HD Threaded Feet Assembly Guide

HD THREADED FOOT - FEET ASSEMBLY Step One: Reference previous assembly guide to build entire frame. Ensure HD Threaded Corner Keys are installed on the extrusion that has two holes for Threaded Foot assembly. Step Two: Turn the feet so that the countersunk side is facing away from the frame. Align the frame and a foot, screwing the HD Threaded Bolt through the foot, outer hole of the extrusion and Threaded HD Corner Key. Step Three: Cross-Section: Install the Bolt by sliding it Components: through the inner hole. Once the Bolt is through the frame, slide a Washer and Lock Washer onto it. Secure the foot by screwing on a Wing Nut to the Bolt. Repeat steps 2-3 for the second foot. Lock Washer Aluminum HD Foot-Threaded Bolt Washer Wing Nut 5/32 Allen Wrench Corner Key #2116 #2006 6945 Northpark Blvd, Suite A - Charlotte, NC 28216 | 704.579.5800 | www.SEGSYSTEMS.com