Catálogo Leadermac 2018

Molduladoras para madera mahego.com Catálogo 2018

Moulders 1 smartmac series Unjoited Moulders Ÿ 2 to 5 heads and 7\" (180mm) & 9\" (230mm) widths Ÿ One piece cast iron or steel machine frame specially heat treated & stress relieved Ÿ 1-1/2 \"(40mm) or 1-13/16\" (50mm) diameter spindles standard Ÿ SKF ABEC 6 precision spindle bearings throughout (4 per spindle) Ÿ Each spindle is driven by an individual motor except side heads share 1 motor Ÿ Tables are hard chrome plated Ÿ Top rolls variable pneumatic tensioned Ÿ Easy head adjustment by mechanical digital readouts Ÿ Full cardan shaft drive with feed speeds up to 80 FPM Ÿ Dual digital readout available for radial setting (NS & Tops) Ÿ Full width bottom driven bedrolls (infeed & outfeed) Ÿ Universal head optional Ÿ Pneumatic tension top chipbreakers & roll holdovers -optional Ÿ Safety enclosure serves as chip guard and greatly reduces noiseMOULDERS compactseries Ÿ Dual digital readout available for radial setting (NS & Tops) Unjoited Moulders Ÿ REC-705B Quik-TrueSet Setworks optional Ÿ Universal head or rip section optional Ÿ 4 to 9 heads - 7\" (180mm), 9\" (230mm), 10.2\" (260mm), 12\" Ÿ Safety enclosure serves as chip guard and greatly reduced (305mm) & 13\" (330mm) widths; 6\" (1 52mm) to 1 O\" (254mm) thickness noise Ÿ One piece cast iron or steel machine frame specially heat treated & stress relieved Ÿ 1-1/2\" (40mm), 1-13/16\" (50mm) diameter spindles standard Ÿ SKF ABEC 6 precision spindle bearings throughout (4 per spindle) Ÿ 6000, 7200 RPM optional Ÿ Each spindle is driven by individual motors Ÿ Tables are hard chrome plated Ÿ Full cardan shaft drive with feed speeds up to 82 FPM Ÿ Top rolls variable pneumatic tensioned Ÿ Full width bottom driven bedrolls Ÿ Pneumatic tension to chipbreakers & roll holdovers Easy head adjustment by mechanical digital readouts Platinum series Ÿ Full cardan shaft drive, VFD & feed speeds to 120 FPM Dual digital readout for radial setting (NS&Tops) Unjoited Moulders Ÿ REC 705B Quik-TureSet Setworks optional High Speed Spindles Ÿ Universal head and/or rip saw section optional Ÿ Safety enclosure serves as chip guard and greatly reduces Ÿ 4 to 9 heads & 9\" (230mm), 10.2\" (260mm) & 12\" (305mm) widths; 6\" (152mm), 8\" (203mm) or 1 O\" (254mm) thickness noise Ÿ One piece machine frame specially heat treated & stress relieved Ÿ Tables are hard chrome plated 1-1/2\" (40mm), 1-13/16\" (50mm) or 2-1/8\" (54mm) spindles Ÿ RHP ABEC 7 precision spindle bearings throughout (4 per spindle) Ÿ 7200 or 8000 RPM spindle speeds Ÿ Hydro-Loe outboards - optional (on wider machines) Ÿ Pneumatic tension to chipbreakers & roll holdovers Ÿ Top rolls variable pneumatic pressure Ÿ Full width bottom driven bedrolls (infeed. outfeed & midfeed) All specifications, dimensions and design characteristics are subject to change without notice.

2 Mouldersplanermac seriesHeavy-Duty Unjoited& Jointed MouldersŸ 4 to 9 heads and18\" (460mm) & 24\" (610mm) widths Ÿ Quick electronic setup - standardŸ 6\" (152mm),8\" (203mm), 1 O\" (254mm), 12\" (305mm) & 14\" Ÿ REC 705B Quik-TureSet electronic setworks for top heads (356mm) thickness capacities and near side head - standard equipmentŸ One piece machine frame specially heat treated & stress Ÿ Universal head and/or rip saw section optional Ÿ Safety enclosure serves as chip guard and greatly reduces relievedŸ 50mm, 1-13/16\", 40mm or 2-1/8\" spindles noiseŸ SKF ABEC 6 precision spindle bearings throughout (4 per HYPERMAC series spindle)Ÿ 5500 RPM spindle speedŸ With Hydro-Loe, outboards on horizontalsŸ Straight and/or profile jointers throughout - optional Full cardan shaft drive, VFD & feed speeds to 80 or 120 FPM - optionalŸ Tables are hard chrome platedHeavy-Duty Unjoited& Jointed MouldersŸ 9\" (230mm), 10.2\" (260mm), 12\" (305mm) & 13\" (330mm) Ÿ Quick electronic setup - standard. REC-705B Quik-True set MOULDERS widths; 6\" (1 52mm), 8\" (203mm) or 1 O\" (254mm) thickness; electronic setworks for top heads and near side head - 2 to 1 O heads standard equipment Universal head and/or rip saw section optionalŸ 1 piece machine frame specially heat treated & stress relieved Ÿ New touch screen control - memory & fastest setup - optional (tied to grinding room measuring station, if desired). AlsoŸ 50mm, 1-13/16\", 40mm or 2-1/8\" spindles includes dual digital position readouts at each head positionŸ 6000, 7200 or 8000 RPM spindle speeds for fastest setupŸ RHP ABEC 7 precision spindle bearings throughout (4 per spindle)Ÿ With or without Hydro-Loe outboards on on on horizontalsŸ Straight and/or profile jointers throughout - optionalŸ Top rolls - variable pneumatic tensionŸ Powered full width bottom rolls throughout Full cardan shaft drive, VFD & feed speeds to 120 FPM (150 to 200 FPM - opt.)Ÿ Tables are hard chrome platedSPEEDMAC series Ÿ Universal head and/or rip saw section optional Ÿ New touch screen control - memory & fastest setup -optionalHeavy-Duty Jointed Moulders (tied to grinding room measuring station, if desired). AlsoŸ 9\" (230mm) and 10.2\" (260mm) widths; 6\" (1 52mm), includes dual digital position readouts at each head position 8\" (203mm) or 1 O\" (254mm) thickness; 4 to 10 headsŸ 1 piece machine frame specially heat treated & - stress relievedŸ 1-13/16\", 50mm or 2-1/8\" spindlesŸ 6000 or 7200 RPM spindle speedsŸ RHP ABEC 7 precision spindle bearings throughout (4 per spindle)Ÿ Hydro-Loe outboards on all horizontalsŸ Top rolls variable pneumatic tensionŸ Full width bottom driven bedrolls - throughout Straight and/or profile jointers throughoutŸ Full cardan shaft drive, VFD & feed speeds to 200, 265 or 300 FPMŸ Tables are hard chrome platedŸ Quick electronic setup - standard. REC-705B Quik- True set electronic setworks for top heads and near side head - standard equipment

Moulders 3 Maximac series Ÿ Quick electronic setup - standard. REC-705B Quik-True set electronic setworks for top heads and near side head - Heavy-Duty Unjoited Standard equipment & Jointed Moulders Ÿ Universal head and/or rip saw section optional Ÿ 12\" (305mm) or 13\" (330mm) widths; 6\" (152mm), 8\" Ÿ New touch screen control - memory & fastest setup - (203mm) or 1 0\" (254mm) thickness; 2 to 1 0 heads optional (tied to grinding room measuring station, if desired) Ÿ 1 piece machine frame specially heat treated & stress Ÿ Also includes dual digital position readouts at each head relieved position for fastest setup Ÿ 50mm, 1-13/16\", 40mm or 2-1/8\" spindles RHP ABEC 7 precision spindle bearings throughout (4 per spindle)- THUNDERMAC series standard Ÿ 6000, 7200 or 8000 RPM spindle speeds Ÿ With or without Hydro-Loe outboards on horizontals Ÿ Top rolls variable pneumatic tension Ÿ Full width bottom driven bedrolls - throughout Straight and/or profile jointers throughout - optional Ÿ Full cardan shaft drive, VFD & feed speeds to 160, 200, 265 or 300 FPM Ÿ Tables are hard chrome plated High Speed Jointed MouldersMOULDERS Ÿ 9\" (230mm), 12\" (305mm) & 13\" (330mm) widths; 6\" Ÿ Quick electronic setup - standard. REC-705B Quick-True set (152mm), or 8\" (203mm) thickness; 4 to 10 heads electronic setworks for top heads and near side head - Standard equipment Ÿ 1 piece machine frame specially heat treated & stress relieved Ÿ Dual digital readout for radial setting Ÿ Universal head and/or rip saw section optional Ÿ 1-13/16\", (50mm) or 2-1/8\" (54mm) spindles Ÿ New touch screen control - memory & fastest setup - Ÿ 6000, 7200 or 8000 Ÿ RPM spindle speeds RHP ABEC 7 precision spindle optional (tied to grinding room measuring station, if desired) Ÿ Also includes dual digital position readouts at each head bearings throughout (4 per spindle) Ÿ Hydro-Loe outboards on all . horizontals Ÿ Straight and/or profile jointers throughout Ÿ Top rolls variable pneumatic tension Ÿ Full width bottom driven bedrolls Ÿ Full cardan shaft drive, VFD & feed speeds up to 400, 500 or 600 FPM (Thundermac+ to 800 or 1000 FPM) Ÿ Tables are hard chrome plated SUPER THUNDERMACseries Highest Speed Jointed Moulders Ÿ Working width (with a head cutting circle of 140mm) 30-300mm Ÿ Working thickness (with a head cutting circle of 163mm) 20-1 S0mm Ÿ 5 to 1 0 Spindles Ÿ Feed speed, infinitely variable by frequency driven motor 20- 200m/min (26-260 fpm) Ÿ 1 piece machine frame specially heat treated & stress relieved Ÿ 1-13/16\", (50mm) or 2-3/8\" (60mm) spindles Ÿ 6000 RPM spindle speeds Ÿ RHP ABEC 7 precision spindle bearings throughout (4 per spindle) Ÿ Hydro-Loe outboards on all horizontals Ÿ Straight and/or profile jointers throughout Ÿ Quik-True set electronic setworks for top heads and near Ÿ Top rolls variable pneumatic tension side head - standard equipment Ÿ Full width bottom driven bedrolls Ÿ 17\" LCD colorful touch-sensing screen control -memory & Ÿ Full cardan shaft drive, VFD & feed speeds up to 800 or 1 000 fastest setup FPM (OPT.) Ÿ Rip saw section optional Ÿ Tables are hard chrome plated Ÿ Also includes PC dual digital position readouts at each head position for fastest setup

4 MouldersGRINDERMAC series G320A Ÿ Cutter rotation is automatically controlled by PLC for high accuracy. Ÿ Grinding head movement is automatically controlled by PLC, ensuring high grinding accuracy. Ÿ Humanified touch-sensing screen allows for convenient operation. Ÿ Multiple micro-switches protection upgrades operational safety. Ÿ Hydraulic system controls the slide movement rightward/ leftward, featuring maximum stability. Ÿ Automatic or manual movement of slide is quick to change. Ÿ The entire machine is thoroughly protected by safety guards to achieve higher safety. Ÿ Fast cutterhead change saves considerable time while upgrading efficiency. Ÿ The control panel offers simple setting of tool parameters that saves cutter setting time. Ÿ Movable working light for added convenience. Ÿ Max. length of Cutterhead:Conventional cutterhead (by nut locking): 12.6\" (320mm) Ÿ Hydraulic cutterhead (by hydraulic bushing locking): 12.6\" (320mm) Ÿ Max. diameter of cutter: 12.6\" (320mm) Ÿ Min. diameter of cutter:5\" (125mm) Ÿ Max. knife numbers:32G320P G320PS MOULDERSŸ For profile knives. Ÿ For profile and straight knives.Ÿ Allows for grinding a cutterhead with 2, 4, 6, 8 or more knives. The Ÿ Allows for grinding a cutterhead with 2, 4, 6, 8 or more knives. The ground cutterhead can be directly mounted on the machine without ground cutterhead can be directly mounted on the machine without need of further adjustment of knives. need of further adjustment of knives.Ÿ Speed change control: Available to equip with speed control for Ÿ Speed change control: Available to equip with speed control for adjusting grinding wheel speed suitable for various types of knives. adjustingŸ Rotary type tracing rod assembly: Choice of various shapes of Ÿ grinding wheel speed suitable for various types of knives. tracing rod to suit complicated knife profile. Ÿ Rotary type tracing rod assembly: Choice of various shapes ofŸ Curve shaped slide: When changing grinding angle, it is not tracing rod to suit complicated knife profile. necessary to dress the grinding wheel to return to dressing reference Ÿ Curve shaped slide: When changing grinding angle, it is not and adjust gap of tool rest. When the grinding wheel diameter necessary to dress the grinding wheel to return to dressing reference decreases, it is convenient to adjust the gap of tool rest. and adjust gap of tool rest. When the grinding wheel diameterŸ Grinding wheel clamp&micrometric adjustment of wheel arbor: decreases, it is convenient to adjust the gap of tool rest. Provide fast adjustment of grinding wheel to keep it at the original Ÿ Grinding wheel dresser: Provide fast dressing of grinding wheel to a dressing position. shape complying with that of the tracing rod. Also suitable forŸ Tiltign grinding reset device: It allows for accurate and fast correcting wear of the grinding wheel. When the grinding wheel positioning after tilting grinding has been performed. diameter decreases, no additional calibration is required.Ÿ Max. length of cutterhead:Using locking collars:12.6\" (320mm), Ÿ Tiltign grinding reset device: It allows for accurate and fa tŸ Hydro locking block:13.4\" (340mm) positioning after tilting grinding has been performed.Ÿ Max. cutting circle: 13.8\" (350mm) Ÿ Two machines in one: This machine is also capable of grindingŸ Min. cutting circle:2.75\" (70mm) various straight knives. Easy to convert without need of changingŸ Max. depth of profile:1.57\" (40mm) any part. Ÿ Optional powered adjsutment: This function eliminates manual adjustment for added convenience. Ÿ Max. length of cutterhead: Using locking collars:12.6\" (320mm), Hydro locking block: 13.4\" (340mm), Solid profile:9.6\" (245mm) Ÿ Max. cttting circle: Profile grinding: 13.8\" (350mm), Straight knife: 11 .8\" (300mm), Solid profile:11.8\" (300mm) Ÿ Min. cutting circle: All type:2.75\" (70mm) Ÿ Max. depth of profile: 1.57\" (40mm) Tool Calibration DeviceTool Image A tool calibration device can be supplied for theInspection Device convenient and accurate calibration of each cutterhead, thus ensuring perfect cutterhead running

Diseño y Maquetación:Antonio Salas © 2018www.logika.com.mx Maquinaria Forestal y para la Transformación de la Madera +52 (228) 141.6060 [email protected] www.mahego.com