Complete ReliaMark Catalog

Retaining Ring Packs Shaft External Snap Rings Groove Ring Item Pack Qty Decimal (Ds) Fraction (Ds) Free Inside Radial Wall Thickness (T) Diameter Depth (d) Width Diameter Thickness (S) (Dg) (W)SH0215PKRM 5 2.156 2-5/32 (Df) .078 .062SH0225PKRM 5 2.250 2-1/4 Min / Max .078 2.032 .065 .086SH0231PKRM 5 2.312 2-5/16 1.993 .078 2.120 .067 .086SH0237PKRM 5 2.375 2-3/8 2.081 .113 / .212 .078 2.178 .068 .086SH0243PKRM 5 2.438 2-7/16 2.139 .116 / .220 .078 2.239 .069 .086SH0250PKRM 5 2.500 2-1/2 2.197 .118 / .222 .078 2.299 .070 .086SH0255PKRM 5 2.559 65mm 2.255 .119 / .224 .078 2.360 .070 .086SH0262PKRM 5 2.625 2-5/8 2.313 .120 / .228 .078 2.419 .072 .086SH0268PKRM 3 2.688 2-11/16 2.377 .122 / .232 .078 2.481 .073 .086SH0275PKRM 3 2.750 2-3/4 2.428 .125 / .238 .093 3.541 .074 .086SH0287PKRM 3 2.875 2-7/8 2.485 .127 / .242 .093 2.602 .077 .103SH0293PKRM 3 2.938 2-15/16 2.543 .129 / .246 .093 2.721 .079 .103SH0300PKRM 3 3.000 2.659 .131 / .248 .093 2.779 .081 .103 3 2.717 .133 / .256 2.838 .103 2.775 .136 / .260 .138 / .264

Roller Chain – ANSIReliaMark® offers standard-duty roller chainin ANSI sizes ranging from #35 through #120 in bothsingle- and double-strand configurations. Each size isavailable in packaged lengths of 10, 50 and 100 feet.The quality and reliability of our roller chain offerMRO customers a high-value alternative forgeneral-duty applications.Standard-duty Roller Chain, ReliaMark products are distributed exclusivelyAbove-standard Performance through Kaman Industrial Technologies. For more detailed information, visit reliamark.net. For help cross-referencingReliaMark roller chain is produced to meet stringent replacement products, or for assistance with specifyingquality specifications for materials and workmanship, en- roller chain by working load and application, contact yoursuring that chain length, heat treatment and tensile strength local Kaman Industrial Technologies sales representative atare uniform and consistent. ReliaMark roller chain is 800-526-2626 or visit www.kamandirect.com.manufactured from carbon steel to meet or exceed ANSIB29.1 standards. Components are case-hardened for wearresistance and through-hardened for toughness. To selectReliaMark roller chain according to ANSI size or pitch,please refer to the chart on the back of this sheet. Your local ReliaMark distributor:Visit www.reliamark.net

Standard-Duty Link MinimumRoller Chain Part ANSI Pitch Roller Roller Pin Plate Weight TensileBuilt in accordance with NumberANSI B29.1. Number Inches Width Diam. Diam. Thickness C R K per foot Strength C 35RIV-100FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760 PITCH 35RIV-50FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760 35RIV-10FT-RM 35 0.38 3/16 *.200 0.141 0.050 0.56 0.50 0.210 1760 35-2RIV-50FT-RM 35-2 0.38 3/16 *.200 0.141 0.050 0.96 0.90 0.399 0.450 3520 35-2RIV-10FT-RM 35-2 0.38 3/16 *.200 0.141 0.050 0.96 0.90 0.399 0.450 3520 40RIV-100FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125 40RIV-50FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125 40RIV-10FT-RM 40 0.50 5/16 0.312 0.156 0.060 0.72 0.67 0.410 3125 40-2RIV-100FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250 40-2RIV-50FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250 40-2RIV-10FT-RM 40-2 0.50 5/16 0.312 0.156 0.060 1.29 1.24 0.566 0.800 6250 50RIV-100FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880 50RIV-50FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880 50RIV-10FT-RM 50 0.63 3/8 0.400 0.200 0.080 0.89 0.83 0.680 4880 50-2RIV-50FT-RM 50-2 0.63 3/8 0.400 0.200 0.080 1.60 1.55 0.713 1.320 9760 50-2RIV-10FT-RM 50-2 0.63 3/8 0.400 0.200 0.080 1.60 1.55 0.713 1.320 9760 ROLLER 60RIV-100FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030 DIAMETERROLLER 60RIV-50FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030WIDTH Single-Strand 60RIV-10FT-RM 60 0.75 1/2 0.469 0.234 0.094 1.11 1.04 0.990 7030 R 60-2RIV-50FT-RM 60-2 0.75 1/2 0.469 0.234 0.094 2.01 1.94 0.897 1.950 14060 60-2RIV-10FT-RM 60-2 0.75 1/2 0.469 0.234 0.094 2.01 1.94 0.897 1.950 14060C 80RIV-100FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500K 80RIV-50FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500 80RIV-10FT-RM 80 1.00 5/8 0.625 0.312 0.125 1.44 1.32 1.730 12500 80-2RIV-50FT-RM 80-2 1.00 5/8 0.625 0.312 0.125 2.59 2.47 1.153 3.370 25000 80-2RIV-10FT-RM 80-2 1.00 5/8 0.625 0.312 0.125 2.59 2.47 1.153 3.370 25000 100RIV-100FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530 100RIV-50FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530 100RIV-10FT-RM 100 1.25 3/4 0.750 0.375 0.156 1.73 1.61 2.510 19530 100-2RIV-50FT-RM 100-2 1.25 3/4 0.750 0.375 0.156 3.14 3.02 1.408 4.910 39060 PITCH 100-2RIV-10FT-RM 100-2 1.25 3/4 0.750 0.375 0.156 3.14 3.02 1.408 4.910 39060 120RIV-50FT-RM 120 1.50 1 0.875 0.437 0.187 2.14 2.00 3.690 28125 120RIV-10FT-RM 120 1.50 1 0.875 0.437 0.187 2.14 2.00 3.690 28125 120-2RIV-50FT-RM 120-2 1.50 1 0.875 0.437 0.187 3.93 3.79 1.789 7.350 56250 120-2RIV-10FT-RM 120-2 1.50 1 0.875 0.437 0.187 3.93 3.79 1.789 7.350 56250 * Chains are rollerless — dimension shown is bushing size ROLLER Dimensions are in inches and pounds Distributed exclusively by DIAMETER ROLLER WIDTH Double-StrandRFORM # 70313 ©2009 Kaman Industrial Technologies Corporation. All rights reserved. (800) 526-2626 www.kamandirect.com

Roller Chain – MetricReliaMark® offers standard-duty metric rollerchain in ISO sizes ranging from 06B to 20B in bothsingle- and double-strand configurations. ReliaMarkmetric chain sizes are manufactured in compliance withBritish Standard specifications and are available in10 foot lengths. The quality and reliability of our rollerchain offer MRO customers a high-value alternative forgeneral-duty applications.Standard-duty Roller Chain, ReliaMark products are distributed exclusivelyAbove-standard Performance through Kaman Industrial Technologies. For more detailed information, visit reliamark.net. For helpReliaMark British Standard roller chain is produced to cross-referencing replacement products, or formeet stringent quality specifications for materials and assistance with specifying roller chain by working loadworkmanship, ensuring that chain length, heat treatment and application, contact your local Kaman Industrialand tensile strength are uniform and consistent. British Technologies sales representative at 800-526-2626Standard roller chain from ReliaMark is manufactured or visit www.kamandirect.com.from carbon steel to meet or exceed DIN 8171, ISO 606and BS228 standards. Components are case-hardened forwear resistance and through-hardened for toughness. Toselect ReliaMark roller chain according to ANSI size orpitch, please refer to the chart on the back of this sheet. Your local ReliaMark distributor:Visit www.reliamark.net

Standard-Duty Available British Standard Chain ConfigurationsRoller Chain MinimumBuilt in accordancewith DIN 8171, ISO 606 ISO Roller Roller Pin Weight Tensileand BS228 standards. Part Number Number Pitch Width Diam. Diam. T t C R K per foot Strength C t 06B1 RIV-10FT-RM *06B-1 0.38 0.23 0.25 0.13 0.05 0.04 0.66 0.53 .... 0.30 2000 06B2 RIV-10FT-RM *06B-2 0.38 0.23 0.25 0.13 0.05 0.04 1.07 0.94 0.40 0.54 3800 PITCH 08B1 RIV-10FT-RM 08B-1 0.50 0.31 0.34 0.18 0.06 0.06 0.82 0.67 .... 0.50 4000 08B2 RIV-10FT-RM 08B-2 0.50 0.31 0.34 0.18 0.06 0.06 1.37 1.22 0.55 0.95 7000 10B1 RIV-10FT-RM 10B-1 0.63 0.38 0.40 0.20 0.06 0.06 0.93 0.77 .... 0.64 5000 10B2 RIV-10FT-RM 10B-2 0.63 0.38 0.40 0.20 0.06 0.06 1.59 1.43 0.65 1.26 10000 12B1 RIV-10FT-RM 12B-1 0.75 0.46 0.48 0.23 0.07 0.07 1.08 0.89 .... 0.80 6500 12B2 RIV-10FT-RM 12B-2 0.75 0.46 0.48 0.23 0.07 0.07 1.84 1.66 0.77 1.57 13000 16B1 RIV-10FT-RM 16B-1 1.00 0.67 0.63 0.33 0.16 0.13 1.53 1.32 .... 1.83 9500 16B2 RIV-10FT-RM 16B-2 1.00 0.67 0.63 0.33 0.16 0.13 2.89 2.68 1.26 3.61 19000 20B1 RIV-10FT-RM 20B-1 1.25 0.77 0.75 0.40 0.18 0.14 1.94 1.70 .... 2.61 14500 20B2 RIV-10FT-RM 20B-2 1.25 0.77 0.75 0.40 0.18 0.14 3.38 3.14 1.44 5.15 29000 *Chains are rollerless — dimension shown is bushing size Dimensions are in inches and pounds T ROLLER DIAMETERROLLERWIDTH Single-Strand RC Available British Standard Chain LinksK 06B1 CL-RM CONNECTING LINK 10B1 CL-RM CONNECTING LINK 16B1 CL-RM CONNECTING LINK t 06B1 OL-RM OFFSET LINK 10B1 OL-RM OFFSET LINK 16B1 OL-RM OFFSET LINK 06B2 CL-RM CONNECTING LINK 10B2 CL-RM CONNECTING LINK 16B2 CL-RM CONNECTING LINK 06B2 OL-RM OFFSET LINK 10B2 OL-RM OFFSET LINK 16B2 OL-RM OFFSET LINK 08B1 CL-RM CONNECTING LINK 12B1 CL-RM CONNECTING LINK 20B1 CL-RM CONNECTING LINK 08B1 OL-RM OFFSET LINK 12B1 OL-RM OFFSET LINK 20B1 OL-RM OFFSET LINK 08B2 CL-RM CONNECTING LINK 12B2 CL-RM CONNECTING LINK 20B2 CL-RM CONNECTING LINK 08B2 OL-RM OFFSET LINK 12B2 OL-RM OFFSET LINK 20B2 OL-RM OFFSET LINK PITCH T ROLLER Distributed exclusively by ROLLER DIAMETER (800) 526-2626 WIDTH Double-Strand www.kamandirect.comRFORM # 70356 ©2011 Kaman Industrial Technologies Corporation. All rights reserved.

Extended Pitch Roller ChainReliaMark® offers standard-duty extended pitch rollerchain in both power transmission and conveyor types.Conveyor roller chain is available with both standard andoversized diameter rollers. The quality and reliability ofour roller chain offer MRO customers a high-valuealternative for general-duty applications. Sizes areavailable in packaged lengths of 10, 50 and 100 feet.Standard-duty Roller Chain, ReliaMark products are distributed exclusivelyAbove-standard Performance through Kaman Industrial Technologies. For more detailed information, visit www.reliamark.com. ForReliaMark extended pitch roller chain is produced help cross-referencing replacement products, or forto meet stringent quality specifications for materials and assistance with specifying extended pitch roller chain byworkmanship, ensuring that chain length, heat treatment working load and application, contact your local Kamanand tensile strength are uniform and consistent. Industrial Technologies sales representative atComponents are case-hardened for wear resistance 800-526-2626 or visit www.kamandirect.com.and through-hardened for toughness. Your local ReliaMark distributor:All ReliaMark extended pitch roller chain is manufac-tured from carbon steel to meet or exceed ASME/ANSIstandards for specific applications – ASME/ANSI B29.3for power transmission chain and ASME/ANSI B29.4 forconveyor chain. To select the correct type and size ofReliaMark extended pitch roller chain, please referto the chart on the back of this sheet.Visit www.reliamark.com

Minimum Pitch Roller Roller Pin Link Plate Weight Tensile Part Number ANSI # (inches) Width Diameter Diameter Thickness C R per foot Strength POWER TRANSMISSION ROLLER CHAINA2040RIV*10FT*RM 2040 1 5/16 .312 .156 .060 .76 .68 .28 3125A2040RIV*50FT*RM 2040 1 5/16 .312 .156 .060 .76 .68 .28 3125A2040RIV*100FT*RM 2040 1 5/16 .312 .156 .060 .76 .68 .28 3125A2050RIV*10FT*RM 2050 1-1/4 3/8 .400 .200 .080 .92 .84 .52 4880A2050RIV*50FT*RM 2050 1-1/4 3/8 .400 .200 .080 .92 .84 .52 4880A2050RIV*100FT*RM 2050 1-1/4 3/8 .400 .200 .080 .92 .84 .52 4880A2060RIV*10FT*RM 2060 1-1/2 1/2 .469 .234 .094 1.11 1.05 .72 7030A2060RIV*50FT*RM 2060 1-1/2 1/2 .469 .234 .094 1.11 1.05 .72 7030A2060RIV*100FT*RM 2060 1-1/2 1/2 .469 .234 .094 1.11 1.05 .72 7030 Standard Diameter Roller CONVEYOR ROLLER CHAINC2040RIV*10FT*RM C2040 1 5/16 .312 .156 .060 .76 .68 .34 3125C2040RIV*50FT*RM C2040 1 5/16 .312 .156 .060 .76 .68 .34 3125C2040RIV*100FT*RM C2040 1 5/16 .312 .156 .060 .76 .68 .34 3125C2050RIV*10FT*RM C2050 1-1/4 3/8 .400 .200 .080 .92 .84 .58 4880C2050RIV*50FT*RM C2050 1-1/4 3/8 .400 .200 .080 .92 .84 .58 4880C2050RIV*100FT*RM C2050 1-1/4 3/8 .400 .200 .080 .92 .84 .58 4880C2060HRIV*10FT*RM C2060H 1-1/2 1/2 .469 .234 .125 1.25 1.18 1.05 7030C2060HRIV*50FT*RM C2060H 1-1/2 1/2 .469 .234 .125 1.25 1.18 1.05 7030C2060HRIV*100FT*RM C2060H 1-1/2 1/2 .469 .234 .125 1.25 1.18 1.05 7030C2080HRIV*10FT*RM C2080H 2 5/8 .625 .312 .156 1.57 1.45 1.40 12500C2080HRIV*50FT*RM C2080H 2 5/8 .625 .312 .156 1.57 1.45 1.40 12500C2080HRIV*100FT*RM C2080H 2 5/8 .625 .312 .156 1.57 1.45 1.40 12500C2100HRIV*10FT*RM C2100H 2-1/2 3/4 .750 .375 .187 1.86 1.74 2.48 24000C2100HRIV*50FT*RM C2100H 2-1/2 3/4 .750 .375 .187 1.86 1.74 2.48 24000C2120HRIV*10FT*RM C2120H 2-1/2 3/4 .750 .375 .187 1.86 1.74 2.48 24000Oversized Diameter Roller C2042RIV*10FT*RM C2042 1 5/16 .625 .156 .060 .76 .68 .50 3125C2042RIV*50FT*RM C2042 1 5/16 .625 .156 .060 .76 .68 .50 3125C2052RIV*10FT*RM C2052 1-1/4 3/8 .750 .200 .080 .92 .84 .81 4880C2052RIV*50FT*RM C2052 1-1/4 3/8 .750 .200 .080 .92 .84 .81 4880C2062HRIV*10FT*RM C2062H 1-1/2 1/2 .875 .234 .125 1.25 1.18 1.42 7030C2062HRIV*50FT*RM C2062H 1-1/2 1/2 .875 .234 .125 1.25 1.18 1.42 7030C2082HRIV*10FT*RM C2082H 2 5/8 1.125 .312 .156 1.57 1.45 2.13 14500C2082HRIV*50FT*RM C2082H 2 5/8 1.125 .312 .156 1.57 1.45 2.13 14500Power Transmission Roller Chain Part Number Link Type Part Number Link TypeConveyor Chain: Standard Rollers A2040CLRM Connecting Link C2052RLRM Roller Link A2040OLRM Offset Link C2060HCLRM Connecting Link A2050CLRM Connecting Link C2060HOLRM Offset Link A2050OLRM Offset Link C2060HRLRM Roller Link A2060CLRM Connecting Link C2062HCLRM Connecting Link A2060OLRM Offset Link C2062HOLRM Offset Link C2040CLRM Connecting Link C2062HRLRM Roller Link C2040OLRM Offset Link C2080HCLRM Connecting Link C2040RLRM Roller Link C2080HOLRM Offset Link C2042CLRM Connecting Link C2080HRLRM Roller Link C2042OLRM Offset Link C2082HCLRM Connecting Link C2042RLRM Roller Link C2082HOLRM Offset Link C2050CLRM Connecting Link C2082HRLRM Roller Link C2050OLRM Offset Link C2100HCLRM Connecting Link C2052CLRM Connecting Link C2120HCLRM Connecting Link C2052OLRM Offset Link C2120HOLRM Offset LinkConveyor Chain: Oversized RollersFORM # 70387 ©2012 Kaman Industrial Technologies Corporation. All rights reserved.

Stainless SteelRoller ChainsReliaMark® provides a wide selection ofcorrosion-resistant stainless steel roller chains insingle- and double-strand ANSI sizes # 25 – 80;extended pitch conveyor standard- and large-rollerANSI sizes #2040 – 2082; and British Standard single-strandsizes 06-12. ANSI sizes are available in packaged lengthsof 10, 50 and 100 feet and British Standard chains arepackaged in 10-foot lengths. Specifically designed for food andbeverage, pharmaceutical and other washdown applications,ReliaMark washdown chains are distributed exclusivelythrough Kaman Industrial Technologies.Application-Specific Roller Chains for Please see the charts on the following pages for a Washdown Environments quick overview of available styles and sizes. Full product specifications, warranty and mountingReliaMark corrosion-resistant roller chains are instructions are available online at www.reliamark.commanufactured to meet stringent quality specifications with links to the Kaman online ordering system forfor materials and workmanship, ensuring chain direct purchase. For help with cross-referencinglength, heat treatment and tensile strength are replacement parts, contact your local Kaman Industrialuniform and consistent ReliaMark roller chains Technologies sales representative at 800-526-2626 orare constructed of AISI 304 stainless steel to make visit www.kamandirect.com.them ideal for the demanding standards establishedfor food and beverage, pharmaceutical and similarproduction environments. Your local ReliaMark distributor:Visit www.reliamark.com

Corrosion-Resistant Roller Chain ANSI Stainless Steel Roller Chain Part Number ANSI Chain Inside Roller Pin Link C R Weight Average Chain Pitch Width Diameter Diameter Plate K per Ultimate Number Thickness foot Strength 25SSRIV*100FT*RM 25SS 0.250 1/8 0.130 0.091 0.030 0.340 0.300 0.10 700 25SSRIV*10FT*RM 25SS 0.250 1/8 0.130 0.091 0.030 0.340 0.300 0.10 700 25SSRIV*50FT*RM 25SS 0.250 1/8 0.130 0.091 0.030 0.340 0.300 0.10 700 35SSRIV*100FT*RM 35SS 0.375 3/16 0.200 0.141 0.050 0.510 0.472 0.22 1,400 35SSRIV*10FT*RM 35SS 0.375 3/16 0.200 0.141 0.050 0.510 0.472 0.22 1,400 35SSRIV*50FT*RM 35SS 0.375 3/16 0.200 0.141 0.050 0.510 0.472 0.22 1,400 40SSRIV*100FT*RM 40SS 0.500 5/16 0.312 0.156 0.060 0.691 0.650 0.42 2,800Single-Strand 40SSRIV*10FT*RM 40SS 0.500 5/16 0.312 0.156 0.060 0.691 0.650 0.42 2,800 40SSRIV*50FT*RM 40SS 0.500 5/16 0.312 0.156 0.060 0.691 0.650 0.42 2,800 50SSRIV*100FT*RM 50SS 0.625 3/8 0.400 0.200 0.080 0.856 0.800 0.68 4,600 50SSRIV*10FT*RM 50SS 0.625 3/8 0.400 0.200 0.080 0.856 0.800 0.68 4,600 50SSRIV*50FT*RM 50SS 0.625 3/8 0.400 0.200 0.080 0.856 0.800 0.68 4,600 60SSRIV*100FT*RM 60SS 0.750 1/2 0.469 0.234 0.094 1.059 1.000 0.97 6,200 60SSRIV*10FT*RM 60SS 0.750 1/2 0.469 0.234 0.094 1.059 1.000 0.97 6,200 60SSRIV*50FT*RM 60SS 0.750 1/2 0.469 0.234 0.094 1.059 1.000 0.97 6,200 80SSRIV*100FT*RM 80SS 1.000 5/8 0.625 0.312 0.125 1.390 1.275 1.61 10,600 80SSRIV*10FT*RM 80SS 1.000 5/8 0.625 0.312 0.125 1.390 1.275 1.61 10,600 80SSRIV*50FT*RM 80SS 1.000 5/8 0.625 0.312 0.125 1.390 1.275 1.61 10,600 402SSRIV*10FT*RM 40-2SS 0.500 5/16 0.312 0.156 0.060 1.270 1.220 0.567 0.80 5,600 502SSRIV*10FT*RM 50-2SS 0.625 3/8 0.400 0.200 0.080 1.590 1.510 0.712 1.37 9,200Double-Strand 602SS2RIV*10FT*RM 60-2SS 0.750 1/2 0.469 0.234 0.094 1.950 1.850 0.898 2.03 12,400 * Chains are rollerless — dimension shown is bushing size Dimensions are in inches and pounds©2014 Kaman Industrial Technologies Corporation. All rights reserved.

Corrosion-Resistant Roller Chain Extended Pitch Conveyor Series Stainless Steel Part Number ANSI Chain Inside Roller Pin Link C Weight Average Standard Roller Chain Pitch Width Diameter Diameter Plate R per Ultimate Number Thickness foot Strength C2040SSRIV*100FT*RM C2040SS 1.000 5/16 0.312 0.156 0.060 0.691 0.650 0.34 2,790 C2040SSRIV*10FT*RM C2040SS 1.000 5/16 0.312 0.156 0.060 0.691 0.650 0.34 2,790 C2040SSRIV*50FT*RM C2040SS 1.000 5/16 0.312 0.156 0.060 0.691 0.650 0.34 2,790 C2050SSRIV*100FT*RM C2050SS 1.250 3/8 0.400 0.200 0.080 0.856 0.800 0.56 4,560 C2050SSRIV*10FT*RM C2050SS 1.250 3/8 0.400 0.200 0.080 0.856 0.800 0.56 4,560 C2050SSRIV*50FT*RM C2050SS 1.250 3/8 0.400 0.200 0.080 0.856 0.800 0.56 4,560Standard Roller C2060HSSRIV*100FT*RM C2060HSS 1.500 1/2 0.469 0.234 0.094 1.248 1.172 1.01 6,150 C2060HSSRIV*10FT*RM C2060HSS 1.500 1/2 0.469 0.234 0.094 1.248 1.172 1.01 6,150 C2060HSSRIV*50FT*RM C2060HSS 1.500 1/2 0.469 0.234 0.094 1.248 1.172 1.01 6,150 C2080HSSRIV*10FT*RM C2080HSS 2.000 5/8 0.625 0.312 0.125 1.512 1.398 1.67 10,590 C2080HSSRIV*50FT*RM C2080HSS 2.000 5/8 0.625 0.312 0.125 1.512 1.398 1.67 10,590 Large Roller C2042SS 1.000 5/16 0.625 0.156 0.060 0.691 0.650 0.58 2,790 C2042SSRIV*10FT*RM C2042SS 1.000 5/16 0.625 0.156 C2042SSRIV*50FT*RM C2052SS 1.250 3/8 0.750 0.200 0.060 0.691 0.650 0.58 2,790 C2052SSRIV*10FT*RM C2052SS 1.250 3/8 0.750 0.200 C2052SSRIV*50FT* RM 0.080 0.856 0.800 0.88 4,560 0.080 0.856 0.800 0.88 4,560 C2062HSSRIV*10FT*RM C2062HSS 1.500 1/2 0.875 0.234 0.094 1.248 1.172 1.01 6,150 0.234 C2062HSSRIV*50FT*RM C2062HSS 1.500 1/2 0.875 0.312 0.094 1.248 1.172 1.01 6,150 0.312 C2082HSSRIV*10FT*RM C2082HSS 2.000 5/8 1.125 0.125 1.512 1.398 2.40 10,590 C2082HSSRIV*50FT*RM C2082HSS 2.000 5/8 1.125 0.125 1.512 1.398 2.40 10,590Large Roller * Chains are rollerless — dimension shown is bushing size Dimensions are in inches and pounds

British Standard Single Strand Stainless Steel Roller Chain Part Number Chain Chain Inside Roller Pin Diameter T t CR Weight Minimum Number Pitch Width Diameter per foot Ultimate Strength06B1SSRIV*10FT*RM 06BSS 0.375 0.225 0.250 0.129 0.049 0.039 0.530 0.500 0.26 1,10008B1SSRIV*10FT*RM 08BSS 0.500 0.305 0.335 0.175 0.060 0.060 0.710 0.660 0.44 2,20010B1SSRIV*10FT*RM 10BSS 0.625 0.380 0.400 0.200 0.065 0.065 0.810 0.750 0.60 3,19012B1SSRIV*10FT*RM 12BSS 0.750 0.460 0.475 0.225 0.070 0.070 0.930 0.880 0.78 3,740 * Chains are rollerless — dimension shown is bushing size Dimensions are in inches and poundsCorrosion-Resistant Roller Chain Single-StrandFORM # 70437 ©2014 Kaman Industrial Technologies Corporation. All rights reserved. Distributed By 800.526.2626 / www.kamandirect.com

Mechanical SealsReliaMark® mechanical pump seals aremanufactured to meet all industry standards forgeneral-duty applications, providing a reliableresource for commonly ordered seals at a highlyaffordable price. These durable, long-lastingseals are designed to reduce maintenance costsand are manufactured with the highest qualitymaterials available in the marketplace.Replacement Mechanical ReliaMark mechanical seals are ideal for a wide rangeSeals in a variety of materials and sizes.­ of applications, including pool and spa pumps, centrifugal pumps and well point pumps. We also provide multi-springReliaMark offers a complete line of drop-in seals to meet your sealing needs.replacement mechanical seals available in over 1,000 ofthe most frequently ordered types and sizes. Seal types ReliaMark products are distributed exclusivelyinclude type 1, 2, 6, 6a, 21, 21a and 2106/G series, all with through Kaman Industrial Technologies. For more detaileda range of shaft diameters from 1/2 to 3 3/4 inches. information, visit reliamark.com. For help cross-referencing replacement parts by brand and product code, or forThe materials of mechanical pump seal construction assistance with specifying seals for industry applications,include, but are not limited to: call Kaman Industrial Technologies at 800-526-2626.• Buna, Viton, EPR and Neoprene Elastomers for all rubber Your local ReliaMark distributor: components• Silicon Carbide, Tungsten Carbide, Ceramic and Ni-Resist stationary seats for O-Ring, Cup and other styles• Carbon, Silicon Carbide and Tungsten Carbide hard-face materials• Stainless steel is standard for all metal components, including rotary and spring. Other alloys are available upon requestVisit www.reliamark.com

MATERIALS ROTATING STATIONARY SEAT TYPE FACE SEAT ELASTOMER TYPE SHAFT DIAMETERS 1 C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8Type 1 2 3/4 2 7/8 3 3 1/4 3 1/2 3 3/4Type 2Type 6 2 C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 7/8 1 1 1/8Type 6AType 21 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 21 C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 2 1/8 2 1/4 2 3/8 2 1/2 2 5/8 2 3/4 2 7/8 3 21A C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 7/8 1 1 1/8 1 1/4 1 3/8 1 1/2 1 5/8 1 3/4 1 7/8 2 6 C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 1 6A C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 1 G C,S,T R,N,S,T B,V,E O,P 1/2 5/8 3/4 1 1 1/8 1 1/4 1 3/8 MATERIALS REFERENCE INDUSTRY CROSS-REFERENCE C = Carbon ReliaMark Type 1 2 21 6 6A 2106/G S = Silicon Letter Type E D C A B G T = Tungsten Number Type 51 52 21 16 68 2106 R = Ceramic N = Ni-resist L = Stainless B = Buna V = Viton E = EPR O = O-Ring P = Cup Type 21A Distributed By Type 2106/G 800.526.2626 / www.kamandirect.comFORM # 70560 ©2015 Kaman Industrial Technologies Corporation. All rights reserved.

Oil SealsReliaMark® radial shaft seals are manufactured tomeet all industry standards for general-duty applications,providing a reliable resource for commonly orderedseals at a highly affordable price.ReliaMark seals are available in over800 of the most frequently ordered typesand sizes in both inch and metricdimensions. The full line includesseals with shaft diameters rangingfrom ¼\" to 9\" for inch seals and15 to 250mm for metric.Contain Oil, Grease and Rising Costs ReliaMark seals are ideal for a wide range ofwith ReliaMark Radial Shaft Seals applications, including agricultural equipment, electric motors, appliances, wheel hubs, power saws, gearReliaMark seals offer tight tolerance for critical reducers and the protection of ball and roller bearings.dimensions, to press-fit snugly into place and properly They offer excellent uniformity in size and materials, givingseal. Single- and double-lip styles are available in both customers the means to contain not only oil and grease,spring-loaded and non-pressured designs. Refer to the but overall maintenance costs.back of this sheet for additional information on theselection of lip styles. ReliaMark products are distributed exclusively through Kaman Industrial Technologies. For more detailedLips are available in three material options, all of information, visit reliamark.net. For help cross-referencingwhich match the quality and durability of high-end replacement parts by brand and product code, or fornational brands: assistance with specifying seals for industry applications, call Kaman Industrial Technologies at 800-526-2626. • BUNA nitrile rubber, the most common choice for general purpose applications. Your local ReliaMark distributor: • Polyacrylate, for applications requiring a seal that can withstand elevated shaft speeds. • Dupont’s Viton® fluoroelastomer, offering added chemical and temperature resistance for the most demanding applications.Visit www.reliamark.net

ReliaMark radial shaft seals are available with inside diameters ranging in size from ¼\" to 9\" for inch seals and15mm to 250mm for metric. To select the correct seal for your application or find the Kaman branch in your area,visit www.reliamark.net.Selecting the Correct Lip MaterialChoose BUNA nitrile rubber for: Choose Polyacrylate for: Choose Viton® fluoroelastomer for:• Shaft rotating speeds up to 1000 fpm • Shaft rotating speed up to 2000 fpm • Shaft rotating speeds up to 3500 fpm• Heat resistance up to 225ºF • Heat resistance up to 302ºF • Heat resistance up to 400ºF• Chemical resistance not required • Not suitable for dry running conditions • Chemical resistance requiredCommon Lip Styles TA: Low-pressure dual lip with garter spring provides protection from contaminants.For a complete list of available lip styles, visit www.reliamark.net Precision-ground metal OD with an additional inner metal case for increased structural SM: Low-pressure single lip with garter spring. rigidity. Precision-ground metal OD with a lead-in chamfer for ease of installation. Internal face of the steel case is fully rubber covered to prevent corrosion.VM: Non-pressure single lip without garter TB: Low-pressure dual lip with garter springspring. Precision-ground metal OD with a provides protection from contaminants.lead-in chamfer for ease of installation. Precision-ground metal OD with a lead-inInternal face of the steel case is fully chamfer for ease of installation.rubber covered to prevent corrosion.SA: Low-pressure single lip with garter spring. TC: Low-pressure dual lip with garter springPrecision-ground metal OD with an additional provides protection from contaminants.inner metal case for increased structural Rubber-covered OD to improve the OD sealingrigidity. ability. Internal face of the steel case is not fully rubber covered.SB: Low-pressure single lip with garter spring. VB: Non-pressure single lip without garterPrecision-ground metal OD with a lead-in spring. Precision-ground metal OD with achamfer for ease of installation. lead-in chamfer for ease of installation. SC: Low-pressure single lip with garter spring. VH: Non-pressure single lip without garter Rubber-covered OD to improve the OD sealing spring provides protection from contaminants. ability. Internal face of the steel case is not Precision-ground metal OD with added fully rubber covered. structural rigidity particularly when there is a large radial seal width. VHY: Non-pressure single lip without garter spring. Precision-ground metal OD with Distributed exclusively by extended case lip for added structural rigidity and better seating, particularly when there is a (800) 526-2626 large radial seal width. www.kamandirect.comFORM # 70312 ©2009 Kaman Industrial Technologies Corporation. All rights reserved.

Shaft CollarsReliaMark® shaft collars are available off the shelfin the most common sizes, ranging in bore or shaftdiameter from 1⁄ 8\" to 3\". Manufactured in SAE 1008 mildsteel, the ReliaMark line includes solid set-screwcollars with a zinc-plated finish as well as one-piece(single-split) and two-piece (double-split) collars witha black oxide finish and socket head cap screws.Affordable New Resource Included in the line are more than 130 frequently orderedfor Replacement Shaft Collars­ types and sizes. For a complete product listing, please refer to the product charts on the back of this sheet.As with all ReliaMark products, our shaft collars aredesigned for high value, providing reliable performance ReliaMark products are distributed exclusivelyat an affordable price. ReliaMark shaft collars are through Kaman Industrial Technologies. For more detailedmanufactured to meet industry standards for use in a information, visit reliamark.com. For help cross-referencingwide range of general-duty applications and are effective replacement parts, or for assistance with specifyingon both hard and soft shafts. Bore tolerances range from shaft collars for industry applications, contact your local+.004/+.001 for bores up to 3-¼\" to +.0075/+.0015 for Kaman Industrial Technologies sales representative atbores over 3-¼\". 800-526-2626.Our one-piece and two-piece collars are designed to fully Your local ReliaMark distributor:engage the shaft without the risk of marring or otherdamage. The recessed screw head ensures trouble-freeoperation free from major projections.Visit www.reliamark.com

Set-Screw Collar PART # PART # BORE WIDTH SET PART # PART # BORE WIDTH SET (SINGLE PACK) (MULTI-PACK) SIZE O.D. WIDTH SCREW (SINGLE PACK) (MULTI-PACK) SIZE O.D. WIDTH SCREW 1 9/16 2-1/2 13/16 3/8-16 SC-12RM SC-12RM*10PK 1/8 3/8 1/4 6-32 SC-156RM 1 5/8 2-1/2 13/16 3/8-16 SC-18RM SC-18RM*10PK 3/16 7/16 1/4 8-32 SC-162RM 1 11/16 2-1/2 13/16 3/8-16 SC-25RM SC-25RM*10PK 1/4 1/2 9/32 10-32 SC-168RM 1 3/4 2-3/4 7/8 1/2-13 SC-31RM SC-31RM*10PK 5/16 5/8 5/16 10-32 SC-175RM 1 13/16 2-3/4 7/8 1/2-13 SC-37RM SC-37RM*10PK 3/8 3/4 3/8 1/4-20 SC-181RM 1 7/8 2-3/4 7/8 1/2-13 SC-43RM SC-43RM*10PK 7/16 7/8 7/16 1/4-20 SC-187RM 1 15/16 3 7/8 1/2-13 SC-50RM SC-50RM*10PK 1/2 1 7/16 1/4-20 SC-193RM SC-56RM SC-56RM*10PK 9/16 1 7/16 1/4-20 SC-200RM 2 3 7/8 1/2-13 SC-62RM SC-62RM*10PK 5/8 1-1/8 1/2 5/16-18 SC-212RM 2 1/8 3 7/8 1/2-13 SC-68RM SC-68RM*10PK 11/16 1-1/4 9/16 5/16-18 SC-218RM 2 3/16 3-1/4 15/16 1/2-13 SC-75RM SC-75RM*5PK 3/4 1-1/4 9/16 5/16-18 SC-225RM 2 1/4 3-1/4 15/16 1/2-13 SC-81RM SC-81RM*5PK 13/16 1-1/2 9/16 5/16-18 SC-231RM 2 5/16 3-1/4 15/16 1/2-13 SC-87RM SC-87RM*5PK 7/8 1-1/2 9/16 5/16-18 SC-237RM 2 3/8 3-1/4 15/16 1/2-13 SC-93RM SC-93RM*5PK 15/16 1-5/8 9/16 5/16-18 SC-243RM 2 7/16 3-1/2 1 1/2-13 SC-100RM SC-100RM*5PK 1 1-5/8 5/8 5/16-18 SC-250RM 2 1/2 3-1/2 1 1/2-13 SC-106RM SC-106RM*5PK 1 1/16 1-3/4 5/8 5/16-18 SC-262RM 2 5/8 3-3/4 1-1/8 1/2-13 SC-112RM SC-112RM*5PK 1 1/8 1-3/4 5/8 5/16-18 SC-268RM 2 11/16 4 1-1/8 1/2-13Bore Tolerance SC-118RM SC-118RM*5PK 1 3/16 2 11/16 3/8-16 SC-275RM 2 3/4 4 1-1/8 1/2-13Bore 1/8 to 3-1/4 +.004/+.001 SC-125RM SC-125RM*5PK 1 1/4 2 11/16 3/8-16 SC-287RM 2 7/8 4-1/4 1-1/8 1/2-13Bore over 3-1/4 +.0075/ +.0015 SC-131RM 1 5/16 2-1/8 11/16 3/8-16 SC-293RM 2 15/16 4-1/4 1-1/8 1/2-13O.D. Tolerance +.000 / -.030 SC-137RM 1 3/8 2-1/8 3/4 3/8-16 SC-300RM SC-143RM 1 7/16 2-1/4 3/4 3/8-16 SC-343RM 3 4-1/4 1-1/8 1/2-13Zinc-Plated Steel SC-150RM 1 1/2 2-1/4 13/16 3/8-16 SC-393RM 3 7/16 4-1/2 1-1/8 1/2-13 3 15/16 5 1-1/8 1/2-13Single-Split Collar PART # PART # BORE WIDTH CLAMP PART # PART # BORE WIDTH CLAMP (SINGLE PACK) (MULTI-PACK) SIZE O.D. WIDTH SCREW (SINGLE PACK) (MULTI-PACK) SIZE O.D. WIDTH SCREW 1 9/16 2-3/8 9/16 1/4-28 1SC-12RM 1SC-12RM*5PK 1/8 1/2 1/4 4-40 1SC-156RM 1 5/8 2-5/8 11/16 5/16-24 1SC-18RM 1SC-18RM*5PK 3/16 5/8 5/16 4-40 1SC-162RM 1 11/16 2-3/4 11/16 5/16-24 1SC-25RM 1SC-25RM*5PK 1/4 11/16 5/16 4-40 1SC-168RM 1 3/4 2-3/4 11/16 5/16-24 1SC-31RM 1SC-31RM*5PK 5/16 11/16 5/16 4-40 1SC-175RM 1 7/8 2-7/8 11/16 5/16-24 1SC-37RM 1SC-37RM*5PK 3/8 7/8 11/32 6-32 1SC-187RM 1 15/16 3 11/16 5/16-24 1SC-43RM 1SC-43RM*5PK 7/16 15/16 3/8 6-32 1SC-193RM 1SC-50RM 1SC-50RM*5PK 1/2 1-1/8 13/32 8-32 1SC-200RM 2 3 11/16 5/16-24 1SC-56RM 1SC-56RM*5PK 9/16 1-1/4 7/16 10-32 1SC-212RM 2 1/8 3-1/4 3/4 5/16-24 1SC-62RM 1SC-62RM*5PK 5/8 1-5/16 7/16 10-32 1SC-218RM 2 3/16 3-1/4 3/4 5/16-24 1SC-68RM 1SC-68RM*5PK 11/16 1-3/8 7/16 10-32 1SC-225RM 2 1/4 3-1/4 3/4 5/16-24 1SC-75RM 1SC-75RM*5PK 3/4 1-1/2 1/2 1/4-28 1SC-231RM 2 5/16 3-1/2 3/4 5/16-24 1SC-81RM 1SC-81RM*5PK 13/16 1-5/8 1/2 1/4-28 1SC-237RM 2 3/8 3-1/2 3/4 5/16-24 1SC-87RM 1SC-87RM*5PK 7/8 1-5/8 1/2 1/4-28 1SC-243RM 2 7/16 3-1/2 3/4 5/16-24 1SC-93RM 1SC-93RM*5PK 15/16 1-3/4 1/2 1/4-28 1SC-250RM 2 1/2 3-3/4 7/8 3/8-24 1SC-100RM 1SC-100RM*5PK 1 1-3/4 1/2 1/4-28 1SC-262RM 2 5/8 3-7/8 7/8 3/8-24 1SC-106RM 1SC-106RM*5PK 1 1/16 1-7/8 1/2 1/4-28 1SC-268RM 2 11/16 4 7/8 3/8-24 1SC-112RM 1SC-112RM*5PK 1 1/8 1-7/8 1/2 1/4-28 1SC-275RM 2 3/4 4 7/8 3/8-24 1SC-118RM 1SC-118RM*5PK 1 3/16 2-1/16 1/2 1/4-28 1SC-287RM 2 7/8 4-1/4 7/8 3/8-24Bore Tolerance 1SC-125RM 1SC-125RM*5PK 1 1/4 2-1/16 1/2 1/4-28 1SC-293RM 2 15/16 4-1/4 7/8 3/8-24Bore 1/8 to 3-1/4 +.004/+.001 1SC-131RM 1 5/16 2-1/8 9/16 1/4-28 1SC-300RM Bore over 3-1/4 +.0075/+.0015 1SC-137RM 1 3/8 2-1/4 9/16 1/4-28 1SC-343RM 3 4-1/4 7/8 3/8-24 1SC-143RM 1 7/16 2-1/4 9/16 1/4-28 1SC-393RM 3 7/16 4-3/4 7/8 3/8-24Black Oxide Steel 1SC-150RM 1 1/2 2-3/8 9/16 1/4-28 3 15/16 5-1/4 7/8 3/8-24Double-Split Collar PART # PART # BORE WIDTH CLAMP PART # PART # BORE WIDTH CLAMP (SINGLE PACK) (MULTI-PACK) SIZE O.D. WIDTH SCREW (SINGLE PACK) (MULTI-PACK) SIZE O.D. WIDTH SCREW 1 9/16 2-3/8 9/16 1/4-28 2SC-12RM 2SC-12RM*5PK 1/8 1/2 1/4 4-40 2SC-156RM 1 5/8 2-5/8 11/16 5/16-24 2SC-18RM 2SC-18RM*5PK 3/16 5/8 5/16 4-40 2SC-162RM 1 11/16 2-3/4 11/16 5/16-24 2SC-25RM 2SC-25RM*5PK 1/4 11/16 5/16 4-40 2SC-168RM 1 3/4 2-3/4 11/16 5/16-24 2SC-31RM 2SC-31RM*5PK 5/16 11/16 5/16 4-40 2SC-175RM 1 7/8 2-7/8 11/16 5/16-24 2SC-37RM 2SC-37RM*5PK 3/8 7/8 11/32 6-32 2SC-187RM 1 15/16 3 11/16 5/16-24 2SC-43RM 2SC-43RM*5PK 7/16 15/16 3/8 6-32 2SC-193RM 2SC-50RM 2SC-50RM*5PK 1/2 1-1/8 13/32 8-32 2SC-200RM 2 3 11/16 5/16-24 2SC-56RM 2SC-56RM*5PK 9/16 1-1/4 7/16 10-32 2SC-212RM 2 1/8 3-1/4 3/4 5/16-24 2SC-62RM 2SC-62RM*5PK 5/8 1-5/16 7/16 10-32 2SC-218RM 2 3/16 3-1/4 3/4 5/16-24 2SC-68RM 2SC-68RM*5PK 11/16 1-3/8 7/16 10-32 2SC-225RM 2 1/4 3-1/4 3/4 5/16-24 2SC-75RM 2SC-75RM*3PK 3/4 1-1/2 1/2 1/4-28 2SC-231RM 2 5/16 3-1/2 3/4 5/16-24 2SC-81RM 2SC-81RM*3PK 13/16 1-5/8 1/2 1/4-28 2SC-237RM 2 3/8 3-1/2 3/4 5/16-24 2SC-87RM 2SC-87RM*3PK 7/8 1-5/8 1/2 1/4-28 2SC-243RM 2 7/16 3-1/2 3/4 5/16-24 2SC-93RM 2SC-93RM*3PK 15/16 1-3/4 1/2 1/4-28 2SC-250RM 2 1/2 3-3/4 7/8 3/8-24 2SC-100RM 2SC-100RM*3PK 1 1-3/4 1/2 1/4-28 2SC-262RM 2 5/8 3-7/8 7/8 3/8-24 2SC-106RM 2SC-106RM*3PK 1 1/16 1-7/8 1/2 1/4-28 2SC-268RM 2 11/16 4 7/8 3/8-24 2SC-112RM 2SC-112RM*3PK 1 1/8 1-7/8 1/2 1/4-28 2SC-275RM 2 3/4 4 7/8 3/8-24 2SC-118RM 2SC-118RM*3PK 1 3/16 2-1/16 1/2 1/4-28 2SC-287RM 2 7/8 4-1/4 7/8 3/8-24Bore Tolerance 2SC-125RM 2SC-125RM*3PK 1 1/4 2-1/16 1/2 1/4-28 2SC-293RM 2 15/16 4-1/4 7/8 3/8-24Bore 1/8 to 3-1/4 +.004/+.001 2SC-131RM 1 5/16 2-1/8 9/16 1/4-28 2SC-300RM Bore over 3-1/4 +.0075/+.0015 2SC-137RM 1 3/8 2-1/4 9/16 1/4-28 2SC-343RM 3 4-1/4 7/8 3/8-24 2SC-143RM 1 7/16 2-1/4 9/16 1/4-28 2SC-393RM 3 7/16 4-3/4 7/8 3/8-24Black Oxide Steel 2SC-150RM 1 1/2 2-3/8 9/16 1/4-28 3 15/16 5-1/4 7/8 3/8-24 Distributed ByFORM # 70314 ©2015 Kaman Industrial Technologies Corporation. All rights reserved. 800.526.2626 / www.kamandirect.com

Stainless Steel Shaft CollarsReliaMark® provides a wide selection of stainless steel shaftcollars specifically designed for food and beverage, pharmaceuticalor other washdown applications. Distributed exclusively throughKaman Industrial Technologies, ReliaMark stainless steel shaftcollars are available off the shelf in the most common sizes, rangingin bore or shaft diameter from 1⁄8\" to 3\". Manufactured in T304stainless steel, the ReliaMark line includes solidset-screw collars, one-piece (single-split)and two-piece (double-split) collarswith socket head cap screws.Affordable New Resource Included in the line are more than 100 frequently orderedfor Corrosion Resistant Shaft Collars­ types and sizes.For a complete product listing, please refer to the product charts on the back of this sheet.As with all ReliaMark products, our stainless steelshaft collars are designed for high value, providing reliable For more detailed information, visit www.reliamark.com.performance at an affordable price. ReliaMark For help cross-referencing replacement parts, or forstainless steel shaft collars are manufactured to meet assistance with specifying shaft collars for industryindustry standards for use in a wide range of washdown applications, contact your local Kaman Industrialapplications and are effective on both hard and soft shafts. Technologies sales representative at 800-526-2626 orBore tolerances range from +.004/+.000 for bores up to 3\". visit www.kamandirect.com.Our one-piece and two-piece collars are designed to fullyengage the shaft without the risk of marring or otherdamage. The recessed screw head ensures trouble-freeoperation free from major projections. Your local ReliaMark distributor:Visit www.reliamark.com

Set-Screw Collar BORE SET BORE SET PART # SIZE O.D. WIDTH SCREW PART # SIZE O.D. WIDTH SCREW SC-12SSRM 1/8\" 3/8\" 1/4\" 6-32 x 1/8 SC-150SSRM 1 1/2\" 2-1/4\" 13/16\" 3/8-16 x 3/8 SC-18SSRM 3/16\" 7/16\" 1/4\" 8-32 x 1/8 SC-156SSRM 1 9/16\" 2-1/2\" 13/16\" 3/8-16 x 3/8 SC-25SSRM 1/4\" 1/2\" 9/32\" 10-32 x 1/8 SC-162SSRM 1 5/8\" 2-1/2\" 13/16\" 3/8-16 x 3/8 SC-31SSRM 5/16\" 5/8\" 5/16\" 10-32 x 1/8 SC-168SSRM 1 11/16\" 2-1/2\" 13/16\" 3/8-16 x 3/8 SC-37SSRM 3/8\" 3/4\" 3/8\" 1/4-20 x 3/16 SC-175SSRM 1 3/4\" 2-3/4\" 7/8\" 1/2-13 x 1/2 SC-43SSRM 7/16\" 7/8\" 7/16\" 1/4-20 x 1/4 SC-181SSRM 1 13/16 2-3/4\" 7/8\" 1/2-13 x 1/2 SC-50SSRM 1/2\" 1\" 7/16\" 1/4-20 x 1/4 SC-187SSRM 1 7/8\" 2-3/4\" 7/8\" 1/2-13 x 1/2 SC-56SSRM 9/16\" 1\" 7/16\" 1/4-20 x 1/4 SC-193SSRM 1 15/16 7/8\" 1/2-13 x 1/2 SC-62SSRM 5/8\" 1-1/8\" 1/2\" 5/16-18 x 1/4 SC-200SSRM 3\" 7/8\" 1/2-13 x 1/2 SC-75SSRM 3/4\" 1-1/4\" 9/16\" 5/16-18 x 1/4 SC-212SSRM 2\" 3\" 7/8\" 1/2-13 x 1/2 SC-81SSRM 13/16\" 1-1/2\" 9/16\" 5/16-18 x 1/4 SC-218SSRM 2 1/8\" 3\" 15/16\" 1/2-13 x 1/2 SC-87SSRM 7/8\" 1-1/2\" 9/16\" 5/16-18 x 5/16 SC-225SSRM 2 3/16\" 3-1/4\" 15/16\" 1/2-13 x 1/2 SC-93SSRM 15/16\" 1-5/8\" 9/16\" 5/16-18 SC-237SSRM 2 1/4\" 3-1/4\" 15/16\" 1/2-13 x 1/2 SC-100SSRM 1\" 1-5/8\" 5/8\" 5/16-18 SC-243SSRM 2 3/8\" 3-1/4\" 1/2-13 x 1/2 SC-106SSRM 1 1/16\" 1-3/4\" 5/8\" 5/16-18 x 5/16 SC-250SSRM 2 7/16\" 3-1/2\" 1\" 1/2-13 x 1/2 SC-112SSRM 1 1/8\" 1-3/4\" 5/8\" 5/16-18 x 5/16 SC-262SSRM 2 1/2\" 3-1/2\" 1\" 1/2-13 x 1/2 SC-118SSRM 1 3/16\" 2\" 11/16\" 3/8-16 x 3/8 SC-275SSRM 2 5/8\" 3-3/4\" 1-1/8\" 1/2-13 x 1/2Bore Tolerance SC-125SSRM 1 1/4\" 2\" 11/16\" 3/8-16 x 3/8 SC-287SSRM 2 3/4\" 4\" 1-1/8\" 1/2-13 x 1/2Bore 1/8 to 3 +.004/+.000 SC-131SSRM 1 5/16\" 2-1/8\" 11/16\" 3/8-16 x 3/8 SC-293SSRM 2 7/8\" 4-1/4\" 1-1/8\" 1/2-13 x 1/2O.D. Tolerance +.000 / -.030 SC-137SSRM 1 3/8\" 2-1/8\" 3/4\" 3/8-16 x 3/8 SC-300SSRM 2 15/16 4-1/4\" 1-1/8\" 1/2-13 x 1/2 SC-143SSRM 1 7/16\" 2-1/4\" 3/4\" 3/8-16 x 3/8 4-1/4\" 1-1/8\" 3\" Single-Split Collar BORE SET BORE SET PART # SIZE O.D. WIDTH SCREW PART # SIZE O.D. WIDTH SCREW 1SC-12SSRM 1/8\" 1/2\" 1/4\" 4-40 x 3/8 1SC-150SSRM 1 1/2\" 2-3/8\" 9/16\" 1/4-28 X 3/4 1SC-18SSRM 3/16\" 5/8\" 5/16\" 4-40 x 3/8 1SC-162SSRM 1 5/8\" 2-5/8\" 11/16\" 5/16-24 X 1 1SC-25SSRM 1/4\" 11/16\" 5/16\" 4-40 x 3/8 1SC-168SSRM 1 11/16\" 2-3/4\" 11/16\" 5/16-24 X 1 1SC-31SSRM 5/16\" 11/16\" 5/16\" 4-40 x 3/8 1SC-175SSRM 1 3/4\" 2-3/4\" 11/16\" 5/16-24 X 1 1SC-37SSRM 3/8\" 7/8\" 11/32\" 6-32 x 3/8 1SC-187SSRM 1 7/8\" 2-7/8\" 11/16\" 5/16-24 X 1 1SC-43SSRM 7/16\" 15/16\" 3/8\" 6-32 x 3/8 1SC-193SSRM 1 15/16\" 11/16\" 5/16-24 X 1 1SC-50SSRM 1/2\" 1-1/8\" 13/32\" 8-32 x 1/2 1SC-200SSRM 3\" 11/16\" 5/16-24 X 1 1SC-56SSRM 9/16\" 1-1/4\" 7/16\" 10-32 x 1/2 1SC-218SSRM 2\" 3\" 3/4\" 5/16-24 X 1 1SC-62SSRM 5/8\" 1-5/16\" 7/16\" 10-32 x 1/2 1SC-225SSRM 2 3/16 3-1/4\" 3/4\" 5/16-24 X 1 1SC-75SSRM 3/4\" 1-1/2\" 1/2\" 1/4-28 x 5/8 1SC-237SSRM 2 1/4\" 3-1/4\" 3/4\" 5/16-24 X 1 1SC-87SSRM 7/8\" 1-5/8\" 1/2\" 1/4-28 x 5/8 1SC-243SSRM 2 3/8\" 3-1/2\" 3/4\" 5/16-24 X 1 1SC-93SSRM 15/16\" 1-3/4\" 1/2\" 1/4-28 x 5/8 1SC-250SSRM 2 7/16 3-1/2\" 7/8\" 3/8-24 X 1 1SC-100SSRM 1-3/4\" 1/2\" 1/4-28 x 5/8 1SC-262SSRM 2 1/2\" 3-3/4\" 7/8\" 3/8-24 X 1 1SC-112SSRM 1\" 1-7/8\" 1/2\" 1/4-28 X 3/4 1SC-275SSRM 2 5/8\" 3-7/8\" 7/8\" 3/8-24 X 1 1SC-118SSRM 1 1/8\" 2-1/16\" 1/2\" 1/4-28 X 3/4 1SC-287SSRM 2 3/4\" 4\" 7/8\" 3/8-24 X 1 1SC-125SSRM 1 3/16\" 2-1/16\" 1/2\" 1/4-28 X 3/4 1SC-293SSRM 2 7/8\" 4-1/4\" 7/8\" 3/8-24 X 1 1SC-137SSRM 1 1/4\" 2-1/4\" 9/16\" 1/4-28 X 3/4 1SC-300SSRM 2 15/16\" 4-1/4\" 7/8\" 3/8-24 X 1 1SC-143SSRM 1 3/8\" 2-1/4\" 9/16\" 1/4-28 X 3/4 4-1/4\" 1 7/16 3\" Bore ToleranceBore 1/8 to 3 +.004/+.000Double-Split Collar BORE SET BORE SET PART # SIZE O.D. WIDTH SCREW PART # SIZE O.D. WIDTH SCREW 1/8\" 1/2\" 1/4\" 4-40 x 3/8 1 1/2\" 2-3/8\" 9/16\" 1/4-28 x 3/4 2SC-12SSRM 3/16\" 5/8\" 5/16\" 4-40 x 3/8 2SC-150SSRM 1 5/8\" 2-5/8\" 11/16\" 5/16-24 x 1 2SC-18SSRM 1/4\" 11/16\" 5/16\" 4-40 x 3/8 2SC-162SSRM 1 11/16\" 2-3/4\" 11/16\" 5/16-24 x 1 2SC-25SSRM 5/16\" 11/16\" 5/16\" 4-40 x 3/8 2SC-168SSRM 1 3/4\" 2-3/4\" 11/16\" 5/16-24 x 1 2SC-31SSRM 3/8\" 7/8\" 11/32\" 6-32 x 3/8 2SC-175SSRM 1 7/8\" 2-7/8\" 11/16\" 5/16-24 x 1 2SC-37SSRM 7/16\" 15/16\" 3/8\" 6-32 x 3/8 2SC-187SSRM 1 15/16\" 3\" 11/16\" 5/16-24 x 1 2SC-43SSRM 1/2\" 1-1/8\" 13/32\" 8-32 x 1/2 2SC-193SSRM 2\" 3\" 11/16\" 5/16-24 x 1 2SC-50SSRM 9/16\" 1-1/4\" 7/16\" 10-32 x 1/2 2SC-200SSRM 2 3/16\" 3-1/4\" 3/4\" 5/16-24 x 1 2SC-56SSRM 5/8\" 1-5/16\" 7/16\" 10-32 x 1/2 2SC-218SSRM 2 1/4\" 3-1/4\" 3/4\" 5/16-24 x 1 2SC-62SSRM 3/4\" 1-1/2\" 1/2\" 1/4-28 x 5/8 2SC-225SSRM 2 3/8\" 3-1/2\" 3/4\" 5/16-24 x 1 2SC-75SSRM 7/8\" 1-5/8\" 1/2\" 1/4-28 x 5/8 2SC-237SSRM 2 7/16\" 3-1/2\" 3/4\" 5/16-24 x 1 2SC-87SSRM 15/16\" 1-3/4\" 1/2\" 1/4-28 x 5/8 2SC-243SSRM 2 1/2\" 3-3/4\" 7/8\" 3/8-24 x 1 2SC-93SSRM 1\" 1-3/4\" 1/2\" 1/4-28 x 5/8 2SC-250SSRM 2 5/8\" 3-7/8\" 7/8\" 3/8-24 x 1 2SC-100SSRM 1 1/8\" 1-7/8\" 1/2\" 1/4-28 x 3/4 2SC-262SSRM 2 3/4\" 4\" 7/8\" 3/8-24 x 1 2SC-112SSRM 1 3/16\" 2-1/16\" 1/2\" 1/4-28 x 3/4 2SC-275SSRM 2 7/8\" 4-1/4\" 7/8\" 3/8-24 x 1 2SC-118SSRM 1 1/4\" 2-1/16\" 1/2\" 1/4-28 x 3/4 2SC-287SSRM 2 15/16\" 4-1/4\" 7/8\" 3/8-24 x 1 2SC-125SSRM 1 3/8\" 2-1/4\" 9/16\" 1/4-28 x 3/4 2SC-293SSRM 3\" 4-1/4\" 7/8\" 3/8-24 x 1 2SC-137SSRM 1 7/16\" 2-1/4\" 9/16\" 1/4-28 x 3/4 2SC-300SSRM 2SC-143SSRM Bore ToleranceBore 1/8 to 3 +.004/+.000 Distributed ByFORM # 70561 ©2015 Kaman Industrial Technologies Corporation. All rights reserved. 800.526.2626 / www.kamandirect.com

FHP SheavesReliaMark® provides a complete line offractional horsepower sheaves and bushingsto meet a wide variety of standard-dutyapplications. These V-belt sheaves arestocked in more than 1,000 sizes,including AK, BK and VP styles withsingle-groove and double-groove optionsin standard diameter sizes. AK and BKsheaves are offered in either finished boreor H-bushed styles, with a complete lineof H-style bushings available.Cut costs, not corners with ReliaMark ReliaMark sheaves and bushings are distributedFractional Horsepower Sheaves and Bushings. exclusively through Kaman Industrial Technologies. Please see the charts on the back of this sheet for aReliaMark Fractional Horsepower Sheaves and quick overview of available styles and sizes. Full productBushings are manufactured to RMA standards and are a specifications, warranty and mounting instructions areclear, cost-effective choice for standard duty V-belt drive available online at www.reliamark.net with links to theapplications. Made of G200 fine grain cast iron and pro- Kaman online ordering system for direct purchase. Fortected by a tough, powder-coated finish, all ReliaMark help with cross-referencing sheaves and bushings orFractional Horsepower Sheaves are spin-balanced for for custom sizing, contact your local Kaman Industrialeconomical, trouble-free, general purpose use. Technologies sales representative at 800-526-2626 or visit www.kamandirect.com.With durability and consistent quality backed up withready inventory, ReliaMark Fractional HorsepowerSheaves and Bushings deliver exceptional value instandard duty V-belt drive performance. Visit www.reliamark.net

AK 2AK BK 2BK Complete product specifications and technicalFAMILY FINISHED “H” FINISHED “H” FINISHED “H” FINISHED “H” 1VP 2VP drawings are available BORE BUSHED BORE BUSHED BORE BUSHED BORE BUSHED online at www.reliamark.net, • with links to the Kaman 15 • • online ordering system 17 • for direct purchase. 20 • • • 21 • • • 22 • • • 23 • • • 24 • • 25 • • • • • • 26 • • • • 27 • • • • • 28 • • • • 30 • • • • • • • • 31 32 • • • • • • • • 34 • • • • • • • • • 36 • • • • 39 • • • • 40 • • • • • 41 • • • • H Style Bushings 42 Available Sizes 44 • • • • • 45 • • • • 46 • • • • 47 • • • • INCH 49 • • • • 3/8\" 13/16\" 1-1/4\" 50 • • • • • 1/2\" 7/8\" 1-3/8\" 51 • • • • 7/16\" 15/16\" 1-5/16\" 52 • • • • 9/16\" 1\" 1-7/16\" 54 • • • • 5/8\" 1-1/16\" 1-1/2\" 55 • • • • 11/16\" 1-1/8\" 56 • • • • • 3/4\" 1-3/16\" 57 • • • • 59 • • • • 60 • • • • • 61 • • • • 62 • • • • • METRIC 64 • • • • 10mm 65 • • • • • 11mm 18mm 30mm 66 • • 12mm 19mm 32mm 67 • • • • 14mm 20mm 35mm 68 • 15mm 22mm 36mm 69 • • 16mm 24mm 38mm 70 • • • • 17mm 25mm 71 • • • 28mm 72 • • 74 • • • • 75 • • • 77 • • 79 • • 80 • • • • 84 • • • • 85 • • 89 • • 90 • • • • 94 • • • • 95 • • 99 • • 100 • • • • 104 • • • • 105 • • 109 • • 110 • • • • 114 • • • • 115 • • 120 • • • • Distributed exclusively by 124 • • • • 130 • • • • 800-526-2626 134 • • • • www.kamandirect.com 140 • • • • 144 • • • • 150 • 154 • • • • 160 • • • • 184 • • • • 190 • • • • ©2011 Kaman Industrial Technologies Corporation. All rights reserved.