LED FLEXLINES
“Everyone saidit was impossible, until TOTALLUX stopped by. They didn’t know the word impossible.”
TOTALLUX B.V. is a Dutch company established in 2003. We develop and supplycustom made and standard LED lighting solutions for the national and internationalSuper Yacht Industry. Our experienced and devoted team works very close togetherwith our clients to get the best result. Our team is wel able to listen and to guide ourcustomers ideas and wishes into reality.Our TOTALLUX team likes to be challenged!TOTALLUX is specialized in standard and custom made Yacht LED and lightingsolutions and are working very closely with worlds finest yacht builders. TOTALLUX B.V. Antennestraat 68 • 1322 AS Almere • The Netherlands TEL +31 (0)36 529 1756 • FAX +31 (0)36 529 1757 [email protected] • www.totallux.nlINDEX 10 x 10 mm Pages 04—11 9 x 18 mm Pages 12—23TLX8 Pages 24—41TLX10 11,5 x 21 mm Pages 42—51TLX15 13,5 x 6 mm Pages 52—65TLX17 16 x 17 mm Pages 66—71TLX22 10 x 10 mm TLX30 WWW.TOTALLUX.NL 3
TLX8
LED Flexlines 2018 TLX8TLX8 is a member of the TLX LED Flexlines series Wavewith monochromatic light to achieve your desired Curveartistic effect. Its exceptionally small physical sizeand two bending versions allow you to create any 10mmcustom design applcations and facilitate additional 10mmtypes of applications where a smaller profile isrequired.The TLX LED Flexlines series will be available in SILICONE in 2018.Art: 50.02.1000 TLX8 Flexline IP65 24V 144 LEDs/m 4,5 W/m 2700K CurveArt: 50.02.1001 TLX8 Flexline IP65 24V 144 LEDs/m 4,5 W/m 3000K CurveArt: 50.02.1003 TLX8 Flexline IP65 24V 144 LEDs/m 4,5 W/m 4000K CurveArt: 50.02.1010 TLX8 Flexline IP65 24V 144 LEDs/m 4,5 W/m 2700K WaveArt: 50.02.1011 TLX8 Flexline IP65 24V 144 LEDs/m 4,5 W/m 3000K WaveAccessoriesArt: 50.16.0605 TLX8 Flexline IP40 24V Connection cable swivel 30cm type 1 CurveArt: 50.16.0606 TLX8 CurveArt: 50.16.0615 TLX8 Flexline IP40 24V Connection cable swivel 30cm type 2 Art: 50.16.0625 TLX8 WaveArt: 50.16.0626 TLX8 Flexline IP40 24V Endcap WaveArt: 50.03.3055 TLX8 Art: 50.16.0645 TLX8 Flexline IP40 24V Connection cable swivel 30cm type 1 Art: 50.16.0646 TLX8 Flexline IP40 24V Connection cable swivel 30cm type 2 Flexline PC U-profile, 1,5 meter, transparant Flexline DUPLEX profile, 1 meter Flexline DUPLEX profile, 2 meterOn request: customized length + injected connection cable + injected endcap + color temperature (Kelvin). WWW.TOTALLUX.NL 5
TLX8 LED Flexlines 20181. Specifications & Parameters1.1 Dimensions of Light D:100mmTLX8-VB (Wave) TLX8-HB (Curve) 10mm 10mm Light Surface Note: Unless other wise stated, the tolerance of the light is ±0.3mm.Light Surface1.2 Technical ParametersTechnical ParametersArticle No. TLX8-D24CVColor Red/Green/Blue/Amber/WhiteWorking Voltage DC24VRated Power/m 4.5WLED Qty/m 144LEDsLED Distance 6.9mmMin. Cutting Unit 12LEDs (1unit)Min. Cutting Length 83.3mm(1unit)Continuous Length 10mWeight/m 140gStoring Temp. -20~60℃Environmental Working Tempeature -20~45℃Environmental Installation Tempeature 0~45℃IP Rating IP651.3 Optical ParametersArticle No. TLX8-24CV Lumen/m Color CCT Lumen/m Candle power distributionLED Type SMD >50lm 2500K 2460±120K >140lm Illuminance CharacteristicsBeam angle 160° >200lm 2700K 2725±145K >140lmColor CCT >30lm 3000K 3045±175K >140lmRed 620-630nm >50lm 3500K 3465±245K >140lmGreen 520-530nm 4000K 3985±275K >140lmBlue 465-475nm 4500K 4503±243K >140lmAmber 585-595nm 5000K 5029±283K >140lm 5700k 5669±355K >140lm 044 www.totallux.nl6 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX82. Functions & Features2.1 Product Features1. High quality and high brightness SMD LED chip, each two LEDs circuit protected.2. Smallest square physical size 10*10mm to enable new applications.3. Wide range of solid white color options.4. Horizontal and vertical bending optional for easily custom design.5. UV & flame resistant construction(PVC).6. High color consistency & smooth illumination with non visible light dots.7. Super flexible with 100mm minimum bending diameter.8. Innovative mounting profiles and mini connectors for easy installation.9. Continuous length up to 10m by powering one end.10.Low power consumption, low heat, energy efficient & environmentally friendly.11. Automated production, high reliability & long warranty.12. 5 years life span (Do not continuously operate over 8 hours per day).2.2 Minimum Bend Diameter TLX8-HB (Curve)TLX8-VB (Wave) Light Surface100 mm 100 mm Light SurfaceThe light can only be bent along the light surface. Do not bend smaller than allowed minimum bend diameter.3. Types of Connector3.1 Injection-moulded Connector Note: Unless other wise stated, the tolerance of the connector is ±0.5mm. Injection-moulded Front 10mm 16mm Connector (bottom) Φ12mm 2mm Connects light to power supply with 12mm pre-installed bottom feed cable IP40. 8mm Available in 0.3m, 1m, 3m, 5m, 10m, 2mm 15m, 20m lengths.05 www.totallux.nl WWW.TOTALLUX.NL 7
TLX8 LED Flexlines 2018 Injection-moulded Front 12mm Connector (side) 12mm Connects light to power supply with 2mm pre-installed side feed cable, IP40. Available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m lengths. 8mm 12mm Injection-moulded Front 8mm 3mm 16mm Connector (end) 16mm 10mm Connects light to power supply with 12mm pre-installed end feed cable, IP40. Available in 0.3m, 1m, 3m, 5m, 10m, 2mm 15m, 20m lengths. Injection-moulded 2mm 10mm End Cap 2mm Pre-installed termination protection 12mm of the light, IP40. 12mm 16mm3.2 Dual Injection-moulded Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Dual Injection-moulded 14mm 22mm Front Connector (bottom) 4mm Connects light to power supply with 15mm 16mm 14mm10mm pre-installed bottom feed cable, IP65. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 12mm Dual Injection-moulded 12mm 15mm 22mm Front Connector (side) 4mm Connects light to power supply with 16mm pre-installed side feed cable, IP65. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 16mm 14mm 10mm Dual Injection-moulded 12mm 15mm 22mm Front Connector (top end) 5mm Connects light to power supply with 16mm pre-installed end feed cable, IP65. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 14mm 10mm 14mm 06 www.totallux.nl Dual Injection- 22mm moulded End Cap8 WWW.TOTALLUX.NL 4mm Pre-installed termination protection of the light, IP65. 16mm 16mm
pre-installed end feed cable, IP65. 16 14mm LED Flexlines1240m1m810mmTLX8 Cable length available in 0.3m, 1m, 16mm 3m, 5m, 10m, 15m, 20m. 16mm22mm Dual Injection- 4mm moulded End Cap Pre-installed termination protection of the light, IP65. 10mm 14mm 14mm3.3 Swivel Connector Note: Unless other wise stated, the tolerance of the connector is ±0.5mm. Swivel Front Connector 13mm 6mm (top end) 10.7mm Connects light to power supply, IP20. DIY connector. Cable available in 0.3m, 1m lengths. 30mm Swivel Front Connector 13mm 6mm (side right/left) 10.5mm Connects light to power supply, IP20. DIY connector. Cable available in 0.3m, 1m lengths.R L 30mm07 www.totallux.nl Swivel Front Connector 13mm 6mm (bottom) 10.5mm Connects light to power supply, IP20. DIY connector. Cable available in 0.3m, 1m lengths. 13mm 30mm 6mm Swivel End Cap 10.5mm Termination protection of the light, IP20 DIY connector. 30mm WWW.TOTALLUX.NL 9
TLX8 LED Flexlines 20184. Mounting Profile 4.1 Plastic & Aluminum Combination Profile 14.7mm 14mm L2 L1Note: Unless other wise stated, the tolerance of the profile is ±0.5mm.Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number Φ3.5mm 35 17.5 / Φ3.5 1TLX8-PA/PL 14*14.7 500 50 200 Φ3.5 3 For Product 1000 100 200 Φ3.5 5 TLX8 2000 100 200 Φ3.5 10 TLX8 TLX8 TLX85.PackagingPackaging Method Plastic Plate White Box CartonPackaging DetailLight Length White Box Dimension(cm) Carton Dimension(cm) Numbers of White Box Carton Weight(KG)10m 46*3.5*56 58*49*5.3 1 210m 46*3.5*56 58*48*21 5 820m 57.5*3.5*68 70*60.5*5.3 1 420m 57.5*3.5*68 70*59.5*21 5 16 09 www.totallux.nl10 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX8 WWW.TOTALLUX.NL 11
TLX10
LED Flexlines 2018 TLX10TLX10 is a member of the TLX LED Flexlines 18mmseries with a small smooth flat exterior that allowsmost flexible and adaptable manipulations forvisually appealing shapes and produces superiorhomogenized illumination along its full length.The TLX LED Flexlines series will be available in SILICONE in 2018. 9mmArt: 50.02.0505 TLX10 Flexline IP68 24V 72 LEDs/m 4,6 W/m 3000K Art: 50.02.0506 TLX10 Flexline IP68 24V 72 LEDs/m 4,6 W/m 4500K Art: 50.02.0510 TLX10 Flexline IP68 24V 72 LEDs/m 4,6 W/m 3500K Art: 50.02.0511 TLX10 Flexline IP68 24V 72 LEDs/m 4,6 W/m 2700K Art: 50.02.0530 TLX10 Flexline IP68 24V 72 LEDs/m 3,5 W/m REDAccessoriesArt: 50.16.0424 TLX10 Flexline Aluminium U-profile, 1 meterArt: 50.16.0425 TLX10 Flexline Self lock Aluminium U-profile, 1 meterArt: 50.16.0427 TLX10 Flexline Polycarbonate U-profile, 1 meterArt: 50.16.0428 TLX10 Flexline Polycarbonate U-profile, 2 meterArt: 50.16.0510 TLX10 Flexline IP68 24V Connection cable 30cm type 1 (SNAP)Art: 50.16.0511 TLX10 Flexline IP68 24V Connection cable 30cm type 2 (SNAP) Art: 50.16.0515 TLX10 Flexline IP68 24V Endcap type 1 (SNAP)Art: 50.16.0516 TLX10 Flexline IP68 24V Endcap type 2 (SNAP)On request: customized length + injected connection cable + injected endcap + color temperature (Kelvin). WWW.TOTALLUX.NL 13
TLX10 LED Flexlines 20181. Specifications & Parameters D: 90mm Beam Angle 10%1.1 Dimensions of Light 18mm 9mm Note: Unless other wise stated, the tolerance of the light is ±0.3mm.1.2 Technical ParametersTechnical Parameters TLX10-24CV TLX10-24CV-R90 TLX10-24CV-R80Article No. Red/Amber White Green/Blue/WhiteColor DC24V DC24V DC24VWorking Voltage 3.5W 4.5W 4.5WRated Power/m 72 72 72LED Qty/m 13.89mm 13.89mm 13.89mmLED Distance 9LEDs(1unit) 6LEDs(1unit) 6LEDs(1unit)Min. Cutting Unit 125mm(1unit) 83.3mm(1unit) 83.3mm(1unit)Min. Cutting Length 20m 15m 15mContinuous Length 210gWeight/m -20 ~ 60℃Storage Temperature -20 ~ 45℃Environmental Working Temperature 0 ~ 45℃Environmental Installation Temperature IP68IP Rating1.3 Optical ParametersArticle No. TLX10 TLX10-24CV-R90 TLX10-24(12)CV-R80LED Type SMDBeam angle 160° SMD SMDColor WavelengthRed 620-630nm 160° 160°Green 520-530nmBlue 465-475nm Lumen/m Color CCT Lumen/m CCT Lumen/mAmber 585-595nm >45lm 2500K >80lm 2700K 2460±120K >90lm 2460±120K >110lm >15lm 3000K >50lm 3500K 2725±145K >90lm 2725±145K >110lm 4000K 4500K 3045±175K >90lm 3045±175K >120lm 5000K 5700K 3465±245K >100lm 3465±245K >120lm 6500K 3985±275K >100lm 3985±275K >120lm 4503±243K >100lm 4503±243K >120lm 5028±283K >100lm 5029±283K >120lm 5669±355K >110lm 6532±510K >110lm 044 www.totallux.nl14 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX102. Functions & Features2.1 Product Features1. High quality and high brightness SMD LED chip.2. Protection Circuit: Each LED Protected.3. Variety of monochromatic lights for option including Red, Green, Blue, Amber and White light.4. UV & flame resistant construction(PVC).5. Flat profile, good choice for recessed mounting.6. High color consistency & smooth illumination with invisible light dots.7. Ultra flexible with 90mm minimum bending diameter.8. Easy installation and assembly with DIY accessories for joining and terminating.9. High IP rating(IP68).10.The product IP rate is ultimately in line with properly applied IP rated connectors.11. Continuous length up to 20m (R, A )/ 15m (G, B, W) by powering one end.12. Environmentally friendly & energy efficient.13. Automated production, high reliability & long warranty.14. 5 years life span (Do not continuously operate over 8 hours per day).2.2 Minimum Bend Diameter Light Surface Φ90 mm 01|0201|0021|02 01|02 Do not bend smaller than allowed minimum bend diameter. Light SurfaceThe light can only be bent laterally(opposite bend along to light surface).3. Types of Connector3.1 Injection-moulded Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Injection-moulded Front 9mm 14mm Connector (bottom) 2mm Connects light to power supply with 31mm pre-installed bottom feed cable, IP67. 20mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 11mm Φ12mm05 www.totallux.nl WWW.TOTALLUX.NL 15
TLX10 LED Flexlines 2018 18mm 9mm 2mm 11mm 11mm Injection-moulded Front 12mm Connector (side) 9mm 14mm 11mm 5mm Connects light to power supply with pre-installed side feed cable, IP67. 18mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Φ12mm 9mm 22mm 2mm Injection-moulded Front Connector (top end) 12mm Connects light to power supply with 16mm pre-installed end feed cable, IP67. 18mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 11mm 11mm Injection-moulded 2mm 9mm Middle Feed Connector 18mm Connects light to power supply with pre-installed end feed cable, IP67. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Injection-moulded End Cap Pre-installed termination protection of the light, IP67.3.2 Dual Injection-moulded Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Dual Injection-moulded 15mm 42mm 2mm Front Connector (bottom) 27mm Connects light to power supply with 44mm 20mm 2mm pre-installed bottom feed cable, IP68. 24mm 2mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Φ15mm Dual Injection-moulded Φ15mm 2mm Front Connector (side) 22mm Connects light to power supply with pre-installed side feed cable, IP68. 2mm 2mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 15mm 20mm 27mm 42mm 06 www.totallux.nl16 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX10 Dual Injection-moulded 2mm 2mm Front Connector (top end) 22mm 2mm Connects light to power supply with Φ15mm pre-installed end feed cable, IP68. 15mm 20mm 20mm Cable length available in 0.3m, 1m, 2mm 42mm 3m, 5m, 10m, 15m, 20m. 13mm Dual Injection- moulded End Cap 22mm Pre-installed termination protection of the light, IP68. 2mm 27mm3.3 Clasp Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Clasp Front Connector 61mm 20mm 28mm Connects light to power supply. IP67 DIY connector. Cable length available 14mm in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Feed connector*1 (Two-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 Clasp End Cap 47.5mm 20mm 15mm Termination protection of the light. IP67 DIY connector. 14mm Tail plug*1 L Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 Clasp Jumper Connects two pieces of lights together with a flexible cable. IP67 DIY connector. L available in 0.3m, 1m and 3m. Double-end feed connector*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 Clasp Power T-feed 50mm Connects two pieces of lights together L2 with a T joint, energized from middle. L1 IP67 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*207 www.totallux.nl WWW.TOTALLUX.NL 17
TLX10 LED Flexlines 2018 Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. 3.4 Snap Connector Snap Front Connector(top end) 19.6mm Connects light to power supply. IP67 24.5mm DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 17.5mm 52.5mm Feed connector*1 (Two-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 Snap Front Connector(side right/left) Connects light to power supply. IP67 17.5mm DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Feed connector*1 (Two-pin) 24.5mm 28mm 58.5mm Silicone gasket*1 U steel plate*1R L Anti-skidding clip*1 PC cover*1 Snap Front Connector(bottom) 17.5mm Connects light to power supply. IP67 24.5mm 28mm DIY connector. Cable length available 58.5mm in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 19.6mm Feed connector*1 (Two-pin) Silicone gasket*1 24.5mm 50mm U steel plate*1 17.5mm Anti-skidding clip*1 PC cover*1 Snap End Cap Termination protection of the light. IP67 DIY connector. Tail plug*1 Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 Snap Jumper L Connects two pieces of lights together L2 with a flexible cable. IP67 DIY connector. L1 L available in 0.3m, 1m and 3m. 50mm Double-end feed connector*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 Snap Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP67 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 08 www.totallux.nl18 WWW.TOTALLUX.NL
3.5 Swivel Connector LED Flexlines 2018 TLX10 Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Swivel Front Connector 18.5mm 10.5mm (top end) 32mm Connects light to power supply. IP40 40mm DIY connector. Cable length available in 0.3m, 1m. Swivel Front Connector 10.5mm (side right/left) Connects light to power supply. IP40 18.5mm 32mm DIY connector. Cable length available 40mm in 0.3m, 1m.RL Swivel Front Connector 18.5mm 10.5mm (bottom) 32mm Connects light to power supply. IP40 DIY 40mm connector. Cable length available in 0.3m, 1m. Swivel End Cap 10.5mm Termination protection of the light,IP40 DIY connector. 18.5mm 32mm 40mm3.6 Anti-wicking Ferrule Note: Unless otherwise stated, the tolerance is ±0.5mm. Anti-wicking Ferrule Φ12mm The anti-wicking ferrule is located at 30mm 115mm (±5mm tolerance) from the connector on the cable. For protection against water ingress from inside of cable wire and hence damage the light.09 www.totallux.nl WWW.TOTALLUX.NL 19
TLX10 LED Flexlines 20184. Mounting Profile 4.1 Plastic Profile 21mmNote: Unless otherwise stated, the tolerance of the profile is ±0.5mm. 11mm L1 L2 Φ3.5mmModel W*H(mm) Standard Length ( L:mm) L1 (mm) L2 (mm) Screw Hole (Φ:mm) Hole Number For Product 500 50 200 Φ3.5 3 TLX10TLX10-PC/PL 11*21 1000 100 200 Φ3.5 5 TLX10 2000 100 200 Φ3.5 10 TLX104.2 Self-locking Aluminum Profile (Using with the Clip) 22.1mm 14.3mmNote: Unless otherwise stated, the tolerance of the profile is ±0.5mm. L L3 L4 Φ3.5L1 L2Model W*H(mm) Standard Length(L：mm) L1(mm) L2(mm) L3(mm) L4(mm) L Hole Number Clip Number 35 17.5 25 5 / 2 1TLX10-SLA/PL 14.3*22.1 500 50 200 75 350 Hole Screw(Φmm) 3 2 1000 100 200 150 350 Φ3.5 5 3 2000 100 200 125 350 Φ3.5 10 6 Φ3.5 Φ3.5 10 www.totallux.nl20 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX104.3 Self-locking Aluminum Profile Ver 2.0 (Using with the Clip) 22.3mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. 12.8mm L Φ3.5 L1 L2 L4 Φ3.5 L3Model W*H(mm) Standard Length(mm) L1(mm) L2(mm) L3(mm) L4(mm) Hole Screw(mm) Hole Number Clip Number 35 17.5 / 5 25 Φ3.5 2 1TLX10-SLA/PL2 12.8*22.3 500 25 225 50 200 Φ3.5 3 3 1000 25 237.5 100 200 Φ3.5 5 5 2000 25 243.8 100 200 Φ3.5 10 94.4 L Shape Self-locking Aluminum Profile Ver. 2 (Using with the Clip) Φ3.5 22.3mm 100mm Φ3.5Model: TLX10-SLA/PL2-L 12.8mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. 100mm4.5 T Shape Self-locking Aluminum Profile Ver. 2 (Using with the Clip) Φ3.5 68mm 22.3mm Φ3.5 150mmModel: TLX10-SLA/PL2-T 12.8mm Φ3.5Note: Unless other wise stated, the tolerance of the profile is ±0.5mm. WWW.TOTALLUX.NL 21 11 www.totallux.nl
TLX10 LED Flexlines 2018 4.6 X Shape Self-locking Aluminum Profile Ver. 2 (Using with the Clip) Φ3.5 Φ3.522.3mm Φ3.5 150mmModel: TLX10-SLA/PL2-X 12.8mm Φ3.5Note: Unless other wise stated, the tolerance of the profile is ±0.5mm. 150mm4.7 Self-locking Aluminum Profile Ver. 2, Bottom Feed (Using with the Clip) Φ3.5 22.3mm Φ3.5 100mmModel: TLX10-SLA/PL2-B 12.8mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.8 Self-locking Aluminum Profile Ver. 2, Middle Feed (Using with the Clip) Φ3.5 22.3mm 100mm Φ3.5Model: TLX10-SLA/PL2-M 12.8mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. 12 www.totallux.nl22 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX104.9 Self-locking Aluminum Profile Ver. 2, Side Feed From Left(Using with the Clip) Φ3.5 22.3mm Φ3.5 100mm Φ3.5Model: TLX10-SLA/PL2-SL 12.8mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.10 Self-locking Aluminum Profile Ver. 2, Side Feed From Right(Using with the Clip) 22.3mm Φ3.5 100mmModel: TLX10-SLA/PL2-SR 12.8mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.11 Plastic & Aluminum Combination Profile 23mm 7.5mm 14mm L2 L1Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Φ3.5mm For Product 35 17.5 / Φ3.5 TLX10TLX10-PA/PL 14*23 500 50 200 Φ3.5 Hole Number TLX10 1000 100 200 Φ3.5 1 TLX10 2000 100 200 Φ3.5 3 TLX10 5 1013 www.totallux.nl WWW.TOTALLUX.NL 23
TLX15
LED Flexlines 2018 TLX15TLX15 is a member of the TLX LED Flexlines 21mmseries with smooth flat exterior that allows various 11,5mmmonochromatic lighting solutions and producessuperior homogenized illumination along its fulllength and ultimate versatility for your colorfullighting scheme.The TLX LED Flexlines series will be available in SILICONE in 2018.Art: 50.02.0507 TLX15 Flexline IP68 24V 60 LEDs/m 12 W/m 2200K Art: 50.02.0508 TLX15 Flexline IP68 24V 60 LEDs/m 12 W/m 3000K Art: 50.02.0509 TLX15 Flexline IP68 24V 60 LEDs/m 12 W/m 2700KArt: 50.02.0518 TLX15 Flexline IP68 24V 60 LEDs/m 12 W/m 2400K Art: 50.02.0525 TLX15 Flexline IP68 24V 60 LEDs/m 12 W/m RGB* Art: 50.02.0526 TLX15 Flexline IP68 24V 144 LEDs/m 12 W/m W/WW CTA* (2500K-5000K)Art: 50.02.0527 TLX15 Flexline IP68 24V 60 LEDs/m 15 W/m RGBW* (2700K/4000K)* Only available with injected connection cable and endcapAccessoriesArt: 50.16.0434 TLX15 Flexline Aluminium U-profile, 1 meterArt: 50.16.0435 TLX15 Flexline Self lock Aluminium U-profile, 1 meterArt: 50.16.0439 TLX15 Flexline Polycarbonate U-profile, 1 meterArt: 50.16.0442 TLX15 Flexline Polycarbonate U-profile, 2 meterArt: 50.16.0520 TLX15 Flexline IP68 24V Connection cable 30cm type 1 (SNAP)Art: 50.16.0521 TLX15 Flexline IP68 24V Connection cable 30cm type 2 (SNAP) Art: 50.16.0530 TLX15 Flexline IP68 24V Endcap type 1 (SNAP)Art: 50.16.0531 TLX15 Flexline IP68 24V Endcap type 2 (SNAP)On request: customized length + injected connection cable + injected endcap + color temperature (Kelvin). WWW.TOTALLUX.NL 25
TLX15 LED Flexlines 20181. Specifications & Parameters D: 120mm Beam Angle 10%1.1 Dimensions of Light Note: Unless other wise stated, the tolerance of the light is ±0.3mm.1.2 Technical ParametersTechnical Parameters TLX15-24CV TLX15-24CV-R80 TLX15-24CV-R90 TLX15-24CV TLX15-24CV TLX15-24CVArticle No. Red/Amber Green/Blue/White Green/Blue/White W/WW RGBW RGBColor DC24V DC24V DC24V DC24V DC24V DC24VWorking Voltage 7.2W 12W 12W 12W 15W 12WRated Power/m 60 60 60 144LEDs 60 60LED Qty/m 16.67mm 16.67mm 16.67mm 13.89mm 16.67mm 16.67mmLED Distance 10LEDs(1unit) 6LEDs(1unit) 6LEDs(1unit) 12LEDs (1 unit) 6LEDs(1unit) 6LEDs(1unit)Min. Cutting Unit 166.7mm(1unit) 100mm(1unit) 100mm(1unit) 83.3mm(1 unit) 100mm(1unit) 100mm(1unit)Min. Cutting Length 15m 10m 10m 10m 5m 7m/10mContinuous Length 325gWeight/m -20 ~ 60℃Storage Temperature -20 ~ 45℃Environmental Working Temperature 0 ~ 45℃Environmental Installation Temperature IP68IP Rating1.3 Optical ParametersArticle No. TLX15-24CV Lumen/m Color TLX15-24CV-R80 Lumen/m TLX15-24CV-R90 Lumen/mLED Type SMD >110lm 2500K SMD / SMD >240lmBeam angle 160° >220lm 2700K 160° >280lm 160° >240lmColor Wavelength >35lm 3000K CCT >280lm CCT >240lmRed 620-630nm >110lm 3500K / >320lm 2460±120K /Green 520-530nm 4000K 2725±145K >320lm 2725±145K >280lmBlue 465-475nm 4500K 3045±175K >320lm 3045±175K /Amber 585-595nm 5000K 3465±245K >320lm / >280lm 5700K 3985±275K >320lm 3985±275K 6500K 4503±243K >320lm / 5029±283K 5029±283K 5669±355K 6532±510K 044 www.totallux.nl26 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX152. Functions & Features2.1 Product Features1. High quality and high brightness SMD LED chip.2. Protection Circuit: Each LED Protected.3. Variety of monochromatic lights for option including Red, Green, Blue, Amber and Whitelight(2200K to 6500K).4. UV & flame resistant construction(PVC).5. Flat profile, good choice for recessed mounting.6. High color consistency&smooth illumination with invisible light dots.7. Flexible with 120mm minimum bending diameter.8. Easy installation and assembly with DIY accessories for joining and terminating.9. High IP rating(IP68).10.The product IP rate is ultimately in line with properly applied IP rated connectors.11. Continuous length up to 15m (R, A )/ 10m (G, B, W) by powering one end.12. Environmentally friendly & energy efficient.13. Automated production, high reliability & long warranty.14. 5 years life span (Do not continuously operate over 8 hours per day).2.2 Minimum Bend Diameter Light Surface Φ120 mm 01|0201|0021|02 01|02 Do not bend smaller than allowed minimum bend diameter. Light SurfaceThe light can only be bent laterally(opposite bend along to light surface).3. Types of Connector3.1 Injection-moulded Connector Note: Unless other wise stated, the tolerance of the connector is ±0.5mm. Injection-moulded Front 11.5mm 14mm Connector (bottom) 2mm Connects light to power supply with 34.5mm pre-installed bottom feed cable, IP67. 23.5mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 11mm Φ12mm05 www.totallux.nl WWW.TOTALLUX.NL 27
TLX15 LED Flexlines 2018 21.5mm 11.5mm 2mm Injection-moulded Front 11mm Φ12mm Connector (side) 13.5mm 14mm 11mm 5mm Connects light to power supply with 11.5mm pre-installed side feed cable, IP67. Cable length available in 0.3m, 1m, 21.5mm 3m, 5m, 10m, 15m, 20m. Φ12mm 11.5mm Injection-moulded Front 22mm 2mm Connector (top end) 17mm 12mm Connects light to power supply with 21.5mm pre-installed end feed cable, IP67. Cable length available in 0.3m, 1m, 13.5mm 11mm 3m, 5m, 10m, 15m, 20m. 2mm 11.5mm Injection-moulded Middle Feed Connector 21.5mm Connects light to power supply with pre-installed end feed cable, IP67. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Injection-moulded End Cap Pre-installed termination protection of the light, IP67. 06 www.totallux.nl28 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX153.2 Dual Injection-moulded Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Dual Injection-moulded 15.5mm 42mm 2mm Front Connector (bottom) 27mm Connects light to power supply with 47.5mm 20mm 2mm pre-installed bottom feed cable, IP68. 27.5mm 2mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Φ15mm Dual Injection-moulded Φ15mm 2mm Front Connector (side) 22.5mm Connects light to power supply with pre-installed side feed cable, IP68. 2mm 2mm Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 20mm 27mm 17.5mm 42mm Dual Injection-moulded 2mm Front Connector (top end) 15.5mm 22.5mm 20mm 2mm Connects light to power supply with Φ15mm 50mm pre-installed end feed cable, IP68. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Dual Injection-moulded 15.5mm End Cap 2mm Pre-installed termination protection of the light, IP68. 22.5mm 2mm 34mm07 www.totallux.nl WWW.TOTALLUX.NL 29
TLX15 LED Flexlines 2018 Note: Unless other wise stated, the tolerance of the connector is ±0.5mm.3.3 Sleeve Connector Sleeve Front Connector 39mm Connects light to power supply. IP40 22mm 25mm DIY connector. Cable length available 17mm in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Feed connector*1 (Two-pin) PC cover*1 Anti-skidding clips*2 Sleeve End Cap 15mm Termination protection of the light. 17mm 25mm IP40 DIY connector. Shading Sheat*1 25mm PC cover*1 17mm 56mm Sleeve Middle Connector L Combine two pieces of lights together. DIY connector. Pin connector*1 (Two-pin) PC cover*2 Anti-skidding clips*4 Sleeve Jumper Connects two pieces of lights together with a flexible cable. IP40 DIY connector. L available in 0.3m, 1m and 3m. Double-end feed connector*1 (Two-pin) PC cover*2 Anti-skidding clips*4 Sleeve Power T-feed 50mm Connects two pieces of lights together L2 with a T joint, energized from middle. IP40 L1 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) PC cover*2 Anti-skidding clips*4 08 www.totallux.nl30 WWW.TOTALLUX.NL
3.4 Screw Connector LED Flexlines 2018 TLX15 Note: Unless other wise stated, the tolerance of the connector is ±0.5mm. Screw Front Connector 21mm Connects light to power supply. IP67 29.3mm 25mm DIY connector. Cable length available 57mm in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 21mm Feed connector*1 (Two-pin) Silicone gasket*1 8.6mm 25mm Aluminum mounting piece*1 37mm Anti-skidding clip*1 Screw*4 21mm Screw Front Connector 8.6mm 25mm (bottom) 37mm Termination protection of the light. L Ip67. DIY connector. 50mm Feed connector*1 (Two-pin) Silicone gasket*1 L2 Aluminum mounting piece*1 L1 Anti-skidding clip*1 Screw*4 Screw End Cap Termination protection of the light. Ip67. DIY connector. Tail plug*1 Silicone gasket*1 Aluminum mounting piece*1 Anti-skidding clip*1 Screw*4 Screw Jumper Connects two pieces of lights together with a flexible cable. IP67 DIY connector. L available in 0.3m, 1m and 3m. Double-end feed connector*1 (Two-pin) Silicone gasket*2 Aluminum mounting piece*2 Anti-skidding clip*2 Screw*8 Screw Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP67 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) Silicone gasket*2 Aluminum mounting piece*2 Anti-skidding clip*2 Screw*809 www.totallux.nl WWW.TOTALLUX.NL 31
TLX15 LED Flexlines 2018 Note: Unless other wise stated, the tolerance of the connector is ±0.5mm.3.5 Clasp Connector Clasp Front Connector 61mm 24mm 28.5mm 24mm Connects light to power supply. IP67 DIY connector. Cable length available 17.5mm in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 47.5mm 16.4mm Feed connector*1 (Two-pin) Silicone gasket*1 17.5mm U steel plate*1 Anti-skidding clip*1 L Clasp End Cap 50mm Termination protection of the light. L2 IP67 DIY connector. L1 Tail plug*1 24mm Silicone gasket*1 U steel plate*1 17.5mm 63mm Anti-skidding clip*1 Clasp Jumper Connects two pieces of lights together with a flexible cable. IP67 DIY connector. L available in 0.3m, 1m and 3m. Double-end feed connector*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 Clasp Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP67 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 Seamless Middle Connector Connects two pieces of lights together seamlessly. IP40 DIY connector. Silicone gasket*1 Joint PCB*1 U steel plate*2 Anti-skidding clip*2 10 www.totallux.nl32 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX153.6 Snap Connector Note: Unless other wise stated, the tolerance of the connector is ±0.5mm. 01 02 Snap Front Connector(top end) 19.5mm Connects light to power supply. IP67 27.5mm 19.5mm DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 46.5mm 50.5mm Feed connector*1 (Two-pin) Silicone gaskett*1 19.5mm U steel plate*1 Anti-skidding clip*1 27.5mm 28mm PC Cover*1 57mm Snap Front Connector(side) 19.5mm Connects light to power supply. IP67 27.5mm 28mm DIY connector. Cable length available 57mm in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 19.5mm Feed connector*1 (Two-pin) Silicone gaskett*1 27.5mm 19.5mm U steel plate*1 46.5mm Anti-skidding clip*1 PC Cover*1 Snap Front Connector(bottom) Connects light to power supply. IP67 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Feed connector*1 (Two-pin) Silicone gaskett*1 U steel plate*1 Anti-skidding clip*1 PC Cover*1 Snap End Cap Termination protection of the light. IP67. DIY connector. Tail plug*1 Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC Cover*1 Snap Jumper L Connects two pieces of lights together L2 with a flexible cable. IP67 DIY connector. L1 L available in 0.3m, 1m and 3m. 50mm Double-end feed connector*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC Cover*2 Snap Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP67 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC Cover*211 www.totallux.nl WWW.TOTALLUX.NL 33
TLX15 LED Flexlines 2018 Note: Unless other wise stated, the tolerance of the connector is ±0.5mm.3.7 Swivel Connector Swivel Front Connector 13mm (top end) 22mm Connects light to power supply. IP40 DIY connector. Cable length available 32mm in 0.3m, 1m. 40mm Swivel Front Connector 13mm (side) 22mm Connects light to power supply. IP40 DIY connector. Cable length available 32mm in 0.3m, 1m. 40mm Swivel Front Connector 13mm (bottom) 22mm Connects light to power supply. IP40 DIY connector. Cable length available in 32mm 0.3m, 1m. 40mm Swivel End Cap 13mm Termination protection of the light,IP40 22mm DIY connector. 32mm 40mm3.7 Anti-wicking Ferrule Note: Unless otherwise stated, the tolerance is ±0.5mm. Anti-wicking Ferrule Φ12mm The anti-wicking ferrule is located at 30mm 115mm (±5mm tolerance) from the connector on the cable. For protection against water ingress from inside of cable wire and hence damage the light. 12 www.totallux.nl34 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX154. Mounting Profile4.1 Standard Aluminum Profile 22mm 13.8mm L2Note: Unless other wise stated, the tolerance of the profile is ±0.5mm. Φ3.5mm L1Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product 35 17.5 / Φ3.5 1 TLX15TLX15-A/PL 13.8*22 500 50 200 Φ3.5 3 TLX15 1000 100 200 Φ3.5 5 TLX15 2000 100 200 Φ3.5 10 TLX154.2 Plastic ProfileNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. L1 L2 Φ3.5mmModel W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product 500 50 200 Φ3.5 3 TLX15TLX15-PC/PL 14*24 1000 100 200 Φ3.5 5 TLX15 2000 100 200 Φ3.5 10 TLX1513 www.totallux.nl WWW.TOTALLUX.NL 35
TLX15 LED Flexlines 2018 4.3 Self-locking Aluminum Profile (Using with the Clip) 23.7mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. 16.8mm L L3 L4 Φ3.5L1 L2 LModel W*H(mm) Standard Length(mm) L1(mm) L2(mm) L3(mm) L4(mm) Hole Screw(mm) Hole Number Clip Number 35 17.5 25 5 / Φ3.5 2 1TLX15-SLA/PL 16.8*23.7 500 50 200 75 350 Φ3.5 3 2 1000 100 200 150 350 Φ3.5 5 3 2000 100 200 125 350 Φ3.5 10 64.4 Self-locking Aluminum Profile Ver 2.0 (Using with the Clip) 25.6mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. 16.2mmL1 L Φ3.5 L3 L2 Φ3.5 L4Model W*H(mm) Standard Length(mm) L1(mm) L2(mm) L3(mm) L4(mm) Hole Screw(mm) Hole Number Clip Number 35 17.5 / 5 25 Φ3.5 2 1TLX15-SLA/PL2 16.2*25.6 500 25 225 50 200 Φ3.5 3 3 1000 25 237.5 100 200 Φ3.5 5 5 2000 25 243.8 100 200 Φ3.5 10 9 14 www.totallux.nl36 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX154.5 L Shape Self-locking Aluminum Profile Ver. 2 (Using with the Clip) Φ3.5 25.6mm 100mm 16.2mm Φ3.5Model: TLX15-SLA/PL2-L 100mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.6 T Shape Self-locking Aluminum Profile Ver. 2 (Using with the Clip) 25.6mm Φ3.5 150mm 65mm Φ3.5 Φ3.5 16.2mmModel: TLX15-SLA/PL2-TNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.7 X Shape Self-locking Aluminum Profile Ver. 2 (Using with the Clip) Φ3.5 Φ3.525.6mm Φ3.5 150mmModel: TLX15-SLA/PL2-X 16.2mm Φ3.5Note: Unless other wise stated, the tolerance of the profile is ±0.5mm. 150mm15 www.totallux.nl WWW.TOTALLUX.NL 37
TLX15 LED Flexlines 2018 4.8 Self-locking Aluminum Profile Ver. 2, Bottom Feed (Using with the Clip) Φ3.5 25.6mm Φ3.5 100mmModel: TLX15-SLA/PL2-B 16.2mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.9 Self-locking Aluminum Profile Ver. 2, Middle Feed (Using with the Clip) Φ3.5 25.6mm 100mm 16.2mm Φ3.5Model: TLX15-SLA/PL2-M Φ3.5Note: Unless other wise stated, the tolerance of the profile is ±0.5mm. Φ3.54.10 Self-locking Aluminum Profile Ver. 2, Side Feed From Left(Using with the Clip) 25.6mm 100mmModel: TLX15-SLA/PL2-SL 16.2mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm. 16 www.totallux.nl38 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX154.11 Self-locking Aluminum Profile Ver. 2, Side Feed From Right(Using with the Clip) Φ3.5 25.6mm 100mm Φ3.5 16.2mm 100/300/500/900mmModel: TLX15-SLA/PL2-SRNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.12 Curve Stainless Steel Profile 10.7mm 14.29mm 0.4mm 4.76mm 24.5mm 4.76mmModel: TLX15-CS/PL 13.2mmNote: Unless other wise stated, the tolerance of the profile is ±0.5mm.4.13 Plastic & Aluminum Combination Profile 26mm 7.5mm 16mm L2 L1Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Φ3.5mm For Product 35 17.5 / Φ3.5 TLX15TLX15-PA/PL 16*26 500 50 200 Φ3.5 Hole Number TLX15 1000 100 200 Φ3.5 1 TLX15 2000 100 200 Φ3.5 3 TLX15 5 1017 www.totallux.nl WWW.TOTALLUX.NL 39
TLX15 LED Flexlines 201840 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX15 WWW.TOTALLUX.NL 41
TLX17
LED Flexlines 2018 TLX17TLX17 is a member of TLX LED Flexlines series 6mmwith creative patent optical design and meticulouslyselected LEDs that provides aesthetically superior,consistent lighting effects with no fluctuations inluminescence as seen with conventional lighting.The TLX LED Flexlines series will be available in SILICONE in 2018. 13,5mmArt: 50.02.0580 TLX17 Flexline IP68 24V 60 LEDs/m 12 W/m 2700K Art: 50.02.0581 TLX17 Flexline IP68 24V 60 LEDs/m 12 W/m 3000K Art: 50.02.0582 TLX17 Flexline IP68 24V 60 LEDs/m 12 W/m 2400K-2500K MILKYArt: 50.02.0583 TLX17 Flexline IP68 24V 60 LEDs/m 12 W/m 2700K MAT Art: 50.02.0584 TLX17 Flexline IP68 24V 144 LEDs/m 12 W/m 2700K-6500K CTAArt: 50.02.0585 TLX17 Flexline IP68 24V 60 LEDs/m 12 W/m 2700K MILKYAccessoriesArt: 50.16.0446 TLX17 Flexline Aluminium U-profile, 1 meterArt: 50.16.0447 TLX17 Flexline Polycarbonate U-profile, 1 meterArt: 50.16.0448 TLX17 Flexline Polycarbonate U-profile, 2 meterArt: 50.16.0449 TLX17 Flexline IP65 24V Connection cable 30cm type 1, CTA, 2700K-6500KArt: 50.16.0535 TLX17 Flexline IP67 24V Connection cable 30cm type 1 (SNAP)Art: 50.16.0536 TLX17 Flexline IP67 24V Connection cable 30cm type 2 (SNAP) Art: 50.16.0540 TLX17 Flexline IP67 24V Endcap type 1 (SNAP)On request: customized length + injected connection cable + injected endcap + color temperature (Kelvin). WWW.TOTALLUX.NL 43
TLX17 LED Flexlines 20181. Specifications & Parameters 150 D:50mm Beam Bending Angle Diameter1.1 Dimensions of Light 6mm 13.5mm Note: Unless otherwise stated, the tolerance of the light is ±0.3mm.1.2 Technical ParametersTechnical Parameters TLX17-D24CV-60 TLX17-D24CV-60 TLX17 TLX17-TTArticle No. Red/Amber Warm White/White/Green/Blue W/WW TLX17-DDColor DC 24V DC 24V DC24V TLX17-WWWorking Voltage 7.2W 12W 12WRated Power/m 60LEDs 60LEDs 144LEDsLED Qty/m 16.67mm 16.67mm 13.89mmLED Distance 10LEDs(1unit) 6LEDs(1unit) 12LEDs (1unit)Min. Cutting Unit 167.8mm(1unit) 100mm(1unit) 8.33CMMin. Cutting Length 15m 10m 10mContinuous Length 102gWeight/m -20~60℃Storing Temp. -20~45℃Environmental Working Tempeature 0~45℃Environmental Installation Tempeature IP67/IP40IP Rating1.3 Optical Parameters -/+180Article No. TLX17-D24CV-60 -150 150LED Type SMD -120 120Beam angle 150°Color Wavelength -90 0 90Red 620-630nmGreen 520-530nm Lumen/m Color CCT Lumen/m -60 60Blue 465-475nm >220lm 2400K 2400±175K >800lm -30Amber 585-595nm >550lm 2700K 2725±145K >900lm 30 >110lm 3000K 3045±175K >900lm 0 >220lm 3500K 3465±245K >900lm 4000K 3985±275K >900lm 4500K 4503±243K >900lm 5000K 5028±283K >900lm 5700K 5665±355K >900lm 6500K 6530±510K >900lm 044 www.totallux.nl44 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX172. Functions & Features2.1 Product Features1. High quality and high brightness SMD LED chip.2. Variety of monochromatic lights for option including Red, Green, Blue, Amber and Whitelight(2400K to 6500K).3. UV & flame resistant construction(PVC).4. Flat profile, good choice for recessed mounting.5. High color consistency& uniformity.6. Ultra flexible with 50mm minimum bending diameter.7. Easy installation and assembly with DIY accessories for joining and terminating.8. High IP rating(IP67).9.The product IP rate is ultimately in line with properly applied IP rated connectors.10. Continuous length up to 15m (R, A) / 10m (G, B, W) by powering one end.11. Environmentally friendly & energy efficient.12. Automated production, high reliability & long warranty.13. 5 years life span (Do not continuously operate over 8 hours per day).2.2 Minimum Bend Diameter Light Surface Φ50 mm Light SurfaceThe light can only be bent along the light surface. Do not bend smaller than allowed minimum bend diameter.3. Types of Connector3.1 Injection-moulded Connector Note: Unless otherwise stated, the tolerance of the connector is ±0.5mm. Injection-moulded Front 17.5mm Connector 30mm Connects light to power supply with pre-installed front feed cable, IP67.Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 9mm05 www.totallux.nl WWW.TOTALLUX.NL 45
TLX17 LED Flexlines 2018 20mm 17.5mm Injection-moulded 9mm End Cap 19mm Pre-installed termination protection of the light, IP67. 13m m 11mm 50mm3.2 Dual Injection-moulded Connector 70mm Dual Injection-moulded Φ15mm Front Connector 19mm Connects light to power supply with 11mm pre-installed front feed cable, IP65.Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Dual Injection-moulded End Cap Pre-installed termination protection of the light, IP65. 28mm3.3 Sleeve Connector 22mm Sleeve Front Connector 20mm Connects light to power supply. IP40 10.5mm DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. 39mm Feed connector*1(Four-pin) PC cover*1 18mm 10.5mm Anti-skidding clip*1 15mm Heat-shrink tube*1 Sleeve End Cap Termination protection of the light. IP40 DIY connector. Shading sheet*1 PC Cover*1 06 www.totallux.nl46 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX17 Sleeve Middle Connector 57 mm 17.5mm Combine two pieces of lights 11mm together. IP40 DIY connector. Pin connector*1 (Two-pin) L PC cover*2 Anti-skidding clip*2 50 mm L2 L1 Sleeve Jumper 20.5mm 23.5mm Connects two pieces of lights together with a flexible cable. IP40 DIY connector. 14mm L available in 0.3m, 1m and 3m. Double-end feed connector*1(Two-pin) 26.5mm 17mm PC cover*2 49mm Anti-skidding clip*2 56mm Sleeve Power T-feed 23.5mm Connects two pieces of lights 17.7mm together with a T joint, energized from middle. IP40 DIY connector. L1 17mm 14mm and L2 available in 0.3m. T joint*1(Two-pin) 26.5mm 47mm PC cover*2 Anti-skidding clip*23.4 Snap Connector Snap Front Connector Connects light to power supply. IP67 DIY connector. Cable length available in 0.3m, 1m, 3m, 5m, 10m, 15m, 20m. Feed connector*1(Four-pin) Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*1 Snap End Cap Termination protection of the light. IP67 DIY connector. Tail plug*1 Silicone gasket*1 U steel plate*1 Anti-skidding clip*1 PC cover*107 www.totallux.nl WWW.TOTALLUX.NL 47
TLX17 LED Flexlines 2018 Snap Middle Feed Connector 98mm 11mm 24.5mm Interconnect two pieces of lights together with power cable. IP67 DIY connector. 1.5mm Double-end feed connector*1 18mm Silicone gasket*2 13.5mm U steel plate*2 Anti-skidding clip*2 PC cover*2 Snap Middle Connector 98mm 11mm 24.5mm Interconnect two pieces of lights together. IP67 DIY connector. 21.5mm Bidirectional feed connctor*1 18mm Silicone gasket*2 13.5mm U steel plate*2 Anti-skidding clip*2 L PC cover*2 Snap Jumper L2 L1 Connects two pieces of lights together with a flexible cable. IP68 DIY connector. 50mm L available in 0.3m, 1m and 3m. Double-end feed connector*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*2 Snap Power T-feed Connects two pieces of lights together with a T joint, energized from middle. IP68 DIY connector. L1 and L2 available in 0.3m. T joint*1 (Two-pin) Silicone gasket*2 U steel plate*2 Anti-skidding clip*2 PC cover*23.5 Anti-wicking Ferrule Note: Unless otherwise stated, the tolerance is ±0.5mm. Anti-wicking Ferrule Φ12mm The anti-wicking ferrule is located at 30mm 115mm (±5mm tolerance) from the connector on the cable. For protection against water ingress from inside of cable wire and hence damage the light. 08 www.totallux.nl48 WWW.TOTALLUX.NL
LED Flexlines 2018 TLX174. Mounting Profile4.1 Standard Aluminum Profile 9.5mm 15.5mm L2Note: Unless otherwise stated, the tolerance of the profile is ±0.5mm. Φ3.5mm L1Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product 35 17.5 / Φ3.5 1 TLX17TLX17-A/PL 15.5*9.5 500 50 200 Φ3.5 3 TLX17 1000 100 200 Φ3.5 5 TLX17 2000 100 200 Φ3.5 10 TLX174.2 Plastic & Aluminum Combination Profile 11.2mm 17mm L1 L2Note: Unless other wise stated, the tolerance of the profile is ±0.5mm. Φ3.5mmModel W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product 35 17.5 / Φ3.5 1 TLX17TLX17-P+A/PL 11.2*17 500 50 200 Φ3.5 3 TLX17 1000 100 200 Φ3.5 5 TLX17 2000 100 200 Φ3.5 10 TLX1709 www.totallux.nl WWW.TOTALLUX.NL 49
TLX17 LED Flexlines 2018 4.3 Plastic Profile 8.8mm 15mm L1 L2 Φ3.5mmNote: Unless otherwise stated, the tolerance of the profile is ±0.5mm.Model W*H(mm) Standard Length (mm) L1 (mm) L2 (mm) Screw Hole (mm) Hole Number For Product 500 50 200 Φ3.5 3 TLX17TLX17-PC/PL 15*8.8 1000 100 200 Φ3.5 5 TLX17 2000 100 200 Φ3.5 10 TLX174.4 Plastic Clip 33.6 mm 8.0 mm 10 mmΦ4.5mm 5. 7 mm 8.0 mmNote: Unless otherwise stated, the tolerance of the clip is ±0.5mm.5.PackagingPackaging Method Plastic Plate White Box CartonPackaging Detail Numbers of White Box 5Light Length White Box Dimension (cm) Carton Dimension (cm) 5 Carton Weight (kg)10m 35*4.2*46 48*37*24 2 720m 45*4.2*56 58*47*24 1230m 61.5*4.2*72 74*63.5*10.5 8 10 www.totallux.nl50 WWW.TOTALLUX.NL
Search
