How to Resolve the Issue of Canon Printer Error 1660

Canon Printer Error 1660 arises if the ink cartridges are not properly set up. If after refilling you have disorganized the ink cartridges, Canon ip4200 Error 1660 will surely appear. The best thing you can do is to reinstate the cartridges properly whenever this error appears in your system

Reasons for Canon Printer Error 1660 There are several causes responsible for this error. If you want to remove this error then you need to know the causes of this error. Some of the common reasons for this error are mentioned here: Improper installation of the ink cartridges. Misplacement of the ink cartridges. Damaged or clogged ink cartridges. If the printing machine is not eligible to recognize the ink tank then you may face this error.

Solution 1. Reinsert the Ink Cartridge This is a very simple solution to solve your problem. By reinstalling the ink cartridge you can overcome this error. To do this, follow the given solutions. first, replace the printer cover then check if the red light of an ink cartridge is switched off. Then it means that the cartridge is not inserted accurately. So, you have to reinsert it again. Then you need to replace the cartridge and wait for a few seconds then reinsert it carefully. Make sure that the orange protective cap is replaced from the bottom of the ink cartridge. After that, press the resume/cancel button to continue with the printing process.

Solution 2. Clean and reset the ink cartridges If the above solution fails to remove this error then clean and reset the ink cartridges to fix this problem. To do this follow the given steps: To clean and reset the cartridges switch off the printer and disconnect the entire cables from the printer. Then, open the lid and replace the ink cartridge carefully. Now clean it and insert it again. After that, hold the reset button for some time. Now you can see a red light blinking when the connection between the printer and ink cartridge is established. Then, click the reset key again and hold it until the green light starts to blink, release the button. Now the resetting process of the cartridge is complete. So, print a test page to check whether the process is successful or not.