WILO Catalog General Overview

51 Amusement park The task: Water rides with inclines and declines require a continuous flow of water to generate a “stream” on which the boats can glide as they are pulled up and dropped down. The solution: Wilo recirculation pumps to pump large volumes of water to low heights.

52 Special applications Product range Submersible pumps Submersible drainage pumps Pedestal pumps Series Wilo-Drain TMT Wilo-Drain VC Field of application Wilo-EMU 8\" series Wilo-Drain TMC Duty chart Wilo-EMU 10\"…24\" series Special applications, dewatering, Professional irrigation/agriculture, industrial process special applications, dewatering, Design Water distribution/boosting, clean industrial process Application water treatment, raw water intake, desalination, professional irrigation/ :LOR'UDLQ9& Volume flow Q max. agriculture  Delivery head H max.  Technical data +P +P  Equipment/function +P   :LOR(08 :LOR'UDLQ        4PåK Special features  Å ÅÅÅ  70770&        Vertical drainage pumps Information  ÅÅ     4PåK Pumping of wastewater and conden-    4OV  sate up to 95 °C from pump sumps and  from cellars at risk of flooding    14 m3/h   20 m ƒƒ Mains connection 1~230 V, 50 Hz or  3~400 V, 50 Hz Submersible pump with sectional Submersible drainage pumps ƒƒ Protection class IP 54 construction ƒƒ Fluid temperature +5 °C to +95 °C ƒƒ Free ball passage 5 or 7 mm, Supply of potable and other water from Pumping of condensate, hot water and boreholes and rainwater storage tanks; aggressive media in industrial applica- depending on type process water supply; municipal and tions ƒƒ Pressure port Rp 1¼ or Rp 1½ industrial water supply; sprinkling and irrigation; pressure boosting; lowering depending on type the ground water level; utilisation of geothermal energy and in offshore ƒƒ Attached float switch applications ƒƒ For fluids up to 95 °C 2,400 m3/h 22 m3/h ƒƒ Long service life 560 m 13 m ƒƒ Easy operation thanks to attached ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Max. fluid temperature: 20 ... 30 °C ƒƒ Immersed operating mode: S1 float switch ƒƒ Minimum flow rate at motor: 0.1 ... ƒƒ Non-immersed operating mode: S3 ƒƒ Long standstill times possible ƒƒ Integrated motor protection with 0.5 m/s 25 % ƒƒ Max. sand content: 35 g/m³ ƒƒ Protection class IP 68 thermal relay ƒƒ Up to 10 starts per hour ƒƒ Max. immersion depth 5 m ƒƒ Max. immersion depth: 100 or ƒƒ Fluid temperature 95 °C, 65 °C Online catalogue: productfinder.wilo.com Building services catalogue: 300/350 m non-immersed Drainage and sewage ƒƒ Cable length 10 m Water Management catalogue: ƒƒ Multistage submersible pump ƒƒ Free ball passage 10 mm Drainage and sewage – Wastewater ƒƒ Radial or semi-axial impellers ƒƒ Pressure port Rp 1¼ or Rp 1½ transport and dewatering ƒƒ Hydraulics and motor freely configur- depending on type able according to power requirements ƒƒ Pump housing and impeller made of ƒƒ Integrated non-return valve grey cast iron, bronze or stainless (depending on type) steel, depending on version ƒƒ NEMA coupling or standardised con- ƒƒ For fluids up to 95 °C nection ƒƒ Versions in bronze or in stainless ƒƒ Three-phase motor for direct or star- steel casting for aggressive fluids delta start ƒƒ Sealed cable inlet ƒƒ Sturdy waterworks version in cast Online catalogue: productfinder.wilo.com iron or zinc-free bronze Building services catalogue: Drainage and sewage ƒƒ Pressure shroud in corrosion-resist- Water Management catalogue: ant and hygienic stainless steel ver- Drainage and sewage – Wastewater sion with rubber bearing to minimise transport and dewatering noise and vibrations ƒƒ Maintenance-friendly motors ƒƒ Optionally with Ceram CT coating for increasing the efficiency Online catalogue: productfinder.wilo.com Water Management catalogue: Water supply – Raw water intake General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

53 Product range Submersible sewage pumps+P Submersible sewage pump Submersible sewage pumps Series +P Field of application Wilo-Drain TP 80 +PWilo-Rexa PROWilo-EMU FA 08 … to FA 15 … Duty chart Wilo-Drain TP 100 Wilo-EMU FA 20 … to FA 25 … Special applications, wastewater Wilo-EMU FA 30 … to FA 60 … Design Special applications, wastewater collection and transport, wastewater Special applications, wastewater Application collection and transport, dewatering, treatment, dewatering collection and transport, wastew­ ater industrial process treatment, dewatering, industrial :LOR5H[D352 process :LOR'UDLQ  999 7373  :LOR(08   )$)$                  4PåK          4PåK     4OV Submersible sewage pump for industrial  applications Submersible sewage pump Pumping heavily contaminated fluids, Submersible sewage pump with for environmental and water treatment Pumping of drainage water and sewage, glanded motors or self-cooling motors technology and industrial and process sewage containing faeces, and sludge engineering up to max. 8% dry matter from sumps Pumping sewage with solid content and tanks, and also for house and site in wastewater treatment plants and drainage pumping stations, local drainage, water control and process water extraction; construction applications and industrial applications Volume flow Q max. 180 m3/h 95  m3/h 7,950 m3/h Delivery head H max. 21 m 29 m 87 m Technical data ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 1~230 V, 50 Hz or ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 Equipment/function ƒƒ Non-immersed operating mode: S1 3~400 V, 50 Hz ƒƒ Non-immersed operating mode with Special features ƒƒ Protection class: IP 68 ƒƒ Immersed operating mode: S1 ƒƒ Insulation class: F ƒƒ Non-immersed operating mode: S2- self-cooling motor: S1 Information ƒƒ Thermal winding monitoring ƒƒ Protection class: IP 68 ƒƒ Sealing chamber control 30 min, S3 25 % ƒƒ Max. fluid temperature: 40 °C; ƒƒ Max. fluid temperature: 40 °C ƒƒ Protection class: IP 68 ƒƒ Free ball passage: 80 or 100 mm ƒƒ Insulation class: F higher temperatures on request ƒƒ Max. immersion depth: 20 m ƒƒ Fluid temperature: 3-40 °C, ƒƒ Sealing with rotary shaft seal and ƒƒ Thermal motor monitoring max. 60 °C for 3 min mechanical seal, two mechanical ƒƒ Sealing chamber monitoring ƒƒ Free passage: 50/65/80 mm seals or one block seal cartridge, ƒƒ ATEX approval ƒƒ Max. immersion depth: 20 m depending on motor ƒƒ Sheath current cooling ƒƒ Cable length: 10 m ƒƒ Free ball passage of 45 to 170 mm ƒƒ Permanently lubricated roller ƒƒ Self-cooling motor for the use in wet ƒƒ Winding temperature monitoring bearings well or dry well installations with bimetal sensor ƒƒ Max. immersion depth: 20 m ƒƒ Heavy-duty version made of cast ƒƒ Corrosion-resistant stainless steel ƒƒ Leakage detection for the motor iron motor housing made of 1.4404 compartment ƒƒ Self-cooling motors with 1- or 2-chamber system ƒƒ Patented non-clogging hydraulics ƒƒ Sturdy version in cast iron ƒƒ Simple installation via suspension ƒƒ Longitudinal watertight cable inlet ƒƒ Secure Vortex hydraulics with large unit or pump base ƒƒ Low weight free ball passage for a non-clogging ƒƒ Self-cooling motors for the use in Online catalogue: productfinder.wilo.com operation wet well and dry well installations Building services catalogue: ƒƒ Oil separation chamber with optional Drainage and sewage external monitoring ƒƒ Process security thanks to extensive Water Management catalogue: ƒƒ Longitudinal watertight cable inlet monitoring devices Drainage and sewage – Wastewater ƒƒ Also available with IE3 motor tech- transport and dewatering nology ƒƒ Special versions for abrasive and cor- Online catalogue: productfinder.wilo.com rosive fluids Building services catalogue: Drainage and sewage ƒƒ Low vibrations and long standstill Water Management catalogue: times thanks to high-quality compo- Drainage and sewage – Wastewater nents transport and dewatering Online catalogue: productfinder.wilo.com Water Management catalogue: Drainage and sewage – Wastewater treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

54 Special applications Product range Submersible sewage pumps Submersible sewage pumps Recirculation pump Series Wilo-EMU FA…RF Wilo-EMU KPR … Wilo-EMU RZP 20 to RZP 80-2 Field of application Special applications, wastewater Raw water intake, professional irriga- Special applications, wastewater Duty chart collection and transport, industrial tion/agriculture, special applications, treatment process wastewater treatment, dewatering Design +P :LOR(085=3 Application :LOR(08 +P :LOR(08.35  )$5) +P Volume flow Q max.   Delivery head H max.    Technical data       4OV    Equipment/function Axial submersible pump with glanded        4OV motor for use in pipe sumps      4OV Special features Pumping cooling or rainwater, cleaned  Submersible sewage pumps made of sewage and for irrigation and pumping Information cast stainless steel sludge Submersible mixers with housing unit, Pumping sewage with solid content in directly driven or with single-stage water treatment systems and industrial 9,500 m3/h planetary gear applications 8.4 m Pumping wastewater and sewage ƒƒ Mains connection: 3~400 V, 50 Hz with low delivery heads and large 70 m3/h ƒƒ Immersed operating mode: S1 volume flows, e.g. between equalis- 30 m ƒƒ Protection class: IP 68 ing, nitrification and denitrification ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Max. fluid temperature: 40 °C; tanks; pumping process, raw, clean and ƒƒ Immersed operating mode: S1 cooling water e.g. in paint finishing ƒƒ Protection class: IP 68 higher temperatures on request systems or for clean water treatment; ƒƒ Max. fluid temperature: 40 °C; ƒƒ Sealing with two mechanical seals or flow generation in water channels, e.g. amusement parks higher temperatures on request one block seal cartridge, depending 6,800 m3/h ƒƒ Sealing with two mechanical seals or on motor 1.1 m ƒƒ Free ball passage of 85 to 130 mm ƒƒ Mains connection: 3~400 V, 50 Hz one block seal cartridge, depending ƒƒ Short common pump/motor shaft ƒƒ Immersed operating mode: S1 on motor ƒƒ Permanently lubricated roller ƒƒ Protection class: IP 68 ƒƒ Free ball passage of 35 to 45 mm bearings ƒƒ Max. fluid temperature: 40 °C ƒƒ Permanently lubricated roller ƒƒ Max. immersion depth: 20 m ƒƒ Units directly driven or with bearings ƒƒ Heavy-duty version made of cast ƒƒ Max. immersion depth: 20 m iron single-stage planetary gear ƒƒ Heavy-duty version made of cast ƒƒ Mechanical seal with SiC/SiC pairing stainless steel (1.4581) ƒƒ Permanently lubricated roller ƒƒ Simple installation via suspension unit or pump base bearings ƒƒ Max. immersion depth: 20 m ƒƒ Stationary installation directly on the flow pipe ƒƒ Flexible installation via lowering device ƒƒ Vertical or in-line installation possible ƒƒ Sturdy version completely in stain- ƒƒ Installation directly in the pressure ƒƒ Vertical or in-line installation pos- less steel casting 1.4581 for the use pipe sible in corrosive fluids ƒƒ Angle of propeller blades adjustable ƒƒ Self-cleaning propeller to avoid ƒƒ Process security thanks to extensive ƒƒ Process security thanks to extensive clogging monitoring devices monitoring devices ƒƒ Propeller in steel or PUR ƒƒ Longitudinal watertight cable inlet ƒƒ Low vibrations and long standstill ƒƒ Low vibrations and long standstill Online catalogue: productfinder.wilo.com times thanks to high-quality compo- Water Management catalogue: times thanks to high-quality compo- nents Drainage and sewage – Wastewater nents treatment Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Water Management catalogue: Water Management catalogue: Drainage and sewage – Wastewater Drainage and sewage – Wastewater transport and dewatering (order- transport and dewatering (pumps specific production) – Wastewater available ex stock) treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

55 Product range Submersible mixer Submersible mixer Series extension Series Wilo-EMU TR 14 to TR 28 Wilo-EMU TR 22 to TR 40 Field of application Special applications, wastewater Special applications, wastewater Submersible mixer treatment treatment Wilo-EMU TR 50-2 to TR 120-1 Duty chart no illustration no illustration Wilo-EMU TRE 90-2 with IE3 motor Special applications, wastewater treatment no illustration Design Compact, directly driven submersible Directly driven submersible mixer Submersible mixer with single-stage Application mixer Turbulation of deposits and solids in planetary gear Turbulation of deposits and solids in rain spillway basin and pump sump; Use in activated sludge tanks and Volume flow Q max. rain spillway basin and pump sump; destruction of floating sludge layers; sludge tanks for flow generation, Delivery head H max. destruction of floating sludge layers; further applications in agriculture and suspension of solids, homogenisa- Technical data further applications in agriculture and water supply tion and prevention of floating sludge water supply layers; further applications in industry, agriculture and water supply Thrust: 45 - 330 N Thrust: 185 - 1100 N Thrust: 350 - 6620 N ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 40 °C ƒƒ Max. fluid temperature: 40 °C ƒƒ Max. fluid temperature: 40 °C ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Single-stage planetary gear ƒƒ Permanently lubricated roller ƒƒ Permanently lubricated roller ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Permanently lubricated roller bearings bearings ƒƒ Max. immersion depth: 20 m ƒƒ Max. immersion depth: 20 m bearings ƒƒ Max. immersion depth: 20 m Equipment/function ƒƒ Stationary installation on wall and ƒƒ Stationary installation on wall and ƒƒ Stationary installation on walls Special features floor floor ƒƒ Flexible installation via lowering Information ƒƒ Flexible installation through the use ƒƒ Flexible installation via lowering device of lowering device or special pipe device ƒƒ Can be swivelled horizontally when attachment ƒƒ Can be swivelled vertically and installed with a lowering device ƒƒ Can be swivelled vertically and horizontally when installed with a ƒƒ Installation with stand allows free horizontally when installed with a lowering device lowering device placement in basin ƒƒ Self-cleaning propeller with Helix ƒƒ Single-stage planetary gear ƒƒ Low power consumption hub to avoid clogging ƒƒ Low weight ƒƒ Planetary gear allows transmission of ƒƒ Self-cleaning propeller with Helix ƒƒ Propeller in cast iron, steel or PUR high torques to the propeller with an aerodynamic construction hub to avoid clogging Online catalogue: productfinder.wilo.com ƒƒ Propeller in steel or PUR Water Management catalogue: ƒƒ Exchangeable planetary stage for Drainage and sewage – Wastewater adaptation of the propeller speed Online catalogue: productfinder.wilo.com treatment Water Management catalogue: ƒƒ Self-cleaning propeller with back- Drainage and sewage – Wastewater ward-bent blades to avoid clogging treatment ƒƒ Also with IE3 motor technology (on the basis of IEC 60034-30) ƒƒ Propeller in steel, PUR or PUR/GFK Online catalogue: productfinder.wilo.com Water Management catalogue: Drainage and sewage – Wastewater treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

56 Special applications Series extension Product range Submersible mixer Submersible mixer Series Wilo-Sevio MIX DM 50-2 Wilo-EMU TR 212 to TR 226 Field of application Wilo-EMU TR 316 to TR 326 Special applications, industrial process Duty chart Wilo-EMU TRE with IE3 motor no illustration Special applications, wastewater treat- ment no illustration Design Slow-running submersible mixer with Submersible mixer with single-stage Application two-stage planetary gear reduction planetary gear Volume flow Q max. Energetically optimised mixing and cir- Pumping of drilling mud on on-shore Delivery head H max. culation of activated sludge; generation and off-shore installations Technical data of flow rates in circulation channels; other applications in industry Thrust: 1010 N Equipment/function Thrust: 390 - 4950 N Special features ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz Information ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 40 °C ƒƒ Max. fluid temperature: 90 °C ƒƒ Two-stage planetary gear with ƒƒ Single-stage planetary gear ƒƒ Mechanical seal with SiC/SiC pairing exchangeable second planetary gear ƒƒ Permanently lubricated roller speed ƒƒ Mechanical seal with SiC/SiC pairing bearings ƒƒ Permanently lubricated roller ƒƒ Max. immersion depth: 20 m bearings ƒƒ Flexible installation via lowering ƒƒ Max. immersion depth: 20 m device ƒƒ Installation with stand allows free ƒƒ Can be swivelled horizontally when placement in basin installed with a lowering device ƒƒ Flexible installation ƒƒ Single-stage planetary gear ƒƒ Two-stage planetary gear with ƒƒ Sturdy construction for fluid tem- exchangeable second planetary gear peratures of up to 90 °C speed ƒƒ Exchangeable planetary stage for ƒƒ Planetary gear allows transmission adaptation of the propeller speed of high torques to the propeller with ƒƒ Stainless steel propeller with high aerodynamic construction wear resistance ƒƒ Exchangeable planetary stage for ƒƒ Ex approval as standard adaptation of the propeller speed Documentation on request ƒƒ Self-cleaning propeller with back- ward-bent blades to avoid clogging ƒƒ Also with IE3 motor technology (on the basis of IEC 60034-30) Online catalogue: productfinder.wilo.com Water Management catalogue: Drainage and sewage – Wastewater treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

57 Wilo-EMU TRE 326-3 General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

58 Subject “With Wilo pumps, it’s clear that there’s no longer any need to worry about wastewater.”

Drainage and sewage 59 Drainage and sewage Pumps and systems for wastewater collection and transport, wastewater treatment, dewatering and flood control. Wilo-Rexa PRO

60 Drainage and sewage Disposing of wastewater reliably Wilo systems for sewage disposal. Wastewater and sewage must be disposed powerful and highly economical systems. It of reliably in order to ensure compliance with shows in many little details. For instance, our quality, hygiene and environmental standards pumps master even big challenges such as and to prevent obnoxious odours. Anywhere the rising solid content in sewage without where there is no gradient allowing it to flow problems, and demonstrate resource-efficient easily into the sewer system, our pumps and performance and top quality for the long term. lifting units offer you an all-round, clean and efficient solution. Making one thing very clear: you no longer have any need to worry about wastewater and We have worked closely with our customers sewage from now on. for decades to continuously optimise our Pumping station in Tuzla, Turkey. Reliable sewage disposal. The task: The municipal sewage treat- ment facility purifies sewage produced by 4.5 million residents. It is collected via two separate subterranean sewer systems and must then be lifted more than 8 m to supply it into the treat- ment plant. Two pump stations are in continuous use for this purpose. The solution: Wilo supplied reli- able submersible sewage pumps of the type Wilo-EMU FA 50 with a special Ceram coating.

61 Wastewater treatment plant in Atlanta, USA. For minimum life cycle costs. The task: To increase efficiency in the fields of mixed media, pu- rification and food filtration. The solution: Wilo supplied 134 highly efficient, low-wearing submersible mixers which run perfectly and save a tremendous amount of power.

62 Drainage and sewage Product range Self-priming drainage pumps Submersible drainage pumps Pedestal pumps Series Wilo-Drain TMT Wilo-Drain VC Field of application Wilo-Drain LP Wilo-Drain TMC Duty chart Wilo-Drain LPC Special applications, dewatering, Professional irrigation/agriculture, industrial process special applications, dewatering, Design Water distribution/boosting, profes- industrial process Application sional irrigation/agriculture, wastewater collection and transport, dewatering :LOR'UDLQ9& Volume flow Q max. (including flood control)  Delivery head H max.  Technical data H/m +P 30 +P  Equipment/function 25 Wilo-Drain LP / LPC :LOR'UDLQ  20 10 20 30 40 50 Q/m³/h  70770&        4PåK 15  10     4PåK Vertical drainage pumps 5  Pumping of wastewater and conden- 00  sate up to 95 °C from pump sumps and  from cellars at risk of flooding   14 m3/h 20 m  ƒƒ Mains connection 1~230 V, 50 Hz or Self-priming drainage pumps for dry Submersible drainage pumps 3~400 V, 50 Hz well installation ƒƒ Protection class IP 54 ƒƒ Fluid temperature +5 °C to +95 °C For pumping wastewater with small Pumping of condensate, hot water and ƒƒ Free ball passage 5 or 7 mm, amounts of solid matter for aggressive media in industrial applica- ƒƒ Excavation pits and ponds tions depending on type ƒƒ Sprinkling/spraying of gardens and ƒƒ Pressure port Rp 1¼ or Rp 1½ 22 m3/h green areas 13 m depending on type ƒƒ Drainage of seepage water ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Mobile drainage ƒƒ Immersed operating mode: S1 ƒƒ Attached float switch 60 m3/h ƒƒ Non-immersed operating mode: S3 29 m 25 % ƒƒ Protection class IP 68 ƒƒ Mains connection 1~230 V, 50 Hz, ƒƒ Max. immersion depth 5 m 3~400 V, 50 Hz ƒƒ Fluid temperature 95 °C, 65 °C ƒƒ Fluid temperature 3 °C to 35 °C non-immersed ƒƒ Free ball passage 5 to 12 mm, ƒƒ Cable length 10 m ƒƒ Free ball passage 10 mm depending on type ƒƒ Pressure port Rp 1¼ or Rp 1½ ƒƒ Connection Rp 1½ to G3 depending on type ƒƒ Portable self-priming centrifugal pump ƒƒ Pump housing and impeller made of grey cast iron, bronze or stainless steel, depending on version Special features ƒƒ Long service life ƒƒ For fluids up to 95 °C ƒƒ For fluids up to 95 °C Information ƒƒ Sturdy construction ƒƒ Versions in bronze or in stainless ƒƒ Long service life ƒƒ Easy operation ƒƒ Easy operation thanks to attached ƒƒ Flexible use steel casting for aggressive fluids ƒƒ Sealed cable inlet float switch Online catalogue: productfinder.wilo.com ƒƒ Long standstill times possible Water Management catalogue: Online catalogue: productfinder.wilo.com ƒƒ Integrated motor protection with Drainage and sewage – Wastewater Building services catalogue: transport and dewatering (pumps Drainage and sewage thermal relay available ex stock) Water Management catalogue: Drainage and sewage – Wastewater Online catalogue: productfinder.wilo.com transport and dewatering Building services catalogue: Drainage and sewage Water Management catalogue: Drainage and sewage – Wastewater transport and dewatering General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

63 Product range Submersible drainage pumps Submersible drainage pumps Series modification Series Wilo-Drain TM/TMW/TMR 32 Submersible drainage pumps Field of application Wilo-Drain TS/TSW 32 Wilo-Drain TS 40 Wilo-EMU KS Duty chart Wastewater collection and transport, Wilo-Drain TS 50 dewatering, flood control Wilo-Drain TS 65 Dewatering, industrial process Design Wastewater collection and transport, Application dewatering, industrial process Volume flow Q max. H/m Wilo-Drain TS / TSW +P Delivery head H max. 10 TM / TMR / TMW +P Technical data 8 :LOR'UDLQ :LOR(08.6 6 76  Equipment/function 4  2 Special features 00 2 4 6 8 10 12 Q/m³/h   Information Basement drainage pump   For pumping clear or slightly muddy   water from tanks, sumps or pits. For help with overflows and flooding and  for draining basement stairways and basement areas from domestic waste-      4PåK     4PåK water and for pumping water from small   fountains, waterworks or streams 16 m3/h Submersible drainage pumps Submersible drainage pumps in rugged 12 m design for use on building sites ƒƒ Mains connection 1~230 V, 50 Hz ƒƒ Protection class IP 68 For pumping wastewater in house/site For drainage of excavation pits, cellar ƒƒ Max. immersion depth TM/TMW/TMR drainage, in environmental and water areas, sumps and basins. Ideally suited treatment technology and industrial for use in fountains = 3 m, TS/TSW = 10 m and process engineering ƒƒ Fluid temperature 3 °C to 35 °C, 53 m3/h 340 m3/h for short periods up to 3 min. 25 m 71 m max. 90 °C ƒƒ Mains connection 1~230 V, 50 Hz or ƒƒ Mains connection 1~230 V, 50 Hz or ƒƒ Cable length 3 to 10 m, depending on type 3~400 V, 50 Hz 3~400 V, 50 Hz ƒƒ Free ball passage 10 mm ƒƒ Immersed operating mode: S1 ƒƒ Operating mode S1 ƒƒ Pressure port Rp 1¼, hose connec- ƒƒ Non-immersed operating mode: S3 ƒƒ Max. fluid temperature 40 °C tion 35 mm (TM 32/...), 32 mm (R1) ƒƒ Protection class IP 68 for TS/TSW 25 % ƒƒ Sealed by double mechanical seal ƒƒ Ready-to-plug ƒƒ Protection class IP 68 ƒƒ Maintenance-free roller bearing ƒƒ Motor monitoring via temperature ƒƒ Immersion depth 5 to 10 m ƒƒ Sheath current cooling ƒƒ Fluid temperature 3 °C to 35 °C ƒƒ Bidirectional mechanical seal ƒƒ Hose connection ƒƒ Free ball passage 10 mm ƒƒ Heavy-duty motors (oil-filled and ƒƒ Turbulator (TMW, TSW) ƒƒ Pressure port Rp 1½, Rp 2 or Rp 2½ ƒƒ Float switch (depending on type) dry) ensure permanent operation depending on type even with non-immersed motor ƒƒ TMW, TSW with turbulator for ƒƒ Corrosion-resistant components constantly clean pump sump ƒƒ Ready-to-plug versions also with float switch ƒƒ Long service life ƒƒ No generation of fluid-related ƒƒ Sturdy construction odours ƒƒ Thermal motor monitoring ƒƒ Slurping operation possible ƒƒ Explosion protection for TS 50 and ƒƒ Suitable for permanent operation ƒƒ Easy installation ƒƒ High operational reliability TS 65 (S1) ƒƒ Easy operation ƒƒ Connection cable 10 m ƒƒ Ready-to-plug Online catalogue: productfinder.wilo.com ƒƒ Connection cable detachable Building services catalogue: ƒƒ Integrated non-return valve for Online catalogue: productfinder.wilo.com Drainage and sewage Building services catalogue: TS 40 Drainage and sewage ƒƒ Hose connection for TS 40 Water Management catalogue: ƒƒ Low weight Drainage and sewage – Wastewater ƒƒ Large performance range transport and dewatering (pumps ƒƒ Oil separation chamber available ex stock) ƒƒ Easy operation thanks to attached float switch and plug (A version) Online catalogue: productfinder.wilo.com Building services catalogue: Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

64 Drainage and sewage NEW Product range Submersible sewage pumps with Submersible sewage pumps Submersible sewage pumps Series macerator Wilo-Drain TC 40 Wilo-Drain STS 40 Field of application Wilo-RexaCut FIT Duty chart +PWilo-RexaCut PRO Wastewater collection and transport, Wastewater collection and transport, Wilo-Drain MTC dewatering, flood control dewatering, flood control Design Wastewater collection and transport Application H/m Wilo-Drain TC 40 H/m Wilo-Drain STS 40 :LOR5H[D&XW 12 10 Volume flow Q max.  ),7352 10 8 Delivery head H max.  8 6 Technical data  6 4 4 2 Equipment/function  2 00 2 4 6 8 10 12 14 16 Q/m³/h       4PåK 00 2 4 6 8 10 12 14 Q/m³/h Special features Submersible sewage pumps Submersible sewage pumps with Submersible sewage pump Information macerator Pumping heavily contaminated fluids Pumping sewage containing faeces Pumping heavily contaminated fluids for house/site drainage, sewage and municipal and industrial sewage, for house/site drainage, sewage disposal (pumping of sewage free of including fibrous matter, for pressure disposal (pumping of sewage free of faeces in acc. with DIN EN 12050-2), drainage, house and site drainage, faeces in acc. with DIN EN 12050-2) water management, and environmental, sewage and water management and and environmental and water treatment water treatment, industrial and process environmental and water treatment technology engineering applications technology 20 m3/h 17 m3/h 22 m3/h 10 m 55 m 10 m ƒƒ Mains connection: 1~230 V, 50 Hz or ƒƒ Mains connection: 1~230 V, 50 Hz or ƒƒ Mains connection: 1~230 V, 50 Hz ƒƒ Immersed operating mode: S1 3~400 V, 50 Hz 3~400 V, 50 Hz ƒƒ Non-immersed operating mode: S3 ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Non-immersed operating mode: S3 ƒƒ Protection class: IP 68 25 % ƒƒ Insulation class: F ƒƒ Protection class: IP 68 25 % ƒƒ Thermal winding monitoring ƒƒ Insulation class: B ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 3-40 °C ƒƒ Thermal winding monitoring ƒƒ Insulation class: B ƒƒ Max. fluid temperature: 3-40 °C ƒƒ Thermal winding monitoring ƒƒ Free ball passage: 35 mm ƒƒ Max. fluid temperature: 3-35 °C ƒƒ Max. immersion depth: 5 m ƒƒ Free ball passage: 40 mm ƒƒ Max. immersion depth: 5 m ƒƒ Internal or external macerator ƒƒ Ready-to-plug ƒƒ AC variant ready-to-plug ƒƒ Unimpeded flow to the impeller ƒƒ Including float switch ƒƒ A-model including float switch ƒƒ Maceration of substances being ƒƒ Thermal motor monitoring ƒƒ Thermal motor monitoring conveyed ƒƒ Heavy-duty hydraulic housing made ƒƒ Connection cable detachable ƒƒ Simple installation via suspension of cast iron ƒƒ Stainless steel glanded motor ƒƒ Attached float switch (A-model) unit or pump base ƒƒ Easy operation due to the attached ƒƒ Oil separation chamber with optional float switch enables easy operation ƒƒ Integrated pump base for easy external monitoring ƒƒ Integrated stainless steel pump base ƒƒ Low-weight version with stainless for easy installation installation ƒƒ Free ball passage: 40 mm steel motor ƒƒ Free ball passage: 40 mm ƒƒ No switchgear required for thermal ƒƒ Sturdy version in cast iron ƒƒ Sealing with two mechanical seals Online catalogue: productfinder.wilo.com fuse protection ƒƒ Longitudinal watertight cable inlet Building services catalogue: ƒƒ Integrated thermal motor protection Drainage and sewage Online catalogue: productfinder.wilo.com (1~/3~) and phase failure protec- Building services catalogue: tion (3~) Drainage and sewage Online catalogue: productfinder.wilo.com Building services catalogue: Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

65 Product range Submersible sewage pumps+P Submersible sewage pumps Submersible sewage pump Series +P Field of application Wilo-Drain TP 50 +PWilo-Drain TP 80Wilo-Rexa FIT Duty chart Wilo-Drain TP 65 Wilo-Drain TP 100 Wilo-Rexa PRO Wilo-Drain TP...-AM Design Wastewater collection and transport, Special applications, wastewater Special applications, wastewater Application dewatering collection and transport, dewatering, collection and transport, wastewater industrial process treatment, dewatering Volume flow Q max. :LOR'UDLQ Delivery head H max. 7373 :LOR'UDLQ73 :LOR5H[D),7352 Technical data  7373$0  999    Equipment/function       Special features          4PåK          4PåK   Submersible sewage pumps Submersible sewage pump for industrial         4PåK applications Pumping heavily contaminated fluids for Pumping heavily contaminated fluids, Submersible sewage pump house and site drainage, sewage (not for environmental and water treatment within the scope of DIN EN 12050-1) technology and industrial and process Pumping of drainage water and sewage, and water management, environmental engineering sewage containing faeces, and sludge and water treatment technology and up to max. 8 % dry matter from sumps industrial and process engineering 180 m3/h and tanks, and also for house and site 21 m drainage 60 m3/h ƒƒ Mains connection: 3~400 V, 50 Hz 21 m ƒƒ Immersed operating mode: S1 95  m3/h ƒƒ Mains connection: 1~230 V, 50 Hz or ƒƒ Non-immersed operating mode: S1 29 m ƒƒ Protection class: IP 68 ƒƒ Mains connection: 1~230 V, 50 Hz or 3~400 V, 50 Hz ƒƒ Insulation class: F ƒƒ Immersed operating mode: S1 ƒƒ Thermal winding monitoring 3~400 V, 50 Hz ƒƒ Non-immersed operating mode: ƒƒ Sealing chamber control ƒƒ Immersed operating mode: S1 ƒƒ Max. fluid temperature: 40 °C ƒƒ Non-immersed operating mode: S2-8 min, S3 25 % ƒƒ Free ball passage: 80 or 100 mm ƒƒ Protection class: IP 68 ƒƒ Max. immersion depth: 20 m --Rexa FIT: S2-15 min; S3 10 % ƒƒ Insulation class: F --Rexa PRO: S2-30 min, S3 25 % ƒƒ Thermal winding monitoring ƒƒ Thermal motor monitoring ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 35 °C ƒƒ Sealing chamber monitoring ƒƒ Insulation class: F ƒƒ Free ball passage: 44 mm ƒƒ ATEX approval ƒƒ Fluid temperature: 3-40 °C, ƒƒ Max. immersion depth: 10 m max. 60 °C for 3 min (not for “AM” version) ƒƒ Free passage: 50/65/80 mm ƒƒ AC variant with capacitor box ƒƒ Sheath current cooling ƒƒ Max. immersion depth: 20 m ƒƒ Thermal motor monitoring ƒƒ Model “AM” with float switch, ƒƒ Cable length: 10 m ƒƒ ATEX approval ƒƒ Winding temperature monitoring CEE-plug and transport frame with bimetal sensor (TP 65 3~ without floater) ƒƒ Oil separation chamber with optional external monitoring ƒƒ Stainless steel motor housing made ƒƒ Self-cooling motor for the use in wet ƒƒ Low-weight version with stainless of 1.4301 well and dry well installations steel motor or sturdy version in cast iron ƒƒ Easy operation thanks to attached ƒƒ Corrosion-resistant stainless steel float switch (A version) motor housing in 1.4404 ƒƒ Secure Vortex hydraulics with large free ball passage for a non-clogging ƒƒ Low weight ƒƒ Patented non-clogging hydraulics operation ƒƒ Longitudinal watertight cable inlet ƒƒ Low weight ƒƒ Also with IE3 motor technology (on the basis of IEC 60034-30) Information Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Building services catalogue: Building services catalogue: Building services catalogue: Drainage and sewage Drainage and sewage Drainage and sewage Water Management catalogue: Drainage and sewage – Wastewater transport and dewatering General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

66 Drainage and sewage Product range Submersible sewage pumps Submersible sewage pumps Submersible sewage pumps Series Wilo-EMU FA…RF Field of application Wilo-EMU FA 08 … to FA 15 … Wilo-EMU FA 08 … to FA 15 … Duty chart (standard pumps) Wilo-EMU FA 20 … to FA 25 … Special applications, wastewater Wilo-EMU FA 30 … to FA 60 … collection and transport, industrial Design Wastewater collection and transport, Special applications, wastewater process Application wastewater treatment, dewatering collection and transport, wastewa- Volume flow Q max. ter treatment, dewatering, industrial :LOR(08 Delivery head H max. :LOR(08 process  )$5) Technical data  )$69$   :LOR(08  Equipment/function  )$)$ Special features     Information          4OV           4OV+P +P Submersible sewage pumps made of Submersible sewage pumps +Pcast stainless steel Pumping sewage with solid content in Pumping sewage with solid content     4OV water treatment systems and industrial in wastewater treatment plants and  applications pumping stations, local drainage, water control and process water extraction; Submersible sewage pump with 70 m3/h construction applications and industrial glanded motors or self-cooling motors 30 m applications ƒƒ Mains connection: 3~400 V, 50 Hz 380 m3/h Pumping sewage with solid content ƒƒ Immersed operating mode: S1 51 m in wastewater treatment plants and ƒƒ Protection class: IP 68 ƒƒ Mains connection: 3~400 V, 50 Hz pumping stations, local drainage, water ƒƒ Max. fluid temperature: 40 °C; ƒƒ Immersed operating mode: S1 control and process water extraction; ƒƒ Non-immersed operating mode: S2- construction applications and industrial higher temperatures on request applications ƒƒ Sealing with two mechanical seals or 15 or S2-30 (depending on type) ƒƒ Thermal motor monitoring 7,950 m3/h one block seal cartridge, depending ƒƒ Protection class: IP 68 on motor ƒƒ Insulation class: F 87 m ƒƒ Free ball passage of 35 to 45 mm ƒƒ Max. fluid temperature: 40 °C ƒƒ Permanently lubricated roller ƒƒ Free ball passage of 45 to 100 mm ƒƒ Mains connection: 3~400 V, 50 Hz bearings ƒƒ Permanently lubricated roller ƒƒ Immersed operating mode: S1 ƒƒ Max. immersion depth: 20 m ƒƒ Non-immersed operating mode with bearings ƒƒ Oil separation chamber with optional ƒƒ Max. immersion depth: 20 m self-cooling motor: S1 external monitoring ƒƒ Protection class: IP 68 ƒƒ Oil separation chamber with optional ƒƒ Max. fluid temperature: 40 °C; external monitoring higher temperatures on request ƒƒ Sealing with rotary shaft seal and mechanical seal, two mechanical seals or one block seal cartridge, depending on motor ƒƒ Free ball passage of 45 to 170 mm ƒƒ Permanently lubricated roller bearings ƒƒ Max. immersion depth: 20 m ƒƒ Heavy-duty version made of cast iron ƒƒ Oil separation chamber with optional external monitoring ƒƒ Sturdy version in cast iron ƒƒ Self-cooling motors for the use in ƒƒ Sturdy version completely in stain- ƒƒ Operationally reliable thanks to wet well and dry well installation less steel casting 1.4581 for the use in corrosive fluids Vortex and single-channel hydraulics ƒƒ Process security thanks to extensive with large free ball passage monitoring devices ƒƒ Process security thanks to extensive ƒƒ Longitudinal watertight cable inlet monitoring devices ƒƒ Special versions for abrasive and cor- Online catalogue: productfinder.wilo.com rosive fluids ƒƒ Longitudinal watertight cable inlet Building services catalogue: ƒƒ Low vibrations and long standstill Drainage and sewage ƒƒ Low vibrations and long standstill times thanks to high-quality compo- times thanks to high-quality compo- nents nents ƒƒ Customised versions are possible Online catalogue: productfinder.wilo.com Water Management catalogue: Online catalogue: productfinder.wilo.com Drainage and sewage – Wastewater transport and dewatering (pumps Water Management catalogue: available ex stock) Drainage and sewage – Wastewater transport and dewatering (order- specific production) General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

67 Product range Submersible sewage pumps Submersible sewage pumps Series Wilo-EMU FA…WR Wilo-EMU KPR … Field of application Duty chart Wastewater collection and transport, Raw water intake, professional irriga- wastewater treatment tion/agriculture, special applications, Design wastewater treatment, dewatering Application +P Volume flow Q max. +P :LOR(08.35 Delivery head H max. :LOR(08  Technical data )$:5    Equipment/function       4OV Special features  Axial submersible pump with glanded Information  motor for use in pipe sumps Pumping cooling or rainwater, cleaned  sewage and for irrigation and pumping sludge        4OV  Submersible sewage pump with mechanical stirring apparatus Pumping sewage and sludge in water treatment applications 72 m3/h 9,500 m3/h 27 m 8.4 m ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Non-immersed operating mode with ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 40 °C; self-cooling motor: S1 ƒƒ Protection class: IP 68 higher temperatures on request ƒƒ Max. fluid temperature: 40 °C; ƒƒ Sealing with two mechanical seals or higher temperatures on request one block seal cartridge, depending ƒƒ Sealing with rotary shaft seal and on motor ƒƒ Free ball passage of 85 to 130 mm mechanical seal, two mechanical ƒƒ Short common pump/motor shaft seals or one block seal cartridge, ƒƒ Permanently lubricated roller depending on motor bearings ƒƒ Free ball passage of 23 to 58 mm ƒƒ Max. immersion depth: 20 m ƒƒ Permanently lubricated roller bearings ƒƒ Heavy-duty version made of cast ƒƒ Max. immersion depth: 20 m iron ƒƒ Heavy-duty version made of cast iron ƒƒ Installation directly in the pressure ƒƒ Mechanical stirring apparatus is pipe fastened directly to the impeller ƒƒ Mixer head made of Abrasit (chilled ƒƒ Angle of propeller blades adjustable cast iron) ƒƒ Process security thanks to extensive ƒƒ Mechanical mixing device made of Abrasit material to avoid deposits in monitoring devices the pump sump ƒƒ Low vibrations and long standstill ƒƒ Process security thanks to extensive monitoring devices times thanks to high-quality compo- ƒƒ Low vibrations and long standstill nents times thanks to high-quality compo- ƒƒ Customised versions are possible nents ƒƒ Customised versions are possible Online catalogue: productfinder.wilo.com Water Management catalogue: Online catalogue: productfinder.wilo.com Drainage and sewage – Wastewater Water Management catalogue: transport and dewatering (order- Drainage and sewage – Wastewater specific production) – Wastewater treatment treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

68 Drainage and sewage Product range Wastewater lifting units Wastewater lifting units for concealed Small sewage lifting units Series floor installation Field of application Wilo-DrainLift TMP Wilo-DrainLift Box Wilo-DrainLift KH 32 Duty chart Wastewater collection and transport Wastewater collection and transport Wastewater collection and transport Design Application H/m Wilo-Drain TMP H/m Wilo-DrainLift Box H/m Wilo-DrainLift KH 32 8 10 5 Volume flow Q max. 6 8 4 Delivery head H max. 4 6 3 Technical data 2 4 2 00 2 4 6 8 10Q/m³/h 2 1 Equipment/function 00 2 4 6 8 10 12 14 Q/m³/h 00 1 2 3 Q/m³/h Wastewater lifting units Wastewater lifting units for concealed Small sewage lifting units For automatic drainage of showers, floor installation washbasins, washing machines/dish- For concealed floor installation, can be For disposal of sewage from a single washers, or for pumping wastewater used for drainage of toilet (free-standing toilets) and e.g. and drainage water which is free of fae- ƒƒ Rooms at risk of flooding an additional washbasin that cannot be ces, fibres, grease and oil, and pumping ƒƒ Garage entrances discharged to the sewer system via the of non-aggressive rainwater ƒƒ Cellar stairways natural fall ƒƒ Showers, washbasins, washing Max. intake/h with S3 operation Max. intake/h with S3 operation 156 / 900 machines, dishwashers 260 l Operating mode Max. intake/h with S3 operation Operating mode S3-10 % / S3-25 % 900 ... 1320 l S3 -25 % ƒƒ Mains connection 1~230 V, 50 Hz Operating mode ƒƒ Mains connection 1~230 V, 50 Hz ƒƒ Fluid temperature max. 35/45 °C, S3-10 % / S3-25 % ƒƒ Max. fluid temperature 35 °C ƒƒ Mains connection 1~230 V, 50 Hz ƒƒ Free ball passage 10 mm for short periods (3 min.) 75/90 °C ƒƒ Max. fluid temperature 35 °C ƒƒ Protection class IP 44 ƒƒ Ventilation connection 25/32 mm ƒƒ Protection class IP 67 ƒƒ Gross tank volume 17 l ƒƒ Protection class IP 44/67 ƒƒ Gross tank volume 85 l ƒƒ Switching volume 2.6 l ƒƒ Gross tank volume 17/32 l ƒƒ Switching volume: 22 l, for type ƒƒ Switching volume 2.6/15 l 40/10: 30 l ƒƒ Ready-to-plug system ƒƒ Ready-to-plug system ƒƒ Ready-to-plug system ƒƒ Level control with pneumatic ƒƒ Plastic tank with ready-mounted ƒƒ Level control with pneumatic pressure transducer (TMP 32) drainage pump, control, pressure pressure transducer ƒƒ Integrated non-return valve pipe and integrated non-return valve ƒƒ Non-return valve ƒƒ Fixation material ƒƒ Mains connection cable with shock- ƒƒ Inlet seal ƒƒ Integrated active carbon filter proof plug ƒƒ Kit for pressure pipe connection ƒƒ Motor monitoring via temperature ƒƒ Fixation material (TMP 32) ƒƒ Level control with float switch ƒƒ Integrated active carbon filter ƒƒ Integrated submersible pump of the TMW series (TMP 40) Special features ƒƒ Contemporary design ƒƒ Easy to install due to integrated ƒƒ Modern, space-saving design ƒƒ Shower drains with a height pump and non-return valve ƒƒ Easy installation due to self-sealing, of 110 mm possible (only in ƒƒ Large tank volume direct toilet connection conjunction with TMP 32-0.5) ƒƒ Easy maintenance ƒƒ Low-noise operation ƒƒ Pumps with pressure pipe removable ƒƒ Easy to maintain due to integrated ƒƒ Stainless steel tile frame with trap submersible pump (TMP 40) Information Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Building services catalogue: Building services catalogue: Building services catalogue: Drainage and sewage Drainage and sewage Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

69 NEW Product range Small sewage lifting units Compact sewage lifting units+P Sewage lifting units Series for front-wall installation with 1 integrated pump +Pwith 1 or 2 integrated pumps Field of application Wilo-DrainLift XS-F Wilo-DrainLift S Wilo-DrainLift M Duty chart Wastewater collection and transport Wilo-RexaLift FIT L Wastewater collection and transport Wastewater collection and transport Design H/m Wilo-DrainLift XS-F Application 5 :LOR'UDLQ/LIW6 'UDLQ/LIW0 4 5H[D/LIW),7/ Volume flow Q max. 3   Delivery head H max. 2   Technical data 1   00 1 2 3 4 5 6 7 8 Q/m³/h   Equipment/function        4PåK  Small sewage lifting units         4PåK Special features For the disposal of sewage from a single Compact sewage lifting units with toilet (wall-mounted toilets) in addition integrated pump Sewage lifting units with 1 or 2 Information to a hand washbasin, shower or bidet, For pumping untreated sewage that integrated pumps the wastewater/sewage of which can- cannot be discharged to the sewer For pumping untreated sewage that not be discharged to the sewer system system via the natural fall cannot be discharged to the sewer via the natural fall system via the natural fall Max. intake/h with S3 operation Max. intake/h with S3 operation 120 l 600 l Max. intake/h with S3 operation Operating mode Operating mode 1050 ... 3600 l S3-30 % S3-15 %, 120 s Operating mode ƒƒ Mains connection 1~230 V, 50 Hz ƒƒ Mains connection 1~230 V, 50 Hz or S3-15 %, 80 s or 120 s ƒƒ Max. fluid temperature 35 °C ƒƒ Mains connection 1~230 V, 50 Hz or ƒƒ Free ball passage 25 mm 3~400 V, 50 Hz ƒƒ Protection class IP 44 ƒƒ Max. fluid temperature 35 °C, 3~400 V, 50 Hz ƒƒ Tank volume 7.9 l ƒƒ Max. fluid temperature 40 °C, ƒƒ Switching volume 1.2 l for short periods 60 °C ƒƒ Protection class (without switchgear) for short periods 60 °C ƒƒ Ready-to-plug system for front-wall ƒƒ Protection class (without switchgear) installation IP 67 ƒƒ Gross tank volume 45 l IP 67 ƒƒ Level control with pneumatic ƒƒ Switching volume 20 l ƒƒ Gross tank volume 62 to 140 l, pressure transducer ƒƒ Ready-to-plug depending on type ƒƒ Potential-free contact ƒƒ Thermal motor monitoring ƒƒ Switching volume 24 to 50 l, ƒƒ Non-return valve ƒƒ Level control with pneumatic ƒƒ Inlet seals depending on type ƒƒ Kit for pressure pipe connection pressure transducer ƒƒ Ready-to-plug ƒƒ Fixation material ƒƒ Potential-free contact ƒƒ Thermal motor monitoring ƒƒ Active carbon filter ƒƒ Pump cable detachable ƒƒ Level control with float switch ƒƒ Non-return valve ƒƒ Mains-independent alarm ƒƒ Quiet operation for high user ƒƒ Inlet seal ƒƒ Potential-free contact comfort ƒƒ Keyhole saw for inlet borehole ƒƒ Pump cable detachable ƒƒ Hose connection for venting ƒƒ Non-return valve (RV version) ƒƒ Reliable due to integrated alarm ƒƒ Hose connection for diaphragm ƒƒ Inlet seal ƒƒ Large scope of delivery (all collars, ƒƒ Keyhole saw for inlet borehole hand pump ƒƒ Hose connection for venting non-return valve, venting set with ƒƒ Fixation material ƒƒ Kit for pressure pipe connection active carbon filter etc.) ƒƒ Soundproofing material ƒƒ Fixation material ƒƒ Space-saving installation, front-wall ƒƒ Soundproofing material Online catalogue: productfinder.wilo.com ƒƒ Switchgear Building services catalogue: installation possible ƒƒ Low system weight for an easy Drainage and sewage ƒƒ Retrospective installation possible installation for draining showers, toilets or other ƒƒ Integrated non-return valve household items ƒƒ Flexible thanks to freely selectable ƒƒ Installation-friendly due to low weight and large scope of delivery inlets incl. non-return valve ƒƒ Operationally reliable thanks to inte- ƒƒ Flexible thanks to freely selectable inlets grated thermal motor protection and ƒƒ Operationally reliable thanks to a mains-independent alarm for SSM reliable pneumatic level detection and high water Online catalogue: productfinder.wilo.com Building services catalogue: Online catalogue: productfinder.wilo.com Drainage and sewage Building services catalogue: Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

70 Drainage and sewage Product range Sewage lifting unit Sewage lifting unit with 2 pumps Pumps station with synthetic tank Series with 2 integrated pumps for dry well installation Field of application Wilo-DrainLift XL Wilo-DrainLift XXL Wilo-DrainLift WS 40 Basic Duty chart Wilo-DrainLift WS 40-50 Wastewater collection and transport Wastewater collection and transport Design Wastewater collection and transport Application :LOR'UDLQ/LIW;/ :LOR'UDLQ/LIW;;/ Volume flow Q max. +P :LOR'UDLQ/LIW Delivery head H max.  +P :6%DVLF Technical data  +P :6:6              4PåK           4PåK Sewage lifting unit with 2 pumps for  Sewage lifting unit with 2 integrated dry well installation pumps        4PåK For pumping untreated sewage that  For pumping untreated sewage that cannot be discharged to the sewer cannot be discharged to the sewer system via the natural fall Pumps station with synthetic tank or system via the natural fall Max. intake/h with S3 operation as sewage lifting unit in the building, as Max. intake/h with S3 operation 26400 ... 55200 l single- or double-pump system 15600 l Operating mode Operating mode S3-25 %, 60 s For pumping untreated sewage that S3-60 %, 120 s ƒƒ Mains connection 3~400 V, 50 Hz cannot be discharged to the sewer ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Operating mode S1 / S3 system via the natural fall ƒƒ Operating mode: S1; S3 ƒƒ Max. fluid temperature 40 °C, ƒƒ Fluid temperature max. 40 °C, 60 m3/h for short periods 60 °C for short periods 60 °C ƒƒ Protection class (without switchgear) 27 m ƒƒ Protection class IP 67 ƒƒ Tank volume 380 l IP 68 ƒƒ Synthetic pumps station made of ƒƒ Switching volume 260 l ƒƒ Gross tank volume 400/800 l recyclable PE ƒƒ Switching volume 305 ... 630 l ƒƒ Maximum upward pressure reliability and inherent stability due to finning ƒƒ Inlets freely selectable on site ƒƒ For supply line in DN 100 ƒƒ Ventilation pipe connection in DN 70 ƒƒ Max. pressure in the pressure pipe 6 bar Equipment/function ƒƒ Thermal motor monitoring ƒƒ Sheath current cooling Wilo-Drain pumps which can be used: Special features ƒƒ Level control with level sensor ƒƒ Thermal motor monitoring and TC 40 Information ƒƒ Potential-free contact TP 50 ƒƒ Pump cable detachable leakage detection TP 65 ƒƒ Inlet seal DN 150 ƒƒ Level control with level sensor MTS 40/21 … 27 ƒƒ Keyhole saw for inlet seal ƒƒ Potential-free contact ƒƒ Non-return valve ƒƒ Pump cable detachable ƒƒ Pressure-tight sump for floor- ƒƒ Hose connection for venting ƒƒ Hose connection for venting mounted or concealed floor instal- ƒƒ Hose connection for diaphragm ƒƒ Hose connection for diaphragm lation hand pump hand pump ƒƒ Flexible thanks to freely selectable ƒƒ Kit for pressure pipe connection ƒƒ Kit for pressure pipe connection inlets ƒƒ Fixation material ƒƒ Fixation material ƒƒ Switchgear with breakdown barrier ƒƒ Switchgear with breakdown barrier ƒƒ Large tank volume ƒƒ Including pipework, level control, ƒƒ Flexible thanks to height-adjustable in the housing and swivel-mounted inlet connec- ƒƒ Flexible use thanks to one or two switchgear and pump (basic version) tion tanks Online catalogue: productfinder.wilo.com ƒƒ Easy operation with menu-guided ƒƒ Optimum tank drainage with deep Building services catalogue: switchgear Drainage and sewage suction function ƒƒ Integrated non-return valve ƒƒ Operationally reliable thanks to large ƒƒ Operationally reliable due to high performance range and a reliable switching volume and reliable level level detection detection ƒƒ Permanent operation (S1) pos- ƒƒ Permanent operation (S1) possible sible due to the use of self-cooling thanks to the use of self-cooling motors motors Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Building services catalogue: Building services catalogue: Drainage and sewage Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

71 Product range Pumps station with synthetic tank+P Pumps station with synthetic tank Series Wilo-DrainLift WS 625 +P Field of application Wilo-DrainLift WS 830 Duty chart Wastewater collection and transport Wilo-DrainLift WS 900 Wilo-DrainLift WS 1100 Design :LOR'UDLQ/LIW:6 Wastewater collection and transport Application  Volume flow Q max.  :LOR'UDLQ/LIW:6 Delivery head H max.  :6:6 Technical data    Equipment/function            4PåK  Special features          4PåK Pumps stations with synthetic tank as single-pump system Pumps station with synthetic tanks, as For pumping untreated sewage that single- or double-pump system cannot be discharged to the sewer system via the natural fall For pumping untreated sewage that 15 m3/h cannot be discharged to the sewer 27 m system via the natural fall ƒƒ Synthetic pumps station made of 180 m3/h recyclable PE 55 m ƒƒ Maximum upward pressure reliability ƒƒ Synthetic pumps station made of due to finning recyclable PE ƒƒ Available in 4 heights: 1,200, 1,500, ƒƒ Maximum upward pressure reliability 1,800 and 2,100 mm due to 2 or 4 lateral fins ƒƒ Sump covers in three versions: ƒƒ 2/4 inlets can be selected on site standard, for walking on, or for ƒƒ Maximum stability due to moulded driving over ƒƒ Max. pressure in the pressure pipe hemispherical shape of the sump 6 bar (MTS 40) or 4 bar floor ƒƒ Wilo surface coupling Wilo-Drain pumps which can be used: ƒƒ Easy accessibility of the level sensor TMW 32 due to installation with hinged TC 40 supporting bar STS 40 ƒƒ Maximum traffic load 5 kN/m2 MTS 40/21 … 27 (in accordance with DIN EN 124, group 1) ƒƒ Max. pressure in the pressure pipe 6 bar Wilo-Drain pumps which can be used: TS 40 TP 50 TP 65 TP 80 FIT V05 PRO V05, V06 MTC 32 MTC 40 MTS 40 ƒƒ Flexible use thanks to three different ƒƒ Flexible installation construction heights ƒƒ Anti-buoyant ƒƒ High stability ƒƒ Inlet connection as standard in DN 100 ƒƒ Complete with integrated fittings and seals ƒƒ Cover (to be walked or driven over) available as an accessory Information Online catalogue: productfinder.wilo.com Online catalogue: productfinder.wilo.com Building services catalogue: Building services catalogue: Drainage and sewage Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

72 Drainage and sewage Product range Solids separation system Submersible pumps Recirculation pump Series Wilo-EMUport FTS MG... Wilo-EMU polder pumps Wilo-EMU RZP 20 to RZP 80-2 Field of application Wilo-EMUport FTS MS... Duty chart Wilo-EMUport FTS FG... Water distribution/boosting, clean Special applications, wastewater Wilo-EMUport FTS FS... water treatment, raw water intake, treatment Design Wastewater collection and transport desalination, dewatering, industrial Application process no illustration Volume flow Q max. +P Delivery head H max. Pumping station for floor mounting or +P Technical data concealed floor installation, in PEHD :LOR(08 :LOR(085=3 For pumping untreated sewage that .3.03'3 Equipment/function cannot be discharged to the sewer   system via the natural fall    4OV  Special features   On request Information On request           4OV Pumps stations ready for connection   ƒƒ With sewage pumps for dry well   installation and solids separation system  ƒƒ Available in sump version (MS, FS) or building version (MG, FG) Polder pump Submersible mixers with housing unit, directly driven or with single-stage ƒƒ Solids separation system Potable and process water from tanks planetary gear --Collection reservoir or shallow bodies of water; municipal Pumping wastewater and sewage --2x solids separation reservoir and industrial water supply; sprinkling with low delivery heads and large --2x sewage pump and irrigation; lowering the ground volume flows, e.g. between equalis- --Complete pipework including inlet water level; utilisation of geothermal ing, nitrification and denitrification and pressure connection and energy and in offshore applications tanks; pumping process, raw, clean and non-return valve cooling water e.g. in paint finishing 1,200 m3/h systems or for clean water treatment; ƒƒ Long service life and corrosion re- 160 m flow generation in water channels, e.g. sistance thanks to PE-HD material ƒƒ Mains connection: 3~400 V, 50 Hz amusement parks ƒƒ Max. fluid temperature: 20 °C 6,800 m3/h ƒƒ Maintenance-friendly as all parts are ƒƒ Minimum flow across outside shroud: 1.1 m accessible from outside ƒƒ Mains connection: 3~400 V, 50 Hz not necessary ƒƒ Immersed operating mode: S1 ƒƒ High operational reliability thanks ƒƒ Max. sand content: 35 g/m3 ƒƒ Protection class: IP 68 to a pre-filtering of solid matter, ƒƒ Up to 10 starts per hour ƒƒ Max. fluid temperature: 40 °C the pumps deliver only the cleaned ƒƒ Max. immersion depth: 300 m ƒƒ Units directly driven or with sewage ƒƒ Multistage submersible pump single-stage planetary gear ƒƒ Retrofit system for the economic ƒƒ Semi-axial impellers ƒƒ Mechanical seal with SiC/SiC pairing reconstruction of old pump stations ƒƒ Hydraulics and motor freely ƒƒ Permanently lubricated roller Online catalogue: productfinder.wilo.com configurable according to power bearings Water Management catalogue: requirements ƒƒ Max. immersion depth: 20 m Drainage and sewage – Wastewater ƒƒ Three-phase motor for direct or ƒƒ Stationary installation directly on the collection and transport star-delta start ƒƒ Motors rewindable as standard flow pipe ƒƒ Deep water lowering thanks to self- ƒƒ Flexible installation via lowering cooling motors ƒƒ Sturdy construction in cast iron or device bronze ƒƒ Vertical or in-line installation ƒƒ Compact construction ƒƒ Maintenance-friendly, rewindable possible motors ƒƒ Optionally with Ceram CT coating for ƒƒ Vertical or in-line installation pos- increasing the efficiency sible Online catalogue: productfinder.wilo.com ƒƒ Self-cleaning propeller to avoid Water Management catalogue: clogging Water supply – Raw water intake ƒƒ Propeller in steel or PUR Online catalogue: productfinder.wilo.com Water Management catalogue: Drainage and sewage – Wastewater treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

73 Product range Submersible mixer Submersible mixer Series extension Series Wilo-EMU TR 14 to TR 28 Wilo-EMU TR 22 to TR 40 Submersible mixer Wilo-EMU TR 50-2 to TR 120-1 Field of application Special applications, wastewater Special applications, wastewater Wilo-EMU TRE 90-2 with IE3 motor treatment treatment Special applications, wastewater Duty chart no illustration no illustration treatment no illustration Design Compact, directly driven submersible Directly driven submersible mixer Submersible mixer with single-stage Application mixer Turbulation of deposits and solids in planetary gear Turbulation of deposits and solids in rain spillway basin and pump sump; Use in activated sludge tanks and Volume flow Q max. rain spillway basin and pump sump; destruction of floating sludge layers; sludge tanks for flow generation, Delivery head H max. destruction of floating sludge layers; further applications in agriculture and suspension of solids, homogenisa- Technical data further applications in agriculture and water supply tion and prevention of floating sludge water supply layers; further applications in industry, Equipment/function agriculture and water supply Special features Thrust: 45 - 330 N Thrust: 185 - 1100 N Thrust: 350 - 6620 N Information ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 40 °C ƒƒ Max. fluid temperature: 40 °C ƒƒ Max. fluid temperature: 40 °C ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Single-stage planetary gear ƒƒ Permanently lubricated roller ƒƒ Permanently lubricated roller ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Permanently lubricated roller bearings bearings ƒƒ Max. immersion depth: 20 m ƒƒ Max. immersion depth: 20 m bearings ƒƒ Max. immersion depth: 20 m ƒƒ Stationary installation on wall and ƒƒ Stationary installation on wall and floor floor ƒƒ Stationary installation on walls ƒƒ Flexible installation via lowering ƒƒ Flexible installation through the use ƒƒ Flexible installation via lowering of lowering device or special pipe device device attachment ƒƒ Can be swivelled horizontally when ƒƒ Can be swivelled vertically and ƒƒ Can be swivelled vertically and horizontally when installed with a installed with a lowering device horizontally when installed with a lowering device ƒƒ Installation with stand allows free lowering device ƒƒ Self-cleaning propeller with Helix placement in basin ƒƒ Low power consumption hub to avoid clogging ƒƒ Single-stage planetary gear ƒƒ Low weight ƒƒ Planetary gear allows transmission of ƒƒ Self-cleaning propeller with Helix ƒƒ Propeller in cast iron, steel or PUR high torques to the propeller with an hub to avoid clogging Online catalogue: productfinder.wilo.com aerodynamic construction ƒƒ Propeller in steel or PUR Water Management catalogue: ƒƒ Exchangeable planetary stage for Drainage and sewage – Wastewater adaptation of the propeller speed Online catalogue: productfinder.wilo.com treatment ƒƒ Self-cleaning propeller with back- Water Management catalogue: ward-bent blades to avoid clogging Drainage and sewage – Wastewater ƒƒ Also with IE3 motor technology (on treatment the basis of IEC 60034-30) ƒƒ Propeller in steel, PUR or PUR/GFK Online catalogue: productfinder.wilo.com Water Management catalogue: Drainage and sewage – Wastewater treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

74 Drainage and sewage Series extension Product range Submersible mixer Treatment process Ventilation Series Wilo-Sevio ACT SD 101 Wilo-Sevio AIR Wilo-EMU TR 212 to TR 226 Field of application Wilo-EMU TR 316 to TR 326 Wastewater treatment, industrial Sewage treatment Duty chart Wilo-EMU TRE with IE3 motor process no illustration Special applications, wastewater treat- no illustration ment no illustration Design Slow-running submersible mixer with Scum skimmer Ventilation system with disc aerator Application two-stage planetary gear reduction Gentle mixing process of biomass For fine-bubble aeration of aqueous Volume flow Q max. Energetically optimised mixing and cir- particles in the pumped fluid media such as water, wastewater or Delivery head H max. culation of activated sludge; generation sludge, for the purposes of supplying Technical data of flow rates in circulation channels; Circulation capacity 3300 – 4000 m3/h oxygen other applications in industry Equipment/function Special features Thrust: 390 - 4950 N Information ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Disc aerator ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 --Outer diameter: 280 mm ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 --Diaphragm diameter: 237 mm ƒƒ Max. fluid temperature: 40 °C ƒƒ Max. fluid temperature: 40 °C --Diaphragm surface area: 0.044 m² ƒƒ Two-stage planetary gear with ƒƒ Max. immersion depth: 20 m --Oxygen utilisation: 6.5 ... 8.5 %/m --Size of the air bubbles: 1-3 mm exchangeable second planetary gear --Pressure loss: 22 ... 43 mbar speed --Connection size: 88.9 ... 90 mm ƒƒ Mechanical seal with SiC/SiC pairing --Max. air temperature in the system/ ƒƒ Permanently lubricated roller disc aerator: 100 °C bearings ƒƒ Max. immersion depth: 20 m ƒƒ Loading range --Air volume range: 1-8 Nm³/h* ƒƒ Installation with stand allows free ƒƒ Height-adjustable suction pipe due --Min. loading: 1.5 Nm³/h* placement in basin to lowering device --Standard loading: 4.0 Nm³/h* --Max. loading: 6,0 Nm³/h* ƒƒ Flexible installation ƒƒ Suction pipe with telescopic A loading of 7.5 Nm³/h* is ƒƒ Two-stage planetary gear with extension possible for short periods (max. 15 minutes). exchangeable second planetary gear * The values for loading apply speed under standard conditions: 0 °C and 1013 hPa. ƒƒ Aeration system including pipework made from PVC or stainless steel, including pre-mounted disc aerator ƒƒ Disc aerator available separately ƒƒ Planetary gear allows transmission ƒƒ Careful introduction of the biomass ƒƒ High operational reliability thanks to of high torques to the propeller with carrier particles into the fluid integrated non-return valve aerodynamic construction ƒƒ Higher volume penetration for opti- ƒƒ High system efficiency due to in- ƒƒ Exchangeable planetary stage for mising the cleaning process creased ventilation capacity adaptation of the propeller speed ƒƒ Reduced energy costs thanks to an ƒƒ Sturdy construction with glass-fibre ƒƒ Self-cleaning propeller with back- improved cleaning performance reinforced plastic ward-bent blades to avoid clogging ƒƒ Also with IE3 motor technology (on ƒƒ Easy installation without gluing or ƒƒ Also with IE3 motor technology (on the basis of IEC 60034-30) welding work the basis of IEC 60034-30) ƒƒ Retrofit option for existing instal- ƒƒ Optimisation of the ventilation pro- Online catalogue: productfinder.wilo.com lations cess in combination with submers- Water Management catalogue: ible mixers Drainage and sewage – Wastewater Documentation on request treatment Documentation on request General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

75 Wilo-RexaLift FIT L General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

76 Subject “Wilo pumps make a major contribution to high process efficiency in industry too.”

Industry 77 Industry Pumps and systems for cooling and heating, for cleaning or for peripheral process support. Wilo vertical turbine pump

78 Industry Finding the right solution Wilo ideas for industry. Every sector of industry has its own extremely high stand- our systems convey important raw materials securely and ards for its production processes and the material of all reliably while in the energy sector, they make a major con- components involved. In light of this, Wilo pumps and sys- tribution to security of supply in power stations, even at tems can contribute in a wide variety of ways to ensuring peak loads. Our pumps are also used in industry for precise highly efficient and highly reliable production. climate control of rooms and factory halls, and for the sup- ply, treatment and disposal of water. For instance, our solutions help the foodstuffs industry to comply with critical quality and hygiene standards, and Regardless of the application, you can depend on our help the metals industry to meet very demanding require- world-renowned quality and system expertise – just as ments and environmental standards. In the mining industry, many well-known industrial companies have before. Salzgitter Flachstahl GmbH, Salzgitter, Germany. Long lifetimes make for low operating costs. The task: Following an expansion of the warm water rolling mill, the increased production also increased the load on the scale-forming water circuit. A second circuit had to be installed. The solution: A highly wear-resistant Wilo-EMU FA 30 submersible pump was used for more than a year and was replaced by two install- ers in just two days. Result: Extremely low life cycle costs.

79

80 Industry Series modification Product range Glanded monobloc pumps Standard glanded pumps Standard glanded pumps Series Field of application Wilo-CronoBloc-BL Wilo-CronoNorm-NL Wilo-CronoNorm-NLG Duty chart Wilo-VeroNorm-NPG Design Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, Application industrial process water supply, industrial process water supply, industrial process Volume flow Q max. H/m Wilo-CronoBloc-BL H/m Wilo-CronoNorm-NL H/m Wilo-VeroNorm-NPG Delivery head H max. 100 50 100 150 200 250 300 Q/m³/h 140 100 200 300 400 500 Q/m³/h 140 Wilo-CronoNorm-NLG Technical data 120 120 80 100 Equipment/function 60 100 40 80 Special features 20 60 80 40 Information 00 20 60 00 40 CronoNorm-NLG VeroNorm-NPG 20 00 500 1000 1500 2000 Q/m³/h Glanded pump in monobloc design with Single-stage low-pressure centrifugal Single-stage low-pressure centrifugal flange connection pump with axial suction, according to pump with axial suction, according to EN 733 and ISO 5199, mounted on a ISO 5199, mounted on a baseplate baseplate For pumping cold and hot water (in ƒƒ For pumping heating water (in ac- ƒƒ For pumping heating water (in ac- accordance with VDI 2035) without cordance with VDI 2035), water-gly- cordance with VDI 2035), water- abrasive substances in heating, cold col mixtures and cooling/cold water glycol mixtures and cooling/cold water and cooling water systems without abrasive substances in heat- water without abrasive substances ing, cold water and cooling systems in heating, cold water and cooling systems ƒƒ Applications in municipal water supply, irrigation, building services, ƒƒ Applications in municipal water general industry, power stations, etc. supply, irrigation, building services, general industry, power stations, etc. 360 m3/h 650 m3/h 105 m 150 m 2,800 m3/h ƒƒ Fluid temperature -20 °C to +140 °C ƒƒ Fluid temperature -20 °C to +120 °C 140 m ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Fluid temperature -20 °C to +120 °C ƒƒ Minimum efficiency index (MEI) up ƒƒ Minimum efficiency index MEI ≥ 0.4 (depending on type) to ≥ 0.4 (for the series) ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Protection class IP 55 ƒƒ Protection class IP 55 ƒƒ Minimum efficiency index MEI ≥ 0.1 ƒƒ Nominal diameter DN 32 to DN 150 ƒƒ Nominal diameter on suction side ƒƒ Max. operating pressure 16 bar (for the series) DN 50 to DN 500 ƒƒ Protection class IP 55 (25 bar on request) ƒƒ Nominal diameter on pressure side ƒƒ Nominal diameters: DN 150 to Single-stage low-pressure centrifugal DN 32 to DN 500 DN 500 (depending on type) pump in monobloc design, with axial ƒƒ Max. operating pressure: varies ƒƒ Max. operating pressure: varies suction port and radially arranged pressure port with according to type and application – according to type and application – ƒƒ Mechanical seal up to 16 bar up to 16 bar ƒƒ Flange connection with pressure ƒƒ Single-stage horizontal spiral hous- ing pump with bearing bracket and ƒƒ Single-stage horizontal spiral hous- measuring connection R ⅛ exchangeable casing wear rings in ing pump with bearing bracket and ƒƒ Lantern process design exchangeable casing wear rings (NLG ƒƒ Coupling ƒƒ Shaft sealing with mechanical seals only) in process design ƒƒ IEC standard motor in accordance with EN 12756 or packing stuffing box ƒƒ Shaft sealing with mechanical seals ƒƒ Spiral housing with cast pump bases in accordance with EN 12756 or ƒƒ Shaft coupling with intermediate packing stuffing box sleeve ƒƒ Spiral housing with cast pump bases ƒƒ Greased grooved ball bearings for bearing of pump shaft ƒƒ Reduced life cycle costs thanks to ƒƒ Reduced life cycle costs thanks to ƒƒ Motors with higher efficiency as optimised efficiency optimised efficiency standard; motors with IE2 technol- ogy if rated motor power is 0.75 kW ƒƒ High corrosion protection thanks to ƒƒ Bidirectional mechanical seal with or more cataphoretic coating of the cast iron forced flushing components ƒƒ Worldwide obtainability of standard ƒƒ Low NPSH values, best cavitation motors and mechanical seals ƒƒ Standard condensate drain holes in properties the motor housings Online catalogue: productfinder.wilo.com ƒƒ Shaft coupling with or without inter- ƒƒ High availability worldwide of mediate sleeve standard motors (according to Wilo specification) and mechanical seals ƒƒ Shaft bending fulfils requirements of ISO 5199 ƒƒ User-friendly thanks to performanc- es and main dimensions according to Online catalogue: productfinder.wilo.com EN 733 (DIN for norm pumps) Online catalogue: productfinder.wilo.com General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

81 Product range Standard pumps in accordance Standard pumps in accordance Standard pumps in accordance Series with EN 733 with EN 733 and EN 22858 with EN 733 Field of application Duty chart Series NOLH Series NESD Series NFCH Series NOEH Series NESE Design Industrial process Application Industrial process Industrial process Volume flow Q max. H/m Wilo-NOLH H/m Wilo-NESD / NESE H/m Wilo-NFCH Delivery head H max. 150 50 100 500 2000Q/m³/h 100 100 Technical data 100 50 50 Equipment/function 50 20 20 20 Special features 10 10 Information 10 5 5 5 22 5 10 00 5 10 50 100 500Q/m³/h 22 5 10 50 100 500Q/m³/h Single-stage low-pressure centrifugal Single-stage low-pressure centrifugal Single-stage low-pressure centrifugal pump mounted on a baseplate pump mounted on a baseplate pump mounted on a baseplate For supplying clean or slightly muddy For heat transfer or circulating hot For pumping mineral or synthetic fluids without solid material. For use in water in industrial processes, for power heat-carrier fluids up to 350 °C, e.g.: the following applications: generation or in building services in industrial processes or power ƒƒ Industrial process generation ƒƒ Non-hygienic food industry ƒƒ Power generation ƒƒ Water circulation in the metals industry ƒƒ Heating, cold water and cooling water systems 1,800 m3/h 600 m3/h 1,000 m3/h 90 m 90 m 140 m ƒƒ Max. permitted fluid temperature ƒƒ Permitted temperature range up to ƒƒ Permitted temperature range -20 °C NESD: 207 °C +350 °C, depending on max. to +120 °C NESE: 0 °C ... 120 °C (40 bar) operating pressure: 120 °C … 200 °C (35 bar) 0 °C ... 120 °C (16 bar) ƒƒ Mains connection 3~400 V, 50 Hz 200 °C ... 230 °C (32 bar) 120 °C … 300 °C (13 bar) ƒƒ Nominal diameter on pressure side ƒƒ Minimum fluid temperature: 170 °C 300 °C ... 350 °C (16 bar) ƒƒ Nominal diameter on pressure side ƒƒ Nominal diameter on pressure side DN 32 to DN 125 DN 32 to DN 125 DN 32 to DN 125 ƒƒ Max. operating pressure PN 16 ƒƒ Max. operating pressure ƒƒ Max. operating pressure PN 16 ƒƒ Minimum efficiency index MEI ≥ 0.1 NESD: PN 25; NESE: PN 40 ƒƒ Single-stage, horizontal centrifugal (NOLH only, for the series) ƒƒ Single-stage, horizontal centrifugal pump with axial suction connection pump with axial suction connection and radial, upwards-facing pressure ƒƒ Single-stage, horizontal centrifugal and radial, upwards-facing pressure connection pump with axial suction connection connection and radial, upwards-facing pressure ƒƒ Dimensions and hydraulic output as ƒƒ Dimensions and hydraulic output as connection per EN 22858 per EN 733 ƒƒ Special self-cooling design allows ƒƒ Dimensions and hydraulic output as use of an uncooled shaft seal. Ad- ƒƒ Self-cooling design with double per EN 733 ditional or external cooling devices temperature barrier allows the use of are not required. an uncooled shaft seal and reduces ƒƒ Hydraulics made from cast iron (ML) ƒƒ Hydraulics in spheroidal cast iron heat loss. or stainless steel (MX) depending on EN‑GS400 (MG version) version. ƒƒ Flange version in accordance with ƒƒ Standard mechanical seal corre- EN 1092-1 sponding to the heat-carrier fluid ƒƒ Sealed by uncooled mechanical seal ƒƒ With or without spacer coupling ƒƒ Version with or without spacer ƒƒ 2 or 4-pole IEC standard motor 50 Hz ƒƒ Version with or without spacer ƒƒ Baseplate steel or cast iron coupling coupling ƒƒ Supplied as a complete unit: ƒƒ 2 or 4-pole IEC standard motor --With pump, coupling, coupling ƒƒ 2 or 4-pole IEC standard motor 50 Hz ƒƒ Baseplate made from steel or cast ƒƒ Supplied as a complete unit: protection, motor and baseplate or iron --Without motor or --With pump, coupling, coupling ƒƒ Supplied as a complete unit: --Pump only, with free shaft end protection, motor and baseplate or ƒƒ Impeller diameter is adjusted to the --With pump, coupling, coupling desired duty point --Without motor or protection, motor and baseplate or ƒƒ 60 Hz or ATEX version on request --Pump only, with free shaft end --Without motor or ƒƒ Impeller diameter is adjusted to the --Pump only, with free shaft end desired duty point ƒƒ Impeller diameter is adjusted to the ƒƒ 60 Hz or ATEX version on request desired duty point Documentation on request Documentation on request ƒƒ Many version options for the shaft seal ƒƒ 60 Hz or ATEX version on request Documentation on request General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

82 Industry Product range Submersible pump Submersible pump Sectional pumps Series Field of application Series Norma V Series MMI 50 V Series RN, HS, IPB, PJ, STD PLURO, Duty chart Industrial process Industrial process FG/FH Industrial process Design Application H/m Wilo-Norma V H/m Wilo-MMI 50 V no illustration 150 10 20 30 50 100 200Q/m³/h 160 5 10 15 20 25 Q/m³/h Volume flow Q max. 100 120 Delivery head H max. Technical data 50 80 Equipment/function 40 20 Special features 10 00 Information 5 21 5 Single-stage submersible pump with Multistage submersible pump Multistage high-pressure multistage pump hydraulics as per EN 733 centrifugal pump in sectional For pumping clean or slightly contami- construction, mounted on baseplate For pumping clean or slightly con- nated water in industrial processes or For industrial use in high-pressure taminated fluids in industrial processes clean water treatment. Ideal in situ- applications, such as: and in sewage treatment as well as for ations where only small installation ƒƒ Metal industry transporting lightweight mineral oil spaces are available ƒƒ Mine drainage products ƒƒ Installation in tanks, vessels, ƒƒ Desalination plants For installation in tanks, vessels, ƒƒ Boiler supply rainwater storage tanks and sumps rainwater storage tanks and sumps ƒƒ Fire fighting ƒƒ High-pressure cleaning 200 m3/h 30 m3/h ƒƒ Water supply 100 m 180 m 1,000 m3/h ƒƒ Permitted temperature range up to ƒƒ Permitted temperature range -20 °C 1800 m ƒƒ Permitted temperature range up to +120 °C to +120 °C ƒƒ Nominal diameter on pressure side ƒƒ Nominal diameter on pressure side +80 °C, or up to +160 °C on request ƒƒ Max. operating pressure 180 bar DN 32 to DN 100 DN 32 to DN 100 ƒƒ Nominal diameter on pressure side ƒƒ Max. operating pressure PN 16 ƒƒ Max. operating pressure PN 10 or PN 16 ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Mains connection 3~400 V, 50 Hz DN 32 to DN 250 ƒƒ Max. viscosity 150 cSt ƒƒ Max. viscosity 150 cSt ƒƒ Single-stage vertical turbine pump, ƒƒ VCS: adjustable base and fixed ƒƒ High-pressure multistage centrifugal pump in sectional construction discharge bend coupling ƒƒ Axial suction ƒƒ VEM: cast iron support and fixed ƒƒ 2 to 15-stage industrial version ƒƒ Connection on pressure side above or ƒƒ Screwed segments coupling ƒƒ Hydraulic axial compensation optionally also below the ƒƒ VTM: bearing block and semi-elastic ƒƒ Shaft sealing with mechanical seal or connection plate ƒƒ Flange version in PN 10/16/25 coupling stuffing box packing ƒƒ Basic versions: ƒƒ VTMRI: bearing block and semi-elas- ƒƒ Optionally with multiple pressure VCS: adjustable base and fixed coupling VEM: cast iron support and fixed tic coupling with internal drain (shaft outlets for e.g.: Fire extinguishing coupling seal) for small installation spaces applications VTM: bearing block and semi-elastic ƒƒ VRI: cast iron support, fixed coupling ƒƒ 2- or 4-pole 50 Hz motors, 60 Hz on coupling and internal drain (shaft seal) for request ƒƒ IEC motor B14/V1, 1450 or 2900 rpm small installation spaces ƒƒ Supplied as a complete unit (60 Hz on request) --With pump, coupling, motor ƒƒ Optional: explosion-proof float switch; ƒƒ Optional: external lubrication of bear- mounted on baseplate or ing or lubrication provided by fluid --Without motor or (default). --As pump only, with free shaft end ƒƒ Low maintenance ƒƒ Low maintenance ƒƒ Modular design ensures pump ver- ƒƒ No shaft sealing ƒƒ No mechanical seal sions in a variety of materials and ƒƒ Noise-free suction ƒƒ Noise-free suction versions which can be adapted to ƒƒ Replaceable IEC standard motor ƒƒ Replaceable IEC standard motor meet customer demands precisely ƒƒ Semi-elastic coupling with the VTM ƒƒ Semi-elastic coupling with the VTM ƒƒ Hydraulic pressure compensation version version relieves load on bearings and ensures ƒƒ Internal seal for pressure side and a longer lifetime. mechanical seal in versions VTMRI ƒƒ Multiple optional pressure connec- and VRI tions allow different pressures to be ƒƒ All parts in contact with fluid are supplied from a single pump made of stainless steel ƒƒ For high-pressure applications Documentation on request Documentation on request Documentation on request General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

83 Product range Axially split case pumps Vertical turbine pumps Glanded high-efficiency pumps in Series in-line design Field of application Wilo-SCP Series VMF, CNE, VAF Duty chart Wilo-Stratos GIGA Cooling, air-conditioning, water distri- Water distribution/boosting, industrial Design bution/boosting, industrial process process Heating, air-conditioning, cooling, Application no illustration industrial process H20/m0 Wilo-SCP Volume flow Q max. 100 H/m Wilo-Stratos GIGA Delivery head H max. 50 20 40 60 80 100Q/m³/h Technical data 50 40 30 Equipment/function 10 20 10 Special features 410 50 100 500 1000 Q/m³/h 00 Low-pressure centrifugal pump with Vertical turbine pumps for dry well High-efficiency in-line pump with EC axially split housing mounted on a installation with submerged axial or motor, electronically controlled, with baseplate semi-axial hydraulics flange connection, in glanded design ƒƒ Pumping heating water in accord- For industrial or municipal water supply and Pumping of heating water (in accord- ance with VDI 2035, water-glycol ƒƒ Irrigation ance with VDI 2035), cold water and mixtures, cooling/cold water and ƒƒ Fire fighting water-glycol mixtures without abrasive process water ƒƒ Cooling water supply substances in heating, cold water and ƒƒ Applications in municipal water ƒƒ Dewatering and flood control cooling systems. supply, irrigation, building services, general industry, power stations, etc. 40,000 m3/h 450 m 3,400 m3/h ƒƒ Permitted temperature range up to 120 m3/h 245 m 52 m ƒƒ Mains connection 3~400 V, 50 Hz 80 °C, or up to 105 °C on request ƒƒ Fluid temperature -20 °C to +140 °C ƒƒ Fluid temperature -8 °C to +120 °C ƒƒ Nominal diameter on pressure side ƒƒ Mains connection: 3~380 V - ƒƒ Protection class IP 55 ƒƒ Nominal diameters - Suction side: DN 100 to DN 2000 3~480 V (±10 %), 50/60 Hz ƒƒ Minimum efficiency index MEI ≥ 0.7 DN 65 to DN 500 For types of installation with pressure ƒƒ Pressure side: DN 50 to DN 400 port, for concealed floor, floor-mount- (for the series) ƒƒ Max. operating pressure: ed or twin-ceiling installation ƒƒ Protection class IP 55 ƒƒ Design: ƒƒ Max. operating pressure 16 bar up to 16 or 25 bar, depending on type 1- or 2-stage, low-pressure centrifugal --As removable or permanent +120 °C, 13 bar up to +140 °C pump in monobloc design installation Single-stage, low-pressure centrifugal ƒƒ Deliverable as complete unit or with- pump in in-line design with -- With axial or semi-axial, single or ƒƒ Mechanical seal out motor or only pump hydraulics multistage hydraulics ƒƒ Flange connection ƒƒ Shaft sealing with mechanical seal or ƒƒ Lantern --With open shaft for bearing ƒƒ Coupling stuffing box packing lubrication with the fluid, or with ƒƒ Electronically controlled EC motor ƒƒ 4-pole and 6-pole motors shaft trim for separate bearing lubrication Materials: ƒƒ Pump housing: EN-GJL-250 ƒƒ Drive options: Electric motor, diesel ƒƒ Impeller: G-CuSn5 ZnPb motor or steam turbine ƒƒ Shaft: X12Cr13 ƒƒ Minimum surface area needed ƒƒ Higher capacities up to 17,000 m3/h ƒƒ High hydraulic efficiency ƒƒ Innovative high-efficiency pump for on request ƒƒ Submerged pump hydraulics highest overall efficiency based on a ƒƒ Design to order as per customer new design for Wilo glanded pumps ƒƒ Special motors and other materials on request specifications ƒƒ Highly efficient EC motor (efficiency higher than IE4 limit values according Information Online catalogue: productfinder.wilo.com Documentation on request to IEC TS 60034-31 Ed.1) ƒƒ Highly efficient hydraulics which is optimally adapted to the EC motor technology, with optimised efficiency, minimum efficiency index (MEI) ≥ 0.7 according to ErP Directive 2009/125/ EC [Commission Regulation (EU) 547/2012]. ƒƒ Control range is up to three times higher than for conventional elec- tronically controlled pumps Online catalogue: productfinder.wilo.com Building Services catalogue: Heating, air-conditioning, cooling General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

84 Industry Series modification Product range Glanded energy-saving pumps in Glanded energy-saving pumps in Glanded energy-saving pumps in Series in-line design in-line design monobloc design Field of application Duty chart Wilo-VeroLine-IP-E Wilo-CronoLine-IL-E Wilo-CronoBloc-BL-E Wilo-VeroTwin-DP-E Wilo-CronoTwin-DL-E Design Application Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, Volume flow Q max. industrial process industrial process industrial process Delivery head H max. Technical data H/m Wilo-VeroLine-IP-E H/m Wilo-CronoLine-IL-E H/m Wilo-CronoBloc-BL-E 25 Wilo-VeroTwin-DP-E 60 Wilo-CronoTwin-DL-E 80 50 100 150 200 250 300 Q/m³/h Equipment/function 70 20 50 60 Special features 15 50 VeroTwin-DP-E 40 40 Information VeroLine-IP-E 30 10 30 CronoTwin-DL-E 20 20 10 5 10 CronoLine-IL-E 00 00 20 40 60 80 100 120 140 Q/m³/h 00 100 200 300 400 500 600 Q/m³/h Electronically controlled glanded pump Electronically controlled glanded pump Electronically controlled glanded single in in-line design with flange connection in in-line design with flange connection pump in monobloc design with flange and automatic power adjustment and automatic power adjustment connection and automatic power adjustment For pumping heating water (in accord- For pumping heating water (in accord- For pumping heating water (in accord- ance with VDI 2035), water-glycol ance with VDI 2035), water-glycol ance with VDI 2035), water-glycol mixtures and cooling and cold water mixtures and cooling and cold water mixtures, cooling water and cold water without abrasive substances in heating, without abrasive substances in heating, without abrasive substances in heating, cold water and cooling water systems cold water and cooling water systems cold water and cooling water systems. 170 m3/h 800 m3/h 380 m3/h 30 m 65 m 85 m ƒƒ Fluid temperature -20 °C to +120 °C ƒƒ Fluid temperature -20 °C to +140 °C ƒƒ Fluid temperature -20 °C to +140 °C ƒƒ Mains connection: ƒƒ Mains connection: ƒƒ Mains connection: 3~440 V ±10 %, 50/60 Hz 3~440 V ±10 %, 50/60 Hz 3~440 V ±10 %, 50/60 Hz 3~400 V ±10 %, 50/60 Hz 3~400 V ±10 %, 50/60 Hz 3~400 V ±10 %, 50/60 Hz 3~380 V -5 %/+10 %, 50/60 Hz 3~380 V -5 %/+10 %, 50/60 Hz 3~380 V -5 %/+10 %, 50/60 Hz ƒƒ Minimum efficiency index (MEI) up ƒƒ Minimum efficiency index (MEI) up ƒƒ Minimum efficiency index (MEI) up to ≥ 0.4 to ≥ 0.4 to ≥ 0.4 ƒƒ Protection class IP 55 ƒƒ Protection class IP 55 ƒƒ Protection class IP 55 ƒƒ Nominal diameter DN 32 to DN 80 ƒƒ Nominal diameter DN 40 to DN 80 ƒƒ Nominal diameter DN 32 to DN 125 ƒƒ Max. operating pressure 10 bar ƒƒ Max. operating pressure 16 bar ƒƒ Max. operating pressure 16 bar (120 °C) (special version: 16 bar) Single-stage, low-pressure centrifugal Single-stage, low-pressure centrifugal Single-stage low-pressure centrifugal pump in in-line design with pump in in-line design with pump in monobloc design (axial suction ƒƒ Mechanical seal ƒƒ Mechanical seal port, radial pressure port) with ƒƒ Flange connection ƒƒ Flange connection ƒƒ Mechanical seal ƒƒ Motor with integrated electronic ƒƒ Lantern ƒƒ Flange connection with pressure control ƒƒ Coupling ƒƒ DP-E with switchover valve ƒƒ Motor with integrated electronic measuring connection R⅛ ƒƒ Lantern control ƒƒ Coupling ƒƒ DL-E with switchover valve ƒƒ Energy savings thanks to integrated ƒƒ Energy savings thanks to integrated electronical performance adaptation ƒƒ Energy savings thanks to integrated electronical performance adaptation electronical performance adaptation ƒƒ Optional interfaces to bus communi- ƒƒ Optional interfaces to bus communi- cation thanks to plug-in IF-Modules ƒƒ Optional interfaces to bus communi- cation thanks to plug-in IF-Modules cation thanks to plug-in IF-Modules ƒƒ Easy operation with red-button ƒƒ Easy operation with red-button tech- technology and display ƒƒ Easy operation with red-button nology and display technology and display ƒƒ Integrated dual pump management ƒƒ Integrated full motor protection (PTC) ƒƒ Integrated full motor protection ƒƒ Integrated dual pump manage- with trip electronics ment Different operating modes: (PTC) with trip electronics main/standby operation and parallel ƒƒ User-friendly thanks to performances operation and main dimensions according to EN 733 (DIN for norm pumps) ƒƒ Integrated full motor protection Online catalogue: productfinder.wilo.com (PTC) with trip electronics Online catalogue: productfinder.wilo.com Building Services catalogue: Online catalogue: productfinder.wilo.com Building Services catalogue: Heating, air-conditioning, cooling Building Services catalogue: Heating, air-conditioning, cooling Heating, air-conditioning, cooling General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

85 Series modification Series modification Product range Glanded standard pumps in Glanded standard pumps in Special glanded pumps in Series in-line design in-line design in-line design Field of application Duty chart Wilo-VeroLine-IPL Wilo-CronoLine-IL Wilo-VeroLine-IPH-W Wilo-VeroTwin-DPL Wilo-CronoTwin-DL Wilo-VeroLine-IPH-O Design Application Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, industrial process industrial process industrial process Volume flow Q max. Delivery head H max. H/m Wilo-VeroLine-IPL H/m Wilo-CronoLine-IL H/m Wilo-VeroLine-IPH-O/-W Technical data 50 Wilo-VeroTwin-DPL 100 Wilo-CronoTwin-DL 35 10 20 30 40 50 60 Q/m³/h CronoLine-IL 30 40 80 25 60 CronoTwin-DL 20 30 VeroTwin-DPL 40 15 20 200 400 600 800 1000Q/m³/h 10 20 VeroLine-IPL 5 10 00 00 00 50 100 150 200Q/m³/h Glanded pump in in-line design with Glanded pump in in-line design with Glanded pump in in-line design with screwed connection or flange connec- flange connection flange connection tion For pumping heating water (in accord- For pumping heating water (in accord- IPH-W: For pumping hot water without ance with VDI 2035), water-glycol ance with VDI 2035), water-glycol abrasive substances in closed industrial mixtures and cooling and cold water mixtures and cooling and cold water circulation systems, district heating, without abrasive substances in heating, without abrasive substances in heating, closed heating systems, etc. cold water and cooling water systems cold water and cooling water systems IPH-O: For pumping heat transfer oil in closed industrial circulation systems 245 m3/h 1,150 m3/h 80 m3/h 52 m 110 m 38 m ƒƒ Fluid temperature -20 °C to +120 °C ƒƒ Fluid temperature -20 °C to +140 °C ƒƒ Fluid temperature IPH-W: -10 °C to ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Minimum efficiency index (MEI) up ƒƒ Minimum efficiency index (MEI) up +210 °C (at max. 23 bar) ƒƒ Fluid temperature IPH-O: -10 °C to to ≥ 0.4 to ≥ 0.4 ƒƒ Protection class IP 55 ƒƒ Protection class IP 55 +350 °C (at max. 9 bar) ƒƒ Nominal diameter Rp 1 to DN 100 ƒƒ Nominal diameter DN 32 to DN 250 ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Max. operating pressure 10 bar ƒƒ Max. operating pressure 16 bar ƒƒ Protection class IP 55 ƒƒ Nominal diameter DN 20 to DN 80 (special version: 16 bar) (25 bar on request) Equipment/function Single-stage, low-pressure centrifugal ƒƒ Single-stage, low-pressure centrifu- Single-stage, low-pressure centrifugal Special features pump in in-line design with gal pump in in-line design with pump in in-line design with ƒƒ Mechanical seal ƒƒ Mechanical seal Information ƒƒ Flange connection with pressure ƒƒ Mechanical seal ƒƒ Flange connection ƒƒ Flange connection with pressure ƒƒ Lantern measuring connection R ⅛ ƒƒ Motor with special shaft ƒƒ Motor with one-piece shaft measuring connection R ⅛ ƒƒ Bidirectional, self-cooling mechani- ƒƒ DPL with switchover valve ƒƒ Lantern ƒƒ High corrosion protection due to ƒƒ Coupling cal seal ƒƒ IEC standard motor ƒƒ Great variety of applications due cataphoretic coating ƒƒ DL with switchover valve ƒƒ Standard condensate drain holes in to a wide fluid temperature range ƒƒ Reduced life cycle costs thanks to without additional wear parts the motor housings and lanterns optimised efficiency ƒƒ Series version: Motor with one-piece Online catalogue: productfinder.wilo.com ƒƒ Standard condensate drain holes in shaft the motor housings ƒƒ N Version: Standard motor B5 or V1 ƒƒ Flexible use in air-conditioning and with stainless steel plug shaft cooling systems, with application ƒƒ Bidirectional mechanical seal with advantages like targeted condensate draining by optimised lantern design forced flushing (patented) ƒƒ DPL: Main-/standby operation or ƒƒ High corrosion protection due to peak-load operation (via additional cataphoretic coating external device) ƒƒ High availability worldwide of stand- Online catalogue: productfinder.wilo.com ard motors (according to Wilo speci- Building Services catalogue: fications) and standard mechanical Heating, air-conditioning, cooling seals ƒƒ Main-/standby operation or peak- load operation (with additional external device) Online catalogue: productfinder.wilo.com Building Services catalogue: Heating, air-conditioning, cooling General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

86 Industry Product range Special glanded pumps in Glanded monobloc pumps Glanded special pumps Series in-line design Wilo-BAC Wilo-VeroLine-IP-Z Field of application Duty chart Wilo-VeroLine-IPS Design Heating, air-conditioning, cooling, Heating, air-conditioning, cooling, Secondary hot water Application industrial process industrial process Volume flow Q max. H/m Wilo-VeroLine-IPS H/m Wilo-BAC H/m Wilo-VeroLine-IP-Z Delivery head H max. 3 25 10 20 30 40 50 60 70 Q/m³/h 5 Technical data 20 4 2 15 3 Equipment/function 10 2 1 5 1 Special features 00 00 1 2 3 4 5Q/m³/h 00 4 8 12 Q/m³/h Information Glanded pump in monobloc design Glanded circulation pump in in-line Glanded pump in in-line design with with screwed connection or Victaulic design with screwed connection screwed connection or flange connec- connection tion For pumping potable water, cold and For pumping cold and hot water (in For pumping water-glycol mixtures hot water (in accordance with VDI 2035) accordance with VDI 2035) without with a glycol volume proportion of 20 without abrasive substances, in heating, abrasive substances in heating, cold to 40 % cold water and cooling water systems water and cooling water systems 13 m3/h 85 m3/h 5 m3/h 3 m 25 m 4.5 m ƒƒ Fluid temperature -10 °C to +140 °C ƒƒ Fluid temperature -15 °C to +60 °C ƒƒ Fluid temperature: secondary hot ƒƒ Mains connection 3~230 V, 3~400 V, ƒƒ Mains connection 3~400 V, 50 Hz ƒƒ Minimum efficiency index MEI ≥ 0.4 water up to a water hardness of 50 Hz 4.99 mmol/l (28 °d) max. +65 °C ƒƒ Minimum efficiency index MEI ≥ 0.1 (for the series) ƒƒ In short-term operation (2 h) up to ƒƒ Protection class IP 54 +110 °C (for the series) ƒƒ Nominal diameter G2/G 1½ (only ƒƒ Heating water -8 °C to +110 °C ƒƒ Protection class IP 55 ƒƒ Mains connection 1~230 V, 50 Hz, ƒƒ Nominal diameter Rp 1, DN 40 and BAC 40…/S) or Victaulic connection 3~400 V, 50 Hz ∅ 60.3/48.3 mm (BAC 40… /R) ƒƒ Protection class IP 44 DN 50 ∅ 76.1/76.1 mm (BAC 70…/R) ƒƒ Nominal diameter Rp 1 ƒƒ Max. operating pressure 10 bar, or ƒƒ Max. operating pressure 6.5 bar ƒƒ Max. operating pressure 10 bar 6 bar for flange connection Single-stage, low-pressure centrifugal pump in in-line design with Single-stage, low-pressure centrifugal Single-stage low-pressure centrifugal ƒƒ Mechanical seal pump in in-line design with pump in monobloc design, with axial ƒƒ Screwed connection ƒƒ Mechanical seal or stuffing box suction port and radially arranged ƒƒ Motor with one-piece shaft pressure port packing ƒƒ Screwed or flange connection with pressure measuring connection R ⅛ ƒƒ Standard motor ƒƒ Worldwide availability of the stand- ƒƒ Reduced life cycle costs thanks to ƒƒ High resistance to corrosive fluids ard motors used optimised efficiency due to stainless steel housing and Noryl impeller ƒƒ Bidirectional mechanical seal with ƒƒ Pump housing in plastic material forced flushing version ƒƒ Wide range of applications due to suitability for water hardness up to Online catalogue: productfinder.wilo.com ƒƒ Version with Victaulic or threaded 5 mmol/l (28 °dH) connection (BAC 70/135... only with Victaulic connection) ƒƒ All plastic parts that come into contact with the fluid fulfil KTW Online catalogue: productfinder.wilo.com recommendations Online catalogue: productfinder.wilo.com Building Services catalogue: Heating, air-conditioning, cooling General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

87 Product range Submersible pumps Submersible pumps Submersible pumps Series Wilo-EMU polder pumps Field of application Wilo-Sub TWI 4 … Wilo-EMU 6\" series Duty chart Wilo-Sub TWI 6 … Wilo-EMU 8\" series Wilo-Sub TWI 8 … Wilo-EMU 10\"…24\" series Design Wilo-Sub TWI 10 … Application Rainwater utilisation, water distribu- Water distribution/boosting, clean Water distribution/boosting, clean Volume flow Q max. tion/boosting, clean water treatment, water treatment, raw water intake, water treatment, raw water intake, Delivery head H max. raw water intake, desalination, desalination, professional irrigation/ desalination, dewatering, industrial Technical data professional irrigation/agriculture agriculture process Equipment/function +P +P  +P Special features  :LOR6XE  :LOR(08Å :LOR(08   7:,  Å Å ÅÅÅ      .3.03'3 Information             4PåK   ÅÅ    4OV    4OV          Submersible pump, multistage Submersible pump with sectional Polder pump construction Water supply (including potable water Supply of potable and other water from Potable and process water from tanks supply) from boreholes and rainwater boreholes and rainwater storage tanks; or shallow bodies of water; municipal storage tanks; municipal and industrial process water supply; municipal and and industrial water supply; sprinkling water supply; sprinkling and irrigation; industrial water supply; sprinkling and and irrigation; lowering the ground pressure boosting; lowering the ground irrigation; pressure boosting; lower- water level; utilisation of geothermal water level; pumping of water without ing the ground water level; utilisation energy and in offshore applications long-fibre or abrasive components of geothermal energy and in offshore applications 165 m3/h 2,400 m3/h 1,200 m3/h 500 m 160 m ƒƒ Mains connection: 1~230 V, 50 Hz 560 m ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Max. fluid temperature: 20 °C (only TWI 4 …) or 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Minimum flow across outside shroud: ƒƒ Fluid temperature: 3-20 °C or ƒƒ Max. fluid temperature: 20 ... 30 °C ƒƒ Minimum flow rate at motor: 0.1 ... not necessary 3-30 °C ƒƒ Max. sand content: 35 g/m3 ƒƒ Minimum flow rate at motor: 0.08- 0.5 m/s ƒƒ Up to 10 starts per hour ƒƒ Max. sand content: 35 g/m³ ƒƒ Max. immersion depth: 300 m 0.5 m/s ƒƒ Up to 10 starts per hour ƒƒ Max. sand content: 50 g/m³ ƒƒ Max. immersion depth: 100 or ƒƒ Up to 10 or 20 starts per hour ƒƒ Max. immersion depth: 100-350 m 300/350 m ƒƒ Minimum efficiency index MEI: up to ƒƒ Minimum efficiency index MEI: up to ≥ 0.7 (for the series TWI 4 and TWI 6) ≥ 0.7 (for the series NK 6...) ƒƒ Multistage submersible pump with ƒƒ Multistage submersible pump ƒƒ Multistage submersible pump radial or semi-axial impellers ƒƒ Radial or semi-axial impellers ƒƒ Semi-axial impellers ƒƒ Hydraulics and motor freely configur- ƒƒ Hydraulics and motor freely ƒƒ Integrated non-return valve ƒƒ NEMA coupling able according to power requirements configurable according to power ƒƒ Single-phase or three-phase ƒƒ Integrated non-return valve requirements ƒƒ Three-phase motor for direct or AC motor (depending on type) star-delta start ƒƒ NEMA coupling or standardised con- ƒƒ Motors rewindable as standard ƒƒ Corrosion-resistant thanks to stain- less steel version nection ƒƒ Deep water lowering thanks to self- ƒƒ Three-phase motor for direct or star- cooling motors ƒƒ Flexible installation thanks to vertical and horizontal installation delta start ƒƒ Sturdy construction in cast iron or bronze ƒƒ Easy installation due to integrated ƒƒ Sturdy waterworks version in cast non-return valve iron or zinc-free bronze ƒƒ Compact construction ƒƒ Maintenance-friendly, rewindable ƒƒ Large performance range ƒƒ Pressure shroud in corrosion- resistant and hygienic stainless motors Online catalogue: productfinder.wilo.com steel version with rubber bearing for ƒƒ Optionally with Ceram CT coating for Building Services catalogue: minimising noise and vibrations Water supply increasing the efficiency Water Management catalogue: ƒƒ Maintenance-friendly motors Online catalogue: productfinder.wilo.com Water supply – Raw water intake ƒƒ Optionally with Ceram CT coating for Water Management catalogue: Water supply – Raw water intake increasing the efficiency Online catalogue: productfinder.wilo.com Water Management catalogue: Water supply – Raw water intake General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

88 Industry Product range Submersible drainage pumps Pedestal pumps Submersible drainage pumps Series Wilo-Drain TMT Field of application Wilo-Drain TMC Wilo-Drain VC Wilo-Drain TS 40 Duty chart Special applications, dewatering, Wilo-Drain TS 50 industrial process Professional irrigation/agriculture, Wilo-Drain TS 65 Design special applications, dewatering, Wastewater collection and transport, Application industrial process dewatering, industrial process Volume flow Q max. Delivery head H max. +P :LOR'UDLQ9& :LOR'UDLQ Technical data +P 76 +P Equipment/function :LOR'UDLQ  70770&   Special features       4PåK        4PåK  Information   Vertical drainage pumps    Pumping of wastewater and conden-   sate up to 95 °C from pump sumps and from cellars at risk of flooding      4PåK   14 m3/h Submersible drainage pumps 20 m Submersible drainage pumps ƒƒ Mains connection 1~230 V, 50 Hz or Pumping of condensate, hot water and For pumping wastewater in house/site aggressive media in industrial applica- 3~400 V, 50 Hz drainage, in environmental and water tions ƒƒ Protection class IP 54 treatment technology and industrial ƒƒ Fluid temperature +5 °C to +95 °C and process engineering 22 m3/h ƒƒ Free ball passage 5 or 7 mm, 53 m3/h 13 m 25 m ƒƒ Mains connection 3~400 V, 50 Hz depending on type ƒƒ Mains connection 1~230 V, 50 Hz or ƒƒ Immersed operating mode: S1 ƒƒ Pressure port Rp 1¼ or Rp 1½ ƒƒ Non-immersed operating mode: S3 3~400 V, 50 Hz depending on type ƒƒ Immersed operating mode: S1 25 % ƒƒ Non-immersed operating mode: S3 ƒƒ Protection class IP 68 ƒƒ Max. immersion depth 5 m 25 % ƒƒ Fluid temperature 95 °C, 65 °C ƒƒ Protection class IP 68 ƒƒ Immersion depth 5 to 10 m non-immersed ƒƒ Fluid temperature 3 °C to 35 °C ƒƒ Cable length 10 m ƒƒ Free ball passage 10 mm ƒƒ Free ball passage 10 mm ƒƒ Pressure port Rp 1½, Rp 2 or Rp 2½ ƒƒ Pressure port Rp 1¼ or Rp 1½ depending on type depending on type ƒƒ Pump housing and impeller made of ƒƒ Attached float switch ƒƒ Ready-to-plug versions also with grey cast iron, bronze or stainless float switch steel, depending on version ƒƒ For fluids up to 95 °C ƒƒ Long service life ƒƒ Thermal motor monitoring ƒƒ For fluids up to 95 °C ƒƒ Easy operation thanks to attached ƒƒ Explosion protection for TS 50 and ƒƒ Versions in bronze or in stainless float switch TS 65 steel casting for aggressive fluids ƒƒ Long standstill times possible ƒƒ Connection cable 10 m ƒƒ Sealed cable inlet ƒƒ Integrated motor protection with ƒƒ Connection cable detachable ƒƒ Integrated non-return valve for Online catalogue: productfinder.wilo.com thermal relay Building services catalogue: Online catalogue: productfinder.wilo.com TS 40 Drainage and sewage Building services catalogue: ƒƒ Hose connection for TS 40 Water Management catalogue: Drainage and sewage ƒƒ Low weight Drainage and sewage – Wastewater Water Management catalogue: ƒƒ Large performance range transport and dewatering Drainage and sewage – Wastewater ƒƒ Oil separation chamber transport and dewatering ƒƒ Easy operation thanks to attached float switch and plug (A version) Online catalogue: productfinder.wilo.com Building services catalogue: Drainage and sewage General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

89 Product range Series modification Submersible sewage pumps Submersible sewage pumps Series Submersible drainage pumps Field of application Wilo-EMU KS Wilo-Drain TP 80 Wilo-EMU FA 30 … to FA 60 … Duty chart Wilo-Drain TP 100 Dewatering, industrial process Wilo-Drain TP...-AM Special applications, wastewater Design Special applications, wastewater collection and transport, dewatering, Application +P collection and transport, dewatering, industrial process Volume flow Q max. +Pindustrial process Delivery head H max. +P :LOR(08 Technical data :LOR(08.6 :LOR'UDLQ73 )$)$  7373$0  Equipment/function     Special features       4OV Information          4PåK  Submersible sewage pump with Submersible sewage pump for industrial glanded motors or self-cooling motors     4PåK applications Pumping sewage with solid content  Pumping heavily contaminated fluids, in wastewater treatment plants and for environmental and water treatment pumping stations; local drainage and Submersible drainage pumps in rugged technology and industrial and process industrial applications design for use on building sites engineering 7,950 m3/h 180 m3/h 87 m For drainage of excavation pits, cellar 21 m ƒƒ Mains connection: 3~400 V, 50 Hz areas, sumps and basins. Ideally suited ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Immersed operating mode: S1 for use in fountains ƒƒ Immersed operating mode: S1 ƒƒ Non-immersed operating mode with ƒƒ Non-immersed operating mode: S1 340 m3/h ƒƒ Protection class: IP 68 self-cooling motor: S1 71 m ƒƒ Insulation class: F ƒƒ Protection class: IP 68 ƒƒ Mains connection 1~230 V, 50 Hz or ƒƒ Thermal winding monitoring ƒƒ Max. fluid temperature: 40 °C; ƒƒ Sealing chamber control 3~400 V, 50 Hz ƒƒ Max. fluid temperature: 40 °C higher temperatures on request ƒƒ Operating mode S1 ƒƒ Free ball passage: 80 or 100 mm ƒƒ Sealing with rotary shaft seal and ƒƒ Max. fluid temperature 40 °C ƒƒ Max. immersion depth: 20 m ƒƒ Protection class IP 68 mechanical seal, two mechanical ƒƒ Sealed by double mechanical seal ƒƒ Thermal motor monitoring seals or one block seal cartridge, ƒƒ Maintenance-free roller bearing ƒƒ Sealing chamber monitoring depending on motor ƒƒ ATEX approval ƒƒ Free ball passage of 80 to 170 mm ƒƒ Bidirectional mechanical seal ƒƒ Permanently lubricated roller ƒƒ Heavy-duty motors (oil-filled and (not for “AM” version) bearings ƒƒ Sheath current cooling ƒƒ Max. immersion depth: 20 m dry) ensure permanent operation ƒƒ Model “AM” with float switch, ƒƒ Heavy-duty version made of cast even with non-immersed motor iron ƒƒ Corrosion-resistant components CEE-plug and transport frame ƒƒ Oil separation chamber with optional external monitoring ƒƒ Long service life ƒƒ Self-cooling motor for the use in wet ƒƒ Self-cooling motors for the use in ƒƒ Sturdy construction well and dry well installations wet well and dry well installation ƒƒ Slurping operation possible ƒƒ Suitable for permanent operation ƒƒ Corrosion-resistant stainless steel ƒƒ Process security thanks to extensive motor housing in 1.4404 monitoring devices (S1) ƒƒ Ready-to-plug ƒƒ Patented non-clogging hydraulics ƒƒ Special versions for abrasive and cor- ƒƒ Longitudinal watertight cable inlet rosive fluids Online catalogue: productfinder.wilo.com ƒƒ Low weight Building services catalogue: ƒƒ Low vibrations and long standstill Drainage and sewage Online catalogue: productfinder.wilo.com times thanks to high-quality compo- Water Management catalogue: Building services catalogue: nents Drainage and sewage – Wastewater Drainage and sewage transport and dewatering (pumps Water Management catalogue: ƒƒ Customised versions are possible available ex stock) Drainage and sewage – Wastewater transport and dewatering Online catalogue: productfinder.wilo.com Water Management catalogue: Drainage and sewage Water Management catalogue: Drainage and sewage – Wastewater treatment General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

90 Industry Product range +PSubmersible sewage pumps Submersible mixer Treatment process Series Wilo-Sevio MIX DM 50-2 Wilo-Sevio ACT SD 101 Field of application Wilo-EMU FA…RF Special applications, industrial process Wastewater treatment, industrial Duty chart no illustration process Special applications, wastewater no illustration Design collection and transport, industrial Submersible mixer with single-stage Application process planetary gear Scum skimmer Volume flow Q max. Pumping of drilling mud on on-shore Gentle mixing process of biomass Delivery head H max. :LOR(08 and off-shore installations particles in the pumped fluid Technical data  )$5) Thrust: 1010 N Circulation capacity 3300 – 4000 m3/h  ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Mains connection: 3~400 V, 50 Hz Equipment/function  ƒƒ Immersed operating mode: S1 ƒƒ Immersed operating mode: S1 ƒƒ Protection class: IP 68 ƒƒ Protection class: IP 68 Special features  ƒƒ Max. fluid temperature: 90 °C ƒƒ Max. fluid temperature: 40 °C ƒƒ Single-stage planetary gear ƒƒ Max. immersion depth: 20 m Information        4OV ƒƒ Mechanical seal with SiC/SiC pairing ƒƒ Permanently lubricated roller ƒƒ Height-adjustable suction pipe due Submersible sewage pumps made of to lowering device cast stainless steel bearings Pumping sewage with solid content in ƒƒ Max. immersion depth: 20 m ƒƒ Suction pipe with telescopic water treatment systems and industrial extension applications ƒƒ Flexible installation via lowering 70 m3/h device 30 m ƒƒ Mains connection: 3~400 V, 50 Hz ƒƒ Can be swivelled horizontally when ƒƒ Immersed operating mode: S1 installed with a lowering device ƒƒ Protection class: IP 68 ƒƒ Max. fluid temperature: 40 °C; ƒƒ Single-stage planetary gear higher temperatures on request ƒƒ Sealing with two mechanical seals or one block seal cartridge, depending on motor ƒƒ Free ball passage of 35 to 45 mm ƒƒ Permanently lubricated roller bearings ƒƒ Max. immersion depth: 20 m ƒƒ Oil separation chamber with optional external monitoring ƒƒ Sturdy version completely in stain- ƒƒ Sturdy construction for fluid tem- ƒƒ Careful introduction of the biomass less steel casting 1.4581 for the use peratures of up to 90 °C carrier particles into the fluid in corrosive fluids ƒƒ Exchangeable planetary stage for ƒƒ Higher volume penetration for opti- ƒƒ Process security thanks to extensive adaptation of the propeller speed mising the cleaning process monitoring devices ƒƒ Stainless steel propeller with high ƒƒ Reduced energy costs thanks to an ƒƒ Longitudinal watertight cable inlet wear resistance improved cleaning performance ƒƒ Low vibrations and long standstill ƒƒ Ex approval as standard ƒƒ Also with IE3 motor technology (on times thanks to high-quality compo- the basis of IEC 60034-30) nents ƒƒ Retrofit option for existing instal- Online catalogue: productfinder.wilo.com Documentation on request lations Water Management catalogue: Documentation on request Drainage and sewage – Wastewater transport and dewatering (pumps available ex stock) General Overview – Delivery range – Edition 2014 – 50 Hz – Subject to change without prior notice.

“Engineering technology that is both efficient and easy to use, that’s what I call Pioneering for You.” Thomas Keil, Design Engineer, WILO SE Hof/Germany At Wilo, we offer you the best of German engineering for water management. We develop our systems so that they do not only meet the highest efficiency standards but can also be installed quickly and operated easily. So that you are able to reduce energy and operating costs as well as save time and nerves with our technology. What advanced solution can we develop for you? www.wilo.com Wilo-EMU FA Wilo-EMU Megaprop Wilo-SCP Wilo-EMU KM

2147782/5T/1403/EN/FRO Pioneering for You WILO SE Nortkirchenstraße 100 D-44263 Dortmund Germany T +49 231 4102-0 F +49 231 4102-7363 [email protected] www.wilo.com More contact details at www.wilo.com