catalog-hardwareontime

2011 Catalog HARDWAREON TIME PRODUCT CATALOGTIME IS PRICELESS.www.hardwareontime.com

www.hardwareontime.com WE ARE AN INTERNATIONAL BRANDWORLDWIDEEurope North America Asia-Pacific Middle EastFinland Canada Australia EgyptFrance USA China IranGermany Indonesia United Arab EmiratesItaly South America IndiaPoland Malaysia AfricaSpain Mexico PhilippineSweden Brazil Singapore South AfricaTurkey Colombia South KoreaNorway ChileUK Argentina Thailand Peru VietnamRoom 303, NO.26, Lane 770, Sanquan Road, CALLE 52 ELVIRA MENDEZ, AREA BANCAREAZhabei District, Shanghai, China. EDIFICIO VILLARINO PISO 11, PANAMAPhone: +(86) 13671602231David Tian, Director of Logistics email: [email protected]: [email protected] [email protected]

www.hardwareontime.com01 LOCKS02 HINGES03 HANDLES04 COVER STAY05 GASKETING06 ACCESSORIES 2013

HOT – Global Industrial hardware supplier, We provided qualified Locking and hingingaccess control system and components for: Electrical Cabinets and Enclosures IT & Network enclosure Industrial Machine Equipment Automotive Industry ATM & Vending Machine Food industry Equipment Our manufacture ability is from product design, tooling develop, Zinc die , Al. die casting and plastic injection, CNC turning and Milling Process, Stamping and bending Process, Surface treatment: Powder coated, chrome plating and nally Sub-Assemble.

Explanation Pictograms Right & left side opening Left side opening Right side opening Padlockable Attention Pur foam sealing50 IP-rating:IP50 64 IP-rating:IP64 65 IP-rating:IP65 External hinge Concealed hinge Lift-off hinge Stainless steelProtection categories to IEC 60 529lP54 The IP protection category is characterised by 2numbers.Example of protection category:e.g.IP 54.Rrst NO Degrees of protection for protection for protection against Sec. NO Degrees of protection for protection against water contact and foreign bodies 1 1 2 Protected against vertically falling water drops 2 Protected against solid foreign objects Φ 50 mm and greater 3 Protected against vertically falling water drops when the 3 Protected against solid foreign objects Φ 12.5 mm and greater 4 enclosure is tilted up to 15 4 5 Protected against splashing water 5 Protected against solid foreign objects Φ 2.5 mm and greater 6 Protected against splashing water 6 Prorected against solid foreign obiects Φ1.0mm and greater 7 Protected against water jets Dust-protected Dust-tight Protected against powerful ater jets Protected against the effects of temporary immersion in waterExplanation of the terms left hand/right hand door and locking direction Right LeftA section of our standard surface treatment，The specific color code is at end of our product order code.Code Surface treatment Code Surface treatment -10 Smoothly black powder coated -60 Bule green powder coated -20 Black textured powder coated -01 Zinc plating -30 Bright Chrome -32 Powder coated RAL7032 -40 Satin Chrome -35 Powder coated RAL7035 -50 Black E-coated

A selection of our most HOT products,For more procusts, Pls review inside pages.Lock PAGE 01 PAGE 02 PAGE 05 PAGE 07 PAGE 13 PAGE 15 PAGE 29 PAGE 30 PAGE 30 PAGE 33 PAGE 35 PAGE 36 PAGE 44 PAGE 44 PAGE 45 PAGE 47 PAGE 47 PAGE 48 PAGE 50 PAGE 51 PAGE 52 PAGE 52 PAGE 53 PAGE 55 PAGE 72Hinges PAGE 67 PAGE 68 PAGE 69 PAGE 69 PAGE 71 PAGE 75 PAGE 76 PAGE 77 PAGE 78 PAGE 80 PAGE 81 PAGE 95 PAGE 97 PAGE 98 PAGE 99 PAGE 99 PAGE 99 PAGE 105 PAGE 106 PAGE 107 PAGE 107 PAGE 108Handles PAGE 115 PAGE 115 PAGE 116 PAGE 117 PAGE 118 PAGE 105Cover stay PAGE 114Gasketing PAGE 120 PAGE 120 PAGE 120 PAGE 121 PAGE 121 PAGE 121

PAGE 18 PAGE 19 PAGE 20 PAGE 22 PAGE 23 PAGE 24 PAGE 27 PAGE 37 PAGE 38 PAGE 39 PAGE 40 PAGE 41 PAGE 42 PAGE 43 PAGE 45 PAGE 64 PAGE 65 PAGE 60 PAGE 61 PAGE 62 PAGE 63 PAGE 55 PAGE 56 PAGE 57 PAGE 57 PAGE 58 PAGE 58 PAGE 59 PAGE 72 PAGE 73 PAGE 73 PAGE 73 PAGE 74 PAGE 74 PAGE 75 PAGE 83 PAGE 83 PAGE 85 PAGE 86 PAGE 88 PAGE 90 PAGE 91 PAGE 100 PAGE 100 PAGE 100 PAGE 101 PAGE 102 PAGE 102 PAGE 103 PAGE 109 PAGE 110 PAGE 111 PAGE 111 PAGE 112 PAGE 113 PAGE 113 PAGE 119 PAGE 119Accessories PAGE 123 PAGE 123 PAGE 129 PAGE 130 PAGE 131 PAGE 131 PAGE 133

1100 01 SWINGHANDLE Zinc die body black powder coated, zinc die rod control, m.s. zinc plated shaft and at rods, SUS304 padlockable device.01 LOCK 35 21 GH18 8 +0.5 +0.550 50-0 160 50-0 +1.5 +0.5 Ts=2.0 -0.5 25-0 Panel CutoutAcces s ories r ef. to p age #1. CAM ref. to page 9A-001R emark1. Key different on request.2. CH751 key code on request3. Padlockable on request Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Cylinder style With Without With Without with WithoutAlike HT333 Profile Round Cylinder Dust Cap Dust Cap Dust CapDouble Bit 4mmSquare 7mm 1100-1P01-C 1100-1P01-NC 1100-2P01-C 1100-2P01-NC 1100-3P01-C 1100-3P01-NCTriangular 8mm 1100-1P02-C 1100-1P02-NC 1100-2P02-C 1100-2P02-NC 1100-3P02-C 1100-3P02-NC 1100-1P03-C 1100-1P03-NC 1100-2P03-C 1100-2P03-NC 1100-3P03-C 1100-3P03-NC 1100-1P04-C 1100-1P04-NC 1100-2P04-C 1100-2P04-NC 1100-3P04-C 1100-3P04-NCFor more information about this product line you can visit our website :www.hardwareontime.com 2013

02 1100 ROD CONTROL SWINGHANDLE 01 LOCK 14 35 21 90°=16mm LA2=123.5 135°=23.5mm 6 +0.5 50-0 160 LA1=223.5 +0.5 347 50-0 50 +1 21 +0.5 Ts=2.0 -0.5 25-0 Panel Cutout 4.5 135°=23.5mm 90°=16mm 6 14 PUR foam gasket 22.5 35 13.5 10 160 142013 Ts=2 4 21 For more information about this product line you can visit our website :www.hardwareontime.com

1101 0301 LOCK SW ING HANDLE PA lock body, M.S zinc plated shaft and xing parts +1.5 Ts=1.5 -0.5 33.5 GH=18 91 29 44 38 +0.5 158.5 50 50-0 +0.5 50-0 50 21.5 21.5 Alike HT333 Round Cylinder +0.5 25-0 Panel Cutout SUS 304 clip O-ring IP protected 10 14 29 Padlock deviceAcces s ories r ef. to p age #1. CAM ref. to page 9A-001R emark1. Key different on request.2. CH751 key code on request3. Padlockable on requestCylinder style Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Alike HT333 Round Cylinder With Without With without With Without Dust Cap Dust Cap Dust Cap 1101-1001-C 1101-1001-NC 1101-2001-C 1101-2001-NC 1101-3001-C 1101-3001-NCFor more information about this product line you can visit our website :www.hardwareontime.com 2013

04 135° =24mm 110190 ° =16mm 7.8 ROD CONTROL SWINGHANDLE 6 PA lock body, zinc die rod control, M.S. zinc plated shaft and at rods.4.5 01 LOCK LA2=124 3 14 629 14 +0.5 50-0 +1.5 Ts=1.5 -0.5 33.5 12.5 22 50 91 +0.5 158.5 50-0 50 LA1=224 21.5 21.5Alike HT333 Round Cylinder +0.5 25-0 Panel Cutout 3 135° =24mm 90 ° =16mm 1.2 4.3 Round Studs 7.8 7 4.5 O-ring IP protected SUS 304 clip 7.76 63.5 7.8 7.8Square Studs 14 Acces s ories r ef. to p age # 10 1. CAM ref. to page 9A-001 29 R emark 1. Key different on request. Padlock device 5.2 Hole 5.2 2. CH751 key code on request 3. Padlockable on request2013 For more information about this product line you can visit our website :www.hardwareontime.com

1101 0501 LOCK SW ING HANDLE PA lock body, M.S zinc plated shaft and xing parts +1.5 Ts=1.5-0.5 33.5 GH=18 91 29 44 38 +0.5 158.5 50 50-0 +0.5 50-0 50 21.5 21.5 Alike HT333 Profile +0.5 Round Cylinder 25-0 10 SUS 304 clip Panel Cutout 29 14 Padlock O-ring IP device protectedAcces s ories r ef. to p age # □71. CAM ref. to page 9A-001 △8 4R emark1. Key different on request. 32. CH751 key code on request3. Padlockable on request 16 Double Bit 4mm Triangular 8mm Square 7mm Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Cylinder style With Without With Without With WithoutAlike HT333 Round Cylinder Dust Cap Dust Cap Dust CapDouble Bit 4mmSquare 7mm 1101-1P01-C 1101-1P01-NC 1101-2P01-C 1101-2P01-NC 1101-3P01-C 1101-3P01-NCTriangular 8mm 1101-1P02-C 1101-1P02-NC 1101-2P02-C 1101-2P02-NC 1101-3P02-C 1101-3P02-NC 1101-1P03-C 1101-1P03-NC 1101-2P03-C 1101-2P03-NC 1101-3P03-C 1101-3P03-NC 1101-1P04-C 1101-1P04-NC 1101-2P04-C 1101-2P04-NC 1101-3P04-C 1101-3P04-NCFor more information about this product line you can visit our website :www.hardwareontime.com 2013

06 01 LOCK 1101 135° =24mm ROD CONTROL SWINGHANDLE90 ° =16mm PA lock body, zinc die rod control, M.S. zinc plated shaft and at rods.7.8 6 3 14 64.5 14LA2=124 +1.5 Ts=1.5 -0.529 33.5 +0.5 12.5 50-0 22 50 91 +0.5 158.5 50-0 50 LA1=224 21.5 21.5Alike HT333 Profile 7.7+0.5Round Cylinder 625-0 7.8Panel Cutout 3 4.3 135° =24mm 6 90 ° =16mm 3.5 1.2 Square Studs Round Studs 7 7.8 10 O-ring IP protected 4.5 SUS 304 clip 7.8 3 5.2 Hole 5.2 16 △ 8 □7 Acces s ories r ef. to p age # 4 1. CAM ref. to page 9A-001 14 R emark 1. Key different on request. 29 2. CH751 key code on request Padlock 3. Padlockable on request device Double Bit 4mm Triangular 8mm Square 7mm2013 For more information about this product line you can visit our website :www.hardwareontime.com

1102 07 SW ING HANDLE PA lock body, Brass handle shaft,M.S zinc plated xing parts01 LOCK 34 GH=18 38 +0.5 50-0 164 91 +0.5 50-0 50 25 24 Alike HT333 Round Cylinder +0.5 25-0 Panel CutoutAcces s ories r ef. to p age #1. CAM ref. to page 9A-001R emark1. Key different on request.2. CH751 key code on requestCylinder style Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Alike HT333 Round Cylinder Dust Cap Dust Cap Dust Cap 1102-1001-C 1102-2001-C 1102-3001-CFor more information about this product line you can visit our website :www.hardwareontime.com 2013

08 6 90°=16mm 1102LA2=123.5135°=23.5mm ROD CONTROL SWINGHANDLE PA lock body, zinc die casting rod control, M.S. zinc plated shaft and at rods. 01 LOCK 14 34 +0.5 50-0347 347 +0.5 164 50-0 50 LA1=223.5 135°=23.5mm 21 +0.5 90°=16mm +1.5 25-0 Panel Cutout Ts=2.0 -0.5 3 7.76 3.52013 6 7.8 7.8 Square Studs 5.2 Hole 5.2 For more information about this product line you can visit our website :www.hardwareontime.com

1102 09 SWINGHANDLE PA lock body, Brass handle shaft,M.S zinc plated xing parts01 LOCK 34 GH=18 38 +0.5 50-0 164 91 +0.5 50-0 50 25 24 Alike HT333 Profile +0.5 Round Cylinder 25-0 Panel Cutout □7 △8 4 16 3Acces s ories r ef. to p age # Double Bit 4mm Triangular 8mm Square 7mm1. CAM ref. to page 9A-001R emark1. Key different on request.2. CH751 key code on requestCylinder style Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Alike HT333 Profile Round Cylinder Dust Cap Dust Cap Dust CapDouble Bit 4mm 1102-1P01-C 1102-2P01-C 1102-3P01-CSquare 7mm 1102-1P02-C 1102-2P02-C 1102-3P02-CTriangular 8mm 1102-1P03-C 1102-2P03-C 1102-3P03-C 1102-1P04-C 1102-2P04-C 1102-3P04-CFor more information about this product line you can visit our website :www.hardwareontime.com 2013

10 90°=16mm 1102135°=23.5mm ROD CONTROL SWINGHANDLE PA lock body, zinc die casting rod control, M.S. zinc plated shaft and at rods. 01 LOCK 14 4.5 34347 164 +0.5 50-0 6 135°=23.5mm +0.5 90°=16mm 50-0 50 21 +0.5 +1.5 25-0 Panel Cutout Ts=2.0 -0.5 3 7.7 6 7.8 □7 4 △8 6 3.5 16 3 Square Studs 7.8 5.2 Hole 5.2 Double Bit 4mm Triangular 8mm Square 7mm2013 For more information about this product line you can visit our website :www.hardwareontime.com

1102 11 SW ING HANDLE Black PA body, zinc die handle black powder coated.01 LOCK 34 GH18 164 +0.5 91 50-0 8 +0.5 50-0 50 +1.5 21 +0.5 Ts=2 -0.5 25-0 Panel CutoutAcces s ories r ef. to p age #1. CAM ref. to page 9A-001R emark1. Key different on request.2. CH751 key code on requestFull PA Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Zinc die handle,PA lock housing 1102-1001-NC 1102-2001-NC 1102-3001-NC 1101-1002-NC 1102-2002-NC 1102-3002-NCFor more information about this product line you can visit our website :www.hardwareontime.com 2013

12 6 90°=16mm 1102LA2=123.5135°=23.5mm ROD CONTROL SWINGHANDLE Black PA body, zinc die black handle powder coated, zinc die shaft and rod control, m.s. zinc plated at rods 01 LOCK 14 4.5 34 +0.5 50-0347 +0.5 164 50-0 50 91 LA1=223.5 21 +0.5 +1.5 25-0 Ts=2-0.5 Panel Cutout 135°=23.5mm 90°=16mm2013 For more information about this product line you can visit our website :www.hardwareontime.com

1102 13 SW ING HANDLE Black PA body, zinc die handle black powder coated01 LOCK 34 GH18 164 +0.5 91 50-0 8 +0.5 50-0 50 +1.5 21 +0.5 Ts=2 -0.5 25-0 Panel CutoutAcces s ories r ef. to p age #1. CAM ref. to page 9A-001R emark1. Key different on request.2. CH751 key code on requestCylinder style Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control) 1102-3P01-NCAlike HT333 Profile Round Cylinder 1102-1P01-NC 1102-2P01-NC 1102-3P02-NCDouble Bit 4mm 1102-1P02-NC 1102-2P02-NC 1102-3P03-NCSquare 7mm 1102-1P03-NC 1102-2P03-NC 1102-3P04-NCTriangular 8mm 1102-1P04-NC 1102-2P04-NC 2013For more information about this product line you can visit our website :www.hardwareontime.com

14 1102 6 90°=16mm LA2=123.5 135°=23.5mm ROD CONTROL SWINGHANDLE Black PA body, zinc die black handle powder coated, zinc die shaft and rod control, m.s. zinc plated at rods 01 LOCK 34 +0.5 50-0347 +0.5 164 50-0 50 91 LA1=223.5 21 +0.5 +1.5 25-0 Panel Cutout Ts=2 -0.5 135°=23.5mm 90°=16mm2013 For more information about this product line you can visit our website :www.hardwareontime.com

1103 1501 LOCK SW ING HANDLE Zinc die body, Black powder coated or black E-coated. 25 36 GH=18 +0.5 50-0 133 H +0.5 45 50-0 25 88 35 Tringular Ts=2±1 insert 8mm Panel Cutout 25 36 GH=18 +0.5 50-0 133 H +0.5 45 50-0 25Acces s ories r ef. to p age # 35 Tringular1. CAM ref. to page 9A-001 Ts=2±1 insert 8mmR emark Panel Cutout1. Key different on request.2. CH751 key code on request3. Padlockable on request Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control)Cylinder styleHT333 cylinder Padlockable Black E-Coated Black powder coated Black E-Coated Black powder coated Black E-Coated Black powder coatedTriangle insert Without padlock 1103-1001-50-P 1103-1001-10-P 1103-2001-50-P 1103-2001-10-P 1103-3001-50-P 1103-3001-10-P Padlockable 1103-1001-50-NP 1103-1001-10-NP 1103-2001-50-NP 1103-2001-10-NP 1103-3001-50-NP 1103-3001-10-NP Without padlock 1103-1003-50-P 1103-1003-10-P 1103-2003-50-P 1103-2003-10-P 1103-3003-50-P 1103-3003-10-P 1103-1003-50-NP 1103-1003-10-NP 1103-2003-50-NP 1103-2003-10-NP 1103-3003-50-NP 1103-3003-10-NPFor more information about this product line you can visit our website :www.hardwareontime.com 2013

16 1103 ROD CONTROL SWINGHANDLE Zinc die body and rod control,M.S. zinc plated cam,Black powder coated or E-coated surface 01 LOCK 3 90°=16mm LA2=136.5 36 8 25 45 26 15.5 +0.5 50-0133 19 10.8 +0.5 7.8 50-0 25 LA1=211.5 15 Ts=2±1 Panel Cutout 3.5 6 5.2 Square studs 90°=16mm 7.8 14 5.2Hole 4.3 1.2 4.05 7.8 4.5 6 HT333 round cylinder available Round Studs2013 For more information about this product line you can visit our website :www.hardwareontime.com

01 LOCK 1104 17 21 ROD CONTROL SWINGHANDLE 90°=16mm Zinc die body, Black powder coated or satin chrome plated 14 4.5 6 LA2=123.5 347 2-44.5 43 47 145 8.534.5 347 LA1=223.536 26.5 TS=1-4 Panel Cutout 90°=16mm Version A(Cam control) Version B(2P.rod control) Version C(3P.rod control) Satin chrome Black powder coated Satin chrome Black powder coated Satin chrome Black powder coated 1104-1001-40 1104-1001-10 1104-2001-40 1104-2001-10 1104-3001-40 1104-3001-10For more information about this product line you can visit our website :www.hardwareontime.com 2013

18 1105 39 ROD CONTROL SWINGHANDLE Zinc die body, Black powder coated or satin chrome 5.2 24.5 01 LOCK 32 25.5 64 130 21 124 30.5 9.5 20.5 39 90 ° Ts=1-3 Panel Cutout LA2=756 25.5 24.5 90 ° =11mm 12415 21 3 LA1=170 130 Ts=1-3 30.5 9 9.5 Panel Cutout 90 ° =11mm 5.5 3 3 2- 14 Version A(Cam control) Version C(3P.rod control) Satin chrome Black powder coated Satin chrome Black powder coated 1105-1001-40 1105-1001-10 1105-3001-40 1105-3001-102013 For more information about this product line you can visit our website :www.hardwareontime.com

1107 19 ROD CONTROL SWINGHANDLE Black PA housing ; zinc die handle black powder coated ; M.S. zinc plated control at rods01 LOCK 90°=16mm 14 135°=23.5mm 22 15 LA2=147.5 45.75 19 148 148 135°=23.5mm 100 90°=16mm 109 LA1=199.5 36 9.2 3 25 TS=2±1 Panel CutoutAcces s ories r ef. to p age # Version A(Cam control) Version C(3P.rod control)1. CAM ref. to page 9A-001 Black textured powder coated Black textured powder coatedR emark 1107-1001-20 1107-3001-201. Key different on request.2. CH751 key code on requestFor more information about this product line you can visit our website :www.hardwareontime.com 2013

20 1108 ROD CONTROL SWINGHANDLE Black PA housing ; Zinc die handle black powder coated ; M.S. zinc plated control at rods 01 LOCK 2536 20.4215.5 200 1590°=16mm TS=1~4135°=23.5mm 143 2236 6.348 LA2=117215.5 181.5 LA1=230 190135°=23.5mm 15 9.2 90°=16mm TS=2±0.5 25 Version A(Cam control) Version C(3P.rod control) Acces s ories r ef. to p age # Black textured powder coated 1. CAM ref. to page 9A-001 1108-1001-20 Black textured powder coated 1108-3001-20 R emark2013 1. Key different on request. 2. CH751 key code on request For more information about this product line you can visit our website :www.hardwareontime.com

1109 21 ROD CONTROL SWINGHANDLE ABS panel and dustproof cap and cylinder, M.S. zinc plated cam and control at rods.01 LOCK 15mm 25 10 2.5 122 GH=18 7 5.5 3- 117 15mm 41 4.5 50 50 43.5 90° 28 188 H=22 7 4.5 0 18.5 Ts=2-0.5 Panel Cutout 2.5 25 4- 6 10 Plastic plate Aluminium alloy plate 1109-01 1109-02For more information about this product line you can visit our website :www.hardwareontime.com 2013

22 1113 90°=16mm 135°=23.5mm ROD CONTROL SWINGHANDLE LA2=123.5 Black PA body, zinc die handle powder coated, zinc die shaft and rod control, m.s. zinc plated at rods 01 LOCK 3 Rod controller +0.5 50-0160 347 LA1=223.5 +0.5 50-0 50 0 Ts=2-0.5 +0.5 36 25-0 135°=23.5mm Panel Cutout 90°=16mm Version B（2P.rod cotrol） Version C(3P.rod control) Acces s ories r ef. to p age # 1113-2001-01 1113-3001-01 1. CAM ref. to page 9A-0012013 R emark 1. Key different on request. 2. CH751 key code on request 3. Padlockable on request For more information about this product line you can visit our website :www.hardwareontime.com

1114 23 ROD CONTROL SWINGHANDLE Black PA body, zinc die shaft and rod control zinc plated, m. s. zinc plated at rods01 LOCK 347 14 90°=16mm LA2=123.5 160 36 135°=23.5mm 100 30 90° +0.5 6 50-0 LA1=223.5 +0.5 347 50-0 50 21 135°=23.5mm +0.5 3 90°=16mm 25-0 Panel CutoutAcces s ories r ef. to p age # Version B（2P.rod cotrol） Version C(3P.rod control)1. CAM ref. to page 9A-001 1114-2001-01 1114-3001-01R emark1. Key different on request.2. CH751 key code on requestFor more information about this product line you can visit our website :www.hardwareontime.com 2013

24 1116 16 SWINGHANDLE 34 16 Black PA 30 % GF Shaft 01 LOCK141 +0.5 31.5 50-0 M8 +0.5 8 25-0 Slide Dust cover +0.5 50-0 PA cover +0.5 0 25-0 Ts=2-0.5 37 21.5 24 Panel cutout 34141 31.5 Slide dust cover Hook 2 24 Hook Mounting style 1116- 1001- C Acces s ories r ef. to p age # Mounting by cap 1116- 1011- C 1. CAM ref. to page 9A-001 Mounting by hook R emark2013 1. Key different on request. 2. CH751 key code on request For more information about this product line you can visit our website :www.hardwareontime.com

1190-1191 25 ROD CONTROL Zinc die body ,zinc plated. M.S. zinc plated at rods01 LOCK 1190 1191 3 3 4.5 90°=16mm 4.5 4.5 4.5 6 135°=24mm 6 LA2=136.5 14 90°=16mm 14 135°=24mm LA2=124 1.5 1.5 4.5 27.3 27.3 17 4.5 17 50 22 25 38 38 22 54 54 5 5 □8 □8 LA1=224 LA1=211.5 90°=16mm 1 6 90°=16mm 1 6 135°=24mm 135°=24mm 3 3 4.3 1.2 4.3 7 1.2 RoundStuds 7 RoundStuds 25 +0.5 +0.5 50-0 50-0 +0.5 7.76 +0.5 50-0 50 3.5 50-0 25 6 7.8 7.8 Square Studs 5.2 Hole 5.2 +0.5 25 25-0 For cutout:Version A For cutout:Version BRivet Style For cutout:Version A For cutout:Version BRound Studs 1190-01 1191-01Square Studs 1190-02 1191-025.2 Hole 1190-03 1191-03For more information about this product line you can visit our website :www.hardwareontime.com 2013

26 1192-1194 1192 ROD CONTROL 27 8.1 Zinc die body, zinc plated. M.S. zinc plated at rods 01 LOCK 6 LA2=62.5 22 90°=16mm 135°=23.5mm125 8.1 38 54 LA1=62.5 GH=23 135°=23.5mm 90°=16mm 14 5.2 4.05 3.57.8 7.8 6 6 4.5 7.7 7.8 1.2 6 4.3 5.2 Hole Square Studs Round Studs1194 2 4.5 5 □8 LA1=62.5 LA1=62.554 90°=16mm +0.5 38 135°=24mm 50-0 54 17 LA2=62.5 LA2=62.5 +0.5 27.3 90°=16mm 25-0 3 135°=24mm For cutout:Version C Rivet Style 5 Round Studs 14 Square Studs 5.2 Hole 222013 For cutout:Version C For cutout:Version C 1192-01 1194-01 1192-02 1194-02 1192-03 1194-03 For more information about this product line you can visit our website :www.hardwareontime.com

1193 27 ROD CONTROL 22 GH=23 Zinc die body , zinc plated .M.S. zinc plated rods01 LOCK 16.3 9 3 LA2=123.5 6 173.5 LA2=123.5 90°=16mm27 LA2=123.5 135°=23.5mm 90°=16mm 135°=23.5mm 4.4 23.68 23.4 347 38 17.8 LA1=223.5 2754 22 50 347 14 347 8 LA1=223.5 LA1=223.5 38 135°=23.5mm 135°=23.5mm 90°=16mm 347 90°=16mm 173.5 54A 3 6 B 21.3 3.3 9.8 LA2=123.5 173.5 2.9 90°=16mm 4.05 7.8 7.8 6 4.5 27 LA2=123.5 135°=23.5mm 1.24.3 6 7.8 8 22 38 Round Studs 7.7 GH=2354 5.2 347 LA1=223.5 5.2Hole LA1=223.5 50 135°=23.5mm 3.5 90°=16mm 347 173.5 Square StudsC 20136 D 6Rivet Style For cutout:Version AVersion A 1193-01Version B 1193-02Version C 1193-03Version D 1193-04 For more information about this product line you can visit our website :www.hardwareontime.com

28 1189 Version A PROFILE CYLINDER Zinc die body,bright chrome plated 01 LOCKVersion B 40 17Version A 33.5 10 19 30.5 20 20 M5 6 17 9 R15Version B 10 M5 19 30.5 Insert type 40 Alike HT333 Double Bit 3mm Version A Version B Double Bit 4mm Double Bit 5mm 1189-333-A 1189-333-B 2×4 Slot 1189-013-A 1189-013-B 2×4 Slot coin proof 1189-014-A 1189-014-B Triangular 7mm 1189-015-A 1189-015-B Triangular 8mm 1189-024-A 1189-024-B Square 7mm 1189-124-A 1189-124-B Square 8mm 1189-037-A 1189-037-B Square 7mm with slot 1189-038-A 1189-038-B Square 8mm with slot 1189-047-A 1189-047-B Female square 8mm 1189-048-A 1189-048-B Hexagon femalel 8mm 1189-147-A 1189-147-B Hexagon femalel 9mm 1189-148-A 1189-148-B Hexagon femalel 8mm with3mm 1189-248-A 1189-248-B Hexagon malel 10mm 1189-168-A 1189-168-B 1189-169-A 1189-169-B2013 1189-268-A 1189-268-B 1189-360-A 1189-360-B For more information about this product line you can visit our website :www.hardwareontime.com

1201 29 SWINGHANDLE LOCK PA black plastic or zinc die housing, zinc die handle black powder coated, zinc die shaft and m.s. zinc plated xing parts.01 LOCK GH=18 Rubber sealing or EPDM foam sealing 59 +0.5 50 30 50-0 90° 160 150 +0.5 50-0 50 11.2 +0.5 36 25 25-0 22 Ts=1-3 Panel Cutout 36 36 GH=20 Rubber sealing or EPDM foam sealing 100 30 160 100 30 160 59 150 18 12.2 Padlockable version 11.2 25 22 Ts=1-3 Panel CutoutAcces s ories r ef. to p age # Large size GH=18 Zinc die handle,PA housing Full Zinc Die1. CAM ref. to page 9A-001 Large size GH=20 1201-01-0220 1201-01-0118R emark 1201-01-01201. Key different on request.2. CH751 key code on request3. Padlockable on requestFor more information about this product line you can visit our website :www.hardwareontime.com 2013

30 1201 SWINGHANDLE LOCK Black PA or zinc die lock housing, zinc die handle black powder coated,zinc die shaft and m.s. zinc plated xing parts. 01 LOCK 36 GH=20 Rubber sealing or Panel Cutout EPDM foam sealing 30 120 100 25 9.1 +0.5 Ts=1-3 25-0 Small size Zinc die handle,PA housing Full Zinc Die Full PA 1201-02-0120 1201-02-0220 1201-02-0320 36 GH=18 18 160 +0.5 100 30 50-090° 8 150 +0.5 50-0 50 23 21 25 +0.5 25-0 Panel Cutout Acces s ories r ef. to p age # 1. CAM ref. to page 9A-001 Black PA body, zinc die, shaft and m.s. zinc plated xing parts. R emark PA handle and housing 1. Key different on request. 1201-01-0320 2. CH751 key code on request Code mode2013 For more information about this product line you can visit our website :www.hardwareontime.com

1205 3101 LOCK SWINGHANDLE LOCK Stainless steel Ts=1.5-6 68 32 13 137 21 □8=M10 13 GH=18 12.5 11 9 22.5 20 22.5 80 8.5 Panel Cutout 304 SUS304 316 SUS316 1205-304 1205-316For more information about this product line you can visit our website :www.hardwareontime.com 2013

32 1222 01 LOCK 73 7.5 PUSHBUTTON LOCK 90° GH=34 Zinc die ; M.S. zinc plating cam. 2-R13.5 45 17 45° 142 108 32 Button 27 Square type Panel Cutout 3173 Ts=1-10 7.5 2-R13.5 GH=34 45 17 142 10890° 45° PUSH Button 27 Panel Cutout 32 31 Round type Ts=1-10 Square type Satin chrome Black powder coated Acces s ories r ef. p age# Round type 1.Cam ref. to page 9A-003 1222-01-40 1222-01-102013 1222-02-40 1222-02-10 For more information about this product line you can visit our website :www.hardwareontime.com

1240 33 COMPRESSION LATCH 2013 Zinc die handle and housing black powder coated or bright chrome; M.S. zinc plated cam and shaft01 LOCK H1 29.5 4-R3 34 BH BH H2Grip-Range 24.5Pawl Forward 21 MIN~MAX 85 6~16 18.5 Handle 72.5 72.5 72.5 16~26 8 26~36 16 6~16 16~26 Mounting bracket 26~36 360° 21.5 6~16 16~26 40 H1 Panel cutout 26~36 Non-locking BH BH H2 29.5 4-R3 34 21 24.5 85 Handle 18.5 Panel cutout 8 16 Mounting bracket 360° 21.5 40 Key locking H1 29.5 4-R3 34 BH BH H2 24.5 21 85 Handle 18.5 8 16 Mounting bracket 40 360° 21.5 Panel cutout Tooling-Secured Pawl Reversed Cylinder Style Black powder coated Bright Chrome MIN~MAX Non-locking 56~66 Key locking 1240-00-110 1240-00-130 46~56 Tooling-Secured 1240-00-210 1240-00-230 36~46 1240-00-310 1240-00-330 56~66 1240-10-110 1240-10-130 46~56 1240-10-210 1240-10-230 36~46 1240-10-310 1240-10-330 56~66 1240-11-110 1240-11-130 46~56 1240-11-210 1240-11-230 36~46 1240-11-310 1240-11-330For more information about this product line you can visit our website :www.hardwareontime.com

34 1241 COMPRESSION LATCH Zinc die handle and housing black powder coated or bright chrome; M.S. zinc plated cam and shaft 01 LOCK 34 H1 30 27.5 BH BH H2 4-R2 36 22 Key locking79 18 8 16 73 Handle Mounting bracket 360° 3.5 25 Panel cutout Grip-RangePawl Forward Pawl Reversed Black powder coated Bright Chrome Cylinder Style 1241-00-110 1241-00-130 MIN~MAX MIN~MAX 1241-00-210 1241-00-230 1241-00-310 1241-00-330 6~16 56~66 1241-10-110 1241-10-130 1241-10-210 1241-10-230 16~26 46~56 Non-locking 1241-10-310 1241-10-330 26~36 36~46 1241-11-110 1241-11-130 1241-11-210 1241-11-230 6~16 56~66 1241-11-310 1241-11-330 16~26 46~56 Key locking 26~36 36~46 6~16 56~66 16~26 46~56 Tooling-Secured 26~36 36~46 35.5 20.5 Tight nut 12.4 2 8.845 12 +0.5 41+0.2 1.5 Handle Mounting bracket +0.2 17.5 21.4 360° H=14-20 10.5 Panle cutoutZinc die handle and housing black powder coated; M.S. zinc plated cam and shaft Small size 1241-022013 For more information about this product line you can visit our website :www.hardwareontime.com

1242 35 LEVER LATCH Zinc die handle housing and trigger black powder coated or bright chrome; M.S. zinc plated screw and xing parts01 LOCK 93 16 H=35/57 Door frme M5X35 Ts 25 Mounting Handle Panel Cutout 86 86 86 bracket Trigger Flush trigger 34 22 39.5 93 H=35/57 Door frme 16 Ts M5X35 Handle Mounting Trigger bracket Raised trigger 34 22 7 25 39.5 Panel Cutout H=35/57 Door frme 93 Ts 16 Handle M5X35 Mounting bracket Trigger Key locking 34 22 7 25 39.5 Panel CutoutGrip-Range 1~24 23~46Trigger Style Short Arm Longer ArmNon-locking raised triggerNon-locking Flush trigger Black powder coated Bright Chrome Black powder coated Bright Chrome(CH751) Key locking(HT333) Key locking 1242-124-10 1242-124-30 1242-146-10 1242-146-30Tooling-Secured 1242-224-10 1242-224-30 1242-246-10 1242-246-30 1242-324-10 1242-324-30 1242-346-10 1242-346-30 1242-424-10 1242-424-30 1242-446-10 1242-446-30 1242-524-10 1242-524-30 1242-546-10 1242-546-30For more information about this product line you can visit our website :www.hardwareontime.com 2013

36 1243-1244 LEVER LATCH Zinc die handle ,housing and button; m.s. zinc plated xing parts. 01 LOCK 13 10 H Door frame Door frame 8 H1 Door82 19 2~12 76.5 Handle Trigger 30 2.5 23.5 16.5 Ts Panel cutout 33.5 41.5 Grip-Range 1~24 23~46 Non-locking raised trigger Longer Arm Short Arm 1243-146 1243-124 9.6 48 Door frme Ts 24 Handle Panel Cutout Trigger Mounting bracket 35 Mounting bracket 42 Key locking106 11 106 11 M5X35 97 Trigger 35 42 Non-lockingZinc die handle housing and button; M.S. zinc plated xing parts. Key Locking 1244-10 Non-Locking 1244-002013 For more information about this product line you can visit our website :www.hardwareontime.com

1245 37 LEVER LATCH M.S. zinc plated xing parts Zinc die handle housing and trigger01 LOCK 110 15 110 15 50 50 E 29 Mounting 0 bracket Fixing screw 35-0.5 Grip Range A 24 20 B 4-R3 85 14 20 0 C Max panel Ts, ref. 22 90-0.5 to bellow table 3 D 20 3 30 Panel cutoutMounting Panel thickness Grip Range E bracket MIN MAX Non-locking CH751 key locking,with shutter CH751 key locking Tooling-secured MIN MAX A 1 14 29 1245-114-201 1245-214-201 1245-314-201 1245-414-201 B 1 11 14 29 A 11 21 1245-114-202 1245-214-202 1245-314-202 1245-414-202 B 1 11 29 45 C 11 21 1245-129-201 1245-229-201 1245-329-201 1245-429-201 A 21 31 45 57 B 1 11 44 1245-129-202 1245-229-202 1245-329-202 1245-429-202 C 11 21 D 21 31 1245-129-203 1245-229-203 1245-329-203 1245-429-203 A 31 41 B 1 11 1245-145-201 1245-245-201 1245-345-201 1245-445-201 C 11 21 D 21 31 60 1245-145-202 1245-245-202 1245-345-202 1245-445-202 31 41 1245-145-203 1245-245-203 1245-345-203 1245-445-203 1245-145-204 1245-245-204 1245-345-204 1245-445-204 1245-157-201 1245-257-201 1245-357-201 1245-457-201 72 1245-157-202 1245-257-202 1245-357-202 1245-457-202 1245-157-203 1245-257-203 1245-357-203 1245-457-203 1245-157-204 1245-257-204 1245-357-204 1245-457-204 For more information about this product line you can visit our website :www.hardwareontime.com 2013

38 1246 LEVER LATCH Zinc die handle housing and trigger M.S. zinc plated xing parts 01 LOCK 12.15 7 H Screw Ts 4.3 25 B 84.5 84.5 84.5 71 71 40 30 Panel cutout 12.15 7H 25 Ts Screw 4.3 B 84.5 Trigger Mounting bracket 40 30 Lock cylinder 27.15 7H Panel cutout 12 Ts 25 Screw 4.3 B 84.5 Trigger 84.5 71Lock cylinder 40 Mounting bracket 30 Panel cutout Black powder coated Satin Chrome Panel Thickness Grip Range H B Non-locking CH751 locking Non-locking CH751 locking with shutter with shutter 1 to 11mm 1-25mm 36.50 13.50 1246-100-40 1 to 11mm 15-30mm 40.00 28.50 1246-100-10 1246-110-10 1246-200-40 1246-210-40 1246-200-10 1246-210-10 1246-210-402013 For more information about this product line you can visit our website :www.hardwareontime.com

1250-1251 39 25.5 SLAM LATCH01 LOCK 22 4.5 8.5 43.2 13.6 21 6.5 38.5 2 19.4 13 28 Ts=1.5 Panel Door Black PA 1250-20 12.7 25.5 25 6.7 6MM 46.9 47 38 20 Ts=1.5 Panel door 28 Black ABS 1251-20For more information about this product line you can visit our website :www.hardwareontime.com 2013

40 1252 Key locking 19 SLAM LATCH Black PA+GF 34 01 LOCK 13.3 67.5 +0.2 49 29 49-0 11 21 45° +0.2 Ts=1.2-1.4 30.6-030 2Non-locking 13.3 19 67.5 +0.2 34 49 29 49-0 11 21 45° +0.2 Ts=1.2-1.4 30.6-030 2 Key locking 1252-10 Non-locking 1252-002013 For more information about this product line you can visit our website :www.hardwareontime.com

1256 41 SLAM LATCH Stainless stell 316 or ABS01 LOCK Panel Ts 61 See table 3 14 35 Mounting bracket Screw Key locking 8.5X5.5 12 16.2 61 33 33 20 61 12 20 33 16.2 3316.2 33 12 20 16.2 Keeper Panel thickness Mounting braketheight Fixingscrew length Key Locking version Non-locking versionMIN MAX Stainless steel Acetal black Acetal Grey Stainless steel Acetal black Acetal Grey 27 7 12 14 16 1256-10-2-SUS 1256-10-2-PAB 1256-10-2-PAG 1256-00-2-SUS 1256-00-2-PAB 1256-00-2-PAG 12 17 14 20 1256-10-7-SUS 1256-10-7-PAB 1256-10-7-PAG 1256-00-7-SUS 1256-00-7-PAB 1256-00-7-PAG 17 22 3.8 16 1256-10-12-SUS 1256-10-12-PAB 1256-10-12-PAG 1256-00-12-SUS 1256-00-12-PAB 1256-00-12-PAG 3.8 20 1256-10-17-SUS 1256-10-17-PAB 1256-10-17-PAG 1256-00-17-SUS 1256-00-17-PAB 1256-00-17-PAGFor more information about this product line you can visit our website :www.hardwareontime.com 2013

42 1261 Big size OVER-CENTER DRAW LATCH Zinc die, black powder coated or chrome plated 01 LOCK 24 16 2- 3.276 20.5 12 16.8 12 35.5 6- 3.2 12 35.5 4- 3.2 16 32 Panel CutoutSmall size 20 21 12 6- 3.264.5 17.5 12 30 6- 3.2 12 30 16.5 12 12 26.5 17.5 Panel Cutout Black powder coated Big size Key Locking Non-Locking Satin chrome Small size2013 Big size 1261-110-10 1261-100-10 Small size 1261-210-10 1261-200-10 1261-110-40 1261-100-40 1261-210-40 1261-200-40 For more information about this product line you can visit our website :www.hardwareontime.com

1271 43 OVER-CENTER DRAW LATCH Zinc die ,black powder coated or bright chrome01 LOCK 33 31.5 25.4 22 6-M5 17.5 25.4 25.4 9.5 9.5 127 22 155.4 17.9 Key Locking 31.5 25.4 22 6-M5 17.5 25.4 25.4 9.5 9.5 52 127 22 155.4 17.9 25.4 Non -Locking 6-M5 25.4 25.4 9.5 Panel cutout CH751 Locking Black powder coated Bright Chrome Non-locking 1271-10-10 1271-10-30 1271-00-10 1271-00-30For more information about this product line you can visit our website :www.hardwareontime.com 2013