Duffells van catalog

Multipoint Door Locks 2 Hooks Multipoint Door Locks Cobra - 20mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE 4933043 35mm 1607830 35mm Flat 20mm Round Ends Split 8mm 4952529 35mm 29490268 45mm Flat 20mm Round Ends Single 8mm 2949501 45mm 1504737 45mm Flat 20mm Square Ends Split 8mm 2949172 55mm Flat 20mm Round Ends Split 8mm Flat 20mm Round Ends Single 8mm Flat 20mm Square Ends Split 8mm Flat 20mm Round Ends Split 8mm This classic 2 hook Cobra features a central deadbolt. Full Length Multipoint Locks The options on this page are 20mm faceplate locks. 16mm variations are listed on the previous page. If you have a lift lever lock, use this lock with a solid spindle. Faceplate maybe marked STV-F2070. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to the side of spindle hole contains a black roll pin. Insert a flat bladed screwdriver and roll the pin to the opposite side to reverse function. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 199

Multipoint Door Locks Multipoint Door Locks 2 Hooks Cobra - Key wind (K/W) - 16mm faceplate - These locks are handed ORDER CODE BACKSET FACEPLATE SPINDLE HAND 1028067 35mm RH 1028075 35mm Flat 16mm Square Ends Single 8mm LH 1028661 45mm RH 1028679 45mm Flat 16mm Square Ends Single 8mm LH 2856742 55mm RH 2856734 55mm Flat 16mm Square Ends Single 8mm LH Flat 16mm Square Ends Single 8mm Flat 16mm Square Ends Single 8mm Flat 16mm Square Ends Single 8mm Full Length Multipoint Locks These key wind locks are handed and cannot be reversed on site. Please use the handing chart below to identify the correct hand required. These locks have a flat 16mm faceplate; 20mm versions are on the following page. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Key wind ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 200

Multipoint Door Locks 2 Hooks Multipoint Door Locks Key wind (K/W) - 20mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE 2948840 35mm 2946094 45mm Flat 20mm Round Ends Single 8mm Flat 20mm Round Ends Single 8mm These key wind locks are not handed and can be reversed on site. The locks listed on this page have 20mm faceplate. Please see the previous page for 16mm faceplate versions. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Key wind ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Full Length Multipoint Locks ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 201

Multipoint Door Locks Multipoint Door Locks 2 Hooks Cobra - Short version (1340mm) - 16mm Faceplate ORDER CODE BACKSET FACEPLATE SPINDLE 4932691 35mm 2947311 45mm Flat 16mm Square Ends Split 8mm Flat 16mm Square Ends Split 8mm This 2 hook cobra has smaller distances between the hooks, measuring 1340mm compared with 1490mm for a normal Cobra. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1340mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to the side of spindle hole contains a black roll pin. Insert a flat bladed screwdriver and roll the pin to the opposite side to reverse function. Full Length Multipoint Locks ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 202

Multipoint Door Locks 2 Hooks Multipoint Door Locks Cobra - French door version which is compatible with shootbolts ORDER CODE BACKSET FACEPLATE SPINDLE TOP SHOOTBOLTS 1606930 35mm 4939388 45mm Flat 16mm Square Ends Single 8mm 2823908 470mm top 2414012 35mm Flat 16mm Square Ends Single 8mm Flat 16mm Square Ends Split 8mm This lock features connectors for use on the master door of a pair of French doors. Shootbolts are listed in the associated items on this page. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and undo screw in back of lock case to remove latch, reverse and reinstate Nightlatch reversal: Small rectangular slot to side of spindle hole contains a black split pin. Insert flat bladed screwdriver and push split pin to opposite side to reverse function. ASSOCIATED PRODUCTS Full Length Multipoint Locks SHOOTBOLTS 175mm bottom 372mm bottom 2500480 489mm bottom 2930754 773mm bottom 2500498 2096392 203

Multipoint Door Locks Multipoint Door Locks 2 Hooks & Entryguard Entryguard facility prevents the door from being fully opened until released - Split Spindle (S/S) ORDER CODE BACKSET FACEPLATE SPINDLE 1607060 35mm 1606120 45mm Flat 16mm Square Ends Split 8mm 4964404 55mm 4932937 55mm Flat 16mm Square Ends Split 8mm Flat 16mm Square Ends Split 8mm Flat 20mm Round Ends Split 8mm Full Length Multipoint Locks This Cobra features an Entryguard facility which engages with the door frame, preventing the door from being fully opened until released. Working in a similar way to a door chain, it allows the occupier to see who is at the door before opening it. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm Top hook to entryguard spindle: 400mm Entryguard backset: 35mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 204

Multipoint Door Locks 3 Hooks & Entryguard Multipoint Door Locks Entryguard facility prevents the door from being fully opened until released - Split Spindle (S/S) ORDER CODE BACKSET FACEPLATE SPINDLE 4932968 45mm Flat 16mm Square Ends Split 8mm This Cobra features an Entryguard facility which engages Full Length Multipoint Locks with the door frame, preventing the door from being fully opened until released. Working in a similar way to a door chain, it allows the occupier to see who is at the door before opening it. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between outer hooks: 1490mm Top hook to entryguard spindle: 400mm Entryguard backset: 35mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS Keep Set SPECIAL ORDER SHOOTBOLTS Incompatible 205

Multipoint Door Locks Multipoint Door Locks 2 Hooks & Lockout box Lockout facility allows the door to be deadlocked - Split Spindle (S/S) ORDER CODE BACKSET FACEPLATE SPINDLE LOCKOUT BACKSET 1607020 35mm 35mm 2945294 45mm Flat 16mm Square Ends Split 8mm 45mm 4939381 55mm 35mm 2945121 55mm Flat 16mm Square Ends Split 8mm 45mm 1606130 55mm 55mm Flat 16mm Square Ends Split 8mm Flat 16mm Square Ends Split 8mm Flat 20mm Round Ends Split 8mm This Cobra features a Lockout facility which allows Lockout the door to be deadlocked. Designed for use when the facility box property may be unoccupied for a period of time. Full Length Multipoint Locks SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm Top hook to centre of lockout box: 350mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 206

Multipoint Door Locks 2 Hook, Entryguard & Lockout Multipoint Door Locks Entryguard facility prevents door from being fully opened until released - Lockout facility allows door to be deadlocked - Split Spindle (S/S) ORDER CODE BACKSET FACEPLATE SPINDLE LOCKOUT BACKSET 2946238 55mm 55mm 4933047 55mm Flat 16mm Square Ends Split 8mm 55mm Flat 20mm Round Ends Split 8mm This Cobra features both the Entryguard and Lockout Full Length Multipoint Locks functions. On this model the Lockout box is located below the central gearbox. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 9mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm Top hook to centre of lockout box: 350mm Top hook to entryguard spindle: 400mm Entryguard backset: 35mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 207

Multipoint Door Locks Multipoint Door Locks 4 Hook Cobra - Split spindle (S/S) ORDER CODE BACKSET FACEPLATE SPINDLE 1029826 28mm 1504638 35mm Flat 16mm Square Ends Single 8mm 1609520 45mm 2414303 55mm Flat 16mm Square Ends Split 8mm Flat 16mm Square Ends Split 8mm Flat 16mm Square Ends Split 8mm Full Length Multipoint Locks This classic 4 hook Cobra features a central deadbolt. The options on this page are 16mm faceplate locks. If you have a lift lever lock, use this lock with a solid spindle. Faceplate may be marked STV-F1660. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between outer hooks: 1490mm Distance between inner hooks: 780mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 208

Multipoint Door Locks 4 Hook Multipoint Door Locks Cobra - Key wind (K/W) - 16mm faceplate - These locks are handed - Use the handing chart on page [xref] ORDER CODE BACKSET FACEPLATE SPINDLE HAND 1028083 35mm RH 1028091 35mm Flat 16mm Square Ends Single 8mm LH Flat 16mm Square Ends Single 8mm These key wind locks are handed and cannot be reversed on site. Please use the handing chart below to identify the correct hand required. These locks have a flat 16mm faceplate. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between outer hooks: 1490mm Distance between inner hooks: 780mm ✓✓ Operation: Key wind ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Full Length Multipoint Locks ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 209

Multipoint Door Locks Multipoint Door Locks Slave lock Cobra - French door lock ORDER CODE BACKSET FACEPLATE SPINDLE TOP SHOOTBOLTS 2093896 35mm 2823908 470mm top 2945227 45mm Flat 16mm Square Ends Single 8mm Flat 16mm Square Ends Single 8mm Winkhaus Cobra slave lock for French doors supplied with attachments for a variety of different sized shootbolts. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Operation: Lift lever ✓✓ Latch reversal: N/A Full Length Multipoint Locks ASSOCIATED PRODUCTS SHOOTBOLTS 210 2500480 175mm bottom 2930754 372mm bottom 2500498 489mm bottom 2096392 773mm bottom

Multipoint Door Locks 2 Hooks & 2 Rollers Multipoint Door Locks Split spindle version ORDER CODE BACKSET FACEPLATE SPINDLE 2414021 35mm Flat 16mm Square Ends Split 8mm This Cobra features rollers for compression on PVCu doors. If lift lever function is required, select this lock and use a solid spindle. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between outer hooks: 1490mm Distance between inner rollers: 1081mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS Full Length Multipoint Locks Order Code Colour Lever/Lever UPVC Keeps DCHANLL92WH DCHANLL92SC DCHANLL92BL DCHANLL92HG DCHANLL92BC Order Code Colour Lever/Moveable Pad DCHANLP92WH Order Code Description Qty DCHANLP92SC DCHANLP92BL V-CENSTRIKE Latch & deadbolt keep 1 DCHANLP92HG V-HSTRIKE Pair deadbolt keeps 1 DCHANLP92BC E11637 Roller keep 2 Order Code Description SHOOTBOLTS Incompatible 4978054 Split spindle for 44mm door 4978055 Split spindle for 56mm door 4978056 Split spindle for 70mm door 4928572 Split spindle for 108mm door 4928571 Split spindle for 120mm door 211

Multipoint Door Locks Multipoint Door Locks 2 Hooks Scorpion lock with hook in the centre - Often fitted to aluminium doors. ORDER CODE BACKSET FACEPLATE SPINDLE 2334119 35mm Flat 16mm Square Ends Split 8mm This Scorpion lock features 3 hookbolts and is often fitted to aluminium doors. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: 53mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1260mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. Full Length Multipoint Locks ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 212

Multipoint Door Locks 2 Hooks & 2 Rollers Multipoint Door Locks Scorpion lock - Standard version - 1390mm between hooks ORDER CODE BACKSET FACEPLATE SPINDLE 2398251 35mm Flat 16mm Square Ends Split 8mm This Scorpion lock features rollers as well as hooks for Full Length Multipoint Locks compression. If lift lever function is required, use with a solid spindle. 2 versions of this lock are available, with 1390mm and 1250mm between the hooks. This version has 1390mm between the hooks. For the narrow version, see the next page. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: 53mm ✓✓ Centres: 92mm ✓✓ Distance between outer rollers: 1580mm Distance between inner hooks: 1390mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: Small rectangular slot to side of spindle hole contains a black split pin, insert flat bladed screwdriver and push split pin to opposite side to reverse function. ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps DCHANLL92WH DCHANLL92SC DCHANLL92BL DCHANLL92HG DCHANLL92BC Order Code Colour Lever/Moveable Pad DCHANLP92WH Order Code Description Qty DCHANLP92SC DCHANLP92BL V-CENSTRIKE Latch & deadbolt keep 1 DCHANLP92HG V-HSTRIKE Pair deadbolt keeps 1 DCHANLP92BC E11637 Roller keep 2 Order Code Description 4978054 Split spindle for 44mm door 4978055 Split spindle for 56mm door 4978056 Split spindle for 70mm door 4928572 Split spindle for 108mm door 4928571 Split spindle for 120mm door SHOOTBOLTS Compatible 213

Multipoint Door Locks Multipoint Door Locks 2 Hooks & 2 Rollers Scorpion lock - Narrow version - 1250mm between hooks ORDER CODE BACKSET FACEPLATE SPINDLE 2398374 35mm Flat 16mm Square Ends Split 8mm Full Length Multipoint Locks This Scorpion lock features rollers as well as hooks for compression. If lift lever function is required, use with a solid spindle. 2 versions of this lock are available, with 1390mm and 1250mm between the hooks. The standard version is on the previous page. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: 53mm ✓✓ Centres: 92mm ✓✓ Distance between outer rollers: 1405mm Distance between inner hooks: 1250mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps DCHANLL92WH DCHANLL92SC DCHANLL92BL DCHANLL92HG DCHANLL92BC Order Code Colour Lever/Moveable Pad DCHANLP92WH Order Code Description Qty DCHANLP92SC DCHANLP92BL V-CENSTRIKE Latch & deadbolt keep 1 DCHANLP92HG V-HSTRIKE Pair deadbolt keeps 1 DCHANLP92BC E11637 Roller keep 2 Order Code Description SHOOTBOLTS Incompatible 4978054 Split spindle for 44mm door 4978055 Split spindle for 56mm door 4978056 Split spindle for 70mm door 4928572 Split spindle for 108mm door 4928571 Split spindle for 120mm door 214

Multipoint Door Locks 4 Hooks & 2 Rollers Multipoint Door Locks Scorpion lock - If lift lever functionality is required, use this lock with a solid spindle - ORDER CODE BACKSET FACEPLATE SPINDLE TOP SHOOTBOLTS 2398278 35mm 2823908 470mm top Flat 16mm Square Ends Split 8mm This Scorpion features 5 hooks and 2 rollers. If lift Full Length Multipoint Locks lever functionality is required, use this lock with a solid spindle. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between outer rollers: 1575mm Distance between outer hooks: 1429mm Distance between inner hooks: 775mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps DCHANLL92WH DCHANLL92SC DCHANLL92BL DCHANLL92HG DCHANLL92BC Order Code Colour Lever/Moveable Pad DCHANLP92WH DCHANLP92SC DCHANLP92BL DCHANLP92HG DCHANLP92BC Order Code Description SHOOTBOLTS 4978054 Split spindle for 44mm door Order Code Description Qty 2500480 175mm bottom 4978055 Split spindle for 56mm door 2930754 372mm bottom 4978056 Split spindle for 70mm door V-CENSTRIKE Latch & deadbolt keep 1 2500498 489mm bottom 4928572 Split spindle for 108mm door V-HSTRIKE Pair hookbolt keeps 2 2096392 773mm bottom 4928571 Split spindle for 120mm door E11637 Roller keep 2 215

Multipoint Door Locks Multipoint Door Locks Slave lock Scorpion SLK - For use on French doors ORDER CODE BACKSET FACEPLATE SPINDLE TOP SHOOTBOLTS 2398438 35mm 2823908 470mm top Flat 16mm Square Ends Single 8mm This slave lock is designed to be used on the slave door of a pair of French doors with the main door being fitted with a Scorpion multipoint door lock. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Operation: Slave lock ✓✓ Latch reversal: N/A Full Length Multipoint Locks ASSOCIATED PRODUCTS SHOOTBOLTS 216 2500480 175mm bottom 2930754 372mm bottom 2500498 489mm bottom 2096392 773mm bottom

Multipoint Door Locks 2 Hooks Multipoint Door Locks Flat 16mm faceplate - AV2 Automatic lock - Compatible with motors to achieve electronic locking - Locks are handed, refer to handing chart ORDER CODE BACKSET FACEPLATE SPINDLE HAND 2352122 35mm RH 2352131 35mm Flat 16mm Square Ends Single 8mm LH 2352157 45mm RH 2352165 45mm Flat 16mm Square Ends Single 8mm LH 2352173 55mm RH 2352181 55mm Flat 16mm Square Ends Single 8mm LH Flat 16mm Square Ends Single 8mm Flat 16mm Square Ends Single 8mm Flat 16mm Square Ends Single 8mm Hooks on this lock are automatically engaged as the Full Length Multipoint Locks door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key throws the deadbolt. Upgrade easily to electronic locking using the associated products listed in the electronic locking section of this catalogue. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Automatic ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Locks are handed, please refer to the handing chart below: ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 217

Multipoint Door Locks Multipoint Door Locks 2 Hooks Flat 20mm faceplate - AV2 Automatic lock - Compatible with motors to achieve electronic locking - Locks are handed, refer to handing chart ORDER CODE BACKSET FACEPLATE SPINDLE HAND 2352691 45mm RH 2352739 45mm Flat 20mm Square Ends Single 8mm LH 2352798 55mm RH 2352801 55mm Flat 20mm Square Ends Single 8mm LH Flat 20mm Square Ends Single 8mm Flat 20mm Square Ends Single 8mm Full Length Multipoint Locks Hooks on this lock are automatically engaged as the door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key throws the deadbolt. Upgrade easily to electronic locking using the associated products listed in the electronic locking section. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Automatic ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Locks are handed, please refer to the handing chart below: ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 218

Multipoint Door Locks 2 Hooks Multipoint Door Locks Radius 20mm faceplate - AV2 Automatic lock - Compatible with motors to achieve electronic locking - Locks are handed, refer to handing chart ORDER CODE BACKSET FACEPLATE SPINDLE HAND 2771116 35mm RH 2771124 35mm Flat 20mm Round Ends Single 8mm LH 2559721 45mm RH 2559887 45mm Flat 20mm Round Ends Single 8mm LH 2559895 55mm RH 2559908 55mm Flat 20mm Round Ends Single 8mm LH Flat 20mm Round Ends Single 8mm Flat 20mm Round Ends Single 8mm Flat 20mm Round Ends Single 8mm Hooks on this lock are automatically engaged as the Full Length Multipoint Locks door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key throws the deadbolt. Upgrade easily to electronic locking using the associated products listed in the electronic locking section. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Automatic ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw.. Locks are handed, please refer to the handing chart below: ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 219

Multipoint Door Locks Multipoint Door Locks 2 Hooks U-Rail 20mm faceplate - AV2 Automatic lock - Compatible with motors to achieve electronic locking - Locks are handed, refer to handing chart ORDER CODE BACKSET FACEPLATE SPINDLE HAND 4980929 35mm U-Rail 24mm Single 8mm RH 4980930 35mm U-Rail 24mm Single 8mm LH Full Length Multipoint Locks Hooks on this lock are automatically engaged as the door is closed without needing to lift the handle. The handle will retract the hooks from the inside and a further turn of the key throws the deadbolt. Upgrade easily to electronic locking using the associated products listed in the electronic locking section. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Automatic ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Locks are handed, please refer to the handing chart below: ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 220

Multipoint Door Locks 2 Hooks Multipoint Door Locks Flat 16mm faceplate - Trulock series - Predominantly used on composite and timber doors - Locks are handed, refer to handing chart ORDER CODE BACKSET FACEPLATE SPINDLE HAND 4933056 45mm LH 4933055 45mm Flat 16mm Square Ends Split 8mm RH Flat 16mm Square Ends Split 8mm The Winkhaus Trulock is a product designed primarily Full Length Multipoint Locks for the composite, steel and timber door market. Its major feature is an enhanced tensile steel hook design with a 4.5mm chamfer, which offers reduced operating forces and increased on-site installation tolerance. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Locks are handed, please refer to the handing chart below: ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 221

Multipoint Door Locks Multipoint Door Locks 2 Hooks Flat 20mm faceplate - Trulock series - Predominantly used on composite and timber doors - Locks are handed, refer to handing chart ORDER CODE BACKSET FACEPLATE SPINDLE HAND 2897851 45mm LH 2897843 45mm Flat 20mm Square Ends Split 8mm RH Flat 20mm Square Ends Split 8mm Full Length Multipoint Locks The Winkhaus Trulock is a product designed primarily for the composite, steel and timber door market. Its major feature is an enhanced tensile steel hook design with a 4.5mm chamfer, which offers reduced operating forces and increased on-site installation tolerance. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1490mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Locks are handed, please refer to the handing chart below: ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 222

Multipoint Door Locks Thunderbolt Multipoint Door Locks 16mm or 20mm radius faceplate - Twin deadbolts meet PAS23/24 standards. ORDER CODE BACKSET FACEPLATE SPINDLE 4941783 35mm 4941784 45mm Flat 16mm Radius Ends Single 8mm 4941787 45mm Flat 16mm Square Ends Single 8mm Flat 20mm Radius Ends Single 8mm The Winkhaus ThunderBolt 5 has been especially designed with increased tolerances for door installers. This locking system incorporates twin deadbolts in the upper and lower positions, providing high security levels that easily passes the rigours of PAS23/24 and EN14351-1 2006 security standards. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between deadbolts: 1490mm ✓✓ Operation: Lift lever ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever Left Hand UPVC Keeps DCHANLL92WH Order Code Description Qty DCHANLL92SC DCHANLL92BL 1038009 Latch & deadbolt keep (Left hand) 1 DCHANLL92HG DCHANLL92BC 1025113 Pair hook keeps 1 Right Hand UPVC Keeps Order Code Description Qty 1038017 Latch & deadbolt keep (Right hand) 1 SHOOTBOLTS Incompatible 1025113 Pair hook keeps 1 223

Multipoint Door Locks Multipoint Door Locks Thunderbolt Pyro Flat 20mm faceplate - Steel latch suitable for use on FD30 fire doors. ORDER CODE BACKSET FACEPLATE SPINDLE 4941813 45mm Flat 20mm Radius Ends Split 8mm Full Length Multipoint Locks The Winkhaus ThunderBolt 5 has been especially designed with increased tolerances for door installers. The latch is made of Steel and is suitable for FD30 Fire Doors. This locking system incorporates twin deadbolts in the upper and lower positions, providing high security levels that easily passes the rigours of PAS23/24 and EN14351-1 2006 security standards. SPECIFICATION: ✓✓ Case height: 185mm ✓✓ Case Depth: Backset + 18mm ✓✓ Centres: 92mm ✓✓ Distance between deadbolts: 1490mm ✓✓ Operation: Lift lever ✓✓ Latch reversal: Push in latch and a screw will appear in back of lockcase. Undo the screw to remove the latch. Reverse, reinsert and replace screw. Nightlatch reversal: The small rectangular slot adjacent to side of the spindle hole contains a black roll pin. Insert flat bladed screwdriver and roll the pin to opposite side to reverse function. ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 224

Multipoint Door Locks 4 Rollers Multipoint Door Locks YS170 series ORDER CODE BACKSET FACEPLATE SPINDLE YS1354R 35mm Flat 16mm Square Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between outer rollers: 1642mm Distance between inner rollers: 901mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s). Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty V-CENSTRIKE Latch & deadbolt keep 1 E11637 Roller keep 4 SHOOTBOLTS Incompatible 225

Multipoint Door Locks Multipoint Door Locks 2 Hooks YS170 series - Square 16mm x 1930mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE YS1353H16FL 35mm Flat 16mm Square Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock is available in short (1930mm) and long (2200mm) versions. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1198mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s). Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty V-CENSTRIKE Latch & deadbolt keep 1 V-HSTRIKE Pair Hook keeps 1 SHOOTBOLTS Incompatible 226

2 Hooks Multipoint Door Locks Multipoint Door Locks YS170 series - Square 16mm x 2200mm faceplate TOP SHOOTBOLTS ORDER CODE BACKSET FACEPLATE SPINDLE PAD90088S Part of shootbolt set YS1353H16F 35mm YS1453H16F 45mm Flat 16mm Square Ends Split 8mm specified below Flat 16mm Square Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock is available in 16mm, 20mm and 20mm rounded faceplate versions. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1448mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s). Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty SHOOTBOLTS V-CENSTRIKE Latch & deadbolt keep 1 PAD90088S V-HSTRIKE Pair Hook keeps 1 Shootbolt Set Top 112mm Bottom 150mm 227

Multipoint Door Locks Multipoint Door Locks 2 Hooks YS170 series - Square 20mm x 1836mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE YS1353H20F 35mm YS1453H20F 45mm Flat 20mm Square Ends Split 8mm Flat 20mm Square Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock is available in square and radius 20mm faceplate versions. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1630mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s). Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty V-CENSTRIKE Latch & deadbolt keep 1 V-HSTRIKE Pair Hook keeps 1 SHOOTBOLTS Incompatible 228

Multipoint Door Locks 2 Hooks Multipoint Door Locks YS170 series - Round 20mm x 1770mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE YS1353H20R 35mm YS1453H20R 45mm Flat 20mm Round Ends Split 8mm Flat 20mm Round Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock is available in square and radius 20mm faceplate versions. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between hooks: 1630mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s). Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty SHOOTBOLTS Incompatible V-CENSTRIKE Latch & deadbolt keep 1 V-HSTRIKE Pair Hook keeps 1 Keeps listed above suit UPVC profiles. Refer to Multipoint Lock Strikes & Keeps chapter for wood and composite door keeps. 229

Multipoint Door Locks Multipoint Door Locks 2 Hooks & 2 Rollers YS170 series - Square 16mm x 2200mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE YS1353H2R16F 35mm Flat 16mm Square Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock features 3 hooks and 2 rollers. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between outer rollers: 1642mm Distance between hooks: 1448mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s). Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty SHOOTBOLTS Incompatible V-CENSTRIKE Latch & deadbolt keep 1 V-HSTRIKE Pair deadbolt keeps 1 E11637 Roller keep 2 230

Multipoint Door Locks 2 Hooks & 4 Rollers Multipoint Door Locks YS170 series - Square 16mm x 2200mm faceplate ORDER CODE BACKSET FACEPLATE SPINDLE YS1353H4R16F 35mm Flat 16mm Square Ends Split 8mm Yale’s newest multipoint lock is the YS170 which features a central hookbolt for increased security and easily reversible latch. This lock features 3 hooks and 4 rollers. SPECIFICATION: ✓✓ Case height: 210mm ✓✓ Case Depth: Backset + 17mm ✓✓ Centres: 92mm ✓✓ Distance between outer rollers: 1642mm Distance between inner rollers: 1253mm Distance between hooks: 1448mm ✓✓ Operation: Lift lever or split spindle nightlatch ✓✓ Latch reversal: Undo the screw or screws (depending on the model) in the latch to remove. Reverse, reinsert and replace screw(s) Full Length Multipoint Locks ASSOCIATED PRODUCTS Order Code Colour Lever/Lever UPVC Keeps YHF7LLWH YHF7LLSC YHF7LLBL YHF7LLeft handG YHF7LLBC Order Code Description Qty V-CENSTRIKE Latch & deadbolt keep 1 V-HSTRIKE Pair deadbolt keeps 1 E11637 Roller keep 4 SHOOTBOLTS Incompatible 231

Multipoint Door Locks Multipoint Door Locks V-MPL for UPVC Doors 2 Roller & 2 Mushroom Version ORDER CODE BACKSET FACEPLATE SPINDLE V-MPL2R2M25 25mm 16mm Solid 8mm V-MPL2R2M28 28mm 16mm Solid 8mm V-MPL2R2M30 30mm 16mm Solid 8mm V-MPL2R2M35 35mm 16mm Solid 8mm V-MPL2R2M45 45mm 16mm Solid 8mm Multipoint Repair Locks The V-MPL is the repair lock with the largest range of backsets on the market and has the greatest flexibility when replacing existing multipoint locks. It covers almost every Roller & Mushroom cam multipoint on the market. Supplied in 3 parts with serrated shoe connectors and UPVC keeps. Adjustable packers mean that keeps will fit any profile. 3 piece lock. 3 part keep system. Frame fixing tabs. Adjustable packers to suit any profile. SPECIFICATION: ✓✓ Max distance between rollers: 877mm Min distance between rollers: 377mm ✓✓ Centres: 92mm ASSOCIATED PRODUCTS SHOOTBOLTS Incompatible 232

V-MPL for UPVC Doors Multipoint Door Locks Multipoint Door Locks 2 Hook & 2 Roller Version TOP SHOOTBOLTS ORDER CODE BACKSET FACEPLATE SPINDLE V-MPLSHOOT16 Part of shootbolt set V-MPL25 25mm 16mm Solid 8mm V-MPL28 28mm 16mm Solid 8mm below V-MPL30 30mm 16mm Solid 8mm V-MPLSS35 35mm 16mm Split 8mm V-MPL40 40mm 16mm Solid 8mm V-MPLSS45 45mm 16mm Split 8mm V-MPL55 55mm 16mm Split 8mm The V-MPL is the repair lock with the largest range of backsets on the market and has the Multipoint Repair Locks greatest flexibility when replacing existing multipoint locks. It features over 500mm of serrations covering almost every hook multipoint on the market and can accept shootbolts. Supplied in 3 parts with serrated shoe connectors and UPVC keeps. Adjustable packers mean that keeps will fit any profile. 35mm and 45mm backset locks feature a split spindle. 3 piece lock. 3 part keep system. Frame fixing tabs. Adjustable packers to suit any profile SPECIFICATION: ✓✓ Max top hook to spindle: 847mm Min top hook to spindle: 347mm Max bottom hook to spindle: 877mm Min bottom hook to spindle: 377mm ✓✓ Centres: 92mm ASSOCIATED PRODUCTS SHOOTBOLTS Pair of top & V-MPLSHOOT16 bottom shootbolts 233

Multipoint Door Locks Multipoint Door Locks V-MPLT for Timber & Composite Doors 2 Hook Version (20mm faceplate) ORDER CODE BACKSET FACEPLATE SPINDLE TOP SHOOTBOLTS V-MPLSST35 35mm 20mm Split 8mm V-MPLSST45 45mm 20mm Split 8mm V-MPLSHOOT20 Part of shootbolt 55mm 20mm Solid 8mm set below V-MPLT55 Multipoint Repair Locks The V-MPLT has all of the features of the normal VERSA lock but is specifically designed for timber and composite doors and features a 20mm faceplate. Supplied in 3 parts with serrated shoe connectors and UPVC keeps. Adjustable packers mean that keeps will fit any profile. 35mm and 45mm backset locks feature a split spindle 3 piece lock. 3 part keep system. Frame fixing tabs. Adjustable packers to suit any profile. SPECIFICATION: ✓✓ Max top hook to spindle: 847mm Min top hook to spindle: 347mm Max bottom hook to spindle: 877mm Min bottom hook to spindle: 377mm ✓✓ Centres: 92mm ASSOCIATED PRODUCTS SHOOTBOLTS 234 V-MPLSHOOT20 Pair of top & bottom shootbolts

Multipoint Door Locks Doormaster Universal Multipoint Door Locks Suits UPVC Doors ORDER CODE BACKSET FACEPLATE SPINDLE YADMUNI35 35mm 16mm Split 8mm YADMUNI45 45mm 16mm Split 8mm The Universal Yale Doormaster lock replaces 100% of 35mm and 45mm backset multipoint locks with 92mm centres on the market. Supplied as a 1 piece lock with 1 piece pre-assembled keep and patented uni-packer system for fast, easy and reliable installation. 1 Piece lock, full length keep and uni-packer system. Fixing screws pack. SPECIFICATION: ✓✓ Distance between mushrooms: 1118mm Distance between rollers: 1318mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 235

Multipoint Door Locks Multipoint Door Locks Doormaster Adjustable Suits UPVC Doors ORDER CODE BACKSET FACEPLATE SPINDLE YADMADJ35 35mm 16mm Split 8mm Adjustable length and hook positions to fit most PVCu doors. Supplied with pre-assembled keeps using the patented uni-packer system for fast easy and reliable installation. 3 piece lock. 3 part keeps and uni-packer system. x2 Allen keys. Fixing screws pack. Split spindle. SPECIFICATION: ✓✓ Max top hook to spindle: 860mm Min top hook to spindle: 520mm Max bottom hook to spindle: 870mm Min bottom hook to spindle: 545mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 236

Multipoint Door Locks Doormaster Professional - with rollers Multipoint Door Locks Suits UPVC Doors ORDER CODE BACKSET FACEPLATE SPINDLE YADMPRO35 35mm 16mm Split 8mm YADMPRO45 45mm 16mm Split 8mm Croppable extensions that offer replacement for an even wider range of multipoint locks. Supplied with pre-assembled keeps using the patented. Meets ‘Secured by Design’ and PAS24 door set standards. 3 piece lock. 3 part keeps and uni-packer system. x2 Allen keys. Fixing screws pack. Split spindle. SPECIFICATION: ✓✓ Max top hook to spindle: 820mm Min top hook to spindle: 385mm Max bottom hook to spindle: 845mm Min bottom hook to spindle: 408mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 237

Multipoint Door Locks Multipoint Door Locks Doormaster Professional - without rollers Suits Timber & Composite Doors ORDER CODE BACKSET FACEPLATE SPINDLE YADMPRO35TIM 35mm 16mm Split 8mm YADMPRO45TIM 45mm 16mm Split 8mm YADMPRO2045 45mm 20mm Split 8mm This version has no rollers and is specifically designed for timber and composite doors. Supplied with specialist timber/composite keeps and fixing tabs for easy and secure fitting. Rounded ends. Meets ‘Secured by Design’ and PAS24 door set standards. 3 piece lock. 3 part keeps and uni-packer system. x2 Allen keys. Fixing screws pack. Split spindle SPECIFICATION: ✓✓ Max top hook to spindle: 820mm Min top hook to spindle: 385mm Max bottom hook to spindle: 845mm Min bottom hook to spindle: 408mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 238

Doormaster British Standard - with rollers Multipoint Door Locks Multipoint Door Locks British Standard Version. UPVC doors PAS3621:2011 ORDER CODE BACKSET FACEPLATE SPINDLE YADMBS35 35mm 16mm Split 8mm YADMBS45 45mm 16mm Split 8mm Meets requirements of PAS3621:2011, Secured by Design and PAS24. Supplied with pre-assembled keeps using the patented ‘uni-packer’ system for fast, easy and reliable installation. Rounded ends for safe installation. The BS version of the Doormaster features a stronger gearbox and hook with anti drill plates, stronger keeps and a thicker faceplate. Meets Secured by Design & PAS24. 3 piece lock. 3 part keeps and uni-packer system. x2 Allen keys. Fixing screws pack. Split spindle SPECIFICATION: ✓✓ Max top hook to spindle: 820mm Min top hook to spindle: 385mm Max bottom hook to spindle: 845mm Min bottom hook to spindle: 408mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 239

Multipoint Door Locks Multipoint Door Locks Yale British Standard - without rollers British Standard Version. Timber & Composite doors ORDER CODE BACKSET FACEPLATE SPINDLE PAS3621:2011 YADMBS35TIM 35mm 16mm Split 8mm YADMBS45TIM 45mm 16mm Split 8mm YADMBS2045 45mm 20mm Split 8mm Meets requirements of PAS3621:2011, Secured by Design and PAS24. Supplied with pre-assembled keeps using the patented ‘uni-packer’ system for fast, easy and reliable installation. Rounded ends for safe installation. The BS version of the Doormaster features a stronger gearbox and hook with anti drill plates, stronger keeps and a thicker faceplate. Meets Secured by Design & PAS24. 3 piece lock. 3 part keeps and uni-packer system. x2 Allen keys. Fixing screws pack. Split spindle. SPECIFICATION: ✓✓ Max top hook to spindle: 820mm Min top hook to spindle: 385mm Max bottom hook to spindle: 845mm Min bottom hook to spindle: 408mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 240

Multipoint Door Locks Thunderbolt Universal Multipoint Door Locks ORDER CODE BACKSET FACEPLATE SPINDLE 4981961 35mm 16mm Split 8mm 4981962 45mm 20mm Split 8mm Angled deadbolts and often does not require a replacement keep when replacing an existing Winkhaus lock. Capable of replacing locks from 1300mm to 2240mm. 3 piece lock. SPECIFICATION: ✓✓ Max top thunderbolt to spindle: 775mm Min top thunderbolt to spindle: 485mm Max bottom thunderbolt to spindle: 795mm Min bottom thunderbolt to spindle: 515mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 241

Multipoint Door Locks Multipoint Door Locks 6135 2 Roller 2 Mushroom Repair Lock Universal for UPVC doors ORDER CODE BACKSET FACEPLATE SPINDLE 6135KIT 35mm 16mm Split 8mm Universal 1 piece replacement solution. Fits conventional 16mm wide Euro groove, with 35mm backset. Features adjustable rollers for enhanced performance and weather sealing, and mushrooms for anti-separation with adjustable keep plates 1 piece lock and keep set. Fixing screws pack. Set of packers. SPECIFICATION: ✓✓ Max distance between mushrooms: 1185mm Min distance between mushrooms: 621mm Max distance between rollers: 1897mm Min distance between rollers: 1333mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS 242

Multipoint Door Locks 6345 2 Hook Repair Lock Multipoint Door Locks Suits Timber & Composite Doors ORDER CODE BACKSET FACEPLATE SPINDLE 6345KIT 45mm 20mm Split 8mm This ERA lock is designed for remedial work on timber and composite doors and features 2 hooks. Features a 20mm faceplate and 45mm backset. It uses twin high security hooks for anti separation resistance with a non handed keep set. 3 piece lock and keep set. Fixing screws pack. Set of packers. SPECIFICATION: ✓✓ Max top hook to spindle: 816mm Min top hook to spindle: 360mm Max bottom hook to spindle: 871mm Min bottom hook to spindle: 415mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS Order Code Colour Multipoint Lock Handle V-HAN92W V-HAN92S V-HAN92C V-HAN92B 243

Multipoint Door Locks Multipoint Door Locks 6735 2 Hook 2 Roller Repair Lock Suits UPVC Doors ORDER CODE BACKSET FACEPLATE SPINDLE 6735KIT 35mm 16mm Split 8mm The 2 hook, 2 roller lock offers both security and weather sealing in a quick to fit, croppable lock. Designed to replace most multi point locks in the UPVC UK market. 3 piece lock and keep set. Fixing screws pack. Set of packers. SPECIFICATION: ✓✓ Max top hook to spindle: 816mm Min top hook to spindle: 360mm Max bottom hook to spindle: 870mm Min bottom hook to spindle: 450mm ✓✓ Centres: 92mm Multipoint Repair Locks ASSOCIATED PRODUCTS Order Code Colour Multipoint Lock Handle V-HAN92W V-HAN92S V-HAN92C V-HAN92B 244

Fuhr Overnight Lock Multipoint Locks Multipoint Door Locks 16mm faceplate - Lift Lever Fuhr Overnight Lock 24mm faceplate - Lift Lever ✓✓ Faceplate: 16mm ✓✓ Centres: 92mm ✓✓ Faceplate: 24mm ✓✓ Spindle: Single 8mm ✓✓ Centres: 92mm ✓✓ Operation: Lift lever ✓✓ Spindle: Single 8mm ✓✓ Operation: Lift lever ORDER CODE BACKSET ORDER CODE BACKSET FU85625 25mm FU85735 35mm FU85628 30mm FU85745 45mm FU85635 35mm FU85645 45mm Overnight Lock to Suit Old Style GU Locks Lockmaster Overnight Lock 16mm faceplate - Lift Lever 16mm faceplate - Double Spindle ✓✓ Faceplate: 16mm ✓✓ Faceplate: 16mm Overnight Locks ✓✓ Centres: 92mm ✓✓ Centres: 62/92mm ✓✓ Spindle: Single 8mm ✓✓ Spindle: Double 8mm ✓✓ Operation: Lift lever ✓✓ Operation: Double spindle nightlatch ORDER CODE BACKSET ORDER CODE BACKSET YADGOL35 35mm YADMOL35 35mm YADMOL45 45mm Lockmaster Overnight Lock Millenco Mantis 1 Overnight Lock 20mm faceplate - Double Spindle 16mm faceplate - Double Spindle ✓✓ Faceplate: 20mm ✓✓ Faceplate: 16mm ✓✓ Centres: 62/92mm ✓✓ Centres: 86/117mm ✓✓ Spindle: Double 8mm ✓✓ Spindle: Double 8mm ✓✓ Operation: Double spindle nightlatch ✓✓ Operation: Double spindle nightlatch ORDER CODE BACKSET ORDER CODE BACKSET YADMOL4520 45mm MILLOV 35mm 245

Multipoint Door Locks Multipoint Locks Winkhaus Overnight Lock Winkhaus Overnight Lock 16mm faceplate - Lift Lever 16mm faceplate - Split Spindle ✓✓ Faceplate: 16mm - Lift lever ✓✓ Faceplate: 16mm - Split spindle ✓✓ Centres: 92mm ✓✓ Centres: 92mm ✓✓ Spindle: Single 8mm ✓✓ Spindle: Split 8mm ✓✓ Operation: Lift lever ✓✓ Operation: Split spindle ORDER CODE BACKSET ORDER CODE BACKSET 1605760 35mm 1607720 45mm Yale Doormaster YS170 Overnight Lock Yale Doormaster YS170 Overnight Lock 16mm faceplate - Split Spindle 20mm faceplate - Split Spindle Overnight Locks ✓✓ Faceplate: 16mm ✓✓ Faceplate: 20mm ✓✓ Centres: 92mm ✓✓ Centres: 92mm ✓✓ Spindle: Split 8mm ✓✓ Spindle: Split 8mm ✓✓ Operation: Split spindle ✓✓ Operation: Split spindle ORDER CODE BACKSET ORDER CODE BACKSET YADYOL35 35mm YADYOL4520 45mm YADYOL45 45mm Roto MVD340 Overnight Lock 16mm faceplate - Lift Lever ✓✓ Faceplate: 16mm ✓✓ Centres: 92mm ✓✓ Spindle: Single 8mm ✓✓ Operation: Lift lever ORDER CODE BACKSET MVD340ON35 35mm 246

ABT Gibbons Gearbox with snib Multipoint Locks Multipoint Locks Predominantly used on aluminium profiles ABT Gibbons Gearbox without snib 22mm faceplate supplied. Comes with snib. Predominantly used on UPVC profiles Faceplate not supplied. 22mm forend. No snib. ✓✓ (HxW): 146mm x 50mm ✓✓ (HxW): 146mm x 50mm ✓✓ Spindle: Double spindle ✓✓ Spindle: Double spindle ORDER CODE BACKSET SPINDLE PZ (MM) ORDER CODE BACKSET SPINDLE PZ (MM) 2018002 32mm 8mm Double 48 / 87 2019002 32mm 8mm Double 48 / 87 Asgard Gearbox Avantis Gearbox Also known as Yale. Used by Anglian Windows This distinctive model has a deadbolt above the latch ✓✓ (HxW): 212mm x 60mm ✓✓ (HxW): 212mm x Backset + 15mm ✓✓ Spindle: Double spindle ✓✓ Spindle: Double spindle ORDER CODE BACKSET SPINDLE PZ (MM) ORDER CODE BACKSET SPINDLE PZ (MM) Multipoint Gearboxes ASGARDCASE45 45mm 8mm Double 92 / 70 AVCASE35 35mm 8mm Double 92 / 70 AVCASE45 45mm 8mm Double 92 / 70 Cego Gearbox Cego Replacement Gearbox New style version Deadbolt case Also known as ERA. Features a narrow deadbolt Also known as Zenith, Bowater or ✓✓ (HxW): 220mm x 55mm Staybrite. Some versions of Staybrite ✓✓ Spindle: Split spindle cases have different connectors and will not interchange with the CEGOCASE35 ✓✓ (HxW): 234mm x 52mm ✓✓ Spindle: Double spindle ORDER CODE BACKSET SPINDLE PZ (MM) ERACASE35THIN 35mm 8mm Split 92 Cego Top/Bottom Replacement Hook Case Only Hook case shell to suit old style Cego locks Outer hook shell only supplied. The existing hook, drive gear and smiley face cover must be re-used. Supplied without screws ✓✓ (HxW): 100mm x 50mm ORDER CODE ORDER CODE BACKSET SPINDLE PZ (MM) CEGOHOOK CEGOCASE35 35mm 8mm Double 92 / 70 247

Multipoint Locks Multipoint Locks ERA Gearbox Deadbolt version Almost all ERA multipoints can be interchanged with a deadbolt, hookbolt or Vectis gearbox. Also known as Fab&Fix, Spartan, Westward and Duraflex, Sapa or Saracen ✓✓ (HxW): 220mm x Backset + 20mm ✓✓ Spindle: Split spindle ORDER CODE BACKSET SPINDLE PZ (MM) ERACASE30 30mm 8mm Split 92 ERACASE35 35mm 8mm Split 92 ERACASE45 45mm 8mm Split 92 ERA Gearbox ERA Slave Gearbox Hookbolt version Slave door gearbox ✓✓ (HxW): 220mm x Backset + 20mm ✓✓ (HxW): 220mm x Backset + 20mm ✓✓ Spindle: Split spindle ✓✓ Spindle: Split spindle Multipoint Gearboxes ORDER CODE BACKSET SPINDLE PZ (MM) ORDER CODE BACKSET SPINDLE PZ (MM) ERAHOOKCASE35 35mm 8mm Split 92 ERASLAVE35 35mm 8mm Split 92 ERA Vectis Gearbox ERA Vectis Gearbox Deadbolt version Hookbolt version Vectis cases are interchangeable with any ERA Vectis cases are interchangeable with any ERA multipoint lock and allow for mortice locking on multipoint lock and allow for mortice locking multipoint locks. Supplied with 3 keys. Can be on multipoint locks. Supplied with 3 keys. Can keyed alike in house. be keyed alike in house. ✓✓ (HxW): 220mm x Backset + 20mm ✓✓ (HxW): 220mm x 55mm ✓✓ Spindle: Split spindle ✓✓ Spindle: Split spindle ORDER CODE BACKSET SPINDLE PZ (MM) ORDER CODE BACKSET SPINDLE PZ (MM) VECTISCASE35 35mm 8mm Split 92 VECTISHOOKCASE 35mm 8mm Split 92 VECTISCASE45 45mm 8mm Split 92 ERA Vectis Slave Gearbox Fuhr Gearbox Split spindle version Slave lock version ✓✓ (HxW): 194mm x Backset + 15mm Vectis cases are interchangeable with any ERA ✓✓ Spindle: Split spindle multipoint lock and allow for mortice locking on multipoint locks. Supplied with 3 keys. Can be keyed alike in house. ✓✓ (HxW): 220mm x Backset + 20mm ✓✓ Spindle: Lift lever ORDER CODE BACKSET SPINDLE PZ (MM) ORDER CODE BACKSET SPINDLE PZ (MM) VECTISSLAVECASE 35mm 8mm Single 92 FUHRCASE30SS 30mm 8mm Split 92 FUHRCASE35SS 35mm 8mm Split 92 248