VENFILTER CATALOG 2017

Equipments 0 INFORMA- TIONAdvantages 1 Flow regulation sys- Diffuser grids: Per- PRE- tem control from the forated or rotational, FILTERS room painted in white (RAL 9010) G2-G4 2 PAINTINGS BOOTHSReferences 3HTBP-Without regulation system PRODUCTS CONFOR Dimensions (mm) For Filters Neck M5-F9 LxHxP (mm) inletReference A A1 A2 B B1 B2 H (mm) UxP* Stock* 305x305x66HTPB1212.2 340 270 320 340 285 320 325 305x610x66 150 1F 4HTPB1224.2 655 575 625 340 285 320 325 610x610x66 150 1SHTPB2424.2 655 575 625 655 575 625 365 1220x610x66 200 1S EPA/HEPAHTPB2448.2 1260 1180 1235 655 575 625 420 250 1S /ULPAHTBCR-With regulation system 5Reference Dimensions (mm) For Filters Neck UxP* Stock* HIGH A A1 A2 B B1 B2 H LxHxP (mm) inlet TEMPERA- (mm) 1FHTPBCR1212.2 340 270 320 340 285 320 325 305x305x66 1S TUREHTPBCR1224.2 655 575 625 340 285 320 325 305x610x66 150 1SHTPBCR2424.2 655 575 625 655 575 625 365 610x610x66 150 1S 6HTPBCR2448.2 1260 1180 1235 655 575 625 420 1220x610x66 200 250 EQUIP- MENTS 7 MOTORS AND TURBINES 8 UxP (*) Stock ADSOR-Units per box F: Manufacturer, S: Stock, SL: Limited Stock TION AND DESODO- RIZATION 9 Venfilter [email protected] 149 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 EquipmentsINFORMA- Technical Documentation TION HTBP-Without regulation system1 PRE- FILTERS G2-G42PAINTINGS BOOTHS3 150 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.comPRODUCTS Fax +34 937 862 493 CONFOR M5-F94EPA/HEPA /ULPA5 HIGHTEMPERA- TURE6 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Equipments 0 HTBCR-With regulation system INFORMA- TION 1 PRE- FILTERS G2-G4 2 PAINTINGS BOOTHS 3 PRODUCTS CONFOR M5-F9 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9Venfilter [email protected] 151 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 EquipmentsINFORMA- Diffuser and Grilles TION Fitting Elements1 Final filtration in the injection mouth or extraction of one- Dimensions PRE- way flow for Clean Rooms. FILTERS Features techniques G2-G4 Type: Diffuser grilles.2 Models: For Plastic Housings:PAINTINGS DFPAPHTPB: Perforated aluminium diffuser painted in white BOOTHS epoxy (RAL 9010). DFRHTP: Rotational diffuser painted in white epoxy (RAL3 9010) with a helical jet. For Metal Housings:PRODUCTS DFPAPHTM: Perforated steel diffuser painted in white epoxy CONFOR (RAL 9010). M5-F9 DFRHTM: Rotational diffuser painted in white epoxy (RAL 9010) with a helical jet.4 Assembly: Diffusers are mounted using screws. Perforation ratio: 40% for DFPAPHTPB / 45% for DFPAPHTMEPA/HEPA /ULPA References UxP (*) Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock5 Reference Model Dimensions LxH For Filters LxH Unit Vol. Weight UxP Stock HIGH DFPAPHTPB1224 (m3) (Kg) **TEMPERA- DFPAPHTPB2424 DFPAPHTPB 640x332x7 305X610 DFPAPHTPB2448 DFPALHTP 640x640x7 610X610 0.01 0.49 1S TURE DFPAPHTPB1212 DFPAPHTP 1243x640x7 1220X610 0.02 0.85 1S DFRHTP1212/16 DFPAPHTPB 332x332x7 305X305 0.05 1.6 1S6 DFRHTP1224/32 332x332x7 305x305 0.01 0.28 1S DFRHTP2424/32 DFRHTP 640x332x7 305X610 0.01 1S EQUIP- DFRHTP2448/64 DFRHTP 640x640x7 610X610 0.01 - 1S MENTS DFPAPHTM1212 DFRHTP 1243x640x7 1220x610 0.02 - 1S DFPAPHTM1224 DFRHTP 364x364x10 305x305 0.05 - 1S7 DFPAPHTM1818 DFPAPHTM 669x364x10 305X610 0.01 - 1F DFPAPHTM2424 DFPAPHTM 516x516x10 457X457 0.02 - 1F MOTORS DFPAPHTM2436 DFPAPHTM 669x669x10 610X610 0.03 - 1F AND DFPAPHTM2448 DFPAPHTM 974x669x10 915X610 0.05 - 1F DFRHTM1212/16 DFPAPHTM 1279x669x10 1220X610 0.07 - 1FTURBINES DFRHTM1224/32 DFPAPHTM 364x364x10 305x305 0.09 - 1F DFRHTM2020/24 DFRHTM 669x364x10 305x610 0.01 - 1S8 DFRHTM2424/32 DFRHTM 516x516x10 457x457 0.01 - 1S DFRHTM2448/64 DFRHTM 669x669x10 610x610 0.02 - 1S ADSOR- DFRHTM 1279x669x10 1220x610 0.02 - 1S TION AND DFRHTM 0.08 - 1S DESODO- - RIZATION Venfilter9 Tel +34 937 862 607 [email protected] INTER- Fax +34 937 862 493 www.venfilter.com NATONAL 152NORMATI- VE

Equipments 0Terminal module INFORMA- TIONFitting Elements 1Terminal module diffuser with incorporated ventilator.This module aspires the air from it's plenum or from a PRE-clean atmosphere in order to create a localised laminar FILTERSflow for clean and white rooms. G2-G4Features techniques 2Type: Diffuser Terminal module with built-in fan.Construction: Airtight welded electrogalvanised steel, white PAINTINGSepoxy paint (RAL 9010) and kiln dried. BOOTHSAir intake: Circular and at the top.Filter attachment: In the lower part, against the smooth Dimensions 3frame, one single piece and held by attachment devices thatexert a continuous and constant pressure. PRODUCTSFor filters: Air ultrafiltration to class U17. CONFORRadial fans with backward curved blades. M5-F9- External rotor engine protected by thermoforming.- Statically and dynamically balanced turbine according to 4VDI 2060 class Q 2.5.- Low noise level. EPA/HEPASingle phase 230V, 50Hz. /ULPAIntensity: 0.67 Amp.Power: 154 W. 5Speed: 2500 r.p.m.Max. & Delta press.; Pa: 460 HIGHNoise level at 1.5 m/s.: 60 dB (A) TEMPERA-ACCESSORIESPressure Gauge.- Pre. 1 (Range from 10 to 700 Pa). TUREPrefilter.Variator. 6Prefilter support. EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9Venfilter [email protected] 153 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 EquipmentsINFORMA- Advantages TION - Independent laminar flow. Reduced height.1 - Low noise level (60 dB (A)). - Installable in standard roof constructions. PRE- - Interchangeable HEPA or ULPA filter. Ultra-air filtration of up to H17 (EN 1822). FILTERS - Filtre can be removed without altering roof sealing properties. DOP and load loss connections. - Speed modifiable by module. G2-G4 References Dimensions Rated flow (m3/h/ For Filters Neck Unit Vol. UxP Stock2 LxHxP Pa) LxHxP Inlet (m3) ** ReferencePAINTINGS 680x680x300 600/125 610x610x66 200 0.13 1F BOOTHS MGGV2424.2 1290x680x300 1200/125 1220x610x66 200 (2) 0.26 1F MGGV2448.23 UxP (*) StockPRODUCTS Units per box F: Manufacturer, S: Stock, SL: Limited Stock CONFOR M5-F9 Venfilter4 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.comEPA/HEPA 154 /ULPA5 HIGHTEMPERA- TURE6 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Equipments 0MGGV2448 INFORMA- TION 1 PRE- FILTERS G2-G4 2 PAINTINGS BOOTHS 3 PRODUCTS CONFOR M5-F9 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9Venfilter [email protected] 155 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 Equipments Venfilter [email protected] Tel +34 937 862 607 www.venfilter.comINFORMA- MGGV2424 Fax +34 937 862 493 TION 1561 PRE- FILTERS G2-G42PAINTINGS BOOTHS3PRODUCTS CONFOR M5-F94EPA/HEPA /ULPA5 HIGHTEMPERA- TURE6 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Equipments 0Box INFORMA- TIONFitting Elements 1Air impulsion or extraction for High Efficiency filtration. PRE-Features techniques FILTERSType: Filtering module for Air Treatment. G2-G4Construction: Filter holder case constructed in 23 mm sandwichpanel. Thick, lacquered on the outside, aluminium profile frame 2and polyamide corner pieces and 50 mm skirting board.Optional: Stainless Steel. PAINTINGSRegistration: At the side (left or right). BOOTHSFilter attachment: Includes a BTRM frame with 4 attachmentclips. 3Installation: Installed at the ends of the air distribution duct orinserted in the ventilation circuit. PRODUCTSFor filters: Fitting of filters with flange or bridle (Multiven, Vari- CONFORpac) M5-F9Includes: Guide for high efficiency prefilter or filter.Optional: The module can include a fan, cooling/heating coils, flow 4regulation gates and a control system andHoppers to insert into a duct. EPA/HEPA /ULPAAdvantages 5- Compact High Flow Solution.- High-efficiency filtration- from F5 to F9. HIGH- Smell and comtaminant filtration (Multicarb). TEMPERA-- Filter assembly with 25mm. tab.- Record for right or left side filter maintenance. TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9Venfilter [email protected] 157 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 EquipmentsINFORMA- References UxP (*) (*) Other sizes: pleased consult. Stock TION Units per box F: Manufacturer, S: Stock, SL: Limited Stock Reference1 Model Dimensions Num. Filters Num. Filters Max. Rated UxP Stock BOX1224 HxLxP 595x595x292 PRE- BOX2424 BOX-AE 595x287x292 flow ** FILTERS BOX2436 BOX-AE 425x730x1000 1 BOX3624 BOX-AE 730x730x1000 1 (m3/h) G2-G4 BOX2448 BOX-AE 730x1035x1000 1 BOX4824 BOX-AE 1085x730x1000 2 1 2125 1F2 BOX3648 BOX-AE 730x1340x1000 2 BOX4848 BOX-AE 1340x730x1000 2 4250 1FPAINTINGS BOX6048 BOX-AE 1085x1340x1000 4 BOOTHS BOX4872 BOX-AE 1390x1340x1000 4 1 6375 1F BOX7272 BOX-AE 1650x1340x1000 63 BOX-AE 1390x1950x1000 9 1 6375 1F 1950x1950x1000PRODUCTS 8500 1F CONFOR M5-F9 8500 1F4 2 12750 1 FEPA/HEPA 17000 1 F /ULPA 2 21250 1 F5 25500 1 F HIGHTEMPERA- 35250 1 F TURE Technical Documentation6 Module configuration EQUIP- Venfilter MENTS Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com 158 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Equipments 0Boxhepa INFORMA- TIONFitting Element 1Air impulsion or extraction for Very High Efficiency PRE-filtration. FILTERSFeatures techniques G2-G4Type: Filtering module for Air Treatment. 2Construction: Filter holder case constructed in 23 mm sandwichpanel. Thick, lacquered on the outside, aluminium profile frame PAINTINGSand polyamide corner pieces and 50 mm skirting board. BOOTHSOptional: Stainless Steel.Registration: At the side (left or right) 3Filter attachment: Includes a BTRA frame with 4 fastening stays.Installation: Installed at the ends of the air distribution duct or PRODUCTSinserted in the ventilation circuit. CONFORFor filters: Fitting of Very High Efficiency or Absolute filters. (Poli- M5-F9ven and Astroven)Includes: Guide for high efficiency prefilter or filter. 4Optional: The module can include a fan, cooling/heating coils, flowregulation gates and a control system and EPA/HEPAHoppers to insert into a duct. /ULPAAdvantages 5- Compac Very High Flow Solution. HIGH- Absolute fitlration, from H10 to H14. TEMPERA-- 292 mm. filter assembly.- Record for right or left side filter maintenance. TUREReferences UxP (*) Stock 6 Units per box F: Manufacturer, S: Stock, SL: Limited Stock (*) Other sizes: pleased consult. EQUIP- Dimensions MENTSReference Model HxLxP Num. Filters Num. Filters Max.Rated Max.Rated UxP Stock 610x610x292 610x305x292 Flow (m3/h) Flow ** 7BOXHP1224 BOX-HP 450x750x1000BOXHP2424 BOX-HP 750x750x1000 1 1 H10 (m3/h) H13 1F MOTORSBOXHP2436 BOX-HP 750x1075x1000 1 1 1F ANDBOXHP3624 BOX-HP 1125x720x1000 1 1 2000 1700 1FBOXHP2448 BOX-HP 750x1380x1000 2 5000 4000 1F TURBINESBOXHP4824 BOX-HP 1430x750x1000 2 2 7000 5700 1FBOXHP3648 BOX-HP 1125x1380x1000 2 2 7000 5700 1F 8BOXHP4848 BOX-HP 1430x1380x1000 4 10000 8000 1FBOXHP6048 BOX-HP 1710x1380x1000 4 10000 8000 1F ADSOR-BOXHP4872 BOX-HP 1430x2010x1000 6 14000 11400 1F TION ANDBOXHP7272 BOX-HP 2010x2085x1000 9 20000 16000 1F DESODO- 24000 19400 1F RIZATION 30000 24000 45000 36000 9 Venfilter [email protected] 159 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 EquipmentsINFORMA- Technical Documentation TION Module configuration1 PRE- FILTERS G2-G42PAINTINGS BOOTHS3 160 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.comPRODUCTS Fax +34 937 862 493 CONFOR M5-F94EPA/HEPA /ULPA5 HIGHTEMPERA- TURE6 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Equipments 0Boxcarb INFORMA- TIONFitting Elements 1Air impulsion or extraction for active carbon cartridges. PRE- FILTERS G2-G4Features techniques 2Type: Filtering module for Air Treatment with Odours and Gases. PAINTINGSConstruction: Filter holder case constructed in 23 mm sandwich BOOTHSpanel. Thick, lacquered on the outside, aluminium profile frameand polyamide corner pieces and 50 mm skirting board. 3Registration: At the side (left or right).Filter attachment: Support with quick bayonet adjustment. PRODUCTSInstallation: Installed at the ends of the air distribution duct or CONFORinserted in the ventilation circuit. M5-F9For filters: Cylindrical cartridges of rechargeable active carbon.Includes: Guide for high efficiency filter. 4Optional: The module can include a fan, cooling/heating coils,flow regulation gates and a control system and EPA/HEPAHoppers to insert into a duct. /ULPAAdvantages 5- Solution for inserting active carbon cylindrical castridges into a conduct. HIGH- Smell and contaminant filtration. TEMPERA-- Record for right or left side filter maintenance. TUREReferences UxP (*) Stock Units per box F: Manufacturer, S: Stock, SL: Limited Stock 6Reference Model Dimensions Dimensions No. of Minium Rated flow Carbon UxP Stock EQUIP- HxLxP cartridges Cartridges contact (m3/h) (Kg) ** MENTS (mm.) Time 1F 7 (sec.) 1FBOXCC1224 BOX-CC 450x750x1000 145x85x250 8 800 23,2 1F MOTORSBOXCC2424 BOX-CC 750x750x1000 145x85x250 16 0,1 1600 46,4 ANDBOXCC2448 BOX-CC 750x1380x1000 145x85x250 32 0,1 3200 92,8 0,1 TURBINESBOXCC1224 BOX-CC 450x750x1000 145x85x450 8 0,1 1200 34,4 1 F 8BOXCC2424 BOX-CC 750x750x1000 145x85x450 16BOXCC2448 BOX-CC 750x1380x1000 145x85x450 32 0,1 2400 68,8 1 F ADSOR- TION AND 0,1 4800 137,6 1 F DESODO- RIZATIONBOXCC1224 BOX-CC 450x750x1000 145x85x650 8 0,1 1600 45,6 1 FBOXCC2424 BOX-CC 750x750x1000 145x85x650 16 9BOXCC2448 BOX-CC 750x1380x1000 145x85x650 32 0,1 3200 91,2 1 F 0,1 6400 137,6 1 F Venfilter [email protected] 161 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Equipments Venfilter [email protected] Tel +34 937 862 607 www.venfilter.comINFORMA- Technical Documentation Fax +34 937 862 493 TION Module configuration1 162 PRE- FILTERS G2-G42PAINTINGS BOOTHS3PRODUCTS CONFOR M5-F94EPA/HEPA /ULPA5 HIGHTEMPERA- TURE6 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Motors and turbines 0V60 INFORMA- TIONFilters for turbines 1Filtration of incoming, outgoing and recirculation air in Dimensions PRE-ventilation systems where a high degree of durability is Certification FILTERSrequired, such as: Gas turbines and turbocompressors. G2-G4Features techniques 2Type: Rigid bag filter.Frame: Polyurethane. PAINTINGSMedia: Progressive synthetic fibre structure. BOOTHSBags: Conical and heat-sealed, with spacers built into thepolyurethane frame, forming a rigid and aerodynamic unit. 3Average Efficency % (Em): 63%Class EN 779: M6 PRODUCTSRecommended Final Pressure Loss: 450 Pa CONFORRetention capacity (AC Fine/1000 Pa): 3000 g/unit M5-F9Breaking strength: 3000 Pa.Temperature: 90ºC 4 EPA/HEPA /ULPA 5References HIGH TEMPERA- TUREReference Dimensions Number Class Rated Inicial Filtering area ME* Class. Cons. UxP Stock 6 LxHxP bags EN779 flow PA V60-1/1 (m3/h) M2 % Energ. Energ. * * EQUIP- V60-1/2 62 MENTS Kwh/ 7 Year 592x592x600 8 M6 3400 5.56 B 790 2 F 287x592x600 4 M6 1700 2.8 4 F UxP (*) OTHER EFFICIENCIES: PLEASED CON- *ME%: Minium Efficiency to EN779:2012 MOTORSUnits per box SULT *Energy Consumption Kwh/year: Calculated according Euro- AND Stock vent Guideline 4/21 TURBINES F: Manufacturer, S: Stock, SL: Limited Stock *Energy Class: Calculated according to Eurovent 4/21. 8 ADSOR- TION AND DESODO- RIZATION 9 Venfilter [email protected] 163 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Motors and turbinesINFORMA- Multiven Turbine 292 TION Filters for turbines1 Gas turbine air inlet PRE- FILTERS Features techniques Dimensions Certification G2-G4 Type: Compact Polyhedral Rigid Bag Filter. Frame: Polystyrene.2 Filtering Element: Fibreglass paper. Separators: Thermoplastic glue beadsPAINTINGS Sealant: Bases, side and front sealed with Polyurethane. BOOTHS Joint: Bicomponent polyurethane liquid system. (Semicircular expanded polyurethane)3 Grill: Reinforcement grid as the air outlet in the model MVTG, the model MVTGSR does not include safety grid.PRODUCTS Average Efficency % (Em): 80% < Em < 90% et 95% < Em. CONFOR Class EN779: F7 and F9 M5-F9 Recommended FInal Pressure drop:600 Pa. Temperature: 80ºC continuous service.4 Humidity: 100% RHEPA/HEPA References /ULPA Reference Model Dimensions Class Rated Pressure A. Unit volume Weight ME UxP Stock5 LxHxP EN 779 flow Drop M2 (m3) (Kg) % * * MVTG242412F9 MV-TG (m3/h) 155 HIGH MVTG202412F9 MV-TG 592x592x292 F9 19 0.11 5 80 1 FTEMPERA- MVTG122412F9 MV-TG 492X592X292 4250 115 15 0.09 4 1 F MVTG242412F7 MV-TG 292X592X292 F7 3500 8.5 0.06 3 1 F TURE MVTG202412F7 MV-TG 592x592x292 2125 19 0.11 5 54 1 F MVTG122412F7 MV-TG 492x592x292 4250 15 0.09 4 1 F6 292x592x292 3500 8.5 0.06 3 1 F 2125 EQUIP- MENTS MVTGSR242412F9 MV-TG 592x592x292 F9 4250 155 19 0.11 5 80 1 F MVTGSR202412F9 MV-TG 492x592x292 F7 3500 15 0.09 41 F7 MVTGSR122412F9 MV-TG 292X592X292 2125 8.5 0.06 31 F MVTGSR242412F7 MV-TG 592x592x292 4250 0.11 5 54 1 F MOTORS MVTGSR202412F7 MV-TG 492x592x292 3500 115 19 0.09 41 F AND MVTGSR122412F7 MV-TG 292x592x292 2125 15 0.06 31 F 8.5TURBINES UxP (*) Stock *ME%: Minium Efficiency to EN779:20128 Units per box F: Manufacturer, S: Stock, SL: Limited Stock ADSOR- Venfilter [email protected] TION AND Tel +34 937 862 607 www.venfilter.com DESODO- Fax +34 937 862 493 RIZATION9 INTER- NATONALNORMATI- VE

Motors and turbines 0Multiven Turbine 440 INFORMA- TIONFilters for turbines 1Gas turbine air inlet Dimensions PRE- FILTERSFeatures techniques G2-G4Type: Compact Polyhedral Rigid Bag Filter.Frame: Polystyrene. 2Filtering Element: Fibreglass paper.Separators: Thermoplastic glue beads. PAINTINGSSealant: Bases, side and front sealed with Polyurethane. BOOTHSJoint: Bicomponent polyurethane liquid system. (Semicircularexpanded polyurethane) 3Grill: Reinforcement grid as the air outlet.Average Efficency % (Em): 95% < Em. PRODUCTSClass EN779: F9 CONFORRecommended FInal Pressure drop: F9 600 Pa. M5-F9Temperature: 80ºC continuous service.Humidity: 100% RH 4 Certification EPA/HEPA /ULPA 5References HIGH TEMPERA- TUREReference Model Dimensions Class Rated Pressure A. Unit weigth ME* Class. Energ. UxP S 6 LxHxP Energ. Cons. ** EN 779 flow drop M2 Volume (Kg) % Kwh/ Year (m3/h) (m3) 1200MVTG242417F9 MV-TG 592x592x440 F9 3400 95 32 0.16 12 78 A+ 950 EQUIP- 1 F MENTSMVTG202417F9 MV-TG 492x592x440 2800 27 0.13 9 790 1FMVTG122417F9 MV-TG 292x592x440 1700 16 0.08 6 71 FMVTG242417F8 MV-TG 592x592x440 F8 3400 79 32 0.16 12 A+ 1FMVTG202417F8 MV.TG 492x592x440 2800 27 0.13 9 1FMVTG122412F8 MV-TG 292x592x440 1700 16 0.08 6 1 F MOTORSMVTG242412F7 MV-TG 592x592x440 F7 3400 70 32 0.16 12 A+ AND 1 F TURBINESMVTG202412F7 MV-TG 492x592x440 2800 27 0.13 9 1FMVTG122412F7 MV-TG 292x592x440 1700 16 0.08 6 81 F UxP (*) Stock *ME%: Minium Efficiency to EN779:2012 ADSOR-Units per box F: Manufacturer, S: Stock, SL: Limited Stock *Energy Consumption Kwh/year: Calculated according Euro- TION AND DESODO- vent Guideline 4/21 RIZATION *Energy Class: Calculated according to Eurovent 4/21. 9 Venfilter [email protected] 165 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Motors and turbinesINFORMA- Multiven Turbine Epa TION Filters for turbines1 Gas turbine air inlet PRE- FILTERS Features techniques Dimensions G2-G4 Type: Compact Polyhedral Rigid Bag Filter. Frame: Polystyrene.2 Filtering Element: Fibreglass paper. Separators: Thermoplastic glue beadsPAINTINGS Sealant: Bases, side and front sealed with Polyurethane. BOOTHS Joint: Bicomponent polyurethane liquid system. (Semicircular expanded polyurethane)3 Grill: Reinforcement grid as the air outlet in the model MVTG, the model MVTGSR does not include safety grid.PRODUCTS MPPS Efficiency: 85%. CONFOR Class EN1822: E10 M5-F9 Recommended FInal Pressure drop: 450 Pa. Temperature: 80ºC continuous service.4 Humidity: 100% RHEPA/HEPA References /ULPA Reference Model Dimensions Class Rated Pressure A. Unit Weigth MPPS UxP S5 LxHxP EN 1822 flow drop M2 Volume (Kg) Efficiency ** (m3/h) 185 HIGH MVTG242412H10 MV-TG 592x592x292 E10 (m3) 5 % 1FTEMPERA- MVTG202412H10 MV-TG 492x592x292 E10 4250 185 4 85 1F MVTG122412H10 MV-TG 292x592x292 E10 3500 19 0.11 3 1F TURE MVTGSR242412H10 MV-TG 592x592x292 2125 200 15 0.09 5 85 1F MVTGSR202412H10 MV-TG 492x592x292 4250 8.5 0.06 4 1F6 MVTGSR122412H10 MV-TG 292x592x292 3500 19 0.11 3 85 1F MVTG24241217H10 MV-TG 592x592x440 2125 15 0.09 12 1F EQUIP- MVTG202417H10 MV-TG 492x592x440 5400 8.5 0.06 9 1F MENTS MVTG122417H10 MV-TG 292x592x440 4500 32 0.16 6 1F 2700 27 0.137 16 0.08 MOTORS UxP (*) Stock AND Units per box F: Manufacturer, S: Stock, SL: Limited StockTURBINES Venfilter8 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com ADSOR- 166 TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Motors and turbines 0Duraven INFORMA- TIONFilters for turbines 1Designed for air suction in gas turbines, compressors, PRE-centrifuges, machinery and places where there is consi- FILTERSderable vibration. G2-G4Features techniques 2Type: Compact Filter with High Efficiency aluminium separa-tors. PAINTINGSFrame: Galvanised Steel with two bridles or flanges. BOOTHSFiltering Element: Glass microfibre paper.Separators: Corrugated (Fluted) aluminium separator. Dimensions 3Sealant: Polyurethane.Clamp or flange: Galvanised Steel. PRODUCTSGrille: Grille on both sides. CONFORGravimetric Efficiency: 98% and 99.95% M5-F9Average Efficency % (Em): 60% ≤ Em < 80% and 90% ≤ Em <95% 4Class EN 779: M6 and F8Recommended Final Pressure Loss: 600 Pa. EPA/HEPATemperature: 80ºC continuous service. /ULPA 5References HIGH TEMPERA-Reference Dimensions Class Rated Flow Pressure Area M2 Unit Weight ME* Energy Cons. UxP S HxLxP EN779 (m3/H / PA) drop volume (KG) % Class Energ. * * TURE Kwh/ (m3) 8,2 Year F 6 8,2 FDU242412F8 595x595x292 F8 3400/4250 150/170 12 0.11 71 D 2550 1 EQUIP-DU242412F6 595x595x292 M6 3400/4250 110/130 12 0.11 MENTS 1 7 UxP (*) Stock *ME%: Minium Efficiency to EN779:2012Units per box F: Manufacturer, S: Stock, SL: Limited Stock *Energy Consumption Kwh/year: Calculated according Euro- MOTORS AND vent Guideline 4/21 *Energy Class: Calculated according to Eurovent 4/21. TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 Venfilter [email protected] 167 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Motors and turbinesINFORMA- Cartridges turbines TION Filters for turbines1 PRE- Air inlet of gas turbines, compressors and engines.FILTERS G2-G42 Features techniques DimensionsPAINTINGS Type: High Efficiency self-cleaning cartridge. BOOTHS Frame: Upper and lower cover. Construction: Interior and upper collectors in expanded3 galvanised steel. Filtering Element: Mixture of resin-impregnated cellulosePRODUCTS and synthetic fibres. CONFOR Sealant: Resin resistant to high temperatures and stable M5-F9 under the action of chemical agents. Joint: Circular neoprene seal with a triangular section glued4 on the top cover. Separators: Thermoplastic glue (hotmel) spacers.EPA/HEPA Average Efficency % (Em): 95% Em /ULPA Class EN 779: F9 Recommended Final Pressure Loss: 1500 Pa.5 Temperature: 80ºC continuous service. References HIGH Reference Model Diameters Average Efficiency Class Class Filtering Rated Chamber Weight UxP STEMPERA- (mm) efficiency % (MPPS E EN EN Area flow Vol. (kg) * * CTG324560-SGF9 CF-TG 779 1822 (m2) (m3/h / (m3) TURE CTG324700-SGF9 CF-TG 324x215x560 (Em) %) Pa) 71 F CTG324660-K1+ CF-TG 324x215x700 F9 8,3 1 F6 CTG445324660-K1 CF-TG (445/324x660) 96% 85% F9 17 950/190 0,07 16 1 F CTG324660-SGF9+ + (324x660) 96% F9 22 1175/190 0,09 16 1 F EQUIP- CTG445324660- CF-TG (445/324X660) 97% 48 2600/163 0.22 MENTS CF-TG + (324x660) 16 1 F SGF9 96% F9 45 2600/146 0.22 16 1 F7 CTG324660-F9+ (445/324x660) CTG445324660-F9 + (324x660) 98% F9 45 2600/137 0.22 MOTORS CTG324660-H10+ E10 45 2600/143 0.22 AND CTG445324660-H10 (445/324x660) + (324x660)TURBINES UxP (*) Stock8 Units per box F: Manufacturer, S: Stock, SL: Limited Stock ADSOR-TION AND DESODO-RIZATION9 INTER- 168 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.comNORMATI- Fax +34 937 862 493 VE

Motors and turbines Filter surface 0General Information INFORMA- TIONTG Cartridge Filters have been designed to work in extreme working condi-tions in the aspiration of gas turbines, generators and other rotary-operation 1equipment, for high performance work cycles in urban, industrial, interior,marine and coastal environments. PRE-TG cartridges are available in a wide range of sizes in order to meet the FILTERSneeds of our clients.They are available in a wide variety of filter media in order to ensure effective G2-G4performance in specific operational conditions, with 99.8% efficacy in all ca-ses, and capable of retaining particles of up to 0.5 microns. 2 PAINTINGS BOOTHSConstruction 3The filter media used for TG Cartridge production may be: PRODUCTS S: Synthetic filter media CONFOR K1: Synthetic and cellulose mixture M5-F9 F: Water-repellent micro fibreglass media SG-F9: Synthetic and fibreglass media 4 H: Hepa filter mediaThe uniform separations between filter media folds are maintained with the use of perimeter bands of melted adhe- EPA/HEPAsive that is applied heated to interior and exterior fold surfaces. This ensures constant form and distances between /ULPAthe folds, maintaining the original characteristics of the fold for long periods of time, while optimising the effectiveuse of the filter surface. The cartridges include inner and outer expanded galvanised metal covers or protections in 5order to guarantee the safety of the media, while maximizing both the filter surface and dust accumulation capacity.A thermoplastic seal is also made in order to prevent leakages between the galvanised covers at the ends of the HIGHfilter packet, resulting in a unified product. TEMPERA-These filters are assembled securely using a circular polyurethane gasket. TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9Venfilter [email protected] 169 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 Motors and turbinesINFORMA- Filter Media with respect to Turbines K1 SG-F9 F TION Filter media recommended for turbine operational a a a1 conditions a a a a a PRE- URBAN AND INDUSTRIAL AREAS: FILTERS Heavy airborne hydrocarbons, various particle sizes aa (large and small). G2-G4 INDUSTRIAL Major concentrations of large and small particles.2 MARINEPAINTINGS Coastal, humid atmospheres, moisture-laden air BOOTHS DESERT3 Arid, high dust concentrations, sandy, very fine parti- cles.PRODUCTS ARCTIC CONFOR Very cold, dry air, all humidity is transformed into M5-F9 frost and builds up on the filter.4 Cleaning Impulsion System K1 SG-F9 FEPA/HEPA Filter media recommended filter cleaning. a a /ULPA (Self-cleaning system)5 Applications HIGH Suitable for filter intake, outlet and recirculation in ventilation systems that require high safety levels with res-TEMPERA- pect to clean air, such as: • Cogeneration and power generation plants for gas turbines (air combustion, turbine ventilation, alter TURE nator ventilation and room ventilation in some cases) • Cogeneration plants for motors (air combustion, and room ventilation in some cases)6 • Compressors used for air fractionation in the production of gases (oxygen, etc.), the production of compressed air and gas pumping stations (air supply or room ventilation). EQUIP- MENTS Venfilter7 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com MOTORS 170 ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Motors and turbines 0 INFORMA- TIONEFFICACY – PARTICLE SIZE IN MICRONS 1Filter CTG324660-k1 + CTG445324660-K1 Efficacy in % terms PRE- (Cylindrical + Conical) FILTERSAerosol Test: DEHSFiltration Surface: Synthetic and cellulose mixture. G2-G4Air Flow: 0.722 m3/s. 2 Initial Efficacy: 163 Pa Efficacy after the1st dust load: 250 Pa PAINTINGS Efficacy after the 2nd dust load: 350 Pa BOOTHS Efficacy after the 3rd dust load: 450 PaFilter CTG324660-SGF9 + CTG445324660-SGF9 Efficacy in % terms Particle size (microns) 3 (Cylindrical + Conical) Particle size (microns)Aerosol Test: DEHS Particle size (microns) PRODUCTSFiltration Surface: Mixture of synthetic fibres impregnated with Particle size (microns) CONFOR resin and fibreglass M5-F9Air Flow: 0.722 m3/s. 4 Initial Efficacy: 146 Pa Efficacy after the1st dust load: 250 Pa EPA/HEPA Efficacy after the 2nd dust load: 350 Pa /ULPA Efficacy after the 3rd dust load: 450 Pa 5Filter CTG324660-F9 + CTG445324660-F9 (Cylin- Efficacy in % terms drical + Conical) HIGHAerosol Test: TEMPERA-Filtration Surface: DEHSAir Flow: TURE Fibreglass 0.722 m3/s. 6 Initial Efficacy: 137 Pa EQUIP- Efficacy after the1st dust load: 250 Pa MENTS Efficacy after the 2nd dust load: 350 Pa Efficacy after the 3rd dust load: 450 Pa 7Filter CTG324660-H10 + CTG445324660-H10 Efficacy in % terms MOTORS (Cylindrical + Conical) ANDAerosol Test: DEHSFiltration Surface: Hepa fibreglass. TURBINESAir Flow: 0.722 m3/s. Initial Efficacy: 143 Pa 8 Efficacy after the1st dust load: 250 Pa Efficacy after the 2nd dust load: 350 Pa ADSOR- Efficacy after the 3rd dust load: 450 Pa TION AND DESODO- RIZATION 9 Venfilter [email protected] 171 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Motors and turbinesINFORMA- TECHNICAL CHARACTERISTICS TION TG Filters are available in a wide range of sizes in order to meet the requirements of our clients, and may be1 supplied in the two most commonly-used formats: CYLINDRICAL AND CONICAL. PRE- The most commonly-used cartridge heights are: FILTERS • Cylindrical: 560, 600, 660 and 700 mm • Conical: 660 mm. G2-G4 Venfilter Reference: CTG324560-SGF92 External Diameter 324 mmPAINTINGS Interior Diameter BOOTHS Height: 215 mm Filtration media: 560 mm3 Mixture of synthetic fibres impregnated with resin Filtration surface and fibreglassPRODUCTS 17 m2 CONFOR M5-F9 Nominal flow: 950 m3/h.4 Efficacy 96% Ashrae Dust SpotEPA/HEPA Class according to EN 779: F9 /ULPA Venfilter Reference: CTG324660-F95 External Diameter 324 mm HIGH Interior Diameter 215 mmTEMPERA- Height: 660 mm Filtration media: fibreglass TURE Filtration surface 20 m2 1100 m3/h.6 Nominal flow: 98% Ashrae Dust Spot EQUIP- Efficacy MENTS F9 Class according to EN 779:7 Venfilter Reference: CTG324660-K1 MOTORS AND External Diameter 324 mm Interior Diameter 215 mmTURBINES Height: 660 mm Filtration media: Mixture of cellulosic and synthetic fibers impregna-8 ted with resin. Filtration surface 20 m2 ADSOR- Nominal flow: TION AND 1100 m3/h. DESODO- RIZATION Efficacy 95% Ashrae Dust Spot9 Class according to EN 779: F8 INTER- Venfilter NATONALNORMATI- Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com VE 172

Motors and turbines 0 INFORMA- TIONTECHNICAL CHARACTERISTICS 1Venfilter Reference: CTG324700-SGF9 PRE- FILTERSExternal Diameter 324 mmInterior Diameter 215 mm G2-G4Height: 700 mmFiltration media: Mixture of synthetic fibres impregnated with resin 2 and fibreglassFiltration surface 22 m2 PAINTINGSNominal flow: BOOTHS 1100 m3/h.Efficacy 96% Ashrae Dust SpotClass according to EN 779: F9 3 PRODUCTS CONFOR M5-F9Venfilter Reference: CTG324862-K1 4Installation Bayoneta EPA/HEPAExterior Diameter 324 mm /ULPAInterior Diameter 215 mmHeight: 862 mm 5Filtration media: Mixture of cellulosic and synthetic fibers impregnated with resin. HIGHFiltration surface 25 m2 TEMPERA-Nominal flow: 1360 m3/h. TUREEfficacy 95% Ashrae Dust SpotClass according to EN 779: F8Venfilter Reference: CTG404/360660-K1 6Superior Platform 404 / 324 EQUIP-Exterior Diameter 324 mm MENTSInterior Diameter 215 mmHeight: 660 mm 7Filtration media: Mixture of cellulosic and synthetic fibers impregnated with resin. MOTORSFiltration surface 20 m2 ANDNominal flow: 1100 m3/h. TURBINES 8Efficacy 95% Ashrae Dust Spot ADSOR- TION ANDClass according to EN 779: F8 DESODO- RIZATION 9 Venfilter [email protected] 173 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Motors and turbinesINFORMA- Filter References: TION CTG324660-K1 + CTG445324660-K1 (Cylindrical + Conical) Filtration Surface: Mixture of cellulose and synthetic fibres.1 Exterior Diameter 1 445 mm PRE- FILTERS Interior Diameter 1 332 mm G2-G4 Exterior Diameter 2 324 mm2 Interior Diameter 2 215 mmPAINTINGS Total Height: 1345 mm BOOTHS Filtration media: Mixture of cellulose and synthetic3 fibres impregnated with resin.PRODUCTS Filtration surface 48 m2 CONFOR M5-F9 Nominal flow: 2600 m3/h.4 Initial Pressure Difference in Pa 163EPA/HEPA Efficacy 97% Ashrae Dust Spot /ULPA Class according to EN 779: F95 Filter References: HIGH CTG324660-SGF9 + CTG445324660-SGF9 (Cylindrical + Conical) Filtra-TEMPERA- tion Surface: Mixture of synthetic fibres impregnated with resin and fibreglass TURE Exterior Diameter 1 445 mm6 Interior Diameter 1 332 mm EQUIP- MENTS Exterior Diameter 2 324 mm7 Interior Diameter 2 215 mm MOTORS Total Height: 1345 mm AND Filtration media: Mixture of synthetic fibres impreg-TURBINES Filtration surface nated with resin and fibreglass 45 m28 Nominal flow: 2600 m3/h. ADSOR- TION AND Initial Pressure Difference in Pa 146 DESODO- RIZATION Efficacy 96% Ashrae Dust Spot9 Class according to EN 779: F9 INTER- Filter References: Filter References: NATONAL CTG324660-F9 + CTG445324660-F9 (Cylindrical + Conical) Filter CTG324660-H10 + CTG445324660-H10 (Cylindrical + Conical) Filter Surfa-NORMATI- Surface: Fibreglass. ce: Hepa fibreglass. VE Exterior Diameter 1 445 mm Exterior Diameter 1 445 mm Interior Diameter 1 332 mm Interior Diameter 1 332 mm Exterior Diameter 2 324 mm Exterior Diameter 2 324 mm Interior Diameter 2 215 mm Interior Diameter 2 215 mm Total Height: 1345 mm Total Height: 1345 mm Filtration media: Fibreglass. Filtration media: Hepa fibreglass. Filtration surface 45 m2 Filtration surface 45 m2 Nominal flow: Nominal flow: Initial Pressure Difference in Pa 2600 m3/h. Initial Pressure Difference in Pa 2600 m3/h. Efficacy 137 Efficacy 143 Class according to EN 779: 98% Ashrae Dust Spot Class according to EN 779: 100% Ashrae Dust Spot F9 E10 Operational limit: - Loss of recommended final load: 1500 Pa Venfilter Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com 174

Adsortion and desodorization 0General Information INFORMA- TIONActivated charcoal, which is practically pure charcoal with an enormous porosity, is able to trap certain types ofmolecules in its walls due to a physiochemical phenomenon known as ‘adsorption’. In this process, the activated 1charcoal is the ‘adsorbent’ and the molecule retained is the ‘adsorbate’. In order to be effectively adsorbed into anactivated charcoal material, an adsorbate must have the following characteristics: PRE- (a) It must be able to fit inside the charcoal pores. FILTERS (b) The diameter of the molecule must not be less than 20% of the diameter of the majority of the activated charcoal pores. G2-G4 (c) It must have a molecular weight greater than 55. (d) Be non-polar or only slightly polar. 2Most organic compounds fulfil these requirements, which is why activated charcoal is used in gas and liquid purifi-cation processes, where the contaminants are organic molecules. PAINTINGS BOOTHSIn the case of gas purification, the possibility exists of subjecting the charcoal to a treatment that allows it to re-tain molecules that do not fulfil these characteristics (a), (b) and (c), as in the case of mineral acids (hydrochloric, 3sulphuric, nitric, phosphoric, etc.), ammonia, low-molecular weight amines, formaldehyde, isopropyl alcohol, mer-cury, etc. The treatment consists of binding a reagent to the surface of the charcoal, which then reacts with the PRODUCTSmolecule to be retained. This means that the activated charcoal provides the surface area and the retention is made CONFORby chemical adsorption or ‘chemisorption’. M5-F9Applications 4Air conditioning EPA/HEPASolvent recovery /ULPAIndustrial pollution controlVehicle canisters 5Masks Kitchen hoods HIGHCompressed air purification TEMPERA-Refrigerator deodorisationHydrogen purification (retaining hydrocarbons and organic chlorides) TUREHelium purificationAcetylene purification (retaining arsine, phosphine, stibine or benzene) 6Carbon monoxide purification (retaining toluene)Carbon dioxide purification (retaining benzene toluene from compressor oil) EQUIP- MENTSCharcoal Particle Size 7 Activated charcoal may be manufactured in three different manners, in accordance with its form: Granular MOTORS Pelletized AND Powdered In air and gas purification the first and second forms are used, in the following sizes: TURBINES 4x10 for beds with over 5 cm. thickness 12x20, 14x30 for beds with thicknesses between 2 and 5 cm (e.g. masks) 8 In the case of pellet charcoal: 3 or 4 mm in diameter, for beds with thicknesses over 5 cm. ADSOR- Less than 3 mm for with thicknesses between 2 and 5 cm. TION AND DESODO- RIZATION 9Venfilter [email protected] 175 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorizationINFORMA- Conditions that reduce adsorption capacity TION High Temperature1 High humidity levels (relative to air) Moisture in the charcoal PRE- FILTERS Adsorber Design Parameters G2-G4 Surface speed of air or gas: must be between 10 and 30 m per min. Contact time: divide the volume of the charcoal bed (litres) by the volumetric air or gas flow (litres per min.).2 Recommended rates: 0.1 second. Low concentrations PAINTINGS 2 to 7 seconds. Other cases BOOTHS Hourly renewals: 6 to 30 air changes in order to maintain a well-ventilated location.3 Index adsorption capacity of activated charcoal in gas phasePRODUCTS Of the pollutants listed, some are specific chemical compounds. Others represent a class of compounds and others CONFOR are mixtures of a variable composition. The capacity of the activated charcoal for odours varies with respect to their M5-F9 concentration, in addition to air humidity and temperature.4 A= High capacity (the charcoal retains 20% to 50% of its weight). B= Satisfactory capacity (retains 10% to 25% of its weight).EPA/HEPA C= Sufficient capacity to provide proper service under specific operational conditions, which must be analysed. /ULPA D= Low capacity. The activated charcoal does not provide a proper service under ordinary operational conditions.5 Essential oils A Borane B Diethylamine * B Rancid oils A Brea tar and tar A Diethyl ketone A HIGH Acetaldehyde * C Bromine A Dimethylaniline ATEMPERA- Amide Acetate A Ethyl bromide A Dioxane A Butyl Acetate A Hydrogen bromide * C Sulphur dioxide * C TURE Cellosolve acetate A Methyl bromide B Charcoal dioxide * D Ethyl acetate A Butadiene B Nitrogen dioxide * C6 Isopropyl acetate A Butane C Dipropyl ketone A Methyl cellosolve acetate A Butanone A Charcoal disulphide A EQUIP- Methyl acetate B Butyl cellosolve A Ethane D MENTS Propyl acetate A Butylene * C Ether B Acetylene * D Butyne * C Amyl ether A7 Acetone B Butyraldehyde * B Butyl ether A Acetic acid A Cellosolve A Dichloroethene A MOTORS Acrylic acid A Hydrogen cyanide * C Ethyl ether B AND Butyric acid A Cyclohexane A Isopropyl ether A Caprylic acid A Cyclohexanol A Methyl ether BTURBINES Carbolic acid A Cyclohexanone A Propyl ether A Formic acid * B Cyclohexene A Ethyl mercaptan A8 Lactic acid A Chorine B Ethylamine * B Nitric acid B Chlorobenzene A Ethylbenzene A ADSOR- Palmitic Acid A Chlorobutadiene A Ethylene chlorhydrin A TION AND Propionic Acid A Chloroform A Ethylene * D DESODO- Sulphuric acid A Chloro-pro-propane A Eucalyptol A RIZATION Uric acid A Chloropicrin A Phenol A Valeric acid A Butyl chloride A Fertilisers A9 Methyl acrylate A Ethyl Chloride B Fluorotrichloromethane B INTER- Venfilter NATONALNORMATI- Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com VE 176

Adsortion and desodorization 0 INFORMA- TIONEthyl acrylate A Hydrogen chloride * C Hydrogen fluoride * C 1Acrylonitrile A Methylene Chloride A Formaldehyde CAcrolein * B Methyl Chloride B Ethyl format B PRE-Adhesives A Propyl Chloride A Methyl Form B FILTERSMasking agents A Vinyl chloride B Phosgene BCamphor A Liquid fuels A Ripening fruit A G2-G4Amyl alcohol A Cleaning Compounds A Gangrene AButyl alcohol A Cresol A Car exhaust gas B 2Wood Alcohol B Crotonaldehyde A Corrosive gases BEthyl alcohol A Dean A Toxic gases B PAINTINGSIsopropyl alcohol A Deodorants A Gasoline A BOOTHSMethyl alcohol B Scrap Wastes A Burned fat APropyl alcohol A Industrial waste B Lubricating greases and oils A 3Valeric aldehyde A Disinfectants A Heptane ATar A Detergents A Heptylene A PRODUCTSAmines * C Dibromoethane A Hexane B CONFORAmmonia * C Dichlorobenzene A Hexylene * B M5-F9Anaesthetics B Dichlorodifluoromethane A Hexane * BAcetic anhydride A Dichloroethane A Hydrogen D 4Aniline A Dichloroethylene A Smoke AAnticópricos A Dichloromonofluoromethane B Incense A EPA/HEPAAroma of flowers A Dichloronitroethane A Indole A /ULPAFood scents A Dichloropropane A Irritants AAromatisers A Dichlorotetrafluroethane A Isophorone A 5Alcoholic drinks A Ethyl dichloride A Isoprene * BSoaps A Smell of melon A Waste products B HIGHSour milk A Smell of plastic A Decomposing products A TEMPERA-Calcined materials A Smell of cheese A Products used for embalming AMenthol A Animal odour B Products for radiation protection C TUREMercaptans (thiols) A Smell of tobacco smoke A Propane CMercury * A Popcorn / sweets Propyl mercaptan A 6Methane D smell A Propylene * CMethyl butyl ketone A Body odour A Tip C EQUIP-Methyl ethyl ketone A Bird odours A Propionaldehyde * B MENTSMethyl isobutyl ketone A Bath odours A Putrescine AMethyl mercaptan A Butcher’s shop smells B Kerosene A 7Methyl cellosolve A Citrus and other Organic chemicals AMethylcyclohexane A fruit A Resins A MOTORSMethylcyclohexanol A Cooking odours A Burned blood A ANDMethylcyclohexanone A Cooking odours A Hydrogen Selenide * CMethyl Chloroform B Combustion smells B Ethyl silicate A TURBINESMould B Drain odours A Smog AMonochlorobenzene A Embalming odours A Bleaching solutions * B 8Monofluorotrichloromethane A Hospital odours A Solvents BStyrene monomer A Photo development lab smell B Sweat A ADSOR-Charcoal monoxide D Liquor smell A Dimethyl sulphate A TION ANDCoal tar naphtha A Makeup smell A Hydrogen sulphide * B DESODO-Petroleum naphtha A Pet odours A Substances in putrefactionDe- B RIZATIONNaphthalene A Decayed paper odours A composing substances ANaphthalene A Smell of fish A Tetrachloroethane A 9Nicotine A Smells of paint A Tetrachlorethylene ANitro benzene A Cleaning product Carbon tetrachloride ANitro ethane A smells A Toluene ANitro-glycerine A Medicinal odours A Tolidine ANitromethane A Mixed smells A Trichloro ethane A Venfilter [email protected] 177 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorizationINFORMA- Nitropropane A Persistent odours A Trichlorethylene A TION Nonane A Stale odours A Sulphur trioxide * B Octalene A Ethylene oxide B Turpentine A1 Octane A Mesityl oxide A Urea A Odourisers A Ozone A Tarmac fumes A PRE- Garlic smell A Paradichlorobenzene A Varnish fumes A FILTERS Animal odour B B Adhesives A Fuel fumes C Smell of dead animals A Pentane B Diesel fumes A G2-G4 Smell of roast meat A Pentanone A Exhaust fumes B Onion smell A Pen ethylene * B Vinegar A2 Sour cabbage smell A Pentene * B B Xylene A Smell of decomposed food A Perchlorethylene A Iodine APAINTINGS Smell of burnt food A Perfumes and cosmetics A Iodoform A BOOTHS Odour of rubber A Pyridine A Hydrogen Iodide * B Smell of cigarette smoke A Pollen B3 VenfilterPRODUCTS CONFOR Tel +34 937 862 607 [email protected] M5-F9 Fax +34 937 862 493 www.venfilter.com 1784EPA/HEPA /ULPA5 HIGHTEMPERA- TURE6 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Adsortion and desodorization 0Frame for carbon INFORMA-replaceable cartridge TIONActive Carbon Filters 1Frame for fitting the active carbon cylinders. PRE- FILTERSFeatures techniques G2-G4Type: Mounting for the cartridges.Frame: Galvanised Steel, Stainless Steel or Plastic. 2Cartridge Fitting system: Fitting of cartridges on the quickbayonet mounting. PAINTINGS BOOTHSAdvantages Dimensions 3- Modular System. PRODUCTS CONFOR M5-F9References 4 Reference Model Dimensions No. of Unit Vol. Weight (Kg) UxP Stock EPA/HEPA LxHxP Cartridges (m3) * * /ULPABTCGV1224 BTC-GV 3BTCGV2424 BTC-GV 305x610x75 8 0.02 5 1 F 5 610x610x75 16 0.03 1 F HIGH TEMPERA- TURE UxP (*) Stock 6Units per box F: Manufacturer, S: Stock, SL: Limited Stock EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 Venfilter [email protected] 179 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorization Dimensions [email protected] www.venfilter.comINFORMA- Replaceable carbon Venfilter TION cartridges Tel +34 937 862 607 Fax +34 937 862 4931 Active Carbon Filters PRE- Replaceable carbon cartridges for air entry and exit FILTERS in ventilation systems that require imporved odour absorption, VOCs and the elimination of gases with low G2-G4 toxicity levels.2 Features techniquesPAINTINGS Type: Active carbon cylindrical cartridge. BOOTHS Carbon: Impregnated Active Carbon. Joint: Neoprene.3 Temperature: Should not exceed 45ºC Relative Humidity: Maximum 70%PRODUCTS Contact time: According to the application it can vary from 0.1 to CONFOR 0.2 seconds. M5-F9 CALCULATION OF CONTACT TIME: Ct (sec.) = volume of active car- bon (m3) / flow to be treated m3/h seconds.4 Example Frame BTCGV2424 is fitted with 16 cartridges.EPA/HEPA Cartridge CACGV145/450 contains 4.3 kg. /ULPA Volume of carbon = 16 x 4.3 = 68.8 litres or 0.0688 m3/h Flow to be treated in the installation 1,200 m3h5 CALCULATION Ct(sec.) = 0.0688 / 1200 x 3600 = 0.2 seconds HIGH The contact time is 0.2 seconds, the flows would be as follows:TEMPERA- CACGV145/250 - 50 m3/h per cartridge CACGV145/450 - 75 m3/h per cartridge TURE CACGV145/600 - 100 m3/h per cartridge6 Advantages EQUIP- - Reloadable cartridges with granulated active carbon. MENTS - Moludar system for adaptation to any installation.7 180 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

Adsortion and desodorization 0References INFORMA- TION 1 Reference Model Diameters Carbon Carbon (Kg) Minimum Rated flow(m3/h UxP Stock PRE- (mm) Thickness contact FILTERSCACGV145/250 time (s) / Pa) **CACGV145/450 G2-G4CACGV145/600 CAC-GV 145x85x250 26 mm. 2,9 0,1 100/80 1F CAC-GV 145x85x450 26 mm. 4,3 0,1 150/80 1F 2 CAC-GV 145x85x600 26 mm. 5,7 0,1 200/80 1F PAINTINGS UxP (*) Stock BOOTHS Units per box F: Manufacturer, S: Stock, SL: Limited Stock 3 PRODUCTS CONFOR M5-F9 4 EPA/HEPA /ULPA 5 HIGH TEMPERA- TURE 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 Venfilter [email protected] 181 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorizationINFORMA- Multicarb TION Active Carbon Filters1 PRE- Multi-dihedral carbon filter with half fold and activeFILTERS carbon. G2-G42 Features techniques DimensionsPAINTINGS Type: Compact Polyhedral Rigid Bag Filter for deodorisation BOOTHS associated with a High Efficiency filter. Frame: Polypropylene.3 Filtering Element: Combines active carbon pellets with synthetic fibres and microfibres with an efficiency of 95%,PRODUCTS according to EN 779, F7 and 85%, according EN779, M5. CONFOR Sealant: Polyurethane. M5-F9 Average Efficiency % (Em): 85% Class EN 779: F74 Recommended Fine Pressure Drop: 250 Pa. Temperature: Should not exceed 45ºCEPA/HEPA Retention capacity: /ULPA Organic substance toluene 952 g. Organic substance n-Butane 117 g.5 Inorganic substance SO2 350 g. Inorganic substance HO2 5000 mg. HIGH The retention capacity of the filter is determined for intakeTEMPERA- concentrations, according to standard E DIN 71460/part 2 Accumulation Capacity: (AC Fine/450 Pa) 650 g. TURE6 Advantages EQUIP- - OZONO PURIFICATION EFFICIENCY: MENTS CAFP: 90% CAF: 70%7 References UxP (*) Stock MOTORS Units per box F: Manufacturer, S: Stock, SL: Limited Stock AND Referencia Modelo Dimensiones Eficacia Clase SUP. Carbón Caudal V. Peso UxP StockTURBINES HxLxP media EN 779 Filtrante (kg) nominal Unitario (kg) ** % (Em) (m3/h / pa)8 CAFP122412F7 CAF 287x592x292 F7 (m2) 2,1 (m3) 5,3 1S CAFP202412F7 CAF 490x592x292 85% F7 3,6 1700/120 8,3 1S ADSOR- CAFP242412F7 CAF 592x592x292 85% F7 4,3 4,4 2800/120 0,05 9,2 1STION AND CAF 287x592x292 85% 7,5 2,1 3400/120 0,09 5,3 1F DESODO- CAFP122412 CAF 490x592x292 9 3,6 1600/100 0,11 8,3 1FRIZATION CAFP202412 CAF 592x592x292 4,3 4,4 2400/100 0,05 9,2 1F CAFP242412 7,5 3200/100 0,099 9 0,11 INTER- 182 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.comNORMATI- Fax +34 937 862 493 VE

Adsortion and desodorization 0Multicarb G INFORMA- TIONActive Carbon Filters 1Activated carbon filter multi dihedral PRE-Features techniques FILTERSType: Compact activated carbon filter G2-G4Frame: Polypropylene.Filtering Element: Panels activated carbon grains. 2Sealant: Polyurethane.Temperature: Should not exceed 45ºC PAINTINGS BOOTHS Dimensions 3Advantages PRODUCTS CONFOR- Odour Absorption. M5-F9References 4 Reference Model Dimensions Carbon Rated flow (m3/h Unit Vol. Weight UxP* Stock* EPA/HEPA HxLxP (Kg) / Pa) (m3) (Kg) /ULPACAFG122412 CAFG 1 FCAFG202412 CAFG 287x592x292 8 1700/70 0,05 13 1 F 5CAFG242412 CAFG 490x592x292 12 2800/70 0,09 16 1 F 592x592x292 16 3400/70 0,11 21 HIGH TEMPERA- TURE UxP (*) Stock 6Units per box F: Manufacturer, S: Stock, SL: Limited Stock EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9 Venfilter [email protected] 183 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 Adsortion and desodorizationINFORMA- Policarb TION Active Carbon Filters1 Poly-dihedral active carbon filter with a galvanised flat PRE- box with panels of granulated active carbon. FILTERS Features techniques Dimensions G2-G4 Type: Compact activated carbon filter.2 Frame: Galvanised Steel. Filtering Element: Active carbon dihedral panels.PAINTINGS Sealant: Polyurethane. BOOTHS Temperature: Should not exceed 45ºC.3 AdvantagesPRODUCTS - Odour absorption. CONFOR - Special application: radioactive ions. M5-F9 References Modelo Dimensiones Carbón Caudal V. Unitario Peso UxP Stock4 HxLxP (Kg) nominal (m3) (Kg) ** Referencia CAF (m3/h / pa)EPA/HEPA CAF 290x595x292 10 0.05 18 1F /ULPA CAF112312 CAF-ISO 595x595x292 20 1700/60 0.11 24 1F CAF232312 CAF-ISO 595x595x292 20 2800/60 0,11 30 1F5 CAFISO232312 290x595x292 10 3400/80 0,05 18 1F CAFISO112312 1700/80 HIGHTEMPERA- UxP (*) Stock (*) other sizes: pleased consult. Units per box F: Manufacturer, S: Stock, SL: Limited Stock TURE 184 Venfilter [email protected] Tel +34 937 862 607 www.venfilter.com Fax +34 937 862 493 EQUIP- MENTS7 MOTORS ANDTURBINES8 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

International normative 0International INFORMA-normative TIONEN 13799 Normative 1Ventilation in non-residential Buildings. Minimum filter classes recommended per filter section as PRE-per the EN 779 Norm FILTERS G2-G4 2 PAINTINGS BOOTHS 3 Indoor air quality PRODUCTS CONFOROutdoor air quality M5-F9 IDA 1 (high) IDA 2 (medium) IDA 3 (moderate) IDA 4 (low) 4ODA 1 (pure air) F9 F8 F7 F5 EPA/HEPA F7 + F9 F6 + F8 F5 + F7 F5 + F6 /ULPAODA2 (dust) F7 + GF + F9* F6 + GF + F9* F5 + F7 F5 + F6 5ODA 3 (very high concentration of dust orgases) HIGH TEMPERA- TURE* GF = Gas filter (carbon filter) , and/or chemical filter 6 EQUIP- MENTS 7 MOTORS AND TURBINES 8 ADSOR- TION AND DESODO- RIZATION 9Venfilter [email protected] 185 INTER-Tel +34 937 862 607 www.venfilter.com NATONALFax +34 937 862 493 NORMATI- VE

0 International normativeINFORMA- EN 13053 If bag filters are used then the filtration zone must be TION Normative at least 10 m² per 1 m² of the equipment transversal section. The joints used must be of a closed cell type,1 Air treatment ventilation. Filters installed in air treat- they must not absorb humidity and they must not form ment units. a nutritive substrate for micro-organisms. Permanent PRE- The first filtration stage must be placed on the air inlet fixing for the sealing must be guaranteed (for example, FILTERS side, as near as possible to the opening for the outdoor operation from the dirty air side). Filtration sections air inlet, so as to keep the air treatment elements as from an inside height of 1,6 m must be set up with an G2-G4 clean as possible. Additional pre-filters G1 to G4 are inspection window (with a minimum interior diameter authorised. The second filtration stage is placed on the of 150 mm) and light inside.2 outlet side at the start of the air supply duct to keep it In the fan section, for the purposes of setting the pres- clean. sure drop value in the filter on designing the air flow,PAINTINGS When just one filtration stage is used for the supply this must be the average of the initial and final drops BOOTHS system, the minimum that must be installed is a class for clean and dust filled filters respectively. F7 filter. Note 1 : The volumetric flow variation of air due to dust3 In the case of using a two filtration stages, the air su- accumulation must be indicated in the technical spe- pply fan must be placed between the first and second cifications. If the specific tolerances for an applicationPRODUCTS filtration stages. With the aim of preventing the deve- are not mentioned, <>10% is acceptable based on the CONFOR lopment of microbes in the second stage air filters or average pressure drop. M5-F9 in a superior stage, the relative humidity in the filter The pressure drop in a filter section that is filled with zone must be limited to 90%; temperatures below the solid particles must not exceed the values given in4 dew point temperature must always be avoided. The air table 9. Lower pressure drops can also be specified filters must not be placed immediately after refrige- when appropriate.EPA/HEPA ration batteries with dehumidification or after humidi- The filters installed in air treatment units used for hu- /ULPA fiers (exception –steam humidifiers). man occupation must be tested and classified in accor- dance with the EN 779 Norm.5 Maximum final pressure drop for filters HIGHTEMPERA- Class of filter Final pressure drop G1 - G4 150 Pa TURE M5 - F7 200 Pa F8 - F9 300Pa6 Note 2 : the final pressure drops indicated in the table for energy saving reasons are typical maximum values for EQUIP- working air treatment units and lower than those used in the EN 779 Norm for classification purposes, and the per- MENTS formances obtained in the trials in accordance with the EN 779 Norm are not necessarily fulfilled with these lower pressure drops.7 The following data must be shown in a clearly visible way (with a label) in the filter section: class of filter, type of fil- tering media, final pressure drop. On changing the filter the user must verify and update this information. MOTORS AND VenfilterTURBINES Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com8 186 ADSOR- TION AND DESODO- RIZATION9 INTER- NATONALNORMATI- VE

International normative 0Clean rooms and controlled annexed INFORMA-premises (US.FED.STD.209E) TION 1 PRE- FILTERS G2-G4Clas name Class limits 2 0,1 μm 0,2 μm 0,3 μm 0,5 μm 0,5 μm PAINTINGS BOOTHSS1 English mᵌ ftᵌ mᵌ ftᵌ mᵌ ftᵌ mᵌ ftᵌ mᵌ ftᵌM1 1 350 9,91 75,5 21,4 30,9 0,875 10 0,288 3M 1,5 10 1240 335 265 7,5 106 3 35,3 1 247 7M2 100 3500 99,1 757 21,4 309 8,75 100 2,83 618 17,5 PRODUCTSM 2,5 12499 360 2650 75 1060 30 353 10 2470 70 CONFORM3 35000 991 7570 214 3090 87,5 1000 28,3 6180 175 M5-F9M 3,5 26500 750 10600 300 3530 100 24700 700M4 75700 2140 30900 875 10000 283 61800 1750 4M 4,5 35300 1000M5 1000 100000 2830 EPA/HEPAM 5,5 353000 100000 /ULPAM6 10000 1000000 28300M 6,5 3530000 100000 5M7 100000 10000000 283000EN ISO 14644 Norm HIGH TEMPERA- TUREClasses by type of air particle cleaning for clean rooms and protected zones. 6 Classification Maximum admissible concentration (particles per m3 of air) for particle dimensions equal or superior to: EQUIP- Number MENTS 0,1 0,2 0,3 0,5 1 5ISO CD 14644.1 10 2 7 (1996) 100 24 10 4 8 29 1000 237 102 35 83 293 MOTORS ISO 1 10000 2370 1020 352 832 2930 AND ISO 2 100000 23700 10200 3520 8320 29300 ISO 3 1000000 237000 102000 35200 83200 293000 TURBINES ISO 4 352000 832000 ISO 5 3520000 8320000 8 ISO 6 35200000 ISO 7 ADSOR- ISO 8 TION AND ISO 9 DESODO- RIZATION 9 Venfilter [email protected] 187 INTER- Tel +34 937 862 607 www.venfilter.com NATONAL Fax +34 937 862 493 NORMATI- VE

0 International normativeINFORMA- Equivalence of Standards for Controlled TION Rooms1 Equivalence of international classification standards PRE- No. of particles US Fed. Std 209E 1992 EN ISO 14644-1 France AFNOR European Union No. of particles FILTERS >0,5 µm/m³ 1996 NF X 44.101 1981 Pharmaceutical > 0,1 µm/m³ (aprox.) Industry Guide (approx.) G2-G4 ISO 1 1 BPF 1989 102 4 35 10 ISO 2 100PAINTINGS 35 350 BOOTHS 100 M1 1 ISO 3 1 000 353 M 1.5 10 3 5003 1 000 M2 100 ISO 4 10 000 3 530 M 2.5 1 000 35 000PRODUCTS 10 000 M3 10 000 ISO 5 4 000 A and B 100 000 CONFOR 35 300 M 3.5 100 000 350 000 M5-F9 100 000 M4 ISO 6 1 000 000 353 000 M 4.54 1 000 000 M5 ISO 7 400 000 C 3 530 000 M 5.5EPA/HEPA 10 000 000 M6 ISO 8 4 000 000 D /ULPA 35 000 000 M 6.5 M75 ISO 9 HIGHTEMPERA- BPF 1989 - Pharmaceutical Industry Guide TURE CLEAN ROOMS6 Classification of the different air qualities required to manufacture sterile products: EQUIP- MENTS Maximum Nº of particles per m3 of air, with a dimension equal or superior to Max. Nº of microor- ganisms per m3 of7 0.5 µm 5 µm 0.5 µm 5 µm air (in activity) MOTORS In non-activity (b) In activity AND A 3500 0 3500 0 <1TURBINES B 3500 0 350000 2000 108 C 350000 2000 3500000 20000 100 ADSOR- TION AND D 3500000 20000 not defined (c) not defined (c) 200 DESODO- RIZATION Venfilter9 Tel +34 937 862 607 [email protected] Fax +34 937 862 493 www.venfilter.com INTER- 188 NATONALNORMATI- VE

Edition: OCTOBER 2017