ProSafe_Catalogue_20-21

PSWAPOEFRE&TKYPLACE ATALOGU 2020/21

PROSAFE stands for SAFETY AT WORK We have 3 Core Beliefs that we stand by We believe everyone should be SAFE and PROTECTED at work SAFETY should be everyone’s #1 PRIORITY Your PPE is the most important thing you will wear all day

PERSONAL PROTECTIVE EQUIPMENT 4 24 EYE PROTECTION 32 HEAD & FACE PROTECTION 56 HAND PROTECTION 64 RESPIRATORY PROTECTION HEARING PROTECTION WORKPLACE SAFETY SIGNAGE 70 ENVIRONMENT PROTECTION 104 TRAFFIC MANAGEMENT 124 PROSAFE Your Trusted Safety Brand



EYE PROTECTION Safety glasses are designed to protect your eyes from the risk of injury. All PROSAFE safety eyewear meets AS/NZS 1337.1.2010 for Medium Impact Protection. 5

PROSAFE through its parent company Blackwoods is a proud partner of THE FRED HOLLOWS FOUNDATION’S INDIGENOUS AUSTRALIA PROGRAM. Almost $3,000,000 donated since 2008 It is an honour to support the Fred Hollows Foundation and first hand see the impact our donation has made in peoples lives. Aboriginal and Torres Strait Islander adults are three times more likely to go blind than non-Indigenous Australians, yet 94% of their vision loss is preventable or treatable. The Fred Hollows Foundation works to put an end to these alarming figures by focusing on education, screening and treatment. The Foundation is working hard to achieve the following: 1. Deliver surgery and medical treatment for cataract, diabetic retinopathy and the elimination of trachoma 2. Increase access to services for patients in remote communities. 3. Coordinate and improve outreach services so everyone who needs medical care gets it. 4. Provide training and support to Aboriginal and Torres Strait Islander health staff. 10% of the profit of every pair of safety glasses sold in Australia is donated to the program. Learn more about our partnership here https://www.hollows.org/au/corporate-partnerships/blackwoods



EYE PROTECTION IMPACT RESISTANCE High Impact and Very High Impact is applicable to visors only. All eye protection is tested to be capable of withstanding impact Visors are the only eye/face products from a specified weight ball without cracking, detaching or that can be rated to this level of protection. dislodging, breaking or coming into contact with the eye or the For faceshields and visors see head protection. head. AS/NZS test requirements categorise impact resistance into four categories: Low Impact Medium Impact High Impact Very High Impact Tested full face on at 12m/sec Tested front on, as well as Tested front on, as well Tested front on, as well side on at 45m/sec as side on at 120m/sec as side on at 190m/sec Protective devices do not provide unlimited protection. This information is intended to aid in identifying and selecting the types of eye and face protectors that are available, their capabilities and limitations for the hazards listed. This guide is not intended to be the sole reference in selecting the proper eye and face protector. HAZARD PRIMARY PROTECTION SECONDARY PROTECTION IMPACT – CHIPPING, GRINDING, MACHINING, MASONRY WORK, RIVETING, & SANDING Flying fragments, objects, Safety spectacles Faceshield worn large chips, particles, sand, over spectacles dirt, etc. Positive seal safety or goggles spectacles (POS) (dual protection) Goggles with direct or indirect ventilation HEAT – FURNACE OPERATIONS: POURING, CASTING, HOT DIPPING, GAS CUTTING, & WELDING Hot sparks Faceshield worn Safety spectacles Splash from molten metal over spectacles Positive seal safety High temperature exposure or goggles spectacles (POS) (dual protection) Goggles with direct or indirect ventilation CHEMICAL – ACID AND CHEMICAL HANDLING, DEGREASING, PLATING Goggles with indirect ventilation Safety spectacles (eye cup or cover type) Splash and irritating mists Faceshield worn over Positive seal safety spectacles or goggles spectacles (POS) (dual protection) DUST – WOODWORKING, BUFFING, GENERAL DUSTY CONDITIONS Nuisance dust Positive seal safety Atmospheric conditions and spectacles (POS) the restricted ventilation of a protector Goggles with direct can cause lenses to fog. or indirect ventilation Frequent cleaning may be required 8 WWW.PROSAFE.COM.AU

STANDARDS AND CERTIFICATION SAI GLOBAL All PROSAFE Safety Glasses are Medium impact rated and certified to Australian and New Zealand standards AS/NZS 1337.1 Face shields provide High Impact and Very High impact ratings if extra protection is needed. LENS COLOUR GUIDE Lens Colour Clear Clear/Silver Flash Amber Light Blue Light Brown Smoke Features /Benefits Provides protection Slightly tinted mir- Enhances contrast Enhances contrast Provides true Provides protection without impacting ror finish reduces in poorly lit working in poorly lit working colour definition from sun glare, optical clarity sun glare, ideal conditions, to help conditions, plus by reducing glare reduces risk of eye Lens ocular when working be- make the environ- helps to reduce while enhancing strain and fatigue. category 0. Allows tween indoors and ment look brighter. glare from artificial colour contrast. Inc Smoke/Blue 80-100% of light to outdoor Blocks out blue light such as halo- Lens ocular cat- grey, Smoke/Blue filter through. Lens ocular cate- light. gen and fluores- egory 2 Medium flash gory 1 Slight Tint. Lens ocular cent lights Tint: Allows 18-43% Lens ocular cate- Allows 43-80% category 0. Allows Lens ocular of light to filter gory 3 Dark Tint: Al- of light to filter 80-100% of light to category 0. Allows through. lows 8-18% of light through. filter through. 80-100% of light to to filter through. filter through. LENS COATINGS GUIDE EYE PROTECTION Anti-Fog/ Anti-scratch Hard Coat coating on both Highest level scratch Light Mirror (Flash): a Polarised lens eliminates coating on both sides sides provides a higher lev- resistance for superior pro- light reflective coating unwanted glare from re- improves comfort and el of scratch resistance to tection against scratches. applied over a Hard Coat flective surfaces, improving wearability by providing protect the lens, increase Complaint to European anti-scratch lens treatment visual clarity and comfort resistance to fogging and visual comfort and extend standard EN166 Personal to reduce the impact of minor scratches the life of the glasses Eye Protection. sun glare. PROSAFE Your Trusted Safety Brand 9

EYE PROTECTION FRAMELESS Frameless safety glasses are super lightweight and ergonomically designed for all day comfort. The wrap around design provides excellent eye area coverage and protection. Made using a polycarbonate lens that filters 99.9% of harmful UV rays, these glasses are suitable for a wide variety of industries. All PROSAFE safety glasses are medium impact resistant and certified to AS/NZS 1337.1. 10 WWW. PROSAFE.COM.AU

FRAMELESS Clear ECONOMY SPECTACLES -12 PACK 0082 3539 A lightweight frameless design, provides unobstructed line of sight. Name Suitable for general purpose and visitor’s glasses. Frame Colour Lens Colour • Hard coat lens finish for high level scratch resistance Lens Coating Part number Economy Spectacles 12 pack Smoke Clear 0082 3556 Clear Economy Spectacles 12 pack Hard coat (Anti-scratch) Smoke 0082 3539 Smoke Hard coat (Anti-scratch) 0082 3556 Flexible temple arm tips Light blue BEARKAT 0657 3380 Our most popular frameless design, a lightweight wrap around style with a close fit for excellent ocular area coverage. Featuring flexible temple arm tips for improved comfort. • Anti-fog/Anti-scratch lens coating for fog resistance and resistance to minor scratches Clear Smoke/Grey Smoke/Blue flash EYE PROTECTION 0657 3312 0657 3363 0675 0197 Name Bearkat Bearkat Bearkat Bearkat Frame Colour Light blue Clear Smoke/Grey Smoke/Blue flash Lens Colour Light blue Clear Smoke/Grey Smoke/Blue flash Lens Coating Anti-fog/Anti-scratch Anti-fog/Anti-scratch Anti-fog/Anti-scratch Part number 0657 3380 0657 3312 0657 3363 Mirror 0675 0197 PROSAFE Your Trusted Safety Brand 11

EYE PROTECTION CHECKLITE A lightweight frameless design, provides unobstructed line of sight. Perfect for everyday use. • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches Clear Checklite Amber Smoke/Grey 0675 0214 Clear 0708 8871 0675 0231 Clear Name Checklite Checklite Frame Colour Anti-fog/Anti-scratch Translucent amber Translucent smoke Lens Colour 0675 0214 Lens Coating Amber Smoke/Grey Part number Anti-fog/Anti-scratch Anti-fog/Anti-scratch Amber 0708 8871 0675 0231 0708 8871 CHECKLITE II Name Frame Colour A lightweight frameless design, provides unobstructed line of sight. Lens Colour Perfect for everyday use. Lens Coating Part number • Hard coat lens finish for high level scratch resistance Smoke/Grey blue Checklite Clear Smoke/Grey 0244 0817 Translucent amber 0340 9035 0340 9052 Amber Checklite Checklite Hard coat (Anti-scratch) Clear Translucent smoke Clear 0340 9069 Smoke/Grey Hard coat (Anti-scratch) Hard coat (Anti-scratch) Rubber pads for 0340 9035 comfort and grip 0340 9052 HARRIER A lightweight ergonomic design with co-moulded Thermoplastic Rubber (TPR) temple arm tips and nose pads for all day comfort and grip. Select from • Extreme lens coating for superior level scratch resistance • Mirror coating to reduce sun glare Name Clear Harrier Clear/Silver flash Smoke/Blue flash Frame Colour 0244 0800 Clear 0244 0851 0244 0834 Lens Colour Clear Lens Coating Harrier Extreme (Anti-scratch) Harrier Harrier Part number Translucent smoke 0244 0800 Clear Translucent smoke Smoke/Grey blue Clear/Silver flash Smoke/Blue flash Extreme (Anti-scratch) Mirror 0244 0851 Mirror 0244 0817 0244 0834 12 WWW.PROSAFE.COM.AU

FRAMELESS Rubber pads for CHECKMATE comfort and grip Lightweight ergonomic design with Thermoplastic Rubber (TPR) nose and temple arm tips for all day comfort and grip. Wrap around style for close fit and excellent ocular area coverage. Smoke/Grey Clear Smoke mirror 0413 2248 0413 2129 0413 2316 Name Checkmate Checkmate Checkmate Frame Colour Black Black Black Lens Colour Clear Lens Coating Smoke/Grey Smoke mirror Part number Anti-fog/Anti-scratch Anti-fog/Anti-scratch Mirror 0413 2129 0413 2248 0413 2316 Flexible IBIS temple arm tips A lightweight ergonomic design with flexible temple arm tips for all day comfort. Wrap around style provides unobstructed line of sight, and excellent ocular area coverage. Light brown/silver flash Ibis Clear Smoke grey/silver flash 0228 8650 Translucent smoke 0193 6937 0193 6954 Light brown/silver flash Name Ibis Ibis Frame Colour Mirror Clear Translucent smoke Lens Colour 0228 8650 Clear Smoke grey/silver flash Lens Coating Anti-fog/Anti-scratch Part number 0193 6937 Mirror 0193 6954 Clear KITE 0244 0919 A modern design with excellent ocular area coverage. Rubber temple arms and PVC nose pads for all day comfort and grip. Select from Extreme, Hard Coat, Anti-fog/Anti-scratch or Mirror lens treatments. Clear Smoke/Grey blue Smoke/Blue flash Clear/Silver flash EYE PROTECTION 0195 9989 0196 0006 0196 0023 0244 0902 Name Kite Kite Kite Kite Kite Frame Colour Gloss grey Gloss black Gloss black Gloss black Translucent brown Lens Colour Smoke/Grey blue Smoke/Blue flash Clear/Silver flash Lens Coating Clear Clear Hard coat (Anti-scratch) Part number Extreme (Anti-scratch) Anti-fog/Anti-scratch 0196 0006 Mirror Mirror 0196 0023 0244 0902 0244 0919 0195 9989 PROSAFE Your Trusted Safety Brand 13

EYE PROTECTION HALF-FRAME Clear EGRET 0340 8491 Designed to look smart with a half frame, these lightweight ergonomic design glasses feature a co-moulded Thermoplastic Rubber (TPR) temple arm tips and nose pads for all day comfort and grip. Name Egret Smoke/Grey Blue Clear/Silver flash Frame Colour Clear 0340 8508 0340 8525 Lens Colour Clear Lens Coating Hard coat (Anti-scratch) Egret Egret Part number 0340 8491 Translucent smoke Clear Smoke/Grey blue Clear/Silver flash Hard coat (Anti-scratch) Mirror 0340 8525 0340 8508 PEREGRINE Black half frame lightweight ergonomic glasses, featuring a co-moulded Thermoplastic Rubber (TPR) temple arm tips and nose pads for all day comfort and grip. Amber 0244 0868 Clear Smoke/Grey blue Clear/Silver flash Light brown 0196 0040 0196 0057 0244 0885 0228 8667 Name Peregrine Peregrine Peregrine Peregrine Peregrine Frame Colour Matt black Matt black Matt black Translucent smoke Matt brown Lens Colour Smoke/Grey blue Clear/Silver flash Light brown Lens Coating Amber Clear Hard coat (Anti-scratch) Hard coat (Anti-scratch) Part number Hard coat (Anti-scratch) Anti-fog/Anti-scratch 0196 0057 Mirror 0228 8667 0196 0023 0244 0868 0196 0040 14 WWW.PROSAFE.COM.AU

HALF-FRAME Comfortable GRIFFON nose pad Clean smart design, these lightweight ergonomic design glasses Clear feature a co-moulded Thermoplastic Rubber (TPR) temple arm tips 0196 0074 and nose pads for all day comfort and grip. Name Smoke/Grey Frame Colour 0196 0091 Lens Colour Lens Coating Griffon Griffon Part number Matt black Matt black Smoke/Grey Clear/Silver flash Clear Hard coat (Anti-scratch) 0675 0282 Anti-fog/Anti-scratch 0196 0091 Name 0196 0074 Frame Colour Lens Colour KLONDIKE Lens Coating Part number Black half frame lightweight ergonomic glasses, featuring a co-moulded Thermoplastic Rubber (TPR) temple arm tips Smoke/Grey and nose pads for all day comfort and grip. 0773 6503 Klondike Clear Smoke/Grey Matt black 0675 0248 0675 0265 Clear/Silver flash Klondike Klondike Mirror Matt black Matt black 0675 0282 Smoke/Grey blue Clear Anti-fog/Anti-scratch Mirror 0675 0282 0675 0248 LAW Stylish lightweight ergonomic glasses, featuring a co-moulded Thermoplastic Rubber (TPR) temple arm tips and nose pads for all day comfort and grip. Plus metal free hinge design for environments where conductivity may be a hazard. Name Clear Law Smoke/Blue flash Clear/Silver flash EYE PROTECTION Frame Colour 0773 6486 Clear 0773 6520 0773 6537 Lens Colour Clear Lens Coating Law Anti-fog/Anti-scratch Law Law Part number Translucent smoke 0773 6486 Translucent smoke Clear Smoke/Blue flash Clear/Silver flash Smoke/Grey Mirror Hard coat (Anti-scratch) Mirror 0773 6537 0773 6520 0773 6503 PROSAFE Your Trusted Safety Brand 15

EYE PROTECTION FULL FRAME Clear HAWK  0193 6971 Stylish full frame design with Thermoplastic Rubber (TPR) temple arm and nose pads for all day comfort and grip. Polarised option available for added protection from glare from reflective surfaces. Name Hawk  Smoke/Grey Smoke/Polarised Frame Colour Clear 0193 6988 0193 7005 Lens Colour Clear Lens Coating Anti-fog/Anti-scratch Hawk  Hawk  Part number 0193 6971 Clear Gunmetal Smoke/Grey Smoke/Polarised Hard coat (Anti-scratch) Hard coat (Anti-scratch) 0193 6988 0193 7005 ATACAMA Modern frames with tinted and polarised lens. Designed to reduce sun glare and unwanted glare from reflective surfaces, to improve visual clarity and comfort. Rubber pads on arms and nose bridge for comfort and grip. • Hard coat lens finish for high level scratch resistance Smoke/Polarised Atacama Light brown/Polarised 0228 8701 Matt black 0250 2493 Smoke/Polarised Name Hard coat (Anti-scratch) Atacama  Frame Colour 0228 8701 Translucent brown Lens Colour Light brown/Polarised Lens Coating Hard coat (Anti-scratch) Part number 0250 2493 16 WWW.PROSAFE.COM.AU

FULL FRAME KAROO Modern frames, with tinted and polarised lens. Designed to reduce sun glare and unwanted glare from reflective surfaces, to improve visual clarity and comfort. Rubber pads on arms and nose bridge for comfort and grip. • Hard coat lens finish for high level scratch resistance Adjustable Name Griffon nose pad Frame Colour Black Lens Colour Clear Smoke/Polarised Lens Coating Hard coat (Anti-scratch) 0228 8684 Part number 0228 8684 Smoke/Polarised OASIS 0250 2510 A women’s style polarised safety glasses with Thermoplastic Rubber (TPR) temple arm and nose pads for all day comfort and grip. The tinted and polarised lens reduces sun glare and unwanted glare from reflective surfaces to improve visual clarity and comfort. • Hard coat lens finish for high level scratch resistance Name Oasis Frame Colour Gloss black Lens Colour Smoke/Polarised Lens Coating Hard coat (Anti-scratch) Part number 0250 2510 Smoke/Polarised PLASMA 0211 6338 Sleek frames with tinted and polarised lens. Designed to reduce sun glare and unwanted glare from reflective surfaces, to improve visual clarity and comfort. Rubber pads on arms and nose bridge for comfort and grip. • Hard coat lens finish for high level scratch resistance Smoke/Grey Smoke/Blue flash Grey/Polarised EYE PROTECTION 0862 4226 0862 4243 0862 4277 Name Plasma  Plasma Plasma Plasma Frame Colour Gloss black Gloss black Tortoise shell Gloss black Lens Colour Smoke/Polarised Smoke/Grey Grey/Polarised Smoke/Blue flash Lens Coating Hard coat (Anti-scratch) Hard coat (Anti-scratch) Hard coat (Anti-scratch) Part number 0211 6338 0862 4226 0862 4277 Mirror 0862 4243 PROSAFE Your Trusted Safety Brand 17

EYE PROTECTION SPECIALTY Clear SNIPE 0285 0483 For protection from nuisance dust and small particles these safety glasses feature a one piece moulded lens with a removable closed cell foam seal. For comfort there are indirect vents to reduce heat and perspiration vapour. • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches Name Snipe Smoke Light brown Frame Colour Clear 0285 0500 0285 0517 Lens Colour Clear Lens Coating Anti-fog/Anti-scratch Snipe Snipe Part number 0285 0483 Clear Light brown Smoke Anti-fog/Anti-scratch Brown 0285 0500 Anti-fog/Anti-scratch 0285 0517 Clear Smoke/Grey Elastic strap for RATTLER 0193 7039 0193 7056 a more secure fit For customisable protection from nuisance dust and small particles, Name Rattler Rattler features a one piece moulded lens with integrated foam seal. Frame Colour Matt black Select your preference from the interchangeable options, and wear Lens Colour as glasses or like googles. Lens Coating Clear Part number Anti-fog/Anti-scratch • Adjustable angle temple arms for all day comfort • Adjustable elastic headband strap for alternative secure fit 0193 7039 • Low profile design for a close fit to the face and excellent peripheral vision • Full frame moulded EVA seal reduces the likelihood of flying particles entering the ocular area from indirect angles • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches • Suitable for a wide range of industries, ideal for work environments where flying particle hazards may exist Rattler Matt black Smoke/Grey Anti-fog/Anti-scratch 0193 7056 18 WWW.PROSAFE.COM.AU

SPECIALTY YUKON Conventional design with integral vented side shields provides comfort in humid conditions. Can be worn over some prescription spectacles. A cost effective style, ideal as a visitor sceptical. • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches Clear Grey 0240 0747 0349 9984 Name Frame Colour Yukon Yukon Lens Colour Clear Grey Lens Coating Clear Grey Part number Anti-fog/Anti-scratch Anti-fog/Anti-scratch 0240 0747 0349 9984 ARMADILLO* LIFT UP WELDING GOGGLES A comfortable and practical design, these welding googles come with a shade 5 lens, that can be lift to allow viewing through a clear polycarbonate chipping lens. • Replacement CR39 cover lenses provide resistance to pitting from spatter • Ideal for gas welding and cutting processes when used within the recommendations of AS/NZS 1336 Name Lift Up Welding Goggles Description Goggle – Complete Shade 5 Std Pack 1 Part number 0076 1736 DISPOSABLE LIFT UP WELDING FACE SHIELD* HELMET* Clear Clear Shade 11 EYE PROTECTION 0132 7775 0119 5121 0452 1106 *Full product detail can be found in the Head and Face section. PROSAFE Your Trusted Safety Brand 19

EYE PROTECTION SAFETY GOGGLES JAEGER  Clear Disposable Covers Splash resistant goggles with excellent peripheral vision, and a 0278 1055 0281 4188 secure fit. Frame Colour • One piece moulded low profile lens with Thermoplastic Rubber Translucent (TPR) frame for excellent comfort and a close fit – • Indirect vents to reduce heat and perspiration vapour • Splash resistant design with drain channel to direct splashed fluid away from vents • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches • 10 Pack disposable mylar covers available (0281 4188) • Suitable for a wide range of industries including where protection from low hazard splash is required Lens Colour Lens Coating Part Number Clear Anti-fog/Anti-scratch 0278 1055 Clear disposable cover – 0281 4188 Clear PETREL  0244 0953 Splash resistant goggles with excellent peripheral vision, and a secure fit. • One piece moulded spherical lens with Polyvinyl Chloride (PVC) frame and Nitrile Butadiene Rubber (NBR) closed cell foam seal for excellent comfort, seal and fit • 2.1mm thick, 5.5 Base curve rigid spherical lens mimics the curvature of the eye and reduces visual distortion at the extremities of the lens in both horizontal and vertical plains, providing a distinct advantage over cylindrical lens goggles • Indirect vents to reduce heat and perspiration vapour • Splash resistant design with drain channel to direct splashed fluid away from vents • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches • Suitable for a wide range of industries including where protection from low hazard splash is required Frame Colour Lens Colour Lens Coating Part Number Translucent smoke Clear Anti-fog/Anti-scratch 0244 0953 20 WWW.PROSAFE.COM.AU

SAFETY GOGGLES Clear Smoke/Grey GULL 0988 4742 0988 4759 Splash resistant goggles with excellent peripheral vision, and a Frame Colour secure fit. Translucent green Translucent green • One piece moulded lens and frame with integrated facial seal for excellent comfort and seal Clear 0076 1804 • Indirect vents to reduce heat and perspiration vapour Frame Colour • Splash resistant design with drain channel to direct splashed fluid Clear away from vents Clear • Anti-fog/Anti-scratch coating for fog resistance and resistance 0076 1787 Frame Colour to minor scratches Clear • Suitable for a wide range of industries including where protection from low hazard splash is required Lens Colour Lens Coating Part Number Clear Anti-fog/Anti-scratch 0988 4742 Smoke/Grey Anti-fog/Anti-scratch 0988 4759 IMPACT GENERAL PURPOSE 1010 Soft and flexible general purpose goggles with direct vents for maximum ventilation and user comfort. • Protection against dust and medium energy flying particles • Flexible Polyvinyl Chloride (PVC) frame with broad face flange • Anti-fog/Anti-scratch coating for fog resistance and resistance to minor scratches • Suitable for manufacturing, construction and mining industries Lens Colour Lens Coating Part Number Clear Anti-fog/Anti-scratch 0076 1804 CHEMICAL SPLASH 1012 EYE PROTECTION Soft and flexible splash resistant goggles with indirect vents to reduce heat and perspiration vapour. • Anti-fog/anti-scratch coating for fog resistance and resistance to minor scratches • Suitable for chemical processing, manufacturing, construction and mining industries Lens Colour Lens Coating Part Number Clear Anti-fog/Anti-scratch 0076 1787 PROSAFE Your Trusted Safety Brand 21

EYE PROTECTION ACCESSORIES MITYWIPE ANTI-FOG TOWELETTES Pre-moistened towelette with anti-fog formula designed to hygienically clean spectacle lenses with anti-fog coatings. • Non-abrasive and non-woven material • Ideal for also cleaning earmuffs and respirators 100 300 Description Pack Size Part Number Mitywipe – Lens cleaning wipes 100 0342 2295 22 WWW.PROSAFE.COM.AU Mitywipe – Lens cleaning wipes 300 0379 2044 LENS CLEANING TOWELETTE  Pre-moistened alcohol based towelette designed to hygienically clean spectacle lenses. • Non-abrasive and non-woven material • 500 Sachets per dispenser box • Ideal for safety and prescription glasses and sunglasses Description Pack Size Part Number Lens cleaning wipes 500 0716 9264 Not suitable for use on anti-fog spectacles UNDERGROUND ANTI-STATIC WIPES Pre-moistened ultra-soft towelette designed to hygienically clean spectacle lenses and prolong the life of your safety eyewear. • Anti-fog and Anti-static formulation • Non-abrasive and non-woven material • No aluminium components • Ideal for underground mining and gas works Description Pack Size Part Number Underground lens cleaning towelette 100 0023 8123

ACCESSORIES LENS CLEANER Anti-fog and Anti-static lens cleaner, designed to clean prescription, safety and sunglass lenses. • Alcohol and ammonia free • 200ml pump spray bottle Description Pack Size Part Number Lens cleaning fluid 200ml 0398 9908 MICROFIBRE LENS CLEANING CLOTH Microfibre lens cleaning cloth Ultrafine microfibre cloth enables superior cleaning of dust, Mini stick clean pad fingerprints and residue from lenses and screens without scratching or smearing. • Machine washable with no fabric softener • Ideal for cleaning spectacles, sunglasses, GPS units, smart phones and safety glasses Description Pack Size Part Number Microfibre lens cleaning cloth 160 x 190mm 0158 1739 Mini stick clean pad 30 x 40mm 0158 1756 SPECTACLE BAGS, CASES & STRAPS Neoprene Spectacle Strap Black Satin Spectacle Bag Drawstring bag, provides protection from dirt and scratches Black Satin Spectacle Bag EYE PROTECTION • Fits most sizes spectacles from most brands Adjustable Spectacle Strap Adjustable strap, fits most sizes of spectacles Neoprene Spectacle Strap Provides a snug fit to hold eyewear stable in rugged work environment • Fits most sizes spectacles from most brands Spectacle cord Nylon cord, suitable for most brands Spectacle Cord Adjustable Spectacle Strap Description Part Number Black satin spectacle bag 0201 9489 Adjustable spectacle strap 0244 0936 Neoprene spectacle strap 0443 8180 Spectacle cord 0443 8214 PROSAFE Your Trusted Safety Brand 23



HEAD & FACE PROTECTION Protect your head and face with reliable hard hats and face shields from PROSAFE. The Armadillo face shield provides high impact eye protection under AS/NZS 1337.1.2010 while the PROSAFE hard hat meets the AS/NZS 1801:1997 standards for occupational protective hard hats. 25

HEAD & FACE PROTECTION FACE SHIELDS ARMADILLO For superior protection from liquid splashes or flying debris the Armadillo face shield offers high impact full face and chin protection. The practical lift up design can be used in conjunction with half mask respirators and neckband style earmuffs. • Made from a durable polycarbonate lens, filters out 99.9% of UV rays • Anti-fog/Anti-scratch coating for fog resistance and resistance to minor scratches • Visor design incorporates chin guard for added protection • Brow guard includes a ratchet mechanism harness with sweatband • Certified to AS/NZS 1337.1:2010 – High impact protection, hot solids and splash resistance Replacement visor options • Smoke lens provides protection from sun glare, reduces risk of eye strain and fatigue • Shade 5 lens suitable for oxygen cutting, lancing and deseaming, flame gouging, general and braze welding – Limited to maximum shade 5 applications only (AS/NZS 1338.1.2012) Clear Smoke Shade 5 0378 8610 0193 7073 0202 2345 Product Namer Lens Colour Lens Coating Materials Part number Complete Faceshield Clear Anti-fog /Anti-scratch Polycarbonate 0132 7775 Replacement Visor Clear Anti-fog /Anti-scratch Polycarbonate 0378 8610 Replacement Visor Smoke Anti-fog /Anti-scratch Polycarbonate 0193 7073 Replacement Visor Shade 5 Anti-fog /Anti-scratch Polycarbonate 0202 2345 Replacement Sweatband - - Polycarbonate 0546 6204 Browguard only - - - 0522 2390 26 WWW.PROSAFE.COM.AU

FACE SHIELDS DISPOSABLE FACE SHIELD - 50 PACK HEAD & FACE PROTECTION Full face single use clear face shield, lightweight and easy to use. Intended for use against non-hazardous, non dangerous liquids or dusts. • Can be worn with or without glasses or goggles • Resistant to fogging for maximum visibility • Soft foam band and elastic headband for a comfortable fit • Elastic headband with snap closure at both ends of shield • Single use application only Note: This product does not provide impact protection Lens Colour Dimension: Materials Part number Clear 320 x 220mm BOPET (biaxial-oriented polyethylene terephthalate) 0119 5121 PROSAFE Your Trusted Safety Brand 27

HEAD & FACE PROTECTION WELDING PROTECTION Your face and eyes need protection from heat, sparks, ultraviolet and infrared radiation when welding. For protection and convenience the Lift Up Welding Helmet is ideal. A lightweight, affordable helmet, providing protection to your face and eyes, with the functionality to quickly inspect your work without removing your helmet. 28 WWW.PROSAFE.COM.AU

WELDING PROTECTION Filter LIFT UP WELDING HELMET Gold Plated GLASS FILTERS Welding helmet with ratchet mechanism harness and sweat band. • Replacement gold filter lenses reflect head and allow work to be The lift up face shield allows viewing of work without face shield seenin more natural colour removal, while the lift up lens holder allows viewing of work through a clear polycarbonate chipping lens. • Protect against infrared and ultraviolet radiation and glare Complete helmet comes standard with a shade 11 lens, • Complies with AS/NZS 1338.1:2012 – Filters for protection against polycarbonate chipping lens and plastic cover lens radiation generated in welding and allied operations Chipping lens approved to AS/NZS 1337.1:2010 – Medium impact Dimensions mm Shade Std Pack Part Number protection 108 x 51 Shade 8 filter 1 0400 8008 Filter approved to AS/NZS 1338.1:2010 for protection against 108 x 51 Shade 9 filter 1 0400 8105 radiation generated in welding and allied operations 108 x 51 Shade 10 filter 1 0400 8202 108 x 51 Shade 11 filter 1 0400 8309 Lens Colour Lens Coating Lens Category Frame Colour Part Number 108 x 51 Shade 12 filter 1 0400 8406 108 x 51 Shade 10 – Gold plated 1 0440 6707 Weld Helmet - Complete NA Sh11 Black 0452 1106 108 x 51 Shade 11 – Gold plated 1 0440 6600 108 x 51 Shade 12 – Gold plated 1 0440 6503 CR39 Polycarbonate HEAD & FACE PROTECTION COVER & CHIPPING LENSES Magnification Cover Lens MAGNIFICATION LENS Replacement CR39 cover lenses provide resistance to pitting from spatter • Improves operator visibility of work area Chipping Lens • Fits all standard welding helmets 108 x 51mm Polycarbonate inner lens for protection when chipping • Suitable for welding, fabrication and maintenance applications Complies with AS/NZS 1337.1:2010 – Medium impact protection • Complies with AS/NZS 1338.1:2012 Dimensions mm Description Material Std Pack Part Number Dimensions mm Description Std Pack Part Number 108 x 51 Cover lens Glass 1 0401 1309 108 x 51 Magnification 1.5x 1 0317 2633 108 x 51 Cover lens CR39 1 0401 1105 108 x 51 Magnification 2.0x 1 0317 2650 108 x 51 Chipping lens Polycarbonate 1 0116 7363 108 x 51 Magnification 2.5x 1 0317 2667 PROSAFE Your Trusted Safety Brand 29

HEAD & FACE PROTECTION HARD HATS Orange 630 HARD HATS - TYPE 1 VENTED • Type 1 vented – Lightweight ABS material • Short peak provides improved field of vision • Vents on top, front and rear of the hard hat allow maximum cooling for wearer comfort • Six point suspension harness with adjustable pin lock for size adjustment • 30mm Slots for attachment of accessories • Suitable for general industrial, construction and mining applications where danger exists from falling objects Blue Mfr No. Description Colour Part Number 630 ORN Vented – Type 1 Orange 0228 4179 White 630 BLU Vented – Type 1 Blue 0228 4162 630 WHT Vented – Type 1 White 0228 4145 630 HARD HATS ACCESSORIES Elastic Chin Strap Suitable for PROSAFE 630 Hard Hats - Type 1 Vented Chin Strap • Chinstrap options for improved helmet fit security in confined spaces or high wind Ratchet Harness • Ratchet suspension harness for quick and secure adjustment Pinlock Harness • Replacement pin lock suspension harness Sweatband • Replaceable padded sweatband for comfort Ratchet Harness Pinlock Harness Mfr No. Description Part Number 630 HARN Pinlock Harness Replacement 0228 4213 30 WWW.PROSAFE.COM.AU 630 R-HARN Ratchet Harness Replacement 0228 4230 630 SWEAT Replacement Sweatband 0228 4247 HXCS40 Elastic Chin Strap 0397 7509

HARD HATS ALUMINIUM VISOR HOLDER • Aluminium visor holder compatible with PROSAFE 630, 3MTM TA560/570 and 3MTM HC600/HC660 series hard hats • Used to attach visors to hard hats • Hard hats, earmuffs and visors sold separately according to user application Mfr No. Description Part Number FHH407 Aluminium visor holder 0139 0063 SAFETY CAP DECALS • Applied to hard hats to identify people HEAD & FACE PROTECTION • Material: Self Adhesive Vinyl (SAV) Description Size Quantity Part Number Floor warden Ø56mm 5 0079 3313 Fire warden Ø56mm 5 0079 3330 Chief warden Ø56mm 5 0194 6015 Warden Ø56mm 5 0194 6032 Area warden Ø56mm 5 0194 6066 Deputy chief warden Ø56mm 5 0194 6049 Evacuation officer Ø56mm 5 0194 5998 First aid officer Ø56mm 5 0079 3347 Certified first aid Ø56mm 5 0194 6117 First aid trained Ø56mm 5 0194 6100 First aid cross Ø56mm 5 0194 6151 Safety committee Ø56mm 5 0194 6134 Emergency response team Ø56mm 5 0194 6168 Visitor Ø56mm 5 0194 6083 PROSAFE Your Trusted Safety Brand 31



HAND PROTECTION Safety gloves are designed to protect your hands from a variety of hazards including abrasions and cuts, oil, water or chemical penetration, or extreme temperature exposure. Many gloves provided added benefits like enhanced grip through the use of selected coatings. PROSAFE gloves are reliable and designed to protect. 33

HAND PROTECTION GUIDE TO STANDARDS FOR PROTECTIVE GLOVES AND SLEEVES EN 388 – Mechanical protection Standard applies to all kinds of protective gloves in respect of physical and mechanical aggressions caused by abrasion, blade cut, puncture and tearing. EN388:2003 Performance Level Rating 1 2 3 4 E 5 a Abrasion Resistance (Cycles) 100 500 2000 8000 - abcd b Blade Cut Resistance (Coupe Test/Index) 1.2 2.5 10.0 20.0 EN388:2016 c Tear Resistance (Newtons) 10 25 5.0 - d Puncture Resistance (Newtons) 20 60 50 75 - Performance Level Rating X AB 100 150 C D F abcdef e EN ISO Cut Resistance (Newtons) not rated 2 5 10 15 22 30 f EN Impact Protection PASS or FAIL EN 407 – HEAT PROTECTION 1 2 3 4 < 20 secs < 10 secs < 3 secs < 2 secs Performance levels no requirement < 120 secs < 25 secs < 5 secs 100°C > 15 secs 250 °C > 15 secs 350 °C > 15 secs 500 °C > 15 secs A. Burning behaviour (after flame and after glowtime) > 4 secs > 7 secs > 10 secs > 18 secs > 7 secs > 20 secs > 50 secs > 95 secs EN 407 B. Contact heat (contact temperature and threshold time) ABCDEF C. Convective heat (heat transfer delay) > 10 > 15 > 25 > 35 D. Radiant heat (heat transfer delay) 30g 60g 120g 200g E. Small drops molten heat (number of drops) F. Large quantity molten metal (mass) EN 4511 – COLD PROTECTION Performance levels 0 123 4 A. Convective cold Thermal insulation ITR in m2. °C/W | < 0.10 0.30 < | EN 511 R < 0. 025 0.10 < | < 0.15 0.15 < | < 0.22 0.22 < | < 0.30 0. 150 < R B. Contact cold Thermal insulation R in m2. °C/W Fail 0. 025 < R < 0. 050 0. 050 < R < 0. 100 0. 100 < R < 0. 150 – ABC Pass – – C. Water penetration test Note: 0 is the lowest rating while 4 is the highest. 34 WWW.PROSAFE.COM.AU

EN ISO 374 – Chemical protection and/or protection against micro-organisms This standard specifies the capability of gloves to protect the user against chemicals and/or micro-organisms. MICRO-ORGANISMS EN 374:2003 Performance levels 1 2 3 EN level ＿> 2 Old: AQL (Acceptable Quality Level) for liquid penetration. A high index number is poor 4.0 1.5 0.65 EN ISO 374-5:2006 and a low index number is good. Gloves need to pass water and air leak test, and this test method remains unchanged as per the new EN ISO 374 standard. Additional chemicals VIRUS New: In addition to testing for protection from bacteria and fungi, each glove can be M. Nitric acid 65% tested for its protection against viruses with a new viral penetration test. N. Acetic acid 99% O. Ammonium hydroxide 25% CHEMICAL PROTECTION P. Hydrogen peroxide 30% S. Hydrofluoric acid 40% EN 374:2003 Old: breakthrough time > 30 minutes for at least three chemicals from A. Methanol T. Formaldehyde 37% this list (XYZ represent the code letters for three of these chemicals for B. Acetone XYZ which the glove obtained > 30 minutes breakthrough time) C. Acetonitrile EN ISO 374-1:2016 New: D. Dichloromethane Type C At least Level 1 performance (more than 10 minutes) against E. Carbon disulphide Type C at least one chemical on the list – cuffs are also tested.* F. Toluene Type B At least Level 2 performance (more than 30 minutes) against G. Diethylamine EN ISO 374-1:2016 at least three chemicals on the list – cuffs are also tested.* H. Tetrahydrofurane Type B Type A At least Level 2 performance (more than 30 minutes) against I. Ethyl acetate at least six chemicals on the list – cuffs are also tested.* J. n-Heptane K. Sodium hydroxide 40% L. Sulphuric acid 96% EN ISO 374-1:2016 Performance level 0 1 2 3 45 6 60 120 240 > 480 Type A *Only if the glove is > = 40cm Minutes < 10 10 20 UVWXYZ     The beaker icon (low chemical resistance/waterproof) has been eliminated. GLOVE SELECTION – CONSIDERATIONS IN CHOOSING THE CORRECT GLOVE Flexibility – Glove should be unrestricting for the user letting them make a complete fist Fit and Dexterity – Should allow the user to perform each action without the need to take off the glove Comfort Liner comfort – Should be soft and smooth without irritating the user’s skin Moisture management – Based on task and environment conditions the glove should be able to be worn for long periods Grip – The correct grip should provide the user with more control Protection, Puncture – Industrial protection from large objects that pose a puncture threat (timber, metal fabrication) or fine sharp Performance and objects such as medical needles Functionality Cut – When assessing the cut-resistant properties of a glove, you must consider several keys areas, including: material of construction, basis weight, fabric construction and coatings Impact – Back of Hand impact protection is designed to scatter impact force energy away from the bone, helping to prevent and or reduce hand/finger injuries Durability Abrasion – Ensures the glove provides the same level of protection at the end of the shift as it did at the beginning HAND PROTECTION SIZE GUIDE Size Hand circumference 2XS (5) 137 mm Measure the circumference of the palm at its widest point XS (6) 152 mm (perhaps across the knuckles). S (7) 178 mm Wearing the right size glove is important as poor fitted gloves M (8) 203 mm can be a hazard. L (9) 229 mm Tight gloves can restrict dexterity, cause discomfort and hand XL (10) 254 mm fatigue. Loose gloves can affect grip and dexterity. 2XL (11) 279 mm XL (12) 295 mm PROSAFE Your Trusted Safety Brand 35

HAND PROTECTION GENERAL PURPOSE Our general purpose gloves are lightweight and comfortable, designed to protected your hands while working. Select from a range of coatings types to enhance your grip and deliver the protection needed. Suitable for a wide variety of applications including assembly, automotive, general maintenance, materials handling, metal fabrication and warehousing. 36 WWW. PROSAFE.COM.AU

GENERAL PURPOSE GLOVES ULTRATECH PRO The ALL ROUNDER. A ultra lightweight and versatile glove, with nitrile foam coating for excellent grip in dry conditions. • Seamless 15 gauge Lycra/nylon liner • Nitrile foam coating, a light and breathable coating that provides - excellent dry grip - good grip in slightly oily and wet conditions - excellent abrasion resistance • Palm coat design allows for maximum breathability and comfort EN388:2016 Mfr No. Size Part Number 4121X W9616PSNS S 0097 7015 W9616PSNM M 0097 6998 W9616PSNL L 0097 6981 W9616PSNXL XL 0097 7032 EN388:2016 EN388:2016 EN388:2016 4121X 4121 4121X HAND PROTECTION ULTRATECH PRO ULTRATECH PRO ULTRATECH PRO TOUCH HI VIS FULL COAT Designed for use with touch screen devices. Versatile glove with hi vis colour for excellent All the features of the ULTRATECH PRO with • Seamless 15 gauge nylon liner with hand visibility. the added protection of a full nitrile foam copper finger tips coat for excellent abrasion resistance over • Flat nitrile palm coat for wear resistance • Seamless 18 gauge Lycra/nylon liner the entire hand. and grip. • Nitrile foam palm coat • Snug fit is recommended for optimum touch screen recognition Mfr No. Size Part Number W9617-XS XS 0182 4618 Mfr No. Size Part Number W9617-S S 0182 4635 Mfr No. Size Part Number W9621PS S 0205 8045 W9617-M M 0182 4652 W9615PSNS S 0097 6947 W9621PM M 0205 8028 W9617-L L 0182 4669 W9615PSNM M 0097 6930 W9621PL L 0205 8011 W9617-XL XL 0182 4686 W9615PSNL L 0097 6913 W9621PXL XL 0205 8062 W9617-2XL 2XL 0182 4703 W9615PSNXL XL 0097 6964 PROSAFE Your Trusted Safety Brand 37

HAND PROTECTION EN388:2016 EN388:2016 4121X 4121X ULTRATECH FOAM ULTRATECH NITRILE A great entry level glove with excellent dry grip. A light versatile glove with a waterproof palm. • Seamless 15 gauge polyester liner • Seamless 15 gauge polyester liner • Nitrile foam coating, light and breathable with excellent dry grip • Black nitrile, a non-breathable, non-porous coating and abrasion resistance, also very good grip in slightly wet or oily - prevents oil and water penetration environments. - provide excellent dry grip • Palm coat design allows for maximum breathability and comfort - good grip in slightly wet or oily environments. - excellent abrasion resistance Mfr No. Size Part Number Mfr No. Size Part Number W9673BPS S 0673 9334 W9673NBPS S 0673 9419 W9763BPM M 0673 9351 W9673NBPM M 0673 9436 W9763BPL L 0673 9368 W9673NBPL L 0673 9453 W9763BPXL XL 0673 9385 W9673NBPXL XL 0673 9470 W9763BPS2XL 2XL 0673 9402 W9673NBP2XL 2XL 0673 9487 EN388:2016 EN388:2016 EN511:2006 4121X 4121X 120 ULTRATECH PU ULTRATECH FREEZE An excellent all round general purpose glove with excellent dry grip. Designed for keeping your hands warm and protected. • Seamless 13 gauge polyester liner • Seamless 15 gauge nylon outer shell with a 7 gauge acrylic terry • PU (Polyurethane) palm coating for inner liner for thermal insulation - excellent dry grip • 3/4 Polyvinyl Chloride (PVC) foam coating for excellent dry grip - excellent grip and resistance to oils, fats, greases, solvents, and • Coating remains soft and flexible to -50˚C gasoline. - extra sensitivity and sense of touch - excellent abrasion resistance Mfr No. Size Part Number Mfr No. Size Part Number W9696PS S 0673 9249 WN9690S S 0862 4158 W9696PM M 0673 9266 WN9690M M 0862 4175 W9696PL L 0673 9283 WN9690L L 0862 4192 W9696PXL XL 0673 9300 WN9690XL XL 0862 4209 38 WWW.PROSAFE.COM.AU

GENERAL PURPOSE GLOVES EN388:2016 EN388:2016 3131X 2121X ULTRATECH LATEX ULTRATECH GRIPPER For exceptional grip in dry and wet conditions Traditional style glove with thick latex layer for excellent dry and wet • Seamless 15 gauge nylon liner grip. Double dipped latex 3/4 coat for durability and excellent grip • Textured latex palm coat provides excellent grip even with wet or slippery items even with wet or slippery items • Sewn cotton jersey liner Mfr No. Size Part Number • Double dipped latex 3/4 coat for durability and excellent grip W9680RFLS S 0674 0184 W9680RFLM M 0673 3826 even with wet or slippery items W9680RFLSL L 0673 3843 • 3/4 coating provides greater hand protection from abrasion and W9680RFLXL XL 0674 0235 W9680RFLS2XL 2XL 0674 0286 liquid penetration • Cotton blend wrist for a comfortable snug fit and to prevent dirt from entering Mfr No. Size Part Number W6825L L 0524 4166 EN388:2016 EN388:2016 4121X 2141X HAND PROTECTION ULTRATECH GRIP FLEX TUFF Designed for excellent grip in dry or oily environments A great entry level cotton handling glove, with excellent • Seamless 13 gauge polyester liner dry and wet grip. • Nitrile foam coating with flat black nitrile dots for excellent dry and oil grip, and excellent abrasion resistance • Seamless 10 gauge cotton liner for breathability • 3/4 coating provides greater hand protection and keeps the • Textured latex palm coat for excellent grip even with wet or gloves looking good in dirty environments slippery items • Alternative to traditional riggers gloves Mfr No. Size Part Number Mfr No. Size Part Number W9673GSNS S 0784 5269 W9688S S 0548 8882 W9673GSNM M 0784 5286 W9688M M 0548 8984 W9673GSNL L 0784 5303 W9688L L 0548 9052 W9673GSNXL XL 0784 5320 W9688XL XL 0548 9086 PROSAFE Your Trusted Safety Brand 39

HAND PROTECTION Cut resistant gloves are designed to protect your hands from cut injuries. Made using cut resistant fibres HPPE (High Performance Polyethylene) or Kevlar, they are both protective and durable, they also provide tear and abrasion resistance. All cut resistant gloves comply with EN 388:2016 and have a Cut Performance rating. They are suitable for any application requiring cut protection, such as metal fabrication, automotive assembly, glass handling, waste and mining industries. CUT RESISTANT GLOVES 40 WWW. PROSAFE.COM.AU

CUT RESISTANT GLOVES EN388:2016 SHOGUN CUT D A versatile glove that provides a high level of cut protection using HPPE fibres. Designed to protect from cut hazards whilst providing comfort, dexterity and flexibility. • Seamless 13 gauge HPPE (High Performance Polyethylene) glove for high level cut protection • PU (Polyurethane) palm coating for - excellent dry grip - excellent grip and resistance to oils, fats, greases, solvents, and gasoline - extra sensitivity and sense of touch - excellent abrasion resistance • Reusable and washable • High visibility option provides excellent hand visibility EN388:2016 4X42D SHOGUN CUT D 4X43D SHOGUN CUT D HI VIS Mfr No. Size Part Number WCT1056PU07 S 0248 7295 Mfr No. Size Part Number WCT1056PU08 M 0248 7312 WHV1057PU07 S 0248 7431 WCT1056PU09 L 0248 7329 WHV1057PU08 M 0248 7448 WCT1056PU10 XL 0248 7346 WHV1057PU09 L 0248 7465 WCT1056PU11 2XL 0419 2973 WHV1057PU10 XL 0248 7482 EN388:2016 EN388:2016 4X43B 4X43D SHOGUN CUT B SHOGUN CUT D – NITRILE FOAM A lighter glove, providing CUT B protection with the benefits of PU A versatile glove with a durable yet soft nitrile foam palm. HAND PROTECTION coating listed above. Designed to protect from cut hazards whilst • Seamless 13 gauge HPPE glove for high level cut protection increasing the level of comfort, dexterity and flexibility. • Nitrile foam palm coating for - excellent dry grip • Seamless 13 gauge HPPE glove for medium level cut protection - good grip in slightly oily and wet conditions • PU (Polyurethane) palm coated - excellent abrasion resistance • Reusable and washable • Reusable and washable Mfr No. Size Part Number Mfr No. Size Part Number WCT1055PU07 S 0268 8150 WCT1056NF07 S 0248 7363 WCT1055PU08 M 0268 8167 WCT1056NF08 M 0248 7380 WCT1055PU09 L 0268 8184 WCT1056NF09 L 0248 7397 WCT1055PU10 XL 0268 8201 WCT1056NF10 XL 0248 7414 WCT1055PU11 2XL 0419 2956 WCT1056NF11 2XL 0419 2990 PROSAFE Your Trusted Safety Brand 41

HAND PROTECTION ULTRATECH CUT D Designed for greater overall hand protection from cuts and abrasions. • Seamless 13 gauge HPPE (High Performance Polyethylene) shell for high level cut protection • Sandy finish nitrile foam for - excellent grip in dry and oily environments - excellent abrasion and wear resistance • 3/4 coating provides increase overall hand protection including greater resistance to liquid or oil penetration EN388:2016 Mfr No. Size Part Number 4X43D W9612PSN07 S 0350 2484 W9612PSN08 M 0350 2501 W9612PSN09 L 0350 2518 W9612PSN10 XL 0350 2535 W9612PSN11 2XL 0350 2552 EN388:2016 EN388:2016 4X42B 4X31B ULTRATECH CUT B ULTRATECH KEVLAR® For excellent dry handling and cut protection. Durable glove made with Kevlar and nitrile flat palm coating. • Seamless 13 gauge HPPE (High Performance Polyethylene) liner • Seamless 13 gauge Kevlar® liner for high level abrasion and good for medium cut protection cut resistance • PU (Polyurethane) palm coating for • Nitrile flat palm coating for - excellent dry grip - secure, tacky grip for dry surfaces - excellent grip and resistance to oils, fats, greases, solvents, and - resistant to liquid penetration gasoline. - excellent wear resistance - extra sensitivity and sense of touch • Good dexterity due to spandex yarn content - excellent abrasion resistance Mfr No. Size Part Number Mfr No. Size Part Number W9612PSN07 S 0350 2399 W9693S S 0419 5284 W9612PSN08 M 0350 2416 W9693M M 0617 2877 W9612PSN09 L 0350 2433 W9693L L 0617 2894 W9612PSN10 XL 0350 2450 W9693XL XL 0617 2928 W9612PSN11 2XL 0350 2467 42 WWW.PROSAFE.COM.AU

CUT RESISTANT GLOVES FLEX TUFF KEVLAR® A thicker style glove providing medium cut protection, and excellent dry and wet grip. • Seamless 10 gauge 100% Kevlar® liner for high level abrasion, good cut resistance and breathability • Blue textured latex palm coat for - excellent grip even with wet or slippery items Mfr No. Size Part Number EN388:2016 W9693S S 0419 5284 2X43B W9693M M 0617 2877 W9693L L 0617 2894 W9693XL XL 0617 2928 EN388:2016 EN388:2016 4X43C 4X4XD GRIP SHARP LEATHER SHOGUN CUT D SLEEVE A thicker style Kevlar® glove with a leather palm, for durability and Cut protection for wrist and forearm HAND PROTECTION heat resistance. • 10 gauge HPPE (High Performance Polyethylene) for high level cut protection • Seamless 7 gauge Kevlar® liner for high level abrasion and cut • 35cm sleeve with thumb slot resistance • Stretchable and breathable for a snug fit, dexterity and all day wearer comfort • Tough split leather palm provides excellent protection against • Reusable and washable abrasion, cut, tear and puncture hazards • Suitable for automotive, glass industry, sheet metal handling, metal stamping and workshops Ideal for working with metal and plastic extrusion Mfr No. Size Part Number Mfr No. Length mm Part Number W9686L L 0593 9807 WUT1056N0 350 0268 8133 PROSAFE Your Trusted Safety Brand 43

HAND PROTECTION LEATHER GLOVES Leather work gloves provide robust protection, they are a favourite amongst construction industries. Known for their durability, abrasion resistance, and heat resistance they are suitable for a wide variety of industries ranging from automotive, forestry, warehousing, plumbing, search and rescue, transportation, construction and earthworks industries. Ideal also for general maintenance and heavy equipment operation. 44 WWW.PROSAFE.COM.AU

LEATHER GLOVES WARRIOR 750 Premium Leather Riggers glove, an excellent general purpose glove where extra protection is need. • Premium cow grain leather for a more comfortable feel and greater movement (100% leather) • Keystone thumb design for comfort and dexterity • Double stitched in high wear areas for durability • Gathered elastic strip at the back of the wrist to restrict dirt entering • Colour coded cuff for easy size identification Mfr No. Size Part Number 3121 W935CH S 0632 6370 W936CH M 0632 6387 W937CH L 0632 6404 W938CH XL 0632 6421 W939CH 2XL 0632 6438 EN388:2016 EN388:2016 2133X Standard Cuff 2133X Extended Cuff WARRIOR – 500 • Gathered elastic strip at the back of the wrist to restrict dirt HAND PROTECTION entering • Cow grain leather (100% leather) • Winged thumb design • Extended cuff option provides increased wrist protection Description Size Part Number Description Size Part Number Standard S 0379 2945 Extended Cuff S 0433 2729 Standard M 0504 2887 Extended Cuff M 0433 2712 Standard L 0172 1353 Extended Cuff L 0433 2695 Standard XL 0509 2255 Extended Cuff XL 0433 2763 Standard 2XL 0277 0736 Extended Cuff 2XL 0433 2746 PROSAFE Your Trusted Safety Brand 45

HAND PROTECTION WARRIOR – 250 • 100% Leather • Cow grain palm with split leather back of hand • Winged thumb design • Gathered elastic strip at the back of the wrist to restrict dirt entering • Suitable for general handling, building, construction and earthworks industries Mfr No. Size Part Number ISP 14B BZ: S S 0287 9332 ISP 14B BZ: M M 0287 9349 ISP 14B BZ: L L 0433 2950 ISP 14B BZ: XL XL 0287 9383 ISP 14B BZ: 2XL 2XL 0287 9400 JACKAROO ALL LEATHER • Chrome split leather for durability • Durable • Cotton drill back with leather knuckle strip for added protection • Lined palm • Winged thumb design • Cow grain split leather front and back • Gathered elastic strip at the back of the wrist to restrict dirt entering • Suitable for mining, steel fabrication, automotive, construction, • Canvas cuff for wrist protection Suitable for mining, steel fabrication, engineering, shipping, smelters and foundries automotive, construction, engineering, shipping, smelters and foundries smelters and foundries Mfr No. Size Part Number Mfr No. Size Part Number GLCH0015 L 0347 4552 GLRD0025 L 0433 2967 46 WWW.PROSAFE.COM.AU

LEATHER GLOVES Single Palm Patch Palm 3121 Knit Wrist CANDY STRIPE HAND PROTECTION • Durable • Leather knuckle bar • Canvas candy stripe back and cuff • Suitable for mining, steel fabrication, automotive, construction, engineering, shipping, smelters and foundries Description Size Part Number Knit Wrist L 0433 3171 Patch Palm L 0503 6954 Single Palm L 0433 3188 PROSAFE Your Trusted Safety Brand 47

HAND PROTECTION MECHANICS GLOVES CHEETAH A popular mechanics style glove made from a durable synthetic leather, they are protective and comfortable, and suit a wide range of applications. • Tough reinforced synthetic leather palm and finger tips for extended life • Vented finger fourchettes for breathability and comfort • Breathable black nylon and foam back provides protection and comfort • Neoprene knuckle protector, for comfort and flexibility • Adjustable wrist strap for a secure fit • Suitable for automotive, roadworks, emergency response, utilities, construction, carpentry, mining and shipping industries and operating heavy machinery EN388:2016 Mfr No. Size Part Number 2121X W935CH S 0632 6370 W936CH M 0632 6387 W937CH L 0632 6404 W938CH XL 0632 6421 W939CH 2XL 0632 6438 EN388:2016 EN388:2016 2121X 2121X CHEETAH HI VIS CHEETAH FINGERLESS High visibility design provides excellent hand visibility Fingerless design provides maximum dexterity Mfr No. Size Part Number Mfr No. Size Part Number W934CHHV XS 0979 9555 W936CHFL M 0653 6847 W935CHHV S 0771 2669 W937CHFL L 0653 6864 W936CHHV M 0771 2686 W938CHFL XL 0653 6881 W937CHHV L 0771 2703 W939CHFL 2XL 0653 6898 W938CHHV XL 0771 2720 W939CHHV 2XL 0771 2737 48 WWW.PROSAFE.COM.AU

MECHANICS GLOVES EN388:2016 EN388:2016 2111X 2111X SYNTHETIC BRONCO LEATHER MECHANICS A flexible yet durable glove, made with a reinforced synthetic palm Premium leather mechanics gloves, designed for protection and and finger tips and a spandex back for comfort and flexibility. comfort. • Neoprene knuckle protector, for comfort and flexibility • Soft and durable goat skin leather palm and fingers • Elastic cuff for a snug fit • Vented air mesh spandex back for flexibility and all day comfort • Excellent alternative to traditional leather riggers gloves • Vented finger sidewalls allow airflow for comfort • Adjustable wrist strap for a secure fit Mfr No. Size Part Number Mfr No. Size Part Number W904HVS S 0811 2271 W901S S 0633 0297 W904HVM M 0811 2288 W901M M 0617 2809 W904HVL L 0811 2305 W901L L 0617 2826 W904HVXL XL 0811 2322 W901XL XL 0617 2843 W904HV2XL 2XL 0811 2339 EN388:2016 EN388:2016 2111X 2111X HAND PROTECTION BRONCO HI VIS WINTER LEATHER MECHANICS High visibility design provides excellent hand visibility 3MTM ThinsulateTM liner for warmth, ideal for working in cold climates Mfr No. Size Part Number Mfr No. Size Part Number W904HVS S 0192 3830 W901T M M 0676 1332 W904HVM M 0192 3847 W901T XL XL 0617 2860 W904HVL L 0192 3864 W904HVXL XL 0192 3881 W904HV2XL 2XL 0192 3898 PROSAFE Your Trusted Safety Brand 49

HAND PROTECTION PREDATOR 3/4 COAT A durable Nitrile coated glove, lined with cotton jersey, makes a great alternative to leather gloves in wet or liquid handling environments. • Actifresh 100% cotton jersey liner for hygiene and comfort • Nitrile medium weight 3/4 coating for - secure, tacky grip for dry surfaces - resistant to liquid penetration - excellent abrasion resistance • Cotton blend wrist for comfort and to prevent dirt from entering • Suitable for building and construction, forestry and metal fabrication industries EN388:2016 Mfr No. Size Part Number 4111X W9780S S 0522 5977 W9780M M 0085 9384 W9780L L 0117 9586 W9780XL XL 0054 6363 EN388:2016 EN388:2016 EN388:2016 4111X 4111X 4111X PREDATOR FULL COAT PREDATOR PLUS PREDALITE Medium weight full coat nitrile for protection Heavyweight 3/4 nitrile coating for extra Lightweight 3/4 nitrile coat for protection and durability hard wearing protection and durability without the loss of sense of touch • Canvas safety cuff for wrist protection Mfr No. Size Part Number Mfr No. Size Part Number Mfr No. Size Part Number W9781S S 0673 9504 W9760M M 0108 4522 W9790S S 0387 0737 W9781M M 0673 9521 W9760L L 0108 4590 W9790M M 0387 0856 W9781L L 0673 9538 W9760XL XL 0616 2473 W9790L L 0387 1026 W9781XL XL 0673 9555 W9790XL XL 0387 1264 50 WWW.PROSAFE.COM.AU