MerlinCAT

Distributed by Merlin Tools Cutting Tool Range MER/CT/01/14 Merlin Tools Limited, Unit 21 North Road, Charnwood Business Park, Loughborough, Leicestershire LE11 1LE Tel: +44 (0)1509 610300 Fax: +44 (0)1509 610400 MER/CT/01/14 Email: [email protected] www.merlintools.co.uk Cover4pp.indd 1 20/01/2014 16:35

Quality • Precision • Performance Our Service Design Our tools are designed using CAD then exported to 3D simulation software for virtual testing of the grinding process. Each grinding operation is highlighted in a different colour to give a full 3D representation of the tool. When the virtual model is perfected physical prototypes are ground to perfect the tool prior to full production Raw Material All of our tools are manufactured using the highest quality raw materials with 90% tungsten and 10% cobalt micro-grain K30. The raw material passes through a centreless grinding system to ensure an exacting tolerance of h6. Manufacture The Production System operates utilising simulators and measuring and grinding equipment to ensure our tools remain consistent across differing batch dates. The process starts with cyber grinding in a virtual environment before a test machine grinding is performed, once the stringent parameters are met full production is initiated. Inspection and Quality Continuous batch testing on all the tools is performed using state of the art measurement diagnostics machines ensuring incredibly tight tolerances and products of the highest quality. A final manual inspection is performed during cleaning to ensure our tools are 100% quality controlled Despatch We carry an extensive range of tools in stock ensuring a fast turn around on all orders with same day despatch on all standard products. Our Tools go through a final visual inspection before being carefully packed and despatched. If you have any question regarding the production of our products please do not hesitate to call the team at Merlin Tools.

Merlin Tools is committed to providing our customers with a cost effective solution to their cutting tool requirements. In addition to our extensive range of tools we offer a comprehensive regrind, recoating and modification service. Call our sales team to discuss your requirements. 01509 610300 Below are some visual aids to assist you with the understanding and navigation of this catalogue. Technical information for a tool can be found on the page indicated 219 Slotting, Edge pitch Side cut, angle Plunging Plunging Helix angle only ALU Plunging Pitch Ripper and Side cut finish COARSE Slotting & Shank type Side cut 120º FLAT FINE Side Cut Incident only 118º point angle PLAIN 90º 2 Corner MG Material radius & 120º Tolerance HM International Flutes DIN Specification 3 850 D N 135º Coating Coolant TiALN 4 130º Ø>25 Non Centre 5 Cutting 6

Specials, Regrinds and Modification At Merlin Tools we pride ourselves on understanding the needs of our clients. We know you expect quality and precision not only from our impressive range of ex stock tooling but also when you need something special. Merlin Tools provides a full service capability that is dedicated to providing you with the highest quality in precision manufactured cutting tools to meet the most demanding requirements. Our bespoke tool manufacturing service builds on this reputation and provides you with the exacting precision performance tool tailored for your specific needs. Tool Design, Simulation and Manufacture The tool development process in many The CAD simulation is a full 3 dimensional image of the tool that ways is straight forward. The careful and can be rotated and positioned in a virtual spatial environment precise interpretation of the component for client approval. It is fully colour coded for simple designation profile is transferred to CAD where of depth and cutting angles. Working closely with our clients, we adjustments can be more easily applied. refine the design of the tool prior to manufacture. Our knowledge of materials, machining speeds and tolerances are used to calculate a precise cutting profile ready to be transposed into full CAD simulation. Our CNC manufacturing equipment is state of the art. These machines calibrate perfectly with our CAD software to produce flawless precision grinding. The fully automated system can run 24/7 producing quantities of high quality, consistently accurate tools to your specification at highly competitive prices. manufactured 4 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Specials, Regrinds and Modification Tool Inspection Full inspection takes place at key stages in the production process. Careful assessment of the tool, both through state- of-the art automated inspection and traditional craftsman analysis, ensure that the level of precision we have come to be recognised for is achieved every time. FromDrawing to Tool Modification of Standard Stock Tools Merlin Tools will modify one of our Radius modification existing stock tools to fit the job, Chamfer modification if it’s appropriate to do so, saving on the cost of our full design and Steps added to standard drills manufacture service. Profiles added to standard drills Call or email our technical team Diameter modifications who will be happy to discuss your Shank reduction options with you. Neck Relief A full coating service is available to all modified tools. A Full Tool Rescue Service Our special Tool Rescue service offers the opportunity for us to A Tool Rescue box is available upon request. Whenever you need Regrind, Recondition and Repair your existing tools. This service to use the service give our sales team a call and we will arrange will breath new life into those tools that have worked so hard for courier collection of your Tool Box for delivery to our technical you and produce a cost effective machining solution, returning department. tools to you as new. Original coating can be re-applied to tools on request. manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 5

PAGE Solid Carbide Endmills 21 Bright Finish, TiALN Coated and Corner Radius PAGE Solid Carbide Aluminium, 69 Ultra-High Performance and Corner Radius Quality • Precision • Performance PAGE PCD & CVD Coated 119 Crystalline Diamond Product Range Cutting Tools Index PAGE Powder Metal ASP52 129 HSSE 8% Cobalt PAGE Solid Carbide Drills & 157 Application Tooling PAGE Solid Carbide Thread Mills 193 & Machine Taps HSSE & Powder Metal ASP2023 PAGE Tungsten Carbide Burrs 211 Standard, Double, Aluminium Cut TiALN Coated and Sets PAGE ER Collets & Chucks 225 Toolholders & Accessories PAGE Technical Information 259

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Endmills Bright Finish TiALN and Corner Radius 2 Flute 211 22 • • • • • • Standard Length 2 Flute 214 22 • • • • • • • Standard Length TiALN 3 Flute 311 23 • • • • • • Standard Length 3 Flute 314 23 • • • • • • • Standard Length TiALN 4 Flute 411 24 • • • • • • Standard Length 4 Flute 414 24 • • • • • • • Standard Length TiALN 2 Flute 211 25 • • • • • • Standard Length Imperial 2 Flute 214 25 • • • • • • • Standard Length Imperial TiALN 3 Flute 311 26 • • • • • • Standard Length Imperial 3 Flute 314 26 • • • • • • • Standard Length Imperial TiALN 4 Flute 411 27 • • • • • • Standard Length Imperial 4 Flute 414 27 • • • • • • • Standard Length Imperial TiALN 2 Flute Corner Radius 214R 28 • • • • • • • Standard Length TiALN 3 Flute Corner Radius 314R 29 • • • • • • • Standard Length TiALN 4 Flute Corner Radius 414R 30 • • • • • • • Standard Length TiALN 2 Flute Corner Radius 740R 31 • • • • • • • Long Length TiALN 4 Flute Corner Radius 745R 32 • • • • • • • Long Length TiALN 2 Flute Corner Radius 750R 33 • • • • • • • Long Length - Neck Relief TiALN 4 Flute Corner Radius 755R 34 • • • • • • • Long Length - Neck Relief TiALN 2 Flute Ball Nosed 216 35 • • • • • • Standard Length 2 Flute Ball Nosed 219 35 • • • • • • • Standard Length TiALN 3 Flute Ball Nosed 316 36 • • • • • • Standard Length 3 Flute Ball Nosed 319 36 • • • • • • • Standard Length TiALN 4 Flute Ball Nosed 416 37 • • • • • • Standard Length 4 Flute Ball Nosed 419 37 • • • • • • • Standard Length TiALN 2 Flute Ball Nosed 216 38 • • • • • • Standard Length Imperial 2 Flute Ball Nosed 219 38 • • • • • • • Standard Length Imperial TiALN 3 Flute Ball Nosed 316 39 • • • • • • Standard Length Imperial Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 7

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Endmills Bright Finish TiALN and Corner Radius 3 Flute Ball Nosed 319 39 • • • • • • • Standard Length Imperial TiALN 4 Flute Ball Nosed 416 40 • • • • • • Standard Length Imperial 4 Flute Ball Nosed 419 40 • • • • • • • Standard Length Imperial TiALN 2 Flute 211S 41 • • • • • • Stub Length 2 Flute 214S 41 • • • • • • • Stub Length TiALN 3 Flute 311S 42 • • • • • • Stub Length 3 Flute 314S 42 • • • • • • • Stub Length TiALN 4 Flute 411S 43 • • • • • • Stub Length 4 Flute 414S 43 • • • • • • • Stub Length TiALN 2 Flute Ball Nosed 216S 44 • • • • • • Stub Length 2 Flute Ball Nosed 219S 44 • • • • • • • Stub Length TiALN 3 Flute Ball Nosed 316S 45 • • • • • • Stub Length 3 Flute Ball Nosed 319S 45 • • • • • • • Stub Length TiALN 4 Flute Ball Nosed 416S 46 • • • • • • Stub Length 4 Flute Ball Nosed 419S 46 • • • • • • • Stub Length TiALN 2 Flute Double Ended 251 47 • • • • • • Stub Length 2 Flute Double Ended 259 47 • • • • • • • Stub Length TiALN 3 Flute Double Ended 351 48 • • • • • • Stub Length 3 Flute Double Ended 359 48 • • • • • • • Stub Length TiALN 4 Flute Double Ended 451 49 • • • • • • Stub Length 4 Flute Double Ended 459 49 • • • • • • • Stub Length TiALN 2 Flute Double Ended 251 50 • • • • • • Stub Length Imperial 4 Flute Double Ended 451 50 • • • • • • Stub Length Imperial 2 Flute Double Ended - Ball Nosed 261 51 • • • • • • Stub Length 2 Flute Double Ended - Ball Nosed 269 51 • • • • • • • Stub Length TiALN 3 Flute Double Ended - Ball Nosed 361 52 • • • • • • Stub Length 3 Flute Double Ended - Ball Nosed 369 52 • • • • • • • Stub Length TiALN 4 Flute Double Ended - Ball Nosed 461 53 • • • • • • Stub Length 8 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Endmills Bright Finish TiALN and Corner Radius 4 Flute Double Ended - Ball Nosed 469 53 • • • • • • • Stub Length TiALN 2 Flute 221 54 • • • • • • Long Length 2 Flute 229 54 • • • • • • • Long Length TiALN 3 Flute 321 55 • • • • • • Long Length 3 Flute 329 55 • • • • • • • Long Length TiALN 4 Flute 421 56 • • • • • • Long Length 4 Flute 429 56 • • • • • • • Long Length TiALN 2 Flute 221 57 • • • • • • Long Length Imperial 2 Flute 229 57 • • • • • • • Long Length Imperial TiALN 4 Flute 421 58 • • • • • • Long Length Imperial 4 Flute 429 58 • • • • • • • Long Length Imperial TiALN 2 Flute Ball Nosed 236 59 Long Length • • • • • • 2 Flute Ball Nosed 239 59 • • • • • • • Long Length TiALN 3 Flute Ball Nosed 336 60 • • • • • • Long Length 3 Flute Ball Nosed 339 60 • • • • • • • Long Length TiALN 4 Flute Ball Nosed 436 61 • • • • • • Long Length 4 Flute Ball Nosed 439 61 • • • • • • • Long Length TiALN 2 Flute Ball Nosed 236 62 • • • • • • Long Length Imperial 2 Flute Ball Nosed 239 62 • • • • • • • Long Length Imperial TiALN 4 Flute Ball Nosed 436 63 Long Length Imperial • • • • • • 4 Flute Ball Nosed 439 63 • • • • • • • Long Length Imperial TiALN 2 Flute 222 64 • • • • • • Extra Long Length 2 Flute 299 64 • • • • • • • Extra Long Length TiALN 4 Flute 444 65 • • • • • • Extra Long Length 4 Flute 499 65 • • • • • • • Extra Long Length TiALN 2 Flute Ball Nosed 226 66 • • • • • • Extra Long Length 2 Flute Ball Nosed 229 66 • • • • • • • Extra Long Length TiALN 4 Flute Ball Nosed 446 67 • • • • • • Extra Long Length 4 Flute Ball Nosed 449 67 • • • • • • • Extra Long Length TiALN Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 9

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Aluminium, Ultra-High Performance and Corner Radius Range. 3 Flute 60º Hi-Helix 650 70 • • • Standard Length 3 Flute 60º Hi-Helix 659 70 • • • Standard Length TiALN 5 Flute 45º Helix Standard Length 520 71 • • • • 5 Flute 45º Helix 525 71 • • • • • Standard Length TiALN 6 Flute 30º Helix 660 72 • • • • Standard Length 6 Flute 30º Helix Standard Length TiALN 665 72 • • • • • 2 Flute 15º Helix Pocket Mill 670 73 • • • • • • Ball Nosed Long Length 2 Flute 15º Helix Pocket Mill 675 73 • • • • • • • Ball Nosed Long Length TiALN 3 Flute Roughing Mill Standard Length 530 74 • • • • • • 3 Flute Roughing Mill 539 74 Standard Length TiALN • • • • • • 4 Flute Roughing Mill 600 75 • • • • Standard Length 4 Flute Roughing Mill Standard Length TiALN 609 75 • • • • • 3 Flute Roughing Mill for Aluminium 603 76 Standard Length • • • • • • 3 Flute Roughing Mill for Aluminium 699 76 • • • • • • Standard Length ZrN 2 Flute 55º Helix for Aluminium Standard Length 254 77 • 3 Flute 55º Helix for Aluminium 356 77 Standard Length • 3 Flute 55º Helix for Aluminium 357 78 • Long Length 2 Flute 40° Helix for Aluminium 255 79 • Long Reach 2 Flute 40° Helix for Aluminium Extra Long Reach 255XL 79 • 2 Flute 50° Helix for Aluminium 256 80 • Long Reduced Shank 3 Flute 40º Helix for Aluminium 355 80 • Long Reach 2 Flute 40º Helix for Aluminium • Long Reach with Coolant 255C 81 2 Flute 40º Helix for Aluminium 255WL 81 • Long Reach Non Waterline 2 Flute 55º Helix for Aluminium 260 82 • Ball Nosed Standard Length 2 Flute 50º Helix for Aluminium Ball Nosed Long Reach 257 82 • 2 Flute 50º Helix for Aluminium 257XL 83 • Ball Nosed Extra Long Reach 2 Flute 50º Helix for Aluminium 258 83 • Ball Nosed Long Reach Reduced Shank 10 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Aluminium, Ultra-High Performance and Corner Radius Range. 2 Flute 55º Helix for Aluminium 254R 84 • Corner Radius Standard Length 3 Flute 55° for Aluminium Corner Radius Standard Length 356R 85 • 3 Flute 55º for Aluminium 357R 86 • Corner Radius Long Length 2 Flute 40° Helix for Aluminium 255R 87 • Corner Radius Long Reach 2 Flute 45º Hi-Helix for Aluminium Standard Length 625 88 • 2 Flute 40º Ali-Carb for Aluminium 253 88 Standard Length • Single Flute 30º Helix for Aluminium & 153 89 • Plastics Reinforced Shank Standard lgth Single Flute 30º Helix for Aluminium & Plastics Stub Length 154 89 • Single Flute 30º Helix for Aluminium & 155 90 Plastics Long Length • Single Flute 45º Helix for Aluminium & 151 91 • Plastics Standard Length Single Flute 45º Helix for Aluminium & Plastics Stub Length 152 91 • 2 Flute Straight Flute Cutters 271 92 • for Plastics 8 - 8.3 4 Flute Straight Flute Cutters 471 92 • for Plastics 8 - 8.3 2 Flute Straight Flute Cutters 279 92 • for Plastics TiALN 8 - 8.3 4 Flute Straight Flute Cutters • for Plastics TiALN 479 92 8 - 8.3 V4 35º/38º Variable Helix 691 93 • • • • • • Standard Length TiALN V4 35º/38º Variable Helix 692 93 • • • • • • Long Length TiALN V4 35º/38º Variable Helix Corner Radius Standard Length TiALN 691R 94 • • • • • • V4 35º/38º Variable Helix Corner Radius 601R 95 • • • • • • Long Length TiALN V4 35º/38º Variable Helix Corner Radius Standard Length TiALN 691R 96 • • • • • • V4 35º/38º Variable Helix Corner Radius Long Length TiALN 692R 96 • • • • • • V4 35º/38º Variable Helix Ball Nosed 693 97 • • • • • • Standard Length TiALN V4 35º/38º Variable Helix Ball Nosed 694 97 • • • • • • Long Length TiALN V4 35º/38º Variable Helix Ball Nosed Long Length TiALN 602 98 • • • • • • V4 35º/38º Variable Helix 695 99 • • • • • • Standard Length Imperial TiALN V4 35º/38º Variable Helix 696 99 • • • • • • Long Length Imperial TiALN V4 35º/38º Variable Helix Corner Radius Standard Length Imperial TiALN 695R 100 • • • • • • Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 11

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Aluminium, Ultra-High Performance and Corner Radius Range. V4 35º/38º Variable Helix Corner Radius 696R Long Length Imperial TiALN 100 • • • • • • V4 35º/38º Variable Helix Ball Nosed 697 101 • • • • • • Standard Length Imperial TiALN V4 35º/38º Variable Helix Ball Nosed 698 101 • • • • • • Long Length Imperial TiALN V5 34º/37º Variable Helix Long Length 505 for Dry Cutting or Misting nAco 102 • • • • • • V5 34º/37º Variable Helix Corner Radius 505R 103 • • • • • • Long for Dry Cutting or Misting nAco V6 33º/35º Variable Helix, Long Length 605 104 • • • • • • for Dry Cutting or Misting nAco V6 33º/35º Variable Helix Corner Radius 605R Long for Dry Cutting or Misting nAco 104 • • • • • • 2 Flute 30º Helix Ball Nosed 671 105 • • • • • • for Dry Cutting or Misting nAco 2 Flute 30º Helix Ball Nosed Long Length 672 for Dry Cutting or Misting nAco 105 • • • • • • Multi-flute 50º Helix 680 106 • • • • • • TiALN Multi-Flute 50º Corner Radius 610R 106 • • • • • • Standard Length TiALN Multi-Flute 50º Corner Radius 620R Long Length TiALN 107 • • • • • • 4 Flute 50º Helix 690 107 • • • • • • Power Mill. TiALN 2 Flute 30º Helix Mini Mill 200 108 • • • • • • 2 Flute 30º Helix Mini Mill 204 TiALN 108 • • • • • • • 4 Flute 30º Helix Mini Mill 400 109 • • • • • • 4 Flute 30º Helix Mini Mill 404 109 • • • • • • • TiALN 2 Flute 30º Helix Neck Relief 700 110 Long Length TiALN • • • • • • • 4 Flute 30º Helix Long Neck 705 111 • • • • • • • Short Length TiALN 2 Flute 30º Helix Ball Nosed 710 111 • • • • • • • TiALN 2 Flute 30º Helix Ball Nosed 720 Pencil Neck TiALN 112 • • • • • • • 2 Flute 30º Helix Ball Nosed 715 113 • • • • • • • Neck Relief Long Reach TiALN 2 Flute 30º Helix Neck relief 730R 114 Corner Radius Long Reach TiALN • • • • • • • 2 Flute 30º Helix Ball Nosed 206 115 • • • • • • Mini Mill 2 Flute 30º Helix Ball Nosed 209 115 • • • • • • • Mini Mill TiALN 4 Flute 30º Helix Ball Nosed 406 Mini Mill 116 • • • • • • 4 Flute 30º Helix Ball Nosed 409 116 • • • • • • • Mini Mill TiALN 4 Flute 30º Right Hand Helix 220º 722 117 Ball Nosed TiALN • • • • • • • 2 Flute 30º Helix Ball Nosed 725 118 • • • • • • • TiALN 12 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

index Fibreglass Graphite Composite Metal Matrix Carbon Fibre Plastics Carbon & Honeycombe Description Series Page PCD & CVD Coated Crystalline Diamond Cutting Tools 2 Flute PCD Corner Radius 800 120 • • • • • for Graphite and Metal Matrix 2 Flute PCD Corner Radius 801 120 • • • • • Extra Long for Graphite & Metal Matrix 2 Flute PCD Ball Nosed 802 121 • • • • • for Graphite and Metal Matrix 2 Flute PCD Ball Nosed 803 121 • • • • • Extra Long for Graphite & Metal Matrix 2 Flute 30º Helix CVD for Graphite 804 122 • • • • • • • Long Length 2 Flute 30º Helix CVD for Graphite 805 122 • • • • • • • Long Length Corner Radius 2 Flute 30º Helix CVD for Graphite 806 123 • • • • • • • 4 Flute 30º Helix CVD for Graphite 807 123 • • • • • • • Long Length Ball Nosed 2 Flute 30º Helix CVD for Graphite 809 124 • • • • • • • Long Length Ball Nosed 2 Flute 30º Helix CVD for Graphite 810 124 • • • • • • • Ball Nosed Multi-Flute Router Diamond Cut FG 125 • • • • Metric Multi-Flute Router Diamond Cut FG 125 • • • • Imperial Multi-Flute CVD Router 811 126 • • • • • • Fine Pitch Nicked Imperial Multi-Flute CVD Router 815 126 • • • Herringbone Surface Finisher Imperial Multi-Flute CVD Roughing Router 816 127 • • • • Composite Semi Finishing Imperial Multi-Flute CVD Finishing Router 817 127 • • • • Composite High Accuracy Finishing Imp P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Powder Metal ASP52 TiALN 2 Flute Standard Length 6420 130 • • • • 3 Flute 45º Helix Standard Length 6430 130 • • 3 Flute Standard Length 6439 131 • • 4 Flute 55º Helix Standard Length 6604 131 • • • 3 Flute Fine Pitch Roughers 6444 132 • • Standard Length Multi-flute Fine Pitch Square End 6647 132 • Roughers Standard Length Multi-flute Standard Length 6600 133 • • • • • Multi-flute Long Length 6606 133 • • • • • Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 13

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Powder Metal ASP52 TiALN Multi-Flute 30º/40º Variable Helix 6666 134 • • • • Standard Length Finishing Multi-Flute Fine Pitch Roughers 6644 135 • • • Standard Length Multi-Flute Fine Pitch Roughers 6696 135 • • • Long Length HSSE 8% Cobalt 2 Flute Standard Length 4420 136 • • • 2 Flute Standard Length 4420 136 • • • TiALN 2 Flute Long Length 4426 137 • • • 2 Flute Long Length 4426 137 • • • TiALN 2 Flute Ball Nosed 4422 138 • • Standard Length 2 Flute Ball Nosed 4422 138 • • Standard Length TiALN 2 Flute Ball Nosed 4470 139 • • Long Length 2 Flute Ball Nosed 4470 139 • • Long Length TiALN 3 Flute Standard Length 4439 140 • • • • 3 Flute Standard Length 4439 140 • • • • TiALN 3 Flute Standard Length FC3 4435 141 • • Throw away 10 Piece Set Standard Length FC3 4435 141 • • Throw away 3 Flute 45º Helix Regular Length 4430 142 • • 3 Flute 45º Helix Regular Length 4430 142 • • TiALN 3 Flute 45º Helix Long Length 4432 143 • • 3 Flute 45º Helix Long Length 4432 143 • • TiALN 3 Flute 40º Helix Coarse Roughers 4447 144 • • Regular length 3 Flute 40º Helix Coarse Roughers 4497 144 • • Long length Multi-Flute Regular Length 4600 145 • • • Multi-Flute Regular Length 4600 145 • • • TiALN Multi-Flute Long Length 4606 146 • • • Multi-Flute Long Length 4606 146 • • • TiALN Multi-Flute Fine Roughers 4644 147 • • • • Standard Length Multi-Flute Fine Roughers 4644 147 • • • • Standard Length TiALN 14 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet HSSE 8% Cobalt Multi-Flute Fine Roughers 4696 148 • • • • Long Length Multi-Flute Fine Roughers 4696 148 • • • Long Length TiALN • Multi-Flute Coarse Roughers 4640 149 • • • Standard Length Multi-Flute Coarse Roughers 4640 149 • • • Standard Length TiALN Multi-Flute Coarse Roughers 4690 150 • • • Long Length Multi-Flute Coarse Roughers 4690 150 • • • Long Length TiALN Multi-Flute, 45°& 60° Dovetail Cutters 4330 151 • • • • • • • Standard Length Multi-Flute, 45°& 60° Dovetail Cutters 4330 151 • • • • • • • Standard Length TiALN Multi-Flute, 10° T-Slot Cutters 4800 152 • • • • • Standard Length Multi-Flute, 10° T-slot Cutters 4800 152 • • • • • Standard Length TiALN Multi-Flute, T-slot Roughing Cutters 4802 153 • • • • • Standard Length Multi-Flute, T-slot Roughing Cutters 4802 153 • • • • • Standard Length TiALN Multi-Flute Woodruff Cutters 4834 154 • • • • • Standard Length Multi-Flute Woodruff Cutters 4834 155 • • • • • Regular Length TiALN Multi-Flute, Corner Rounding Cutters, 5080 156 • • • • • • • Regular Length Multi-Flute, Corner Rounding Cutters, 5080 156 Regular Length TiALN • • • • • • • Solid Carbide Drills & Application Tooling Centre Drill Imperial 106 158 • • • • • 60º Included Point Angle Centre Drill Metric 60º Included Point Angle 107 158 • • • • • 2 flute Drill Mill 90º Included Angle 288 159 • • • • • 4 flute Drill Mill 90º Included Angle 488 159 • • • • • 2 flute Drill Mill TiALN 90º Included Angle 289 159 • • • • • 4 flute Drill Mill TiALN 90º Included Angle 489 159 • • • • • General Purpose Engraving tool 30º, 60º or 90º Inclusive 001 160 • • • • • General Purpose Engraving Tool With Flat 60º Inclusive 002 160 • • • • • Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 15

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Drills & Application Tooling 4 Flute Straight Flute Reamer 108 161 • • • • • • Right-Hand cutting 162 4 & 6 Flute Straight Flute Reamer 108 163 • • • • • • Right-Hand Cutting 6 Flute Straight Flute Reamer Right-Hand Cutting 108 164 • • • • • • Single Point Boring Tool 101 165 • • • • • Bore Depth from 1/2” to 1 1/2” 118º Spade Drill 111 165 • • • • 30º Helix Spotting Drill 109 166 90º & 120º Point 110 • • • • • 30º Helix Spotting Drill 199 90º & 120º Point TiALN 119 166 • • • • • • 4 Flute 90º Run out 112 167 • • • • • Corner Rounding 4 Flute 90º Run out 122 167 • • • • • • Corner Rounding TiALN 4 Flute 90º Run Out 112M 168 Miniature Corner Rounding • • • • • 4 Flute 90º Run out 122M 168 • • • • • • Miniature Corner Rounding TiALN 4 Flute Chamfer Tool 113 169 • • • • • 4 Flute Chamfer Tool TiALN 114 169 • • • • • • 1, 3, 6 Flute Countersink 60º, 82º, 90º Included Point Angle C 170 • • • • • 4 Flute Back Chamfer & Countersink 140 171 • • • • • 90º Angle 4 Flute Back Chamfer & Countersink 149 171 • • • • • 90º Angle TiALN 3xD Drill 30º Helix 123 172 • • • • • • Without Coolant TiALN 3xD Drill 30º Helix With Coolant TiALN 133 173 • • • • • • 5xD Drill 30º Helix 125 174 • • • • • • Without Coolant TiALN 5xD Drill 30º Helix 135 175 • • • • • • With Coolant TiALN 8xD Drill 30º Helix 138 176 • • • • • • With Coolant TiALN Jobber Drill 25º Helix Imperial 118º Four Facet Point 102 177 • • • • • Jobber Drill 27º Helix Metric 103 178 • • • • • 118º Four Facet Point Stub Length Drill 27º Helix Imperial 202 179 • • • • • 118º Four Facet Point Stub Length Drill 25º Helix Metric 203 180 • • • • • 118º Four Facet Point Slow Spiral Drill 15º Helix Metric 135º Point 104 181 • • • • 2 Flute Straight Flute Drill 201 182 • • • • • Metric & Imperial 140º Point 183 3 Flute Drill 30º Helix Metric 105 184 • 130º Point Self Centering • • 6.1-6.3 • • 7.1-8.2 Solid Carbide Rod h6 R 185 Standard & Long Length 16 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Solid Carbide Drills & Application Tooling Straight Shank Reamer 10º Helix 2060 186 • • • • • • • HSSE 5% Straight Shank Reamer 10º Helix HSSE 5% TiALN 2060 187 • • • • • • • Straight Shank Reamer 45º Helix HSSE 5% 2064 188 • • • • • • • Straight Shank Reamer 45º Helix 2064 188 • • • • • • • HSSE 5% TiALN HSS Multi-Flute 60º Countersink 2550 189 • • • • • • • Regular Length 90º Countersink 2572 190 • • • • • • • 90º Countersink 2573 190 • • • • • • • 3 Flute HSS 90º Countersink 2575 191 • • • • • • • Regular Length HSS Multi-Flute Countersink 120º 2580 191 • • • • • • • Regular Length Solid Carbide Thread Mills & Machine Taps HSSE & ASP2023 Thread Mill 15º Spiral Flute AITiN NPT 920 194 • • • • • • Thread Mill 15º Spiral Flute AITiN NPTF 930 194 • • • • • • Thread Mill 15º Spiral Flute AITiN MF 960 195 • • • • • • Thread Mill 15º Spiral Flute AITiN M 970 195 • • • • • • Thread Mill 15º Spiral Flute AITiN UNF 940 196 • • • • • • Thread Mill 15º Spiral Flute AITiN UNC 950 196 • • • • • • Spiral Point Metric HSSE (M35) 8110 197 • • • Spiral Flute Metric HSSE (M35) 8120 197 • • • Fluteless Metric HSSE (M35) TiCN 8130 198 Forming Taps for materials with Elongation >12% Fluteless Metric HSSE (M35) TiCN 8140 198 Spiral Point Metric 8150 199 • • • HSSE (M35) FINE Spiral Flute Metric 8160 199 HSSE (M35) FINE • • • Spiral Point UNC HSSE (M35) 8170 200 • • • Spiral Flute UNC HSSE (M35) 8180 200 • • • Spiral Point UNF HSSE (M35) 8190 201 • • • Spiral Flute UNF HSSE (M35) 8200 201 • • • Spiral Point G 8210 202 • • • HSSE (M35) Spiral Flute G 8220 202 • • • HSSE (M35) Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 17

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Machine Taps HSSE & ASP2023 Straight Flute BSPT 8230 203 • • • HSSE (M35) Straight Flute NPT 8240 203 • • • HSSE (M35) Spiral Point Metric HSSEX (ASP2023) VAP 9110 204 • • • Spiral Flute Metric HSSEX (ASP2023) VAP 9120 204 • • • Spiral Point Metric HSSE (ASP2023) 9130 205 • • Spiral Flute Metric HSSEX (ASP2023) 9140 205 • • Spiral Point Metric HSSEX (ASP2023) TiALN 9150 206 • • • Spiral Flute Metric HSSEX (ASP2023) TiALN 9160 206 • • • Straight Flute Metric HSSE (M35) NIT 9170 207 • Straight Flute Metric HSSE (M35) TiCN 9180 207 • Straight Flute Metric HSSE (M35) 9190 208 • Spiral Point Metric HSSE (M35) 9200 209 • Spiral Flute Metric HSSE (M35) 9210 209 • Spiral Point Metric HSSE (M35) CrN 9220 210 • Spiral Flute Metric HSSE (M35) CrN 9230 210 • Tungsten Carbide Burrs Cylinder - No End Cut, Standard Double and Double-TiALN Cut A 212 • • • • • Cylinder - End Cut, Standard B 212 • • • • • Double and Double-TiALN Cut Cone - Standard, Double and M 213 • • • • • Double-TiALN Cut Ball Nosed Cylinder - Standard, Double and Double-TiALN Cut C 213 • • • • • Ball Nosed Cone - Standard, Double L 214 • • • • • and Double-TiALN Cut Oval - Standard, Double and E 214 • • • • • Double-TiALN Cut Tree - Standard, Double and Double-TiALN Cut G 215 • • • • • Ball - Standard, Double and D 215 Double-TiALN Cut • • • • • Ball Nosed Tree - Standard, Double F 216 • • • • • and Double-TiALN Cut Flame - Standard, Double and Double-TiALN Cut H 216 • • • • • 18 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

index P M N S K H Stainless Steel Aluminium & Non Ferrous Titainum & Heat Resistant Alloys Hardened Steel Description Series Page Steel Cast Iron Cermet Tungsten Carbide Burrs Countersink - Standard Cut J 217 • • • • • Inverted cone - No End Cut Standard, Double and Double-TiALN Cut N 217 • • • • • Ball Nosed Cylinder for Aluminium C 218 • Ball for Aluminium D 218 • Ball Nosed Cone for Aluminium L 218 • Ball Nosed Tree for Aluminium F 219 • Cylinder End Cut for Aluminium B 219 • Cylinder No End Cut for Aluminium A 219 • Extra long - Standard & Double Cut Burrs All shapes XL 219 • • • • • Tyre Burrs TB 220 5 piece Burr Set - Double Cut & Double cut TiALN MB 221 • • • • • 10 piece Burr Set - Double Cut & Double cut TiALN MB 222 • • • • • 5 piece Burr Set for Aluminium MB 223 • Miniature Burrs - 10 piece set Double Cut MB 223 • • • • • ER Collets & Chucks Toolholders & Accessories ER Collets DIN 6499-B ER 8 Collets ER 25 Collets General, High & Top Accuracy ER 8 226 General, High & Top Accuracy ER 25 230 ER 11 Collets ER 32 Collets General, High & Top Accuracy ER 11 227 General, High & Top Accuracy ER 32 231 ER 16 Collets ER 40 Collets General, High & Top Accuracy ER 16 228 General, High & Top Accuracy ER 40 232 ER 20 Collets ER 50 Collets General, High & Top Accuracy ER 20 229 General, High & Top Accuracy ER 50 233 ER Collet Sets ER 8 - 9 Piece Set ER8 ER 25 - 15 Piece Set ER25 General, High & Top Accuracy SET 234 General, High & Top Accuracy SET 236 ER 11 - 13 Piece Set ER11 ER 32 - 18 Piece Set ER32 General, High & Top Accuracy SET 234 General, High & Top Accuracy SET 236 ER 16 - 10 Piece Set ER16 ER 40 - 23 Piece Set ER40 General, High & Top Accuracy SET 235 General, High & Top Accuracy SET 237 ER 20 - 12 Piece Set ER20 ER 50 - 12 Piece Set ER 50 General, High & Top Accuracy SET 235 General, High & Top Accuracy SET 237 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 19

index ER Collets & Chucks Toolholders & Accessories ER Tapping Collets DIN 6499-B ER 16 Tapping Collets ERT16 238 ER 32 Tapping Collets ERT32 239 ER 20 Tapping Collets ERT20 238 ER 40 Tapping Collets ERT40 239 ER 25 Tapping Collets ERT25 238 ER Tapping Collet Sets ERT16 ERT32 ERT 16 - 10 Piece Set 240 ERT 32 - 18 Piece Set 240 SET SET ERT20 ERT40 ERT 20 - 13 Piece Set 240 ERT 40 - 19 Piece Set 240 SET SET ERT25 ERT 25 - 15 Piece Set 240 SET ER Through Coolant Sealed Collets Through Coolant Sealed Collets Through Coolant Sealed Collets General purpose ERC 241 TOPAC Top Accuracy ERC 241 ER 16, 20, 25,32,40 ER 16, 20, 25,32,40 Through Coolant Sealed Collets Higher Accuracy ERC 241 ER 16, 20, 25,32,40 ER Through Coolant Sealed Collet Sets ERC 16 - 8 Piece Set ERC16 ERC 32 - 18 Piece Set ERC32 SET 242 SET 242 ERC 20 - 11 Piece Set ERC20 ERC 40 - 19 Piece Set ERC40 SET 242 SET 242 ERC 25 - 14 Piece Set ERC25 SET 242 Imperial ER Precision Collets Imperial Precision Collets Imperial Precision Collets ER + ER + General purpose 243 TOPAC Top Accuracy 244 size size ER 8, 11,16, 20, 25, 32, 40 ER 8, 11,16, 20, 25, 32, 40 Imperial Precision Collets ER + Higher Accuracy size 243 ER 8, 11,16, 20, 25, 32, 40 Imperial ER Through Coolant Sealed Collets Imperial Through coolant sealed Imperial Through coolant sealed IMP collets General purpose ERC 245 collets TOPAC Top Accuracy IMP 245 ER 16, 20, 25,32,40 ER 16, 20, 25,32,40 ERC Imperial Through coolant sealed IMP collets, Higher Accuracy 245 ERC ER 16, 20, 25,32,40 Toolholders and Accessories Face Mill / Shell Mill Adaptors 252 Locknuts NER 246 FM BT DIN ISO 253 Weldon Adaptors 254 Spanners SPER 247 W BT DIN ISO 255 Morse Taper Adaptors Pull Studs PS 249 MT 256 BT DIN ISO 249 Collet Chucks, BT DIN ISO HSK ER Straight Shank Toolholders ER 257 250 Drill Chuck adaptors, BT DIN ISO B 251 Accessories 258 Technical Information 259 20 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills 260 Range Options Stub, Standard, Long Length, Tools are available in 2, 3 and 4 Extra Long Length and Flute, Ball Nosed, Square End, Double-Ended Corner Radius and Neck Relief Size Delivery Metric: 1mm through to 25mm Over 150,00 tools available from Imperial: 1/32” through to 1” stock for Same-Day despatch Finish All tools are avaliable in Bright Finish and TiALN Coated 260 manufactured

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Standard FLAT Series 211 MG 2 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 Dia-D1 D1 +0.00/-0.051mm 3 Dia-D2 L1 L2 Number £ 2.1 - 2.3 4.1 - 5.3 1 3 3 38 211 -10301 21.77 D2 h6 1.5 3 5 38 211 -10302 21.77 3.1 - 3.4 9.1 4 2 Shank 6 FL OAL 211 -10303 PRICE 21.77 Part 3 Cutter 38 D1 Dia-D1 Dia-D2 L1 L2 211 -10304 21.77 Number £ 7 38 2.5 3 211 -10301 21.77 3 1 3 3 12 3 38 211 -10305 20.55 38 5 1.5 4 3 12 5 50 211 -10306 21.77 3.5 38 211 -10302 30.23 38 21.77 211 -10303 L1 4 2 4 3 14 6 50 211 -10307 25.64 21.77 211 -10308 2.5 5 3 14 7 50 211 -10304 36.25 4.5 38 6 5 3 5 3 16 38 211 -10309 33.09 20.55 50 12 211 -10305 211 -10310 30.23 6 3.5 6 4 12 63 211 -10306 38.01 50 19 25.64 211 -10311 7 4 8 4 19 50 211 -10307 51.79 63 14 211 -10312 63 47.62 19 L2 8 4.5 8 5 14 50 211 -10308 36.25 69.32 70 211 -10313 22 9 5 10 5 16 50 211 -10309 33.09 70 211 -10314 72.73 22 10 6 10 6 19 63 211 -10310 38.01 25 211 -10315 70 11 7 11 8 19 63 211 -10311 51.79 47.62 12 8 12 8 19 63 211 -10312 96.75 75 25 211 -10316 69.32 211 -10313 30 14 88 14 9 10 22 70 211 -10318 147.91 10 10 22 70 211 -10314 157.81 72.73 32 211 -10320 16 88 16 11 11 25 100 211 -10315 249.39 70 211 -10322 18 18 36 96.75 20 20 25 100 211 -10316 269.36 12 75 38 211 -10324 12 30 14 22 88 211 -10318 D2 22 14 38 100 211 -10326 147.91 157.81 25 25 38 100 211 -10320 421.16 88 211 -10329 32 16 16 18 18 36 100 211 -10322 249.39 20 20 38 100 211 -10324 269.36 22 22 38 100 211 -10326 421.16 38 25 Performance Solid Carbide - TiALN 100 25 211 -10329 Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Standard FLAT Series 214 Cutter Shank FL OAL Part PRICE £ Number MG Dia-D1 Dia-D2 L1 L2 214 -10301 28.51 260 1 2 TiALN 38 3 3 30º HM 1.5 PLAIN 3 5 38 214 -10302 28.51 2 38 3 28.51 Part Tolerances: Cutter Shank 6 FL OAL 214 -10303 PRICE 1.1 - 1.6 6.1 - 6.4 3 Number £ 7 2.5 38 3 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 214 -10304 28.51 38 3 1 3 3 12 3 38 214 -10305 26.81 2.1 - 2.3 4.1 - 5.3 214 -10301 28.51 D2 h6 1.5 4 3 12 5 50 214 -10306 43.36 3.1 - 3.4 1.7 - 1.8 38 28.51 214 -10302 3.5 4 4 2 4 3 14 6 38 214 -10307 33.43 28.51 214 -10303 50 D1 9.1 4.5 5 3 14 7 50 214 -10304 47.31 28.51 214 -10308 2.5 38 5 3 5 3 12 38 214 -10305 43.21 26.81 50 16 214 -10309 5 6 3.5 6 4 19 63 214 -10310 43.36 214 -10306 12 49.58 50 74.95 19 50 214 -10307 7 4 8 4 14 63 214 -10311 33.43 62.13 L1 8 4.5 8 5 14 63 214 -10312 47.31 214 -10308 19 50 6 9 5 10 5 16 70 214 -10309 108.64 43.21 214 -10313 50 22 214 -10310 70 19 49.58 10 6 10 6 22 63 214 -10314 94.87 214 -10311 63 19 11 7 11 8 25 70 214 -10315 74.95 12 8 12 8 19 63 214 -10312 126.33 62.13 75 25 214 -10316 14 88 108.64 22 214 -10318 L2 14 9 10 30 70 214 -10313 192.98 Modifications 94.87 10 10 22 70 214 -10314 195.63 Regrinds, Re coat 32 214 -10320 16 16 88 70 18 18 36 11 11 25 100 214 -10315 315.40 Specials 214 -10322 126.33 75 214 -10324 20 25 12 12 20 38 100 214 -10316 366.50 22 14 22 38 100 214 -10318 192.98 30 14 214 -10326 88 195.63 88 16 16 32 100 214 -10320 532.96 25 38 214 -10329 25 18 18 36 100 214 -10322 315.40 20 20 38 100 214 -10324 366.50 22 22 38 100 214 -10326 D2 25 25 38 100 214 -10329 532.96 manufactured 22 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix FLAT Series 311 Micro-grain K30 3-flute Standard 2 MG 260 3 30º HM PLAIN 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE Tolerances: 4 Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 1 3 3 38 311 -10401 21.77 D2 h6 3.1 - 3.4 9.1 1.5 3 5 38 311 -10402 21.77 Cutter Shank FL OAL 311 -10403 PRICE D1 5 Part 21.77 2 3 6 38 Dia-D1 Dia-D2 L1 L2 311 -10404 21.77 Number £ 7 3 2.5 38 3 1 3 3 12 3 38 311 -10401 21.77 311 -10405 20.55 38 30.23 6 1.5 4 3 12 5 38 311 -10402 21.77 311 -10406 3.5 50 4 2 4 3 14 6 38 311 -10403 21.77 50 25.64 311 -10407 L1 2.5 5 3 14 7 38 311 -10404 21.77 36.25 311 -10408 4.5 50 5 3 5 3 12 38 311 -10405 20.55 16 33.09 50 311 -10409 3.5 6 4 12 50 311 -10406 30.23 38.01 19 311 -10410 63 6 7 4 8 4 14 50 311 -10407 25.64 19 311 -10411 63 51.79 4.5 8 5 14 50 311 -10408 36.25 8 63 311 -10412 19 47.62 9 5 10 5 16 50 311 -10409 33.09 L2 70 311 -10413 22 69.32 10 6 10 6 19 63 311 -10410 38.01 72.73 311 -10414 70 22 11 7 11 8 19 63 311 -10411 51.79 311 -10415 70 25 96.75 47.62 12 8 12 8 19 63 311 -10412 147.91 75 25 311 -10416 69.32 14 9 10 22 70 311 -10413 157.81 30 88 311 -10418 14 10 10 22 70 311 -10414 249.39 72.73 16 311 -10420 32 16 88 70 96.75 11 11 25 100 311 -10415 269.36 36 18 311 -10422 18 12 12 25 100 311 -10416 147.91 75 20 38 20 421.16 311 -10424 14 14 30 100 311 -10418 157.81 D2 88 38 22 311 -10426 22 16 16 32 100 311 -10420 249.39 88 25 25 311 -10429 38 18 18 36 100 311 -10422 269.36 20 20 38 100 311 -10424 421.16 22 22 38 100 311 -10426 25 38 100 25 Performance Solid Carbide - TiALN 311 -10429 Centre Cutting Slot-Drills 30º Helix Series 314 Micro-grain K30 3-flute Standard 2 FLAT Cutter Shank FL OAL Part PRICE Dia-D1 Dia-D2 L1 L2 Number £ 260 TiALN MG 3 1 3 3 38 314 -10401 HM PLAIN 30º 1.5 3 5 38 314 -10402 28.51 Part 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL 314 -10403 PRICE 3 2 Tolerances: 28.51 6 38 Dia-D1 Dia-D2 L1 L2 314 -10404 28.51 4 £ Number 2.5 7 38 3 D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 3 1 3 3 12 3 38 314 -10401 28.51 38 314 -10405 D2 h6 50 314 -10406 26.81 3.5 3.1 - 3.4 1.7 - 1.8 1.5 4 3 12 5 38 314 -10402 28.51 43.36 5 4 2 4 3 14 6 38 314 -10403 28.51 314 -10407 50 9.1 D1 2.5 5 3 14 7 38 314 -10404 28.51 314 -10408 4.5 33.43 50 5 3 5 3 12 38 314 -10405 28.51 314 -10409 50 16 47.31 43.21 6 3.5 6 4 12 50 314 -10406 26.81 314 -10410 63 6 19 7 4 8 4 14 50 314 -10407 43.36 49.58 314 -10411 63 19 L1 4.5 8 5 14 50 314 -10408 33.43 63 19 314 -10412 8 74.95 9 5 10 5 16 50 314 -10409 47.31 62.13 314 -10413 70 22 10 6 10 6 19 63 314 -10410 108.64 43.21 314 -10414 70 22 11 7 11 8 19 63 314 -10411 49.58 70 25 94.87 314 -10415 74.95 12 8 12 8 19 63 314 -10412 126.33 25 314 -10416 75 Modifications 14 9 10 22 70 314 -10413 192.98 L2 62.13 30 88 14 314 -10418 Regrinds, Re coat 10 10 22 70 314 -10414 108.64 88 314 -10420 16 16 32 195.63 94.87 70 Specials 11 11 25 100 314 -10415 315.40 314 -10422 18 18 36 75 12 12 25 100 314 -10416 126.33 20 20 366.50 38 314 -10424 88 14 14 30 100 314 -10418 192.98 532.96 22 38 22 314 -10426 16 16 32 100 314 -10420 195.63 88 25 314 -10429 38 25 18 18 36 100 314 -10422 315.40 20 20 38 100 314 -10424 366.50 22 22 38 100 314 -10426 532.96 25 25 38 100 314 -10429 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 23

Solid Carbide Endmills Bright, TiALN & Radius 2 Solid Carbide General Purpose - Bright Finish 3 FLAT Centre Cutting End-Mills 30º Helix Micro-grain K30 4-flute Standard Series 411 MG 4 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 6.4 Dia-D1 D1 +0.00/-0.051mm 5 Dia-D2 L1 L2 Number £ 1 3 3 38 411 -10501 2.1 - 2.3 4.1 - 5.3 D2 h6 1.5 3 5 38 411 -10502 21.77 Part 2 6 Cutter Shank FL OAL 411 -10503 PRICE 3.1 - 3.4 9.1 6 3 21.77 38 D1 Dia-D1 Dia-D2 L1 L2 Number £ 2.5 3 7 38 411 -10504 21.77 1 3 3 38 411 -10501 21.77 3 411 -10502 38 1.5 3 12 38 411 -10505 21.77 3 5 3.5 4 12 50 411 -10506 20.55 2 3 6 38 411 -10503 21.77 30.23 4 38 7 3 2.5 4 14 50 411 -10507 21.77 411 -10504 L1 4.5 5 14 50 411 -10508 25.64 3 3 12 38 411 -10505 21.77 5 12 4 3.5 5 16 50 411 -10509 36.25 20.55 50 411 -10506 6 6 19 63 411 -10510 33.09 4 4 14 50 411 -10507 30.23 7 5 50 14 4.5 8 19 63 411 -10511 38.01 25.64 411 -10508 8 8 19 63 411 -10512 51.79 36.25 5 70 9 22 411 -10513 L2 5 10 16 50 411 -10509 47.62 411 -10510 6 63 33.09 6 19 10 10 22 70 411 -10514 69.32 19 8 63 7 411 -10511 38.01 11 11 25 70 411 -10515 72.73 51.79 411 -10512 63 19 8 8 12 12 25 75 411 -10516 96.75 9 411 -10513 70 22 10 47.62 14 14 30 88 411 -10518 147.91 10 10 22 70 411 -10514 69.32 16 16 32 88 411 -10520 157.81 11 11 25 70 411 -10515 72.73 18 18 36 100 411 -10522 249.39 12 12 25 75 411 -10516 96.75 20 20 38 100 411 -10524 269.36 14 14 30 88 411 -10518 147.91 22 22 38 100 411 -10526 421.16 16 16 32 88 411 -10520 157.81 100 18 36 18 411 -10522 D2 25 25 38 100 411 -10529 249.39 20 20 38 100 411 -10524 269.36 22 22 38 100 411 -10526 421.16 2 2 25 Performance Solid Carbide - TiALN 38 25 411 -10529 100 Centre Cutting End-Mills 30º Helix 3 3 Micro-grain K30 4-flute Standard FL FLATATFLAT Series 414 Cutter Shank FL OAL Part PRICE MG MG 4 4 Dia-D2 L1 L2 Number £ 260 Dia-D1 TiALNiALN T HM PLAI 30º HM 1 PLAINNPLAIN 3 3 38 414 -10501 3 38 1.5 28.51 Part FL Tolerances: Cutter Shank 5 OAL 414 -10502 PRICE 1.1 - 1.6 6.1 - 6.4 6 38 414 -10503 2 3 D1 +0.00/-0.051mm YPM 5 5 2.5 Dia-D2 L1 L2 414 -10504 28.51 2.1 - 2.3 4.1 - 5.3 Dia-D1 Number £ 38 3 7 28.51 1 3 414 -10505 38 3 3 D2 h6 1.5 3 12 38 414 -10501 28.51 414 -10502 5 38 3 28.51 HSS 3.5 4 12 50 414 -10506 26.81 3.1 - 3.4 1.7 - 1.8 2 6 6 38 3 28.51 414 -10503 6 Co8 4 4 14 50 414 -10507 43.36 D1 2.5 3 7 38 414 -10504 28.51 9.1 4.5 5 14 50 414 -10508 33.43 414 -10505 12 3 3 38 NG 3.5 5 16 50 414 -10509 28.51 5 47.31 12 4 414 -10506 50 26.81 HM 6 6 19 63 414 -10510 43.21 414 -10507 50 4 14 4 43.36 7 L1 4.5 8 19 63 414 -10511 49.58 50 5 414 -10508 14 33.43 DIN 8 8 19 63 414 -10512 74.95 50 5 16 414 -10509 5 47.31 844W 9 10 22 70 414 -10513 62.13 414 -10510 6 63 6 19 43.21 10 10 22 70 414 -10514 108.64 8 414 -10511 49.58 63 19 7 DIN 11 11 25 70 414 -10515 94.87 414 -10512 63 19 8 8 74.95 L2 844N 12 12 25 75 414 -10516 126.33 Modifications 70 22 414 -10513 10 9 62.13 14 14 30 88 414 -10518 192.98 70 10 10 22 88 414 -10514 108.64 Regrinds, Re coat 414 -10520 32 16 16 70 PMX 11 11 25 100 414 -10515 195.63 Specials 94.87 18 414 -10522 18 36 12 12 25 75 414 -10516 315.40 126.33 20 20 38 100 414 -10524 366.50 14 14 30 88 414 -10518 192.98 22 22 38 100 414 -10526 532.96 16 16 32 88 414 -10520 195.63 25 25 38 100 414 -10529 315.40 36 414 -10522 18 100 18 20 20 38 100 414 -10524 366.50 22 22 38 100 414 -10526 532.96 25 25 38 100 414 -10529 D2 manufactured 24 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix FLAT Series 211 Micro-grain K30 2-flute Standard MG 260 2 30º HM PLAIN 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE Tolerances: 3 Dia-D1 Dia-D2 L1 L2 Number £ D1 +0.00”-0.002” 2.1 - 2.3 4.1 - 5.3 1/32\" 1/8\" 3/32\" 1-1/2\" 211 -00302 D2 h6 3.1 - 3.4 9.1 1/16\" 1/8\" 1/4\" 1-1/2\" 211 -00304 22.80 3/32\" 1/8\" 3/8\" 1-1/2\" 211 -00306 22.80 D1 4 1/8\" 1/8\" 1/2\" 1-1/2\" 211 -00308 20.85 5/32\" 3/16\" 9/16\" 2\" 211 -00310 30.71 3/16\" 3/16\" 5/8\" 2\" 211 -00312 28.50 5 7/32\" 1/4\" 5/8\" 2-1/2\" 211 -00314 41.28 L1 1/4\" 1/4\" 3/4\" 2-1/2\" 211 -00316 42.17 9/32\" 5/16\" 7/8\" 2-1/2\" 211 -00318 51.59 6 5/16\" 5/16\" 7/8\" 2-1/2\" 211 -00320 49.88 3/8\" 3/8\" 7/8\" 2-1/2\" 211 -00324 62.33 7/16\" 7/16\" 1\" 2-1/2\" 211 -00328 83.99 1/2\" 1/2\" 1\" 3\" 211 -00332 102.72 L2 9/16\" 9/16\" 1-1/4\" 3-1/2\" 211 -00336 135.46 5/8\" 5/8\" 1-1/4\" 3-1/2\" 211 -00340 184.16 3/4\" 3/4\" 1-1/2\" 4\" 211 -00348 238.55 7/8\" 7/8\" 1-1/2\" 4\" 211 -00356 368.54 1\" 1\" 1-1/2\" 4\" 211 -00364 426.17 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix Series 214 Micro-grain K30 2-flute Standard Part PRICE FLAT Shank FL OAL Cutter Dia-D1 Dia-D2 L1 L2 Number £ 1/32\" 1/8\" 3/32\" 1-1/2\" 311 -00402 MG 22.80 260 TiALNTiALN 22.80 2 1/16\" 1/8\" 1/4\" 1-1/2\" 311 -00404 HM PLAIN 30º 30º 3/32\" 1/8\" 3/8\" 1-1/2\" 311 -00406 20.85 FL Part OAL 1.1 - 1.6 6.1 - 6.4 Cutter Shank 1/2\" 1-1/2\" 311 -00408 PRICE Tolerances: 1/8\" 1/8\" 30.71 Dia-D1 Dia-D2 L1 L2 Number 28.50 3 £ 3/16\" 5/32\" +0.00”-0.002” 9/16\" 311 -00410 2\" D1 2.1 - 2.3 4.1 - 5.3 1/8\" 1/32\" 3/16\" 3/32\" 1-1/2\" 214 -00302 29.68 h6 41.28 2\" 5/8\" 3/16\" 311 -00412 D2 1/16\" 1/8\" 1/4\" 2-1/2\" 42.17 311 -00414 3.1 - 3.4 1.7 - 1.8 7/32\" 1/4\" 5/8\" 1-1/2\" 214 -00304 29.57 3/8\" 1/8\" 3/32\" 1/4\" 3/4\" 1-1/2\" 214 -00306 27.11 4 51.59 311 -00416 1/4\" 2-1/2\" 1/8\" 1/2\" 9.1 9/32\" 5/16\" 7/8\" 1-1/2\" 214 -00308 41.05 D1 1/8\" 49.88 311 -00418 2-1/2\" 2\" 5/32\" 3/16\" 5/16\" 5/16\" 9/16\" 2-1/2\" 214 -00310 52.31 311 -00420 7/8\" 62.33 2\" 3/16\" 3/16\" 7/8\" 2-1/2\" 214 -00312 56.50 5 5/8\" 83.99 311 -00424 3/8\" 3/8\" 7/32\" 1/4\" 57.90 7/16\" 7/16\" 5/8\" 2-1/2\" 214 -00314 102.72 1\" 2-1/2\" 311 -00428 1/4\" 1/4\" 78.46 L1 1\" 1/2\" 1/2\" 3/4\" 2-1/2\" 214 -00316 135.46 311 -00432 3\" 9/32\" 5/16\" 7/8\" 72.38 3-1/2\" 9/16\" 9/16\" 1-1/4\" 2-1/2\" 214 -00318 184.16 6 311 -00436 5/16\" 5/16\" 1-1/4\" 2-1/2\" 214 -00320 238.55 7/8\" 82.72 311 -00440 5/8\" 3-1/2\" 5/8\" 3/8\" 7/8\" 3/8\" 3/4\" 3/4\" 1-1/2\" 2-1/2\" 214 -00324 112.04 368.54 4\" 311 -00448 1\" 7/16\" 7/16\" 1-1/2\" 2-1/2\" 214 -00328 140.58 311 -00456 4\" 7/8\" 426.17 7/8\" 1/2\" 3\" 1/2\" 1\" 311 -00464 4\" 1\" 1\" Modifications 9/16\" 9/16\" 1-1/2\" 3-1/2\" 214 -00332 212.84 L2 214 -00336 1-1/4\" 253.97 Regrinds, Re coat 5/8\" 5/8\" 1-1/4\" 3-1/2\" 214 -00340 310.65 Specials 3/4\" 3/4\" 1-1/2\" 4\" 214 -00348 479.95 7/8\" 7/8\" 1-1/2\" 4\" 214 -00356 555.02 1\" 1\" 1-1/2\" 4\" 214 -00364 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 25 Cutter Shank FL OAL Part PRICE Dia-D1 Dia-D2 L1 L2 Number £ 1/32\" 1/8\" 3/32\" 1-1/2\" 314 -00402 29.68 1/16\" 1/8\" 1/4\" 1-1/2\" 314 -00404 29.57 3/32\" 1/8\" 3/8\" 1-1/2\" 314 -00406 27.11 1/8\" 1/8\" 1/2\" 1-1/2\" 314 -00408 41.05 5/32\" 3/16\" 9/16\" 2\" 314 -00410 52.31 3/16\" 3/16\" 5/8\" 2\" 314 -00412 56.50 7/32\" 1/4\" 5/8\" 2-1/2\" 314 -00414 57.90 1/4\" 1/4\" 3/4\" 2-1/2\" 314 -00416 78.46 9/32\" 5/16\" 7/8\" 2-1/2\" 314 -00418 72.38 5/16\" 5/16\" 7/8\" 2-1/2\" 314 -00420 82.72 3/8\" 3/8\" 7/8\" 2-1/2\" 314 -00424 112.04 7/16\" 7/16\" 1\" 2-1/2\" 314 -00428 140.58 1/2\" 1/2\" 1\" 3\" 314 -00432 212.84 9/16\" 9/16\" 1-1/4\" 3-1/2\" 314 -00436 253.97 5/8\" 5/8\" 1-1/4\" 3-1/2\" 314 -00440 310.65 3/4\" 3/4\" 1-1/2\" 4\" 314 -00448 479.95 7/8\" 7/8\" 1-1/2\" 4\" 314 -00456 555.02 1\" 1\" 1-1/2\" 4\" 314 -00464

FL Cutter Part Shank OAL Dia-D1 £ Number 1/32\" 1/8\" 1-1/2\" 3/32\" 1/16\" 1/4\" 1-1/2\" 22.80 211 -00304 1/8\" 22.80 211 -00306 3/8\" 3/32\" 1/8\" 1-1/2\" 1/8\" 1-1/2\" 211 -00308 1/8\" 20.85 1/2\" 211 -00310 30.71 5/32\" 2\" 9/16\" 3/16\" 28.50 3/16\" 5/8\" 3/16\" 2\" 211 -00312 1/4\" 5/8\" 41.28 211 -00314 7/32\" 2-1/2\" 2-1/2\" 1/4\" 211 -00316 3/4\" 42.17 1/4\" 2-1/2\" 7/8\" 9/32\" 51.59 5/16\" 211 -00318 211 -00320 7/8\" 5/16\" 5/16\" 2-1/2\" 49.88 62.33 3/8\" 7/8\" 3/8\" 2-1/2\" 211 -00324 7/16\" 83.99 1\" 2-1/2\" 211 -00328 7/16\" 102.72 3\" 1/2\" 211 -00332 1/2\" 1\" 1-1/4\" 9/16\" 135.46 211 -00336 9/16\" 3-1/2\" 3-1/2\" 5/8\" 1-1/4\" 5/8\" 184.16 211 -00340 238.55 211 -00348 4\" 3/4\" 1-1/2\" 3/4\" 211 -00356 368.54 7/8\" Dia-D2 L1 L2 211 -00302 PRICE 1-1/2\" 7/8\" 4\" 1\" 426.17 4\" 1-1/2\" 211 -00364 1\" Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish 2 FLAT Centre Cutting Slot-Drills 30º Helix Micro-grain K30 3-flute Standard Series 311 MG 3 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 4 D1 +0.00”-0.002” Dia-D1 Dia-D2 L1 L2 Number £ 1/32\" 1/8\" 3/32\" 1-1/2\" 311 -00402 22.80 2.1 - 2.3 4.1 - 5.3 D2 h6 1/16\" 1/8\" 1/4\" 1-1/2\" 311 -00404 22.80 3.1 - 3.4 9.1 5 1/8\" 3/8\" 1-1/2\" 311 -00406 20.85 3/32\" D1 1/8\" 1/8\" 1/2\" 1-1/2\" 311 -00408 30.71 Cutter Shank FL OAL Part PRICE 9/16\" 5/32\" 311 -00410 3/16\" Dia-D1 Dia-D2 L1 L2 2\" Number 28.50 £ 6 3/16\" 5/8\" 2\" 311 -00412 41.28 3/16\" 1/8\" 1/32\" 311 -00414 5/8\" 42.17 2-1/2\" 7/32\" 1/4\" 3/32\" 1-1/2\" 214 -00302 29.68 1/4\" 1/8\" 1/4\" 311 -00416 2-1/2\" 51.59 L1 1/16\" 1/4\" 3/4\" 1-1/2\" 214 -00304 29.57 3/32\" 1/8\" 3/8\" 1-1/2\" 214 -00306 27.11 9/32\" 5/16\" 7/8\" 1-1/2\" 214 -00308 49.88 2-1/2\" 311 -00418 1/2\" 1/8\" 1/8\" 62.33 5/16\" 5/16\" 9/16\" 2-1/2\" 214 -00310 41.05 311 -00420 7/8\" 5/32\" 3/16\" 2\" 52.31 83.99 3/8\" 311 -00424 3/8\" 3/16\" 3/16\" 7/8\" 2-1/2\" 214 -00312 56.50 2\" 5/8\" 2-1/2\" 311 -00428 1\" 7/16\" 7/16\" 5/8\" 2-1/2\" 214 -00314 102.72 7/32\" 1/4\" 3\" 1\" 135.46 311 -00432 L2 1/2\" 1/2\" 3/4\" 2-1/2\" 214 -00316 57.90 1/4\" 1/4\" 78.46 9/16\" 9/16\" 1-1/4\" 2-1/2\" 214 -00318 72.38 3-1/2\" 184.16 311 -00436 5/16\" 9/32\" 7/8\" 238.55 311 -00440 5/8\" 5/8\" 3-1/2\" 7/8\" 5/16\" 5/16\" 1-1/4\" 2-1/2\" 214 -00320 82.72 368.54 311 -00448 3/4\" 3/4\" 1-1/2\" 2-1/2\" 214 -00324 112.04 4\" 3/8\" 3/8\" 7/8\" 7/8\" 4\" 7/8\" 426.17 311 -00456 1\" 7/16\" 7/16\" 1-1/2\" 2-1/2\" 214 -00328 140.58 1\" 1\" 1/2\" 1/2\" 1-1/2\" 3\" 4\" 214 -00332 1\" 311 -00464 212.84 9/16\" 9/16\" 1-1/4\" 3-1/2\" 214 -00336 253.97 5/8\" 5/8\" 1-1/4\" 3-1/2\" 214 -00340 310.65 3/4\" 3/4\" 1-1/2\" 4\" 214 -00348 479.95 7/8\" 7/8\" 1-1/2\" 4\" 214 -00356 555.02 D2 1\" 1\" 1-1/2\" 4\" 214 -00364 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix 2 FLAT Micro-grain K30 3-flute Standard Series 314 MG 3 T 260 TiALNiALN 30º HM PLAIN Tolerances: 1.1 - 1.6 6.1 - 6.4 4 D1 +0.00”-0.002” Cutter Shank FL OAL Part PRICE 2.1 - 2.3 4.1 - 5.3 Dia-D1 Dia-D2 L1 L2 Number £ D2 h6 3.1 - 3.4 1.7 - 1.8 1/32\" 5 1/8\" 3/32\" 1-1/2\" 314 -00402 29.68 1-1/2\" 1/16\" 29.57 1/4\" 314 -00404 1/8\" D1 9.1 3/32\" 1/8\" 3/8\" 1-1/2\" 314 -00406 27.11 1/8\" 1/2\" 6 1/8\" 3/16\" 9/16\" 1-1/2\" 314 -00408 41.05 314 -00410 5/32\" 2\" 52.31 3/16\" 3/16\" 5/8\" 2\" 314 -00412 56.50 L1 7/32\" 1/4\" 5/8\" 2-1/2\" 314 -00414 57.90 1/4\" 1/4\" 3/4\" 2-1/2\" 314 -00416 78.46 9/32\" 5/16\" 7/8\" 2-1/2\" 314 -00418 72.38 5/16\" 5/16\" 7/8\" 2-1/2\" 314 -00420 82.72 3/8\" 3/8\" 7/8\" 2-1/2\" 314 -00424 112.04 L2 7/16\" 7/16\" 1\" 2-1/2\" 314 -00428 140.58 Modifications 1/2\" 1/2\" 1\" 3\" 314 -00432 212.84 Regrinds, Re coat 9/16\" 9/16\" 1-1/4\" 3-1/2\" 314 -00436 253.97 Specials 5/8\" 5/8\" 1-1/4\" 3-1/2\" 314 -00440 310.65 3/4\" 3/4\" 1-1/2\" 4\" 314 -00448 479.95 7/8\" 7/8\" 1-1/2\" 4\" 314 -00456 555.02 1\" 1\" 1-1/2\" 4\" 314 -00464 D2 manufactured 26 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide General Purpose - Bright Finish 2 Solid Carbide Endmills Bright, TiALN & Radius Centre Cutting End-Mills 30º Helix FLAT Series 411 Micro-grain K30 4-flute Standard 3 MG 260 4 30º HM PLAIN Tolerances: 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Part PRICE 5 £ Dia-D1 Dia-D2 L1 L2 Number D1 +0.00”-0.002” 2.1 - 2.3 4.1 - 5.3 1/32\" 1/8\" 3/32\" 1-1/2\" 411 -00502 22.80 h6 D2 3.1 - 3.4 9.1 1/16\" 1/8\" 1/4\" 1-1/2\" 411- 00504 22.80 3/32\" 1/8\" 3/8\" 1-1/2\" 411- 00506 20.85 6 D1 1/8\" 1/8\" 1/2\" 1-1/2\" 411- 00508 30.71 5/32\" 3/16\" 9/16\" 2\" 411 -00510 28.50 3/16\" 3/16\" 5/8\" 2\" 411 -00512 41.28 7/32\" 1/4\" 5/8\" 2-1/2\" 411 -00514 42.17 L1 1/4\" 1/4\" 3/4\" 2-1/2\" 411 -00516 51.59 9/32\" 5/16\" 7/8\" 2-1/2\" 411 -00518 49.88 5/16\" 5/16\" 7/8\" 2-1/2\" 411 -00520 62.33 3/8\" 3/8\" 7/8\" 2-1/2\" 411 -00524 83.99 7/16\" 7/16\" 1\" 2-1/2\" 411 -00528 102.72 1/2\" 1/2\" 1\" 3\" 411 -00532 135.46 L2 9/16\" 9/16\" 1-1/4\" 3-1/2\" 411 -00536 184.16 5/8\" 5/8\" 1-1/4\" 3-1/2\" 411 -00540 238.55 3/4\" 3/4\" 1-1/2\" 4\" 411 -00548 368.54 7/8\" 7/8\" 1-1/2\" 4\" 411 -00556 426.17 1\" 1\" 1-1/2\" 4\" 411 -00564 D2 Performance Solid Carbide - TiALN 2 Centre Cutting End-Mills 30º Helix FLAT Series 414 Micro-grain K30 4-flute Standard 3 MG T 260 TiALNiALN 4 30º HM PLAIN 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Part PRICE Tolerances: Dia-D1 Dia-D2 L1 L2 Number £ D1 5 2.1 - 2.3 4.1 - 5.3 +0.00”-0.002” 1/32\" 1/8\" 3/32\" 1-1/2\" 414 -00502 29.68 D2 3.1 - 3.4 1.7 - 1.8 1/16\" 1/8\" 1/4\" 1-1/2\" 414 -00504 29.57 h6 3/32\" 1/8\" 3/8\" 1-1/2\" 414 -00506 27.11 6 9.1 1/8\" 1/8\" 1/2\" 1-1/2\" 414 -00508 41.05 D1 5/32\" 3/16\" 9/16\" 2\" 414 -00510 52.31 3/16\" 3/16\" 5/8\" 2\" 414 -00512 56.50 7/32\" 1/4\" 5/8\" 2-1/2\" 414 -00514 57.90 1/4\" 1/4\" 3/4\" 2-1/2\" 414 -00516 78.46 L1 9/32\" 5/16\" 7/8\" 2-1/2\" 414 -00518 72.38 5/16\" 5/16\" 7/8\" 2-1/2\" 414 -00520 82.72 3/8\" 3/8\" 7/8\" 2-1/2\" 414 -00524 112.04 7/16\" 7/16\" 1\" 2-1/2\" 414 -00528 140.58 1/2\" 1/2\" 1\" 3\" 414 -00532 212.84 Modifications 9/16\" 9/16\" 1-1/4\" 3-1/2\" 414 -00536 253.97 L2 Regrinds, Re coat 5/8\" 5/8\" 1-1/4\" 3-1/2\" 414 -00540 310.65 Specials 3/4\" 3/4\" 1-1/2\" 4\" 414 -00548 479.95 7/8\" 7/8\" 1-1/2\" 4\" 414 -00556 555.02 1\" 1\" 1-1/2\" 4\" 414 -00564 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 27

Solid Carbide Endmills Bright, TiALN & Radius Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Corner Radius FLAT Series 214R MG 2 TiALN 260 30º HM PLAIN 0.025 Tolerances: Cutter Shank FL OAL Corner Part PRICE 1.1 - 1.6 6.1 - 6.4 3 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Radius Number £ 4 4 14 50 0.25 214 -10307-0.25R 63.84 2.1 - 2.3 4.1 - 5.3 D2 h6 4 4 14 50 0.50 214 -10307-0.50R 63.84 3.1 - 3.4 1.7 - 1.8 4 4 4 14 50 0.75 214 -10307-0.75R 63.84 D1 9.1 4 4 14 50 1.00 214 -10307-1.00R 63.84 6 6 19 63 0.25 214 -10310-0.25R 66.45 5 6 6 19 63 0.50 214 -10310-0.50R 66.45 6 6 19 63 0.75 214 -10310-0.75R 66.45 L1 6 6 19 63 1.00 214 -10310-1.00R 66.45 6 6 6 19 63 1.25 214 -10310-1.25R 66.45 6 6 19 63 1.50 214 -10310-1.50R 66.45 8 8 19 63 0.50 214 -10312-0.50R 86.21 8 8 19 63 0.75 214 -10312-0.75R 86.21 L2 8 8 19 63 1.00 214 -10312-1.00R 86.21 8 8 19 63 1.25 214 -10312-1.25R 86.21 8 8 19 63 1.50 214 -10312-1.50R 86.21 8 8 19 63 2.00 214 -10312-2.00R 86.21 10 10 22 70 0.50 214 -10314-0.50R 109.79 10 10 22 70 0.75 214 -10314-0.75R 109.79 10 10 22 70 1.00 214 -10314-1.00R 109.79 10 10 22 70 1.50 214 -10314-1.50R 109.79 10 10 22 70 2.00 214 -10314-2.00R 109.79 10 10 22 70 3.00 214 -10314-3.00R 109.79 D2 12 12 25 75 0.50 214 -10316-0.50R 128.20 12 12 25 75 0.75 214 -10316-0.75R 128.20 12 12 25 75 1.00 214 -10316-1.00R 128.20 12 12 25 75 1.50 214 -10316-1.50R 128.20 12 12 25 75 2.00 214 -10316-2.00R 128.20 12 12 25 75 3.00 214 -10316-3.00R 128.20 16 16 32 88 0.50 214 -10320-0.50R 248.18 16 16 32 88 0.75 214 -10320-0.75R 248.18 16 16 32 88 1.00 214 -10320-1.00R 248.18 16 16 32 88 1.50 214 -10320-1.50R 248.18 16 16 32 88 2.00 214 -10320-2.00R 248.18 16 16 32 88 3.00 214 -10320-3.00R 248.18 20 20 38 100 0.50 214 -10324-0.50R 395.01 20 20 38 100 0.75 214 -10324-0.75R 395.01 20 20 38 100 1.00 214 -10324-1.00R 395.01 20 20 38 100 1.50 214 -10324-1.50R 395.01 20 20 38 100 2.00 214 -10324-2.00R 395.01 20 20 38 100 3.00 214 -10324-3.00R 395.01 Modifications Regrinds, Re coat Specials manufactured 28 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix FLAT Series 314R Micro-grain K30 3-flute Corner Radius 2 MG 260 TiALN 3 0.025 30º HM PLAIN Tolerances: 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Corner Part PRICE 4 Dia-D1 Dia-D2 L1 L2 Radius Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 4 4 14 50 0.25 314 -10407-0.25R 66.08 66.08 3.1 - 3.4 1.7 - 1.8 4 4 14 50 0.50 314 -10407-0.50R D2 h6 4 4 14 50 0.75 314 -10407-0.75R 66.08 D1 5 9.1 4 4 14 50 1.00 314 -10407-1.00R 66.08 6 6 19 63 0.25 314 -10410-0.25R 68.79 6 6 19 63 0.50 314 -10410-0.50R 68.79 6 6 6 19 63 0.75 314 -10410-0.75R 68.79 6 6 19 63 1.00 314 -10410-1.00R 68.79 L1 6 6 19 63 1.25 314 -10410-1.25R 68.79 6 6 19 63 1.50 314 -10410-1.50R 68.79 8 8 19 63 0.50 314 -10412-0.50R 89.23 8 8 19 63 0.75 314 -10412-0.75R 89.23 8 8 19 63 1.00 314 -10412-1.00R 89.23 L2 8 8 19 63 1.25 314 -10412-1.25R 89.23 8 8 19 63 1.50 314 -10412-1.50R 89.23 8 8 19 63 2.00 314 -10412-2.00R 89.23 10 10 22 70 0.50 314 -10414-0.50R 113.64 10 10 22 70 0.75 314 -10414-0.75R 113.64 10 10 22 70 1.00 314 -10414-1.00R 113.64 10 10 22 70 1.50 314 -10414-1.50R 113.64 10 10 22 70 2.00 314 -10414-2.00R 113.64 10 10 22 70 3.00 314 -10414-3.00R 113.64 D2 12 12 25 75 0.50 314 -10416-0.50R 132.69 12 12 25 75 0.75 314 -10416-0.75R 132.69 12 12 25 75 1.00 314 -10416-1.00R 132.69 12 12 25 75 1.50 314 -10416-1.50R 132.69 12 12 25 75 2.00 314 -10416-2.00R 132.69 12 12 25 75 3.00 314 -10416-3.00R 132.69 16 16 32 88 0.50 314 -10420-0.50R 256.87 16 16 32 88 0.75 314 -10420-0.75R 256.87 16 16 32 88 1.00 314 -10420-1.00R 256.87 16 16 32 88 1.50 314 -10420-1.50R 256.87 16 16 32 88 2.00 314 -10420-2.00R 256.87 16 16 32 88 3.00 314 -10420-3.00R 256.87 20 20 38 100 0.50 314 -10424-0.50R 408.84 20 20 38 100 0.75 314 -10424-0.75R 408.84 20 20 38 100 1.00 314 -10424-1.00R 408.84 20 20 38 100 1.50 314 -10424-1.50R 408.84 20 20 38 100 2.00 314 -10424-2.00R 408.84 20 20 38 100 3.00 314 -10424-3.00R 408.84 Modifications Regrinds, Re coat Specials manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 29

Solid Carbide Endmills Bright, TiALN & Radius 2 Performance Solid Carbide - TiALN 3 FLAT Centre Cutting End-Mills 30º Helix Micro-grain K30 4-flute Corner Radius Series 414R MG 4 TiALN 260 30º HM PLAIN 0.025 Tolerances: Cutter Shank FL OAL Corner Part PRICE 1.1 - 1.6 6.1 - 6.4 5 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Radius Number £ 4 4 14 50 0.25 414 -10507-0.25R 63.84 2.1 - 2.3 4.1 - 5.3 D2 h6 4 4 14 50 0.50 414 -10507-0.50R 63.84 3.1 - 3.4 1.7 - 1.8 4 6 4 14 50 0.75 414 -10507-0.75R 63.84 D1 9.1 4 4 14 50 1.00 414 -10507-1.00R 63.84 6 6 19 63 0.25 414 -10510-0.25R 66.45 6 6 19 63 0.50 414 -10510-0.50R 66.45 6 6 19 63 0.75 414 -10510-0.75R 66.45 L1 6 6 19 63 1.00 414 -10510-1.00R 66.45 6 6 19 63 1.25 414 -10510-1.25R 66.45 6 6 19 63 1.50 414 -10510-1.50R 66.45 8 8 19 63 0.50 414 -10512-0.50R 86.21 8 8 19 63 0.75 414 -10512-0.75R 86.21 L2 8 8 19 63 1.00 414 -10512-1.00R 86.21 8 8 19 63 1.25 414 -10512-1.25R 86.21 8 8 19 63 1.50 414 -10512-1.50R 86.21 8 8 19 63 2.00 414 -10512-2.00R 86.21 10 10 22 70 0.50 414 -10514-0.50R 109.79 10 10 22 70 0.75 414 -10514-0.75R 109.79 10 10 22 70 1.00 414 -10514-1.00R 109.79 10 10 22 70 1.50 414 -10514-1.50R 109.79 10 10 22 70 2.00 414 -10514-2.00R 109.79 10 10 22 70 3.00 414 -10514-3.00R 109.79 D2 12 12 25 75 0.50 414 -10516-0.50R 128.20 12 12 25 75 0.75 414 -10516-0.75R 128.20 12 12 25 75 1.00 414 -10516-1.00R 128.20 12 12 25 75 1.50 414 -10516-1.50R 128.20 12 12 25 75 2.00 414 -10516-2.00R 128.20 12 12 25 75 3.00 414 -10516-3.00R 128.20 16 16 32 88 0.50 414 -10520-0.50R 248.18 16 16 32 88 0.75 414 -10520-0.75R 248.18 16 16 32 88 1.00 414 -10520-1.00R 248.18 16 16 32 88 1.50 414 -10520-1.50R 248.18 16 16 32 88 2.00 414 -10520-2.00R 248.18 16 16 32 88 3.00 414 -10520-3.00R 248.18 20 20 38 100 0.50 414 -10524-0.50R 395.01 20 20 38 100 0.75 414 -10524-0.75R 395.01 20 20 38 100 1.00 414 -10524-1.00R 395.01 20 20 38 100 1.50 414 -10524-1.50R 395.01 20 20 38 100 2.00 414 -10524-2.00R 395.01 20 20 38 100 3.00 414 -10524-3.00R 395.01 Modifications Regrinds, Re coat Specials manufactured 30 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Performance Solid Carbide - TiALN 30º Helix - Long FLATSeries 740R Micro-grain K30 2-Flute Corner Radius MG 260 TiALN 2 0.025 30º HM PLAIN 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Corner Part PRICE Tolerances: 3 Dia-D1 Dia-D2 L1 L2 Radius Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 3 6 8 60 0.20 740 -25805-0.2R 77.57 D2 h6 3.1 - 3.4 1.7 - 1.8 3 6 8 60 0.50 740 -25805-0.5R 77.57 4 6 11 70 0.20 740 -25802-0.2R 77.57 D1 4 9.1 4 6 11 70 0.50 740 -25807-0.5R 83.11 4 6 11 70 1.00 740 -25807-1.0R 83.11 5 6 13 80 0.20 740 -25809-0.2R 89.99 5 5 6 13 80 0.50 740 -25809-0.5R 89.99 L1 5 6 13 80 1.00 740 -25809-1.0R 89.99 6 6 13 80 0.20 740 -25810-0.2R 100.65 6 6 13 80 0.50 740 -25810-0.5R 100.65 6 6 6 13 80 1.00 740 -25810-1.0R 100.65 6 6 13 80 1.50 740 -25810-1.5R 100.65 6 6 13 80 2.00 740 -25810-2.0R 100.65 8 8 19 100 0.50 740 -25812-0.5R 141.74 8 8 19 100 1.00 740 -25812-1.0R 141.74 8 8 19 100 1.50 740 -25812-1.5R 141.74 L2 8 8 19 100 2.00 740 -25812-2.0R 141.74 10 10 22 100 0.50 740 -25814-0.5R 167.00 10 10 22 100 1.00 740 -25814-1.0R 167.00 10 10 22 100 1.50 740 -25814-1.5R 167.00 10 10 22 100 2.00 740 -25814-2.0R 167.00 10 10 22 100 3.00 740 -25814-3.0R 167.00 12 12 26 110 0.50 740 -25816-0.5R 229.41 12 12 26 110 1.00 740 -25816-1.0R 229.41 12 12 26 110 1.50 740 -25816-1.5R 229.41 12 12 26 110 2.00 740 -25816-2.0R 229.41 12 12 26 110 3.00 740 -25816-3.0R 229.41 D2 Modifications Regrinds, Re coat Specials manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 31

Solid Carbide Endmills Bright, TiALN & Radius 2 Performance Solid Carbide - TiALN 3 FLAT 30º Helix - Long Micro-grain K30 4-Flute Corner Radius Series 745R MG 4 TiALN 260 30º HM PLAIN 0.025 Tolerances: Cutter Shank FL OAL Corner Part PRICE 1.1 - 1.6 6.1 - 6.4 5 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Radius Number £ 3 6 8 60 0.20 745 -26905-0.2R 77.57 2.1 - 2.3 4.1 - 5.3 D2 h6 3 6 8 60 0.50 745 -26905-0.5R 77.57 6 4 6 11 70 0.20 745 -26907-0.2R 77.57 3.1 - 3.4 1.7 - 1.8 D1 4 6 11 70 0.50 745 -26907-0.5R 83.11 9.1 4 6 11 70 1.00 745 -26907-1.0R 83.11 5 6 13 80 0.20 745 -26909-0.2R 89.99 5 6 13 80 0.50 745 -26909-0.5R 89.99 L1 5 6 13 80 1.00 745 -26909-1.0R 89.99 6 6 13 80 0.20 745 -26910-0.2R 100.65 6 6 13 80 0.50 745 -26910-0.5R 100.65 6 6 13 80 1.00 745 -26910-1.0R 100.65 6 6 13 80 1.50 745 -26910-1.5R 100.65 6 6 13 80 2.00 745 -26910-2.0R 100.65 8 8 19 100 0.50 745 -26912-0.5R 141.74 8 8 19 100 1.00 745 -26912-1.0R 141.74 L2 8 8 19 100 1.50 745 -26912-1.5R 141.74 8 8 19 100 2.00 745 -26912-2.0R 141.74 10 10 22 100 0.50 745 -26914-0.5R 167.00 10 10 22 100 1.00 745 -26914-1.0R 167.00 10 10 22 100 1.50 745 -26914-1.5R 167.00 10 10 22 100 2.00 745 -26914-2.0R 167.00 10 10 22 100 3.00 745 -26914-3.0R 167.00 12 12 26 110 0.50 745 -26916-0.5R 12 12 26 110 1.00 745 -26916-1.0R 167.00 12 12 26 110 1.50 745 -26916-1.5R 167.00 12 12 26 110 2.00 745 -26916-2.0R 167.00 12 12 26 110 3.00 745 -26916-3.0R 167.00 D2 Modifications Regrinds, Re coat Specials manufactured 32 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Performance Solid Carbide - TiALN 30º Helix Neck Relief - Long FLAT Series 750R Micro-grain K30 2-Flute Corner Radius MG 260 TiALN 2 0.025 30º HM PLAIN 1.1 - 1.6 6.1 - 6.4 Cutter Shank Neck FL OAL Reach Corner Part Tolerances: 3 Dia-D1 Dia-D2 Dia L1 L2 Radius Number D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 3 6 2.8 4.5 60 14 0.20 750 -27605-0.2R 3.1 - 3.4 1.7 - 1.8 3 6 2.8 4.5 60 14 0.50 750 -27605-0.5R D2 h6 4 6 3.7 6 70 25 0.20 750 -27607-0.2R D1 4 9.1 4 6 3.7 6 70 25 0.50 750 -27607-0.5R 4 6 3.7 6 70 25 1.00 750 -27607-1.0R 5 6 4.6 6 80 30 0.20 750 -27609-0.2R 5 5 6 4.6 7.5 80 30 0.50 750 -27609-0.5R L1 5 6 4.6 7.5 80 30 1.00 750 -27609-1.0R 6 6 5.5 9 80 35 0.20 750 -27610-0.2R 6 6 6 5.5 9 80 35 0.50 750 -27610-0.5R 6 6 5.5 9 80 35 1.00 750 -27610-1.0R 6 6 5.5 9 80 35 1.50 750 -27610-1.5R 6 6 5.5 9 80 35 2.00 750 -27610-2.0R 8 8 7.4 12 100 40 0.50 750 -27612-0.5R 8 8 7.4 12 100 40 1.00 750 -27612-1.0R 8 8 7.4 12 100 40 1.50 750 -27612-1.5R 8 8 7.4 12 100 40 2.00 750 -27612-2.0R L2 10 10 9.2 15 100 45 0.50 750 -27614-0.5R 10 10 9.2 15 100 45 1.00 750 -27614-1.0R 10 10 9.2 15 100 45 1.50 750 -27614-1.5R 10 10 9.2 15 100 45 2.00 750 -27614-2.0R 10 10 9.2 15 100 45 3.00 750 -27614-3.0R 12 12 11 18 110 50 0.50 750 -27616-0.5R 12 12 11 18 110 50 1.00 750 -27616-1.0R 12 12 11 18 110 50 1.50 750 -27616-1.5R 12 12 11 18 110 50 2.00 750 -27616-2.0R 12 12 11 18 110 50 3.00 750 -27616-3.0R D2 Modifications Regrinds, Re coat Specials manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 33

Solid Carbide Endmills Bright, TiALN & Radius 2 Performance Solid Carbide - TiALN 30º Helix Neck Relief - Long 3 Micro-grain K30 4-Flute Corner Radius FLAT Series 755R MG 4 TiALN 260 30º HM PLAIN 0.025 Tolerances: Cutter Shank Neck FL OAL Reach Corner Part 1.1 - 1.6 6.1 - 6.4 5 D1 +0.00/-0.051mm Dia-D1 Dia-D2 Dia L1 L2 Radius Number 3 6 2.8 4.5 60 14 0.20 755 -28705-0.2R 2.1 - 2.3 4.1 - 5.3 D2 h6 3 6 2.8 4.5 60 14 0.50 755 -28705-0.5R 6 4 6 3.7 6 70 25 0.20 755 -28707-0.2R 3.1 - 3.4 1.7 - 1.8 D1 4 6 3.7 6 70 25 0.50 755 -28707-0.5R 9.1 4 6 3.7 6 70 25 1.00 755 -28707-1.0R 5 6 4.6 6 80 30 0.20 755 -28709-0.2R 5 6 4.6 7.5 80 30 0.50 755 -28709-0.5R L1 5 6 4.6 7.5 80 30 1.00 755 -28709-1.0R 6 6 5.5 9 80 35 0.20 755 -28710-0.2R 6 6 5.5 9 80 35 0.50 755 -28710-0.5R 6 6 5.5 9 80 35 1.00 755 -28710-1.0R 6 6 5.5 9 80 35 1.50 755 -28710-1.5R 6 6 5.5 9 80 35 2.00 755 -28710-2.0R 8 8 7.4 12 100 40 0.50 755 -28712-0.5R 8 8 7.4 12 100 40 1.00 755 -28712-1.0R 8 8 7.4 12 100 40 1.50 755 -28712-1.5R 8 8 7.4 12 100 40 2.00 755 -28712-2.0R L2 10 10 9.2 15 100 45 0.50 755 -28714-0.5R 10 10 9.2 15 100 45 1.00 755 -28714-1.0R 10 10 9.2 15 100 45 1.50 755 -28714-1.5R 10 10 9.2 15 100 45 2.00 755 -28714-2.0R 10 10 9.2 15 100 45 3.00 755 -28714-3.0R 12 12 11 18 110 50 0.50 755 -28716-0.5R 12 12 11 18 110 50 1.00 755 -28716-1.0R 12 12 11 18 110 50 1.50 755 -28716-1.5R 12 12 11 18 110 50 2.00 755 -28716-2.0R 12 12 11 18 110 50 3.00 755 -28716-3.0R D2 Modifications Regrinds, Re coat Specials manufactured 34 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix Series 216 Micro-grain K30 2-flute Ball Nosed FLAT MG 260 2 30º HM PLAIN Tolerances: 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE 3 £ Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 1 3 3 38 216 -17501 27.62 D2 h6 3.1 - 3.4 9.1 1.5 3 5 38 216 -17502 27.62 Cutter Shank 6 FL OAL 216 -17503 PRICE D1 4 Part 26.81 3 2 38 Dia-D1 Dia-D2 L1 L2 216 -17504 26.81 £ Number 3 7 38 2.5 3 1 3 3 12 3 38 38 216 -17505 25.96 216 -17501 27.62 3.5 4 3 12 5 50 38 216 -17506 35.82 5 27.62 216 -17502 1.5 216 -17503 4 2 4 3 14 6 50 38 216 -17507 40.96 26.81 L1 2.5 216 -17504 26.81 4.5 5 3 14 7 50 38 216 -17508 49.34 25.96 5 3 5 3 16 12 50 38 216 -17509 60.34 6 216 -17505 35.82 50 216 -17506 6 3.5 6 4 19 63 216 -17510 96.50 12 7 4 8 4 19 14 63 50 216 -17511 137.02 40.96 216 -17507 49.34 8 4.5 8 5 19 14 63 216 -17512 220.37 50 216 -17508 60.34 216 -17509 9 5 10 5 22 16 70 216 -17513 217.78 L2 50 63 96.50 216 -17510 10 6 10 6 19 70 216 -17514 330.70 22 137.02 19 11 7 11 8 25 70 63 216 -17515 391.34 216 -17511 12 8 12 8 19 75 63 216 -17516 220.37 216 -17512 25 14 9 10 30 88 70 216 -17518 217.78 216 -17513 22 14 216 -17514 16 10 16 10 32 22 88 70 216 -17520 330.70 70 25 216 -17515 18 11 18 11 36 100 216 -17522 391.34 216 -17516 20 75 12 20 12 38 25 100 216 -17524 88 14 14 216 -17518 22 22 38 30 100 216 -17526 88 25 16 25 16 38 32 100 216 -17529 D2 216 -17520 18 18 36 100 216 -17522 20 20 38 100 216 -17524 22 22 38 100 216 -17526 100 38 25 25 Performance Solid Carbide - TiALN 216 -17529 Centre Cutting Slot-Drills 30º Helix Series 219 Micro-grain K30 2-flute Ball Nosed FLAT Cutter Shank FL OAL Part PRICE Dia-D1 Dia-D2 L1 L2 Number £ MG 260 TiALN 36.52 2 1 3 3 38 219 -17501 HM PLAIN 30º 1.5 3 5 38 219 -17502 36.52 1.1 - 1.6 6.1 - 6.4 Cutter Shank 6 FL OA 219 -17503 PRICE Part 34.91 3 38L 2 Tolerances: Number Dia-D1 Dia-D2 L1 L2 219 -17504 34.91 3 £ 2.5 3 7 38 D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 36.52 219 -17501 3 1 3 3 12 3 38 38 219 -17505 33.92 D2 h6 1.5 36.52 219 -17502 3.1 - 3.4 1.7 - 1.8 3.5 4 3 12 5 50 38 219 -17506 43.21 4 2 4 3 14 6 50 38 219 -17507 50.49 D1 4 34.91 219 -17503 9.1 2.5 34.91 219 -17504 4.5 5 3 14 7 50 38 219 -17508 55.75 5 3 5 3 16 12 50 38 219 -17509 71.58 219 -17505 33.92 43.21 6 3.5 6 4 19 63 219 -17510 120.03 5 12 219 -17506 50 50.49 219 -17507 7 4 8 4 19 14 63 50 219 -17511 153.09 L1 8 4.5 8 5 19 14 63 219 -17512 287.68 55.75 50 219 -17508 50 71.58 219 -17509 9 5 10 5 16 70 219 -17513 286.19 6 22 120.03 10 6 10 6 22 70 219 -17514 418.35 63 219 -17510 19 11 7 11 8 25 70 63 219 -17515 495.18 153.09 219 -17511 19 219 -17512 12 8 12 8 25 19 75 63 219 -17516 287.68 Modifications 14 9 10 30 22 88 70 219 -17513 286.19 L2 14 219 -17518 Regrinds, Re coat 16 10 16 10 32 22 88 70 219 -17514 418.35 219 -17520 Specials 18 11 18 11 36 100 219 -17515 495.18 25 70 219 -17522 20 12 20 38 25 100 219 -17516 75 12 219 -17524 14 14 30 88 219 -17518 22 22 38 100 219 -17526 25 16 25 38 32 100 219 -17529 88 16 219 -17520 18 18 36 100 219 -17522 20 20 38 100 219 -17524 22 22 38 100 219 -17526 25 25 38 100 219 -17529 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 35

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish 2 FLAT Centre Cutting Slot-Drills 30º Helix Micro-grain K30 3-flute Ball Nosed Series 316 MG 3 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 4 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Number £ 1 3 3 38 316 -17601 2.1 - 2.3 4.1 - 5.3 D2 h6 1.5 3 5 38 316 -17602 3.1 - 3.4 9.1 5 Cutter Shank 6 FL OAL 316 -17603 PRICE 38 Part 2 3 D1 Number Dia-D1 Dia-D2 L1 L2 316 -17604 £ 7 38 3 2.5 3 1 3 3 12 3 38 316 -17601 316 -17605 38 6 3.5 4 3 12 5 38 316 -17606 316 -17602 1.5 50 316 -17607 38 4 2 4 3 14 6 50 316 -17603 L1 316 -17608 2.5 4.5 5 3 14 7 38 316 -17604 50 38 316 -17609 5 3 5 3 12 50 316 -17605 16 6 3.5 6 4 12 50 316 -17606 63 316 -17610 19 316 -17611 50 19 7 4 8 4 14 63 316 -17607 19 63 8 4.5 8 5 14 50 316 -17612 316 -17608 316 -17613 L2 9 5 10 5 16 50 316 -17609 70 22 316 -17614 22 70 10 6 10 6 19 63 316 -17610 25 70 11 7 11 8 19 63 316 -17611 316 -17615 12 8 12 8 19 63 316 -17612 75 25 316 -17616 14 9 10 22 70 316 -17613 30 14 88 316 -17618 22 16 70 316 -17614 10 10 32 88 316 -17620 16 70 36 11 11 25 100 316 -17615 18 18 316 -17622 12 20 38 100 316 -17624 75 12 316 -17616 25 20 38 14 22 22 30 100 316 -17618 88 14 316 -17626 88 32 316 -17629 25 25 16 16 38 100 316 -17620 D2 18 18 36 100 316 -17622 20 20 38 100 316 -17624 22 22 38 100 316 -17626 38 25 25 Performance Solid Carbide - TiALN 316 -17629 100 Centre Cutting Slot-Drills 30º Helix 2 Micro-grain K30 3-flute Ball Nosed Series 319 Cutter FLAT Shank FL OAL Part PRICE MG Dia-D1 Dia-D2 L1 L2 Number £ 260 1 3 TiALN 30º HM PLAIN 3 3 38 319 -17601 1.5 3 5 38 319 -17602 Part 38 3 2 Tolerances: Cutter Shank 6 FL OAL 319 -17603 PRICE 1.1 - 1.6 6.1 - 6.4 4 Number 7 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 319 -17604 £ 2.1 - 2.3 4.1 - 5.3 38 3 2.5 319 -17605 38 D2 h6 3 1 3 3 12 3 38 319 -17601 50 1.5 3.5 4 3 12 5 38 319 -17602 3.1 - 3.4 1.7 - 1.8 319 -17606 5 4 2 4 3 14 6 38 319 -17603 50 319 -17607 D1 9.1 2.5 5 3 14 7 38 319 -17604 4.5 319 -17608 50 5 3 5 3 12 38 319 -17605 50 319 -17609 16 6 6 3.5 6 4 12 50 319 -17606 319 -17610 19 63 7 4 8 4 19 50 319 -17607 63 14 319 -17611 L1 4.5 8 5 14 50 319 -17608 63 319 -17612 19 8 9 5 10 5 16 50 319 -17609 70 22 319 -17613 10 6 10 6 19 63 319 -17610 70 22 319 -17614 7 70 25 11 11 8 19 63 319 -17611 319 -17615 12 8 12 8 19 63 319 -17612 319 -17616 75 25 L2 9 10 22 70 319 -17613 Modifications 14 14 30 88 319 -17618 10 88 319 -17620 32 16 16 10 22 70 319 -17614 Regrinds, Re coat 70 11 11 25 100 319 -17615 Specials 18 36 18 319 -17622 12 12 25 100 319 -17616 75 38 20 20 319 -17624 14 14 30 100 319 -17618 88 22 38 319 -17626 22 88 16 16 32 100 319 -17620 38 25 319 -17629 25 18 18 36 100 319 -17622 20 20 38 100 319 -17624 22 22 38 100 319 -17626 25 25 38 100 319 -17629 D2 manufactured 36 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide General Purpose - Bright Finish 2 Solid Carbide Endmills Bright, TiALN & Radius Centre Cutting End-Mills 30º Helix FLAT Series 416 Micro-grain K30 4-flute Ball Nosed 3 MG 260 4 30º HM PLAIN 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Part PRICE Tolerances: 5 Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 1 3 3 38 416 -17701 3.1 - 3.4 9.1 1.5 3 5 38 416 -17702 D2 h6 2 3 6 38 416 -17703 D1 6 2.5 3 7 38 416 -17704 3 3 12 38 416 -17705 3.5 4 12 50 416 -17706 4 4 14 50 416 -17707 4.5 5 14 50 416 -17708 L1 5 5 50 Part FL Cutter Shank 16 OAL 416 -17709 PRICE 6 Number L2 Dia-D1 Dia-D2 19 63 416 -17710 £ 6 L1 38 416 -17701 7 1 8 3 19 3 63 416 -17711 8 63 416 -17702 1.5 8 3 19 5 38 416 -17712 70 416 -17703 9 2 10 3 22 6 38 416 -17713 L2 10 416 -17704 2.5 10 3 22 7 38 416 -17714 70 416 -17705 11 3 11 3 25 70 416 -17715 12 38 3.5 75 25 12 12 4 12 50 416 -17716 416 -17706 14 4 14 4 14 50 416 -17718 416 -17707 88 30 88 32 4.5 16 5 14 50 416 -17720 16 416 -17708 36 18 5 18 5 16 100 416 -17722 416 -17709 50 20 6 20 6 19 100 416 -17710 63 416 -17724 38 63 22 7 22 8 38 100 416 -17726 416 -17711 19 416 -17712 63 19 25 8 25 8 38 100 416 -17729 D2 9 10 22 70 416 -17713 Part Cutter Shank FL OAL 416 -17714 PRICE 10 10 22 70 Dia-D1 Dia-D2 L1 L2 416 -17715 £ Number 70 11 25 11 Performance Solid Carbide - TiALN 419 -17701 2 38 416 -17716 1 12 75 3 12 3 25 1.5 38 3 14 5 30 14 416 -17718 88 Centre Cutting End-Mills 30º Helix 419 -17702 Series 419 88 416 -17720 2 16 3 16 6 32 38 419 -17703 3 2.5 38 Micro-grain K30 4-flute Ball Nosed 419 -17704 FLAT 416 -17722 18 7 36 3 18 100 38 3 20 3 20 12 100 419 -17705 38 416 -17724 3.5 4 22 12 100 419 -17706 MG 50 22 416 -17726 38 260 TiALN 4 50 416 -17729 38 4 25 4 25 14 100 419 -17707 HM PLAIN 30º 4.5 5 14 50 419 -17708 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL 419 -17709 PRICE Tolerances: 5 Part 50 16 5 5 Dia-D1 Dia-D2 L1 L2 419 -17710 D1 +0.00/-0.051mm Number £ 6 19 6 63 2.1 - 2.3 4.1 - 5.3 38 7 1 8 3 19 3 63 419 -17711 D2 h6 419 -17701 3.1 - 3.4 1.7 - 1.8 1.5 8 3 19 5 63 419 -17702 8 419 -17712 38 419 -17713 9 2 10 3 22 6 70 419 -17703 6 38 9.1 D1 419 -17714 10 2.5 10 3 22 7 70 419 -17704 38 419 -17715 38 12 11 3 11 3 25 70 419 -17705 419 -17716 25 75 12 3.5 12 4 12 50 419 -17706 30 14 4 14 4 14 50 419 -17707 88 419 -17718 14 4.5 16 5 32 50 419 -17720 L1 16 88 419 -17708 36 18 5 18 5 16 100 419 -17709 419 -17722 50 419 -17724 38 20 6 20 6 19 100 419 -17710 63 38 22 7 22 8 19 100 419 -17726 63 419 -17711 25 8 25 8 38 100 419 -17729 19 419 -17712 63 Modifications 9 10 22 70 419 -17713 L2 Regrinds, Re coat 10 10 22 70 419 -17714 Specials 11 11 25 70 419 -17715 12 12 25 75 419 -17716 14 14 30 88 419 -17718 16 16 32 88 419 -17720 18 18 36 100 419 -17722 20 20 38 100 419 -17724 22 22 38 100 419 -17726 25 25 38 100 419 -17729 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 37

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Ball Nosed FLAT Series 216 MG 2 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 3 D1 +0.00”-0.002” Dia-D1 Dia-D2 L1 L2 Number £ 1/16\" 1/8\" 1/4\" 1-1/2\" 216 -07504 28.07 2.1 - 2.3 4.1 - 5.3 D2 h6 3/32\" 1/8\" 3/8\" 1-1/2\" 216 -07506 28.07 9.1 4 1/8\" 1/8\" 1/2\" 1-1/2\" 216 -07508 27.37 3.1 - 3.4 D1 5/32\" 3/16\" 9/16\" 2\" 216 -07510 37.67 3/16\" 3/16\" 5/8\" 2\" 216 -07512 36.46 5 1/4\" 5/8\" 2-1/2\" 216 -07514 49.61 7/32\" 1/4\" 1/4\" 3/4\" 2-1/2\" 216 -07516 52.54 L1 9/32\" 5/16\" 7/8\" 2-1/2\" 216 -07518 63.53 6 5/16\" 7/8\" 2-1/2\" 216 -07520 63.12 5/16\" 3/8\" 3/8\" 7/8\" 2-1/2\" 216 -07524 78.14 7/16\" 7/16\" 1\" 2-1/2\" 216 -07528 97.72 1/2\" 1/2\" 1\" 3\" 216 -07532 135.53 5/8\" 5/8\" 1-1/4\" 3-1/2\" 216 -07540 277.21 L2 3/4\" 3/4\" 1-1/2\" 4\" 216 -07548 7/8\" 7/8\" 1-1/2\" 4\" 216 -07556 1\" 1\" 1-1/2\" 4\" 216 -07564 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Ball Nosed FLAT Series 219 MG 2 TiALN 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 6.4 3 D1 +0.00”-0.002” Dia-D1 Dia-D2 L1 L2 Number £ 1/16\" 1/8\" 1/4\" 1-1/2\" 219 -07504 28.07 2.1 - 2.3 4.1 - 5.3 D2 h6 3/32\" 1/8\" 3/8\" 1-1/2\" 219 -07506 28.07 3.1 - 3.4 1.7 - 1.8 4 1/8\" 1/8\" 1/2\" 1-1/2\" 219 -07508 27.37 D1 9.1 5/32\" 3/16\" 9/16\" 2\" 219 -07510 37.67 3/16\" 3/16\" 5/8\" 2\" 219 -07512 36.46 5 1/4\" 5/8\" 2-1/2\" 219 -07514 49.61 7/32\" 1/4\" 1/4\" 3/4\" 2-1/2\" 219 -07516 52.54 L1 9/32\" 5/16\" 7/8\" 2-1/2\" 219 -07518 63.53 6 5/16\" 7/8\" 2-1/2\" 219 -07520 63.12 5/16\" 3/8\" 3/8\" 7/8\" 2-1/2\" 219 -07524 78.14 7/16\" 7/16\" 1\" 2-1/2\" 219 -07528 97.72 1/2\" 1/2\" 1\" 3\" 219 -07532 135.53 L2 5/8\" 5/8\" 1-1/4\" 3-1/2\" 219 -07540 277.21 Modifications 3/4\" 3/4\" 1-1/2\" 4\" 219 -07548 Regrinds, Re coat 7/8\" 7/8\" 1-1/2\" 4\" 219 -07556 Specials 1\" 1\" 1-1/2\" 4\" 219 -07564 D2 manufactured 38 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix Series 316 Micro-grain K30 3-flute Ball Nosed 2 FLAT MG 260 3 30º HM PLAIN 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE Tolerances: 4 D1 Dia-D1 Dia-D2 L1 L2 Number £ +0.00”-0.002” 2.1 - 2.3 4.1 - 5.3 1/16\" 1/8\" 1/4\" 1-1/2\" 316 -07604 28.07 h6 D2 3.1 - 3.4 9.1 3/32\" 1/8\" 3/8\" 1-1/2\" 316 -07606 28.07 1/8\" 1/8\" 1/2\" 1-1/2\" 316 -07608 27.37 5 D1 5/32\" 3/16\" 9/16\" 2\" 316 -07610 37.67 3/16\" 3/16\" 5/8\" 2\" 316 -07612 36.46 7/32\" 1/4\" 5/8\" 2-1/2\" 316 -07614 49.61 6 1/4\" 1/4\" 3/4\" 2-1/2\" 316 -07616 52.54 L1 9/32\" 5/16\" 7/8\" 2-1/2\" 316 -07618 63.53 5/16\" 5/16\" 7/8\" 2-1/2\" 316 -07620 63.12 78.14 3/8\" 3/8\" OAL FL Part Cutter Shank 7/8\" 2-1/2\" 316 -07624 PRICE 1\" 7/16\" 2-1/2\" £ Number Dia-D1 Dia-D2 L1 L2 316 -07628 97.72 7/16\" 1/2\" 1\" 3\" 28.07 1/8\" 316 -07604 1/16\" 1/2\" 1/4\" 1-1/2\" 316 -07632 135.53 1-1/2\" 3/32\" 5/8\" 1-1/4\" 3-1/2\" 316 -07640 277.21 L2 1/8\" 5/8\" 28.07 3/8\" 316 -07606 316 -07608 1/8\" 1/2\" 4\" 3/4\" 3/4\" 1-1/2\" 1-1/2\" 316 -07648 27.37 1/8\" 9/16\" 5/32\" 3/16\" 1-1/2\" 4\" 2\" 316 -07656 37.67 316 -07610 7/8\" 7/8\" 3/16\" 3/16\" 1-1/2\" 4\" 2\" 316 -07664 36.46 5/8\" 1\" 1\" 316 -07612 7/32\" 1/4\" 5/8\" 2-1/2\" 316 -07614 49.61 1/4\" 1/4\" 3/4\" 2-1/2\" 316 -07616 52.54 9/32\" 5/16\" 7/8\" 2-1/2\" 316 -07618 63.53 5/16\" 5/16\" 7/8\" 2-1/2\" 316 -07620 63.12 3/8\" 3/8\" 7/8\" 2-1/2\" 316 -07624 78.14 7/16\" 7/16\" 1\" 2-1/2\" 316 -07628 97.72 D2 135.53 1/2\" 3\" 1/2\" FL Cutter Shank 1\" OAL 316 -07632 PRICE Part £ Number Dia-D1 Dia-D2 L1 L2 316 -07640 277.21 3-1/2\" 5/8\" 1-1/4\" 5/8\" 1/16\" 1/8\" 1-1/2\" 1-1/2\" 319 -07604 28.07 1/4\" 316 -07648 3/4\" 4\" 3/4\" Performance Solid Carbide - TiALN 319 -07606 28.07 3/8\" 1/8\" 3/32\" 1-1/2\" 1-1/2\" 316 -07656 7/8\" 7/8\" 4\" 1/8\" 1-1/2\" 1/8\" 1/2\" 1-1/2\" 1\" 4\" 316 -07664 1\" Centre Cutting Slot-Drills 30º Helix 319 -07608 27.37 Series 319 5/32\" 3/16\" 9/16\" 2\" 319 -07610 37.67 Micro-grain K30 3-flute Ball Nosed 319 -07612 36.46 2 FLAT 5/8\" 2\" 3/16\" 3/16\" 7/32\" 1/4\" 5/8\" 2-1/2\" 319 -07614 49.61 1/4\" 1/4\" 3/4\" 2-1/2\" 319 -07616 52.54 MG 260 TiALN 3 HM 9/32\" 5/16\" 7/8\" 2-1/2\" 319 -07618 30º 63.53 PLAIN 5/16\" 5/16\" 7/8\" 2-1/2\" 319 -07620 63.12 1.1 - 1.6 6.1 - 6.4 PRICE Tolerances: 3/8\" 3/8\" OAL Part FL Cutter Shank 7/8\" 2-1/2\" 319 -07624 78.14 97.72 4 1\" Number 7/16\" 7/16\" 2-1/2\" £ 2.1 - 2.3 4.1 - 5.3 Dia-D1 Dia-D2 L1 L2 319 -07628 D1 +0.00”-0.002” 1/2\" 3\" 1\" 319 -07604 1/8\" 1/16\" 1/2\" 1/4\" 1-1/2\" 319 -07632 135.53 h6 28.07 D2 3.1 - 3.4 1.7 - 1.8 3/32\" 5/8\" 1-1/4\" 3-1/2\" 319 -07640 277.21 1/8\" 28.07 319 -07606 3/8\" 5/8\" 1-1/2\" 4\" 1/8\" 1/8\" 1/2\" 319 -07608 D1 9.1 3/4\" 3/4\" 1-1/2\" 1-1/2\" 319 -07648 27.37 5 319 -07610 9/16\" 5/32\" 3/16\" 1-1/2\" 4\" 2\" 319 -07656 37.67 7/8\" 7/8\" 5/8\" 319 -07612 1\" 1\" 3/16\" 3/16\" 1-1/2\" 4\" 2\" 319 -07664 36.46 7/32\" 1/4\" 5/8\" 2-1/2\" 319 -07614 49.61 6 1/4\" 1/4\" 3/4\" 2-1/2\" 319 -07616 52.54 L1 9/32\" 5/16\" 7/8\" 2-1/2\" 319 -07618 63.53 5/16\" 5/16\" 7/8\" 2-1/2\" 319 -07620 63.12 3/8\" 3/8\" 7/8\" 2-1/2\" 319 -07624 78.14 7/16\" 7/16\" 1\" 2-1/2\" 319 -07628 97.72 1/2\" 1/2\" 1\" 3\" 319 -07632 135.53 Modifications 5/8\" 3-1/2\" 277.21 L2 5/8\" Regrinds, Re coat 3/4\" 3/4\" 1-1/4\" 4\" 319 -07640 1-1/2\" 319 -07648 Specials 7/8\" 7/8\" 1-1/2\" 4\" 319 -07656 1\" 1\" 1-1/2\" 4\" 319 -07664 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 39

Solid Carbide Endmills Bright, TiALN & Radius 2 Solid Carbide General Purpose - Bright Finish Centre Cutting End-Mills 30º Helix 3 FLAT Micro-grain K30 4-flute Ball Nosed Series 416 MG 4 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 6.4 5 D1 +0.00”-0.002” Dia-D1 Dia-D2 L1 L2 Number £ 2.1 - 2.3 4.1 - 5.3 D2 h6 1/16\" 1/8\" 1/4\" 1-1/2\" 416 -07704 28.07 3/32\" 1/8\" 3/8\" 1-1/2\" 416 -07706 28.07 3.1 - 3.4 9.1 6 1/8\" 1/8\" 1/2\" 1-1/2\" 416 -07708 27.37 D1 5/32\" 3/16\" 9/16\" 2\" 416 -07710 37.67 3/16\" 3/16\" 5/8\" 2\" 416 -07712 36.46 7/32\" 1/4\" 5/8\" 2-1/2\" 416 -07714 49.61 1/4\" 1/4\" 3/4\" 2-1/2\" 416 -07716 52.54 L1 9/32\" 5/16\" 7/8\" 2-1/2\" 416 -07718 63.53 5/16\" 5/16\" 7/8\" 2-1/2\" 416 -07720 63.12 3/8\" 3/8\" 7/8\" 2-1/2\" 416 -07724 78.14 7/16\" 7/16\" 1\" 2-1/2\" 416 -07728 97.72 1/2\" 1/2\" 1\" 3\" 416 -07732 135.53 L2 5/8\" 5/8\" 1-1/4\" 3-1/2\" 416 -07740 277.21 3/4\" 3/4\" 1-1/2\" 4\" 416 -07748 7/8\" 7/8\" 1-1/2\" 4\" 416 -07756 1\" 1\" 1-1/2\" 4\" 416 -07764 D2 2 Performance Solid Carbide - TiALN Centre Cutting End-Mills 30º Helix 3 FLAT Micro-grain K30 4-flute Ball Nosed Series 419 MG 4 TiALN 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 6.4 5 D1 +0.00”-0.002” Dia-D1 Dia-D2 L1 L2 Number £ 2.1 - 2.3 4.1 - 5.3 1/16\" 1/8\" 1/4\" 1-1/2\" 419 -07704 28.07 D2 h6 3/32\" 1/8\" 3/8\" 1-1/2\" 419 -07706 28.07 3.1 - 3.4 1.7 - 1.8 6 1/8\" 1/8\" 1/2\" 1-1/2\" 419 -07708 27.37 D1 9.1 5/32\" 3/16\" 9/16\" 2\" 419 -07710 37.67 3/16\" 3/16\" 5/8\" 2\" 419 -07712 36.46 7/32\" 1/4\" 5/8\" 2-1/2\" 419 -07714 49.61 1/4\" 1/4\" 3/4\" 2-1/2\" 419 -07716 52.54 9/32\" 5/16\" 7/8\" 2-1/2\" 419 -07718 63.53 L1 5/16\" 5/16\" 7/8\" 2-1/2\" 419 -07720 63.12 3/8\" 3/8\" 7/8\" 2-1/2\" 419 -07724 78.14 7/16\" 7/16\" 1\" 2-3/4\" 419 -07728 97.72 1/2\" 1/2\" 1\" 3\" 419 -07732 135.53 L2 5/8\" 5/8\" 1-1/4\" 3-1/2\" 419 -07740 277.21 Modifications 3/4\" 3/4\" 1-1/2\" 4\" 419 -07748 Regrinds, Re coat 7/8\" 7/8\" 1-1/2\" 4\" 419 -07756 Specials 1\" 1\" 1-1/2\" 4\" 419 -07764 D2 manufactured 40 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix FLAT Series 211S Micro-grain K30 2-flute Stub Mills MG 260 2 30º HM PLAIN 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE Tolerances: 3 Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 1 3 2 38 211S -85001 21.78 D2 h6 3.1 - 3.4 9.1 1.5 3 3 38 211S -85051 21.78 Cutter Shank FL OAL 211S -85101 PRICE D1 4 Part 16.46 4 3 2 38 Dia-D1 Dia-D2 L1 L2 Number £ 2.5 3 5 38 211S -85151 16.46 1 3 3 3 2 6 38 211S -85001 21.78 211S -85201 16.46 38 1.5 3 4 3 7 38 211S -85051 21.78 5 211S -85251 23.40 3.5 50 2 4 3 4 4 8 38 211S -85101 16.46 L1 211S -85301 23.40 50 2.5 3 5 5 9 38 211S -85151 16.46 23.40 50 211S -85351 4.5 3 5 3 5 10 38 211S -85201 16.46 6 6 29.16 50 211S -85401 3.5 4 6 12 50 211S -85251 23.40 7 211S -85451 6 29.86 50 4 8 4 8 12 50 211S -85301 23.40 8 50 34.50 211S -85501 5 9 4.5 10 14 50 211S -85351 23.40 L2 10 62.77 50 211S -85551 5 5 12 12 10 50 211S -85401 29.16 63 211S -85601 72.76 16 6 6 211S -85651 155.46 20 75 16 16 12 50 211S -85451 29.86 8 8 25 20 20 12 50 211S -85501 34.50 75 211S -85701 222.57 10 10 14 50 211S -85551 62.77 12 12 16 63 211S -85601 72.76 16 16 20 75 211S -85651 155.46 20 20 25 75 211S -85701 222.57 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix FLAT Series 214S Micro-grain K30 2-flute Stub Mills Cutter Shank FL OAL Part PRICE Dia-D1 Dia-D2 L1 L2 Number MG £ 260 TiALN 2 HM 1 3 2 38 214S -85001 28.39 PLAIN 30º 1.5 3 3 38 214S -85051 28.39 1.1 - 1.6 6.1 - 6.4 Cutter Shank 4 FL OAL 214S -85101 PRICE Tolerances: Part 21.55 2 38 3 3 Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 2.5 3 5 38 214S -85151 21.55 1 3 3 3 2 6 38 214S -85001 28.39 21.55 38 214S -85201 D2 h6 3.1 - 3.4 1.7 - 1.8 1.5 3 4 3 7 38 214S -85051 28.39 214S -85251 30.48 3.5 50 2 4 3 4 4 8 38 214S -85101 21.55 4 214S -85301 30.48 50 9.1 D1 2.5 3 5 5 9 38 214S -85151 21.55 30.48 214S -85351 50 4.5 3 5 3 5 10 38 214S -85201 21.55 6 214S -85401 50 38.04 3.5 4 6 12 50 214S -85251 30.48 5 7 6 214S -85451 38.97 50 4 8 4 8 12 50 214S -85301 30.48 8 45.06 L1 50 214S -85501 4.5 10 14 50 214S -85351 30.48 9 5 214S -85551 50 81.83 10 5 5 94.99 16 63 12 12 10 50 214S -85401 38.04 6 214S -85601 38.97 6 6 20 16 16 12 50 214S -85451 202.93 214S -85651 75 45.06 8 8 25 20 20 12 50 214S -85501 290.44 214S -85701 75 10 10 14 50 214S -85551 81.83 L2 Modifications 12 12 16 63 214S -85601 94.99 Regrinds, Re coat 16 16 20 75 214S -85651 202.93 Specials 20 20 25 75 214S -85701 290.44 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 41

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish 2 FLAT Centre Cutting Slot-Drills 30º Helix Micro-grain K30 3-flute Stub Mills Series 311S MG 3 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 4 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Number £ 1 3 2 38 311S -85002 21.78 2.1 - 2.3 4.1 - 5.3 D2 h6 1.5 3 3 38 311S -85052 21.78 3.1 - 3.4 9.1 5 Cutter Shank 4 FL OAL 311S -85102 PRICE Part 16.46 38 2 3 D1 £ Dia-D1 Dia-D2 L1 L2 311S -85152 16.46 Number 5 3 38 2.5 21.78 38 311S -85202 3 1 3 3 6 2 38 311S -85002 16.46 21.78 6 3.5 4 3 7 3 50 311S -85252 23.40 1.5 311S -85052 38 23.40 38 311S -85302 L1 4 2 4 3 8 4 50 311S -85102 16.46 4.5 5 3 9 5 50 311S -85352 23.40 16.46 2.5 38 311S -85152 5 3 5 3 10 6 50 311S -85402 29.16 311S -85202 38 16.46 6 3.5 6 4 12 7 50 311S -85452 29.86 311S -85252 50 23.40 50 311S -85302 8 4 8 4 12 8 50 311S -85502 34.50 23.40 50 4.5 10 5 14 9 50 311S -85352 62.77 10 311S -85552 23.40 311S -85402 10 29.16 50 L2 12 5 12 5 16 63 311S -85602 72.76 20 75 311S -85652 155.46 16 6 16 6 12 50 311S -85452 29.86 50 311S -85702 222.57 20 8 20 8 12 75 311S -85502 34.50 25 10 10 14 50 311S -85552 62.77 12 12 16 63 311S -85602 72.76 16 16 20 75 311S -85652 155.46 20 20 25 75 311S -85702 222.57 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix 2 FLAT Micro-grain K30 3-flute Stub Mills Series 314S Cutter Shank FL OAL Part PRICE MG Dia-D1 Dia-D2 L1 L2 Number £ 260 TiALN 30º HM 3 1 PLAIN 3 2 38 314S -85002 28.39 1.5 3 3 38 314S -85052 28.39 3 21.55 2 Tolerances: Cutter Shank 4 FL OA 314S -85102 PRICE 1.1 - 1.6 6.1 - 6.4 Part 38L Number £ 38 5 3 4 2.5 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 314S -85152 21.55 2.1 - 2.3 4.1 - 5.3 314S -85002 28.39 3 1 3 3 6 2 38 314S -85202 21.55 38 D2 h6 30.48 3.5 4 3 7 3 50 314S -85252 28.39 3.1 - 3.4 1.7 - 1.8 314S -85052 1.5 38 314S -85102 5 4 2 4 3 8 4 38 314S -85302 21.55 50 30.48 D1 9.1 2.5 5 3 9 5 38 314S -85152 30.48 314S -85352 21.55 4.5 50 21.55 314S -85202 5 3 5 3 10 6 50 314S -85402 38.04 38 38.97 314S -85252 50 6 6 3.5 6 4 12 7 50 314S -85452 30.48 30.48 314S -85302 50 L1 8 4 8 4 12 8 50 314S -85502 45.06 10 4.5 10 5 14 9 50 314S -85352 30.48 50 81.83 314S -85552 63 314S -85602 12 5 12 5 16 50 314S -85402 94.99 38.04 10 38.97 75 12 16 6 16 6 20 50 314S -85452 202.93 314S -85652 314S -85702 20 8 20 8 25 50 314S -85502 290.44 45.06 75 12 L2 10 10 14 50 314S -85552 81.83 12 12 16 63 314S -85602 94.99 Modifications 16 16 20 75 314S -85652 202.93 Regrinds, Re coat 20 20 25 75 314S -85702 290.44 Specials D2 manufactured 42 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide General Purpose - Bright Finish 2 Solid Carbide Endmills Bright, TiALN & Radius Centre Cutting End-Mills 30º Helix FLAT Series 411S Micro-grain K30 4-flute Stub Mills 3 MG 260 4 30º HM PLAIN 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Part PRICE Tolerances: Dia-D1 Dia-D2 L1 L2 Number £ 5 D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 1 3 2 38 411S -85000 21.78 D2 h6 3.1 - 3.4 9.1 1.5 3 3 38 411S -85050 21.78 16.46 3 38 2 Part Cutter Shank 4 FL OAL 411S -85100 PRICE 6 Number Dia-D1 Dia-D2 5 L1 L2 411S -85150 16.46 D1 £ 38 2.5 3 3 1 3 3 6 2 38 411S -85000 21.78 411S -85200 38 16.46 1.5 4 3 7 3 38 411S -85050 21.78 411S -85250 3.5 50 23.40 38 4 2 4 3 8 4 50 411S -85100 16.46 411S -85300 23.40 L1 2.5 5 3 9 5 38 411S -85150 16.46 4.5 23.40 50 411S -85350 5 3 5 3 10 6 38 411S -85200 16.46 50 29.16 411S -85400 6 3.5 6 4 12 7 50 411S -85250 23.40 411S -85450 50 29.86 8 4 8 4 12 8 50 411S -85300 23.40 L2 50 411S -85500 34.50 4.5 10 5 14 9 50 411S -85350 23.40 50 10 411S -85550 62.77 12 5 12 5 10 50 411S -85400 29.16 16 411S -85600 63 72.76 29.86 16 6 16 6 12 50 411S -85450 155.46 20 75 411S -85650 20 8 20 8 12 75 411S -85700 222.57 411S -85500 34.50 50 25 10 10 14 50 411S -85550 62.77 12 12 16 63 411S -85600 72.76 16 16 20 75 411S -85650 155.46 20 20 25 75 411S -85700 222.57 D2 Performance Solid Carbide - TiALN 2 Centre Cutting End-Mills 30º Helix FLAT Series 414S Micro-grain K30 4-flute Stub Mills 3 Cutter Shank FL OAL Part PRICE Dia-D1 Dia-D2 L1 L2 Number £ 260 TiALN MG 4 28.39 1 3 2 38 414S -85000 HM PLAIN 30º 1.5 3 3 38 414S -85050 28.39 1.1 - 1.6 6.1 - 6.4 Cutter Shank 4 FL OAL 414S -85100 PRICE Part Tolerances: 3 2 21.55 38 Dia-D1 Dia-D2 L1 L2 Number £ 5 D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 2.5 3 5 38 414S -85150 21.55 3 1 3 3 6 2 38 414S -85200 28.39 414S -85000 38 21.55 D2 h6 3.1 - 3.4 1.7 - 1.8 1.5 4 3 7 3 38 414S -85050 28.39 50 30.48 414S -85250 3.5 4 2 4 3 8 4 38 414S -85100 21.55 6 30.48 50 414S -85300 9.1 D1 2.5 5 3 9 5 38 414S -85150 30.48 414S -85350 4.5 50 21.55 5 3 5 3 10 6 38 414S -85200 21.55 414S -85400 50 38.04 50 6 3.5 6 4 12 7 50 414S -85250 30.48 414S -85450 38.97 8 4 8 4 12 8 50 414S -85300 30.48 414S -85500 45.06 50 L1 4.5 10 5 14 9 50 414S -85350 30.48 50 81.83 10 414S -85550 12 5 12 5 10 50 414S -85400 38.04 414S -85600 16 63 94.99 16 6 16 6 12 50 414S -85450 202.93 38.97 20 75 414S -85650 414S -85500 25 45.06 20 8 20 8 12 50 414S -85700 290.44 L2 75 10 10 14 50 414S -85550 81.83 Modifications 12 12 16 63 414S -85600 94.99 Regrinds, Re coat 16 16 20 75 414S -85650 202.93 Specials 20 20 25 75 414S -85700 290.44 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 43

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Ball Nosed Stub Mills FLAT Series 216S MG 2 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 3 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Number £ 2.1 - 2.3 4.1 - 5.3 1 3 2 38 216S -85005 25.65 D2 h6 38 3 3 1.5 25.65 Cutter Shank FL OAL 216S -85055 PRICE 3.1 - 3.4 9.1 Part 3 4 2 4 38 Number Dia-D1 Dia-D2 L1 L2 216S -85105 20.92 £ D1 2.5 3 5 38 216S -85155 20.92 1 2 216S -85005 3 25.65 38 3 25.65 3 3 216S -85055 38 1.5 3 6 38 216S -85205 26.10 3.5 3 38 216S -85105 4 5 2 4 7 50 216S -85255 29.35 20.92 L1 4 4 8 50 216S -85305 29.35 2.5 3 5 38 216S -85155 20.92 4.5 5 9 50 216S -85355 29.35 6 216S -85205 26.10 3 3 38 6 5 5 10 50 216S -85405 36.57 50 3.5 216S -85255 4 7 29.35 6 6 12 50 216S -85455 37.52 4 4 216S -85305 29.35 8 50 8 4.5 8 12 50 216S -85505 42.32 9 5 50 216S -85355 L2 29.35 10 10 14 50 216S -85555 78.75 5 50 36.57 5 216S -85405 10 12 12 16 63 216S -85605 91.46 12 50 6 216S -85455 6 37.52 16 16 20 75 216S -85655 183.66 216S -85505 8 8 50 12 42.32 20 20 25 75 216S -85705 254.61 10 78.75 216S -85555 14 50 10 12 12 16 63 216S -85605 91.46 16 16 20 75 216S -85655 183.66 20 20 25 75 216S -85705 254.61 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute Ball Nosed Stub Mills FLAT Series 219S FL OAL Shank Part MG Cutter Dia-D2 L1 L2 Number PRICE 260 2 £ Dia-D1 TiALN 30º HM 1 PLAIN 3 2 38 219S -85005 33.46 38 33.46 3 1.5 3 Tolerances: Cutter Shank FL OAL 219S -85055 PRICE 1.1 - 1.6 6.1 - 6.4 Part 3 4 38 2 3 £ Number D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 219S -85105 27.28 2.5 3 5 38 219S -85155 27.28 2.1 - 2.3 4.1 - 5.3 33.46 3 2 38 1 219S -85005 D2 h6 3 3 6 38 219S -85205 34.59 1.5 3 3 38 219S -85055 33.46 3.1 - 3.4 1.7 - 1.8 3.5 38 27.28 3 219S -85105 4 2 4 7 50 219S -85255 38.27 4 D1 4 4 8 50 219S -85305 38.27 9.1 2.5 3 5 38 219S -85155 27.28 4.5 5 9 50 219S -85355 38.27 219S -85205 34.59 38 6 3 3 5 3.5 5 10 50 219S -85405 47.82 5 219S -85255 4 50 38.27 7 L1 6 6 12 50 219S -85455 49.03 4 4 8 50 38.27 219S -85305 8 9 219S -85355 4.5 8 12 50 219S -85505 55.30 50 38.27 5 10 50 6 5 10 14 50 219S -85555 102.81 5 10 47.82 219S -85405 12 12 16 63 219S -85605 119.30 12 49.03 50 6 6 219S -85455 16 16 20 75 219S -85655 239.69 55.30 8 12 219S -85505 8 50 L2 20 20 25 75 219S -85705 332.29 50 14 10 10 219S -85555 102.81 12 12 16 63 219S -85605 119.30 Modifications 16 16 20 75 219S -85655 239.69 Regrinds, Re coat 20 20 25 75 219S -85705 332.29 Specials D2 manufactured 44 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix FLAT Series 316S Micro-grain K30 3-flute Ball Nosed Stub Mills 2 MG 260 3 30º HM PLAIN 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE Tolerances: 4 Dia-D1 Dia-D2 L1 L2 Number £ D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 1 3 2 38 316S -85006 25.65 D2 h6 25.65 1.5 38 3 Part 3.1 - 3.4 9.1 Cutter Shank 3 FL OAL 316S -85056 PRICE 3D2 L1 L2 £ 2D1 Number Dia- Dia- 4 38 316S -85106 20.92 D1 5 2.5 3 5 38 316S -85156 20.92 316S -85006 3 2 1 38 25.65 3 3 316S -85056 1.5 3 6 38 316S -85206 26.10 3 38 25.65 3.5 4 7 50 316S -85256 29.35 6 316S -85106 2 38 4 3 20.92 4 38 L1 2.5 4 8 50 316S -85306 29.35 20.92 5 316S -85156 3 4.5 5 9 50 316S -85356 29.35 3 38 6 316S -85206 3 26.10 5 3.5 5 10 50 316S -85406 36.57 50 316S -85256 4 7 29.35 6 6 12 50 316S -85456 37.52 4 8 316S -85306 4 50 29.35 8 5 316S -85356 4.5 8 12 50 316S -85506 42.32 L2 50 9 29.35 10 10 14 50 316S -85556 78.75 316S -85406 10 50 5 5 36.57 12 12 16 63 316S -85606 91.46 6 12 316S -85456 6 50 37.52 16 16 20 75 316S -85656 183.66 316S -85506 50 12 8 8 42.32 20 20 25 75 316S -85706 254.61 14 10 50 10 78.75 316S -85556 12 12 16 63 316S -85606 91.46 16 16 20 75 316S -85656 183.66 20 20 25 75 316S -85706 254.61 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix FLAT Series 319S Micro-grain K30 3-flute Ball Nosed Stub Mills 2 Cutter Shank FL OAL Part PRICE TiALN £ 260 Dia-D1 Dia-D2 L1 L2 Number MG 3 PLAIN HM 30º 1 3 2 38 319S -85006 33.46 38 3 1.1 - 1.6 6.1 - 6.4 Cutter Shank 3 FL OAL 319S -85056 PRICE 33.46 1.5 Part Tolerances: 38 4 2 3 Dia-D1 Dia-D2 L1 L2 319S -85106 27.28 4 £ Number D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 2.5 3 5 38 319S -85156 27.28 38 2 319S -85006 33.46 1 3 D2 h6 3 3.1 - 3.4 1.7 - 1.8 1.5 3 6 38 319S -85206 34.59 3 319S -85056 38 3 33.46 3.5 4 7 50 319S -85256 38.27 5 2 4 3 38 319S -85106 27.28 9.1 D1 4 2.5 4 8 50 319S -85306 38.27 5 3 319S -85156 27.28 38 4.5 5 9 50 319S -85356 38.27 3 38 319S -85206 3 6 34.59 5 4 3.5 5 10 50 319S -85406 47.82 6 319S -85256 7 50 38.27 6 6 12 50 319S -85456 49.03 8 319S -85306 50 4 38.27 4 L1 8 9 319S -85356 5 50 4.5 8 12 50 319S -85506 55.30 38.27 10 10 14 50 319S -85556 102.81 10 5 319S -85406 5 47.82 50 12 12 16 63 319S -85606 119.30 6 12 6 319S -85456 50 49.03 16 16 20 75 319S -85656 239.69 50 319S -85506 8 8 12 55.30 20 20 25 75 319S -85706 332.29 10 10 14 319S -85556 102.81 50 Modifications 12 12 16 63 319S -85606 119.30 L2 Regrinds, Re coat 16 16 20 75 319S -85656 239.69 Specials 20 20 25 75 319S -85706 332.29 D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 45

Solid Carbide Endmills Bright, TiALN & Radius 2 Bright Finish Solid Carbide General Purpose - Bright Finish Centre Cutting End-Mills 30º Helix 3 Micro-grain K30 4-flute Ball Nosed Stub Mills FLAT Series 416S Bright Finish MG 4 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 6.4 5 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Number £ 1 3 2 38 416S -85004 25.65 2.1 - 2.3 4.1 - 5.3 D2 h6 1.5 3 3 38 416S -85054 25.65 3.1 - 3.4 9.1 Part 4 6 2 Cutter Shank FL OAL 416S -85104 PRICE 3 38 20.92 D1 Number Dia-D1 Dia-D2 L1 L2 416S -85154 20.92 £ 2.5 38 5 3 38 416S -85204 3 1 3 3 6 2 38 416S -85004 25.65 26.10 416S -85254 3.5 50 1.5 4 3 7 3 38 416S -85054 25.65 29.35 4 2 4 3 8 4 38 416S -85104 20.92 50 416S -85304 29.35 L1 416S -85354 4.5 50 2.5 5 3 9 5 38 416S -85154 20.92 29.35 6 416S -85404 50 5 3 5 3 10 38 416S -85204 26.10 36.57 6 3.5 6 4 12 50 416S -85254 29.35 7 50 416S -85454 37.52 8 4 8 4 12 50 416S -85304 29.35 50 416S -85504 8 42.32 9 4.5 10 14 50 416S -85354 29.35 10 5 416S -85554 50 78.75 L2 416S -85604 12 12 10 50 416S -85404 36.57 5 63 5 16 91.46 16 16 12 50 416S -85454 183.66 20 416S -85654 6 6 75 37.52 25 416S -85704 75 8 8 20 20 12 50 416S -85504 254.61 42.32 10 10 14 50 416S -85554 78.75 12 12 16 63 416S -85604 91.46 16 16 20 75 416S -85654 183.66 20 20 25 75 416S -85704 254.61 D2 2 Performance Solid Carbide - TiALN Centre Cutting End-Mills 30º Helix 3 Micro-grain K30 4-flute Ball Nosed Stub Mills FLAT Series 419S Cutter Shank FL OAL Part PRICE MG Dia-D1 Dia-D2 L1 L2 Number £ 260 TiALN 30º HM 4 1 PLAIN 3 2 38 419S -85004 33.46 1.5 3 3 38 419S -85054 33.46 Part 3 4 2 Tolerances: Cutter Shank FL OAL 419S -85104 PRICE 1.1 - 1.6 6.1 - 6.4 38 27.28 Number £ D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 419S -85154 27.28 2.1 - 2.3 4.1 - 5.3 38 5 2.5 5 3 34.59 38 3 1 3 3 6 2 38 419S -85004 33.46 419S -85204 D2 h6 50 419S -85254 3.5 1.5 4 3 7 3 38 419S -85054 33.46 3.1 - 3.4 1.7 - 1.8 38.27 6 4 2 4 3 8 4 38 419S -85104 27.28 38.27 419S -85304 50 D1 9.1 4.5 2.5 5 3 9 5 38 419S -85154 27.28 419S -85354 50 38.27 419S -85404 5 3 5 3 10 38 419S -85204 34.59 50 47.82 6 419S -85454 7 49.03 3.5 6 4 12 50 419S -85254 38.27 6 50 419S -85504 50 8 4 8 4 12 50 419S -85304 38.27 8 55.30 L1 5 10 9 4.5 10 14 50 419S -85354 102.81 38.27 50 419S -85554 5 12 12 10 50 419S -85404 119.30 419S -85604 5 63 16 47.82 20 75 16 16 12 50 419S -85454 239.69 6 419S -85654 49.03 6 25 8 419S -85704 55.30 8 20 20 12 50 419S -85504 332.29 75 L2 10 10 14 50 419S -85554 102.81 12 12 16 63 419S -85604 119.30 Modifications 16 16 20 75 419S -85654 239.69 Regrinds, Re coat Tolerance Shank H6 20 20 25 75 419S -85704 332.29 Specials Tolerance Shank H6 D2 manufactured 46 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix FLAT Series 251 Micro-grain K30 2-flute DE Stub MG 260 2 30º HM PLAIN Tolerances: 1.1 - 1.6 6.1 - 8.3 Cutter Shank FL OAL Part PRICE 3 Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm £ 2.1 - 2.3 4.1 - 5.3 2 3 4 38 251 -11503 29.86 D2 h6 3.1 - 3.4 9.1 2.5 3 5 38 251 -11504 29.86 6 38 27.20 3 3 Cutter Shank FL OAL 251 -11505 PRICE D1 4 Part Number Dia-D1 Dia-D2 L1 L2 251 -11506 37.52 £ 50 7 4 3.5 4 2 4 3 8 4 50 251 -11507 29.86 38 36.46 251 -11503 29.86 251 -11504 5 2.5 5 3 10 5 50 251 -11509 42.67 5 38 L1 6 3 6 3 12 6 63 251 -11505 27.20 38 49.88 251 -11510 64.85 251 -11506 50 8 3.5 8 4 12 7 63 251 -11512 37.52 36.46 50 10 4 10 4 12 8 70 251 -11514 99.03 6 251 -11507 10 75 251 -11516 12 5 12 5 16 50 251 -11509 123.94 42.67 6 6 12 63 251 -11510 49.88 8 8 12 63 251 -11512 64.85 10 10 12 70 251 -11514 99.03 L2 12 12 16 75 251 -11516 123.94 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix Series 259 Micro-grain K30 2-flute DE Stub FLAT Cutter Shank FL OAL Part PRICE £ Dia-D1 Dia-D2 L1 L2 Number MG 260 TiALN 2 2 3 4 38 259 -11503 HM PLAIN 49.21 30º 2.5 3 5 38 259 -11504 49.21 1.1 - 1.6 6.1 - 6.4 PRICE Tolerances: 3 6 3 38 Part Cutter Shank FL OAL 259 -11505 44.71 3 £ 3.5 Number 4D2 L1 L2 D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 Dia-D1 Dia- 7 50 259 -11506 61.76 4 2 4 3 8 4 38 259 -11503 62.01 259 -11507 50 49.21 D2 h6 3.1 - 3.4 1.7 - 1.8 5 2.5 5 3 10 5 50 259 -11509 72.56 4 49.21 38 259 -11504 44.71 259 -11505 38 9.1 6 3 6 3 12 6 63 259 -11510 84.78 D1 259 -11512 63 8 3.5 8 4 12 7 50 259 -11506 110.21 61.76 259 -11507 50 10 4 10 4 12 8 70 259 -11514 168.21 62.01 10 75 259 -11509 12 5 12 5 16 50 259 -11516 210.64 5 72.56 L1 6 6 12 63 259 -11510 84.78 8 8 12 63 259 -11512 110.21 10 10 12 70 259 -11514 168.21 6 12 12 16 75 259 -11516 210.64 Modifications L2 Regrinds, Re coat Specials D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 47

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish 2 FLAT Centre Cutting Slot-Drills 30º Helix Micro-grain K30 3-flute DE Stub Series 351 MG 3 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 4 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 Number £ 2.1 - 2.3 4.1 - 5.3 2 3 4 38 351 -11603 29.86 D2 h6 Cutter Shank 5 FL OAL 351 -11604 PRICE 3.1 - 3.4 9.1 Part 2.5 3 38 29.86 Dia-D1 Dia-D2 L1 L2 351 -11605 27.20 Number £ 3 38 6 D1 5 3 3.5 2 4 3 7 4 38 351 -11603 29.86 50 351 -11606 37.52 4 2.5 4 3 8 5 38 351 -11604 29.86 50 351 -11607 36.46 6 5 3 5 3 10 6 38 351 -11605 27.20 50 42.67 351 -11609 L1 6 3.5 6 4 12 7 50 351 -11606 37.52 351 -11610 63 49.88 8 4 8 4 12 8 50 351 -11607 36.46 351 -11612 63 64.85 10 5 10 5 10 50 351 -11609 42.67 351 -11614 12 70 99.03 12 6 12 6 12 63 351 -11610 123.94 49.88 351 -11616 16 75 8 8 12 63 351 -11612 64.85 10 10 12 70 351 -11614 99.03 L2 12 12 16 75 351 -11616 123.94 D2 Performance Solid Carbide - TiALN Centre Cutting Slot-Drills 30º Helix 2 FLAT Micro-grain K30 3-flute DE Stub Series 359 MG Cutter Shank FL OAL Part PRICE 260 3 TiALN 30º HM Dia-D1 PLAIN Dia-D2 L1 L2 Number £ 2 3 4 38 359 -11603 49.21 Part Tolerances: Cutter Shank 5 FL OAL 359 -11604 PRICE 1.1 - 1.6 6.1 - 6.4 2.5 38 49.21 3 Number £ 4 3 3 38 D1 +0.00/-0.051mm Dia-D1 Dia-D2 L1 L2 359 -11605 44.71 2.1 - 2.3 4.1 - 5.3 6 3.5 2 4 3 7 4 38 359 -11603 49.21 61.76 359 -11606 50 D2 h6 4 2.5 4 3 8 5 38 359 -11604 49.21 3.1 - 3.4 1.7 - 1.8 62.01 359 -11607 50 55 3 5 3 10 6 38 359 -11605 44.71 72.56 359 -11609 50 D1 9.1 6 3.5 6 4 12 7 50 359 -11606 61.76 84.78 63 359 -11610 62.01 8 4 8 4 12 8 50 359 -11607 110.21 359 -11612 63 610 5 10 5 10 50 359 -11609 168.21 72.56 359 -11614 12 70 L1 12 6 12 6 12 63 359 -11610 210.64 84.78 16 75 359 -11616 8 8 12 63 359 -11612 110.21 10 10 12 70 359 -11614 168.21 12 12 16 75 359 -11616 210.64 Modifications L2 Regrinds, Re coat Specials D2 manufactured 48 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk

Solid Carbide General Purpose - Bright Finish 2 Solid Carbide Endmills Bright, TiALN & Radius Centre Cutting End-Mills 30º Helix FLAT Series 451 Micro-grain K30 4-flute DE Stub 3 MG 260 4 30º HM PLAIN 1.1 - 1.6 6.1 - 6.4 Cutter Shank FL OAL Part PRICE Tolerances: 5 £ Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 2 3 4 38 451 -11703 29.86 D2 h6 3.1 - 3.4 9.1 2.5 3 5 38 451 -11704 29.86 Cutter Shank FL OAL 451 -11705 PRICE 6 Part 3 6 38 3 27.20 Dia-D1 Dia-D2 L1 L2 451 -11706 37.52 D1 £ Number 4 7 50 3.5 2 3 4 38 451 -11703 29.86 50 4 8 4 451 -11707 36.46 2.5 3 10 38 451 -11704 29.86 5 5 42.67 50 5 451 -11709 L1 6 3 3 12 38 451 -11705 27.20 6 451 -11710 49.88 63 6 3.5 4 12 50 451 -11706 37.52 7 451 -11712 64.85 8 63 8 4 4 8 99.03 451 -11714 10 10 12 50 451 -11707 36.46 70 5 5 42.67 16 75 451 -11716 12 12 10 50 451 -11709 123.94 6 6 12 63 451 -11710 49.88 8 8 12 63 451 -11712 64.85 10 10 12 70 451 -11714 99.03 L2 12 12 16 75 451 -11716 123.94 D2 Performance Solid Carbide - TiALN 2 Centre Cutting End-Mills 30º Helix Series 459 Micro-grain K30 4-flute DE Stub 3 FLAT Cutter Shank FL OAL Part PRICE £ Dia-D1 Dia-D2 L1 L2 Number MG 260 TiALN 4 HM 2 3 4 38 459 -11703 30º 49.21 PLAIN 2.5 3 5 38 459 -11704 49.21 1.1 - 1.6 6.1 - 6.4 Cutter Shank 6 FL OAL 459 -11705 PRICE Part Tolerances: 3 3 38 44.71 5 £ Dia-D1 Dia-D2 L1 L2 Number D1 +0.00/-0.051mm 2.1 - 2.3 4.1 - 5.3 3.5 4 7 50 459 -11706 61.76 2 3 4 38 459 -11703 49.21 50 4 62.01 8 4 459 -11707 D2 h6 5 5 5 3.1 - 3.4 1.7 - 1.8 2.5 3 10 38 459 -11704 49.21 459 -11709 50 72.56 3 3 12 38 459 -11705 44.71 6 6 84.78 63 6 6 459 -11710 9.1 D1 61.76 7 3.5 4 12 50 459 -11706 110.21 8 459 -11712 63 8 62.01 4 4 8 70 10 10 12 50 459 -11707 168.21 459 -11714 5 5 72.56 459 -11716 12 12 10 50 459 -11709 210.64 75 16 6 6 12 63 459 -11710 84.78 L1 8 8 12 63 459 -11712 110.21 10 10 12 70 459 -11714 168.21 12 12 16 75 459 -11716 210.64 Modifications L2 Regrinds, Re coat Specials D2 manufactured Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk 49

Solid Carbide Endmills Bright, TiALN & Radius Solid Carbide General Purpose - Bright Finish Centre Cutting Slot-Drills 30º Helix Micro-grain K30 2-flute DE Stub FLAT Series 251 MG 2 260 30º HM PLAIN Tolerances: Cutter Shank FL OAL Part PRICE 1.1 - 1.6 6.1 - 8.3 3 D1 +0.00”-0.002” Dia-D1 Dia-D2 L1 L2 Number £ 1/16\" 1/8\" 1/8\" 1-1/2\" 251 -01504 30.71 2.1 - 2.3 4.1 - 5.3 D2 h6 3/32\" 1/8\" 3/16\" 1-1/2\" 251 -01506 28.93 9.1 4 Cutter Shank 1/4\" OAL 251 -01508 PRICE 3.1 - 3.4 1-1/2\" FL 1/8\" Part 1/8\" 27.20 Dia-D1 Dia-D2 L1 L2 251 -01510 37.67 D1 Number £ 5/16\" 3/16\" 5/32\" 2\" 1/8\" 1/16\" 3/16\" 1/8\" 1-1/2\" 251 -01504 30.71 2\" 3/8\" 3/16\" 36.46 251 -01512 5 1/8\" 3/16\" 1-1/2\" 251 -01506 28.93 3/32\" 251 -01514 2-1/2\" 1/4\" 51.44 1/2\" 7/32\" L1 1/8\" 1/8\" 1/4\" 1-1/2\" 251 -01508 27.20 1/2\" 51.59 1/4\" 1/4\" 2-1/2\" 251 -01516 5/32\" 3/16\" 5/16\" 2-1/2\" 251 -01510 37.67 2\" 5/16\" 5/16\" 1/2\" 251 -01520 65.96 6 3/8\" 3/16\" 3/8\" 2-1/2\" 251 -01512 36.46 3/16\" 2\" 3/8\" 76.77 251 -01524 1/2\" 51.44 7/32\" 1/4\" 1/2\" 2-1/2\" 251 -01514 130.31 1/2\" 251 -01532 1/2\" 3\" 5/8\" 1/4\" 1/4\" 1/2\" 2-1/2\" 251 -01516 51.59 5/16\" 5/16\" 1/2\" 2-1/2\" 251 -01520 65.96 L2 3/8\" 3/8\" 1/2\" 2-1/2\" 251 -01524 76.77 1/2\" 1/2\" 5/8\" 3\" 251 -01532 130.31 D2 2 Solid Carbide General Purpose - Bright Finish Centre Cutting End-mills 30º Helix 3 FLAT Micro-grain K30 4-flute DE Stub Series 451 Cutter Shank FL OAL Part PRICE Dia-D1 MG 4 Dia-D2 L1 L2 Number £ 260 30º HM 1/16\" PLAIN 1/8\" 1/8\" 1-1/2\" 451 -01704 30.71 3/32\" 1/8\" 3/16\" 1-1/2\" 451 -01706 28.93 Part FL OAL Tolerances: Cutter Shank 1/4\" 1-1/2\" 451 -01708 PRICE 1.1 - 1.6 6.1 - 6.4 1/8\" 27.20 1/8\" Dia-D1 £ Number D1 +0.00”-0.002” 5 Dia-D2 L1 L2 451 -01710 37.67 2.1 - 2.3 4.1 - 5.3 5/32\" 3/16\" 2\" 5/16\" 1/8\" 1/16\" 3/16\" 1/8\" 1-1/2\" 451 -01704 30.71 2\" 36.46 451 -01712 3/16\" 3/8\" D2 h6 3/32\" 1/8\" 3/16\" 1-1/2\" 451 -01706 28.93 3.1 - 3.4 9.1 451 -01714 1/2\" 2-1/2\" 7/32\" 1/4\" 6 1/8\" 1/8\" 1/4\" 1-1/2\" 451 -01708 51.44 27.20 2-1/2\" 451 -01716 1/4\" 1/2\" 51.59 1/4\" D1 2\" 5/32\" 3/16\" 5/16\" 2-1/2\" 451 -01710 37.67 65.96 5/16\" 451 -01720 1/2\" 5/16\" 2\" 3/16\" 3/16\" 3/8\" 2-1/2\" 451 -01712 36.46 3/8\" 3/8\" 451 -01724 1/2\" 76.77 51.44 5/8\" 3\" 1/2\" 1/2\" 451 -01732 L1 7/32\" 1/4\" 1/2\" 2-1/2\" 451 -01714 130.31 1/4\" 1/4\" 1/2\" 2-1/2\" 451 -01716 51.59 5/16\" 5/16\" 1/2\" 2-1/2\" 451 -01720 65.96 3/8\" 3/8\" 1/2\" 2-1/2\" 451 -01724 76.77 1/2\" 1/2\" 5/8\" 3\" 451 -01732 130.31 L2 D2 manufactured 50 Tel: 01509 610300 • Fax: 01509 610400 • Email: [email protected] • www.merlintools.co.uk