How to Resolve the Issue of Canon Printer Error Code 990

Are you facing Canon Printer Error Code 990? Then you have landed at the right place to get the best guidance by the Canon printer technical support team. This error code in the Canon printer occurs due to the waste toner sensor detection problem. You faced this problem while doing the printing session with your Canon printer. You need not worry our support team is here to help you. In this blog, we are explaining how to fix Canon Printer Error Code 990 easily. All you need to do is follow the below-given steps to remove the error from the system quickly.

You need to know that when you are replacing the ink/toner cartridge at the same time, you must change the waste toner container. By doing so, you do not get the error message of “990”. To resolve the problem, you should install the K toner cartridge. Also, make sure that the cable connection is working well with providing the good internet. After that, go ahead to perform board replacement.

Crucial Solutions to fix this error code First of all, when you receive the error the next thing that you need to do is check and make sure that the blue toner levers are properly pushed towards the back or not. If not then try to do it as required and then proceed with the checking process. Next, you have to check the sensor and ensure whether it needs to be cleared or not. You will get the sensor at the back of the drum where the plastic cover placed on the side of it. After that, you need to cleaner levers are not pushed well try to do it and then proceed to the next step. Once you are done with plastic cover and the silver arm by using a small and lint-free cloth. Because it is a very fine powder thus simple to remove with the help of fabric. Ensure that the sensor lever on TS1 is pushed up. If not, try to fit it.

Next, you need to clean properly clean the arm. Now, you have to check the sensor lever is pushed up as required or not. If not, then the machine will not able able to pick up the sensor on the dum which leads to the error code 990. In case, you are not able to solve the problem even after following the steps mentioned in the above section. Then you need to connect with our team to get the best and reliable solution to the problem. Lastly, you must force the disc upward to placed the sensor properly.

What to do if unable to process further? If you are still facing the problem, then you can contact Canon Support where Canon technicians will deal with your problem. For More Visit Us: Canon Printer Error Code 990 For those who are watching video link in the description