CHROM4_Catalogue 2019_Web2

Index Sample Handling Table of Content.........................................................................................................................................................................1 Introduction to Sample Handling................................................................................................................................................2 Autosampler Products............................................................................................................................................... 3-27, 32-34 96-Well Storage and Collection Plates.............................................................................................................................. 28-31 Certified Vials...........................................................................................................................................................................22 Sample Preparation Filtration Filter Membrane Compatibility Chart ......................................................................................................................................35 Filter Vials .. ........................................................................................................................................................................ 40-41 InnoSep™ Membrane Filters ..................................................................................................................................................39 InnoSep™ Syringe Filters .......................................................................................................................................................38 Syringe and Membrane Filters - Selection Guide ............................................................................................................. 36-37 Solid Phase Extraction Iris™ Polymeric SPE ......................................................................................................................................................... 42-63 LC Columns Partisil® ...................................................................................................................................................................................65 Partisphere® ...........................................................................................................................................................................64 Reprosil® .................................................................................................................................................................................67 Ultrasphere® ...........................................................................................................................................................................66 LC Accessories Agilent™ Compatible Parts, Lamps & Replacement Parts .....................................................................................................68 Shimadzu Lamps & Replacement Parts .................................................................................................................................69 Waters Lamps & Replacement Parts ................................................................................................................................ 70-71 ASI Flow Splitters ....................................................................................................................................................................74 ASI HPLC Pumps ....................................................................................................................................................................72 ASI Mixers ...............................................................................................................................................................................74 ASI Precolumn and Inline Filters .............................................................................................................................................73 ASI Quick & Easy Guard Column Housing and Cartridge ......................................................................................................73 GC Columns & Accessories ................................................................................................................................ 81-91 Dissolution Accessories Baskets, Basket Storage, Shafts and Paddles .......................................................................................................................78 Chrom4 Quartz Cuvettes ........................................................................................................................................................75 Introduction to Dissolution .......................................................................................................................................................76 Sampling Cannula and Cannula Filters ..................................................................................................................................79 Sinkers, Basket Shafts and Vessel Stands .............................................................................................................................80 Vessels and Covers ................................................................................................................................................................77 Degassers Model 2003 Degasser..............................................................................................................................................................93 Future Developments.............................................................................................................................................................92 Mentioned trademarks are registered trademarks of their respective owners. No license or immunity under any patent is granted or implied by our sale of any material. Chrom4 is not affiliated with any of the following companies listed, or their products. Products listed under the following companies are compatible with their instrumentation. Agilent, Beckman, Bruker, CTC/Leap, Perkin Elmer, Shimadzu, Waters. Chrom4 is not an authorized seller of AGILENT branded parts and does not sell genuine AGILENT parts. Chrom4 only offers parts compatible with Agilent products.

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Table of Contents 96-Well Storage and Collection Plates 96-Well Assay Conical Bottom Plate .............................................................................................................................................28 96-Well 2mL Filter Plate ................................................................................................................................................................28 96-Well Cap Mats ..........................................................................................................................................................................28 96-Well EVA Sealing Mats .............................................................................................................................................................28 96-Well, Deep, Round ....................................................................................................................................................................30 96-Well, Deep, Square ...................................................................................................................................................................29 96-Well, Round, Low Profile Plate .................................................................................................................................................31 96-Well, Riplate®, Deep, Round ....................................................................................................................................................31 96-Well, Shallow, Round ................................................................................................................................................................29 Autosampler Products Agilent™ Compatible Parts Crimp Vials, Caps and Inserts ..................................................................................................................................................... 3-4 Microvials and Caps .........................................................................................................................................................................9 Screw Vials, Caps and Inserts for Agilent™ Compatible Parts 1090, 1100, 1200 (HP’s robotic arm) ....................................... 5-6 Snap Vials, Caps and Inserts ...................................................................................................................................................... 7-8 Beckman Autosampler Products Screw Vials, Caps and Inserts .......................................................................................................................................................10 TechComp Autosampler Products (Formerly Bruker/Varian) Screw Vials, Caps and Inserts ................................................................................................................................................. 11-12 Screw/Crimp Microvials ..................................................................................................................................................................12 CTC/LEAP Autosampler Products CTC/LEAP Headspace Vials - Screw, Crimp, SPME ....................................................................................................................15 Screw Vials, Caps and Inserts ................................................................................................................................................. 13-14 Perkin Elmer Autosampler Products Crimp Vials, Caps ..........................................................................................................................................................................17 Screw Vials, Caps and Inserts .......................................................................................................................................................16 Snap Vials, Caps and Inserts ........................................................................................................................................................17 Shimadzu Autosampler Products Crimp Vials, Caps ..........................................................................................................................................................................19 Screw Vials, Caps and Inserts .......................................................................................................................................................18 Waters Autosampler Products Screw Vials, Caps and Inserts .......................................................................................................................................................20 Waters Wisp 48 and 96 position Screw Vials, Shell Vials, Caps and Inserts................................................................................21 Certified Vials ...............................................................................................................................................................................................22 Combi-Kits Vial and Cap - Not assembled .......................................................................................................................................................23 Vial and Cap - Pre-assembled .......................................................................................................................................................23 Crimpers ........................................................................................................................................................................................................24 Decappers .....................................................................................................................................................................................................24 Headspace Vials Agilent™ Compatible Parts, TechComp, Tekmar ..........................................................................................................................25 CTC/Leap, Perkin Elmer .......................................................................................................................................................... 25-26 High Recovery Vials High Recovery Vial.........................................................................................................................................................................27 InSert Vial........................................................................................................................................................................................27 Storage Vials & Caps ...................................................................................................................................................................................24 Vial Selection Chart................................................................................................................................................................................. 32-34 Mentioned trademarks are registered trademarks of their respective owners. No license or immunity under any patent is granted or implied by our sale of any material. Chrom4 is not affiliated with any of the following companies listed, or their products. Products listed under the following companies are compatible with their instrumentation. Agilent, Beckman, Bruker, CTC/Leap, Perkin Elmer, Shimadzu, Waters. Chrom4 is not an authorized seller of AGILENT branded parts and does not sell genuine AGILENT parts. Chrom4 only offers parts compatible with Agilent products. [email protected] :: www.chrom4.com 1

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Introduction At Chrom4 we are known for our world class products. We only supply caps from the main manufacturers, who Our Sample Handling line is one of the most extensive supply 90% of the industry and we consider this the lines available in the chromatography industry. standard. We have top notch quality suppliers for vials, caps and inserts as well as Porvairʼs and Ritterʼs excellent lines Our cap manufacturers also use photo camera of 96-well plates and mats. inspection. Our vials are produced under the most stringent conditions with highly sophisticated production We carry a wide variety of caps enabling you to choose technology out of 1st hydrolytic class glass. what is right for your applications. Only Schott glass is used as raw material, which results in an outstanding product. Septum Material Compatible with Resealability Max Rubber ACN, acetone, DMF, Temp Quality control and inspection Opto-electronic (Natural or Butyl) alcohols, diethy­ lamine, DMSO, Excellent <100°C (photo camera) devices on the glass machines measure phenols within fractions of a second, whether the vial meets our specifications. A second photo camera inspection PTFE/Natural or PTFE resistance checks for cosmetic errors (cracks, chips) in the Butyl Rubber until punctured, then glass. septa or liner will have Good <100°C Length gauging equip- <200°C ment measures compatibility of rubber <200°C dimensional specifications in Silicone/Silicone Alcohol, acetone, Excellent addition to the camera Rubber ether, DMF, DMSO inspection. When a vial is not according to specification, it PTFE resistance automatically goes to waste. PTFE/Silicone, until punctured, then The vials are packed in a cleanroom, therefore avoiding PTFE/Silicone/PTFEsepta or liner will have Average any chance of contamination. compatibility of silicone A manual random inspection and a final inspection to ISO and other quality standards assure you of a great, VITON Chlorinated solvents, Good <260°C problem free and reliable product. benzene, toluene, alcohols, hexane, heptane We believe we supply the highest quality product available in our industry. Constant improvement on existing products, such as quality, packaging, etc. are part of our policy to service you better. This will provide you high quality products with a price/performance ratio enabling better control of your consumables budget. We showcase a large number of new products to make your sample handling in the lab more efficient. We have highlighted our most popular items for your convenience. Our other sample handling products, such as inserts, high recovery vials, 96-well plates and mats have the same stringent quality procedures during manufacturing. We are proud to serve you. If you would like to receive samples of our sample handling products, please contact us. 2 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Agilent™ Autosampler Products • Our glass products are borosilicate USP class 1 These vials require a 9-425 screw cap, available in various • Strain point : 565°C colours for colour-coding of your samples (see pages 5-6). For • Please note that some manufacturers refer to Biopharma applications, we recommend a PTFE/Silicone liner. Most of Agilent™ GC and some LC applications use 11mm cri 2mL vials as 1.5mL or 1.8mL mp vials with compatible 11mm aluminum crimp cap available in 5 colours (see page 4). Our recommended vials, caps and inserts are specifically Some chemists prefer a snap vial, which requires a 11mm snap designed and compatible for Agilent™ autosamplers. cap. For snap vials and caps see page 7-8. In general, Agilent™ autosamplers use a 9mm For 8mm crimp vials and Headspace vials, please refer to thread screw vial (sometimes called ROBO or DP vial). page 9 and page 25 respectively. Crimp Vials, Caps and Inserts See page 22 for our QC certified vials. The best verification in the industry. Ordering Information - 2mL Crimp Vials, 12 x 32mm, 11mm Opening PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part Small Opening 2mL Clear Glass Vial - VT011-1232 Large Opening 2mL Clear Glass Crimp Vial 5183-4491/5181-3375 VT011L-1232 2mL Clear Glass Crimp Vial w/marking spot 5183-4492/5182-0543 VT011LM-1232 2mL Amber Glass Crimp Vial w/marking spot 5181-3376/5183-4493 VT11LM-1232A Small Opening Large Opening VT011L-1232 VT011-1232 VT011LM-1232A VT011LM-1232 Ordering Information - Inserts PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part I005BS-625 50µL Glass LV Insert with Bottom Spring* - 5181-1270 I025BS-629 250µL Glass Conical Insert with Bottom Spring - I025PBS-629 250µL Polypropylene Insert with Bottom Spring - 5181-3377 I025-531 250µL Glass Flat Bottom Insert for 2mL small opening Crimp Vials - 5183-2085 I025-630 350µL Glass Flat Bottom Insert for 2mL LO Crimp Vials I025GF-631 250µL Glass BM Hanging Conical Point Insert I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL LO Crimp Vials *Please note that 50µL glass inserts I025-630 I025-531 I025GF-631 actually hold a larger volume I025PBS-629 I025CP-631 I025BS-625 I025BS-629 [email protected] :: www.chrom4.com 3

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Ordering Information - 11mm Aluminum Crimp Caps with Septa PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part C142-11 11mm Silver Crimp Cap, PTFE/Butyl Rubber 5183-4498 5181-1215 C141-11B 11mm Blue Crimp Cap, PTFE/Synthetic 5181-1216 C141-11G 11mm Green Crimp Cap, PTFE/Synthetic - C141-11Go 11mm Gold Crimp Cap, PTFE/Synthetic 5181-1217 C141-11R 11mm Red Crimp Cap, PTFE/Synthetic 5183-4500/5182-0552 C150-11 11mm Silver Crimp Cap, PTFE/Silicone 5183-4499/5181-1211 C160-11 11mm Silver Crimp Cap, PTFE/Silicone/PTFE - C170-11 11mm Magnetic Crimp Cap, PTFE/Silicone - C190-11 11mm Silver Crimp Cap, Red PTFE/White Silicone with Slit C150-11 C160-11 C170-11 C141-11GO C190-11 C142-11 C141-11B C141-11R C141-11G Crimpers & Decappers see page 24 4 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Screw Vials, Caps and Inserts for Agilent™ robotic arm 1090, 1100, 1200 Ordering Information - 2mL Screw Vials, 12 x 32mm, 9mm thread PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part VT009-1232 VT009M-1232 2mL Clear Glass Screw Vial 5182-0714/5183-2067 VT009M-1232A VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot 5182-0715/5183-2068 V0309P-1232 V0159P-1232 2mL Amber Glass Screw Vial with Marking Spot 5182-0716/5183-2069 2mL Clear Glass Screw Vial with Marking Spot, Silanized 5183-2071 300µL PP Short Thread Micro Vial, 12 x 32mm - 2mL PP Short Thread Screw Vial with graduated volume, 12 x 32mm - VT009-1232 V0159P-1232 VT009M-1232A VT009M-1232 Ordering Information - Inserts PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part - I005BS-625 50µL Glass LV Insert with Bottom Spring* I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-1270 I025BS-629S 250µL Glass Conical Insert with Bottom Spring, Silanized 5181-8872 I025PBS-629 250µL Polypropylene Insert with Bottom Spring - I025-630 350µL Glass Flat Bottom Insert 5181-3377 I025GF-631 250µL Glass BM Hanging Conical Point Insert - I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL WM Crimp Vials 5183-2085 *Please note that 50µL glass inserts actually hold a larger volume I025PBS-629 I025-630 I025CP-631 I025BS-629 [email protected] :: www.chrom4.com 5

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Ordering Information - 9mm Screw Caps with Septa* PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part C394E-09B C394E-09G 9mm Ribbed Blue Screw Cap, FEP/ButylRubber 5182-0717 C394E-09R C395E-09B 9mm Ribbed Green Screw Cap, FEP/ButylRubber 5182-0718 C395E-09G C395E-09R 9mm Ribbed Red Screw Cap, FEP/ButylRubber 5182-0719 C395E-09Y C395EB-09SBL 9mm Ribbed Blue Screw Cap, PTFE/Silicone 5182-0720 C395E-09SB C395E-09SG 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone 5182-0721 C396-09SB C396-09SG 9mm Ribbed Red Screw Cap, Red PTFE/White Silicone 5182-0722 C396-09SR C396-09SY 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone - C397E-09B C397E-09R 9mm Ribbed Black Screw Cap, Blue PTFE/White Silicone - C397E-09G 9mm Smooth Blue Screw Cap, PTFE/Silicone 5182-0720 C397E-09Y 9mm Smooth Green Screw Cap, Red PTFE/White Silicone 5182-0721 9mm Smooth Blue Screw Cap, PTFE/Silicone/PTFE 5182-0723 9mm Smooth Green Screw Cap, PTFE/Silicone/PTFE 5182-0724 9mm Smooth Red Screw Cap, PTFE/Silicone/PTFE 5182-0725 9mm Smooth Yellow Screw Cap, PTFE/Silicone/PTFE - 9mm Ribbed Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076 9mm Ribbed Red Screw Cap, Red PTFE/White Siliconee with Slit* 5183-2078 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone with Slit* 5183-2077 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone with Slit* - C397E-09SB 9mm Smooth Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076 C397E-09SR 9mm Smooth Red Screw Cap, Red PTFE/White Silicone with Slit* 5183-2078 *Slitted cap recommended for UHPLC C39E-09B C394E-09R C395E-09R C395E-09B C397E-09B C394E-09XG C395E-09XY C395E-09G C396-09SB Combi-Kits consist of 100 vials Ask us for our convenient & and 100 matching caps. transparent Combi-Kit. Combi-Kits available. See pages 23. 6 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Snap Vials, Caps and Inserts Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part 5182-2068/5182-0546 VT011SM-1232 2mL Clear Glass Snap Vial with Marking Spot 5181-0545/5181-2069 9301-0977 VT11SM-1232A 2mL Amber Glass Snap Vial with Marking Spot 5183-2087 5183-4731 V0111P-1232 100µL LVV Crimp/Snap Ring Vial, 11mm thread V0300P-1232 300µL Conical, Ultraclean Polypropylene, Snap/Crimp Top V0711P-1232 750µL Conical LVV Vial, Polypropylene, Snap/Crimp Top V0300P-1232 VT11SM-1232A VT011SM-1232 Ordering Information - Inserts PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part - I005BS-625 50µL Glass LV Insert with Bottom Spring* 5181-1270 I025BS-629 250µL Glass Conical Insert with Bottom Spring 5181-8872 I025BS-629S 250µL Glass Conical Insert with Bottom Spring, Silanized - 5181-3377 I025PBS-629 250µL Polypropylene Insert with Bottom Spring - I025-630 350µL Glass Flat Bottom Insert I025BS-629 I025GF-631 250µL Glass BM Hanging Conical Point Insert * Please note that 50µL glass inserts actually hold a larger volume I025PBS-629 I025-630 No matter what chromatography vial, cap or insert you are looking for 7 Chrom4 carries it! [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Ordering Information - 11mm Snap Caps with Septa PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part C240-11 11mm Natural Snap Cap with PTFE/Butyl Rubber C250BS-11 11mm Blue Snap Cap with Red PTFE/White Silicone 5182-0550 C250CS-11 11mm Natural Snap Cap with PTFE/Silicone 5182-0541 C250PBS-11 11mm Blue Snap Cap with Clear PTFE/Blue Silicone 5182-3458 C260S-11 11mm Blue Snap Cap with Red PTFE/White Silicone/Red PTFE - C270BS-11 11mm Blue Snap Cap with Red PTFE/White Silicone Slitted C270CS-11 11mm Clear Snap Cap with Red PTFE/White Silicone Slitted 5182-0560 C270CBS-11 11mm Clear Snap Cap with Blue PTFE/White Silicone Slitted - C270CBS-11X 11mm Clear Snap Cap with Blue PTFE/White Silicone with Cross Slit - - C299-11 11mm Natural Snap Cap with 6mills Foil - - * Note: For analytes where PTFE interferes with the sample, such as PFOS, PFOA etc., used in combination with V0300P-1232 C240-11 C260-11 C240-11BL C250-11 C270CS-11 C250-BS11 N/A N/A C250-BS11 N/A Looking for compatible headspace vials for your Agilent™ autosampler? See page 25 for headspace vials and caps. CLS-0030 CLS-9980 V06020-2338X VXX020-2375XP CLS-9508 VX0020-2346X 8 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Agilent™ Compatible Microvials and Caps Ordering Information - Microvials PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part V0308-632 300µL Clear Round Bottom Glass Crimp Vial, 8mm V1111-1232 1.1mL Clear Tapered Bottom Glass Crimp Vial, 11mm - V1108-1232 1.1mL Clear Tapered Bottom Glass Screw Vial, 8-425 - V01511-1232 1.5mL Clear Glass Crimp V-Vial, 12 x 32mm, 11mm - V01511-1232A 1.5mL Amber Glass Crimp V-Vial, 12 x 32mm, 11mm 5184-3551 V01511S-1232 1.5mL Clear Glass Snap/Crimp V-Vial, 12 x 32mm, 11mm 5184-3555 V01511S-1232A 1.5mL Amber Glass Snap/Crimp V-Vial, 12 x 32mm, 11mm 5184-3552 V01508-1232 1.5mL Clear Glass Screw V-Vial, 12 x 32mm, 8mm 5184-3556 V01508-1232A 1.5mL Amber Glass Screw V-Vial, 12 x 32mm, 8mm - V01509-1232 1.5mL Clear Glass Screw V-Vial, 12 x 32mm, 9mm - V01509-1232A 1.5mL Amber Glass Screw V-Vial, 12 x 32mm, 9mm 5184-3550 VB311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert 5184-3554 V0708-840 700µL Clear Flat Bottom Crimp Vial, 8mm 9301-1388 V0708-840A 700µL Amber Tapered Bottom Crimp Vial, 8mm - - V01511-1232 V01511S-1232 VB311MC-1232 V01511-1232A V0308-632 V0708-840A V01511S-1232A V1111-1232 V1108-1232 VB311M-1232 Ordering Information - 8mm Crimp Caps with Septa V01509-1232 V01509-1232A PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part C141-08 8mm Silver Crimp Cap, PTFE/ Natural Rubber C150P-08EZ 8mm Silver Crimp Cap, Red PTFE/White Silicone - C190P-08 8mm Silver Crimp Cap, Red PTFE/White Silicone with Slit - - For 9mm screw caps refer to page 6. C141-08 For 11mm crimp caps refer to page 4. C150P-08E2 C180-08 [email protected] :: www.chrom4.com 9

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Beckman/Hitachi Beckman Autosampler Products • Our glass products are borosilicate USP class 1 Beckman autosamplers use a 8mm thread screw vial. • Strain point : 565° C These vials require a 8-425 screw cap, available in various • Please note that some manufacturers refer to colours for colour-coding of your samples. For Biopharma appli cations, we recommend a PTFE/Silicone liner. Most chemists 2mL vials as 1.5mL or 1.8mL prefer 10mm Bruker autosampler vials (see page 11). Wide mouth vials (VT010M-1232) and caps w/PTFE septa Our recommended vials, caps and inserts are specifically (C06050BC-10). Also available in a clamshell. designed and made for Spark(Holland) autosamplers, which Beckman (as well as Bruker) is outfitted with. Screw Vials, Caps and Inserts Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening PART NO. (100pk) DESCRIPTION VT008M-1232 2mL Clear Glass Screw Vial with Marking Spot VT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot I01BS-530 VT008M-1232 I01-531 I025-531 VT008M-1232A Ordering Information - Inserts PART NO. (100pk) DESCRIPTION I01-531 100µL Glass LV Insert, Conical Point, No Spring I01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom Spring I025-531 250µL Glass Flat Bottom Insert Ordering Information - 8mm Screw Caps with Septa PART NO. (100pk) DESCRIPTION CLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y CLS39939 10 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats TechComp (Formerly Bruker/Varian) TechComp Autosampler Products • Our glass products are borosilicate USP class 1 Most chemists prefer 10mm wide mouth vials • Strain point : 535° C (VT010M-1232) and caps w/PTFE septa (C06050BC-10). • Please note that some manufacturers refer to Also available in a clamshell. For Biopharma applications, we recommend a PTFE/ 2mL vials as 1.5mL or 1.8mL Silicone liner. Our recommended vials, caps and inserts are specifically VT010M-1232 designed and made for Marathon Spark(Holland) autosamplers, which TechComp LCʼs are outfitted with. TechComp autosamplers use a 8mm thread screw vial as well as the more convenient 10mm thread screw vials (sometimes called ABC or Wide Mouth vial). Screw Vials, Caps and Inserts VT010M-1232A Ordering Information - 2mL Screw Vials, 12 x 32mm, 10mm Opening PART NO. (100pk) DESCRIPTION VT010M-1232 2mL Clear Big Mouth Glass Screw Vial with Marking Spot VT010M-1232A 2mL Amber Big Mouth Glass Screw Vial with Marking Spot Ordering Information - Inserts PART NO. (100pk) DESCRIPTION I005BS-625 50µL Glass LV Insert with Bottom Spring* I025BS-629 250µL Glass Conical Insert with Bottom Spring I025-630 350µL Glass Flat Bottom Insert I025GF-631 250µL Glass BM Hanging Conical Point Insert I025PBS-629 250µL Polypropylene Insert with Bottom Spring * Please note that 50µL glass inserts actually hold a larger volume For insert images refer to page 7 Ordering Information - 10mm Screw Caps w/Septa PART NO. (100pk) DESCRIPTION C06050-10 10mm Black Open-Hole Screw Cap, Tan PTFE/Silicone 60mil C06050-10 C06050-10S [email protected] :: www.chrom4.com 11

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats TechComp (Formerly Bruker/Varian) Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening PART NO. (100pk) DESCRIPTION VT008M-1232 2mL Clear Glass Screw Vial with Marking Spot VT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot Ordering Information - Inserts PART NO. (100pk) DESCRIPTION I01-531 100µL Glass LV Insert, Conical Point, No Spring I01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom Spring I025-531 250µL Glass Flat Bottom Insert VT008-1232 I01BS-530 VT008M-1232 VT008M-1232A I01-531 I025-531 Ordering Information - 8mm Screw Caps w/Septa PART NO. (100pk) DESCRIPTION CLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y CLS39939 Ordering Information - 1.1mL Screw/Crimp Microvial and Cap PART NO. (100pk) DESCRIPTION V1108-1232 1.1mL Clear Tapered Bottom Glass Screw Vial, 8-425 V1111-1232 1.1mL Clear Tapered Bottom Glass Crimp Vial, 11mm For 11mm crimp caps refer to page 4 12 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats CTC/LEAP CTC/LEAP Autosampler Products • Wide opening enables easy filling with viscous materials • Improved label with filling lines makes handling easier • Convenience Packs available VT009-1232 VT009M-1232 VT009M-1232A Screw Vials, Caps and Inserts Ordering Information - 2mL Short Thread Screw Vials, 12 x 32mm, 9mm Opening PART NO. (100pk) DESCRIPTION VT009-1232 2mL Clear Glass Screw Vial VT009M-1232 2mL Clear Glass Screw Vial with Marking Spot VT009M-1232A 2mL Amber Glass Screw Vial with Marking Spot VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanized Ordering Information - Clear Glass Inserts PART NO. (100pk) DESCRIPTION I025BS-629 250µL Glass Conical Insert with Bottom Spring I025-630 350µL Glass Flat Bottom Insert I025GF-631 250µL Glass BM Hanging Conical Point Insert I025BS-629 I025GF-631 I025-630 13 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats CTC/LEAP Ordering Information - 9mm Screw Caps with Septa* PART NO. (100pk) DESCRIPTION Agilent™ HP Part C394E-09B 9mm Ribbed Blue Screw Cap, FEP/ButylRubber 5182-0717 C394E-09G 9mm Ribbed Green Screw Cap, FEP/ButylRubber 5182-0718 C394E-09R 9mm Ribbed Red Screw Cap, FEP/ButylRubber 5182-0719 C395E-09B 9mm Ribbed Blue Screw Cap, PTFE/Silicone 5182-0720 C395E-09G 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone 5182-0721 C395E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Silicone 5182-0722 C395E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone - C395EB-09SBL 9mm Ribbed Black Screw Cap, Blue PTFE/White Silicone - C395E-09SB 9mm Smooth Blue Screw Cap, PTFE/Silicone 5182-0720 C395E-09SG 9mm Smooth Green Screw Cap, Red PTFE/White Silicone 5182-0721 C396-09SB 9mm Smooth Blue Screw Cap, PTFE/Silicone/PTFE 5182-0723 C396-09SG 9mm Smooth Green Screw Cap, PTFE/Silicone/PTFE 5182-0724 C396-09SR 9mm Smooth Red Screw Cap, PTFE/Silicone/PTFE 5182-0725 C396-09SY 9mm Smooth Yellow Screw Cap, PTFE/Silicone/PTFE - C397E-09B 9mm Ribbed Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076 C397E-09R 9mm Ribbed Red Screw Cap, Red PTFE/White Siliconee with Slit* 5183-2078 C397E-09G 9mm Ribbed Green Screw Cap, Red PTFE/White Silicone with Slit* 5183-2077 C397E-09Y 9mm Ribbed Yellow Screw Cap, Red PTFE/White Silicone with Slit* - C397E-09SB 9mm Smooth Blue Screw Cap, Red PTFE/White Silicone with Slit* 5183-2076 C397E-09SR 9mm Smooth Red Screw Cap, Red PTFE/White Silicone with Slit* 5183-2078 *Slitted cap recommended for UHPLC C39E-09B C394E-09R C395E-09R C395E-09B C397E-09B C394E-09XG C395E-09XY C395E-09G C396-09SB 14 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats CTC/LEAP CTC/LEAP Headspace Vials Ordering Information - Screw Headspace Vials & Caps PART NO. (100pk) DESCRIPTION VX0018-2346CTC 10mL Clear Glass Screw Vial, 23 x 46mm, 18-425 VXX018-2375CTC 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425 Ordering Information - Pre-assembled 18mm Magnetic Screw Cap PART NO. (100pk) DESCRIPTION CHR-1309 18mm Magnetic Silver Screw Cap, Silicone Blue Transparent/PTFE White CHR-1414 18mm Magnetic Silver Screw Cap, PTFE White/Silicone Blue CHR-1416 18mm Magnetic Silver Screw Cap, Butyl Red/PTFE Grey VX0018-2375S VX0018-2346S VX0020B-2346X VXX020B-2375X CLS-1416 CLS-1414 CLS-1309 VX0018A-2346S Ordering Information - Crimp Headspace & SPME Vials & Caps PART NO. (100pk) DESCRIPTION VX0020B-2346X 10mL Clear Headspace Glass Crimp Vial, 23 x 46mm, Rounded Bottom VXX020B-2375X 20mL Clear Headspace Glass Crimp Vial, 23 x 75mm, Rounded Bottom VXX020SPME-2375 20mL SPME Clear Headspace Glass Crimp Vial, 23 x 75mm, Rounded Bottom Ordering Information - Pre-assembled 20mm Magnetic Crimp Cap PART NO. (100pk) DESCRIPTION CLS-1535B 20mm Blue BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536G 20mm Green BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536GO 20mm Gold BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1535R 20mm Red BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536S 20mm Silver BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536GO CLS-1535B CLS-1536G CLS-1535R CLS-1536S [email protected] :: www.chrom4.com 15

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Perkin Elmer Perkin Elmer Autosampler Products • Our glass products are borosilicate USP class 1 In our list of vials below, we have tried to be as complete as • Strain point : 565°C possible, however if you have any questions please do not • Please note that some manufacturers refer to hesitate to call us. Perkin Elmer headspace autosamplers require a special 2mL vials as 1.5mL or 1.8mm rounded bottom/ beveled top vial. Please see page 26 for these Our recommended vials, caps and inserts are specifically vials and the corresponding caps. designed and made for Perkin Elmer autosamplers. VT008-1232 Perkin Elmer autosamplers use a variety of screw and/or crimp vials. VT008M-1232 Screw Vials, Caps and Inserts VT008M-1232A Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening PART NO. (100pk) DESCRIPTION VT008M-1232 2mL Clear Glass Screw Vial with Marking Spot VT008M-1232A 2mL Amber Glass Screw Vial with Marking Spot 2mL screw vials for Autosystem GC only. Some customers prefer a 9mm vial for this application. For 9mm vials see page 6. Ordering Information - Inserts PART NO. (100pk) DESCRIPTION I01-531 100µL Glass LV Insert, Conical Point, No Spring I01BS-530 100µL Glass LV Insert, Conical Precision Point, Plastic Bottom Spring I025-531 250µL Glass Flat Bottom Insert I01BS-530 C9SF-08Y I01-531 I025-531 CLS39939 Ordering Information - 8mm Screw Caps with Septa PART NO. (100pk) DESCRIPTION CLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone 16 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Perkin Elmer Snap Vials, Caps and Inserts Perkin Elmer headspace vials on page 26 Ordering Information - 2mL Snap Vials, 12 x 32mm, 11mm Opening PART NO. (100pk) DESCRIPTION VT011SM-1232 2mL Clear Glass Snap Vial with Marking Spot VT11SM-1232A 2mL Amber Glass Snap Vial with Marking Spot V0111P-1232 100µL LVV Crimp/Snap Ring Vial, 11mm thread V0300P-1232 300µL Conical, Ultraclean Polypropylene, Snap/Crimp Top V0711P-1232 750µL Conical LVV Vial, Polypropylene, Snap/Crimp Top VT011SM-1232 Snap vials & caps fit Autosystem GC, AI-1, Integral 4000, ISS-100 & V0300P-1232 VT011SM-1232A ISS-200, LC 600(60), 420/b and 4900. For the above mentioned autosamplers, you can use snap vials and caps or small opening 11mm crimp vials (see page 3). Ordering Information - Inserts PART NO. (100pk) DESCRIPTION I005BS-625 50µL Glass LV Insert with Bottom Spring* I025BS-629 250µL Glass Conical Insert with Bottom Spring I025PBS-629 250µL Polypropylene Insert with Bottom Spring I025-630 350µL Glass Flat Bottom Insert I025GF-631 250µL Glass BM Hanging Conical Point Insert * Please note that 50µL glass inserts actually hold a larger volume For insert images refer to page 3. For snap caps refer to page 8. Crimp Vials, Caps Ordering Information - 8mm Crimp Vials PART NO. (100pk) DESCRIPTION V0308-632 300µL Clear Round Bottom Glass Crimp Vial, 8mm V0708-840 700µL Clear Flat Bottom Glass Crimp Vial, 8mm V0708M-840A 700µL Amber Tapered Bottom Glass Crimp Vial, 8mm with Graduation V0808-840 1.2mL Clear Glass Crimp Vial, 8mm Ordering Information - 8mm Crimp Caps PART NO. (100pk) DESCRIPTION C141-08 8mm Silver Crimp Cap, PTFE/ Natural Rubber C150P-08EZ 8mm Silver Crimp Cap, PTFE/ Silicone V0308-632 V0808-830 C141-08 C150P-08 C180-08 V0608-840A V0708-840A 17 8mm flat bottom vials and caps fit AS-100, 100B, 300, 8300 and AI-1 autosamplers [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Shimadzu Shimadzu Autosampler Products • Our glass products are borosilicate USP class 1 Our recommended vials, caps and inserts are designed to fit • Strain point : 565°C Shimadzu autosamplers. Shimadzu autosamplers can take 2 • Please note that some manufacturers refer to mL screw cap vials, 2mL crimp cap small opening vials or 4mL screw vials. 2mL vials as 1.5mL or 1.8mL Below you will find a guideline for the various types of autosamplers. Ordering Information - 2mL Screw Vials, 12 x 32mm, 8mm Opening PART NO. (100pk) DESCRIPTION <- Shimadzu autosampler vials to fit : AOC-8B/9,SIL-6A, OC-14/1400, VT008M-1232 2mL Clear Glass Screw Vial w/ Marking Spot SIL-6B & SIL-9A VT008M-1232A 2mL Amber Glass Screw Vial w/ Marking Spot Ordering Information - 8mm Screw Caps with Septa PART NO. (100pk) DESCRIPTION CLS39939 8mm Open Hole Black PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08R 8mm Open Hole Red PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y 8mm Open Hole Yellow PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08W 8mm Open Hole White PP Screw Cap, 8-425 Red PTFE/Silicone C9SF-08Y VF013MM-1545 CLS39939 VF013A-1545 VF013-1545 C06050-13 VF013MA-1545 Ordering Information 4mL Screw Vials, 15 x 45mm, 13mm Opening and Pre-assembled Caps and Septa PART NO. (100pk) DESCRIPTION <- Shimadzu autosampler vials VF013-1545 4mL Clear Screw Glass Vial, 13-425 to fit : AOC-14/1400 & VF013A-1545 4mL Amber Screw Glass Vial, 13-425 SIL-2AS C06050-13 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil For corresponding inserts please see page 21, Waters 4mL vials 18 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Shimadzu Ordering Information - 2mL Crimp Vials, 12 x 32mm, 11mm Opening PART NO. (100pk) DESCRIPTION VT011-1232 VT011A-1232 VT011-1232 2mL Clear Glass Crimp Vial Shimadzu autosampler vials to fit: AOC-14/1400, SIL-6B & SIL-9A Ordering Information - 11mm Aluminum Crimp Caps with Septa PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part 5183-4498 C142-11 11mm Silver Crimp Cap, PTFE/Butyl Rubber 5181-1215 C141-11B 11mm Blue Crimp Cap, PTFE/Synthetic 5181-1216 C141-11G 11mm Green Crimp Cap, PTFE/Synthetic - C141-11GO 11mm Gold Crimp Cap, PTFE/Synthetic 5181-1217 5183-4500/5182-0552 C141-11R 11mm Red Crimp Cap, PTFE/Synthetic 5183-4499/5181-1211 C150-11 11mm Silver Crimp Cap, PTFE/Silicone - - C160-11 11mm Silver Crimp Cap, PTFE/Silicone/PTFE C170-11 11mm Magnetic Crimp Cap, PTFE/Silicone C190-11 11mm Silver Crimp Cap, Red PTFE/White Silicone with Slit C150-11 C160-11 C170-11 C141-11GO C190-11 C142-11 C141-11B C141-11R C141-11G Crimpers & Decappers see page 24 [email protected] :: www.chrom4.com 19

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Waters See page 22 for our QC certified vials. Waters Autosampler Products The Waters Alliance 2690/95, 2790/95 and Acquity use a 2mL 9mm screw thread vial. Some chemists prefer a wide mouth • Our glass products are borosilicate USP class 1 (sometimes called ABC) vial. • Strain point : 535°C With a 9mm opening vial (VT009 Series) most chemists use the 9mm cap w/PTFE septa (C395-09B and C395S-09B). • 4mL (1 dram ) screw vial and 1mL shell vial for For Waters Acquity™ we recommend the slitted cap (C397-09B and C397S-09B). respective 48 and 96 position carousel Also available in a clamshell. The Waters Wisp equipment uses a 4mL screw or 1mL shell vial. • Please note that some manufacturers refer to 2mL vials as 1.5mL or 1.8mL Ordering Information - 2mL Screw Vials, 12 x 32mm, 9mm Thread PART NO. (100pk) DESCRIPTION Waters Part VT009-1232 2mL Clear Glass Screw Vial - VT009M-1232 2mL Clear Glass Screw Vial with Marking Spot 186000273 VT009M-1232A 2mL Amber Glass Screw Vial with Marking Spot 186000848 VT009M-1232S 2mL Clear Glass Screw Vial with Marking Spot, Silanzed WAT063300DV V0159P-1232 2mL PP Short Thread Screw Vial with graduated volume, 12 x 32mm - VT009-1232 VT009M-1232A I025PBS-629 I025BS-629 I025CP-631 I025-630 V0159P-1232 VT009M-1232 For ordering information see page 21 Ordering Information - 9mm Screw Caps with Septa* PART NO. (100pk) DESCRIPTION Waters Part C394-09B 9mm Blue Screw Cap, PTFE/ButylRubber, Bonded - C394-09G 9mm Green Screw Cap, PTFE/ButylRubber, Bonded - C394-09R 9mm Red Screw Cap, PTFE/ButylRubber, Bonded - C394-09Y 9mm Yellow Screw Cap, PTFE/ButylRubber, Bonded - C395-09B 9mm Blue Screw Cap, Beige PTFE/Silicone, Bonded 186000274 C395S-09B 9mm Blue Screw Cap, Beige PTFE/Silicone, Bonded 186000274 C395S-09G 9mm Green Screw Cap, Beige PTFE/Silicone, Bonded 186002130 C395S-09R 9mm Red Screw Cap, Beige PTFE/Silicone, Bonded - C395S-09Y 9mm Yellow Screw Cap, Beige PTFE/Silicone, Bonded - C396-09B 9mm Blue Screw Cap, PTFE/Silicone/PTFE, Bonded - C397-09B*** 9mm Blue Screw Cap, Red PTFE/Silicone with Slit Bonded* 186000305 C397-09R*** 9mm Red Screw Cap, Red PTFE/Silicone with Slit Bonded* - C397S-09B*** 9mm Blue Screw Cap, Beige PTFE/Silicone with Slit Bonded* - C397S-09G*** 9mm Green Screw Cap, Beige PTFE/Silicone with Slit Bonded* -­ C397S-09R*** 9mm Red Screw Cap, Beige PTFE/Silicone with Slit Bonded* *Slitted cap recommended for Waters UPLC™ and UHPLC C394-09B C395S-09B C395S-09G C394-09G C394-09R C396-09B C395S-09Y 20 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Waters Waters Wisp 48 and 96 position For 4mL screw vial images, refer to page 18 Ordering Information - 4mL Screw Vials*, 15 x 45mm, 13mm Opening and Pre-assembled Caps and Septa PART NO. (100pk) DESCRIPTION Waters Part VF013-1545 4mL Clear Screw Glass Vial, 13-425 186000840 VF013A-1545 4mL Amber Screw Glass Vial, 13-425 186001135 C06050-13 13mm Black Open-Hole Bonded Screw Cap, Red PTFE/Silicone 60mil 186000841 C360-13W 13mm White PP Closed Screw Cap, F217/PTFE - Ordering Information - Inserts PART NO. (100pk) DESCRIPTION Waters Part WAT072704 I03-639 250µL Glass Mandrel Point Insert, Requires Metal Spring WAT072708 I03-638X 250µL Glass Conical Insert, Requires Metal Spring I03-639 *Also available as shell vial 48-position tray 96-position tray C360-13W I03-638X VE2078-1545 Ordering Information - Inserts PART NO. (100pk) DESCRIPTION Waters Part I005BS-625 50µL Glass LV Insert with Bottom Spring* - WAT094170 I025BS-629 250µL Glass Conical Insert with Bottom Spring I025PBS-629 250µL Polypropylene Insert with Bottom Spring - - I025-630 350µL Glass Flat Bottom Insert - - I025GF-631 250µL Glass BM Hanging Conical Point Insert I025CP-631 250µL Conical Point Glass Insert, 6 x 31mm for 2mL WM Crimp Vials * Please note that 50µL glass inserts actually hold a larger volume For insert images refer to pages 7 and 20 Ordering Information - 1mL Shell Vials, 8 x 40mm, with plug cap for Wisp PART NO. (100pk) DESCRIPTION Waters Part V800-840C 1mL Clear Shell Vial & Plug QuickPack WAT025054C WAT025053C V800-840A 1mL Amber Shell Vial & Plug QuickPack - V800-840S 1mL Amber Shell Vial & Plug QuickPack, Silanized Inserts for 1mL Shell Vials PART NO. (100pk) DESCRIPTION I01BS-530 100µL Glass LV Insert with Bottom Spring I01PBS-530 100µL PP LV Insert with Bottom Spring I025-629 250µL Mandrel Point Insert, Requires Metal Spring I025BS-629 250µL Glass Conical Insert with Bottom Spring [email protected] :: www.chrom4.com 21

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats LC Certified Combi-Kits LC Certified Combi-Kits - Test parameters Due to customer requests, Chrom4 is now providing QC CleanVial CleanCap Certified vial and cap Combi-Kits. • Glass • Diameter These certified Combi-Kits are identical to the Combi-Kits - Hydrolytic Class 1;51 • Height found on page 23 of the Sample Handling section of this cat­ • Thread Integrity alogue, but will include certificiation documentation. expansion Borosilicate; • Septa Bonding Every batch of LC certified Combi-Kits is tested on 16 critical meets all requirements • Sealing/Resealing Test parameters. The vial and cap combinations are checked for of Phrm. US, EU, JPN; • Extractables blanks and contamination by HPLC/UV and LC-MS testing. class 10.000 clean Certified Combi-Kits include the batch-specific test results room standard Chemical Test­Non- and the HPLC/LC-MS chromatograms. • Height volatile Residue The LC certified Combi-Kit components are shipped • Diameter • HPLC UV Test shrinkwrapped to ensure purity, transport and end user • Bottom Thickness • LC-MS Test safety. • Neck Length • Thread Profile • Annealing Certified Combi-Kits are available in a 2mL Short Thread clear and amber vial with appropriate cap. Other Chrom4 certified Combi-Kits are available on request. Combi-Kits consist of 100 vials and 100 matching caps. Ordering Information - Combi-Kit - Not assembled (Cap in separate compartment) PART NO. (100pk) DESCRIPTION 9mm 9-425 Thread For Agilent™ Compatible Parts - Auto Samplers VT009M/C395ESBCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone VT009MA/C395ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone For Agilent™ Compatible Parts - Auto Samplers VT009M/C397ESBCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone w/ Slit* VT009MA/C397ESBCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit* For Waters Auto Samplers VT009M/C395BCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded VT009MA/C395BCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded For Waters Auto Samplers VT009M/C397BCERT HPLC/LC-MS Certified 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit* VT009MA/C397BCERT HPLC/LC-MS Certified 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded w/Slit* *Slitted cap recommended for Waters UPLC™ and UHPLC 22 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Combi-Kits - Vial and Cap Ordering Information - Vials and Caps - Not assembled (Cap in separate compartment) PART NO. (100pk) DESCRIPTION 9mm 9-425 Thread For Agilent™ Compatible Parts - Auto Samplers VT009/C395ESB 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Combi-Kit VT009M/C395ESB 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Combi-Kit VT009MA/C395ESB 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Combi-Kit For Agilent™ Compatible Parts - Auto Samplers VT009/C397ESB 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone with Slit, Combi-Kit VT009M/C397ESB 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*, Combi-Kit VT009MA/C397ESB 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone with Slit*, Combi-Kit For Waters Auto Samplers VT009/C395B 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-Kit VT009M/C395B 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-Kit VT009MA/C395B 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Silicone, Bonded, Combi-Kit For Waters Auto Samplers VT009/C397B 2mL Clear Screw Vial, Blue Cap, Red PTFE/White Silicone, Bonded with Slit, Combi-Kit VT009M/C397B 2mL Clear Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded with Slit*, Combi-Kit VT009MA/C397B 2mL Amber Screw Vial, Marking Spot, Blue Cap, Red PTFE/White Sil, Bonded with Slit*, Combi-Kit *Slitted cap recommended for Waters UPLC™ and UHPLC Combi-Kits consist of 100 vials and 100 matching caps. Ordering Information - Caps Pre-assembled on Vials PART NO. (100pk) DESCRIPTION 853959B-1232 2mL Clear Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone 853959BA-1232 2mL Amber Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone 853979B-1232 2mL Clear Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone Slitted 853979B-1232A 2mL Amber Vial with Marking Spot Assembled with 9mm Blue Cap Red PTFE/White Silicone Slitted 853979B-1232A 853959B-1232 [email protected] :: www.chrom4.com 23

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Crimpers/Decappers and Storage Vials Manual Crimpers and Decappers Ordering Information - Manual Crimpers and Decappers PART NO. DESCRIPTION CR00-08 CR00-11 8mm Hand Operated Crimper CR00-20 11mm Hand Operated Crimper CR10-08 20mm Hand Operated Crimper CR10-11 8mm Hand Operated Decapper CR10-20 11mm Hand Operated Decapper CR20-08 20mm Hand Operated Decapper CR20-11 8mm Crimp Type Decapper CR20-20 11mm Crimp Type Decapper 20mm Crimp Type Decapper Storage Vials • Storage vials are available in 1, 2, 3 and 4 dram (4mL, 7mL, 12mL and 15mL). • Amber also available Ordering Information - Storage Vials Pack PART NO. (100pk) DESCRIPTION VF013-1545 4mL Clear Screw Glass Vial, 15 x 45mm, 13-425 Thread VS015-1760X VF013A-1545 4mL Amber Screw Glass Vial, 15 x 45mm, 13-425 Thread VF013MM-1545 4mL Clear Screw Glass Vial, w/ Marking Spot, 15 x 45mm, 13-425 Thread VF013MA-1545 4mL Amber Screw Glass Vial, w/ Marking Spot, 15 x 45mm, 13-425 Thread VS015-1760X 7mL Clear Screw Glass Vial, 17 x 60mm, 15-425 Thread VX2015-1965X 10mL Clear Screw Glass Vial, 19 x 65mm, 15-425 Thread V16018-2170X 15mL Clear Screw Glass Vial, 21 x 70mm, 18-425 Thread Storage Caps Ordering Information - Closed Caps with PTFE/F217 Septa. White Virgin Septa (0.015”) or Unlined Caps Available. PART NO. (100pk) DESCRIPTION C360-13W C360-13W 13mm White PP Closed Screw Cap, F217/PTFE C360-15W 15mm White PP Closed Screw Cap, F217/PTFE C360-18W 18mm White PP Closed Screw Cap, F217/PTFE 24 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Headspace Vials Headspace Vials To get reproducible results it is very important that the headspace vials and caps form a tight seal. • Our glass products are borosilicate type 1 In headspace analysis, the sample is sealed into the vial and heated until the concentration in the gas phase is in equilibrium glass with the concentration in the liquid phase. A sample from the headspace is then analyzed. • Strain point : 565°C Our headspace vials are according to manufacturersʼ guidelines. • 6, 10 and 20mL headspace vials are available with flat bottom or rounded bottom Ordering Information - Headspace Vials & Caps (Agilent™ Compatible Parts, TechComp (Formerly Bruker/Varian), Tekmar PART NO. (100pk) DESCRIPTION Agilent™ Compatible Part V06020-2338X 6mL Headspace Crimp Vial, 23 x 38m, 20mm 5182-0876 VX0020-2346X 10mL Headspace Crimp Vial, 23 x 46mm, 20mm 5182-0838 5182-0837 VXX020-2375X 20mL Headspace Crimp Vial, 23 x 75mm, 20mm 5183-4479 Pre-assembled 20mm Headspace Cap and Septa 5183-4480 CHR-0030 20mm Aluminum Crimp Cap with Pharmafix Septa - 5183-4478 CHR-0031 20mm Aluminum Pressure Release Crimp Cap with Pharmafix Septa 5183-4477 CLS-9508 20mm Aluminum Crimp Cap with Transparent Blue Septa CLS-9980 20mm Safety Seal Crimp Cap, 3mm Tan Teflon/White Silicone Septa CLS-9981 20mm Silver Crimp Cap, 3mm Tan Teflon/White Slicone Septa *For Tekmar (7000HT) and TechComp (formerly Bruker/Varian) CLS-0030 CLS-9980 For CLS-9508 crimpers and decappers see page 24 V06020-2338X VXX020-2375XP VX0020-2346X CLS-1414 VX0018-2346S CLS-1309 CLS-1416 Ordering Information­Screw VXX018-2375S Headspace Vials & Caps CTC/ Leap Technologies PART NO. (100pk) DESCRIPTION VX0018-2346CTC 10mL Clear Headspace Glass Screw Vial, 23 x 46mm, 18-425 VXX018-2375CTC 20mL Clear Headspace Glass Screw Vial, 23 x 75mm, 18-425 Pre-assembled 18mm Magnetic Headspace Screw Cap and Septa CHR-1309 18mm Silver Screw cap, Silicone Blue Transparent/PTFE White CHR-1414 18mm Silver Screw cap, PTFE White/Silicone Blue CHR-1416 18mm Silver Screw cap, Butyl Red/PTFE Grey [email protected] :: www.chrom4.com 25

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Headspace Vials Ordering Information - Crimp Headspace Vials & Caps CTC/Leap Technologies PART NO. (100pk) DESCRIPTION VX0020B-2346X 10mL Clear Headspace Glass Crimp Vial, Rounded Bottom, 23 x 46mm VXX020B-2375X 20mL Clear Headspace Crimp Vial, Round Bottom, 23 x 75mm, 20mm Pre-assembled 20mm Magnetic Headspace Crimp Cap and Septa CLS-1535B 20mm Blue BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536G 20mm Green BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536GO 20mm Gold BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1535R 20mm Red BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536S 20mm Silver BiMetal Magnetic Crimp Cap, 3mm Tan Teflon/Sil CLS-1536GO CLS-1535B CLS-1536G VX0020B-2346X VXX020B-2375X CLS-1535R CLS-1536S Ordering Information - Crimp Headspace Vials & Caps Perkin Elmer PART NO. (100pk) DESCRIPTION VX0020PE-2346 10mL Headspace Crimp Vial, 23 x 46mm, 20mm VXX020PE-2375 20mL Headspace Crimp Vial, 23 x 75mm, 20mm Pre-assembled 20mm Headspace Cap and Septa CHR-0031 20mm Aluminum Pressure Release Crimp Cap with Pharmafix Septa CLS-9980 20mm Aluminum Pressure Release Crimp Cap, 3mm Tan Teflon/White Sil. Septa CLS-9981 20mm Silver Crimp Cap, 3mm Tan Teflon/White Slicone Septa VXX020PE-2375 26 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats High Recovery Vials High Recovery Vial The High Recovery Vial has a precision formed limited volume •Solid glass base offers better heat sink for insert style conical well, with less than 2µL dead volume in the concentrating samples center of a solid glass bottom. This allows an autosampler to recover virtually the total sample and eliminates the need for •Screw top, crimp top and snap cap vials available limited volume inserts, supports and springs. •Deactivated version available. Ideal for working with protein, DNA and RNA •Precision Limited volume injections with less than 2µL dead volume •Large opening Eliminates bent needle problem associated with limited volume inserts •Vortexing Ideal for vortexing limited volume samples •Volume 2mL and 4mL available •Concentrate samples in the same vial that you will use in the autosampler Ordering Information - High Recovery Vial 12 x 32mm, wide mouth, 2mL PART NO. (100pk) DESCRIPTION CHR05100CR 2mL High Recovery Crimp Top Vial CHR05100SN 2mL High Recovery Snap Top Vial CHR05100SC 2mL High Recovery Wide Mouth Screw Top Vial High Recovery Vials For caps see page 4, 6 and 8. CHR05100CR CHR05100SC CHR05100SN Ordering Information - InSert Vial Glass wide mouth 12 x 32mm, with fused-in 300µL capacity insert PART NO. (100pk) DESCRIPTION VB311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert, Fused Bottom VB311-1232 2mL Clear Crimp/Snap Ring Vial, Fused in 300µL insert, Fused Bottom VB309-1232 2mL Clear Wide Mouth Screw Vial, Fused in 300µL insert, Fused Bottom VG311C-1232 2mL Clear Crimp Vial, Fused in 300µL insert, Fused Top, for GC applications VG311-1232 2mL Clear Crimp/Snap Ring Vial, Fused in 300µL insert, Fused Top, for GC applications VG309-1232 2mL Clear Wide Mouth Screw Vial, Fused in 300µL insert, Fused Top, for GC applications NEW [email protected] :: www.chrom4.com 27

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Microplates - Cap Mats 96-Well EVA Sealing Mats Ordering Information PART NO. DESCRIPTION QUANTITY PV-219004 EVA Sealing Mat to fit 96-square Well Plates 50 PV-219019 EVA Sealing Mat to fit 96-square Well Plates, sterile 50 PV-219036 EVA Sealing Mat for 96-round Well Plates 50 PV-219038 EVA Sealing Mat for 96-round Well Plates, black 50 PV-219042 EVA Sealing Mat for 96-round Well Plates, sterile 50 96-Well Cap Mats Ordering Information PART NO. DESCRIPTION QUANTITY IS07-9605 96 Well Cap Mat, Round, 100% Silicone, PTFE Coating each IS07-9611 96 Well Cap Mat, Square, 100% Silicone, PTFE Coating each IS07-9612 96 Well Cap Mat, Square, 100% Silicone, PTFE Coating with Slit each IS07-9614 96 Well Cap Mat, Round, 100% Silicone, PTFE Coating with Slit each IS07-9616 96 Well Cap Mat, Square, Wider plug, 100% Silicone, PTFE Coating each IS07-9620 96 Well Clear, Ultra Thin Round Well, Soft Silicone, PTFE Coating with Slit each IS07-9605 IS07-9611 IS07-9614 IS07-9616 IS07-9614 96-Well Assay Conical 96-Well 2mL Filter Plate Bottom Plate Ordering Information Ordering Information Direct replacement for Agilent® Compatible 96 Well Plate, 0.5mL PART NO. DESCRIPTION Agilent™ PART NO. DESCRIPTION QTY QTY Compatible FV-931919 96 Well 2mL Filter Plate 25 FV-9356045 96 Well Assay Conical 25M Long drip Bottom Plate 420­ul Part 50 5042-1385 28 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats 96-Well Storage and Collection Plates 96-Well, Deep, Square (47mm height) • Made from virgin polypropylene • Tested for low extractables • Tight specification levels • V bottom to allow total liquid removal, partial collection and to aid re-suspension • No inner edges to allow better collection of magnetic beads • Manufactured under DNase/ RNase free environment • Working volumes of 350µL, 1mL and 2mL • Raised well rims to improve heat sealing • Conical base which aids sample concentration, reconstitution and centrifugation • Sterile and non-sterile versions available The family of 96 square well plates was designed so that it would make the interchange of plates simpler in automated systems. All three plates have the same geometry and the only variable is the well depth. 96-Well, Shallow, 29 Round (14.7mm height) • Manufactured in polypropylene • Alphanumeric grid reference • High rigidity allows for centrifugation • Round and V-bottom allow greater liquid removal and particulate collection • Raised rims improve sealing and stop cross contamination Porvair Sciences offers three plates with well capacities of 350µL, 300µL and 240µL. They have flat, round or V bottoms and can be used for compound storage, screening and cultur- ing. [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats 96-Well Storage and Collection Plates 96-Well, Deep, Round (42mm height) • Manufactured from pre-tested polypropylene for low extractables • Alphanumeric grid-referencing • DNase/ RNase free • Packed in sealed sleeves of 5 plates • Rimmed version to stop cross contamination and enable a better seal • Non rimmed version to allow insertion of vials, or where the seal is not crucial • Cylindrical well with round bottom for optimal mixing and recovery • Very easy to use with automated sample handling systems • Can be stored at -80ºC The plates are manufactured in polypropylene to minimize extractables. Working volume is 1mL per well and total volume is 1.1mL. Coloured plates aid identification when retrieving from storage. Black plates are suitable for storing light sensitive compounds. Ordering Information - 96-Well Plates PART NO. DESCRIPTION QTY 96-Well, Deep, Square PV-219006 96 Deep Well, 350µL, PP, Square 50 96 Deep Well, 350µL, Sterile PP, Square 50 PV-219025 96 Deep Well, 1mL, PP, Square 50 96 Deep Well, 1mL, Sterile PP, Square 50 PV-219008-50 96 Deep Well, 2mL, PP, Square 50 96 Deep Well, 2mL, Sterile PP, Square 50 PV-219026 96 Shallow Well, 350µL, PP, Flat Bottom, Rimless 100 PV-219009-50 96 Shallow Well, 300µL, PP, Round Bottom, Raised Rim 100 96 Shallow Well, 150µL, PP, V Bottom, Raised Rim 100 PV-219027 96-Well, Shallow Round 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Natural 50 PV-208003 96 Deep Well, 1mL, Sterile PP, Round Bottom, Raised Rim, Natural 50 96 Deep Well, 1mL, PP, Round Bottom, Rimless, Natural 50 PV-209003 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Blue 50 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Red 50 PV-210003 96 Deep Well, 1mL, PP, Round Bottom, Raised Rim, Black 50 96-Well, Deep Round PV-219002 PV-219012 PV-219037 PV-219432 PV-219422 PV-219412 30 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats 96-Well, Round, Low Profile Microplates • Allows stacking in higher densities given space. • Minimizes space needed for compound The plates are made with extractable- free polypropylene for excellent results. storage • Pure virgin polypropylene A specific anti-evaporation cap mat is • Matching snug-fitting cap mat also available for this plate manufac- tured from thermoplastic elastomer. A new introduction to the Porvair range is a low profile 1.1mL 96-well round plate with a height of just 27mm. This allows more plates to be stored or stacked in a Riplate® - Deep Well Plate Riplate® 1mL Riplate® 1mL is a registered trademark of Ritter, which has received a high confidence level by our customers, as • In polypropylene or polystyrene, Riplate® 1mL can Riplate® 1mL is the ideally compatible plate for many applica- be used for high-throughput screening, combinatori- tions, as well in its chemical or physical characteristics. al chemistry, storage and preparation of essays etc. Riplate® 1mL-96-well-systems are in accordance with the • Riplate® 1mL is suitable for extreme temperature SBS standard*and are suitable for all automation systems conditions like freezing or defrosting in the micro- with the corresponding closing/sealing mechanism and for all wave. 8- and 12-canal-pipettes. The classic formats Riplate® 1mL PP and PS are completed by the new format Riplate® 1mL • U-shaped well bottom reduces the death-volume. Plus. • Due to the high chemical resistance riplate® 1ml is ideal for sensitive diagnostic applications. Riplate® 1mL is also in bioclean® (sterile) available. Riplate® 1mL Plus Riplate® 1mL medio are suited for screening, mixing and centrifugation of samples, as well as for the storage and • Raised wells reduce the risk of crosscontamination preparation of substances. Through the compact construction and increase the security of hot sealing or sealing Riplate® medio are stackable and through the low height you with adhesive foils. An improved footprint according need approx. 50% storage capacity. to the SBS-standard and eight ventilation holes make Riplate® 1mL Plus the ideal format for use in a thermo- *Society for Biomolecular Screening cycler or for defrosting of samples in a hot-water bath. • Very high chemical resistance for chem cal agents and aggressive solutions • High rigidity during centrifugation • New developed conical well permit a good bioturbation • Small rims around the wells avoid cross contamination Riplate® Deep Well Plate Now also available in 2mL round Ordering Information PART NO. DESCRIPTION QTY 96-Well, Round, Low Profile 50 100 PV-219250 96 Well, Low Profile, 1.1mL per well, 27mm high Storage Plate 20 PV-219251 Thermoplastic Elastomer Cap Mat to fit PV-219250 20 20 Riplate® Deep Well Plate RP96WUB-1ML 1mL PP Round Well Plate, Round Bottom RP96RWUB-1ML 1mL PP Round Raised Well Plate, Round Bottom RP96WUB-2ML 2mL PP Round Well Plate, Round Bottom See page 28 for cap mats [email protected] :: www.chrom4.com 31

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Vial Selection Criteria small opening Crimp Neck 11mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm VT011L-1232 VT011LM-1232 VT11LM-1232A V1111-1232 CHR05100CR VT011-1232 VB311MC-1232 VT311MC-1232 Snap Ring 11mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm VT011S-1232 VT011SM-1232 VT11SM-1232A VT311P-1232* V0300P-1232 VB311M-1232 Short Thread 9mm NEW for Ion Chromatography 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm VT009-1232 VT009M-1232 VT009M-1232A VB309M-1232 VTV300195M9P-1-1223322 V0309P-1232 CHR05100SC VB309M-1232A Screw Neck 8mm, small opening Screw Neck 10mm, wide opening 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm 32 x 11.6mm VT008-1232 * VT008A-1232 * VT008M-1232 VT008M-1232A V1108-1232 VT010-1232 VT010M-1232 VT010M-1232A * Please inquire 32 [email protected] :: www.chrom4.com

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Micro-Inserts for wide opening Vial Selection Criteria Micro-Inserts for small opening 31 x 6mm 31 x 6mm 29 x 5.7mm 31 x 6mm 31 x 6mm 31 x 5mm 31 x 5mm 31 x 5mm 27.5 x 4mm 29 x 5mm I025CP-631 I025TP-631 I025BS-629 I025-630 I025GF-631 I01-531 I025-629 I025-530 I015TP-428 I025BS-529 CHR0357 CHR0669 CHR0865 CHR0866 CHR0129 CHR0269 CHR1240 CHR0279 CHR0968 Screw Neck 13mm Waters Shell Vials, 1ml (Insert) 45 x 14.7mm 45 x 14.7mm 40 x 6mm 43.45 x 6mm 40 x 8.2mm 40 x 8.2mm 34 x 5mm VF013-1545 VF013-1545A CHR0146 I045-4306 V800-840QC V800-840AQ CHR0651 Crimp Neck 8mm 31.5 x 5.5mm 31.5 x 5.5mm 30 x 8.2mm 30 x 8.2mm 40 x 8.2mm 40 x 8.2mm 40 x 7mm 40 x 7mm 40 x 7mm 30 x 7mm V0308-632 V0606-632 V0808-830 V0808A-830 V0808-840 V0808A-840 V0708-840 VV00770088--784400 VV00770088-8-74400AA V0608-840A Headspace 20mm Crimp 46 x 22.5mm 46 x 22.5mm 75.5 x 22.5mm 75.5 x 22.5mm 75.5 x 22.5mm 46 x 22.5mm 75.5 x 23mm VX0020B-2346X VX0020-2346X VXX020-2375X VXX020B-2375X VXX020SPME-2375 VX0020BS-2346X VXX020BS-2375X VX0020BA-2346X VXX020BA-2375X [email protected] :: www.chrom4.com 33

Sample Handling - Vials, Caps, Inserts, 96 Well Plates, Sealing Mats Vial Selection Criteria Mentioned trademarks are registered trademarks of their respective owners. No license or immunity under any patent is granted or implied by our sale of any material. Chrom4 is not affiliated with any of the following companies listed, or their products. Products listed under the following companies are compatible with their instrumentation. Agilent, Beckman, Bruker, CTC/Leap, Perkin Elmer, Shimadzu, Waters. Chrom4 is not an authorized seller of AGILENT branded parts and does not sell genuine AGILENT parts. Chrom4 only offers parts compatible with Agilent products. 34 [email protected] :: www.chrom4.com

Sample Preparation Filtration Filter Membrane Compatibility Chart Filter Membrane Chemical Compatibility Chart Filter Membrane Chemical Compatibility Chart Nylon PTFE PVDF Regenerated Cellulose Nylon PTFE PVDF Regenerated Cellulose Chemical Chemical Acids LCCC Ketones CCNC LCCC CCNC Acetic, 25% NCCC Acetone C C N— Acetic, Glacial LCCC Cyclohexanone CC LC Formic, 25% NNCC Isopropylacetone CCNC Hydrochloric, 25% NCCC Methyl Ethyl Ketone Hydrochloric, Concentrated NC L L Methyl Isobutyl Ketone (MIBK) L L LC Sulfuric, 25% NC LC Esters CCCC Sulfuric, Concentrated NC LN 2-Ethoxyethyl Acetate C C—C Nitric, 25% NCCC Amyl Acetate CCCC Nitric, Concentrated LCCC Benzyl Benzoate CCCC Phosphoric, 25% Butyl Acetate C C—C Trichloroacetic, 10% CC L— Ethyl Acetate LCLC Bases C C C— Isopropyl Myristate LNCC Ammonium Hydroxide, 25% Methyl Acetate L C—C Sodium Hydroxide, 3 Normal CCCC Propyl Acetate CCCC Alcohols CCCC Propylene Glycol Acetate —C—C Amyl Alcohol CCCC Methyl Cellosolve Acetate Benzyl Alcohol CCCC Tricresyl Phosphate CCCC Butyl Alcohol CCCC Oxides — Ethers LCCC Ethanol, 70% CCCC Acetonitrile (Methyl Cyanide) CCCC Ethanol, 98% CCCC Aniline CCN L Ethylene Glycol CCCC Diethyl Acetamide LCC L Glycerine (Glycerol) CCCC Dimethyl Formamide CC L L Isopropanol CCCC Dimethyl Sulfoxide (DMSO) CCCC Methanol, 98% CCCC Dioxane C C N— n-Propanol Ethyl Ether CC LC Propylene Glycol CCCC Isopropyl Ether Hydrocarbons CCCC Pyridine CC L L Benzene CCCC Solvents with Nitrogen CCCC Hexane, Xylene C C C— Tetrahydrofuran Kerosene, Gasoline CCCC Triethanolamine CCC L Tetralin, Decalin Miscellaneous NCCC Toluene CCCC Formaldehyde Solution, 30% NC LC Halogenated Hydrocarbons CCCC Hydrogen Peroxide, 30% CCCC Carbon Tetrachloride LCCC Phenol, Aqueous, 10% Chlorobenzene (Mono) CCCC Silicone Oil and Mineral Oil Chloroform LCCC Freon CCCC Methylene Chloride CCCC Trichloroethane Trichloroethylene LEGEND - C=Compatible, L=Limited Compatibility, N=Not Compatible, =No Data Available, PTFE=Teflon®, PVDF=Polyvinyledene Difloride [email protected] :: www.chrom4.com 35

Sample Preparation Syringe and Membrane Filters 36 [email protected] :: www.chrom4.com

Sample Preparation Syringe and Membrane Filters InnoSep™ CHROM4 Offers Affordable, Quality Syringe Filters Housing Membrane Polypropylene housings are highly solvent resistant and The cellulose acetate and polysulfone membranes are all low exhibit low extractables. They are ideal for filtering samples or protein binding, which makes them well suited for filtration of solvents used in chromatography. biological samples. PTFE membrane in a PP housing can be used to filter sol- Size vents and strong acids. Although PTFE is inherently hydrophobic, it can be made 4mm syringe filters are useful for filtration up to 1mL of low hydrophilic by pre-wetting the membrane with methanol and particulate level chromatography of biological samples. then rinsing with water. 17mm syringe filters have a filtration area of 1.3cm2 and a Nylon or polypropylene are ideal for filtration of chromatogra- hold-up volume of less than 30uL with an air purge. phy samples. Ideal for samples up to 12mL. Polypropylene membranes exhibit near zero extractables, are 30mm syringe filters have a filtration area of 4.9cm2 and offer very resistant to solvents and most chemicals and would be the fastest sample filtration. the first choice for filtration of chromatography samples. Next to our excellent InnoSep™ line, we also carry a complete transfer membrane line. Material Description Features Application Pore Size CA Internally supported • Lowest binding material available • Tissue culture media sterilization 0.22 - 5.0 cellulose acetate • Highest throughput • Protein & enzyme filtration sterilization Glass Fiber • Strength and dimension stability • Biological fluid filtration, sterilization NC Glass fiber prefilters • Uniform pore structure • Tissue culture media sterilization • Hydrophilic Nylon Unsupported • Biologically inert • Gravimetric analysis 0.5, 0.7, 1.0 PP nitrocellulose mixed • Available with or without acrylic binders • Prefilter to extend final filter life PES cellulose esters • High dirt-holding capacity • Clarification of particulate laden solutions PVDF • Consistent flow rates • Aqueous filtration 0.1 - 8.0 PTFE • High throughputs • Microbiological analysis 0.1 - 20.0 • Uniform pore structure • Sterility testing • Hydrophilic • Gravimetric analysis with ashing technique • Particulate analysis Internally supported nylon • Naturally hydrophilic • Sterilization, clarification of aqueous • Wide chemical compatibility range and organic solvent solutions • Extremely low extractables • LC sample preparation • Strength and dimensional stability Polypropylene • Chemically and biologically inert • Sterilization, clarification of 0.1, 0.22, 0.45 • Wide chemical compatibility range organic solvent solutions 0.22 - 5.0 • Extremely low extractables • LC sample preparation • Tissue culture media sterilization Polyethersulfone • Low protein binding • Protein and enzyme filtration, sterilization • Low extractables • Biological fluid filtration, sterilization • Autoclavable • Ion chromatography • Wide chemical compatibility range • Strength and dimensional stability Polyvinylidene difluoride • Hydrophobic • Filtration of polar and non-polar solutions 0.2 - 0.45 • Chemically inert towards many solvents, similar stability to PTFE Polytetrafluoroethylene • Naturally hydrophilic • Filtration of strong acids 0.22, 0.45, 1.0 (Teflon laminated onto a • Compatible with strong acids and aggressive solvents polypropylene support) • Venting applications and aggressive solvents • Improved durability and handling See page 35 for Filter Membrane Compatibility Chart [email protected] :: www.chrom4.com 37

Sample Preparation InnoSep™ SF25 N Membrane Materials: Cellulose Acetate, Nylon, PES, PTFE, PVDF Membrane Diameter: 25 mm Effective Filtration Area: 4.6 cm² Housing Diameter: 33 mm Housing Materials: Polypropylene Inlet / Outlet: FLL / MLL-MLS Holdup Volume: <100 microliter Sample Volume: <120 mL Maximum Operating Temperature: PP - 90°C/194°F Maximum Operating Pressure: 80 psi Sterile: No Anti-burst ring: No SF6054-06N SF6055-06N SF6058-06N SF6057-06N SF5511-06N SF5510-06N SF5509-06N SF5508-06N Part Number Qty Description SF5511-06N 100 25 mm PVDF 0.45 µm SF5510-06N 100 25 mm PVDF 0.2 µm SF6058-06N 100 25 mm PTFE 0.45 µm SF6057-06N 100 25 mm PTFE 0.2 µm SF6054-06N 100 25 mm Nylon 0.45 µm SF6055-06N 100 25 mm Nylon 0.2 µm SF5509-06N 100 25 mm PES 0.45 µm SF5508-06N 100 25 mm PES 0.2 µm SF5003-06N 100 SF5112-06N 100 25 mm CA 0.2 µm 25 mm CA 0.45µm Chrom4 Syringe Filters are available in a select number of filter media, diameters and pore sizes. Please contact us for ordering information on items not shown. 38 [email protected] :: www.chrom4.com

Sample Preparation InnoSep™ SF13 Membrane Materials: Nylon, PTFE, PVDF Membrane Diameter: 13 mm Effective Filtration Area: 0.65 cm² Housing Diameter: 13 mm Housing Materials: Polypropylene Inlet / Outlet: FLL-MLS Sample Volume: < 10 mL Maximum Operating Pressure: 85 psi Sterile: No Anti-burst ring: Yes CNY6502 CNY6503 CPT6500 CPT6505 CPV6501 CPV6504 Part Number Qty Description CNY6502 100 13mm Nylon 0.2 µm CNY6503 100 13mm Nylon 0.45 µm CPT6500 100 13mm PTFE 0.2 µm CPT6505 100 13mm PTFE 0.45 µm CPV6501 100 13mm PVDF 0.2 µm CPV6504 100 13mm PVDF 0.45 µm Chrom4 Syringe Filters are available in a select number of filter media, diameters and pore sizes. Please contact us for ordering information on items not shown. [email protected] :: www.chrom4.com 39

Sample Preparation Membrane Filters Chrom4 Membrane Filters Nylon Polyvinylidene Difluoride •• WNaidtueraclhlyemhyicdarol pchoimlicpatibility range, (PVDF) organic solvent resistance (except acids and bases) • Hydrophobic • Internally supported • Suitable for filtration of polar • Strength and dimensional stability and non-polar solutions • • Chemically inert towards many • High binding capacity, high dirt loading capacity solvents, similar stability to PTFE Available in gridded and 1+ PK for testing Polytetrafluoroethylene (PTFE) • Naturally hydrophilic • Compatible with strong acids • aImnpdraogvegdredsusirvaebisliotylvaenndtshandling Ordering Information Pre Cut Size (mm) 25 47 90 Qty Per package 100 100 25 Nylon 0.2µm SFNY202500 SFNY204700 SFNY209025 PTFE 0.45µm SFNY502500 SFNY504700 SFNY509025 PVDF 0.2µm SFPT202500 SFPT204700 SFPT209025 0.45µm SFPT502500 SFPT504700 SFPT509025 0.2µm SFPV202500 SFPV204700 SFPV209025 0.45µm SFPV502500 SFPV504700 SFPV509025 40 [email protected] :: www.chrom4.com

Sample Preparation Separa Syringeless Filter Vials Save time with your sample prep process with SEPARA® filters and vials disposable device. Easy to press, fast and simple to use. Features & Benefits Rapid single step sample preparation Reduce sample loss. Ready to go for HPLC or UHPLC auto-sampler Compatible with most standard auto-samplers The pre-slit cap ensures easy and clean transfer of sample. Specifications Dimensions: 12mm I.D x 33mm height Material: Polypropylene vial, Cap Septa, PTFE/silicone Fill line volume: 0.48mL Filtering capacity: 0.45mL Dead volume: 30uL The force needed to compress the unit is estimated at 8 psi (0.6 bar) Maximum operating temperature: 120° F (50° C) Available with 5 different membranes, 0.45 µm & 0.22 µm: PTFE RC PES PVDF NY •  Filtration of strong acids •  Filtration of Aqueous • Biological Studies • Biological Studies •  Clarification of aqueous • ICP Sample Preparation •  Clarification Studies and aggressive solutions and Organic Solutions • Dissolution Testing and organic solvent •  Drug Metabolite Studies •  Analytical Sample Prep, (wine industry) solutions • Dissolution Testing (Protein PPT) uHPLC • HPLC sample preparation •  Clarification of aqueous • Chromatography • Chromatography and organic solvent solutions • Clarification • HPLC sample preparation • Protein Chemistry • Chromatography Ordering Information: Item No. Description Membrane Pore Size UOM (µm) FVNY020 Filter Vials, Snap Caps, Light Blue, pre-slit PTFE/Silicone Septa Nylon (NY) Hydrophilic 0.2 \\100 FVNY045 Filter Vials, Snap Caps, Dark Blue, pre-slit PTFE/Silicone Septa Nylon (NY) Hydrophilic 0.45 \\100 FVPES020 Filter Vials, Snap Caps, Light Green, pre-slit PTFE/Silicone Septa Polyethersulfone (PES) Hydrophilic 0.2 \\100 FVPES045 Filter Vials, Snap Caps, Dark Green, pre-slit PTFE/Silicone Septa Polyethersulfone (PES) Hydrophilic 0.45 \\100 FVPVDF020 Polyvinylidene Difluoride (PVDF) Hydrophilic 0.2 \\100 FVPVDF045 Filter Vials, Snap Caps, Yellow, pre-slit PTFE/Silicone Septa Polyvinylidene Difluoride (PVDF) Hydrophilic 0.45 \\100 FVPTFE020 Filter Vials, Snap Caps, Orange, pre-slit PTFE/Silicone Septa Polytetrafluoroethylene (PTFE) Hydrophobic 0.2 \\100 FVPTFE045 Polytetrafluoroethylene (PTFE) Hydrophobic 0.45 \\100 FVRC020 Filter Vials, Snap Caps, Pink, pre-slit PTFE/Silicone Septa Regenerated Cellulose (RC) Hydrophilic 0.2 \\100 FVRC045 Filter Vials, Snap Caps, Red, pre-slit PTFE/Silicone Septa Regenerated Cellulose (RC) Hydrophilic 0.45 \\100 Filter Vials, Snap Caps, Gray, pre-slit PTFE/Silicone Septa Filter Vials, Snap Caps, Black, pre-slit PTFE/Silicone Septa [email protected] :: www.chrom4.com 41

Sample Preparation IRIS™ Polymeric SPE Sorbents IRIS™ sorbents are available in six different phase chemistries offering maximum flexibility for method development. Low pKa Phase IRIS PLUS IRIS N 100% Divinylbenzene RP phase Polyamide phase - HLB* type sorbent SurfacPeoraeresaiz:e~: 78000Åm2/g SurfacPeoraeresaiz:e~: 58000Åm2/g * Localized hydrophilic/lipophilic base IRIS WCX • Available in 25-35 µm IRIS WAX Organic acid on DVB phase • Available in various Secondary amine on DVB phase Pore size: 80 Å cartridge sizes Pore size: 80 Å Ion-Exchange capacity: ~1 meq/g and 96-well plate formats Ion-Exchange capacity: ~1 meq/g pKa ~5 pKa ~7 IRIS MCX IRIS MAX Sulfonated hydrophilic Quaternary amine phase on DVB phase on DVB phase Pore size: 80 Å Pore size: 80 Å Ion-Exchange capacity: ~1 meq/g Ion-Exchange capacity: ~0.1 meg/g pKa <1 pKa >18 High pKa Phase Advantages of Polymeric Solid Phase Extraction 1. Excellent recovery - highly retentive nature of polymeric phases 2.  High surface area that results in higher analyte capacity compared to silica based SPE 3. Reduced resin volumes for improved detection limits and reduced drying time 4. Inert to a wide array of solvents and pH ranges 5. Absence of leachables 6. Absence of residual silanol groups 7. Resistant to dewetting 42 [email protected] :: www.chrom4.com

Sample Preparation IRIS™ General Method Guidelines Sorbent Analyte Properties Matrix/Sample Retention Elution MIXED-MODE CATION-EXCHANGE IRIS MCX Charged/Ionized compounds Aqueous – diluted Higher % of aqueous Lower % of aqueous IRIS WCX with buffer solvent (water) solvent (water)  • Cation-exchange (basic) analytes Example: Lower % of organic solvent Higher % of organic solvent Biological fluids • Non-polar to moderately Lower ionic strength Higher ionic strength polar hydrophobic with buffer pH < pKa of analyte pH > pKa of analyte • Neutral pH > pKa of sorbent pH < pKa of sorbent MIXED-MODE ANION-EXCHANGE IRIS MAX Charged/Ionized compounds Aqueous – diluted Higher % of aqueous Lower % of aqueous IRIS WAX with buffer solvent (water) solvent (water) • Anion-exchange (acidic) analytes Example: Lower % of organic solvent Higher % of organic solvent Biological fluids Lower ionic strength Higher ionic strength • Non-polar to moderately polar hydrophobic with buffer pH > pKa of analyte pH < pKa of analyte pH < pKa of sorbent pH > pKa of sorbent • Neutral REVERSED-PHASE IRIS PLUS • Non-polar to moderately Aqueous – diluted with buffer Higher % of aqueous Lower % of aqueous IRIS N polar hydrophobic solvent (water) solvent (water) Example: • Neutral Biological fluids, water Lower % of organic solvent Higher % of organic solvent Example: pH adjusted buffer to place pH adjusted buffer to place Pharmaceuticals, analyte in neutral form analyte in charged form pesticides, herbicides, (if applicable) (if applicable) Alkaloids NORMAL-PHASE IRIS N • Moderate to highly polar Non-polar to moderately Higher % of organic solvent Lower % of organic solvent • Neutral polar organic Lower % of aqueous solvent Higher % of water Example: Example: (water) Pesticides Biological fluids, oil, fats pH adjusted buffer to place pH adjusted buffer to place analyte in neutral form analyte in neutral form (if applicable) (if applicable) This table provides general method guidelines. Each IRIS polymeric SPE box contains detailed instructions for each specific phase. [email protected] :: www.chrom4.com 43

Sample Preparation IRIS™ Sorbent Selection Guidelines Analyte NO IRIS MCX Properties page #50 Strong Base? YES IRIS WCX page #52 STRONG IRIS PLUS *Acid, Retention page #46 Neutral, of or *Base? IRIS N Neutrals? BALANCED page #48 Strong YES IRIS WAX Acid? page #56 * If analytes contain both acids and bases, select the dominant interaction. NO IRIS MAX page #54 Sample Type and Sorbent Mass Guidelines Industry Typical Example Typical Recommended Recommended Sample Sorbent Reservoir Volume Mass 6 mL Environmental Drinking water, 0.1 L to 1 L 200 mg 3 mL Food & Agriculture Surface water, 1 mL to 3 mL 60 mg Clinical & Bioanalysis Waste water, Soil 0.4 mL to 3 mL 30 mg 1 mL Food homogenate from Fish, Fruit, Meat, Poultry, Wheat Blood, Plasma, Urine diluted IRIS Sorbent Minimum Recommended Typical Elution Mass Elution Volume Volume 500 mg 5 mL 10 mL to 25 mL 200 mg 2 mL 3 mL to 10 mL 60 mg 600 µL 1.2 mL to 3 mL 30 mg 300 µL 0.6 mL to 2 mL 10 mg 100 µL 0.3 mL to 1 mL * Elution volumes depend on the chemical nature of the analyte, its relative concentration in the matrix, the chemistry of the solution solvent and the sorbent bed mass. Please be advised that the tables above provide general guidelines. Please contact our technical support team for specific method development support or guidelines for specific applications. 44 [email protected] :: www.chrom4.com

Sample Preparation IRIS SPE Sample Extraction Products cartridges (syringe barrel & frits) • Virgin polypropylene solid phase extraction cartridges with frits • Available in format ranging from 1 mL to 6 mL 96-well plates (deep well plate format) • High throughput SBS format plates compatible with most automated systems • Available with 10 mg, 30 mg and 60 mg bed mass online columns & guard cartridges • Design for online solid phase extraction using a switching valve • Wide choice of column configuration • Online guard columns are available in 10x2.1 mm & 10x4.6 mm packed with 5 µm of any of the six phase chemistries (please inquire) innosep vacuum manifolds 45 • InnoSep Vacuum manifolds for SPE sample preparation, filtration, and elution are available in 12, 16, and 24 port configurations. • These manifolds permit consistent extraction and filtration results. Multiple sample processing with these manifolds simplifies procedures and saves time. The manifolds consist of a clear glass chamber and lid to which a vacuum is applied to draw a sample through an SPE column, cartridge, or disk. • Adjustable racks placed in the glass vacuum chamber will accommodate a variety of sample collection vessels, including test tubes, autosampler vials, volumetric flasks, and Erlenmeyer flasks. Eluents are deposited directly into the collection vessel of choice via polypropylene, optional stainless steel, or Teflon needles. [email protected] :: www.chrom4.com

Sample Preparation PLUS iris plus • 100% Divinylbenzene (DVB) phase • Pore Size: 80 Å • Surface area: ~700 m2/g • Available in 25-35 µm particle size • Available in various cartridge sizes and 96-well plate formats The IRIS PLUS is a 100% DVB phase. This unique polymer phase is our most retentive reversed-phase sorbent. It is a great replacement for your current C18 or PS-DVB SPE sorbents. IRIS PLUS SPE Cartridges Part No. Description Particle Size Qty (Box) IR34460 IRIS PLUS 10mg/1mL 25-35µm 100 IR34461 IRIS PLUS 30mg/1mL 25-35µm 100 IR34462 IRIS PLUS 30mg/3mL 25-35µm 100 IR34446 IRIS PLUS 60mg/3mL 25-35µm 100 IR34264 IRIS PLUS 100mg/3mL 25-35µm 100 IR34445 IRIS PLUS 200mg/6mL 25-35µm 30 IR34266 IRIS PLUS 500mg/6mL 25-35µm 30 Part No. IRIS PLUS SPE 96-well Plates IR96341 Description Particle Size Qty (Box) IR96343 IR96345 IRIS PLUS 96-well 10mg/1mL 25-35µm 1 IR96347 IRIS PLUS 96-well 30mg/1mL 25-35µm 1 IR96348 IRIS PLUS 96-well 60mg/1mL 25-35µm 1 IRIS PLUS 96-well 30mg/2mL 25-35µm 1 IRIS PLUS 96-well 60mg/2mL 25-35µm 1 46 [email protected] :: www.chrom4.com

Sample Preparation iris plus Features & Benefits • Higher Recoveries – due to the highly retentive nature of the DVB packing material • Lower Background Signals – proprietary cleaning process for ultrapure resins decreasing background signals • Durability – stability at pH extremes of 0-14 • Improved Detection Limits and Reduced Drying Time – using reduced resin volumes • Eliminate Matrix Effects – cleaner sample extracts reduce or eliminate matrix ion suppression • IRIS PLUS – most hydrophobic reversed-phase available • Excellent for environmental samples IRIS PLUS APPLICATION Sorbent: IRIS PLUS - 200 mg/6mL Polycyclic aromatic Part Number: IR34445 hydrocarbons - PAH Solution Conc: 10 µg/mL in H2O Recovery Rates: Benzo(b)Fluoranthene Benzo(j)Fluoranthene Chrysene Benzo(k)Fluoranthene Benzo(a) Anthracene 106.5% 104.8% Benzo(a)pyrene Indeno(1,2,3-cd)pyrene Group 2 Group 4 Benzo(e)pyrene Benzo(g,h,i)perylene Group 1 Group 3 Dibenz(a,h)anthracene 106.5% 98.7% Figure 1: GCMS Chromatogram 47 [email protected] :: www.chrom4.com

Sample Preparation N iris n O R1 • Polyamide phase - HLB type sorbent N • Pore size: 80 Å R2 • Surface area: ~500 m2/g R3 • Available in 25-35 µm particle size • Available in various cartridge sizes and 96-well plate formats This novel polyamide polymer phase provides a highly hydrophilic/lipophilic balance making it the SPE material with the widest applicability. The outstanding reversed-phase characteristics of this material are only one part of this material’s success. This phase chemistry offers multiple interaction mechanisms and can be used for both reversed- phase and normal-phase applications. IRIS N SPE Cartridges Part No. Description Particle Size Qty (Box) IR44460 IRIS N 10mg/1mL 25-35µm 100 IR44461 IRIS N 30mg/1mL 25-35µm 100 IR44462 IRIS N 30mg/3mL 25-35µm 100 IR44446 IRIS N 60mg/3mL 25-35µm 100 IR44264 IRIS N 100mg/3mL 25-35µm 100 IR44445 IRIS N 200mg/6mL 25-35µm 30 IR44266 IRIS N 500mg/6mL 25-35µm 30 IRIS N SPE 96-well Plates Part No. Description Particle Size Qty (Box) IR96441 IRIS N 96-well 10mg/1mL 25-35µm 1 IR96443 IRIS N 96-well 30mg/1mL 25-35µm 1 IR96445 IRIS N 96-well 60mg/1mL 25-35µm 1 IR96447 IRIS N 96-well 30mg/2mL 25-35µm 1 IR96448 IRIS N 96-well 60mg/2mL 25-35µm 1 48 [email protected] :: www.chrom4.com