HiVis_LED Backlit Surround Signage_Spec Sheet

LED Backlit/ Surround Signage Canowindra Illuminated LED Enhanced Traffic Signs • 3M Warranty Quality Reflective Materials • Multiple Activation Radar 24/7 Pedestrian • Solar or AC Powered Options Detection Options • Day or Night Visibility • White LED’s Surrounding and Backlit • Fast - Easy Installation + Mounting Systems Available Custom Text and/or Graphic 3G/4G REMOTE BATTERY BACKUP SOLAR 3M PROGRAMMABLE POWERED REFLECTIVE HIVE02468 ©Hi-VisGroup 2020. Port Macquarie APPROVED SIGN MANUFACTURER RMS Accreditation Number: ITS-AN000039 1300 857 500 hivis.com | [email protected] | 40-42 Fitzroy Street, 1 Carrington NSW 2294

Pedestrian/Warning LED Signs - Solar / AC Powered Warning Series Model Specifications .080 Highway Grade Aluminum/ Day Stainless Fasteners Construction Night Reflective Sheeting 3M Diamond Grade Sheeting Circuitry Technology Warranty Sealed PCB Technology Solar Micro-Controller Circuitry 3M Material Warranty Specifications 24 Hour Operation 2 Year PCB/LED Technology Adjustable Times/Flash Rates (Depending on Model) 80 - 150 Watt Polycrystalline Solar Cell LED Lighting 12 - 24 Volt AC Power (Up to 240 Volts) Sizes 60 - 100 Amp HR Dry Cell Battery 8-G2 LED Lighting in Sign Perimeter Cree High Power Red LED - Max 3.5 Watts Field Replacement Grommet Mounted Lights 750 x 750mm / 600 x 600mm Specifications subject to change without notice Features • Australian Standard Compliant Static Signs • LED Life Expectancy over 100,000 Hours • White LED Lights • Multiple Mounting Hardware Options Options: • Remote Wireless Activation-Communications/ Settings • Radar Activation • Pedestrian/Motion Activation 1300 857 500 hivis.com | [email protected] | 40-42 Fitzroy Street, 2 Carrington NSW 2294

Illuminated LED Enhanced Traffic Sign 1. Sign Materials - Construction - Compliance a. Sign reflective sheeting in compliance with current 3M/Australia Standard requirements for reflectivity b. Post mounting requirements per Australian Standard/RMS guidelines c. Sign constructed of .080 to .125 aluminum with stainless/aluminum strut channel and weatherproof sealant d. Vented weatherproof casing allowing ambient air to circulate for internal components and prevent condensation and excessive heat buildup e. Serial # plate with manufacture date for informational and warranty purposes 2. Battery / AC Power a. Battery mounted within IP65 rated enclosure water/dust proof b. 60 - 80 AMP HR dry sell battery 3. Solar Panel Collector a. Solar panels to be 6/12 volt - 15/20/30 watt collector type depending on type of sign, region, LED light quantities and application uses Max Power 150 Watt 150W Operating Voltage 18.4V Operating Current 6.53A Max Voltage 22.3V Operating Temperature -40C to +85C Dimensions (inch) 1494 x 678 x 45mm Type Polycrystalline b. Solar panel bracket constructed of aluminum alloy c. Post Mountable d. Angle of panel shall be 45 deg. Special attention required to insure solar collector has good access to solar power with no obstructions for optimum operation. Panel to face North e. Tempered glass solar cell sealer/protector 1300 857 500 hivis.com | [email protected] | 40-42 Fitzroy Street, 3 Carrington NSW 2294

Illuminated LED Enhanced Traffic Sign 4. LED Lights (Light Emitting Diodes) a. Sign shall have a series of either 4 - 8 LEDs depending on sign size and configuration b. All LEDs shall be compliant to Australian Standard/RMS and match colors acceptable to each type of signal per this specification c. LED flash rate at 50 to 60 times per minute per Australian Standard/RMS requirements d. LED Type: Cree High Power – 3.5 Watts Max. e. LED light dimensions: 1/8” Cree LED inside a 1 ¼” diameter lens f. 100000 hour rated LED Life (11.415 Years) g. Hi impact acrylic water/vibration proof housing lens h. Completely resin sealed lens i. Operating voltage: 6/12 VDC / Amp Draw 80 ma j. Rubber grommet LED mounting for easy in field replacement k. Output power of LEDs approximate 60000 mcd brightness l. LEDs wired in series for simultaneous flash pattern per Australian Standard/RMS m. Wiring completely enclosed in sign casing with access for replacement 5. Circuitry / LED Lighting Control Unit a. Circuit shall have a minimum of 4 output LED light circuits for use b. Circuit shall control flash rates at 50 to 60 times per minute c. Circuit shall flash 500 milliseconds / 150 milliseconds per flash d. Available Dusk to Dawn flash mode e. Micro-Controller technology f. Operation of circuit temperatures -40c to 80c g. Circuit enclosed in weatherproof casing h. Low voltage protection program (protecting from total discharge of battery) i. All wiring connections in accordance to standard wiring protection guidelines 1300 857 500 hivis.com | [email protected] | 40-42 Fitzroy Street, 4 Carrington NSW 2294