Haspo English

SoccerUprights for ball catching fences 51Until now ball catching fences have mostly been made of steel Cat.-no. 6505tube. The disadvantages are well known i. e. they rust quickly. Ball catching upright,The Haspo ball catching uprights are made of special aluminium height above ground 5 mprofile 80 × 80 mm, matt silver anodised finish, so that rustformation is excluded. Cat.-no. 6506In order to meet the different requirements uprights with lengths Ball catching upright,of 4 m, 5 m and 6 m can be supplied. height above ground 6 mThe uprights are erected in ground sockets – insertion depth500 mm – and have to be concreted.Maximum distance between uprights is 5 m.Only mesh sizes of 10 cm or 12 cm can be used.Standard equipment: Matt silver anodised finish, incl. uprightcovers, eyebolts, Safety system net holders and ground socket –insertion depth 500 mmCat.-no. 6504Ball catching upright, height above ground 4 mCross arms for ball catching uprightsIn addition we can supply also cross arms of special profiles Standard equipment: Length of cross arms 4920 mm for a80 × 40 mm which should be used for ball catching fences from distance between uprights of 5000 mm, incl. all necessary20 m, i.e. between the two last uprights. connecting piecesThus it is guaranteed that the last uprights will not bend. Cat.-no. 6510Free-kick-dummy-wallwidth 2.70 m, height 1.80 mVery robust design. Completely made of solid galvanized steel Standard equipment: Complete incl. all necessary accessoriestubes, therefore optimum surface protection. Cat.-no. 197The dummies are dressed with a textile clothing which can beremoved and cleaned if necessary. The dummies are mobile andreturn to their original position after they had been hit by theball. Excellent stability due to long fixations to keep the dummieserect. Easy transportation due to steering wheels, two of whichare equipped with locking devices.Extremely variable since any of the five dummies can be easilyremoved and thus varying situations of the game can be trained.Easy assembly and disassembly, since this free-kick-dummy-wallis consisting of two lateral parts into which simply a connectingtube is put for insertion of the dummies. Those are just hungup – ready for use immediately.

Soccer52 Beach soccer goals 5.49 × 2.21 m52 These goals are equipped with the special profiles 120 /100 mm of the Haspo soccer goals and a yellow powder coating. They correspond to the construction of the goals “For insertion into ground sockets”. The only differences are the goal size and the special ground sockets. The ground sockets are simply dug in the sand. We recommend to load the net with chains in the ground area. Standard equipment: Yellow powder coated finish. Incl. net hoops and net hoop braces of aluminium tube, diameter 30 mm, Safety system net holders and special ground sockets – insertion depths 300 mm – with covers (see photo) Cat.-no. 180 Handball Beach handball goals 3×2m Goal frame of special aluminium profile 80 × 80 mm with yellow powder coated finish. Inside dimensions 3 × 2 m. Same construction as of beach soccer goals. Standard equipment: Yellow powder coated finish. Incl. net hoops and net hoop braces of aluminium tube, diameter 30 mm, Safety system net holders and special ground sockets – insertion depths 300 mm – with covers (see photo) Cat.-no. 280

HandballHandball goalswith aluminium cast corner joints, 3 × 2 mThis established handball goal systems – naturally acc. to EN 749 The stability of the complete goal construction is additionally 53and TÜV-tested – with convincing improvements and novelties. increased by the ground tubes made of galvanized steel which are screwed between the net hoops in floor area.There are no comparable aluminium goals of same stability and Top class handball goals meeting the high requirements ofstrength. modern handball.Many goal constructions with net hoops of only 30 mm alumi-nium tubes are still in the market, but they have the disadvan- Anchoring of the goals is done acc. to DIN. The net hoops aretages of lacking stability. They can bend and partly already equipped with relevant borings. For Anchoring systemseven break. please see page 57.These problems were certainly solved by using a net hoopconstruction made of galvanized steel tubes.Specially long flat-iron angles welded to the net hoops whichmust be screwed to the goal construction at crossbar/uprightarea, add additional safety to this corner area apart from thesolid mold aluminium corner joints.The upper goal depth is 1.10 m with all handball goals; the lower depth is 1.30 m.At no extra charge, goals can be delivered with goal depths (upper/lower) of 0.80 m, 0.90 m and 1 m. The Haspo German registered patent screw recess in the crossbar/upright construction problem area. 1-piece net hoops construction made of specially strong galvanized steel tubes. Ground tube made of galvanized steel Floor anchoring system to EN 749

HandballHandball goals“Transportable”, “For insertion into ground sockets”, with aluminium cast corner joints, 3 × 2 m54  these goals are also supplied with the safety screws Technical features: a construction with specially strong net hoops made of  Safety system net holdersgalvanized steel tubes  quick, simple assembly and disassembly no slip-on connections, therefore extremely stable and robust novel net hoop construction: the net hangs freely between the Standard equipment: Matt silver anodised finish with black,net hoops red or blue plastic stripes rebounding of the ball is therefore impossible extremely stable and precise-fitting cast aluminium corner joint rounded edges, thereby reduction of injury risk no damage to the gymnasium floor. Tube and upright coversprevent contact of aluminium/steel parts with the floor of thegymnasium “Transportable”, with “Rigid net hoops” Cat.-no. 2006 black/silver Cat.-no. 2007 red/silver Cat.-no. 2008 blue/silver Anchoring acc. to EN 749 and TÜV Incl. net hoops, net hoop supports and ground tubes made of galvanized steel tube, upright cover and Safety system net holdersAluminum handball goal “Transportable” “For insertion into ground sockets” with “Rigid net hoops” Cat.-no. 2016 black/silver Cat.-no. 2017 red/silver Cat.-no. 2018 blue/silver Acc. to EN 749 and TÜV Incl. net hoops, net hoop supports and ground tubes made of galvanized steel tube, upright covers, Safety system net holders and ground sockets – insertion depth 300 mm – with coversAluminum handball goal “For insertion into ground sockets”

HandballHandball goals 55“Transportable”, “For insertion into ground sockets”, with aluminium cast corner joints, 3 × 2 m “For insertion into ground sockets” Cat.-no. 2026 black/silver Cat.-no. 2027 red/silver Cat.-no. 2028 blue/silver Acc. to EN 749 and TÜV Without net hoops (net bracing on hall wall). Incl. upright sealing covers, Safety system net holders and ground sockets – insertion depth 300 mm – with covers“Transportable”, with “Folding net hoops”Cat.-no. 2056 black/silverCat.-no. 2057 red/silverCat.-no. 2058 blue/silverAcc. to EN 749 and TÜVIncl. net hoops, net hoop supports and ground tubes made of steel tube – galvanized,upright covers and Safety system net holders“For insertion into ground sockets” with “Folding net hoops”Cat.-no. 2066 black/silverCat.-no. 2067 red/silverCat.-no. 2068 blue/silverAcc. to EN 749 and TÜVIncl. net hoops, net hoop supports and ground tubes made of galvanized steel tube,upright covers, Safety system net holders and ground sockets – insertion depth300 mm – with covers“Transportable”Cat.-no. 2076 black/silverCat.-no. 2077 red/silverCat.-no. 2078 blue/silverCrossbar/upright construction only, Incl. upright covers andSafety system net holders“Additional crossbar for mini handball games”Cat.-no. 2086 black/silverCat.-no. 2087 red/silverCat.-no. 2088 blue/silverIncl. all necessary mounting materialsFor reduction in the 3 × 2 m goal size to 3 × 1.60 m (clear dimensions). The additionalcrossbar may be inserted into all available goals with just a few manipulations.The upright and additional crossbar are joined by means of stable mounting plates andhandwheels for fast fittingand removal – as easy as winking.The additional crossbar fits all our handball goal systems as standard.If other goals are involved, please indicate material and send in sketch of cross section.

Handball Handball goals “Transportable”, “For insertion into ground sockets”, with patented steel corner joints, 3 × 2 m56 Patented steel corner joints 1-piece net hoop construction made of special stable galva- nized steel tubes Galvanized steel ground tube Floor anchoring system acc. to EN 749Especially the corners of the crossbar/upright construction of Standard equipment: Matt silver anodised finish with black,handball goals heavily stressed. Therefore a stable corner joint is red or blue plastic stripesvery important so that we developed this patented corner joint.This corner joint is made of galvanized steel laser parts andguarantees stability and long durability. There is no more stablecorner joint.Another advantage is that there are no visible screwings atcrossbar/uprights, as the net hoop construction is directly screwedto the corner joints from the back through the goal profile.Apart from the corner joints these goals correspond to theconstruction of Cat.-no. 200, 201, 202, 205 and 206 and are alsoequipped with Safety system net holders.We offer handball goals of a top quality at reasonable prices.Anchoring of the freestanding goals is done acc. to EN.The net hoops are already equipped with corresponding borings.For Floor anchoring systems please see page 57.

HandballHandball goals“Transportable”, “For insertion into ground sockets”, with patented steel corner joints, 3 × 2 m Transportable” 57 with “Rigid net hoops” with “Folding net hoops” Cat.-no. 20096 black/silver Cat.-no. 20596 black/silver Cat.-no. 20097 red/silver Cat.-no. 20597 red/silver Cat.-no. 20098 blue/silver Cat.-no. 20598 blue/silver Anchoring acc. to EN 749 and TÜV Anchoring acc. to EN 749 and TÜV Incl. net hoops, net hoop braces and ground tubes made of galvanized steel tube, upright covers and Safety system net holders “For insertion into ground sockets” with “Folding net hoops” Cat.-no. 20696 black/silver with “Rigid net hoops” Cat.-no. 20697 red/silver Cat.-no. 20196 black/silver Cat.-no. 20698 blue/silver Cat.-no. 20197 red/silver Cat.-no. 20198 blue/silver Acc. to EN 749 and TÜV Acc. to EN 749 and TÜV Incl. net hoops, net hoop braces and ground tubes made of galvanized steel tube, upright covers and Safety system net holders and ground sockets – insertion depth 300 mm – with covers “For insertion into ground sockets” Cat.-no. 20296 black/silver Cat.-no. 20297 red/silver Cat.-no. 20298 blue/silver Acc. to EN 749 and TÜV without net hoops (net bracing at hall wall), incl. upright covers, Safety system net holders and ground sockets – insertion depth 300 mm – with coversAnchoring systemsfor handball goalsCat.-no. 212 Cat.-no. 213 Cat.-no. 214 Installation Set for freestanding unitsThese ground anchors were especially Installation Set for hall floors Consists of 4 floor anchors with welded-in thread and eyebolts for 1 pair of goals.developed for freestanding goals. Can be Consists of 4 admission plates and eyebolts Freestanding goals have so far generally been only temporarily mounted. Thisused for all our goals with already welded for 1 pair of goals. One hundred percent installation set – the floor anchors are concreted in – assures absolute stability ofbrackets as well as goals of other marks stable mounting. In the region of the the goals.with the appropriate brackets. Can also be mounting points on the goals, the floorused for all our goals with boreholes as well covering is removed and the admissionas goals of other marks with the plates inserted and bolted in position.appropriate boreholes. A set consists of 2galvanized steel ground anchors with innerthreads and hexagonal bolts with washers.The stability of the goal is ensured throughthe use of the ground anchors.

Handball Handball goals blue/silver58 Note: All handball goals shown are also available in blue/silver at no extra charge. Mini handball goals “Transportable”, with “Folding net hoops”, 2.40 × 1.60 m This goal is based on the construction of the handball goals of Cat.-no. 205 (page 53). The only difference is the goal size. Thus a top class goal is also available for mini handball matches. Goal depth top/bottom 1 m. Acc. to EN 16579 and TÜV in connection with the Supersafe anchoring systems of Cat.-no. 1108 or the ground anchors of Cat.-no. 211. Standard equipment: Matt silver anodised finish with black or red plastic stripes Accessories: Supersafe anchoring systems of Cat.-no. 1222/12229 (page 37), Ground anchors of Cat.-no. 211 (page 27) Cat.-no. 2156 black/silver Cat.-no. 2157 red/silver

HockeyOutdoor hockey goalsall aluminium, acc.to EN 750, 3.66 × 2.14 mTechnical features: Crossbar/upright construction – complying Acc. to EN 750 and TÜV in connection with the ground anchors 59with international regulations – of especially thick walled of Cat.-no. 211aluminium profiles 75 × 50 mm with groove for Safety systemnet holders. Standard equipment: White powder coated finish for crossbar/Stable net hoops made of 40 mm diameter aluminium tubes. upright construction. Dimensions acc. to international regula-Welded base frame structure of solid aluminium U and angle tions (inside dimensions 3.66 × 2.14 m), incl. net hoops, groundprofiles into which the boards may be inserted and thus removed frame, barriers and Safety system net holders.at any time.Barriers are of special stable hollow chamber barrier profiles. Cat.-no. 300The hollow chambers are additionally filled with wood cores.Quick, simple assembly. Cat.-no. 3001There are 4 attachment straps welded to the base frame for Transportation rollers for Outdoor Hockey goalsattachment. (for 1 pair of goals)If the Transportation rollers are used the goals can easily bepushed at every place you want. Cat.-no. 3002 Barrier stuffing of 10 mm “Regupol-black” (for 1 pair of goals)Barrier stuffing of 10 mm “Regupol-black” can be deliveredagainst additional cost. Accessories: Ground anchors of Cat.-no. 211 (page 27) 75 50 Crossbar/uprights

Tennis Cat.-no.: 500 Tennis uprights square Tennis uprights with ground sockets square and round, Ground sockets for for outdoor and indoor courts acc. to EN 1510 Cat.-no. 500 We offer Haspo tennis uprights in square profile 80 × 80 mm Cat.-no.: 502 or round profile of 83 mm diameter. Tennis uprights round All square uprights can be supplied with insertion elements. They enable to replace uprights without changing the concreted Cat.-no.: 501 round ground sockets. Thus foundation operations and conse- Tennis uprights square “For quently damages to the court surface are eliminated. existing round ground sockets”:60 Technical features:  functional and elegant design  extremely stable as they are provided with a special aluminium alloy and thick-walled profiles  internal tensioning unit which is concealed and protected against the elements  quick and easy tensioning and release of net by use of a special spindle  no rolling of net rope so that a long net rope life is guaranteed  detachable crank kept in the top of the upright, therefore it is always ready to hand, no searching  with aluminium net holding rods and rust-resistant mounting hooks  cast aluminium and rope guide covers The round uprights are additionally equipped with a double groove so that the rope hook at the opposite upright can be adjusted continuously variable. Thus different rope lengths can easily be compensated. Tennis uprights square and round with ground sockets: Matt silver anodised finish or white respectively green powder coated against additional cost (see price list). Incl. aluminium net holding rods and rust-resistant mounting hooks, special stable ground sockets – insertion depth 350 mm – with covers. Cat.-no. 500 Cat.-no. 502 Tennis uprights square “For existing round ground sockets”: Matt silver anodised finish – insertion depth 225 mm. The special insertion elements are supplied with stud diameters of 60 mm, 76 mm or 80 mm. Cat.-no. 501

TennisTennis unit“Transportable”Technical features: A novel idea pioneered in the USA and Standard equipment: Matt silver anodised finish incl. allreshaped by ourselves to match European conditions. accessoriesWith this tennis unit, it is possible to play tennis anywhere there Cat.-no. 503 61is no tennis court or floor sockets are neither available nor can befitted. Cat.-no. 5031 Additional weight to improve stability under special high loadingA unit specially created for school and broad-based sporting (4 weights each of around 5 kg)activity, but also for additional installation in gymnasia to createfurther playing areas without major expense. Cat.-no. 5032 Aluminium tennis net support for “Transportable” tennis unitWith all the advantages of tennis uprights, Cat.-no. 500.This unit is used e. g. at WTA Tournaments, Swiss Indoorand Davis Cup Tournaments.Special design features: folding net uprights and feet split floor support assure extremeley space-saving storage easy assembly and disassemblyLow weight, which is especially advantageous for school games.

Tennis Tennis unit for children “Transportable” Only with this tennis unit “Transportable” a specific built-up The net – net size 6 × 0.80 m – is fastened with the net holding training is possible which is at the same time fun for the children rods between the posts. At the outside of the posts a quick- since training without fun is quickly given up by children and then acting clamping device is mounted into which the rope is simply important young talents are suspended and tensioned. missing. Therefore learning to play tennis quite easily with this tennis unit “Transportable”. Standard equipment: Matt silver anodized finish incl. net and all accessories The tennis unit is set up such that one normal tennis court is62 divided into two children tennis courts. Thus the limited courts Cat.-no. 507 can be used optimally. It is not necessary to take away posts and nets of the standard court. Due to the well-devised construction – slip-on posts/base construction and ground tubes in 2 pieces – therefore transportation length only 3 m – and the low weight, this tennis unit can be stored space-saving and is ready for use in no time. Technical features: Posts with welded-on feet made of specially strong aluminium special profiles 80 × 40 mm The round divisible ground tube of aluminium 60 × 2.5 mm is simply slipped on to the welded-on pivot of the posts/base construction and locked with the net holding rods. Tennis accessories Tennis net supports For setting the regulation net height for individual games. Fork-shaped rounded net support to prevent net damage. High stability thanks to well-dimensioned disc feet. Standard equipment: Natural bright aluminium finish Cat.-no. 504 Ground anchoring socket For receipt of web turnbuckle. Made of thick-walled aluminium tubing, total length 250 mm, with cover and recessed hook. Standard equipment: Natural bright aluminium finish, with cover Cat.-no. 5094

TennisUmpire’s chair 63“Folding”The umpire’s chair matched to the most stringent requirements –there is no better. A proven construction which has thoroughly stood the test of time – both at home and abroad.These facts speak for themselves, though a number of technical features should be highlighted:Extremely stable, steady and elegant design. Maintenance-free –assured by aluminium finish. “Folding” feature providedthrough application of special hinges between seat and support.Space-saving storage is thereby assured. Ladder part with especially wide and non-slip steps. Matching spars are also made of wide special profiles.Stability assured by disc feet. Through bores in the disc feet,additional anchoring of the chair by ground pegs is possible. Fatigue-free and comfortable sitting posture by application of a UV-resistant perforated moulded seat plastics of correctanatomical design.Wide writing board of weatherproof plastics. Low freight costs, since the unit is packaged in two cartons. Standard equipment: Natural bright aluminium finish. Incl. UV-resistant, perforated plastic moulded seat, writing board, string bag, disc feet, and 2 clothes hooks.Cat.-no. 505Tennis bench Stable and elegant construction with all-aluminium subframe. Especially steady due to high weight and disc feet. Dimensions: Length: 2 m Width: 0.37 m Height: 0.46 m Technical features: All-aluminium subframe – 3 piece with additional crossbracing and disc feet. Seat bars – 3 lengths of white plastics hollow-chamber profiles with galvanized steel profile inserts and end caps. Standard equipment: Natural bright aluminium finish Cat.-no. 506

Volleyball Volleyball uprights acc. to EN 1271 and DVV-Norm I, with spindle tensioning device There are already volleyball uprights of a top quality but at high prices. Thus only a few customers are able to afford them. To satisfy the demand for extremely stable uprights at reasonable prices with all requirements of modern equipment and provided with the label DVV I of the German Volleyball Associoation we developed this product.  volleyball uprights with tensioning/holding device completely sunk-in upright  extremely stable and this without additional reinforcement of steel at the inside  low risk of deflexion due to special thick-walled profiles  infinitely variable net height adjustment from 1.55 to 2.50 m, single-part clamping/ holder device  to be supplied in square execution 80 × 80 and round 83 mm diameter  on demand both executions can be supplied with insertion elements for existing round64 ground sockets The high quality and safety standard of these uprights is certified by the label of the DVV. Technical features: Functional and elegant design with built-in chambers for covered receipt of tensioning and holding device. Even if the net is fully tensioned, a continuous variable net height adjustment for heights from 1.55 to 2.50 m is possible.  extremely stable due to special thickwalled profiles, very low risk of deflexion  quick assembly and disassembly  quick, easy tensioning and release of net due to a special spindle  no rolling up of net rope, thus long durability of net and rope  simple infinitely variable height adjustment of the net with one hand by means of a removable crank Standard equipment: Matt silver anodised finish Also available with yellow powder coating. Additional price see price list. * The special insertion elements are regularly supplied with tube sockets of 60, 76 or 80 mm. Cat.-no. 531 Volleyball uprights square 80 × 80 mm Incl. rustproof net hooks, ground sockets – insertion depth 350 mm – with covers Cat.-no. 5311 Volleyball uprights square 80 × 80 mm “For existing round ground sockets” Incl. rustproof net hooks and special insertion elements – insertion depth 225 mm* Cat.-no. 532 Volleyball uprights round 83 mm diameter Incl. rustproof net hook, ground sockets – insertion depth 350 mm – with covers Cat.-no. 5321 Volleyball uprights round 83 mm diameter “For existing round ground sockets” Incl. rustproof net hooks and special insertion elements – insertion depth 225 mm* Insertion elements

VolleyballVolleyball uprights Cat.-no. 514 65 Volleyball uprights – 83 mm diameter acc. to EN 1271 and DVV-Norm II, with spindle tensioning device Incl. rustproof net hooks, ground sockets – insertion depth 350 mm – with coversThese Volleyball uprights correspond to the uprights DVV I described on page 64 and are only different in net height Cat.-no. 5141 adjustment which is only possible when the net is slightly Volleyball uprights – round 83 mm released. The tensioning/holding device comes in two parts. diameter “For existing round ground sockets” Standard equipment: Matt silver anodised finish Incl. rustproof net hooks and specialAlso available with yellow powder coating. Additional price see insertion elements –insertion depth price list. 225 mm* * The special insertion elements are regularly supplied with tube Volleyball uprights with insertion elements do not have labels of the DVV. sockets of 60, 76 or 80 mm. Cat.-no. 5151 Cat.-no. 513 Volleyball uprights – square 80 × 80 mm Volleyball uprights – square 80 × 80 mm “For existing round ground sockets” Incl. rustproof net hooks, ground sockets – insertion depth Incl. rustproof net hooks and special350 mm – with covers insertion elements – insertion depth 225 mm* Cat.-no. 5131 Volleyball uprights – square 80 × 80 mm Cat.-no. 516“For existing round ground sockets” Vollyball uprights – round 83 mm diameter Incl. rustproof net hooks and special insertion elements – Incl. rustproof net hooks, ground sockets – insertion depth 225 mm* insertion depth 350 mm – with covers Volleyball uprights with insertion elements do not have labels of the DVV. Cat.-no. 5161 Volleyball uprights – round 83 mm diameterVolleyball uprights “For existing round ground sockets” Incl. rustproof net hooks and special acc. to EN 1271, with spindle tensioning device insertion elements –insertion depth 225 mm*To satisfy different demands, we developed this cheaper alternative to the uprights DVV I resp. DVV II. Regarding material, the uprights correspond exactly to those of the execution DVV I/DVV II but this system consists of a one-part tensioning and holding device.The result is a cheap solution without renouncing stability and low risk of deflexion. Technical features: Same construction as uprights DVV I/DVV II but: 1-part tensioning and holding device. Standard equipment: Matt silver anodised finishAlso available with yellow powder coating. Additional price see price list. * The special insertion elements are regularly supplied with tube sockets of 60, 76 or 80 mm. Cat.-no. 515 Volleyball uprights – square 80 × 80 mm Incl. rustproof net hooks, ground sockets – insertion depth 350 mm – with covers

Volleyball Volleyball uprights “Standard” acc. to EN 1271, with spindle tensioning device These uprights “Standard” have proved during the past years and were successfully in the market. Instead of steel uprights which sometimes are still used you can better use these uprights equipped with many advantages of aluminium. Due to the special aluminium alloy and thick-walled profiles they are very stable. Standard equipment: Matt silver anodised finish Cat.-no. 510 Volleyball uprights – square 80 × 80 mm66 Incl. rustproof net hooks, ground sockets – insertion depth 350 mm – with covers Cat.-no. 512 Volleyball uprights – round 83 mm diameter Incl. rustproof net hooks, ground sockets – insertion depth 350 mm – with covers Volleyball uprights central uprights for multiple courts, with spindle tensioning device Technical features: Multiple courts are the ideal solution to the space problem for practice games. The central upright has been designed for this purpose, combining the same technical features as the volleyball uprights of Cat.-no. 510 and 512. The built-in opposite guide-rails for receipt of tensioning and holding devices ensures that the nets may be steplessly and independently set to the required heights at both upright sides. Standard equipment: Matt silver anodised finish. Incl. rust-resistant net hooks, ground sockets – insertion depth 350 mm – with covers and one tensioning and one retaining device. Cat.-no. 5101 Central upright for multiple courts square – 80 × 80 mm Cat.-no. 5121 Central upright for multiple courts round – 83 mm diameter

VolleyballVolleyball uprightsacc. to EN 1271 and DVV-Norm I, with pulley tensioning deviceThese uprights with pulley are a consequent development of the Cat.-no. 5312uprights with tension machanism/crank. Volleyball uprights – square 80 × 80 mm,The special profiles of these uprights are identical with those “For insertion into ground sockets”being used until now.Instead of the tension mechanism with crank we installed a pulley Cat.-no. 53112system, which guarantees an easy and quick tensioning of the net Volleyball uprights – square 80 × 80 mm,even up to a net tension of 150 kg without being effort. “For existing round ground sockets”There are no problems with damaged joints or cranks. Volleyball uprights with insertion elements do not have labels of the DVV.Standard equipment: Matt silver anodised finish Cat.-no. 5322Also available with yellow powder coating (see price list).* The special insertion elements are regularly supplied with Volleyball uprights – round 83 mm diameter,tube sockets of 60, 76 or 80 mm “For insertion into ground sockets” 67Volleyball uprights “For insertion into ground sockets” Cat.-no. 53212Incl. rustproof net hooks, ground sockets – insertaion depth Volleyball uprights – round 83 mm diameter,350 mm – with covers “For existing round ground sockets” Volleyball uprights with insertion elementsVolleyball uprights “For existing round ground sockets” do not have labels of the DVV.Incl. rustproof net hooks and special insertion elements –insertaion depth 225 mmacc. to EN 1271 and DVV-Norm II, with pulley tensioning deviceStandard equipment: Matt silver anodised finish. Cat.-no. 5142Also avaliable with yellow powder coating (see price list). Volleyball uprights – round 83 mm diameter,* The special insertion elements are regularly supplied with tube “For insertion into ground sockets” sockets of 60, 76 or 80 mm Cat.-no. 51412 Volleyball uprights – round 83 mm diameter,Cat.-no. 5132 “For existing round ground sockets”Volleyball uprights – square 80 × 80 mm, Volleyball uprights with insertion elements“For insertion into ground sockets” do not have labels of the DVV.Cat.-no. 51312Volleyball uprights – square 80 × 80 mm,“For existing round ground sockets”Volleyball uprights with insertion elementsdo not have labels of the DVV. acc. to EN 1271, with pulley tensioning device Cat.-no. 51512 Volleyball uprights – square 80 × 80 mm, Standard equipment: Matt silver anodised finish “For existing round ground sockets”Also avaliable with yellow powder coating (see price list). * The special insertion elements are regularly supplied with Cat.-no. 5162 tube sockets of 60, 76 or 80 mm Volleyball uprights – round 83 mm diameter, “For insertion into ground sockets” Cat.-no. 5152 Volleyball uprights – square 80 × 80 mm, Cat.-no. 51612“For insertion into ground sockets” Volleyball uprights – round 83 mm diameter, “For existing round ground sockets”

Volleyball * Volleyball uprights “Standard” acc. to EN 1271*, with pulley tensioning device Cat.-no. 5102* Volleyball uprights – square 80 × 80 mm, “For insertion into ground sockets” Cat.-no. 51012 central uprights for multiple courts – square 80 × 80 mm, “For insertion into ground socket” Cat.-no. 5122* Volleyball uprights – round 83 mm diameter, “For insertion into ground sockets” Cat.-no. 51212 central uprights for multiple courts – round 83 mm diameter, “For insertion into ground68 socket” Protection cushions for volleyball uprights and basketball units For security: Protection cushions for volleyball uprights and also suitable for basketball units. Made of polyethylene foam, foil at the outside resistant to tearing, with adhesive tapes. Cushions’ length 2 m in orange. Cat.-no. 5172 For square uprights 80 × 80 mm Cat.-no. 5173 For round uprights 83 mm Volleyball podium This podium was specially constructed for volleyball and is taking into consideration all requirements requested by the referees.  extremely strong, stable and stylish construction made of aluminium  easy adjustment of podium height by simply adjusting the platform – three different heights are possible  especially stable due to floor-protecting rubber feet and two collars linking the podium firmly to the uprights  easy transportation by means of sensibly mounted wheels  low weight  incl. a writing board made of plastic  suitable for all uprights Standard equipment: Natural bright aluminium finish, complete with writing board and all necessary accessories Cat.-no. 5301

VolleyballBeach volleyball competition unit *acc. to EN 1271 and DVV Beach 2, with pulley tensioning deviceWe developed the beach volleyball competition unit Beach 2 Cat.-no. 51942*to meet the particularly high demands of the sport. Beach volleyball competition unit Beach 2, square 80 × 80 mm, length of upright above ground 2650 mm, without groundThe uprights for this system are made of extremely stable alumi- sockets, yellow powder coated finish (see detail photo 2)nium special profiles 80 × 80 mm and have the same constructionas the volleyball uprights in Cat.-no. 5132 TÜV in connection with the Special ground sockets of Cat.-no.(page 67). 5192.The pulley tensioning device guarantees a quick tensioning and Cat.-no. 5191 69release of the net and ensures a continuously adjustable net Special ground sockets of galvanized steel, inclined execution,height. to be fastened on concrete foundation, length of ground socket 360 mm – insertion depth 350 mm – with coverThis system complies with TÜV and DVV. It has received the label (see detail photo 3)of DVV Beach 2. Cat.-no. 5192Cat.-no. 5193* Special ground sockets of galvanized steel to be set in concrete,Beach volleyball competition unit Beach 2, square 80 × 80 mm, length of ground socket 700 mm – insertion depth 350 mm, withlength of upright above ground 2650 mm, without ground cover (see detail photo 4)sockets, matt silver anodised finish (see detail photo 1)TÜV in connection with the Special ground sockets of Cat.-no.5192.[1] [2] [4] [3]

Volleyball *Beach volleyball competition unitwith spindle tensioning device70 [4][1] [2] [3]For many years these volleyball uprights round, 83 mm diameter Cat.-no. 5184*of series “Standard” have been well known and in connection Length of upright above ground 2650 mm, without groundwith the special ground sockets they are a real alternative – even sockets, yellow powder coated finish (see detail photo 2)considering the price – to the “simple uprights”. TÜV in connection with the Special ground sockets of Cat.-no.Cat.-no. 518* 5182.Length of upright above ground 2650 mm, without groundsockets, matt silver anodised finish (see detail photo 1) Cat.-no. 5181 Special ground sockets made of galvanized steel, inclinedTÜV in connection with the Special ground sockets of Cat.-no. execution “to be fastened on concrete foundation”, length of5182. ground socket 360 mm – insertion depth 350 mm – with cover (see detail photo 3) Cat.-no. 5182 Special ground socket made of galvanized steel, “to be set in concrete”, length of ground socket 700 mm – insertion depth 350 mm – with covers (see detail photo 4)Beach volleyball competition unitwith pulley tensioning deviceThis uprights are the same as of Cat.-no. 518/5184. Cat.-no. 51842The only difference is the tensioning device. Volleyball uprights – round 83 mm diameter, yellow powder coated finishCat.-no. 5183Volleyball uprights – round 83 mm diameter, anodised finish TÜV in connection with the Special ground sockets of Cat.-no. 5182.TÜV in connection with the Special ground sockets of Cat.-no.5182.

Universal uprights Multi-functional uprights 71Uprights with special profiles of volleyball uprights 80 × 80 mmresp. 83 mm diameter – round, Cat- no. 510/512 (page 66)which can be used for each kind of game. Length of upright2650 mm above ground. Easy net height adjustment by slidingunits with handwheel.Cat.-no. 521Uprights – square 80 × 80 mmIncl. 2 sliding units with handwheel, ground sockets –insertion depth 350 mm – with coversCat.-no. 522Uprights – round 83 mm diameterIncl. 2 sliding units with handwheel, ground sockets –insertion depth 350 mm – with coversCat.-no. 5211Central uprights – square 80 × 80 mmIncl. 4 sliding units with handwheel, ground sockets –insertion depth 350 mm – with coversCat.-no. 5221Central uprights – round 83 mm diameterIncl. 4 sliding units with handwheel, ground sockets –insertion depth 350 mm – with coversMulti-functional uprightsA system of uprights of special profiles of volleyball uprights Standard equipment: Matt silver anodised finish,square 80 × 80 mm of resp. 83 mm – round, Cat.-no. 510/512 incl. ground sockets – insertion depth 350 mm – with covers(page 66). Cat.-no. 541Simple net height adjustment. Due to the special construction of Multi-functional uprights, square 80 × 80 mmthe tensioning device (operation with crank) these uprights canbe used for volleyball, tennis matches and of course for soccer- Cat.-no. 542tennis for training and leisure time purposes. Multi-functional uprights, round 83 mm diameter

Basketball Basketball unit acc. to EN 1270, single-upright construction Technical features: Rugged, functional single upright construction made of 90 × 5 mm special aluminium alloy tubing. Through a bracing additionally arranged on the tubes and a reinforcd base to prevent bending of the upright, especially steady and torsion resistant performance is assured. To prevent unit distorsion, the ground sockets – total length 600 mm, insertion depth 450 mm – are provided with a cross-pin. Appropriate slots are available at the upright end.  Special wedges prevent wavering of uprights in the ground sockets. Additional cross beams from back board fixing to upright acc. to CEN-Norm  stable rear structure as back board mounting made of thick- walled aluminium profiles. Additional bracing of back board mounting to upright  glass-fibre back board – measuring 180 × 105 cm – absolutely weather-proof, scratch- and impact-resistant finish Standard equipment: Natural bright aluminium finish Complete unit: Cat.-no. 700 basket height 3050 mm TÜV in connection with the Protection cushions of Cat.-no. 5173.72 Total overhang 1650 mm Cat.-no. 701 basket height 3050 mm TÜV in connection with the Protection cushions of Cat.-no. 5173. Total overhang 2250 mm Incl. back board mounting glass-fibre back boards with basket coloured orange, nets coloured white, all bracing, ground sockets – insertion depth 350 mm – with cover and special wedges Unit without back boards, baskets, and nets: Cat.-no. 7001 Total overhang 1650 mm Cat.-no. 7011 Total overhang 2250 mm Incl. back board mountings, all bracings, ground sockets – insertion depth 450 mm – with cover and special wedges Basketball back boards of steel grating Basketball back boards of steel grating, completely welded and galvanized, for sizes of 180 × 105 cm and 120 × 90 cm. For all basketball units with back boards of 180 × 105 cm, Cat.-no. 700, 701 and 704 and for basketball units with back boards of 120 × 90 cm, Cat.-no. 703 or as retrofit kit for existing units. Due to the small impact area of the ball it is very silent and therefore recommended for the use in residential areas. These boards are safe from vandalism. Cat.-no. 7071 Size 180 × 105 cm Cat.-no. 7072 Size 120 × 90 cm

Basketball practice unit Basketball 73acc. to EN 1270Technical features: Equipment specially developed for practicepurposes and chiefly used in school yards, playgrounds, andopen-air swimming pools. This equipment is also made ofespesially thick-walled special aluminium alloy 80 × 80 mm sqareprofiles and is therefore extremely stable – and the basket heightmeets competition requirements. special wedges prevent equipment wavering in especially stable ground sockets the back boards are mounted on a solid aluminium rear structure fitted directly to the upright easy and quick assembly glass-fibre back boards measuring 120 × 90 cm – absolutely weatherproof. Scratch- and impact-resistant finishStandard equipment: Natural bright aluminium finishComplete unit:Cat.-no. 703 basket height 3050 mmTÜV in combination with the protective cushions of Cat.-no. 5172Incl. back board mountings, glass-fibre back boards with basketscoloured orange, net coloured white, ground sockets – insertiondepth 500 mm – with cover and special wedgesUnit without back boards, baskets, and nets:Cat.-no. 7031Incl. back board mountings, ground sockets – insertion depth500 mm – with covers and special wedgesStreet basketball unitacc. to EN 1270This is a real alternative to the basketball practice unit of Cat.-no.703 even considering the price.The new back boards, also made of glass-fibre, together with theupright forming a knee give the unit an up-to-date design.The upright is also made of special thick-walled aluminium squareprofiles 80 × 80 mm. This construction, however, is forming aknee and therefore has a total overhang of 650 mm.The connection from basket to back board construction is executeacc. to CEN-Norm. The basket height meets competitionrequirements. Special wedges prevent the equipment wavering inspecial stable ground sockets.Easy and quick assembly. Glass fibre back boards of 100 × 75 cm,absolutely weatherproof, scratch- and impact-resistant finish.Standard equipment: Natural bright aluminium finish.Incl. back board mountings, back boards of glass-fibre withbaskets coloured orange and nets coloured white, groundsockets – insertion depth 500 mm – with covers and specialwedgesCat.-no. 705 basket height 3050 mmTÜV in connection with the Protection cushions of Cat.-no. 5172.Cat.-no. 7051 basket height 2600 mmTÜV in connection with the Protection cushions of Cat.-no. 5172.

Basketball Basketball unit “Mobile” Technical features: At last a steady all-aluminium “Mobile unit” Unit without back boards, baskets and nets: which meets competition requirements. Absolutely maintenance- Cat.-no. 7041 free.Extremely stable construction due to special system profiles. Total overhang 1650 mm, incl. all necessary accessories, safety Side frames and boom are supplied as complete welded structures, hoops for counterweights, but without counterweights. whereby a special joint system assures simple assembly. Plus enormous freight cost savings compared with one-piece units. The connection from basket to back board construction is execute acc. to CEN-Norm. Complete Unit: Cat.-no. 704 Total overhang 1650 mm, incl. all necessary accessories, glass-fibre back boards with baskets coloured orange and nets coloured white, safety hoops for counterweights, but without counterweights. Three rollers are fitted to each unit. The unit stands on two rear support rollers and two front feet. The height of the front jockey roller can be adjusted as required. Counterweights are necessary, i. e. totally 8 weights 1 × 0.25 × 0.05 m with 25 kg each. An appropriate holder is built in for this purpose. To prevent the counterweights from being stolen, safety hoops are provided.74 Glas-fibre back boards – measuring 180 × 105 cm – absolutely weatherproof, scratch- and impact-resitant finish. Standard equipment: Natural bright aluminium finish. Basketball basketsBasket acc. to FIBA standard, special strong Basket acc. to CEN standard, special strong Basket acc. to DIN standard, with chainexecution, with suspended folding execution, with 12-point suspension, net, strong execution,mechanism. During “Dunking” the basket without net. galvanized, 8-point suspension.tips down for 15 degrees at approx.1050 N, 12-point suspension, without net.Cat.-no. 7061 Cat.-no. 7062 Cat.-no. 7063

AthleticsSpecial ground sockets with cover which can be enamelledfor playgrounds with synthetic or artificial lawn surfacesThese special ground sockets “with cover pocket” were especially Cat.-no. 5011developed for playgrounds with synthetic or artifical lawn for tennis uprights of Cat.-no. 500, volleyball uprights of Cat.-no.surfaces. 513, 515, 510 5101 and 531, uprights of Cat.-no. 521, 5211 andIn the cover frame, which is fixed at the ground socket, a pocket 541, as well as for badminton uprights of Cat.-no. 520 and 550 –is embedded. The cover is inserted in this pocket that there is no insertion depth 350 mmrisk of injury by covers lying around. Theft of the cover isimpossible as it is fixed to the cover frame by a chain. Cat.-no. 5021The cover is formed like a “trough” and is let-in flush to the for tennis uprights of Cat.-no. 502, volleyball uprights of Cat.-no.cover frame. The synthetic or artifical lawn coating is then 514, 516, 512, 5121 and 532, as well as for uprights of Cat.-no.attached to this “trough cover”. 522, 5221, 542 and badminton uprights Cat.-no. 552 – insertion depth 350 mmStandard equipment: As ground socket ready to be installed(without synthetic or artificial lawn surface) Cat.-no. 7111 for basketball units of Cat.-no. 700, 7001, 701 and 7011 –Cat.-no. 1111 insertion depth 450 mmfor soccer goals of Cat.-no. 98, 981, 99, 100, 1001, 101 and102, junior soccer/small pitch goals of Cat.-no. 1301, 1302 and Cat.-no. 61111501 – insertion depth 500 mm for rugby/soccer goals of Cat.-no. 600 and 6001 – insertion depth 800 mmCat.-no. 1311for junior soccer/small pitch goals of Cat.-no. 130 and 150,basketball units of Cat.-no. 703, 7031, 705 and 7051 –insertion depth 500 mmCat.-no. 2111 75for handball goals of Cat.-no. 201, 202 and 206 –insertion depth 300 mmBuilt-in troughsfor long and triple-jump pitsAt last a technically refined built-in trough system conferring Cat.-no. 610the decisive advantages of aluminium: For 34 cm take-off board guaranteed corrosion-free. Therefore absolutely Cat.-no. 6101 maintenance-free For 20 cm take-off boardThe structure is braced with wooden spacers additionally Cat.-no. 6102prefitted by the manufacturer to exclude distortion during For 30 cm take-off boardinstallation, providing sufficient care is taken.Secure retention of the built-in troughs is assured by groundanchors provided at the side which are simply bent downwards.Installation of these absolutely true-tosize built-in troughsensures that the take-off board can be easily removed and storedfor protection in the equipment room.Standard equipment: Natural bright aluminium finish.Incl. two wooden spacers

Water polo/SwimmingWater polo goals“Free floating”, Type “Super Goal”, 3 × 0.90 mTechnical features: This kind of goal is a construction of a To guarantee a steady location in the water weights are providedmodern design. in the back part of the float construction.The floats are made of stable aluminium parts and delivered in onepiece. The lateral floats comprise the special foam material for the Of course two-point line attachments are mounted at the floatsupwelling of the goals. acc. to international regulations.76 Round corners in the back part of the float construction reduce The net is fixed at the crossbar/upright construction with thethe danger of being injured. Safety system net holders invisible below the floats.The crossbar/upright construction is made of aluminium special Standard equipment: Floats of matt silver anodised finish,profile 75 × 40 mm, white powder coated, net hoops of stable crossbar/upright construction white powder coatedaluminium tubes of 40 mm diameter. Cat.-no. 402Mounting is very simple as due to the special construction onlycrossbar/upright construction and net hoops have to be mounted Cat.-no. 403to the floats. Suitable special nets, 4 mm, whiteTransportation rollersfor water polo goals, Type “Super-Goal” Cat.-no. 404 The rollers are laterally screwed below the floaters and remain there permanently. 1 set comprises 8 rollers (for 1 pair of goals of the Cat.-no. 402).

Water polo/SwimmingWater polo goals“Free floating”, folding, 3 × 0.90 mThe major improvement: Cat.-no. 400With just a minimum of effort – without expensive dismantling – Incl. net hoops, counterweights and Safety system net holdersthe floats with net hoops are simply clipped on to the crossbar/upright structure. Cat.-no. 401 Suitable special nets, 4 mm, green, incl. tensioning cords folding stable structure with rigid joints. All components are able to operate independently of each other so that no design-dependent fractures can occur unsinkable due to foam-filled floats with slanted front quick, extremely simple counter-balancing carry out just once, and then forget about it two-point line attachment to the special floats steady location in water free hanging net – thus no undesirable hoops in the centre of the goal screw-in rust-resistant net hooks powder coated quick, easy assembly and disassembly compact storage – passes through the smallest doorwayAlready at the 1980 Olympic Games in Moscow, these Haspowater polo goals were used to the fullest satisfaction of organizersand players alike.Standard equipment: White powder coated crossbar/uprightstructure 77Pool official’s chair“Folding”The pool official’s chair matched to the most stringent Standard equipment: Natural bright aluminium finish.requirements – there is no better. A proven construction which Incl. UV-resistant, perforated plastic moulded seat, writing board,has thoroughly stood the test of time – both at home and string bag, disc feet, and 2 clothes hooks.abroad. Cat.-no. 505These facts speak for themselves, though a number oftechnical features should be highlighted:Extremely stable, steady and elegant design. Maintenance-free –assured by aluminium finish. “Folding” feature providedthrough application of special hinges between seat and support.Space-saving storage is thereby assured.Ladder part with especially wide and non-slip steps. Matchingspars are also made of wide special profiles.Stability assured by disc feet. Through bores in the disc feet,additional anchoring of the chair by ground pegs is possible.Fatigue-free and comfortable sitting posture by applicationof a UV-resistant perforated moulded seat plastics of correctanatomical design.Wide writing board of weatherproof plastics.Low freight costs, since the unit is packaged in two cartons.

Water polo/SwimmingWater polo goals“Pool edge fastening”, folding, 3 × 0.90 m Technical features: These water polo goals – “Pool edge Cat.-no. 411 fastening” type – have been designed in the same manner as the Suitable special nets, 4 mm, green, incl. tensioning cords“Free floating” version – but without the floats. This system thus also features the same decisive advantages. Owing to different water depths, these goals may also, of course,A special anchoring system enables the goals to be attached to be supplied in other sizes at additional cost. any pool edge no matter what the design of channel. Standard equipment: White powder coated crossbar/ vertical upright structures. When ordering, it is essential to state: adjustment 1. pool edge system and distance from top of the pool edge to78 water level horizontal 2. distance of pool edge to centre of sockets adjustment 3. inside diameter of sockets hinge Cat.-no. 410 rubber Incl. net hoops, pool edge fastening set for 42 mm inside diameter cushion sockets (without sockets) and Safety system net holders anchoring systemGround socketfor water polo goals, type “Pool edge fastening”Technical features: Made of thick-walled aluminium tubing, totallength 100 mm, with welded-on bottom plate and recessed capStandard equipment: Natural bright aluminium finish,inside diameter 42 mmCat.-no. 412

Equipment trolley “Maxi” Water polo/Swimming 79The inserted trays can easily be adjusted by a special rail system.Mounting is simple by use of a new frame profile of80 × 40 mm.Technical features: Wherever small items need frequenttransportation, this equipment trolley is indispensable and hasproven an ideal unit for swimming pools, schools, clubs and alsoin sports halls.All items are immediately and clearly to hand at the pool edge.No more time wasted in searching and gathering together floatingboards, pull-buoys, diving rings, etc.Space-saving arrangement of all equipment – even the smallestitems no longer get lost.Schools and clubs have “their own” trolley. It can be closed by ausual lock (not included).This equipment trolley is designed so that all the usual items canbe accommodated.Dimensions:Length:1.50 mWidth: 0.62 mHeight: 1.48 mThis dimensions also allow storage in the smallest equipmentrooms.Extremely stable and elegant design due to special system profiles.Top and bottom, doors, side frames, rear wall, and all insertedtrays are supplied as a complete welded structure, whereby aspecial joint system assures simple assembly.The crimped aluminium grilles provided around the unit and forthe inserted trays ensure optimum water drainage and drying ofequipment. Trackless and smooth-running wheels matched toswimming pool requirements allow rapid transport.Standard equipment: Natural bright aluminium finishCat.-no. 430Equipment cabinet “Maxi”This equipment cabinet has been designed in the same manner asthe equipment trolley of Cat.-no. 430.This cabinet also confers the same decisive advantages of materialand design.Fitted with feet instead of wheels.Standard equipment: Natural bright aluminium finishCat.-no. 431

Water polo/Swimming Equipment trolley “Mini” It is a advancement being of the same construction as the trolley shown on page 79, however, smaller and with 2 inserted trays which are easily adjustable by a special rail system. Dimensions: Length:1.25 m Width: 0.62 m Height: 1.25 m Standard equipment: Natural bright aluminium finish Cat.-no. 429 Storage trolley for swimming lane lines Type 1 with reel lock Now equipped with a reel lock so that the swimming lanes cannot unwind by themselves. Delivery of two dimensions so that it can be used for all reel types. Technical features: In addition to its dismantability, this reel is distinguished by absolute freedom from maintenance and ensures minimum wear of expensive lane lines. Easy unrolling of the lines is ensured even when fully loaded. Trackless and smooth-running wheels matched to pool requirements, 2 of them steerable and provided with brakes,80 assure rapid transport. Standard equipment: Natural bright aluminium finish, incl. all individual components, but without lane lines. Maxi: Dimensions: Length: 2.45 m, Width: 1.18 m, Height: 1.50 m, diameter of reels 1.15 m, space for 6 special lane lines – 150 mm diameter – of 25 m each, 12 special lane lines – 100 mm diameter – of 25 m each or about 24 lane lines of 25 m each with floats Cat.-no. 4201 Mini: Dimensions: Length: 1.78 m, Width: 1.18 m, Height 1.37 m, diameter of reels 1.15 m, space for 3 special lane lines – 150 mm diameter – of 25 m each, 6 special lane lines – 100 mm diameter – of 25 m each or about 12 lane lines of 25 m each with floats Cat.-no. 420

Water polo/SwimmingStorage trolley for swimming lane lines Type 2 81with reel lockNow equipped with a reel lock so that the swimming lanescannot unwind by themselves.Technical features: Due to the positive experiences with theoriginal Haspo storage trolley for swimming lane lines of Cat.-no.420 (page 80) we developed this type. Two different sizes can bedelivered. Also this trolley needs no maintenance. Trackless andsmooth-running wheels assure an easy transport from one placeto the other. Easy unrolling of the lane lines is ensured even iffully loaded. The trolley is dismantled and can be easily andquickly mounted.Standard equipment: Natural bright aluminium finish, incl. allindividual components, but without lane linesMaxi:Dimensions: Length: 1.40 m, Width: 1.40 m, Height: 1.35 m,diameter of reels 1.15 m,space for 2 special lane lines – 150 mm diameter – of 25 m each,4 special lane lines – 100 mm diameter – of 25 m each or about8 lane lines of 25 m each with floatsCat.-no. 432Mini:Dimensions: Length: 0.80 m, Width: 1.40 m, Height: 1.35 m,diameter of reels 1.15 m,space for 1 special lane line – diameter 150 mm – of 25 m,2 special lane lines – diameter 100 mm – of 25 m each or about4 lane lines of 25 m each with floatsCat.-no. 4321Reel trolley“Dismantable”Technical features: This proved reel trolley and reel are dismantable. Thus we achieved a small transporting volume and consequently freight cost savings. Completely made of stablealuminium profiles. Reels can be put down without damaging the lane lines. Standard equipment: Natural bright aluminium finish. Dimensions:approx. Length: 0.80 m, Width: 1.30 m, Height: 1.17 m, reel diameter approx. 0.98 m, space for 2 lane lines with a length of25 m each of the usual lane lines with floatsCat.-no. 423 Trolley (without reel)Cat.-no. 424 Reel

Ball trolley Ball trolley “Easy Take Out” This ball trolley, which is delivered completely welded and thus requires no assembly, is a new type of product made from stable aluminium profiles. The balls are stored on three shelves and can be easily removed when the door is opened. A slight slope in the shelves causes the balls to roll gently toward the opening. By closing the door with a usual lock (not included in delivery), the balls are secured against unauthorised removal. This ball trolley offers space for e.g., 15 soccer balls or water polo balls. Delivery is in a stable wooden crate to prevent damage during transport. Dimensions: Length: 1210 mm, Width: 330 mm, Height: 930 mm Standard equipment: Surface natural bright aluminium, completely welded in one piece, mounted transportation wheels, can thus be used immediately Cat.-no. 1953 Ball trolley with lockable pump compartment At last an all-aluminium ball trolley with the well-known decisive material advantages. The special advantage of the Haspo ball82 trolley is that a special welded-in compartment with subdivisions is used to house a ball pump and various necessary adapters in the immediate vicinity of the balls. Thus no more time lost through searching and gathering together. The lid can be closed by a usual lock, so that also the pump compartment is safe. Technical features: Top and bottom parts with built-in lattice bars – top with lid and pump compartment – are supplied as complete welded construction. The lid is sized so that folding over beyond the trolley is not possible. Injuries are thus avoided. Trackless and easy-running castors assure rapid transport even when the trolley is full. Dimensions: Length: 900 mm, Width: 700 mm, Height: 700 mm, Capacity: up to 80 balls depending on ball type Standard equipment: Natural bright aluminium finish. Incl. theft-proof pump compartment Cat.-no. 195

Rugby/FootballRugby goals/American football goalsTechnical features: Made of the extremely stable andthoroughly proven soccer goal sections. The crossbar is attachedto the uprights with aluminium fastening elements. Easyassembly and disassembly with screw fastenings – no welds. Onehundred percent steady goal location in 800 mm ground socketsthrough application of special wedges – no wavering of goals.Standard equipment: Matt silver anodised finishCat.-no. 600 Cat.-no. 6001Rugby Goals, incl. aluminium fastening elements, ground American football goals, incl. aluminium fastening elements,sockets – insertion depth 800 mm – with covers, and special ground sockets – insertion depth 800 mm – with covers,wedges. The goal uprights for Rugby goals, can upon request be and special wedgeselongated up to 11 m. 83

Badminton Badminton uprights acc. to EN 1509 (test class C), with internal tension mechanism These badminton uprights with internal tension mechanism are available of square profile 80 × 80 mm or round profile with 83 mm diameter. The tensioning upright is equipped with the same tension mechanism as of the tennis uprights of Cat.-no. 500/502 so that the mechanism is protected against external influences. Easy and quick tensioning and loosening of net tension by use of a special spindle. Net and rope are durable as no roll up of the net rope. The crank is inserted in the head of the upright and therefore always ready to hand. Aluminium coating mould parts as covers. Standard equipment: Matt silver anodised finish. Incl. rustproof fixing hooks and sable ground sockets – insertion depth 350 mm – with covers Cat.-no. 550 square, 80 × 80 mm Cat.-no. 552 round, 83 mm diameter Badminton uprights “Standard” acc. to EN 1509 (test class C) Technical features: An alternative solution to the “freestanding badminton upright” which has already gained recognition, since floor sockets for tennis and volleyball are provided at most indoor courts. Standard equipment: Matt silver anodised finish. Incl. rust-resistant net and tensioning hooks and ground sockets – insertion depth 350 mm – with covers Cat.-no. 52084

Information cabinetsInformation cabinetsThe successful information cabinets from Haspo with the decisiveadvantages, naturally made of aluminium.Indoor and outdoor constructions, for use at walls and on uprightsas well as for combination units without additional uprights in themiddle.This programme can be delivered as follows: oblong format, opening through 180° downwards. oblong format, opening upwards. After having opened the flap, gas pressure springs will further open the flap automatically. Therefore it cannot fall down when information documents are fit. upright format with lateral opening.The execution with opening through 180° downwards is a real Oblong format, opening through 180° downwards [1]bargain but cannot be used if, for example there are walls or [2]hedges below the cabinet.There are decisive advantages: Oblong format, opening upwards, supplied with gas pressure springs Due to a special manufacturing procedure frame and flap parts are equipped with especially strong angle connections. Therefore important improvement of stability and better optical impression since no screws or rivets are visible from outside. Cabinets with flap opening upwards are supplied in series with gas pressure springs. All structural components such as frame, flap and hinges are made of aluminium for indestructibility, permanent durability, and complete freedom of maintenance. You never have to paint them. Uprights for freestanding installation also only of aluminium. This is a very special construction which enables infinitely height adjustment of the cabinet due to continuous mounting shafts incorporated into the special-system profile, even if the cabinets are mounted. The elegant design allows both outdoor and indoor. Special sizes upon request as well as an abundant range of accessories meet all planning and layout requirements.Technical features: 85 Functional, elegant construction, made of torsion resistant special system sections of Al Mg Si 0.5, F 25 alloy Frame depth 70 mm Magnetic rear wall of foil-covered steel coloured dark green RAL 6020, the back is galvanized and additionally top-coated The information material is arranged quickly and simply by strong magnets – without damage A seal between frame and rear wall guarantees an optimal protection against weather influences The viewing window consists of 4 mm thick shatter-proof acrylic glass held in the frame by rubber seals Indentical chrome-plated cylinder locks offer protection against unauthorized access. Rubber seals between frame and flap guarantee absolute protection against spray and dust Sufficient air circulation is provided by a built-in ventilation system An interchangeable polystyrene lettering or advertising strip, 100 mm wide (Cat.-no. 900, 9001 and 9002 with 75 mm), may be simply attached in the flap (back side of window)

Information cabinetsInformation cabinetsCat.-no. Outer dimensions Viewing area No. No. No. No. in mm without lettering of of of of W×H×D strips in mm posters locks keys magnetsOblong format, opening through 180° downwards (photo 1 on page 85) 2 10 4 20900 695 × 532 × 70 535 × 372 2 × A4 – 5 × A6 1 4 30 2 4 30901 1.007 × 857 × 70 847 × 697 8 × A4 – 4 × A6 2 2 2 10902 1.357 × 1.031 × 70 1.197 × 871 18 × A4 4 20 4 30903 1.600 × 1.024 × 70 1.440 × 864 21 × A4 4 30Oblong format, opening upwards (photo 2 on page 85) – supplied with gas pressure springs 2 10 4 209001 695 × 532 × 70 535 × 372 2 × A4 – 5 × A6 19011 1.007 × 857 × 70 847 × 697 8 × A4 – 4 × A6 29021 1.357 × 1.031 × 70 1.197 × 871 18 × A4 29031 1.600 × 1.024 × 70 1.440 × 864 21 × A4 2Upright format, lateral opening to the right9002 532 × 695 × 70 372 × 535 2 × A4 Q – 2 × A6 1 6 × A4 – 2 × A4 Q 29012 857 × 1.007 × 70 697 × 847Upright sets:Cat.-no. 905Upright set (two uprights) for freestanding installation, to be set in concrete, made of aluminium specialprofiles 80 × 40 mm, length 2500 mm, incl. fixing material and coversCat.-no. 915Upright set (two uprights) for wall fixing made of aluminium special profiles 80 × 40 mm,length 1250 mm, with welded feet 120 × 120 × 8 mm, bored (without photo)Cat.-no. 925Upright set (two uprights) for freestanding installation, to be set in concrete, for the assembly of 2 cabinets,back mounting, made of aluminium special profiles 80 × 80 mm, length 2500 mm, incl. fixing material andcovers (without photo)Accessories Lettering strips: Lighting fitting incl. fluorescent strip light and mounting materials:86 Cat.-no. 907 Polystyrene lettering strip – white, Cat.-no. 9061 100 mm high (Cat.-no. 900, 9001 and 9002 only 75 mm), For Cat.-no. 900/901/9001/9011/9002/9012, unlettered, for all cabinet sizes 18 Watt strip lightCat.-no. 9075 Cat.-no. 9062Lettering strip as above, but with text to specification – up to 15 For Cat.-no. 902/903/9021/9031,characters 30 Watt strip lightCat.-no. 9076 Cat.-no. 908Additional characters (in case of lettering strip of Cat.-no. 9075) Additional magnets – pack of 10

SparesSpares Connection element crossbar/uprights for goals of oval profile with welded mitreIn case of spare parts orders pleasenote the indicated description.Or make use of our technical advice. Cast corner joint for goals of oval profile (connection crossbar/uprights)Welded corner joint construction for goals of Cat.-no. 109, Cast corner joint for goals of square profile Wide and small connecting angles for goals of Cat.-no. 120,110 (connection upright/ground spar) (connection crossbar/uprights) 121, 140, 141 (connection upright/ground spar) NewsNewsSoccer goals (See detail photo 1) Mini training goals “Professional” [1] [5](detailed description see page 9) (See detail photo 5) [2] [6] (detailed description see page 30) [3] [7]Cat.-no. 1082 [4] Cat.-no. 872, Cat.-no. 87245,Small pitch goals (See detail photo 2) Cat.-no. 8721, Cat.-no. 872145,(detailed description see page 21) Cat.-no. 8723, Cat.-no. 872345Cat.-no. 1159 Safety mini training goals 87 (See detail photo 6) 87Soccer goals (See detail photo 3) (detailed description see page 34)(detailed description see page 22) Cat.-no. 152345Cat.-no. 124 Mini goals “Professional”Junior soccer goals (See detail photo 7)(See detail photo 4) (detailed description see page 35)(detailed description see page 22) Cat.-no. 1926Cat.-no. 125

Haspo SportgeräteGmbH & Co. KGJohannisweg 23/2538723 Seesen-RhüdenPhone +49 (0) 53 84-96 97 50Fax +49 (0) 53 84-96 97 [email protected] informationMaterials Freestanding goalsMost of the products listed in this catalogue are extensively For freely accessible areas e. g. playgrounds only goals “Forconstructed of extruded aluminium sections of the alloy AI Mg Si insertion in ground sockets” are recommended.0.5, F 22 – 25, anodised grade in accordance with DIN1748/17615. Assembly instructions These are included with the equipment in German, English andSurface treatments French. Very important for exports.Anodising All equipment complies with the international regulations in termsThe electric oxidising of aluminium is a process which produces a of dimensions and design and is supplied with all the necessaryhigh-strength oxide layer = predective layer on aluminium. The accessories, but without nets unless these are explicitly specifiedhardness and wearablility of this oxide layer combined with the under the standard equipment.possiblities offered by modern anodising technology are yourguaranty that, given proper care, the treated parts will have an Apart from our standard equipment, we can also manufactureattractive appearance for many years. special dimensions and designs on request.Powder Coating We are continuously engaged in the further development of ourFor the coating a polyester powder is used which is burnt in for equipment and therefore reserve the right to make technical30 Minutes with a temperature of 180° to 200° after a careful alterations without prior notice.chemichal and chromating treatment of the aluminium. Withoutthis treatment there are considerable risks with respect to theadherence of the enamel. This coating is done acc. to theregulations of the “Gütergemeinschaft für Stückgutbeschich-tung”. The process cannot be compared with a simple enamellingwhich is usually offered with the well-known disadvantages as forexample flaking of the enamel and the colour.