AH_A4.compressed.pdf;sid=b_ZsS5VjM9pmS8IoUnptupVpTXeqAhGVogvovVie

Door Hinges Rising/Falling Hinges Lift Off Rising Hinge Features 3 For Wooden Frames For Flush Doors Size Handling Article No. With Straight Pin 102 x 76 x 2 mm DIN Left 926.79.003 102 x 76 x 2 mm DIN Right 926.79.103 Technical Data Maximum Door Weight for 3 Hinges 40 kg Knuckle Diameter 16 mm Material Thickness 2 mm Lift off Falling Hinge We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Features Size Handling Article No. For Wooden Frames 102 x 76 x 2 mm DIN Left 926.79.203 For Flush Doors 102 x 76 x 2 mm DIN Right 926.79.303 With Straight Pin Technical Data Maximum Door Weight for 3 Hinges 40 kg Knuckle Diameter 16mm Material Thickness 2mm New products and systems www.hafeleindia.com AH 3.11

Door Hinges Features For Flush Interior Doors Concealed Hinges Maximum Opening Angle 180 Concealed SOSS Hinge For Wooden Doors Suitable for DIN Left & DIN Right Hand 3 Technical Data Material : Zinc Alloy Finish : Polished Chrome Size Door Thickness Article No. 12.70x60.30 mm 19-24 mm 341.18.223 15.8x69.85 mm 22-26 mm 341.18.225 19.05x95.25 mm 28-34 mm 341.18.227 25.4x117.48 mm 35-38 mm 341.18.229 28.58x117.48 mm 41-45 mm 341.18.231 e erence ta le or calculating the nu er o re uired door hinges a ple A door 700 mm wide that weighs 45 kg and has a thickness of 1 would re uire three concealed hinges Article. No. 341.18.231. Article No. Chrome Polished 341.18.223 .225 .227 .229 .231 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). AH 3.12 New products and systems www.hafeleindia.com

Door Hinges Features For flush interior doors Concealed Hinges For For concealed fixing For Height 1 mm, side 1 mm, depth 1 mm KUBICA K6200 For 180° opening angle Three-dimensionally adjustable For Material : Zinc Alloy Technical Data Max. door weight with 3 hinges: 40 kg, 3 Size: 95 mm Min. door thickness: 30 mm Door width: 600-1000 mm Door height: 2100-2700 mm Fixing Diameter of cutter: 12 mm Cutting height: 95 mm Finish Article No. Chrome Matt 927.91.544 KUBICA K6700 Three-dimensionally adjustable We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Features For wooden frames M For flush interior doors For concealed fixing Height 1.5 mm, side 1 mm, depth 1 mm 180° opening angle Material : Zinc Alloy Technical Data Max. door weight with 3 hinges: 60 kg, Size: 111.5 mm Min. door thickness: 40 mm Door width: 600-1000 mm Door height: 2100-2700 mm Fixing Diameter of cutter: 12 mm Cutting height: 111.5 mm Finish Article No. Chrome Matt 927.91.554 New products and systems www.hafeleindia.com AH 3.13

Door Hinges CCoonncceeaaleldedHiHnginesges Concealed mortise hinge TECTUS TE 540 3D A8 Features or ra es ade o wood steel or alu iniu or doors with dou ling ele ents up to or lush doors or concealed ounting uita le or IN le t hand and IN right hand Technical data a . opening angle 1 0 in. door thic ness 0 a . door weight 100 g with 2 hinges 3 Ad ust ent acilit ontinuousl ad usta le side and height and closing pressure 1 outer it 2 3 Installation To wooden loc ra es With ounting plate to wooden lining ra es With receiver to steel ra es Preparing installation We reserve tWhee rriegshetrtvoe talhteerrisgphte tcifoicalattieronsspewicitfihcoauttionnosticwiet(hSoEutAnAorticchiet (ecHtIuNralArcHhairtdecwtaurreal2H0a1r5)d.ware 2015). aterial inish Article No. teel cover plates plastic coated Stainless steel coloured 2 .1 . 0 Alu iniu lin Silver coloured 2 .1 . 21 Special Order AH 3.A3H63.14 NeNwepwropdroudcutsctasnadnsdysytesmtesmws:wwww.hwa.fhealefeinled.ciao.mcom

Door Hinges CCoonncceealaeldedHiHnginesges Concealed mortise hinge TECTUS TE 640 3D A8 Features or ra es ade o wood steel or alu iniu or doors with dou ling ele ents up to or lush doors or concealed ounting uita le or IN le t hand and IN right hand Technical data a . opening angle 1 0 in. door thic ness 0 a . door weight 1 0 g with 2 hinges Ad ust ent acilit ontinuousl ad usta le 3 side and height and closing pressure 1 3 outer it 2 Installation To wooden loc ra es With ounting plate to wooden lining ra es With receiver to steel ra es We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Preparing installation We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). aterial inish Article No. teel cover plates plastic coated Stainless steel coloured 2 .1 .50 Alu iniu lin Silver coloured 2 .1 .521 Special Order AH A3H.3.715 NeNwewprpordoudcutcstsanadndsyssytsetmems sw: wwww.wha.hfaeflelien.dcioam.com

4 Door Closers 4 Door Closer

Door Closers Door Closers Floor Springs Door Closer Accessories Door Closers Intermediate pivot Door selector Overhead Position Door Closers Feature Overhead sliding door closer for lightweight sliding doors Z
$JM
PNDIB
DI
>JH=DI<ODJI
RDOC
AGJJM
NKMDIB Z
2J
KM@Q@IO
=@I?DIB
JA
Q@MT
CDBC
?JJMN Z
2JK
KDQJO
<MH
<I?
AGJJM
NKMDIB
<MH
I@@?
OJ
=@
<GDBI@?
RDOC
OC@
CDIB@
>@IO@M
=T
<I
JAAN@O
JA

HH Z
+<O@MD<G
GPHDIDPH Version Cat. No. DIN left hand    DIN right hand    4 4 Features

Door Closers Contents Overhead position door closers Door closer StarTec...................................................................4.8 Jam concealed door closer .....................................................4.18 Accessories..............................................................................4.20 Overhead sliding door closer for.................................................4.21 lightweight sliding doors Floor springs Floor springs 120kg.................................................................4.22 Floor springs 300kg.................................................................4.23 4 Heavy Duty Floor springs 600kg...............................................4.24 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). AH 4.2 New products and systems www.hafeleindia.com

Door Closers Information Door closer The door closers in this catalogue are divided into the following groups: verhead door closers with slide channel ar or as concealed version loor springs Door closer functions in the door operating range 4 a Backcheck c Closing delay 4 With ac chec the swing o a orcefully opened door The closing delay increases the closing ti e so that or e a ple ( anuall or or e a ple gusts o wind) is reduced. persons carr ing luggage or ul ite s others with pra s a age to the door or wall are therefore ini ised or eli inated. elderl persons etc. have suf icient ti e to wal through the door. b Closing speed d Latching action he e act setting o the closing speed guarantees a controlled The latching action controls the closing of the door and ensures the lock closes reliably. Therefore the door closer Increases closing of the door leaf. the speed of the door. The hydraulic latching action is reducing the speed of the door to achieve a softer closing of the door. We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 4.4AH New products and systems www.hafeleindia.com 4.3New products and systems: www.hafele.com AH

DIIDnnooffoooorrrrmmCClalaoottssiioeoerrnnss Fixing types Standard installation Overhead installation Parallel arm installation (Door leaf installation) on the pull side (Transom fixing) on the push side On push side 4 4 Standard installation Overhead installation (Door leaf installation) on the pull side (Transom fixing) on the pull side We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Standard installation Overhead installation (Door leaf installation) on the push side (Transom fixing) on the push side 4 . 4AHNew products and systems: www.hafele.com 4.5New products and systems www.hafeleindia.com AH

Door Closers Information Standards relevant to the architectural hardware industry Standards There are two standards currently in existence for door closing devices: EN 1154: 1997 - Controlled door closing devices EN 1154: 1997 - Mechanical closers - requirements and test methods. EN 1155; 1997 - Electronically controlled closers These standards are shown in summary below in detail at the back Scope - The standard covers all controlled surface mounted, con- of this catalogue. Attention should be paid to Digit 3, which deals with cealed,or transom mounted closers as well as both single and the power size and door width. Where applicable we have shown the double action floor springs. relevant classification code using DHF graphic icons in this section. Classification 4 Digit 1 - Category of use Digit 3 - Test door mass/size For all internal and external doors for use by the public, and Seven test door mass grades and related door closer power others,with little incentive to take care, i.e. where there is some sizes are identified according to below table of this standard. chance of misuse of the door. Where a door closer provides a range of power sizes both Grade 3: For closing doors from at least 105° open the minimum and maximum sizes shall be identified. 4 Grade 4: For closing doors from 180° open Note 1: Grade 4 classification assumes standard installation TEST DOOR MASS AND RECOMMENDED DOOR WIDTHS according to the manufacturer's instructions. Note 2: For applications subject to extremes of abuse, or for par- ticular limitations of opening angle, door closers Power size of Max. mass of Width of test door incorporating backcheck function or provision of a separate door closer hinged leaf leaf stop should be considered. 1 20 kg <750 mm 2 40 kg 850 mm Digit 2 - Number of test cycles 3 60 kg 950 mm Only one test duration is identified for the door closing 4 80 kg 1,100 mm device manufactured to this standard: Grade 8: 500,000 cycles 5 100 kg 1,250 mm We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015).6 120 kg 1,400 mm We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 7 160 kg 1,600 mm Digit 4 - Fire behaviour Digit 6 - Corrosion resistance Two grades of fire behaviour are identified for door closing Five grades are identified according to EN 1670: devices manufactured to this standard: Grade 0: No defined corrosion resistance Grade 0: Not suitable for use on fire/smoke door assemblies Grade 1: Low resistance Grade 1: Suitable for use on fire/smoke door assemblies, Grade 2: Moderate resistance subject to satisfactory assessment of the contribution of the Grade 3: High resistance emergency device to the fire resistance of specified Grade 4: Very high resistance fire/smoke door assemblies Example Digit 5 - Safety All door closers are required to satisfy the Essential The following marking denotes a closer capable of opening to Requirement of safety in use contained in the Construction at least 105°, and with a range of power sizes from size 2 to size Products Directive by the EU. Therefore only Grade 1 is 5. Note that as the 4 th digit is zero, such a closer would not be identified suitable for fire door use. :3:8:2/5:0:1:0 4.6AH New products and systems www.hafeleindia.com 4.5New products and systems: www.hafele.com AH

Door Closers d) Control regulators shall be either concealed or operable only by Information means of a tool. Fire resisting doors e) The design of a door closer shall be such that it is not possible to inhibit its closing action in any way without the use of a tool. EN 1154 makes the following recommendations as to the feature considered necessary for such devices when they are fitted f) Any incorporated delayed action function shall be capable of to fire and smoke resisting doors. adjustment to less than 25 seconds between the door closing angle of 120° and the end of the delay zone. a) The door closer when installed in accordance with the manu- facturer's installation instruction shall be capable of closing the g) The door closer representative of its model shall have been test door from any angle to which it may be opened. incorporated in a door assembly that has satisfied the appropriate criteria of a fire test. The test shall have been on a b) Due to their low closing moments, door closers sizes 1 and 2 full size assembly in accordance with EN 1634-1. are not considered suitable for use on fire/smoke resisting door assemblies. Door closers with adjustable closing force shall be capable of adjustment to at least power size 3. c) The door closer shall not include a hold open device unless it is electrically powered device in accordance with EN 1155. EN 1155: 1997 - Electrically powered hold open Scope 4 devices for swing doors - requirements and test methods The standard specifies requirements for separate electrically powe- 4 red hold-open devices and also for hold-open mechanisms incor- porated in a door closer. Whilst these devices may incorporate smoke or fire detection elements, the performance of these parti- cular elements is outside the scope of EN 1155. Classification Digit 3 - Test door mass/size Five test door mass grades and related hold-open power Digit 1 - Category of use sizesare identified according to below table of this standard. Only one category of use is identified for electrically powered Where an electrically powered hold-open device is suitable hold-open devices. for a range of power sizes both the minimum and the Grade 3: For all internal and external doors for use by the maximum sizes shall be identified. public,and others, with little incentive to take care, i.e. where there is some chance of misuse of the door. We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015).TEST DOOR MASS AND RECOMMENDED DOOR WIDTHS Hold-open power Max. mass of Width of test size hinged leaf kg door leaf mm 3 60 kg 950 mm Digit 2 - Number of test cycles 4 80 kg 1,100 mm Two test durations are identified for devices manufactured to this European standard: 5 100 kg 1,250 mm Grade 5: 50,000 cycles. For all stand alone electrically powered hold open devices 6 120 kg 1,400 mm Grade 8: 500,000 cycles. For all stand alone electrically powered hold open and free-swing door closers and 7 160 kg 1,600 mm devices that contain operating arms. Digit 4 - Fire behaviour Only one grade of fire resistance is identified for the electrically powered hold-open devices Grade 1: Suitable for use on fire/smoke door assemblies, subject to satisfactory assessment of the contribution of the emergency device to the fire resistance of specified fire/smoke door assemblies. 4 . 6AHNew products and systems: www.hafele.com 4.7New products and systems www.hafeleindia.com AH

Grade 0: No defined corrosion resistance Grade 1: Low resistance Grade 2: Moderate resistance DoorGrCadelo3:sHeigrhsresistance InforGmradea4t:iVoerny high resistance CE conformity Fire resistance and smoke control Where a door closing device has a CE certificate of conformity, this Tested for fire resistant and smoke control doors. 4 will be shown thus. It is stated in 8300 that all fire doors must The use of a hold-open device on fire resistant have closing devices that are CE marked. and smoke control doors are not permitted or they are not tested for resistance and smoke control We give below a guide to the terminology used in connection with Delayed action door closing devices. The closing speed of the door is reduced to minimal or the door stops, for a preset period, to allow passers-by Backcheck sufficient time to pass through the door opening. i.e. Elderly A device built into the closer that checks the outward persons, Hospital staff with beds, etc. swing of the door. The backcheck damping is inversely proportional to the speed of the outward swing of the door. Hold open It should not be regarded as a door stop. This is a device to enable the closer to be held in the open posi- tion, usually at 90º, but some are variable in the opening degree. Closing speed These closers must not be used on fire doors. The speed with which the door is closed. Normally (except where they are electronically controlled to close when the adjustable. fire alarm is sounded). Closing force Door stops The power that the closer exerts to close the door. Always use a door stop, where practicable, whether a Measured in the EN standard from 1-6. See table below. closer has a backcheck or not. This may take the form of a floor We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015).mounted version, wall/skirting mounted version or built-in as found 4 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).with guide rail closers. The positioning of the stop is also impor- Size Max. door width mm Min. closing moments N.m tant, and must be at least 66% (2/3rds) the door width away from the hinge, otherwise the stop acts as a fulcrum and could damage 1 750 9 the door, the frame and the hinges. Where there is a maximum an- 2 850 13 gle of opening stated the stop must be positioned at that point, 3 950 18 otherwise damage to the closer will occur. 4 1100 26 5 1250 37 Note 6 1400 54 Please ensure that the correct closing device is the appropriate one for the job it is intended to do and that it is the It should be noted that size 3 is the minimum requirement for fire correct size. Too many closers are under specified, purely in an doors. effort to reduce costs. Latching action The door movement becomes accelerated in the last few degrees of closing, in order to be able to overcome any resistance, such as seals, latch bolts, etc. AH 4.8 New products and systems: www.hafele.com New products and systems www.hafeleindia.com AH 4.7

Door Closers EN 1154 Overhead Position Door Closers HS 1100 - Surface Mounted StarTec Features Latching action valve adjustable Closing speed valve adjustable Backcheck valve adjustable Suitable for DIN right hand and DIN left hand Closing force acccording to EN 1154 Technical data Closing force size EN 2/3/4 Door width size 850–1100 mm Max. door weight 45-60 kg Max. door opening angle 180º Hold open angle 70–145º 4 Standard installation Overhead installation We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). (door leaf installation) on pull side (transom fixing)on push side Version Silver colour DCL 110 with standard arm 931.84.749 Version Article No. HDSCL1110100 wwiitthh shtoalndd-oaprdenaramrm F 9319.8341..78449.759 PHaScki1ng1:010pcw. ith hold-open arm F 931.84.759 AH 4.8 New products and systems www.hafeleindia.com

Door Closers EN 1154 Overhead Position Door Closers Door closer DCL 11 StarTec Features Tested to EN 1154 Tested to confirm with CE requirements Hydraulic latching action valve adjustable Closing speed valve adjustable Suitable for DIN right hand and DIN left hand Technical data EN3 4 Closing force size 850–950 mm Door width size 60 kg Max. door weight Approx. 180º Max. door opening angle 70–145° Hold open angle We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Standard installation Overhead installation (door leaf installation) on pull side (transom fixing)on push side Version Article No. DCL 11 with standard arm F 931.84.649 DCL 11 with hold-open arm F 931.84.659 New products and systems www.hafeleindia.com AH 4.9

Door Closers EN 1154 Overhead Position Door Closers Door closer DCL 15 StarTec Features • Tested to EN 1154 • Tested to conform with CE requirements • Variable closing force by installation position of body • Hydraulic latching action valve adjustable • Closing speed valve adjustable • On request available with backcheck • Suitable for DIN right hand and DIN left hand Technical data Closing force size EN 2/3/4 Door width size 750–1,100 mm Max. door weight 80 kg 4 Max. door opening angle Approx. 180º Hold open angle 70–150º Standard installation Overhead installation Parallel arm installation We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). (door leaf installation) (transom fixing) on push side on pull side on push side Version Article No. DCL 15 with standard arm F 931.84.629 DCL 15 with hold-open arm F 931.84.639 AH 4.10 New products and systems www.hafeleindia.com

Door Closers EN 1154 ODvoeorhr eCalodseProssition Door Closers Overhead Position Door Closers Door closer DCL 21 StarTec Door closer DCL 21 StarTec Features Variable closing force by installation position of body Hydraulic latching action valve adjustable Closing speed valve adjustable With fixed backcheck With interlocking hold-open device 4 Suitable for DIN right hand and DIN left hand 4 Closing force according to EN 1154 Technical data Closing force size EN 2/3/4 Door width size 750–1,100 mm Max. door weight 80 kg Max. door opening angle Approx. 140º Hold open angle 70–140º We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Standard installation Overhead installation Parallel arm installation We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). (door leaf installation) (transom fixing) on push side on pull side on pull side Version Article No. 931.84.129 DCL 21 with hold-open function Special Order New products and systems: www.hafele.com AH 4.13 New products and systems www.hafeleindia.com AH 4.11

DDoooorrCClolosseerrss EN 1154 OOvveerrhheeaaddPPoossiittiioonnDDoooorrCClloosseerrss Door closer DCL 83 StarTec Features CAM Efficient Tested to EN 1154 Tested to conform with CE requirements Closing force valve adjustable Latching action valve adjustable Closing speed valve adjustable 4 Suitable for DIN right hand and DIN left hand Closing force according to EN 1154 Technical data Closing force size EN2–EN4 Door width size 750–1,100 mm 4 Max. door weight 80 kg Max. door opening angle 115º Max. hold open angle 115º Standard installation Overhead installation We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). (door leaf installation) on pull side (transom fixing) on pull side We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Version Article No. DCL 83 without hold-open function 931.84.289 DCL 83 with hold-open function 931.84.299 Special Order AH 4A.H14.12 NewNepwropdruocdtuscatnsdansdysstyesmtesmwsw: ww.hwaf.healefienled.icao.cmom

Door Closers EN 1154 Overhead Position Door Closers Door Closer DCL 51 StarTec Features 4 Tested to EN 1154 Tested to conform with CErequirements Closing force adjustable by valve Hydraulic latching action valve adjustable Closing speed valve adjustable Backcheck valve adjustable Technical data Closing force size EN2–EN5 Door width size 750–1,250 mm Max. door weight 110 kg Max. door opening angle Approx. 180º Hold open angle 70–150º We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Version Article No. DCL 51 with standard arm F 931.84.829 DCL 51 with standard arm with hold open F 931.84.669 Standard installation Overhead installation Parallel arm installation (door leaf installation) (transom fixing) on push side on pull side on push side New products and systems www.hafeleindia.com AH 4.13

DOODoovvooeerrrrhhCCeellooaasdsdeerPrPssoossititioionnDDoooor rCClolosesresrs EN 1154 Door closer DCL 55 StarTec Features Tested to EN 1154 Tested to conform with CE requirements losing orce adjustable by valve H draulic latching action valve ad usta le losing speed valve ad usta le ac chec valve ad usta le uita le or IN right hand and IN le t hand Technical data 4 losing orce size EN2–EN6 Door width size 750–1,400 mm a . door weight 120 g 4 a . door opening angle 180º Hold open angle 70–150º Standard installation Overhead installation We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). (door lea installation) on pull side (transo i ing)on push side Version Article No. DCL 55 with standard arm 931.84.769 931.84.819 55 with hold open ar pecial rder AH 4.14 New products and systems www.hafeleindia.com AH 4.16 New products and systems: www.hafele.com

Door Closers EN 1154 OCovenrcheeaaleddPDosoiotiroCnlDosoeorrsClosers Door closer DCL 34 EN3 StarTec Features Tested to EN 1154 Tested to confirm with CE requirements Door closer for concealed installation in the door leaf or frame Hydraulic latching action valve adjustable Closing speed valve adjustable Suitable for DIN right hand and DIN left hand Technical data Closing force size EN3 4 Door width size 850–950 mm Max. door weight 60 kg Max. door opening angle 120º Max. hold open angle 115º Min. door panel thickness 40 mm 4 Version Article No. DCL 34 without hold-open function 931.84.049 DCL 34 with hold-open function 931.84.279 Special Order We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). 4.30AH New products and systems www.hafeleindia.com 4.15New products and systems: www.hafeleA.Hcom

Door Closers EN 1154 COovnecrheeaaleddPDoosoitrioCnloDsoeorrs Closers Door closer DCL 33 StarTec Features Tested to EN 1154 Cam-action Tested to confirm with CE requirements Door closer for concealed installation in the door leaf or frame Closing force valve adjustable Hydraulic latching action valve adjustable Closing speed valve adjustable Suitable for DIN right hand and DIN left hand Technical data Closing force size EN2–EN4 4 Door width size 750–1,100 mm Max. door weight 80 kg Max. door opening angle 115º Max. hold open angle 115º 4 Min. door panel thickness 42 mm Version Article No. DCL 33 without hold-open function F 931.84.039 DCL 33 with hold-open function F 931.84.269 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). 4.16New products and systems: www.hafele.com 4.29New products and systems www.hafeAlHeindia.com AH

Door Closers EN 1154 Concealed Door Closers Concealed door closer HS 3000 Features H draulic latching action valve ad usta le losing speed valve ad usta le With fi ed ac chec With interloc ing hold open device (not fire rated) uita le or IN right hand and IN le t hand losing orce according to N 115 Technical data EN2 EN3 EN4 Closing force size 850mm Door width size 45kg 950mm 1,100mm Max. door weight Approx. 120º Max. door opening angle 60kg 80kg Approx. 120º Approx. 120º 4 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Version Article No. HS 3000 EN 2 with hold-open device 931.84.429 HS 3000 EN 3 with hold-open device F 931.84.419 HS 3000 EN 4 with hold-open device 931.84.439 New products and systems www.hafeleindia.com AH 4.17

Door Closers EN 1154 Concealed Door Closers PERKO - Jamb Concealed Door Closer Fire tested Technical Data : Finish Article No. Brass Polished 931.90.418 • Concealed - enhance aesthetics - reduced opportunity Chrome Polished 931.90.412 for vandalism Chrome Matt 931.90.414 • Door Weight 50.8kg • Designed for light to medium duty installations • Tested to withstand 500,000 closing cycles • The precision engineered chain ensures smooth and lasting service 4 EN 1154 PERKOMATIC - Jamb Concealed Door Closer Fire tested Distance between centers of fixing 31 168 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). plates must not exceed 45 mm 123 55 31 168 44 6 4 26 60 60 123 26 Door thickness min. 38 mm (1 1/2”) Technical Data : Finish Article No. Brass Polished 931.90.408 • Concealed - enhance aesthetics - reduced opportunity for Chrome Polished 931.90.422 vandalism Chrome Matt 931.90.424 Special Order • Door Weight 75 kg • Designed for light to medium duty installations •Tested to withstand 500,000 closing cycles • The precision engineered chain ensures smooth and lasting service AH 4.18 New products and systems www.hafeleindia.com

Door Closers EN 1154 Concealed Door Closers POWERMATIC - Jamb concealed Door Closer Fire tested Technical Data : 4 • Fits in regular thickness 13/4” doors • CE Marked, controlled, concealed hydraulic door closer • Fire tested for 90 minuets fire doors • Door Weight 80 kg • Endurance tested to 500,000 closing cycles • 10 year guarantee • Adjustable closing speed and power latching action • Fits in regular thickness 13/4” doors We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Finish Article No. Brass Polished 931.90.438 Chrome Polished 931.90.432 Satin Chrome 931.90.434 Special Order New products and systems www.hafeleindia.com AH 4.19

Door Closers Clamping plate for all-glass doors for TS 4000 Overhead Position Door Closers Accessories Parallel arm bracket 4 Features or installation o the door closer to all glass doors or a . 10 glass thic ness 4 Version Finish Article No. Finish Article No. For DCL 11/DCL 15/DCL 51 Silver coloured 931.84.900 Silver coloured 931.16.311 Special Order Special Order Clamping plate for all-glass doors for TS 2000 Features We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). or installation o door closer to all glass doors or a . 10 glass thic ness Finish Article No. 931.16.379 Silver coloured Special Order AH 4A.2H64.20 NewNepwropdruocdtuscatsndansdystyesmtesmws:wwww.hwa.fhealefeinled.icao.cmom

Door Closers Overhead Position Door Closers Overhead sliding door closer for lightweight sliding doors 4 Features 4 ur ace ounted sliding door closer, for lightweight doors only with closing speed and closing power ad ust ent uita le or door si es 5 0 00 oor opens lightl and closes auto aticall huts out noise gases dust etc. saves energ or ti er or etal doors a . door weight per lea 0 g We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Version Article No. 1. 5.00 or e isting sliding door s ste s Special Request 4.36AH New products and systems www.hafeleindia.com 4.21New products and systems: www.hafele.com AH

Door Closers EN 1154 Floor Springs FS 2100 Floor Spring with 90 Hold open StarTec Double Action Top Centre 4 Double Action Bottom strap • Cover Plate in Satin Stainless Steel Door Width Size Article No. We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Tested for 500,000 cycles 750-850mm 2 932.79.020 850-1000mm 3 F 932.79.030 • Finish: St. Steel Cover 1000-1200mm 4 932.79.040 Technical Data : • Maximum Door Weight 120kg (for size 4) Wooden Door Accesories Article No. • Floor Spring Mechanism with Cover 932.79.090 Description AH 4.22 Double action accessories for Floor Spring suitable for timber doors New products and systems www.hafeleindia.com

Door Closers EN 1154 Floor Springs 300 kg Floor Spring with 90o Hold open StarTec 52-56 60 341 78 Double Action Top Centre 4 Double Action Bottom strap We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). • Cover Plate in Satin Stainless Steel Door Width Size Article No. Tested for 500,000 cycles 1400 mm 5-6 932.79.170 Special Order • Finish: St. Steel Cover Technical Data : Wooden Door Accesories Article No. • Maximum Door Weight 300kg (for size 5&6) 932.79.09004 • Floor Spring Mechanism with Cover Description Supplied with: • Double action accessories for wooden doors Double action accessories for Floor Spring (300 kg) suitable for timber doors New products and systems www.hafeleindia.com AH 4.23

Door Closers Floor Springs FS 6100 Heavy Duty Floor Spring (for 600 kg) 307 50 78 50 307 78 Door Closers Floor Springs Special Features : Intermediate pivot 307 • Cam & Roller Mechanism • Unique guidance system ensures doors always return to Finish Article No. Feat or centre position in double action St. Steel Cover without hold open 932.86.000 • High Efficiency St. Steel Cover with hold open 932.86.031 To • Easy operation and good holding forces Top hin • Suitable for doors upto 400kg (Single Action) and Supplied with Standard Double Action Accessories a 4 600kg (Double Action) Vers • Maximum Door Width - 1400mm from Pivot Point DIN DIN Construction Spec • Cast Iron Body for Heavy Duty Performance Feat a Door Closers• Stainless Steel & Steel Precision Manufactured Internal Components Floor Springs at tai Intermediate pivot Spec Door Closers Feature We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Floor Springs or using in co ination with loor spring Intermediate pivot 4To prevent ending o ver high doors Top pivot ar and loor spring ar need to e aligned with the hinge center an of set o 1 aterial Alu iniu Version Article No. FeatDurINe left hand 926.51.009 orDuINsinrgighint choand ination with loor spring 926.51.019 To prevent ending o ver high doors ToSppepciviaolt Oardear nd loor spring ar need to e aligned with the hinge center an of set o 1 aterial Alu iniu Pivot bearing Feature Version Article No. 4 or using in co ination with loor spring DIN left hand 926.51.009 To prevent ending o ver high doors DIN right hand 926.51.019 Top pivot ar and loor spring ar need to e aligned with the Special Order hinge center an of set o 1 aterial Alu iniu Version Article No. 4 4.24DIN left hand 926.51.009 New products and systems www.hafeleindia.com AH 926.51.019 DIN right hand Special Order

DoDooroCr lCosloesresrs Material/finish Article No. FlDoooroSr pCrlionsgesr Accessories tainless steel att 2. . 20 Pivot bearing Special Order Door selector EN 1158 Features od ad ust ent screw la p ar ad ust ent screw 4 ace i ing pattern not suita le or e ternal use na les a pair o re ated eeting stile doors to close in the 4 correct se uence auto aticall uita le or doors up to 1 200 wide and an standard door Selector striker thickness or re ated depth Active door Strike plate Tested and approved to N 115 1 Inactive door Including trip catch to prevent isaligned re ates in certain circu stances We reserve tWheerriesgehrtvteotahlteerrigshptetciofiacltateirosnspewciiftihcoatuitonnsoticwiteh(oSuEtAnoAtriccheit(eHcItNuraAlrcHhiatredctwuarrael 2H0a1r5d).ware 2015). Material/finish Article No. Centre line of door opening Alu iniu silver anodi ed 931.95.909 Special Order Selector striker Strike plate Inactive door Active door Door co-ordinator StarTec Features New pNreowdupcrtosdauncdtssaynsdtesmysstewmwsw: .whawfwel.ehianfdeilae..ccoomm In connection with door closer or dou le lea doors nsures the correct closing se uence o oth doors uita le or IN right hand and IN le t hand Installation on the door ra e inish Article No. Chro e plated 931.97.902 Special Order AHAH44..4295

65 Glass Door Fittings Glass Door Fittings

Glass Door Fittings Patch Fittings Patch fittings tubular type StarTec A Bottom and Top patch fitting StarTec Features Z
$JM
BG<NN
OCD>FI@NN
Y
HH 6 Z
1PDO<=G@
AJM
\"',
G@AO
C<I?
<I?
\"', MDBCO
C<I? Z
$JM
?JP=G@
<I?
NDIBG@
<>ODJI
?JJMN Technical data ifications without notice (SEA Architectural Hardware 2015). Z
+<S
?JJM
R@DBCO

FB Z
+<S
?JJM
G@<A
RD?OC

HH Installation Z
!G<HK
ADSDIB
RDOC
NK@>D<G
ADSDIB
RM@I>C
JM?@M
N@K<M<O@GT Z
$JM
HJPIODIB
OC@
BG<NN
?JJM
<
AGJJM
NKMDIB
JM
KDQJO
=@<MDIB
HPNO
=@
JM?@M@?
N@K<M<O@GT
1@@
1@>ODJI
 Supplied with 1 Top patch fitting 
JOOJH
K<O>C
ADOODIB +<O@MD<G$DIDNC Version !<O
,J 1O<DIG@NN
NO@@G
H<OO
 Top patch fitting    JOOJH
K<O>C
ADOODIB

Glass Door Fittings Glass Door Fittings Contents Patch Fittings Patch & Point Fittings Fanlight pivot point fitting StarTec Fanlight/side panel pivot point fitting StarTec Patch fitting.................................................................................5.4 Point fitting ...............................................................................5.27 Glass Door Fittings Glass Door Accessories Glass Door Fittings Features Features 6 Glass Door Fittings or glass thic ness 10 12 or glass thic ness 10 12 Glass Door Fittings Patch Fittings uita le or IN le t hand and IN right hand uita le or IN le t hand and IN right hand Patch Fittings Glass Door GHP 200 StarTec We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Technical data Technical data ivot ad usta le 2 ide ar ad usta le 2 Installation Installation la p i ing with special i ing wrench order separately la p i ing with special i ing wrench order separately Supplied with Supplied with 1 Fanlight pivot point fitting 1 Fanlight/side panel point fitting Glass Door Strike patch GHP 200 StarTec Material/Finish Article No. Material/Finish Article No. att ( 0 ) 981.20.020 att ( 0 ) 1.20.0 0 PC Lock Special OFredaetrures LockingSpecial Order Patch Startec................................................................5.35 Area of application: For double doors made of tempered safety glass or glass thic ness Version: 2-piece, with stop, protrudes the glass edge ounting or IN le t and IN right hande use Material/Finish Article No. aterial inish IN le t IN right HSaS nmadtt les for locking patch St9a02r.t3e0.3c70...............................................5.48 SS matt (304) 1. . 0 1. . 0 Special Order Features Area of application: For door made of tempered safety glass or glass thic ness Version ontinuous visi le glass edge within the loc area, 2-piece, in compliance with DIN 18251, grade 3, Prepared for profile cylinder (PC) and lever handles without handles roses. lever follower: Clamping follower, optional for lever handles with or without handle roses or prepared for lever handles with handle roses New products and systems: www.hafele.com AH 6.27 ever ollower Material/Finish Article No. SS polished/matt 902.30.372 ac set 5 .5 Self-Lock Glazing System™ounting or IN le t and IN right hand use 6 6 5 Prepared for profile cylinder (PC) and lever handles with handles roses. 6 SinglePro..................................................................................5.51 2-Piece hinge (wing part) We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Features We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).DIN leftDIN rightFeatures Material/FinishWe reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). Article No. Version: With key action Area of application: For wooden or steel frames SS matt 902.30.660 ead olt 2 turn or glass thic ness istance 2 oor weight a . 5 g nuc le 1 . Material/Finish For lever handles without handle roses aterial inish Article No. SS matt (304) 981.49.100 981.49.110 Stainless steel matt (304) 1.01.5 0 For lever handles with handle roses SS matt (304) 981.49.120 981.49.130 Special Order New products and systems: www.hafele.com We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Shower Cubicle Fittings & Glass Door AccessoriesAH 6.44 Article No. Material/Finish 902.30.671 AH 6.46 New products and systems: www.hafele.com SS polished/matt New products and systems: www.hafele.com Shower Hinges.........................................................................5.53 Glass Connectors.....................................................................5.62 Glass Door Seals................A..H...6....5..5............................................5.67 Glass Door Handles & Knobs...................................................5.69 Shower Header Bars & Accessories.........................................5.73 Glass Door Locks Glass Door Fittings Glass Door Accessories Flush pull handle Forma Knob set for glass doors................................................5.75 Features Sliding glass door lock..............................................................5.77 Area of application: For glass thickness 8–10mm rill whole Flushor cla p i ing pull handles.....................................................................5.78 Installation WC Indicator lock.....................................................................5.82 Material/Finish Article No. ( 0 ) att 981.52.521 Special Order AH 5.2 New products and systems www.hafeleindia.com 6 Features Area of application: For glass thickness 8–10mm rill whole Installation or cla p i ing dware 2015).

Glass Door Fittings Patch Fittings Patch Fittings H ele s range o atch ittings consisting o a wide arra o asic t pes and variants ena les conception o glass asse lies that suit our ideas o unctionalit . H ele s ange o atch ittings not onl a es the glass asse lies loo visuall stri ing ut also technicall sound. H ele ngineering that powers this range guarantees i pecca le racas ree per or ance relia ilit . he elegant stainless steel finish ( att and olished) o the patch fittings aug ents the aesthetics thus enhancing their inherent versatilit . hese patch fittings are suita le or a glass door thic ness o 15 and provide or widel di ering arrange ents with corner fittings at di erent angles with top or otto loc fittings and with dou le or single action door fittings in single lea or dou le lea designs. Poo6iinntt Fittings e patch fittings can e easil ittings li individualised their distinctive designs. H ele s We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). range o point fittings with its ini ita le and state We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). o the art designs allows or co plete artistic e i ilit . he surpass the unctional ele ent o hanging the glass asse l and ove on to eco ing a true design highlight. H ele s range o oint ittings is ade o tainless teel 0 grade thus ensuring outstanding ualit and superior 5 unctionalit . he oint ittings are suita le or a glass door thic ness o 10 12 and provide or a variet o diverse applications or single and dou le lea doors. New productsGalansdssyDsoteomr sL:owcwkws .hafele.com AH 6.3 H ele s collection o glass door loc s o ers eticulousness and dependa ilit together with visual elegance. Its conte porar designs together with e ceptional unctionalit ensure the ulfill ent o all practical and aesthetic re uire ents. H ele s range o glass door loc s includes loc s designed or single and dou le doors as well as sliding glass doors. epending on our sensi ilities pre erences and ease o installation ou can choose loc s that re uire a glass cutout or the ones that don t (the can e si pl cla ped). hese loc s are ade up o either tainless teel rade 0 or rass there ensuring high securit standards. Shower Fittings & Accessories Apart ro its co prehensive range o lass ittings Ha ele also e tends its core co petence in hardware through its e ficient and pro essional range o shower cu icle fittings and accessories. hrough this co plete solution ased range ou are li el to find ever possi le fitting that is re uired to provide actuation to our ideal shower cu icle. e it a host o shower cu icle hinges availa le in di erent opening angles or cla ps and over head ars connectors ou can choose the est pac age to create ra eless glass shower enclosures. o co plete this range o shower cu icle fittings we o er to ou accessories li e seals towel ars with handles and door no s that are availa le in uni or finishes and atch up to the sa e ualit standards o ered the rest o our range. New products and systems www.hafeleindia.com AH 5.3

Glass Door Fittings Ha ele top patch fitting or dou le action doors Patch Fittings StarTec Ha ele otto patch fitting or dou le action doors StarTec 5 Features Features We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). or glass thic ness 10 12 or glass thic ness 10 12 uita le or IN le t hand and IN right hand uita le or IN le t hand and IN right hand or dou le action doors or dou le action doors Technical data a . door weight 0 g Technical data a . door lea width 1 100 a . door weight 0 g Installation a . door lea width 1 100 la p fi ing concealed with he agon soc et screws or ounting the glass door a door spring ust e ordered Installation separatel la p fi ing concealed with he agon soc et screws Supplied with 1 otto patch fitting or dou le action doors Supplied with 2 Allen e s W 2 and 5 1 op patch fitting or dou le action doors 1 Additional gas et or glass thic ness 10 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 Finish Article No. Finish Article No. Aluminium 981.50.010 Aluminium 981.50.020 AH 5.4 New products and systems www.hafeleindia.com

Glass Door Fittings Ha ele anlight slide panel patch fitting StarTec Patch Fittings Ha ele anlight pivot patch fitting or wall fi ing StarTec Features Features 5 ounter earing or top patch fitting ounter earing or top patch fitting We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). or glass thic ness 10 12 or glass thic ness 10 12 uita le or IN le t hand and IN right hand uita le or IN le t hand and IN right hand Technical data Technical data ivot laterall ad usta le ivot laterall ad usta le Installation Installation la p fi ing concealed with he agon soc et screws la p fi ing concealed with he agon soc et screws Supplied with Supplied with 1 anlight pivot patch fitting with wall fi ing plate 1 anlight side panel pivot patch fitting 2 Allen e s W 2 and 5 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 1 Additional gas et or glass thic ness 10 i ing aterial Finish Article No. Finish Article No. Aluminium 981.50.050 Aluminium 981.50.040 New products and systems www.hafeleindia.com AH 5.5

Glass Door Fittings Ha ele top patch fitting or dou le action doors Patch Fittings StarTec Ha ele otto patch fitting or dou le action doors StarTec Features Features We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). or glass thic ness 10 12 5 or glass thic ness 10 12 uita le or IN le t hand and IN right hand uita le or IN le t hand and IN right hand or dou le action doors or dou le action doors Technical data Technical data a . door weight 0 g a . door weight 0 g a . door lea width 1 100 a . door lea width 1 100 Installation la p fi ing concealed with he agon soc et screws Installation or ounting the glass door a door spring ust e ordered la p fi ing concealed with he agon soc et screws separatel Supplied with Supplied with 1 otto patch fitting or dou le action doors 1 op patch fitting or dou le action doors 2 Allen e s W 2 and 5 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 1 Additional gas et or glass thic ness 10 Finish Article No. Finish Article No. SS Matt 981.00.000 SS Matt 981.00.010 SS Polished 981.00.001 SS Polished 981.00.011 AH 5.6 New products and systems www.hafeleindia.com

Glass Door Fittings Ha ele corner patch loc with aperture with c linder Patch Fittings StarTec Ha ele anlight pivot patch fitting or wall fi ing StarTec Features Features 5 ounter earing or top patch fitting or glass thic ness 10 12 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). or glass thic ness 10 12 uita le or IN le t hand and IN right hand uita le or IN le t hand and IN right hand or profile c linders olt 1 turn Technical data ivot laterall ad usta le Installation la p fi ing concealed with he agon soc et screws Installation la p fi ing concealed with he agon soc et screws Supplied with 1 orner patch loc with aperture Supplied with 2 Allen e s W 2 and 5 1 anlight pivot patch fitting with wall fi ing plate 1 tri ing plate with fi ing aterial 2 Allen e s W 2 and 5 1 i ing screw or profile c linder 1 Additional gas et or glass thic ness 10 1 Additional gas et or glass thic ness 10 i ing aterial Finish Article No. Finish Article No. SS Matt 981.00.110 SS Matt 981.00.480 SS Polished 981.00.111 SS Polished 981.00.401 New products and systems www.hafeleindia.com AH 5.7

Glass Door Fittings Patch Fittings op ivot or doors with fi ed glass panel on top side or 10 12 glass StarTec Glass Door Fittings Patch Fittings Fanlight double strike patch for corner Fanlight/fin panel double pivot patch lock StarTec fitting StarTec orner Fanlight/fin panel double pivot patch 6 crews GFelaatfuistrtesisnDg SotoarrTFecittings Fanlight/fin panel double pivot patch Patch Fittingsounter earing or top patch itting Article No. fitting StarTec 981.00.160 or glass thic ness 10 12 981.00.161 Technical data Finish Article No. orner iFvoatnlaltiegrahllt dadouusbtalelestrike patch for corner SS Matt 981.07.100 InstlaollcaktioSntarTec 5 SS Polished 981.07.101 la p i ing concealed with he agon soc et screws pecial e uest Supplied with 1 anlight in panel dou le pivot patch itting 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 Material/finish Article No. att ( 0 ) 981.00.150 Fanlight/fin panel double pivot patch fiptotliinshgedS(ta0rT) ec 981.00.151 Special Offer We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).Features ns without notice (SEA Architectural Hardware 2015). or glass thic ness 10 12 Features 6 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015).Installationounter earing or top patch itting or glass thic ness 10 12 la p i ing concealed with he agon soc et screws Supplied with Technical data 1 anlight dou le stri e patch or corner loc ivot laterall ad usta le afele.com 2 AllenFeaetusreWs 2 and 5 6.15 6Installation 1 Additionoaulngtears eetaroinrgglaosrstothpicpantcehssi1tt0ing crews or glass thic ness 10 12 AH la p i ing concealed with he agon soc et screws Article No. MateTrieacl/hfinniischal data Article No. Supplied with 981.00.160 981.00.161 1 anlight in panel dou le pivot patch itting rews FIneatsaotittvr(auoglr0ltleaalasts)itsoenrthalilc ad usta le 981.00.160 2 Allen e s W 2 and 5 ness 10 12 1 AddFiteioantualregsas et or glass thic ness 10 6 pInoslistlhaaelldapt(ioi0nin)g concealed with he agon soc et s9c8r1e.w0s0.161 Materiaolo/rfuingnilstaehsrs earing or top patch itting Article No. Sulpaplipedi winigthconcealed with he agon soc et screws thic ness 10 12 981.00.150 SpecS1iaulpOapnfflleiiegrdhtwinithpanel dou le pivot patch itting 12 Aalnlelnightedsou Wle2starinde 5patch or corner loc Teactth(n0ica) l data ivot laterall ad usta le 21AAlldednitioenasl gWas2eat nodr5glass thic ness 10 pInoslisthaelldat(io0n ) 981.00.151 1 MAdadteitriioanl/afinl gisahs et or glass thic ness 10 Article No. SpeciSaul Oplapffelirepdi ing concealed with he agon soc et screws Materiaatl/tfi(ni0sh) A9r8ti1c.le00N.1o5. 0 with 1 anlight in panel dou le pivot patch itting Featuproaetlsits(he0d )( 0 ) 998811..0000..116501 2 Allen e s W 2 and 5 Article No. SpoecupinoatleisOrhfefeedra(rin0g ) or top patch itting 981.00.161 1 Additional gas et or glass thic ness 10 Spoercgialal sOsfftehric ness 10 12 6Material/finish 5.8Technical data New patrt o( d0u)cts and systems www.hafele9i8n1d.0i0a.1.c50om AH ivot laterall ad usta le polished ( 0 ) 981.00.151 Installation la p i ing concealed with he agon soc et screws Special Offer Supplied with

GGlalsassDDooor rFiFttitintigngss FaFnalniglihgth/ts/isdied/ef/infinpapnaenlepl ipviovtopt aptacthch PPaatctchhFFitittitninggss fitftitintigngStSatraTreTcec FaFnalniglihgth/ts/isdied/ef/infinpapnaenlepl ipviovtopt aptacthch fitftitintigngStSatraTreTcec 66 FeFaetautruerses FeFaetautruerses 5 ouonutenrtereaerianrgingorotroptopaptcahtchittinttging ouonutenrtereaerianrgingorotroptopaptcahtchittinttging orogrlagslasstshitchicnensess1s0101212 orogrlagslasstshitchicnensess1s0101212 TeTcehcnhicnaicladladtata TeTcehcnhicnaicladladtata ivoivtolat tleartaelrlalladaudsutastale le ivoivtolat tleartaelrlalladaudsutastale le InIsntsatllaaltlaiotnion InIsntsatllaaltlaiotnion la lap pi ini gingcocnocnecaeleadledwiwthitheheagaognosnoscocetestcsrecwresws la lap pi ini gingcocnocnecaeleadledwiwthitheheagaognosnoscocetestcsrecwresws SuSpupplipeldiedwiwthith SuSpupplipeldiedwiwthith 1 F1aFnalinglhigt/hsti/dseid/fein/fipnapnaenl eplivpoivtoptaptcahtcfhittfinttging 1 F1aFnalinglhigt/hsti/dseid/fein/fipnapnaenl eplivpoivtoptaptcahtcfhittfinttging 2 A2llAelnlene es sWW2 a2nadn5d 5 2 A2llAelnlene es sWW2 a2nadn5d 5 1 A1dAdditdioitnioanl aglagsaseteot rogrlagslasstshitchicnensess1s010 1 A1dAdditdioitnioanl aglagsaseteot rogrlagslasstshitchicnensess1s010 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).MaMteartiearli/afiln/fiisnhishArAticrtlieclNe oN.o.MaMteartiearli/afiln/fiisnhishArAticrtlieclNe oN.o. We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). LeLftehftahnadnd 98918.010.0.05.0050 RigRhigthhtahnadnd 1.010.0.0.00 0 atta(tt 0( 0) ) atta(tt 0( 0) ) poplioshlisehde(d 0( 0) ) 98918.010.0.05.0151 poplioshlisehde(d 0( 0) ) 1.010.0.0.01 1 SpSepceiacliaOl rOdredrer SpSepceiacliaOl rOdredrer AHAH 66.N1.e16w6products and systems www.hafeleindia.com 5.9NNewewprpordoudcutcstsanadndsyssytsetmems:sw: wwwww.h.ahfaefleeAl.ecH.ocmom

Glass Door Fittings Ha ele corner patch loc with aperture with c linder Patch Fittings StarTec op ivot with tainless teel late or lass oors with Wooden i ed anel on op StarTec Finish Article No. Features SS matt 981.07.280 or glass thic ness 10 12 uita le or IN le t hand and IN right hand 5 loor ivot with earing or profile c linders olt 1 turn We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Installation la p fi ing concealed with he agon soc et screws Supplied with 1 orner patch loc with aperture 2 Allen e s W 2 and 5 1 tri ing plate with fi ing aterial 1 i ing screw or profile c linder 1 Additional gas et or glass thic ness 10 Finish Article No. Finish Article No. SS matt 981.07.290 Aluminium 981.50.030 AH 5.10 New products and systems www.hafeleindia.com

GGlalasssssDDDoooooorrrFFFiittittitinningggsss CCoornrneer rppaatctchhlolocckkwwitihthPPCCaappeertruturereSStatarTrTeecc PPaattcchhhFFFiitittttiininngggsss CCeenntrtereppaatctchhlolocckkwwitihthPPCCaappeertruturereSStatarTrTeecc FFeaetauturerses ororglgalsasssthtihcicnensesss10101212 uiutaitaleleoror ININlelet ht ahnadndanadnd ININrigrihgthht ahnadnd FFeaetauturerses ororprporfoilfeilecyclyinlidnedresrs(p(lpelaesaeseorodredrersespeapraartaetleyl)y) ororglgalsasssthtihcicnensesss10101212 olot l1t 1tutrunrn uiutaitaleleoror ININlelet ht ahnadndanadnd ININrigrihgthht ahnadnd ororprporfoilfeilecyclyinlidnedresrs(p(lpelaesaeseorodredrersespeapraartaetleyl)y) InInstsatlalalltaitoionn lala ppi inigngcocnocnecaelaeldedwwithithheheagaognonsoscocetest csrcerwews s 66 olotl1t 1tutrunrn InInstsatlalalltaitoionn SSuuppplielidedwwitihth 5 lala ppi inigngcocnocnecaelaeldedwwithithheheagaognonsoscocetest csrcerwews s 11 oronrenrerpaptacthchlolcoc wwithith apaepretrutruere SSuuppplielidedwwitihth 11 enetnrterepaptacthchlolcoc wwithith apaepretrutruere 22AAllellnen ees s WW22anadnd55 22AAllellnen ees s WW22anadnd55 11 trtiriinigngplpaltaetewwithithi inigng ataetreiarilal 11 i inigngscsrcerwewfofrorprporfoilfeilecyclyinlidnedrer 11AAddidtiiotinoanlagl agsasetetororglgalsasssthtihcicnensesss1010 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). 11 i inigngscsrcerwewfofrorprporfoilfeilecyclyinlidnedrer WWee rreesseerrvvee tthhee rriigghhtt ttoo aalltteerr ssppeecciiffiiccaattiioonnss wwiitthhoouutt nnoottiiccee ((SSEEAA AArrcchhiitteeccttuurraall HHaarrddwwaarree 22001155))..11AAddidtiiotinoanlagl agsasetetororglgalsasssthtihcicnensesss1010 MMataetreiarila/fl/infiinsihsh ata.tN. No.o. MMataetreiarila/fl/infiinsihsh ata.tN. No.o. tatianilnelsesssstsetelel atatt(t (00) ) 1.10.0.0.000 Finish Article No. Finish Article No. tSatSianilmnelseassttss(t3set0e4le)l atatt(t (00) ) 981.010.10..401.00.1010 StaStianmilnelaseststss(3tse0te4le)pl oploislihsehded( (00) ) 981.010.1.04.00.00.0101 981.00.401 tSatSianilpneloselssissshtseetdele(3pl 0op4lois)lihsehded( (00) ) 981.010.10..401.01.111 SS polished (304) pecial e uest pecial e uest AAHH 66.N8.8ew products and systems www.hafeleindia.com 5.11NNeewwpprorodduucctstsaannddssyysstetemmss: :wwwwww.h.haafefeleleA.c.Hcoomm

GGlGalaslasssDsDoDooororFrFitFtitintitngingsgss OOvveerrppaanneel lsstrtirkikeeppaatctchhfoforrccoornrneerrlolocckkSStatarTrTeecc PPaPatacttchchhFFiFtittiitntinigngsgss CCeenntrteresstrtirkikeeppaatctchhfoforrcceenntrterelolocckkSStatarTrTeecc FFeeaatutureress FFeeaatutureress 5 oor rgglalsassththicicnnesess11001122 oor rgglalsassththicicnnesess11001122 66 uuitaitaleleoor r ININlelet thhananddanandd ININrigrighht thhanandd uuitaitaleleoor r ININlelet thhananddanandd ININrigrighht thhanandd InInsstatallallatitoionn InInsstatallallatitoionn WWee rreesseerrvvee tthhee rriigghhtt ttoo aalltteerr ssppeecciiffiiccaattiioonnss wwiitthhoouutt nnoottiiccee ((SSEEAA AArrcchhiitteeccttuurraall HHaarrddwwaarree 22001155)).. We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015).lala ppi iininggcoconncecaelaeldedwwithithhheeagagoonnsosoccetetscsrcerwewsslala ppi iininggcoconncecaelaeldedwwithithhheeagagoonnsosoccetetscsrcerwewss SSuuppplielieddwwitihth SSuuppplielieddwwitihth 11 enentrterestsrtirieeppatacthchoor rcecnentrterelolocc 11 vevrerppananelesl tsrtirieeppatacthchoor rcecnentrterelolocc 22AAllellnen eess WW22anandd55 22AAllellnen eess WW22anandd55 11AAddditiotionnalagl gasasetetoor rgglalsassththicicnnesess1100 11AAddditiotionnalagl gasasetetoor rgglalsassththicicnnesess1100 MMataetreiarila/fl/infinisihsh ata.t.NNoo. . MMataetreiarila/fl/infinisihsh ata.t.NNoo. . tatianinlelsessstsetelel atattt( (00) ) 11.0.00. .2200 tatianinlelsessstsetelel atattt( (00) ) 11.0.00. . 00 tatianinlelsessstsetelepl poolislihsheded( (00) ) 11.0.00. .2211 tatianinlelsessstsetelepl poolislihsheded( (00) ) 11.0.00. . 11 Finish Article No. Finish Article No. 981.00.420 981.00.470 SS matt (304) 981.00.421 SS matt (304) 981.00.471 SS polished (304) SS polished (304) pecial e uest pecial e uest 5.12AH NNeewwpprorodduucctstsaannddssyysstetemmss: :wwwwww.h.haafefelele.c.coomm New products and systems www.hafelAeAHinHdi6a6..c.9o9m

GGlalasssDDooor rFFitittitninggss Fanlight/fin panel double pivot patch PPaatctchhFFitittitninggss fitting StarTec Fanlight double strike patch for corner lock StarTec Features Features 56 or glass thic ness 10 12 ounter earing or top patch itting We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015). or glass thic ness 10 12 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Installation la p i ing concealed with he agon soc et screws Technical data ivot laterall ad usta le Supplied with 1 anlight dou le stri e patch or corner loc Installation 2 Allen e s W 2 and 5 la p i ing concealed with he agon soc et screws 1 Additional gas et or glass thic ness 10 Supplied with Material/finish Article No. 1 anlight in panel dou le pivot patch itting 2 Allen e s W 2 and 5 att ( 0 ) 981.00.160 1 Additional gas et or glass thic ness 10 polished ( 0 ) 981.00.161 Material/finish Article No. Special Offer att ( 0 ) 981.00.150 polished ( 0 ) 981.00.151 Special Offer NewNepwropdruocdtuscatsndansdysstyesmtesmwsw: www.hwa.fhealefeinled.icao.cmom AH A6H.51.513

Glass Door Fittings lass la p or oining ver anels ide anels to reduce Patch Fittings le ing or 10 or 12 lass op atch or onnecting 2 or lass anels or 10 or 12 lass Finish Article No. Finish Article No. SS matt 981.00.120 SS matt 981.07.170 SS Polished 981.00.121 SS polished 981.07.171 pecial e uest ide onnector or Holding i ed anels or upport in ide onnector or holding i ed anels or upport in rac et or 10 or 12 lass rac et or 10 or 12 lass 5 Finish Article No. Finish Article No. We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). SS matt 981.07.160 SS matt 981.07.180 SS polished 981.07.161 SS polished 981.07.181 AH 5.14 New products and systems www.hafeleindia.com

Glass Door Fittings Side/fin panel patch fitting StarTec Patch Fittings Side/fin panel patch fitting StarTec 6 Features 5 or glass thic ness 10 12 Installation la p i ing concealed with he agon soc et screws Supplied with 1 Side/fin panel patch fitting 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015).Features Material/finish We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).Article No.or glass thic ness 10 12 att ( 0 ) 981.00.070 Installation la p i ing concealed with he agon soc et screws Supplied with 1 Side/fin panel patch fitting 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 polished ( 0 ) 981.00.071 Special Order Material/finish Article No. att ( 0 ) 981.00.190 polished ( 0 ) 981.00.191 Special Order 6.14New products and systems www.hafeleindia.com 5.15New products and systems: www.hafeleA.cHom AH

GGllaassss DDoooorr FFiittttiinnggss Fanlight/side panel connection patch fitting PPaattcchh FFiittttiinnggss with stop StarTec Fanlight/side panel connection patch fitting StarTec Features Features IN right hand 6 or glass thic ness 10 12 or glass thic ness 10 12 ptional with door uffer uita le or IN le t hand and 5 uita le or IN le t hand and IN right hand Installation Installation la p i ing concealed with he agon soc et screws la p i ing concealed with he agon soc et screws Supplied with Supplied with 1 Fanlight/side panel connection patch fitting 1 Fanlight/side panel patch fitting with stop 2 Allen e s W 2 and 5 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 1 Additional gas et or glass thic ness 10 1 Insert door uffer 2 Blind insert profiles We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).Material/finish Article No. We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). Material/finish Article No. att ( 0 ) 981.00.100 polished ( 0 ) 981.00.101 att ( 0 ) 981.00.060 Special Request polished ( 0 ) 981.00.061 Special Request 5.16AHNew products and systems: www.hafele.com 6.17New products and systems www.hafeAleHindia.com

GGlalassssDDoooorrFFitittininggss CCoorrnneerrssttrrikikeeppaattcchhssqquuaarreeffoorr PPaattcchhFFiittttiinnggss ccoorrnneerrlolocckkSSttaarrTTeecc CCoorrnneerrppaattcchhlolocckkssqquuaarreewwitithh PPCCaappeerrttuurreeSSttaarrTTeecc FFeeaatuturreess FFeeaatuturreess oorrgglalassssththicic nneessss1100 1122 uuitiata lele oorr ININleletthhaannddaanndd ININrirgighhtthhaanndd oorrgglalassssththicic nneessss1100 1122 oorrpprorofiflieleccyylilninddeerr(p(pleleaasseeoordrdeerrsseeppaararatetelyly) ) ooltlt11tuturnrn uuitiata lele oorr ININleletthhaannddaanndd ININrirgighhtthhaanndd 66 InInsstatallalatitoionn oorrpprorofiflieleccyylilninddeerr lala pp i i iningg ccoonncceeaaleledd wwitihthhhee aaggoonnssoocc eettssccrerewwss SSuupppplileieddwwitihth InInsstatallalatitoionn 11 oornrneerrppaatctchhlolocc ss uuaarerewwitihthPP aappeertruturere 22AAlllelenn ee ss WW22aanndd55 lala pp i i iningg ccoonncceeaaleledd wwitihthhhee aaggoonnssoocc eettssccrerewwss 5 11AAdddditiitoionnaal lggaass eett oorrgglalassssththicic nneessss1100 SSuupppplileieddwwitihth 11 oornrneerrsstrtiri eeppaatctchhss uuaarerefoforrccoornrneerrlolocc We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). WWee rreesseerrvvee tthhee rriigghhtt ttoo aalltteerr ssppeecciiffiiccaattiioonnss wwiitthhoouutt nnoottiiccee ((SSEEAA AArrcchhiitteeccttuurraall HHaarrddwwaarree 22001155))..22AAlllelenn ee ss WW22aanndd55 11AAdddditiitoionnaal lggaass eett oorrgglalassssththicic nneessss1100 MMaateteriraial/lf/ifninisishh aat.t.NNoo. . MMaateteriraial/lf/ifninisishh aat.t.NNoo. . Fitnatiaisnihnlelessssssteteeel l aattt( ( 00 ) ) Article1N1.0.o00.0.. 5500 tatFainiinnleilseshsssssteteeel l aattt( ( 00 ) ) Artic11l.e0.00N0.o. . 00 SS matt (304) 981.00.450 tatSainiSnlelemsssassttstet(e3ee0l l4pp)oolilsishheedd( ( 00 ) ) 9811.10.0.000.04. .6011 StSataipninolelleisssshsessdtetee(3el 0lpp4oo)lilsishheedd( ( 00 ) ) 981.0011..40.05001.. 5511 SS polished (304) 981.00.461 pecial e uest pecial e uest AAHH 66.N.11e8w8 products and systems www.hafeleindia.com 5.17NNeewwpprroodduuccttssaannddssyysstteemmss::wwwwww.h.haaffeeleleA.c.Hcoomm

PGGPalaaltastcscshshDDFFoiotoitotrtirniFnFgigtistsitninggss Centre strike patch for thumbturn lock StarTec Centre patch lock with thumbturn StarTec Features Features 6 or glass thic ness 10 12 or glass thic ness 10 12 uita le or IN le t hand and IN right hand uita le or IN le t hand and IN right hand Installation Installation la p i ing concealed with he agon soc et screws la p i ing concealed with he agon soc et screws Supplied with Supplied with 1 entre patch loc with thu turn 1 entre stri e patch or thu turn loc 2 Allen e s W 2 and 5 2 Allen e s W 2 and 5 1 Additional gas et or glass thic ness 10 5 1 Additional gas et or glass thic ness 10 We reserve the right to alter specifications without notice (SEA Architectural Hardware 2015).Material/finishArticle No.Material/finishArticle No. We reserve the right to alter specifications without notice (HIN Architectural Hardware 2015). att ( 0 ) 1.00. 0 att ( 0 ) 1.00. 0 polished ( 0 ) 1.00. 1 polished ( 0 ) 1.00. 1 Special Request Special Request 5.18AH New products and systems: www.hafele.com 6.19New products and systems www.hafeleindia.com AH