2022 Mighty Catalog Book_WEB_nospine

Vehicle Protection Vehicle Protection Vehicle protection products provide an extra layer of protection while servicing your customer’s vehicle. Investing in these products is an inexpensive way to show your customers that health and cleanliness is a priority. See Shop Supplies section for more information on Vehicle Protection products Seat Covers Steering Wheel Covers (See page 103) (See page 103) Floor Mats (See page 114) Parts Bags Gear Shift Covers (See page 124) (See page 103) Tire Bags (See page 124) Fender Covers Battery Bags (See page 124) (See page 103) (MSL-30) Personal Protective Equipment 99

Wipes Wipes Wiping down surfaces in between visitors, patients or customers is a safe precaution. We offer a variety of wipes that provide a quick yet effective cleaning option in between deep-cleaning practices. Pure Hand & Surface Sanitizing Wipes • Convenient single-use wipe • Antibacterial sanitizer - kills 99.99% of germs • Multi-purpose formula for use on hands and surfaces • Great for home, office and auto Part No. Quantity PHSW24 24/cs PHSW100 100/cs WW10800 Surface Disinfecting Wipes • Pre-saturated for one step cleaning • Bleach-free, alcohol-free and phenol-free • Contains a hospital grade quaternary formula • Wipes pull out one at a time reducing waste and saving you money • Safe on most surfaces • Wipe size: 8.4” x 6” • 800 wipes per roll • Made in the USA • Compatible with the 59125 and EWDISPFLOORD dispensers WWSD800 Surface Disinfecting Wipes WetWorks® +Plus pre-saturated surface cleaning and disinfecting wipes have demonstrated effectiveness against viruses similar to SARS-CoV-2 on hard, non-porous surfaces. Therefore, this product can be used against SARS-CoV-2 when used in accordance with the directions for use against Human Coronavirus on hard, non-porous surfaces. Please refer to the EPA website for additional information. • EPA registered • Cleans & disinfects • Kills cold & flu virus (on hard non-porous surfaces) • Kills 99.9% of germs and bacteria in 15 seconds • Bleach-free and alcohol-free • Contains a hospital grade, all-purpose dual-chain quaternary disinfectant • Safe on most surfaces • Made in USA • Wipe 8” x 6” • 800 wipes per roll - 4 rolls/case • Compatible with the 59125 and EWDISPFLOORD dispensers 100 Personal Protective Equipment

Shop Supplies Conditioning & Surfacing Discs ............................................. 102 Covers.................................................................................. 103 Dispenser Racks..................................................................... 104 Facility Supplies.............................................................105-111 Fillers & Funnels............................................................112-113 Floor Mats............................................................................ 114 Gloves & Sleeves.................................................................... 115 Hand Cleaners & Dispensers............................................. 116-118 Lighting & Electrical............................................................. 119 Safety Products..............................................................120-123 Service Items......................................................................... 124 Shop Supplies..................................................................125-127 Static Cling Label Printer...................................................... 128 Tool Storage......................................................................... 129 Shop Supplies 101

Conditioning & Surfacing Discs Abrasive Conditioning Discs Disco Shark Ind. Size Grit Color Box Qty Automotive Part No. 2” Coarse Brown 50 (MSL-12) Part No. SK-13003 2” Medium Maroon 50 15094PK SK-13004 2” 50 Box Qty 15095PK SK-13005 3” Fine Blue 25 15096PK SK-13019 3” Coarse Brown 25 25 15097PK SK-13020 3” Medium Maroon 25 25 15098PK SK-634TB Blue 25 15099PK Fine 25 25 Green Zirconia Grinding Discs 25 25 Disco Shark Ind. Size Grit 25 Automotive Part No. 2” 24 Part No. SK-12612 2” 36 15100PK SK-12613 2” 50 15101PK SK-12614 2” 80 15102PK SK-12615 3” 24 15103PK SK-12616 3” 36 15104PK SK-12617 3” 50 15105PK SK-12618 3” 80 15106PK SK-12619 15107PK Surface Disc Holders Part No. Size Box Qty 15108 2” Sold Each 15109 3” Sold Each Disc Assortment Kits 37330 Hub Buddy Cleaner • 8699RCP - Abrasive Conditioning Disc Assortment Includes: • Impact rated • 30 Different Sizes • Heavy-duty steel construction • 114 Total Pieces • Complies with RIST procedure • 2” and 3” Diameter Discs • Replaceable cleaning discs - • 8800RCP - Green Zirconia Grinding Disc 37335 Assortment Includes: • 8 Different Sizes (MTE-42) • 147 Total Pieces • 2” and 3” Diameter Discs (MTE-38) 102 Shop Supplies

Covers Seat Covers Part No. Description Thickness Quantity P9943-15 Value Seat Cover .5 mil. 500 per roll P9943-19 Premium Seat Cover .7 mil. 200 per roll P9943-10 Premium Seat Cover .7 mil. 250 per box P9943-14 Premium Seat Cover .7 mil. 250 per roll P9943-20 Heavy Duty Seat Cover 1.0 mil. 200 per roll P9943-16 Seat-Jacket 2 Pocket Heavy Duty 2.0 mil. 50 per roll Gear Shifter Covers Part No. Description Quantity GSC-1 Gear Shift Cover 100 per box GSC-5 Gear Shift Cover 500 per box Gear Shift Cover 1000 per box P9943-80 Steering Wheel Covers Part No. Description Quantity P9943-33 Steering Wheel Cover - 500 per P9943-35 Double Band Style box Steering Wheel Cover - 250 per Truck - Double Band Style box P9943-22 Car Cover H1142-35 Battery Bags • Size: 22” x 30” • Thickness: 5 mil. • Quantity: 10 per roll • Size: 82” x 300” • Thickness: .7 mil. • Quantity: 30 per roll • Car Covers are designed to provide dust or over-spray protection (MSL-30) Shop Supplies 103

Dispenser Racks M7505-04 Paper Floor Mat Dispenser Kit • Rolls for easy movement in shop • Tray holds paper floor mats • Has 3 racks to hold rolls • Built of heavy gauge steel • Easy to manage products and easy to refill • For rack only, order part number P9833-89 Part No. Item Description Qty. P9943-14 Seat Covers 1 roll of 250 P9943-27 1 roll of 100 P9943-30 Tire / Trash Bag 1 roll of 500 P9943-02 Parts Bag 1 roll of 500 Plastic Floor Mats Jumbo Roll Dispensers • Dispenser fits all jumbo rolls • Portable - Move where you need it • Equipped with a serrated cutting edge • Made of sturdy steel tubing Part No. Item Description 680592 Wall Mount Jumbo Roll Dispenser 680590 Floor Stand Jumbo Roll Dispenser - Holds 1 Jumbo Roll P9943-94 Wall Rack Kit • Ideal in shops where floor space is a premium • Wall rack extension is also available P9943-53 • For rack only P9943-54 Part No. Item Description Qty. P9943-10 Seat Covers 1 box of 250 P9943-30 Parts Bag 1 roll of 500 P9943-02 1 roll of 500 P9943-36 Plastic Floor Mats 1 box of 250 Steering Wheel Covers (MSL-30) 104 Shop Supplies

Facility Supplies Breakroom / Lobby Part No. Cups Size Color Description LGBWKWHT8HCUP 8 oz. White LGDCC8J8 Hot Paper Cup 8 oz. White Hot/Cold Foam Cups 10 oz. White LGDCC10J10 Hot/Cold Foam Cups 12 oz. White LGDCC12J12 Hot/Cold Foam Cups Size Color Part No. Lids Description 8 oz. White BWKHOTW8 8 oz. White LGDCC8JL Hot Cup Lids 10-14 oz. White Foam Plastic Lids LGDCC12FTL Foam Vented Lids Part No. Napkins Size Color Description 537012 10” W x 12” L White LGBWK8311CT Premium Napkins, 1 Ply 7” W x 13.5” L White Lunch Napkins, 1 Ply 11” W x 13” L White LGMOR1250 Napkins, 1 Ply LGBWK951TEA LGBWK02600 Lobby Broom Lobby Dust Pan • Natural Broom, Red Handle, • 11-3/4” W Red Headband • Black Plastic • 3-Sew (MSL-10) • Corn/Fiber • 39” Length WWSD800 Wetworks® • Kills cold & flu virus +Plus Pre-Saturated Surface • Bleach-free and alcohol-free • Wipe 8 x 6 in. 800 wipes per roll (4 rolls/ Disinfecting Wipes case) (MSL-20) Shop Supplies 105

Facility Supplies Miscellaneous Office Batteries Part No. Description Size LGDURMN2400B2400 Duracell® Procell® Alkaline Batteries AAA LGDURPC1604BLD LGDURPC1300 Duracell® Procell® Alkaline Batteries 9V LGDURPC1400 LGDURPC1500BKD Duracell® Procell® Alkaline Batteries D Duracell® Procell® Alkaline Batteries C Duracell® Procell® Alkaline Batteries AA 397145 Utility Grade Duct Tape • Strong poly-coated backing • 9.5mL Refuse Can Liners Area Part No. Size Package Type Color Thickness 2024338 24” W x 33” L Coreless Roll Natural 5 micron Natural 10 micron 2030371 30” W x 37” L Coreless Roll White Black 0.7 mil. 2152407 24” W x 28” L Coreless Roll Black 1 mil. Black 1 mil. 2154001 40” W x 46” L Flat Pack 19 micron 2154301 42.5” W x 47” L Coreless Roll 2184319 43” W x 48” L Coreless Roll Part No. Facial Tissues Sheets Description 4312 100 Surpass® White Tissue 106 Shop Supplies

Facility Supplies Part No. Hand Soap Size Scent LGDIA02203 5 lbs. Unscented LGDIA02561 Description 5 lbs. Unscented LGDIA02709 Boraxo® Hand Soap, White Powder, Box 1 gal. LGGOJO95504CT Twenty Mule Team Boraxo® Hand Soap, White Powder, Box 1 Gallon 4/cs Floral Boraxo® Heavy-Duty Liquid Soap, Pink, Flat Top Pail 9.5” x 12” - 17319 Gojo® Natural Orange Pumice Hand Cleaner, Lotion, Pump Bottle 12.5” x 10.5” 76319 WypALL® Waterless Hand Wipes, Blue/Green, Pre-moistened, Pail Unscented WypALL® Waterless Hand Wipes, Refill, Blue/Green, Pre-moistened Unscented Hand Sanitizer / Handwash / Liquid Soap / Hand Wipes Part No. Description Scent Size L1UZA 7.5 oz LGGOJ965212CT Dial® Basics HypoAllergenic Hand Soap with Aloe Honeysuckle 16 oz 72865 7.5 oz TL2WPN Dial® Antimicrobial Liquid Soap, Clear Gel Light Floral 2L 4/cs. TL2HCK 2L 4/cs 50170 Dial® Complete Foaming Antibacterial Hand Wash Original 4 Gallon 7982753 2000ml 4/cs LGDIA06060 Power Wash 1 Ltr. LGDIA81033 1 Ltr. LGDIA88047 Kresto Cherry 1 Gal. 795161-PL 1250 ml. 795162-PL Hand Soap 1250 ml. 91476 130ct 4/cs Supromax Refill Dial® Basics HypoAllergenic Foam Lotion Soap Honeysuckle Dial® Complete Antimicrobial Foaming Hand Soap Cool Plum Dial® Antibacterial Liquid Soap Refill Gold/Floral Southern Soft® Luxury Foam Hand Soap, 3/cs Southern Soft® Antibacterial Foam Soap, 3/cs TB Pre-Moistened Wipes (MSL-10) Shop Supplies 107

Facility Supplies Restroom Mop Head/Dust Mops/Frame/Handles Part No. Description LGBWK609 60” Mop Handle, Hardwood LGBWK1136 36” x 5” Cotton/Synthetic Blend Mop Head LGBWK1436 36” x 5” Dust Mop Frame, Zinc-Plated LGBWK1490 60” Clip-on Dust Mop Handle LGBWK2020REA Rayon Mop Head, 20 oz. LGBWK2024CEA Cotton Loop Mop Head, 24 oz. LGBWK20724 24” PET Double Push Broom, Green LGBWKM365C 36” x 5” Dust Mop Kit Brooms/Dust Pans Part No. Description LGRCP637400BLA 35” Lobby Broom, Metal Part No. Odor Control Scent AWUS007-BX Description Mango AWUS235-BX Midnight Sky AirWorks® Premier Urinal Screen, Orange AirWorks® Premier Urinal Screen, Blue Toilet Seat Covers/Dispensers Part No. Description DS-5000 Health Gards® Half Fold, 250/pk, 20/cs HG-1-2 Health Gards® Half Fold Dispenser (MSL-10) 108 Shop Supplies

Facility Supplies Restroom Part No. Toilet Tissues Ply 7941200 Description 2 7942800 2 Toilet Tissue, Jumbo Roll, White, 12/cs Toilet Tissue, Standard Roll, White, 605 Sheets Part No. Towels Size 183260 Description 8”x 600 /6cs 183208 2 Ply Towel 8”x350 12/cs NP-5301 Roll Towel Brown 250/pack, 16pk/case NP-5505 White Towels, Multi-Fold NP-12350EN 6 Roll Case, 600 Sheets Roll,3600 SheetsPer Case 350’ x 7.8”, 12 rls/cs NP-12350EW Natural Roll Towels 350’ x 7.8”, 12 rls/cs NP-P100B White Roll Towel CP603 Packed 150 towels per sleeve, 16 packs per case 600’ x 10”, 6 rls/cs 43300 Premium White Center-Pull Towels 475’ x 7.8”, 12 rls/cs 43300-PLUS CCP Advantage Roll Towels 475’ x 8”, 12 rls/cs 43380 CCP Premium Roll Towels 800’ x 7.875”, 6 rls/cs Southern Soft® Roll Towels, White Part No. Handwash Dispenser Size Color 82119 Description 1250mL Gray 5279 1000mL Smoke Southern Soft® Foam Soap Dispenser, Gray Dial® Complete Foaming Soap Dispenser, Push-Type Part No. Towel Dispensers 794501 Description 794502 794503 Center Pull Towel Dispenser 794504 Southern Soft® Multi-Fold Centerfeed Dispenser, Black/Carbon Translucent 794228 Jrt Jumbo Disp Single Jrt Jumbo Disp Double Double Roll TP Despenser Part No. Toilet Tissue Dispensers 794228 Description 794503 794504 Standard Tissue Dispenser, Double Roll, Smoke Jumbo Roll Tissue Dispenser, Black/Carbon Translucent Jumbo Roll Twin Tissue Dispenser, Black/Carbon Translucent Shop Supplies (MSL-10) 109

Facility Supplies Shop Area/Shop Floor Part No. Absorbents Size AS-HPA-P 18” x 16” AS-INA-R1 Description 150’ x 28” AS-MAB-P ColdForm2 Pads, Two-Sided Laminated, Universal Heavy Weight, Gray 18” X 15” AS-MAA-P 18” x 16” AS-SG-3425-G ColdForm2 Rolls, Single Laminated, Universal Heavy Weight, Gray 34” x 25’ AS-SK65G TaskBrand® Universal Absorbent Pad, Gray AS-SRB-P 65 gal. ColdForm2 Pads, Single Laminated, Universal Medium Weight, Gray 18” x 15” Sure Grip® Adhesive Absorbent Mat, Needlepunch, Gray Universal Spill Kit, Single Laminated, Gray/Yellow ColdForm2 Pads, Single Laminated, Light Weight, Meltblown, Gray Towels Part No. Description Color Blue 2502-B-DZ MicroWorks® Standard Towel, 300 GSM, 16” x Gold 16”, 12/polybag White Yellow 2502-GOLD-DZ MicroWorks® Premium Towel, 360 GSM, 16” x 16”, 12/polybag 2511-W-DZ MicroWorks® Value Towels, 220 GSM, 16” x 16”, 12/polybag 2512-Y-DZ MicroWorks® Standard Towel, 300 GSM, 12” x 12”, 12/polybag Part No. Brooms/Handles LGBWK20724 Description LGBWK136 Boardwalk® Black Tampico Floor Brush, 2.5” Bristle Length Hardwood Broom Handle, 1” Diameter, Metal Tip/Aluminum LGBWK20436 Broom Handle, 57” L, 1-1/8” Diameter, Aluminum, Plastic Threaded End (MSL-10) Shop Supplies 110

Facility Supplies Shop Area/Shop Floor Part No. Wipers/Dispensers Size M24580 10” x 12” 644043 Description 13.1” x 12.6” 644053 Mighty Tough Towels, 200 Count, White 12” x 12.88” 680590 ShopWorks® W800 Wiper, Heavy Duty, Jumbo Roll, Blue 680590 ShopWorks® W800 Wiper, Heavy Duty, Jumbo Roll, Red 12.5” x 13” 680592 Wiper Dispenser, Jumbo Roll, Floor Stand, Blue Metal 9”x12.75” N-GV030JBW Wiper Dispenser, Jumbo Roll, Floor Stand, Blue Metal 12”x12” N-GE010IDW Wiper Dispenser, Jumbo Roll, Wall Mount, Blue Metal 9.75”x16.75” N-GE025FBW V30 Value Series Wipers, Plain Box, White, Jumbo Roll, Lightweight 12.5”x13” N-GE025IDW 10bx/cs N-GV030JBW Wipers 1 Ply N-GV030IDW2 Wipers 4 Ply 4/cs M24580 Wipers 4 Ply 9”x16.5” White 10/cs N-GV040IDW Wipers Jroll N-V040JPW IntFld Dispenser 12”x13” 750/roll N-GP050JBW Mighty Tough Towels 10”x13” White 1100rl N-GP060IDW 9”x16.75” 125bx/10cs N-GP060JBB Wiper 12”x13” JR 1100 roll N-GP070IDW JRoll 9”x16.75” 100bx/10cs N-GP070JPW V50 12”x13” 870 sheets/roll N-GP080ITW V60 12”x13” 870 sheets/roll 644053 V60 644825 V70 12”x13” 475/roll 644043 V70 12”x13” 475/roll V70 12”x13” 475/roll V80 Red Jroll V80 White V80 Blue Heavy Duty Wash Rack Hose (MSL-10) A rugged professional quality hose used by contractors, service station owners and in general shop applications. The multi- spiral polyester reinforcement keeps the hose flexible and kink-proof even in extreme temperatures and applications. Part No. Wash Rack Hoses Length (MSL-30) 00700058250 50 ft. 00700034250 Description 50 ft. 00700054350 5/8” I.D. Wash Rack Hose Coupled, Black 50 ft. 00700034350 3/4” I.D. Wash Rack Hose Coupled, Black 50 ft. 5/8” I.D. Hot Water Wash Rack Hose Coupled, Red 3/4” I.D. Hot Water Wash Rack Hose Coupled, Red Shop Supplies 111

Fillers & Funnels FAFGP-102 Form-A-Funnel • Diverts oil around obstacles to avoid drips and spills • Reshape and reuse hundreds of times • Works in temperatures from -30°F to 425°F • Easy to clean after use • Size: 14.5” L x 6.5” W (MTE-22) KTI74601-1 9-785 Long Rigid Funnel Steel Flexible Neck Funnel • Super deluxe transmission funnel • 5-1/2” diameter spout • Large capacity prevents overflow has 1/2” ID opening • 4-1/2” ID x 19-1/2” long • #80 mesh screen • Galvanized finish BIB40609 9-807 5 qt. Plastic Measurer 2.5 Gallon Radiator Filler • Handles most automotive fluids Plastic filler is unaffected by • Translucent high density plastic grease, oil, gas or antifreeze. • Flexible spout (MSL-30) 112 Shop Supplies

Fillers & Funnels LING525 (MTE-21) Flexible Spout Measuring Can (MTE-22) • 5 qt. draining capacity (MTE-21) • 14” Flexible spout allow for one hand operation • Thumb operated control valve can be locked into position 113 • Rolled top edge to help prevent spilling PLW75-030 Plastic Battery Filler • Replenish battery water the easy way • Stops surface discharge caused by wet battery • Automatic shut-off • Holds up to 2 quarts KTI49405 Universal Drum Plug Bung Wrench • One-piece construction for long-lasting durability • Use to open and close all steel and plastic hex-head & round-head bung nut plugs • Corrosion resistant MITMV6835 Vacuum Brake Bleeding Kit • Operates with compressed air to bleed up to 2 quarts per minute • Large 1.9 qt. capacity fluid collection reservoir • Includes automatic master cylinder refill kit with 40 oz. reservoir • Features swivel air inlet with quick disconnect • Two refill kit styles ensure a fit to all makes and models Shop Supplies

Floor Mats Mighty Logo Floor Mats Part No. Description Weight Quantity M9PP1980 Mighty Logo, Coated, 17” x 19” 80# 500 per box M3PP2280 Mighty Logo, Coated, 17” x 22” 80# 500 per box Footprint Floor Mats Part No. Description Weight Quantity 4PP1980* Thank You Boot Print, Coated, 17” x 19” 80# 500 per box 3PP2280* Thank You Boot Print, Coated, 17” x 22” 80# 500 per box Plastic Floor Mats Part No. Description Quantity FM-3-H Floor Mat - Plastic Footprint 500 per roll PFM-500P 500 per roll Plastic Coated Floor Mat Part No. PFM-500 Paper Floor Mats Quantity 500 per roll Description Floor Mat - Paper Footprint *Custom printing available (MSL-30) 114 Shop Supplies

Gloves & Sleeves Mighty Black Nitrile Glove • Strong black color, superior strength • Chemical resistant nitrile glove • Powder free & latex free • Textured surface • 9” long, 5 mil thick • Mighty part number series: NG99xx Mighty Black Nitrile Glove • Strong black color, superior strength • Chemical resistant nitrile glove • Powder free & latex free • Textured surface • 9” long, 4.5 mil thick • Mighty part number series: NG79xx Mighty Blue Nitrile Glove • Chemical resistant nitrile glove • Available in powder and powder free • Textured surface • 9” long, 4 mil thick • Mighty part number series: NG56xx Mighty Heavy Duty Latex Glove • Powder free • Fully textured surface secure grip wet/dry • 9” long, 8 mil thick latex gloves • Mighty part number series: LG22xx Mighty Latex Glove • Low cost hand protection • Available in powder and powder free • 9” long, 5 mil thick latex gloves • Mighty part number series: LG11xx (MSL-30) LIS18700 Kevlar® Hot Sleeve (MTE-21) • Protects arms from burns while working around the engine • Made of durable, heat resistant Kevlar • Double-wall construction for added heat protection • Works on both right and left hands and washable Shop Supplies 115

Hand Cleaners & Dispensers MN158 MN151 HomeRun Heavy Duty Mighty Cherry Scrub Hand Cleaner • Heavy Duty Cherry Scented Hand Cleaner Fortified with mild, low odor solvent and • Contains micro scrubbers to clean pumice to help remove tough soils the toughest soils. without irritation. • Produces a rich lather and will • Pleasant cherry scent helps to neutralize not dry or crack skin. residual odors of diesel, petroleum or other products from hands. • Enriched with skin conditioners. • Solvent-free. • Includes skin conditioning ingredients to • Case 4 x 1.25 Gallon – uses 61130 dispenser. keep hands from drying and cracking. MN148 • Case 4 x 4 Liter – uses 61163 dispenser. Scrubber Hand Cleaner MN155ZZ • Quickly and thoroughly penetrates,liquifies Mighty Gruff Hand Cleaner and removes stubborn soils such as grease,tar, asphalt,and paints • Quickly penetrates and removes oil, grease, dirt and ink. • Fortified with pumice • Tough on dirt; mild on hands • Enriched with skin conditioners. • Case 6 x 1 Gallon – uses 61129 dispenser. • Pleasant wintergreen scent. • Case 6 x 1 Gallon – uses 61129 dispenser. MN138 Mighty Soy Scrub Citrus 5555-MIGHTY Hand & Nail Brush • Formulated with soy ingredients and walnut shells to quickly cut through the heaviest (MCM-60) greases and oils while not drying the skin • Our best seller! • VOC Compliant. • Fresh citrus scent. • Case 4 x 4 Liter – uses 61163 dispenser 116 Shop Supplies

M93701 Hand Cleaners & Dispensers Mighty Dispenser SOL2LT • 2-Liter non-foaming Solopol® Classic • Can be used with • Solvent-free hand cleanser with natural scrubbing agent for removal of heavy contamination standard light-duty • Contains Eucornol® to minimize the risk of skin irritation and heavy-duty • Orange fragrance products. • 2 liters KCL2LT Kresto® Classic • Specialist solvent based super-heavy duty cleanser with Astopon® natural scrubbing agent and Eucornol® emul- sifying active • Ideal for difficult to remove and deeply ingrained oil based contaminents • 2 liters HAB2LT Estesol® Hair & Body • Pleasantly fragranced hair and body shower gel • Suitable for use in male or female shower areas • EcoLogo certified and BioPreferred designated • 2 liters Kresto Cherry Hand Cleaner • Special cherry-scented super duty hand cleanser with solvent and non-aggressive natural scrubbing agent for extra heavy-duty skin cleansing, ideal for the toughest industrial dirt • Cherry fragrance neutralizes petroleum odors on hands • Contains toxicologically safe solvents to lift difficult to remove oil- based contaminents without harming the skin • Sizes: 2,000ml, 1 gallon, 2 liter cartridge, 4 liter cartridge KCH1G 99027563 KCH2LT IFC1L InstantFOAM™ Complete • Highly effective, perfume-free and dye-free alcohol based foam hand sanitizer • Kills up to 99.9999% of many types of common germs in 15 seconds • Ideal as a preventative action or as part of an outbreak measure • Glove compatible. Compatible with the SAN1LDS dispenser (MSL-20) (MSL-20) Shop Supplies 117

Hand Cleaners & Dispensers ANT1L Refresh AntiBac FOAM • Perfumed antibacterial hand wash. Benzalkonium chloride based formula helps cleanse the skin and kill bacteria. • Contains skin conditioners - helps the skin feel smooth and form after use. • Mild Formulation - ideal for frequent use. • Triclosan Free Formulation AZU1L Refresh Azure FOAM • Highly quality silky smooth foam. • Pleasantly fragranced foam. • Contains Glycerin - a skin moisturizer to help improve skin hydration and prevent drying, leaving the skin feeling smooth and firm after use. 91128 FOAM Dispenser GPF3LNA GPF3LDQ Solopol GFX Solopol GFX Dispenser • High efficiency in use - provides up to 42% more (MSL-20) hand washes per liter compared to traditional hand washers. • USDA BioPreferred, UL EcoLogo and Green Seal Certified. • Unique patented foaming technology. • Contains cornmeal and olive pit scrubbing agents. • Contains Glycerin. • No Silicone. 118 Shop Supplies

Lighting & Electrical 14-923 XLIGHT XLIGHT is a high-power LED work light designed for hands-free operation in tight spaces. The compact size, flexible neck and clamp-on style handle make this versatile utility light a must-have for any shop. The LED pro- vides 80-100 illumination. Attach the high-tension clamp handle to a tire bead and this light is ideal when performing tire repairs. 79232 (MTE-39) Dura-Wedge Rechargeable Work Light • 24 SMD LED’s: Provides up to 1000 Lumens • Includes dimming feature down to 80 Lumens • Operates corded or cordless (3 hrs. at max power) • Rugged molded housing for high impact protection • Water resistant 86689C Kit Includes: Automotive Electrical Repair Kit • Wire stripper-terminal crimper tool • Assorted wire clamps • Long nose pliers & cutter tool • Wire ties • DC voltage tester • Assorted hook and loop ties • Screwdrivers with insulated shafts • Fuse puller • Black and red test leads • Assorted automotive fuses • Electrical tape - 18 gauge wire • Quick splices • Twist-on wire nuts • 399 pieces (MSL-30) Cable Ties EZRXL3300 Xtreme Rechargeable Made from durable nylon construction Work Light, 450 Lumen Great for automotive electrical and other underhood uses • COB rechargeable work light • 2nd generation of XL3000 83740 4” Natural • 100% field repairable 83741 4” Black 83742 8” Natural (MTE-22) 83743 8” Black 83744 11” Natural 83745 11” Black 83747 14” Black Packaged 100 per bag (MSL-25) Shop Supplies 119

Safety Products Sidewinder Safety Glasses Part No. Lens Strength w/Magnification Lens SAS541-1500 1.5x SAS541-2000 2.0x • Diopter lenses SAS541-2500 2.5x • 5 magnification strengths SAS541-3000 3.0x SAS6100 Foam Ear Plugs (Box of 200) • Pre-shaped foam ear plugs • Super-soft ear plugs conform to the inner ear canal SAS6101 - Corded Ear Plugs • Super-soft foam ear plugs conform to the inner ear canal • Reusable • Come with cord and store case SAS6102 - Corded Ear Plugs • Lightweight, comfortable reusable banded plugs • Easy to put on and take off (MTE-21) SAS6105 - Standard Earmuff Hearing Protection 120 • Lightweight muff-style hearing protector • Universal adjustment • Under the chin, over the head or behind head wear Shop Supplies

Safety Products SAS5110 - Overspray Goggles • Impact resistant polycarbonate lens • Anti-splash: special vents prevent liquid from getting into eyes • Sportstyle design with wide elastic headstrap • Anti-fog coating on lens • 99.9% UV protection SAS5140 - Standard Face Shield • High impact polycarbonate lens • Curved injection molded lens • Ratcheting adjustable headpiece • Meets ANSI Z87.1 • Not for welding 2170FA - ProWorks® 16 Gallon Eyewash Station SAS5134-00 - Portable • Complete with steel wall bracket • Quick one step activation that Eyewash Station delivers a 15 minute flow • Wall mountable, • One hand operation • Holds 9.11 gallons of water no plumbing required • Gravity fed, no pulmbing required • Provides 15 minute flushing period 2172FA ProWorks Dual Bottle Eyewash Station • For use with eyewash station #2170FA • Two sealed, sterile bottles of eyewash Back Support Belt Part No. Size ERG11092 Small • Tapered design allows a full range of body ERG11093 Medium motion while maintaining proper support ERG11094 Large ERG11095 X-Large • Made of lightweight, cool, washable nylon • Adjustable, detachable suspenders keep back support brace in place • Waist size ranges from 25in. to 58in. Shop Supplies (MTE-21) 121

Safety Products Mechanix Wear Original Gloves • Redesigned finger tip pattern reduces seams and enhances finger tip sensitivity • Lycra panels between fingers for added comfort and mobility • Narrower elastic cuff for added comfort • Dual-layered fingertips and thumb for reduced wear and increased protection • Smooth surface thumb and index finger point of contact, improves handling Part No. Size Color Part No. Size Color MECMG-01-008 Small/8 Yellow MECMG-03-008 Small/8 Blue MECMG-01-009 Medium/9 Yellow MECMG-03-009 Medium/9 Blue MECMG-01-010 Large/10 Yellow MECMG-03-010 Large/10 Blue MECMG-01-011 X Large/11 Yellow MECMG-03-011 X Large/11 Blue MECMG-02-008 Small/8 Red MECMG-03-012 XX Large/12 Blue MECMG-02-009 Medium/9 Red MECMG-05-009 Medium/9 Black MECMG-02-010 Large/10 Red MECMG-05-010 Large/10 Black MECMG-02-011 X Large/11 Red MECMG-05-011 X Large/11 Black MECMG-02-012 XX Large/12 Red MECMG-05-600 - Mechanix Wear Apron Black • Made from durable, pliable 100% cotton • Extra-wide pockets with hook and loop flaps to secure tools • Neck and waist straps for maximum comfort and adjustment • One size fits all Gen-Nex Painter’s Coverall Part No. Size SAS6853 Large • Manufactured from lightweight polypropylene SAS6854 X-Large • Liquid-proof barrier protects against Iscoyanate- based coatings • Full zipper front and elastic wrists • Anti-static, heat dissipating cloth-like fiber • Non elastic ankle cuffs SAS6939 Moonsuit Nylon / Cotton Coveralls (X-Large) • Lightweight, durable, rip-stop nylon front • Breathable, cool cotton back • Full pullover hood, zipper front and elastic waist • Washable and reusable • Velco wrist and ankle enclosures (MTE-21) Shop Supplies 122

LIS21260 Safety Products Kevlar® Burn Protection MECMHS-05-500 Arm Glove Kevlar Sleeves w/ Thumb Hole • Total hand and arm burn protection • Heat resistant material protects hands & arms from • Designed to repel oil, fuels and other liquids, supplying a protective barrier for hot surface optimum safety • Works on both right and left hands • Washable • Provides maximum protection from your • Glove portion is coated with a vinyl tread for greater knuckles to your biceps gripping power • Extends to 24” SAS2985 HY8812 Non-Toxic Dust Mask ProWorks® Disposable Particulate Respirator • Protects against non-toxic dusts, powders, pollen and other common airborne particles • NIOSH N95 approved • Inner foam provides a custom seal • One size fits all SAS6000-75 SDS Compliance Center • Compliance made easy • Easy installation • Hi-visibility • Complete OSHA compliance • Expandable • Wall mount First Aid Kits • Contains an assortment of practical, single-use disposable items to treat injuries in a sanitary and simple way • Lightweight, wall-mountable and water-resistant plastic case Part No. Description SAS6025-01 First Aid Kit for 25 employees CSU2729 Burn Spray - 2oz. Pump 2018FAK-A Class A Minimum Fill First Aid Kit 2018FAK-B Class B Minimum Fill First Aid Kit FSPK2 Standard Infection Kit FSPK24 Single Usage Kit - First Aid Protection Kit FSSK12 Single Usage Kit - Blood Spill Clean-Up AS-ACBW-K Single Usage Kit - Fluid Clean-up Kip Shop Supplies 123

Service Items Parts Bags Part No. Description Weight Quantity P9943-30 Clear Parts Bag 11” x 17” 1.1 mil. 500 per roll P9943-55 Clear Parts Bag 12” x 22” 1.1 mil. 500 per roll P9943-56 Clear Parts Bag 14” x 22” 1.1 mil. 500 per roll P9833-23 Rear Wiper Blade Protectors 3” x 27” 1.5 mil. 1.5 mil. Tire/Storage Bags Part No. Description Weight Quantity P9943-27 Standard Tire Bag - 24+ 12”x 40” .8 mil. 100 per roll P9943-29 Standard Tire Bag - 24+ 12”x 40” .8 mil. 250 per roll P9943-28 1.25 mil. 100 per roll P9933-92 Large Tire Bag - 33+ 6” x 44” .8 mil. 250 per roll P9933-91 Large Tire Bag - 33+ 6” x 44” 1.25 mil. 125 per roll Extra Large Tire Bag - 32+ 15” x 48” Key Tags Part No. Description Work Ticket P9933-23 White Key Tag - 4.5” x .75” Holders P9933-24 Yellow Key Tag - 4.5” x .75” P9933-98 Blue Key Tag - 4.5” x .75” Part No. Size P9933-99 Red Key Tag - 4.5” x .75” P9833-13 Paper Key Tag with Metal Ring All tags P9933-02 10.5” x 14.5” P9933-50 1,000 per box. Rings Only 250/bag P9933-03 11” x 13” All Holders 25 per box. Fender Covers Unique design and construction provides grip and cushioning. Large 2’ X 3’ surface grabs small parts and tools. Part No. Description Quantity P9933-43 Blue with no Logo 10 per box P9933-83 Red with no Logo 10 per box P9933-84 Black with no Logo 10 per box (MSL-30) Shop Supplies 124

Shop Supplies Part No. Digit Series Dispatch Numbers Part No. Digit Series P9933-50 000-999 P9933-55 5000-5999 P9933-51 1000-1999 P9933-56 6000-6999 P9933-52 2000-2999 P9933-57 7000-7999 P9933-53 3000-3999 P9933-58 8000-8999 P9933-54 4000-4999 P9933-59 9000-9999 LOCTITE® Thread Treatments Offering a complete line of thread treatment products to the professional technician. Loctite products are designed to pro- vide automotive repair solutions with revolutionary methods of positively locking and sealing threaded fasteners. • Threadlockers and thread sealants • Retaining compounds • Adhesives • Gasketing • Lubricants (MSL-30) XB25D Floor Cleaner Spill King™ Absorbent MN152 - 100 lb. drum MN153 - 50 lb. drum • One absorbent for multiple types of spills MN154 - 25 lb. drum • Use less to clean up more (15 times more • Soaks down into grease than clay) • Cleans battery terminals, steel, • One step clean-up saves time • Environmentally safe EPA & OSHA compliant iron and aluminum parts • Non-abrasive • Powder concentrate • Up to 20 times lighter than clay-based • Pleasant scent, dust free • Will not leave residue products (MSL-20) 20582671 Commercial Premium Rubber Hose • Reinforced for high burst strength • Abrasion and weather resistant • Crush resistance brass fittings • Burst Pressure: 350 PSI • Temperature: -40ºF to 160ºF • Length: 50’ • Size: 5/8” (MSL-30) Warranty Seal™ 1.8 oz. Part No. Color 12848ZZ Yellow • Visually detect any movement or tampering once a component has been marked Blue 12855 Red • Quick lubes use to prevent drain plug tampering 12886 White 12978 • Transmission shops use to protect warranties (high temp resistant) • A/C techs use to prevent refrigerant tampering and dries fast • Adheres to all metal and other surfaces (MSL-5) Shop Supplies 125

Shop Supplies Top Absorbent Rolls/Pads Seller Part No. Description #1 25201 PIG® Universal Light-Weight Absorbent Mat Roll 15” x 50’ PIG® Universal Medium-Weight Absorbent Mat Roll 30” x 150’ #2 25400 57703 PIG® Universal Mat Rolls with Dispenser Part No. Description Quantity #3 25300 100 per box PIG® Universal Medium-Weight #4 25100 Absorbent Mat Pad 15” x 20” 100 per box PIG® Universal Light-Weight Absorbent Mat Pad 15” x 20” Spill Kit 25205 PIG® Universal Light-Weight Absorbent 5-Pack • Made specifically for shop liquids • Perforated for easy tearing • Hi-Viz yellow portable bag • Absorbs up to 5 gal. • Moldable socks surround equipment, drums or tanks and contain spills to keep them from spreading into walkways; also great for catching liquid that seeps under overhead doors Part No. Description 45300 PIG® Universal Spill Kit - 5 Gallon 45301 PIG® Universal Spill Kit Bucket 25101 (MSL-9) PIG® Universal Light-Weight Absorbent Mat Tablet • Convenient pop-up tabs let you hang the tablet any- where you need it • Fixed number of pads; great for watching and controlling inventory for individual tech use • Can be air-dried for reuse when soaked with water or washer fluid • 15.5” W x 19” L • 15 pads per tablet • Absorbs up to 1 gal. per tablet; 8.5 oz. per pad 126 Shop Supplies

Shop Supplies Eliminate the hassle of rubber-backed floor mats, or cost of rental mats. Make the switch to Grippy® Absorbent Floor Mats. This adhesive backed, commercial grade floor mat lasts up to 12 weeks and is easy to replace Part No. Description 25820 PIG® Grippy Absorbent Mat for Workbenches 21” x 7’ GRP36206-BK PIG® Grippy Floor Mat Starter Pack - Black GRP36206-GY PIG® Grippy Floor Mat Starter Pack - Gray Additional lengths available! (MSL-9) PIG® Universal Light-Weight Absorbent Drum-Top Pads • Precut with holes for 3/4” and 2” bungs to provide a Part No. Qty. perfect fit on steel 55-gallon drum tops 25102 5 per pkg. 25103 20 per box • Soak up overfill and pump drips to keep them off floors without cluttering up your shop with dirty rags Water-Repellent Pads/Rolls • Floats to clean up oil-based liquids on water • Use outdoors or indoors • Light-Weight is compact, grab-and-go size • Rolls are ideal for covering large areas and supplying smaller pads for spill cleanup #5 Description Quantity Part No. PIG® Water-Repellent Oil-Absorbent Medium-Weight Mat Pad 15” x 20” 100 per box 26300 100 per box 26100 PIG® Water-Repellent Oil-Absorbent Light-Weight Mat Pad 15” x 20” 26400 PIG® Water-Repellent Oil-Absorbent Medium-Weight Mat Roll 30” x 150’ 1 roll Shop Supplies 127

Static Cling Label Printer Professional Service Reminder Program GX001-05 Service Reminder Kit • Print your customer’s reminder labels the professional way • Eliminate the hassle and worry regarding tech’s handwriting • Use 24 pre-programmed label designs • Complete kit functions as a stand alone unit • Includes printer, keyboard display, 3 year parts and labor warranty (6 mos. on print head), 1 ribbon Accessories and Labels P9944-02 M7505-02 Replacement Ribbon Mighty Sticker Kit (Prints approx. 1,500 labels) Contains two rolls of labels (500 per roll) and one ribbon. Ask about custom options! M7505-03 P9933-45 P9933-94 (MSL-30) Mighty Label Red Oil Can Label Blue Wrench (500 Roll) (500 Roll) (500 Roll) 128 Shop Supplies

Tool Storage EXTPWS4124RCTXRD Red 41” Deluxe 11-Drawer Roller Cabinet • Red textured, weather-resistant finish • Drawers use ball-bearing glides load rated 100- 200 lbs./drawer • 5” x 2” casters; load rated 550 lbs. per caster • Raise and release drawer pulls • Tubular theft-resistant lock and keys LUXSEC111HD-G Luxor E Series Three Shelf Utility Cart • 4” Full swivel casters, two with locking brake • 400 lb. weight capacity (evenly distributed) • Lifetime warranty • Three tub shelves (18” D x 24” W per shelf) • Ergonomic push handle molded into top shelf Tool Chests & Cabinets • 54” 8-drawer Pro Series tool chest • 1,200 lb. weight capacity • Powder coating finish for extreme durability • Tool cabinet features 10 drawers • Single ball bearing slides for middle drawers and double ball bearing slides for 2 top and bottom drawers • 1 year warranty on material and workmanship Part No. Description KTI75154 Red Tool Chest KTI75155 Black Tool Chest KTI75156 KTI75157 Red Cabinet Black Cabinet Shop Supplies (MTE-21) 129

Notes Notes 130 Shop Supplies

General Repair A/C Service Items ......................................................... 132-135 Alignment Parts ................................................................... 136 Autolite® Spark Plugs........................................................... 137 Automotive Hardware, Epoxies & Sealers.......................... 138-140 Brake Pads & Shoes........................................................ 141-142 Brake Drums & Rotors.......................................................... 143 Calipers/Hub Bearings.......................................................... 144 Chassis Parts................................................................. 145-146 Fuses.................................................................................... 147 Fuse Assortments & Flashers.................................................. 148 Hoses................................................................................... 149 Hose Clamps & Rack.............................................................. 150 Line Repair Kits............................................................. 151-152 Tire Service.......................................................................... 153 TPMS Transmitters & Programmers................................. 154-159 TPMS Accessories................................................................. 160 Wheel Weights.............................................................. 161-162 Wheel Weight Tools.............................................................. 163 General Repair 131

A/C Service Items A2016 A/C Maintenance Assortment A2005 A/C Maintenance Assortment (Designed for 2000-2016 Vehicles) • Refillable A/C parts system loaded with over • Refillable A/C parts system loaded with 150+ SKUs of 700 service parts over 840 service parts • Domestic, Asian and European • Custom designed and labeled assortments are available • Coverage from 1999 to current to fill specific needs • R-134a service caps, valves, primary seals, slim • O-Rings, valves, service caps, seals, washers, orifice line and sealing washers, Chrysler gaskets tubes, gaskets and more • Full o-ring coverage • Heavy duty portable cabinet • Heavy-duty portable cabinet comes with handle and snap-locking cover and 8 boxes Ester Oil • Synthetic Ester lubricant provides excellent lubricity and compressor protection • Includes additives to prevent acid formation and corrosion • Includes o-ring conditioner, anti-wear and anti-oxidant additives • Compatible with PAG, mineral oils, R-134a and R-12 Part No. Description E8 8 oz. with U/V dye E8-DPE 8 oz. with U/V dye and performance enhancer E7 8 oz. without U/V dye E31 Quart with measuring indicators and without U/V dye E31-PE Quart with performance enhancer PAG Oil • Advanced high performance synthetic PAG provides excellent resistance to moisture • Contains conditioners, inhibitors and anti-wear agents for excellent lubricity and compressor protection; it also reduces compressor wear Part No. Description Please refer to the VS7 Cooling Section P468D 46 Viscosity 8 oz. with U/V dye for additional A/C chemical offerings. CL115 46 Viscosity 32 oz. with U/V dye P1008D 100 Viscosity 8 oz. with U/V dye CL116 100 Viscosity 32 oz. with U/V dye P1508D 150 Viscosity 8 oz. with U/V dye CL117 150 Viscosity 32 oz. with U/V dye P468 46 Viscosity 8 oz. w/o U/V dye P4632 46 Viscosity 32 oz. w/o U/V dye P1008 100 Viscosity 8 oz. w/o U/V dye P10032 100 Viscosity 32 oz. w/o U/V dye P1508 150 Viscosity 8 oz. w/o U/V dye P15032 150 Viscosity 32 oz. w/o U/V dye 132 General Repair

A/C Service Items A/C Ultraviolet Leak Detection Dye Effective in R-134a and R-12 refrigeration systems. Detectable when exposed to U/V light. Compatible with PAG, ester and mineral oils. Part No. Description 9497 Treats 4 vehicles with 1 oz. bottle D1 Single application pack 1/4 oz. package D4 Treats 16 vehicles with 4 oz. bottle CL113 Treats 32 vehicles with 8 oz. bottle Multi-Purpose Ultraviolet Dye Concentrate Effective with motor oil, hydraulic fluid, power steering fluid, brake fluid, diesel fuel, gasoline and transmission fluid. Detectable when exposed to U/V light. Mix 1/4 oz. per quart of fluid Part No. Description TD-8 Self measure 8 oz. bottle 16525 Total Dye (single application) 1 oz. 27408 High Powered U/V Leak Detection Light With Glasses • Illuminates fluorescent dyes brilliantly • High intensity beam makes even small leaks visible and is bright enough to used in low light as well as daylight and brightly lit areas • LED has extra-long life and produces an intense UV light • Fluorescence enhancing glasses makes leaks easy to spot • Glasses are designed with super luminescence so leaks are easier to spot (MSL-5) General Repair 133

A/C Service Items R-134a • Quick and easy way to add oil charge to R-134a A/C systems • Single application can • Includes o-ring conditioner, proprietary anti-wear and anti- oxidant additives • Available in universal PAG oil or ester 40292 40315 • 3 oz. 64823-BH R-134a Plus with applicator • Synthetic additive package provides maximum cooling performance • R-134a refrigerant charge • Synthetic lubricant charge • Performance enhancer provides colder air faster • System safe leak sealer stops small leaks in rubber hoses, gaskets and o-rings • UV leak detection dye • Anti-wear additives reduce wear and extend compressor life • 19 oz. 24278 E115 9473 Ester Oil Charge Speedy Charge Quick and easy way to add Ester oil • Quick and easy A/C system charge to R-134a A/C system charge Includes: • U/V leak detector dye • Adds 11 oz. R-134a & 3 oz. • O-ring conditioner lubricant • Anti-wear • Anti-oxidant additives • U/V dye helps pinpoint A/C • Compatible with PAG & mineral oils leaks • 4 oz. • Leak sealer helps stop A/C leaks on rubber hoses, gaskets, seals and ALL types of o-rings • 14 oz. ST22 Super Leak Stop U/V • Does not contain polymers; will not harm A/C system components, reclamation or recovery machines • One can or bottle treats one vehicle • Will not clog orifice tubes • ST22 and STOP install easily using oil injector • 2 oz. (MSL-5) 134 General Repair

A/C Service Items A/C Flush Tools • Waste fluid drain hose • Reusable and sealable bucket with instructions Part No. Description FB2 Flush in a Bucket 24-1496 Flush Hose Extra Flush Part No. Description EFQ Quart Premium quality fast evapo- EFG Gallon rating flush. Extremely 28184 Aerosol 20.5 oz. effective cleaner. Removes old oil and other contaminants. Compatible with R-12, R- 134a, and R-1234yf. Extra Flush II Part No. Description EFQ2 Quart Premium quality fast evaporating flush designed to EFG2 Gallon remove stop leak agents, old oil, and other contami- nants. Microthin coating remains to protect compo- nents against harmful stop leak chemicals. Compat- ible with R-12, R-134a, and R-1234yf. Fast Flush Part No. Description FFQ Quart Value priced flush. Very effective FFG Gallon cleaner. Removes old oil and other contaminants. Compatible with R-12, R-134a, and R-1234yf. Extra Flush Part No. Description 22762 Quart Rapid action flush with no residue. 22779 Gallon Quickly penetrates and removes oil and other contaminants from A/C components. Universal High Side Filter (MSL-5) 13128 135 • OEM tested and approved • Single kit fits 5/16,” 3/8” & 1/2” lines • Captures debris in the A/C system General Repair

Alignment Parts Specialty Alignment Parts Proper wheel alignment promotes even tire wear, responsive vehicle handling and safe braking. All passenger cars and light trucks allow for certain adjustments to ensure a vehi- cle is properly aligned. For those times when factory adjustments aren’t enough, Specialty Products has over 1,200 application specific alignment parts that enable the technician to set the vehicle to factory specifications, ensuring maximum alignment performance. 24160 23100 Change camber and caster with these application specific adjusting sleeves. Ideal for most light trucks and SUVs. EZ Shims are one piece, full contact shims for adjusting toe and camber. Four shim kits available - 75200, 75400, 75600 and 75800. 67115 23510 Assortments include the most popular shims, camber kits Adjustable ball joints offer the perfect and sleeves for the most common vehicle applications. solution for adjusting camber on vehicles • 88210 Truck Sleeve Assortment • 88260 Passenger Car Shim Assortment with upper control arms. • 88270 Light Truck/SUV Assortment • 87910 Tool Board Assortment Training Available: • Local Field Clinics – ASE Certified trainers provide the newest technology in alignment and suspen- sion training for new model vehicles. Topics include adjustment methods, problem solving and service procedures. • Local Hands-On Clinics – These clinics are designed for technicians of all skill levels. This training features the most advanced procedures for performing proper alignments, diagnostics and repair. Caster Camber Toe General Repair (MCA-10) 136

Autolite® Spark Plugs Spark Plugs Copper Core Platinum • Copper Core center electrode, Nickel • Copper Core center electrode, Nickel Chromium Alloy side electrode Chromium Alloy side electrode for excellent heat dissipation and for excellent heat dissipation and durability durability • Resistor reduces radio frequency • OE approved interference and electrode erosion • Optimizes engine performance with Double Platinum greater fuel economy and quicker acceleration • OE design for DIS systems • Full Platinum Tips - platinum on both XP Xtreme Performance center and side electrodes for reduced • IRIDIUM ENHANCED center electrode for gap wear improved durability and wear resistance • Optimizes engine performance, longer life, improved fuel economy and easier starts • OE form, fit and function • More focused ignition for better flame kernel growth and faster fuel combustion for better engine performance. (MEM-81, 84) Mighty Ignition Products • Distributor Caps (MEM-27) • Ignition Modules & Pickups (MEM-57) • Distributor Rotors (MEM-30) • Spark Plugs (MEM-81/84) • Ignition Coils (MEM-54) • Wire Sets (MEM-96) General Repair 137

Automotive Hardware, Epoxies & Sealers Automotive Repair Assortments 8629RCP 8674RCP Flange Bolts Crimp & Seal Wire • Contains 24 different sizes Terminals • 229 total pieces • Includes hex flange nuts • Contains 29 different sizes • 270 total pieces and bolts • 22 through 12 gauge • Red plastic 24 hole tray • Red plastic 24 hole tray 8680RCP 8714RCP Heat Shrink Tubing Skid Plates • Contains 7 different sizes • Contains 23 different items • 74 total pieces • 420 total pieces • Size range – ⅛” to 1” • Hole size – 5.6 mm to 8 diameter, 6” length mm • Dual Wall • Covers Models for Honda, • Red plastic adjustable tray Nissan, Toyota & VW • Red plastic 24 hole tray 8804RCP Assortment Bolt Bin Battery Terminals This heavy-duty wall mounted fastener assortment comes complete with 2,000 • Contains 9 different sizes nuts, bolts and washers, a 40 hole bin • 56 total pieces rack and part number labels. Sizes include • Repair kit for battery ¼” to ⅝” USS cap screws, hex nuts, flat and locking washers. cable ends • Red plastic adjustable tray Standard & Metric 40 Hole Bolt Bin Assortments Part No. Bolts & Nuts Washers Diameter Length Labels 8703RA 8705RA USS Grade 8 Flat & Lock 1/4 to 5/8” 1/2 to 4” Set #12406 8707RA 8711RA SAE Grade 8 Flat & Lock 1/4 to 5/8” 1/2 to 4” Set #12495 8712RA 80373 USS Grade 5 Flat & Lock 1/4 to 5/8” 1/2 to 4” Set #12560 80399ZZ Metric Class 8.8 Flat & Lock 6 to 14 mm 20 to 70 mm Set #12564 Metric Class 10.9 Flat & Lock 6 to 14 mm 10 to 60 mm Set #12566 40 Hole Bin - Empty 12 Inch Bin Stand Over 170 Assortments Available! (MSL-25) 138 General Repair

Automotive Hardware, Epoxies & Sealers Body Shop & Fastener Assortments Mighty’s Master Assortment We can put together any of your assortment needs. Contact your Mighty representative for additional details on Mighty’s automotive fastener program. 8681RCP 8684RCP Metric Hex Body Bolt Automotive Pop Rivet • Contains 14 different sizes Assortment • 345 total pieces • 380 total pieces • Length – 6 mm to 40 mm • Aluminum and steel rivets • Diameter – 5 mm to 10 mm • Hole sizes – ¼” to ½” • Red plastic adjustable tray • Red plastic adjustable tray 8692RCP 8694RCP Push Retainer Assortment Toyota Assortment • Contains 22 different sizes • Contains 16 different sizes • 560 total pieces • 345 total pieces • Contains nylon grommets, • Hole sizes – 4.5 mm moulding clips, hood clips, push retainers, door panel to 12.7 mm clips & u nuts • Covers GM, Ford & Chrysler • Red plastic adjustable tray • Red plastic adjustable tray Over 170 Assortments Available! General Repair 139

Automotive Hardware, Epoxies & Sealers Epoxies and Sealers Dual Component Seam Sealers IES8612 Intermix 5 Seam Sealer IES8405 Intermix 10 Bare Metal Sealer A non-sagging, firm, semi-flexible adhesive/ IES8612 Intermix 5 Seam Sealer sealant used for sealing vertical and horizontal seams and joints. Excellent adhesion to bare metal, primed metal, SMC, FRP, fiberglass, aluminum and most plastics. Single Component Seam Sealers IES1586 Sprayable Seam Sealer IES1565P Integra-Gray Polymeric Sealer A permanently flexible rubber base sprayable IES1586 Sprayable Seam Sealer seam sealer formulated to duplicate automotive OEM coarse textured and beaded seams. Paint- IES1589G Inter-Seam Sprayable Sealer able when cured and has excellent adhesion to metal, galvanized steel, rigid plastics, fiberglass and aluminum. Contains no silicone. IES8440 Plastic Repair IES8440 IES8416 Quickie-Fix 40 Repair Adhesive Quickie-Fix 40 Repair Adhesive Intermix 5 Hi-Stress Epoxy A fast set epoxy repair compound used for bonding, filling and finishing. Used on plastics, FRP, SMC, fiberglass and metal parts. Ideal for plastic tab replacement. Excellent bonding and sanding characteristics. IES8422 Panel Bonders IES8422 IES8430 Hybrid Panel Bonder 2:1 Ratio Hybrid Panel Bonder 2:1 Ratio Intermix 20 Panel Bonding Adh. A heavy-bodied two-part high strength epoxy/ urethane adhesive that will bond to a wide variety of metal and plastic substrates. When used according to specific directions, Hybrid Panel Bonding Adhesive may be used in the replacement of quarter panels, door skins, roof panels, truck box sides and other outdoor body sheet metal. IES8451 Expandable Foams IES8455 IES8455 Inter-Foam 5 Flexible Foam Inter-Foam 10 Rigid Urethane Foam Inter-Foam 10 Rigid Foam A two part expandable rigid urethane foam for- mulated to fill and reinforce pillar posts and box sections. Expands up to 10 times its original volume. Also stops wind, water and dust leaks. IES1700 Specialty Cleaners IES1700 IES1750 Super Cleaning Solvent Super Cleaning Solvent Quickie 5000 Solvent A quick, safe, multi-purpose solvent. Excellent for removing silicone wax, adhesives, tar, un- dercoating, sealers, paint overspray and bugs. Safe on most fully cured paints, fabric, vinyl, glass and most plastics.Non-staining. Film free. 140 General Repair

Brake Pads & Shoes System XL® Noise Elimination Technology® Mighty System XL® brake pads with Noise Elimination Technology® utilize a combination of key construction features designed to combat Noise, Vibration and Harshness (NVH). NET® development begins with the highest grade ceramic or semi-metallic raw materials for consis- tent quality and performance. NET® pads follow OE specifications to ensure fit and function. They deliver optimum performance by using multiple chamfer designs, heat-dissipating slots and OE designed noise-reducing shims. Hardware included where applicable Positive Mold Process A positive mold press directs heat and pressure to each mold cavity separately to ensure consistent compressibility when forming the brake pad. This process is superior to traditional aftermarket methods that apply heat and pressure over multiple cavities. • Less resin required in friction formulation, so pads are less susceptible to heat fade • Friction compressibility remains consistent to ensure quiet operation • Significant reduction in harmful brake dust • Promotes longer pad life Scorching (MBP-35, 37) • Removes impurities from friction material 141 • Reduces initial break-in process • Improves initial pad “bite” General Repair

Brake Pads & Shoes System XL® Severe Duty Mighty System XL® Severe Duty brake pads are formulated to provide maximum stopping power in tough, high heat conditions, without excessive lining or rotor wear. These severe duty semi-metallic formulations are designed for ambulance, police and medium to heavy duty vehicles. (MBP-36) TecSelect® Brake Pads TecSelect®, Mighty’s Mid-Grade brake pad program, offers test proven Ceramic and Semi-Metallic friction formulations for most domestic and import vehicle applications. A combination of shims, slots and chamfers are used to provide maximum braking performance. Hardware included (MBP-31, 32, 34, 38) where applicable System XL® Brake Shoes Mighty brake shoes follow O.E. requirements, which include (MBP-50) parking brake levers and pins as required. Shoes are provided “outright” eliminating messy cores. 142 General Repair

Brake Drums & Rotors Brake Drums & Rotors Mighty System XL® Rotors and Drums are sourced from the world’s leading producers of high quality brake parts. Manufacturing facilities follow strict OE G3000/SAE J431 to ensure maximum braking performance. Mighty brake rotors and drums come ready to install “out of the box...onto the car.” Mighty System XL® Coated Rotors Mighty System XL® Painted Rotors Mighty’s brake rotors are coated with a chromium- Mighty’s painted brake rotor program offers exten- free metal finish that provides surface protection sive coverage at a value-price level. Painted surfaces against unsightly rust and corrosion caused by road provide protection against surface rust and damaging salt, humidity, and other corrosive elements. corrosion. • Engineered to meet or exceed OE specifications • Painted surfaces include the center hat and the • All surface areas are coated for maximum edge of the brake rotor protection • Meets or exceeds OE design for superior stopping • Extends brake rotor service life • Silver-grey color designed to provide OE finish power Mighty System XL® Brake Rotors Mighty System XL® Brake Drums Mighty System XL® brake rotors deliver OE per- Mighty System XL® brake drums are produced fol- formance, fit and function. This program offers lowing OE measurements to enhance fit and perfor- comprehensive vehicle coverage at a competitive mance. Mighty brake drums are manufactured using price. G3000 qualified materials to promote better braking • CNC machined rotor surfaces meet OE stan- under all conditions and longer brake lining life. • CNC machined drum surfaces ensure smooth dards to reduce brake noise • Cooling fins match OE configurations to braking • Machine balanced to reduce vibration and brake maximize brake system performance • Rotors are precision measured to ensure noise • Measured to safeguard against out-of-round minimal run-out and thickness variation drum surface General Repair (MBP-6) Drums (MBP-39) Rotors 143

Calipers/Hub Bearings Calipers Mighty System XL® Calipers are remanufactured to deliver peak stopping performance. These “Friction- Ready” calipers include the necessary brake hardware and brackets for installation, while providing flexibility to select the best Mighty brake friction for the vehicle. Key Features: • Caliper cores are disassembled, cleaned and inspected for cracks, wear or any other damage • Re-assembled with SAE-specified rubber seals and bushings • Brake hose inlet sealing surface is reconditioned to ensure a proper seal • Units include new copper sealing washers, brake hardware and mounting brackets where applicable (MBP-62) Wheel Bearings and Seals Ball Bearings Hub Bearing Assembly Ball bearings are designed for applications requiring Mighty hub bearing assemblies, or Generation 3 low friction resistance, high speed capabilities and low bearings, combine a sealed wheel bearing with other maintenance. Primarily designed for use on rear axle components to create a complete hub bearing unit. applications Where applicable, hub bearing assemblies will include electronic sensors for ABS and traction control. Grease Seals • Heat treated splines to minimize wear and poten- Grease seals perform two important functions in a wheel tial slippage bearing assembly. They protect the bearing by keeping • 100% tested electronics the lubricant in while blocking contaminents out. Worn • Cold forged wheel studs for added strength seals allow bearing lubricant to leak, increasing bearing • Pre-lubricated with an integral seal for mainte- wear nance-free service Tapered Roller Bearings Tapered bearings consist of two components, the bearing and cage assembly, and the bearing race. These bearings install into a separate rotor or drum hub, and ride on a spindle (MDL-15) Wheel Bearing Kit Assemblies 144 Mighty Hub Repair Kits provide the necessary compo- nents to replace axle bearings on a wide range of pas- senger cars and light truck applications. Components in these kits are manufactured to OE specifications, and include wheel bearing and hub as separate components, plus any required hardware. General Repair

Chassis Parts Mighty Supreme Chassis, Steering and Suspension Products • Control Arms • Ball Joints • Stabilizer Links • Tie Rod Ends • Idler & Pitman Arms • Strut Mounts • Coil Springs • Centre Links • Bushing Kits Designed with application-specific upgrades, Mevotech Supreme parts bring increased strength and durability to the job. Supreme parts are a great option for hard-working aftermarket vehicles with several years of drivability remaining. Whether we’re building application-specific X-Factor upgrades, supplying Labor Saver additions or providing industry-best support, we work hard to deliver what technicians need. X-Factortm Upgrades Labor Savertm Features • Sintered metal bearings - Bearings made • Bootstaller - Additional tool provided in of a durable sintered powder metal that the box that can easily install boots with- leads to a longer lasting part out damaging them • Greasable ball joints - Ball joint is ser- • Additional hardware - Application specific viceable allowing the user to continue to mounting hardware is included with the grease the ball joint, improving the service part to complete the installation life • Knurled housing - Precision engineered ridges for tighter grip between connecting components General Repair (MCA-20, 25, 30, 40) 145

Chassis Parts Control Arms Mevotech Supreme Control Arms are engineered to handle extreme loads and harsh environmental conditions. Strengthened at the neck to provide maximum load transferring stability and vibration reduction at the ball joint. X-Factor™ Upgrades: Labor Saver™ Features: • Bi-metallic patented technology • Additional hardware • Enhanced cross sections • Nylon lock nuts • Sintered metal bearings • Upgraded spherical bushing • Quad sealing system • Anti-corrosion coatings Supreme Ball Joints Mevotech Supreme Ball Joints incorporate highly durable upper and lower metal bearings that surround the ball joint stud and ball. Grease fittings to allow grease and lubrication to be injected into the central area to prolong the life of the ball joint. X-Factor™ Upgrades: Labor Saver™ Features: • Bi-metallic patented technology • Bootstaller • Enhanced cross sections • Additional hardware • Sintered metal bearings • Nylon lock nuts • Upgraded spherical bushing • Quad sealing system • Anti-corrosion coatings TTX Ball Joints Engineered in-house from the ground up to be the strongest, most durable parts in the market, TTX Parts™ deliver extreme performance. They are built for high usage vehicles, such as fleets and working trucks. Designed by engineers who analyze OE wear patterns and failure points, TTX parts feature patented technology that excels in the most demanding operating environments. X-Factor™ Upgrades: Labor Saver™ Features: • PWR-TEK™ design so parts can withstand • Bootstaller • Quick loader plate extreme loading conditions • Easy-snap locking pin • INTEGRI-BOOT™ prevents contaminents • Installation adapter from entering the boot • Patented snap-in bearing • Patented directional bearing • Patented stepped bearing 146 General Repair

Mini Fuses Maxi Fuses Fuses JCASE High Amp Fuses MIN2 Gray - 2A MIN10 Red - 10A MIN15 Blue - 15A MIN3 Violet - 3A MIN20 Yellow - 20A MAX20 Yellow - 20A JCAS20 Blue - 20A MIN25 Clear - 25A MAX30 Green - 30A JCAS30 Pink - 30A MIN4 Pink - 4A MIN30 Green - 30A MAX40 Orange - 40A JCAS40 Green - 40A MAX50 JCAS50 Red - 50A MIN5 Tan - 5A MAX60 Red - 50A JCAS60 Yellow - 60A Blue - 60A MIN7-1/2 Brown - 7.5A Low Profile Mini Fuses (MLE-45) Maxi (MLE-43) Jcas LMIN2 LMIN10 LMIN25 Micro2 & Micro3 Low Profile JCASE LMIN5 LMIN15 LMIN30 LMIN7-1/2 LMIN20 MIC207.5VP MIC307.5VP LJCA20 LJCA40 MIC2005.VP MIC2030.VP LJCA25 LJCA50 (MLE-50) Mini/Low Profile MIC2010.VP MIC3005.VP LJCA30 LJCA60 MIC2015.VP MIC3010.VP AA-101-C-FSC MIC2020.VP MIC3015.VP (MLE-50) Mini/Low Profile Fuse Selection Chart MIC2025.VP Fuse selection chart (MLE-40) Fuses ACTUAL SIZE TYpEMICRO2 ATO® MINI® MCASE® JCASE® MAXI MEGA® pAL pAL pAL pAL pAL pAL ATO A Series 0 Series 1 Series 2 Series 3 Series 4 Series 5 Fuse MICRO3 LSO AVAILABL ATO3 Violet - 3A ATO15 Blue - 15A A ® ATO20 Yellow - 20A Fuse ATO25 Clear - 25A LSO AVAILABL E INLow ATO30 Green - 30A ® profile ATO40 Orange - 40A E INMINI® E IN Low LSO AVAILABL ATO4 Pink - 4A profile ® JCASE® A Fuse Female Straight 13/16\" Bent Mini 9/16\" Bent Locking Terminal Male Male Female Male Female Terminal Terminal Terminal Terminal 30A Terminal ®® ® Fuse 80A Fuse 120A Fuse 100A 30A Black 1A 15A 30A 70A 250A 80A 80A ATO5 Tan - 5A Gray 2A 2A 30A 225A 120A Violet 3A 3A 3A 3A 50A 50A 140A 140A pink 4A 4A 20A 20A 60A 200A 30A 30A 30A Tan 5A 5A 5A 5A 25A 60A 20A 100A Brown 5A 7.5A 7.5A 7.5A 7.5A 40A 25A 70A 80A 70A 25A ATO7-1/2 Brown - 7.5A Red 7.5A 10A 10A 10A 10A LpJCASE® ONLY 30A 125A 50A 50A 50A Blue 10A 15A 15A 15A 15A 40A 50A 40A 150A 20A 100A 100A 100A Yellow 15A 20A 20A 20A 20A 60A 175A 60A 60A 60A Clear 20A 25A 25A 25A 25A 20A Green MICRO 2 ONLY 30A 30A 30A 30A 80A 40A 40A 40A 40A 30A Orange 25A 40A 30A White MICRO 2 ONLY 40A 30A MICRO 2 ONLY 120A ATO10 Red - 10A GLASS AGA AGC AGU AGW AGX AGY SFE UK 1A, 1.5A, 2A, .5A, 1A, 1.5A, 2A, 1A, 2A, 3A, 4A, 1A, 1.5A, 2A, 50A 4A, 6A, 35A, AGC, SFE20, UK AGX SFE6 2.5A, 3A, 5A, 2.5A, 3A, 4A, 5A, 5A, 10A, 15A, 2.5A, 3A, 4A, 3A, 7.5A, 50A AGU 6A, 7.5A, 10A, 6A, 7.5A, 8A, 10A, 20A, 25A, 30A, 5A, 6A, 15A, AGY, SFE30 15A, 20A, 15A, 20A, 25A, 35A, 40A, 50A, 20A, 30A 20A, 9A, 14A, 25A, 30A 30A, 35A 60A 25A, 20A, 30A 30A SFE14 AGW, SFE7.5, SFE9 AGA, SFE4 FuseSelectionChart_Final1.indd 1 6/20/13 12:10 PM (MIS-55) (MLE-40) Fuses Female Terminal Auto Link PAL Fuses Straight Male Terminal PAL020 Lt. Blue - 20A PAL130 Pink - 30A PAL030 Pink - 30A PAL160 Yellow - 60A PAL040 Green - 40A PAL180 Black - 80A PAL050 Red - 50A PAL1100 Blue - 100A PAL060 Yellow - 60A PAL1120 Gray - 120A 13/16” Bent Male Terminal 9/16” Bent Male Terminal PAL230 Pink - 30A PAL430 Pink - 30A PAL440 Green - 40A PAL240 Green - 40A PAL450 PAL480 Red - 50A PAL250 Red - 50A Mini Female Terminal PAL4100 Black - 80A Blue - 100A PAL260 Yellow - 60A PAL330 Pink - 30A PAL270 Brown - 70A PAL340 Green - 40A PAL280 Black - 80A General Repair 147

Fuse Assortments & Flashers Redbox Assortment REDBOXNGA Fuse Type Part No. ATO ATO5 - ATO40 Assortment features the exact JCAS JCAS20 - JCAS60 OE parts used for the ATO, LJCA LJCA20-LJCA60 MINI, MAXI, PAL, JCAS low pro- LMIN LMIN5 - LMIN30 file JCAS, MICRO2™, MICRO3™, MAX MAX20 - MAX80 MCASE® and the low profile MCAS020-MCAS040 MINI fuses installed in over MCASE MIC2005-MIC2025 98% of the passenger cars and MICRO2 MIC3005-MIC3010 light trucks on the road today. MICRO3 MIN5 - MIN30 Compact, portable organized PAL020 - PAL4100 carry case. MIN PAL (MIS-55) Modular Rack Systems and MRS3E 00941003Z Fleet Fuse Kit Assortments Empty The Fleet Fuse Kit includes an ATO/ The NEW MRS Modular Rack System may be locked MINI Puller, MAXI Puller and 50 fuses. together, added to and placed on the counter or wall mounted. Available in 11 different assortments designed to meet your customer’s needs. The MRS Rack System allows you to stock all the circuit protection devices now used in new vehicles, i.e. JCASE, MEGA and PALS. Size comparison chart, as well as color identification charts, on header serves as a guide to easy fuse replacement. MRS1 MRS2 MRS3 MRS4 MRS5 MRS6 ATO Mini/Maxi Glass PAL/Mega PAL/JCASE ATO/Mini Assts. Fuse Type Rating ATO 5A, 7.5A, 10A, 15A, MAXI 20A, 25A, 30A MEGA MIDI 20A, 25A, 30A, 40A, 50A MINI 150A, 250A 30A, 100A, 125A, 150A, 175A, 200A 2A, 3A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A (MIS-55) Mighty Flashers FLR536/552 2 Terminal FLR550 3 Terminal (MLE-35) Links (MLE-30) 148 General Repair