AUTOMOTIVE_2016-10

polymer solutions for automotive| Thermoplastic Elastomers & Engineering Plastics for key automotive applications |



polymer solutions for automotive| Thermoplastic Elastomers & Engineering Plastics for key automotive applications |pag. 2 About uspag. 3 Our added value step by steppag. 4 Exteriorpag. 8 Under the hoodpag. 12 Interiorpag. 18 Lightingpag. 22 DashboardAll the figures reported in this publication are the result of tests and analyses carried out in our laboratoriesand are believed to be accurate and reliable. Tests are performed at 23 °C unless otherwise specified.Data may be subject to revision and are provided for general guidance only. The user is responsiblefor carrying out all the tests necessary to verify the suitability of the material for the specific application.SO.F.TER. makes no warranties and assumes no liability in connection with any use of this information.

about usWorldwide Overall Quality Comprehensive Productspresence capacity standard product range and brands3 plants in Europe 55 production lines Quality systems 18 basic resins Thermoplastic3 plants in Americas 200,000 tpa certified by DNV, 60,000 formulations Elastomers:Sales in 60 countries 500 employees standardised procedures 6,500 products currently produced Pibiflex® (TPC) Forprene® (TPV) manufacturing Laprene® (TPE-S) sales office Sofprene® (TPE-S) Forflex® (TPO)europe Sofpur® (TPU) Forlì, IT, HQ Stablend (TPU/GF) Ferrara, IT Mantova, IT Engineering Plastics: Stuttgart, DE Tecnoprene® (PP/GF) Polifor® (PP)Americas Carboprene® (PP/CA) Nashville, TN, US Talcoprene® (PP/T) Léon, México Nylfor® (PA6/PA66) Campo Bom, Brasil Nivionplast® (PA6, PA66) Pibifor® (PBT) Pibiter® (PBT) Abistir® (ABS) Retelan® (ABS) Blendfor® (PC/ABS) Reblend® (PC/ABS) Stirofor® (HI-PS) Cabofor® (PC) Norfor® (PPE) Sanfor® (SAN) 2

our added value step by step ACCELERATING TIME-TO-MARKET: tHE ENGINEERING SERVICE Thanks to a suite of sophisticated software including Moldflow, 3D Modeling, FEM TAKING UP CHALLENGES by leveraging innovation and expertise (Finite Element Modeling) and ANSYS our Engineering Service carries out analyses In the latest years SO.F.TER. has tackled many projects of great interest and impor- and simulations that allow: tance for the manufacturing industry and has succeeded in delivering its customers - to analyse the behavior of the material flow inside the mould and to identify the brilliant solutions regarding issues like cost reduction, performance improvement, technological innovation, metal replacement, weight reduction, search for su- most appropriate and efficient position of injection points. This enables to obtain stainable materials, 2K solutions. a highly efficient moulding process, with reduced energy consumption and low risk of defective pieces. Well begun is half done:the choice of the right material - to simulate the behavior of the finished object in its real-life operational condi- SO.F.TER.’s strength stands in its comprehensive product portfolio, which includes as tions (stress analysis) and show any weak points in advance, thus allowing the cu- many as 18 basic resins, ranging from thermoplastic elastomers, to thermopla- stomer to take preventive action. stic vulcanizates, to engineering plastics for a total of 60,000 different formula- Our Engineering Service allows to shorten the time-to-market and to save time and tions and 6,500 products currently in production. By sharing the customer’s objecti- money, allowing customers to transform their new idea into a market success in a ves and analysing his requests we can support him in the choice of the material that fast and secure way. best suits his application needs and his price/performance goals. REDUCING PROJECT COMPLEXITY: ONE TO ONE APPROACH: CUSTOMISATION OF MATERIAL PROPERTIES one single partner for hard/soft systems When standard compounds do not match the customer’s requirements, we can de- Co-moulding of rigid plastics and soft elastomers, also known as 2K moulding, velop tailor-made formulations that achieve the required mix of properties and price is often used to achieve the integration of 2 or more components in a single level.This process involves our R&D department which, starting from several working piece and leads to a significant reduction of costs and production times. Thanks hypotheses, develops a sample material through various lab tests and trials.The pro- to its experience in the production, use and integration of engineering plastics cess continues with the moulding trials carried out with the assistance of our tech- and elastomers, SO.F.TER. can provide specialist advice regarding this techno- nical service, up to customer approval. logy and can help customers to reduce the complexity of projects and the num- ber of interlocutors. GLOBAL PRESENCE: the same product, everywhere SO.F.TER. is a truly global partner, capable of delivering the same product, with the 3 same qualitative standards, everywhere in the world. Our worldwide partner for the certification of the group companies is DNV, a leading certification body globally re- cognized for its high professional standards.

exterior Antenna bezel Co-extruded window Arm of rear wiper 12E sealing systems, Roof frame profile 14P with injected cornes 11E ETP Engineering Thermoplastics Roof water drain Encapsulated TPE Thermoplastic Elastomers Wiper blade Windshield seal 5E 13E third and quarter light seals 10E 7E 9E End cap Cowl vent grille 5P of wiper blade 15P Cowl vent grille seal 6EFront grille 4P 1P Front & rear bumper 13P 7P 3E 4E Mudguard Mud flaps Mud guards Bumperand license plate 2P 12P 6P Wheel cover support Side Lock mouldings internal 1P 2E 6E 1E 11P support 15E 14E 8EFront & rear Front bumper Side blinker Door profile Rearview Fuel-line Tank antivibration bumper deflector gasket mirror cover Inner belt protection mounts line seal 10P 8P 9P 16P 3P 4 Engine Arch wheel Mudguard Rocker Side moulding coupled undercover grids panel with aluminium

ETP Engineering ThermoplasticsEXTERIOR - Chart ref. 1P 2P 3P 4P 5P 6P 7PApplication Side moulding Front grille Cowl vent grille Wheel cover Mudguard Front and rear Side mouldingProcessing technology bumper coupled with Injection Injection aluminium mould. mould.Material Reference Injection Injection Injection PIBITER Injection Injection Injection Injection Injection POLIFOR mould. mould. mould. Injection E HI D4011 mould. mould. mould. mould. mould. C8Description mould. PP copolymer POLIFOR POLIFOR POLIFOR POLIFOR POLIFOR NYLFOR NYLFOR POLIFORPhysical properties E 12 TR/10 E 16 TR/10 E 12 TR/20 BLENDFOR 20 T/20 UV2 C 20 TR/30 UV R66 CM/15 R6 CA/20 E 10 CA/37 0.91density 23°C A4000 GF/20 E8 UV E3 EV 1.3-1.7linear mould shrinkage Elastomer 8.0MFI melt flow index Elastomer Elastomer Elastomer PC/ABS PET/PC PP PP copolymer, Polyamide 66, Polyamide 6, modified PP, -water absorption modified PP modified PP modified PP blend, 20% alloy, impact homopolymer, 30% mineral 30% mineralat saturation copolymer, 10% copolymer, copolymer, glass fiber modified 20% mineral filled, UV 15% mineral 20% calcium filled 24Mechanical properties mineral filled 10% mineral 20% mineral reinforced filled, high stabilized >50tensile strength at yield filled filled UV stability filled, impact carbonate, 1250elongation at break 8flexural modulus 1.02 modified, elastomernotched IZOD 23°C 72Thermal properties 1.3-1.6 heat stabilized modified 55VICAT B (50°C/h - 50 N)HDT 1.820 MPa method unit 10.0 HBFlame resistance HBflame resistance 1.6 mm ASTM D 1505 g/cm3 0.97 0.96 1.21 1.20 1.06 1.13 1.22 1.26 1.22flame resistance 3.2 mm ASTM D 955 % 0.9-1.3 0.7-1.1 0.1-0.4 0.5-0.8 0.9-1.3 0.8-1.0 - - 0.9-1.3 ASTM D 1238 g/10' 16.0 18.0 8.0 25.0 20.0 12.0 - - 7.0 - %- -- ---- - - 0.01 ASTM D 638 MPa 18 18 8 72 50 28 20 60 45 13 ASTM D 638 % >100 >100 >600 >1.5 >50 >10 >20 20 >100 ASTM D 790 MPa 1300 1050 200 4200 2200 2100 2400 2550 2500 1300 ASTM D 256 J/m 390 300 NB 70 700 25 95 80 65 170 ASTM D 1525 °C 51 52 106 115 120 96 60 - - 55 ASTM D 648 °C 52 - 45 - 111 - 64 - - 50 UL 94 Class HB HB HB HB - HB HB - - HB UL 94 Class HB HB HB HB - HB HB - - HB 5exterior

ETP Engineering ThermoplasticsEXTERIOR - Chart ref. 8P 9P 10P 11P 12P 13P 14P 15P 16PApplication Arch wheel Lock internal support Arm of rear Mudguard Engine Rearview Bumper wiper End cap of front Rocker panelProcessing technology grid undercover mirror cover and license wiper bladeMaterial Reference plate support Injection Injection Injection Injection Injection Injection Injection Injection Injection mould. Injection mould.Description mould. mould. mould. mould. mould. mould. mould. Injection PIBITER mould. mould. NRV 30 LU POLIFORPhysical properties POLIFOR POLIFOR POLIFOR POLIFOR NYLFOR TECNOPRENE POLIFOR TECNOPRENE E 30 TR/20 UVdensity 23°C E 12 H UV E 30 TR/20 L6 GF/20 E 12 TR/10Y1 B1 GFB/1020 FK7HCR L6 GF/30 X2 POLIFOR PBT/PET, 30% 3K4ELU1 EL1linear mould shrinkage Y1 EL1 UV X2 E 15 TR/10 H glass fiberMFI melt flow index PP Elastomer High PP UV2 reinforced, Elastomer Elastomerwater absorption Impact Elastomer homopolymer, modified PP, Low viscosity UV stabilized modified PP modified PPat saturation modified PP modified PP 20% 10% mineral PA6, reinforced cristallinity PP, homopolymer, Elastomer copolymer, copolymer,Mechanical properties copolymer, copolymer, chemically filled with 10% modified PP, 20% chemically 20% mineraltensile strength at yield UV and heat 20% mineral bonded glass glass fiber 35% chemically 30% 10% mineral bonded glass fiber, filled,elongation at break stabilized filled, UV fiber and 20% glass filled, heat UV stabilized UV stabilizedflexural modulus stabilized microspheres bonded glass chemically and UVnotched IZOD 23°C stabilized fiber, copper bonded glass stabilised fiber method unit 1.04 1.05 0.95 1.36 1.18 1.13 0.96 1.53 1.04 1.04 ASTM D 1505 g/cm3 0.90 0.6-1.0 0.2-0.6 0.4-0.8 0.1-0.3 0.1-0.5 0.9-1.3 0.4 0.15-0.50 0.4-0.8 30.0 4.0 12.0 - 5.0 6.0 12.0 20.0 2.0 22.0 ASTM D 955 % - - - 6.50 0.02 - - 0.04 0.02 - ASTM D 1238 g/10' 12.0 - %- - ASTM D 638 MPa 18 18 75 13 112 - 82 18 - - 18 >40 >2 >100 >3 - 3 >60 2 - >30 ASTM D 638 % >200 1350 4200 370 5000 8100 5500 1320 9200 2900 1750 300 85 400 5.5 120 75 400 65 22 460 ASTM D 790 MPa - ASTM D 256 J/m -Thermal properties ASTM D 1525 °C 43 - 130 88 - 140 133 52 215 74 48VICAT B (50°C/h - 50 N) 200 195 119 50HDT 1.820 MPa ASTM D 648 °C - 102 134 - 152 - 49Flame resistanceflame resistance 1.6 mm UL 94 Class HB HB HB HB HB - HB HB - - HB HB HB HB - HB -flame resistance 3.2 mm UL 94 Class HB HB HB HB HB 6

TPE Thermoplastic ElastomersEXTERIOR - Chart ref. 1E 2E 3E 4E 5E 6E 7EApplication Door profile Front bumper deflector Mud flap Mudguard Co-extruded window sealing system Cowl vent Windshield Injection with injected cornes grille seal seal mould.Processing technology Injection mould. Injection mould. Injection Co-extrusion FORPRENE 6NE.901.A55 Overmoulding Extrusion mould. TPV FORPRENE 6NE.901.A85 FORPRENE FORPRENE 6NM.901.A65Description TPV TPV TPO 6NM.A90 TPV TPVMaterial Reference FORPRENE FORPRENE FORPRENE FORPRENE FORPRENE FORPRENE FORPRENE FORFLEX TPV FORPRENE FORPRENE 6NM.A75 6NM.A80 6NM.A85 6NM.A90 6NM.A75 6NM.A80 6NM.A85 71K.A90 6NM.A45 6NE.A75 FORPRENE FORPRENE FORPRENE 6NE.A55 6NE.A85 6NM.A65Properties method unithardness (*) ASTM D2240 Shore A 77 A 82 A 86 A 91 A 77 A 82 A 86 D40 A 91 A 57 A 87 A 67 A 47 A 76 0.96 0.96 0.95 0.88 0.96density ASTM D792 g/cm3 0.96 0.96 0.95 0.96 6.8 8.5 9.4 10.7 0.96 0.96 0.95 0.96 0.95 7.4 540 580 600 650 560tensile strenght ASTM D412-C MPa 6.8 8.5 9.4 12.0 3.0 3.6 3.9 - 12.0 4.8 10.5 6.0 3.7 2.8 32 38 45 - 33elongation at break ASTM D412-C % 540 580 600 600 38 40 45 - 600 550 600 500 500 39modulus 100% ASTM D412-C MPa 3.0 3.6 3.9 5.2 5.2 1.6 4.2 2.2 1.3tear strength ASTM D 624-C N/mm 32 38 45 50 50 23 43 26 17compression set ASTM D 395-B % 38 40 45 48 48 37 44 33 36(*) Hardness 15 sec = Pibiflex (TPC) / Forprene (TPV) / Forflex (TPO) - Hardness 3 sec = Laprene (TPE-S)EXTERIOR - Chart ref. 8E 9E 10E 11E 12E 13E 14E 15EApplication Third and quarter light seal Wiper blade Roof water Inner belt Roof frame Antenna drain Tank Fuel-line line seal profile bezel antivibration protection Injection mounts mould.Processing technology FORPRENE 6NE.A60 Glass Injection Injection FORPRENE 6K5.901.A60 FORPRENE Extrusion Injection Injection ExtrusionDescription co-extruded mould. co-extruded with 6NE.901.A75 TPV mould. mould. with FORPRENE Encapsulation mould. FORPRENE 6E5.901.D40 co-extruded 6NE.A90 TPE-S with PP TPE-S TPV TPV TPV TPV TPV TPV TPV TPV TPV FORPRENE FORPRENE FORPRENE 6NM.A70 6NM.A85 6E1.A85Material Reference FORPRENE FORPRENE FORPRENE FORPRENE LAPRENE FORPRENE FORPRENE FORPRENE FORPRENE LAPRENE 6NE.A60 6NE.A90 665.M99.A60 6NM.919.A60 83GE9ZA60 6K5.A60 6E5.D40 6NE.901.A75 6K5.901.A75 830.823 co-extruded VS2 with PPProperties method unit A 61 A 92 A 62 A 62 A 63 (*) A 62 A 42 A 76 A 76 A 87 (*) A 72 A 86 A 87hardness (*) ASTM D2240 Shore 0.95 0.96 0.94 0.96 0.98 0.98 0.96 0.96 0.98 1.18 0.96 0.95 1.25density ASTM D792 g/cm3 4.6 11.8 5.5 4.6 8.5 5.5 16.5 7.4 7.5 11.8 6.5 9.4 6.8tensile strenght ASTM D412-C MPa 560 620 520 480 800 480 630 560 530 680 520 600 510elongation at break ASTM D412-C % 1.8 5.1 2 1.9 1.6 2.1 8.7 2.8 3.1 3.4 2.6 3.9 3.4modulus 100% ASTM D412-C MPa 24 56 22 21 25 23 69 33 31 41 29 45 30tear strength ASTM D 624-C N/mm 38 49 40 37 50 37 - 39 43 54 36 45 49compression set ASTM D 395-B %(*) Hardness 15 sec = Pibiflex (TPC) / Forprene (TPV) / Forflex (TPO) - Hardness 3 sec = Laprene (TPE-S) 7

under the hood Air filter box Air intake Electronic system Bonnet lock Cable collars Air ducts Cable clip Electric cable manifold housing housing 21E conduit 34P 31P gasket 32E 24P 23P 20P ETP Engineering Thermoplastics 20E Clean TPE Thermoplastic Elastomers Various grids, air duct 30E Washing system frames & holders pipes Liquid tank 23E 21P 27P Liquid tank cap 22P Gasket for Engine cover 22E Air ductradiator head 29P 27E Pipe grommet Various engine 26E 28P covers & housings 31E Firewall grommet 25E Core hitch 25P 24E 29E Cooling fan grid Dirty air duct Suspension bellow 27P 26P 32P 28E 30P 33E 34E 8 Cooling system fan Air Duct CVJ boots Various under hood Condensate Fuses and Trilobic holders drain relays casing adaptor

ETP Engineering ThermoplasticsUNDER-HOOD - Chart ref. 20P 21P 22P 23P 24P 25P 26P 27P 28PApplication Electric cable conduit Liquid tank Liquid tank Air ducts Electronic Cooling fan grid Under the hood grids, Cooling system fan Various engineProcessing technology cap housing system frames and holders covers andMaterial Reference housing housingsDescription Extrusion Extrusion Injection Injection Injection Injection Injection Injection Injection Injection Injection mould. mould. mould. mould. mould. mould. mould. mould. mould. POLIFOR POLIFOR TECNOPRENE POLIFOR POLIFOR POLIFOR POLIFOR POLIFOR NYLFOR TECNOPRENE NYLFOR E 1 Y2 E 1 V2 T60K4 L6 GF/30 15 TC/40 X2 15 T/20 X1 HR L6 GF/30 X2 2 TR/40 A1 GF/30 AK6HI B2 K/30 Elastomer Elastomer PP homopolymer, PP PP PP PP homopolymer, PP Low viscosity PP homopolymer, Polyamide 6, modified PP, 30% mineral extrusion modified PP, 20% chemically homopolymer, homopolymer, homopolymer, 30% chemically homopolymer, PA 6.6, 30% 30% chemically filled, heat grade stabilized flame retarded bonded glass fiber, 30% 40% mineral 20% mineral bonded glass fiber, 40% mineral glass fiber bonded glass fiber, UL94 V2 class, high transparency, chemically filled filled, heat and heat stabilized filled reinforced, high mechanical extrusion water and glycol bonded glass metal contact heat stabilized strength, heat grade stabilized fiber stabilized stabilizedPhysical properties method unit 0.92 1.04 1.13 1.27 1.07 1.13 1.24 1.36 1.13 1.36density 23°C ASTM D 1505 g/cm3 0.90 1.3-1.7 0.7 0.2-0.4 0.8-1.2 0.8-1.2 0.1-0.5 0.5-0.9 0.3-0.7 0.5 0.8-1.2 ASTM D 955 % 1.2-1.6 1.5 1.0 2.5 12.0 10.0 6.0 2.5 - 2.8 -mould shrinkage ASTM D 1238 g/10' 1.0 - 0.02 - - - - - 5.50 0.02 6.50MFI melt flow index %-water absorptionat saturationMechanical propertiestensile yield strength ASTM D 638 MPa 23 23 - 90 26 30 82 30 165 145 75 >100 - >2 7 35 3 >5 >2 - 7.00elongation at break ASTM D 638 % >100 800 4100 5500 3000 2100 5500 3650 8000 6400 4300flexural modulus ASTM D 790 MPa 800 550 150 100 25 30 75 25 75 145 60notched IZOD 23°C ASTM D 256 J/m no breakThermal properties ASTM D 1525 °C 55 58 125 135 95 95 133 105 - 138 - ASTM D 648 °C - - 140 148 - - - 82 250 151 -VICAT B(50°C/h - 50 N)HDT 1.820 MPaFlame resistance UL 94 Class HB V2 HB HB HB HB HB HB HB - HB UL 94 Class HB V2 - HB HB HB HB HB HB HB HBflame resistance1.6 mmflame resistance3.2 mm UL 94 approved 9 under the hood

ETP Engineering ThermoplasticsUNDER-HOOD - Chart ref. 29P 30P 31P 32P 33P 34PApplication Engine cover Air intake manifold Air duct Cooling system frame Air filter boxProcessing technology Fuses andMaterial Reference Injection relays case Injection Injection Blow Blow Blow Injection Injection Injection Injection mould. mould. mould. mould. mould. mould. mould. mould. mould. mould.Description NYLFOR Injection A2 MF/25 H1 mould. TECNOPRENE NIVIONPLAST TECNOPRENE TECNOPRENE PIBITER TECNOPRENE NYLFOR TALCOPRENE TECNOPRENE AK7HCT B R356G T60VB4 3T60VB4 BM521 AK6HI A2 GF/30 1522SMT VK6HIT1 POLIFOR H2 W QD 813 Y001 Polyamide PP copolymer, High Polyamide 6, PP, 20% PP copolymer, 20% PBT, high PP homopolymer, PA 66, 30% PP 20% PP homopolymer, 66/6, 25% 30% cristallinity 35% glass fiber chemically chemically bonded viscosity 30% chemically mineral filled, glass fiber PP, 35% reinforced, heat bonded glass glass fiber, high 30% chemically glass fiber mineral bonded glass fiber, heat stabilized reinforced, UL chemically stabilized fiber, high viscosity, smooth high flowability, bonded glass viscosity, good blowing surface, good bonded glass reinforced, heat filled, good high mechanical V0 rated fiber, heat thermal ageing mechanical strength, strength, heat stabilized and mechanical heat stabilized fiber, high and hydrolysis mechanical stabilized properties mechanical stabilized properties, strength, heat high thermal stabilized stabilizationPhysical properties method unit 1.46 1.18 1.40 1.04 1.02 1.24 1.13 1.37 1.06 1.15density 23°C ASTM D 1505 g/cm3 1.32 0.1-0.5 0.1-0.3 0.25-0.35 0.2-0.6 0.2-0.6 - 0.5 0.4-0.8 1.1-1.5 0.1-0.3 ASTM D 955 % 0.9-1.13 3.0 1.0 - 1.5 1.0 2.0 2.8 - 15.0 13.0mould shrinkage ASTM D 1238 g/10' - - 0.02 5.50 0.02 6.50 0.02 0.02 - 0.05 0.02MFI melt flow index % 6.00 62 - 157water absorption >2 - >2.5at saturation 5100 6400 7500 70 145 7Mechanical properties 120 138 245tensile yield strength ASTM D 638 MPa 802 - - - - - 36 151 242 - - - 3.2 - - 180 15 -elongation at break ASTM D 638 % >4 V0 8600 10500 4000 3300 1700 - HB 2250 6400 5VA 140 130 140 180 1000 HB HB 3.3 120flexural modulus ASTM D 790 MPa 4500notched IZOD 23°C ASTM D 256 J/m 40Thermal properties ASTM D 1525 °C - 139 - 114 - - 90 137 ASTM D 648 °C 76 151 210 138 131 - 65 148VICAT B(50°C/h - 50 N)HDT 1.820 MPaFlame resistance UL 94 Class HB -- -- - -- UL 94 Class HB HB HB HB HB - HB HBflame resistance1.6 mmflame resistance3.2 mm UL 94 approved 10

TPE Thermoplastic ElastomersUNDER-HOOD - Chart ref. 20E 21E 22E 23E 24E 25E 26EApplication Bonnet lock gasket Cable clip Air duct Clean air duct Dirty air duct Core hitch Gasket for radiator headProcessing technology Injection mould. Injection mould. Blow mould. FORPRENE TPC Blow mould. Blow mould. Injection mould. Injection mould.Description TPV TPV TPV 6NB.D40 PIBIFLEX TPV TPV TPVMaterial reference FORPRENE FORPRENE FORPRENE B50518T2 FORPRENE FORPRENE FORPRENE 6NM. TPV 6NM.A65 6NM.A65 6NB.A90 D 40 6NB.A90 6NB.D40 A55 0.94 D48 FORPRENE 18.0 1.18 A 92 D 40 6EK.A60 670 30.0 0.94 0.94Properties Method Unit 8.2 350 15.8 18.0hardness (*) 75.0 - 650 670density ASTM D2240 Shore A 67 A 67 A 92 - - 6.4 8.2 A 57 A 62tensile strenght 0.96 0.94 - 60.0 75.0 0.95 0.99elongation at break ASTM D792 g/cm3 0.96 6.0 15.8 47 - 4.3 5.1modulus 100% 500 650 480 480tear strength ASTM D412-C MPa 6.0 2.2 6.4 1.6 1.9compression set 26 60.0 20 23.0 ASTM D412-C % 500 33 47 32 37 ASTM D412-C MPa 2.2 ASTM D 624-C N/ 26 mm 33 ASTM D 395-B %(*) Hardness 15 sec = Pibiflex (TPC) / Forprene (TPV) / Forflex (TPO) - Hardness 3 sec = Laprene (TPE-S)UNDER-HOOD - Chart ref. 27E 28E 29E 30E 31E 32E 33E 34EApplication Pipe grommet Condensate drain Suspension bellow Washing system Firewall grommet Cable collars CVJ Boots Trilobic adaptor pipesProcessing technology Injection mould. Injection mould. Blow mould. Extrusion Injection mould. Injection mould. Blow mould. Injection mould.Description TPE-S TPV TPV TPV TPV TPC TPC TPC high modulus,Material reference LAPRENE FORPRENE FORPRENE FORPRENE FORPRENE high flow properties PIBIFLEX PIBIFLEX 83CS9Z555 6NM.A70 6NB.A90 6NE.A75 6NM.D40 B5050 MWR 4054 IM PIBIFLEX A 76 L6060 D41 0.96 1.14Properties Method Unit 7.4 33.0hardness (*) 560 600density ASTM D2240 Shore A 44 A 72 A 92 2.8 D 41 D60 D 41 -tensile strenght 0.96 0.94 33 98elongation at break ASTM D792 g/cm3 1.16 6.5 15.8 39 0.95 1.22 1.14 -modulus 100% 520 650tear strength ASTM D412-C MPa 6.0 2.6 6.4 17.0 34.0 30.0compression set 29 60.0 ASTM D412-C % 850 36 47 630 600 460 ASTM D412-C MPa 1.0 8.1 - - ASTM D 624-C N/mm 20 65 - - ASTM D 395-B % 42 61 - -(*) Hardness 15 sec = Pibiflex (TPC) / Forprene (TPV) / Forflex (TPO) - Hardness 3 sec = Laprene (TPE-S) 11

interior Internal roof Steering Instrument Electric ignition Flapper Heating system 45P column cover panel cover door seal components Glove Hand grip Instrument button 56P compartment ETP Engineering Thermoplastics 41E Pillar 43P 60P 50E 55P TPE Thermoplastic Elastomers 47P Fuse holder panel frame 45E Mat for 43E glove box Sunshade 50P Pedal 61P frames Flapper 52P Wheel cover 50E door seal coating 44E CD player Air outlet frame Scratch resistant Speaker grid 46E 59P door handle 42P 49PRear shelf 46P 40E 42E Door cup Bellow for 41P core hitch 40P Seat Door panel shell & pocket 51E 49E 54P 48E 44P Door bottom profileTrunk mat Air outlet Clutch Handle soft-touch 12 51P support finishing Boot liner 57P 58P 53P 63P 62P 47E 48P Clutch pedal Kick plate Mats Central console Armrest tray, Ashtray trim Seat belts shell cupholder & components & components

ETP Engineering ThermoplasticsINTERIOR - Chart ref. 40P 41P 42P 43P 44P 45PApplication Seat shell Speaker grid Steering column cover Air outlet Internal roof Door panel &Processing technology pocket Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould.Material Reference Injection mould. POLIFOR POLIFOR POLIFOR ABISTIR POLIFOR POLIFOR POLIFOR POLIFORDescription C 20 TR/25 C 12 HC C 30 MR GF/17 E 12 SR/10 UV E 16 TR/15 X2 25 HC E 12 TR/10 POLIFORPhysical properties 3 PP copolymer, PP copolymer, PP copolymer ABS, 17% glass PP elastomer modified, PP elastomer PP homopolymer, PP elastomerdensity 23°C 25% mineral high fiber reinforced 10% mineral filled, modified, 15% high cristallinity modified, 10%mould shrinkage PP filled cristallinity scratch resistant, mineral filled mineral filledMFI melt flow index homopolymer UV stabilizedwater absorption atsaturation Method Unit 1.09 0.90 0.91 1.16 0.98 1.01 0.90 0.98Mechanical properties ASTM D 1505 g/cm3 0.91 0.8-1.2 1.1-1.8 1.1-1.9 0.1-0.9 0.7-1.1 1.1-1.5 1.2-1.6 0.8-1.2tensile yield strength ASTM D 955 % 1.6-2.0 22.0 12.0 25.0 8.0 10.0 12.0 22.0 12.0elongation at break ASTM D 1238 g/10' 5.0flexural modulusnotched IZOD 23°C %Thermal properties ASTM D 638 MPa 33 24 26 25 65 22 18 37 19VICAT B (50°C/h - 50 N) ASTM D 638 % 150 >20 >30 >2 >40 >100 >5 >100HDT 1.820 MPa ASTM D 790 MPa 1450 2300 1350 1200 5000 1680 1200 1900 1100 80 no 25 300Flame resistance ASTM D 256 J/m 45 46 70 65 185 breakflame resistance 1.6 mm 110 50flame resistance 3.2 mm ASTM D 1525 °C 93 72 70 72 102 55 55 - - ASTM D 648 °C - - 62 54 - - 53 HB HB HB HB HB UL 94 Class HB HB HB HB HB HB HB UL 94 Class HB HB HB HB HB HB 13 interior

ETP Engineering ThermoplasticsINTERIOR - Chart ref. 46P 47P 48P 49P 50P 51PApplication Rear shelf Fuse holder Boot liner Pillar Central console ScratchProcessing technology resistant door Injection Injection Injection Injection Injection Injection Injection Injection Injection Injection handle mould. mould.Material Reference mould. mould. mould. mould. mould. mould. mould. mould. PIBITER POLIFOR Injection NRV15S1 C 12 HCDescription POLIFOR POLIFOR POLIFOR POLIFOR POLIFOR POLIFOR POLIFOR POLIFOR mould. PBT/ASA PP copolymer, E 12 SR/10 UV E 16 TR/15 X2 C 20 TR/25 E 16 TR/10 UV 12 TR/20 UV E 12 TR/10 UV 12 TR/20 UV C 20 TR/25 alloy 14% highPhysical properties POLIFOR glass fiber cristallinitydensity 23°C PP elastomer PP elastomer PP copolymer, Elastomer PP Elastomer PP PP copolymer, C 10 TR/20 SR reinforcedmould shrinkage modified, 10% modified, 15% 25% mineral 0.90MFI melt flow index mineral filled, mineral filled filled modified PP homopolymer, modified PP homopolymer, 25% mineral PP copolymer, 1.1-1.8water absorption scratch resistant, 20% mineral 12.0at saturation UV stabilized copolymer, 10% 20% mineral copolymer, 10% 20% mineral filled filled, scratch -Mechanical properties resistanttensile yield strength mineral filled, filled mineral filled, filled, UV 26elongation at break >30flexural modulus UV stabilized UV stabilized stabilized 1350notched IZOD 23°C 70 Method Unit 1.01 1.09 0.98 1.06 0.97 1.07 1.09 1.02 1.37Thermal properties ASTM D 1505 g/cm3 0.98 1.1-1.5 0.8-1.2 0.9-1.3 1.0-1.5 0.9-1.3 1.0-1.4 0.8-1.2 - - 70VICAT B (50°C/h - 50 N) ASTM D 955 % 0.7-1.1 12.0 22.0 9.0 10.0 16.0 10.0 22.0 8.0 17.0 54HDT 1.820 MPa ASTM D 1238 g/10' 10.0Flame resistance HBflame resistance 1.6 mm %- -- - -- -- - - HBflame resistance 3.2 mm ASTM D 638 MPa 22 18 24 19 30 18 30 24 18 - ASTM D 638 % >40 >100 >20 >100 20 >100 >10 >20 >50 3.2 ASTM D 790 MPa 1680 1200 2300 1200 2600 1300 2600 2300 1800 5500 no 46 300 28 390 28 46 180 70 ASTM D 256 J/m 185 break 72 62 98 51 100 72 60 - ASTM D 1525 °C 55 55 62 55 - 52 - 62 58 170 ASTM D 648 °C 53 - HB HB HB HB HB HB HB - UL 94 Class HB HB HB HB HB HB HB HB HB HB UL 94 Class HB HB 14

ETP Engineering ThermoplasticsINTERIOR - Chart ref. 52P 53P 54P 55P 56P 57PApplication Clutch pedal Clutch Support Armrest tray, Sunshade Glove Heating cupholderProcessing technology frames Injection mould. compartment, system InjectionMaterial Reference POLIFOR mould. L10 GF/30 H1 X2 internal components POLIFORDescription C 20 TR/25 Injection Injection Injection Injection Injection Injection Injection Injection InjectionPhysical properties mould. mould. mould. mould. mould. mould. mould. mould. mould.density 23°C NYLFORmould shrinkage POLIFOR TECNOPRENE NYLFOR POLIFOR POLIFOR POLIFOR NYLFOR NYLFOR B2 GF/15MFI melt flow index E 12 TR/10 HK6 B1 GF/30 H1N C 20 TR/25 C 30 TR/20 H E 8 TR/30 A2 GF/50 B2water absorption UV Polyamide 6,at saturation 15% glassMechanical properties PP elastomer PP homopolymer, Low viscosity PP homopolymer, PP copolymer, PP copolymer, PP copolymer, PP elastomer Polyamide 66, Polyamide fibertensile yield strength modified, 10% 30% chemically PA6, 30% glass 30% chemically 25% mineral 20% mineral 50% glass 6, standard reinforcedelongation at break mineral filled bonded glass fiber reinforced, bonded glass fiber, filled filled, heat 25% mineral modified, fiber viscosityflexural modulus heat stabilized stabilized reinforced 1.22notched IZOD 23°C fiber high flowability filled 30% mineral 0.3-0.7 -Thermal properties filledVICAT B (50°C/h - 50 N) -HDT 1.820 MPa Method Unit 1.13 1.36 1.15 1.09 1.05 1.09 1.12 1.55 1.14 ASTM D 1505 g/cm3 0.97 0.5 0.3-0.7 0.2-0.6 0.8-1.2 1.0-1.3 0.8-1.2 0.7-1.1 0.1-0.5 1.0-1.4Flame resistance ASTM D 955 % 0.9-1.3 7.0 - - 22.0 28.0 22.0 7.0 - -flame resistance 1.6 mm ASTM D 1238 g/10' 16.0flame resistance 3.2 mm %- 0.02 6.50 - - - - - 4.50 - ASTM D 638 MPa 18 - 160 75 24 25 24 22 220 78 115 ASTM D 638 % >100 - >2.5 >3 >20 25 >20 >30 >2 >100 >4 ASTM D 790 MPa 1300 6300 8200 5200 2300 2300 2300 1800 14000 2500 4400 ASTM D 256 J/m 390 120 10 9 46 50 46 120 140 50 50 ASTM D 1525 °C 51 137 - 127 72 70 72 58 - - - ASTM D 648 °C 52 150 204 145 62 - 62 - 250 72 180 UL 94 Class HB HB HB HB HB HB HB HB HB HB HB UL 94 Class HB - HB HB HB HB HB HB HB HB HB 15

ETP Engineering ThermoplasticsINTERIOR - Chart ref. 58P 59P 60P 61P 62P 63PApplication Kick plate Ashtray trim CD player frame Instrument panel Instrument panel Seat belts shellProcessing technology & components cover frame & internal componentsMaterial Reference Injection Injection Injection Injection Injection Injection Injection Injection Injection mould. mould. mould. mould. mould. mould. mould. mould. mould.Description POLIFOR POLIFOR BLENDFOR POLIFOR TALCOPRENE ABISTIR ABISTIR POLIFOR POLIFORPhysical properties E 8 TR/30 E 8 TR/30 A 6000 E 16 TR/15 X2 1540TL1 MR TR 106 25 GFCF/20 C 12 HCdensity 23°Cmould shrinkage PP elastomer PP elastomer PC/ABS blend PP elastomer PP homopolymer, ABS, high impact ABS, antistatic, PP homopolymer, PP copolymer,MFI melt flow index modified, 30% modified, 30% modified, 15% 40% mineral filled resistance high heat 20% glass fiber and high cristallinitywater absorption mineral filled mineral filled mineral filled resistance carbon fiber reinforcedat saturation Method Unit 1.12 1.13 1.01 1.27 1.06 1.06 1.05 0.90Mechanical properties ASTM D 1505 g/cm3 1.12 0.7-1.1 0.4-0.6 1.1-1.5 0.8-1.2 0.4-0.8 0.4-0.6 0.1-0.5 1.1-1.8tensile yield strength ASTM D 955 % 0.7-1.1 7.0 18.0 12.0 15.0 20.0 9.0 8.0 12.0elongation at break ASTM D 1238 g/10' 7.0flexural modulus - - 0.05 - - - -notched IZOD 23°C %- -Thermal properties ASTM D 638 MPa 22 22 50 18 - 40 45 40 26VICAT B (50°C/h - 50 N) ASTM D 638 % >30 >30 > 50 >100 - >30 >30 5 >30HDT 1.820 MPa ASTM D 790 MPa 1800 1800 2300 1200 3900 2300 2300 3800 1350 ASTM D 256 J/m 120 120 500 no break 26 180 180 40 70Flame resistanceflame resistance 1.6 mm ASTM D 1525 °C 58 58 120 55 97 94 104 103 70flame resistance 3.2 mm ASTM D 648 °C - - - - 71 - - - 54 UL 94 Class HB HB HB HB - HB HB HB HB UL 94 Class HB HB HB HB HB HB HB HB HB 16

TPE Thermoplastic ElastomersINTERIOR - Chart ref. 40E 41E 42 43E 44E 45E 46E 47EApplication Bellow for core Hand grip Door cup Mat for glove box Pedal cover Push button for Steering wheel Mat hitch electric ignition coatingProcessing technology Blow mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Sheet ExtrusionDescription TPE-S TPC TPV TPV TPE-S TPOMaterial reference TPV LAPRENE PIBIFLEX FORPRENE FORPRENE TPV TPV LAPRENE FORFLEX 830.890 4484 6NM.A55 6NM.A70 830.863 71P.A75Properties FORPRENE FORPRENE FORPRENEhardness (*) 6B0.A68 6NM.A55 6NM.A75densitytensile strenght Method Unitelongation at breakmodulus 100% ASTM D2240 Shore A 68 A 66 D 52 A 57 A 72 A 57 A 77 A 69 A 77tear strength 0.94 1.20 0.95 0.96 0.95 0.96 0.99 1.09compression set ASTM D792 g/cm3 0.93 5.0 27.0 4.3 6.5 4.3 6.8 5.8 3.6 540 600 520 ASTM D412-C MPa 6.5 3.0 2.0 2.4 32 28 30 ASTM D412-C % 680 530 500 480 520 480 38 55 - ASTM D412-C MPa 2.3 2.4 - 1.6 2.6 1.6 ASTM D 624-C N/ 33 35 - 20 29 20 mm 48 ASTM D 395-B % - - 32 36 32INTERIOR - Chart ref. 48E 49E 50E 51EApplication Trunk mat Flapper door seal Door bottom profile Seat handleProcessing technology soft-touch finishing Injection mould. Injection mould. ExtrusionDescription Injection mould. TPV TPVMaterial reference FORPRENE TPV FORPRENE TPE-S 6NE.A85 6EK.A65Properties FORPRENE FORPRENE FORPRENE FORPRENE FORPRENEhardness (*) LAPRENE 6SD.A30 6NM.A35 6NM.A45 6EK.A70 6EK.A75density 830.890tensile strenghtelongation at break Method Unitmodulus 100%tear strength ASTM D2240 Shore A 66 A 87 A 28 A 37 A 47 A 67 A 72 A 77compression set 0.95 0.90 0.95 0.95 0.96 0.97 0.97 ASTM D792 g/cm3 0.94 10.5 2.0 3.0 3.7 6.1 7.1 7.6 600 420 460 500 450 530 530 ASTM D412-C MPa 5.0 4.2 0.6 0.9 1.3 2.2 2.7 3.2 43 10 14 17 25 30 35 ASTM D412-C % 530 44 25 32 36 38 38 41 ASTM D412-C MPa 2.4 ASTM D 624-C N/ 35 mm - ASTM D 395-B % 17

lighting Lamp housing Electric board support 81P 83P ETP Engineering Thermoplastics TPE Thermoplastic Elastomers Light gasket 81E Front light bezel 82P Head light cowling 80E 83P Electric board support 80P Front light housing 83P 84PElectric board support Third light cover 18

ETP Engineering ThermoplasticsLIGHTING - Chart ref. 80P 81P 82PApplication Front light housing Front light bezel Lamp housing (passenger compartment, third light) Injection mould. PIBITERProcessing technology Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. N80 LEMaterial Reference Unreinforced PBT, TECNOPRENE TECNOPRENE TALCOPRENE TALCOPRENE NYLFOR POLIFOR good thermalDescription FK6T1LE VKM24 340TL 1540 TLT1 FP63E15HB C 25 TR/25 UV stabilization, high fluidity, easy mould PP homopolymer, PP homopolymer, PP homopolymer, PP homopolymer, PA6 standard viscosity, PP copolymer, release, 30% chemically bonded 10% chemically bonded 40% talc, 40% mineral filled, 15% glass fibre 25 mineral filled, low emission glass fiber, heat stabilized, glass fibre, 20 talc filled, high thermal high flowability reinforced, UV stabilized low emission, high thermal heat stabilized, good resistance and thermal resistance, heat stabilized 1.31 resistance dimensional stability, low VOC and emission 1.8 high flowability 65.0 0.05Physical properties method unit 1.13 1.24 1.23 1.23 1.09 ASTM D 1505 g/cm3 1.13 0.6 0.8-1.2 0.7-1.2 0.3-0.9 0.8-1.2 53density 23°C ASTM D 955 % 1.0-0.3 15.0 4.5 13.0 20.0 20 ASTM D 1238 g/10' 2.5 0.05 0.05 8.00 - 2500mould shrinkage 0.02 40 % 0.02 30 30 126 26MFI melt flow index >3 >10 -water absorption 3800 3700 4500 2400 60at saturation 32 26 70 47 -Mechanical properties ASTM D 638 MPa - 58 95 - - 89 -tensile yield strength ASTM D 638 % - - 73 96 - 68elongation at break ASTM D 790 MPa 6200 4200flexural modulus ASTM D 256 J/m 130 60 - - HB HBnotched IZOD 23°C HB HB HB HBThermal properties ASTM D 1525 °C 134 -VICAT B (50°C/h - 50 N) ASTM D 648 °C 146 136HDT 1.820 MPaFlame resistance UL 94 Class - -flame resistance 1.6 mm UL 94 Class HB HBflame resistance 3.2 mm 19 lighting

ETP Engineering ThermoplasticsLIGHTING - Chart ref. 83P 84PApplicationProcessing technology Electric board support Third light coverMaterial Reference Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould. Injection mould.Description POLIFOR POLIFOR POLIFOR POLIFOR ABISTIR BLENDFOR POLIFOR POLIFOR POLIFOR POLIFOR 6 GF/30 12 CA/30 X1 10 T/40 X1 12 T/40 TR A8000 12 GB/20 20 TR/20 UV C 20 TR/20 C 25 TR/25 UV PP PP PP PP ABS, high heat PC/ABS alloy, PP PP PP PP homopolymer, homopolymer, homopolymer, homopolymer, resistance, excellent heat homopolymer, homopolymer, copolymer, copolymer, 30% glass fiber 30% mineral 40% mineral 40% talc high flowability resistance, 20% glass 20% mineral 20% mineral 25% mineral reinforced filled filled filled high flowability beads filled filled, UV filled filled, UV stabilized stabilizedPhysical properties method unit 1.15 1.24 1.26 1.05 1.15-1.19 1.03 1.06 1.05 1.09 ASTM D 1505 g/cm3 1.11 0.9-1.3 0.6-1.0 0.8-1.2 0.4-0.8 0.4-0.7 1.2-1.6 0.8-1.2 0.8-1.2 0.8-1.2density 23°C ASTM D 955 % 0.2-0.6 10.0 9.0 10.0 8.0 15.0 10.0 20.0 16.0 20.0 ASTM D 1238 g/10' 3.0mould shrinkage - - - - - - - - - %-MFI melt flow indexwater absorptionat saturationMechanical properties ASTM D 638 MPa 55 25 33 29 45 56 29 32 24 26tensile yield strength ASTM D 638 % >1 >20 >10 >5 >20 >50 >20 >10 40 >10elongation at break ASTM D 790 MPa 4800 2100 3300 3300 2600 2300 650 2400 2000 2400flexural modulus ASTM D 256 J/m 45 32 25 25 80 550 25 32 45 47notched IZOD 23°CThermal propertiesVICAT B (50°C/h - 50 N) ASTM D 1525 °C 110 97 100 102 105 130 95 90 72 89HDT 1.820 MPa ASTM D 648 °C - - 75 - 115 - - - - 68Flame resistanceflame resistance 1.6 mm UL 94 Class HB HB HB HB HB HB HB HB HB HB HB HB HB HB HB HBflame resistance 3.2 mm UL 94 Class HB HB HB HB 20

TPE Thermoplastic ElastomersLIGHTING - Chart ref. 80E 81EApplication Head-light cowlingProcessing technology Injection mould. Light gasketDescription TPV 2K Injection mould.Material reference FORPRENE 6NM.D40 TPE-S overmoulded onto transparent ABS LAPRENE 83K.999Properties Method Unithardness (*)density ASTM D2240 Shore D 41 A 77tensile strenght 1.05elongation at break ASTM D792 g/cm3 0.95 12.0modulus 100% 550tear strength ASTM D412-C MPa 17.0 2.8compression set 53 ASTM D412-C % 630 12 ASTM D412-C MPa 8.1 ASTM D624-C N/mm 65 ASTM D 395-B % 61(*) Hardness 15 sec = Pibiflex (TPC) / Forprene (TPV) / Forflex (TPO) - Hardness 3 sec = Laprene (TPE-S) 21

dashboard 22

Dashboard and interior soft panels in a single stepThe “Total Dashboard” concept.Traditionally, the production of soft panels involves the separate moulding of the single components (rigid carrier,soft top layer or skin) and their subsequent assembly.With the “Total Dashboard Concept” SO.F.TER. aims to offer new solutions for the production of bi-material panelsin a single step: both Dolphin and SmarTouch 2K, the two systems dedicated to this application, allow to achievesignificant benefits by simplifying the logistic and manufacturing cycle.The panels obtained by these technologies are totally recyclable, thanks to the chemical affinity of the materials usedfor the rigid and soft part, thus allowing for the recovery of production scraps and end-of-life parts.The granulate resulting from grinding has a good stiffness, high dimensional stability, excellent shock resistanceat low temperatures, and can be reused in various applications. 23 dashboard

DOLPHINProduction of automotive soft-skin panels in a single phaseDolphin is an innovative technology that enables the production of soft-touch dashboard and interior panelsin a single phase. The production of the three-layer structure takes place in a single moulding cell:1. injection of the rigid structural carrier in Reblend® (PC/ABS alloy)2. injection and foaming of the intermediate structural layer (MuCell® foamed Pibiflex®)3. injection of upper soft-touch layer in Pibiflex®BENEFITS Pibiflex® 3567 S2 meets the requirements APPLICATIONS of the following automotive norms: dashboard Leaner logistics and production cycle door panels Cost reduction material properties DBL 5562.50 armrest Full recyclability of the entire item, in compliance climate resistance test with EU Directive 2000/53/EC – ELV (alternating climates) DBL 5471 BI-MATERIAL (End of Life Vehicles) constant climate (dry hot) DBL 5471 Soft skin and foam: constant climate (wet hot) DBL 5471 Pibiflex® 3567S2The soft-touch skin is made with Pibiflex® 3567 S2 colour change after climate storage DBL 5471 copolyester thermoplastica grade specifically developed for this application solar simulation DBL 5471 elastomer with improvedwhich guarantees: abrasion resistance DIN EN ISO 105-X12 foamability, excellent scratch scratch resistance DBL 5471 and UV resistance, very high UV and scratch resistance emission analysis VOC DBL 8585 – VDA 278 Carrier: combined with excellent haptic properties emission analysis FOG DBL 8585 – VDA 278 Reblend® 5510 M4 odour test DBL 5471 – VDA 270 PC/ABS alloy, 20% talc filled, preservation of properties (haptic and softness) fogging test DBL 5471 – DIN 75 201 with good flowability even at very low temperature and high dimensional stability excellent aesthetic properties in various colours 24 high chemical affinity with the gas used in the MuCell® foaming process high chemical affinity with the structural carrier made in PC/ABSThe high chemical affinity of the materials usedensures a perfect adhesion between rigid and soft part,as confirmed by specific tests.

ETP Engineering Thermoplastics TPE Thermoplastic ElastomersProcessing technology Dolphin REBLEND 5510 M4 Processing technology DolphinApplication Carrier PC+ABS, 20% talc filled, Application SkinMaterial reference REBLEND 8020OP high dimensional stability Material reference PC+ABS unreinforced, PIBIFLEX 3567S2Material description high dimensional stability 1.28 Material description TPC Copolyester Thermoplastic Elastomer, - excellent foamability and haptic properties,physical properties method unit 20.0 physical properties high UV and scratch resistancedensity 23°C ASTM D 1505 g/cm3 1.16 0.20 hardnesslinear mould shrinkage ASTM D 955 % 0.55-0.75 density 23°C method unitMFI melt flow index ASTM D 1238 g/10' 20.0 MFI melt flow index ASTM D2240 Shore D 35water absorption at saturation water absorption at saturation % 0.70 ASTM D 1505 g/cm3 1.12mechanical properties mechanical propertiestensile strength at break tensile strength at break ASTM D 1238 g/10' 25.0elongation at break elongation at breaktensile modulus tensile modulus % 0.90flexural modulus flexural modulusIZOD impact strength, ASTM D 638 MPa 55 55 ASTM D 638 MPa 18notched 23°C ASTM D 638 % >50 4 ASTM D 638 % 750Charpy impact strength, 2400 4100 -notched 23°C ASTM D 790 MPa 2800 4000 ASTM D 790 MPa 55 55thermal properties ASTM D 256 J/m 650VICAT B (50°C/h - 50 N) 4 kJ/m2 60HDT 1.820 MPa ASTM D 1525 °C 132 130flame resistance 110 115flame resistance 3.2 mm ASTM D °C 648 - UL 94 Class HB 25

SMARTOUCH 2KBi-material TPE/PP system for soft-touch dashboard and interior panelsSMARTOUCH 2K is a new TPE/PP system for the production of soft-touch dashboard and interior panels by meansof co-injection moulding. The strength of this system stands in its simplicity and cost effectiveness.Suitable for A-B-C segment vehicles,it consists of a soft-touch surface layer with excellent haptic and aesthetic properties, overmoulded on a reinforcedpolypropylene carrier with high dimensional stability. The entire system can be very easily mouldedon traditional presses for bi-injection (2K).SMARTOUCH 2K offers the automotive industry a competitive and multi-beneficial alternative to foil (TPO, PVC)and rigid (PP, ABS) dashboard systems and helps car manufacturers achieve the goals of sustainabilitycontained in European Directive 2000/53/EC-ELV (End of Life Vehicles).BENEFITS Production Process APPLICATIONSRecycling Excellent moulding properties, dashboard can be used on existing 2K equipment passenger airbag cover The complete panel is 100% recyclable: door panels can be grinded and produces new high-quality Automotive norms compliance central console reusable raw material Test performed by independent laboratories have proved BI-MATERIALTechnical properties that Smartouch 2K meets the requirements of the automotive industry (ageing, fogging, VOCs emission) Soft touch layer: Good ageing resistance TPE compound co-injected Excellent fogging values Safety directly on the carrier Excellent temperature performance (ranging from -40°C to 120°C) Does not contain heavy metals, phtalates, PAH Carrier: Good abrasion and scratch resistance or other hazardous substances, according Polifor® L20 GFT/30 H to international regulations reinforced polypropylene (PP)Design properties compound with high Purchasing benefits dimensional stability Valuable aesthetical and haptical properties Suitable for A-B-C segment vehicles Economies of scale in purchasing (soft+rigid part) Suitable for all applications in which Competitive price /quality ratio a good perceived quality is required Customization Possibility to customize the properties and features of soft and rigid layer, ranging from economical to medium segment (hardness, color, softness, strength) 26

ETP Engineering Thermoplastics TPE Thermoplastic ElastomersProcessing technology 2K injection moulding Processing technology 2K injection mouldingApplication Application Soft touch upper layerMaterial reference Carrier Material reference laprene 8ST1.A80/T2Material description POLIFOR L20 GFT/30H Material description SEBS compound designed to provide an excellent appearance with any type of embossing surface.physical properties PP homopolymer, 30% mineral and physical properties High UV and scratch resistance, excellent fogging valuesdensity 23°C chemically coupled glass fibre reinforced, hardnessMFI melt flow index heat stabilized density 23°C method unit values ASTM D2240 Shore A 84mechanical properties method unit values mechanical propertiestensile strength at yield 1.12-1.16 tensile strength at break ASTM D 1505 g/cm3 0.91elongation at break ASTM D 1505 g /cm3 8.0 elongation at breakflexural modulus ASTM D 1238 g /10' modulus 100%IZOD impact strength, tear strengthnotched 23°C ASTM D 638 MPa 62 ASTM D 638 MPa 12.5 ASTM D 638 % >5 780thermal properties ASTM D 790 MPa 4300 ASTM D 638 % 3.7VICAT B (50°C/h - 50 N) 50HDT 1.820 MPa ASTM D 256 J/m 80 ASTM D412-C MPaflame resistance ASTM D 624-C N/flame resistance 3.2 mm mm ASTM D 1525 °C 114 ASTM D 648 °C 145 UL 94 Class HB 27



3

AUTO EN 1016SO.F.TER. SPAHeadquartersVia Mastro Giorgio 147122 Forlì, Italytel +39 0543 790411fax +39 0543 [email protected] SO.F.TER. DEUTSCHLAND GMBHWeidacher Straße 2670794 Filderstadt, Germanytel +49 711 327000-0fax +49 711 [email protected]. USA400 Innovative WayLebanon, TN 37090, UStel +1 844 657 6383 (THINKSOFTER)[email protected]. BRASILCOMPOSTOS TERMOPLÁSTICOS LTDAAv. Edgar Hoffmeister, 275CEP 93700-000Campo Bom, RS, Braziltel +55 51 2123 2610fax +55 51 2123 [email protected] SOCIEDAD FORLIVESATERMOPLASTICOS S.A. DE C.V.Circuito Mexiamora Norte N° 345Puerto Interior, Silao, G.toMexico 36275tel +52 472 722 6923fax +52 472 103 [email protected] www.softergroup.com