Architecture Company's Flyer Design

Naturetech® Weatherboard Cladding. At one with nature 1

Naturetech® Weatherboard Cladding 2

◦ Unlimited colours and wood finishes ◦ Lightweight robust extrusions ◦ Limited combustibility Euroclass A2 ◦ Easy to assemble and install ◦ Very low maintenance ◦ Made in the UK Contents Nuturetech® overview 4 Nuturetech® planks and accessories 6 Typical details (horizontal) 8 Typical details (vertical) 10 Nuturetech® finishes 12 Installation and maintenance 14 3

4

Overview buildings over 18 metres high. For fire safety the insulation, breather membrane and fixing sections Description must also comply. Enhanced fire resistance can be achieved by using Fireshield intumescent breather VulcaLap® aluminium rainscreen comprising membrane shown on page 7. patented aluminium planks with unique plank end jointing, concealed sliding clips and trims to suit Recyclability the application. The planks are extruded to provide robust and accurate installations. Aluminium is highly recyclable. Recycling scrap aluminium requires only 5% of the energy used to Composition and manufacture make new aluminium from the raw ore. More than 90% of the aluminum in building and automotive VulcaLap® is extruded aluminium 6063T6, powder parts is recycled at the end of use, and an coated to any matt RAL, BS or special colour, estimated 85% of the aluminium used in buildings anodised or wood finish. All finishes require today comes from recycled material with no loss regular cleaning; see our maintenance of performance. recommendations on page 9. Projects Dimensions and styles A selection of VulcaLap® projects can be viewed VulcaLap® plank is 14mm overall thickness, 150mm on the website VulcaLap® gallery showing the wide coverage, in T&G or Shiplap profile. Supplied system’s diverse applications, from exclusive in standard 3, 4 or 5m length, special order up to quality homes to large commercial properties. 6.2m. Bespoke styles can be produced subject to Contractors and Installers are encouraged where volume. possible to submit good quality pictures of finished projects, and we will add these to the Installation gallery, courtesy of the Contractor. If you would like to become a registered VulcaLap® installer, VulcaLap® can be cut with fine-toothed please enter your details on the Contact page. metalworking tool or machinery and is fixed to metal or timber battening. All plank cuts are NBS spec hidden. Robust extrusion allows the installer to ‘solo-fix’ planks up to 5m long. Purpose-designed VulcaLap® aluminium rainscreen made from starter cill, corners and trims and fixing clips must extruded aluminium 6063T6, anodised or powder be used. Refer to the drawings and details on coated to any matt RAL colour or Wood finishes. pages 10-11 of this brochure or visit VulcaLap® Purpose-designed starter or vented cill, corner downloads for animations and other details. You sections and trims and fixing clips must be used. can also request CAD fixing details via the 150mm plank coverage, in T&G or Shiplap profile, website product page. supplied in standard 3, 4 or 5m length, special order up to 6.2m. All plank cuts to be hidden by Warranties and life expectancy trims; staggered/random jointing. Refer to Vulcan drawings and installation details before Warranties are available only on a project by submitting tender: VulcaLap® downloads. project basis up to 10 years, subject to correct maintenance regime. Life expectancy of finishes Product support for Architects, specifiers and may exceed 20 years, however there are end users limitations, and it is very important to be aware of the project environment as powder coating may VulcaLap® samples are readily available on not be appropriate for every situation. Consult request. Property owners, Facilities managers and Vulcan technical team at an early stage if the Architects can send us drawings, sketches or project is close to marine, industrial or swimming dimensioned pictures to get budget take-off pool. costings. We can send CAD drawings to assist architectural design. Recyclability Aluminium is Fire performance highly recyclable. Recycling scrap aluminium requires only 5% of the energy used to make new VulcaLap® aluminium has been fire tested in fully aluminium from the raw ore. More than 90% of the finished state to EN ISO 13823 and EN ISO 1716 aluminum in building and automotive parts is giving combined test result: EN 13501-1: 2007+A1: recycled at the end of use, and an estimated 85% 2009: Reaction to fire classification: A2-s1,d0 for of the aluminium used in buildings today comes the complete RAL spectrum and wood finishes; from recycled material with no loss of A1-s1,d0 classification for anodised finishes. performance. VulcaLap® can be used in all situations requiring limited combustibility, including rainscreen to 5

Kaycan Naturetech Prestige Plank Details 1 - 3 Soffit Flymesh 10mm Vertical Continuous Vertical Airflow Batten @ Airflow Batten @ 407mm C/C Slots 407mm C/C Naturetech Prestige Naturetech Breathable Prestige Membrane Breathable Membrane 3A Top airflow in soffit 3 Top airflow in cladding Naturetech Vertical Naturetech Vertical Prestige Batten @ Prestige Batten @ 407mm C/C 407mm C/C Caulking Joint 50mm Breathable air passage Membrane Drip Trim Horizontal Caulking Flymesh Batten Joint Reveal piece Reveal piece Drip all edges painted (cut down board) Trim All joints caulked Airflow J-trim J-trim reveal corner Reveal corner Naturetech Horizontal 10mm Flymesh Prestige Batten Airflow Vertical 50mm Naturetech Batten @ air passage Prestige 407mm C/C Vertical Breathable Batten @ Membrane 407mm C/C 2A Air venting at the window 2 Airflow around window Naturetech Vertical Naturetech Vertical Prestige Batten @ Prestige Batten @ 407mm C/C 407mm C/C Starter track Breathable 3.655m Breathable Membrane Membrane 150mm Starter track Flymesh Ground PVC white 3.655m Clearance vent 30 x 15 150mm Ground Clearance 1 Starter track, flymesh 1A Starter track, pvc vent VULCAN CLADDING SYSTEMS C copyright of this drawing is owned by Vulcan Cladding Systems and may not be copied 4 Imperial Way, Croydon, CR0 4RR or reproduced in whole or in part without the written permission of Vulcan Cladding Systems T:020 8681 0617 www.vulcansystems.co.uk VCS-2404-NT-05 A 6

Kaycan Naturetech Prestige Plank Details 4-11 Breathable Breathable Membrane Membrane Airflow Airflow Cavity Cavity CW32A Naturetech Paint cut edge CP40A machine into and nail heads Fix with adhesive corner post on site 4 90° External corner angle 5 Naturetech external corner Airflow Breathable Breathable Cavity Membrane Membrane J-trim Airflow Apply caulk to rebate Cavity before fixing Naturetech Prestige 8mm Gap Between Boards 6 90° Internal corner detail 7 Plank joint moulding Double batten Breathable Membrane Breathable Membrane Naturetech Paint cut edges and machined into trim nail heads Airflow Cavity section on site Naturetech 9 Continuous vertical joint Prestige Breathable 8mm Gap Membrane Between Boards CW32A -135 CP32A - 135 8 Reverse joint trim and caulking Fix with adhesive Breathable Membrane CW32A -135 CP32A -135 Aluminium angle fix with adhesive AirfCloawvity AirfCloawvity 10 135° External aluminium angle 11 135° Internal aluminium angle VULCAN CLADDING SYSTEMS C copyright of this drawing is owned by Vulcan Cladding Systems and may not be 4 Imperial Way, Croydon, CR0 4RR copied or reproduced in whole or in part without the written permission of Vulcan Cladding Systems T:020 8681 0617 www.vulcansystems.co.uk VCS-2404-NT-04 A 7

Kaycan Naturetech (Plan detail) (Plan detail) Prestige Plank Details 12 - 17 J-trim Window Breathable Membrane Breathable Reveal piece Airflow Membrane (cut down board) cavity all joints caulked Airflow Naturetech Allow 4mm gap Cavity timber batten Prestige in j-trim Naturetech J-trim Prestige Allow 4mm gap in j-trim 12 J-trim window jamb (light duty) 13 J-trim abutment (Plan detail) (Cross section) Breathable Membrane Breathable Window Naturetech Air Membrane Reveal piece Prestige Passage (cut down board) Airflow all joints caulked Caulking cavity Timber batten RCW section RCW Timber batten section Window 4mm Caulk Reveal joint piece Naturetech Prestige 14 RCW - window jamb (heavy duty) 15 RCW - window head (heavy duty) (Cross section) Breather (Cross section) Breathable paper Membrane Timber batten Naturetech Prestige Naturetech Prestige Starter track Plank and 3.655m battens Flymesh cut to roof slope 50mm Clearance Leadwork 50mm Painted Flymesh Clearance edge Brick Airflow course Tile 16 Starter detail to dwarf wall 17 Drip detail to sloped roof VULCAN CLADDING SYSTEMS C copyright of this drawing is owned by Vulcan Cladding Systems and may not be 4 Imperial Way, Croydon, CR0 4RR copied or reproduced in whole or in part without the written permission of Vulcan Cladding Systems T:020 8681 0617 www.vulcansystems.co.uk VCS-2404-NT-07 A 8

Naturetech Cladding System Vertical details VUL.FVT1 Top vent trim (flush) to soffit VUL.FVT1 19 x 50 mm 8mm gap, cut end painted Naturetech reveal piece Top vent trim, flush Vertical battens (cut down plank) @ 400 - 600 mm c/c V290 Naturetech Drip trim Prestige 32 X 50 mm vertically laid Horizontal battens @ 400 c/c 400 mm c/c Window opening Ground 150 mm clearance 1:20 VUL115 J - trim 8 mm gap Vertical 19 x 50 mm battens provide air flow around windows 19 x 50 vertical battens FIRESH-BM 50 x 32 mm horizontal battens @ 400 c/c Breather membrane Fireshield recommended Vertical Naturetech no base trim required - paint cut ends CW40A / CP40A Naturetech Prestige VUL.BVT1 External 40 x 40 mm corner angle vertically laid 21 x 21 mm smooth/woodgrain aluminium vent Fix to plank with external grade high bond adhesive. Abrade each surface prior to bonding 150 mm ground clearance VULCAN CLADDING SYSTEMS LTD c Copyright of this drawing is owned by Vulcan Cladding 4 Imperial Way, Systems and may not be copied or reproduced in whole or in part without the written permission of Vulcan Cladding Systems Croydon, CR0 4RR T:020 8681 0617 VCS-6784-NT-04 A www.vulcansystems.co.uk 9

VUL.RVT1 Detail F Airflow Detail D Top recessed Detail E vent trim VUL115 Detail D J-trim Detail A Horizontal Ground Airflow 19x50mm batten clearance 150 mm Detail B 400mm c/c Airflow Detail C KCN.ST.02 Starter track 1:20 VUL.BVT1 Bottom vent trim Timber structure 400mm c/c Naturetech Plank Detail A 8 mm gap CW40A / CP40A External 40x40mm corner angle smooth/woodgrain Short batten to fix the joint profile to KCN.JT K Joint profile Sta Detail B 10

Naturetech Cladding System Detail F Horizontal Details VUL.RVT1 Window opening Top recessed vent trim n to soffit Battens above and below windows: stop 50mm short to give continuous airflow to all areas 3mm painted 19x50mm joint horizontal batten V290 c Copyright of this drawing is owned by Vulcan Cladding Drip trim Systems and may not be copied or reproduced in whole or in part without the written permission of Vulcan Cladding Systems Naturetech block to support VCS-6784-NT-04 A head of face- fixed window 11 19x50mm Vertical batten FIRESH-BM Breather Membrane Fireshield recommended Magboard or plywood sherthing board VUL.BVT1 21x21mm Vent angle or FLYMES Flymesh KCN.ST.02 Detail C arter track VULCAN CLADDING SYSTEMS LTD 4 Imperial Way, Croydon, CR0 4RR T:020 8681 0617 www.vulcansystems.co.uk

Vulcan Cladding Systems Limited 4 Imperial Way, Airport Industrial Estate, Croydon CR0 4RR Tel: +44 (0) 208 681 0617 Fax: +44 (0) 208 256 5977 [email protected] www.vulcansystems.co.uk Due to printing limitations, colours shown are for guidance only