How do I do a Brother HL-L2300D wireless setup

Brother HL-L2300D Wireless Setup with the Provided CD-ROM but with no USB Cable. This FAQ gives details on how to connect Brother hl-123000d printer to WiFi network using the CD-ROM minus a USB cable. Here, note that your PC must be linked to your wireless network. Points to Check Before Arranging the Wireless Settings: 1.First of all, ensure that at present, your router and computer are already established; in case they have not yet been launched, start your network. 2.Check your network setting. 3.You should have knowledge of your wireless network settings of the WLAN access point/router. 4.Examine and write down the Network Name (SSID: Service Set ID, ESSID: Extended Service Set ID).



Step 9: Stick to the steps on the right-hand side of the monitor. Step 10: Push and grip the Wi-Fi button on your machine for nearly two seconds till the light starts to flicker. Step 11: The Wi-Fi button will brighten once it is linked. Step 12: You have accomplished the wireless setup on your Brother machine. Step 13: Return to your PC. Step 14: Point out Connection: OK and click Next. Step 15: Verify the connection result of the wireless setup.

Step 16: Decide on the Brother machine you want to install. Step 17: At that time, click Next and comply with the on-screen instructions to install the printer driver for network connection. Step 18: Though you have printed with USB connection, you must install the printer driver for network connection. Step 19: Point out the Brother machine you want to install. Step 20: The drivers and software installation begins. Step 21: Obey the on-screen instructions to wrap up the installation.

Brother hl-l2300d Wireless Setup For Windows users: Step 1: You can follow the steps using video clips. Step 2: The clip is being streamed from YouTube. (Opens in a new window.) Step 3: Your machine can modify what is shown on this video. Step 4: The installation screen will become visible without human intervention. Step 5: When prodded, point out your model and language. Step 6: Click Install Printer Driver.

Step 7: Be informed that when the User Account Control screen comes into sight, click Allow or Yes. Step 8: Click Install Printer Driver. Step 9: The minute the License Agreement window becomes visible, click Yes if you approve of the License Agreement. Step 10: Select Wireless Network Connection without verifying Custom Install. Click Next. Step 11: Opt for Brother Peer-to-Peer Network Printer and after that click Next. Step 12: As soon as the Firewall/Anti-Virus detected screen emerges, pick Change the Firewall port settings to achieve the network connection and persist with the installation (Recommended) and afterward click Next. Go on doing until you reach STEP 5.