HF-120_2018_Catalog150

PIEZO REFERENCE GUIDE CHARACTERISTICS OF TIP MOVEMENT The smooth linear movement generated by piezoelectric systems creates a stroke pattern that is similar to hand instrumentation. Adapting the lateral surface of the piezo tip against the tooth surface (similar to a hand instrument) will increase clinical efficiency.ESSENTIALS OF POWER DISPERSION Power Dispersion• Most of the energy is dispersed at the point of tip (1). (1) Point (2) Lateral• The lateral surfaces of the tip (2) are moving in a linear pattern, similar to the stroke of Surfaces a bladed hand instrument. (3) Convex• Adaptation of this lateral surface provides the most efficient deposit removal. Surfaces• Adapt the terminal 2–3 mm of tip for optimal performance.• When concave front or convex back surfaces (3) are adapted to the tooth surface, (2) Lateral the instrument will chatter against the surface rather than effectively remove deposit. SurfacesPIEZO TIP ADAPTATION (3) Concave• Adapt the lateral surface to the tooth for optimal performance. Surfaces• Maintain tip angulation near zero degrees — parallel to tooth surface.• To minimize the risk of root damage, never adapt tip at a 90˚ angle.• Use little or no lateral pressure and let the tip do the work for you.• When concave front or convex back surfaces are adapted to the tooth surface, the instrument will chatter against the surface rather than effectively instrument.SENSORY OBSERVATIONS• Smooth vibration enhances tactile sense for instrumentation.• The smooth motion of the tip is an excellent option for patients with root sensitivity.• Piezo tip vibration is very smooth and quiet when adapted correctly on a lateral surface.• Deposits are pulverized, resulting in a slurry of debris that is visible in the water at the back of the mouth.• Calculus is generally not removed in big chunks as commonly seen during magnetostrictive instrumentation. Lateral surface of tip in useTo achieve the greatest efficiency and patient comfort, C23it is best to adapt the lateral sides of your piezoelectricinstrument to the surface of the tooth.

REFERENCE SECTIONPIEZO TIP CLEANING AND CARECLEANING & STERILIZATION APPLICATION CHART• Piezo tips remain in the Combitorque® Wrench during the complete 100 2LD AFS, AFL, AFR cleaning, disinfection and sterilization reprocessing cycle. P10 S10 P3 2RD,• Clean using ultrasonic cleaner or thermodisinfector. U 4R, 4L P 1D• Steam sterilize for at least 4 minutes at 270°F/132°C or 30 minutes at 250°F/121°C. Do not heat above 275°F/135°C. Light to moderate ˜ ˜ ˜ ˜ ˜ supragingival deposits• Recommend at least 30 minute dry time after sterilization cycle. Heavy supragingival ˜˜ ˜• Clean, disinfect, inspect and steam sterilize before each use deposits following the respective equipment manufacturer’s users instructions. ˜˜ ˜ ˜ ˜˜ Light to moderate• Do not expose to phenols, iodophors or dry heat sterilization. deposits in shallow ˜ ˜˜ ˜ pockets• Detailed care and maintenance instructions are available upon request Light to moderate ˜ or go to Hu-Friedy.com. deposits in deep periodontal pocketsTIP INSTALLATION Moderate to heavy deposits in deep1. Your Hu-Friedy EMS Piezo tip comes with its own combitorque wrench. periodontal pockets2. Attach tip to handpiece using the Combitorque® Wrench by aligning the Furcation areas ˜˜ threaded end of the tip to the handpiece. Replacement of Worn Tips Actual Size Guide3. Rotate the Combitorque® wrench clockwise. Once the instrument is screwed all the way in, give an extra quarter of a turn to obtain the 2 mm loss can result in required torque. Incomplete tightening may cause the tip to become 50% efficiency loss loose or lack vibration. 1 mm loss can result in4. When using the Combitorque® Wrench without a tip previously inserted 25% efficiency loss into the tip carrier, take the following step: place the Combitorque® Wrench over the tip by slipping tip through the small hole in the bottom, closed end of the tool. This will position the tip within the Combitorque® Wrench for safety and convenience.TIP REMOVAL1. Hold the handpiece vertically. Insert the tip through the hole in the bottom of the Combitorque® Wrench.2. Depress wrench slightly while rotating to fully secure tip to wrench.3. Turn the wrench counter-clockwise to loosen and remove tip from handpiece.4. Once removed from handpiece, do not remove the tip from the wrench carrier.OPTIMUM EFFICIENCYScaling efficiency can significantly diminish with worn tips. Inferiorperformance and poor water delivery can result from worn, damaged,bent, or altered tips. For optimal scaling efficiency, we recommendchecking tips regularly for signs of wear.C24

S-SERIES POWER SETTINGSCROSS REFERENCE HU-FRIEDY APPLICATION POWER SETTING TIP HU-FRIEDY SATELEC NSK POWER HU-FRIEDY SATELEC SATELEC NSK SYMMETRY P5 SP NEUTRON VARIOSUSS10 SCALING SCALING MED 2–8 1–4 7–9USP10 SCALING SCALING MED 1–4 7–8 8–10 Min–3USP SCALING SCALING MED 2–10 1–4 7–9 8–10 Min–3US100 SCALING SCALING MED 4–10 1–3 4–6 8–10 Min–3USU SCALING SCALING MED 4–10 1–3 7–8 6–8 Min–1USAFS SCALING SCALING MED 1–5 7–8 1–6 Min–4USAFL SCALING SCALING MED 1–5 7–8 8–10 Min–3USAFR SCALING SCALING MED 1–5 7–8 8–10 Min–3USP3 LOW 4–10 1–3 8–10 Min–3US4R PERIO PERIO LOW 6–10 1–4 Min–4US4L PERIO PERIO LOW 1–6US1D PERIO PERIO LOW 7–10 1–6 1–3 1–4 Min–4US2RD PERIO PERIO LOW 1–5 1–3 1–4 Min–4US2LD PERIO PERIO LOW 1–5 PERIO PERIOHU-FRIEDY S-SERIES ITEMCODE CROSS REFERENCEHU-FRIEDY USS10 US100 USP10 USP USU USP3 US4R US4L US1D US2RD US2LD USAFS USAFL USAFRNSK VARIOS G1 G6 G4 G5 P20 P10 PD3 PD2 P20 P21L P21RSATELEC S1 10Z 10P 1S PFU H3 H4R H4L H1 H2R H2LSatelec and NSK are trademarks of Acteon, Inc., and Nakanishi Inc. respectively. C25

REFERENCE SECTION HU-FRIEDY EMS APPLICATION CHART PERIO/SCALING A B C P PS PI PL1 PL2 PL3 PL4 PL5 Supragingival deposits ˜˜˜˜˜ Shallow pockets Light to moderate deposits in deep periodontal pockets ˜˜ Moderate to heavy deposits in deep periodontal pockets Furcation areas ˜˜ ˜˜ Implant surfaces and restorations Periodontal debridement ˜ ˜˜ Cleaning and irrigation of periodontal pockets Ortho cement ˜˜ ˜˜ ˜ ˜ ˜˜ ˜ ˜˜˜ ˜˜ ENDODONTIC ESI K-type files RT1 RT2 RT3 H D ˜ ˜ ˜ Preparation of root canal system ˜˜ Cleaning and irrigation of root canal system Removal of calcifications ˜ Removal of ledges ˜ Access to broken files in the root canal ˜˜ Thermal condensation of gutta-percha Removal of crowns and bridges Retrograde Preparation of Isthmus POWER AND WATER SETTING CHART HU-FRIEDY EMS TIP POWER SETTING WATER FLOW RATE MODE FILE HOLDER (if applicable) A MED-HIGH MED-HIGH STANDARD P LOW-HIGH MED-HIGH STANDARD 90°, 120°, 180° PS LOW-MED MED-HIGH STANDARD 90°, 120° B LOW-HIGH MED-HIGH STANDARD 120° C LOW-HIGH MED-HIGH STANDARD 90°, 120° PL1 LOW-MED MED-HIGH STANDARD PL2 LOW-MED MED-HIGH STANDARD PL3 LOW-MED MED-HIGH STANDARD PL4 LOW-MED MED-HIGH STANDARD PL5 LOW-MED MED-HIGH STANDARD RT1 LOW-MED LOW-HIGH RT2 LOW-HIGH ENDO D LOW ENDO H LOW-MED NONE ENDO RT3 LOW-MED NONE ENDO ESI MED-HIGH ENDO PI LOW MED-HIGH ENDO K-type files LOW MED-HIGH STANDARD HPL3 LOW-MED MED-HIGH ENDO DPL3 LOW MED-HIGH STANDARD LOW-MED MED-HIGH STANDARD LOW-MEDC26

ABOUT AIR-FLOW® TECHNOLOGY AIR-FLOW Therapy is completely different than other air polishing systems. This advanced technology offers benefits to both the clinician and patient that are difficult to replicate with other procedures. AIR-FLOW Therapy, along with AIR-FLOW PERIO Powder, is safe for tissue, enamel, root surfaces, porcelain composite restorations, and even implants and implant abutments.AIR-FLOW® TECHNOLOGY AIR-FLOW® PERIO TECHNOLOGY• Effective for standard supragingival air polishing • Effective disruption of biofilm in periodontal pockets and stain removal, as well as supragingival and shallow leading to a sustained reduction in bacteria, helping prevent subgingival biofilm removal (with Perio powder) periodontitis or peri-implantitis• Reliable, fast and efficient for the practice • Uniform turbulence of air-powder mixture and water due to• Stress-free and comfortable for the patient patented PERIO-FLOW® nozzle prevents soft-tissue emphysema BREAKING DOWN THE TECHNOLOGYSupragingival + Shallow Site-Specific SubgingivalSubgingival STANDARD AIR-FLOW PERIO-FLOW NOZZLE NOZZLE • Perio powder (glycine) ONLY With Classic powders (sodium bicarbonate) • Thin, tapered plastic nozzle • Supragingival air polishing attachment allows the powder/air/water mixture and stain removal to be disseminated into a pocket* With Perio powder (glycine) • Delicate supragingival • Adaptable around implant and restoration structures surfaces (ortho, restorations) that are often difficult to • Shallow subgingival biofilm reach and clean removal (up to 4mm) *Approved for use in pockets up to 5mm; 10mm in CanadaSCIENTIFIC EVIDENCEBEFORE AFTERThe white surfaces are parts of the biofilm located in a Following treatment with AIR-FLOW®, the biofilm has beenthick layer on the root surface. disrupted so the root surface is clean and smooth in the periodontal pocket.Photos by Prof. Dr. A. Mombelli, University of Geneva, Switzerland C27

AIR-FLOW® UNITS AIR-FLOW® units deliver air polishing and biofilm management that is effective for practitioner and patient alike: reliable, fast and productive for the practice, stress-free, quiet and comfortable for the patient. AIR-FLOW MASTER® UNIT The world’s first subgingival prophylaxis unit, the AIR-FLOW Master allows the clinician to complete both stain and biofilm removal procedures with one device without interrupting the treatment to switch out the powder and powder chamber. • Automatic illumination of activated powder chamber for identification • Easy handling, cleaning and refilling of the powder chambers • Smooth touch panel surface for simple cleaning and disinfection • Sleek user interface offers easy adjustment of power and water delivery • Ergonomic handpieces for working comfort and precision for the clinician AIR-FLOW MASTER® ACCESSORIES AIR-FLOW Powder Chamber | EL-368HF/A PERIO-FLOW Powder Chamber | EL-474HF/A AIR-FLOW handpiece | EL-308HF/A AIR-FLOW Perio handpiece | EL-354HF/A PERIO-FLOW nozzles | DT-113/HF PERIO-FLOW nozzles (bulk/4 boxes) | DT-113HF/HF Multifunctional foot switch | EK-169HF/A AIR-FLOW handpiece hose | EM-105HF/A Includes: 1 AIR-FLOW handpiece, 1 PERIO-FLOW handpiece, 2 powder chambers, maintenance accessories AIR-FLOW Master | FT-188#HF/A/001C28

Includes:3 tips (A, P, PS), 1 water bottle, 1 Piezonhandpiece, 1 AIR-FLOW handpiece,1 PERIO-FLOW handpiece, 2 powderchambers, maintenance accessories AIR-FLOW® Master Piezon®| FT-200#HF/A/001AIR-FLOW MASTER PIEZON® UNIT AIR-FLOW MASTER PIEZON® ACCESSORIESPiezon® and AIR-FLOW® technologies come together to deliver Original Piezon® LED handpiece | EN-060#HF/Acomprehensive prophylaxis treatment to your patients with the Light guide set | FV-065AIR-FLOW Master Piezon unit. Use the Perio powder chamber and AIR-FLOW® handpiece hose | EM-105#HF/AAIR-FLOW handpiece for complete biofilm removal, switching to AIR-FLOW® handpiece | EL-308#HF/Athe PERIO-FLOW handpiece for direct insertion into the pocket; Piezon® hose | EM-111#HF/Aor to the Classic powder chamber for heavier stain removal. PERIO-FLOW® handpiece | EL-354#HF/AThen, switch to Piezon technology to remove hard deposits. Piezon® maintenance set | EQ-115 Bottle 350 ml | EG-064/HF• Smooth touch panel surface for simple cleaning and disinfection Bottle 500 ml | EG-082/HF AIR-FLOW® Powder Chamber | EL-368#HF/A• Easy handling, cleaning and refilling of the powder chambers PERIO-FLOW® Powder Chamber | EL-474#HF/A Multifunctional foot switch (flat) | EK-169#HF/A• Sleek user interface offers easy adjustment of power PERIO-FLOW® nozzles | DT-113HF and water delivery PERIO-FLOW® nozzles (bulk) | DT-113HF/HF Water filter set | EQ-125HR• Ergonomic handpieces for working comfort and precision for the clinician• Intelligent feedback control technology senses when higher power is needed to remove deposit and adjusts accordinglyNote: Hu-Friedy EMS AIR-FLOW® products are sold in the U.S. and Canada only. C29

AIR-FLOW® UNITS AIR-FLOW® S1 UNIT By using a jet formed by air, powder and water, the AIR-FLOW S1 removes dental plaque, soft deposits and surface stains from pits, grooves, interproximal spaces and smooth surfaces of the teeth. • Free-flow technology to prevent clogging of powder, air and water line • 3 integrated self-cleaning filters for proper maintenance of the unit • Incredibly light handpiece tubing allows for easier maneuvering of the handpiece while in use Includes: 1 AIR-FLOW handpiece, maintenance accessories AIR-FLOW S1 | FT-177#HF/A/001C30

AIR-FLOW® S2 COMBINATION UNITThe AIR-FLOW S2 combines AIR-FLOW and Piezon technologies in one device for the professional removal of soft deposits and stains.• Free-flow technology to prevent clogging of powder, air and water line• Controlled Piezon oscillation pattern for greater efficiency and patient comfort• Ultrasonic cavitation and acoustic streaming for enhanced treatment efficiency• 3 integrated self-cleaning filters for proper maintenance of the unit• Incredibly light handpiece tubing allows for easier maneuvering of the handpiece while in useAIR-FLOW® S2 AND AIR-FLOW® S1 ACCESSORIESPiezon handpiece hose | EM-060#HF/AFoot switch, round | EH-004#HF/AAIR-FLOW handpiece hose | EM-094#HF/AWater filter cartridge | EQ-029HFWater filter wrench | DT-015HFPowder chamber cap | EQ-019A/HFSeal for powder chamber cap | BE-009HFAIR-FLOW handpiece | EL-308#HF/APiezon handpiece (S2 only) | EN-046#HF/AIncludes:1 Piezon (non-LED) handpiece, 3 tips (A, P, PS), 1AIR-FLOW handpiece, maintenance accessories AIR-FLOW S2| FT-178#HF/A/001 C31

AIR-FLOW® HANDY 3.0 PORTABLE UNITS The AIR-FLOW handy 3.0 portable air polishing units enable dental practitioners to efficiently, safely and comfortably perform air polishing treatments in any operatory. Simply connect the AIR-FLOW® handy 3.0 device to your dental unit for a simple, convenient air polishing experience. All handy devices were designed with the clinician in mind! Each features: • Lightweight construction allowing for optimal clinician comfort • Slim handpiece for easy to grip and rotation • Well-balanced design for easy handling DISCOVER THE HANDY DEVICE THAT’S RIGHT FOR YOU AND YOUR PRACTICE AIR-FLOW® HANDY 3.0 AIR-FLOW® HANDY 3.0 PREMIUM AIR-FLOW® HANDY 3.0 PERIO • Designed/intended for heavy stain • Two-in-one functionality with two • Designed for biofilm removal in removal with Classic (Sodium handpiece attachments! periodontal pockets (up to 5 mm) with Bicarbonate) powders Perio (Glycine) powder • “PLUS” handpiece is used for • Can be used with Perio (Glycine) supragingival and shallow • Flexible PERIO-FLOW nozzle can be powder for supragingival and subgingival biofilm removal directly inserted in the pocket to flush shallow subgingival biofilm removal (including on ortho, restorative and out biofilm perio work) • Recommended for many perio • “PERIO” handpiece with PERIO- maintenance patients FLOW nozzle for direct insertion into the pocket • Both applications use Perio (Glycine) powder • Recommended for all offices *Up to 10 mm in CanadaC32

Order your handy 3.0 based on the manufacturer of your dental units. If you are unsure,contact your Hu-Friedy representative.AIR-FLOW handy 3.0 Midwest* | FT-220#HF/A/001AIR-FLOW handy 3.0 Kavo | FT-220#HF/A/002AIR-FLOW handy 3.0 W&H | FT-220#HF/A/003AIR-FLOW handy 3.0 NSK | FT-220#HF/A/004AIR-FLOW handy 3.0 Bien Air | FT-220#HF/A/005AIR-FLOW handy 3.0 Sirona | FT-220#HF/A/006AIR-FLOW handy 3.0 PERIO Midwest* | FT-221#HF/A/001AIR-FLOW handy 3.0 PERIO Kavo | FT-221#HF/A/002AIR-FLOW handy 3.0 PERIO W&H | FT-221#HF/A/003AIR-FLOW handy 3.0 PERIO NSK | FT-221#HF/A/004AIR-FLOW handy 3.0 PERIO Bien Air | FT-221#HF/A/012AIR-FLOW handy 3.0 PERIO Sirona | FT-221#HF/A/005AIR-FLOW handy 3.0 Premium Midwest* | FT-225#HF/A/001AIR-FLOW handy 3.0 Premium Kavo | FT-225#HF/A/002AIR-FLOW® 3.0 HANDY ACCESSORIEShandy 3.0 Handpiece | EL-540#HF/Ahandy 3.0 Perio Handpiece | EL-542#HF/Ahandy 3.0 Plus Handpiece | EL-545#HF/AMaintenance set | FV-087HFThermodisinfection adapter | FV-088HFEasy Clean | FV-083#HF/AEasy Fill | FV-074HFAdditional handpieces are recommended sothey can be autoclaved after every patient.*Fits 4-hole connections C33

AIR-FLOW® POWDERPowders are as integral to AIR-FLOW treatments as the device itself, and the innovative AIR-FLOW®powders enable new clinical applications while being safe and comfortable for the patient.Powder particle composition, size and density all contribute to its impact and intended use,and powder must be selected based on the AIR-FLOW® unit or powder chamber being used.AIR-FLOW® PERIO POWDERGRAIN SIZE: 25 µmAIR-FLOW Perio powder’s extra-fine, low density grains remove biofilm andbacteria supragingivally and subgingivally. Made from glycine rather than sodiumbicarbonate, PERIO powder is gentle on the tooth surface, making AIR-FLOWtreatment easier on the patient, as well as safe for delicate surfaces such asimplants, restorations, ortho brackets and materials, etc.Use Perio powder with: PERIO-FLOW powder chambers (AIR-FLOW Master and Master Piezon), AIR-FLOW®handy 3.0 Perio and PLUS handpiecesPerio Powder (four 120g bottles)| DV-110/A/HS AIR-FLOW® Classic Powder AIR-FLOW® Perio PowderC34

AIR-FLOW® CLASSIC POWDERGRAIN SIZE: 65 µmThe AIR-FLOW® Classic powder is effective for dental cleanings and plaque removal. Made from sodiumbicarbonate, the most commonly used material for air polishing, AIR-FLOW® Classic powders provide an alkalineeffect to protect against tooth decay, and an osmotic effect to support the treatment of gingivitis.Available flavors: Lemon and MintClassic Lemon Powder Classic Mint Powder(four 300g bottles) (four 300g bottles)| DV-111/A/LEM | DV-111/A/MINAIR-FLOW® CLASSIC COMFORT POWDERGRAIN SIZE: 40 µmThe Classic Comfort powder offers the well-known polishing efficiency ofsodium bicarbonate with increased patient comfort due to a smaller averagegrain size.While the Classic Comfort powder is primarily used for supragingival removalof biofilm and colorations, it can also be used for surface preparation beforedental treatments.Use Classic Comfort powder with: AIR-FLOW powder chambers (AIR-FLOW Masterand Master Piezon), the AIR-FLOW S2 and AIR-FLOW® handy 3.0Classic Comfort Powder(four 250g bottles)| DV-109/A C35

AIR-FLOW® HANDPIECE AND NOZZLES AIR-FLOW® HANDPIECE Based on free-flow technology, the AIR-FLOW® handpiece features a 120° angle and is intended for supragingival use. The AIR-FLOW® handpiece can also be used on the subgingival border area. | EL-308#HF/A PERIO-FLOW® HANDPIECE Especially developed for subgingival applications, the PERIO-FLOW® handpiece together with the PERIO-FLOW® nozzle can be used in periodontal pockets up to 5 mm*. The PERIO-FLOW® handpiece was innovatively designed to deliver the ultrafine AIR-FLOW® PERIO Powder. | EL-354#HF/A Both handpieces are sterilizable.C36

SUBGINGIVAL PERIO-FLOW NOZZLEThe patented single-use nozzle integrates three horizontal outlets to optimize the gentle turbulenceof the air-powder mixture in the subgingival region. Another vertical outlet delivers water to thedeepest reaches of the periodontal pockets to rinse the treatment area.Order with: AIR-FLOW Master, AIR-FLOW Master Piezon, Handy Premiumand Handy Perio devicesPERIO-FLOW® Nozzle refill box (40ct)| DT-113HFPERIO-FLOW® Nozzle refill pack (four boxes of 40)| DT-113HF/HFPERIO-FLOW® nozzle remover| DT-095HF*Up to 10 mm in Canada C37

AIR-FLOW® REFERENCE GUIDE With a full portfolio of AIR-FLOW products to choose from, which units and powders are right for your practice? Use these comparison charts to determine what features you want in an AIR-FLOW device and what procedures you want to use it for. AIR-FLOW UNIT COMPARISON Handy 3.0 AIR-FLOW AIR-FLOW AIR-FLOW AIR-FLOW PREMIUM S1 S2 MASTER MASTER Handy 3.0 Handy 3.0 PIEZON PERIO Supragingival ˜ ˜˜˜˜˜ Shallow Subgingival ˜˜˜ ˜˜ Subgingival ˜˜ ˜˜ w/Piezon Ultrasonic ˜˜ Heavy Stain ˜ ˜˜˜˜ Advanced Technology ˜˜ Classic Powders ˜ ˜˜˜˜ Perio Powder ˜˜˜ ˜˜ AIR-FLOW POWDER COMPARISON Classic Classic Perio Comfort ˜ Stain ˜˜ ˜ ˜ Light Stain ˜˜ ˜ ˜ Subgingival Biofilm ˜ ˜ Implants ˜ ˜ Ortho ˜ Surface Prep ˜ Sealant Placement Dentures Perio Maintenance Cavitated Areas Restorative MaterialsC38 HU-FRIEDY SATISFACTION GUARANTEE Hu-Friedy is committed to YOU, our valued customer. If for any reason you are unhappy with your Hu-Friedy power equipment, inserts or tips within the first 30 days of purchase, simply return it with the invoice for a product exchange or full refund — no questions asked. No other company offers such a comprehensive guarantee.

PERIODONTAL D4 D11Sickle Scalers D14Scaler/Curette Sets D16Universal Curettes D25Gracey Curettes D28Resin Scalers & Curettes D30Area-Specific Curettes D31Implacare® II Scalers D32Titanium Implant Scalers D36Specialty Scalers D37Disposable Prophy Angles D42Instrument SharpeningMiscellaneous

PERIODONTAL SET-UPSLARGE PROPHY SET-UP SMALL PROPHY/PEDODONTIC/ SEALANT/IMPLANT SET-UPDESCRIPTION SUGGESTION DESCRIPTION SUGGESTIONCassette IMNx* Cassette IMNx*Mirror MIR4DSHD Mirror/Handle MIR4/3, MH6Explorer EXD11/126 Explorer EXD2AProbe PCVOKIT6 Probe PCP12/11.5Sickle Scalers SH6/79, SCNEVI49E2 Sickle Scalers SH6/79,Universal Curette SBH5/6 SCNEVI39E2Area Specific Curettes SG1/29E2, SG7/89E2, Universal Curettes SC13/149, SBH5/69 SG11/129E2,Implant Scaler SG13/149E2 OTHER RECOMMENDED PRODUCTS:Dressing Pliers IMPLG1/2T PROPHY ANGLE, SUCTION TIP, COLOR-CODEDDiamond Sharpening Cards DP2 RINGS, SHARPENING STONE SS3C DSCSETOTHER RECOMMENDED PRODUCTS: PERIODONTAL MAINTENANCEPROPHY ANGLE, SUCTION TIP, ASPIRATINGSYRINGE, A/W SYRINGE TIP, IMS CASSETTE CLIP, DESCRIPTION SUGGESTIONCOLOR-CODED RINGS Cassette IMNx*PERIODONTAL SCALING Mirror Explorer MIR4DSHDDESCRIPTION SUGGESTION Probe Sickle Scalers EXD11/12A6Cassette IMNx* Curettes PPSGKIT6Mirror MIR4DSHD SH6/79, Implant Scaler SCNEVI49E2Explorers EXD11/12A6, SG1/29APE2, SG1/29LC, EXTU17/236 SG11/129E2, SG13/149APProbe PCP15/11.5, PBTPKIT12 IMPLG1/2TSickle Scalers SH6/76E2, SCNEVI49E2After Five/Mini Five Curettes SAS1/29, SAS7/89, OTHER RECOMMENDED PRODUCTS: PROPHY ANGLE, SUCTION TIP, COLOR-CODED SRPG11/129, RINGS, SHARPENING STONE SS3C SRPG13/149, SRPG15/169, SG17/189Universal Curette SM17/189E2Dressing Pliers DP2Diamond Sharpening Cards DSCSETOTHER RECOMMENDED PRODUCTS:PROPHY ANGLE, SUCTION TIP, ASPIRATINGSYRINGE, A/W SYRINGE TIP, IMS CASSETTE CLIP,COLOR-CODED RINGSx* See Section A for exact product code number.

HANDLE OPTIONSEVEREDGE® SCALER HANDLES#9 EverEdge 2.0#9 EverEdge#C8 Resin 8 Colors for EverEdge & EverEdge 2.0IMMUNITY STEEL® SCALER HANDLES DOUBLE END#8 ResinEight#7 Satin Steel Colours#6 Satin Steel#4 Round#2 Octagonal SINGLE END#8 ResinEight#7 Satin Steel Colours#6 Satin Steel#24 Round#1 Octagonal HOW TO USE THIS SECTIONCarpal Tunnel Syndrome Prevention: Neurologists recommend alternating Instrument Name & Pattern 11/12instrument handle sizes as one means of reducing stress. Larger diameter Part Code of pictured instrumenthandles (#6, #7, #8 and #9) help lighten instrument grasp. Using a Scalercombination of various handle sizes plus a more relaxed grasp can help Available handle designslessen the severity of the symptoms of Carpal Tunnel Syndrome. | SM11/127 Handle options: #2,Source: Gerwatowski, L.J., McFall, D.B., Stach, D.: Carpal Tunnel Syndrome; Risk Factors and #4, #6, #7, #8, #9Preventive Strategies for the Dental Hygienist. Journal of Dental Hygiene, February 1992. See index for all available part codes of a specific pattern. D1

EVEREDGE® TECHNOLOGY NEW FINELY-HONED FINISH EverEdge scalers are sharp…EverEdge 2.0 scalers are even sharper. Using an enhanced finishing process, Hu-Friedy’s professional artisans are creating edges that are scientifically measured to be over 60% sharper than the next closest competitor. Less force means easier, more comfortable scaling for the clinician and patient. PROPRIETARY PROCESS Our proprietary processing ensures that the superior edge retention and wear characteristics of EverEdge Technology will last the entire life of the instrument. Since EverEdge is not a superficial coating, the instruments can be resharpened like any other scaler. DIAMOND KNURL The unique diamond knurl pattern on the large diameter handle provides a confident and comfortable grasp. The #9 EverEdge handle was also designed to be the optimal weight for reduced hand fatigue. STAYS SHARPER EVEN LONGER EverEdge 2.0 uses a new, optimized heat control process in order to maintain the hard, sharp edge. This heat control, plus several manufacturing intricacies in Hu-Friedy’s proprietary process, provide the durability needed for effective procedures and continued use. COMFORT ZONE CONE WITH SIGNATURE SERIES PURPLE GRIPS Celebrating Dental Hygiene every day with new hygiene-purple grips! The colored grips also allow for easy identification of the EverEdge 2.0 scalers in each set-up. As an educator, I always recommend Hu-Friedy’s EverEdge instruments to my dental hygiene students. When well maintained, they can be sharpened so quickly and easily. A real advantage of the fine sharp cutting edge is less hand fatigue for the hygienist and better comfort for the patient, so both the clinician and patient can feel the benefits of EverEdge. — JILL NIELD GEHRIG, RDH, MA Dean Emeritus, Division of Allied Health The EverEdge 2.0 blades sharpened very easily and remained sharp with each additional use.” — JUDITH REID, M.Ed, RDH Visit Hu-Friedy.com/EE2 for more information.D2

HANDLE OPTIONS DOUBLE-END HANDLES SINGLE-END HANDLES #2 #4 #6 #7 #8 #C8 #9 #1 #24 #6 #7 #8Gracey •••••••After Five® GraceyMini Five® Gracey •••••••BallBarnhart •••••••BuntingBunting File ••CattoniColumbia •••••••Goldman-FoxHirschfeld File •••Indiana UniversityJacquette •• •Kramer-NevinsLanger •••• ••McCallMorse •••••••OdontNevi •••RatcliffQuétin •••SH6/7, SH5/33, S204,S204S, S204SD •••• • • •SN135, SN137, SN137MTaylor •••••• •••U15U15/30, U15/33 ••Vision Curvette® ScalersYounger-Good ••••••• ••••••• • ••••••• • ••• • ••••• •• •• ••••••• •••••• ••• • ••••• • •••• •••••• •• ••••••••If the instrument tip/handle combination you desire is not shown, we will be glad to provide you with a quote for its preparation.Instrument tips and handles are not sold separately. D3

SICKLE SCALERSDesigned for the removal of supragingival calculusH6/H7 H5/33 H5/U15 6/7 U15 U15/30 U15/33Hygienist Hygienist- Hygienist- Goldman Towner Towner- Towner-| SH6/79E2 Jacquette Towner | SHG6/76 | SU156 Jacquette JacquetteHandle options: #2, | SH5/339E2 | SH5/U156 Handle options: Handle options: | SU15/309E2 | SU15/339E2#4, #6, #7, #8, #C8, #9 Handle options: Handle options: #2, #4, #6, #7, #8 #24, #6, #7, #8 Handle options: Handle options:Thin, contra- #2, #4, #6, #7, #8, #2, #4, #6 Shortened #2, #4, #6, #7, #2, #4, #6, #7,angle design is #C8, #9 blade version #8, #C8, #9 #8, #C8, #9for interproximal Thin sickle scaler of H6/H7.areas. Shank combined withangulation provides a straight sickleaccessibility to blade. For scalingall anterior and interproximal and Some scalers and curettes are available in an American Dental Classic style that is slightlypremolar surfaces. cervical areas of anterior teeth. more rigid in design, with a 5⁄32\" working end. They are offered exclusively in ResinEight®D4 handles. Contact your Hu-Friedy representative for specific part code availability.

NEVI® SCALERSNevi 1 Nevi 1/H5 Nevi 2 Nevi 3 Nevi 4Anterior Anterior Posterior Posterior Posterior| SCNEVI19E2 | SNEV1/H59E2 | SCNEVI29E2 | SCNEVI39E2 | SCNEVI49E2Handle options: Handle options: #6, #7, Handle options: #6, #7, Handle options: #C8, #9 Handle options: #C8, #9#6, #7, #8, #C8, #9 #8, #C8, #9 #8, #C8, #9 Thin, dual cutting Tapered dual cuttingAn elongated disk An elongated disk end A thin posterior blades provide blades provide preciseend for anterior for anterior lingual curved sickle scaler, effective placement in access for effectivelingual stain and stain and calculus the unique contra- tight, narrow contacts deposit removal andcalculus removal removal paired with angle design is great and interproximal increased shankpaired with a super a larger H5 sickle — a for interproximal areas and precise rigidity provides forthin, anterior thin curved blade for reach and ergonomic access for effective effective removal ofcurved sickle. interproximal and hand positioning. removal of light to burnished, heavy and cervical anterior areas. moderate deposits. tenacious deposits. D5

SICKLE SCALERS JACQUETTE SCALERS THE CURVED SICKLE SCALER Two cutting edges on a curved blade that end in a sharp point THE STRAIGHT SICKLE SCALER Two cutting edges on a straight blade that end in a sharp point (also known as a Jacquette Scaler) JACQUETTE NAME GUIDE 30/33 31/32 34/35 H3/H4 14/15 Jacquette Jacquette Jacquette Jacquette Posterior Jacquette #30 Same as 1Y | SJ30/339E2 | SJ31/329E2 | SJ34/359E2 | SH3/46 | SJ14/156 Jacquette #31 Same as 2Y Handle options: Handle options: Handle options: Handle options: Handle options: #2, #4, #6 #2, #4, #6 Jacquette #32 Same as 3Y #2, #4, #6, #7, #8, #2, #4, #6, #7, #8, #2, #4, #6, #7, #8, #C8, #9 #C8, #9 #C8, #9 Miniature Jacquette #33 Same as 1YS Combination Posterior Posterior Miniature Jacquette #34 Same as 2YS standard and standard miniature miniature Jacquette Jacquette Miniature Jacquette #35 Same as 3YS anterior JacquetteD6

204 204IUFW 204S 204SD 1 2/3 Springfield Springfield| S2046 | SIUFW2049E2 | S204S9E2 | S204SD9E2 AnteriorHandle options: | SSP2/36#2, #4, #6 Handle options: Handle options: Handle options: | SSP16 Handle options: #2, #4, #6, #7, #8, #2, #4, #6, #7, #8, #2, #4, #6, #7, #8, Handle options: #2, #4, #6 #C8, #9 #C8, #9 #C8, #9 #24, #6 For posterior Contra angle supra-gingival design offers interproximal greater access scaling to distal surfaces D7

SICKLE SCALERS ANTERIOR POSTERIOR 135 REM 3/4 129 T2/T3 137 0/00 Remington Taylor Morse | SN1359E2 | S1296 | SN1379E2 Handle options: #4, | SRM3/46 Handle options: | ST2/36 | SM0/009E2 #6, #7, #8, #C8, #9 Handle options: #2, #4, #6 Handle options: #4, #2, #4, #6 Handle options: #6, #7, #8, #C8, #9 Handle options: #2, #4, #2, #4, #6, #7, #8 #6, #7, #8, #C8, #9 Small anterior Available sickle paired Miniature blade for single-ended with an anterior scaling crowded or (ST2 and ST26) universal curette overlapping anterior teeth — excellent for stain removalD8

137 OD1/33 128 128 USC-128 WH-2 YG-15Mini Five Odont/ Nebraska Nebraska DE Whiteside Younger-Good Jacquette | SUSC128| SN137M6 | SN128 | SN128DE9E2 Handle options: | SWH2 | SYG156Handle options: | SOD1/336 Handle options: Handle options: #24, #6 Handle options: Handle options:#6, #7, #8 Handle options: #24, #6, #7, #8 #9, #C8 #24, #6 #1, #6 #2,#4, #6 D9

SICKLE SCALERS BALL SCALERS 152 B-2/3 B-5/6 Cumine | SB2/3 Handle: #2 | SB5/6 | SCM152 Handle options: Handle: #2 #2, #4 Use spoon end for stain CRANE-KAPLAN removal Use sickle end for supragingival scaling CI-1 B-1 B-4 | SB1 | SB4 | SCI1 Handle: #24 Handle: #24 Handle options: #24, #6 CI-2/3 CK-6 CK-6D | SCK66 | SCI2/36 Handle: #2, #4, #6 | SCK6D Handle options: Handle options: #2, #4 #2, #4, #6, #7 Angle is not as acute and the blade is curved in a different plane than the SCK6. The overall blade size is smaller.D10

SCALER/CURETTE* SETSMcCALL SET11/12 11A/12A 11/12S 13S/14S MTC 13/14 17/18 17/18PT 19/20Scaler Scaler Modified Pointed Pointed Curette Curette Curette McCall Curette Curette | SM17/18PT | SM19/20| SM11/127 | SM11/12A6 | SM17/188 Handle: #2 Handle: #2Handle options: Handle options: | S11/12S6 | SM13/14S9E2 | SMTC13/146#2, #6, #7, #8 #2, #4, #6 Handle options: Handle options: #4, #6 Handle options: Handle options: #2, #4, #6, #9 #2, #4, #6, #7, #8, #4, #6 #C8, #9 SM17/18S is the Longer blade same as SM17/18 Round tip (1 mm) than* This publication spells curette as per Merriam- available M13/14SWebster’s Collegiate Dictionary, Eleventh Edition, (SM13/14)©2005 Merriam-Webster, Inc. D11

SCALER/CURETTE SETSGOLDMAN-FOX SETGF-1 For removing heavy supragingival and GF-5 Hoe For removing heavy calculus depositsUniversal Scaler subgingival calculus; Useful on proximal Buccal/Lingual| SGF16 surfaces and interproximal areas during | SGF5Handle options: #4, #6 periodontal surgical procedures. Handle: #4GF-2 Contour design for removal of calculus GF-6 For mesial/distal surfaces of theCurette on anterior teeth and premolars Hoe posterior teeth or facial/lingual surfaces| SGF26 | SGF6 of the anterior teethHandle options: #4, #6 Handle: #4GF-3 Same blade surface as GF-2, but GF-21 Sharp spoon on one end is for debridementCurette specifically designed for the proximal | SGF21 in curettage procedures. Small scaler on| SGF36 surface of the posterior teeth. Handle Options: #4, #6 the other end can be used with either aHandle options: #4, #6 circumferential or vertical stroke.GF-4 Additional bend in the shank for easier GF-21S/33 Small end Goldman-Fox scaler with aCurette calculus removal in the molar region Combination #33 straight miniature Jacquette scaler| SGF46 | SGF21S/33Handle options: #4, #6 Handle Options: #2, #4CATTONI SET 103/106 107/108 | S103/1066 Handle options: #4, #6 | S107/1086 Handle options: 104/105 #2, #4, #6, #7, #8 Hoe/Chisel | S104/1056 107/108S Shorter shank than the S107/108 Handle options: #4, #6 Modified | S107/108SD12 Handle options: #2, #4

LANGER CURETTES 1/2 Langer 1/2 Langer 1/2 Langer 1/2 Langer Langer 1/2 for (shown) Rigid After Five Mini Five mandibular posterior | SL1/29E2 | SL1/2R6 | SL1/2AF9E2 | SL1/2MF6 Handle options: Handle options: Handle options: Handle options: #4, #6, #7, #8, #C8, #9 #4, #6, #7, #8 #4, #6, #9 #4, #6, #9 3/4 Langer 3/4 Langer 3/4 Langer 3/4 Langer Langer 3/4 for (shown) Rigid After Five Mini Five maxillary posterior | SL3/49E2 | SL3/4R6 | SL3/4AF9E2 | SL3/4MF9E2 Handle options: Handle options: Handle options: Handle options: #4, #6, #7, #8, #C8, #9 #4, #6, #7, #8 #4, #6, #9 #4, #6, #9 5/6 Langer 5/6 Langer 5/6 Langer 5/6 Langer Langer 5/6 for (shown) Rigid After Five Mini Five maxillary and mandibular anterior | SL5/69E2 | SL5/6R6 | SL5/6AF6 | SL5/6MFPE2 Handle options: Handle options: Handle options: Handle options: #4, #6, #7, #8, #C8, #9 #4, #6 #4, #6 #4, #6, #9 17/18 Langer 17/18R Langer Langer 17/18 for maxillary (shown) Rigid and mandibular posterior | SL17/189E2 | SL17/18R6 Handle options: Handle options: #4, #6, #7, #8, #C8, #9 #4, #6LANGER APPLICATION CHART • Langer After Five and Mini Five Curette terminal shanks are SL3/4 SL5/6 SL3/4 elongated by 3 mm for access into deep periodontal pockets and rootSL17/18 SL17/18 surfaces of 5 mm or more. SL1/2 SL5/6 SL1/2 Standard After Five® Mini Five® • Blade is 10% thinner than standard Langer Langer to ease gingival insertion and Curette Langer Langer reduce tissue distention. Curette Curette • Langer Mini Five Curette has a reduced blade, half the length of the After Five Langer Curette or standard Langer, for better adaptation in narrow pockets and furcations.Langer curettes have the shank design of a Gracey curette combined D13with a universal blade. These instruments can scale all surfaces.

UNIVERSAL CURETTESCOLUMBIA2R/2L Columbia IU13/14 Indiana University | SIU13/146| SC2R/2L9E2 Handle options: #2, #4, #6Handle options: #8, #C8, #9 AnteriorAnterior application IU17/18 Indiana University4R/4L Columbia | SIU17/186 Handle options: #2, #4, #6, #7, #8| SC4R/4L9E2 PosteriorHandle options: #2, #4, #6,#7, #8, #C8, #9 1/2 BuntingPosterior application | SBN1/2 Handle options: #2, #4, #613/14 13/14 13/14 Curette-Chisel combinationColumbia Columbia Columbia(shown) Rigid Curved Tip 5/6 Bunting | SBN5/6| SC13/149E2 | SC13/14E2 | SC13/14C Handle: #2Handle options: #2, #4, Handle options: Handle options: YG7/8 Younger-Good#6, #7, #8, #C8, #9 #2, #4, #6, #7, #8 #2, #4 | SYG7/89E2 Handle options: #2, #4, #6, #7, #8, #C8, #9Universal Universal Universalapplication application applicationBARNHART 1/2 USC Barnhart 1/2 Barnhart 1/2 Barnhart | SBH1/2USC9E2 (shown) Rigid Handle: #9 | SBH1/29E2 | SBH1/2R9E2 5/6 USC Barnhart Handle options: #2, #4, Handle options: #2, #4, | SBH5/6USC9E2 #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 Handle: #9 5/6 Barnhart 5/6 BarnhartD14 (shown) Rigid | SBH5/69E2 | SBH5/6R9E2 Handle options: #2, #4, Handle options: #2, #4, #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9

90° 70°Blade angulation of Blade angulation of HU1/2 Hutchinsona Universal Curette a Gracey Curette | SHU1/2 Handle: #2 Anterior13S/14S Bates 90° UC3/4 Ratcliff| SBT13/14S | SUCR3/49E2Handle: #2 Handle options: #6, #8, #93/4 Rule 10/11 10/11 10/11[23-24] Loma Linda Loma Linda Loma Linda| SR3/4 (shown) Rigid SlimHandle options:#2, #4, #6 | SLL10/116 | SLL10/11R6 | SLL10/11S6 Handle options: Handle options: Handle options: #6, #7, #8 #6, #8 #6, #8411/412 1/2 Mallery| S411/412Handle options: | SMAL1/2#2, #4 Handle options: #2, #4413/414| S413/414 ME-1Handle options: [10-11]#2, #4 | SME1 Handle: #231/32 Goldman| SHG31/32Handle: #2Curette version of31/32 Jacquette D15

GRACEY CURETTES CUTTING EDGE TERMINAL NON-FUNCTIONAL TOE SHANK EDGE Designed to adapt to a specific area or tooth surface. FACIAL SURFACE FACE 70° CUTTING EDGE BACK LATERAL BLADE SURFACE ROUNDED UNDER SURFACE STANDARD GRACEY CURETTES NON-FUNCTIONAL EDGE • Area-specific allows for deep scaling, root planing and periodontal debridement. • Offset blade provides a perfect working angulation for the tooth surface. FACIAL • Offset blade angulation means only the lower cutting edge of each blade is used. SURFACE TERMINAL 70° SHANCKUTTING EDGE BLADE ROUNDED UNDER SURFACE 1/2 1/2 NON-FUNCTIONAL (shown) Rigid SliEgDhGEt contra-angle for anterior | SG1/29E2 | SG1/2R9E2 FACIAL incisors and canines Handle options: #2, #4, Handle options: #2, #4, #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 SURFACE CUTTING EDGE 3/4 3/4 ROUNDED UNDER (shown) Rigid SURFACE | SG3/49E2 | SG3/4R9E2 Short contra-angle for anterior Handle options: #2, Handle options: #2, #4, incisors and canines #4, #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 5/6 5/6 5/6 Medium contra-angle for (shown) Rigid Extra Rigid anteriors and premolars | SG5/69E2 | SG5/6R9E2 | SG5/6ER6 Handle options: #2, #4, Handle options: #2, #4, Handle options: #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 #2, #4, #6, #7, #8 7/8 7/8 7/8 Medium contra-angle for (shown) Rigid Extra Rigid premolars and molars, facial and lingual surfaces | SG7/89E2 | SG7/8R9E2 | SG7/8ER6 Handle options: #2, #4, Handle options: #2, #4, Handle options: #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 #4, #6, #7, #8D16 Extra Rigid Gracey curettes are ideal for tenacious calculus removal, gross scaling, and initial debridement. Blades, however, are identical in size to standard Gracey curettes.

GRACEY 1/2 GRACEY 7/8 GRACEY 11/12 GRACEY 13/14 GRACEY 15/16 GRACEY 17/18 9/10† 9/10 Long contra-angle for molar buccal and (shown) Rigid lingual surfaces and a more pronounced angle than 7/8 for less accessible root surfaces. | SG9/109E2 | SG9/10R9E2 Handle options: #2, #4, Handle options: #6, #7, #8, #C8, #9 #2, #4, #6, #7, #8 11/12† 11/12 11/12 Angulated to reach mesial (shown) Rigid Extra Rigid surfaces of posterior teeth | SG11/129E2 | SG11/12R9E2 | SG11/12ER8 Handle options: #2, #4, Handle options: #2, #4, #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 Handle options: #4, #6, #7, #8 13/14† 13/14 13/14 Angulated to reach distal (shown) Rigid Extra Rigid surfaces of posterior teeth | SG13/149E2 | SG13/14R9E2 | SG13/14ER8 Handle options: #2, #4, Handle options: #2, #4, #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 Handle options: #4, #6, #7, #8 15/16† 15/16 Same shank bends as 13/14, (shown) Rigid but blade positioned to reach mesial posterior surfaces | SG15/169E2 | SG15/16R9E2 Handle options: #2, #4, Handle options: #2, #4, #6, #7, #8, #C8, #9 #6, #7, #8, #C8, #9 17/18 17/18 Accentuated angles improve access to distal Rigid posterior surfaces. The 17/18 also has smaller | SG17/189E2 blade and slightly longer terminal shank. Handle options: #2, #4, | SG17/18R9E2 #6, #7, #8, #C8, #9 Handle options: #2, #4, #6, #7, #8, #C8, #9The Rigid Gracey has a thicker, stronger, and less flexible shank †Area-specific curettes also available in Kramer-Nevins and Turgeon designs.than the standard Gracey. This allows for removal of moderateto heavy calculus. D17

LITE CURETTES Periodontal Maintenance Curettes by Anna Pattison PERIODONTAL MAINTENANCE CURETTES BY ANNA PATTISON • Shorter, thinner, smaller blades • Honed at a 60° angle • Modified rigid shank specially designed to allow easier access and easier insertion under tight tissue Pattison Gracey LITE Curette 1/2 | SG1/29APE2 Handle options: #9 Pattison Gracey LITE Curette 7/8 | SG7/89APE2 Handle options: #9 Pattison Gracey LITE Curette 11/12 | SG11/129APE2 Handle options: #9 Pattison Gracey LITE Curette 11/12 | SG13/149APE2 Handle options: #9D18

GRACEY CURETTESDESIGN COMPARISONSRefer to the chart to match instruments with area of application by using the color-coded diagram below.Gracey Shank Design Blade Blade Available orType & Diameter Length Width Patterns & Area of UseStandard Standard Standard Standard(Finishing) 1/2, 3/4, 5/6 7/8, 9/10 11/12, 15/16 13/14, 17/18*Rigid Standard design, Standard Standard 1/2, 3/4, 5/6 increased shank 7/8, 9/10 diameter 11/12, 15/16 13/14, 17/18*After Five* Longer terminal Standard Decreased 1/2, 3/4, 5/6 shank, standard by 10% 7/8 diameter compared 11/12, 15/16 to Standard 13/14Rigid Longer terminal Standard Decreased 1/2, 3/4, 5/6After Five shank, increased by 10% 7/8 diameter compared 11/12, 15/16 to Standard 13/14Mini Five Longer terminal Decreased Decreased 1/2, 3/4, 5/6 shank, standard by 50% by 10% 7/8 diameter compared 11/12, 15/16 or to Standard 13/14Rigid Longer terminal Decreased Decreased 1/2, 3/4, 5/6 ANTERIOR 1/2, 3/4, 5/6Mini Five shank, increased by 50% by 10% 7/8 diameter compared 11/12, 15/16 to Standard 13/14 BUCCAL/LINGUAL 7/8, 9/10Micro Longer terminal Decreased Decreased 1/2 MESIAL SURFACES 11/12, 15/16Mini Five shank, increased by 50% by 20% 7/8 PREMOLARS, MOLARS diameter compared 11/12 to Mini Five 13/14 DISTAL SURFACES PREMOLARS, MOLARS 13/14, 17/18*HU-FRIEDY THINNING SERVICE D19Most scalers and curettes (except After Five® and Mini Five®) can be thinned to create anextra fine blade. Add TSDE to double-end or TSSE to single-end to the original part code.

GRACEY CURETTES MINI FIVE® GRACEY CURETTES AFTER FIVE® GRACEY CURETTES • Terminal shank is 3 mm longer than Standard Gracey. Designed to adapt to a specific area or tooth surface. • Compared to the standard Gracey curette, blade is 50% • Terminal shank is 3 mm longer than Standard Gracey. shorter and 10% thinner. • Longer terminal shank allows better access to deep pockets and areas with recession. • Blade is 10% thinner than standard Gracey curette to allow for less tissue distention • Good for scaling in deep, narrow pockets. when accessing deeper pockets. 3 mm Terminal shank redesigned to be 3 mm Gracey After Five curette reaching Mini Five reaching into a deep pocket longer than a standard Gracey curette. deep into a pocket. on a narrow root. GRACEY COMPARISON CHART Standard Standard Standard Standard vs. vs. vs. vs. Rigid After Five Mini Five Micro Mini Five* | SG1/2R9E2 | SRPG1/29E2 | SAS1/29E2 | SMS1/29E2 *Not available in 11/14 or 12/13D20

AFTER FIVEDesigned to adapt to a specific area or tooth surface.1/2 3/4 5/6 7/8 11/12 13/14 15/16 11/14 12/13 Mesial/ Mesial/| SRPG1/29E2 | SRPG3/49E2 | SRPG5/69E2 | SRPG7/89E2 | SRPG11/129E2 | SRPG13/149E2 | SRPG15/169E2 Distal DistalHandle options: #2, #4, #6, #7, #8, #C8, #9 on all After Five patterns | SRPG11/149E2 | SRPG12/139E2Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid Rigid| SRP1/2R9E2 | SRP3/4R9E2 | SRP5/6R9E2 | SRP7/8R9E2 | SRP11/12R9E2 | SRP13/14R9E2 | SRP15/16R9 | SRP11/14R4 | SRP12/13R4E2Handle options: #2, #4, #6, #7, #8, #C8, #9 on all After Five Rigid patterns except where noted Handle: #4 Handle: #4 Extra Rigid Extra Rigid Extra Rigid Extra Rigid | SRP5/6E6 | SRP7/8E6 | SRP11/12E6 | SRP13/14E6 Handle options: #6, #7, #8 on all After Five Extra Rigid patterns D21

GRACEY CURETTES MINI FIVE 1/2 3/4 5/6 7/8 11/12 13/14 15/16 11/14 12/13 | SAS15/169E2 Mesial/Distal Mesial/Distal | SAS1/29E2 | SAS3/49E2 | SAS5/69E2 | SAS7/89E2 | SAS11/129E2 | SAS13/149E2 | SAS11/149E2 | SAS12/139E2 Handle options: #2, #4, #6, #7, #8, #9 on all Mini Five patterns. #C8 on all Mini Five Patterns except 11/14 and 12/13 Mesial/Distal Gracey Curettes Rigid Rigid Rigid Rigid Rigid Rigid Rigid | SAS1/2R9E2 | SAS3/4R9E2 | SAS5/6R9E2 | SAS7/8R9E2 | SAS11/12R9E2 | SAS13/14R9E2 | SAS15/16R9E2 Handle options: #2, #4, #6, #7, #8, #C8, #9 on all Mini Five Rigid patternsD22

MICRO MINI• Longer terminal shank designed to access deep periodontal pockets• Compared to the standard Gracey curette, blade is 50% shorter for better adaptation in narrow pockets and furcations• Blade is 20% thinner than a Mini Five Gracey to help reduce tissue distension and ease gingival insertionMicro Mini Micro Mini Micro Mini Micro MiniFive 1/2 Five 7/8 Five 11/12 Five 13/14| SMS1/29E2 | SMS7/89E2 | SMS11/129E2 | SMS13/149E2Handle: #9 Handle: #9 Handle: #9 Handle: #9 D23

GXRXAXCEY CURETTES GRACEY MESIAL-DISTAL CURETTES GRACEY PROPHY CURETTES These combinations of working ends are designed to complete an entire facial The blades are the same size as the Gracey Standard Curettes, but the shank or lingual sextant without changing instruments, increasing efficiency. is shorter and more rigid for removal of supra-gingival deposits. 11/14 11/14 P1/2 Mesial/Distal Mesial/Distal | SGP1/2 (shown) Rigid Handle options: #2, #7 | SGR11/14R | SG11/146 Handle options: #2, #4 P3/4 Handle options: #2, | SGP3/4 #4, #6, #7, #8, #C8 Handle options: #2, #7 12/13 12/13 P5/6 Mesial/Distal Mesial/Distal | SGP5/6 (shown) Rigid Handle options: #2, #7 | SGR12/13R | SG12/136 Handle options: #2, #4 P7/8 Handle options: #2, | SGP7/8 #4, #6, #7, #8, #C8 Handle options: #2, #7 THE CLAYTON GRACEY STORY In the late 1940s, an innovative dentist from The Gracey curettes have come a long way the University of Michigan had a vision. Clayton since the original design. Hu-Friedy currently Gracey wanted to “give every dentist the manufactures a variety of styles and patterns, possibility to treat even the deepest and least such as After Five® curettes with a longer terminal accessible periodontal pockets simply and shank and thinned blade, Mini Five® curettes with without traumatic stretching of the gingiva.” After Five® features and a shorter blade, and the 15/16 and 17/18 patterns. An optional Rigid shank Dr. Gracey brought his idea to Hugo Friedman, is available on all of the Gracey designs. the founder of Hu-Friedy, who supported his concept. Together they developed a series of 14 Hu-Friedy is continually looking for new ways to single-ended area-specific instruments for the improve our existing products. Our success is successful removal of deposits from root surfaces. dedicated to the pioneers in dentistry, including Dr. Clayton Gracey, who helped to make a vision Dr. Gracey’s designs laid the groundwork become not only a reality, but also a part of for the new instruments of today. Currently, every dental office today. Gracey curettes are available as double-ended instruments with multiple handle choices.D24

RESIN 8 COLORSFor EverEdge & EverEdge 2.0Hu-Friedy’s Resin 8 Colors are ergonomic, lightweight and offer a color-codingsystem based on specific areas of the mouth. Plus, each scaler and curettefeatures Hu-Friedy’s proprietary EverEdge® technology, which keeps the workingends sharper longer. See the full list of Resin 8 Colors part codes on page D27. SICKLE SCALERS ANTERIOR: Nevi 1 & Nevi 1/H5, H6/7 Hygienist, H5/33 Hygienist, 30/33 Jacquette, Centennial POSTERIOR: 204 IUFW, 204S, 204SD, 135, Nevi 2, Nevi 3, Nevi 4, 31/32, Standard Jacquette, 34/35 Miniature JacquetteUNIVERSAL CURETTESBARNHART: 1/2, 1/2R, 5/6, 5/6RCOLUMBIA: 2R/2L, 4R/4L, 13/14YOUNGER-GOOD: 7/8MCCALL: 13/14, 13/14S, 17/18LANGER: 1/2, 3/4, 5/6, 17/18 D25

RESIN 8 COLORS GRACEY CURETTES 1/2, 3/4 1/2 and 3/4 Graceys available in Standard, Rigid, After Five, After Five Rigid, Mini Five® and Mini Five Rigid varieties 5/6 5/6 Graceys available in Standard, Rigid, After Five, After Five Rigid, Mini Five and Mini Five Rigid varieties 7/8, 9/10 7/8 Graceys available in Standard, Rigid, After Five, After Five Rigid, Mini Five and Mini Five Rigid varieties 9/10 Graceys available in Standard 11/12, 15/16 11/12 and 15/16 Graceys available in Standard, Rigid, After Five, After Five Rigid, Mini Five and Mini Five Rigid 13/14, 17/18 13/14 Graceys available in Standard, Rigid, After Five, After Five Rigid, Mini Five and Mini Five Rigid 17/18 Graceys available in Standard and RigidD26 11/14 and 12/13 Graceys are available in the Standard variety and come in a Resin 8 Colors red handle

RESIN 8 COLORSGRACEY CURETTESGRACEY 1/2 | SG1/2C8E2 GRACEY 11/12 | SG11/12C8E2 UNIVERSAL CURETTES■ Standard | SG1/2RC8 ■ Standard | SG11/12RC8E2■ Rigid | SRPG1/2C8E2 ■ Rigid | SRP11/12C8E2 BARNHART | SBH1/2C8E2■ After Five | SRP1/2RC8E2 ■ After Five | SP11/12RC8E2 ■ 1/2 | SBH1/2RC8E2■ After Five Rigid | SAS1/2C8E2 ■ After Five Rigid | SAS11/12C8E2 ■ 1/2 Rigid | SBH5/6C8E2■ Mini Five | SS1/2RC8E2 ■ Mini Five | SS11/12RC8E2 ■ 5/6 | SBH5/6RC8E2■ Mini Five Rigid ■ Mini Five Rigid ■ 5/6 Rigid | SG3/4C8E2 | SG13/14C8E2 | SC2R/2LC8E2GRACEY 3/4 | SG3/4RC8E2 GRACEY 13/14 | SG13/14RC8E2 COLUMBIA | SC4R/4LC8E2■ Standard | SRPG3/4C8E2 ■ Standard | SRP13/14C8E2 ■ 2R/2L | SC13/14C8E2■ Rigid | SRP3/4RC8E2 ■ Rigid | SP13/14RC8E2 ■ 4R/4L■ After Five | SAS3/4C8E2 ■ After Five | SAS13/14C8E2 ■ 13/14 | SYG7/8C8E2■ After Five Rigid | SS3/4RC8E2 ■ After Five Rigid | SS13/14RC8E2■ Mini Five ■ Mini Five YOUNGER-GOOD | SM13/14C8E2■ Mini Five Rigid | SG5/6C8E2 ■ Mini Five Rigid | SG15/16C8E2 ■ 7/8 | SM13/14SC8E2 | SG5/6RC8E2 | SG15/16RC8E2 | SM17/18C8E2GRACEY 5/6 | SRPG5/6C8E2 GRACEY 15/16 | SRP15/16C8E2 McCALL■ Standard | SRP5/6RC8E2 ■ Standard | SP15/16RC8E2 ■ 13/14 | SL1/2C8E2■ Rigid | SAS5/6C8E2 ■ Rigid | SAS15/16C8E2 ■ 13S/14S | SL3/4C8E2■ After Five | SS5/6RC8E2 ■ After Five | SS15/16RC8E2 ■ 17/18 | SL5/6C8E2■ After Five Rigid ■ After Five Rigid | SL17/18C8E2■ Mini Five | SG7/8C8E2 ■ Mini Five | SG17/18C8E2 LANGER■ Mini Five Rigid | SG7/8RC8E2 ■ Mini Five Rigid | SG17/18RC8E2 ■ 1/2 | SRPG7/8C8E2 ■ 3/4GRACEY 7/8 | SRP7/8RC8E2 GRACEY 17/18 | SG11/14C8E2 ■ 5/6■ Standard | SAS7/8C8E2 ■ Standard ■ 17/18■ Rigid | SS7/8RC8E2 ■ Rigid | SG12/13C8E2■ After Five■ After Five Rigid GRACEY 11/14■ Mini Five ■ Standard■ Mini Five Rigid GRACEY 12/13GRACEY 9/10 ■ Standard■ Standard | SG9/10C8E2SICKLE SCALERSANTERIOR SICKLE SCALERS POSTERIOR SICKLE SCALERS■ Nevi 1 | SCNEVI1C8E2 ■ 204 IUFW | SIUFW204C8E2■ Nevi 1/H5 | SNEV1/H5C8E2 ■ 204S | S204SC8E2■ H5/33 | SH5/33C8E2 ■ 204SD | S204SDC8E2■ H6/7 | SH6/7C8E2 ■ Nevi 2 | SCNEVI2C8E2■ 30/33 Jacquette | SJ30/33C8E2 ■ Nevi 3 | SCNEVI3C8E2■ 0/00 Morse | SM0/00C8E2 ■ Nevi 4 | SCNEVI4C8E2■ 137 | SN137C8E2 ■ 31/32 Jacquette | SJ31/32C8E2■ U15/30 Jacquette | SU15/30C8E2 ■ 34/35 Jacquette | SJ34/35C8E2■ U15/33 Jacquette | SU15/33C8E2 ■ 135 | SN135C8E2■ Centennial | SDH100C8E2 D27

AREA-SPECIFIC CURETTES Designed to adapt to a specific area or tooth surface. VISION CURVETTES • 50% shorter, curved blades • 5 mm and 10 mm shank markings • Blade indentification mark (+) on handle • Identification bands on handle: one band on 11/12, two bands on 13/14 (on #4 handle only) Curvette 11/12 Curvette 1/2 | SGC11/12 | SGC1/2 Handle options: #4, #6 Handle options: #4, #6 For mesial surfaces of molars and improved adaptation into furcations For anterior and premolar surfaces and interproximal areas Curvette Sub-Zero Curvette 13/14 | SGCSUB-06 Handle options: #4, #6 | SGC13/14 Long shank reaches deep into the sulcus, Handle options: #4, #6 adapting to the facial and lingual root surfaces For distal surfaces of molars and improved adaptation into furcations TURGEON MODIFIED GRACEY CURETTES • Blade is designed to produce a different cross section of blade angulation. • Modified shape provides a sharper blade. • Modified shape is easy to sharpen. • Blades are narrow for ease of insertion. FACE STANDARD TURGEON GRACEY GRACEY Angulation of a Standard Gracey vs. a Turgeon Gracey 5/6 11/12 13/14 13/14S 17/18S Modified Modified Modified Modified Modified Gracey Gracey Gracey McCall McCall | STG5/66 | STG11/126 | STG13/146 | STM13/14S6 | STM17/18S6 Handle options: Handle options: Handle options: Handle options: Handle options: #2, #6 #2, #6 #2, #6 #2, #6 #2, #6D28

AREA-SPECIFIC CURETTESDEBRIDEMENT CURETTES*These unique curettes are used after ultrasonic scaling for gentleremoval of residual deposits and for smoothing the root surface. IDEAL FOR FURCATIONS, DEVELOPMENTAL GROOVES & LINE ANGLESEntire edge of the blade Shanks are extendedis a cutting edge enabling for easy access intoa push or pull stroke in deep pockets.all directions – vertical,horizontal or oblique. 1/2 3/4 5/6 7/8 Buccal Mesial Anterior Anterior Lingual Distal | SOH5/6 Extended | SOH1/2 | SOH3/4 Handle: #4 | SOH7/8 Handle: #4 Handle: #4 Handle: #4FURCATION CURETTESDesigned for scaling root concavities and furcations.Comparison of 1.3 mm and0.9 mm curette blades 1 2 1 2 1 2 3 DeMarco DeMarco Quétin Quétin Quétin Quétin Quétin Buccal- Buccal- Mesial- Mesial- Labial- | SDM16 | SDM26 Lingual Lingual Distal Distal Lingual Handle options: Handle options: 0.9 mm 1.3 mm 0.9 mm 1.3 mm Scaler #4, #6 #4, #6 | SQBL16 | SQBL26 | SQMD16 | SQMD26 | SQLL36 Handle options: Handle options: Handle options: Handle options: Handle options: #4, #6 #4, #6 #4, #6 #4, #6 #4, #6 *Designed in consultation with Trisha O’Hehir, RDH.The DeMarco Curettes are excellent for stain removal on anterior lingual surfaces. D29

IMPLACARE®II SCALERS For implant maintenance, Implacare II is used to remove plaque and calculus with the least amount of alteration to titanium abutments.* Implant Maintenance Care Starter Kit | IMPCKITII Implacare II Colorvue 1 Implacare scaler handle 1 Colorvue probe handle 1 set of 204S scaler tips 1 set of PCV11 tips 1 set of H6/H7 scaler tips (3-6-8-11) 1 set of Columbia 4R/4L tips 1 set of PCV12 tips 1 set of Langer 1/2 tips (3-6-9-12) 1 set of Barnhart 5/6 tips 1 set of Williams tips (1-2-3-5-7-8-9-10) 1 set of UNC12 tips (1-2-3-4-5-6-7-8-9-10-11-12) Langer 1/2 Kit (Handle & 12 pairs) | IMPLLG1/26 Langer 1/2 Tips Refill Package (12 pairs) | IMPLLG1/2 Barnhart 5/6 Kit (Handle & 12 Pairs) | IMPLBH5/66 Barnhart 5/6 Tips Refill Package (12 pairs) | IMPLBH5/6 Columbia 4R/4L Kit (Handle & 12 pairs) | IMPL4R/4L6 Columbia 4R/4L Tips Refill Package (12 pairs) | IMPL4R/4L H6/H7 Kit (Handle & 12 pairs) | IMPLH6/76 H6/H7 Tips Refill Package (12 pairs) | IMPLH6/7 204S Kit (Handle & 12 pairs) | IMPL204S6 204S Tips Refill Package (12 pairs) | IMPL204S Implacare II Intro Kit (Includes all 5 tip designs) | IMPLINTRO6 Implacare II Assorted Tips Kit* (12 pairs) | IMPLSORT6 Implacare II Assorted Tips Refill Package* (12 pairs) | IMPLSORT SICKLE SCALER TIPS UNIVERSAL CURETTE TIPS 204S Hygienist H6/H7 Barnhart 5/6 Langer 1/2 Columbia 4R/4L 20% THINNER! 20% THINNER! 20% THINNER! Titanium abutment images are Scaling with Implacare II caused the least alteration to the abutment surface from the International Journal of Oral & Maxillofacial Implants ORIGINAL TITANIUM PLASTIC MATERIAL study. Hallmon WW. Waldrop ABUTMENT MAGNIFIED CONTAINING ABRASIVES TC. Meffert RM. Wade BW. INT J ORAL MAXILLOFAC IMPLANTS 25AFTER 1996;11:96–100. *Hasturk H, Huy Nguyen D, Sherzai STROKES H, Song X, Soukos N, Bidlack F, Van IMPLACARE II TIP Dyke T. Comparison of the Impact MADE WITH PLASTEEL of Scaler Material Composition on Polished Titanium Implant Abutment Surfaces. Journal of Dental Hygiene. 2013;87(4)D30

NEW TITANIUM IMPLANT SCALERS Perform at your best with Hu-Friedy’s new, state of the art line of Titanium Implant Scalers. Made from the same titanium alloy as implants and abutments, these scalers are expertly designed and manufactured for implant maintenance, debridement, biofilm removal and can be used both supra and subgingival.TITANIUM IMPLANT SCALERS • Significantly increased visibility with Hu-Friedy’s signature teal colored anodized titanium • Optimized sharpness with finely honed cutting edges and sharpened post anodization process • Ability to be sharpened at any time to increase the useful life of the instrument • Enhanced ergonomic handle for maximum tactile sensitivity and support204SD| IMP204SDTHandle options: #6Langer 1/2| IMPLG1/2THandle options: #6Mini Five 1/2| IMPM1/2THandle options: #6Mini Five 11/12| IMPM11/12THandle options: #6Mini Five 13/14| IMPM13/14THandle options: #6 D31

SPECIALTY SCALERS HOE SCALERS Used to dislodge heavy supramarginal calculus deposits (use a pull stroke) Centennial 7K XS-15 U15/13K WV1/2 6/7 8/9 Scaler | S7K Towner | SU15/13K | SWV1/2 Orban Orban Handle: #24 Handle: #4 Handle: #2 Mesial/ Buccal/ | SDH1009E2 | SXS156 Distal Lingual Handle options: Handle options: | SO6/7 | SO8/9 #9, #C8 #24, #6 Handle options: Handle options: #2, #6 #2, #6 Sickle, hoe For anterior combination for linguals anterior depositsD32