33 BACK TO TABLE OF CONTENTS

EDINBURG TILE & STONE Style Number CS19W CS18W Construction porcelain porcelain Tile Type floor tile floor tile Tile Size 8\" × 48\" 6\" × 36\" Edges rectified rectified Technical Wear Rating Group 4 4 Break Strength > 300 > 300 Water Absorption % < 0.5% < 0.5% DCOF > 0.42 > 0.42 Shade Variation V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 200 Thatch 500 Smoke 700 Tobacco 34 BACK TO TABLE OF CONTENTS

TILE & STONE EMBERWOOD porcelain 571 Carbon 510 Ash 719 Burned 35 BACK TO TABLE OF CONTENTS

EMBERWOOD TILE & STONE Style Number CS69Z CS70Z CS72Z CS92Z Construction porcelain porcelain porcelain porcelain Tile Type floor tile floor tile bullnose herringbone mosaic Tile Size 7\" × 47\" 2.5\" × 16\" 2.5\" × 16\" 11\" × 13.5\" Technical Wear Rating Group 4 4 4 4 Break Strength > 400 > 400 > 400 > 400 Water Absorption % < 0.5 < 0.5 < 0.5 < 0.5 DCOF > 0.5 > 0.5 > 0.5 > 0.5 Shade Variation V3 V3 V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 510 Ash 571 Carbon 719 Burned CS92Z herringbone mosaic 510 Ash 571 Carbon 719 Burned 36 BACK TO TABLE OF CONTENTS

TILE & STONE FIRED HICKORY porcelain 220 Spicebark 600 Alder 670 Nutmeg 750 Pecan 37 BACK TO TABLE OF CONTENTS

FIRED HICKORY TILE & STONE Style Number CS37M CS63Q CS57Q Construction porcelain porcelain porcelain Tile Type floor tile bullnose mosaic Tile Size 6\" × 36\" 3\" × 24\" 12\" × 12\" Technical Wear Rating Group Multiple* Multiple* Multiple* Break Strength 400 400 NA Water Absorption % 0.5 0.5 0.5 Pre-consumer 40% 40% 40% Recycled Content DCOF > 0.42 > 0.42 > 0.42 Shade Variation V3 V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors Floors, Walls, Exteriors * colors 670 and 750 – 3; other colors – 4. Wear rating 3 not suggested for exterior floor applications. A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors CS57Q mosaic 220 Spicebark 600 Alder 670 Nutmeg 750 Pecan 220 Spicebark 600 Alder *670 Nutmeg *750 Pecan MADE IN THE USA 38 BACK TO TABLE OF CONTENTS

TILE & STONE FONTANA porcelain 500 Noce 100 Crema 570 Latte 700 Honey 39 BACK TO TABLE OF CONTENTS

FONTANA TILE & STONE Style Number CS92W Construction porcelain Tile Type floor Tile Size 8\" × 48\" Technical Wear Rating Group 4 Break Strength 520 Water Absorption % < 0.5 DCOF 0.42 Shade Variation V3 Installation Area Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than .42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Crema 500 Noce 570 Latte 700 Honey 40 BACK TO TABLE OF CONTENTS

TILE & STONE FUSION porcelain 750 Lithium 751 Copper 152 Titanium 267 Iron 571 Steel 41 BACK TO TABLE OF CONTENTS

FUSION TILE & STONE Style Number CS82Z 190TS Construction porcelain porcelain Tile Type floor tile herringbone mosaic* Tile Size 12\" × 48\" 2\" × 12\" Edges rectified rectified Technical Wear Rating Group 4 4 Break Strength > 400 > 400 Water Absorption % < 0.5 < 0.5 Pre-Consumer Recycled Content 31% 31% Post-Consumer Recycled Content 9% 9% DCOF > 0.42 > 0.42 Shade Variation V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 152 Titanium 267 Iron 571 Steel 750 Lithium 751 Copper 190TS Herringbone Mosaic * Herringbone pattern is created by using an A and B piece. If you order 190TS, the A & B come packaged as a set. 1.88 sq. ft. coverage per sheet. 152 Titanium 267 Iron 571 Steel 750 Lithium 751 Copper MADE IN THE USA 42 BACK TO TABLE OF CONTENTS

TILE & STONE GENESIS porcelain 125 Ivory 150 Grey 750 Taupe 43 BACK TO TABLE OF CONTENTS

GENESIS TILE & STONE Style Number CS25V CS24V CS23V CS30V CS29V Construction porcelain porcelain porcelain porcelain porcelain Tile Type floor tile floor tile floor tile surface bullnose mosaic Tile Size 12\" × 24\" 18\" × 18\" 13\" × 13\" 2.75\" × 13\" 13\" × 13\" Technical Wear Rating Group 4 4 4 N/A N/A Break Strength 337 337 292 N/A N/A Water Absorption % < 0.30 < 0.30 < 0.30 N/A N/A DCOF > 0.42 > 0.42 > 0.42 N/A N/A Shade Variation V3 V3 V3 V3 V3 Installation Area Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Floors, Walls, Exteriors Exteriors Exteriors Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors CS29V mosaic 125 Ivory 150 Grey 750 Taupe 125 Ivory 150 Grey 750 Taupe CS27V listello #1 CS28V listello #2 125 Ivory 150 Grey 750 Taupe 125 Ivory 150 Grey 750 Taupe 44 BACK TO TABLE OF CONTENTS

TILE & STONE GLEE porcelain 100 Bianco 700 Noce 500 Gray | CS63V Chevron 45 BACK TO TABLE OF CONTENTS

GLEE TILE & STONE Style Number CS62V CS63V Construction porcelain porcelain Tile Type floor tile floor tile Tile Size 8.5\" × 40\" 6\" × 20\" chevron Technical Wear Rating Group 4 4 Break Strength > 250 > 250 Water Absorption % 0.1 0.1 DCOF >0.42 >0.42 Shade Variation V3 V3 Installation Area Floors, Walls, Exteriors Floors, Walls, Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Bianco 500 Gray 700 Noce CS63V 100 Bianco 500 Gray 700 Noce MADE IN THE USA 46 BACK TO TABLE OF CONTENTS

TILE & STONE GRAND STRANDS porcelain | ceramic 400 Indigo 100 Gossamer 900 Corduroy 570 Flax 170 Chenille 200 Poplin 500 Twill 47 BACK TO TABLE OF CONTENTS

GRAND STRANDS TILE & STONE Style Number CS84W CS85W CS69X CS70X CS68X Construction porcelain glossy ceramic porcelain glossy ceramic porcelain made in USA made in Italy made in USA made in Italy made in USA Tile Type floor wall SBN WBN mosaic Tile Size 12\" × 24\" 4\" × 12\" 2.75\" × 12\" 4\" × 12\" 12\" × 12\" × 2\" Technical Wear Rating Group 4 N/A 4 N/A 4 Break Strength > 250 > 250 > 250 > 250 > 250 Water Absorption % < 0.5 16 < 0.5 < 0.5 < 0.5 Pre-consumer 31% N/A 31% N/A 31% Recycled Content Post-consumer 9% N/A 9% N/A 9% Recycled Content DCOF > 0.42 N/A > 0.42 N/A > 0.42 Shade Variation V1 V1 V1 V1 V1 Installation Area Floors, Walls, Walls Floors, Walls, Walls Floors, Walls, Exteriors Exteriors Exteriors A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 100 Gossamer 170 Chenille 200 Poplin 400 Indigo (Wall & WBN Only) 500 Twill 570 Flax 900 Corduroy MADE IN THE USA 48 BACK TO TABLE OF CONTENTS

TILE & STONE HARVEST glazed porcelain 600 Rye 700 Barley 200 Oat 500 Malt 750 Wheat 49 BACK TO TABLE OF CONTENTS

HARVEST TILE & STONE Style Number 199TS Construction glazed porcelain Tile Type floor tile Tile Size 6\" × 36\" Technical Wear Rating Group Multiple* Break Strength > 425 Water Absorption % < 0.5 Pre-consumer 40% Recycled Content DCOF > 0.42 Shade Variation V3 Installation Area Floors, Walls, Exteriors * color 200 – 4; all other colors – 3. Wear rating 3 not suggested for exterior floor applications. A DCOF value of > 0.42 is the new standard for tiles specified for commercial application in standard A137.1-2012, Section 9.6. It replaces the SCOF value of > 0.60 referenced in ASTM C1028. For more information on the correlation between the two values and about the DCOF AcuTest visit the Tile Council of North America’s website: www.tcnatile.com MANUFACTURER’S WARNING: - Tiles with DCOF AcuTest values less than 0.42 are not recommended for use in areas with wet or slippery conditions. If such tiles are used as a walking surface where water, ice, oil, grease and/or other substances are present, such a condition could cause a reduction in foot traction and become unexpectedly slippery resulting in a fall and personal injury. See ANSI standard A137.1 section 6.2.2.1.10, available at www.tcnatile.com/sections6.2.2.1.10.html. - Water, oil, grease, etc. create slippery conditions. Floor applications with exposure to these conditions require extra caution in product selection. Not for use on ramps. - Since there is a shade variation on all natural products, the tile and trim supplied for your particular installation may not match these samples. Final selection should be made from actual tiles and trim and not from tile and trim samples or color reproductions. Manufactured in accordance with ANSI A137.1 standards. Colors 200 Oat 500 Malt* 600 Rye* 700 Barley* 750 Wheat* MADE IN THE USA 50 BACK TO TABLE OF CONTENTS