All Hazards Detection | EPE

All Hazards DetectionChem/TIC/TIM Explosive Narcotic Biological Radiation Metal Non Metal www.epequip.com

All Hazards DetectionWhether the release or discovery of Chemical, Biological, Radiological, Nuclear and Explosive(CBRNE) materials is accidental or intentional, criminal or terrorist, natural or man-made, the abilityto detect the presence of these unseen threats is becoming increasingly important. In order tosecure borders and infrastructure, prevent loss of life, disruption to essential services and theexecution of a criminal or terrorist act, first responders, military personnel and emergency servicesneed a complete suite of detection and diagnostic tools at their fingertips.The SolutionEPE has assembled a range of cost effective, high performance equipment from leadingmanufacturers around the world to detect, locate and identify CBRNE threats. From presumptivetests for Chemical Warfare Agents (CWA), Toxic Industrial Chemicals (TIC)/ Toxic Industrial Materials(TIM) and Narcotics through to laboratory grade analysis tools EPE has sourced technologies thatcover the whole spectrum of capabilities.If your requirement is for field deployable, lightweight solutions integrated onto robotic or UnmannedAerial Vehicle (UAV) platforms, or for stand-off systems that enable discreet or covert observation,EPE can provide the necessary equipment, training and maintenance support along with specialistadvice, to ensure your world-class detection solution is operational and available 24/7.Fentanyl DangerFentanyl is a synthetic opiate painkiller that is much stronger than morphine or heroin. Illicit useof pharmaceutical fentanyl and its analogues first appeared in the mid-1970s in the medicalcommunity and continues in the present. Fentanyl analogues may be hundreds of times morepotent than street heroin, and tend to produce significantly more respiratory depression, making itmuch more dangerous than heroin to users. Fentanyl is used orally, smoked, snorted, or injected. Heroin - 300mg Fentanyl - 3mg Carfentanil - 0.02mg Source: New Hampshire State Police Forensic LabFor more information regarding our products please contact us:Brisbane AustraliaPh: +61 (0) 7 3308 9300Fax: +61 (0) 7 3308 9399Email: [email protected]

Chem/TIC/TIM Explosive Narcotic Biological Radiation Metal Non MetalPRODUCT RANGEFRDK - p4Fentanyl Detection - p5Explosive IMASS - p6ELITE - p6IDEX - p6IDEX ULTRA - p6Trace PRO - p6HandyRam - p7LCD 3.3 - p8GID 3 - p9SABRE 5000 - p9MMTD - p9IONSCAN 600 - p9HazMatID Elite - p10Guardion - p11Target ID - p11DABIT - p11Fen-Her DXC-001 - p11BioScreener - p12Biothreat IMASS - p12Bobcat - p12FilmArray - p12RAZOR EX - p13CPEDS - p14Second Sight - p14PRIED - p15EPD MK 2+ - p16RadEye SPRD - p16RadEye PRD - CDA - p16RadEye B20 - p17RIIDEye - p17Mobile ARIS - p18RadHalo - p18Syclone - p18Guardian Predator - p18PackEye - p19MD4 - p20MD 3000 - p20VMR 3 - p20GroundShark - p20XPOSE - p20SB10 - p20AMULET - p21INSTANTEYE GEN4 - p22ROVISS - p23TALON CBRNE - p23

First Responder Detection Kit (FRDK) Complete Solution for First RespondersWhen reacting to incidents involving EPE has assembled a kit of thepotential hazardous materials, easiest to use, most reliable, fasttoday’s First Responders need to and accurate detection solutionsbe able to make rapid informed on the market today to provide firstdecisions in order to apply the correct responders with a one-stop go-tocourse of action. No single solution package for all their immediate needsexists to warn of the presence of all when faced with unknown powders,the possible threats. liquids or other substances.Chemical LCD 3.3 More Details page 8Biological Based on leading IMS technology, the LCD 3.3 is a light and versatile CWA and TIC detector. LCD 3.3 is an advanced warning device, that alarms to gas and vapour threats detected and identified at or below Immediately Dangerous to Life and Health (IDLH) levels, by determining the agent or type, class, concentration and dosage of chemical exposure. It can also be used as a screening and survey device. Biothreat IMASS More Details page 12 The IMASS™ device provides a crucial advance in rapid testing, particularly for ‘white powder’ incidents. The device is used to directly sample powders, surfaces or liquids using an integrated sponge, then eight immunoassay strips are run simultaneously from the sample giving results for eight biothreat agents.Radiological RadEye SPRD More Details page 16 RadEye B20 More Details page 17 This instrument provides first responders These modern and compact survey and law enforcement teams like border meters measure alpha, beta, gamma guards or special forces with high and X-ray surface contamination. performance detection and radionuclide In addition it can also be used for analysis for any scenario. accurate doserate surveys.Narcotics & HandyRam™ II More Details page 7 Fen-Her™ More Details page 11 Explosives Compact, ruggedised Raman Fen-Her™ Model DXC-001 gives law spectrometer that is incredibly enforcement a new, safer and more powerful. It is able to analyse accurate kit for the presumptive thousands of explosives, narcotics identification of fentanyl, fentanyl and toxic chemicals in seconds. derivatives, and heroin.4 Complete Solution

Fentanyl DetectionFrom safe and accurate pocket sized presumptive field test kits, to field portable detectors utilisingRaman Spectroscopy, IMS or FTIR, there is a product to suit every application for each end-user.Today’s first responders and drug enforcement teams are increasingly facing greater threats from new hazardsand challenges everyday. Fentanyl, a potent, synthetic opioid narcotic is 50 to 100 times stronger than morphineand is reported to be the most widely used synthetic opioid in medicine. When used for illegal and recreationalpurposes, there is a high risk of overdose to emergency responders at the resulting incidents.The potency of Fentanyls creates a significant risk for emergency response, customs and law enforcementofficers when working in an environment where Fentanyls are present. Inhaling or touching just a few granulescan produce immediate and potentially fatal symptoms. There are known examples where first responders havebeen hospitalised due to inadvertent Fentanyl exposure.Fentanyl Detection Fen-Her™ More Details page 11 FFI’s new Model DXC-001 give law enforcement a new, much safer and much more 5 accurate kit for the presumptive identification of fentanyl, fentanyl derivatives, and heroin. HazMatID Elite More Details page 10 HazmatID Elite Handheld FT-IR Chemical Identifier is a next-generation handheld unknown solid and liquid chemical identifier that combines high performance with simplicity and performs an analysis in 1 minute or less. IONSCAN 600 More Details page 9 This highly sensitive trace detector allows users to accurately detect and identify a wide range of military, commercial and homemade explosives threats and common illegal and controlled narcotics. It features a proprietary non-radioactive ion mobility spectrometry (IMS) source, which means licensing from national nuclear regulatory agencies is not required. Target ID More Details page 11 Combining the power, speed, and accuracy of FTIR with a library of up to 2,500 narcotics, precursors, common chemicals, and cutting agents, the Target ID returns identification results in a matter of seconds without damaging or degrading the sample. HandyRam™ II More Details page 7 Compact, ruggedised Raman spectrometer that is incredibly powerful. It is able to analyse thousands of explosives, narcotics and toxic chemicals in seconds. Complete Solution

Explosive IMASSThe explosive detection IMASS™ device provides a crucial advance in rapid explosivedetection for military, police, border and other first responders. The device is used to directlysample surfaces, solids and liquids using an integrated sponge. A number of test stripsare then run simultaneously from the sample, giving visual results for military explosivesand multiple homemade explosive components in 3 minutes.“BBI Detection™ and IMASS™ are trademarks of BBI Solutions OEM Ltd t/a BBI Detection. The IMASS™ device is manufactured and sold under licence from the UK Secretary of State for Defence.Pat. No. GB2460956 and US12/999,064. Pat. Pend: EP09766120.1 Manufactured by BBI Detection, 8 Tom McDonald Avenue, Dundee, DD2 1NH.ELITEThe Elite reliably detects the presence of explosives and propellants. It is self contained,requiring only a small auxiliary heating system such as a butane lighter or battery poweredheater. To collect a sample, rub the swab on the suspect area, object or person andthen place the swab back into the card for testing. Several categories of explosivescan be tested, including nitro aromatics, aliphatics, inorganics, bromates, chlorates andperchlorates.IDEXThe IDEX™ Series of explosives identifiers each identify only one category of explosiveor precursor instead of testing for a broad range of explosives. The IDEX™ Series aredesigned to identify visible amounts of explosives through a color change on a samplertip - detecting/identifying bulk explosives rather than trace amounts of explosives. EveryIDEX™ tester is packaged in a convenient, disposable (and recyclable) plastic tube that’sdurable yet easy to open and is easily carried in a pant or shirt pocket.IDEX ULTRAThe IDEX-ULTRA™ is a colorimetric, disposable tester that in one step detects and identifiestrace quantities of chlorates, ammonium and nitrates, and, it identifies bulk (visible) quantitiesof material. So, the IDEX-ULTRA™ detects and identifies not only Home Made Explosive(HME) precursors but also HME - chlorate mixtures, Ammonium Nitrate (AN), CalciumAmmonium Nitrate (CAN) and mixtures. IDEX-ULTRA™ is simple to use, has a long shelf-life and rugged packaging. It can even help identify safe, non-HME fertilisers.Trace ProSmiths Detection introduces the future of trace explosive detection in a revolutionary,small, lightweight and handheld device. This exciting new development offers the smallestexplosive detector on the market; weighing less than 1.4kg. The detector utilises SmithsDetection’s proprietary and proven non-radioactive miniaturised Ion Mobility Spectrometry(IMS) detection technology; capable of detecting an extensive list of explosives down tosingle digit nanogram levels.6 Explosive Detection System

HandyRam™ IIPocket-sized Identifier of Narcotics, Explosives and PrecursorsThis incredibly small Raman handheld analyser identifies illicit narcotics,controlled drugs, explosives materials, pharmaceutical ingredients and a widerange of unknown substances. Thousands of compounds are available in FFI’sspectral libraries. It also analyses and reports the components of mixtures.HandyRam™ II is a compact, ruggedised Raman spectrometer that is incrediblypowerful. It is able to analyse thousands of explosives, narcotics and toxicchemicals in seconds. Laser power is adjustable and uses programmableacquisition delay when measuring energetic materials.HandyRam™ II features a durable and waterproof construction yet canalso be connected to a PC for detailed spectral analysis, library and recordmanagement. The system has tactile buttons for operation designed for usewhile wearing gloves.Accessories include: pouch, shoulder strap, USB cable, laser aperture capwith polystyrene target, sample vials, point-and-shoot adapter, vial holder,90° angle adapter, attachment point, connection kit ethernet and WIFI, ACAdapter 5 VDC/1 A USB Weight Handy RAM Size 650 g Display 15.8 cm x 10.1 cm x 2.9 cmExcitation wave length 3.5” transmissive color TFT with LED backlighting Wavenumber Range 785 nm (100 mW) Sampling Methods 400 cm-1 to 2300 cm-1 Spectral libraries Point and shoot adaptor for gels, liquids, powders, solids Spectral library easily updated with new chemical compounds Interface Mini-USB & WIFI Chemical Detection System 7

LCD 3.3Compact, Wearable CWA Identifier and TIC DetectorBased on leading IMS technology, the LCD 3.3 is a light and versatile CWA and TIC detector. LCD 3.3 is an advanced warningdevice, that alarms to gas and vapour threats detected and identified at or below Immediately Dangerous to Life and Health(IDLH) levels, by determining the agent or type, class, concentration and dosage of chemical exposure. It can also be usedas a screening and survey device.Flexible mounting options allow the LCD 3.3 to be handheld or clipped to a belt, harness or shoulder strap, to enable the userto undertake their primary role without obstruction. Features include both audible and visual alarms plus a clear, easy-to-readliquid crystal display. The device is very simple to operate and requires no calibration or complicated routine maintenance.The impressive performance of the LCD 3.3 combined with its ergonomic design and functionality provides a wide range ofuser capability while ensuring a minimal logistical burden.LCD 3.3 was selected by the US DoD for the Joint Chemical Agent Detector (JCAD) programme. The LCD 3.3 is backedby first-rate service, training and support to ensure optimum product performance. Smiths Detection is a leading worldwideprovider of government regulated technology products and advanced services that aid in the detection and identification ofCBRNE material and other dangerous or illegal substances.Three modes of operation• CWA & TICs: for the detection of chemical warfare agents and toxic industrial chemicals• CWA Only: for the detection of chemical warfare agents• Survey: for the detection of residual persistent contamination following decontamination Weight LCD 3.3 Size 580 g Detection Technology 10.6 cm x 18.0 cm x 4.65 cm Agents Detected Advanced non rad Ion Mobility Spectrometry Accessories Nerve, blood, blister, choking and a selected library of TICs Additional accessories are available to increase the capability of the LCD 3.3 Operating temperature // humidity -32°C to 60°C // 0 to 100% RH8 Chemical Detection System

GID 3 9The most widely fielded and battle proven detector in the world, GID-3 is highly portable,easy to use and rapidly deployed. As well as point detection, it can monitor the integrityof collective protective systems in vehicles, command bunkers and small ships. GID-3detects and measures the concentration levels of CWA and TIC. Operated remotely,the GID-3 provides perimeter protection either as a standalone unit, or networkedtogether using hardwired or wireless systems. Vehicle-or ship-mounted, it can monitorcontamination of the outside air or alert personnel to the presence of a chemical agentwithin the vehicle interior.SABRE 5000The SABRE 5000 is the smallest, lightest tri-mode handheld system available for detectingtrace amounts of explosives, CWA, TIC or narcotics. With its ability to detect a widerange of threats, it is a cost effective instrument for security professionals and militaryagencies that require portability and flexibility to perform their duties.Using Smiths Detection’s proven IMS technology the SABRE 5000 is programmed todetect and identify over 40 threat substances in approximately 20 seconds.MMTDThe Multi Mode Threat Detector (MMTD) takes portable threat detection to a new levelwithout compromising portability or functionality. Designed to IP54 rating for operation inextreme environmental conditions, the MMTD is a rugged, portable handheld system forthe rapid detection and identification of explosives, narcotics or CWA/TIC, featuring anoptimised detection capability for peroxides, taggants and methamphetamine precursors.Four operating modes are available, including a dual mode setting for simultaneousdetection of explosives and narcotics from one sample.IONSCAN 600This highly sensitive trace detector allows users to accurately detect and identify a widerange of military, commercial and homemade explosives threats and common illegal andcontrolled narcotics. It features a proprietary non-radioactive ion mobility spectrometry(IMS) source, which means licensing from national nuclear regulatory agencies is notrequired. The compact, lightweight IONSCAN 600 is easily portable; it includes hot-swappable batteries for full operation even when mains power is not available. The unitcan be relocated while fully operational (without any downtime) enabling it to be usedin a much broader range of screening environments. Chemical Detection System

HazMatID EliteHotzone Handheld FTIR Chemical IdentifierHazMatID Elite is a next-generation handheld unknown solid and liquid chemical identifier that combines highperformance with simplicity and performs an analysis in 1 minute or less. Using Fourier Transform Infrared (FTIR) spectroscopy,HazMatID Elite is capable of identifying CWA, explosives, TIC, narcotics, suspicious powders, among other dangerouschemical classes. Analysis is performed by placing a small amount of unknown substance onto the diamond ATR sensorand applying pressure with an integrated press for solid samples. The sample interface also includes an integrated well forthe containment of liquid samples.A second, touch-to-sample, diamond ATR interface is available for rapid analysis of pooled liquids and surface films, andenables robotics applications. MIL-STD-810G certified for operation in harsh conditions, HazMatID Elite has the widest thermaland solar operational range of any portable or handheld chemical identifier. Its revolutionary optical engine also provides highvibration immunity and resistance to mechanical disturbances seen during vehicle or human transport.Optimised for easy operation in personal protective gearSimplified user interface requires minimal training Instructional graphics guide users through Clear and precise analysis results to device operation enable decisive actions Weight HazMatID Elite Size 2.29 kgSample interface Decon 26.9 cm x 14.3 cm x 7.9 cm User interface Diamond ATR sensor with integrated solid press and liquids well Second touch-to-sample diamond ATR sensor for direct sampling IP-67 rated and sealed for decontamination by immersion 4.3 inches internally-bonded LCD colour display for high visibility in direct sunlight conditions. Individually-lit keypad and instructional graphics guide users through the operation of the device10 Chemical Detection System

GuaarrddioionnGuardion utilises high speed, high resolution Gas Chromatography (GC) and arevolutionary miniaturised toroidal ion trap Mass Spectrometer (MS) to identify volatileand semi-volatile organic compounds in complex gases, vapors, liquids and solids.Guardion is hand-portable and ruggedised for use in a hot zone or extreme environments.Its high speed GC combined with the miniaturised toroidal ion trap mass spectrometerredefines the size, weight, and speed for hand-portable GC/MS technology. Guardionis ready to operate within five minutes from a cold start. The CUSTODION™, a SolidPhase Microextraction (SPME) fiber syringe, is used for simple sample collection andinjection into the GC/MS system.Target IDTarget-ID is the first Fourier-Transform Infrared (FTIR) spectroscopy analyzer specificallydesigned to support narcotics interdiction efforts. Combining the power, speed,and accuracy of FTIR with a library of up to 2,500 narcotics, precursors, commonchemicals, and cutting agents; Target-ID returns identification results in a matter ofseconds without damaging or degrading the sample.In addition, Target-ID is capable of identifying emerging synthetic designer drugs. Itscustomizable user library easily allows localized drug variants to be added. Designedfor ease of use by personnel of different skill levels, minimal training is required foroperation.DABITDespite there already being several types of colorimetric drug test kits on the marketfor use in identifying narcotics and drugs of abuse, none of them is durable enoughto satisfy the rigorous requirements of end-users in, for example, the FBI or SpecialOperations Command.Field Forensics was asked by its customers to develop simpler, more rugged drugtest kits which, like FFI’s field-proven explosives detection kits, do NOT require specialstorage or refrigeration.Fen-Her Model DXC-001Fen-Her™ Model DXC-001 gives law enforcement a new, safer and more accurate kitfor the presumptive identification of fentanyl, fentanyl derivatives, and heroin. Fen-Her™ Differentiates Heroin Fentanylmorphine heroin salts fentanyl freebase furanyl fentanylmonoacetyl morphine heroin freebase carfentanil a-methylfentanyl acetyl fentanyl trans-3-methyl fentanyl fentanyl citrate cis-3-methyl fentanyl methoxyacetyl fentanyl Tests of additional fentanyl derivatives are in progress... Chemical Detection System 11

BioScreener BioScreener™ is a disposable presumptive test that identifies potential threat-agents such as suspicious powders; within approximately 30 seconds, identify whether a substance is a probable bio-weapons agent or just a harmless powder. Collect the sample by simply dabbing the sample tip on the suspect material; analyze the sample by cracking the built-in ampoules and watching for the specified colour change. BioScreener™ can eliminate the threat posed by a suspicious powder in seconds. Instead of shutting down an area for hours or days pending results of an analysis, first responders can identify a suspicious powder as a non bio-agent in seconds. Biothreat IMASS The IMASS™ device provides a crucial advance in rapid testing, particularly for ‘white powder’ incidents. The device is used to directly sample powders, surfaces or liquids using an integrated sponge, then eight immunoassay strips are run simultaneously from the sample giving results for eight biothreat agents in 15 minutes. Its robust design means that the IMASS™ device is straightforward to run and to read, even while wearing full protective equipment. The IMASS™ device contains coded test strips to detect up to 8 biothreat agents which are among those noted by the US center for disease control as being the highest risk if utilised in a terrorist attack. “BBI Detection™ and IMASS™ are trademarks of BBI Solutions OEM Ltd t/a BBI Detection. The IMASS™ device is manufactured and sold under licence from the UK Secretary of State for Defence. Pat. No. GB2460956 and US12/999,064. Pat. Pend: EP09766120.1 Manufactured by BBI Detection, 8 Tom McDonald Avenue, Dundee, DD2 1NH. Bobcat The Bobcat is a lightweight, portable, dry filter air sampler with a unique sample recovery system. The Bobcat has been developed to address a broad range of air sampling requirements. It is ideally suited for the collection of bioaerosols and particulate matter; including submicron-sized particles, airborne molecular contamination, and particulates. Recovering a sample from dry filters has never been easier. With InnovaPrep’s patented Rapid Filter Elution Kit, filter recovery takes only seconds; it releases particles with minimal liquid and unsurpassed efficiencies. The Bobcat was created for tactical use, it can be custom configured to be triggered by other systems, or it can be operated as a stand-alone unit. FilmArray The FilmArray is able to identify, in a closed system, dozens of the most lethal viruses and bacteria, including emerging infectious diseases. The easy-to-use, syringe- loaded system represents the next generation in automated detection systems. The FilmArray uses a plastic pouch with automated capabilities, including sample preparation, reverse transcription for RNA viruses, and a two-stage nested multiplex PCR process. The results are a revolutionary detection system in a lightweight, small- footprint format.12 Biological Detection System

RAZOR EXComplete Field-deployable SolutionThe advanced RAZOR EX system employs Real-time Polymerase Chain Reaction (PCR) technology to deliver the mostreliable and sensitive detection and identification of biological pathogens in the field.Designed specifically for field use, the compact and lightweight design of the RAZOR EX allows it to be hand carried and minimalsample preparation requirements make it easy to use. Used with The 10® Target Screen Kit, the RAZOR EX simultaneouslytests ten pathogens with reliable, DNA-based results available in less than 30 minutes. Developed for first responders andfront line military troops, it is easily operated while working in protective equipment under extreme conditions. The newbattery powered instrument includes Bluetooth® capabilities, bar code reader, and a bright, easy-to-read colour screen.The RAZOR EX utilises BioFire Diagnostics’ patented reagent pouch system integrated freeze-driedreagents packaged in durable plastic pouches for incomparable ease of use. A variety of pre-formattedpouch configurations are available for biothreat, food testing, water testing, or environmental testingapplications.RAZOR EX InstrumentThe compact unit comes loaded in a durable Pelican case with the instrument, battery, and recharger. The system is 110/220Vcompatible and has passed rigorous environmental testing. It was designed to operate as a stand-alone unit.• Automatic analysis (Yes/No answer) • Hot swappable power• Battery powered— Re-chargeable (8 runs/charge) • Wireless or USB connectivity• Large built-in colour display shows real-time fluorescent tracings • Weighs 5 kgUser InterfaceInternal calibration and diagnostics ensure the instrument is functioning within tolerances before and during operation.Automatic analysis software runs “on-the-fly,” with raw data and software analysis presented simultaneously.• Designed for use in personal protective equipment • Large intuitive push-buttons• Bar code reader for protocol and pouch information uploads • Bright colour screen Biological Detection System 13

CPEDSCheck Point Explosive Detection System (CPEDS)Alakai Defence Systems’ CPEDS is an extreme standoff range explosive detectionsystem for Entry Point Security, Bulk Explosives Detection, Exploitation, and Forensicsapplications. The system can be operated remotely further isolating the operatorfrom the blast radius. CPEDS employs deep UV Raman Spectroscopic Detectionmethodologies for robust detection using Alakai’s patented, proprietary eye-safetytechnology. CPEDS is a simple point & shoot system.The real-time threat/no-threat results are displayed by a simple Red Light/Green Light indicator for securitypersonnel. Alternatively, the system will not only detect a threat, but also identify the type of material detected whenneeded. Finally, CPEDS can also export detailed analysis for experts across the globe. The current tailorable threatlist includes selected explosives, homemade explosives, CWA, chemical residues, pollutants, TIC and precursors. Weight CPEDS Size 295 kg Power Consumption 122 cm x 122 cm x 61 cm (w x h x d) Input Voltage ≈ 1.8 Kw Operation Temperature ≈ 110 or 240 VacEnvironmental Hardening -20 to 49°C MILSPEC 810-GSecond SightStandoff Real Time Gas DetectorSecond Sight® MS is the perfect solution for critical area surveillance and protectionagainst chemical threats (CWA, TIC). With night and day surveillance capability,Second Sight® MS detects, identifies and visualises a cloud of dangerous gas in realtime at a distance up to 5km.Main Applications:• Early warning in case of chemical threat on thr battlefield• First responders vehicle deployment for public events• Enhanced surveillance of industrial sitesGas List:• Blister Agents: “Mustard gas” Yperite (HD), Lewisite• Nerve Agents: Tabun (GA), Sarin (GB), GD, VX• TIC: Ammonia, Carbonyl chloride, HCN (hydrogen cyanide), etc. Weight Second Sight Gas Database Detection range Head camera + processing unit : 10.2kg Time to detect > 50 Time to alarm Field of View (FOV) From 2 m up to 5 km < 2 seconds14 < 8 seconds 2 objectives of 30° and 60° Standoff Detection System

PRIEDPortable Raman Improvised Explosive DetectorThe PRIED is based upon proven technology that until recently was only available as a vehicle mounted capability.The evolution of this into a man-packable version will enable lightweight, portable stand-off detection that is ableto provide early warning and covert identification of explosive compounds in varying scenarios such as checkpoints, venues, areas, buildings and targets of interest.Comprehensive, Expandable Library Combined with Ease of UseThe PRIED unique design implements UV Raman technology to provide stand-off explosive and CWA detection.It has an expandable library presently containing more than 30 fingerprints for Explosives, HME, TIC/ TIM andCWA, which can be readily updated.Stand-Off Raman With Fast Detection TimesThe UV Raman does not detonate any materials and as such a high level of assurancecan be expected and achieved. The PRIED is completely eye-safe utilising Alakai’spatented Stimulation Aversion techniques. Alakai has focused its design effort toensure that the PRIED’s design and UV RAMAN technology implementation deliversafe and highly effective explosive stand-off detection. Functionality PRIEDTwo Modes of Operation Single button operation, point & shoot Library Red/Green Light Results & audible alarm Eye Safety Records images for forensics Bluetooth comm. link to Android (optional) 15 Eye-safe Operation (class 2 laser) Password enabled max detect (class 3 laser) Easily expandable Contains >30 Explosives, HME, TIC/TIM, CWA, etc Utilises Alakai’s patented Stimulation, Aversion technique Standoff Detection System

EPD Mk2+ Emergency Services personnel and First Responders need to constantly monitor their exposure to potentially harmful radiation. Thermo Scientific™ EPD Electronic Personal Dosimeters monitor exposure to ionising radiation in real time and emit both audible and visual alarms so that personnel can react quickly when an acceptable dose rate level is exceeded. EPD Mk2+ combines unequalled radiological performance with advanced software and hardware features. The Mk2+ electronic personal dosimeter is perfect for organisations, utilities, agencies, and research laboratories to monitor employee dose and dose rates. The Mk2+ also boasts a ruggedised battery cap and an improved display. The unit is powered by a single standard AA cell, either 1.5V alkaline or 3.6V Lithium Thionyl Chloride for maximum battery life. Pre-use integrity checks may be initiated over the IR (Infra-Red) communications link as part of the EPD Issue process of access control or dosimetry management systems.RadEye SPRD The detection and analysis of hidden radioactive nuclides requires a radiation identification tool with high sensitivity and accuracy. Detect, localise and identify Gamma sources with the pager-sized Thermo Scientific™ RadEye™ SPRD Spectroscopic Personal Radiation Detector. The RadEye SPRD provides first responders and law enforcement teams like border guards or special forces with high performance detection and radionuclide analysis for any scenario. Users that need to detect, locate and identify orphan radionuclides can now add an additional level of security, using the RadEye SPRD. The ability to perform nuclide identification in a pager sized Personal Radiation Detector (PRD) offers advantages over current market options; including, compact size, low weight, long battery life time and low cost of ownership. This combination makes the RadEye SPRD a perfect tool for users detecting, locating and identifying sources of radiation as a secondary requirement of their main task.RadEye PRD CDA The Thermo Scientific RadEye™ PRD-CDA System for contraband and radioactivity detection is ideal for inspection and search tasks. Robust and simple to use, it is designed to aid in the detection of contraband such as drugs, currency, tobacco, explosives and alcohol in concealed cavities of vehicles. It can carry out simultaneous detection of radioactivity with PRD sensitivity, doubling as a highly sensitive, belt worn personal radiation detector when not searching for contraband. The system consists of a RadEye PRD gamma pager combined with a RadEye contraband adapter made of a low activity Ba-133 source that is embedded in a tungsten collimator with automatic retracting shutter. The RadEye PRD-CDA contains a calibration block to automatically normalise readings accounting for the Ba133 half-life. Users wear the lightweight RadEye PRD-CDA on their belt, passively scanning for radiation at all times. Scanning vehicles for contraband is as simple as pulling the RadEye PRD-CDA out of the belt holster and opening the source shutter with the 2 step push button opening process.16 Radiation Detection System

RadEye B20Multi-Purpose Survey MeterThe Thermo Scientific RadEye™ B20 /B20-ER models are the next generationline of improved quick survey and precision scaler measurement meters. Thesemodern and compact survey meters measure alpha, beta, gamma and X-ray surfacecontamination. In addition these pocket-sized instruments can also be used foraccurate doserate surveys, if used with optional energy compensated filters (17 keV– 3 MeV). For emergency response applications, the alpha and beta contaminationmeasurements can be discriminated using the optional alpha blocker filter.The RadEye B20 will automatically switch to the proper measuring unit, if any auto detection filter is fitted to theface of the B20 detector. This automatic function helps to avoid accidental misuse and to quickly change fromone measurement to the next.Features and benefits of RadEye B20 and RadEye B20-ER• Light weight (300 g), excellent grip with and without gloves• Rugged and compact design, thick rubber protective cover• Low cost of ownership with > 500 h operation time with 2 AAA batteries – rechargeable NiMH-cells can be used• Menu-driven user interface results in low training cost and immediate familiarity• Huge internal data memory for both scaler results and continuous data recording• Bright backlit LCD display – plain text messages - different languages can be selected• Easy adaptation to different tasks by supervisor configuration, calibration, selection of measuring unitsRIIDEyeHandheld Radiation Detection and IdentificationThe Thermo Scientific™ RIIDEye™ detects and identifies radiation present in theenvironment using a simple, easy to understand interface. With 9 different modelsto choose from, RIIDEye can easily adapt to nearly any scenario from security cargoscreening to evaluating a water sample.It is the only RIID with real time spectra build and SNM Assist to allow users tocustomise scan time, optimising in process Misidentifications, based on real worldvariability.With patented QCC Technology (US #5,608,222), the gamma scintillation detector capabilities are maximised.QCC resolves difficult peaks by expanding the number of channels, while simultaneously compressing high energypeaks to improve the signal to noise ratio. Compressing higher energies and expanding lower energies, RIIDEyedifferentiates typical benign isotopes from those found in threat material such as SNM. All RIIDEye models areergonomically engineered for single grip operation and weight balanced for comfortable use, even in long termuse scenarios. RIIDEye requires little training to operate as its intuitive interface guides use to make effectiveand accurate measurements. With its standard ANSI N42.42-2006 compliant spectral data format, data can bereviewed on reachback PC based Software.RIIDEye is the next generation of tough, high-performance RIIDs, engineered to withstand extreme operatingconditions. The all-in one rugged design is ideally suited for radiation search, find and identification in harshenvironmental conditions. With its reinforced, dust proof and water resistant casing, RIIDEye is engineered foruse in nearly any operating scenario and can withstand a one meter drop to solid concrete.Radiation Detection System 17

Mobile ARIS The Matrix Mobile ARIS (Advanced Radioisotope Identification) detection system is an advanced integrated solution for radiation survey, patrol, and isotope identification. Mounted in a standard SUV, boat, or other vehicle, the system leverages the power of patented Natural Background Rejection technology and the proprietary ARIS System with Thermo Scientific ViewPoint Enterprise software. As an integral part of this software system, the ViewPoint Survey Client makes it possible to easily survey an area, determining the background radiation contour. The survey data, correlated with GPS mapping coordinates, is saved for comparison with readings taken during periodic patrols. RadHalo The Thermo Scientific™ RadHalo™ RDP and FM detect and identify gamma and neutron radiation as well as provide accurate dose rate measurement capability. With multiple configurations available RadHalo can adapt to any situation and budget from special event monitoring to rapid response for a nuclear power accident. RadHalo’s powerful processor runs simultaneous high accuracy dose rate and identification algorithms for high confidence measurements, whether you are monitoring radiation levels in a normal or emergency situation or whether you are using RadHalo to adjudicate a radiological alarm at a sporting event. Syclone The Syclone is one of the most accurate portable gamma spectrometers available. It quickly detects and accurately identifies gamma and neutron sources in the field despite rugged terrain, inclement weather, and other difficult conditions. The Syclone is lightweight, rugged, and specifically designed for field applications where harsh environments may be encountered. The large backlit display shows real-time count, count rate and dose rate in numeric and graphic format, with audio feedback for eyes-free operation. The Syclone contains high-capacity internal memory which allows large amounts of data to be stored by record number, date, and time. Guardian Predator The Guardian Predator is built to detect the presence of Naturally Occuring Radioactive Materials (NORM), legal, and illicit radioactive materials. The system incorporates state of the art passive scanning technology to detect changes in radiation levels emitted by gamma, high energy beta, and neutron radionuclides contained on persons and in objects, vehicles, or containers. The Ground Predator exceeds the strict requirements that military professionals, law enforcement, and emergency responders demand on today’s complex missions. This highly accurate and rugged detection system provides maximum sensitivity, and can be human or vehicle portable for multiple mission requirements.18 Radiation Detection System

PackEyeProtecting lives and livelihoods Neutron DetectionThe new Thermo Scientific™ FHT 1377 GN-2 PackEye is for The detection of neutron sources is performed with the helpthe rapid, high sensitive detection and location of gamma and of 2 ea. flat Li-6 scintillation detectors with an new proprietoryneutron radioactive sources with He-3 free neutron detector measurement technique, allowing minimal crosstalk and thetechnology. setting of a very low net alarm threshold level.• Natural Background Rejection (NBR) indicates artificial The PackEye FHT 1377 GN-2 exceeds the neutron detection sources - no false alarm from NORM and natural sensitivity of the well accepted and widely distributed background changes predecessor FHT 1377 comprising 2 ea. He-3 counter tubes (2.5 bar, 2” dia., active length 14”). A neutron source with an• Green flashing LED = Natural radiation (even at increased activity of 20.000 n/s can typically be detected at a distance level) Red LED = Artificial radiation of 3 m.• Non He-3 technology with high neutron detection Remote Monitoring with optional PDA sensitivity superior to He-3 Packeye neutron detection sensitivity The optional PDA (425505091) allows remote monitoring, so that the PackEye can be sealed in a watertight rugged• User friendly via LED status and level indication and case (4255085) and used as a portal monitor on a tripod optional PDA with GPS function stand (4255086), on a boat or as a vehicle mounted mobile detection system.• Very light weight at 7.5 kg (FHT 1377 GN-2, gamma/ neutron), 5 kg (FHT 1377 G, gamma only)• Low power consumption provides 30 hours of boperation time from a full charge.Alarm indication The PDA offers additional information like the short termIn addition to the detection of artificial gamma radiation a sigma history / finder mode to enablebased net count rate gamma alarm is active as well. Within the most effective searches. Thea preset count rate range this alarm level is constantly and PDA also displays live accurateautomatically updated according to the present background gamma dose rates and neutronlevel. count rates that can be stored together with GPS data.Once an alarm is triggered the location of the source canbe traced by using the Acoustic Search Mode and/or LEDbar indication. Optionally data display, alarm indication anddata storage can be performed with the help of a PDA withBluetooth™ communication. Radiation Detection System 19

MD4 MD4 The detection capabilities of this metal detector allow the operator to locate small targets and to gauge the depth and size of objects such as victim operated switches. The MD4 can be used in counter improvised device operations, counter terrorist search operations, crime scene investigation and post blast scene investigation. MD 3000 The MD 3000 is a versatile multi-purpose detector suitable for use by police, military and civilian users. It addresses requirements for crime scene and area search, explosive clearance and post event investigation. This detector introduces simplified controls, an ergonomic design and advanced battery management. VMR 3 VMR3 is an advanced technology, which combines a high performance Cobham Ground Penetrating Radar (GPR) with a Vallon Metal Detector (MD). The unit has been designed to deliver enhanced Counter-IED capabilities for the most demanding military requirements. The VMR3 is simple to use, providing the operator with clear audio signals to alert the presence of a potential mine threat. GroundShark GROUNDSHARK is a versatile handheld buried anomaly detector that can be utilised for a variety of different tasks and scenarios. The user-friendly system is comprised of a two channel GPR paired with Minelab’s electromagnetic induction-based Metal Detector (MD) sensor in a co-located configuration. This high performance handheld system detects buried hazards and anomalies. Xpose The Xpose is a compact lightweight handheld density meter used typically for contraband search. It provides a quick and efficient way to detect contraband hidden in vehicles, walls and containers; the Xpose has been designed to differentiate the density between surfaces where contraband material may have been stowed. By pressing the search activation buttons, Xpose powers on and measures the relative density of the object under observation. SB10 The Audiotel SB10 developing Non Linear Junction Detectors (NLJD) detects electronic devices when active, dormant or switched off and gives audible and visual indication of threat. The SB detector is available in a range of output powers 2W, 4W and 10W. An EOD variant is also available, which incorporates a metal detector for increased target detection and discrimination. 20 Metal and Non Metal Detection System

AMULETProtecting lives and livelihoodsCobham has developed the AMULET standoff buried threat detection system, which can be integrated onto any tacticalremote-controlled vehicle (RCV) or robot platform. The system is suitable for rapid area clearance and capable of detectingboth IEDs and traditional Anti-Tank (AT) mines.AMULET Detection SystemThe AMULET system will detect a wide range of buried metallic, minimum-metal or non-metallic threat types. The AMULETsystem comprises a 4-channel QuadPack Ground-Penetrating Radar (GPR) sensor, a remote controlled High Definitioncamera, a control box (all of which are mounted on the host robot) and a Trimble Yuma which acts as a wireless OperatorControl Unit (OCU).AMULET is a lightweight detection system, designed to be man-portable and deployed by a single operator. The GPRdetection technology within the QuadPack sensor is based around the operationally proven Cobham GPR incorporatedwithin the highly successful MINEHOUND handheld detector.Easy to useThe whole system is very easy to operate with intuitive controlsand clear audio and visual threat indications.The camera videofeed, threat indications and control data are all provided oversecure communication links.Simple to train AMULET can be supported using innovative Virtual-Reality (VR) training technology.It is also very simple to train users on AMULET. Cobham canadditionally provide a virtual-reality (VR) training system tosupport AMULET deployments. These VR trainers provide anumber of instructor-configurable representative scenarios.Different buried threat-types can be positioned within a fullysynthetic environment and presented to students prior tooperational use. Metal and Non Metal Detection System 21

InstantEye Mk-2 GEN4 Defining The Tactical Edge The InstantEye Mk-2 GEN4 sUAS is part of a family of high-performance, low-cost aerial systems that can be hand-launched and recovered by a single operator in any weather. The Mk-2 GEN4, a proven system with combat experience, provides immediate tactical ISR in urban and rural environments to inform the ground forces commander’s decision-making process. InstantEye is a full-spectrum organic enabler that provides on-demand situational awareness to enhance force protection and mitigate operational risk. The low base cost of the sUAS, coupled with the fact that no data is stored on the system, means commanders do not have to risk soldiers’ lives to recover a piece of technology. MicroUAV Chemical Agent and TIC Detection, ID, and Localisation – ChemMAV ChemMAV enables the InstantEye to be used for wide area reconnaissance and agent localisation. The real-time display indicates the InstantEye position as well as the time, coordinates, identification, and confidence level of any target CWA/TIC. It integrates the Smiths Detection LCD 3.3 to give detection and identification of CWA and TIC, with PSI’s common sensor interface module. Detection data is transmitted to a MILSTD 810G and IP65 hardened notebook computer, functioning as the Sensor Ground Control Station (S-GCS). A Sensor Communications Module (SCM), operating on an independent wireless link in the 900 MHz ISM band, includes a frame grabber to concurrently capture detection imagery from the flight vehicle with the sensor data. Any Windows 7+ computer with a USB port can be used as the S-GCS. MicroUAV Radionuclide Detection, Identification and Localisation – RadMAV RadMAV enables the InstantEye to be used for wide area reconnaissance and source localisation of up to 23 target radionuclides. As with ChemMAV, RadMAV’s real-time display indicates the InstantEye position as well as the time, coordinates, identification, dose rate, and confidence level of any target isotope. It uses PSI’s DNDO-award winning Poisson-Clutter Split (PCS) algorithm, operating in an onboard embedded processor called the Advanced Processor for Scintillators, to provide detection updates at 1 second intervals while employing a 3 second running average. Detection data is transmitted to a MIL-STD 810G and IP65 hardened notebook computer, functioning as the Sensor Ground Control Station (S-GCS).22 Unmanned Detection Platform

ROVISSRemotely Operated Vehicle Integrated Sensor SuiteROVISS provides a powerful capability to manage high risk situations by concurrentlydeploying multiple sensors to detect hazardous threats, such as explosives, radiation,chemical agents, TICs, TIMs and meteorological data.All sensor information is fused into a single computer on-board the Digital Vanguardrobot and relayed to the new x500 Integrated Command Portal to provide a cleanand effective display and management tool. The data from all sensors is fed into the on-board computer thentransmitted to the Command Post either wirelessly or by fibre cable.The ROVISS platform uses the Bruhn Newtech SCIM Hazardous prediction software for accurate mapping andplume prediction in real time. This can be an important tool for managing the threat and reducing risks to localpopulations. The software uses ATP45e and AEP45(C) protocols to map the incident based on the sensor data. ROVISS Sensor Suite Radiation Detector Smith Detection LCD 3.3 (page 8) for CWA and TIC Lower Explosive Limit (LEL) O2 Four Gas Sensor Explosives Detector Chemical Warfare Agent and TICs & TIMs Detector Aerosolized Biological Sensor ICX Fido® XT for trace explosives Meteorological GPS Station On Board Multi-Port ComputerTALON CBRNEModular CBRNE kits for GEN IV TALON robotSince its introduction more than a decade ago, QinetiQ North America’s TALON®family of robots has earned a reputation for durability, flexibility, modularity andperformance in keeping personnel, assets and civilians out of harm’s way. In military,law enforcement and first responder applications, these lightweight tracked vehiclesare widely deployed for improvised explosive device (IED) and explosive ordnancedisposal (EOD), reconnaissance, communications, CBRNE/hazmat, security, heavylift, defence and rescue missions.The system can be operated from the standard Operator Control Unit (OCU), Laptop Control Unit (LCU) or thelightweight Tactical Robotic Controller (TRC). The GUI operates the robot and displays the sensor data. Audioalarms alert the user of any hazardous conditions. TALON’s optional, heavy-lift, multiple-degree-of freedom armcan be used to open vehicles - making it a valuable addition to critical operations. Tray-Mounted Detection Capabilities TALON CBRNEGripper-Mounted Detection Capabilities Smith Detection LCD 3.3 (page 8) for CWA and TIC RAE MultiRAE Plus for volatile gases Thermo Scientific RadEye GN gamma and neutron radiation Raytek temperature probe for temperature sensing ICX Fido® XT for trace explosives Ahura First Defender RMX for identification of more than 7,500 explosives, precursors and chemicals Unmanned Detection Platform 23

For more information please contact us: Brisbane Australia +61 (0) 448 883 393 +61 (0) 7 3308 9300 [email protected] www.epequip.comNovember 2018 // Version 3.2