Touchless Automated Environment

PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 6-3/4” QUADRAT B AB1953 6 x 1.5 AA 351110 [170mm] QUADRAT E AB1953 Batteries 351210 6-1/8” 9V Transformer [155mm] Concealed Ø7/8” installation [23mm] with open wall Ø1/8” condition with [3mm] full rear access 1-1/2” such as a [38mm] service chase. 6 x 1.5 AA 8-5/8” Batteries [220mm] 9V Transformer 8-1/8” [205mm] QUADRAT LB AB1953 Concealed 351115 Ø7/8” QUADRAT LE AB1953 installation 351215 [23mm] with open wall Ø1/8” condition with [3mm] full rear access 1-1/2” such as a [38mm] service chase. Long spout 220 mm 2-3/8” - 3-3/8” 1-1/2” [60-85mm] [38mm] 6-3/4” QUADRAT 2030 B Concealed 9V Battery 351315 [155mm] AB1953 installation in 9V Transformer 351415 6-1/8” hollow framed [170mm] QUADRAT 2030 E walls providing AB1953 connection G-1/2” access below the sink. 2-1/2” [63mm] QUADRAT 2030 LB Concealed 9V Battery 351325 7/8” 1-1/2” AB1953 installation in 9V Transformer 351425 [23mm] 2-3/8” - 3-3/8” [38mm] hollow framed [60-85mm] QUADRAT 2030 LE walls providing G-1/2” 8-5/8” AB1953 connection G-3/4” [220mm] access below 8-1/8” the sink. G-1/2” [205mm] G-3/4” Long spout G-1/2” 220 mm 7/8” [23mm] 2-1/2” [63mm] 40

APOLLO AL SERIES Electronic wall mounted faucet operated by IR sensor. For cold or premixed water. Includes options for wave or prox operation, and accessories for brick wall installation. Advantages: • Drastically reduces water consumption • No physical contact. Helps to protect users against cross contamination • Concealed installation. • Sensor settings adjustable by remote control • Easy installation LEED RATING STERN MEDICAL WAVE & PROX OPTIONS WATER SAVING OPTIONS 0.5 GPM PCA Spray Standard 0.35 GPM PCA Spray Optional PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER APOLLO ALB 6 X 1.5V AA 340600 G-1/2” APOLLO ALE Batteries 340700 Concealed installation with open wall condition with full rear access such as a service chase. Default Wave activation: Once 70° the users place their hands at a 5-1/2” close proximity to the sensor. [140mm] Water will shut off if the users Max 7/8” place their hands at a close [Max 22mm] Ø1-3/8” proximity to the sensor again or [35mm] once a factory set flow time of Ø2-1/8” 8 seconds will pass. The flow [55mm] time is adjustable on site by remote control. Optional Prox activation: Automatic activation when the users bring their hands within the sensor range, and stops when the users remove their hands. 9V Transformer 41 WALL MOUNTED FAUCETS

APOLLO FREE SERIES Electronic wall mounted faucet operated by IR sensor. Powered by an internal 9V battery. For cold or premixed water. Advantages: • Drastically reduces water consumption • No physical contact. Helps to protect users against cross contamination • Since the sensor, solenoid and battery are inside the body, servicing is extremely easy • Ideal for retrofit projects • Sensor settings adjustable by remote control • Easy installation LEED RATING WATER SAVING OPTIONS 0.5 GPM PCA Spray Standard 0.35 GPM PCA Spray Optional PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE NUMBER DRAWING APOLLO FREE Exposed installation 9V Battery 340100 8-7/8” G-1/2” [226mm] Ø2-1/4” [58mm] 4-1/8” [104mm] 6-1/4” 2” [159mm] [50mm] Ø2” [50mm] 42

MEDICAL SERIES Electronic wall mounted faucet 0perated by IR sensor. Features an integrated thermostatic mixer to prevent scalding operation and temperature control. Advantages: • Drastically reduces water consumption • No physical contact. Helps to protect users against cross contamination • Thermostatic control for optimum temperature • Ideal for healthcare institutions • Chrome plated brass body with metallic thermostatic handle • Ideal for retrofit installations • Sensor settings adjustable by remote control • Internal solenoid valve • Easy installation LEED RATING STERN MEDICAL PREVENT SCALDING WATER SAVING OPTIONS 0.5 GPM PCA Spray Standard 0.35 GPM PCA Spray Optional PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER APOLLO MEDICAL 9V Battery 314535 2” 11-1/4” FB LF [50mm] [286mm] Ø-1/2” 5-7/8” [13mm] [150mm] G-3/4” G-3/4” Exposed 3-1/8” installation [78mm] Gooseneck spout APOLLO MEDICAL 9V 314545 Ø2” FE LF Transformer [50mm] APOLLO 9V Battery 314505 2” 5-7/8” MEDICAL B LF [50mm] [150mm] Ø-1/2” G-3/4” G-3/4” APOLLO [13mm] MEDICAL E LF Exposed installation Swivel spout 9V 314515 Transformer 43 WALL MOUNTED FAUCETS

9V BATTERY ESCUTCHEON ECCENTRIC THERMOSTATIC COVER CARTRIDGE INTEGRATED WITH A HOT LIMIT STOPPER METAL THERMOSTATIC MIXING HANDLE BAT T E RY COVER INTEROPERABLE SOLENOID VALVE FULL BRASS FAUCET BODY REMOTE CONTROL IR SENSOR: a. Body recognition program b. Sensor functions adjustable by remote control c. Various hygiene flush options available 44

SOAP, WATER & AIR FRAME SETS Iron mounting frame set. Touch free soap dispenser, touch free faucet and hi-speed hand dryer for public bathroom use. Operated by IR sensor. The system includes mounting support for the washbasin, faucet, soap dispenser and hand dryer, available with full brass body or AISI316 material. Advantages: • Drastically reduces water consumption • No physical contact. Helps to protect users against cross contamination • Minimizes hand washing drips to floors and counters • Provides a complete electronic soap, water and air experience as well as the complete installation package • Contains 9 mm holes for use in wood frame construction • Galvanized leg support, adjustable height up to 7.8” (200 mm) • Powder coated, blue color • Retractable leg supports to 1.96” (50 mm) • Rotating foot plate • Supplied with all the needed fixing accesories • Protection cover that protects the service opening against moisture and dirt and can be cut to length • Frame with C profile 1.57” (40/40 mm) • Frame height from 44.8 x 52.7” (1140 mm to 1340 mm) • Modular. Option to order with soap dispenser, faucet or hand dryer only or any combination LEED RATING PICTURE PRODUCT NAME POWER SUPPLY CODE DRAWING NUMBER Ø1-3/4” 19-5/8” Ø1-1/8” [45mm] [500mm] [28mm] 5-7/8” 5-7/8” [150mm] [150mm] Ø1-1/2” [38mm] TUBULAR DP TRIO KE 12V Transformer 500120 34-5/8” and power splitter [881mm] Min 3/8” Min 4-3/4” Max 7 7/8” [Min 120mm] [Min 10mm] [Max 200mm] 19-5/8” [500mm] Min 2-3/8”, Max 14-1/8” [Min 60mm],[Max 360mm] D28 DP SOAP&WATER KE 12V Transformer 500100 34-3/4” and power splitter [883mm] 24/4” [610mm] Min 3/8” Min 4-3/4” Max 7 7/8” [Min 120mm] [Min 10mm] [Max 200mm] 19-5/8” Max 2” [500mm] Min 7/8” [Max51mm] 5-7/8” [Min 21mm] [150mm] TUBULAR DP SOAP&WATER KE 12V Transformer 500200 34-3/4” and power splitter [883mm] 24/4” [610mm] Min 3/8” Min 4-3/4” Max 7 7/8” [Min 120mm] [Min 10mm] [Max 200mm] 45 WALL MOUNTED FAUCETS

PICTURE PRODUCT NAME POWER SUPPLY CODE DRAWING NUMBER 19-5/8” Min 2-3/8” [500mm] Max 14-1/8” [Min 60mm] 1-1/2” [Max 360mm] [38mm] 2-3/8” 1-5/8” [60mm] [40mm] QUADRAT DP 12V Transformer 500400 34-3/4” 24” SOAP&WATER KE and power splitter [882mm] [610mm] Min 3/8” Min 4-3/4” Max 7-7/8” [120mm] [Min 10mm] [Max 200mm] 9mm-25 19-5/8” [500mm] 5-7/8” [150mm] G-1/2” MALMO 1000 DP 12V Transformer 500350 34-3/4” 24” SOAP&WATER KE and power splitter [882mm] [610mm] Min 3/8” Min 4-3/4” Max 7-7/8” [120mm] [Min 10mm] [Max 200mm] D28 DP ELECTRONIC FAUCET TUBULAR ELECTRONIC SOAP DISPENSER MOUNTING FRAME WITH INSTALLATION * SINK NOT INCLUDED ACCESSORIES 1 LITER SOAP BOTTLE WITH DUAL POWER INPUT BOX WITH PERISTALTIC PUMP AND INTEGRATED OPTIONAL BACK UP SUPPORT SYSTEM 46 46 REMOTE CONTROL

FOOT WASHFREE Electronically operated self closing foot washer operated by touch. Operated by a Piezo element integrated in the foot washer cap. For cold or premixed water. Advantages: • Drastically reduces water consumption • No moving parts, ideal for heavy duty areas • Non hold open feature • More possibilities to save water: the water flow can be stopped in the middle of the cycle • Stable and accurate water flow that can be changed on site • Ideal for swiming pools, beaches and ritual foot washing • Heavy duty chrome plated brass construction • Silicone nozzles for easy cleaning • Easy installation WATER SAVING OPTIONS 9 LPM 2.38 GPM FLOW RESTRICTOR 7 LPM 6 LPM 1.85 GPM FLOW RESTRICTOR LEED RATING 1.59 GPM FLOW RESTRICTOR PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE NUMBER DRAWING Ø1-5/8” [40mm] G-1/2” 5-1/2” [140mm] FOOT WASHFREE Exposed installation Internal 9V battery 113730 2” Ø1/2” [52mm] [13mm] 15° Ø1-7/8” [48mm] Ø2-1/8” [55mm] Ø1-5/8” [40mm] 5-1/2” G-1/2” [140mm] Ø2-1/4” [57mm] FOOT WASHFREE 3000 Exposed installation. Internal 9V battery 113720 Directional shower head 2-1/2” [64mm] 2” [52mm] Ø1-5/8” [42mm] 47 WALL MOUNTED FAUCETS

Self closing electronic piezo button for soft touch activation Internal battery ideal for refurbishments, no electricity points needed Easily accessible internal solenoid valve not exposed to the public Solid brass body suitable for heavy Built in filter to optimize funtionality duty locations Internal flow restrictor for extra water savings Wall mounted rosette Full brass directional shower head Regulating valve to adjust the water flow Easily cleanable silicone nozzles FOOT WASHFREE 3000 48

SOAP DISPENSERS 49-80 49 SOAP DISPENSERS

CSABA 51-53 TRENDY 54-56 EXTREME 57-59 ELITE AISI316 60-63 LOTUS 64 GREEN 28 65-66 CLASSIC 67-68 EXTREME CS 69-70 TUBULAR 71-74 QUADRAT 75-76 MULTIFEED KITS & 77-80 UNDERBASIN MF CABINET 50

MAKE YOUR SOAP DISPENSER SELECTION INDIVIDUAL 33.8 FL OZ DISPENSER INDIVIDUAL 1.6 GALLON DISPENSER INDIVIDUAL 1.6 GALLON DISPENSER WITH SOAP LEVEL INDICATOR (AVAILBLE ON SELECTED MODELS ONLY) 33.8 FL OZ (1L) BOTTLE 1.6 GALLON TANK Lockable cabinet with or Stainless Steel support level indicator window Battery box or 12V transformer Optional remote control 51 SOAP DISPENSERS

UP TO SIX SOAP OUTLETS FOR MULTIFEED SYSTEM SELECT QUANTITY TOUCHLESS SOAP DISPENSER FOR USE WITH MULTIFEED KIT TO CONNECT UP TO 6 SOAP DISPENSERS WITH ONE TANK 1.6 GALLON TANK Lockable cabinet with or Stainless Steel support level indicator window TOP FILL KIT WITH SOAP TOP FILL KIT BELOW DECK KIT TOP FILL KIT WITH SOAP TOP FILL KIT BELOW DECK KIT LEVEL INDICATOR LEVEL INDICATOR 12V transformer Optional remote control 5502

CSABA SOAP DISPENSER Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Concealed IR sensor integrated into the spout • Peristaltic pump Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 8-1/8” [207mm] CSABA Battery box for 233110 5-1/2” 2-7/8” Ø1” SOAP DISPENSER B six (6) [139mm] [74mm] [25mm] Ø2” D batteries [50mm] Ø1/8” 1-7/8” 1-1/8” [3mm] [47mm] [28mm] Ø5/8” [17mm] Delivers liquid soap CSABA 12V Transformer 233100 6-1/4” SOAP DISPENSER E [160mm] Ø3-1/8” 12-7/8” [90mm] [326mm] 1-1/2” [38mm] 8-1/8” 2-7/8” Ø1/8” Ø1” 5-1/2” [207mm] [74mm] [3mm] [25mm] [139mm] Ø2” 1-7/8”[50mm] 1-1/8” [47mm] [28mm] Ø5/8” [17mm] CSABA FOAM E Delivers foam soap 12V Transformer 233120 6-1/4” Ø3-1/8” [160mm] [90mm] 12-7/8” [326mm] 1-1/2” [38mm] 51 SOAP DISPENSERS

1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 8-1/8” Ø1” [207mm] [25mm] 5-1/2” MF CSABA Delivers liquid soap 12V Transformer 07292288 [139mm]2-7/8”Ø1/8” 1-1/8” SOAP DISPENSER 1-7/8”[74mm][3mm][28mm] Deck mounted touch free electronic [47mm] Ø5/8” soap dispenser to be used with Stern’s Ø2” [17mm] Multifeed kits for multiple soap [50mm] dispensers installation 2-7/8” Ø1” [74mm] [25mm] Ø2”5-1/2” [50mm][139mm]Ø1/8” 1-1/8” 1-7/8”[3mm] [28mm] [47mm] Ø5/8” [17mm] CSABA SD 1.6 E Delivers liquid soap 12V Transformer 233102 1.6 gallon (6L) tank kit for an individual soap dispenser 10-3/4” 5-1/8” [274mm] [130mm] 3-1/2” [90mm] 8-7/8” 5-5/8” [224mm] [144mm] 52

NEW! CSABA SOAP DISPENSER WITH SOAP LEVEL INDICATOR Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Soap level indicator shows green when soap tank is full, orange when soap level is low and red when a refill is needed. • Concealed IR sensor integrated into the spout • Peristaltic pump • 1.6 US gallon (6L) soap tank Advantages: • Reduces maintenance costs - no need to open the cabinet to check soap level. • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable -Designed for heavy traffic locations • Matching IR operated faucet STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 5-5/8” 2-7/8” Ø1/8” Ø1” [142mm] [74mm] [3mm] [25mm] Ø2” Ø5/8” [50mm] [17mm] 1-3/4” [44mm] CSABA Delivers liquid soap 12V transformer 233105 SOAP DISPENSER E WITH LEVEL INDICATOR 11-5/8” 3-1/2” 5-1/8” [295mm] [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 53 SOAP DISPENSERS

TRENDY SOAP DISPENSER Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Chrome plated brass body • Peristaltic pump • Adjustable settings Options: • Tall version for counter top sink • Anti-rotation pin • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 1-1/2” [38mm] Battery box for 2-7/8” 4-1/8” L=3-1/2” Ø1/8” six (6) [72mm] [104mm] [L=90mm] [4mm] 3/4” TRENDY SOAP DISPENSER B D batteries 239910 2-3/8” [19mm] [62mm] 0-2” [0-52mm] Delivers liquid soap 6-1/4” 13-1/8” [160mm] [332mm] TRENDY SOAP DISPENSER E 12V Transformer 239900 3-1/2” [90mm] 1-1/2” [38mm] 2-5/8” Ø1-1/2” [68mm] [38mm] 4-1/8” [0-52mm] [104mm] 2-5/8” 0-2” [67mm] 6-3/4” [170mm] TRENDY FOAM E Delivers foam soap 12V Transformer 239930 6-1/4” 13-1/8” [160mm] [332mm] 1-1/2” Ø3-1/2” [38mm] [90mm] 54

STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER TRENDY SOAP DISPENSER Battery box for 239912 10-5/8” 2-3/8” 12” Ø1-1/2” PLUS B six (6) [271mm] [62mm] [304mm] [38mm] Ø-1/8” TRENDY SOAP DISPENSER D batteries [4mm] PLUS E Delivers liquid 0-2” 3/4” soap [0-52mm] [19mm] Tall version: Ø3-1/2”13-1/8” 12” (304 mm) [90mm][332mm] body 12V Transformer 239902 6-1/4” [160mm] 1-1/2” [38mm] 1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER MF TRENDY SOAP DISPENSER Delivers liquid soap Ø1-1/2” [38mm] Deck mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits for multiple 12V Transformer 07292073 4-1/8” soap dispensers installation [104mm] 2-7/8” 2-3/8” Ø1/8” [72mm] [61mm] [4mm] 3/4” Delivers foam soap 0-2” [19mm] [0-52mm] Deck mounted touch free electronic foam dispenser MF TRENDY to be used with Stern’s Multifeed kits for multiple 12V Transformer 07292183 FOAM DISPENSER soap dispensers installation 2-3/4” 12” Ø1-1/2” [70mm] [304mm] [38mm] Delivers liquid soap 10-3/4” Ø1/8” [272mm] [4mm] Deck mounted touch free electronic soap dispenser 3/4” MF TRENDY SD PLUS to be used with Stern’s Multifeed kits for multiple 12V Transformer 07292099 [19mm] soap dispensers installation 0-2” [0-52mm] 2-7/8” 4-1/8” Ø1-1/2” [72mm] [104mm] [38mm] 2-3/8” 0-2” Ø1/8” [61mm] [0-52mm] [4mm] 3/4” [19mm] TRENDY SD 1.6 E Delivers liquid soap 12V Transformer 239916 1.6 gallon (6L) tank kit for an individual soap dispenser 10-3/4” [274mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 55 SOAP DISPENSERS

NEW! TRENDY SOAP DISPENSER WITH SOAP LEVEL INDICATOR Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Soap level indicator shows green when soap tank is full, orange when soap level is low and red when a refill is needed. • Concealed IR sensor integrated into the spout • Peristaltic pump • 1.6 US gallon (6L) soap tank Advantages: • Reduces maintenance costs - no need to open the cabinet to check soap level. • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable -Designed for heavy traffic locations • Matching IR operated faucet STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 2-3/8” Ø1-1/2” [61mm] [38mm] 5/8” 2-7/8” [16mm] [73mm] 4-1/8” [106mm] 0-2” [0-52mm] Ø1/8” Ø1” [4mm] [25mm] TRENDY Delivers liquid soap 12V transformer 239906 SOAP DISPENSER E WITH LEVEL INDICATOR 11-5/8” [295mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 56

EXTREME SOAP DISPENSER Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Chrome plated brass body • Peristaltic pump • Adjustable settings Options: • Tall version for counter top sink • Anti-rotation pin • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL POWER SUPPLY CODE DRAWING FEATURES NUMBER Ø1-1/2” Battery box for 2-3/8” [38mm] 4-1/8”[0-52mm] [104mm] six (6) [60mm] 2-3/4” EXTREME SOAP DISPENSER B 237920 [70mm] D batteries Ø3-1/2”0-2” [90mm] Delivers liquid soap 6-1/4” 13-1/8” [160mm] [332mm] EXTREME SOAP DISPENSER E 12V Transformer 237900 1-1/2” [38mm] EXTREME SOAP DISPENSER Battery box for 237922 10-1/4” 2-3/4” Ø1-1/2” 12” PLUS B six (6) [260mm] [70mm] [38mm] [304mm] EXTREME SOAP DISPENSER D batteries Ø1” PLUS E [25mm] Delivers liquid 13-1/8” soap Ø3-1/2” [332mm] [90mm] Tall version: 12” (304 mm) body 12V Transformer 237905 6-1/4” [160mm] 1-1/2” [38mm] 57 SOAP DISPENSERS

1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER Ø1-1/2” 2-3/8” [38mm] 4-1/8” [60mm] 2-3/4” [104mm] [70mm] Delivers liquid soap MF EXTREME 12V Transformer 07292056 0-2” SOAP DISPENSER Deck mounted touch free electronic soap dispenser [0-52mm] to be used with Stern’s Multifeed kits for multiple soap dispensers installation 10-1/4” Ø1-1/2” 12” [260mm] [38mm] [304mm] 2-3/4” [70mm] MF EXTREME SD PLUS Delivers liquid soap 12V Transformer 07292095 Deck mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation 0-2” [0-52mm] 2-3/8” Ø1-1/2” [60mm] [38mm] 4-1/8”[0-52mm] [104mm] 2-3/4” 0-2” [70mm] EXTREME SD 1.6 E Delivers liquid soap 12V Transformer 237916 1.6 gallon (6L) tank kit for an individual soap dispenser 10-3/4” [274mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 58

NEW! EXTREME SOAP DISPENSER WITH SOAP LEVEL INDICATOR Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Soap level indicator shows green when soap tank is full, orange when soap level is low and red when a refill is needed. • Concealed IR sensor integrated into the spout • Peristaltic pump • 1.6 US gallon (6L) soap tank Advantages: • Reduces maintenance costs - no need to open the cabinet to check soap level. • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable -Designed for heavy traffic locations • Matching IR operated faucet STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 2-3/8” Ø1-1/2” [62mm] [38mm] 0-2” [0-52mm] 5/8” Ø1/8” Ø1” [16mm] [4mm] [25mm] EXTEREME SOAP Delivers liquid soap 12V transformer 237917 DISPENSER E WITH LEVEL INDICATOR 11-5/8” [295mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 59 SOAP DISPENSERS

ELITE SOAP DISPENSER AISI316 Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Stainless steel AISI316 body • Peristaltic pump • Adjustable settings Options: • Tall version for counter top sink • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet • Aletrnative 4.4” (112mm) long spout Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL POWER SUPPLY CODE DRAWING FEATURES NUMBER 3-3/8” [84mm] 1-1/2” [38mm] ELITE SOAP DISPENSER B Battery box for 3-1/2” 4-1/8” [0-52mm] [104mm] AISI316 six (6) [89mm] 236113 ELITE SOAP DISPENSER E D batteries AISI316 0-2” Delivers liquid soap Stainless Steel AISI 316 body 12V Transformer 236103 6-1/4” [160mm] 13-1/8” [332mm] 1-1/2” [38mm] Ø1-1/2” [38mm] Delivers foam 3-3/8” 4-1/8”[0-52mm] [104mm] soap [85mm] ELITE FOAM E AISI316 Stainless Steel 236122 3-3/8” 0-2” AISI 316 body [84mm] 6-3/4” [170mm] 12V Transformer ELITE FOAM E Delivers foam 236120 6-1/4” soap [160mm] Chrome plated 13-1/8” brass body [332mm] 1-1/2” Ø3-1/2” [38mm] [90mm] 60

STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER ELITE SOAP DISPENSER PLUS Battery box for 236109 B AISI316 six (6) Delivers liquid ELITE SOAP DISPENSER PLUS soap D batteries E AISI316 Tall version: 11-3/8” Ø1-1/2” 12” (304 mm) [289mm] [38mm] body 3-3/8” [84mm] Stainless Steel Ø1” AISI 316 body [25mm] 12V Transformer 236104 12” [304mm] 0-2” [0-52mm] ELITE SOAP DISPENSER PLUS B Battery box for 236107 6-1/4” 12-7/8” six (6) [160mm] [326mm] Delivers liquid D batteries Ø3-1/2” soap [90mm] Tall version: 1-1/2” 12” (304 mm) [38mm] body Chrome plated brass body ELITE SOAP DISPENSER PLUS E 12V Transformer 236105 61 SOAP DISPENSERS

1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER MF ELITE SOAP DISPENSER AISI316 Delivers liquid soap 12V Transformer 07292239 Deck mounted touch free electronic soap dispenser 1-1/2” to be used with Stern’s Multifeed kits for multiple [38mm] soap dispensers installation Stainless Steel AISI 316 body Delivers liquid soap 3-1/2” 3-3/8” 4-1/8” [89mm] [84mm] [104mm] Deck mounted touch free electronic soap dispenser MF ELITE to be used with Stern’s Multifeed kits for multiple 12V Transformer 07292077 0-2” SOAP DISPENSER soap dispensers installation [0-52mm] Chrome plated brass body MF ELITE Delivers foam soap 12V Transformer 07292240 FOAM DISPENSER AISI316 Deck mounted touch free electronic foam dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation Stainless Steel AISI 316 body MF ELITE FOAM DISPENSER Delivers foam soap 12V Transformer 07292205 Deck mounted touch free electronic foam dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation Chrome plated brass body Delivers liquid soap Ø1-1/2” [38mm] Deck mounted touch free electronic soap dispenser MF ELITE SD PLUS AISI316 to be used with Stern’s Multifeed kits for multiple 12V Transformer 07292241 3-3/8” soap dispensers installation [84mm] Stainless Steel AISI 316 body 11-3/8” 12” [289mm] [304mm] Delivers liquid soap Ø1” 0-2” [25mm] [0-52mm] Deck mounted touch free electronic soap dispenser MF ELITE SD PLUS to be used with Stern’s Multifeed kits for multiple 12V Transformer 07292093 soap dispensers installation Chrome plated brass body ELITE SD 1.6 E AISI316 Delivers liquid soap 12V Transformer 236126 3-1/2” 4-1/8” Ø1-1/2” [89mm] [104mm] [38mm] 1.6 gallon (6L) tank kit for an individual soap dispenser 3-3/8” [84mm] Stainless Steel AISI 316 body 0-2” [0-52mm] Delivers liquid soap 10-3/4” [274mm] 1.6 gallon (6L) tank kit for an individual soap 3-1/2” 5-1/8” dispenser [90mm] [130mm] ELITE SD 1.6 E Chrome plated brass body 12V Transformer 236216 8-7/8” 5-5/8” [224mm] [144mm] 62

NEW! ELITE SOAP DISPENSER WITH SOAP LEVEL INDICATOR Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Soap level indicator shows green when soap tank is full, orange when soap level is low and red when a refill is needed. • Concealed IR sensor integrated into the spout • Peristaltic pump • 1.6 US gallon (6L) soap tank Advantages: • Reduces maintenance costs - no need to open the cabinet to check soap level. • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable -Designed for heavy traffic locations • Matching IR operated faucet STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 3-3/8” Ø1-1/2” [84mm] [38mm] 5/8” 3-3/8” [16mm] [87mm] 4-1/8” [106mm] 0-2” [0-52mm] Ø1/8” Ø1” [4mm] [25mm] ELITE Delivers liquid 12V transformer 236131 SOAP DISPENSER E soap WITH LEVEL INDICATOR 11-5/8” [295mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 63 SOAP DISPENSERS

LOTUS SOAP DISPENSER Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Chrome plated brass body • Peristaltic pump • Adjustable settings • Extra long direct spout Options: • Anti-rotation pin • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL POWER SUPPLY CODE DRAWING FEATURES NUMBER 4” [103mm] Ø1-1/8” [28mm] Battery box for 3” Ø1/8” 0-2” six (6) [75mm] [3mm] [0-52mm] Ø7/8” 2PLS [23mm] LOTUS SOAP DISPENSER B D batteries 230800 4-1/8” 1-3/8” [104mm] [33mm] Delivers liquid soap 6-1/4” 12-7/8” [160mm] [326mm] LOTUS SOAP DISPENSER E 12V Transformer 230810 Ø3-1/2” [90mm] 1-1/2” [38mm] 1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER Ø1-1/8” [28mm] Delivers liquid soap 3” [75mm] Deck mounted touch free electronic soap dispenser 0-2” to be used with Stern’s Multifeed kits for multiple [0-52mm] soap dispensers installation 4-1/8” [104mm] MF LOTUS SOAP DISPENSER 12V Transformer 07292329 1-3/8” Ø7/8” [33mm] [23mm] Ø1-1/8” 4-1/8” [28mm] [104mm] 3” 3-1/2” [75mm] [89mm] 1-3/8” Ø7/8” 0-2” [33mm] [23mm] [0-52mm] LOTUS SD 1.6 E Delivers liquid soap 12V Transformer 230820 1.6 gallon (6L) tank kit for an individual soap dispenser 10-3/4” [274mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 64

GREEN 28 SOAP DISPENSER Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Chrome plated brass body • Peristaltic pump • Adjustable settings Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable -Designed for heavy traffic locations 65 SOAP DISPENSERS

SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER GREEN 28 Battery box for 352900 3-1/2” Ø 1-1/8” SOAP DISPENSER B six (6) [89mm] [28mm] 3-5/8” Ø3/4” D batteries 4-3/8”[93mm] [19mm] [112mm] Delivers liquid soap 0-2” [0-52mm] Includes a brass base for abuse protection 13-1/8” in high traffic [332mm] locations GREEN 28 6-1/4” Ø 3-1/2” SOAP DISPENSER E [160mm] [90mm] 12V Transformer 352910 1-1/2” [38mm] 3-3/8” 50˚ Ø1-1/8” 0-2” [87mm] 3-7/8” [28mm] [0-52mm] [97mm] 2-3/4” Ø3/4” [70mm] [19mm] Delivers foam soap 6-3/4” [170mm] GREEN 28 FOAM E Includes a brass base 12V Transformer 352920 for abuse protection in high traffic locations 6-1/4” Ø3-1/2” [160mm] [90mm] 13-1/8” [332mm] 1-1/2” [38mm] 1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER MF GREEN 28 SOAP DISPENSER Delivers liquid soap 4-3/8” Ø1-1/8” [112mm] [28mm] Deck mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits for multiple soap 12V Transformer 07292155 3-1/2” 0-2” dispensers installation [89mm] [0-52mm] 3-5/8” 2-3/4” Ø3/8” [93mm] [70mm] [19mm] MF GREEN 28 Delivers foam soap 12V Transformer 07292206 FOAM DISPENSER Deck mounted touch free electronic foam dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation 3-1/2” Ø1-1/8” [89mm] [28mm] 4-3/8” Ø3/4” [112mm] [19mm] 2-3/4” [70mm] 0-2” [0-52mm] 3-5/8” [93mm] GREEN 28 SD 1.6 E Delivers liquid soap 12V Transformer 352916 1.6 gallon (6L) tank kit for an individual soap dispenser 10-3/4” [274mm] 3-1/2” 5-1/8” [90mm] [130mm] 8-7/8” 5-5/8” [224mm] [144mm] 66

CLASSIC SOAP DISPENSER Deck-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • One piece chrome plated brass body • Peristaltic pump • Adjustable settings • Concealed IR sensor integrated in the the spout Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (1L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 2-1/2” 3-1/4” 1-5/8” Ø1/8” 4-5/8” [63mm] [84mm] [41mm] [4mm] [118mm] 3/4” CLASSIC SOAP Battery box for 292400 [20mm] 1-7/8” DISPENSER B six (6) [47mm] CLASSIC SOAP Delivers liquid soap D batteries DISPENSER E Includes a brass base 6-1/4” for abuse protection [160mm] in high traffic locations 13-1/8” [332mm] Ø3-1/8” [90mm] 12V Transformer 292410 1-1/2” [38mm] 2-1/2” 1-5/8” Ø 1/8” 4-5/8” [63mm] [41mm] [4mm] [118mm] 3/4” 3-1/4” [20mm] 1-7/8” [84mm] [47mm] Delivers foam soap 6-3/4” [170mm] CLASSIC FOAM E Includes a brass base 12V Transformer 292300 for abuse protection in high traffic 13-1/8” locations [332mm] 6-1/4” 3-1/2” [160mm] [90mm] 1-1/2” [38mm] 67 SOAP DISPENSERS

1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER MF CLASSIC SOAP DISPENSER Delivers liquid soap 12V Transformer 07292177 Deck mounted touch free electronic 2-1/2” soap dispenser to be used with Stern’s [63mm] Multifeed kits for multiple soap dispensers installation 4-5/8” [118mm] Ø1/8” 3-1/4” 1-5/8” [4mm] 1-7/8” [84mm] [41mm] 3/4” [47mm] [20.5mm] MF CLASSIC Delivers foam soap 12V Transformer 07292207 FOAM DISPENSER Deck mounted touch free electronic foam dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation 2-1/2” [63mm] 4-5/8” [118mm] 3-1/4” 1-5/8” Ø1/8” [84mm] [41mm] [4mm] 3/4” [20mm] 1-7/8” [47mm] CLASSIC SD 1.6 E Delivers liquid soap 12V Transformer 292416 1.6 gallon (6L) tank kit for an individual soap dispenser 10-3/4” 5-1/8” [274mm] [130mm] 3-1/2” [90mm] 8-7/8” 5-5/8” [224mm] [144mm] 68

EXTREME CS SOAP DISPENSER Wall-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Chrome plated brass body • Concealed sensor integrated into the spout • IR sensor • Peristaltic pump Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSION PICTURE PRODUCT NAME MODEL FEATURES POWER CODE NUMBER DRAWING SUPPLY EXTREME CS Battery box 237891 5-7/8” SOAP DISPENSER B for six (6) [150mm] D batteries 3-1/2”G-3/8” [90mm]Ø2-1/2” 1-1/2” [65mm] [38mm] Delivers liquid soap 13-1/4” [338mm] Chrome plated brass 6-1/4” [160mm] Concealed installation with open wall condition with full rear access such as a service chase. EXTREME CS 12V 237890 SOAP DISPENSER E Transformer 69 SOAP DISPENSERS

EXTREME CS SOAP DISPENSER AISI316 Wall-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Stainless steel AISI316 spout • Concealed sensor integrated into the spout • IR sensor • Peristaltic pump Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSION PICTURE PRODUCT NAME MODEL FEATURES POWER CODE NUMBER DRAWING SUPPLY EXTREME CS Battery box 237891-316 5-7/8” SOAP DISPENSER B for six (6) [150mm] AISI316 D batteries G-3/8” Ø2-1/2” 3-1/2” [65mm] [90mm] 1-1/2” Delivers liquid soap 13-1/4”[38mm] [338mm] Stainless Steel AISI316 6-1/4” [160mm] Concealed installation with open wall condition with full rear access such as a service chase. EXTREME CS 12V 237890-316 SOAP DISPENSER E Transformer AISI316 70

TUBULAR SOAP DISPENSER Wall-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Chrome plated brass body • Peristaltic pump • Adjustable settings • IR sensor in dispenser spout Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER Ø7/8” [23mm] Ø1/8” [3mm] Ø1-3/4” [44mm] Ø1-1/8” [28mm] TUBULAR Battery box for 350920 2-3/4” 5-5/8” SOAP DISPENSER B six (6) 350925 [70mm] [144mm] 5-7/8” TUBULAR Delivers liquid soap D batteries [150mm] SOAP DISPENSER E Optional version: 120mm 13” [331mm] Concealed installation with 6-1/4” open wall condition with full [160mm] rear access such as a service chase 12V Transformer 3-1/2” [90mm] 1-1/2” [38mm] Max 1-5/8” [Max 40mm] 1” TUBULAR Battery box for 350922 [25mm] SOAP DISPENSER 2030 B six (6) Ø1-3/4” Delivers liquid soap D batteries [44mm] 1-1/8” Concealed installation [28mm] in hollow framed walls 5-5/8” 5-7/8” providing connection access [144mm] [150mm] below the sink. 13-1/4” TUBULAR 12V Transformer 350927 [338mm] 3-1/2” SOAP DISPENSER 2030 E 6-1/4” [90mm] [160mm] 1-1/2” [38mm] 71 SOAP DISPENSERS

STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 4-7/8” [123mm]Ø7/8” [23mm] 2-3/4” 4-1/2”Ø1-3/4” [70mm] [116mm][44mm] Ø1/8” Ø3-1/2” [3mm] [90mm] Ø1-1/8” [28mm] 1-1/2” TUBULAR FOAM E Delivers foam soap 12V Transformer 350980 [38mm] Optional version: 120mm 6-1/4” [160mm] Concealed installation with open wall condition with 13-1/8” full rear access such as [332mm] a service chase. 1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING MF TUBULAR SOAP DISPENSER NUMBER 5-7/8” Delivers liquid soap 12V Transformer 07292076 [150mm]Ø7/8” Wall mounted touch free electronic soap 2-3/4” 5-5/8”[23mm] dispenser to be used with Stern’s Multifeed kits [70mm] [144mm]Ø1-3/4” for multiple soap dispensers installation [44mm] Optional version: 120mm Max 1-5/8” Concealed installation with open wall condition Max [40mm] 5-7/8”Ø1/8” with full rear access such as a service chase. [3mm] [150mm] Ø1-1/8” 5-5/8” [28mm] [144mm] MF TUBULAR FOAM DISPENSER Delivers foam soap 12V Transformer 07292186 Wall mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation Optional version: 120mm Concealed installation with open wall condition with full rear access such as a service chase. MF TUBULAR SOAP Delivers liquid soap Ø1” DISPENSER 2030 [25mm] Wall mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits Ø1-1/8” for multiple soap dispensers installation [28mm] Optional version: 120mm 12V Transformer 07292081 Concealed installation in hollow framed walls providing connection access below the sink. Ø1-3/4” Ø7/8” 5-7/8” [44mm] [23mm] [150mm] Ø1-1/8” 2-3/4” 5-5/8” [28mm] Ø1/8” [70mm] [144mm] [3mm] TUBULAR SD 1.6 E Delivers liquid soap 12V Transformer 350116 1.6 gallon (6L) tank kit for an individual soap dispenser 5-1/8” 10-3/4” [130mm] [274mm] Optional version: 120mm Concealed installation with open wall condition with full rear access such as a service chase. 3-1/2” [90mm] 5-5/8” 8-7/8” [144mm] [224mm] MMaaxx[41-05m/8m”][155-07/m8m” ] 3-7/8” 5-5/8” [100mm] [144mm] 3-7/8” [100mm] Ø1-1/8” [28mm] Ø1-3/4” [44mm] TUBULAR 2030 SD 1.6 E Delivers liquid soap 12V Transformer 350816 1.6 gallon (6L) tank kit for an individual soap dispenser 5-1/8” 10-3/4” [130mm] [274mm] Optional version: 120mm Concealed installation in hollow framed walls providing connection access below the sink. 3-1/2” [90mm] 5-5/8” 8-7/8” [144mm] [224mm] 72

TUBULAR SOAP DISPENSER AISI316 Wall-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • Stainless Steel AISI316 product body • IR sensor in dispenser spout • Peristaltic pump • Adjustable settings Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER Ø7/8” [23mm] Ø1/8” [3mm] Ø1-3/4” [44mm] Ø1-1/8” [28mm] TUBULAR SD B AISI316 Battery box for 350919 2-3/4” 5-5/8” TUBULAR SD E AISI316 six (6) [70mm] [144mm] 5-7/8” D batteries [150mm] Delivers liquid soap 13” [331mm] Concealed installation 6-1/4” with open wall condition [160mm] with full rear access such as a service chase. 12V Transformer 350924 3-1/2” [90mm] 1-1/2” [38mm] Max 1-5/8” [Max 40mm] 1” TUBULAR SD 2030B Battery box for 350918 [25mm] AISI316 six (6) Ø1-3/4” TUBULAR SD 2030E D batteries [44mm] AISI316 1-1/8” [28mm] 5-5/8” 5-7/8” [144mm] [150mm] Delivers liquid soap 12-7/8” [336mm] Concealed installation 6-1/4” in hollow framed walls [160mm] providing connection access below the sink. 12V Transformer 350917 3-1/2” [90mm] 1-1/2” [38mm] 73 SOAP DISPENSERS

STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 4-7/8” [123mm]Ø7/8” [23mm] 2-3/4” 4-1/2”Ø1-3/4” [70mm] [116mm][44mm] Ø1/8” Ø3-1/2” [3mm] [90mm] Ø1-1/8” [28mm] 1-1/2” TUBULAR FOAM E Delivers foam soap 12V Transformer 350982 [38mm] AISI316 Concealed installation with open wall condition 6-1/4” with full rear access [160mm] such as a service chase. 13-1/8” [332mm] 1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER MF TUBULAR SOAP DISPENSER 5-7/8” AISI316 Delivers liquid soap 12V Transformer 07292221 [150mm]Ø7/8” Wall mounted touch free electronic soap 2-3/4” 5-5/8”[23mm] dispenser to be used with Stern’s Multifeed kits [70mm] [144mm]Ø1-3/4” for multiple soap dispensers installation [44mm] Concealed installation with open wall condition Max 1-5/8” with full rear access such as a service chase. Max [40mm] 5-7/8”Ø1/8” [3mm] [150mm] Ø1-1/8” 5-5/8” [28mm] [144mm] MF TUBULAR FOAM DISPENSER Delivers foam soap 12V Transformer 07292231 AISI316 Wall mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits for multiple soap dispensers installation Concealed installation with open wall condition with full rear access such as a service chase. MF TUBULAR SOAP Delivers liquid soap Ø1” DISPENSER 2030 AISI316 [25mm] Wall mounted touch free electronic soap dispenser to be used with Stern’s Multifeed kits Ø1-1/8” for multiple soap dispensers installation [28mm] Concealed installation in hollow framed walls 12V Transformer 07292222 providing connection access below the sink. Ø1-3/4” Ø7/8” 5-7/8” [44mm] [23mm] [150mm] Ø1-1/8” 2-3/4” 5-5/8” [28mm] Ø1/8” [70mm] [144mm] [3mm] TUBULAR SD 1.6 E Delivers liquid soap 12V Transformer 350932 AISI316 1.6 gallon (6L) tank kit for an individual soap dispenser Concealed installation with open wall condition with full rear access such as a service chase. 5-1/8” 10-3/4” [130mm] [274mm] 3-1/2” [90mm] 5-5/8” 8-7/8” [144mm] [224mm] 3-7/8” MMaaxx[41-05m/8m”][155-07/m8m” ] [100mm] 5-5/8” [144mm] 3-7/8” [100mm] Ø1-3/4” [44mm] Ø1-1/8” [28mm] TUBULAR 2030 SD 1.6 E Delivers liquid soap 12V Transformer 350916 AISI316 1.6 gallon (6L) tank kit for an individual soap dispenser 5-1/8” [130mm] Concealed installation in hollow framed walls providing connection access below the sink. 3-1/2” 10-3/4” [90mm] [274mm] 5-5/8” 8-7/8” [144mm] [224mm] 74

QUADRAT SOAP DISPENSER Wall-mounted touch-free electronic soap dispenser for non-proprietary soap Features: • 100% heavy-duty brass body • IR sensor in dispenser spout • Peristaltic pump • Adjustable settings Options: • 0.26 US gallon (1L) soap bottle • 1.6 US gallon (6L) soap tank • Multiple soap dispensers installation (up to six (6) dispensers) with a single 1.6 US gallon (6L) tank • Matching IR operated faucet Advantages: • Drastically reduces soap consumption. - Recommended soap viscosity 100-3800 cPs. - Recommended foam soap viscosity up to 100 cPs • Cross contamination protection - no physical contact • Clog and backflow prevention - with designated peristaltic pump • Accurate soap dosage - adjustable by remote control • Maximized savings - can be used with any non-proprietary soap • Easy to install and refill • Highly durable - Designed for heavy traffic locations STANDARD SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 7/8” [23mm] 1-5/8” [40mm] 1-1/8” [28mm] QUADRAT Battery box for six 351910 2-3/4” 4-5/8” SOAP DISPENSER B (6) [71mm] [118mm] 4-7/8” QUADRAT D batteries [124mm] SOAP DISPENSER E Delivers liquid soap 13” [331mm] Concealed 6-1/4” installation with open [160mm] wall condition with full rear access such as a service chase. 12V Transformer 351900 3-1/2” [90mm] 1-1/2” [38mm] Max 1-5/8” 4-7/8” [Max 40mm] [124mm] 4-5/8” [118mm] QUADRAT Battery box for six 351920 SOAP DISPENSER 2030 B (6) 1-” D batteries [25mm] 1-5/8” [40mm] 1-1/8” [28mm] Delivers liquid soap 13” [331mm] Concealed installation 6-1/4” in hollow framed walls [160mm] providing connection access below the sink. QUADRAT 12V Transformer 351930 SOAP DISPENSER 2030 E 3-1/2” [90mm] 1-1/2” [38mm] 75 SOAP DISPENSERS

1.6 GALLON (6L) SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE DRAWING NUMBER 4-7/8” [124mm] 4-5/8” [118mm] Delivers liquid soap Ø7/8” 2-3/4” [23mm] [71mm] Wall mounted touch free electronic soap 1-5/8” MF QUADRAT dispenser to be used with Stern’s Multifeed 12V Transformer 07292078 [40mm] SOAP DISPENSER kits for multiple soap dispensers installation 1-1/8” [28mm] Concealed installation with open wall condition with full rear access such as a service chase. Max 1-5/8” 4-7/8” Max [40mm] [124mm] Delivers liquid soap Ø1” [25mm] Wall mounted touch free electronic soap 1-1/8” dispenser to be used with Stern’s Multifeed [28mm] MF QUADRAT kits for multiple soap dispensers installation 4-5/8” SOAP DISPENSER 2030 [118mm] Concealed installation in hollow framed walls providing connection access below the sink. 12V Transformer 07292094 1-5/8” Ø7/8” 4-7/8” [40mm] [23mm] [124mm] 1-1/8” Ø1/8” 4-5/8” [28mm] [3mm] [118mm] 2-3/4” [71mm] QUADRAT SD 1.6 E Delivers liquid soap 12V Transformer 351916 1.6 gallon (6L) tank kit for an individual 3-1/2” 5-1/8” soap dispenser [90mm] [130mm] Concealed installation with open wall 10-3/4” condition with full rear access such as a [274mm] service chase. 5-5/8” 8-7/8” [144mm] [224mm] 3-7/8” [100mm] 2-3/4” [70mm] 2-3/8” [60mm] Ø1” [25mm] 1-1/8” [28mm] 1-5/8” Max 1-5/8” 4-7/8” [40mm] Max [40mm] [124mm] 4-5/8” [118mm] QUADRAT 2030 SD 1.6 E Delivers liquid soap 12V Transformer 351316 1.6 gallon (6L) tank kit for an individual soap dispenser Concealed installation in hollow framed walls providing connection access below the sink. 3-1/2” 5-1/8” [90mm] [130mm] 5-5/8” 8-7/8” [144mm] [224mm] 76

MULTIFEED KITS Installation kit for more efficient maintenance of multiple soap dispensers. Saves time and money, can supply up to six soap dispensers from one large capacity 1.6 gallon (6L) tank. Ideal for high traffic applications with multiple hand washing stations in high traffic restroom environments. Enables productive refill of multiple soap dispensers through a single top fill unit above deck and an LED indicator that lets maintenance staff know when soap levels are low. Suitable for any foam or liquid soap of the recommended viscosity. For options see page 50. Features: Advantages: • Allows multiple soap dispensers installation (up to six (6) • Drastically reduces soap consumption dispensers) with a single 1.6 US gallon (6L) tank • Cross contamination protection - no physical contact • Stainless Steel tank support or lockable underbasin cabinet • Maximized savings - can be used with any non- Options: proprietary soap • Anti-theft top filling brass mechanism for easy refill from • Easy installation the counter top • Fast and simple refill with optional LED indication of • Soap level indicator soap level • Below deck filling mechanism • Highly durable - with optional vandal-resistant top-filling mechanism • NEW: Plywood HPL (High Pressure Laminate) lockable cabinet with level indicator window. White panel and oak style frame for 1.6 Gallon (6L) soap tank with option to house the 33.8 FL OZ (1L) soap bottle as necessary. Hides unsightly pipes and connectors from the view of users. 77 SOAP DISPENSERS

PRODUCT MODEL FEATURES CODE NUMBER DRAWING Recommended hole size Min Ø 32.5mm [1- 1/4”] Max Ø 35.2mm [1- 3/8”] 2” 1/8” [51mm] [3mm] Top-Filling Multifeed Kit with 31-1/2” Soap Level Indicator [800mm] Vandal-resistant chrome-plated 07220152 top-filling brass mechanism. LED soap level indicator. 5-1/8” Power splitter for connection to [129mm] transformer powered MF 10-3/4” soap dispenser. [274mm] Stainless steel tank support 3-1/2” [90mm] 5- 5/8” 8- 7/8” [144mm] [224mm] 1-3/4” 1/8” [Ø45mm] [4mm] Top-Filling Multifeed Kit with 2” Soap Level Indicator [51mm] Vandal-resistant chrome-plated 31-1/2” top-filling brass mechanism. [800mm] LED soap level indicator. Power splitter for connection to 07220152CB transformer powered MF soap dispenser. 15-3/4” Lockable. [400mm] With lockable cabinet. 78

PRODUCT MODEL FEATURES CODE NUMBER DRAWING [2”] [1-3/4”] 51mm Ø 45mm [1/8”] Recommended hole size 4mm Min Ø 32.5mm [1- 1/4”] Max Ø 35.2mm [1- 3/8”] Top-Filling Multifeed Kit [31-1/2”] 800mm Vandal-resistant chrome- plated top-filling brass 07220090 mechanism. Available for transformer [5-1/8”] [10-3/4”] powered MF soap dispensers. 130mm 274mm Stainless steel tank support [3-1/2”] 90mm [5- 5/8”] [8- 7/8”] 144mm 224mm 1-3/4” 1/8” [Ø45mm] [4mm] 2” [51mm] Top-Filling Multifeed Kit 31-1/2” [800mm] Vandal-resistant chrome- 07220090CB plated top-filling brass mechanism. Available for transformer powered MF soap dispensers. With lockable cabinet. 15-3/4” [400mm] Below Deck Multifeed Kit 07220096 11-5/8” 2-3/4” 5-1/8” [295mm] [Ø 69mm] [130mm] For multiple soap dispensers 10-3/4” installation without [274mm] 8-7/8” connecting a top-filling [224mm] mechanism through the deck. 3-1/2” Available for transformer [90mm] powered MF soap dispensers. Top-fill unit not included in 5-5/8” this model. [144mm] Stainless steel tank support Below Deck Multifeed Kit 15-3/4” [400mm] For multiple soap dispensers installation without 07220096CB connecting a top-filling mechanism through the deck. 9-3/4” Available for transformer [247mm] powered MF soap dispensers. Top-fill unit not included in this model. With lockable cabinet. 11” [280mm] 79 SOAP DISPENSERS

CHROME PLATED FULL BRASS LOCKABLE COVER OPTIONAL: DOT ILLUMINATION MF TOUCH-FREE FOR SOAP LEVEL INDICATION SOAP DISPENSER PERISTALTIC PUMP Green: enough soap in tank Orange: low soap level (PART OF THE MF SOAP DISPENSER) Red: empty tank POWER SPLITTER CHROME-PLATED FULL BRASS SOAP AND WATER TOP-FILLING MECHANISM BREATHE PIPE 12V TRANSFORMER FLEXIBLE INTAKE PIPE 80 SOAP COVER FOR UP TO 6 PIPES 1.6 GALLON (6L) SOAP TANK WITH STAINLESS STEEL SUPPORT TOP-FILLING MULTIFEED KIT

HAND DRYERS & BEHIND THE MIRROR 81-88 81 HAND DRYERS & BEHIND THE MIRROR

EVER HD 83 TUBULAR HD 84 SWAR 85 SWA HI-SPEED 86 SOAP WATER AIR MODULE REVOLUTION BEHIND MIRROR 87 BEHIND MIRROR 88 BTM PAPER HOLDER 88 SOAP DISPENSER FAUCET 82

EVER HD Electronic deck mounted hand dryer 0perated by IR sensor. Touch free electronic hand dryer for deck mounted installations. Powered by 110V-120VAC. Sensor settings can be customized by remote control. Advantages: ∙ Easy mounting back plate ∙ Installed above basin preventing hand wash drips to floors and counters ∙ HEPA filter for added hygienic properties ∙ Full brass body or stainless steel 316 material ∙ Variety of colors and special finishes available ∙ Matching touch free faucet and soap dispenser ∙ Highly durable - Designed for heavy traffic locations ∙ Air flow intensity adjustable by external button ∙ Adjustability with remote control: security time, detection range, delay out ∙ On/Off function to perform cleaning PICTURE PRODUCT NAME POWER CODE NUMBER DRAWING Ø1-5/8” [281-61/m2m” ] [42mm] Ø[312-m1/m4”] 7/8” 8-1/8” [23mm] [205mm] [1475-23/m4m”] Ø[620-m3/m8”] [00---14-05/m8m”] [14-53m/4m”] EVER HD 110V-120VAC 230510 12-3/8” [315mm] 7-7/8” 7-1/4” [200mm] [185mm] Airflow intensity adjustment button Installation PRODUCT AT A GLANCE Operating Voltage Drying Time Deck mounted Motor Thermal Protection 110V-120/220V-240VAC, 50/60 HZ, 0.84-1.0KW Heater Thermal Protection 20 seconds Standby Power Auto resetting thermostat turns unit off, 120V at 135OC (2570F), 240V at 95OC (2030F) Timing Protection Auto resetting thermostat turns unit off at 85OC (1850F). Thermal fuse cuts unit at 1420V (2880F) Sensing Range 0.3-0.4W Drip Proof 60 seconds auto shut off 170 mm ± 20 mm, adjustable OPTION IP21 Remote control OPTIONS CODE 07100014 83 HAND DRYERS & BEHIND THE MIRROR

TUBULAR HD Electronic wall mounted hand dryer 0perated by IR sensor. Touch free electronic hand dryer for wall mounted installations. Powered by 110V-120VAC. Sensor settings can be customized by remote control. Advantages: ∙ Easy mounting back plate ∙ Installed above basin preventing hand wash drips to floors and counters ∙ HEPA filter for added hygienic properties ∙ Full brass body or stainless steel 316 material ∙ Variety of colors and special finishes available ∙ Matching touch free faucet and soap dispenser ∙ Highly durable - Designed for heavy traffic locations ∙ Air flow intensity adjustable by external button ∙ Adjustability with remote control: security time, detection range, delay out ∙ On/Off function to perform cleaning PICTURE PRODUCT NAME POWER CODE NUMBER DRAWING Installation TUBULAR HD Ø2-3/8” Ø1-1/8” 8-5/8” Operating Voltage [60mm] [28mm] [220mm] Drying Time Concealed installation Motor Thermal Protection with open wall condition 350030 Max 9-7/8” Ø1-3/4” Heater Thermal Protection with full rear access such 350040 [Max 250mm] [45mm] Standby Power as a service chase. Timing Protection 110V-120VAC Sensing Range TUBULAR HD AISI316 Drip Proof 12-3/8” OPTION Concealed installation [315mm] Remote control with open wall condition with full rear access such 7-7/8” 7-1/4” as a service chase. [200mm] [185mm] 3-7/8” 3-1/8” 2-3/4” Max 1-1/2” Ø1-3/4” [100mm] [80mm] [70mm] [Max 38mm] [45mm] TUBULAR DP HD 3-7/8” Ø2-3/8” 8-5/8” [100mm] [60mm] [220mm] Concealed installation in hollow framed walls 350020 3-1/8” providing connection [80mm] access below the sink. Max 9-7/8” [Max 250mm] 110V-120VAC TUBULAR DP HD AISI316 350010 Concealed installation 7-7/8” 7-1/4” in hollow framed walls [200mm] [185mm] providing connection Airflow intensity adjustment button access below the sink. PRODUCT AT A GLANCE Wall mounted 110V-120/220V-240VAC, 50/60 HZ, 1.3-1.6KW 20 seconds Auto resetting thermostat turns unit off, 120V at 135OC (2570F), 240V at 95OC (2030F) Auto resetting thermostat turns unit off at 85OC (1850F). Thermal fuse cuts unit at 1420V (2880F) 0.3-0.4W 60 seconds auto shut off 170 mm ± 20 mm, adjustable IP21 OPTIONS CODE 07100014 84

SWAR Complete sanitary cabinet with a lockable mirror. Includes high speed hand dryer, mixing valve, touch free faucet, touch free soap dispenser and LED pictograms for intuitive user guidance and decoration. Delivered with remote controls to adjust soap dosage, select light color or sequence and customize the faucet settings. • Eliminates messy, slippery floors and hand drying queues • Reduces the amount of labor for commercial facilities maintenance 31-1/2” 9-3/8” [800mm] [238mm] 35-3/8” [900mm] 9-3/8” 9-7/8” 5-7/8” 9-1/8” 7-1/2” 7-7/8” 3-1/8” 8-1/2” 9-7/8” 5-7/8” [239mm] [250mm] [151mm] [233mm] [190mm] [200mm] [80mm] [216mm] [250mm] [151mm] 31-1/2” 31-1/2” [800mm] 31-1/2” [800mm] [800mm] SWAR SWAR P SWAR PA PN 280460-US PN 280470-US PN 280462-US 12V Transformer 12V Transformer 12V Transformer 85 HAND DRYERS & BEHIND THE MIRROR

SWA HI-SPEED MODULE Complete system including high speed hand dryer, thermostatic mixing valve, touch free faucet, liquid soap dispenser and optional lamp soap level indicator. • Ready to be integrated behind the mirror for a clear, minimalistic design • Eliminates messy, slippery floors and hand drying queues • Reduces the amount of labor for commercial facilities maintenance 2 1 • Easy installation with a stainless steel frame to be fixed to the wall • Ideal touch free soap-water-air cycle • Helps preventing cross contamination • Reduces water and soap consumption • To be used with non-proprietary soap • Drying time: less than 15 seconds 5 3 4 Complete system including high speed hand dryer (1), thermostatic mixing valve (2), touch free faucet (3) liquid soap dispenser (4) and optional lamp soap level indicator (5) 3/8” 22-7/8” 1/4” [10mm] [580mm] [5mm] 16-7/8” 6-1/2” [430mm] [165mm] 7-1/2” [192mm] 1” Ø1-1/8” 11-3/4” 2” [26mm] [Ø13mm] TYP [300mm] [50mm] 18” [456mm] 23-5/8” [600mm] PN 280410-US 12V Transformer 23 1 1 Modular system including touch free faucet (2) and liquid 5 23 53 soap dispenser (3) Modular system including high Modular system including high speed hand dryer (1) and liquid PN 280410-US speed hand dryer (1), touch soap dispenser (3) and optional 12V Transformer free faucet (2) and liquid soap lamp soap level indicator (5) dispenser (3) and optional lamp soap level indicator (5) PN 280410-US 12V Transformer PN 280410-US 12V Transformer 86

BTM SOAP DISPENSER Touch free electronic soap dispenser for integration behind the mirror • Drastically reduces soap consumption • Accurate soap dosage, adjustable by remote control • To be used with non-proprietary soap for maximum savings • No physical contact. Helps to protect users against cross • Easy to install and refill contamination • Matching IR operated faucet • Peristaltic pump. The soap is driven inside the soap tube without contact with the pump, preventing contamination and back flow BTM SOAP DISPENSER VERSIONS PICTURE PRODUCT NAME MODEL POWER SUPPLY CODE DRAWING FEATURES NUMBER 3/4” 3-7/8” [20mm] [100mm] BEHIND MIRROR SD B Battery box for 280210 six (6) D batteries Delivers 10-1/4” Ø3-1/2” 12-5/8” liquid soap [260mm] [90mm] [320mm] BEHIND MIRROR SD E 12V Transformer 280200 1-1/8” [30mm] Ø3/4” 3-7/8” [20mm] 1-3/4” [100mm] [45mm] 5-1/2” 4-3/4” [140mm] [120mm] 3/4” 3-7/8” [20mm] [100mm] BTM FOAM E Delivers 12V Transformer 280250 foam soap 10-1/4” Ø3-1/2” 12-5/8” [260mm] [90mm] [320mm] 1-1/8” 5-1/2” 1-3/4” 3/4” [30mm] [140mm] [45mm] [20mm] 4-3/4” [120mm] BTM MF SOAP DISPENSER VERSIONS PRODUCT NAME MODEL FEATURES POWER SUPPLY CODE NUMBER DRAWING MF BEHIND MIRROR SD Soap dispenser to 12V Transformer 07292223 be used with Stern’s Multifeed kits for multiple refill. Delivers liquid soap. 2” [50mm] 2-1/8” [55mm] Soap foam dispenser Ø3/4” 1-3/4” 1-3/4” to be used with Stern’s [20mm] [45mm] [45mm] Multifeed kits for MF BEHIND MIRROR multiple refill. 12V Transformer 07292270 3-1/2” 3/8” 4-3/4” FOAM Delivers foam soap [90mm] [10mm] [120mm] 5-1/2” 4-1/2” [140mm] [114mm] MF BEHIND MIRROR SD MF BEHIND MIRROR FOAM Ø2-3/4” [69mm] MULTIFEED KIT This version allows - 07220096 11-5/8” multiple soap [295mm] dispenser refill (up to 10-3/4” 6 dispensers) with a [274mm] single 1.6 US Gallons (6 liters) tank. See pages 77-80 8-7/8” [224mm] 87 HAND DRYERS & BEHIND THE MIRROR