20 21 G O L F
TODAY IS NO ORDINARY DAY Look around. Blue skies, wide with potential. Green fields, full of opportunity. Nothing is out of bounds. It’s the perfect day to make something perfect, decide it’s not perfect and rework it, until it is. Perfect. So much to do. I will make light, lighter and effort, effortless. I will make shapes that have never been shaped before. I will turn wood into graphite, and graphite into gold. And when I’m done, I will be pleasantly surprised that I’ve done it again. Yes, today is no ordinary day. Today will be the greatest day of my life’s work. Until, perhaps, tomorrow. 1
CELEBRATING 75 YEARS OF CRAFT AND INNOVATION SINCE 1946 Yonex Manufacturing Headquarters Niigata, Japan 1974 2
CONTENTS 4 E Z O N E G S 16 E Z O N E E L I T E 3 . 0 28 W S - 1 W E D G E S 30 R O Y A L E Z O N E 40 E Z O N E F O R G E D I R O N S 48 E Z O N E G T 54 R E X I S S H A F T S 56 B A G S & A C C E S S O R I E S 3
EXPLOSIVE GRAPHITE SPEED
Achieving maximised distances — with accuracy — is a matter of skill and science. For the EZONE GS series, it begins with the driver. The EZONE GS driver features a Graphite Crown, a vertically polished face and The Power Groove Sole. The Graphite Crown and Power Groove Sole technology allows the club face to flex inwards at the point of impact, while at the same time lowering the head’s centre of gravity and reducing the head weight by 20%. These technologies combined, result in a higher launch, faster ball speed, and less side spin for greater distance. The EZONE GS Groove Flow Concept replaces traditional horizontal grooves on the face of the club with slanted grooves. This improves accuracy and gives straighter ball flights. The fairway woods, hybrids, and irons all incorporate the Groove Flow technology. GRAPHITE CROWN GRAPHITE POWER + POWER GROOVE SOLE CROWN GROOVE SOLE The new EZONE GS crown flexes at impact and quickly snaps back to launch your ball at faster ball speeds. Also at impact, the Power Groove Sole allows the club face to further flex inwards to catapult the ball for more distance. VERTICAL POLISH DRIVER ONLY An innovative design that eliminates traditional horizontal grooves with a vertical polish to reduce unwanted side spin for improved accuracy and increased distance. SLANTED GROOVES The slanted groove face design prevents grass and moisture from coming between the club face and the ball, stabilising the ball flight by reducing left and right side-spin for improved accuracy. G-BRID (GRAPHITE HYBRID) A unique graphite-dampening material placed in the iron head to reduce unwanted vibrations and optimise the centre of gravity for improved playability. 5
DRIVER An innovative graphite crown and a vertically polished face combine to produce remarkable distance with improved accuracy POWER GROOVE SOLE VERTICAL POLISH FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT SHAFT RS EX 330 SL R HEAD COVER TORQUE WRENCH SHAFT FLEX 9 SL R S 12 LOFT (°) HEAD MATERIAL MANUFACTURING METHOD: 6-4, Titanium Precision Casting FACE: Super-TIX51AF Titanium Rolled Material LIE (°) 53 56 10.5 51 53 CROWN: Open Weave Graphite SLEEVE: A 7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan FACE (°) 58.5 (STD) 4.7 4.5 VOLUME (ml) 308 305 2.0 OPEN (STD) HEAD WEIGHT (g) 303 305 SHAFT WEIGHT (g) 460 TORQUE (°) 199 (INCLUDING 8g SLEEVE) CLUB LENGTH (in) 51 53 56 SWING WEIGHT 4.5 CLUB WEIGHT (g) 46 D2.5-3 303 305 308 EZONE GS M E N 6
FAIRWAY WOOD An accurate, stable ball flight from slanted grooves POWER GROOVE SOLE SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT NO #3 #5 #7 SHAFT EX 330 SHAFT FLEX SL R S SL R S SL R S LOFT (°) 21 LIE (°) 15 18 FACE (°) 59 (STD) 59.5 (STD) VOLUME (ml) 58.5 (STD) +2.0 OPEN (STD) SHAFT WEIGHT (g) TORQUE (°) 193 178 164 HEAD COVER TORQUE WRENCH CLUB LENGTH (in) 49 50 53 48 50 53 47 49 52 SWING WEIGHT 4.7 4.5 4.7 4.5 4.7 4.5 CLUB WEIGHT (g) 43.25 42.5 41.75 D1.5 317 320 322 330 324 327 327.6 329.5 332.3 MAIN BODY: SUS 630 Stainless Steel Precision Casting FACE: 455 Maraging Steel Rolled Material CROWN: High Strength Graphite SLEEVE: A 7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy 7 M E N EZONE GS
HYBRID An accurate, stable ball flight from slanted grooves POWER GROOVE SOLE SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT NO #3 #4 #5 HEAD COVER TORQUE WRENCH SHAFT EX 330 SHAFT FLEX SL R S SL R S SL R S HEAD MATERIAL MANUFACTURING METHOD: SUS 630 Stainless Steel Precision Casting LOFT (°) 19 25.5 CROWN: High Strength Graphite SLEEVE: A 7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy LIE (°) 22 FACE (°) 58.5 (STD) 59 (STD) 59.5 (STD) VOLUME (ml) 2.0 OPEN (STD) SHAFT WEIGHT (g) 107 104 TORQUE (°) 52 54 57 105 51 53 56 CLUB LENGTH (in) 52 54 56 SWING WEIGHT 40.75 39.25 CLUB WEIGHT (g) 3.5 341 343 346 39.25 356 358 361 D0.5 348 350 353 EZONE GS M E N 8
IRON G-BRID technology produces a super-soft feel with superb ball flight G-BRID FOR MORE DISTANCE, IMPROVED FEEL ORIGINAL GRIP (ROUND WITH YONEX LOGO) N.S.PRO950GH HT EX 330 FOR EZONE GS: GRAPHITE SHAFT NO 4 5 6 7 8 9 PW AW SW SHAFT EX 330 FLEX SL R SHAFT OPTION GRAPHITE: EX 330 TOTAL WEIGHT* (g) 383 385 S SHAFT WEIGHT* (g) 50 52 385 LOFT (°) 21 23 26 29 33 38 43 48 54 TORQUE (°) 54 3.5 LIE (°) 61 61.5 62 62.5 63 63.5 64 * Weight for 7 Iron only. FACE PROGRESSION (mm) 2.5 3 3.5 4.5 5 HEAD WEIGHT (g) 244 252 261.5 267.5 274 282 290.5 297.5 303 SHAFT LENGTH (in) – GRAPHITE 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5 SWING WEIGHT – GRAPHITE C9.5 D0.5 D1.5 HEAD MATERIAL MANUFACTURING METHOD: 8620 Mild Carbon Steel casting FACE: AM355 Maraging Steel casting 9 M E N EZONE GS
PUTTER A large sweet spot and insert produces a smooth, true roll LOFT (°) LIE (°) HEAD WEIGHT (g) LENGTH (in) HEAD CONSTRUCTION: SUS630 casting 3 71 355 34 HEAD COVER EZONE GS M E N 10
WOMEN’S DRIVER An innovative graphite crown and a vertically polished face combine to produce remarkable distance with improved accuracy POWER GROOVE SOLE VERTICAL POLISH FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT SHAFT EX 330 HEAD COVER TORQUE WRENCH SHAFT FLEX FL LOFT (°) HEAD MATERIAL MANUFACTURING METHOD: SUS630 Stainless Steel Precision Casting FACE: Super-TIX51AF Titanium plate. LIE (°) 12 14 CROWN: Open Weave Graphite SLEEVE: A 7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy FACE (°) 58.5 (STD) VOLUME (ml) 11 W O M E N EZONE GS HEAD WEIGHT (g) +2.0 Open (STD) SHAFT WEIGHT (g) 460 TORQUE (°) CLUB LENGTH (in) 199 (INCLUDING 8g SLEEVE) SWING WEIGHT 43 CLUB WEIGHT (g) 5.3 44.5 C8 288
WOMEN’S FAIRWAY WOOD An accurate, stable ball flight from slanted grooves POWER GROOVE SOLE SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT #7 NO #3 #5 SHAFT EX 330 24 HEAD COVER TORQUE WRENCH SHAFT FLEX 18 59.5 (STD) LOFT (°) 58.5 (STD) FL MAIN BODY: SUS 630 Stainless Steel Precision Casting FACE: 455 Maraging Steel Rolled Material CROWN: High Strength Graphite LIE (°) 21 158 SLEEVE: A 7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan FACE (°) 178 59 (STD) 42 VOLUME (ml) 44 2.0 OPEN (STD) SHAFT WEIGHT (g) 42 164 40.50 TORQUE (°) 305.2 43 CLUB LENGTH (in) 5.3 316 SWING WEIGHT 41.25 CLUB WEIGHT (g) C6 310.5 EZONE GS W O M E N 12
WOMEN’S HYBRID An accurate, stable ball flight from slanted grooves POWER GROOVE SOLE SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT NO #4 #5 #6 #7 SHAFT SHAFT FLEX 22 EX 330 33 LOFT (°) 59 (STD) 60.5 (STD) LIE (°) FL FACE (°) 105 100 VOLUME (ml) 47 25.5 29 45 SHAFT WEIGHT (g) 39 36.75 TORQUE (°) 337 59.5 (STD) 60 (STD) 360 CLUB LENGTH (in) SWING WEIGHT 2.0 OPEN (STD) CLUB WEIGHT (g) 104 102 46 45 HEAD COVER 4.0 HEAD MATERIAL MANUFACTURING METHOD: SUS 630 Stainless Steel Precision Casting CROWN: High Strength Graphite SLEEVE: A 7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy 38.25 37.5 W O M E N EZONE GS C5 345.5 352 13
WOMEN’S IRON G-BRID technology produces a super-soft feel with superb ball flight G-BRID FOR MORE DISTANCE, IMPROVED FEEL ORIGINAL GRIP (ROUND WITH YONEX LOGO) EX 330 FOR EZONE GS: GRAPHITE SHAFT NO 5 6 7 8 9 PW AW SW SHAFT OPTION GRAPHITE: EX 330 LOFT (°) 23 26 48 54 LIE (°) 61.5 62 29 33 38 43 64 FACE PROGRESSION (mm) 2.5 62.5 63 63.5 4.5 5 HEAD WEIGHT (g) 255 264 301 306.5 SHAFT LENGTH (in) – GRAPHITE 37.75 37 3 3.5 34.75 34.5 SWING WEIGHT – GRAPHITE 270 277 284 293 C5 C6 36.5 36 35.5 35 HEAD MATERIAL MANUFACTURING METHOD: [#5 – PW] AM355 Maraging Steel casting + Original Graphite, [AW • SW] 8620 Mild Carbon Steel casting + Graphite Hybrid C4 EZONE GS W O M E N 14
WOMEN’S PUTTER A large sweet spot and insert produces a smooth, true roll LOFT (°) LIE (°) HEAD WEIGHT (g) LENGTH (in) HEAD CONSTRUCTION: SUS630 casting 3 71 355 33 HEAD COVER 15 W O M E N EZONE GS
FORGIVING JUST GOT FASTER
Developed specifically for mid-to-high handicapped golfers, the EZONE ELITE 3.0 features the latest technology for optimal spin, launch, and power. From the driver to the irons, OCTAFORCE NEO is strategically added into each club head producing a lower and deeper centre of gravity. This weight-reduction technology results in faster ball speeds to maximise your distance. OCTAFORCE NEO Octagon-inspired structures are strategically placed within each club to maximise your distance. DRIVER, HYBRIDS: Located in the crown, OCTAFORCE NEO provides a reduction in weight for a lower and deeper centre of gravity. DRIVER, FAIRWAY WOODS: Located in the face, OCTAFORCE NEO produces a 10% larger sweet spot for maximum repulsion and forgiveness. IRONS: Located on the upper back of the face, OCTAFORCE NEO provides a lower centre of gravity with increased face flex. VERTICAL POLISH DRIVER ONLY An innovative design that eliminates traditional horizontal grooves with a vertical polish to reduce unwanted side spin for improved accuracy and increased distance. SLANTED GROOVES The slanted groove face design prevents grass and moisture from coming between the club face and the ball, stabilising the ball flight by reducing left and right side-spin for improved accuracy. 17
DRIVER Effortless distances and improved accuracy for mid-to-high handicap golfers OCTAFORCE NEO VERTICAL POLISH FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL RUBBER 360 M55 LIGHT SHAFT SHAFT SL R EX-E03 SL R HEAD COVER TORQUE WRENCH SHAFT FLEX 10.5 S 12 LOFT (°) HEAD CONSTRUCTION / BODY: 3-1-1-1 Forged Titanium FACE: 6AL-4V Titanium Cup Face LIE (°) 54 55 58.5 54 55 GRIP: Original Rubber 360 SHAFT: New M55 Light FACE (°) 5.5 1.0 OPEN 5.5 VOLUME (ml) SHAFT WEIGHT (g) 308 309 460 308 309 TORQUE (°) 60 CLUB LENGTH (in) 5.4 SWING WEIGHT 45.5 CLUB WEIGHT (g) D2.5 314 EZONE ELITE 3 M E N 18
FAIRWAY WOOD A high-repulsion face and crown provide a larger sweet spot for more forgiveness and effortless distance OCTAFORCE NEO SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL RUBBER 360 M55 LIGHT SHAFT NO 3W 5W SHAFT SHAFT FLEX EX-E03 LOFT (°) LIE (°) SL R S SL R S FACE (°) VOLUME (ml) 15 18 SHAFT WEIGHT (g) TORQUE (°) 57 57.5 CLUB LENGTH (in) SWING WEIGHT 0.5 OPEN CLUB WEIGHT (g) 195 191 54 56 59 53 55 58 HEAD COVER HEAD CONSTRUCTION: SUS630 Stainless Steel Precision Casting GRIP: Original Rubber 360 SHAFT: New M55 Light 5.3 5.1 4.8 5.3 5.1 4.8 43 42.5 D0.5 325 327 330 329 331 334 19 M E N EZONE ELITE 3
HYBRID An effortless ball strike from any lie OCTAFORCE NEO SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL RUBBER 360 M55 LIGHT SHAFT NO 3 4 5 SHAFT SHAFT FLEX SL R S EX-E03 LOFT (°) 20 LIE (°) 58.5 SL R S SL R S FACE (°) 26 VOLUME (ml) 108 23 59.5 SHAFT WEIGHT (g) 60 61 64 TORQUE (°) 59 CLUB LENGTH (in) 40.25 SWING WEIGHT 0.5 OPEN CLUB WEIGHT (g) 352 353 356 107 106 59 60 63 60 61 64 HEAD COVER 4 HEAD CONSTRUCTION: SUS630 Stainless Steel Precision Casting GRIP: Original Rubber 360 SHAFT: New M55 Light 39.75 39.25 D0 357 358 361 363 364 367 EZONE ELITE 3 M E N 20
IRON A lower and deeper centre of gravity and increased face flex produce a higher launch and more forgiving ball flight ORIGINAL RUBBER 360 M55 LIGHT SHAFT NO 4 5 6 7 8 9 PW AW SW SHAFT #5 GRAPHITE: STEEL: EX-03 FEMCO FST-115 SHAFT OPTION GRAPHITE: NEW M55 LIGHT STEEL: FEMCO FST-115 FLEX TOTAL WEIGHT (g) SL R S RS LOFT (°) 21 23 26 29 33 38 43 49 54 SHAFT WEIGHT (g) 368 369 373 TORQUE (°) 57 58 62 408 LIE (°) 61.5 62 62.5 63 63.5 64 64.5 3.8 97 FACE PROGRESSION (mm) 1.75 2 2.25 2.5 2.75 3 3.25 3.5 5 SHAFT LENGTH (in) - GRAPHITE 39.5 38.75 38 37.5 37 36.5 36 35.75 35.5 SHAFT WEIGHT (g) - STEEL 39.25 38.5 37.75 37.25 36.75 36.25 35.75 35.5 35.25 SWING WEIGHT - GRAPHITE D0.5 D1.5 D2.5 SWING WEIGHT - STEEL D1.5 D2.5 D3.5 HEAD CONSTRUCTION: SUS431 Stainless Steel Precision Casting GRIP: Original Rubber 360 SHAFT: New M55 Light 21 M E N EZONE ELITE 3
PUTTER A truer, straighter roll LOFT (°) 3 LIE (°) CLUB LENGTH (in) 72 CLUB WEIGHT (g) 34 531 HEAD CONSTRUCTION: SUS431 Stainless Steel Precision Casting GRIP: Original Rubber Grip SHAFT: Original Putter Shaft (Steel) HEAD COVER EZONE ELITE 3 M E N 22
WOMEN’S DRIVER Effortless distances and improved accuracy for mid-to-high handicap golfers OCTAFORCE NEO VERTICAL POLISH FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL RUBBER 360 EX-E03 L50 EL SHAFT L SHAFT HEAD COVER SHAFT FLEX 12 14 HEAD CONSTRUCTION / BODY: 3-1-1-1 Forged Titanium FACE: 6AL-4V Titanium Cup Face GRIP: Original Rubber 360 SHAFT: New L50 EL LOFT (°) 60 LIE (°) FACE (°) 1.0 OPEN VOLUME (ml) 460 SHAFT WEIGHT (g) 48 TORQUE (°) 5.6 CLUB LENGTH (in) 44.5 SWING WEIGHT C2.5 CLUB WEIGHT (g) 277 23 W O M E N EZONE ELITE 3
WOMEN’S FAIRWAY WOOD A high-repulsion face and crown provide a larger sweet spot for more forgiveness and effortless distance OCTAFORCE NEO SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL RUBBER 360 L50 EL SHAFT NO 3W 5W 7W SHAFT EX-E03 SHAFT FLEX 18 24 LOFT (°) 57 L 58 LIE (°) 194 21 181 FACE (°) 51 57.5 49 HEAD COVER VOLUME (ml) 42.25 0.5 OPEN 41.25 SHAFT WEIGHT (g) 294 187 301 HEAD CONSTRUCTION: SUS630 Stainless Steel Precision Casting GRIP: Original Rubber 360 SHAFT: New L50 EL TORQUE (°) 50 CLUB LENGTH (in) 5.8 24 SWING WEIGHT 41.75 CLUB WEIGHT (g) C1.5 298 EZONE ELITE 3 W O M E N
WOMEN’S HYBRID An effortless ball strike from any lie OCTAFORCE NEO SLANTED GROOVES FOR MORE DISTANCE FOR MORE ACCURACY ORIGINAL RUBBER 360 L50 EL SHAFT NO 4567 SHAFT SHAFT FLEX EX-E03 LOFT (°) LIE (°) L FACE (°) VOLUME (ml) 23 26 29 32 SHAFT WEIGHT (g) TORQUE (°) 59 59.5 60 60.5 CLUB LENGTH (in) SWING WEIGHT 0.5 OPEN CLUB WEIGHT (g) 107 106 105 104 51 50 49 48 HEAD COVER 4.0 39 38.5 38 37.5 C1 318 322 325 330 HEAD CONSTRUCTION: SUS630 Stainless Steel Precision Casting GRIP: Original Rubber 360 SHAFT: New L50 EL 25 W O M E N EZONE ELITE 3
WOMEN’S IRON A lower and deeper centre of gravity and increased face flex produce a higher launch and more forgiving ball flight ORIGINAL RUBBER 360 L50 EL SHAFT NO 5 6 7 8 9 PW AW SW SHAFT #7 GRAPHITE: EX-E03 SHAFT FLEX L LOFT (°) 24 27 30 EX-E03 TOTAL WEIGHT (g) 347 LIE (°) 61.5 62 62.5 SHAFT WEIGHT (g) 46 FACE PROGRESSION (mm) 1 1.25 1.5 34 39 44 50 55 TORQUE (°) 4 SHAFT LENGTH (in) - GRAPHITE 37.75 37 36.5 SHAFT WEIGHT (g) - GRAPHITE C1.5 63 63.5 64 2 2.5 3 3.5 5 36 35.5 35 34.75 34.5 C2.5 C3.5 C4.5 HEAD CONSTRUCTION: SUS431 Stainless Steel Precision Casting GRIP: Original Rubber 360 SHAFT: New L50 EL EZONE ELITE 3 W O M E N 26
WOMEN’S PUTTER A truer, straighter roll LOFT (°) 3 LIE (°) CLUB LENGTH (in) 72 CLUB WEIGHT (g) 33 529 HEAD CONSTRUCTION: SUS431 Stainless Steel Precision Casting GRIP: Original Rubber Grip SHAFT: Original Putter Shaft (Steel) 27 HEAD COVER W O M E N EZONE ELITE 3
WS-1 WEDGE Micro convex grooves provide maximum spin and control ORIGINAL GRIP (ROUND WITH YONEX LOGO) YW-60 GRAPHITE SHAFT DYNAMIC GOLD LOFT (°) 52 56 60 LOFT (°) 52 56 60 SHAFT YW-60 SHAFT DYNAMIC GOLD SHAFT FLEX 64 (STD) MEN’S GRAPHITE 64.5 (STD) SHAFT FLEX STEEL 118 LIE (°) 10 64.5 (STD) 8 SHAFT WEIGHT (g) 35.25 FACE (°) 57 1.0 OPEN (STD) 56 CLUB LENGTH (in) 117 118 473 SOLE BOUNCE 35.75 35 SWING WEIGHT 35.5 35.25 SHAFT WEIGHT (g) 411 12 413 CLUB WEIGHT (g) TORQUE (°) 56 D3-4 CLUB LENGTH (in) 3.3 471 473 SWING WEIGHT 35.5 CLUB WEIGHT (g) D1-2 HEAD AND FACE CONSTRUCTION: 8620 Mild carbon steel Grip Original Rubber (60) 413 WS-1 WEDGE M E N 28
WOMEN’S WS-1 WEDGE Micro convex grooves provide maximum spin and control ORIGINAL GRIP (ROUND WITH YONEX LOGO) YW-60 GRAPHITE SHAFT HEAD AND FACE CONSTRUCTION: 8620 Mild carbon steel Grip Original Rubber (60) LOFT (°) 52 56 60 SHAFT YW-60 SHAFT FLEX 64 (STD) WOMEN’S GRAPHITE 64.5 (STD) LIE (°) 10 64.5 (STD) 8 FACE (°) 57 1.0 OPEN (STD) 56 SOLE BOUNCE 34.5 SHAFT WEIGHT (g) 391 12 34.25 TORQUE (°) 56 393 CLUB LENGTH (in) 3.5 SWING WEIGHT 34.25 CLUB WEIGHT (g) C5-6 393 29 W O M E N WS-1 WEDGE
A NEW ERA IN DISTANCE
Engineered for golfers with slower swing speeds, the Royal EZONE features easy launching capabilities from the entire face. With revolutionary graphite in the shafts, and polish and grooves strategically crafted on each club face, this premium line of clubs adds more distance to every shot. Namd GRAPHITE CROWN Namd POWER + POWER GROOVE SOLE GRAPHITE GROOVE CROWN SOLE By incorporating Namd in the crown, a unique graphite that maintains its flex at higher speeds, the new Royal EZONE crown flexes at impact and quickly snaps back to launch your ball at faster ball speeds. Also at impact, the Power Groove Sole allows the club face to further flex inwards to catapult the ball for more distance. CNC VERTICALLY MILLED FACE DRIVER ONLY Micro-vertical grooves on the face from computerised milling increase accuracy by promoting straight-ball spin at impact. A new face design also helps you accurately visualise the sweet spot. SLANTED GROOVES The slanted groove face design prevents grass and moisture from coming between the club face and the ball, stabilising the ball flight by reducing left and right side-spin for improved accuracy. G-BRID (GRAPHITE HYBRID) IRONS ONLY An additional 10g of tungsten is inserted into the clubhead with G-BRID, a graphite-dampening material that reduces unwanted vibrations and optimises the centre of gravity for improved playability. N a m d TM A new level of performance is achieved through a carbon nanotube (CNT) structure that binds the graphite fibres together, reducing energy loss. Due to its resilient properties, the material flexes and provides a quick snapback. * Namd is technology developed by Nitta Co. Ltd. to uniformly disperse carbon nanotubes in carbon fibre composites. 31
DRIVER An exceptionally forgiving driver with a higher launch for enhanced distance POWER GROOVE SOLE VERTICAL POLISH Namd FOR MORE DISTANCE FOR MORE ACCURACY FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) SHAFT OPTION ROYAL EZONE SPECIALTY SHAFT (MID / LOW) HEAD COVER TORQUE WRENCH SHAFT FLEX R SR R SR LOFT° HEAD MATERIAL MANUFACTURING METHOD: BODY: 8AL-1MO-1V Titanium Precision Casting FACE: Super-TIX® 51AF Rolled Material LIE° 10 11.5 CROWN: Open Weave Graphite + Namd SLEEVE: A7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan FACE° 59.5 VOLUME (ml) SHAFT WEIGHT (g) 1.0 Open TORQUE° 460 CLUB LENGTH CLUB WEIGHT (g) 39 41 39 41 SWING WEIGHT 5.9 46.25 276 278 276 278 D2 D2.5 D2 D2.5 ROYAL EZONE M E N 32
FAIRWAY WOOD Designed for increased distance with a stable ball flight POWER GROOVE SOLE SLANTED GROOVES Namd FOR MORE DISTANCE FOR MORE ACCURACY FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) SHAFT OPTION ROYAL EZONE SPECIALTY SHAFT (MID / LOW) HEAD COVER NO 35 SHAFT FLEX R SR R SR HEAD MATERIAL MANUFACTURING METHOD: BODY: 6AL-4V Titanium Precision Casting FACE: Super-TIX® 51AF Rolled Material LOFT° 15 18 CROWN: High-Strength Graphite SLEEVE: A7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan LIE° 58.5 59 FACE° VOLUME (ml) 0 (STD) SHAFT WEIGHT (g) 192 177 TORQUE° 41 43 40 42 CLUB LENGTH CLUB WEIGHT (g) 5.6 SWING WEIGHT 43.25 42.5 289 291 294 296 C9 C9.5 C9 C9.5 33 M E N ROYAL EZONE
HYBRID Designed to provide the power of a wood and the controllability of an iron POWER GROOVE SOLE SLANTED GROOVES Namd FOR MORE DISTANCE FOR MORE ACCURACY FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) SHAFT OPTION ROYAL EZONE SPECIALTY SHAFT (MID / LOW) HEAD COVER NO 56 SHAFT FLEX R SR R SR HEAD MATERIAL MANUFACTURING METHOD: BODY / FACE: SUS630 Stainless Steel Precision Casting CROWN: High-Strength Graphite LOFT° 22 25 SLEEVE: A7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan LIE° 60 60.5 FACE° VOLUME (ml) 0.5 OPEN SHAFT WEIGHT (g) 107 105 TORQUE° 38 40 37 39 CLUB LENGTH CLUB WEIGHT (g) 5.0 SWING WEIGHT 40 39.25 312 314 320 322 C8 C8.5 C8 C8.5 ROYAL EZONE M E N 34
IRON G-BRID technology with added tungsten produces a super-soft feel with increased distance 4-PIECE G-BRID Namd FOR MORE DISTANCE, IMPROVED FEEL FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) NO 5 6 7 8 9 PW AW AS SW SHAFT ROYAL EZONE SPECIALTY SHAFT SHAFT OPTION FLEX R SR LOFT° ROYAL EZONE SPECIALTY SHAFT (MID / LOW) 55 TOTAL WEIGHT (g) 342 344 LIE° 64 SHAFT WEIGHT (g) 42 44 FACE PROGRESSION (mm) 22 24 26 29 33 38 43 49 5 TORQUE (°) 4.8 BOUNCE° 8 CLUB LENGTH 60.5 61 61.5 62 62.5 63 63.5 35.5 SWING WEIGHT D1 2 2.5 3 3.5 4 4.5 1 23456 38.75 38.25 37.75 37.25 36.75 36.25 36 35.75 HEAD MATERIAL MANUFACTURING METHOD: #5-PW: AM365 Maraging Steel Precision Casting + Graphite Hybrid + Tungsten Alloy + Graphite Plate AW-SW: SUS431 Stainless Steel C9 D0 Precision Casting + Graphite Plate / Made in Japan 35 M E N ROYAL EZONE
WOMEN’S DRIVER An exceptionally forgiving driver with a higher launch for enhanced distance POWER GROOVE SOLE VERTICAL POLISH Namd FOR MORE DISTANCE FOR MORE ACCURACY FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) SHAFT OPTION ROYAL EZONE WOMEN’S SPECIALTY SHAFT (MID / LOW) HEAD COVER TORQUE WRENCH SHAFT FLEX R LOFT (°) HEAD MATERIAL MANUFACTURING METHOD: BODY: 8AL-1MO-1V Titanium Precision Casting FACE: Super-TIX® 51AF Rolled Material LIE (°) 11.5 13 CROWN: Open Weave Graphite + Namd SLEEVE: A7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan FACE (°) 59.5 VOLUME (ml) SHAFT WEIGHT (g) 1.0 OPEN TORQUE (°) 460 CLUB LENGTH (in) CLUB WEIGHT (g) 39 39 SWING WEIGHT 66 45 45 275 275 C7 C7 ROYAL EZONE W O M E N 36
WOMEN’S FAIRWAY WOOD Designed for increased distance with a stable ball flight POWER GROOVE SOLE SLANTED GROOVES Namd FOR MORE DISTANCE FOR MORE ACCURACY FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) SHAFT OPTION ROYAL EZONE SPECIALTY SHAFT (MID / LOW ) HEAD COVER NO 357 SHAFT FLEX HEAD MATERIAL MANUFACTURING METHOD: BODY: 6AL-4V Titanium Precision Casting FACE: Super-TIX® 51AF Rolled Material LOFT (°) R CROWN: High-Strength Graphite SLEEVE: A7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan LIE (°) 15 18 21 FACE (°) 58.5 59 59.5 VOLUME (ml) SHAFT WEIGHT (g) 0 TORQUE (°) 192 167 133 CLUB LENGTH (in) 37 36 35 CLUB WEIGHT (g) 666 SWING WEIGHT 42.25 41.5 40.75 286 291 296 C5 C5 C5 37 W O M E N ROYAL EZONE
WOMEN’S HYBRID Designed to provide the power of a wood and the controllability of an iron POWER GROOVE SOLE SLANTED GROOVES Namd FOR MORE DISTANCE FOR MORE ACCURACY FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) SHAFT OPTION ROYAL EZONE SPECIALTY SHAFT (MID / LOW) HEAD COVER NO 56 HEAD MATERIAL MANUFACTURING METHOD: BODY / FACE: SUS630 Stainless Steel Precision Casting CROWN: High-Strength Graphite SHAFT FLEX SLEEVE: A7075 Aluminium Alloy WEIGHT SCREW: Tungsten Alloy / Made in Japan LOFT (°) R LIE (°) 22 25 38 FACE (°) 60 60.5 VOLUME (ml) SHAFT WEIGHT (g) 0.5 OPEN TORQUE (°) 107 105 CLUB LENGTH (in) 36 35 SWING WEIGHT 5.2 5.2 CLUB WEIGHT (g) 39 38.25 309 317 C4 C4 ROYAL EZONE W O M E N
WOMEN’S IRON G-BRID technology with added tungsten produces a super-soft feel with increased distance 4-PIECE G-BRID Namd FOR MORE DISTANCE, IMPROVED FEEL FOR MORE DISTANCE ORIGINAL ELASTOMER GRIP ROYAL EZONE SPECIALTY SHAFT (with Namd) NO 67 8 9 PW AW AS SW SHAFT ROYAL EZONE SPECIALTY SHAFT SHAFT OPTION FLEX R LOFT (°) 24 26 ROYAL EZONE SPECIALTY SHAFT (MID / LOW) 55 TOTAL WEIGHT (g) 333 LIE (°) 61 61.5 64 SHAFT WEIGHT (g) 35 FACE PROGRESSION (mm) 29 33 38 43 49 5 TORQUE (°) 5.1 BOUNCE 2 8 CLUB LENGTH (L) 1 62 62.5 63 63.5 34.5 CLUB LENGTH (R) 37.25 36.75 34.75 SWING WEIGHT (L) 37.5 37.0 2.5 3 3.5 4 4.5 C5 SWING WEIGHT (R) C7 23456 36.25 35.75 35.25 35 34.75 HEAD MATERIAL MANUFACTURING METHOD: #5-PW: AM365 Managing Steel Precision Casting + Graphite Hybrid + Tungsten Alloy + Graphite Plate AW-SW: SUS431 Stainless Steel 36.5 36.0 35.5 35.25 35.0 Precision Casting + Graphite Plate / Made in Japan C3 C3 C4 C5 C5 C6 39 W O M E N ROYAL EZONE
REDEFINING THE PERFORMANCE OF FORGED IRONS
DISTANCETargeting the abilities and needs of all levels of golfers, the EZONE line-up of forged irons featuresCONTROL the latest graphite-inspired technologies for improved ball striking. Meticulously crafted at the Niigata Manufacturing Headquarters in Japan, Yonex’s forged irons combine traditional forgings with its Graphite Hybrid (G-BRID) technology to improve performance, feel, and control. During the production process, Vacuum Heat Treatment is applied to the iron heads to evenly distribute steel materials, making the forged iron 20% softer for maximum ball control. With G-BRID’s unique graphite-dampening material inserted into the cavity, unwanted vibrations are reduced for improved playability. By combining these two technologies, Yonex forged irons feature an ultra-soft feel with improved playability. LOW HANDICAP MID HANDICAP G-BRID (GRAPHITE HYBRID) A unique graphite-dampening material placed in the iron head to reduce unwanted vibrations and optimise the centre of gravity for improved playability. VACUUM HEAT TREATMENT* A technique that evenly distributes steel materials to make the forged iron 20% softer** for maximum ball control. * Patent pending in Japan ** When compared to conventional forged irons - tested by Yonex 3D ROUND SOLE An optimized, wider sole designed to minimize turf drag for more control. 41
CB 702 FORGED IRON For advanced golfers seeking ultimate control and feel G-BRID VACUUM HEAT TREATMENT 3D ROUND SOLE FOR MORE DISTANCE, IMPROVED FEEL FOR A SOFTER FEEL FOR MORE CONTROL TOUR VELVET RUBBER (WITH YONEX LOGO) N.S.PRO MODUS³ TOUR 105 NO 4 5 6 7 8 9 PW SHAFT #7 N.S.PRO MODUS³ TOUR 105 (Steel) SHAFT N.S.Pro Modus3 TOUR 105 (Steel) FLEX S LOFT (°) 21 24 27 31 35 40 45 TOTAL WEIGHT (g) 422 LIE (°) 60.5 61 61.5 62 62.5 63 63.5 TORQUE (°) 1.7 BOUNCE (°) 2345678 FACE PROGRESSION (mm) 3.0 3.5 SHAFT LENGTH (in) Steel 38.5 38 37.5 37 36.5 36 35.5 HEAD CONSTRUCTION: [#5-#7] BODY: S45C Forged Steel + Graphite Hybrid + Graphite Plate FACE: Forged Mighty Maraging Steel SWING WEIGHT D1 [#8-PW] BODY: S45C Forged Steel + Graphite Hybrid + Graphite Plate FACE: Mighty Maraging Rolled Material FORGED IRONS 42
CB 701 FORGED IRON For mid-handicap golfers looking for maximum forgiveness, distance, and feel G-BRID VACUUM HEAT TREATMENT FOR MORE DISTANCE, IMPROVED FEEL FOR A SOFTER FEEL TOUR VELVET RUBBER (With Yonex Logo) NST 400: GRAPHITE (Namd) * Steel shaft options available NO 56 78 9 PW AW AS SW SHAFT #7 NST 400 (MID) SHAFT OPTION NST 400 (MID) FLEX R SR LOFT (°) 21 23 26 29 38 43 49 56 TOTAL WEIGHT (g) 359 361 LIE (°) 60.5 61 61.5 62 33 63 SHAFT WEIGHT (g) 46 48 BOUNCE (°) 2 3 62.5 5 63.5 63.5 64 TORQUE (°) 3.9 3.9 FACE PROGRESSION (mm) 1 38 4 SHAFT LENGTH (in) 2.5 2.5 37 36 6 8 12 SWING WEIGHT 38.5 38 C9 3 36.5 3.5 4 4.5 36 35.75 35.5 HEAD MATERIAL MANUFACTURING METHOD: BODY: Forged S45C Steel FACE: Precision Cast AM355P Maraging Steel D0 D1 AW-SW: Forged S25C Steel + Graphite Hybrid / Made in Japan 43 FORGED IRONS
MB 501 FORGED IRON For advanced golfers seeking ultimate control and feel G-BRID VACUUM HEAT TREATMENT 3D ROUND SOLE FOR MORE DISTANCE, IMPROVED FEEL FOR A SOFTER FEEL FOR MORE CONTROL TOUR VELVET RUBBER (WITH YONEX LOGO) N.S. PRO MODUS3 SYSTEM3 TOUR120 NO 3 4 5 6 7 8 9 PW SHAFT #5 N.S.PRO MODUS3 SYSTEM3 TOUR 120 SHAFT OPTION N.S.PRO MODUS3 SYSTEM3 TOUR 120 FLEX S LOFT (°) TOTAL WEIGHT (g) 428 LIE (°) 21 24 27 31 35 39 43 47 SHAFT WEIGHT (g) BOUNCE (°) 60 60.5 61 61.5 62 62.5 63 63.5 TORQUE (°) 128.5 FACE PROGRESSION (mm) 23456789 1.5 SHAFT LENGTH (in) SWING WEIGHT 5.2 HEAD MATERIAL MANUFACTURING METHOD: BODY: Forged S25C Steel + Graphite Hybrid / 39.25 38.75 38.25 37.75 37.25 36.75 36.25 35.75 Made in Japan D2 FORGED IRONS 44
CB 301 FORGED IRON For low-handicappers looking for superior control combined with the playability of a cavity back G-BRID VACUUM HEAT TREATMENT FOR MORE DISTANCE, IMPROVED FEEL FOR A SOFTER FEEL TOUR VELVET RUBBER (WITH YONEX LOGO) N.S. PRO MODUS3 SYSTEM3 TOUR120 NO 3 4 5 6 7 8 9 PW SHAFT #5 N.S.PRO MODUS3 SYSTEM3 TOUR120 SHAFT OPTION N.S.PRO MODUS3 SYSTEM3 TOUR120 FLEX S LOFT (°) TOTAL WEIGHT (g) 427 LIE (°) 20 23 26 30 34 38 42 46 SHAFT WEIGHT (g) BOUNCE (°) 60 60.5 61 61.5 62 62.5 63 63.5 TORQUE (°) 128.5 FACE PROGRESSION (mm) 23456789 1.5 SHAFT LENGTH (in) SWING WEIGHT 5.2 5.4 HEAD MATERIAL MANUFACTURING METHOD: BODY: Forged S25C Steel + Graphite Hybrid / 39.25 38.75 38.25 37.75 37.25 36.75 36.25 35.75 Made in Japan D2 45 FORGED IRONS
CB 501 FORGED IRON For low-to-mid handicappers seeking ultimate feel without sacrificing playability G-BRID VACUUM HEAT TREATMENT FOR MORE DISTANCE, IMPROVED FEEL FOR A SOFTER FEEL TOUR VELVET RUBBER (WITH YONEX LOGO) N.S. PRO MODUS3 TOUR 105 NO 34 5678 9 PW SHAFT #5 N.S.PRO MODUS3 TOUR105 SHAFT OPTION N.S.PRO MODUS3 TOUR105 (High) FLEX S LOFT (°) 20 22 41 46 TOTAL WEIGHT (g) 407 LIE (°) 59.5 60 25 28 32 36 62.5 63 SHAFT WEIGHT (g) BOUNCE (°) 12 60.5 61 61.5 62 78 TORQUE (°) 106.5 FACE PROGRESSION (mm) 3456 1.7 SHAFT LENGTH (in) 4 5.5 SWING WEIGHT 39.25 38.75 4.5 5 36.25 35.75 HEAD MATERIAL MANUFACTURING METHOD: BODY: Forged S25C Steel + Graphite Hybrid / 38.25 37.75 37.25 36.75 Made in Japan D1 Left hand available in all lofts FORGED IRONS 46
W 501 WEDGE The world’s first high-precision forged face with optimised spin performance G-BRID VACUUM HEAT TREATMENT 3D ROUND SOLE FOR MORE DISTANCE, IMPROVED FEEL FOR A SOFTER FEEL FOR MORE CONTROL TOUR VELVET RUBBER (WITH YONEX LOGO) N.S. PRO MODUS3 WEDGE 115 NO 48/8 50/10 52/10 54/12 56/12 58/12 SHAFT #5 N.S. PRO MODUS3 WEDGE 115 SHAFT OPTION FLEX S LOFT (°) N.S. PRO MODUS3 WEDGE 115 (MID) SHAFT WEIGHT (g) 122 LIE (°) TORQUE (°) 1.5 FACE PROGRESSION (mm) 48 50 52 54 56 58 BOUNCE (°) LENGTH (in) 63.5 CLUB WEIGHT (g) TOTAL WEIGHT (g) 5.8 6 6.3 6.4 6.8 8 10 12 35.5 35.375 35.25 D1 D2 459 462 466 HEAD MATERIAL MANUFACTURING METHOD: BODY: Forged S25C Steel + Graphite Hybrid / Made in Japan 47 FORGED IRONS
NEW DETAILS DEFINE DISTANCE
Search
