GENC_TECHNICAL CATALOGUE

TECHNICAL CATALOGUE

CONTENTS KAYALAR KİMYA 1 APPLICATION CYCLE SUGGESTIONS 4 1. GLOSSY PRODUCT APPLICATIONS 5 1.1. Recommended Gloss Topcoat Applications for Maximum Gloss Level 5 1.2. Glossy Topcoat Applications for Fast Drying 6 1.3. Glossy Topcoat Products Recommended for Vertical Applications 7 1.4. Glossy Paint Applications for Maximum Hiding Power 7 2. MATT PRODUCT APPLICATIONS 8 2.1. Closed Pore Matt Topcoat Application 8 2.2. Open Pore Topcoat Matt Application 9 2.3. Open Pore Dry Patina Application 10 2.4. Self-Sealer/Self-Primer and Special Product Application 11 2.5. Fast Drying Matt Topcoat Application 12 2.6. High Scratch Resistant Matt Topcoats 13 2.7. Soft Touch 14 3. SURFACE PREPARATION (BARRIERS, SEALERS AND PRIMERS) 15 3.1. Cracking Problems 15 3.2. Oily (Resinous) Solid Wood and Veneer Application 16 3.3. Adhesion Problem on Melamine Surfaces 16 POLYURETHANE PRODUCT GROUP 17 SEALERS 18 VP600.77 POLYURETHANE SEALER 19 VP610.77 ULTRA TRANSPARENT POLYURETHANE SEALER 20 VP850.77 POLYURETHANE SEALER 21 VP380.77 POLYURETHANE SEALER 22 VP350.77 POLYURETHANE SEALER 23 VP701.77 POLYURETHANE SEALER 24 VP700.77 POLYURETHANE SEALER MAXI-FILLER 25 VP910.77 POLYURETHANE SEALER FOR EXTERIOR 26 SEALERS REQUIRING SPECIAL APPLICATION 27 VP230.77 POLYURETHANE SEALER 28 VP680.77 ELECTROSTATIC POLYURETHANE SEALER 29 TOPCOAT VARNISHES 30 VP561.00 POLYURETHANE GLOSSY VARNISH 31 VP525.00 POLYURETHANE GLOSSY VARNISH 32 VP526.00 POLYURETHANE GLOSSY VARNISH 33 VP500.00 POLYURETHANE GLOSSY VARNISH 34 VP200.00 POLYURETHANE GLOSSY VARNISH 35 VP595.XX POLYURETHANE MATT SERIES VARNISH 36 VP508.XX POLYURETHANE MATT SERIES VARNISH 37 VP509.XX POLYURETHANE MATT SERIES VARNISH 38 VP500.XX POLYURETHANE MATT SERIES VARNISH 39 SPECIAL TOPCOAT VARNISHES 40 VP515.20 DRY HEAT RESISTANT MATT VARNISH 41 VP680.XX ELECTROSTATIC POLYURETHANE MATT SERIES VARNISH 42

CONTENTS PRIMERS 43 BP548.77 POLYURETHANE PRIMER 44 BP547.77 POLYURETHANE PRIMER 45 BP175.77 POLYURETHANE PRIMER 46 BP100.77 POLYURETHANE PRIMER 47 BP531.77 POLYURETHANE PRIMER 48 BP530.77 POLYURETHANE PRIMER 49 BP323.77 POLYURETHANE PRIMER 50 BP333.77 POLYURETHANE PRIMER 51 BP133.77 POLYURETHANE PRIMER 52 BP444.77 POLYURETHANE FOAM PRIMER 53 PRIMERS REQUIRING SPECIAL APPLICATION 54 BP400.77 POLYURETHANE PRIMER 55 TOPCOAT PAINTS 56 BP695.00 POLYURETHANE GLOSSY PAINT 57 BP555.00 POLYURETHANE GLOSSY PAINT 58 BP580.00 POLYURETHANE GLOSSY PAINT 59 BP500.00 POLYURETHANE GLOSSY PAINT 60 BP100.00 POLYURETHANE GLOSSY PAINT 61 BP545.XX POLYURETHANE MATT SERIES PAINT 62 BP580.XX POLYURETHANE MATT SERIES PAINT 63 BP588.XX POLYURETHANE MATT SERIES PAINT 64 BP101.XX POLYURETHANE MATT SERIES PAINT 65 BP702.50 POLYURETHANE PANEL DOOR PAINT 66 BP700.40 POLYURETHANE PANEL DOOR PAINT 67 POLYURETHANE FIRE RETARDANT PRODUCT GROUP 68 VP900.77 FIRE RETARDANT POLYURETHANE SEALER 69 VP900.25 FIRE RETARDANT POLYURETHANE MATT VARNISH 70 BP900.77 FIRE RETARDANT POLYURETHANE PRIMER PAINT 71 BP900.25 FIRE RETARDANT POLYURETHANE MATT PAINT 72 ACRYLIC PRODUCT GROUP 73 SEALERS 74 VA700.77 UV RESISTANT ACRYLIC SEALER 75 VA105.77 ACRYLIC SEALER 76 VA104.77 ACRYLIC SEALER 77 TOPCOAT VARNISHES 78 VA700.XX UV RESISTANT ACRYLIC MATT SERIES VARNISH 79 VA590.01 NATURAL VARNISH 80 VA550.00 ACRYLIC GLOSSY VARNISH 81 VA450.00 ACRYLIC GLOSSY VARNISH 82 VA510.00 ACRYLIC GLOSSY VARNISH 83 VA500.00 ACRYLIC GLOSSY VARNISH 84 VA500.XX ACRYLIC MAT SERIES VARNISH 85 VA503.XX ACRYLIC MAT SERIES VARNISH 86 POLYACRYLIC TOPCOAT VARNISHES 87 VP551.00 POLYACRYLIC GLOSSY VARNISH 88 VP460.00 POLYACRYLIC GLOSSY VARNISH 89 PRIMERS 90 BA105.77 ACRYLIC PRIMER 91

CONTENTS PAINTS 92 BA450.00 ACRYLIC GLOSSY PAINT 93 BA453.00 ACRYLIC GLOSSY PAINT 94 BA500.XX ACRYLIC MATT SERIES PAINT 95 BA200.10 ACRYLIC SELF SEALER PAINT 96 POLYESTER PRODUCT GROUP 97 SEALERS 98 VE401.77 POLYESTER SEALER 99 TOPCOAT VARNISHES 100 VE500.00 POLYESTER GLOSSY VARNISH 101 PRIMERS 102 BE510.77 POLYESTER PRIMER 103 BE401.77 POLYESTER PRIMER 104 ACID CURED PRODUCT GROUP 105 SEALERS 106 VQ100.77 ACID CURED SEALER 107 TOPCOAT VARNISHES 108 VQ100.XX ACID CURED MATT SERIES VARNISH 109 PRIMERS 110 BQ100.77 ACID CURED PRIMER 111 PAINTS 112 BQ100.30 ACID CURED MATT PAINT 113 CELLULOSIC PRODUCT GROUP 114 SEALERS 115 VN100.77 CELLULOSIC SEALER 116 VARNISHES 117 VN150.00 CELLULOSIC SELF SEALER GLOSSY VARNISH 118 VN150.XX CELLULOSIC SELF SEALER MATT SERIES VARNISH 119 VN100.00 CELLULOSIC GLOSSY VARNISH 120 VN100.XX CELLULOSIC MATT SERIES VARNISH 121 PRIMERS 122 BN100.77 CELLULOSIC PRIMER 123 BN301.77 CELLULOSIC PRIMER 124 BN350.77 CELLULOSIC PRIMER 125 PAINTS 126 BN100.00 CELLULOSIC GLOSSY PAINT 127 BN100.10 CELLULOSIC MATT PAINT 128 BN301.00 CELLULOSIC GLOSSY PAINT 129 WATER-BASED PRODUCT GROUP 130 SEALERS 131 VW716.77 WATER BASED SEALER 132

CONTENTS TOPCOAT VARNISHES 133 VW716.XX WATER BASED SELF SEALER MATT SERIES VARNISH 134 VW728.XX WATER BASED PARQUET VARNISH 135 PRIMERS 136 BW754.77 WATER BASED PRIMER 137 PAINTS 138 CW760.30 WATER BASED PAINT 139 WOOD COLORANTS PRODUCT GROUP 140 ZD820.00 GENÇCOLOR WOOD STAIN 141 ZD900.00 GENCMIX VARNISH COLORANT 142 ZD420.00 PATINA PAINT 143 BS600.00 WOODTEX SYNTHETIC WOOD COLORANT 144 VN101.00 CELLULOSIC WOOD COLORANT 145 METALLIC PASTE SYSTEM PRODUCT GROUP 146 GENÇ TINTING SYSTEM PRODUCT GROUP 150 CW760.30 WATER BASED CONVERTER MATT PAINT (TINTING) 151 CW900.15 WATER BASED CONVERTER GLASS PAINT (TINTING) 152 CP535.00 POLYURETHANE CONVERTER GLOSSY PAINT (TINTING) 153 CP558.XX POLYURETHANE CONVERTER MATT PAINT (TINTING) 154 CP585.00 POLYURETHANE CONVERTER GLOSSY PAINT (TINTING) 155 CP585.XX POLYURETHANE CONVERTER MATT PAINT (TINTING) 156 CN500.00 CELLULOSIC CONVERTER GLOSSY PAINT (TINTING) 157 CN500.15 CELLULOSIC CONVERTER MATT PAINT (TINTING) 158 PP600.00 SOLVENT BASED PASTE (TINTING) 159 PW460.00 WATER BASED PASTE (TINTING) 160 UV PRODUCT GROUP 161 UV CURABLE SYSTEMS 162 ADVANTAGES OF UV SYSTEMS 163 PAINTING PROCESS & QUALITY 164 DIFFERENCES COMPARED TO CONVENTIONAL COATINGS 165 APPLICATION METHODS 166 APPLICATION EQUIPMENTS 167 LAMPS & REFLECTORS 167 DRYING OVEN 170 SAFE USE & STORAGE OF UV CURABLE PRODUCTS 171 TYPES OF UV CURABLE COATINGS 172 WATER BASED UV 173 GENÇ UV PRODUCT RANGES 174 ROLLER APPLICATION 175 SPRAY APPLICATION 176 CURTAIN, VACUUM, BACK SIDE FURNITURE APPLICATIONS 177 GENÇ SPRAYABLE PRODUCTS WITH 100% SOLID CONTENT 178 PIGMENTED UV CURABLE PAINTS 179 PHOTOINITIATORS 180 VARIABLES OF UV CURABLE PAINTING SYSTEMS 181

CONTENTS EXAMPLES OF UV COATING SYSTEMS 182 TECHNICAL SUPPORT, APPLICATION AND SIMULATION CENTER 185 BARRIER PRODUCT GROUP 186 BL193.77.1000 MDF BARRIER WHITE 187 VL292.77.0000 WOOD BARRIER 191 VL195.77.0000 MELAMINE BARRIER (ADHESION INCREASE BARRIER) 193 VL280.77.0000 EPOXY BARRIER 194 ADDITIVES PRODUCT GROUP 195 ADDITIVES 196 SPECIAL PURPOSE PRODUCT GROUP 197 BK100.XX SERTLAKE MATT SERIES PAINT 198 VX100.00 ULTRA TRANSPARENT GLOSSY CASTING EPOXY 199 BW550.00 PEELABLE OPAQUE COATING 200 VW500.00 PEELABLE TRANSPARENT COATING 201 VW300.00 WRITE & WIPE 202 BW100.76 ACRYLIC PUTTY 205 DECORATIVE PRODUCT GROUP 206 PLATIN SYNTHETIC WOOD AND METAL PAINTS 207 BS100.77 SYNTHETIC PRIMER 208 BS100.78 SYNTHETIC ANTIRUST 209 BS200.00 SYNTHETIC GLOSSY PAINT 210 BS200.10 SYNTHETIC MATT PAINT 211 BI500.00 HAMMERTON PAINT 212 WOODTEX VARNISH PRODUCT GROUP 213 BS500.00 WOODTEX COLORED TRANSPARENT WOOD PRIMER 214 BS505.00 WOODTEX COLORED TRANSPARENT WOOD VARNISH 215 VN106.77 PARQUET SEALER 216 VS100.XX SYNTHETIC PARQUET VARNISH 217 VS102.XX SYNTHETIC YACHT VARNISH 218 DECORATIVE PRODUCT GROUP 219 BO100.00 PAINT REMOVER 220 PLATIN INDUSTRIAL RAPID PAINTS 221 BI100.77 RAPID INDUSTRIAL PAINT 222 BI100.00 RAPID INDUSTRIAL PAINT 223 THINNERS 224 SUPPLEMENTARY PRODUCTS 226 SPRAY PAINTS 227 POLISH PASTES 228 POLYESTER PUTTY 228 REPAIR PUTTY 229 MASKING TAPE 229 COLOR CHARTS 230 PICTOGRAMS USED IN CATALOGUE AND ITS DEFINITIONS 239

Kayalar Kimya Kayalar Kimya’s growth strategy is based on a mission that focuses on innovative products and services as well as having fast and flexible action taking capabilities and being open to global markets. Founded in 1976, Kayalar Kimya provides a stable and reliable production environment of total 59.000 m2 area, equipped with the state-of-the-art technology and cutting edge automation system. With its 60000 tons of capacity Kayalar Kimya is one of the Europe’s largest paint and varnish manufacturers and 79th biggest paint company in the world as listed in Coatings World, 2019. With a market share of 23% in Turkey, a range of 3000 different product range, besides its more than 4000 domestic and international customers, Kayalar Kimya improves its competitive capacity by using the globally accepted best practices and initiatives. Kayalar Kimya, which has been awarded successively with the “Stars of Export” award by the Turkish Exporters Assembly with its export performance realized in 60 countries, in December 2016, with its brand GENÇ, has been taken under the scope of TURQUALITY which is the world’s first and only state-sponsored branding program by the Ministry of Economy of Republic of Turkey.

Genç “We Enhance the Wood” Kayalar Kimya launched Genç brand soon after its corporation in 1976. The brand is one of the world’s most preffered brands in furniture paints and varnish production sector while also being the leader of Turkish market. Over 3000 High-Tech Genç branded products for both commercial and consumer use, can be applied on any wooden surface. While GENÇ is following the worldwide trends in wood coatings and the demands of furniture industry, the company has established Turkey’s first technical support, application and training center wood coating systems to design customized service solutions on buyers’ demands. With its experts, the technical support and application center, available at the company headquarters, offers simulation to buyers based on customized application parameters and processes. In December 2016, by the Ministry of Economy of the Republic of Turkey, GENÇ brand was taken under the scope of TURQUALITY which is the world’s first and only state- sponsored branding program. Also, GENÇ brand is the first and only brand, in the furniture paint and varnish sector, that is worth seeing in the Turquality program. GENÇ Product Groups • Wood Colorants • Decorative Products • GENÇ AQUA Water-Based Products • Acrylic Products • Polyurethane Products • Cellulosic Products • Polyester Products • UV System Products • Genç Tinting System • Thinners • Special Purpose Products • Auxilary Products

Kayalar Kimya R&D Center Kayalar Kimya, one of the top 500 industrial companies of Turkey that fuels national economy through investments, subsidiaries and export volume, creates new assets at R&D laboratories and assures long lasting sustainable growth. R&D Center, having 1700 m2 laboratory area and 35 professional staff, is singlehandedly one of the most important figure that made Kayalar Kimya a leading manufacturer in Europe. The center launches joint projects with several national, international universities, research institutions and scientific institutions, especially TÜBİTAK (Scientific and Technological Research Council of Turkey) and the center is capable of producing customized products that will specifically meet customer demands since it is able to produce over 100 types of resin, and this capability distinguishes the company from other players in the sector.

APPLICATION CYCLE SUGGESTIONS

APPLICATION CYCLE SUGGESTIONS 1. GLOSSY PRODUCT APPLICATIONS 1.1. Recommended Gloss Topcoat Applications for Maximum Gloss Level It is recommended to apply BE401.77.1000 Polyester Primer for maximum performance in topcoat paint applications. If Polyester Primer is not applied, Polyurethane Primer should be applied that is in the GENÇ product range which has carries the glossy topcoats. Also, if poor quality MDF Barrier is to be used, it is recommended to use the BL193.77.1000 MDF Barrier to reduce the consumption, increase the cracking resistance and to prepare a smooth surface. RECOMMENDED GLOSSY PAINT APPLICATIONS FOR MAXIMUM GLOSS LEVEL Polyurethane Glossy Converter Paint BP548.77.1000 3x140 g/m2 CP535.00.XXXX 100+140 g/m2 Polyurethane Glossy White Paint BP548.77.1000 3x140 g/m2 BP695.00.1000 100+140 g/m2 Acrylic Glossy White Paint BP548.77.1000 3x140 g/m2 BA450.00.1000 100+140 g/m2 It is recommended to apply VE401.77.0000 Polyester Sealer for maximum performance in glossy varnish applications. If PE sealer is not applied, PU Sealer should be applied that is in the GENÇ product range which has carries the glossy topcoats. Depending on the coating type, the application coefficient and the amount of product applied may vary. RECOMMENDED GLOSSY VARNISH APPLICATIONS FOR MAXIMUM GLOSS LEVEL Polyurethane Glossy Varnish VP850.77.0000 3x140 g/m2 VP561.00.0000 100+140 g/m2 Polyacrylic Glossy Varnish VP850.77.0000 3x140 g/m2 VP551.00.0000 100+140 g/m2 Acrylic Glossy Varnish VP850.77.0000 3x140 g/m2 VA450.00.0000 100+140 g/m2 In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 1. GLOSSY PRODUCT APPLICATIONS 1.2. Glossy Topcoat Applications for Fast Drying It is recommended to apply VE401.77.0000 Polyester Sealer or BE401.77.1000 Polyester Primer for maximum performance in topcoat varnish or paint applications. If PE Sealer or primer is not applied, PU Sealer or primer should be applied that is in the GENÇ product range which has carries the glossy topcoats. RECOMMENDED GLOSSY PAINT APPLICATIONS FOR FAST DRYING Polyurethane Glossy Converter Paint BP548.77.1000 3x140 g/m2 CP535.00.XXXX (with HP123 hardener) 100+140 g/m2 Polyurethane Glossy White Paint BP548.77.1000 3x140 g/m2 BP555.00.1000 100+140 g/m2 RECOMMENDED GLOSSY VARNISH APPLICATIONS FOR FAST DRYING Polyurethane Glossy Varnish VP850.77.0000 3x140 g/m2 VP525.00.0000 100+140 g/m2 VA105.77.0000 VA550.00.0000 Acrylic Glossy Varnish 3x140 g/m2 100+140 g/m2 In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 1. GLOSSY TOPCOAT APPLICATIONS 1.3. Glossy Topcoat Products Recommended for Vertical Applications In vertical applications, thixotropic (flow-resistant) products that are included in the GENÇ product range should be used for maximum performance. RECOMMENDED GLOSSY PAINT APPLICATIONS FOR VERTICAL APPLICATIONS Polyurethane Glossy White Paint BP547.77.1000 3x140 g/m2 BP695.00.1000 100+140 g/m2 Polyurethane Glossy White Paint BP531.77.1000 3x140 g/m2 BP500.00.1000 100+140 g/m2 RECOMMENDED GLOSSY VARNISH APPLICATIONS FOR VERTICAL APPLICATIONS Polyurethane Glossy Varnish VP380.77.0000 3x140 g/m2 VP561.00.0000 80+110 g/m2 Polyacrylic Glossy Varnish VP380.77.0000 3x140 g/m2 VP551.00.0000 80+110 g/m2 1.4. Glossy Paint Applications for Maximum Hiding Power RECOMMENDED GLOSSY PAINT APPLICATIONS FOR MAXIMUM HIDING POWER Polyurethane Glossy Converter Paint BP548.77.1000 3x140 g/m2 CP535.00.XXXX 100+140 g/m2 Polyurethane Glossy White Paint BP548.77.1000 3x140 g/m2 BP695.00.1000 100+140 g/m2

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS Matt product applications are generally divided into 2 groups: Closed pore applications and open pore applications. Generally for matt product group, the ground is prepared with the application of the basecoat than topcoat products are applied on it. Some special products are self-sealer varnish and self-primer paint. There is no need to prepare basecoat with primer or sealer for these products and they are generally preferred to use in open pore applications. In cases where paint applications are applied on veneer as open pore (generally in wide moire wood like oak, ashen); afterwards, patina (gilding, dry patina etc.) is applied and the application is finished with matt varnish. Application titles and product combination proposals for matt products are as follows: 2.1. Closed Pore Matt Topcoat Application In order to obtain homogeneous mattness in closed pore applications, PE sealer/ primer application is recommended as well as PU primer / sealer products. CLOSED PORE APPLICATION – HOMOGENEOUS MATTNESS Polyurethane High Quality Matt Paint BP548.77.1000 or BP175.77.1000 3x140 g/m2 CP558.XX.XXXX 110 g/m2 Polyurethane Standard Quality White Matt Paint BP333.77.1000 or BP133.77.1000 3x140 g/m2 BP580.XX.1000 110 g/m2 Acrylic High Quality Matt Paint BP548.77.1000 3x140 g/m2 BA500.XX.1000 110 g/m2 Polyurethane High Quality Matt Varnish VP850.77.0000 3x140 g/m2 VP595.XX.0000 or VP508.XX.0000 110 g/m2 Polyurethane Standard Quality Matt Varnish VP380.77.0000 3x140 g/m2 VP500.XX.0000 110 g/m2 Acrylic High Quality Matt Varnish VA105.77.0000 4x140 g/m2 VA500.XX.0000 110 g/m2 Acrylic Standard Quality Matt Varnish VA105.77.0000 4x140 g/m2 VA503.XX.0000 110 g/m2 In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS 2.2. Open Pore Topcoat Matt Application Open pore applications are made so that the natural texture (moire, veins) of wood is visible and palpable. In addition, these moire can be made more visible and decorative with the patina application. OPEN PORE APPLICATION Polyurethane High Quality Matt White Paint BP548.77.1000 80 g/m2 for one coat. If required 2 coats can be applied. CP558.XX.XXXX 90 g/m2 BP333.77.1000 BP580.XX.1000 Polyurethane Standard Quality Matt White Paint BA105.77.1000 80 g/m2 for one coat. If required 2 coats can be applied. BA500.XX.1000 90 g/m2 VP610.77.0000 VP508.XX.0000 Acrylic High Quality Matt Paint VP850.77.0000 100 g/m2 for one coat. If required 2 coats can be applied. VP500.XX.0000 90 g/m2 VA104.77.0000 VA500.XX.0000 Polyurethane High Quality Matt Varnish VA104.77.0000 80 g/m2 for one coat. If required 2 coats can be applied. VA503.XX.0000 90 g/m2 Polyurethane Standard Quality Matt Varnish 80 g/m2 for one coat. If required 2 coats can be applied. 90 g/m2 Acrylic High Quality Matt Varnish 80 - 100 g/m2 for one coat. If required 2 coats can be applied. 90 g/m2 Acrylic Standard Quality Matt Varnish 80 - 100 g/m2 for one coat. If required 2 coats can be applied. 90 g/m2

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS 2.3. Open Pore Dry Patina Application Open pore applications can be finished with matt varnish in many different ways: High Quality Patina Application 1. BA105.77.1000 110 g/m2 one coat 2. VA104.77.0000 120 g/m2 3. ZD420.00.XXXX It is applied in a small amount of powder. 4. VA500.XX.0000 110 g/m2 Alternative Patina Application 1. BP333.77.1000 110 g/m2 one coat 2. BP580.XX.1000 110 g/m2 3. VA104.77.0000 120 g/m2 4. ZD420.00.XXXX It is applied in a small amount of powder. 5.VA503.XX.0000 110 g/m2 Patina Application Starting from Gençcolor Wood Stain 1. ZD820.00.XXXX It is applied in such a way that the desired color is obtained. 2. VA104.77.0000 2x100 g/m2 wet-on-wet application 3. ZD420.00.XXXX It is applied in a small amount of powder. 4. VA500.XX.0000 110 g/m2 * Application orders are shown above. In order not to fill the moires completely, application weights should be paid attention. After the ZD420 Patina application, sanding should be applied that will only remain in the moires.

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS 2.4. Self-Sealer/Self-Primer and Special Product Application The products and application forms in the GENÇ product range that do not require primer or sealer before themselves and special products are as follows: Self-Sealer/Self-Primer Product Application Sertlake Matt Paint BK100.XX.1000 120 - 140 g/m2 one coat Sertlake Matt paint is especially developed for melamine surfaces. Acrylic Self-Sealer Natural Varnish VA590.01.0000 80-100 g/m2 It can be applied one or two coats. It provides a natural wood appearance without altering the color and texture of the wood. Acrylic Self-Primer Paint BA200.XX.1000 100-120 g/m2 two coats Water Based Converter Glass Paint CW900.15.XXXX 80-100 g/m2 for one coat. If required the second coat is applied by applying with sanding. Water Based Glass Paint is applied with mixing 2% HW900 Hardener. It doesn't require primer or barrier application. In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS 2.5. Fast Drying Matt Topcoat Application The combination of matt topcoat products in the GENÇ product range, which should be given priority in applications demanding fast drying: MATT PRODUCTS FOR FAST DRYING Polyurethane High Quality Matt Paint BP530.77.1000 2x130 g/m2 CP558.XX.XXXX 110 g/m2 Polyurethane Standard Quality Matt White Paint BP133.77.1000 2x130 g/m2 BP580.XX.1000 110 g/m2 Acrylic High Quality Matt Paint BA105.77.1000 2x130 g/m2 BA500.XX.1000 110 g/m2 Acrylic High Quality Self-Primer Matt Paint BA200.10.1000 2x130 g/m2 Polyurethane High Quality Matt Varnish VP380.77.0000 2x130 g/m2 VP595.XX.0000 110 g/m2 Polyurethane Standard Quality Matt Varnish VP380.77.0000 2x130 g/m2 VP509.XX.0000 110 g/m2 Acrylic High Quality Matt Varnish VA104.77.0000 2x130 g/m2 VA500.XX.0000 110 g/m2 Acrylic Standard Quality Matt Varnish VA104.77.0000 2x130 g/m2 VA503.XX.0000 110 g/m2 In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS 2.6. High Scratch Resistant Matt Topcoats HIGH SCRATCH RESISTANT MATT PRODUCTS Polyurethane High Quality Matt Paint BP548.77.1000 2x130 g/m2 CP558.XX.XXXX 110 g/m2 BP333.77.1000 Polyurethane Standard Quality Matt Paint 2x130 g/m2 BP580.XX.1000 110 g/m2 Polyurethane High Quality Matt Varnish VP850.77.0000 2x130 g/m2 VP508.XX.0000 110 g/m2 Polyurethane Standard Quality Matt Varnish VP380.77.0000 2x130 g/m2 VP509.XX.0000 Acrylic High Quality Matt Varnish 110 g/m2 VA104.77.0000 2x130 g/m2 VA500.XX.0000 Acrylic Standard Quality Matt Varnish 110 g/m2 VA104.77.0000 2x130 g/m2 VA503.XX.0000 110 g/m2 In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 2. MATT PRODUCT APPLICATIONS 2.7. Soft Touch HIGH SOFT TOUCH MATT PRODUCTS Polyurethane High Quality Matt Paint BP548.77.1000 3x130 g/m2 CP558.XX.XXXX 110 g/m2 Polyurethane Standard Quality Matt Paint BP333.77.1000 3x130 g/m2 BP580.XX.1000 110 g/m2 Polyurethane High Quality Matt Varnish VP380.77.0000 3x130 g/m2 VP595.XX.0000 110 g/m2 Polyurethane Standard Quality Matt Varnish VP380.77.0000 3x130 g/m2 VP509.XX.0000 110 g/m2 Acrylic High Quality Matt Varnish VA105.77.0000 3x130 g/m2 VA500.XX.0000 Acrylic Standard Quality Matt Varnish 110 g/m2 VA105.77.0000 3x130 g/m2 VA503.XX.0000 110 g/m2 In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 3. SURFACE PREPARATION (BARRIERS, SEALERS AND PRIMERS) 3.1. Cracking Problems The cracking problem is usually seen on CNC treated MDF panels, joining points of the panel, edges of the panels and poor quality (low density) MDF panels. • In CNC treated panels, there is a difference in density between the engraved areas or edges and the panel surface. This leads to the absorption difference , and even when the same application amount is applied, the differences in coverage may occur. At this time, if more primer is applied in the low coverage area, the standard application amount is exceeded and a thicker film is formed. This causes cracking over time. • In general, the absorbency of MDF panel surfaces is less than absorbency of edges. Hiding power difference may occur when the same weight is applied during application. In order to eliminate hiding power differences, excess primer application causes cracking over time. • Because of the high absorbency of low density MDF panels, consumption of primer during application increases, therefore excess primer causes cracking risk. Due to the density of the panels, applying more primer than the specified amounts and repeating this application with sanding between the floors at certain intervals causes the product not to dry completely within the periods specified in the technical bulletin. Therefore, the surface of the film dry, while the innerside doesn't dry. Over time, the paint layer that is also dry innerside will narrow and this shrinkage in the surface part is seen as cracks. Sudden air temperature change is one of the reasons for cracking. It is recommended to apply the BL193.77.1000 MDF Barrier in the GENÇ product range to remove the absorbency differences, to prevent excessive amount application and thus to eliminate the cracking situations. In order to prevent cracking due to sudden air changes, the primer also must have high elasticity. (BP548.77.1000 and BP531.77.1000 etc.) The combination recommended for cracking is shown in the table below. Products Recommended Amount of Number of Coats Sanding Grit Size Application g/m2 BL193.77.1000 1 280 (rough sanding) BP531.77.1000 60 - 90 3 220 (between coats) + 400 (for topcoat) 130 - 140 BL193.77.1000 60 - 90 1 280 (rough sanding) BP548.77.1000 130 - 140 3 220 (between coats) + 400 (for topcoat) BL193.77.1000 60 - 90 1 280 (rough sanding) BP100.77.1000 130 - 140 3 220 (between coats) + 400 (for topcoat) In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

APPLICATION CYCLE SUGGESTIONS 3. SURFACE PREPARATION (BARRIERS, SEALERS AND PRIMERS) 3.2. Oily (Resinous) Solid Wood and Veneer Application VL292.77.0000 Wood Barrier is recommended for oily (resinous) solid wood and veneers (like teak, rosewood etc.). If the barrier is not applied, the adhesion problems, blurred, creasing, and rupture of the stain can be observed when arise the wood's resin over time. Besides, it is recommended to use a barrier to prevent surface problems originating from coating production. Once the barrier has been applied, sanding sealer can be applied in from 1 hour to 3 hours. If a longer period of time is anticipated, rough sanding should be done. Products Recommended Amount of Number of Coats Sanding Grit Size Application g/m2 VL292.77.0000 1 - VP850.77.0000 60 - 90 3 220 (between coats) + 400 (for topcoat) 130 - 140 VL292.77.0000 60 - 90 1- VP380.77.0000 130 - 140 3 220 (between coats) + 400 (for topcoat) In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin. The application amount may vary according to the oil ratio of the veneer or solid wood. 3.3. Adhesion Problem on Melamine Surfaces If primer or sealer are applied directly on melamine surfaces, adhesion problems may occur. For this reason, it is recommended to apply VL195.77.0000 Melamine Barrier. Once the barrier has been applied, sealer can be applied from 1 hour to 3 hours. If a longer period of time is anticipated, rough sanding should be done with 280 grit sandpaper. Products Recommended Amount of Number of Coats Sanding Grit Size Application g/m2 VL195.77.0000 1 - VP850.77.0000 60 - 90 1 220 (between coats) + 400 (for topcoat) 130 - 140 VL195.77.0000 60 - 90 1- BP548.77.0000 130 - 140 1 220 (between coats) + 400 (for topcoat) In order to obtain maximum performance from the products to be applied, it is necessary to comply with the mixing ratios and application conditions written in technical bulletin.

POLYURETHANE PRODUCT GROUP

POLYURETHANE PRODUCT GROUP DOLGU VESRENAİKLELRERS

POLYURETHANE PRODUCT GROUP VP600.77 EN 71-3 POLYURETHANE SEALER KEY INFO Transparent sealer developed FEATURES • High transparency for open pore applications. • High wetting and suitable for open pore applications Wets perfectly all the pore. Even suitable for teak and rose DRYING TIME (20˚C, 45-65% RH, 100 g/m2) veneers. Dust Free 10 - 15 min Good for fiber rising. Touch Dry 35 - 45 min Sandability 90 min - 100 min PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP600.77 100 100 Polyurethane Hardener 50 53 Polyurethane Thinner HP600 25 30 TP100 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180-220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc.). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP610.77 ULTRA TRANSPARENT POLYURETHANE SEALER FEATURES KEY INFO • H igh transparency It doesn't cause hazy apperance • Resistant to whitening caused by impacts • S uitable chemical structure for open pore applications in the grains by time. Due to its elastic structure, DRYING TIME (20˚C, 45-65% RH, 100 g/m2) it is resistant to whitening which can be caused by scratches or Dust Free 20 - 30 min impacts. Touch Dry 60 - 80 min Sandability 120 - 150 min PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP610.77 100 100 Polyurethane Hardener 50 53 Polyurethane Thinner HP600 0-10 0-10 TP100 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180-220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP850.77 EN 71-3 POLYURETHANE SEALER KEY INFO It is a high transparent sealer FEATURES which is developed to create • High transparency • Easy sanding high body surface before • High filling power topcoat application. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) It is recommended to use with HP900 PU Hardener at over Dust Free 10 - 15 min 25˚C and 55% humidity. It is recommended to wait 24 Touch Dry 15 - 20 min hours before glossy varnish topcoat applications. Sandability 45 - 60 min PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP850.77 Polyurethane Hardener 100 100 Polyurethane Thinner HP777 TP100 50 53 30 - 40 35 - 45 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180- 220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc.). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP380.77 EN 71-3 POLYURETHANE SEALER KEY INFO It is designed for applications FEATURES • High filling power where fast and mass • Too fast drying productions with high filling • Excellent sanding power and easy sanding are DRYING TIME (20˚C, 45-65% RH, 100 g/m2) required. It is advised to use under matt Dust Free 5 - 10 min topcoat applications. Touch Dry 10 - 15 min It is recommended to use with Sandability 30 - 45 min HP900 hardener when it is over 25˚C. PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP380.77 Polyurethane Hardener 100 100 Polyurethane Thinner HP777 TP100 50 53 35 - 45 40 - 50 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180-220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP350.77 POLYURETHANE SEALER FEATURES KEY INFO • Fast drying It is general use purpose • E asy sanding sealer which is designed for • High filling power applications where fast and easy sanding are required. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) It is suitable for light colored wooden surfaces. It is not Dust Free 15 - 20 min recommended to be used on dark colored wooden surfaces Touch Dry 40 - 45 min more than 120 g/m2. Sandability 60 - 90 min PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP350.77 100 100 Polyurethane Hardener 50 53 Polyurethane Thinner HP777 30 35 TP100 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180- 220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP701.77 POLYURETHANE SEALER FEATURES KEY INFO • High filling power It has been developed to create • Easy sanding • Easy of application high body surfaces in low- quality MDF and massive use DRYING TIME (20˚C, 45-65% RH, 100 g/m2) applications. It can be used Dust Free 10 min before primer and top coat varnish application. Touch Dry 20 - 25 min It is advised to apply Sandability 45 min maximum two coats for products that have smallest PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) details and mass production. Polyurethane Sealer VP701.77 It is suitable for light colored Polyurethane Hardener 100 100 wooden surfaces in multi-coat Cellulosic Thinner HP903 TN200 50 53 applications. 10 - 20 10 - 20 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180-220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc.). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 12 KG / 25 LT 2K

POLYURETHANE PRODUCT GROUP VP700.77 POLYURETHANE SEALER MAXI-FILLER FEATURES KEY INFO • Fast drying It has been developed to create • High filling power • Easy sanding high body surfaces in low- • Resistance to flow quality MDF and massive use applications. It can be used DRYING TIME (20˚C, 45-65% RH, 100 g/m2) before primer and top coat Dust Free 5 - 10 min varnish application. Touch Dry 18 min It is advised to apply maximum two coats for products that Sandability 50 min have smallest details and mass PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) production. Polyurethane Sealer VP700.77 Polyurethane Hardener 100 100 It is suitable to be used as MDF Polyurethane Thinner HP777 BARRIER to reduce surface TP100 33 35 absorption in all MDF types. Especially recommended for 33 - 50 33 - 50 chair manufacturers. APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180-220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 12 KG 2K

POLYURETHANE PRODUCT GROUP VP910.77 POLYURETHANE SEALER FOR EXTERIOR FEATURES KEY INFO • Suitable elastic film structure for exterior It is a elastic polyurethane • High filling power sealer with high physical and chemical resistance designed DRYING TIME (20˚C, 45-65% RH, 100 g/m2) for use as basecoat of exterior Dust Free 10 - 15 min wooden surfaces. It is recommended to use Touch Dry 25 - 30 min when it is not raining and humidity is below 80%. Sandability 60 - 90 min For the best result apply 2 coats and wait 18 hours before PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP910.77 applying VP960.XX. Polyurethane Hardener 100 100 Polyurethane Thinner HP920 TP550 50 50 20 - 30 20 - 30 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180- 220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc). If the surface is desired to be colored, it can be stained using VW240 Water Based Semi- Transparent Primer or BS500 Colored Transparent Wood Primer as the defined in the technical data sheet. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP SEALERS REQUIRING SPECIAL APPLICATION

POLYURETHANE PRODUCT GROUP VP230.77 POLYURETHANE SEALER FEATURES KEY INFO • Dipping application It is designed for chair • Easy sanding and furniture accessories • Good filling power production by dipping • Resistance to flow application. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) Dust Free 5 min Touch Dry 7 min Sandability 35 min PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Sealer VP230.77 Polyurethane Hardener 100 100 Polyurethane Thinner HP680 TP100 50 53 20 - 25 20 - 25 APPLICATION METHOD SURFACE PREPARATION The wooden surfaces to be applied must be clean and dry. PACKAGING 12 KG 2K

POLYURETHANE PRODUCT GROUP VP680.77 ELECTROSTATIC POLYURETHANE SEALER FEATURES KEY INFO • Suitable for electrostatic applications High quality sanding • Easy sanding sealer with thixotropic and • High filling power electrostatic features which can be used easily in vertical DRYING TIME (20˚C, 45-65% RH, 100 g/m2) applications. Dust Free 5 min Covering efficiency is Touch Dry 7 min minimum 90%. For the best result in Sandability 45 min electrostatic applications must be applied with TP680 thinner. PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Electrostatic Polyurethane VP680.77 Sealer 100 100 Polyurethane Hardener HP680 Polyurethane Thinner TP680 50 53 20 - 25 20 - 25 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180- 220 sandpaper, remove dust and other foreign materials (oil, silicone, varnish residues, etc). If the surface is desired to be colored, it can be stained using ZD820 Gençcolor Wood Stain or BS600 Woodtex Wood Colourant. For coloring the varnish, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 12 KG 2K

POLYURETHANE PRODUCT GROUP TOPCOAT VARNISHES

POLYURETHANE PRODUCT GROUP VP561.00 POLYURETHANE GLOSSY VARNISH FEATURES KEY INFO • High and permanent gloss It creates a mirror effect • Scratch and impact resistance by giving a wet look on the • High body • Excellent levelling applied surface. • Vivid appearance It is suitable for high quality DRYING TIME (20˚C, 45-65% RH, 100 g/m2) home furniture, tables and covers because of Dust Free 20 - 25 min vivid appearance and high transparency features. Touch Dry 80 - 110 min Stackable (500 kg/m2) 23 - 25 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Poliüretan Parlak Vernik VP561.00 Polyurethane Hardener 100 100 Acrylic Thinner HP161 TA500 100 102 0 - 10 0 - 12 GLOSS OPTIONS • 00 Glossy APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. It is recommended to apply only glossy varnish on the first coat and the next coat with pearlescent or 2 or more coat applications. PACKAGING 12 KG 2K

POLYURETHANE PRODUCT GROUP VP525.00 POLYURETHANE GLOSSY VARNISH FEATURES KEY INFO • Fast drying It can be polishing within 16-20 • Highly transparent and vivid appearance • Excellent levelling hours over 25˚C. • High and permanent gloss It is high gloss and fast drying • Scratch and impact resistance topcoat. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) Dust Free 20 - 30 min Touch Dry 60 - 70 min Stackable (500 kg/m2) 16 - 18 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Glossy Varnish VP525.00 100 100 Polyurethane Hardener 100 102 Acrylic Thinner HP125 0-5 0-5 TA500 GLOSS OPTIONS • 00 Glossy APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. It is recommended to apply only glossy varnish on the first coat and the next coat with pearlescent or 2 or more coat applications. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP526.00 POLYURETHANE GLOSSY VARNISH FEATURES KEY INFO • Fast drying It is especially recommended • High flow resistance (can be applied on vertical surfaces) for vertical applications which • High and permanent gloss has very fast drying and high • Scratch and impact resistance • Polished after 24 hours glossy features. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) Dust Free 20 - 30 min Touch Dry 60 - 70 min Stackable (500 kg/m2) 16 - 18 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Glossy Varnish VP526.00 Polyurethane Hardener 100 100 Polyurethane Thinner HP126 TP100 100 102 0 - 10 0 - 10 GLOSS OPTIONS • 0 0 Glossy APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. It is recommended to apply only glossy varnish on the first coat and the next coat with pearlescent or 2 or more coat applications. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP500.00 POLYURETHANE GLOSSY VARNISH FEATURES PACKAGING • High and permanent gloss 3 KG / 12 KG • High body KEY INFO DRYING TIME (20˚C, 45-65% RH, 100 g/m2) It is suitable for multi-coat and repair applications due to high Dust Free 20 - 25 min cracking resistant. Touch Dry 80 - 90 min It is suitable for application on coated and steel door Stackable (500 kg/m2) 16 - 17 h surfaces. PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Glossy Varnish VP500.00 100 100 Polyurethane Hardener 100 102 Polyurethane Thinner HP904 0-5 0-6 TP100 ALTERNATIVE HARDENERS & THINNERS (15-20°C, 55-60% RH) Hardener- HP900 : It is recommended for faster drying time. Dust free: 20 – 25 min. Touch dry: 70 – 80 min. Stackable (500 kg/m2): 16 – 17 h. Stackable (1000 kg/m2): 40 – 44 h. Thinner - TA500: Preferable for over 25°C. GLOSS OPTIONS • 0 0 Glossy APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. It is recommended to apply only glossy varnish on the first coat and the next coat with pearlescent or 2 or more coat applications. 2K

POLYURETHANE PRODUCT GROUP VP200.00 POLYURETHANE GLOSSY VARNISH FEATURES KEY INFO • High glossy It is a glossy topcoat • Excellent levelling polyurethane varnish that • High body can be used different climatic • Resistance to pinholes over 35˚C and 65% relative humidity conditions. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) Dust Free 20 - 30 min Touch Dry 90 - 100 min Stackable (500 kg/m2) 65 - 70 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Glossy Varnish VP200.00 Polyurethane Hardener 100 100 Polyurethane Thinner HP900 TP100 50 53 0 - 10 0 - 12 GLOSS OPTIONS • 0 0 Glossy APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. It is recommended to apply only glossy varnish on the first coat and the next coat with pearlescent or 2 or more coat applications. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP595.XX SCRATCH EN 71-3 RESISTANT POLYURETHANE MATT SERIES VARNISH NORMAL USING CONDITIONS FEATURES KEY INFO • Fast drying It is designed to be used in • Stackable in a short time both high quality and fast • Scratch resistance production with its ability to be • Homogeneous matt appearance • Silky touch effect stacked in 10 hours at 22-25˚C. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) It can be used for heavy -trafic Dust Free 8 - 10 min furnitures due to it’s high scratch resistance. Touch Dry 20 - 25 min Stackable (500 kg/m2) 8h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Matt Series Varnish VP595.XX 100 100 Polyurethane Hardener 50 53 Polyurethane Thinner HP159 50 55 TP100 GLOSS OPTIONS • 05 Full Matt • 15 Matt • 25 Special Matt (only this option is EN71.3 certified.) • 45 Silk Matt APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. PACKAGING 10 LT 2K

POLYURETHANE PRODUCT GROUP VP508.XX SCRATCH EN 71-3 RESISTANT POLYURETHANE MATT SERIES VARNISH NORMAL USING CONDITIONS FEATURES KEY INFO • High body It leaves a transparent, high • High transparency • Homogeneous matt appearance body and homogeneous • Silky touch effect film without disrupting the • High scratch resistance substrate’s appearance. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) It can be used for spray lines and curtain coater with its long Dust Free 8 - 10 min pot-life. Touch Dry 20 - 25 min Stackable (500 kg/m2) 10 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Matt Series Varnish VP508.XX 100 100 Polyurethane Hardener 50 53 Polyurethane Thinner HP129 40 50 TP100 GLOSS OPTIONS • 15 Matt • 25 Special Matt • 45 Silk Matt APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. PACKAGING 2.5 LT / 10 LT 2K

POLYURETHANE PRODUCT GROUP VP509.XX SCRATCH EN 71-3 RESISTANT POLYURETHANE MATT SERIES VARNISH NORMAL USING CONDITIONS FEATURES KEY INFO • Homogeneous matt appearance It is a varnish that can be used • Easy application • Fast drying on an artificial coatings. • High scratch resistance It is suitable for manufacturers DRYING TIME (20˚C, 45-65% RH, 100 g/m2) projects of office furniture, chairs, tables and doors. Dust Free 10 - 15 min Touch Dry 20 - 25 min Stackable (500 kg/m2) 8h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Matt Series Varnish VP509.XX 100 100 Polyurethane Hardener 50 53 Polyurethane Thinner HP600 50 55 TP100 GLOSS OPTIONS • 10 Matt • 20 Special Matt • 30 Medium Matt • 40 Silk Matt • 50 Silk Matt • 60 Semi - Matt APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP VP500.XX POLYURETHANE MATT SERIES VARNISH FEATURES KEY INFO • Fast drying It is suitable for multi-coat and • Homogeneous matt appearance repair applications due to high • Easy to repair cracking resistant. DRYING TIME (20˚C, 45-65% RH, 100 g/m2) It is suitable for application on coated and steel door surfaces Dust Free 15 - 20 min which is economical varnish. Touch Dry 30 - 40 min Stackable (500 kg/m2) 11 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Matt Series Varnish VP500.XX 100 100 Polyurethane Hardener 25 25 Polyurethane Thinner HP900 90 100 TP100 GLOSS OPTIONS • 05 Full Matt • 10 Matt • 20 Special Matt • 40 Silk Matt APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. PACKAGING 3 KG / 12 KG 2K

POLYURETHANE PRODUCT GROUP SPECIAL TOPCOAT VARNISHES

POLYURETHANE PRODUCT GROUP VP515.20 DRY HEAT RESISTANT MATT VARNISH FEATURES KEY INFO • Dry heat-resistant matt varnish for surfaces exposed to high Prevents hazy appearance or whitening caused by hot temperatures max 120˚C • High film body objects like • Excellent silky touch effect and levelling cup of tea or coffee. • Scratch resistance It must be applied on polyurethane base coat. DRYING TIME (20˚C, 45-65% RH, 120 g/m2) Dust Free 10 - 15 min Touch Dry 30 - 40 min Stackable min. 16 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Matt Varnish VP515.20 Polyurethane Hardener 100 100 Polyurethane Thinner HP515 TP100 50 54 25 - 40 25 - 40 GLOSS OPTIONS • 20 Special Matt APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ polyurethane sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PM901 Pearl Paste can be used to obtain required effect as shining. PACKAGING 12 KG 2K

POLYURETHANE PRODUCT GROUP VP680.XX ELECTROSTATIC POLYURETHANE MATT SERIES VARNISH FEATURES KEY INFO • Suitable for electrostatic applications High quality topcoat • High scratch resistance varnish with thixotropic and • Thixotropic electrostatic properties which • Silky touch effect can be used easily in vertical DRYING TIME (20˚C, 45-65% RH, 100 g/m2) applications. TP680 thinner used Dust Free 8 min recommended for electrostatic Touch Dry 30 min applications. Stackable min. 4 h PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Electrostatic PU Matt Series Varnish VP680.XX 100 100 Electrostatic PU Hardener 50 53 Electrostatic PU Thinner HP680 20 20 TP680 GLOSS OPTIONS • 10 Matt • 20 Special Matt • 30 Medium Matt • 40 Silk Matt • 65 Semi-Matt APPLICATION METHOD SURFACE PREPARATION The best performance is achieved to be applied on previously sanded surfaces which are precoated with GENÇ electrostatic, polyurethane, polyester or UV sanding sealer. Surface must be clean and dust free; remove all dirt (dust, wax etc.). If the topcoat is desired to be colored, ZD900 Gençmix Varnish Colorant can be used as the defined in the technical data sheet. PACKAGING 12 KG /25 LT 2K

POLYURETHANE PRODUCT GROUP PRIMERS

POLYURETHANE PRODUCT GROUP BP548.77 EN 71-3 POLYURETHANE PRIMER KEY INFO It can be used on MDF without FEATURES • High flexibility barrier coat. • High hiding power It can be preferred for glossy • Excellent sanding topcoat application especially • Excellent levelling when the base coat is not DRYING TIME (20˚C, 45-65% RH, 150 g/m²) polyester. Dust Free 15 - 20 min It is suitable to apply up to 250 gr/m2 for one coat at Touch Dry 20 - 40 min 20-23˚C (%55 RH). Sandability 60 - 90 min PRODUCT CODE BY WEIGHT (%) BY VOLUME (%) Polyurethane Primer Polyurethane Hardener BP548.77 100 140 - 150 Polyurethane Thinner HP548 40 45 TP100 5 - 10 10 - 20 APPLICATION METHOD SURFACE PREPARATION Before application, the surface must be sanded with 180-220 sandpaper, removed from dust and other foreign materials (oil, silicone, varnish residues, etc.). PACKAGING 4 KG / 15 KG COLOR OPTIONS 1000 White 2K