["Big Marble : LX-BM-012 LX-BM-011 BULKY CONCRETE LX-BM-012 BULKY CONCRETE \u0e43\u0e2b\u0e21\u0e48\u0e48 \u0e17\u0e19\u0e23\u0e2d\u0e22\u0e02\u0e35\u0e35\u0e14\u0e02\u0e48\u0e48\u0e27\u0e19 *\u0e23\u0e39\u0e39\u0e1b\u0e41\u0e1a\u0e1a\u0e41\u0e25\u0e30\u0e2a\u0e35\u0e43\u0e35 \u0e19\u0e20\u0e32\u0e1e\u0e16\u0e48\u0e48\u0e32\u0e22\u0e2d\u0e32\u0e08\u0e41\u0e15\u0e01\u0e15\u0e48\u0e32\u0e48 \u0e07\u0e08\u0e32\u0e01\u0e1c\u0e25\u0e34\u0e15\u0e34 \u0e20\u0e31\u0e13\u0e31 \u0e11\u0e4c\u0e4c\u0e08\u0e23\u0e34\u0e07\u0e34 New Scratch Proof \u0e14\u0e39\u0e02\u0e39 \u0e31\u0e49\u0e49\ufffd\u0e19\u0e15\u0e2d\u0e19\u0e01\u0e32\u0e23\u0e15\u0e34\u0e34\u0e14\u0e15\u0e31\u0e49\u0e49\u0e07\ufffd \u0e14\u0e39\u0e23\u0e39 \u0e39\u0e1b\u0e39 \u0e2d\u0e49\u0e49\u0e32\u0e07\u0e2d\u0e34\u0e34\u0e07 *Please be advised that patterns and colors in the photograph may differ from the actual product. Installation Instructions Reference Dimensions : (W) 1220 mm X (L) 50000 mm scan for more info 51","MARBLE\/STONE Marble\/Stone : LX-ML-67 *\u0e23\u0e39\u0e39\u0e1b\u0e41\u0e1a\u0e1a\u0e41\u0e25\u0e30\u0e2a\u0e35\u0e43\u0e35 \u0e19\u0e20\u0e32\u0e1e\u0e16\u0e48\u0e32\u0e48 \u0e22\u0e2d\u0e32\u0e08\u0e41\u0e15\u0e01\u0e15\u0e48\u0e48\u0e32\u0e07\u0e08\u0e32\u0e01\u0e1c\u0e25\u0e34\u0e15\u0e34 \u0e20\u0e31\u0e31\u0e13\u0e11\u0e4c\u0e4c\u0e08\u0e23\u0e34\u0e07\u0e34 *Please be advised that patterns and colors in the photograph may differ from the actual product. 52","MARBLE \/ STONE MARBLE\/STONE FEEL THE REALISTIC SENSE OF TOUCH OF EUROPEAN-STYLE LUXURY MARBLE AND STONE.","MARBLE \/ STONE FEEL THE REALISTIC SENSE OF TOUCH OF EUROPEAN-STYLE LUXURY MARBLE AND STONE. LX-ML-67 BEST BIANCO CARRARA (WHITE) LX-ML-56 BEST TRAVERTINE (WHITE) LX-ML-23 STONE Dimensions : (W) 1220 mm X (L) 50000 mm \u0e43\u0e2b\u0e21\u0e48\u0e48 \u0e17\u0e19\u0e23\u0e2d\u0e22\u0e02\u0e35\u0e35\u0e14\u0e02\u0e48\u0e48\u0e27\u0e19 \u0e14\u0e39\u0e02\u0e39 \u0e31\u0e49\u0e49\ufffd\u0e19\u0e15\u0e2d\u0e19\u0e01\u0e32\u0e23\u0e15\u0e34\u0e34\u0e14\u0e15\u0e31\u0e49\ufffd\u0e07\u0e49 \u0e14\u0e39\u0e23\u0e39 \u0e39\u0e1b\u0e39 \u0e2d\u0e49\u0e49\u0e32\u0e07\u0e2d\u0e34\u0e34\u0e07 New Scratch Proof Installation Instructions Reference scan for more info 54","Marble\/Stone : LX-ML-58 LX-ML-57 TRAVERTINE (WARM GRAY) LX-ML-58 TRAVERTINE (DARK GRAY) LX-ML-75 SAND STONE *\u0e23\u0e39\u0e1b\u0e39 \u0e41\u0e1a\u0e1a\u0e41\u0e25\u0e30\u0e2a\u0e35\u0e35\u0e43\u0e19\u0e20\u0e32\u0e1e\u0e16\u0e48\u0e32\u0e48 \u0e22\u0e2d\u0e32\u0e08\u0e41\u0e15\u0e01\u0e15\u0e48\u0e32\u0e48 \u0e07\u0e08\u0e32\u0e01\u0e1c\u0e25\u0e34\u0e34\u0e15\u0e20\u0e31\u0e13\u0e31 \u0e11\u0e4c\u0e4c\u0e08\u0e23\u0e34\u0e34\u0e07 \u0e43\u0e2b\u0e21\u0e48\u0e48 \u0e17\u0e19\u0e23\u0e2d\u0e22\u0e02\u0e35\u0e35\u0e14\u0e02\u0e48\u0e27\u0e48 \u0e19 \u0e14\u0e39\u0e39\u0e02\u0e31\u0e49\u0e19\ufffd\u0e49 \u0e15\u0e2d\u0e19\u0e01\u0e32\u0e23\u0e15\u0e34\u0e34\u0e14\u0e15\u0e31\u0e49\ufffd\u0e49\u0e07 \u0e14\u0e39\u0e23\u0e39 \u0e39\u0e39\u0e1b\u0e2d\u0e49\u0e49\u0e32\u0e07\u0e2d\u0e34\u0e07\u0e34 *Please be advised that patterns and colors in the photograph may differ from the actual product. New Scratch Proof Installation Instructions Reference Dimensions : (W) 1220 mm X (L) 50000 mm scan for more info 55","SPECIALTY SPECIALIZED FLAME RETARDANT INTERIOR FILM ) of Japanese Ministry of Japanese Non-Flammable Test LX Hausys offers interior film certified for non-flammable and eco-friendly (F Land, Infrastructure,Transport and Tourism. Japanese non-flammable Certification (limited patterns only) Interior film on non-combustible Interior film on aluminum Interior film on steel materials materials (gypsum board) materials Chinese Flame Resistance LX Hausys Interior Film has the non-combustible rating(A2) according to Article 9 of the Fire Control Law of the People's Republic of China. Chinese non-combustible rating (A2) Report (limited patterns only) EXPERIENCE IT FOR YOURSELF 50 mm x 30 mm 50 mm x 30 mm Create scratches on the sample surface, and remove them by wiping with hot water. *Caution: Excessive exposure to heat may cause permanent damage due to film deformation. (Optimal surface temperature: 80 ~ 120 \u0e4d) 56","MODERNFORM TESTING LAB SCRATCH PROOF \u0e17\u0e14\u0e2a\u0e2d\u0e1a\u0e23\u0e2d\u0e22\u0e02\u0e39\u0e14\u0e02\u0e14\u0e35 \u0e14\u0e27\u0e49 \u0e22\u0e14\u0e19\u0e34 \u0e2a\u0e2d \u0e23\u0e30\u0e14\u0e31\u0e31\u0e1a\u0e04\u0e27\u0e32\u0e21\u0e41\u0e02\u0e47\u0e07\u0e47 \u0e02\u0e2d\u0e07\u0e14\u0e34\u0e19\u0e34 \u0e2a\u0e2d \u0e08\u0e32\u0e01\u0e2d\u0e48\u0e2d\u0e48 \u0e19\u0e44\u0e1b\u0e41\u0e02\u0e47\u0e07\u0e47 9B 8B 7B 6B 5B 4B 3B 2B B F H 2H 3H 4H 5H 6H 7H 8H 9H \u0e2d\u0e48\u0e48\u0e2d\u0e19 ( soft ) ....................................................................................... \u0e41\u0e02\u0e47\u0e47\u0e07 ( hard ) CROSS CUT TEST \u0e17\u0e14\u0e2a\u0e2d\u0e1a\u0e01\u0e32\u0e23\u0e22\u0e36\u0e36\u0e14\u0e40\u0e01\u0e32\u0e30\u0e1c\u0e34\u0e34\u0e27 ASTM Class : 5B ASTM Class : 4B ASTM Class : 3B ASTM Class : 2B ASTM Class : 1B ASTM Class : 0B \u0e17\u0e14\u0e2a\u0e2d\u0e1a\u0e41\u0e23\u0e07\u0e14\u0e36\u0e36\u0e07\u0e1c\u0e34\u0e34\u0e27\u0e2b\u0e19\u0e49\u0e49\u0e32 Tensile \u0e17\u0e14\u0e2a\u0e2d\u0e1a\u0e14\u0e36\u0e36\u0e07\u0e1c\u0e34\u0e34\u0e27 \u0e41\u0e25\u0e30\u0e2d\u0e48\u0e48\u0e32\u0e19\u0e41\u0e23\u0e07\u0e14\u0e36\u0e36\u0e07 ( \u0e2b\u0e19\u0e48\u0e48\u0e27\u0e22 \u0e40\u0e1b\u0e47\u0e47\u0e19 Newton ) \u0e21\u0e32\u0e15\u0e23\u0e10\u0e32\u0e19\u0e01\u0e32\u0e23\u0e17\u0e14\u0e2a\u0e2d\u0e1a | TESTING STANDARD ASTM D 3359 , ISO 1584-2020 , ASTM D 3363 57","CERTIFICATION & TEST REPORT SFIARFEETY LX Hausys Interior film BENIF\u2019s fire safety is recognized by earning the global fire certificationsa INTERIOR SPACE KFI Certification It is Korean Flame Retardant Certificate. LX Hausys uses fire retardants approved by Korea Fire Institute, and only products have passed the flame retardant test can be released to the market. (Certificates are issued for products that pass the test CE Certification It is the stability verification standard of European Union(EU). The product\u2019s stability within the European market has been substantiated by passing not only the flame spread rate test but also formaldehyde and heavy metal tests. (Certification Number 1121-CPR-KA5008, limited to flame retardancy product) UL flammability and smoke diffusion test (UL723) examination Our products have passed the flammability and smoke diffusion test (UL723) conducted by the global safety certification organization UL (Underwriters Laboratories). (Test report number R26170) FERCIOE-NDLY LX Hausys is constantly striving to minimize substances harmful to the human body and the environment, considering the safety and environment of customers and builders. HUMAN-FRIENDLINESS Eco-Friendly construction materials certification We have obtained the highest level in the verification of harmful substances in building materials in accordance with the Healthy Building Material Certification (HB Mark) established by the Korea Air Cleaning Association However, please note that the safety of these materials in contact with food has not been verified. Also, there are some colors that have not been certified, so please check the certification document for more information. (Group Standard Certification No. HB2679G22-01) The European textile product quality certification This certification verifies the absence of approximately 200 harmful substances in products that come into contact with skin, such as general products, bedding, toys, and interior materials. BENIF\u2019s Solid colors were the first in the industry to obtain a 1st class certification (Baby Class) under this standard, which confirms their suitability for use in clothing and toys for infants and toddlers under 3 years of age. (Certification No. SE025 164519 TESTEX) ENVIRONMENT-FRIENDLINESS Environmental Product Declaration (EPD) It is a system that evaluates the environmental impact of the entire process, including raw materials, production, distribution, use, and disposal of certified products, and encourages environmental improvements. BENIF Wood (CW, DW, FW, SW) has obtained this certification and is continuously striving for environmental improvement. (Environmental Product Certification No. 2020-483) Low Carbon Product Certification If the carbon footprint value is equal to or less than the maximum allowable carbon emissions (average carbon emissions of environmentally friendly labeled products of the same type), or if the minimum carbon reduction rate is achieved, it is certified by the Korea Environmental Industry & Technology Institute. BENIF Solid (RS, RGM) has obtained this certification and is widely used as an environmentally friendly product. (Environmental Product Certification No. 2019-030) 58","APPLICATION INSTRUCTIONS \u0e04\u0e33\u0e33\ufffd\u0e41\u0e19\u0e30\u0e19\u0e33\u0e33\ufffd\u0e43\u0e19\u0e01\u0e32\u0e23\u0e15\u0e34\u0e34\u0e14\u0e15\u0e31\u0e49\u0e49\ufffd\u0e07 1. Preliminary work \u2022 It is necessary to check the type and condition of the adherend (MDF, etc.) on which the film is applied to see if any problems may occur during installation. - In the case of MDF, it is recommended to use MDF with uniform density, as the difference in installation adhesion and flame retardant performance \u0e01\u0e32\u0e23\u0e15\u0e23\u0e27\u0e08\u0e40\u0e0a\u0e47\u0e04\u0e47 \u0e02\u0e31\u0e49\ufffd\u0e49\u0e19\u0e15\u0e49\u0e19\u0e49 occurs depending on the density. - The painted surface should be cleaned with alcohol to remove contaminants and checked for damage by the solvent. The uneven areas should be polished with sandpaper after putting treatment and foreign matters should be removed with a dust brush. - For iron plates, after removing contaminants from the surface with alcohol or lacquer, the uneven areas caused by welding should be treated by puttying. Foreign matters should be removed with a dust brush after polishing the surface with sandpaper. \u2022 It is necessary to perform preliminary inspection on whether the product selected by the consumer has defects. (pattern name, appearance, etc.) \u2022 Film installation should be carried out after carpentry work and before painting and wallpapering. 2. Surface Pre-work \u2022 The cross-section (cutting) part of the adherend (MDF, etc.) where the film will be applied must be sufficiently polished with sandpaper. \u0e07\u0e32\u0e19\u0e40\u0e15\u0e23\u0e35\u0e22\u0e35 \u0e21\u0e1e\u0e37\u0e49\u0e19\ufffd\u0e49 \u0e1c\u0e34\u0e34\u0e27 - In particular, in the case of wood (MDF, PB, etc.), smoothness of the bent and joint parts is important. Therefore, if the surface condition is rough after inspecting in advance, it must be sufficiently polished with sandpaper or putty treatment before installation. 3. Primer Treatment \u2022 For the primer treatment, the cut surface of wood (MDF, PB, etc.) among the adherends has a high primer absorption rate, so the primer should be \u0e07\u0e32\u0e19 \u0e44\u0e1e\u0e23\u0e4c\u0e40\u0e4c \u0e21\u0e2d\u0e23\u0e4c\u0e4c applied 2-3 times. Overlapping is done after the primer applied before has been completely dried. 4. Application \u2022 During construction, the cut surface of the film should not be visible as much as possible. Methods \u2022 Film should be applied in a way that the substrate is not visible as much as possible. \u2022 Color differences may occur between product lots, so it is necessary to sort the lots for installation. \u0e27\u0e34\u0e34\u0e18\u0e35\u0e01\u0e35 \u0e32\u0e23\u0e15\u0e34\u0e14\u0e34 \u0e15\u0e31\u0e49\u0e07\u0e49\ufffd \u2022 The site temperature should be maintained at 15~25C from 72 hours before construction to 48 hours after construction. In winter, if the product is left outside, adhesion may decrease due to a drop in temperature. 5. Application SW, EL, - These products do not have a surface film layer but only did surface treatment. If you strongly rub the corners with wool felt or Instructions EL, PL cotton gloves, the printed layer may be damaged, so please use with caution. for Specific - Due to the surface treatment layer, it may slip when film is overlapped. Therefore, the construction should be done after applying products NS the water-based primer PM-04 undiluted solution and drying it sufficiently. \u0e04\u0e33\ufffd\u0e33 \u0e41\u0e19\u0e30\u0e19\u0e33\u0e33\ufffd\u0e01\u0e32\u0e23\u0e15\u0e34\u0e34\u0e14\u0e15\u0e31\u0e49\u0e49\u0e07\ufffd - This film features deep embossing to realize the texture of brick and concrete. \u0e2a\u0e33\ufffd\u0e33 \u0e2b\u0e23\u0e31\u0e31\u0e1a\u0e1f\u0e34\u0e34\u0e25\u0e4c\u0e4c\u0e21\u0e41\u0e1a\u0e1a\u0e1e\u0e34\u0e34\u0e40\u0e28\u0e29 - In the case of overlapping construction, the adhesive strength decreases due to the depth of the emboss, so apply a primer after attaching it with masking tape. 6. Others - After the primer treatment, the product must be sufficiently compressed to the surface for stability in construction, so please pay attention to this point. \u0e2d\u0e37\u0e48\ufffd\u0e48\u0e19\u0e46 NATURE -Butt joint construction is required. During overlapping construction, there is a risk of peeling of the overlapped area due to the CRAFT embossing and surface treatment layer. -Since it has a special multi-layer product structure, if the surface is heated during construction, it may cause delamination or surface wrinkles, so curved surfaces cannot be constructed. - You need to cut and construct in consideration of fitting connection between patterns. If it is cut according to the printing scale on the releasing surface, the alignment between the patterns will not be possible. - There is no surface film layer, if you strongly rub the corners with wool felt, cotton gloves, etc., the printing layer may be damaged, so please use with caution. \u2022 Film construction must be carried out according to the construction standards of the specification. \u2022 For construction methods and adherends (MDF, etc.), in case of the construction on a different type of adherend from the specifications, you must contact LG Hausys or a vendor to confirm the possibility of construction. - Air bubbles may occur during construction on acrylic adherends, so please check with LG Hausys or a vendor before construction \u2022 In case of the film application, you should use the water-based primer PM-04 of LG Hausys. 59",""]
Search
