LED FlexliLnEesD2F0le1x9linesT2L0X1922 WTLiXn2g2Swivel Connector & Endcap (IP20) (For technical specifications, see page 73)Swivel Front Connector - Swivel End CapTop End Termination protection of the light.Connects light to power supply. IP20 IP20 DIY connector.DIY connector. Cable available in30cm and 1m lengths.Injection Moulded Connector & Endcap (IP67) (For technical specifications, see page 81)Injection Moulded Front Injection Moulded FrontConnector - Top End Connector - BottomConnects light to power supply with Connects light to power supply withpre-Installed cable, IP67. Cable pre-Installed cable, IP67. Cableavailable in 30cm, 1m, 3m, 5m, 10m, available in 30cm, 1m, 3m, 5m, 10m,15m and 20m lengths. 15m and 20m lengths.Injection Moulded Front Injection Moulded EndConnector - Side CapConnects light to power supply with Pre-Installed termination protection ofpre-Installed cable, IP67. Cable the light, IP67.available in 30cm, 1m, 3m, 5m, 10m,15m and 20m lengths.Injection Moulded Middle Injection Moulded JumperFeed Connector Connects two pieces of light togetherConnects light to power supply with with a flexible cable. IP67 Pre-pre-Installed cable, IP67. Cable installed connector. Middle cableavailable in 30cm, 1m, 3m, 5m, 10m, available in 30cm ~ 1m lengths.15m and 20m lengths.Injection Moulded Power Note:T-feed Maximum 8 jumpers in 20m Maximum 4 jumpers in 10mConnects two pieces of light together Maximum 8 T-feeds in 20mwith a T-joint, energized from middle. Maximum 4 T-feeds in 10mIP67 Pre-installed connector. Sidecables available in 15cm ~ 50cmlengths. Bottom cable available in30cm ~ 3m lengths. WWWWWW.T.OTOTATALLULUX.XN.NLL 5511
TLX22 Wing LED Flexlines 2019 21mmMounting ProfilesPlastic Mounting Profile (For more technical specifications, see page 87) Available Colors: PC: Transparent White Available Lengths: 50cm, 1m, 2m. 19mmAluminium Mounting Profile (For more technical specifications, see page 87) 18mm Available Colors: 19mm Aluminium: Silver Available Lengths: 35mm, 50cm, 1m, 2m.Hybrid Mounting Profile (Plastic & Aluminium) (For more technical specifications, see page 88) Available Colors: 23mm PC: Transparent 20.8mm Milky White Aluminium: Black Silver Available Lengths: 35mm, 50cm, 1m, 2m.52 WWW.TOTALLUX.NL
LED Flexlines 2019 TLX22 WingAluminium Self-Lock Mounting Profile with Clip (For more technical specifications, see page 89) 22.3mm Available Colors: Aluminium: Silver Available Lengths: 20.7mm 35cm, 50cm, 1m, 2m.L-Shape Outward L-Shape Inward L-Shape T-ShapeX-Shape Middle Feed Bottom Feed Side Feed Right/LeftAluminium Curve Mounting Profile (For more technical specifications, see page 88) Available Colors: 20mm 14.9mm Aluminium: 0.4mm Silver Available Lengths: 10cm, 30cm, 50cm, 90cm. 17.5mm WWW.TOTALLUX.NL 53
TLX22 Flame Resistant UV Resistant3-Sides Emitting Solvents Resistant Saltwater Resistant IK08 Protection 17mm 300 mm Beam Angle 16mm 320° 10% (IES)Light Surface Working Temperature: PVC (Standard) -20°C ~ +45°C Silicone (On request) -40°C ~ +55°CPossible Connectors & Endcaps IP20 IP67 IP67 IP68 Injection Moulded Dual Injection Moulded Swivel SnapPage 72 Page 69 Page 78 Page 82Possible Mounting Profiles Plastic HybridPage 91 Page 92
LED Flexlines 2019 TLX22 3-SidesIP value of flexline depends on chosen connector:Snap Connector & Endcap (Field Assembly) IP67Swivel Connector & Endcap (Field Assembly) IP20Custom made on request: Injection Moulded Connector & Endcap (Factory Fitted) IP67Dual Injected Moulded Connector & Endcap (Factory Fitted) IP68On request, TLX22 3S is available in Silicone.TLX22 3S can also be customized to your specifications with custom length, CRI and Color Temperature. WWW.TOTALLUX.NL 55
TLX22 3-Sides LED Flexlines 2019Technical ParametersArticle No.: TLX22-3S TLX22-3S Single ColorType: Single Color Green/Blue/ WhiteColor: Red/Amber DC24V CC 12WWorking Voltage: DC24V CC 108 9,26mmRated Power/m: 8W 6 LEDs 55,6mmLed Qty/m: 108 10mLED Distance: 9,26mmMinimum Cutting Unit: 9 LEDs (1 unit)Minimun Cutting Length: 83,3mm (1 unit)Continuous Length: 15mWeight/m: 325gStoring Temperature: -20°C ~ 60°CEnvironmental Working Temp.: -20°C ~ 45°C (PVC)Environmental Installation Temp.: 0°C ~ 45°CIP Rating: Depends on connectorOptical ParametersPhotometric DataArticle No. TLX22-3S TLX22-3S Single ColorType Single Color SMD 160°LED Type SMD CCT 2460±120KBeam Angle 160° 2725±145K 3045±175KColor Wavelength Lumen/m Color 3465±245K Lumen/m >260lm 2500K 3985±275K >750lmRed 620-630nm >800lm 2700K 4503±243K >750lm >92lm 3000K 5029±283K >800lmGreen 520-530nm >260lm 3500K 5669±355K >800lm 4000K 5632±510K >800lmBlue 465-475nm 4500K >800lm 5000K >800lmAmber 585-595nm 5700K >800lm 6500K >800lmProduct Features• High quality and high brightness SMD LED chip, each LED circuit protected.• 180° lightin angle, three-dimensional exquisite frosted effects.• UV & flame resistant construction (PVC).• Extremely flat profile for slimme projects.• Perfect uniform & even light source with invisible light dots.• High illumination up to 800lm/m.• Easy installation and assembly with DIY accessories for joining and terminating.• Continuous length up to 10m/15m by powering one end.• Environmentally friendly & energy efficient.• Automated production, high reliability & long warranty.56 WWW.TOTALLUX.NL
LED FlexlinesLE2D01F9lexlinTeLsX220129 3-STLidXe2s2Connectors & EndcapsSwivel Connector & Endcap (IP20) (For technical specifications, see page 73)Swivel Front Connector - Swivel End CapTop End Termination protection of the light.Connects light to power supply. IP20 IP20 DIY connector.DIY connector. Cable available in30cm and 1m lengths.Snap Connector & Endcap (IP67) (For technical specifications, see page 71)Snap Front Connector - Snap End CapBottom Termination protection of the light.Connects light to power supply. IP67 IP67 DIY connector.DIY connector. Cable available in30cm, 1m, 3m, 5m, 10m, 15m and20m lengths. WWWWWW.T.TOOTTAALLLLUUXX.N.NLL 5577
TLX22 3-Sides LED Flexlines 2019Injection Moulded Connector & Endcap (IP67) (For technical specifications, see page 81) Injection Moulded Front Injection Moulded Front Connector - Top End Connector - Bottom Connects light to power supply with Connects light to power supply with pre-Installed cable, IP67. Cable pre-Installed cable, IP67. Cable available in 30cm, 1m, 3m, 5m, 10m, available in 30cm, 1m, 3m, 5m, 10m, 15m and 20m lengths. 15m and 20m lengths. Injection Moulded Front Injection Moulded End Connector - Side Cap Connects light to power supply with Pre-Installed termination protection of pre-Installed cable, IP67. Cable the light, IP67. available in 30cm, 1m, 3m, 5m, 10m, 15m and 20m lengths. Injection Moulded Jumper Injection Moulded Power T-feed Connects two pieces of light together with a flexible cable. IP67 Pre- Connects two pieces of light together installed connector. Middle cable with a T-joint, energized from middle. available in 30cm ~ 1m lengths. IP67 Pre-installed connector. Side cables available in 15cm ~ 50cm Note: lengths. Bottom cable available in Maximum 8 jumpers in 20m 30cm ~ 3m lengths. Maximum 4 jumpers in 10m Note: Maximum 8 T-feeds in 20m Maximum 4 T-feeds in 10mDual Injection Moulded Connector & Endcap (IP68) (For technical specifications, see page 84) Dual Injection Moulded Dual Injection Moulded Front Connector - Top End Front Connector - Bottom Connects light to power supply with Connects light to power supply with pre-Installed cable, IP68. Cable pre-Installed cable, IP68. Cable available in 30cm, 1m, 3m, 5m, 10m, available in 30cm, 1m, 3m, 5m, 10m, 15m and 20m lengths. 15m and 20m lengths. Dual Injection Moulded Dual Injection Moulded Front Connector - Side End Cap Connects light to power supply with Pre-Installed termination protection of pre-Installed cable, IP68. Cable the light, IP68. available in 30cm, 1m, 3m, 5m, 10m, 15m and 20m lengths.Male & Female Connector (IP68) 50mm Male & Female Connector 21mm For plug and play cable junction, DIY or Pre-installed connector, IP68 Note: Unless otherwise stated, the tolerance is ±2mm.58 WWW.TOTALLUX.NL
Anti-Wicking Ferrule LED Flexlines 2019 TLX22 3-Sides Anti-Wicking Ferrule 12mm 30mm The anti-wicking ferrule is located at 115mm (±5mm tolerance) from the Note: Unless otherwise stated, the tolerance is ±0,5mm. connector on the cable. For protection against water ingress from inside of cable wire and hence damage the light.Mounting Profiles 21mmPlastic Mounting Profile (For more technical specifications, see page 87) Available Colors: PC: Transparent Available Lengths: 50cm, 1m, 2m. 19mmHybrid Mounting Profile (Plastic & Aluminium) (For more technical specifications, see page 88) Available Colors: 23mm PC: Transparent Aluminium: Black Silver Available Lengths: 20.8mm 35mm, 50cm, 1m, 2m. WWW.TOTALLUX.NL 59
TLX303-Sides Emitting
LED Flexlines 2019 TLX3010mm 10mmArt: IP Voltage LEDs/m W/m CT Type50.02.1100 Flexline TLX30 IP68 24V 140 10 2700K 3-sides Emitting 50.02.1101 Flexline TLX30 IP68 24V 140 10 3000K 3-sides Emitting50.02.1102 Flexline TLX30 IP68 24V 140 10 4000K 3-sides Emitting50.02.1103 Flexline TLX30 IP68 24V 140 10 6500K 3-sides Emitting50.02.1110 Flexline TLX30 IP68 24V 72 10 RGB 3-sides Emitting50.02.1120 Flexline TLX30 IP68 24V 224 2x8 CTA (2700-6500K) 3-sides EmittingOn request: customized length. WWW.TOTALLUX.NL 61
TLX30 LED Flexlines 2019Features• LED light strip with PU glue protection, with excellent weather resistance and UV resistance properties. It can ensure no yellowing in outdoor sunlight within 3 years.• High temperature resistance, Waterproof IP68. impact resistance, good heat dissipation, so as to enhance the LED linear quality and service life.• High transmittance, smooth surface, nice touch and vision effect.• Perfect softness, gentle emitting, not dazzling.Glue Comparison Epoxy Glue Silicone PU GlueProduct properties Condensates for a long time, Condensates permanent Condensates permanent Will not harden Will not harden Will harden no yellowing within 5 years no yellowing within 5 years in the open air in the open airWeather resistance Yellowing within 1 month in the open air The chalking phenomenon appears in 1-2 years Performance stable in Performance stable inCold and hot resistance 0 - 60°C, harding in low tem- -40 ~ 220°C -40 ~ 80°C IP65 IP68 perature, easy to break. High High ≤ 5% ≤ 2%Waterproofness IP65 1,5 times 2,3 times 94.6% 97.7%Thermall conductivity Low 1.42 1.40Hygroscopicity ≤ 5% Elongation at break 1,3 times Light transmission rate 82.1% Index of refraction 1.38 MeasurementsTLX30 Single Color Part No. L1 (PCB L1 (Linear L1 (Linear Length Length Length ± 3mm) ± 5mm) ± 5mm) G3-M1 1004 1021 1028 G3-M2 2004 2021 2028 G3-M3 3004 3021 3028 G3-M4 4004 4021 4028 G3-M5 5004 5021 5028 L1 = 50 * N+4 L2 = l1 + 17 L3 = L1 + 2462 WWW.TOTALLUX.NL
TLX30 RGB LED Flexlines 2019 TLX30 Part No. L1 (PCB L1 (Linear L1 (Linear Length Length Length ± 3mm) ± 5mm) ± 5mm) G3-M1 1004 1025 1040 G3-M2 2004 2025 2040 G3-M3 3004 3025 3040 G3-M4 4004 4025 4040 G3-M5 5004 5025 5040TLX30 Dynamic White (CTA) Part No. L1 (PCB L1 (Linear L1 (Linear Length Length Length ± 3mm) ± 5mm) ± 5mm) G3-M1 1004 1025 1035 G3-M2 2004 2030 2040 G3-M3 3004 3035 3045 G3-M4 4004 4040 4050 G3-M5 5004 5045 5055SpecificationsProduct Model TLX30 Single Color TLX30 Dynamic White TLX30 RGBLED type SMD3014 SMD3014 SMD5050LED color LED qty WW, NW, CW, R, G, B, (Y) WW + NW Red + Green + BluePCB Color Input Voltage 140 LEDs/m 244LEDs/m 72LEDs/mGross Weight White White White DC24V DC24V DC24V 750g/roll 750g/roll 750g/rollCharacteristic ParametersProduct Model TLX30 Single Color TLX30 Dynamic White TLX30 RGBProduct Length 1-5meters/roll 1-5meters/roll 1-5meters/roll Constant Voltage Constant VoltageDrive model Constant Voltage WW: 0-0.33A 0.416A CW: 0-0.33AMax Current 0.416A WWW.TOTALLUX.NL 63
TLX30 LED Flexlines 2019Product Model TLX30 Single Color TLX30 Dynamic White TLX30 RGBMax Lumen 2700K-690lm/m WW: 500lm/m - 3000K-690lm/m CW:520lm/m Beam angle 4000K-700lm/mLED spacing Linear width 6000K-720lm/m 180° 180°Linear height 180° PCB width Avarage life 7,14mm 8,93mm 13,88mmColor temperature 10mm 10mm 10mm 10mm 10mm 10mm 8mm 8mm 8mm CRI Over 30.000 hours Over 30.000 hours Over 30.000 hoursColor Maintenance WW: 2600K-3200K 2700-6500K R: 620-625nm NW: 3800K-4500K G: 520-525nm Structure CW: 5500K-7000K B: 460-465nmAmbient temperature IP Rated R: 620-625nm Y: 590-595nm G: 520-525nm B: 460-465nm Y: 590-595nm 80+ RA 80+ RA - Minimum lumen maintenance Minimum lumen maintenance Minimum lumen maintenance test period (600 hours) the test period (600 hours) the test period (600 hours) the chromaticy change on the chromaticy change on the chromaticy change on the chromaticity diagram CIE1976 chromaticity diagram CIE1976 chromaticity diagram CIE1976 (u', v') is within 0,007 (u', v') is within 0,007 (u', v') is within 0,007 LED strip + PU glue protection LED strip + PU glue protection LED strip + PU glue protection -30 ~ +50°C -30 ~ +50°C -30 ~ +50°C IP68 IP68 IP68Connection MethodTLX30 Single ColorTLX30 RGB64 WWW.TOTALLUX.NL
TLX30 Dynamic White (CTA) LED Flexlines 2019 TLX30Clip installation The dynamic white LED flex linear must be connected to the controller, and DO NOT directly connect to the power supply. It is apply to the WIFI, 2.4G, DMX512, PWM, DALI and other dynamic controllers. According to the function of the controller, it cna be independent dimming and CCT adjustable fron 2700k to 6500K, realizing gradual changing and swift changing.PrecautionsWhen installing the product can not be bent less than 120 degrees. Bending diameter must not be less than 10cm. WWW.TOTALLUX.NL 65
TLX-Customized
LED Flexlines 2019 TLX CustomizedCustomized FlexlinesIP: Up to IP68Voltage: CustomLEDs/m: CustomW/m: CustomColor Temperature: CustomCutting Length: CustomEncapsulation Color: CustomFiller Top Transparency: CustomFeatures:Shadowless endcaps & connectorsHomogeneous light surfacesExcellent heat dissipationFlexibleFlame resistantRobustWe can encapsulate the LED strip of your choice with a water protection value of up to IP68. This givesyou endless possibilities. Choose a strip with a cutting length of only 1 LED and it will be able to fit the mostchallenging of places. Must it match a profile of your choice? No problem!Available in both custom lengths and on roll. WWW.TOTALLUX.NL 67
Connectors& Endcaps
LED Flexlines 2019 Connectors & EndcapsSnap Connector & Endcap (IP67)Assembly Type:Field-assembled ConnectorFeatures:- Fully Mechanical Sealed Outdoor Connector- No Screw or Extra Tool Required for Installation- Side, Top End and Bottom Feed AvailableDisadvantages:- Bulky with Extra PC Cover- Relatively High Cost- Can Not Put Inside Mounting Profile- Water Ingress Risk if Assembly Instructions are not Strictly Followed IP Side Bottom Top End End Cap Middle Jumper T-feedTLX8 VB ● ● TLX8 HB ● ● TLX10 IP67 ● ● ● ● ● ● ● TLX15 VB/Wave IP67 ● ● ● ● ● ●TLX15 HB/Curve IP67 ● ● ● ● ● ●TLX16 IP67 ● ● ● ● ● ●TLX22 VB/Wave IP67 ● ● ● ● ●TLX22 HB/Curve IP67 ● ● ● ● ●TLX22 High Lumen IP67 ● ● ● ● ●TLX22 WingTLX22 3 Sides IP67 ● ● ● ● ● WWW.TOTALLUX.NL 69
Connectors & Endcaps LED Flexlines 2019Components (Snap)Front Connector: 1x Silicone gasket, 1x U steel plate, 1x Anti-skidding clip, 1x PC cover, 1x Feed connector (two pin)End Cap: 1x Silicone gasket, 1x U steel plate, 1x Anti-skidding clip, 1x PC cover, 1x Tail plugMiddle Connector: 2x Silicone gasket, 2x U steel plate, 2x Anti-skidding clip, 2x PC cover, 1x Bidirectional feed connectorJumper: 2x Silicone gasket, 2x U steel plate, 2x Anti-skidding clip, 2x PC cover, 1x Double-end feed connector (two pin)T-Feed: 2x Silicone gasket, 2x U steel plate, 2x Anti-skidding clip, 2x PC cover, 1x T-joint (two pin)TLX10 (Snap) 17.5mm 19.6mm 17.5mm 24.5mm 28mm 58.5mm 24.5mm Front Connector (Bottom) 24.5mm 28mm 17.5mm 52.5mm 58.5mm Front Connector (Top End)Front Connector (Side) L2 19.6mm L1 24.5mm L 50mm17.5mm 50mmEnd Cap Jumper T-feedTLX15 (Snap) 1 .5mm 27.5mm 1 .5mm 27.5mm 28mm 27.5mm 28mm 46.5mm 57mm 57mm 50.5mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 5mm L2 L127.5mm 1 .5mm 46.5mm L 50mmEnd Cap Jumper T-feed70 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsTLX16 (Snap) 57mm 20.5mm 23.5mm 13mm 57mm 13mm 14mm 26.5mm 26.5mm 17mm26.5mm 49mm 17mm 17mm 56mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 23.5mm 17.7mm 98mm 26.5mm 11mm L17mm 14mm 23.5mm 26.5mm 47mm 18mm 13.5mmEnd Cap Jumper Middle Connector L2 L1 50mmT-feed24.5mmTLX22 (Snap) 24.5mm 62mm 20.7mm 30mm 62mm 30mm 24.5mm 25mm 25mm 25mm 52mm 54.5mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 20.7mm L224.5mm L1 52mm L 50mm 25mmEnd Cap Jumper T-feedNote: For TLX22-Wing, the Snap Connectors & Endcap are not valid. WWW.TOTALLUX.NL 71
Connectors & Endcaps LED Flexlines 2019Swivel Connector & Endcap (IP20)Assembly Type:Field-assembled ConnectorFeatures:- Quick and Easy Assembly Indoor Connector- Slim and Sleek Appearance, Small Wire for Seamless ConnectionDisadvantages:- Small Cable with Lower Loading Capacity- Can not Fit into the Mounting Profile- Indoor Use Only IP Side Bottom Top End End CapTLX8 VB IP20 ● ● ● ● ● ● ● ●TLX8 HB IP20 ● ● ● ●TLX10 IP20 ● ●TLX15 VB/Wave IP20 TLX15 HB/Curve IP20 TLX16 TLX22 VB/Wave IP20 ● ● ● ●TLX22 HB/Curve IP20 ● ● ● ●TLX22 High Lumen IP20 ● ●TLX22 Wing IP20 TLX22 3-Sides IP20 72 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsTLX8 (Swivel)13mm 6mm 13mm 6mm 13mm 6mm 10.5mm 10.5mm 10.7mm 30mm 30mm 30mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End)13mm 6mm 10.5mm 30mmEnd CapTLX10 (Swivel) 10.5mm 10.5mm 18.5mm 18.5mm 32mm 32mm 40mm 40mmFront Connector (Top End) End CapTLX15 (Swivel) 13mm 13mm 22mm 22mm 32mm 32mm 40mm 40mmFront Connector (Top End) End CapTLX22 (Swivel) 17.5mm 17.5mm17.5mm 17.5mm 40mm 40mmFront Connector (Top End) End Cap WWW.TOTALLUX.NL 73
Connectors & Endcaps LED Flexlines 2019Sleeve Connector & Endcap (IP40)Assembly Type:Field-assembled ConnectorFeatures:- Easy and Quick to Assemble- Splice Connector AvailableDisadvantages:- Indoor Use Only- Can Not Put Inside Mounting Profile IP Top End End Cap Middle Jumper T-feedTLX8 VB ● ● ● ● ● ● ● ●TLX8 HB ● ● ● ●TLX10 TLX15 VB/Wave IP40 ● ● TLX15 HB/Curve IP40 ● TLX16 IP40 TLX22 VB/Wave TLX22 HB/Curve TLX22 High Lumen TLX22 WingTLX22 3-Sides74 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsComponents (Sleeve)Front Connector: 2x Anti-skidding clip, 1x PC cover, 1x Feed connector (two pin)Middle Connector: 4x Anti-skidding clip, 2x PC cover, 1x Feed connector (two pin)Jumper: 4x Anti-skidding clip, 2x PC cover, 1x Double-end Feed connector (two pin)T-Feed: 4x Anti-skidding clip, 2x PC cover, 1x T Joint (two pin)End Cap: 1x PC cover, 1x Shading SheatAdditional components for TLX16:Front Connector: + 1x Heat-shrink tubeMiddle Connector: + 1x Heat-shrink tubeJumper: + 2x Heat-shrink tubeT-Feed: + 2x Heat-shrink tubeTLX15 (Sleeve) 15mm 22mm 25mm 17mm 25mm 25mm 56mm 17mm 17mmFront Connector (Top End) End Cap Middle Connector 50mm L L2 L1Jumper T-feedTLX16 (Sleeve) 22mm 20mm 57mm 19.5mm20mm 10.5mm 10.5mm 11mm L2 39mm 15mmFront Connector (Top End) End Cap Middle Connector 50mm LJumper L1 T-feed WWW.TOTALLUX.NL 75
Connectors & Endcaps LED Flexlines 2019Screw Connector & Endcap (IP67)Assembly Type:Field-assembled ConnectorFeatures:- Fully Mechanical Sealed Outdoor Connector- Both Top End and Bottom Feed AvailableDisadvantages:- Bulky and Heavy- Time Consuming for Assembly, Extra Screw Driver Required- Can Not Put Inside Mounting Profile- Water Ingress Risk if Assembly Instructions are not Strictly FollowedIP Bottom Top End End Cap Jumper T-feedTLX8 VB ● ● ● ● ●TLX8 HB ● ● ● ● ●TLX10 TLX15 VB/Wave IP67 TLX15 HB/Curve IP67 TLX16TLX22 VB/Wave TLX22 HB/Curve TLX22 High Lumen TLX22 WingTLX22 3-Sides76 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsComponents (Screw)Front Connector: 1x Silicone gasket, 1x Aluminium mounting piece, 1x Anti-skidding clip, 4x Screw, 1x Feed connector (two pin)End Cap: 1x Silicone gasket, 1x Aluminium mounting piece, 1x Anti-skidding clip, 4x Screw, 1x Tail plugJumper: 2x Silicone gasket, 2x Aluminium mounting piece, 2x Anti-skidding clip, 8x Screw, 1x Double-end feed connectorT-Feed: 2x Silicone gasket, 2x Aluminium mounting piece, 2x Anti-skidding clip, 8x Screw, 1x T-jointTLX15 (Screw) 21mm 21mm 14.5mm 25mm 8.6mm 25mm 26.5mm 37mm 57mm 21.5mm End Cap Top EndFront Connector (Bottom) 50mm L L2Jumper L1 T-feed WWW.TOTALLUX.NL 77
Connectors & Endcaps LED Flexlines 2019Injection-Moulded Connector & Endcap(IP40/IP65/IP67)Assembly Type:Factory Fitted ConnectorFeatures:- Neat and Clean Appearance, Can Achieve Seamless Connection- Preassembled at Factory, Ease the Pain of Connector Assembly- Can not Modified by Installer- Side, Top End and Bottom Feed Available- Can Put Inside the Mounting ProfileDisadvantages:- Length Needs to be Specified Prior to Ordering- Can not Cut or Assemble in the Field IP Side Bottom Top End End Cap Middle-feed Jumper T-feedTLX8 VB IP40 ● ● ● ● ● ● ● ● ● ● ● ●TLX8 HB IP40 ● ● ● ● ● ● ● ● ● ● ● ● ● ●TLX10 IP67 ● ● ● ● ● ● ● ● ● ● ●TLX15 VB/Wave IP67 ● ● ● ● ● ● ● ● ● ● ● ● ● ●TLX15 HB/Curve IP67 ● ● ● ● ● ● ● ● ●TLX16 IP65 ● ● ● ● ● ● ●TLX22 VB/Wave IP67 TLX22 HB/Curve IP67 TLX22 High Lumen IP67 TLX22 Wing IP67 TLX22 3-Sides IP67 78 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsTLX8 (Injection Moulded) 10mm 16mm 2mm 12mm 8mm 3mm 10mm 12mm 2mm 2mm 12mm 12mm 8mm 2mm Φ12mm8mm 12mm Front Connector (Bottom) 16mm 16mmFront Connector (Side) Front Connector (Top End) 2mm 10mm 16mm 2mm 12mm 12mmEnd CapTLX10 (Injection Moulded) 9mm 14mm 2mm 2mm 9mm 11mm 5mm18mm 31mm 18mm 20mm 11mm 11mm 11mm 12mm 12mm Φ12mm 14mm Front Connector (Bottom) Front Connector (Top End)Front Connector (Side) 2mm 2mm L 12mm 18mm 11mm 16mm 18mm 11mm 22mmEnd Cap Middle Feed Jumper L1 50mm L2T-feed WWW.TOTALLUX.NL 79
Connectors & Endcaps LED Flexlines 2019TLX15 (Injection Moulded) 11.5mm 2mm 11.5mm 14mm 2mm 11.5mm 11mm 5mm21.5mm 34.5mm 21.5mm 23.5mm 11mm 13.5mm 11mm Φ12mm Φ12mm Φ12mm 14mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 11.5mm 11.5mm 2mm 2mm 21.5mm 12mm L 17mm 21.5mm 11mm 22mm 13.5mmEnd Cap Middle Feed Jumper L1 50mm L2T-feedTLX16 (Injection Moulded) 19.5mm 20mm 19.5mm 30mm 20mm 7mm 20mm 9mm 7mm19.5mm Φ9mm 10mm 9mm JumperFront Connector (Top End) End CapT-feedT-feed80 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsTLX22 (Injection Moulded) 16mm 16mm 14mm 16mm Φ12mm 5mm 2mmΦ12mm 2mm 19mm 30mm 17mm 19mm 11mm 11mm 14mm 12mm 11mm 18mm Front Connector (Bottom) Front Connector (Top End)Front Connector (Side) L 2mm 16mm 16mm 2mm 12mm Jumper 17mm 17mm 1.5mm 17mm 22mm 11mm Middle Feed 18mmEnd Cap 50mm L2 L1T-feed Note: For TLX22-Wing, only the Front Connector (Bottom) and the Endcap are valid. WWW.TOTALLUX.NL 81
Connectors & Endcaps LED Flexlines 2019Dual Injection-Moulded Connector & Endcap(IP65/IP68)Assembly Type:Field-assembled ConnectorFeatures:- Enhanced IP68 Rated Injection-Moulded Connector, Specially for Submersible Projects- Preassembled at Factory, Ease the Pain of Connector Assembly- Can not Modified by Installer- Side, Top End and Bottom Feed AvailableDisadvantages:- Length Needs to be Specified Prior to Ordering- Can not Cut or Assemble in the Field- Bulky Connector, Can not Put Inside the Mounting Profile IP Side Bottom Top End End Cap ● TLX8 VB IP65 ● ● ● ● ● ● ● ●TLX8 HB IP65 ● ● ● ● ● ● ● ●TLX10 IP68 ● ● ● ● TLX15 VB/Wave IP68 ● ● TLX15 HB/Curve IP68 ● TLX16TLX22 VB/Wave IP68 ● ● ● ● ● ●TLX22 HB/Curve IP68 ● ● ●TLX22 High Lumen IP68 TLX22 WingTLX22 3-Sides IP68 ● ● ●82 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & EndcapsTLX8 (Dual Injection Moulded) 14mm 22mm 4mm 22mm 15mm 22mm12mm 15mm 4mm 5mm 16mm 15mm 16mm 12mm 14mm10mm 16mm 16mm 14mm 10mm 14mm 10mm 12mm 14mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 22mm 4mm 16mm 16mm 10mm 14mm 14mmEnd CapTLX10 (Dual Injection Moulded)22mm 4mm 15mm 42mm 2mm 10mm 2mm 2mm Φ15mm 27mm 2mm 4mm 2mm 2mm 44mm 20mm 2mm 22mm 2mm 24mm 2mm Φ15mm 27mm 15mm 20mm 20mm 42mm 42mm15mm 20mm Φ15mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 13mm 2mm 4mm 22mm 2mm 27mmEnd CapTLX15 (Dual Injection Moulded)25.5mm 15.5mm 42mm 2mm 10mm 2mm Φ15mm 27mm 4mm 4mm 2mm 25.5mm Φ15mm 2mm 2mm 47.5mm 20mm 2mm 2mm 27.5mm 2mm 20mm 27mm 15.5mm 20mm17.5mm 42mm 50mm Φ15mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 15.5mm 2mm 4mm 22.5mm 2mm 34mmEnd Cap WWW.TOTALLUX.NL 83
Connectors & Endcaps LED Flexlines 2019TLX22 (Dual Injection Moulded) 20mm 42mm 2mm 27mm23mm 4mm Φ15mm 4mm 10mm 2mm 2mm 43mm 23mm 2mm 2mm 20mm 2mm 21mm 2mm 2mm Φ15mm 27mm Φ15mm 20mm 20mm 50mm 42mm22mm 20mmFront Connector (Side) Front Connector (Bottom) Front Connector (Top End) 4mm 20mm 2mm 21mm 2mm 30mmEnd Cap84 WWW.TOTALLUX.NL
LED Flexlines 2019 Connectors & Endcaps WWW.TOTALLUX.NL 85
MountingProfiles
LED Flexlines 2019 Mounting ProfilesPlastic Mounting Profile TLX10 TLX15 TLX16 TLX2221mm 8.8mm 21mm 17mm 19mm 11mm L2L1 Φ3.5mmLength (mm) L1 (mm) L2 (mm) Scew Hole (Ømm) Hole Number500 50 200 Ø3,5 31000 100 200 Ø3,5 52000 100 200 Ø3,5 10Colors: Transparent, WhiteStandard Aluminium Mounting ProfileTLX10 TLX15 TLX16 TLX22 22mm 9.5mm 18mm 17.5mm 19mm 13.8mm WWW.TOTALLUX.NL 87 L2L1Length (mm) L1 (mm) L2 (mm) Scew Hole (Ømm) Hole Number35 17,5 - Ø3,5 1500 50 200 Ø3,5 31000 100 200 Ø3,5 52000 100 200 Ø3,5 10Color: Silver
Mounting Profiles LED Flexlines 2019Hybrid Mounting Profile (Plastic & Aluminium) TLX8 TLX10 TLX15 TLX16 TLX2214.7mm 23mm 26mm 11.2mm 23mm 7.5mm 7.5mm 16mm 19mm 14mm 14mm 20.8mm L2 L1 Φ3.5mmLength (mm) L1 (mm) L2 (mm) Scew Hole (Ømm) Hole Number35 17,5 - Ø3,5 1500 50 200 Ø3,5 31000 100 200 Ø3,5 52000 100 200 Ø3,5 10Colors — PC: Transparent, Milky White. Aluminium: Black, SilverAluminium Curve Mounting Profile TLX15 4.76mm 4.76mm 10.7mm 14.3mm0.4mm 14.3mm 24.5mm 13.2mm 100/300/500/900mm TLX22 4.8mm20mm 14.9mm 0.4mm 17.5mmLengths: 100mm, 300mm, 500mm, 900mm — Color: Silver88 WWW.TOTALLUX.NL
LED Flexlines 2019 Mounting ProfilesAluminium Self Lock Mounting ProfileTLX10 TLX15 TLX22 22.3mm 25.6mm 22.3mm 20.7mm 12.8mm 16.2mm 3.5L1 L L3 L2 3.5 L4Model Length (mm) L1 (mm) L2 (mm) L3 (mm) L4 (mm) Hole (mm) Hole Nr. Clip Nr.TLX10/TLX15 35 17,5 - - - Ø3,5 1 1 500 25 225 50 200 Ø3,5 3 3 1000 25 237,5 100 200 Ø3,5 5 5 2000 25 243,8 100 200 Ø3,5 10 9TLX22 35 17,5 - - - Ø3,5 1 1 500 25 150 50 200 Ø3,5 3 4 1000 25 190 100 200 Ø3,5 5 6 2000 25 195 100 200 Ø3,5 10 11Color: SilverAluminium Self-Lock Profile Shapes TLX10 TLX15 TLX22L-Shape 3.5 Φ3.5 3.5 100mm 100mm 100mm 3.5 3.5 Φ3.5 100mm 100mm 100mmOutward L-Shape 100mm 100mm 100mm 100mm 100mm 100mmOutward L-Shape 100mm 100mm 100mm 100mm 100mm 100mm WWW.TOTALLUX.NL 89
Mounting Profiles LED Flexlines 2019 TLX10 TLX15 TLX22T-Shape 3.5 Φ3.5 65mm 65mm 3.5 3.5 Φ3.5 65mm Φ3.5 150mm 3.5 150mm 150mm 3.5 3.5X-Shape 3.5 Φ3.5 3.5Bottom Feed 3.5 3.5 3.5 3.5 3.5 3.5 150mm 150mm Φ3.5150mm Φ3.5 3.5 150mm 150mm Φ3.5 150mm 100mm 3.5 100mm 3.5 100mm 3.5 3.5 3.5Middle Feed 3.5 3.5 3.5 3.5 3.5 100mm 100mm 100mm 3.5 Φ3.5Side Feed Right 3.5 3.5 Φ3.5 100mm 3.5 100mm 100mm 3.5Side Feed Right 100mm 3.5 100mm 3.5 100mm Φ3.5 3.5 3.5 Φ3.590 WWW.TOTALLUX.NL
LED Flexlines 2019 Mounting Profiles WWW.TOTALLUX.NL 91
TOTALLUX B.V. was established in 2003 and is specialized inlighting solutions and LED lighting. TOTALLUX offers the \"total\"solution for your lighting \"lux\" ideas - ranging from standardsparts to specials for the industry. The TOTALLUX lightingsupplies program includes standard lighting components -from the plug up to the light source - LED lights, completeprojects, and special prelude fixtures. TOTALLUX is capableof converting your drawing or model to the compontents andfixtures needed for your desired endproduct. This allows you to create your own exclusive look. Antennestraat 76 • 1322 AS Almere • The Netherlands TEL +31 (0)36 529 1756 • FAX +31 (0)36 529 1757 info@totallux.nl • www.totallux.nl
Search
