Embedded Internet of Things

FiO boards and Waijung Blockset is for anyone who needs to create an electronic control boardbut don't know how to write a program for it. If want to bring in real world data from any kind ofsensors into a PC, control external hardware from a PC, create a stand-alone system for any kindapplications such as a data logger, automation, or signal processing system, monitor and controlanything via internet.Then FiO boards and Waijung Blockset is definitely for you.All you need is Matlab, Waijung Blockset and FiO evaluation board. No need to write a single lineof code.FiO Mote - ST Based on ARM Cortex-M0 STM32F072CB MCU o 48MHz CPU Frequency Max o 128 KB Flash o 16 KB RAM o 37 GPIO o Timers: 1 Advanced, 6 General Purpose, 2 Basic o Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC o 10 Channels 12-bits ADC o 2 Channels 12-bits DAC o 2.0 - 3.6 V All IO pins available via pin headers upto 37 pins Pin compatible with FiO Glide and other stackable add-on modules, for examples; o Temperture/Humidity/Pressure/Light Sensors module o Current sense module (to aid low power design) o Power supply module o Motor driver module Onboard 8MHz crystal (for HSE clock) SWD Debugger port available Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion)

Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 TargetFiO Glide Based on ARM Cortex-M0 nRF51422 MCU o 16MHz CPU Frequency Max o 256 KB Flash (without Aimagin Bootloader and S310 ANT/BLE Soft Device) o 128 KB Flash (with Aimagin Bootloader and SoftDevice) o 16 KB RAM o 31 GPIO o 2.4 GHz RF Transceiver upto 2Mbps data rates o Timers: 1 x 32-bits, 2 x 16-bits o Comms: SPI, I2C, USART, AES, RTC, Quadrature Decoder o 8 Channels 10-bits ADC o 1.8 - 3.6 V Approximate Range (with default short antenna): o Outdoor line-of-site: 100 m o Indoor between different rooms with wall: 40 m All IO pins available via pin headers upto 31 pins Pin compatible with FiO Mote and other stackable add-on modules, for examples; o Temperture/Humidity/Pressure/Light Sensors module o Current sense module (to aid low power design) Power supply module Motor driver module Onboard RTC crystal SWD Debugger port available Program via UART using Aimagin bootloader (aMG USB Connect required for USB-to- serial conversion) Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and nRF51 Target More background informationFiO Mote - ST Starter PackThe starter pack include: 1x FiO Mote - ST 1x aMG USB Connect 1x aMG PWS 3V3/5V v2

1x USB CableAbout FiO Mote - ST Based on ARM Cortex-M0 STM32F072CB MCU o 48MHz CPU Frequency Max o 128 KB Flash o 16 KB RAM o 37 GPIO o Timers: 1 Advanced, 6 General Purpose, 2 Basic o Comms: 2 SPI, 2 I2C, 4 USART (+LIN), 1 CAN, 1 USB, 1 CEC o 10 Channels 12-bits ADC o 2 Channels 12-bits DAC o 2.0 - 3.6 V All IO pins available via pin headers upto 37 pins Pin compatible with FiO Glide and other stackable add-on modules, for examples; o Temperture/Humidity/Pressure/Light Sensors module o Current sense module (to aid low power design) o Power supply module o Motor driver module Onboard 8MHz crystal (for HSE clock) SWD Debugger port available Program via built-in STMicroelectronics' UART IAP Protocol (aMG USB Connect required for USB-to-serial conversion) Support Automatic Compile and Download when working with Matlab & Simulink, Waijung Blockset, and STM32F0 Target https://www.aimagin.com