Company Directory (Continued) EXOVA (630) 221-0385 194 Internationale Boulevard, Glendale Heights, IL 60139 Fax (630) 221-0796 www.excova.com FINKL STEEL (314) 378-5115 308 Eirene Street, Arnold, MO 63010 Fax (773) 348-5347 Jeff Chism www.finkl.com FLOW SCIENCE, INC. (505) 982-0088 683 Harkle Rd., Ste. A., Santa Fe, NM 87505 Fax (505) 982-5551 Amanda Ruggles www.flow3d.com/cast FRECH U.S.A. Inc. (219) 874-2812 6000 Ohio St., Michigan City, IN 46360 Fax (219) 874-2434 Chad Adkins www.FrechUSA.com FTS DELIVERY, INC. / FTS EXPRESS, INC. (800) 995-5596 / (314) 721-3399 8585 Page Ave., St. Louis, MO 63114 www.ftsdelivery.com Gordon Webb GATEWAY METALS, INC. (800) 229-7842 / (314) 918-1111 9550 Watson Ind. Park, Crestwood, MO 63126 Fax (314) 918-1213 Dave Biscan Pete Schiavone www.gatewaymetals.com GH TOOL & MOLD, INC. (636) 390-2424 28 Chamber Drive, Fax (636) 390-2626 Washington, MO 63090-5279 www.ghtool.com Charlie Bruder Kurt E. Lorch Dave L. Graves Gary Shoemaker Pat Green Rick Spillman GLOBAL MOLD TECH MANAGEMENT (763) 536-5590 90 Clearview St, Pointblank, TX 77364 (763) 535-8938 GODFREY & WING INC. (800) 241-2579 / (330) 562-1440 220 Campus Drive, Aurora, OH 44202 Fax (330) 562-1510 Andy Marin www.godfreywing.com GOFF, INC. (800) 654-4633 / (405) 278-6200 12216 NS 3520, Seminole, OK 74868 Fax (405) 382-7013 Tim Fenner www.goff-inc.com GUYMON-HARVEY WORLDWIDE CASTING SOLUTIONS (573) 577-8102 P.O. Box 82, Monroe City, MO 63456-0082 www.guymonharvey.com Robert Hoover Ronald M. Williams HELLEBUSCH TOOL & DIE, INC. (636) 239-7543 4 South Link Drive, Washington, MO 63090-1111 Fax (636) 239-2893 Jeffrey Hellebusch Robert Rockwell www.htdinc.com 49
Thermodur® Thermodur® Hot Work Die Steels are engineered for maximum toughness and thermal fatigue resistance under extreme conditions. » 2344 EFS » 2344 Magnum - North American Industry Standard » 2367 Superclean - Maximum Heat Checking Resistance » E38K - Maximum Impact Toughness » E40K Superclean - Improved Toughness and Heat Checking Resistance NEW www.schmolz-bickenbach.us www.schmolz-bickenbach.ca Phone: +1 800 323 1233 50 50
Company Directory (Continued) HITACHI METALS AMERICA LLC (847) 364-7200 85 W. Algonquin Road, Suite 400, Arlington Hts., IL 60005 Fax (847) 364-7279 Joe Guajardo HILL AND GRIFFITH COMPANY, THE (800) 543-0425 / (513) 921-1075 1085 Summer Street, Cincinnati, OH 45204 Fax (513) 921-9180 Samantha Farris Mike Lawry www.hillandgriffith.com HYDRO-GEAR (217) 728-2581 1411 S. Hamilton St., Sullivan, IL 61951-2265 www.hydro-gear.com IMPERIAL ZINC CORP. (773) 264-5900 1031 East 103rd Street, Chicago, IL 60628 Fax (773) 264-5910 Dave Goss www.imperialzinc.com INTERNATIONAL MOLD STEEL INC. (800) 625-6653 / (859) 342-6000 6796 Powerline Dr., Florence, KY 41042 Fax (859) 342-6006 Paul Britton Barb Castilano Tom Schade www.imsteel.com INTERNATIONAL SEW-RIGHT (905) 374-3600 6190 Don Murie St., Niagara Falls, Ontario L2E 6X8 Fax (905) 374-6121 Lyse Moreau www.safetyclothingcanada.com JOHN DEERE (800) 765-9588 1 John Deere Place, Moline, IL 61265-8010 www.deere.com Hema Guthy JOST MACHINERY 800-222-9607 / (636) 391-7887 173 Clarkson Executive Park, Ellisville, MO 63011-2176 Fax (636) 391-4890 Vic Jost www.jostmachinery.com JTEKT AUTOMOTIVE TENNESSEE-MORRISTOWN INC. (423) 585-0999 1016 W. Skyline Dr., Morristown, TN 37813-2678 Fax (423) 585-2941 Joshua Shelton KILLARK ELECTRIC (314) 531-0460 3940 Dr Martin Luther King Drive, Saint Louis, MO 63113-3316 Fax (314) 531-7164 Adam Radetic www.hubbell-killark.com K.L. STEWART AND ASSOCIATES, INC. (262) 376-0600 1959 Wildwood Drive, Cedarburg, WI 53012 Fax (262) 238-9983 Doug Ferrell KLOCKOWSKI & ASSOCIATES, INC. (847) 931-9113 9N824 Apache Run, Elgin, IL 60124 Fax (847) 931-9154 L.K. MACHINERY (616) 796-0777 4508 128th Avenue, Holland, MI 49424 Fax (616) 582-6060 www.lkadvantage.com 51
THANK YOU FOR YOUR SUPPORT REPRESENTING THE FINEST IN DIE CASTING, FOUNDRY, & FORGING EQUIPMENT WWW.RBETSALES.COM RON STEININGER JR. SAM DURBIN PRESIDENT SALES ENGINEER c. 479.650.7568 c. 636.368.1307 e. [email protected] e. [email protected] 52
Company Directory (Continued) LaFRANCE MANUFACTURING CO. (314) 298-2662 124 Millwell Drive, Box 1008, Fax (314) 298-3420 Maryland Heights, MO 63043-0008 www.lafrancemfg.com Mark Kruszynski Joy Miltenberger Donald Richhart LAKESIDE CASTING SOLUTIONS (573) 735-2426 2 Lakeside Dr., Monroe City, MO 63456 Fax (573) 735-1709 Ronald Burditt Michael Hetheriton www.lakesidecasting.com Carl Donath Charles K. Mudd LINDBERG/MPH (269) 849-2700 P.O. Box 131 Riverside Road, Riverside, MI 49084 Fax (269) 849-3021 Andrea Strand www.lindbergmph.com M-K DISTRIBUTING CO., INC. (800) 553-6012 / (636) 390-4111 6310 Bluff Road, Washington, MO 63090 Fax (636) 390-4744 Kathy Hofstra www.mkdistributing.com MAGMA FOUNDRY TECHNOLOGIES, INC. (847) 252-1650 10 North Martingale Road, Suite 425, Schaumburg, IL 60173 Fax (847) 969-1003 www.magmasoft.com MEITLER CONSULTING INC. (913) 422-9339 16979 Chieftain Road, P.O. Box 444, Tonganoxie, KS 66086 Fax (913) 845-2950 Paul Bedke Brian Meitler www.mciclay.com Kristopher Kenney Bill Paul MIDLAND INDUSTRIES, INC. (800) 662-8228 / (312) 664-7300 1424 North Halsted Street, Chicago, IL 60642 Fax (312) 664-7371 Garvey Madden www.zincbig.com MIDLAND TECHNOLOGIES, INC. (763) 428-4229 14800 James Road, Rogers, MN 55374 Fax (763) 428-4720 Brenda Frechette www.midlandtechnologies.com MO-TECH CORPORATION (651) 770-1515 2920 Granada Avenue North, Oakdale, Minnesota 55128 Fax (651) 770-8926 www.mo-tech.com MUELLER MACHINE & TOOL COMPANY (314) 522-8080 5932 Jackson, St. Louis, MO 63134 Fax (314) 522-8003 Debbie Duvall www.muellermachine.com NEFF PRESS INC. (314) 854-1200 6510 Page Ave., St. Louis, MO 63133 Fax (314) 725-2230 John D. Murphy www.neffpress.com NIDEC MOTOR CORPORATION (888) 637-7333 8050 West Florissant Avenue, St. Louis, MO 63136 www.nidec-motor.com Stephen Fall 53
Repairing and rebuilding die cast machines with over 30 years of experience. TOP HALF REBUILD COMPLETE REBUILD A Top-Half Machine Rebuild Complete rebuilding of your of your die cast machine die cast machine putting offers significant time & cost you in the drivers seat as to savings. The customer will what you would like in your experience less downtime Machine. Rebuilding of Die as the base of the machine Cast Machines from small to does not have to be large. removed and shipped. ON-SITE MACHINING PARTS Machining of platens, line Repairing or new manufacture boring, milling and boring, of die cast machine component T-slotting, and more at parts. Tie bars and nuts, linkage, your facility. pins and bushings, shoes and rails, and more. A+Plus Machine LLC 20521 State Hwy. 64, Cornell, WI 54732 Email [email protected] Tel 715.239.6915 Fax 715.239.6903 www.aplusmachine.com 54 54
Company Directory (Continued) OZARK DIE CASTING CO. (636) 629-4244 1005 Lofting Industrial Drive, St. Clair, MO 63077-1081 Fax (636) 629-2153 John Brueggemann Gary Land www.ozarkdie.com PATTERSON MOLD & TOOL, INC. (636) 940-9988 1005 Portwest Drive Fax (636) 940-0225 St. Charles, MO 63303-5971 www.pattersonmold.com John Dotson Daniel Maricic Tom Tierney Timothy M. Gehrs James V. Martin David W. Trantina PAULO PRODUCTS COMPANY (314) 647-7500 5711 West Park Avenue, St. Louis, MO 63110-1890 Fax (314) 647-7518 Phil Harris Robert Simons www.paulo.com Will Rassieur PCS (800) 521-0546 / (586) 294-7780 34488 Doreka Dr., Fraser, MI 48026 Fax (800) 505-3299 / (586) 294-7799 Kory Kline www.pcs-company.com POPLAR BLUFF TOOL & DIE (573) 785-9255 266 Township Line Road, Poplar Bluff, MO 63901 Fax (573) 785-2672 Steve R. Amlong PRECISION TOOL CO. (800) 553-2023 / (314) 721-2899 875 Kingsland Avenue, St. Louis, MO 63130-3113 Fax (314) 721-4432 Peter Manoff www.shotsleeve.com PRODUCTION CASTINGS, INC. (636) 677-3364 1410 West Lark Industrial Park, Fax (636) 305-1265 Fenton, MO 63026-4340 www.productioncastings.com John Konopka Jeff Loeffelman Mark Preuss Alan Loeffelman Kevin Loeffelman Brian Z. Smith Chad A. Loeffelman Paul K. Loeffelman Carol A. Struckman Christopher Loeffelman Eric Mason Vince Travers Jayson Loeffelman Gary Mills R-BET SALES, INC. (479) 632-0875 3101 Aerie Ln., Alma, AR 72921-5052 Fax (479) 632-0876 Ron Steininger, Jr. www.rbetsales.com REGAL BELOIT CORPORATION (608) 364-8800 200 State Street, Beloit WI 53511-6254 Fax (608) 364-8816 Mangesh Vibhandik www.regalbeloit.com REGLOPLAS CORPORATION (888) 799-4110 / (269) 428-1100 1088 Miners Road, St. Joseph, MI 49085-9625 Fax (269) 428-1155 Henry Vangemert www.regloplasusa.com 55
6310 Bluff Road, Washington, MO 63090 Phone: 636-390-4111 or 1-800-553-6012 • Fax: 636-390-4744 Email: [email protected] or [email protected] www.mkdistributing.com 56
Company Directory (Continued) RIMROCK CORPORATION (614) 471-5926 1700 Jetway Boulevard, Columbus, OH 43219 Fax (614) 471-7388 www.rimrock.com RITCHEY METALS COMPANY, INC. (800) 899-6358 / (724) 745-7700 30 Georgetown, Rd. Canonsburg, PA 15317 Fax (724) 745-8040 Mark Vankirk www.ritcheymetals.com SCHAEFER GROUP, INC. (937) 253-3342 1500 Humphrey Ave., Dayton, OH 45410 Fax (937) 253-2306 David White www.theschaefergroup.com SCHMOLZ + BICKENBACH US (800) 323-1233 365 Village Drive, Carol Stream, IL 60188 Canada (800) 268-4977 John Stocker www.schmolz-bickenbach.us www.schmolz-bickenbach.cam SCHWOEPPE ENGINEERED PRODUCTS (636) 433-2532 16240 Suite A, Hwy. O, Marthasville, MO 63357 Fax (636) 433-2540 Dale A. Schwoeppe www.schwoeppemachine.com SCHWOEPPE MACHINE & TOOL, INC. (636) 433-2532 16240 Suite A, Hwy. O, Marthasville, MO 63357 Fax (636) 433-2540 Dale A. Schwoeppe www.schwoeppemachine.com SDC INCORPORATED (573) 468-3107 945 Franklin Street, Sullivan, MO 63080-1256 Fax (573) 468-8966 Jay Graeser Jerome C. Graeser www.sdcinc.com Jason Carl Graeser Crystal Pyatt SHAPIRO METALS (314) 381-9300 9666 Olive Blvd, Suite 500, St. Louis, MO 63132 Fax (314) 381-4728 Rick S. Dobkin Michael K. Martin www.shapirometals.com SPARTAN LIGHT METAL PRODUCTS, INC. (314) 620-2500 510 East McClurken Avenue, Fax (314) 620-2599 Sparta, IL 62286-1850 www.spartanlmp.com Micheal W. Dierks Stephen Gordon Charles Voigt Kenneth V. Epplin Shawn Long Ken Fehr Kevin Monahan SPARTAN LIGHT METAL PRODUCTS, INC. (573) 406-0530 4649 Route MM, Hannibal, MO 63401 Fax (314) 620-2599 Chris Hathaway Tim Kurz Michael White www.spartanlmp.com SPARTAN LIGHT METAL PRODUCTS, INC. (573) 581-2272 2510 Lakeview Road, Mexico, MO 65265-1391 Fax (573) 581-9211 Jeff Ferry Ted C. Waltemate www.spartanlmp.com Travis Rowden 57
58
Company Directory (Continued) SPARTAN LIGHT METAL PRODUCTS, INC. - CORPORATE OFFICE (314) 620-2500 3668 S. Geyer Road, Suite 210, Fax (314) 620-2599 St. Louis, MO 63127-1243 www.spartanlmp.com Bruce Breitzman Donald Jubel John Hefferle Lisa Mueller Tom Heizer SPECTRO ALLOYS CORP. (651) 480-6124 13220 Doyle Path, Rosemount, MN 55068 Fax (651) 438-3714 Alan R. Gergen www.spectroalloys.com SUNNEN PRODUCTS COMPANY (314) 781-2100 7910 Manchester Road, St. Louis, MO 63143 Fax (314) 781-2268 www.sunnen.com ST. LOUIS TOOL SUPPLY, INC. (314) 894-9090 1020 Fox Chase Ind. Dr., Arnold, MO 63010 Fax: (314) 894-9094 Doug Pasco www.stltool.com THERMALTEK, INC. (704) 784-3001 2800 Armentrout Drive, Concord, NC 285025 Fax: (704) 784-3020 Bret Chapman www.thermaltek.com TOOLING ASSOCIATES (314) 517-8794 / (314) 739-2915 3751 Three Oaks, Bridgeton, MO 63044 Fax (314) 739-4709 Chuck Shadow TOSHIBA MACHINE CO., AMERICA (800) 275-8373 / (847) 709-7400 755 Greenleaf Avenue, Elk Grove Village, IL 60007 Fax (847) 593-0897 Elizabeth Shumway www.toshiba-machine.com TOTALL METAL RECYCLING (866) 470-5763 / (618) 877-0585 2700 Missouri Avenue, Granite City, IL 62040-2029 Fax (618) 877-0591 Dennis Meyer www.tmrusa.com TURN KEY TOOL & DIE (636) 583-4505 8 Progress Parkway, Union, MO 63084 Fax (636) 583-4525 William Stockhorst www.tktool.net VIKING CORP. (316) 634-6699 731 S. Industrial Ct., Rose Hill, KS 67133 Fax (316) 634-6658 Deron J. Lock vikingcorporation.com WHEELABRATOR / NORICAN GROUP (800) 845-8508 / (905) 319-7930 1606 Executive Drive, LaGrange, GA 30240 Fax (905) 319-7561 Pam Akin wheelabratorgroup.com WISCONSIN OVEN CORP. (800) 845-8508 / (905) 319-7930 2675 Main Street, East Troy, WI Fax (905) 319-7561 wheelabratorgroup.com 59
DIE CASTING EXECUTIVE CONFERENCE 2018 SCHEDULE OF EVENTS * FEBRUARY 25-28, 2018 MARRIOTT KEY WEST BEACHSIDE | KEY WEST, FLORIDA SUNDAY, FEBRUARY 25 9:00-10:00 am The State of the Economy and 5:00-7:00 pm Registration & Cocktail Reception Economic Forecast Mike Verhulst, Verhulst Wealth Management MONDAY, FEBRUARY 26 10:00-10:15 am Break 7:45-8:45 am Breakfast 10:15-11:15 am Shop Floor Intelligence and Statistical 9:00-10:00 am Marketing and Diversification Monitoring in Marketing Jeff Trumble, Trumble Inc. Michael P. Collins, MPC Management 12:00 pm Golf Outing** 10:00-10:15 am Break Optional Event 10:15-11:15 am How to Sell Your Company 12:30 am Lunch and Spouse Event** Jim Folk, The Folk Group Optional Event 11:15-12:15 pm Impact of the TrumpAdministration 7:00-9:30 pm Banquet on Trade, Regulation and Taxes Omar Nashashibi, The Frankling Partnership WEDNESDAY, FEBRUARY 28 12:30-1:30 pm Lunch 7:45-8:45 am Breakfast 1:30-2:30 pm Die Casting Benchmarking and 9:00-10:00 am TBA Assessment Results TBA James Ricci, Harbour Research 10:00-10:15 am Break 2:30-3:30 pm Industry Trends: Hype Versus Reality 10:15-11:15 am How to Get 20% of Your Reps’ Time Jeff Moyer, Gibbs Die Casting Corp. If You Are Only 20% of Their Income 3:30-4:30 pm NADCA Safety Assessment Results Charles Cohon, MANA Steve Udvardy, NADCA 11:15-12:00 pm Round Table Discussion TUESDAY, FEBRUARY 27 12:00 pm Conference Adjourns 7:45-8:45 am Breakfast *Schedule as of 10/11/2017, subject to change. FIND MORE INFORMATION ONLINE AT WWW.DIECASTING.ORG NORTH AMERICAN DIE CASTING ASSOCIATION 60
Flex Automation, LLC – We offer a large selection of used ABB Robots, Parts and Repairs. Hildreth Manufacturing, LLC - Beryllium copper plunger tips and ION Nitride Steel Ring tips. We also offer a “recycling” program to buyback used tips. Excellent Quality, Service, and Delivery. Yizumi/HPM - HPM die casting machines from 400T - 4500T. Decades of experience in producing rugged, dependable machines. Parts and Service. ITL Machinery Services - Complete remanufacturing services for all machine makes and models. From pin/bushing work to Total remanufacturing. Used Machines, parts and linkage swaps. Metal Mechanics Inc.- Vertical and Horizontal trim presses. Rollover presses and Unloaders. Optional Energy on Demand feature. We also rebuild and upgrade existing presses. Used presses also available. Regloplas Corp. – The absolute Finest TCU’s. Single, Dual and Custom zones. Hot Oil and Pressurized Water Units. Trial units available Visi-Trak Worldwide, LLC - Process Monitoring Equipment (central and portable), Sure-Trak real time closed loop shot control system. Position/Velocity sensors. . Please call Doug Ferrell at 262.376.0600 Email [email protected] 61 61
FILTERED ALUMINUM INGOT ALLOYS Alum. Assn. Si Fe Cu Mn Mg Cr Ni Zn Sn Ti OE OT Alloy A380.1 7.5-9.5 1.0 3.0-4.0 .50 .10 .50 2.9 .35 .50 B380.1 7.5-9.5 1.0 3.0-4.0 .50 .10 .50 0.9 .35 .50 383.1 9.5-11.5 0.6-1.0 2.0-3.0 .50 .10 .30 2.9 .15 .50 384.1 10.5-12.0 1.0 3.0-4.5 .50 .10 .50 2.9 .35 .50 A384-17. 10.5-12.0 1.0 3.0-4.5 .50 .10 .50 .9 .35 .50 A413.1 11.0-13.0 1.0 1.0 .35 .10 .60 .40 .15 .25 A360.1 8.0-10.0 1.0 .60 .35 .45-.60 .50 .40 .15 .25 B390 16.0-18.0 1.0 4.0-5.0 .50 .50-.65 .10 1.4 .20 .10 .20 319.1 5.5-6.5 .80 3.0-4.0 .50 .10 .35 1.0 .25 .50 355.1 4.5-5.5 .50* 1.0-1.5 .50* .45-.60 .25 .35 .25 .05 .15 356.1 6.5-7.5 .50* .25 .35* .25-.45 .35 .25 .05 .15 C443.2 4.5-6.0 1.0 0.80 .35 0.10 .50 .40 .15 .25 535.2 .10 .10 .05 .10-.25 6.6-7.5 .10-.25 .05 .15 (*If Fe content exceeds .45%, Mn shall be at least 1/2 of the Fe content.) FILTERED ZINC-ALUMINUM INGOT ALLOYS Alloy Mg Al Cu Fe Sn Cr Pb Cd Ni ZA8 .020-.030 8.2-8.8 .80-1.3 .065 .002 .0 .005 .005 .01 ZA12 .020-.030 10.8-11.5 .50-1.20 .065 .002 .01 .005 .005 .01 ZA27 .012-.020 25.5-28.0 2.0-2.5 .072 .002 .01 .005 .005 .01 FILTERED ZINC INGOT ALLOYS Alloy Mg Al Cu Fe Sn Cr Pb Cd Ni Zamak2 .025-.05 3.9-4.3 2.6-2.9 .075 .002 .02 .004 .003 .02 Zamak3 .025-.05 3.9-4.3 .10 .075 .002 .02 .004 .003 .02 Zamak5 .03-.06 3.9-4.3 .75-1.25 .075 .002 .02 .004 .003 .02 Zamak7 .010-.02 3.9-4.3 .10 .075 .001 .02 .002 .002 .005-.020 89 62 62
Education Mission Statement “Each individual NADCA chapter maintains the sole re- sponsibility to organize, provide and distribute NADCA technical, educational programs and services to its indi- vidual chapter membership. These services are to be or- ganized and administered under the guidelines that have been established by input from both the Industry Education Committee and the individual chapters. In addition, the individual chapters shall participate in the administrative challenges facing the industry by accepting and soliciting roles, positions and requests within the Industry Education Framework.” Chapter 17 Scholarship Fund In the interest of maintaining a high level of professionalism in the Die Casting Industries, NADCA, North American Die Casting Associa- tion Chapter 17, may provide Scholarships to selected students that meet the following criteria: The candidate must be a United States citizen; must be accepted aca- demically as a full time student enrolled in a minimum of a two (2) year program at a technical or trade school or in a four (4) year college or university program; must have completed one (1) year of instruction in a curriculum relevant to the Die Casting or a related industry; and preferably have employment experi- ence with a company producing Die Castings or with a Die Casting equipment supplier or be will- ing to accept such temporary employment experi- ence. A letter of reference may be provided by a NADCA Chapter 17 member but is not required. An Application Form, available from NADCA Chapter 17, requesting this Scholarship are to be sent to the current Scholarship Chairperson of NADCA Chapter 17 no later then June 1 of the year in which the student will be enrolling the following fall semester. The Scholarship Award will be presented in the form of a check to the student. David Coulter Scholarship Chairman NADCA Chapter 17 20 Peppermill Ct. Wildwood, Missouri 63005 63
2018 Scholarship Application Scholarship Application Scholarship Application NADCA St. Louis – Chapter 17 NADCA St. Louis – Chapter 17 NADCA St. Louis – Chapter 17 SECTION I – Instructions SECTION I – Instructions This application is to be completed by all students wishing to be considered for the NADCA Chapter This application is to be completed by all students wishing to be considered for the NADCA Chapter 17 This application is to be completed by all students wishing to be considered for the NADCA Chapter 17 17 Scholarship. The Scholarship Committee will review all applications and make award(s) to those Scholarship. The Scholarship Committee will review all applications and make award(s) to those students whose Scholarship. The Scholarship Committee will review all applications and make award(s) to those students whose students whose academic and extracurricular activities show leadership, academic success and academic and extra-curricular activities show leadership, academic success and a desire to succeed. To be eligible academic and extra-curricular activities show leadership, academic success and a desire to succeed. To be eligible a desire to succeed. To be eligible for this scholarship, you must be associated with a member for this scholarship, you must be associated with a member or company of Chapter 17 or be a student with a major for this scholarship, you must be associated with a member or company of Chapter 17 or be a student with a major or company of Chapter 17 and be a student with a major in the manufacturing or diecasting field. in the manufacturing or die-casting field. You must be presently attending or have received notice of acceptance at in the manufacturing or die-casting field. You must be presently attending or have received notice of acceptance at You must be presently attending or have received notice of acceptance at an accredited college an accredited college or technical institute. Proofs of school acceptance or school transcripts are required. $1000 an accredited college or technical institute. Proofs of school acceptance or school transcripts are required. $1000 award per person or persons selected. or technical institute. Proofs of school acceptance or school transcripts are required. $1000 award award per person or persons selected. per person or persons selected. Only those applications that are completed will be considered. Only those applications that are completed will be considered. Please mail your completed application to NADCA – Only those applications that are completed will be considered. Please mail your completed application to NADCA – Please mail your completed application to NADCA – Chapter 17, Attn: David Coulter, 20 Peppermill Chapter 17, Attn: David Coulter, 20 Peppermill Ct. Wildwood, Missouri, 63005, Phone: 314 422 1108 Chapter 17, Attn: David Coulter, 20 Peppermill Ct. Wildwood, Missouri, 63005, Phone: 314 422 1108 Ct. Wildwood, Missouri, 63005, Phone: 314-422-1108 Successful Scholarship candidates will be Successful Scholarship candidates will be notified on selection results. Application deadline is April 30, 2011. Successful Scholarship candidates will be notified on selection results. Application deadline is April 1, 2009. notified on selection results. Application deadline is June 30th. . SECTION II – Contact Information SECTION II – Contact Information Student’s Name: _________________ Student’s Name: _________________ Address: Street _________________ Address: Street _________________ ___________ ___________ City State Zip State City Zip Phone Number (______) __________________ Cell Phone (______) _________________ Phone Number (______) __________________ Cell Phone (______) _________________ Email Address _____________________________________________________________ Email Address _____________________________________________________________ SECTION III – Community Service SECTION III – Community Service Please list any community service or volunteer activities in which you have participated: Please list any community service or volunteer activities in which you have participated: ______ ______ ______ ______ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ ______________________________________________________________________________ SECTION IV – Work Experience SECTION IV – Work Experience __________________ __________________ Company Address Employment Date(s) Casting Related ? (Y / N) Hrs. per week Company Employment Date(s) Casting Related ? (Y / N) Hrs. per week Address Duties _______________________________________________________________________________________ Duties _______________________________________________________________________________________ _____________________________________________________________________________________________ _____________________________________________________________________________________________ Company Address Employment Date(s) Casting Related ? (Y / N) Hrs. per week Address Company Employment Date(s) Casting Related ? (Y / N) Hrs. per week Duties _______________________________________________________________________________________ Duties _______________________________________________________________________________________ 64 64
SECTION V – College/Technical School Plans Name & Location of the school attending ___________________________________________ _____________________________________________________________________________ Major/Intended Study: ___________ Have you been accepted? ____________________________________________________ Expected graduation date? ___________________________________________________ Cumulative Grade Point Average (G.P.A) ? _____________________________________ SECTION VI – Interview Please write one paragraph on why you are uniquely qualified to receive this scholarship. Section VII – Sponsor Company of Sponsor: __________________ Name of Employee from Sponsor Company & length of employment: Relationship to Employee from Sponsor Company: 65 65
List of A ________________________ D ________________________ Members Adams, Rich Das, Subodh Davis Tool & Die [email protected] [email protected] Dierks, Michael W. Alcantara, Arturo Spartan Light Metal Products Inc. Anderton Castings LLC [email protected] [email protected] Amlong, Steve R. Dobkin, Rick S. Shapiro Metals Poplar Bluff Tool & Die [email protected] [email protected] Donath, Carl Lakeside Casting Solutions B ________________________ [email protected] Bedke, Paul Dotson, John Meitler Consulting Inc. Patterson Mold & Tool [email protected] [email protected] Bethel, Don Amercian Precision Die Casting E ________________________ dbethel@ americanprecisiondiecasting.com Eads, Jonathan Briggs & Stratton Corp. - Breitzman, Bruce Poplar Bluff Spartan Light Metal Products [email protected] [email protected] Epplin, Kenneth V. Bruder, Charlie Spartan Light Metal Products - GH Tool & Mold Inc. Corporate Office [email protected] [email protected] Brueggemann, John Ozark Die Casting Co. F ________________________ [email protected] Fehr, Ken Burditt, Ronald Spartan Light Metal Products Inc. Lakeside Casting Solutions [email protected] [email protected] Ferry, Jeff Spartan Light Metal Products LLC C ________________________ [email protected] Campbell, Lyndsey G ________________________ American Precision Die Casting lcampbell@ Garner, Daniel americanprecisiondiecasting.com Briggs & Stratton Corp. - Poplar Bluff Clonts, Michael J. [email protected] American Precision Die Casting [email protected] Gehrs, Timothy M. Patterson Mold & Tool Coulter, David Neil [email protected] [email protected] 66
North American Sales Manager 67
List of Gordon, Stephen Hercules, Kevin Members Spartan Light Metal Products Inc. Amercian Precision Die Casting [email protected] khercules@ Grace, Mac americanprecisiondiecasting.com Chem-Trend LP Hetheriton, Michael [email protected] Lakeside Casting Solutions Graeser, Jason Carl [email protected] SDC Incorporated Hoover, Robert [email protected] Guymon-Harvey Worldwide Graeser, Jerome C. Casting Solutions [email protected] SDC Incorporated [email protected] I ________________________ Graves, Dave L. GH Tool & Mold Inc. Innes, Robert [email protected] Paulo Products Company [email protected] Green, Pat GH Tool & Mold Inc. J ________________________ [email protected] Jansberg, Tom Ground, Charles Castings For Industry Anderton Castings LLC [email protected] [email protected] Jost, Vic Guajardo, Joe Jost Machinery Hitachi Metals Amercia LLC [email protected] Guthy, Hema Jubel, Donald John Deere Spartan Light Metal Products [email protected] [email protected] H ________________________ K ________________________ Hathaway, Chris Spartan Light Metal Products LLC Kenny, Kristopher [email protected] Meitler Consulting Inc. [email protected] Hefferle, John Kinsey, Wayne Spartan Light Metal Products Briggs & Strattib Corp. - [email protected] Poplar Bluff Heizer, Tom [email protected] Spartan Light Metal Products Koch, Alan Anthony [email protected] [email protected] Hellebusch, Jeffrey Hellebusch Tool and Die Inc. Konopka, John [email protected] Production Castings Inc. [email protected] 68
WE WISH TO THANK THE FOLLOWING SUPPLIERS FOR THEIR EXCELLENT SUPPORT FOR OUR 33 Annual rd NADCA CHAPTER 17 GOLF OUTING THANKS! ALLIED METAL AMERICAN PRECISION DIE CASTING BOHLER-UDDEHOLM CORP. BUHLER PRINCE INC. (2) ELLWOOD SPECIALTY STEEL ENGINEERED LUBRICANTS CO. FTS DELIVERY INC. FINKYL STEEL FRECH USA GATEWAY METALS, INC. GH TOOL & MOLD HELLEBUSCH TOOL & DIE IMPERIAL ZINC LaFRANCE MANUFACTURING COMPANY MK DISTRIBUTING (2) MIDLAND INDUSTRIES, INC. MIDLAND TECHNOLOGIES, INC. OERLIKON USA OZARK DIE CASTING PATTERSON MOLD AND TOOL INC. PAULO PRODUCTS COMPANY POPLAR BLUFF TOOL AND DIE PRODUCTION CASTINGS, INC. QUAKER CHEMICAL R-BET SALES INC. RIMROCK (2) SCHMOLZ & BICKENBACH USA SDC INC. SPECTRO ALLOYS TURN KEY TOOL & DIE Thanks also To Those who donaTed gifTs: GH TOOL & MOLD, MK DISTRIBUTING, HITACHI METALS & THE SCHAEFER GROUP THE 2017 GOLF OUTING PARTICIPANTS 69 69
List of Kruszynski, Mark Lorch, Kurt E. Members LaFrance Manufacturing Co. GH Tool & Mold Inc. [email protected] [email protected] Kurz, Tim Spartan Light Metal Products LLC M ________________________ [email protected] Manoff, Peter Precision Tool Co. [email protected] L ________________________ Land, Gary Maricic, Daniel Ozark Die Casting Co. Patterson Mold &Tool [email protected] Leath, Ernie GH Tool & Mold Inc. Martin, James V. [email protected] Patterson Mold & Tool [email protected] Lecoutre, Camille Anderton Castngs LLC Martin, Michael K. [email protected] Shapiro Metals [email protected] Loeffelman, Alan Production Castings, Inc. Martinez, Celia [email protected] Anderton Castings LLC [email protected] Loeffelman, Chad A. Production Castings, Inc. Mason, Eric [email protected] Production Castings Inc. [email protected] Loeffelman, Christopher Production Castings, Inc. Matchell, Tony David [email protected] American Precision Die Casting tmatchell@ Loeffelman, Jayson americanprecisiondiecasting.com Production Castings, Inc. [email protected] Meitler, Brian Meitler Consulting Inc. Loeffelman, Jeff [email protected] Production Castings, Inc. [email protected] Meyer, Dennis TOTALL Metal Recycling Loeffelman, Kevin [email protected] Production Castings, Inc. [email protected] Mills, Gary Production Castings, Inc. Loeffelman, Paul K. [email protected] Production Castings, Inc. [email protected] Miltenberger, Joy LaFrance Manufacturing Co. Long, Shawn [email protected] Spartan Light Metal Products - Mir, Darius Corporate Office [email protected] MIA Seating Corp. [email protected] 70
2018 SCHEDULE OF EVENTS • January 16 - Membership Meeting • February 20 - Membership Meeting • March 20 - Membership Meeting • September 28 - Golf Outing • October 16 - Membership Meeting If you have interest in the chapter having a particular program, please contact Jeff Chism at (314) 378-5115 Chapter 17 has accumulated the email addresses for approximately 80% of our membership. If you are not receiving meeting reminders via email, please forward your email address to [email protected] 71
List of Monahan, Kevin Rassieur, Will Spartan Light Metal Products - Paulo Products Company Members Corporate Office [email protected] [email protected] Richhart, Donald Morris, Stephen LaFrance Manufacturing Co. MIA Seating Corp. [email protected] [email protected] Rockwell, Robert Mudd, Charles K. Hellebush Tool and Die Inc. Lakeside Casting Solutions [email protected] [email protected] Rodriguez, Fernando Mueller, Lisa [email protected] Spartan Light Metal Products [email protected] Rowden, Travis Spartan Light Metal Products LLC Murphy, John D. [email protected] Neff Press Inc. [email protected] Rowland, Ron Briggs & Stratton Corp. - Poplar Bluff O ________________________ [email protected] Ostermeyer, David Consultant Lubricants, Inc. S ________________________ [email protected] Schiavone, Pete Gateway Metals P ________________________ [email protected] Paul, Bill Schwoeppe, Dale A. Meitler Consulting, Inc. Schwoeppe Machine & Tool, Inc. [email protected] [email protected] Pope, Kendal Shelton, Joshua American Precision Die Casting JTEKT Automotive Tennessee- kpope@ Morristown Inc. americanprecisiondiecasting.com [email protected] Preuss, Mark Shoemaker, Gary Production Castings Inc. GH Tool & Mold, Inc. [email protected] [email protected] Pyatt, Crystal Simons, Robert SDC Incorporated Paulo Products Company [email protected] [email protected] Smith, Brian Z. R ________________________ Production Castings, Inc. Radetic, Adam [email protected] Killark Electric [email protected] 72
BuhlerPrince Die Casting Systems include; state-of-the-art machine technology with the best solutions in automation. You can count on BuhlerPrince for all your die casting needs including; machines, automation, application engineering, remanufacturing, parts and technical service. BuhlerPrince builds die casting machines up to 4,500 tons in Holland, Michigan USA. BUHLERPRIN CE QUALITY BuhlerPrince, Inc. 670 Windcrest Drive Holland, Michigan 49423 USA; Phone 616 394 8248, Fax 616 394 1250; www.buhlerprince.com You Can Cast On Empowering success. 73
List of Spillman, Rick W ________________________ GH Tool & Mold, Inc. Members [email protected] Waltemate, Ted C. Steele, Mark H. Spartan Light Metal Products LLC [email protected] American Precision Die Casting mhsteele@ White, Michael americanprecisiondiecasting.com Spartan Light Metal Products LLC Stockhorst, William [email protected] Turn Key Tool & Die Wilkinson, Jim [email protected] American Precision Die Casting Struckman, Carol A. jmwilkinson@ americanprecisiondiecasting.com Production Castings, Inc. [email protected] Williams, Ronald M. Guymon-Harvey Worldwide T ________________________ Casting Solutions [email protected] Tierney, Tom Patterson Mold & Tool [email protected] Trantina, David W. Patterson Mold & Tool [email protected] Travers, Vince Production Castings, Inc. [email protected] V ________________________ Vibhandik, Mangesh Regal Beloit Corporation - R&D Center [email protected] Voigt, Charles Spartan Light Metal Products [email protected] 74
NORTH AMERICAN DIE CASTING ASSOCIATION Explore the value of a NADCA Membership The North American Die Casting Association represents the voice of the die casting industry. NADCA is committed to promoting industry awareness, domestic growth in the global marketplace and member exposure. A NADCA Membership contains numerous benefits such as: Input & Access to New Free Subscription to Die Discounted Publications Information & Research Casting Engineer Discounted Online & Listing in the On Site Courses Discounted Industry Surveys Supplier’s Directory Free Access to Technical Registration Discounts for Design Assistance Archives & Safety Standards Conferences & Workshops Weekly NADCA eNewsletter Discounted Advertising Rates And Much More! For more information please contact membership services at: P: 847.808.3165 • [email protected] or visit: www.diecasting.org/membership 75
76
FLYWHEEL & CONVERTER HOUSING TRANSMISSION HOUSING LOWER BLOCK PILLARS CRANK SUPPORT TRANSMISSION CASES AWD HOUSING OIL PANS OIL SUMP VALVEBODY PREMIUM INTERNAL COMPONENT STARTER HOUSING CYLINDER HEADS ROOF FRAMES ALTERNATOR FRAMES STEERING SECTOR CAM COVER CAM SUPPORT REAR TRANSMISSION HOUSING FRONT ENGINE COVERS REAR WHEEL TRANSMISSION FRAME RAIL / CROSS MEMEBER CHASSIS (STRUT TOWERS) ENGINE BLOCK AIR CONDITIONER COMPRESSOR HEADS G.H. TOOL & MOLD 28 Chamber Drive Washington, MO 63090 Phone: 636.390.2424 Fax: 636.390.2626 www.ghtool.com
314.298.2662 [email protected] 2018 YEARBOOK The NorTh AmericAN This ad is to be placed so that this bottom is at the binding. The ad will be sideways on the back This ad is 5.0” x 8.0”. Our ad from the 2015 book has a black border around it. We want to LaFRANCE Die cAsTiNg AssociATioN LaFRANCE LaFRANCE continue using that black border format for this ad also. LaFRANCE YOUR DIRECT SOURCE FOR: DIE RELEASE LUBRICANTS FRANDRY PLUNGER LUBRICANTS CERAMIC COATINGS SPECIALTY PRODUCTS NEXT DAY SHIPPING NADCA Chapter 17 • St. Louis, Missouri 2O18 Yearbook cover. Keeping AMeriCA greAt CHAPTER 17
Search
